281 ofertas

Año de construcción: 1990
Ubicación: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Vendedor: MJS-LINE GmbH

Equipment / Additional information: Clamping force: 3000 kN Max. Shot weight: 1300 grams (PE) For the production of components made of: Pe, PP, PB, PVDF • Wittmann Handling for parts removal • Automatic tool change WWS • Automatic tie rod program • Automatic cylinder change more

Año de construcción: 1994
Precio: 739.000 €
Ubicación: Land-nl NL Groenlo
Vendedor: Pfeifer Heavy Machinery B.V.

; Mileage [km]: 154594; Gross weight [kg]: 108000; Registration Number: W09301911KZM02022; Rear tyres remaining: 80; Front tyres remaining: 80; Lift height[mm]: 5000; Maximum lift capacity [kg]: 500000 more

Año de construcción: 1997
Ubicación: Land-pl PL 93320 Lodz, Sarmacka 8/25
Vendedor: PaGaPlast

Manufacturer/manufacturer: Demag Typ/type: Ergotech 35-120 Year/year: 1997 Control/controller: NC 4 Clamping force/clamping force: 35 to Holmabstand/Dist.Betw.Tiebars: 280 mm x 280 mm Disk size/platen size: 410 x 410 mm WZ height/mould hight: min 350 mm Opening/opening stroke: 530 mm Plate distance of max/Max open daylight: 880 mm Auger/screw size: 25 mm Stroke volume/shot volume: 61 ccm / 54 gram PS Spritzdr / injection pressure: 1890 bar General / General engine power: 13,5 kW Heating/heating power: 6,8 kW Dimensions/dimensions: 3.05 m x 1.3 m x 1.65 m Weight/weight: 2300 kg Screen text: German Options/optional extras EUROMAP more

Año de construcción: 1972
Ubicación: Lager Ennepetal H 3
Vendedor: Wirths GmbH, Werkzeugmaschinen

ram pressure: 160 t max. ram stroke: 300 mm dayligth: 645 mm diameter of piston: 250 mm surface area: 330 x 400 mm return capacity: 36 t operating pressure: 325 atü total power requirement: 12 kW weight of the machine ca.: 4,25 t dimensions of the machine ca.: 2,7 x 1,33 x 1,25 m horizontal hydraulic bending and straightening press. more

Año de construcción: 2000
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

injection moulding machine DEMAG Ergotech 200 - 840 compact warehouse no.: 502664 manufacturer: DEMAG Typ: Ergotech 200 - 840 compact Controller Unit: NC4 year of construction: 2000 technical data: Clamping unit type of drive: fully hydraulically clamping type: toggle method of construction: four tie bars clamping force: 2000 kN distance between tie bars h: 560 mm distance between tie bars v: 560 mm size of mould plates h: 830 mm size of mould plates v: 830 mm min. mould height: 310 mm max. mould height: 660 mm max. open daylight: 1235 mm opening stroke: 575 mm ejector stroke: 180 mm ejector force: 69 kN centring device diameter of moving platen: 160 mm centring dev ... more

Año de construcción: 1995
Ubicación: Deutschland
Vendedor: IMZ Maschinen Vertriebs GmbH

screw size: 18 mm injection shot weight in Polysterol: 20 g/PS closing pressure: 350 kN opening stroke: 350 mm mould space: 180 mm tool clamping area: 410x410 mm weight of tools max.: 230 kg ejector path: 100 mm capacity of ejector: 26,4 kN injection pressure: 2400 bar total power requirement: 15,5 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 3,2x1,3x1,8 m more

Año de construcción: 2002
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

injection moulding machine DEMAG ERGOtech 150-440 concept warehouse no.: 502592 manufacturer: DEMAG Typ: ERGOtech 150-440 concept Controller Unit: NC4 year of construction: 2002 warehouse no.: 502592 manufacturer: DEMAG Typ: ERGOtech 150-440 concept Controller Unit: NC4 year of construction: 2002 enquiry form email enquiry technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 1500 kN distance between tie bars h: 500 mm distance between tie bars v: 500 mm size of mould plates h: 750 mm size of mould plates v: 750 mm min. mould height: 250 mm max. mould height: 560 mm ... more

Año de construcción: 2003
Ubicación: Deutschland
Vendedor: IMZ Maschinen Vertriebs GmbH

screw size: 18 mm injection shot weight in Polysterol: 20 g/PS closing pressure: 350 kN opening stroke: 350 mm mould space: 180 mm tool clamping area: 460x450 mm weight of tools max.: 230 kg ejector path: 100 mm capacity of ejector: 26 kN injection pressure: 2870 bar total power requirement: 20 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,4x1,2x2,0 m more

Año de construcción: 2003
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

DEMAG Ergotech 80-420-200 system for sale warehouse no.: 502629 manufacturer: DEMAG Typ: ERGOtech 80-420-200 System Controller Unit: NC4 year of construction: 2003 operating hours: 34000 h Do you need one used DEMAG ERGOtech 80 / 420-200 system with only approx. 34,000 operating hours? On request, we can make you our non-binding offer. In order to ensure the functionality of the used injection molding machine, we will check the operation of the machine with the Sumitomo-Demag service. Afterwards, this machine will be repaired and can be inspect by you during dry-cycle test run. technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic me ... more

Año de construcción: 1988
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

feed pressure: 8 bar liter capacity: 6 m³/min total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1998
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Closing force: 500kN, screw diameter: 30mm, controls: DEMAG NC 4, length: 3800mm, width: 1200mm, height: 1800mm, weight: 2.5t, operational hours: ca. 85.000h, with hydraulic core pull and accessories. more

Año de construcción: 1988
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

feed pressure: 8 bar liter capacity: 6 m³/min total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1997
Ubicación: Land-de DE 52070 Aachen, Jülicher Str. 336
Vendedor: EuropNet GmbH

Year: 1997 Injection Unit: .../400 Screw diameter: 40 mm Injection pressure: 1828 bar Injection volume: 231 ccm Shot capacity: 205 g Clamping Unit: 80/... Clamping force: 80 t Platen size: 580 x 580 mm Distance between tie bars: 400 x 400 mm Mould height: 250 ... mm Opening storke: 450 mm Max.Daylight: 700 mm Ejector stroke: 150 mm General information: Delivery time: Off hand Machine dimensions(m) LxWxH: 4,3 x 1,3 x 1,7 m Weight: 3.600 kg Equipment: - Euromap 12 ?- Closed loop control for injection unit - ?Pneumatic valve more

Año de construcción: 2006
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

weight max.: 80 t height of stroke: . mm jib length max.: 50 0 more

Año de construcción: 1971
Precio: 7.500 €
Ubicación: Land-de DE
Vendedor: HV R. Heynlein

De MAG Hall crane, span 10 m, capacity 3,200 kg,. Hdqhk2d Currently, TÃ?V inspection manual available,. more

Año de construcción: 1988
Ubicación: Deutschland
Vendedor: Markus Hirsch GmbH

feed pressure: 8 bar liter capacity: 6 m³/min total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: usado
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Closing force: 2000kN, locking force: 2200kN, max. opening path: 575mm, tool installation height: 310-660mm, max.tool clamping plates distance: 1235mm, tool clamping plates dimensions: 830x830mm, distance between tie-bars: 560x560mm, max. tool weight: 2.5t, ejection path: 180mm, ejection force: 80kN, screw diameter: 40mm, stroke volume: 255cm³, controls: DEMAG NC4, length: 5700mm, width: 1700mm, height: 2100mm, weight: 9.6t, machine was overhauled in 2017. more

Año de construcción: usado
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

arm length: 4000 mm total column height: 4000 mm weight max. in kg: 1000 kg height of hook: 3200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 1998
Ubicación: Land-de DE
Vendedor: IDS Trade GmbH

Year of construction 1998 Clamping force of 500 kN Snails Ã? 30mm Control: NC 4 Dimensions: L = 3800 mm W = 1200 mm H = 1800 mm Weight: 2.5 t Facilities: -1 x hydraulic core pulling -Outlet combination -Printer -EUROMAP 12 interface -Adapter on EUROMAP 67 -4-way tap 29mchxm Hours of operation: ~ 85.000 h (Due to a change of IBED some years ago the machine count in the control unit is not correct. Estimated hours of operation. Machine was usually 2-ply) Condition: Machine is operational, Production currently in demand in the 2 - / 3-layer operation. more

Año de construcción: usado
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

arm length: 3500 mm total column height: 2700 mm weight max. in kg: 1000 kg height of hook: 2150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: usado
Precio: 350 €
Ubicación: Land-de DE Stuttgart
Vendedor: SER Sanierung im Erd- und Rückbau GmbH

Crane manufacturer Demag, swing arm, load 500 kg more

Año de construcción: 1975
Ubicación: Willich
Vendedor: Markus Hirsch GmbH

weight max.: 5 t stroke: 5500 mm clamping width: 20000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m more

Año de construcción: 2000
Precio: 10.950 £
Ubicación: Land-uk UK Wellingborough
Vendedor: STVmachinery

ID: 4952 Manufacturer: Demag Model: 350/320-35 Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2000 Clamp Force (t): 35 Screw Diameter (mm): 14 Max Shot Weight (PS) (g): 12 Control System: NC4 with centre rotary wheel Lead Time: 2 weeks from order Hours: 27341 In Production: Yes Location: Wellingborough, Northamptonshire Demag Ergotech 35T machine in excellent condition, full model code 350/320-35 System. This machine only has recorded run hours of 27341 which is very low indeed for this series of machine. The machine was originally specified as a small shot machine but we’ve got a number of plasticising units to offer with the machi ... more

Año de construcción: 1987
Ubicación: Land-de Germany, 47877 Willich - Neersen
Vendedor: Markus Hirsch GmbH

weight max.: 12,5 t stroke: 5,5 m clamping width: 18.99 m total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The crane includes brackets and guide rails 60m Coil device not included more

Año de construcción: 2002
Ubicación: Land-es Spain, 47151 Valladolid
Vendedor: MachinePoint

Clamping Force: 650 ton Shot Weight (Max): 2700 g more

Año de construcción: usado
Ubicación: Willich
Vendedor: Teutenberg Maschinen GmbH & Co.KG

quality: 1000 kg kg PILLAR TYPE DERRICK CRANE constr. Abus type vs year 1975 capacity 1.000 kg roller chassis with Demag pull length of action 5.000 mm height under load hook 2.560 mm total height 3.720 mm field of traverse 360 ° electrical connection 380 V 50 Hz more

Año de construcción: 1971
Ubicación: 68199 Mannheim, Altriperstr. 31
Vendedor: Jens Kürschner Maschinenhandel

Pillar jib crane Demag Lifting capacity 1000kg year 1971 Lower edge height jib approximately 3900 mm hook height approx. 3200 mm Throat depth approx. 6m The sale is carried out only to traders within the meaning of § 14BGB more

Año de construcción: usado
Ubicación: Willich
Vendedor: Teutenberg Maschinen GmbH & Co.KG

plate width: 1000 mm coil weight: 20 t quality: Unterflur underfloor COIL LIFTING CARRIAGE constr. Demag capacity ca. 20 to. motor 220/380 V, 50 Hz, 15 / 17,5 / 25 kW, 1440 rpm more

Año de construcción: 2013
Precio: 800 €
Ubicación: 91943 CIFER, Trnavska 15
Vendedor: FORMEX SK s.r.o.

BJ. 06/2013 Hook path 4 m, load capacity 0.5 t Stroke 4.5/1.1 m / min probably never in use - optically like new more

Año de construcción: 2009
Ubicación: Lager
Vendedor: Leyendecker & Hollmann GmbH

Control: SIEMENS Sinumerik 840 D longitudinal stroke: 5500 mm vertical stroke: 650 vertical stroke: 450 mm grinding head swivelling (right/left): 20 Grad grinding wheel: bore: 127 mm Width: 160 mm diameter: 400 mm grinding wheel speed: 1-50 m/sec grinding spindle drive: 75 kW Mägerle CNC Rack Grinding Center with movable splashback construction for shuttle machining for soft and hardened rack. Comes with 2 working tables with clamping surface 1450 x 350 mm each. - Fully automatic profile rolling device, completely integrated into the control, including CD dressing program, roller drive with AC motor - table rolling device mounted on one side, fully integrated into the control, for the rece ... more

Año de construcción: 1995
Ubicación: AG
Vendedor: D&M MACHINERY LTD

800TON more

Año de construcción: 1963
Ubicación: Nürnberg
Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

weight max.: 0,125 / 0,25 t stroke: 3000 mm clamping width: mm stroke speed: 125kg 8 / 250kg 4 m/min total power requirement: 0,13 kW weight of the machine ca.: 0,30 t dimensions of the machine ca.: m electrical chain hoist no fine hoist more

Año de construcción: usado
Ubicación: Dreieich
Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH

arm length: 3000 m total column height: 3,53 m weight max. in kg: 250 kg stroke height: 2,60 m total height over floor: 3,536 mm stroke speed: 1,25 / 5,00 m/min total power requirement: 0,13 / 0,50 kW weight of the machine ca.: t dimensions of the machine ca.: 3,00 x 3,00 x 3,53 m more

Año de construcción: 1994
Ubicación: D - 77815 Bühl
Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH

volume capacity: 5,63 m³/min : 1 bar : 8 bar turning speeds: 3000 U/min engine output: 37 kW total power requirement: kW weight of the machine ca.: t dimensions: 1,35 x 1,05 x 1,43 m more

Año de construcción: 1996
Ubicación: 93320 Lodz, Sarmacka 8/25
Vendedor: PaGaPlast

Manufacturer/manufacturer: Demag Typ/type: Ergotech 150-840 compact Year/year: 1996 Control/controller: NC 4 Clamping force/clamping force: 150 to Holmabstand/Dist.Betw.Tiebars: 500 x 500 mm WZ height/mould hight: min 250 mm max 560 mm (660 mm) Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 1060 mm (1160 mm) Auger/screw size: 50 mm (bimetal) stroke volume/shot volume: 442 CC / 400 gram PS spec. Spritzdr / injection pressure: 1946 bar General / General engine power: 30 kW Heating/heating power: 14,8 kW Operating hours/working hours: 32000 h Dimensions/dimensions: 5.5 m x 1.6 m x 2.10 m Weight/weight: 7000 kg Screen text/language: German Options/opti ... more

Año de construcción: 2010
Ubicación: Land-de DE 26215 Wiefelstede, Germany
Vendedor: Theodor Eberlei GmbH & Co.KG

Material gripper, manipulator, lifting aid, lifting device, hoist, Demag - KBK -Manipulator with 5 axes -pneumatic gripper capacity 40 kg -pneumatic gripper swiveling / rotating -1x Transport Dimensions 1170/330 / H480 mm -1x Transport Dimensions 7050/800/H400 mm -weight 504 kg more

Año de construcción: usado
Precio: 35.000 GBP
Ubicación: Land-uk UK FLINT
Vendedor: Lex Machinery Ltd

Complete Seitz filling line for 650ml and 1,000ml glass bottles. In full working condition, last filling a vitamin nutrition product. Line speed 40 bottles per minute. SEN Depalletiser and bottle sorter. SEN 12 head rotary pressure filler, year 1988. SEN ROPP capper, year 1988, last used on 28mm dia caps. Herma wrap around labeller, year 2006, with Allen hot foil coder. Harro Höfliger CAR 10 hot glue cartoner, max box size 100mm x 100mm x 270mm long, year 1992, with Nordson series 3000 glue applicator and pre-folded leaflet inserter. Rocco type 880 case packer, speed 5 cases per minute, year 1992. Rocco type 755 Case Sealer, year 1992, speed 15 cases per minute. Palletiser for wrapping seal ... more

Año de construcción: 2008
Ubicación: Land-de DE 26215 Wiefelstede, Germany
Vendedor: Theodor Eberlei GmbH & Co.KG

Wall-mounted slewing crane, overhead slewing crane, overhead crane, workstation crane, material grab, manipulator, lifting aid, lifting device, hoist -Bearing capacity 110 kg -with Demag cable pull type D-BP 110 with pneumatic connections -Unloading 2,600 mm -Total height 1300 mm -Hook height 2000 mm (rope length) -Swivel range 180 ° -1x material grab Manipulator Zasche type GP 38-2X20 Capacity 40 kg -1x vacuum lifter manipulator Zasche type GVS 28-4 capacity 45 kg -Crane transport dimensions 5230/800 / H715 mm -Accessories Transport Dimensions 1200/800 / H640 mm -Eigen weight 258 kg more

Año de construcción: 1981
Ubicación: Land-fi FI
Vendedor: JADE Trading OY

Injection Molding Machine Demag DNC II 175 This Demag Injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. The machine is used in laboratory test production and training purposes only, not in actual production ever. We dismantled it in 2008 and took it to our warehouse where it is today. It looks to be in good condition. Technical description: Manufacturer: Mannesmann Demag Kunstofftechnik, Germany Type: M-Type DEMAG DNC II 175 Year: 1981 – very little used Screw diameter: 52 mm, 16D Clamping force: 1750kN Injection volume: 380 cm3 Control: microprocessor control ... more

Año de construcción: 2010
Precio: 3.650 €
Ubicación: Land-de DE 26215 Wiefelstede, Germany
Vendedor: Theodor Eberlei GmbH & Co.KG

Column jib crane, overhead crane, workstation crane, material grab, manipulator, lifting aid, lifting device, hoist, crane foundation plate -Bearing capacity 80 kg -with intermediate plate / base plate, foundation plate -with chain hoist Demag type DCS-PRO 1-80 1/1 H5 VS30-30 -Hub speed 0.15 - 30 m / min -Unloading 6,000 mm -Overall height 3,980 mm -Hook height mm -Swivel range 270 ° -Transport Dimensions 6000/800 / H700 mm -weight 486 kg more

Año de construcción: 1995
Ubicación: Recklinghausen
Vendedor: RAG Mining Solutions GmbH

Crane Demag Operating voltage: 500 Dimensions: 100 x 120 x 100 (D x W x H in cm) Weight: approx. 500 kg --> free for sale from 01.01.2018 more

Año de construcción: 1986
Ubicación: Stockstadt a. Rhein
Vendedor: GK Werkzeugmaschinen GmbH

grinding length:600 mm grinding width:300 mm workpiece height:375 mm max. table load:300 kg dimensions of grinding wheel:300x76,2x50 mm weight of the machine ca.:3800 kg spindle drive:2,8 - 8,4 kW (100% ED) kW Used / overhauled surface grinding machine, Make ELB, type Super Rubin 024 NC-K. Machine no. 189910186 Machine bed made Microgranitan. Machine with table drive system via a toothed belt. Very smooth running. Schnellhubsystem. Table speed controllable. Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machin ... more

Año de construcción: usado
Ubicación: Bottrop
Vendedor: RAG Mining Solutions GmbH

Bridge crane 10 t Demag -Lifting capacity 10 t -Wingspan approx. 25 m Weight: 16,000 kg free--> for sale at the 01.01.2019 more

Año de construcción: 1981
Ubicación: Stockstadt a. Rhein
Vendedor: GK Werkzeugmaschinen GmbH

grinding length:500 mm grinding width:250 mm workpiece height:375 mm table clamping surface LxW:760x200 mm :500x250 mm distance between table/spindle:525 mm :2-28 m/min :1,2 m/min :1-30 mm/Hub :0,02 mm vertical feed autom.:0,002-0,06 mm :0,15 m/min :0,02 mm :0,001 mm :1400/2800 1/min diameter / bore of grinding wheel:300/76,2 mm grinding wheel wide min./max.:25/30 mm :3,7/4,5 kW hydraulic pump:1,5 kW :0,1 kW vertical feed motor:1,7 kW wet grinding attachment:0,15 kW :1600 kg :1,9x1,5x1,95 m Used surface grinding machine, Make ELB, HAHN & KOLB, type ORION 525 ND, built in 1981, Machine no .: 17650 (49564) Machine with automatic infeed in all 3 axes. Machine cleaned thoroughly and by qualified ... more

Año de construcción: 1994
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Closing force: 6500kN, tie bar distance: 900x900mm, mould opening: 930mm, mould height: 500-1200mm, shot volume: 4090cm³, shot weight: 3650g, screw diameter: 110mm, injection pressure: 1710bar, connected load: 142kW, control: NC 3, length: 11256mm, width: 2245mm, height: 2390mm, weight: 24t, operational hours: ca. 82.000h, including handling robot WITTMANN W633-0810, enclosure and cpnveyor belt: 4000x1000mm, available after January 2018. more

Año de construcción: 1971
Precio: 6.500 €
Ubicación: Land-de DE 26215 Wiefelstede, Germany
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: 1999
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Volume flow: 0.90m³/min, max. working pressure: 10bar, length: 580mm, width: 520mm, height: 950mm, weight: 160kg, operational hours: ca. 44.000h, load hours: ca. 28.000h, Compressor was regularly maintained. more

Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-ch CH Switzerland, 2740 Moutier
Vendedor: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 11000 x 1500 x 1000 mm Description: Rail length 2x 11000 mm, truss width 7600 mm, capacity 1x 1000 kg, 1x 250 kg, without telescope holder and vacuum device more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)