13 ofertas

Año de construcción: usado
Ubicación: Land-automatic cross cut saw 
dimter opticut
model: s 50
year of construction: 2004

cutting width 300 mm
cutting height 120 mm
saw blade diameter 500 mm
saw motor 5.5 kw
positioning accuracy +/-0.5 mm
speed button up to 60 m / min (adjustable)
task table 6300 mm outlet table 2400 mm
opticom assist control
cut to the chalk line and length input

very good condition.

weight approx. 1000 kg
  AUTOMATIC CROSS CUT SAW DIMTER OPTICUT MODEL: S 50 YEAR OF CONSTRUCTION: 2004 CUTTING WIDTH 300 MM CUTTING HEIGHT 120 MM SAW BLADE DIAMETER 500 MM SAW MOTOR 5.5 KW POSITIONING ACCURACY +/-0.5 MM SPEED BUTTON UP TO 60 M / MIN (ADJUSTABLE) TASK TABLE 6300 MM OUTLET TABLE 2400 MM OPTICOM ASSIST CONTROL CUT TO THE CHALK LINE AND LENGTH INPUT VERY GOOD CONDITION. WEIGHT APPROX. 1000 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: dimter, year: 1999, type: opticut 104l, program: yes, cutting depth mm: 300, working hight mm: 150, positioning accuracy mm: 1,0, feeding speed max m/min: 150, feeding speed continous adjustable: yes, work piece length max mm: 6000, kw output saw motor: 7,5, loading stations: 1, strichcodierung: yes, saw blade diameter mm: 450, optimisation: yes, outfeeding stations: 10, compressed air bar: 6, year :1999 MANUFACTURER: DIMTER, YEAR: 1999, TYPE: OPTICUT 104L, PROGRAM: YES, CUTTING DEPTH MM: 300, WORKING HIGHT MM: 150, POSITIONING ACCURACY MM: 1,0, FEEDING SPEED MAX M/MIN: 150, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORK PIECE LENGTH MAX MM: 6000, KW OUTPUT SAW MOTOR: 7,5, LOADING STATIONS: 1, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 450, OPTIMISATION: YES, OUTFEEDING STATIONS: 10, COMPRESSED AIR BAR: 6, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
-machine in stock
-very good condition
-year of manufacture 1998 rebuilt by weinig in 2017 r
-the machine is equipped with a full optimization

technical parameters:

-length of cutting 500 mm-3000 mm
-cutting width 80 mm – 245 mm
-cutting height 15 mm-80 mm
-the final length 180 mm
-blade diameter 500 mm
-five wyrzuników
– a system of waste collection
-height reception of 2000 mm
-the feed rate to 170 m/min
-main engine 15 kw
-tiltable 5000 mm
-measuring station
-the receiving table 13 000 mm -MACHINE IN STOCK -VERY GOOD CONDITION -YEAR OF MANUFACTURE 1998 REBUILT BY WEINIG IN 2017 R -THE MACHINE IS EQUIPPED WITH A FULL OPTIMIZATION TECHNICAL PARAMETERS: -LENGTH OF CUTTING 500 MM-3000 MM -CUTTING WIDTH 80 MM – 245 MM -CUTTING HEIGHT 15 MM-80 MM -THE FINAL LENGTH 180 MM -BLADE DIAMETER 500 MM -FIVE WYRZUNIKóW – A SYSTEM OF WASTE COLLECTION -HEIGHT RECEPTION OF 2000 MM -THE FEED RATE TO 170 M/MIN -MAIN ENGINE 15 KW -TILTABLE 5000 MM -MEASURING STATION -THE RECEIVING TABLE 13 000 MM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-manufacturer: dimter, year: 2000, type: opticut 704 r, cutting depth mm: 250, working hight mm: 100, wood cross-sections mm: 250x30/100x100, effective length slider mm: 6000, feeding speed continous adjustable: yes, work piece length max mm: 6000, loading stations: yes, strichcodierung: yes, saw blade diameter mm: 550, optimisation: yes, exhaust diameter mm: 21 kw, required space l x w x h mm: l = 6.000, wight approx. kg: 4200, year :2000 MANUFACTURER: DIMTER, YEAR: 2000, TYPE: OPTICUT 704 R, CUTTING DEPTH MM: 250, WORKING HIGHT MM: 100, WOOD CROSS-SECTIONS MM: 250X30/100X100, EFFECTIVE LENGTH SLIDER MM: 6000, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORK PIECE LENGTH MAX MM: 6000, LOADING STATIONS: YES, STRICHCODIERUNG: YES, SAW BLADE DIAMETER MM: 550, OPTIMISATION: YES, EXHAUST DIAMETER MM: 21 KW, REQUIRED SPACE L X W X H MM: L = 6.000, WIGHT APPROX. KG: 4200, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-automatic double mitre cut saw – coffin saw digo dimter
with controll system and drilling units
type: 1113 version cnc 
	
machine length 4000 mm x machine width 2620 mm
work area length max. approx. 2600 mm
working width max. approx. 800 mm
cnc version
pneumatic clamping of the work piece
saw motors each 3 kw = 6 kw
adjustment of wood length 0,7 kw
adjustment of wood thickness 0,7 kw = 1,4 kw 
saw arm moving sidewards 0,18 kw = 0,36 kw
saw motor tilting 0,18 kw = 0,36 kw
motor drilling units 0,36 kw = 2.16 kw 
3 drilling units from bottom each with 2 drills
lift movement and drive of the drilling spindles pneumatic
tool chuck 1 – 13 mm 
sawmotor adjustable manual or motoric

weight of the machine 3000 kg 
weight of the switch cabinet 300 kg
 AUTOMATIC DOUBLE MITRE CUT SAW – COFFIN SAW DIGO DIMTER WITH CONTROLL SYSTEM AND DRILLING UNITS TYPE: 1113 VERSION CNC MACHINE LENGTH 4000 MM X MACHINE WIDTH 2620 MM WORK AREA LENGTH MAX. APPROX. 2600 MM WORKING WIDTH MAX. APPROX. 800 MM CNC VERSION PNEUMATIC CLAMPING OF THE WORK PIECE SAW MOTORS EACH 3 KW = 6 KW ADJUSTMENT OF WOOD LENGTH 0,7 KW ADJUSTMENT OF WOOD THICKNESS 0,7 KW = 1,4 KW SAW ARM MOVING SIDEWARDS 0,18 KW = 0,36 KW SAW MOTOR TILTING 0,18 KW = 0,36 KW MOTOR DRILLING UNITS 0,36 KW = 2.16 KW 3 DRILLING UNITS FROM BOTTOM EACH WITH 2 DRILLS LIFT MOVEMENT AND DRIVE OF THE DRILLING SPINDLES PNEUMATIC TOOL CHUCK 1 – 13 MM SAWMOTOR ADJUSTABLE MANUAL OR MOTORIC WEIGHT OF THE MACHINE 3000 KG WEIGHT OF THE SWITCH CABINET 300 KG
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: dimter , type: profipress 3500, year: 2003, continuous flow system: yes, work piece width min-max mm: 300 - 3500, min.-max. workpiece length in mm: 1300, min.-max. workpiece height in mm: 11 - 60, hydraulical/pneumatical: yes, high-frequency: yes, high / low pressure: yes, cylinder vertical: yes, cylinder horizontally: yes, pre-assembling conveyor: yes, glue application machine: yes, clamping: yes, disc saw transverse: yes, free text: 2800 betriebsstunden, year :2003 MANUFACTURER: DIMTER , TYPE: PROFIPRESS 3500, YEAR: 2003, CONTINUOUS FLOW SYSTEM: YES, WORK PIECE WIDTH MIN-MAX MM: 300 - 3500, MIN.-MAX. WORKPIECE LENGTH IN MM: 1300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 11 - 60, HYDRAULICAL/PNEUMATICAL: YES, HIGH-FREQUENCY: YES, HIGH / LOW PRESSURE: YES, CYLINDER VERTICAL: YES, CYLINDER HORIZONTALLY: YES, PRE-ASSEMBLING CONVEYOR: YES, GLUE APPLICATION MACHINE: YES, CLAMPING: YES, DISC SAW TRANSVERSE: YES, FREE TEXT: 2800 BETRIEBSSTUNDEN, YEAR :2003
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 75.000 €
Ubicación: Land-chain conveyor to vacuumelevator grecon dimter incl. downstacking of boards. manual check for defects on boards and marking with chalk. infeed to cut off saw opticut 304 r finger / end mill machine machine hk 200l application of glue / fingerjointing 20 mm jointpress grecon dimter planer rex homs-310k incl. grinding machine for round cutters cross-cut saw grecon dimter storage of laminas rollers approx 36 to application of glue and further to gluelam presses. glulam press tl 98 – 52 mtr – 4 sections CHAIN CONVEYOR TO VACUUMELEVATOR GRECON DIMTER INCL. DOWNSTACKING OF BOARDS. MANUAL CHECK FOR DEFECTS ON BOARDS AND MARKING WITH CHALK. INFEED TO CUT OFF SAW OPTICUT 304 R FINGER / END MILL MACHINE MACHINE HK 200L APPLICATION OF GLUE / FINGERJOINTING 20 MM JOINTPRESS GRECON DIMTER PLANER REX HOMS-310K INCL. GRINDING MACHINE FOR ROUND CUTTERS CROSS-CUT SAW GRECON DIMTER STORAGE OF LAMINAS ROLLERS APPROX 36 TO APPLICATION OF GLUE AND FURTHER TO GLUELAM PRESSES. GLULAM PRESS TL 98 – 52 MTR – 4 SECTIONS
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 45000 x 4000 x 2500 mm<br/>description: nominal cross section, minimum 30x12 mm, max. cutting range 260 x 12 mm (160 x 12 mm) / 160 x 80 mm (100 x 100 mm), max. ingoing lengths 6300 mm, max. feed speed 180 - 240 m / min, minimum cutting length 140 mm, standard equipment according to manufacturers brochure: variospeed, fixed length cutting, defect removal, full optimization up to max. input length, automatic sorting, total line length 45000 mm WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 45000 X 4000 X 2500 MM
DESCRIPTION: NOMINAL CROSS SECTION, MINIMUM 30X12 MM, MAX. CUTTING RANGE 260 X 12 MM (160 X 12 MM) / 160 X 80 MM (100 X 100 MM), MAX. INGOING LENGTHS 6300 MM, MAX. FEED SPEED 180 - 240 M / MIN, MINIMUM CUTTING LENGTH 140 MM, STANDARD EQUIPMENT ACCORDING TO MANUFACTURERS BROCHURE: VARIOSPEED, FIXED LENGTH CUTTING, DEFECT REMOVAL, FULL OPTIMIZATION UP TO MAX. INPUT LENGTH, AUTOMATIC SORTING, TOTAL LINE LENGTH 45000 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-automatic dimter type: oks 500 r
year of construction: 1988

cut to the chalk line and length input
cutting width approx. 300 mm
saw blade diameter of 500 mm
saw motor 7,5 kw
hydraulic motor 7,5 kw
feed speed 130 m / min.
cutting speed 0.5-1 sec.
cutting accuracy +/-1 mm, +/-0.15% max.
before the saw roller 6 m long x 700 mm wide (consisting of 2 rollers
side by side, each 300 mm wide) roller spacing approx. 350-600 mm
marking and inspection station
compound miter saw
the conveyor belt conveyor length 6.50 m x 200 mm wide waste trail band
conveyor belt with 10 ejectors 23 m long x 200 mm wide
machine is in production use.

AUTOMATIC DIMTER TYPE: OKS 500 R YEAR OF CONSTRUCTION: 1988 CUT TO THE CHALK LINE AND LENGTH INPUT CUTTING WIDTH APPROX. 300 MM SAW BLADE DIAMETER OF 500 MM SAW MOTOR 7,5 KW HYDRAULIC MOTOR 7,5 KW FEED SPEED 130 M / MIN. CUTTING SPEED 0.5-1 SEC. CUTTING ACCURACY +/-1 MM, +/-0.15% MAX. BEFORE THE SAW ROLLER 6 M LONG X 700 MM WIDE (CONSISTING OF 2 ROLLERS SIDE BY SIDE, EACH 300 MM WIDE) ROLLER SPACING APPROX. 350-600 MM MARKING AND INSPECTION STATION COMPOUND MITER SAW THE CONVEYOR BELT CONVEYOR LENGTH 6.50 M X 200 MM WIDE WASTE TRAIL BAND CONVEYOR BELT WITH 10 EJECTORS 23 M LONG X 200 MM WIDE MACHINE IS IN PRODUCTION USE.
Vendedor: FWB-Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-offer: 


 fingerjointing line famad dimter fingerjointing line famad dimter fingerjointing line famad dimter  
   
  
manufacturer: 

fingerjointing line famad dimter  
  
  
type: 

fingerjointing line famad dimter  
  
  
year of construction: 

2000 
  
  
machine condition: 

very good 
  
  
offertype: 

used machine offer  
  
  
location: 

poland 
  
        
  
technical data: 

czy chodzi?o ci o: linia pdf sk?ada si? z dwóch podstawowych sk?adników : z frezarko-czopiareki dfc 60 (gdzie obrabiane s? czo?a listew) oraz prasy do ??czenia na d?ugo?? phsl , na której nast?puje po??czenie elementów w listw? o d?ugo?ci do 6,6mb z mo?liwo?ci? zaprogramowania do o?miu mi?dzyci?? dziel?cych listw? na odcinki o d?ugo?ci zaprogramowanej przez obs?ug?. pomi?dzy tymi podstawowymi urz?dzeniami wyst?puj? urz?dzenia transportuj?ce pe?ni?ce jednocze?nie funkcj? wst?pnego czopowania przedstawiona konfiguracja linii, umo?liwia uzyskanie maksymalnej wydajno?ci dochodz?cej do 4500mb/zmian?. mikroprocesorowy uk?ad sterowania pozwala na elastyczne dostosowanie parametrów pracy do potrzeb u?ytkownika. prezentowana maszyna ma mo?liwo?? obróbki elementów typu „calzing” jak i elementów do produkcji blatów ( ??czonych „na kresk?”). zastosowanie sto?u odbiorczego z automatycznym podawaniem listew na przeno?nik wprowadzaj?cy prasy phsl umo?liwia obs?ug? linii przez jednego, podaj?cego elementy pracownika. stolik odbiorczy wyposa?ony jest w przes?on? buforuj?c? zwi?kszaj?c? wydajno?? i p?ynno?? pracy. linia pracuje w cyklu automatycznym z r?cznym podawaniem materia?u. elementy sk?adowe linii mog? by? z?o?one w ró?nych (uzgodnionych z odbiorc?) konfiguracjach umo?liwiaj?cych dostosowanie maszyny do warunków lokalowych u?ytkownika. dane techniczno - eksploatacyjne szeroko?? pakietu wej?ciowego frezarko-czopiarki mm 600 szeroko?? elementów klejonych mm 30 ÷ 155 d?ugo?? elementów klejonych mm 170 ÷ 1200 grubo?? elementów klejonych mm 20 ÷ 70 ci?nienie robocze powietrza mpa 0,6 zapotrzebowanie spr??onego powietrza m3/h ok 25 wydajno?? robocza cykl./min. do 2,5 (listwa 6000) d?ugo?? elementu sklejonego mm 4500 ÷ 6000 napi?cie robocze v ac 3/n/pe 400 v 50 hz napi?cie steruj?ce v dc 24 zapotrzebowanie mocy kw max 38 kw 
pdfd line consists of two basic components: with milling czopiareki dfc 60 (where the bars are machined face) and a press for splicing 
phsl, which are connecting elements in the strip up to 6.6mb of eight programmable mi?dzyci?? dividing strip to a length preset by the operator. between these basic facilities are conveyor systems which perform the function of the initial configuration shown obstructive lines allows a maximum capacity of up to 4500mb / change. 

microprocessor control allows for flexible adjustment of operating parameters to suit your needs. this machine has the ability to machine parts like OFFER: FINGERJOINTING LINE FAMAD DIMTER FINGERJOINTING LINE FAMAD DIMTER FINGERJOINTING LINE FAMAD DIMTER MANUFACTURER: FINGERJOINTING LINE FAMAD DIMTER TYPE: FINGERJOINTING LINE FAMAD DIMTER YEAR OF CONSTRUCTION: 2000 MACHINE CONDITION: VERY GOOD OFFERTYPE: USED MACHINE OFFER LOCATION: POLAND TECHNICAL DATA: CZY CHODZI?O CI O: LINIA PDF SK?ADA SI? Z DWóCH PODSTAWOWYCH SK?ADNIKóW : Z FREZARKO-CZOPIAREKI DFC 60 (GDZIE OBRABIANE S? CZO?A LISTEW) ORAZ PRASY DO ??CZENIA NA D?UGO?? PHSL , NA KTóREJ NAST?PUJE PO??CZENIE ELEMENTóW W LISTW? O D?UGO?CI DO 6,6MB Z MO?LIWO?CI? ZAPROGRAMOWANIA DO O?MIU MI?DZYCI?? DZIEL?CYCH LISTW? NA ODCINKI O D?UGO?CI ZAPROGRAMOWANEJ PRZEZ OBS?UG?. POMI?DZY TYMI PODSTAWOWYMI URZ?DZENIAMI WYST?PUJ? URZ?DZENIA TRANSPORTUJ?CE PE?NI?CE JEDNOCZE?NIE FUNKCJ? WST?PNEGO CZOPOWANIA PRZEDSTAWIONA KONFIGURACJA LINII, UMO?LIWIA UZYSKANIE MAKSYMALNEJ WYDAJNO?CI DOCHODZ?CEJ DO 4500MB/ZMIAN?. MIKROPROCESOROWY UK?AD STEROWANIA POZWALA NA ELASTYCZNE DOSTOSOWANIE PARAMETRóW PRACY DO POTRZEB U?YTKOWNIKA. PREZENTOWANA MASZYNA MA MO?LIWO?? OBRóBKI ELEMENTóW TYPU „CALZING” JAK I ELEMENTóW DO PRODUKCJI BLATóW ( ??CZONYCH „NA KRESK?”). ZASTOSOWANIE STO?U ODBIORCZEGO Z AUTOMATYCZNYM PODAWANIEM LISTEW NA PRZENO?NIK WPROWADZAJ?CY PRASY PHSL UMO?LIWIA OBS?UG? LINII PRZEZ JEDNEGO, PODAJ?CEGO ELEMENTY PRACOWNIKA. STOLIK ODBIORCZY WYPOSA?ONY JEST W PRZES?ON? BUFORUJ?C? ZWI?KSZAJ?C? WYDAJNO?? I P?YNNO?? PRACY. LINIA PRACUJE W CYKLU AUTOMATYCZNYM Z R?CZNYM PODAWANIEM MATERIA?U. ELEMENTY SK?ADOWE LINII MOG? BY? Z?O?ONE W Ró?NYCH (UZGODNIONYCH Z ODBIORC?) KONFIGURACJACH UMO?LIWIAJ?CYCH DOSTOSOWANIE MASZYNY DO WARUNKóW LOKALOWYCH U?YTKOWNIKA. DANE TECHNICZNO - EKSPLOATACYJNE SZEROKO?? PAKIETU WEJ?CIOWEGO FREZARKO-CZOPIARKI MM 600 SZEROKO?? ELEMENTóW KLEJONYCH MM 30 ÷ 155 D?UGO?? ELEMENTóW KLEJONYCH MM 170 ÷ 1200 GRUBO?? ELEMENTóW KLEJONYCH MM 20 ÷ 70 CI?NIENIE ROBOCZE POWIETRZA MPA 0,6 ZAPOTRZEBOWANIE SPR??ONEGO POWIETRZA M3/H OK 25 WYDAJNO?? ROBOCZA CYKL./MIN. DO 2,5 (LISTWA 6000) D?UGO?? ELEMENTU SKLEJONEGO MM 4500 ÷ 6000 NAPI?CIE ROBOCZE V AC 3/N/PE 400 V 50 HZ NAPI?CIE STERUJ?CE V DC 24 ZAPOTRZEBOWANIE MOCY KW MAX 38 KW PDFD LINE CONSISTS OF TWO BASIC COMPONENTS: WITH MILLING CZOPIAREKI DFC 60 (WHERE THE BARS ARE MACHINED FACE) AND A PRESS FOR SPLICING PHSL, WHICH ARE CONNECTING ELEMENTS IN THE STRIP UP TO 6.6MB OF EIGHT PROGRAMMABLE MI?DZYCI?? DIVIDING STRIP TO A LENGTH PRESET BY THE OPERATOR. BETWEEN THESE BASIC FACILITIES ARE CONVEYOR SYSTEMS WHICH PERFORM THE FUNCTION OF THE INITIAL CONFIGURATION SHOWN OBSTRUCTIVE LINES ALLOWS A MAXIMUM CAPACITY OF UP TO 4500MB / CHANGE. MICROPROCESSOR CONTROL ALLOWS FOR FLEXIBLE ADJUSTMENT OF OPERATING PARAMETERS TO SUIT YOUR NEEDS. THIS MACHINE HAS THE ABILITY TO MACHINE PARTS LIKE "CALZING" AS WELL AS COMPONENTS FOR THE MANUFACTURE COUNTERTOPS (AND PLACED "ON THE DASH"). APPLICATION OF THE RECEIVING TABLE WITH AUTOMATIC FEEDING CONVEYOR SLATS ON THE INTRODUCTORY PRESS PHSL PROVIDES SUPPORT LINE BY ONE, GIVING THE ELEMENTS OF THE EMPLOYEE. TABLE RECEIVER IS EQUIPPED WITH A SHUTTER BUFFER INCREASING PRODUCTIVITY AND WORKFLOW. THE LINE OPERATES IN AUTOMATIC WITH MANUAL LOADING OF THE MATERIAL. COMPONENTS OF THE LINE CAN BE MADE IN DIFFERENT (AGREED WITH THE CUSTOMER) CONFIGURATIONS TO CUSTOMIZE THE MACHINE'S HOUSING CONDITIONS. TECHNICAL SPECIFICATIONS - OPERATING THE WIDTH OF THE INPUT PACKET SHAPERS MILLING MM 600 THE WIDTH OF THE ELEMENTS GLUED MM 30 ÷ 155 THE LENGTH OF THE ELEMENT GLUED MM 170 ÷ 1200 THE THICKNESS OF THE ELEMENTS GLUED MM 20 ÷ 70 WORKING PRESSURE OF 0.6 MPA AIR COMPRESSED AIR M3 / H APPROXIMATELY 25 OPERATING PERFORMANCE CYCLE. / MIN. 2.5 (6000 BAR) THE LENGTH OF THE ELEMENT GLUED MM 4500 ÷ 6000 OPERATING VOLTAGE V AC 3 / N / PE 400 V 50 HZ CONTROL VOLTAGE 24 V DC DEMAND KW MAX 38 KW
Vendedor: PPHU Lignum Przemysław Kretowicz
Año de construcción: usado
Ubicación: Land-dimter dfu pia description

dimter continuous verleimalage type dfu / hw fl 4500
system for plates (joint) - and siping (upright) gluing

suitable for softwood and pva glue (possibly also melamine
(requires new glue with mixer)

dimter principle in the pass system with empty joint and hot water press bed

consisting of following positions:
-transverse as a feeding station with about 2.5 m buffer
-angle station and feed system
-glue indication for plate production (glue side, head)
-indication of glue for siping (glue head from above)
with counter for empty joint
with glue heads for clockwork order and glue tanks, etc.
-stacking station with optional turning station
(at hochkantverleimung)
-collecting station package width by max 700 mm
-inline transport of packages by wide roller conveyor to the einschiebeposition
-hydraulic module station heavy duty
-hydraulicher a slider, stroke 700 mm with synchronous shaft for parallel slot
-heavy front frame with hydr. check units (dimter patent)
-(keeps the gluing pressure during and after the einschiebetakt)
-press bed with heating zone and heat pipes, top and bottom, length 7 m
-intermediate frame and 3 m cooling zone (can be heated by optionally)
-separation device for the safe separation of the parts in the empty gap
-with draining device by side chains at more serious dimension conversion.
-e.g. by flach thin on upright
chain transport approximately 3m long
-linking with existing prior dimter cutting saw and stacking unit
-angle station and wide roller length 6.5 m 1.3 m wide
-with crosscut saw to trim the ends of boards and scantlings
-wide roller conveyor (length: 7 m 1.3 m wide) to cross-cut saw with mechan. length stop
-spout breitrollenahn ca 10 m long
-with integrated stack tongues and lateral transverse shear of the plates or the scantlings
-with lifting table for the formation of the stack up to 1.2 m wide
-warning lifting table is mine.
 DIMTER DFU PIA DESCRIPTION DIMTER CONTINUOUS VERLEIMALAGE TYPE DFU / HW FL 4500 SYSTEM FOR PLATES (JOINT) - AND SIPING (UPRIGHT) GLUING SUITABLE FOR SOFTWOOD AND PVA GLUE (POSSIBLY ALSO MELAMINE (REQUIRES NEW GLUE WITH MIXER) DIMTER PRINCIPLE IN THE PASS SYSTEM WITH EMPTY JOINT AND HOT WATER PRESS BED CONSISTING OF FOLLOWING POSITIONS: -TRANSVERSE AS A FEEDING STATION WITH ABOUT 2.5 M BUFFER -ANGLE STATION AND FEED SYSTEM -GLUE INDICATION FOR PLATE PRODUCTION (GLUE SIDE, HEAD) -INDICATION OF GLUE FOR SIPING (GLUE HEAD FROM ABOVE) WITH COUNTER FOR EMPTY JOINT WITH GLUE HEADS FOR CLOCKWORK ORDER AND GLUE TANKS, ETC. -STACKING STATION WITH OPTIONAL TURNING STATION (AT HOCHKANTVERLEIMUNG) -COLLECTING STATION PACKAGE WIDTH BY MAX 700 MM -INLINE TRANSPORT OF PACKAGES BY WIDE ROLLER CONVEYOR TO THE EINSCHIEBEPOSITION -HYDRAULIC MODULE STATION HEAVY DUTY -HYDRAULICHER A SLIDER, STROKE 700 MM WITH SYNCHRONOUS SHAFT FOR PARALLEL SLOT -HEAVY FRONT FRAME WITH HYDR. CHECK UNITS (DIMTER PATENT) -(KEEPS THE GLUING PRESSURE DURING AND AFTER THE EINSCHIEBETAKT) -PRESS BED WITH HEATING ZONE AND HEAT PIPES, TOP AND BOTTOM, LENGTH 7 M -INTERMEDIATE FRAME AND 3 M COOLING ZONE (CAN BE HEATED BY OPTIONALLY) -SEPARATION DEVICE FOR THE SAFE SEPARATION OF THE PARTS IN THE EMPTY GAP -WITH DRAINING DEVICE BY SIDE CHAINS AT MORE SERIOUS DIMENSION CONVERSION. -E.G. BY FLACH THIN ON UPRIGHT CHAIN TRANSPORT APPROXIMATELY 3M LONG -LINKING WITH EXISTING PRIOR DIMTER CUTTING SAW AND STACKING UNIT -ANGLE STATION AND WIDE ROLLER LENGTH 6.5 M 1.3 M WIDE -WITH CROSSCUT SAW TO TRIM THE ENDS OF BOARDS AND SCANTLINGS -WIDE ROLLER CONVEYOR (LENGTH: 7 M 1.3 M WIDE) TO CROSS-CUT SAW WITH MECHAN. LENGTH STOP -SPOUT BREITROLLENAHN CA 10 M LONG -WITH INTEGRATED STACK TONGUES AND LATERAL TRANSVERSE SHEAR OF THE PLATES OR THE SCANTLINGS -WITH LIFTING TABLE FOR THE FORMATION OF THE STACK UP TO 1.2 M WIDE -WARNING LIFTING TABLE IS MINE.
Vendedor: ScanSolutions GmbH
Año de construcción: usado
Ubicación: Land-hd 800 description

dimter v zinc plant type hk-800

system suitable for vertical and horizontal hot-dip galvanizing
suitable for hard and soft wood!

dimter principle: wooden stands milling unit drive
-very good service and maintenance condition

consisting of following positions:

-loading station with faechertransport (3 packets in the buffer)
-package milling machine with doppelfraesaggregat
2 slice spanern with 2 milling spindles
10 mm wedge tine length special teeth shape (round top)
-with the machine. glue specification (roller) and dosing device
(suitable for pva glues)
-universal turning and transfer station
for horizontal and vertical hot-dip galvanizing (flat and upright)
-transverse as a buffer for continuous loading.
-feeding station with collection station as longitudinal buffer
-heavy double roll feed with 2 speeds
(feed max 60 m / min)
-dimter repeatedly press type pn 10 shr 4.6 m
type head press with step feeder (dimter patent)
force adjustable up to max 10.ooo dan (10 to)
with integrated length compound miter saw,
final length stepless 2,500 mm 4,600 mm adjustable
-electron. length measurement for short-length 1,000 mm
-fully automatic stacking unit with bar magazine
with conveying to working height ca 2.200 mm
with location collection and package building
with lifting table and acceptance by forklift
dimensions: width 1000 mm and 1,000 mm height
important: no pit required

product information and technical data:

timber length: 150 1.200 mm
wood width: 40 150 mm
wood thickness: 15 80 mm
cross section max.: 100 cmâ²

tine length 10 mm

capacity theoretical values:

performance of milling machine: 3 packs / minute
press power: max. 30 linear metre / minute

staff:
1 man feeding

1 man to the monitoring and logging

port values:
80 kw / 380 v / 50 hz
siemens s 5 electron. control
extraction 30 m / sec
air 8 bar / 1200 nl consumption
colour green ral 6011. HD 800 DESCRIPTION DIMTER V ZINC PLANT TYPE HK-800 SYSTEM SUITABLE FOR VERTICAL AND HORIZONTAL HOT-DIP GALVANIZING SUITABLE FOR HARD AND SOFT WOOD! DIMTER PRINCIPLE: WOODEN STANDS MILLING UNIT DRIVE -VERY GOOD SERVICE AND MAINTENANCE CONDITION CONSISTING OF FOLLOWING POSITIONS: -LOADING STATION WITH FAECHERTRANSPORT (3 PACKETS IN THE BUFFER) -PACKAGE MILLING MACHINE WITH DOPPELFRAESAGGREGAT 2 SLICE SPANERN WITH 2 MILLING SPINDLES 10 MM WEDGE TINE LENGTH SPECIAL TEETH SHAPE (ROUND TOP) -WITH THE MACHINE. GLUE SPECIFICATION (ROLLER) AND DOSING DEVICE (SUITABLE FOR PVA GLUES) -UNIVERSAL TURNING AND TRANSFER STATION FOR HORIZONTAL AND VERTICAL HOT-DIP GALVANIZING (FLAT AND UPRIGHT) -TRANSVERSE AS A BUFFER FOR CONTINUOUS LOADING. -FEEDING STATION WITH COLLECTION STATION AS LONGITUDINAL BUFFER -HEAVY DOUBLE ROLL FEED WITH 2 SPEEDS (FEED MAX 60 M / MIN) -DIMTER REPEATEDLY PRESS TYPE PN 10 SHR 4.6 M TYPE HEAD PRESS WITH STEP FEEDER (DIMTER PATENT) FORCE ADJUSTABLE UP TO MAX 10.OOO DAN (10 TO) WITH INTEGRATED LENGTH COMPOUND MITER SAW, FINAL LENGTH STEPLESS 2,500 MM 4,600 MM ADJUSTABLE -ELECTRON. LENGTH MEASUREMENT FOR SHORT-LENGTH 1,000 MM -FULLY AUTOMATIC STACKING UNIT WITH BAR MAGAZINE WITH CONVEYING TO WORKING HEIGHT CA 2.200 MM WITH LOCATION COLLECTION AND PACKAGE BUILDING WITH LIFTING TABLE AND ACCEPTANCE BY FORKLIFT DIMENSIONS: WIDTH 1000 MM AND 1,000 MM HEIGHT IMPORTANT: NO PIT REQUIRED PRODUCT INFORMATION AND TECHNICAL DATA: TIMBER LENGTH: 150 1.200 MM WOOD WIDTH: 40 150 MM WOOD THICKNESS: 15 80 MM CROSS SECTION MAX.: 100 CM&ACIRC;&SUP2; TINE LENGTH 10 MM CAPACITY THEORETICAL VALUES: PERFORMANCE OF MILLING MACHINE: 3 PACKS / MINUTE PRESS POWER: MAX. 30 LINEAR METRE / MINUTE STAFF: 1 MAN FEEDING 1 MAN TO THE MONITORING AND LOGGING PORT VALUES: 80 KW / 380 V / 50 HZ SIEMENS S 5 ELECTRON. CONTROL EXTRACTION 30 M / SEC AIR 8 BAR / 1200 NL CONSUMPTION COLOUR GREEN RAL 6011.
Vendedor: ScanSolutions GmbH
Año de construcción: usado
Ubicación: Land-wood length: 3500-5000mm, wood width: 80-260mm, wood thickness: 25-50mm, capacity: approx. 15000m/d, i. a. mit workpiece loading unit, fingerjointing press dimter pn 10 h, milling- and gluing unit dimter hk 200 l, 2-sided-planing machine kupferm?hle, product packaging.  WOOD LENGTH: 3500-5000MM, WOOD WIDTH: 80-260MM, WOOD THICKNESS: 25-50MM, CAPACITY: APPROX. 15000M/D, I. A. MIT WORKPIECE LOADING UNIT, FINGERJOINTING PRESS DIMTER PN 10 H, MILLING- AND GLUING UNIT DIMTER HK 200 L, 2-SIDED-PLANING MACHINE KUPFERM?HLE, PRODUCT PACKAGING.
Vendedor: Innovac GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DIMTER types: