68 ofertas

Año de construcción: usado
Ubicación: Land-demag ergotech compact 1000-430 / machine in excellent technical condition
built in 1994

injection unit:
screw diameter: 40 mm
shot weight: 205 g
injection pressure: 2020 bar
dispensing volume: 231. 2cc

clamping unit:
clamping force: 100 t
tie bar distance: 400 x 400 mm
size of the clamping plates: 580 x 590 mm
ejector: hydraulic
clamping unit: hydraulic

control:
nc 4

additional equipment:
machine in excellent technical condition
euromap
robot interface
core move x 1
air valve x 2
clamping unit on two piston
flash card reader
machine integrated manipulator with original demag

dimensions:
weight: 4200 kg
length/width/height: 4.2 x 1.4 x 1.9 m

drive:
pump/motor: 18.5 kw
heating power: 11 kw
cylinder heating: 29.6 kw

price: on request
DEMAG ERGOTECH COMPACT 1000-430 / MACHINE IN EXCELLENT TECHNICAL CONDITION BUILT IN 1994 INJECTION UNIT: SCREW DIAMETER: 40 MM SHOT WEIGHT: 205 G INJECTION PRESSURE: 2020 BAR DISPENSING VOLUME: 231. 2CC CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 400 X 400 MM SIZE OF THE CLAMPING PLATES: 580 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: NC 4 ADDITIONAL EQUIPMENT: MACHINE IN EXCELLENT TECHNICAL CONDITION EUROMAP ROBOT INTERFACE CORE MOVE X 1 AIR VALVE X 2 CLAMPING UNIT ON TWO PISTON FLASH CARD READER MACHINE INTEGRATED MANIPULATOR WITH ORIGINAL DEMAG DIMENSIONS: WEIGHT: 4200 KG LENGTH/WIDTH/HEIGHT: 4.2 X 1.4 X 1.9 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING POWER: 11 KW CYLINDER HEATING: 29.6 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 400 mm<br/>description: - consisting of four pieces<br> - types: kkun 5 - 500, pk 5 n-f and 2 x pk 2 n-f<br> - inventory numbers: 3710/10901/18315/34002<br> - for further information see photos WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 400 MM
DESCRIPTION: - CONSISTING OF FOUR PIECES
- TYPES: KKUN 5 - 500, PK 5 N-F AND 2 X PK 2 N-F
- INVENTORY NUMBERS: 3710/10901/18315/34002
- FOR FURTHER INFORMATION SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-demag ergotech compact 1000-310 with robots by the mark wittmann
built in 1996

injection unit:
screw diameter: 35 mm
shot weight: 149 g
injection pressure: 2020 bar
dispensing volume: 168. 3ccm

clamping unit:
clamping force: 100 t
tie bar distance: 400 x 400 mm
size of the clamping plates: 580 x 590 mm
ejector: hydraulic
clamping unit: hydraulic

control:
nc 4
additional equipment:
euromap
robot interface
core move x 1
control air valve
hot channel control

dimensions:
weight: 4200 kg
length/width/height: 4.2 x 1.4 x 1.9 m
drive:
pump/motor: 18.5 kw
heating capacity: 9.4 kw
cylinder heating: 27.9 kw

price: on request DEMAG ERGOTECH COMPACT 1000-310 WITH ROBOTS BY THE MARK WITTMANN BUILT IN 1996 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 149 G INJECTION PRESSURE: 2020 BAR DISPENSING VOLUME: 168. 3CCM CLAMPING UNIT: CLAMPING FORCE: 100 T TIE BAR DISTANCE: 400 X 400 MM SIZE OF THE CLAMPING PLATES: 580 X 590 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: NC 4 ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 CONTROL AIR VALVE HOT CHANNEL CONTROL DIMENSIONS: WEIGHT: 4200 KG LENGTH/WIDTH/HEIGHT: 4.2 X 1.4 X 1.9 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING CAPACITY: 9.4 KW CYLINDER HEATING: 27.9 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 145 kg<br/>dimensions (l x w x h) approx.: 600 x 800 x 400 mm<br/>description: electrical magnet WEIGHT APPROX.: 145 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 800 X 400 MM
DESCRIPTION: ELECTRICAL MAGNET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-demag ergotech system 4200-840
year of construction: 2001

injection unit:
screw diameter: 45 mm
shot weight: 320 g
injection pressure: 2402 bar
dispensing volume: 358 cc

clamping unit:
clamping force: 420 t
tie bar distance: 800 x 710 mm
clamping plate sizes: 1200 x 1100 mm
ejector: hydraulic
clamping unit: knee lever

control: nc 4

additional equipment:
hybrid machine
euromap
robot interface
control air valve
hydraulic core pulling x 2
auto tool installation height
central lubrication system
built-in printer to print out the machine history
it is possible to change the injection unit for a larger injection unit with screw diameter 50 mm, 60 mm, 70 mm

dimensions:
weight: 17400 kg
length/width/height: 7.9 x 2.2 x 2.5 m

drive:
pump/motor: 45 kw
heating power: 23 kw
cylinder heating: 68 kw

price: on request DEMAG ERGOTECH SYSTEM 4200-840 YEAR OF CONSTRUCTION: 2001 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 320 G INJECTION PRESSURE: 2402 BAR DISPENSING VOLUME: 358 CC CLAMPING UNIT: CLAMPING FORCE: 420 T TIE BAR DISTANCE: 800 X 710 MM CLAMPING PLATE SIZES: 1200 X 1100 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: NC 4 ADDITIONAL EQUIPMENT: HYBRID MACHINE EUROMAP ROBOT INTERFACE CONTROL AIR VALVE HYDRAULIC CORE PULLING X 2 AUTO TOOL INSTALLATION HEIGHT CENTRAL LUBRICATION SYSTEM BUILT-IN PRINTER TO PRINT OUT THE MACHINE HISTORY IT IS POSSIBLE TO CHANGE THE INJECTION UNIT FOR A LARGER INJECTION UNIT WITH SCREW DIAMETER 50 MM, 60 MM, 70 MM DIMENSIONS: WEIGHT: 17400 KG LENGTH/WIDTH/HEIGHT: 7.9 X 2.2 X 2.5 M DRIVE: PUMP/MOTOR: 45 KW HEATING POWER: 23 KW CYLINDER HEATING: 68 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 800 x 1200 x 400 mm<br/>description: consisting of 1 demag pk 5 n-f, load 1000 kg, 1 further demag pk 5 n-f, load 1000 kg, defective, 1 demag pnv 12, load 1000 kg, 1 further demag pk 1 n-f, load 125/250 kg, inventar-nr. 18757, 33574, 10454 WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1200 X 400 MM
DESCRIPTION: CONSISTING OF 1 DEMAG PK 5 N-F, LOAD 1000 KG, 1 FURTHER DEMAG PK 5 N-F, LOAD 1000 KG, DEFECTIVE, 1 DEMAG PNV 12, LOAD 1000 KG, 1 FURTHER DEMAG PK 1 N-F, LOAD 125/250 KG, INVENTAR-NR. 18757, 33574, 10454
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-brand: demag
model: ergotech 330-2300
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 1996
location: germany
origin country: germany

general data
measurements width: 6500 mm 
measurements depth: 2000 mm 
measurements height: 2300 mm 
machine weight: 15000 kg

control unit
brand: demag
model: nc4
cnc main language: german 
cnc language customizable: yes

injection unit
screw diameter: 60 mm 
shot weight: 800 g/ps s
troke volume: 891 cm3
injection pressure: 2420 bar 
heating capacity: 23 kw

clamping unit
clamping force: 3300 kn
opening stroke: 675 mm
distance between bars: 710x630 mm
mould height min: 330 mm
mould height max: 830 mm
size of mold platens: 1040x950 mm 
ejector stroke: 200 mm
ejector force for / back: 80 kn

media
main electronic connection: 400 v / 50 hz

additional equipment
1: handling demag (w322)


see full technical specifications of this machine at: abc://bit.ly/2z7qovu
 BRAND: DEMAG MODEL: ERGOTECH 330-2300 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1996 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 15000 KG CONTROL UNIT BRAND: DEMAG MODEL: NC4 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 60 MM SHOT WEIGHT: 800 G/PS S TROKE VOLUME: 891 CM3 INJECTION PRESSURE: 2420 BAR HEATING CAPACITY: 23 KW CLAMPING UNIT CLAMPING FORCE: 3300 KN OPENING STROKE: 675 MM DISTANCE BETWEEN BARS: 710X630 MM MOULD HEIGHT MIN: 330 MM MOULD HEIGHT MAX: 830 MM SIZE OF MOLD PLATENS: 1040X950 MM EJECTOR STROKE: 200 MM EJECTOR FORCE FOR / BACK: 80 KN MEDIA MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ ADDITIONAL EQUIPMENT 1: HANDLING DEMAG (W322) SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Z7QOVU
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 5000 x 800 x 400 mm<br/>description: lifting capacity 250 kg, including 1 rail mountable at the ceiling, length approx. 5000 mm WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 800 X 400 MM
DESCRIPTION: LIFTING CAPACITY 250 KG, INCLUDING 1 RAIL MOUNTABLE AT THE CEILING, LENGTH APPROX. 5000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: demag
model: ergotech 330-2300
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 1997
location: germany
origin country: germany

general data
measurements width: 6500 mm
measurements depth: 1900 mm
measurements height: 2300 mm
machine weight: 15000 kg

control unit
brand: demag
model: nc4
cnc main language: german 
cnc language customizable: yes

injection unit
shot weight: 2420 g/ps
stroke volume: 60 cm3 
injection pressure: 891 bar 
plasticising rate max: 800 g/s ps

clamping unit
clamping force: 3300 kn
opening stroke: 675 mm
distance between bars: 710x630 mm 
mould height min: 330 mm
mould height max: 830 mm
size of mold platens: 1040x950 mm 
ejector stroke: 200 mm
ejector force for / back: 80 kn

media
main electronic connection: 400 v / 50 hz 
internal cooling: yes

additional equipment
1: handling demag (w322-448) OVERVIEW BRAND: DEMAG MODEL: ERGOTECH 330-2300 APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1997 LOCATION: GERMANY ORIGIN COUNTRY: GERMANY GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2300 MM MACHINE WEIGHT: 15000 KG CONTROL UNIT BRAND: DEMAG MODEL: NC4 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SHOT WEIGHT: 2420 G/PS STROKE VOLUME: 60 CM3 INJECTION PRESSURE: 891 BAR PLASTICISING RATE MAX: 800 G/S PS CLAMPING UNIT CLAMPING FORCE: 3300 KN OPENING STROKE: 675 MM DISTANCE BETWEEN BARS: 710X630 MM MOULD HEIGHT MIN: 330 MM MOULD HEIGHT MAX: 830 MM SIZE OF MOLD PLATENS: 1040X950 MM EJECTOR STROKE: 200 MM EJECTOR FORCE FOR / BACK: 80 KN MEDIA MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: HANDLING DEMAG (W322-448)
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 4000 kg<br/>dimensions (l x w x h) approx.: 4620 x 2000 x 1960 mm<br/>description: <u><b>demag nc4 110-430 + plasdan (2 shot) injection moulding machine with atm automation loading unit</b></u>  <br> <br> - model: 1100-430<br> - year of manufacture: 1998<br> - machine number: 7171-0194<br> - comes with atm automation loading unit<br> <br> - clamping force: 110 t<br> - tonnage group: g080-125 t<br> - heating power: 15,6 kw<br> - pump power: 22 kw<br> - total power: 37,6 kw<br> - screw diameter: b 40<br> - cylinder head volume: 231,2 cm³<br> - screw type: reinforced<br> - max injection pressure: 189/2079 bar<br> - max screw rotation: 500/450<br> - nozzle: m60 x 3 mm<br> - cores number: 2<br> - pneumatic valves number: 2<br> - platen guide type: column<br> - distance between columns: 450 mm<br> - mould mounting high max: - , min: 250 mm<br> - opening stroke: 600 mm<br> - max mould weight: 1000 kg<br> <br> <b><u>the article must be picked up till 12/15/2018!</u></b> WEIGHT APPROX.: 4000 KG
DIMENSIONS (L X W X H) APPROX.: 4620 X 2000 X 1960 MM
DESCRIPTION: DEMAG NC4 110-430 + PLASDAN (2 SHOT) INJECTION MOULDING MACHINE WITH ATM AUTOMATION LOADING UNIT

- MODEL: 1100-430
- YEAR OF MANUFACTURE: 1998
- MACHINE NUMBER: 7171-0194
- COMES WITH ATM AUTOMATION LOADING UNIT

- CLAMPING FORCE: 110 T
- TONNAGE GROUP: G080-125 T
- HEATING POWER: 15,6 KW
- PUMP POWER: 22 KW
- TOTAL POWER: 37,6 KW
- SCREW DIAMETER: B 40
- CYLINDER HEAD VOLUME: 231,2 CM³
- SCREW TYPE: REINFORCED
- MAX INJECTION PRESSURE: 189/2079 BAR
- MAX SCREW ROTATION: 500/450
- NOZZLE: M60 X 3 MM
- CORES NUMBER: 2
- PNEUMATIC VALVES NUMBER: 2
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 450 MM
- MOULD MOUNTING HIGH MAX: - , MIN: 250 MM
- OPENING STROKE: 600 MM
- MAX MOULD WEIGHT: 1000 KG

THE ARTICLE MUST BE PICKED UP TILL 12/15/2018!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gebr. electr. chain hoist make demag
	model dkun5-500 kv2f4. no.: 61610672 year of production 1993

lifting capacity 500/1000 kg
	hook path:
	2-line 1000 kg 2000 mm
		1-line 500 kg 4000 mm
	main hoist 6.3 m / min
	fine hub 1.5 m / min
	engine 1.7/0.42 kw
	power supply 400 v
	chain 5 x 15 80 k
	2-stranded
 GEBR. ELECTR. CHAIN HOIST MAKE DEMAG MODEL DKUN5-500 KV2F4. NO.: 61610672 YEAR OF PRODUCTION 1993 LIFTING CAPACITY 500/1000 KG HOOK PATH: 2-LINE 1000 KG 2000 MM 1-LINE 500 KG 4000 MM MAIN HOIST 6.3 M / MIN FINE HUB 1.5 M / MIN ENGINE 1.7/0.42 KW POWER SUPPLY 400 V CHAIN 5 X 15 80 K 2-STRANDED
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 2.100 €
Ubicación: Land-weight approx.: 10500 kg<br/>dimensions (l x w x h) approx.: 6860 x 1680 x 2150 mm<br/>description: <b><u>demag d 200-730 nciii injection moulding machine</u></b> <br> <br> - model: d 200-730 nciii<br> - year of manufacture: 1992<br> - machine number: 817-0189<br> - comes with atm automation loading unit<br> <br> - clamping force: 200 t<br> - tonnage group: g160-270 t<br> - heating power: 16 kw<br> - pump power: 30 kw<br> - total power: 46 kw<br> - screw diameter: b 52<br> - cylinder head volume: 400 cm³<br> - screw type: reinforced<br> - max injection pressure: 160 bar<br> - max screw rotation: 63 steps<br> - nozzle: m60 x 3 mm<br> - cores number: 6<br> - pneumatic valves number: 1<br> - platen guide type: column<br> - distance between columns: 560 mm<br> - mould mounting high max: 610 mm - min: 310 mm<br> - opening stroke: 550 mm<br> <br> <b><u>the article must be picked up till 12/15/2018!</u></b> WEIGHT APPROX.: 10500 KG
DIMENSIONS (L X W X H) APPROX.: 6860 X 1680 X 2150 MM
DESCRIPTION: DEMAG D 200-730 NCIII INJECTION MOULDING MACHINE

- MODEL: D 200-730 NCIII
- YEAR OF MANUFACTURE: 1992
- MACHINE NUMBER: 817-0189
- COMES WITH ATM AUTOMATION LOADING UNIT

- CLAMPING FORCE: 200 T
- TONNAGE GROUP: G160-270 T
- HEATING POWER: 16 KW
- PUMP POWER: 30 KW
- TOTAL POWER: 46 KW
- SCREW DIAMETER: B 52
- CYLINDER HEAD VOLUME: 400 CM³
- SCREW TYPE: REINFORCED
- MAX INJECTION PRESSURE: 160 BAR
- MAX SCREW ROTATION: 63 STEPS
- NOZZLE: M60 X 3 MM
- CORES NUMBER: 6
- PNEUMATIC VALVES NUMBER: 1
- PLATEN GUIDE TYPE: COLUMN
- DISTANCE BETWEEN COLUMNS: 560 MM
- MOULD MOUNTING HIGH MAX: 610 MM - MIN: 310 MM
- OPENING STROKE: 550 MM

THE ARTICLE MUST BE PICKED UP TILL 12/15/2018!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: demag
model: d240-1990 nc iii
application type: injection moulding 
machine type: injection moulding machines 
availability: immediately
production year: 2004
location: india
origin country: germany
production hours: 35000

general data
measurements width: 7000 mm 
measurements depth: 1900 mm 
measurements height: 2100 mm 
machine weight: 13650 kg

control unit
brand: devansi
cnc main language: english 
cnc language customizable: yes

injection unit
screw diameter: 70 mm
shot weight: 1130 g/ps
stroke volume: 1212 cm³
injection pressure: 1877 bar
plasticising rate max: 600 g/s ps

clamping unit
clamping force: 280 kn

media
main electronic connection: 400 v 
power consumption: 37 kva

see full technical specifications of this machine at:
abc://bit.ly/2onkuol OVERVIEW BRAND: DEMAG MODEL: D240-1990 NC III APPLICATION TYPE: INJECTION MOULDING MACHINE TYPE: INJECTION MOULDING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: GERMANY PRODUCTION HOURS: 35000 GENERAL DATA MEASUREMENTS WIDTH: 7000 MM MEASUREMENTS DEPTH: 1900 MM MEASUREMENTS HEIGHT: 2100 MM MACHINE WEIGHT: 13650 KG CONTROL UNIT BRAND: DEVANSI CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES INJECTION UNIT SCREW DIAMETER: 70 MM SHOT WEIGHT: 1130 G/PS STROKE VOLUME: 1212 CM³ INJECTION PRESSURE: 1877 BAR PLASTICISING RATE MAX: 600 G/S PS CLAMPING UNIT CLAMPING FORCE: 280 KN MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 37 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2ONKUOL
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-grinding length:500 mm<br/>grinding width:250 mm<br/>workpiece height:375 mm<br/>table clamping surface lxw:760x200 mm<br/>:500x250 mm<br/>distance between  table/spindle:525 mm<br/>:2-28 m/min<br/>:1,2 m/min<br/>:1-30 mm/hub<br/>:0,02 mm<br/>vertical feed autom.:0,002-0,06 mm<br/>:0,15 m/min<br/>:0,02 mm<br/>:0,001 mm<br/>:1400/2800 1/min<br/>diameter / bore of grinding wheel:300/76,2 mm<br/>grinding wheel wide min./max.:25/30 mm<br/>:3,7/4,5 kw<br/>hydraulic pump:1,5 kw<br/>:0,1 kw<br/>vertical feed motor:1,7 kw<br/>wet grinding attachment:0,15 kw<br/>:1600 kg<br/>:1,9x1,5x1,95 m<br/><br/>used surface grinding machine, make elb, hahn & kolb, type orion 525 nd, built in 1981, machine no .: 17650 (49564)  machine with automatic infeed in all 3 axes.  machine cleaned thoroughly and by qualified technician to complete. functioning checked.  machine in perfect, produktionsbereitem condition.  accessories: - electric - magnetic - chipboard with fine straight pole division, size 500x250mm - demagnetizing - schleifscheibenabrichtgerät, mounted on the grinding wheel, manually operated - wet grinding - 1 piece grinding wheel - 1 set of machine setting up / alignment - 1 piece halogen machine luminaire - technical documentation in german  more details: description design nd digital display for y-axis  payment: 100% before loading the machine warranty: no GRINDING LENGTH:500 MM
GRINDING WIDTH:250 MM
WORKPIECE HEIGHT:375 MM
TABLE CLAMPING SURFACE LXW:760X200 MM
:500X250 MM
DISTANCE BETWEEN TABLE/SPINDLE:525 MM
:2-28 M/MIN
:1,2 M/MIN
:1-30 MM/HUB
:0,02 MM
VERTICAL FEED AUTOM.:0,002-0,06 MM
:0,15 M/MIN
:0,02 MM
:0,001 MM
:1400/2800 1/MIN
DIAMETER / BORE OF GRINDING WHEEL:300/76,2 MM
GRINDING WHEEL WIDE MIN./MAX.:25/30 MM
:3,7/4,5 KW
HYDRAULIC PUMP:1,5 KW
:0,1 KW
VERTICAL FEED MOTOR:1,7 KW
WET GRINDING ATTACHMENT:0,15 KW
:1600 KG
:1,9X1,5X1,95 M

USED SURFACE GRINDING MACHINE, MAKE ELB, HAHN & KOLB, TYPE ORION 525 ND, BUILT IN 1981, MACHINE NO .: 17650 (49564) MACHINE WITH AUTOMATIC INFEED IN ALL 3 AXES. MACHINE CLEANED THOROUGHLY AND BY QUALIFIED TECHNICIAN TO COMPLETE. FUNCTIONING CHECKED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM CONDITION. ACCESSORIES: - ELECTRIC - MAGNETIC - CHIPBOARD WITH FINE STRAIGHT POLE DIVISION, SIZE 500X250MM - DEMAGNETIZING - SCHLEIFSCHEIBENABRICHTGERäT, MOUNTED ON THE GRINDING WHEEL, MANUALLY OPERATED - WET GRINDING - 1 PIECE GRINDING WHEEL - 1 SET OF MACHINE SETTING UP / ALIGNMENT - 1 PIECE HALOGEN MACHINE LUMINAIRE - TECHNICAL DOCUMENTATION IN GERMAN MORE DETAILS: DESCRIPTION DESIGN ND DIGITAL DISPLAY FOR Y-AXIS PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-second-hand machine bj. 2005 (inv. 4480)

clamping force: 800 kn
holmabstand(h x v): 420 x 420 mm
opening stroke: 700 mm mould installation height: 250 mm
maximum tool height: 350 mm

screw diameter: 18 / 18 mm l/d ratio: 22
suitable for the processing of: pa spec. injection pressure: 2600 bar
maximum shot weight: 19 g / 19 g

power supply: 400 v 117a 50 - 60 hz
performance: 83kw
heating power: not available
machine size (lxwxh): 4.30 m x 1.40 m x 3.20 m

SECOND-HAND MACHINE BJ. 2005 (INV. 4480) CLAMPING FORCE: 800 KN HOLMABSTAND(H X V): 420 X 420 MM OPENING STROKE: 700 MM MOULD INSTALLATION HEIGHT: 250 MM MAXIMUM TOOL HEIGHT: 350 MM SCREW DIAMETER: 18 / 18 MM L/D RATIO: 22 SUITABLE FOR THE PROCESSING OF: PA SPEC. INJECTION PRESSURE: 2600 BAR MAXIMUM SHOT WEIGHT: 19 G / 19 G POWER SUPPLY: 400 V 117A 50 - 60 HZ PERFORMANCE: 83KW HEATING POWER: NOT AVAILABLE MACHINE SIZE (LXWXH): 4.30 M X 1.40 M X 3.20 M
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Precio: 798.000 €
Ubicación: Land-; mileage [km]: 16202; gross weight [kg]: 72620; registration number: wmg6315h9bz010068; rear tyres remaining: 80; front tyres remaining: 80; lift height[mm]: 6400; maximum lift capacity [kg]: 350000 ; MILEAGE [KM]: 16202; GROSS WEIGHT [KG]: 72620; REGISTRATION NUMBER: WMG6315H9BZ010068; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 80; LIFT HEIGHT[MM]: 6400; MAXIMUM LIFT CAPACITY [KG]: 350000
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-second-hand machine bj. 1999 (inv. 3081)

hours of operation: 64736,6
machine cycles: 4989580
control: nc 4
performance data: 50 t

clamping force: 500 kn
tie bar spacing (h x v): 355 x 355 mm
opening stroke: 610 mm tool height: 210 mm
maximum tool height: 410 mm

screw diameter: 22 mm l/d ratio: 20
suitable for the processing of: pa spec. injection pressure: 2400 bar
maximum shot weight: 36 g		
 SECOND-HAND MACHINE BJ. 1999 (INV. 3081) HOURS OF OPERATION: 64736,6 MACHINE CYCLES: 4989580 CONTROL: NC 4 PERFORMANCE DATA: 50 T CLAMPING FORCE: 500 KN TIE BAR SPACING (H X V): 355 X 355 MM OPENING STROKE: 610 MM TOOL HEIGHT: 210 MM MAXIMUM TOOL HEIGHT: 410 MM SCREW DIAMETER: 22 MM L/D RATIO: 20 SUITABLE FOR THE PROCESSING OF: PA SPEC. INJECTION PRESSURE: 2400 BAR MAXIMUM SHOT WEIGHT: 36 G
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 160 kg<br/>dimensions (l x w x h) approx.: 4000x800x600 mm<br/>description: with electric equipment, load 250 kg, 1 piece WEIGHT APPROX.: 160 KG
DIMENSIONS (L X W X H) APPROX.: 4000X800X600 MM
DESCRIPTION: WITH ELECTRIC EQUIPMENT, LOAD 250 KG, 1 PIECE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.500 €
Ubicación: Land-second-hand machine bj. 1999 (inv. 3080)

hours of operation: 69236,4
machine cycles: 4505643
control: nc 4
performance data: 80 t

screw diameter: 30 mm l/d ratio: 20
suitable for the processing of: pa spec. injection pressure: 1460 bar
maximum shot weight: 98 g power supply: 50 hz 400 v 83a
performance: 59kw
heating power: 7, 50kw
machine size approx. (lxwxh): 3.88 m x 1.4 m x 1.83 m

SECOND-HAND MACHINE BJ. 1999 (INV. 3080) HOURS OF OPERATION: 69236,4 MACHINE CYCLES: 4505643 CONTROL: NC 4 PERFORMANCE DATA: 80 T SCREW DIAMETER: 30 MM L/D RATIO: 20 SUITABLE FOR THE PROCESSING OF: PA SPEC. INJECTION PRESSURE: 1460 BAR MAXIMUM SHOT WEIGHT: 98 G POWER SUPPLY: 50 HZ 400 V 83A PERFORMANCE: 59KW HEATING POWER: 7, 50KW MACHINE SIZE APPROX. (LXWXH): 3.88 M X 1.4 M X 1.83 M
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Precio: 875.000 €
Ubicación: Land-; mileage [km]: 17382; gross weight [kg]: 72880; registration number: wmg6315h5bz010066; rear tyres remaining: 80; front tyres remaining: 80; lift height[mm]: 6400; maximum lift capacity [kg]: 350000 ; MILEAGE [KM]: 17382; GROSS WEIGHT [KG]: 72880; REGISTRATION NUMBER: WMG6315H5BZ010066; REAR TYRES REMAINING: 80; FRONT TYRES REMAINING: 80; LIFT HEIGHT[MM]: 6400; MAXIMUM LIFT CAPACITY [KG]: 350000
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-second-hand machine bj. 2004

hours of operation: 106715,7
machine cycles: 16322519
control: ergocontrol nc 4
performance data: 100 t

clamping force: 1000 kn
holmabstand(h x v): 420 x 420 mm
opening stroke: 910 mm tool height: 200 mm
maximum tool height: 530 mm

screw diameter: 25 mm l/d ratio: 22
suitable for the processing of: pa spec. injection pressure: 2800 bar
maximum shot weight: 48 g power supply: 400v 84a 50 hz
performance: 59kw
heating capacity: 8, 3kw
machine size (lxwxh): 4, 77 m x 1.33 m x 2.09 m

SECOND-HAND MACHINE BJ. 2004 HOURS OF OPERATION: 106715,7 MACHINE CYCLES: 16322519 CONTROL: ERGOCONTROL NC 4 PERFORMANCE DATA: 100 T CLAMPING FORCE: 1000 KN HOLMABSTAND(H X V): 420 X 420 MM OPENING STROKE: 910 MM TOOL HEIGHT: 200 MM MAXIMUM TOOL HEIGHT: 530 MM SCREW DIAMETER: 25 MM L/D RATIO: 22 SUITABLE FOR THE PROCESSING OF: PA SPEC. INJECTION PRESSURE: 2800 BAR MAXIMUM SHOT WEIGHT: 48 G POWER SUPPLY: 400V 84A 50 HZ PERFORMANCE: 59KW HEATING CAPACITY: 8, 3KW MACHINE SIZE (LXWXH): 4, 77 M X 1.33 M X 2.09 M
Vendedor: WAGO Kontakttechnik GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-grinding length: 700 mm<br/>grinding width: 350 mm<br/>workpiece height: 570 mm<br/>magnetic clamping plate, electical: 300 x 700 mm<br/>table load: 560 kg.<br/>turning speeds: 1.400/2.800 u/min<br/>grinding wheel size: 300x50x76 mm<br/>total power requirement: 8,5 kw<br/>weight of the machine ca.: 2.700 kg.<br/>grinding range	400 x 900	mm<br/>working height under grinding spindle, approx.	400	mm<br/>cross travel, max.	350	mm<br/>grinding wheel Ø x width, approx.	300 x 50	mm<br/>grinding wheel speeds	1,400 and 2,800	rpm<br/>table speeds	2 - 30	m/min<br/><br/>cross infeed, electrical	2 - 65	mm/stroke<br/><br/>spindle drive, approx.	7.5	kw<br/>total electrical load	11 kw  -  380 v  -  50	hz<br/>weight	4,000 	kg<br/><br/>accessories / special features<br/>*	finimatic grinding head vertical infeed with automatic switch-off.  infeed speeds can be set in 9 steps with sparkout stroke.<br/>*	digital display for the vertical axis.<br/>*	manually operated straight dressing device, mounted above grinding wheel.<br/>*	vertical rapid traverse of grinding slide.<br/>*	magnetic chuck, approx. 300 x 900 mm, with adhesive force control and demagnetising device.<br/>*	2 separate flanges with grinding wheels.  <br/>*	grinding spindle lubrication is via a built-on aggregate with filter.<br/>*	table locking device, balancing mandrel, work lamps, etc.<br/><br/>price, ex stock                                                                  eur ______<br/><br/>condition  :    good for its age.  machine can soon be inspected under power.<br/>delivery     :    ex stock as inspected.                            <br/>payment     :   net, after conclusion of contract.<br/><br/>thank you for your interest.  <br/>we have selection of surface grinders available.  please let us know your requirements.<br/><br/><br/><br/> GRINDING LENGTH: 700 MM
GRINDING WIDTH: 350 MM
WORKPIECE HEIGHT: 570 MM
MAGNETIC CLAMPING PLATE, ELECTICAL: 300 X 700 MM
TABLE LOAD: 560 KG.
TURNING SPEEDS: 1.400/2.800 U/MIN
GRINDING WHEEL SIZE: 300X50X76 MM
TOTAL POWER REQUIREMENT: 8,5 KW
WEIGHT OF THE MACHINE CA.: 2.700 KG.
GRINDING RANGE 400 X 900 MM
WORKING HEIGHT UNDER GRINDING SPINDLE, APPROX. 400 MM
CROSS TRAVEL, MAX. 350 MM
GRINDING WHEEL Ø X WIDTH, APPROX. 300 X 50 MM
GRINDING WHEEL SPEEDS 1,400 AND 2,800 RPM
TABLE SPEEDS 2 - 30 M/MIN

CROSS INFEED, ELECTRICAL 2 - 65 MM/STROKE

SPINDLE DRIVE, APPROX. 7.5 KW
TOTAL ELECTRICAL LOAD 11 KW - 380 V - 50 HZ
WEIGHT 4,000 KG

ACCESSORIES / SPECIAL FEATURES
* FINIMATIC GRINDING HEAD VERTICAL INFEED WITH AUTOMATIC SWITCH-OFF. INFEED SPEEDS CAN BE SET IN 9 STEPS WITH SPARKOUT STROKE.
* DIGITAL DISPLAY FOR THE VERTICAL AXIS.
* MANUALLY OPERATED STRAIGHT DRESSING DEVICE, MOUNTED ABOVE GRINDING WHEEL.
* VERTICAL RAPID TRAVERSE OF GRINDING SLIDE.
* MAGNETIC CHUCK, APPROX. 300 X 900 MM, WITH ADHESIVE FORCE CONTROL AND DEMAGNETISING DEVICE.
* 2 SEPARATE FLANGES WITH GRINDING WHEELS.
* GRINDING SPINDLE LUBRICATION IS VIA A BUILT-ON AGGREGATE WITH FILTER.
* TABLE LOCKING DEVICE, BALANCING MANDREL, WORK LAMPS, ETC.

PRICE, EX STOCK EUR ______

CONDITION : GOOD FOR ITS AGE. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK AS INSPECTED.
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT.

THANK YOU FOR YOUR INTEREST.
WE HAVE SELECTION OF SURFACE GRINDERS AVAILABLE. PLEASE LET US KNOW YOUR REQUIREMENTS.



Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-demag electric injection moulding machine 
type intelect 210/580-100 
clamp 2100
tie bar 580 
injection unit 1000
control cdias
year 2007
series 4
400v
50hz 153a DEMAG ELECTRIC INJECTION MOULDING MACHINE TYPE INTELECT 210/580-100 CLAMP 2100 TIE BAR 580 INJECTION UNIT 1000 CONTROL CDIAS YEAR 2007 SERIES 4 400V 50HZ 153A
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-material gripper, manipulator, lifting aid, lifting device, hoist, demag - kbk<br /><br />-manipulator with 5 axes<br />-pneumatic gripper capacity 40 kg<br />-pneumatic gripper swiveling / rotating<br />-1x transport dimensions 1170/330 / h480 mm<br />-1x transport dimensions 7050/800/h400 mm<br />-weight 504 kg MATERIAL GRIPPER, MANIPULATOR, LIFTING AID, LIFTING DEVICE, HOIST, DEMAG - KBK

-MANIPULATOR WITH 5 AXES
-PNEUMATIC GRIPPER CAPACITY 40 KG
-PNEUMATIC GRIPPER SWIVELING / ROTATING
-1X TRANSPORT DIMENSIONS 1170/330 / H480 MM
-1X TRANSPORT DIMENSIONS 7050/800/H400 MM
-WEIGHT 504 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-injection moulding machine demag ergotech 200 - 840 compact
warehouse no.: 	502664
manufacturer: 	demag
typ:	ergotech 200 - 840 compact
controller unit:	nc4
year of construction:	2000

technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	toggle
method of construction:	four tie bars
clamping force:	2000	kn
distance between tie bars h:	560	mm
distance between tie bars v:	560	mm
size of mould plates h:	830	mm
size of mould plates v:	830	mm
min. mould height:	310	mm
max. mould height:	660	mm
max. open daylight:	1235	mm
opening stroke:	575	mm
ejector stroke:	180	mm
ejector force:	69	kn
centring device diameter of moving platen:	160	mm
centring device diameter of fixed platen:	160	mm
mould weight:	2500	kg

technical data:injection unit
screw diameter:	50	mm
swept volume:	442	ccm
injection pressure:	1946	bar
screw length:	20	l/d
screw stroke:	225	mm
screw rotation:	277	min
plasticising rate:	48	g/s ps
injection rate into the open:	270	g/s ps
number of heating zones:	5	
nozzle contact force:	80	kn
nozzle stroke:	400	mm

measure & weight
measures of machine lxbxh:	6.1m x 1.7m x 2.1m
total weight:	8000kg

equipment included


    ? pressure accumulator for uprated injection speed
    ? core pulling hydraulically 2x
    ? air valve 3x
    ? electric interface for handling units according to euromap 12
    ? schuko-socket 10a
    ? screen text german
    ? cee-socket 16a
    ? anti vibration mounts
    ? machine without material hopper
    ? machine incl. water flow regulator  INJECTION MOULDING MACHINE DEMAG ERGOTECH 200 - 840 COMPACT WAREHOUSE NO.: 502664 MANUFACTURER: DEMAG TYP: ERGOTECH 200 - 840 COMPACT CONTROLLER UNIT: NC4 YEAR OF CONSTRUCTION: 2000 TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: TOGGLE METHOD OF CONSTRUCTION: FOUR TIE BARS CLAMPING FORCE: 2000 KN DISTANCE BETWEEN TIE BARS H: 560 MM DISTANCE BETWEEN TIE BARS V: 560 MM SIZE OF MOULD PLATES H: 830 MM SIZE OF MOULD PLATES V: 830 MM MIN. MOULD HEIGHT: 310 MM MAX. MOULD HEIGHT: 660 MM MAX. OPEN DAYLIGHT: 1235 MM OPENING STROKE: 575 MM EJECTOR STROKE: 180 MM EJECTOR FORCE: 69 KN CENTRING DEVICE DIAMETER OF MOVING PLATEN: 160 MM CENTRING DEVICE DIAMETER OF FIXED PLATEN: 160 MM MOULD WEIGHT: 2500 KG TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 50 MM SWEPT VOLUME: 442 CCM INJECTION PRESSURE: 1946 BAR SCREW LENGTH: 20 L/D SCREW STROKE: 225 MM SCREW ROTATION: 277 MIN PLASTICISING RATE: 48 G/S PS INJECTION RATE INTO THE OPEN: 270 G/S PS NUMBER OF HEATING ZONES: 5 NOZZLE CONTACT FORCE: 80 KN NOZZLE STROKE: 400 MM MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 6.1M X 1.7M X 2.1M TOTAL WEIGHT: 8000KG EQUIPMENT INCLUDED ? PRESSURE ACCUMULATOR FOR UPRATED INJECTION SPEED ? CORE PULLING HYDRAULICALLY 2X ? AIR VALVE 3X ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 ? SCHUKO-SOCKET 10A ? SCREEN TEXT GERMAN ? CEE-SOCKET 16A ? ANTI VIBRATION MOUNTS ? MACHINE WITHOUT MATERIAL HOPPER ? MACHINE INCL. WATER FLOW REGULATOR
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-grinding length:700 mm<br/>grinding width:400 mm<br/>workpiece height:350 mm<br/>surface area:1100x300 mm<br/>spindle drive:6,8 ps<br/>hydraulic pump engine:2 ps<br/>cross feed motor:0,33 ps<br/>:1800x1200 mm<br/>grinding wheel speeds:1400 u/min<br/>total power requirement:11 kw<br/>weight of the machine ca.:3100 kg<br/><br/>used / overhauled surface grinding machine, make elb, type swb 06 va ii-k, machine no. 114461172  machine with automatic notification in all 3 axes.  machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. wear parts replaced defective components reparariert or replaced. reassembly, compl. functional testing and internal loss. machine in absolute working condition. machine repainted. machine in perfect, produktionsbereitem state.  accessories: - electric magnetic chuck with coarse / fine pole pitch, dimensions 600x500 mm - demagnetisiereinrichtung installed in the control cabinet - manual micrometric abrichtapparat mounted above the grinding wheel - 1 piece grinding wheel - complete coolant system - setting up / leveling -. technical documentation in german  all machines are connected prior to delivery, tested and verified all of the functions.  payment: 100% before loading the machine warranty: no  fig. similar. GRINDING LENGTH:700 MM
GRINDING WIDTH:400 MM
WORKPIECE HEIGHT:350 MM
SURFACE AREA:1100X300 MM
SPINDLE DRIVE:6,8 PS
HYDRAULIC PUMP ENGINE:2 PS
CROSS FEED MOTOR:0,33 PS
:1800X1200 MM
GRINDING WHEEL SPEEDS:1400 U/MIN
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:3100 KG

USED / OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWB 06 VA II-K, MACHINE NO. 114461172 MACHINE WITH AUTOMATIC NOTIFICATION IN ALL 3 AXES. MACHINE COMPLETELY DISMANTLED, CLEANED ALL THE COMPONENTS THOROUGHLY AND CHECKED FOR COMPLETE FUNCTIONALITY. WEAR PARTS REPLACED DEFECTIVE COMPONENTS REPARARIERT OR REPLACED. REASSEMBLY, COMPL. FUNCTIONAL TESTING AND INTERNAL LOSS. MACHINE IN ABSOLUTE WORKING CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT, PRODUKTIONSBEREITEM STATE. ACCESSORIES: - ELECTRIC MAGNETIC CHUCK WITH COARSE / FINE POLE PITCH, DIMENSIONS 600X500 MM - DEMAGNETISIEREINRICHTUNG INSTALLED IN THE CONTROL CABINET - MANUAL MICROMETRIC ABRICHTAPPARAT MOUNTED ABOVE THE GRINDING WHEEL - 1 PIECE GRINDING WHEEL - COMPLETE COOLANT SYSTEM - SETTING UP / LEVELING -. TECHNICAL DOCUMENTATION IN GERMAN ALL MACHINES ARE CONNECTED PRIOR TO DELIVERY, TESTED AND VERIFIED ALL OF THE FUNCTIONS. PAYMENT: 100% BEFORE LOADING THE MACHINE WARRANTY: NO FIG. SIMILAR.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-demag ergotech 80-420-200 system for sale
warehouse no.: 	502629
manufacturer: 	demag
typ:	ergotech 80-420-200 system
controller unit:	nc4
year of construction:	2003
operating hours:	34000 h

do you need one used demag ergotech 80 / 420-200 system with only approx. 34,000 operating hours? on request, we can make you our non-binding offer. in order to ensure the functionality of the used injection molding machine, we will check the operation of the machine with the sumitomo-demag service. afterwards, this machine will be repaired and can be inspect by you during dry-cycle test run.

technical data: clamping unit
type of drive:	fully hydraulically
clamping type:	fully hydraulic
method of construction:	four tie bars
clamping force:	800	kn
distance between tie bars h:	420	mm
distance between tie bars v:	420	mm
size of mould plates h:	590	mm
size of mould plates v:	600	mm
min. mould height:	250	mm
max. open daylight:	700	mm
opening stroke:	450	mm
ejector stroke:	150	mm
ejector force:	41	kn
centring device diameter of moving platen:	125	mm
centring device diameter of fixed platen:	125	mm
mould weight:	700	kg

technical data:injection unit
screw diameter:	30	mm
swept volume:	106	ccm
injection pressure:	1900	bar
screw length:	20	l/d
screw stroke:	150	mm
number of heating zones:	4	
nozzle contact force:	60	kn
nozzle stroke:	200	mm

measure & weight
measures of machine lxbxh:	4.27m x 1.4m x 2m
total weight:	4000kg

equipment included


    ? electric interface for handling units according to euromap 12
    ? incl. spruepicker
    ? wear-resistant injection unit
    ? core pulling hydraulically 1x
    ? screw extremely wear resistant and corrosion resistant
    ? schuko-socket 10a
    ? anti vibration mounts
    ? machine without material hopper
    ? cee-socket 16a
    ? air valve 1x
    ? machine incl. water flow regulator
    ? screen text german 	 DEMAG ERGOTECH 80-420-200 SYSTEM FOR SALE WAREHOUSE NO.: 502629 MANUFACTURER: DEMAG TYP: ERGOTECH 80-420-200 SYSTEM CONTROLLER UNIT: NC4 YEAR OF CONSTRUCTION: 2003 OPERATING HOURS: 34000 H DO YOU NEED ONE USED DEMAG ERGOTECH 80 / 420-200 SYSTEM WITH ONLY APPROX. 34,000 OPERATING HOURS? ON REQUEST, WE CAN MAKE YOU OUR NON-BINDING OFFER. IN ORDER TO ENSURE THE FUNCTIONALITY OF THE USED INJECTION MOLDING MACHINE, WE WILL CHECK THE OPERATION OF THE MACHINE WITH THE SUMITOMO-DEMAG SERVICE. AFTERWARDS, THIS MACHINE WILL BE REPAIRED AND CAN BE INSPECT BY YOU DURING DRY-CYCLE TEST RUN. TECHNICAL DATA: CLAMPING UNIT TYPE OF DRIVE: FULLY HYDRAULICALLY CLAMPING TYPE: FULLY HYDRAULIC METHOD OF CONSTRUCTION: FOUR TIE BARS CLAMPING FORCE: 800 KN DISTANCE BETWEEN TIE BARS H: 420 MM DISTANCE BETWEEN TIE BARS V: 420 MM SIZE OF MOULD PLATES H: 590 MM SIZE OF MOULD PLATES V: 600 MM MIN. MOULD HEIGHT: 250 MM MAX. OPEN DAYLIGHT: 700 MM OPENING STROKE: 450 MM EJECTOR STROKE: 150 MM EJECTOR FORCE: 41 KN CENTRING DEVICE DIAMETER OF MOVING PLATEN: 125 MM CENTRING DEVICE DIAMETER OF FIXED PLATEN: 125 MM MOULD WEIGHT: 700 KG TECHNICAL DATA:INJECTION UNIT SCREW DIAMETER: 30 MM SWEPT VOLUME: 106 CCM INJECTION PRESSURE: 1900 BAR SCREW LENGTH: 20 L/D SCREW STROKE: 150 MM NUMBER OF HEATING ZONES: 4 NOZZLE CONTACT FORCE: 60 KN NOZZLE STROKE: 200 MM MEASURE & WEIGHT MEASURES OF MACHINE LXBXH: 4.27M X 1.4M X 2M TOTAL WEIGHT: 4000KG EQUIPMENT INCLUDED ? ELECTRIC INTERFACE FOR HANDLING UNITS ACCORDING TO EUROMAP 12 ? INCL. SPRUEPICKER ? WEAR-RESISTANT INJECTION UNIT ? CORE PULLING HYDRAULICALLY 1X ? SCREW EXTREMELY WEAR RESISTANT AND CORROSION RESISTANT ? SCHUKO-SOCKET 10A ? ANTI VIBRATION MOUNTS ? MACHINE WITHOUT MATERIAL HOPPER ? CEE-SOCKET 16A ? AIR VALVE 1X ? MACHINE INCL. WATER FLOW REGULATOR ? SCREEN TEXT GERMAN
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-screw size: 18 mm<br/>injection shot weight in polysterol: 20 g/ps<br/>closing pressure: 350 kn<br/>opening stroke: 350 mm<br/>mould space: 180 mm<br/>tool clamping area: 410x410 mm<br/>weight of tools max.: 230 kg<br/>ejector path: 100 mm<br/>capacity of ejector: 26,4 kn<br/>injection pressure: 2400 bar<br/>total power requirement: 15,5 kw<br/>weight of the machine ca.: 2,1 t<br/>dimensions of the machine ca.: 3,2x1,3x1,8 m<br/><br/><br/><br/><br/> SCREW SIZE: 18 MM
INJECTION SHOT WEIGHT IN POLYSTEROL: 20 G/PS
CLOSING PRESSURE: 350 KN
OPENING STROKE: 350 MM
MOULD SPACE: 180 MM
TOOL CLAMPING AREA: 410X410 MM
WEIGHT OF TOOLS MAX.: 230 KG
EJECTOR PATH: 100 MM
CAPACITY OF EJECTOR: 26,4 KN
INJECTION PRESSURE: 2400 BAR
TOTAL POWER REQUIREMENT: 15,5 KW
WEIGHT OF THE MACHINE CA.: 2,1 T
DIMENSIONS OF THE MACHINE CA.: 3,2X1,3X1,8 M




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-wall jib crane
dc-com de mag 2-250 1/1 h4 v6/1.5

-rpm 695 / 2880
-hook path 4.0 m

operating voltage: 400
dimensions: 300 x 60 x 50 mm (d x w x 50 cm)
weight: 250 kg
 WALL JIB CRANE DC-COM DE MAG 2-250 1/1 H4 V6/1.5 -RPM 695 / 2880 -HOOK PATH 4.0 M OPERATING VOLTAGE: 400 DIMENSIONS: 300 X 60 X 50 MM (D X W X 50 CM) WEIGHT: 250 KG
Vendedor: RAG Mining Solutions GmbH
Año de construcción: usado
Ubicación: Land-lifting capacity in kg: 125 kg,arm length: m,swival range  : starr °,arm length: 3250 mm,: 3800 mm,lifting speed - idle lift downwards: > 8 m/min,electr. connected load: 400 v,connection electric: ca. 1,5 kw,protection class: ip 54,dimensions l x w x h: traverse:3,6x1,7x2,0 m,wall travelling jib crane  application: lifting and lowering of loads consists of: (similar as shown in the picture) electric chain hoist lifkett with loading hook Ø = 30x100mm, single-stranded, travel distance 1600mm, travel speed approx. 16m / min chasis demag type zbf 63 a 8/2 b004, travel speed 1 m / min without manual control unit  equipment:  - 25 meters crane runway (tt-beams) - 25 meters electric rails - angle wall mounting LIFTING CAPACITY IN KG: 125 KG,ARM LENGTH: M,SWIVAL RANGE : STARR °,ARM LENGTH: 3250 MM,: 3800 MM,LIFTING SPEED - IDLE LIFT DOWNWARDS: > 8 M/MIN,ELECTR. CONNECTED LOAD: 400 V,CONNECTION ELECTRIC: CA. 1,5 KW,PROTECTION CLASS: IP 54,DIMENSIONS L X W X H: TRAVERSE:3,6X1,7X2,0 M,WALL TRAVELLING JIB CRANE APPLICATION: LIFTING AND LOWERING OF LOADS CONSISTS OF: (SIMILAR AS SHOWN IN THE PICTURE) ELECTRIC CHAIN HOIST LIFKETT WITH LOADING HOOK Ø = 30X100MM, SINGLE-STRANDED, TRAVEL DISTANCE 1600MM, TRAVEL SPEED APPROX. 16M / MIN CHASIS DEMAG TYPE ZBF 63 A 8/2 B004, TRAVEL SPEED 1 M / MIN WITHOUT MANUAL CONTROL UNIT EQUIPMENT: - 25 METERS CRANE RUNWAY (TT-BEAMS) - 25 METERS ELECTRIC RAILS - ANGLE WALL MOUNTING
Vendedor: WMW AG
Año de construcción: usado
Ubicación: Land-wall jib crane
dc-com de mag 2-250 1/1 h4 v6/1.5

-rpm 695 / 2880
-hook path 4.0 m operating voltage: 400
dimensions: 300 x 60 x 50 (d x w x h in cm)
weight: 250 kg

--> free for sale from 01.01.2019 WALL JIB CRANE DC-COM DE MAG 2-250 1/1 H4 V6/1.5 -RPM 695 / 2880 -HOOK PATH 4.0 M OPERATING VOLTAGE: 400 DIMENSIONS: 300 X 60 X 50 (D X W X H IN CM) WEIGHT: 250 KG --> FREE FOR SALE FROM 01.01.2019
Vendedor: RAG Mining Solutions GmbH
Año de construcción: usado
Ubicación: Land-grinding length:600 mm<br/>grinding width:450 mm<br/>workpiece height:450 mm<br/>weight of the machine ca.:4000 kg<br/>table speeds:2-24 m/min<br/>cross travel:460 mm<br/>rapid traverse cross:1200 mm/min<br/>cross feed autom.:1-60 mm/hub<br/>rapid traverse vertical:0,15 m/min<br/>dimensions of grinding wheel:300x50x76 mm<br/>grinding wheel speeds:1400/2800 u/min<br/>grinding spindle drive:5/6 kw<br/>total power requirement:13 kw<br/>table surface area:1100x450 mm<br/><br/>used/overhauled surface grinding machine, make elb, type swbe 6, year of construction 1977.   machine with automatic feed in all 3 axes.  scope of overhaul:  machine completely disassembled, all components thoroughly cleaned and checked for complete functionality.  all guideways newly scraped to new machine geometry. spindle rotation less than 5µ. wear parts replaced, defective components repaired or renewed. re-assembly, complete function test and internal acceptance.  machine in absolutely functional condition. machine repainted. machine in perfect condition, ready for production.  accessories: - electric magnet clamping plate, size 600x400mm, with straight, fine pole pitch. - demagnetizing device installed on the switch cabinet - 1 piece grinding wheel flange - 1 piece tightening / forcing screw - complete coolant system - 1 set of installation/levelling elements - technical documentation in german language  further information can be found in the appendix.  payment:  - 50% at order placement / start of overhaul - 50% before loading of the machine  warranty: 12 months on the geometry and the demonstrably installed new parts. no general statutory warranty.  fig. from brochure for new machines GRINDING LENGTH:600 MM
GRINDING WIDTH:450 MM
WORKPIECE HEIGHT:450 MM
WEIGHT OF THE MACHINE CA.:4000 KG
TABLE SPEEDS:2-24 M/MIN
CROSS TRAVEL:460 MM
RAPID TRAVERSE CROSS:1200 MM/MIN
CROSS FEED AUTOM.:1-60 MM/HUB
RAPID TRAVERSE VERTICAL:0,15 M/MIN
DIMENSIONS OF GRINDING WHEEL:300X50X76 MM
GRINDING WHEEL SPEEDS:1400/2800 U/MIN
GRINDING SPINDLE DRIVE:5/6 KW
TOTAL POWER REQUIREMENT:13 KW
TABLE SURFACE AREA:1100X450 MM

USED/OVERHAULED SURFACE GRINDING MACHINE, MAKE ELB, TYPE SWBE 6, YEAR OF CONSTRUCTION 1977. MACHINE WITH AUTOMATIC FEED IN ALL 3 AXES. SCOPE OF OVERHAUL: MACHINE COMPLETELY DISASSEMBLED, ALL COMPONENTS THOROUGHLY CLEANED AND CHECKED FOR COMPLETE FUNCTIONALITY. ALL GUIDEWAYS NEWLY SCRAPED TO NEW MACHINE GEOMETRY. SPINDLE ROTATION LESS THAN 5µ. WEAR PARTS REPLACED, DEFECTIVE COMPONENTS REPAIRED OR RENEWED. RE-ASSEMBLY, COMPLETE FUNCTION TEST AND INTERNAL ACCEPTANCE. MACHINE IN ABSOLUTELY FUNCTIONAL CONDITION. MACHINE REPAINTED. MACHINE IN PERFECT CONDITION, READY FOR PRODUCTION. ACCESSORIES: - ELECTRIC MAGNET CLAMPING PLATE, SIZE 600X400MM, WITH STRAIGHT, FINE POLE PITCH. - DEMAGNETIZING DEVICE INSTALLED ON THE SWITCH CABINET - 1 PIECE GRINDING WHEEL FLANGE - 1 PIECE TIGHTENING / FORCING SCREW - COMPLETE COOLANT SYSTEM - 1 SET OF INSTALLATION/LEVELLING ELEMENTS - TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE FURTHER INFORMATION CAN BE FOUND IN THE APPENDIX. PAYMENT: - 50% AT ORDER PLACEMENT / START OF OVERHAUL - 50% BEFORE LOADING OF THE MACHINE WARRANTY: 12 MONTHS ON THE GEOMETRY AND THE DEMONSTRABLY INSTALLED NEW PARTS. NO GENERAL STATUTORY WARRANTY. FIG. FROM BROCHURE FOR NEW MACHINES
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pillar jib crane

dimensions: 80 x 400 x 400 (d x w x h in cm)
weight: 3000 kg PILLAR JIB CRANE DIMENSIONS: 80 X 400 X 400 (D X W X H IN CM) WEIGHT: 3000 KG
Vendedor: RAG Mining Solutions GmbH
Año de construcción: usado
Ubicación: Land-linsinger 400/2140 x 25 plate edge milling chamfering beveling machine

sheet metal bevelling machine linsinger (1978) sheet width = from 400 mm to 2140 mm thickness = 25 mm included: roller conveyor and demag loading crane capacity 2.3 tonnes  LINSINGER 400/2140 X 25 PLATE EDGE MILLING CHAMFERING BEVELING MACHINE SHEET METAL BEVELLING MACHINE LINSINGER (1978) SHEET WIDTH = FROM 400 MM TO 2140 MM THICKNESS = 25 MM INCLUDED: ROLLER CONVEYOR AND DEMAG LOADING CRANE CAPACITY 2.3 TONNES
Vendedor: ARTE FERRUM
Año de construcción: usado
Ubicación: Land-â?¢ manufacturer: delta converting equipment ltd, england (mechanical engineering) siemens ag, electrical &amp; control engineering
â?¢ total length: 14,00 m, of which:
o machine:, length: approx. 7.80 m, width: approx. 5.70 m, height: 2.80 m
o table: length: approx 4,80 m, width: 6.00 m, height: 0.50 m
â?¢ unwind stand
㸠max width: 2040 mm
㸠min. web width: 400 mm
㸠max unwinding diameter: 1300 mm
o minimum roll diameter: = core diameter
㸠max rolling weight: 2500 kg
㸠core diameter: 70,76, 150 mm
â?¢ cutting unit
㸠max number of longitudinal: 9 (9.bahn untrimmed)
㸠min. cutting width (narrowest advantage): 7 benefits min. 155 mm, 1 min. 195 mm
omax. benefits number: 8 pieces
obreite trim: 2 x 25 mm
o cutting tolerance: +/-0.1 mm
â?¢ batching system
㸠max width: 2020 mm
㸠max roll diameter: 1250 mm
㸠max rolling weight: 1250 kg per shaft
o aufroll tension: 1.0-8.0 n/cm
㸠core diameter: 70, 76, 150 mm
â?¢ maximum web speed: 1200 m / min
â?¢ electric control: siemens plc s5 135u with technology functions for drive control
â?¢ visualization: siemens op
â?¢ drives: siemens dc drives
â?¢ edge contouring: erhard and leimer
â?¢ cutting system: tidland
â?¢ electr. supply: 400vac, 400a, approximately 220 kw
â?¢ additional equipment: demag - crane system 3500 kg
â?¢ existing technical documentation: mechanical engineering drawings, schematics and plc program documentation, description of the controller, tidland - drawings and technical descriptions, erhard and lakra operating instructions, descriptions of other components
â?¢ year of construction: 1995 &ACIRC;?&CENT; MANUFACTURER: DELTA CONVERTING EQUIPMENT LTD, ENGLAND (MECHANICAL ENGINEERING) SIEMENS AG, ELECTRICAL &AMP; CONTROL ENGINEERING &ACIRC;?&CENT; TOTAL LENGTH: 14,00 M, OF WHICH: O MACHINE:, LENGTH: APPROX. 7.80 M, WIDTH: APPROX. 5.70 M, HEIGHT: 2.80 M O TABLE: LENGTH: APPROX 4,80 M, WIDTH: 6.00 M, HEIGHT: 0.50 M &ACIRC;?&CENT; UNWIND STAND &ATILDE;&CEDIL; MAX WIDTH: 2040 MM &ATILDE;&CEDIL; MIN. WEB WIDTH: 400 MM &ATILDE;&CEDIL; MAX UNWINDING DIAMETER: 1300 MM O MINIMUM ROLL DIAMETER: = CORE DIAMETER &ATILDE;&CEDIL; MAX ROLLING WEIGHT: 2500 KG &ATILDE;&CEDIL; CORE DIAMETER: 70,76, 150 MM &ACIRC;?&CENT; CUTTING UNIT &ATILDE;&CEDIL; MAX NUMBER OF LONGITUDINAL: 9 (9.BAHN UNTRIMMED) &ATILDE;&CEDIL; MIN. CUTTING WIDTH (NARROWEST ADVANTAGE): 7 BENEFITS MIN. 155 MM, 1 MIN. 195 MM OMAX. BENEFITS NUMBER: 8 PIECES OBREITE TRIM: 2 X 25 MM O CUTTING TOLERANCE: +/-0.1 MM &ACIRC;?&CENT; BATCHING SYSTEM &ATILDE;&CEDIL; MAX WIDTH: 2020 MM &ATILDE;&CEDIL; MAX ROLL DIAMETER: 1250 MM &ATILDE;&CEDIL; MAX ROLLING WEIGHT: 1250 KG PER SHAFT O AUFROLL TENSION: 1.0-8.0 N/CM &ATILDE;&CEDIL; CORE DIAMETER: 70, 76, 150 MM &ACIRC;?&CENT; MAXIMUM WEB SPEED: 1200 M / MIN &ACIRC;?&CENT; ELECTRIC CONTROL: SIEMENS PLC S5 135U WITH TECHNOLOGY FUNCTIONS FOR DRIVE CONTROL &ACIRC;?&CENT; VISUALIZATION: SIEMENS OP &ACIRC;?&CENT; DRIVES: SIEMENS DC DRIVES &ACIRC;?&CENT; EDGE CONTOURING: ERHARD AND LEIMER &ACIRC;?&CENT; CUTTING SYSTEM: TIDLAND &ACIRC;?&CENT; ELECTR. SUPPLY: 400VAC, 400A, APPROXIMATELY 220 KW &ACIRC;?&CENT; ADDITIONAL EQUIPMENT: DEMAG - CRANE SYSTEM 3500 KG &ACIRC;?&CENT; EXISTING TECHNICAL DOCUMENTATION: MECHANICAL ENGINEERING DRAWINGS, SCHEMATICS AND PLC PROGRAM DOCUMENTATION, DESCRIPTION OF THE CONTROLLER, TIDLAND - DRAWINGS AND TECHNICAL DESCRIPTIONS, ERHARD AND LAKRA OPERATING INSTRUCTIONS, DESCRIPTIONS OF OTHER COMPONENTS &ACIRC;?&CENT; YEAR OF CONSTRUCTION: 1995
Vendedor: USEDmarket GmbH
Año de construcción: usado
Ubicación: Land-manufacturer/manufacturer: demag
typ/type: ergotech 50-200 year/year: 1993
control/controller: nc 4
clamping force/clamping force: 50 ton
holmabstand/dist.betw.tiebars: 355 mm x 355 mm
disk size/platen size: 530 x 580 mm
wz height/mould hight: min 210 mm opening/opening stroke: 400 mm
plate distance of max/max open daylight: 610 mm
auger/screw size: 25 mm
stroke volume/shot volume: 61 ccm / 54 gram ps
spec. spritzdr / injection pressure: 2400 bar
general / general engine power: 15 kw
heating/heating power: 5.1 kw
dimensions/dimension: 3.65 m x 1.45 m x 1.8 m
weight/weight: 3100 kg
screen text/language: german   MANUFACTURER/MANUFACTURER: DEMAG TYP/TYPE: ERGOTECH 50-200 YEAR/YEAR: 1993 CONTROL/CONTROLLER: NC 4 CLAMPING FORCE/CLAMPING FORCE: 50 TON HOLMABSTAND/DIST.BETW.TIEBARS: 355 MM X 355 MM DISK SIZE/PLATEN SIZE: 530 X 580 MM WZ HEIGHT/MOULD HIGHT: MIN 210 MM OPENING/OPENING STROKE: 400 MM PLATE DISTANCE OF MAX/MAX OPEN DAYLIGHT: 610 MM AUGER/SCREW SIZE: 25 MM STROKE VOLUME/SHOT VOLUME: 61 CCM / 54 GRAM PS SPEC. SPRITZDR / INJECTION PRESSURE: 2400 BAR GENERAL / GENERAL ENGINE POWER: 15 KW HEATING/HEATING POWER: 5.1 KW DIMENSIONS/DIMENSION: 3.65 M X 1.45 M X 1.8 M WEIGHT/WEIGHT: 3100 KG SCREEN TEXT/LANGUAGE: GERMAN
Vendedor: PaGaPlast
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-pillar jib crane demag type kbk<br/>  ident.-no.: 85102644<br/>  year of construction: load capacity of 125 kg<br/>  swivel range 270 °<br/>  throat depth 5000 mm<br/>  height 4000 mm<br/>  height 3500 mm bottom bracket<br/>  -boom profile demag kbk 1 c profile rail<br/>  -trolley for demag kbk 1 c profile rail<br/>  -base l x w x h = 450 x 450 x 25 mm (4 holes Ø 27 mm)<br/>  -original paint orange<br/>  weight 300 kg<br/>  good condition; used PILLAR JIB CRANE DEMAG TYPE KBK
IDENT.-NO.: 85102644
YEAR OF CONSTRUCTION: LOAD CAPACITY OF 125 KG
SWIVEL RANGE 270 °
THROAT DEPTH 5000 MM
HEIGHT 4000 MM
HEIGHT 3500 MM BOTTOM BRACKET
-BOOM PROFILE DEMAG KBK 1 C PROFILE RAIL
-TROLLEY FOR DEMAG KBK 1 C PROFILE RAIL
-BASE L X W X H = 450 X 450 X 25 MM (4 HOLES Ø 27 MM)
-ORIGINAL PAINT ORANGE
WEIGHT 300 KG
GOOD CONDITION; USED
Vendedor: Stange Werkzeugmaschinen GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-used from operational restructuring:<br/>  <br/>  1 x chiron fz 33 cnc vertical machining center with siemens 810 m control and 2 x pallet changing station.<br/>  <br/>  available immediately from stock casting.<br/>  <br/>  year built: 1983 - control siemens 810 m was rebuilt in 2003<br/>  <br/>  scope of delivery:<br/>  1 x chiron fz 33 vertical baz with pallet changing station<br/>  1 x chip conveyor<br/>  1 x hydraulic unit<br/>  1 x demag 120kg hoist crane arm for loading and unloading<br/>  9 tools + 7 tool holder<br/>  operating instructions<br/>  wiring diagrams<br/>  plc<br/>  <br/>  facilities:<br/>  siemens 810 m control<br/>  chip conveyor<br/>  2 x pallet changing station<br/>  24 x tool changer<br/>  cab enclosure<br/>  <br/>  technical data:<br/>  year built: 1983 - control siemens 810 m was rebuilt in 2003<br/>  <br/>  procedures:<br/>  x-axis: 1250 mm<br/>  y-axis: 550 mm<br/>  z-axis: 580 mm<br/>  <br/>  feed range x/y/z axis: 1-4000 mm / min<br/>  rapid traverse x/y/z axis: 12 m / min<br/>  <br/>  table lxw: 1200 x 600 mm equipped with 7 t-slots<br/>  <br/>  distance spindle retainer - table surface: 200-780 mm tool holder: sk40<br/>  insertion force: 5000 n<br/>  <br/>  power: 16,7 kw at 40% ed (14 kw at 100% ed)<br/>  speed range: 20-5000 rpm<br/>  <br/>  operating voltage: 380 v / 50 hz<br/>  steuerspannug: 220 v / 50 hz<br/>  power supply: 35 kva<br/>  <br/>  space lxwxh:<br/>  total weight: vat is 12,000 kg price free shipped from stock casting<br/>  <br/>  changes / errors in the specifications and subject to prior sale USED FROM OPERATIONAL RESTRUCTURING:

1 X CHIRON FZ 33 CNC VERTICAL MACHINING CENTER WITH SIEMENS 810 M CONTROL AND 2 X PALLET CHANGING STATION.

AVAILABLE IMMEDIATELY FROM STOCK CASTING.

YEAR BUILT: 1983 - CONTROL SIEMENS 810 M WAS REBUILT IN 2003

SCOPE OF DELIVERY:
1 X CHIRON FZ 33 VERTICAL BAZ WITH PALLET CHANGING STATION
1 X CHIP CONVEYOR
1 X HYDRAULIC UNIT
1 X DEMAG 120KG HOIST CRANE ARM FOR LOADING AND UNLOADING
9 TOOLS + 7 TOOL HOLDER
OPERATING INSTRUCTIONS
WIRING DIAGRAMS
PLC

FACILITIES:
SIEMENS 810 M CONTROL
CHIP CONVEYOR
2 X PALLET CHANGING STATION
24 X TOOL CHANGER
CAB ENCLOSURE

TECHNICAL DATA:
YEAR BUILT: 1983 - CONTROL SIEMENS 810 M WAS REBUILT IN 2003

PROCEDURES:
X-AXIS: 1250 MM
Y-AXIS: 550 MM
Z-AXIS: 580 MM

FEED RANGE X/Y/Z AXIS: 1-4000 MM / MIN
RAPID TRAVERSE X/Y/Z AXIS: 12 M / MIN

TABLE LXW: 1200 X 600 MM EQUIPPED WITH 7 T-SLOTS

DISTANCE SPINDLE RETAINER - TABLE SURFACE: 200-780 MM TOOL HOLDER: SK40
INSERTION FORCE: 5000 N

POWER: 16,7 KW AT 40% ED (14 KW AT 100% ED)
SPEED RANGE: 20-5000 RPM

OPERATING VOLTAGE: 380 V / 50 HZ
STEUERSPANNUG: 220 V / 50 HZ
POWER SUPPLY: 35 KVA

SPACE LXWXH:
TOTAL WEIGHT: VAT IS 12,000 KG PRICE FREE SHIPPED FROM STOCK CASTING

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE
Vendedor: Weigel – Consulting
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-we offer:<br/>  <br/>  4 temperature control device wittmann 1xtempro primus-c, 3 x digicolor x-2003<br/>  <br/>  info from the net:<br/>  single circuit temperature control unit (90 ° c). indirect cooling with same heat exchanger as well as same submersible pump with high capacity as at the tempro primus-c; 90. by default with leak stop operation and switch to the suction during die changes.<br/>  <br/>  the device was acquired in the context of the acquisition of an insolvent company. it is not in use and stored<br/>  1.<br/>  manufacturer: wittmann gmbh, nuremberg<br/>  series: tempro-primus/c; 90<br/>  type: t4a3a1s00_01_00<br/>  year of construction: 100/2008<br/>  no. tp00000190<br/>  connection: 3 x 415v 11a 7kw<br/>  dimensions: h = approx. 670 mm, t = 500 mm, b = 260 mm<br/>  <br/>  2. (example)<br/>  manufacturer: digicoplor / thermonorm bielefeld<br/>  type: x-2000<br/>  year of construction: 1998<br/>  no. 90243<br/>  connection: 3 x 230/400v 11a interf. 7kw<br/>  : pump bacon, 230/400v 50 hz, 750 w, 3.9/2.3 a ip 54<br/>  qmax.: 40l / min<br/>  hmax.; 58mfls<br/>  dimensions: approx. 650 mm h =, t = 570 mm, b = 235 mm<br/>  weight: approx. 40 kg<br/>  <br/>  condition: used unchecked<br/>  <br/>  the plant is located currently at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer for the transportation of the specified site of the purchased machine responsible.<br/>  <br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -spritzgussmaschibe angel\'s 2550 h 500w 600 duo 2 f and more<br/>  -air circulation dryer arburg thermolift 100 380v 5, 35 kw<br/>  -chiller of air cooled liquid chillers cli<br/> [...] WE OFFER:

4 TEMPERATURE CONTROL DEVICE WITTMANN 1XTEMPRO PRIMUS-C, 3 X DIGICOLOR X-2003

INFO FROM THE NET:
SINGLE CIRCUIT TEMPERATURE CONTROL UNIT (90 ° C). INDIRECT COOLING WITH SAME HEAT EXCHANGER AS WELL AS SAME SUBMERSIBLE PUMP WITH HIGH CAPACITY AS AT THE TEMPRO PRIMUS-C; 90. BY DEFAULT WITH LEAK STOP OPERATION AND SWITCH TO THE SUCTION DURING DIE CHANGES.

THE DEVICE WAS ACQUIRED IN THE CONTEXT OF THE ACQUISITION OF AN INSOLVENT COMPANY. IT IS NOT IN USE AND STORED
1.
MANUFACTURER: WITTMANN GMBH, NUREMBERG
SERIES: TEMPRO-PRIMUS/C; 90
TYPE: T4A3A1S00_01_00
YEAR OF CONSTRUCTION: 100/2008
NO. TP00000190
CONNECTION: 3 X 415V 11A 7KW
DIMENSIONS: H = APPROX. 670 MM, T = 500 MM, B = 260 MM

2. (EXAMPLE)
MANUFACTURER: DIGICOPLOR / THERMONORM BIELEFELD
TYPE: X-2000
YEAR OF CONSTRUCTION: 1998
NO. 90243
CONNECTION: 3 X 230/400V 11A INTERF. 7KW
: PUMP BACON, 230/400V 50 HZ, 750 W, 3.9/2.3 A IP 54
QMAX.: 40L / MIN
HMAX.; 58MFLS
DIMENSIONS: APPROX. 650 MM H =, T = 570 MM, B = 235 MM
WEIGHT: APPROX. 40 KG

CONDITION: USED UNCHECKED

THE PLANT IS LOCATED CURRENTLY AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE RESPONSIBLE.

-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-SPRITZGUSSMASCHIBE ANGEL\'S 2550 H 500W 600 DUO 2 F AND MORE
-AIR CIRCULATION DRYER ARBURG THERMOLIFT 100 380V 5, 35 KW
-CHILLER OF AIR COOLED LIQUID CHILLERS CLI
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-injection molding machine demag d 175 nc 3
year of construction: 1988
locking force in kn: 1750
maximum load capacity in kg: 2000
light distance: 550-550
min. height: 200
maximum height: 400
centering d page / a - page: 160 / 160
screw diameter: 60
injection pressure max cash: 1360
injection weight gr/ps: 480
opening stroke: 550
core pull control. 2 x INJECTION MOLDING MACHINE DEMAG D 175 NC 3 YEAR OF CONSTRUCTION: 1988 LOCKING FORCE IN KN: 1750 MAXIMUM LOAD CAPACITY IN KG: 2000 LIGHT DISTANCE: 550-550 MIN. HEIGHT: 200 MAXIMUM HEIGHT: 400 CENTERING D PAGE / A - PAGE: 160 / 160 SCREW DIAMETER: 60 INJECTION PRESSURE MAX CASH: 1360 INJECTION WEIGHT GR/PS: 480 OPENING STROKE: 550 CORE PULL CONTROL. 2 X
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 590 €
Ubicación: Land-we offer:<br/>  <br/>  electric motor flange motor fom 200 18.5 kw 380/420v / 660-720v shaft 55 mm<br/>  bolt circle diameter 350 mm<br/>  <br/>  the electric motor comes from a wallpaper factory spare parts stock. he is in stock. he is dusty externally due to storage. .<br/>  <br/>  technical data<br/>  electric motor type: fom 200 a 6<br/>  manufacturer:??? motors gmbh...<br/>  no. 04080401<br/>  year of manufacture:????<br/>  voltage: 380/420v / 660-720v 50/60 hz<br/>  drtehzahl: 970 rpm at 50 hz<br/>  power: 18.5 kw s1 at 50 hz<br/>  cos phi: 0.81<br/>  power: 38.6 / 21.1 a<br/>  ip 55<br/>  shaft diameter: 55 mm<br/>  bolt circle diameter: 350 mm<br/>  <br/>  weight: 225 kg<br/>  <br/>  more assets at ms written out as follows in the offer:<br/>  <br/>  transformer fig. 3 ~ 20(15) kv / 400 v 630 kva year 2014<br/>  -driving motor sew k46 dt71d 4bmg 3 ~ 380v 0.37 kw 117 u/min<br/>  -centrifugal pump Ørsta hydraulic 6.3 m ³/h10 bar 5,5 kw on cast frame<br/>  -grundfos magna 65-60 f 340 mm energiesparpumpe / circulation pump with shut-off valve<br/>  -grundfos ups 65-120/2f 340 mm pump ~ 3 400v 850-1150w with angle seat valve 65pn6<br/>  -painting system venjakob lwh 9 bj. 1990 including extraction and conveying systems<br/>  -3 horde truck arm car lacquer drying trolleys with 4 wheels<br/>  -swap storage container approx. 7.5 x 2.5 x 2.5 m 16 d<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -chiller of air cooled chillers climaserv gfc f 260 st 260 kw refrigeration capacity<br/>  -injection molding machine demag ergotech 330-2300 compackt control nc4 with handling<br/>  -injection moulding machine angel es2550h 500w<br/> [...] WE OFFER:

ELECTRIC MOTOR FLANGE MOTOR FOM 200 18.5 KW 380/420V / 660-720V SHAFT 55 MM
BOLT CIRCLE DIAMETER 350 MM

THE ELECTRIC MOTOR COMES FROM A WALLPAPER FACTORY SPARE PARTS STOCK. HE IS IN STOCK. HE IS DUSTY EXTERNALLY DUE TO STORAGE. .

TECHNICAL DATA
ELECTRIC MOTOR TYPE: FOM 200 A 6
MANUFACTURER:??? MOTORS GMBH...
NO. 04080401
YEAR OF MANUFACTURE:????
VOLTAGE: 380/420V / 660-720V 50/60 HZ
DRTEHZAHL: 970 RPM AT 50 HZ
POWER: 18.5 KW S1 AT 50 HZ
COS PHI: 0.81
POWER: 38.6 / 21.1 A
IP 55
SHAFT DIAMETER: 55 MM
BOLT CIRCLE DIAMETER: 350 MM

WEIGHT: 225 KG

MORE ASSETS AT MS WRITTEN OUT AS FOLLOWS IN THE OFFER:

TRANSFORMER FIG. 3 ~ 20(15) KV / 400 V 630 KVA YEAR 2014
-DRIVING MOTOR SEW K46 DT71D 4BMG 3 ~ 380V 0.37 KW 117 U/MIN
-CENTRIFUGAL PUMP ØRSTA HYDRAULIC 6.3 M ³/H10 BAR 5,5 KW ON CAST FRAME
-GRUNDFOS MAGNA 65-60 F 340 MM ENERGIESPARPUMPE / CIRCULATION PUMP WITH SHUT-OFF VALVE
-GRUNDFOS UPS 65-120/2F 340 MM PUMP ~ 3 400V 850-1150W WITH ANGLE SEAT VALVE 65PN6
-PAINTING SYSTEM VENJAKOB LWH 9 BJ. 1990 INCLUDING EXTRACTION AND CONVEYING SYSTEMS
-3 HORDE TRUCK ARM CAR LACQUER DRYING TROLLEYS WITH 4 WHEELS
-SWAP STORAGE CONTAINER APPROX. 7.5 X 2.5 X 2.5 M 16 D
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-CHILLER OF AIR COOLED CHILLERS CLIMASERV GFC F 260 ST 260 KW REFRIGERATION CAPACITY
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT CONTROL NC4 WITH HANDLING
-INJECTION MOULDING MACHINE ANGEL ES2550H 500W
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 2.000 €
Ubicación: packaging: see transport box photo

condition: new, in the original box, as-is, ready for use, see photos

the parts is currently still at the location of the customers in saxony anhalt.der are sold ex works exw.
the buyer is responsible for the transportation of the specified site of the purchased machine.

next vermoegeswerte in the range as follows:

-injection moulding machine arburg allrounder 305-210-700 + angußp. klocke
-injection moulding machine krauss maffei km 80-390 c2 year 2000 + handl...
-injection molding machine demag ergotech 330-2300 compackt handling
-injection moulding machine arburg allrounder 320-750-210 + robot geku 250
-injection moulding machine arburg allrounder 320-750-210-210 2 k handling
-injection moulding machine arburg allrounder 221-55-250 + r.gif" alt="Land-we offer:
cylinder & screw d 110 mm injection molding machine windsor 20000 kn

the parts were supplied in a previous project which came not to run.

be sure to visit!

technical data
manufacturer: windsor

cylinder:
for clamping force: 20000 kn or more
length: 4010 mm
diameter outside: approx. 280 mm
diameter internal: approx. 110 mm for appropriate mixing screw
number of the packaging: 62134-2; 80193; 063259
: weight 2013
packaging: see transport box photo

screw mixing screw more than one zone
screw diameter: 110 mm
length: 4000 mm
nr of the packaging: 62136
weight: 805 lbs 385 kg
weight of packaging: 5.25 x 162 \"
packaging: see transport box photo

condition: new, in the original box, as-is, ready for use, see photos

the parts is currently still at the location of the customers in saxony anhalt.der are sold ex works exw.
the buyer is responsible for the transportation of the specified site of the purchased machine.

next vermoegeswerte in the range as follows:

-injection moulding machine arburg allrounder 305-210-700 + angußp. klocke
-injection moulding machine krauss maffei km 80-390 c2 year 2000 + handl...
-injection molding machine demag ergotech 330-2300 compackt handling
-injection moulding machine arburg allrounder 320-750-210 + robot geku 250
-injection moulding machine arburg allrounder 320-750-210-210 2 k handling
-injection moulding machine arburg allrounder 221-55-250 + r" style="height: 18px;"> WE OFFER:
CYLINDER & SCREW D 110 MM INJECTION MOLDING MACHINE WINDSOR 20000 KN

THE PARTS WERE SUPPLIED IN A PREVIOUS PROJECT WHICH CAME NOT TO RUN.

BE SURE TO VISIT!

TECHNICAL DATA
MANUFACTURER: WINDSOR

CYLINDER:
FOR CLAMPING FORCE: 20000 KN OR MORE
LENGTH: 4010 MM
DIAMETER OUTSIDE: APPROX. 280 MM
DIAMETER INTERNAL: APPROX. 110 MM FOR APPROPRIATE MIXING SCREW
NUMBER OF THE PACKAGING: 62134-2; 80193; 063259
: WEIGHT 2013
PACKAGING: SEE TRANSPORT BOX PHOTO

SCREW MIXING SCREW MORE THAN ONE ZONE
SCREW DIAMETER: 110 MM
LENGTH: 4000 MM
NR OF THE PACKAGING: 62136
WEIGHT: 805 LBS 385 KG
WEIGHT OF PACKAGING: 5.25 X 162 \"
PACKAGING: SEE TRANSPORT BOX PHOTO

CONDITION: NEW, IN THE ORIGINAL BOX, AS-IS, READY FOR USE, SEE PHOTOS

THE PARTS IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT.DER ARE SOLD EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

NEXT VERMOEGESWERTE IN THE RANGE AS FOLLOWS:

-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 80-390 C2 YEAR 2000 + HANDL...
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 320-750-210 + ROBOT GEKU 250
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 320-750-210-210 2 K HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + R
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Ubicación: Land-hersteller:                           demag<br/>  typ:                                       ergotec viva 80-400<br/>  baujahr:                                2000<br/>  schließkraft:                         80 tonnen<br/>  holmabstand:                      420 x 420 <br/>  schneckendurchmesser:   35 mm<br/>  spritzteilgewicht in ps:        181 g / ps<br/>  <br/>  ausstattung:<br/>  1 x kernzug<br/>  schnittstelle handling<br/>  neue hydraulikschläuche<br/>  neue hydraulikschläuche HERSTELLER: DEMAG
TYP: ERGOTEC VIVA 80-400
BAUJAHR: 2000
SCHLIEßKRAFT: 80 TONNEN
HOLMABSTAND: 420 X 420
SCHNECKENDURCHMESSER: 35 MM
SPRITZTEILGEWICHT IN PS: 181 G / PS

AUSSTATTUNG:
1 X KERNZUG
SCHNITTSTELLE HANDLING
NEUE HYDRAULIKSCHLäUCHE
NEUE HYDRAULIKSCHLäUCHE
Vendedor: SWISSBID IBS MACHINES AG
Año de construcción: usado
Precio: 1.000 €
Ubicación: -conveyor belt conveyors salama 1000/400 l mobile 230v 120w
-injection molding machine demag ergotech 330-2300.gif" alt="Land-we offer:

conveyor belt conveyors 1250 x 370 mm with drehzahlsteueung + hot-air blower in height and angle adjustable, fahrlbar on 4 wheels, functional.

manufacturer: unknown
type:?
no.?
year of construction:?
band dimensions: 370 x 1250
mass installation: 650 x 1350
height: 10 cm
angle: adjustable
mobile: yes on 4 wheels
connection: 230v 50 hz
engine: rf 0.12/4-7r
connection: 380/220v 0.12 kw

speed control through:
frequency converter: moeller df4-120-037
input: 1/n/pe ac 230v 5a 50 hz
output: 3/ac 0-230v 2.6 a 0.37 kw

hot air blower karl leiter ch
type: hotwind s 901
connection: 220v 3400 / motor 50w
2 mbar 550 l/min

weight approx. 200 kg

state. used see photos, ready to be used, as is,

next conveyor belts on sale.

he promotes anhalt is currently still at the location of the customers in saxony. the sale is carried out ex works exw.
the buyer is responsible for the transportation of the specified site of the purchased machine.

furthermore we offer:

-conveyor belt conveyors mtf blf 500x37x100cm clocked run/pause.
-conveyor belt conveyors mtf nl ie 010 255x30x100cm clocked run/pause...
-conveyor belt conveyors salama 1000/400 l mobile 230v 120w
-smoking area "smokecorner" then sc 600 ul basic for 4 persons
-conveyor belt conveyors salama 1000/400 l mobile 230v 120w
-injection molding machine demag ergotech 330-2300" style="height: 18px;"> WE OFFER:

CONVEYOR BELT CONVEYORS 1250 X 370 MM WITH DREHZAHLSTEUEUNG + HOT-AIR BLOWER IN HEIGHT AND ANGLE ADJUSTABLE, FAHRLBAR ON 4 WHEELS, FUNCTIONAL.

MANUFACTURER: UNKNOWN
TYPE:?
NO.?
YEAR OF CONSTRUCTION:?
BAND DIMENSIONS: 370 X 1250
MASS INSTALLATION: 650 X 1350
HEIGHT: 10 CM
ANGLE: ADJUSTABLE
MOBILE: YES ON 4 WHEELS
CONNECTION: 230V 50 HZ
ENGINE: RF 0.12/4-7R
CONNECTION: 380/220V 0.12 KW

SPEED CONTROL THROUGH:
FREQUENCY CONVERTER: MOELLER DF4-120-037
INPUT: 1/N/PE AC 230V 5A 50 HZ
OUTPUT: 3/AC 0-230V 2.6 A 0.37 KW

HOT AIR BLOWER KARL LEITER CH
TYPE: HOTWIND S 901
CONNECTION: 220V 3400 / MOTOR 50W
2 MBAR 550 L/MIN

WEIGHT APPROX. 200 KG

STATE. USED SEE PHOTOS, READY TO BE USED, AS IS,

NEXT CONVEYOR BELTS ON SALE.

HE PROMOTES ANHALT IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

FURTHERMORE WE OFFER:

-CONVEYOR BELT CONVEYORS MTF BLF 500X37X100CM CLOCKED RUN/PAUSE.
-CONVEYOR BELT CONVEYORS MTF NL IE 010 255X30X100CM CLOCKED RUN/PAUSE...
-CONVEYOR BELT CONVEYORS SALAMA 1000/400 L MOBILE 230V 120W
-SMOKING AREA "SMOKECORNER" THEN SC 600 UL BASIC FOR 4 PERSONS
-CONVEYOR BELT CONVEYORS SALAMA 1000/400 L MOBILE 230V 120W
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 2.500 €
Ubicación: packaging: see transport box photo

condition: new, in the original box, as-is, ready for use, see photos

the parts is currently still at the location of the customers in saxony anhalt.der are sold ex works exw.
the buyer is responsible for the transportation of the specified site of the purchased machine.

next vermoegeswerte in the range as follows:

-injection moulding machine arburg allrounder 305-210-700 + angußp. klocke
-injection moulding machine krauss maffei km 80-390 c2 year 2000 + handl...
-injection molding machine demag ergotech 330-2300 compackt handling
-injection moulding machine arburg allrounder 320-750-210 + robot geku 250
-injection moulding machine arburg allrounder 320-750-210-210 2 k handling
-injection moulding machine arburg allrounder 221-55-250 + r.gif" alt="Land-we offer:
cylinder & screw d 110 mm injection molding machine windsor 20000 kn

the parts were supplied in a previous project which came not to run.

be sure to visit!

technical data
manufacturer: windsor

cylinder:
for clamping force: 20000 kn or more
length: 4010 mm
diameter outside: approx. 280 mm
diameter internal: approx. 110 mm for appropriate mixing screw
number of the packaging: 62134-2; 80193; 063259
: weight 2013
packaging: see transport box photo

screw mixing screw more than one zone
screw diameter: 110 mm
length: 4000 mm
nr of the packaging: 62136
weight: 805 lbs 385 kg
weight of packaging: 5.25 x 162 \"
packaging: see transport box photo

condition: new, in the original box, as-is, ready for use, see photos

the parts is currently still at the location of the customers in saxony anhalt.der are sold ex works exw.
the buyer is responsible for the transportation of the specified site of the purchased machine.

next vermoegeswerte in the range as follows:

-injection moulding machine arburg allrounder 305-210-700 + angußp. klocke
-injection moulding machine krauss maffei km 80-390 c2 year 2000 + handl...
-injection molding machine demag ergotech 330-2300 compackt handling
-injection moulding machine arburg allrounder 320-750-210 + robot geku 250
-injection moulding machine arburg allrounder 320-750-210-210 2 k handling
-injection moulding machine arburg allrounder 221-55-250 + r" style="height: 18px;"> WE OFFER:
CYLINDER & SCREW D 110 MM INJECTION MOLDING MACHINE WINDSOR 20000 KN

THE PARTS WERE SUPPLIED IN A PREVIOUS PROJECT WHICH CAME NOT TO RUN.

BE SURE TO VISIT!

TECHNICAL DATA
MANUFACTURER: WINDSOR

CYLINDER:
FOR CLAMPING FORCE: 20000 KN OR MORE
LENGTH: 4010 MM
DIAMETER OUTSIDE: APPROX. 280 MM
DIAMETER INTERNAL: APPROX. 110 MM FOR APPROPRIATE MIXING SCREW
NUMBER OF THE PACKAGING: 62134-2; 80193; 063259
: WEIGHT 2013
PACKAGING: SEE TRANSPORT BOX PHOTO

SCREW MIXING SCREW MORE THAN ONE ZONE
SCREW DIAMETER: 110 MM
LENGTH: 4000 MM
NR OF THE PACKAGING: 62136
WEIGHT: 805 LBS 385 KG
WEIGHT OF PACKAGING: 5.25 X 162 \"
PACKAGING: SEE TRANSPORT BOX PHOTO

CONDITION: NEW, IN THE ORIGINAL BOX, AS-IS, READY FOR USE, SEE PHOTOS

THE PARTS IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT.DER ARE SOLD EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

NEXT VERMOEGESWERTE IN THE RANGE AS FOLLOWS:

-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 305-210-700 + ANGUßP. KLOCKE
-INJECTION MOULDING MACHINE KRAUSS MAFFEI KM 80-390 C2 YEAR 2000 + HANDL...
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 320-750-210 + ROBOT GEKU 250
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 320-750-210-210 2 K HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + R
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-we offer:<br/>  <br/>  swap storage container approx. 7.5 x 2.5 x 2.5 m 16 d<br/>  <br/>  manufacturer: unknown<br/>  no. 0550198<br/>  year of construction: 1995<br/>  max. total weight: 16000 kg<br/>  weight: 2100 kg<br/>  <br/>  state. used, as is, see photo<br/>  <br/>  the swap is currently still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the dismantling, transportation of the specified site of the purchased machine.<br/>  <br/>  furthermore we offer:<br/>  <br/>  furthermore we offer:<br/>  -3 x rack trolleys arm car lacquer drying trolleys with 4 wheels<br/>  -belt conveyor belt conveyor 1250 x 370 mm of drehzahlsteueung with hot air blower hotwind 3400 w<br/>  -painting system venjakob lwh 9 bj. 1990 including extraction and conveying systems<br/>  -pallet stretch-wrapper around rotoplat jolly 275 x 270 x 172 cm for pallets of 1 x 1, 2 x 2, 4 m<br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  injection moulding machines engel's 1300 150 control cc 90<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -injection moulding machine arburg allrounder 320-750-210 + robot geku sr 250 s<br/>  -drip range sump with grating 200 l for 2 x 200.<br/>  -horizontal grinder band cs411 200x75cm x 40 380v 2.2 kw...<br/>  -centrifugal pump Ørsta hydraulic 6.3 m ³/h10 bar 5,5 kw on cast frame<br/>  -electric actuator philps 220v 50 hz 75va 10 kpm 90° 60 s<br/>  -geared motor kod with timing belt pulleys + brake 0.25 WE OFFER:

SWAP STORAGE CONTAINER APPROX. 7.5 X 2.5 X 2.5 M 16 D

MANUFACTURER: UNKNOWN
NO. 0550198
YEAR OF CONSTRUCTION: 1995
MAX. TOTAL WEIGHT: 16000 KG
WEIGHT: 2100 KG

STATE. USED, AS IS, SEE PHOTO

THE SWAP IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE DISMANTLING, TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

FURTHERMORE WE OFFER:

FURTHERMORE WE OFFER:
-3 X RACK TROLLEYS ARM CAR LACQUER DRYING TROLLEYS WITH 4 WHEELS
-BELT CONVEYOR BELT CONVEYOR 1250 X 370 MM OF DREHZAHLSTEUEUNG WITH HOT AIR BLOWER HOTWIND 3400 W
-PAINTING SYSTEM VENJAKOB LWH 9 BJ. 1990 INCLUDING EXTRACTION AND CONVEYING SYSTEMS
-PALLET STRETCH-WRAPPER AROUND ROTOPLAT JOLLY 275 X 270 X 172 CM FOR PALLETS OF 1 X 1, 2 X 2, 4 M
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
INJECTION MOULDING MACHINES ENGEL'S 1300 150 CONTROL CC 90
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 320-750-210 + ROBOT GEKU SR 250 S
-DRIP RANGE SUMP WITH GRATING 200 L FOR 2 X 200.
-HORIZONTAL GRINDER BAND CS411 200X75CM X 40 380V 2.2 KW...
-CENTRIFUGAL PUMP ØRSTA HYDRAULIC 6.3 M ³/H10 BAR 5,5 KW ON CAST FRAME
-ELECTRIC ACTUATOR PHILPS 220V 50 HZ 75VA 10 KPM 90° 60 S
-GEARED MOTOR KOD WITH TIMING BELT PULLEYS + BRAKE 0.25
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 690 €
Ubicación: Land-we offer:<br/>  <br/>  convection dryers arburg thermolift 100 380 v 5.35 kw<br/>  <br/>  the air dryer is operational. you are übernmommen in the context of a wake-up acquisition. due to a geschäfsumstelllung and or new acquisition for our clients they needed more teacher spreading.<br/>  <br/>  manufacturer: arburg<br/>  type: thermolit 100<br/>  number: 202187 and others<br/>  year of construction: 1979<br/>  total weight approx. 200 kg<br/>  connection:<br/>  voltage: 380 3 ~.<br/>  heating: 4,5 kw<br/>  blower: 0,85 kw<br/>  <br/>  state. well, ready for operation, see photos<br/>  <br/>  the dryer is still at the location of the customers in saxony anhalt. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  5 further identical present.<br/>  <br/>  furthermore we offer:<br/>  -belt conveyor belt conveyor speed control with hot air blower hotwind 3400 w 1250 x 370 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft 26, 65 m³ as hazardous material containers ex + ventilation<br/>  -centrifuge szb0 1000c 960 1 / min 6 loadings/h<br/>  -transformer fig. 3 ~ 20(15) kv / 400 v 630 kva year 2014<br/>  -control transformer transformer est 1,6 1600/3200 va 380/220v 7,27a<br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -fuel<br/> [...] WE OFFER:

CONVECTION DRYERS ARBURG THERMOLIFT 100 380 V 5.35 KW

THE AIR DRYER IS OPERATIONAL. YOU ARE üBERNMOMMEN IN THE CONTEXT OF A WAKE-UP ACQUISITION. DUE TO A GESCHäFSUMSTELLLUNG AND OR NEW ACQUISITION FOR OUR CLIENTS THEY NEEDED MORE TEACHER SPREADING.

MANUFACTURER: ARBURG
TYPE: THERMOLIT 100
NUMBER: 202187 AND OTHERS
YEAR OF CONSTRUCTION: 1979
TOTAL WEIGHT APPROX. 200 KG
CONNECTION:
VOLTAGE: 380 3 ~.
HEATING: 4,5 KW
BLOWER: 0,85 KW

STATE. WELL, READY FOR OPERATION, SEE PHOTOS

THE DRYER IS STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY ANHALT. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

5 FURTHER IDENTICAL PRESENT.

FURTHERMORE WE OFFER:
-BELT CONVEYOR BELT CONVEYOR SPEED CONTROL WITH HOT AIR BLOWER HOTWIND 3400 W 1250 X 370 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT 26, 65 M³ AS HAZARDOUS MATERIAL CONTAINERS EX + VENTILATION
-CENTRIFUGE SZB0 1000C 960 1 / MIN 6 LOADINGS/H
-TRANSFORMER FIG. 3 ~ 20(15) KV / 400 V 630 KVA YEAR 2014
-CONTROL TRANSFORMER TRANSFORMER EST 1,6 1600/3200 VA 380/220V 7,27A
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-FUEL
[...]
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 120 €
Ubicación: Land-we offer<br/>  <br/>  workshop trolleys garant steel with wheels and drawers without content<br/>  display is added.<br/>  <br/>  tool trolleys<br/>  garant 918100<br/>  wxdxh: 65/73 x 45/55 x 93 cm<br/>  roller bearing drawers, 85% score, pull-out stop<br/>  height drawer dimensions inside from above wxd 50 x 40 cm - 55/55/115/115/115/175 mm<br/>  roles are used (see photos), locking<br/>  weight: 58 kg<br/>  <br/>  a total of 8 cars of and other manufacturers available.<br/>  tool can be purchased separately.<br/>  <br/>  the cars are currently still at the site of the seller.<br/>  <br/>  condition: used, good s.fotos<br/>  <br/>  furthermore we offer:<br/>  <br/>  -ring spanner set stahlwille/garant 41.36 34, 32, 30, 27 mm<br/>  -bus key set pb swiss made 210 / 19, 17, 14 and 12, and amf 12 mm<br/>  -cylinder trolley for two large bottles with safety chain<br/>  -150 x u steel profile (3 packets) 15x30x15x2, 5 x ca. 3000 mm...<br/>  -industry standing wide 128 x 61 x 95 cm<br/>  -electric heater wilms el 15 380v ~ 15 kw 900 m³/h<br/>  -air conditioning heating or cooling register wolf kg 100 8200 m ³/h 15 kw<br/>  -geyer house connection box type: kh00 - a 3x500v 20-50 a<br/>  -sea container 20 ft 26, 65 m³ as hazardous material containers ex + ventilation<br/>  -centrifuge szb0 1000c 960 1 / min 6 loadings/h<br/>  -transformer fig. 3 ~ 20(15) kv / 400 v 630 kva year 2014<br/>  -control transformer transformer est 1,6 1600/3200 va 380/220v 7,27a<br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -spritzgussmaschibe eng WE OFFER

WORKSHOP TROLLEYS GARANT STEEL WITH WHEELS AND DRAWERS WITHOUT CONTENT
DISPLAY IS ADDED.

TOOL TROLLEYS
GARANT 918100
WXDXH: 65/73 X 45/55 X 93 CM
ROLLER BEARING DRAWERS, 85% SCORE, PULL-OUT STOP
HEIGHT DRAWER DIMENSIONS INSIDE FROM ABOVE WXD 50 X 40 CM - 55/55/115/115/115/175 MM
ROLES ARE USED (SEE PHOTOS), LOCKING
WEIGHT: 58 KG

A TOTAL OF 8 CARS OF AND OTHER MANUFACTURERS AVAILABLE.
TOOL CAN BE PURCHASED SEPARATELY.

THE CARS ARE CURRENTLY STILL AT THE SITE OF THE SELLER.

CONDITION: USED, GOOD S.FOTOS

FURTHERMORE WE OFFER:

-RING SPANNER SET STAHLWILLE/GARANT 41.36 34, 32, 30, 27 MM
-BUS KEY SET PB SWISS MADE 210 / 19, 17, 14 AND 12, AND AMF 12 MM
-CYLINDER TROLLEY FOR TWO LARGE BOTTLES WITH SAFETY CHAIN
-150 X U STEEL PROFILE (3 PACKETS) 15X30X15X2, 5 X CA. 3000 MM...
-INDUSTRY STANDING WIDE 128 X 61 X 95 CM
-ELECTRIC HEATER WILMS EL 15 380V ~ 15 KW 900 M³/H
-AIR CONDITIONING HEATING OR COOLING REGISTER WOLF KG 100 8200 M ³/H 15 KW
-GEYER HOUSE CONNECTION BOX TYPE: KH00 - A 3X500V 20-50 A
-SEA CONTAINER 20 FT 26, 65 M³ AS HAZARDOUS MATERIAL CONTAINERS EX + VENTILATION
-CENTRIFUGE SZB0 1000C 960 1 / MIN 6 LOADINGS/H
-TRANSFORMER FIG. 3 ~ 20(15) KV / 400 V 630 KVA YEAR 2014
-CONTROL TRANSFORMER TRANSFORMER EST 1,6 1600/3200 VA 380/220V 7,27A
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-SPRITZGUSSMASCHIBE ENG
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Año de construcción: usado
Precio: 900 €
Ubicación: Land-we offer:<br/>  <br/>  conveyor belt conveyors the band 300x50x115cm in height and angle adjustable, fahrlbar on 2 stands with 2 castors, support in the middle band is operational.<br/>  <br/>  manufacturer: the band<br/>  type: 300 x 150 cm<br/>  no. 9508-0379/02<br/>  year of construction:?<br/>  band dimensions: 300 x 50 cm<br/>  mass system: 300 x 70 cm<br/>  height: 115 cm<br/>  angle: adjustable<br/>  mobile: yes on 4 wheels<br/>  connection: 380/220v 50 hz<br/>  gear motor: rf 0.25/4-7 0.25 kw 1410 u ip 44<br/>  control cabinet with contactor and moterschutz moeller<br/>  <br/>  weight approx. 200 kg<br/>  <br/>  state. used see photos, ready to be used, as is,<br/>  <br/>  next conveyor belts on sale.<br/>  <br/>  he promotes anhalt is currently still at the location of the customers in saxony. the sale is carried out ex works exw.<br/>  the buyer is responsible for the transportation of the specified site of the purchased machine.<br/>  <br/>  furthermore we offer:<br/>  -belt conveyor belt conveyor 1250 x 370 mm of drehzahlsteueung with hot air blower hotwind 3400 w<br/>  -conveyor belt conveyors mtf nl ie 010 255x30x100cm clocked...<br/>  -conveyor belt conveyors salama 1000/400 l mobile 230v 120w<br/>  -injection molding machine demag ergotech 330-2300 compackt handling<br/>  -injection moulding machine arburg allrounder 221-55-250 + robot klocke<br/>  -spritzgussmaschibe angel's 2550 h 500w 600 duo 2 f<br/>  -conveyor belt conveyors mtf gl ie 010 200x26x110cm clocked...<br/>  -pallet stretch-wrapper around rotoplat jolly 275 x 270 x 172 cm for pallets 1 x. WE OFFER:

CONVEYOR BELT CONVEYORS THE BAND 300X50X115CM IN HEIGHT AND ANGLE ADJUSTABLE, FAHRLBAR ON 2 STANDS WITH 2 CASTORS, SUPPORT IN THE MIDDLE BAND IS OPERATIONAL.

MANUFACTURER: THE BAND
TYPE: 300 X 150 CM
NO. 9508-0379/02
YEAR OF CONSTRUCTION:?
BAND DIMENSIONS: 300 X 50 CM
MASS SYSTEM: 300 X 70 CM
HEIGHT: 115 CM
ANGLE: ADJUSTABLE
MOBILE: YES ON 4 WHEELS
CONNECTION: 380/220V 50 HZ
GEAR MOTOR: RF 0.25/4-7 0.25 KW 1410 U IP 44
CONTROL CABINET WITH CONTACTOR AND MOTERSCHUTZ MOELLER

WEIGHT APPROX. 200 KG

STATE. USED SEE PHOTOS, READY TO BE USED, AS IS,

NEXT CONVEYOR BELTS ON SALE.

HE PROMOTES ANHALT IS CURRENTLY STILL AT THE LOCATION OF THE CUSTOMERS IN SAXONY. THE SALE IS CARRIED OUT EX WORKS EXW.
THE BUYER IS RESPONSIBLE FOR THE TRANSPORTATION OF THE SPECIFIED SITE OF THE PURCHASED MACHINE.

FURTHERMORE WE OFFER:
-BELT CONVEYOR BELT CONVEYOR 1250 X 370 MM OF DREHZAHLSTEUEUNG WITH HOT AIR BLOWER HOTWIND 3400 W
-CONVEYOR BELT CONVEYORS MTF NL IE 010 255X30X100CM CLOCKED...
-CONVEYOR BELT CONVEYORS SALAMA 1000/400 L MOBILE 230V 120W
-INJECTION MOLDING MACHINE DEMAG ERGOTECH 330-2300 COMPACKT HANDLING
-INJECTION MOULDING MACHINE ARBURG ALLROUNDER 221-55-250 + ROBOT KLOCKE
-SPRITZGUSSMASCHIBE ANGEL'S 2550 H 500W 600 DUO 2 F
-CONVEYOR BELT CONVEYORS MTF GL IE 010 200X26X110CM CLOCKED...
-PALLET STRETCH-WRAPPER AROUND ROTOPLAT JOLLY 275 X 270 X 172 CM FOR PALLETS 1 X.
Vendedor: MEDCO Congreß-und Handels GmbH Halle
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)