19 ofertas

Año de construcción: usado
Ubicación: Land--arburg allrounder centex 320 cd-500-225
-clamping force 50 t
-with walldorf-handling
-from model year 1998
-tie bar distance 32 x 32 screw diameter 35
-heating 9.4 kw
-control: dialogika bj 1998-updated mature, but only an expression
-universal range of application -ARBURG ALLROUNDER CENTEX 320 CD-500-225 -CLAMPING FORCE 50 T -WITH WALLDORF-HANDLING -FROM MODEL YEAR 1998 -TIE BAR DISTANCE 32 X 32 SCREW DIAMETER 35 -HEATING 9.4 KW -CONTROL: DIALOGIKA BJ 1998-UPDATED MATURE, BUT ONLY AN EXPRESSION -UNIVERSAL RANGE OF APPLICATION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-weight approx.: 7200 kg<br/>dimensions (l x w x h) approx.: 3400 x 3300 x 2910 mm<br/>description: table size 900 x 550 mm, table load 800 kg, displacements x / y / z 700/630/480 mm, feed rates up to 10 m / min, rapid traverse 30 m / min, spindle intake din 69871-40 (sk 40), spindle speed 30-8000 rpm, 30 tools in warehouse, control dialog 112, blum tool break detection, knoll clamping conveyor WEIGHT APPROX.: 7200 KG
DIMENSIONS (L X W X H) APPROX.: 3400 X 3300 X 2910 MM
DESCRIPTION: TABLE SIZE 900 X 550 MM, TABLE LOAD 800 KG, DISPLACEMENTS X / Y / Z 700/630/480 MM, FEED RATES UP TO 10 M / MIN, RAPID TRAVERSE 30 M / MIN, SPINDLE INTAKE DIN 69871-40 (SK 40), SPINDLE SPEED 30-8000 RPM, 30 TOOLS IN WAREHOUSE, CONTROL DIALOG 112, BLUM TOOL BREAK DETECTION, KNOLL CLAMPING CONVEYOR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-closing force: 50t, distance between tie bars: 320x320mm, screw diameter: 35mm, heating output: 9.4kw, controls: arburg dialogika, including handling walldorf.  CLOSING FORCE: 50T, DISTANCE BETWEEN TIE BARS: 320X320MM, SCREW DIAMETER: 35MM, HEATING OUTPUT: 9.4KW, CONTROLS: ARBURG DIALOGIKA, INCLUDING HANDLING WALLDORF.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 560 mm<br/>y-travel: 500 mm<br/>z-travel: 390 mm<br/>control: dialog 11 <br/>tool taper: sk 40 <br/>no. of tools in magazin: 20 <br/>spindle turning speed range: 21x 40-4000 u/min<br/>feeds longditudinal/cross/vertical: 2 - 4000 mm/min<br/>rapid travel x/y/z: 4000 mm/min<br/>milling head -swivable: 90 grad<br/>main drive motor: 2,0 / 4,0 kw<br/>table load capacity: 800 kg<br/>wotkpiece diameter with 2 vacant positions: 100 mm<br/>workpiece diameter at full load: 80 mm<br/>tool length - max.: 300 mm<br/>weight of tools max.: 6 kg<br/>table surface area: 900 x 530 mm<br/>total power requirement: 15,00 kw<br/>weight of the machine ca.: 3,50 t<br/>dimensions of the machine ca.: 3,70 x 3,40 x 2,20 m<br/><br/><br/><br/><br/> X-TRAVEL: 560 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 390 MM
CONTROL: DIALOG 11
TOOL TAPER: SK 40
NO. OF TOOLS IN MAGAZIN: 20
SPINDLE TURNING SPEED RANGE: 21X 40-4000 U/MIN
FEEDS LONGDITUDINAL/CROSS/VERTICAL: 2 - 4000 MM/MIN
RAPID TRAVEL X/Y/Z: 4000 MM/MIN
MILLING HEAD -SWIVABLE: 90 GRAD
MAIN DRIVE MOTOR: 2,0 / 4,0 KW
TABLE LOAD CAPACITY: 800 KG
WOTKPIECE DIAMETER WITH 2 VACANT POSITIONS: 100 MM
WORKPIECE DIAMETER AT FULL LOAD: 80 MM
TOOL LENGTH - MAX.: 300 MM
WEIGHT OF TOOLS MAX.: 6 KG
TABLE SURFACE AREA: 900 X 530 MM
TOTAL POWER REQUIREMENT: 15,00 KW
WEIGHT OF THE MACHINE CA.: 3,50 T
DIMENSIONS OF THE MACHINE CA.: 3,70 X 3,40 X 2,20 M




Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-technical data:

brand: cover

type: fp 3

control: dialog 4

-traverse path x approx. 400 mm, y 400 mm, z 500 mm

-solid angle table

-speed: up to 5000 rpm

-milling head swiveling

-sleeve: sk 40

-weight ca: 2000 kg

-space ca: t: 2.80 m, b: 2.20 m, h: 2.0 m

TECHNICAL DATA: BRAND: COVER TYPE: FP 3 CONTROL: DIALOG 4 -TRAVERSE PATH X APPROX. 400 MM, Y 400 MM, Z 500 MM -SOLID ANGLE TABLE -SPEED: UP TO 5000 RPM -MILLING HEAD SWIVELING -SLEEVE: SK 40 -WEIGHT CA: 2000 KG -SPACE CA: T: 2.80 M, B: 2.20 M, H: 2.0 M
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-weight approx.: 7500 kg<br/>dimensions (l x w x h) approx.: 5000 x 2200 x 2100 mm<br/>description: turning diameter 310 mm turning length 1000 mm control vdf b2/t turning speed range 31,5 - 5000 u/min feed stepless 0,001 - 9999,999 mm/min rapid traverse 10000 mm/min spindle hollow 52 mm turning diameter without crash 240 mm max. torque on the spindle 800 nm total power requirement 26 kw weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 2,20 x 2,10 m !!machine is defective. only for spareparts!! WEIGHT APPROX.: 7500 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2200 X 2100 MM
DESCRIPTION: TURNING DIAMETER 310 MM TURNING LENGTH 1000 MM CONTROL VDF B2/T TURNING SPEED RANGE 31,5 - 5000 U/MIN FEED STEPLESS 0,001 - 9999,999 MM/MIN RAPID TRAVERSE 10000 MM/MIN SPINDLE HOLLOW 52 MM TURNING DIAMETER WITHOUT CRASH 240 MM MAX. TORQUE ON THE SPINDLE 800 NM TOTAL POWER REQUIREMENT 26 KW WEIGHT OF THE MACHINE CA. 7,5 T DIMENSIONS OF THE MACHINE CA. 5,0 X 2,20 X 2,10 M !!MACHINE IS DEFECTIVE. ONLY FOR SPAREPARTS!!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control brother dialog
travel x / y / z: 420/300/250 mm
spindle speed 6000 min-1
tool magazine for 10 tools bt 30
table size 600 x 300 mm CONTROL BROTHER DIALOG TRAVEL X / Y / Z: 420/300/250 MM SPINDLE SPEED 6000 MIN-1 TOOL MAGAZINE FOR 10 TOOLS BT 30 TABLE SIZE 600 X 300 MM
Vendedor: WMH24
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 2200 x 1700 x 1900 mm<br/>description: control system dialog 4<br> - table 900 x 530 mm<br> - longitudinal travel (x, y, z-axis) 560 x 500 x 400 mm<br> - vertical spindle speed 31,5 - 3150 rpm<br> - feeds 2 - 3200 mm/min<br> - spindle motor 4 kw<br> - chip tray<br> - with accessories<br> - see photos - this article is intended for sale outside the eu area. WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 1700 X 1900 MM
DESCRIPTION: CONTROL SYSTEM DIALOG 4
- TABLE 900 X 530 MM
- LONGITUDINAL TRAVEL (X, Y, Z-AXIS) 560 X 500 X 400 MM
- VERTICAL SPINDLE SPEED 31,5 - 3150 RPM
- FEEDS 2 - 3200 MM/MIN
- SPINDLE MOTOR 4 KW
- CHIP TRAY
- WITH ACCESSORIES
- SEE PHOTOS - THIS ARTICLE IS INTENDED FOR SALE OUTSIDE THE EU AREA.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-controls: deckel dialog 11e, operational hours: ca. 22,000h.  CONTROLS: DECKEL DIALOG 11E, OPERATIONAL HOURS: CA. 22,000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 42.840 €
Ubicación: Land-: 2.050 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 1.700 mm<br/>: 400 mm<br/>: 104 mm<br/>: 900 mm<br/>: 350 mm<br/>: 650 mm<br/>: 100 lt<br/>: 3.200 mm<br/>: 1.200 mm<br/>: 2.350 mm<br/>: 3.550 kg<br/>4 axes (y1, y2, x and r axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8 sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,-   cnc controlled r-axis ? 5.550,-<br/>(included)   cnc crowning table ? 1.390,-<br/>(included)   quick connecting terminals for the upper tool ? 330,-   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 2.050 mm <br/>bending force: 60 to <br/>axis: 4 (y1, y2, x, r) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 7,5 kw <br/>distance between columns: 1.700 mm <br/>daylight: 400 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 350 mm <br/>travel of back gauge (x): 650 mm <br/>oiltank: 100 lt<br/>length: 3.200 mm <br/>width: 1.200 mm <br/>height: 2.350 mm <br/>weight: 3.550 kg<br/><br/><br/><br/> : 2.050 MM
: 60 TO
: 7,5 KW
: 1.700 MM
: 400 MM
: 104 MM
: 900 MM
: 350 MM
: 650 MM
: 100 LT
: 3.200 MM
: 1.200 MM
: 2.350 MM
: 3.550 KG
4 AXES (Y1, Y2, X AND R AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8 SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)


OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,- CNC CONTROLLED R-AXIS ? 5.550,-
(INCLUDED) CNC CROWNING TABLE ? 1.390,-
(INCLUDED) QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 330,- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 2.050 MM
BENDING FORCE: 60 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 1.700 MM
DAYLIGHT: 400 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 350 MM
TRAVEL OF BACK GAUGE (X): 650 MM
OILTANK: 100 LT
LENGTH: 3.200 MM
WIDTH: 1.200 MM
HEIGHT: 2.350 MM
WEIGHT: 3.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-manufacturers cover
type fp5 - 80t
built in 1993
control type: dialog 11

x-axis 800.0 mm
y-axis 550.0 mm
z-axis 500.0 mm
table length 1100.0 mm
table width 550.0 mm

technical data
the offset of the x-axis: 800 mm
y axis displacement: 550 mm
process axis of: 500 mm
pendulum table: 1100 mm x 550 mm
spindle speed: 0-5000 rpm

general
service manual: yes
tool magazine: 30 piece
control: german
opening hours:
height: 2,3 m
length: 5.7 m
width: 6.2 m
weight: 5500 kg
power supply: 380 v MANUFACTURERS COVER TYPE FP5 - 80T BUILT IN 1993 CONTROL TYPE: DIALOG 11 X-AXIS 800.0 MM Y-AXIS 550.0 MM Z-AXIS 500.0 MM TABLE LENGTH 1100.0 MM TABLE WIDTH 550.0 MM TECHNICAL DATA THE OFFSET OF THE X-AXIS: 800 MM Y AXIS DISPLACEMENT: 550 MM PROCESS AXIS OF: 500 MM PENDULUM TABLE: 1100 MM X 550 MM SPINDLE SPEED: 0-5000 RPM GENERAL SERVICE MANUAL: YES TOOL MAGAZINE: 30 PIECE CONTROL: GERMAN OPENING HOURS: HEIGHT: 2,3 M LENGTH: 5.7 M WIDTH: 6.2 M WEIGHT: 5500 KG POWER SUPPLY: 380 V
Vendedor: PaGaPlast
Año de construcción: usado
Precio: 60.210 €
Ubicación: Land-: 4.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 5.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 12.850 ~  kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 175 to <br/>axes: y1 / y2 and x axes<br/>upper tool: 75° divided <br/>lower tool: 4 v- die 16,22,35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 18,5 kw <br/>length: 5.250 mm <br/>width: 1.700 mm <br/>height: 2.750 mm<br/>weight: ~ 12.850 kg<br/><br/><br/><br/> : 4.050 MM
: 175 TO
: 18,5 KW
: 5.250 MM
: 1.700 MM
: 2.750 MM
: 12.850 ~ KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 175 TO
AXES: Y1 / Y2 AND X AXES
UPPER TOOL: 75° DIVIDED
LOWER TOOL: 4 V- DIE 16,22,35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 18,5 KW
LENGTH: 5.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: ~ 12.850 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-type: horizontal machining center manufacturer: okuma type designation: ma 400 ha year: 02 / 2004
control: osp e 100 m with imap dialog availability. calender week 14 in werlte on hours: 55536 h
cutting time: 24892 h ability to purchase from site with reduced price organization of loading and transportation throughout the us possible technical data x axis travel: 560 mm
y-axis travel: 610 mm
z axis travel: 625 mm
b axis: 0.001 degrees x-y-z m/min rapid traverse: 60-60 - 60
spindle speed: 50-8000 rpm; 
spindle power: 22 kw number of pallets: 2 pcs. 
pallet dimensions: 400 x 400 mm
maximum table load: 400 kg
tool magazine: 102 items (rack) toolholder: bt 40

weight: 11400 kg
dimensions: 2400 x 4500 x 2780 mm

additional features - interface rs 232 - conveyors - ikz 15 bar new spindle in the feb. 2018

error, printing errors, changes and expressly subject to prior sale TYPE: HORIZONTAL MACHINING CENTER MANUFACTURER: OKUMA TYPE DESIGNATION: MA 400 HA YEAR: 02 / 2004 CONTROL: OSP E 100 M WITH IMAP DIALOG AVAILABILITY. CALENDER WEEK 14 IN WERLTE ON HOURS: 55536 H CUTTING TIME: 24892 H ABILITY TO PURCHASE FROM SITE WITH REDUCED PRICE ORGANIZATION OF LOADING AND TRANSPORTATION THROUGHOUT THE US POSSIBLE TECHNICAL DATA X AXIS TRAVEL: 560 MM Y-AXIS TRAVEL: 610 MM Z AXIS TRAVEL: 625 MM B AXIS: 0.001 DEGREES X-Y-Z M/MIN RAPID TRAVERSE: 60-60 - 60 SPINDLE SPEED: 50-8000 RPM; SPINDLE POWER: 22 KW NUMBER OF PALLETS: 2 PCS. PALLET DIMENSIONS: 400 X 400 MM MAXIMUM TABLE LOAD: 400 KG TOOL MAGAZINE: 102 ITEMS (RACK) TOOLHOLDER: BT 40 WEIGHT: 11400 KG DIMENSIONS: 2400 X 4500 X 2780 MM ADDITIONAL FEATURES - INTERFACE RS 232 - CONVEYORS - IKZ 15 BAR NEW SPINDLE IN THE FEB. 2018 ERROR, PRINTING ERRORS, CHANGES AND EXPRESSLY SUBJECT TO PRIOR SALE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Precio: 47.810 €
Ubicación: Land-: 3.050 mm<br/>: 135 to<br/>: 530 mm<br/>: 265 mm<br/>: 410 mm<br/>: 15 kw<br/>: 4.200 mm<br/>: 1.680 mm<br/>: 2.750 mm<br/>: 10.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 135 to <br/>daylight opening: 530 mm <br/>stroke: 265 mm <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 and x axes <br/>upper tool: 75° gooseneck, sectioned <br/>lower tool: 4-v die 16, 22, 35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc <br/>back gauge: cnc controlled <br/>motor power: 15 kw <br/>length: 4.200 mm <br/>width: 1.680 mm <br/>height: 2.750 mm<br/>weight: 10.500 kg<br/><br/><br/><br/> : 3.050 MM
: 135 TO
: 530 MM
: 265 MM
: 410 MM
: 15 KW
: 4.200 MM
: 1.680 MM
: 2.750 MM
: 10.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 135 TO
DAYLIGHT OPENING: 530 MM
STROKE: 265 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 AND X AXES
UPPER TOOL: 75° GOOSENECK, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 15 KW
LENGTH: 4.200 MM
WIDTH: 1.680 MM
HEIGHT: 2.750 MM
WEIGHT: 10.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 9.500 €
Ubicación: Land-lid fp5 nc
cnc tool room milling machine

year of construction: 1985
control: dialog 4
machine number: 2806-0335
traverse paths: x - 710 mm / y - 600 mm / z - 450 mm
speed range: 18... 6,300 rpm
chuck sk40
table size: 550 x 1000 mm

facilities:
9 tool holders
electronic handwheel
coolant system
cab
machine feet
dnc pc and software car dnc v1 8
manual / documentation
machine parameters

other specifications on request

the machine can be visited by appointment

delivery ex location d-95349 thurnau / free loading truck
delivery immediate / intermediate sales reserved LID FP5 NC CNC TOOL ROOM MILLING MACHINE YEAR OF CONSTRUCTION: 1985 CONTROL: DIALOG 4 MACHINE NUMBER: 2806-0335 TRAVERSE PATHS: X - 710 MM / Y - 600 MM / Z - 450 MM SPEED RANGE: 18... 6,300 RPM CHUCK SK40 TABLE SIZE: 550 X 1000 MM FACILITIES: 9 TOOL HOLDERS ELECTRONIC HANDWHEEL COOLANT SYSTEM CAB MACHINE FEET DNC PC AND SOFTWARE CAR DNC V1 8 MANUAL / DOCUMENTATION MACHINE PARAMETERS OTHER SPECIFICATIONS ON REQUEST THE MACHINE CAN BE VISITED BY APPOINTMENT DELIVERY EX LOCATION D-95349 THURNAU / FREE LOADING TRUCK DELIVERY IMMEDIATE / INTERMEDIATE SALES RESERVED
Vendedor: KISTNER GmbH & Co.KG
Año de construcción: usado
Precio: 34.100 €
Ubicación: Land-: 1.250 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 1.050 mm<br/>: 160 mm<br/>: 400 mm<br/>: 104 mm<br/>: 900 mm<br/>: 350 mm<br/>: 750 mm<br/>: 100 lt<br/>: 2.150 mm<br/>: 2.200 mm<br/>: 2.350 mm<br/>: 3.350 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>manual adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled crowning table ? 1.390,--   cnc controlled r-axis ? 5.040,--   quick connecting terminals for the upper tool ? 250,--   hydraulic or pneumatic tool clamping on request   <br/> <br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 1.250 mm <br/>bending force: 40 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: ja <br/>back gauge: cnc conrolled<br/>motor power: 7,5 kw  <br/>distance between columns: 1.050 mm<br/>stroke: 160 mm<br/>daylight: 400 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 350 mm <br/>travel of back gauge (x): 750 mm <br/>oiltank: 100 lt<br/>length: 2.150 mm <br/>width: 2.200 mm <br/>height: 2.350 mm<br/>weight: 3.350 kg<br/><br/><br/><br/> : 1.250 MM
: 60 TO
: 7,5 KW
: 1.050 MM
: 160 MM
: 400 MM
: 104 MM
: 900 MM
: 350 MM
: 750 MM
: 100 LT
: 2.150 MM
: 2.200 MM
: 2.350 MM
: 3.350 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
MANUAL ADJUSTABLE CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED CROWNING TABLE ? 1.390,-- CNC CONTROLLED R-AXIS ? 5.040,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 250,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST
 
WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 1.250 MM
BENDING FORCE: 40 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 1.050 MM
STROKE: 160 MM
DAYLIGHT: 400 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 350 MM
TRAVEL OF BACK GAUGE (X): 750 MM
OILTANK: 100 LT
LENGTH: 2.150 MM
WIDTH: 2.200 MM
HEIGHT: 2.350 MM
WEIGHT: 3.350 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-tool room milling machine
manufacturer: deckel ag,munich,germany
type/model: fp-3a
serial no.: 2804-1134
new in: 1987
control: made grundig, bosch-dialog
technical data:
1. table size : 700 x460 mm
2. travels x/y/z : 500/300/400mm
3. taper of spindle: iso40
4. range of spindle speed: 25...2500 rpm
5. voltage: 380v/50hz
6.power main drive motor: 4,0 kw
7.weight of machine: 1950kg TOOL ROOM MILLING MACHINE MANUFACTURER: DECKEL AG,MUNICH,GERMANY TYPE/MODEL: FP-3A SERIAL NO.: 2804-1134 NEW IN: 1987 CONTROL: MADE GRUNDIG, BOSCH-DIALOG TECHNICAL DATA: 1. TABLE SIZE : 700 X460 MM 2. TRAVELS X/Y/Z : 500/300/400MM 3. TAPER OF SPINDLE: ISO40 4. RANGE OF SPINDLE SPEED: 25...2500 RPM 5. VOLTAGE: 380V/50HZ 6.POWER MAIN DRIVE MOTOR: 4,0 KW 7.WEIGHT OF MACHINE: 1950KG
Vendedor: ALM Trade Sro
Año de construcción: usado
Precio: 78.110 €
Ubicación: Land-: 4.050 mm<br/>: 320 to<br/>: 630 mm<br/>: 365 mm<br/>: 410 mm<br/>: 37 kw<br/>: 5.300 mm<br/>: 1.910 mm<br/>: 3.230 mm<br/>: 21.000 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>(sample photos)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 640 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 320 to <br/>daylight opening: 630 mm <br/>stroke: 365 mm <br/>gap in sideframes: 410 mm <br/>axis: 3 (y1, y2, x)<br/>upper tool: 75° goose neck, sectioned <br/>lower tool: 4-v die 16, 22, 35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 37 kw <br/>length: 5.300 mm <br/>width: 1.910 mm <br/>height: 3.230 mm<br/>weight: 21.000 kg<br/><br/><br/><br/> : 4.050 MM
: 320 TO
: 630 MM
: 365 MM
: 410 MM
: 37 KW
: 5.300 MM
: 1.910 MM
: 3.230 MM
: 21.000 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTOS)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 640 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 320 TO
DAYLIGHT OPENING: 630 MM
STROKE: 365 MM
GAP IN SIDEFRAMES: 410 MM
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 37 KW
LENGTH: 5.300 MM
WIDTH: 1.910 MM
HEIGHT: 3.230 MM
WEIGHT: 21.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-ref.nr. 00545 designation of the system of cnc lathe with short rod loader manufacturer haas model sl 10 series year 2009 operating hours shifts
spindle run time approx. 6900 h standard equipment haas cnc control visual quick code (dialog programming)
programming support through g - / m-commands manual werkzeugvermersseinrichtung coolant system (approx. 4 bar pressure)
digital servo spindle drive
brushless ac servo-motors
electronic temperature compensation system
sysnchronisietes threaded drill / cut complete hollow clamping device incl. chuck
spiral chip conveyors (discharge chute to the right)
spindle orientation +-0.1 degrees 15 ' lcd farbbildschilm usb - rs 232 interface
user macro v
1mb program memory; 5 free m functions
automatic lubrication system, oil separator
tool time monitoring
revolver in bolt on vdi 12 stations o. wzg halter specifications umlaufdurchm. machine bed 413 mm
umlaufdurchm. over bed slide 203 mm
rotary chuck sizes 165 mm / * 210 mm
bar passage 44 mm / * 50 mm
max rotation ã? top size 279 mm / 419 mm
maximum speed of main spindle 6000 / * 4000 min-1
torque 102 nm to 650 min-1
torque b series 209 nm to 650 min-1 maximum main spindle drive power 11, 2kw / * 14.9 kw
spindle bore 59 mm / 76 mm
hole in the train pipe 46 mm / * 52 mm
traverse paths x axis / z axis 159 mm / 356 mm
rapid traverse "x z" 30 m / min
revolver / stations vdi 30/12 (6 x drill, outdoor deer)
revolver switching time station - station 1 sec
positioning accuracy â±0. 0051
repetition accuracy â±0. 0025
machine weight 2495 kg incl. bar loader deadline and tailstock free from kw 16/17 
 REF.NR. 00545 DESIGNATION OF THE SYSTEM OF CNC LATHE WITH SHORT ROD LOADER MANUFACTURER HAAS MODEL SL 10 SERIES YEAR 2009 OPERATING HOURS SHIFTS SPINDLE RUN TIME APPROX. 6900 H STANDARD EQUIPMENT HAAS CNC CONTROL VISUAL QUICK CODE (DIALOG PROGRAMMING) PROGRAMMING SUPPORT THROUGH G - / M-COMMANDS MANUAL WERKZEUGVERMERSSEINRICHTUNG COOLANT SYSTEM (APPROX. 4 BAR PRESSURE) DIGITAL SERVO SPINDLE DRIVE BRUSHLESS AC SERVO-MOTORS ELECTRONIC TEMPERATURE COMPENSATION SYSTEM SYSNCHRONISIETES THREADED DRILL / CUT COMPLETE HOLLOW CLAMPING DEVICE INCL. CHUCK SPIRAL CHIP CONVEYORS (DISCHARGE CHUTE TO THE RIGHT) SPINDLE ORIENTATION +-0.1 DEGREES 15 ' LCD FARBBILDSCHILM USB - RS 232 INTERFACE USER MACRO V 1MB PROGRAM MEMORY; 5 FREE M FUNCTIONS AUTOMATIC LUBRICATION SYSTEM, OIL SEPARATOR TOOL TIME MONITORING REVOLVER IN BOLT ON VDI 12 STATIONS O. WZG HALTER SPECIFICATIONS UMLAUFDURCHM. MACHINE BED 413 MM UMLAUFDURCHM. OVER BED SLIDE 203 MM ROTARY CHUCK SIZES 165 MM / * 210 MM BAR PASSAGE 44 MM / * 50 MM MAX ROTATION &ATILDE;? TOP SIZE 279 MM / 419 MM MAXIMUM SPEED OF MAIN SPINDLE 6000 / * 4000 MIN-1 TORQUE 102 NM TO 650 MIN-1 TORQUE B SERIES 209 NM TO 650 MIN-1 MAXIMUM MAIN SPINDLE DRIVE POWER 11, 2KW / * 14.9 KW SPINDLE BORE 59 MM / 76 MM HOLE IN THE TRAIN PIPE 46 MM / * 52 MM TRAVERSE PATHS X AXIS / Z AXIS 159 MM / 356 MM RAPID TRAVERSE "X Z" 30 M / MIN REVOLVER / STATIONS VDI 30/12 (6 X DRILL, OUTDOOR DEER) REVOLVER SWITCHING TIME STATION - STATION 1 SEC POSITIONING ACCURACY &ACIRC;&PLUSMN;0. 0051 REPETITION ACCURACY &ACIRC;&PLUSMN;0. 0025 MACHINE WEIGHT 2495 KG INCL. BAR LOADER DEADLINE AND TAILSTOCK FREE FROM KW 16/17
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Precio: 31.990 €
Ubicación: Land-: 2.550 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 2.150 mm<br/>: 350 mm<br/>: 160 mm<br/>: 104 mm<br/>: 813 mm<br/>: 250 mm<br/>: 620 mm<br/>: 100 lt<br/>: 3.750 mm<br/>: 1.100 mm<br/>: 2.350 mm<br/>: 4.000 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>manual, centralized adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>(sample photo shows mod. pbf 30200)<br/><br/><br/>option:<br/><br/><br/>   cnc controlled crowning table ? 2.760,-   cnc controlled r-axis ? 5.040,-   <br/><br/><br/>we have more than 600 references!<br/><br/>bending length: 2.550 mm<br/>bending force: 60 to<br/>axis: 3 (y1, y2, x)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: manuell, zentral verstellbar<br/>back gauge: cnc gesteuert (x-achse)<br/>motor power: 7,5 kw<br/>distance between columns: 2.150 mm<br/>daylight: 350 mm<br/>stroke: 160 mm<br/>table width: 104 mm<br/>table height: 813 mm<br/>throat depth: 250 mm<br/>travel of back gauge (x): 620 mm<br/>oiltank: 100 lt<br/>length: 3.750 mm<br/>width: 1.100 mm<br/>height: 2.350 mm<br/>weight: 4.000 kg<br/><br/><br/><br/> : 2.550 MM
: 60 TO
: 7,5 KW
: 2.150 MM
: 350 MM
: 160 MM
: 104 MM
: 813 MM
: 250 MM
: 620 MM
: 100 LT
: 3.750 MM
: 1.100 MM
: 2.350 MM
: 4.000 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
MANUAL, CENTRALIZED ADJUSTABLE CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. PBF 30200)


OPTION:


CNC CONTROLLED CROWNING TABLE ? 2.760,- CNC CONTROLLED R-AXIS ? 5.040,-


WE HAVE MORE THAN 600 REFERENCES!

BENDING LENGTH: 2.550 MM
BENDING FORCE: 60 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MANUELL, ZENTRAL VERSTELLBAR
BACK GAUGE: CNC GESTEUERT (X-ACHSE)
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 2.150 MM
DAYLIGHT: 350 MM
STROKE: 160 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 813 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 620 MM
OILTANK: 100 LT
LENGTH: 3.750 MM
WIDTH: 1.100 MM
HEIGHT: 2.350 MM
WEIGHT: 4.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc multi-tasking lathe
nakamura super ntx-s
reference no.: 18038
mfg. year 2007
s/no. v300901
fanuc 16i-tb
luckbei-dialog system supercap
maximum turning diameter
-upper turret 390 mm
-lower turret 300 mm
maximum turning length 1,100 mm
max cash working capacity 65 mm
milling spindle ac 18.5/11 kw
milling spindle maximum speed 12,000 rpm
capto c6
servo controlled b-axis, 230â°
y-axis 160 mm
atc with 40 tools
main and sub spindle ac 22/18.5 kw
main and sub spindle maximum speed 4.500 rpm
12/24-station turret, all stations for driven tools
maximum speed of driven tools 3,600 rpm
2 off. 3-jawchuck 210 mm, schunk
coolant tank 250 liters
high pressure pumps
swarf conveyor
1 set of toolholders for lower turret
-static 9, 3-driven
weight 19,000 kg
ce-mark CNC MULTI-TASKING LATHE NAKAMURA SUPER NTX-S REFERENCE NO.: 18038 MFG. YEAR 2007 S/NO. V300901 FANUC 16I-TB LUCKBEI-DIALOG SYSTEM SUPERCAP MAXIMUM TURNING DIAMETER -UPPER TURRET 390 MM -LOWER TURRET 300 MM MAXIMUM TURNING LENGTH 1,100 MM MAX CASH WORKING CAPACITY 65 MM MILLING SPINDLE AC 18.5/11 KW MILLING SPINDLE MAXIMUM SPEED 12,000 RPM CAPTO C6 SERVO CONTROLLED B-AXIS, 230&ACIRC;&DEG; Y-AXIS 160 MM ATC WITH 40 TOOLS MAIN AND SUB SPINDLE AC 22/18.5 KW MAIN AND SUB SPINDLE MAXIMUM SPEED 4.500 RPM 12/24-STATION TURRET, ALL STATIONS FOR DRIVEN TOOLS MAXIMUM SPEED OF DRIVEN TOOLS 3,600 RPM 2 OFF. 3-JAWCHUCK 210 MM, SCHUNK COOLANT TANK 250 LITERS HIGH PRESSURE PUMPS SWARF CONVEYOR 1 SET OF TOOLHOLDERS FOR LOWER TURRET -STATIC 9, 3-DRIVEN WEIGHT 19,000 KG CE-MARK
Vendedor: TÖRNER CNC Maschinen
Año de construcción: usado
Precio: 54.110 €
Ubicación: Land-: 3.050 mm<br/>: 220 to<br/>: 2.600 mm<br/>: 530 mm<br/>: 265 mm<br/>: 410 mm<br/>: 22 kw<br/>: 4.250 mm<br/>: 1.770 mm<br/>: 2.900 mm<br/>: 12.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 220 to <br/>distance between columns: 2.600 mm <br/>daylight: 530 mm <br/>stroke: 265 mm <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 / x axes<br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 22 kw <br/>length: 4.250 mm <br/>width: 1.770 mm <br/>height: 2.900 mm <br/>weight: 12.500 kg<br/><br/><br/><br/> : 3.050 MM
: 220 TO
: 2.600 MM
: 530 MM
: 265 MM
: 410 MM
: 22 KW
: 4.250 MM
: 1.770 MM
: 2.900 MM
: 12.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 220 TO
DISTANCE BETWEEN COLUMNS: 2.600 MM
DAYLIGHT: 530 MM
STROKE: 265 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 22 KW
LENGTH: 4.250 MM
WIDTH: 1.770 MM
HEIGHT: 2.900 MM
WEIGHT: 12.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-manufacturer: lid vertical milling machine with angle table
type: fp 4 at
year of construction: 1990

technical data
td7xpxmj
traverse paths: x axis 560 mm
y-axis 500 mm
z axis 450 mm
speed: 40-4,000 rpm
msufak

angle table: b = 530 mm, l = 900 mm
permissible load: 450 kg

tool changers: 20 places
tool holder: sk 40

control: cover dialog 11
grundig electronic

machine weight: 2.970 kg

floor space requirements: 4.400 mm l =, b = 4.200 mm, h = 2000 mm
documentation: schematic incl. 2 x cd of the machine data
 MANUFACTURER: LID VERTICAL MILLING MACHINE WITH ANGLE TABLE TYPE: FP 4 AT YEAR OF CONSTRUCTION: 1990 TECHNICAL DATA TD7XPXMJ TRAVERSE PATHS: X AXIS 560 MM Y-AXIS 500 MM Z AXIS 450 MM SPEED: 40-4,000 RPM MSUFAK ANGLE TABLE: B = 530 MM, L = 900 MM PERMISSIBLE LOAD: 450 KG TOOL CHANGERS: 20 PLACES TOOL HOLDER: SK 40 CONTROL: COVER DIALOG 11 GRUNDIG ELECTRONIC MACHINE WEIGHT: 2.970 KG FLOOR SPACE REQUIREMENTS: 4.400 MM L =, B = 4.200 MM, H = 2000 MM DOCUMENTATION: SCHEMATIC INCL. 2 X CD OF THE MACHINE DATA
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 84.790 €
Ubicación: Land-: 4.050 mm<br/>: 320 to<br/>: 37 kw<br/>: 3.600 mm<br/>: 365 mm<br/>: 630 mm<br/>: 300 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 5.300 mm<br/>: 1.910 mm<br/>: 3.230 mm<br/>: 21.000 kg<br/>4 axes (y1, y2, x, and r axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>(photos of machine with removed covers ready to be shipped, sample photos of smaler machine with covers)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis included   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 640 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm<br/>bending force: 320 to <br/>axis: 4 (y1, y2, x, r)<br/>upper tool: 75° goosed, sectioned<br/>lower tool: 4-v die 16, 22, 35 and 50 mm <br/>anti deflection: cnc conrolled<br/>back gauge: cnc conrolled<br/>motor power: 37 kw<br/>distance between columns: 3.600 mm<br/>stroke: 365 mm<br/>daylight: 630 mm<br/>table width: 300 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 5.300 mm<br/>width: 1.910 mm<br/>height: 3.230 mm<br/>weight: 21.000 kg<br/><br/><br/><br/> : 4.050 MM
: 320 TO
: 37 KW
: 3.600 MM
: 365 MM
: 630 MM
: 300 MM
: 900 MM
: 410 MM
: 650 MM
: 5.300 MM
: 1.910 MM
: 3.230 MM
: 21.000 KG
4 AXES (Y1, Y2, X, AND R AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

(PHOTOS OF MACHINE WITH REMOVED COVERS READY TO BE SHIPPED, SAMPLE PHOTOS OF SMALER MACHINE WITH COVERS)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS INCLUDED QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 640 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 320 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: 75° GOOSED, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: CNC CONROLLED
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 37 KW
DISTANCE BETWEEN COLUMNS: 3.600 MM
STROKE: 365 MM
DAYLIGHT: 630 MM
TABLE WIDTH: 300 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 5.300 MM
WIDTH: 1.910 MM
HEIGHT: 3.230 MM
WEIGHT: 21.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-controls: grundig dialog 4.  CONTROLS: GRUNDIG DIALOG 4.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 60.070 €
Ubicación: Land-: 3.050 mm<br/>: 220 to<br/>: 2.600 mm<br/>: 530 mm<br/>: 265 mm<br/>: 410 mm<br/>: 22 kw<br/>: 4.250 mm<br/>: 1.770 mm<br/>: 2.900 mm<br/>: 12.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 220 to <br/>distance between columns: 2.600 mm <br/>daylight: 530 mm <br/>stroke: 265 mm <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 / x axes<br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 22 kw <br/>length: 4.250 mm <br/>width: 1.770 mm <br/>height: 2.900 mm <br/>weight: 12.500 kg<br/><br/><br/><br/> : 3.050 MM
: 220 TO
: 2.600 MM
: 530 MM
: 265 MM
: 410 MM
: 22 KW
: 4.250 MM
: 1.770 MM
: 2.900 MM
: 12.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 220 TO
DISTANCE BETWEEN COLUMNS: 2.600 MM
DAYLIGHT: 530 MM
STROKE: 265 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 22 KW
LENGTH: 4.250 MM
WIDTH: 1.770 MM
HEIGHT: 2.900 MM
WEIGHT: 12.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-control dialog 112
travel x / y / z: 700/550/500 mm
spindle speed 15000 1/min
tool magazine for 30 tools, sk 40
max. table load 800 kg
chip conveyor  CONTROL DIALOG 112 TRAVEL X / Y / Z: 700/550/500 MM SPINDLE SPEED 15000 1/MIN TOOL MAGAZINE FOR 30 TOOLS, SK 40 MAX. TABLE LOAD 800 KG CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Precio: 110.300 €
Ubicación: Land-: 6.050 mm<br/>: 320 to<br/>: 5.100 mm<br/>: 630 mm<br/>: 365 mm<br/>: 410 mm<br/>: 37 kw<br/>: 7.500 mm<br/>: 1.910 mm<br/>: 3.450 mm<br/>: 28.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.790,--   cnc controlled r-axis ? 7.190,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 6.050 mm<br/>bending force: 320 to <br/>distance between columns: 5.100 mm  <br/>daylight: 630 mm <br/>stroke: 365 mm  <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 / x axes <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: yes, cnc controlled<br/>motor power: 37 kw <br/>length: 7.500 mm <br/>width: 1.910 mm <br/>height: 3.450 mm <br/>weight: 28.500 kg<br/><br/><br/><br/> : 6.050 MM
: 320 TO
: 5.100 MM
: 630 MM
: 365 MM
: 410 MM
: 37 KW
: 7.500 MM
: 1.910 MM
: 3.450 MM
: 28.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.790,-- CNC CONTROLLED R-AXIS ? 7.190,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 6.050 MM
BENDING FORCE: 320 TO
DISTANCE BETWEEN COLUMNS: 5.100 MM
DAYLIGHT: 630 MM
STROKE: 365 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: YES, CNC CONTROLLED
MOTOR POWER: 37 KW
LENGTH: 7.500 MM
WIDTH: 1.910 MM
HEIGHT: 3.450 MM
WEIGHT: 28.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 8.319 €
Ubicación: Land-technical data:

brand: cover

type: fp 3

control: dialog 11

-traverse path x approx. 400 mm, y 400 mm, z 500 mm

-solid angle table

-speed: up to 5000 rpm

-milling head swiveling

-sleeve: sk 40

-weight ca: 2000 kg

-space ca: t: 2.80 m, b: 2.20 m, h: 2.0 m TECHNICAL DATA: BRAND: COVER TYPE: FP 3 CONTROL: DIALOG 11 -TRAVERSE PATH X APPROX. 400 MM, Y 400 MM, Z 500 MM -SOLID ANGLE TABLE -SPEED: UP TO 5000 RPM -MILLING HEAD SWIVELING -SLEEVE: SK 40 -WEIGHT CA: 2000 KG -SPACE CA: T: 2.80 M, B: 2.20 M, H: 2.0 M
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: 45.730 €
Ubicación: Land-: 3.050 mm<br/>: 200 to<br/>: 15 kw<br/>: 2.550 mm<br/>: 445 mm<br/>: 210 mm<br/>: 104 mm<br/>: 858 mm<br/>: 250 mm<br/>: 4.500 mm<br/>: 1.390 mm<br/>: 2.520 mm<br/>: 150 lt<br/>: 7.950 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>manual, centralized adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>option:<br/><br/><br/>   cnc controlled crowning table ? 2.760,-   cnc controlled r-axis ? 5.550,-   <br/><br/><br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/> <br/><br/>bending length: 3.050 mm <br/>bending force: 200 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: manual, central adjustable <br/>back gauge: cnc controlled (x-axis) <br/>motor power: 15 kw <br/>distance between columns: 2.550 mm <br/>daylight: 445 mm <br/>stroke: 210 mm<br/>table width: 104 mm <br/>table height: 858 mm <br/>throat depth: 250 mm <br/>travel of back gauge (x): 620 mm <br/>oiltank: 150 lt <br/>length: 4.500 mm <br/>width: 1.390 mm <br/>height: 2.520 mm <br/>weight: 7.950 kg<br/><br/><br/><br/> : 3.050 MM
: 200 TO
: 15 KW
: 2.550 MM
: 445 MM
: 210 MM
: 104 MM
: 858 MM
: 250 MM
: 4.500 MM
: 1.390 MM
: 2.520 MM
: 150 LT
: 7.950 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
MANUAL, CENTRALIZED ADJUSTABLE CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

OPTION:


CNC CONTROLLED CROWNING TABLE ? 2.760,- CNC CONTROLLED R-AXIS ? 5.550,-



WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)


BENDING LENGTH: 3.050 MM
BENDING FORCE: 200 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MANUAL, CENTRAL ADJUSTABLE
BACK GAUGE: CNC CONTROLLED (X-AXIS)
MOTOR POWER: 15 KW
DISTANCE BETWEEN COLUMNS: 2.550 MM
DAYLIGHT: 445 MM
STROKE: 210 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 858 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 620 MM
OILTANK: 150 LT
LENGTH: 4.500 MM
WIDTH: 1.390 MM
HEIGHT: 2.520 MM
WEIGHT: 7.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc milling machine lid fp5nc dialog 11
xyz: 800 x 550 x 500 mm  CNC MILLING MACHINE LID FP5NC DIALOG 11 XYZ: 800 X 550 X 500 MM
Vendedor: Metalmak GmbH
Año de construcción: usado
Precio: 137.100 €
Ubicación: Land-: 6.050 mm<br/>: 400 to<br/>: 5.100 mm<br/>: 630 mm<br/>: 365 mm<br/>: 510 mm<br/>: 37 kw<br/>: 7.500 mm<br/>: 2.110 mm<br/>: 3.710 mm<br/>: 35.750 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 7.190,--   hydraulic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 6.050 mm<br/>bending force: 400 to<br/>distance between columns: 5.100 mm<br/>daylight: 630 mm<br/>stroke: 365 mm<br/>gap in sideframe: 510 mm<br/>axis:	y1 / y2 / x axes<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection:	yes, motorized system controlled by cnc<br/>back gauge: yes, cnc controlled<br/>motor power: 37 kw<br/>length: 7.500 mm<br/>width: 2.110 mm<br/>height: 3.710 mm<br/>weight: 35.750 kg<br/><br/><br/><br/> : 6.050 MM
: 400 TO
: 5.100 MM
: 630 MM
: 365 MM
: 510 MM
: 37 KW
: 7.500 MM
: 2.110 MM
: 3.710 MM
: 35.750 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 7.190,-- HYDRAULIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 6.050 MM
BENDING FORCE: 400 TO
DISTANCE BETWEEN COLUMNS: 5.100 MM
DAYLIGHT: 630 MM
STROKE: 365 MM
GAP IN SIDEFRAME: 510 MM
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: YES, CNC CONTROLLED
MOTOR POWER: 37 KW
LENGTH: 7.500 MM
WIDTH: 2.110 MM
HEIGHT: 3.710 MM
WEIGHT: 35.750 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-workspace in x: 1000 mm
workspace in y: 800 mm
workspace in z: 500 mm
table size: 1250 x 800 mm
speed range: 0-15000 rpm
spindle taper: iso 40
total power: 15 kw / 400 v
machine weight: 9100 kg

equipment / accessories:

cnc railway control dialog 112
30 x tool changer
spindle cooling
chip conveyor
electr. handwheel
coolant system

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the baz in advance in our work.
 WORKSPACE IN X: 1000 MM WORKSPACE IN Y: 800 MM WORKSPACE IN Z: 500 MM TABLE SIZE: 1250 X 800 MM SPEED RANGE: 0-15000 RPM SPINDLE TAPER: ISO 40 TOTAL POWER: 15 KW / 400 V MACHINE WEIGHT: 9100 KG EQUIPMENT / ACCESSORIES: CNC RAILWAY CONTROL DIALOG 112 30 X TOOL CHANGER SPINDLE COOLING CHIP CONVEYOR ELECTR. HANDWHEEL COOLANT SYSTEM ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE BAZ IN ADVANCE IN OUR WORK.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 48.490 €
Ubicación: Land-: 3.050 mm<br/>: 200 to<br/>: 15 kw<br/>: 2.550 mm<br/>: 445 mm<br/>: 210 mm<br/>: 104 mm<br/>: 858 mm<br/>: 250 mm<br/>: 4.500 mm<br/>: 1.390 mm<br/>: 2.520 mm<br/>: 150 lt<br/>: 7.950 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>anti deflection motorized, adjustable by cnc <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>we have more than 600 references!<br/> <br/><br/>bending length: 3.050 mm <br/>bending force: 200 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: motorized system controlled by cnc<br/>back gauge: cnc controlled (x-axis) <br/>motor power: 15 kw <br/>distance between columns: 2.550 mm <br/>daylight: 445 mm <br/>stroke: 210 mm<br/>table width: 104 mm <br/>table height: 858 mm <br/>throat depth: 250 mm <br/>travel of back gauge (x): 620 mm <br/>oiltank: 150 lt <br/>length: 4.500 mm <br/>width: 1.390 mm <br/>height: 2.520 mm <br/>weight: 7.950 kg<br/><br/><br/><br/> : 3.050 MM
: 200 TO
: 15 KW
: 2.550 MM
: 445 MM
: 210 MM
: 104 MM
: 858 MM
: 250 MM
: 4.500 MM
: 1.390 MM
: 2.520 MM
: 150 LT
: 7.950 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
ANTI DEFLECTION MOTORIZED, ADJUSTABLE BY CNC
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 600 REFERENCES!


BENDING LENGTH: 3.050 MM
BENDING FORCE: 200 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED (X-AXIS)
MOTOR POWER: 15 KW
DISTANCE BETWEEN COLUMNS: 2.550 MM
DAYLIGHT: 445 MM
STROKE: 210 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 858 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 620 MM
OILTANK: 150 LT
LENGTH: 4.500 MM
WIDTH: 1.390 MM
HEIGHT: 2.520 MM
WEIGHT: 7.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-type of machine: cnc vertical machining center,.
manufacturer: dmg,.
model: dmc 100 v,.
control: dialog 112,.
year of construction: 1996,.
condition: very good,.
type of offer: used machine,
  .,.	
technical data:.
table: 1250 x 800 mm,.
paths:,.
x = 1000 mm,. 
y = 800 mm,.
z = 500 mm,.
spindle speed: 0-15000 rpm,.
spindle drive: 15,0 kw,.
spindle taper: iso 40,.
comment:,. 
30-fold tool changer,.
spindle cooling,. 
chip conveyor,.
coolant system,.
weight: 9100 kg,.
   .,.
the machine is in a very good shape and ready for operation. it can be visited and demonstrated at our location. ,.
  .,.
we will be pleased if you take an interest in our offer..,.
  TYPE OF MACHINE: CNC VERTICAL MACHINING CENTER,. MANUFACTURER: DMG,. MODEL: DMC 100 V,. CONTROL: DIALOG 112,. YEAR OF CONSTRUCTION: 1996,. CONDITION: VERY GOOD,. TYPE OF OFFER: USED MACHINE, .,. TECHNICAL DATA:. TABLE: 1250 X 800 MM,. PATHS:,. X = 1000 MM,. Y = 800 MM,. Z = 500 MM,. SPINDLE SPEED: 0-15000 RPM,. SPINDLE DRIVE: 15,0 KW,. SPINDLE TAPER: ISO 40,. COMMENT:,. 30-FOLD TOOL CHANGER,. SPINDLE COOLING,. CHIP CONVEYOR,. COOLANT SYSTEM,. WEIGHT: 9100 KG,. .,. THE MACHINE IS IN A VERY GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION. ,. .,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER..,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 38.590 €
Ubicación: Land-: 2.550 mm<br/>: 100 to<br/>: 11 kw<br/>: 2.200 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 3.800 mm<br/>: 1.670 mm<br/>: 2.750 mm<br/>: 7.400 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.550,--   quick connecting terminals for the upper tool ? 330,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 2.550 mm<br/>bending force: 100 to<br/>axis: 3 (y1, y2, x)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 11 kw<br/>distance between columns: 	2.200 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 3.800 mm<br/>width: 1.670 mm<br/>height: 2.750 mm<br/>weight: 7.400 kg<br/><br/><br/><br/> : 2.550 MM
: 100 TO
: 11 KW
: 2.200 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 3.800 MM
: 1.670 MM
: 2.750 MM
: 7.400 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.550,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 330,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 2.550 MM
BENDING FORCE: 100 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 11 KW
DISTANCE BETWEEN COLUMNS: 2.200 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 3.800 MM
WIDTH: 1.670 MM
HEIGHT: 2.750 MM
WEIGHT: 7.400 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc milling machine cover fp 4 with cnc railway control dialog 11
nivxt
year: 1989
technical data:
-travel distances approx.: x: 560 mm, y: 500 mm, spindle nose to table: 500 mm
-clamping surface (table) approx.: 900 x 550 mm
-solid angle table
-speed approx.: 5000 rpm
-control: dialog 11
-milling head swiveling
-sleeve: sk 40
-approximate weight: 2,600 kg
-transport dimensions approx.: l: 3.0 m, b: 2.0 m, h: 2.0 m

accessories: external coolant supply, electr. handwheel, work light, splash guard cabin, feet, documentation
 CNC MILLING MACHINE COVER FP 4 WITH CNC RAILWAY CONTROL DIALOG 11 NIVXT YEAR: 1989 TECHNICAL DATA: -TRAVEL DISTANCES APPROX.: X: 560 MM, Y: 500 MM, SPINDLE NOSE TO TABLE: 500 MM -CLAMPING SURFACE (TABLE) APPROX.: 900 X 550 MM -SOLID ANGLE TABLE -SPEED APPROX.: 5000 RPM -CONTROL: DIALOG 11 -MILLING HEAD SWIVELING -SLEEVE: SK 40 -APPROXIMATE WEIGHT: 2,600 KG -TRANSPORT DIMENSIONS APPROX.: L: 3.0 M, B: 2.0 M, H: 2.0 M ACCESSORIES: EXTERNAL COOLANT SUPPLY, ELECTR. HANDWHEEL, WORK LIGHT, SPLASH GUARD CABIN, FEET, DOCUMENTATION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 50.710 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>3 axes (y1, y2, x) <br/>cnc dt-15<br/>- 2d grafic display 15",<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis: 3 (y1, y2, x)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 2.600 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
3 AXES (Y1, Y2, X) 
CNC DT-15
- 2D GRAFIC DISPLAY 15",
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-x: 1170 mm
y: 500 mm
z: 370 mm
table size: 1300 x 850 mm
speed range: 31-3150 rpm
spindle holder: sk 40
control: dialog 4
total power: 4 kw
machine weight: 4000 kg
dimensions (w x d x h): 4.1 x 3.8 x 2.1 m

condition: good, ready for use 
   X: 1170 MM Y: 500 MM Z: 370 MM TABLE SIZE: 1300 X 850 MM SPEED RANGE: 31-3150 RPM SPINDLE HOLDER: SK 40 CONTROL: DIALOG 4 TOTAL POWER: 4 KW MACHINE WEIGHT: 4000 KG DIMENSIONS (W X D X H): 4.1 X 3.8 X 2.1 M CONDITION: GOOD, READY FOR USE
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: 103.710 €
Ubicación: Land-: 4.050 mm<br/>: 400 to<br/>: 630 mm<br/>: 365 mm<br/>: 510 mm<br/>: 37 kw<br/>: 5.750 mm<br/>: 2.110 mm<br/>: 3.540 mm<br/>: 26.750 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm<br/>bending force: 400 to<br/>daylight opening: 630 mm<br/>stroke: 365 mm<br/>gap in sideframes: 510 mm<br/>axis:	y1 / y2 / x axes<br/>upper tool:	75° goose neck, sectioned<br/>lower tool:	4-v die 16, 22, 35 and 50 mm<br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 37 kw<br/>length: 5.750 mm<br/>width: 2.110 mm<br/>höhe: 3.540 mm<br/>weight: 26.750 kg<br/><br/><br/><br/> : 4.050 MM
: 400 TO
: 630 MM
: 365 MM
: 510 MM
: 37 KW
: 5.750 MM
: 2.110 MM
: 3.540 MM
: 26.750 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 400 TO
DAYLIGHT OPENING: 630 MM
STROKE: 365 MM
GAP IN SIDEFRAMES: 510 MM
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 37 KW
LENGTH: 5.750 MM
WIDTH: 2.110 MM
HöHE: 3.540 MM
WEIGHT: 26.750 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview
brand: deckel
model: fp5cc
application type: milling 
machine type: milling machines 
availability: immediately 
production year: 1989 
location: belgium
origin country: the netherlands 
production hours: 18200

general data
measurements width: 3000 mm 
measurements depth: 2700 mm 
measurements height: 1650 mm 
machine weight: 4500 kg

control unit
brand: grundig
model: dialog 11
cnc main language: french 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 7000 rpm

movement
x-axis movement: 800 mm 
y-axis movement: 600 mm 
z-axis movement: 550 mm

workpiece
workpiece drm: 80 mm 
workpiece weight: 600 kg

table
outer length: 1000 mm 
outer width: 470 mm

tools
max weight: 12 kg
max tool diameter: 100/150 mm 
max tool length: 300 mm

media
main electronic connection: 380 v 
power consumption: 33 kva

additional equipment
1: 2xtools

see full technical specifications of this machine at:
abc://bit.ly/2jclpup OVERVIEW BRAND: DECKEL MODEL: FP5CC APPLICATION TYPE: MILLING MACHINE TYPE: MILLING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1989 LOCATION: BELGIUM ORIGIN COUNTRY: THE NETHERLANDS PRODUCTION HOURS: 18200 GENERAL DATA MEASUREMENTS WIDTH: 3000 MM MEASUREMENTS DEPTH: 2700 MM MEASUREMENTS HEIGHT: 1650 MM MACHINE WEIGHT: 4500 KG CONTROL UNIT BRAND: GRUNDIG MODEL: DIALOG 11 CNC MAIN LANGUAGE: FRENCH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 7000 RPM MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 600 MM Z-AXIS MOVEMENT: 550 MM WORKPIECE WORKPIECE DRM: 80 MM WORKPIECE WEIGHT: 600 KG TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 470 MM TOOLS MAX WEIGHT: 12 KG MAX TOOL DIAMETER: 100/150 MM MAX TOOL LENGTH: 300 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V POWER CONSUMPTION: 33 KVA ADDITIONAL EQUIPMENT 1: 2XTOOLS SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2JCLPUP
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 67.110 €
Ubicación: Land-: 3.050 mm<br/>: 320 to<br/>: 37 kw<br/>: 4.300 mm<br/>: 1.820 mm<br/>: 3.230 mm<br/>: 17.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 320 to <br/>axis: y1 / y2 / x axes <br/>upper tool: 75° goose neck, sectioned <br/>lower tool:  4-v die 16,22,35 und 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc conrolled<br/>motor power: 37 kw <br/>length: 4.300 mm <br/>width: 1.820 mm <br/>height: 3.230 mm <br/>weight: 17.500 kg<br/><br/><br/><br/> : 3.050 MM
: 320 TO
: 37 KW
: 4.300 MM
: 1.820 MM
: 3.230 MM
: 17.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!







BENDING LENGTH: 3.050 MM
BENDING FORCE: 320 TO
AXIS: Y1 / Y2 / X AXES
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16,22,35 UND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 37 KW
LENGTH: 4.300 MM
WIDTH: 1.820 MM
HEIGHT: 3.230 MM
WEIGHT: 17.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cnc track control: dialog 4
traverse paths: x = 710, y = 600, z = 500 mm.
sindelaufnahme: sk 40 with hydr. tool clamping.
spindle speed: 18-6300 rpm.
incl. angle table clamping surface: 550 x 1000 mm,
universal swivel head with drill spindle, hub: 80 mm,.
horizontal milling spindle, electr. handwheel,
coolant system and documentation, weight: approx. 4400 kg.
good working condition.
the machine can be seen under power and is immediately available.
please check my other offers. CNC TRACK CONTROL: DIALOG 4 TRAVERSE PATHS: X = 710, Y = 600, Z = 500 MM. SINDELAUFNAHME: SK 40 WITH HYDR. TOOL CLAMPING. SPINDLE SPEED: 18-6300 RPM. INCL. ANGLE TABLE CLAMPING SURFACE: 550 X 1000 MM, UNIVERSAL SWIVEL HEAD WITH DRILL SPINDLE, HUB: 80 MM,. HORIZONTAL MILLING SPINDLE, ELECTR. HANDWHEEL, COOLANT SYSTEM AND DOCUMENTATION, WEIGHT: APPROX. 4400 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE. PLEASE CHECK MY OTHER OFFERS.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: 44.610 €
Ubicación: Land-: 3.050 mm<br/>: 100 to<br/>: 530 mm<br/>: 265 mm<br/>: 410 mm<br/>: 11 kw<br/>: 4.200 mm<br/>: 1.670 mm<br/>: 2.750 mm<br/>: 9.250 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 100 to <br/>daylight opening: 530 mm <br/>stroke: 265 mm <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 and x axes <br/>upper tool: 75° gooseneck, sectioned <br/>lower tool: 4-v die 16, 22, 35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc <br/>back gauge: cnc controlled, driven by servo motors<br/>motor power: 11 kw <br/>length: 4.200 mm <br/>width: 1.670 mm <br/>height: 2.750 mm<br/>weight: 9.250 kg<br/><br/><br/><br/> : 3.050 MM
: 100 TO
: 530 MM
: 265 MM
: 410 MM
: 11 KW
: 4.200 MM
: 1.670 MM
: 2.750 MM
: 9.250 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 100 TO
DAYLIGHT OPENING: 530 MM
STROKE: 265 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 AND X AXES
UPPER TOOL: 75° GOOSENECK, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED, DRIVEN BY SERVO MOTORS
MOTOR POWER: 11 KW
LENGTH: 4.200 MM
WIDTH: 1.670 MM
HEIGHT: 2.750 MM
WEIGHT: 9.250 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-control: dialog 4
traverse paths: x = 710, y = 600, z = 500 mm.
spindle retainer: sk 40 with hydr. voltage.
spindle speed: 18-6300 rpm.
incl. angle table clamping surface: 550 x 1000 mm,
horizontal frã¤sspndel, coolant system,
electr. handwheel, full cabin
and documentation.  weight: approx. 4400 kg.
good working condition.
the machine can be seen under power and is immediately available.
please check my other offers. CONTROL: DIALOG 4 TRAVERSE PATHS: X = 710, Y = 600, Z = 500 MM. SPINDLE RETAINER: SK 40 WITH HYDR. VOLTAGE. SPINDLE SPEED: 18-6300 RPM. INCL. ANGLE TABLE CLAMPING SURFACE: 550 X 1000 MM, HORIZONTAL FR&ATILDE;&CURREN;SSPNDEL, COOLANT SYSTEM, ELECTR. HANDWHEEL, FULL CABIN AND DOCUMENTATION. WEIGHT: APPROX. 4400 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE. PLEASE CHECK MY OTHER OFFERS.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: 39.530 €
Ubicación: Land-: 3.050 mm<br/>: 120 to<br/>: 11 kw<br/>: 2.550 mm<br/>: 375 mm<br/>: 180 mm<br/>: 104 mm<br/>: 878 mm<br/>: 250 mm<br/>: 620 mm<br/>: 150 lt<br/>: 4.200 mm<br/>: 1.230 mm<br/>: 2.400 mm<br/>: 5.900 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>manual, centralized adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>(sample photo shows mod. pbf 30200)<br/><br/>option:<br/>   cnc controlled crowning table ? 2.760,-   cnc controlled r-axis ? 5.550,-   <br/><br/><br/>we have more than 600 references!<br/><br/>bending length: 3.050 mm <br/>bending force: 120 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: manual, central adjustable <br/>back gauge: cnc controlled (x-axis) <br/>motor power: 11 kw <br/>distance between columns: 2.550 mm <br/>daylight: 375 mm <br/>stroke: 180 mm<br/>table width: 104 mm <br/>table height: 878 mm <br/>throat depth: 250 mm <br/>travel of back gauge (x): 620 mm <br/>oiltank: 150 lt <br/>length: 4.200 mm <br/>width: 1.230 mm <br/>height: 2.400 mm <br/>weight: 5.900 kg<br/><br/><br/><br/> : 3.050 MM
: 120 TO
: 11 KW
: 2.550 MM
: 375 MM
: 180 MM
: 104 MM
: 878 MM
: 250 MM
: 620 MM
: 150 LT
: 4.200 MM
: 1.230 MM
: 2.400 MM
: 5.900 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
MANUAL, CENTRALIZED ADJUSTABLE CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. PBF 30200)

OPTION:
CNC CONTROLLED CROWNING TABLE ? 2.760,- CNC CONTROLLED R-AXIS ? 5.550,-


WE HAVE MORE THAN 600 REFERENCES!

BENDING LENGTH: 3.050 MM
BENDING FORCE: 120 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MANUAL, CENTRAL ADJUSTABLE
BACK GAUGE: CNC CONTROLLED (X-AXIS)
MOTOR POWER: 11 KW
DISTANCE BETWEEN COLUMNS: 2.550 MM
DAYLIGHT: 375 MM
STROKE: 180 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 878 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 620 MM
OILTANK: 150 LT
LENGTH: 4.200 MM
WIDTH: 1.230 MM
HEIGHT: 2.400 MM
WEIGHT: 5.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-: 4232 no.1 gebr. universal tool milling machine
fabr. lid maho, fp 3-50 type
bu. 1993 dialogue 12
arb.-ber.: 500 x 400 x 400 mm, power: 7.5/10 kw
 
accessories: rigid table 800 x 480 mm
electronic handwheel
coolant system, machine feet
operating instructions other: speed range 1/min 31.5-5000
iso 40 spindle adaptor
feed range 2-6000 mm / min
rapid 6 m / min

space requirement 2.8 x 2.4 m x 2 m
weight approx. 2.8 to  
 : 4232 NO.1 GEBR. UNIVERSAL TOOL MILLING MACHINE FABR. LID MAHO, FP 3-50 TYPE BU. 1993 DIALOGUE 12 ARB.-BER.: 500 X 400 X 400 MM, POWER: 7.5/10 KW ACCESSORIES: RIGID TABLE 800 X 480 MM ELECTRONIC HANDWHEEL COOLANT SYSTEM, MACHINE FEET OPERATING INSTRUCTIONS OTHER: SPEED RANGE 1/MIN 31.5-5000 ISO 40 SPINDLE ADAPTOR FEED RANGE 2-6000 MM / MIN RAPID 6 M / MIN SPACE REQUIREMENT 2.8 X 2.4 M X 2 M WEIGHT APPROX. 2.8 TO
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Precio: 56.670 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>4 axes (y1, y2, x, r) <br/>cnc dt-15<br/>- 2d grafic display 15",<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis included   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis: 4 (y1, y2, x, r)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 2.600 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
4 AXES (Y1, Y2, X, R) 
CNC DT-15
- 2D GRAFIC DISPLAY 15",
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS INCLUDED QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-: 3660 no.1 gebr. universal tool milling machine fabr. cover, type fp 41 a
bu. 1981 with dialog 11 arb.-ber.: 770 x 370 x 370 mm
power: 2/4 kw accessories: rigid table 1000 x 440 mm
nc rotary table 800 x 600
electronic handwheel
chip tray
coolant system other: spindle iso 40
speed range 25-2500 min-1
feed range 10-2000 mm / min
rapid traverse 4 m / min

space requirement approx. 2 x 2 m x 2 m
weight approx. 2.8 to : 3660 NO.1 GEBR. UNIVERSAL TOOL MILLING MACHINE FABR. COVER, TYPE FP 41 A BU. 1981 WITH DIALOG 11 ARB.-BER.: 770 X 370 X 370 MM POWER: 2/4 KW ACCESSORIES: RIGID TABLE 1000 X 440 MM NC ROTARY TABLE 800 X 600 ELECTRONIC HANDWHEEL CHIP TRAY COOLANT SYSTEM OTHER: SPINDLE ISO 40 SPEED RANGE 25-2500 MIN-1 FEED RANGE 10-2000 MM / MIN RAPID TRAVERSE 4 M / MIN SPACE REQUIREMENT APPROX. 2 X 2 M X 2 M WEIGHT APPROX. 2.8 TO
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Precio: 65.510 €
Ubicación: Land-: 4.050 mm<br/>: 220 to<br/>: 22 kw<br/>: 5.250 mm<br/>: 1.770 mm<br/>: 2.900 mm<br/>: 3.600 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 250 lt<br/>: 14.750 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 220 to<br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: yes, cnc controlled<br/>motor power: 22 kw <br/>length: 5.250 mm <br/>width: 1.770 mm <br/>height: 2.900 mm <br/>distance between columns: 3.600 mm <br/>daylight: 530 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 410 mm <br/>travel of back gauge (x): 650 mm <br/>oiltank: 250 lt <br/>weight: 14.750 kg<br/><br/><br/><br/> : 4.050 MM
: 220 TO
: 22 KW
: 5.250 MM
: 1.770 MM
: 2.900 MM
: 3.600 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 250 LT
: 14.750 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 220 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: YES, CNC CONTROLLED
MOTOR POWER: 22 KW
LENGTH: 5.250 MM
WIDTH: 1.770 MM
HEIGHT: 2.900 MM
DISTANCE BETWEEN COLUMNS: 3.600 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
OILTANK: 250 LT
WEIGHT: 14.750 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)