Contenedor de mercancías peligrosas, capa de protección contra incendios REI 90 / F 90 DENIOS BMC-X 600-K-T90-2

Hazardous goods container, REI 90 / F 90 fire protection warehouse type WFP, cantilever racks, interior lighting, drive-on ramp, leakage sensor – used - :

Price ex location: 29.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly!

Manufacturer: Denios
Year of Make: 2013
Type: BMC-X 600-K-T90-2
Type: REI 90 / F 90 Fire Protection Bearing WFP-X 14;
Surface room system
Exterior paint RAL 9002 grey-white
Interior paint RAL 9002 grey-white
Door finish (both sides) RAL 9002 Grey White
Dimensions
Inside Exterior without extensions
Width (mm) 2,560 2,952
Depth (mm) 5,500 5,938
Height (mm) 2,500 2,924
Collection volume
Collection volume steel trough 1,560 litres
Door arrangement short side
Stainless Steel Door Handle with Anti-Panic Version 1 ST
Technical ventilation fire protection system 1 ST
Exhaust air monitoring 1 pc
Door hold-open system 1-leaf door 1 ST
Pallet truck gratings WFP 14 1 ST
Cantilever rack 8 pcs
Interior Lighting Ex 42 Watt LED 1 ST
Pallet truck access. Steel ramp 1 pc
Surge protection 1 pc
Leakage Sensor SpillGuard Connect 1 ST
Emergency exit sign (fluorescent) 1 pc
Control 1 ST
• Safety storage for water-polluting substances (WGK 1-3) and flammable,
Toxic and oxidizing media according to GHS
• Roof and side walls made of fire-resistant cladding (EI120) with fire protection
from the inside and outside. Fire protection in the floor area by means of suitable on-site
Underground
• Roof drainage is provided by an integrated rain gutter with
internal drains on the short sides
• Production according to DIN EN 1090-2
• Flexible indoor or outdoor installation on a concrete surface
• Frame construction according to static requirements
• Constructive equipotential bonding by grounding the steel frame construction
• Hot-dip galvanized spill pan made of steel S235JR (workshop no. 1.0038) according to DIN EN
10025, 5mm material thickness, corrosion protection at least 5 years
• Leak test of the drip pan according to EN ISO 3452-1 with factory test certificate
• Without ground clearance. There is no possibility of underway for industrial trucks
given
• Front plates for fixing the room system to the concrete slab
• Corrosivity class C3-M according to DIN EN 12944, Part 1
• Monochrome 2K PUR lacquer in RAL colour
• Self-closing fire door with overhead door closer and anti-panic
Handle set, lockable by locking cylinder with Euro profile 17mm
• Convenient access through low door threshold of 147 mm
• Shelves with hot-dip galvanized, removable grating supports
• Dismountable transport mounts in the roof area
Roof drainage
• Innovative DENIOS roof drainage system
• Prevents rainwater from accumulating on the roof
• Special drainage system – rainwater is not visibly led to the ground in the frame
Position of roof drainage RD1 + RD4
Planned location of the room system: Indoor installation
The mesh size of the gratings is 33x11mm
Technical ventilation
• Primary explosion protection in accordance with the Technical Rules for Hazardous Substances for Prevention
of flammable vapour-air mixtures
• Fan in explosion-proof version for Ex Zone 1 (marking
according to ATEX Directive 2014/34/EU : Ex II 2G Ex h IIC(H2) T6 Gb), designed as an endurance runner
• Fan housing and fan wheel made of painted or galvanized sheet steel
• Weather protection housing, located on the outside of the hazardous materials warehouse
• Diagonally aligned cross ventilation
• Supply and exhaust air openings weather-protected and secured by fire dampers
• Intake and exhaust nozzle DN 125 with protective grille
Air exchange rate per hour: 5 times
Pressure switch in explosion-proof design
• To monitor technical ventilation
• Differential pressure switch for volume flow control by means of differential pressure measurement
• Maintenance-free
• For gaseous, non-aggressive media.
• Potential-free relay output
• Sensor as piezo pressure transmitter
• Zero Adjustment
• Shift delay to avoid error messages (factory setting 20 sec)
• Permissible ambient temperature -20...+50 °C
• Permissible humidity 0...95% RH, non-condensing.
• Housing made of painted die-cast aluminium, protection class IP 66
• Backlit display, can be switched off.
• Password locking
• Visual and acoustic signal on the control cabinet when the limit falls below
required exhaust air volume, self-acknowledging fault message
• Explosion-proof design (marking according to ATEX Directive 2014/34/EU : EX
II 2(1) Ex emb[ia] IIC T6)
Cantilever racks
Interior lighting
Drive-on ramp
Leakage Sensor SpillGuard Connect

Former new price: 49.000.-€
Condition: good – very good, nothing leaked and it was only equipped with closed containers for storage.
Available: immediately
Location: 79312 Emmendingen

Detailed offer data as PDF on request.
seller offer No. resale 169278865