726 ofertas

Año de construcción: 1975
Precio: 58.000 €
Ubicación: Land-de DE Finnland
Vendedor: LM Dairy Consulting

A 2 101 1 MKT evaporator plant with high concentrator 1 MKT evaporator plant with 3 columns with staem injection compression to produce vacuum with a high concentrate plant from MKT with 2 columns manufacturer year 1975 inlet capacity is 10.000 litre per hour water evaporation is until to 9.100 litre/hour concentrate outlet is until to. 1.400 to 2.000 l/hour concentrate has until to 57% dry matter more details please look on page 3 MKT evaporatr equipment is: basement floor standing in front left side 3 water circulation pumps 5 concentrate pumps 1 density weighting plant 1 Grundvoss water circulation pump 1 tank, not insulated not double jacket standing on feet  ... more

Año de construcción: usado
Ubicación: Land-DE Germany, 47652 Weeze
Vendedor: Thünnesen GmbH

type INFRA EE 520/180, model 09/1998\r\n5 decks, 1800 x 2000 mm\r\ncondition as it is, dismantled and loaded \r\n more

Año de construcción: usado
Precio: 370 €
Ubicación: Land-ch CH Eriswil
Vendedor: MATEC system+technik GmbH

Steep conveyors for Earth material with rubber strap in dismantled condition Built in 1947 Weight approx. 680 kg Length 7 m Belt width 500 mm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

Año de construcción: 2018
Ubicación: Land-sl SL Slowenien
Vendedor: OBM Recycling Machinery B.V.

Manufacturer ANIS Trend d.o.o. Type ATS110-75D 60 tons Year of construction 2018 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throughput rate under operating conditions approx. 235 m³/hour Bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l) Driving motor 45 kW Oil cooler 1,5 kW Oil heater 2,0 kW Main Electric power 400 V / 50 Hz  ... more

Año de construcción: 2002
Precio: 19.500 €
Ubicación: Land-de DE 33449 Langenberg, Neuzeller Straße 42
Vendedor: SN - InTec Ltd

used agricultural machines planers glue Binder-stack machine suitable for stacking of glue Binder It can also as one and off promotion for a mechanization of a planing plant be converted and completed Manufacturer: Minda industries Condition: used, dismantled Year of construction: 2002 Reference number: ATWE126 consisting of: Heavy conveyor belt drive Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Heavy conveyor belt with Abschiebebalken, stacking and lifting table Length: 18m Width (lenght): 0, 8 m Roll diameter: 160mm Drive: SEW 7, 5kW motor gearboxes All rolls powered Hydraulically powered lift table, st ... more

Año de construcción: 2000
Ubicación: Land-nl NL Niederlande
Vendedor: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Typ HBT 600/2000 x 21,986 Year of contruction 2000 (overhauled 2017) Drive power 7,5 kW Length infeed conveyor over all 6,723 mm Length module infeed conveyor 5,500 mm Height infeed conveyor over all 1,300 mm Height side wall infeed conveyor 500 mm Length elevating conveyor over all 13,923 mm Lenght module elevating conveyor 13,300 mm Height side wall elevating conveyor 800 mm Gradient of elevating conveyor 30° Length gooseneck 1,340 mm Lenght module gooseneck 1,000 Slope of gooseneck 15° Height drive shaft over ground approx.. 5,900 mm Effective width 2,000 mm Pit dimensions 9,900 x 2,750 x 1,300 mm (l x w x h) Transport dimensions, dismantled 16,200 x 2,500 x 2,75 ... more

Año de construcción: 2005
Ubicación: AG 79002 Vynnyky, 7 Bor str
Vendedor: CC

THE COMPLETE Tetra Pak LINE A3 FLEX 200 SQUARE WITN QUICK CHANGE KIT FOR 250 SQUARE. MANUF. IN 2005, HAS 23000 RUNNING HOURS, INCLUDES: - A3 FLEX FILLER 200/250 SQ - EASY RIDE ACCUMULATOR - TCA40 SCREW CAP APPLICATOR - TCBP70 W/A PACKER - CONVEYORS NOT DISMANTLED, EXCELLENT CONDITION. more

Año de construcción: 2009
Precio: 66.600 EU?
Ubicación: Land-pl PL
Vendedor: Kennedy Machines

The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device. more

Año de construcción: 2015
Precio: 19.950 €
Ubicación: Land-de DE Bautzen
Vendedor: Alexander von Westernhagen

Extra deep pallet rack with metal grating in the levels (it is created per level an area of approx. B: 3, 60 m x d: 2, 20 m) Stow, frame height approx. 6, 50 m, approx. 750 kg / pallet, Max over 1,000 Euro pallets used -. Site price: Price (fixed) from site: â?¬19.950.-(net), dismantled and loaded! Price incl. approx. 20 pieces of stanchion bases (see last photo) where the bars are - stacked ideal for multiple reuse! Manufacturer: Stow Type: must be submitted to Year of construction: approx. 2015 Frame height: approx. 6, 50 m Traverse length: 3, 60 m Frame depth: approx. 2 x 1, 10 m = 2, 20 m-deep maximum load capacity: 3,000 kg = 750 kg / pallet Field capaci ... more

Año de construcción: 1992
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 10000 x 3000 mm Description: Serial number 092/185. Flow rate 150 l. Filter size 5000 x 4500 x 2500 mm. Silos included, already dismanled and loaded on semi-trailer 7000 x 2500 mm. Trailer excluded <,/ b>, See foto more

Año de construcción: 2008
Precio: 4.250 €
Ubicación: Land-de DE Bautzen
Vendedor: Alexander von Westernhagen

Pallet rack, metalsistem, 1, 5to needed load capacity, frame height, approx. 4-4, 50 m, traverse length 2, 70 m total maximum 474 pitches â -. Priority complete acceptance! Price from location: now only â?¬4.250.-instead of â?¬5.250.-(net), dismantled and loaded! Supplier: ELIMOR import-export trading GmbH, Alzey Manufacturer (should be): metalsistem Lombardia srl Type: pallet rack Year of built: unknown CA 2008-2010 Frame height approx.: 4-4.50 m Frame depth: approx. 1 m Traverse length: 2, 70 m Capacity: 1,500 kg = 500kg / pallet Maximum Bay load: 12,000 kg Number of frames: about 11 units in level 4, 50m approx. 37 units in height 4m + 3 de ... more

Año de construcción: 1998
Precio: used machinery auction RESALE 2.199 €
Ubicación: Land-pl PL Poland, 46-380 Dobrodzie?
Vendedor: Surplex GmbH

Weight approx.: 2200 kg Dimensions (l x w x h) approx.: 3000 x 2500 x 2400 mm Description: MEGAMAT 106X/406/11 Paternoster / Automated Storage Unit / Workshop Equipment - type name: 106X/406/11 - unit number: 12433 - year of construction technical details: - max. shelf load: 180 kg - average shelf load: 180 kg - total admissible load: 1980 kg - total unadmissible load: 800 kg - number shelves: 11 electrical details: - diagram: MLT03-019-03 - rated operational voltage: 3Ph/N/PE 400 V - frequency: 50 Hz - dimensioning operating current: 6 A - operating mode: S4 40 %ED - safety device in the supply: 10 A - the paternoster is dismantled more

Año de construcción: 2007
Precio: 4.950 €
Ubicación: Land-de DE 65719 Hofheim / Wallau, Wiesbadener Str. 6
Vendedor: Alexander von Westernhagen

Pallet racking, Dexion, equipped with gratings in the levels, frame height approx. 4 m, 800 kg / pallet, approx. 340 pallets - used -. Site price: Price from site: â?¬4.950.-(net), dismantled and loaded! Almost all traverse levels equipped with gratings, price including existing corner starting protectors, frame protectors, spacers etc.! Manufacturer: Dexion Type: Speedlock P90-M Year of build: 2007 (mainly) + 2013 Frame height: approx. 4 m Frame depth: approx. 1, 10 m Bar type: SLB 100/15 and SLO 089/20 Length: 2, 70 m = maximum load capacity: 2,400 kg = 800 kg / pallet Length: = 1, 80 m maximum load capacity: 1,900 kg = 950 kg / pallet Maximum field capacity: ... more

Año de construcción: 2002
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-de DE Germany, 70435 Stuttgart-Zuffenhausen
Vendedor: Surplex GmbH

Weight approx.: 8000 kg Dimensions (l x w x h) approx.: 1500 x 3000 x 5000 mm max. permitted load per load bucket: 280 kg max. permitted load: 2x 10.000 kg Description: HÄNEL Lean-Lift The Hänel Lean-Lift® is storage rationalization and stored goods protection in one: At the center of this closed system works a computer-controlled positioning lift - the extractor Special features: ? Fast storage and access times. ? High storage compaction, even with different filling heights. ? Load capacity per container up to 280kg at 32 Copntainer ? Load capacity up to 20.000kg (2x 10.000 kg) ? Integrated Warehouse Management. The Lean-Lift will be dismantled in week 43, 2018 and has to be picked u ... more

Año de construcción: 2008
Ubicación: Land-de DE Dortmund
Vendedor: Alexander von Westernhagen

Warehouse stage approx. 494 m 2 (about 19.55 x 25, 30 m), designed with chipboard - used -: Site price: Price from site: â?¬22.500.-(net), dismantled and loaded! The cost of the self-destruction on request! The partly to bottom shelves have already been sold! Manufacturer, type: unknown Capacity: unknown Plate: not available! Year of construction: 2008 Floor space: approx. 19.55 width, approx. 25,30 length 1Treppe 1 pallet passing space Lower edge of stage: approx. 2.62 Grid of the stage rack: 2 m in depth and 2, 70 m in width Condition: good Available: available now Location: Dortmund The glaring partly prepared pallet rack is not part of the sal ... more

Año de construcción: 2005
Precio: used machinery auction RESALE 21.000 €
Ubicación: Land-es ES Spain, 28890 Loeches
Vendedor: Surplex GmbH

Weight approx.: 11000 kg Dimensions (l x w x h) approx.: 25000 x 4500 x 3500 mm Description: Consisting in: 1 driven roller conveyor 2000 x 1500 mm SUPERFICI E83V20 1 driven belt conveyor 3500 x 1500 mm SUPERFICI TT1/35 1 cleaning brush machine SUPERFICI SISAL-1, maximum workpiece height approx. 160 mm, with blowers, brush, blowers 1 driven roller conveyor 1450 x 1500 mm with lamp 1 automatic spraying machine SUPERFICI TWIN SPRAY ACQUA, maximum workpiece height approx. 130 mm, tunnel length 1900 mm, useful working width 1500 mm, 2 heads with 2 application guns each 1 vertical dryer SUPERFICI CONTIVERT ETC1-7-7500 with 7 levels with dimensions 7250 x 1500 mm 1 driven belt conveyor SUPERFICI T ... more

Año de construcción: 1998
Precio: 120 €
Ubicación: Land-de DE 65719 Hofheim / Wallau, Wiesbadener Str. 6
Vendedor: Alexander von Westernhagen

79 piece frame collar shelving, double sided, arm's length 720 mm, 280 kg / arm, frame height approx. 5 m, - used -: Price per frame from site: â?¬195.-(net), dismantled and loaded! Price for complete acceptance: now only â?¬9.500.-instead of 12,500 (net), dismantled and loaded! Manufacturer: Jungheinrich Type: Hubertus Year of construction: 1998 Upper edge 1st Edition: 180mm Top storage level: 6 x 800 mm Max load: Collar arm load: 280 kg Collar sleeve length: 720 mm Collar arm profile: 180 Unilateral rack load: 1,680 kg Shelf height: 5,000 mm 25 piece basic shelving 44 piece mounting shelves Cross section frame and legs: 180 x 90 mm Pro frame ap ... more

Año de construcción: 1995
Ubicación: Land-de DE Germany, 09526 Olbernhau
Vendedor: Surplex GmbH

Weight approx.: 1 kg Dimensions (l x w x h) approx.: 1 x 1 x 1 mm Description: The HARBS house door production line is a CNC controlled, double-sided, length-independent, production line for the longitudinal and transverse machining of house door parts. The production line is produced for the production of about 200 doors in 8 hours. The production line is not inussed yet. However, it is under electricity, so certain operations can be carried out. The spare parts supply for this production line is guaranteed by the company Harbs technology Blomberg-Service GmbH. The control and control computer technology was realized by the company Ferrocontrol and can continue to be supervised by them. ... more

Año de construcción: 2010
Precio: 209.500 €
Ubicación: Land-de DE 65719 Hofheim / Wallau, Wiesbadener Str. 6
Vendedor: Alexander von Westernhagen

Kasto cassette long goods warehouse used for up to 6, 50 m long goods, approximately 624 cassettes, 2to / cassette, including warehouse management and relative --: Price from site: â?¬209.500.-(net), plus dismantling etc.! Manufacturer: Kasto Type: UNITOP 3.0 Year of construction: 2010 Complex consists of 19 rack frame units (17 double-sided, 2 sided) External dimensions of the system: Length: approx. 42, 90 m Depth of the rack system: approx. 9, 50 m Depth incl. out-feed station: approx. 16, 50 m Shelf height: approx. 7, 40 m OK RBG height: approx. 9, 05 m maximum storage: 1. 872to Cassette: Type 1 Usable dimensions: Length: 6.500 mm Width: 520mm Bela de hei ... more

Año de construcción: 1975
Precio: used machinery auction RESALE 600 €
Ubicación: Land-de DE Germany, 85457 Hörlkofen
Vendedor: Surplex GmbH

Weight approx.: 1150 kg x-travel: 300 mm y-travel: 200 mm Dimensions (l x w x h) approx.: 1800 x 2200 x 2500 mm z-travel: 350 mm Table dimensions l x w: 440 x 290 mm Description: AGIE BF Die Sinking EDM Machine - operating voltage: 3 x 380 V, 50 Hz - total connected load: 1 kVA - with dielectric unit and several clamping arbors - machine is already dismantled - attention: The pick up must take on 5 October 2018! more

Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-de DE 77933 Lahr
Vendedor: USEDmarket GmbH

â?¢ intended for this barrel storage â?¢ galvanized â?¢ Height: 4.00 m â?¢ Depth: approx. 1.10 m â?¢ Width per unit: approx. 2.20 m â?¢ Overall width: 8.80 m â?¢ Roof and sumps â?¢ dismantled â?¢ approximately 4.5 load meter and 5 Euro pallets more

Año de construcción: 1995
Ubicación: Goldenstedt
Vendedor: WeMa A. Pigge GmbH

sheet width: 2080 mm plate thickness: 15 / 12 mm distance between columns: 2300 mm throat: 500 mm cutting gap adjustment: mm true cutting angle adjustable: rear stop: total power requirement: 30 kW weight of the machine ca.: 11,5 t dimensions of the machine ca.: 2900 x 2150 x 2900 m Plate thickness maximum performance: 15 mm Plate thickness continuous performance: 12 mm The machine is in a good optical condition and has functioned well until dismanteling. however,There are leakages on the cylinders, the low holders and on some screws. Moreover, some low holders and 3 low holder?s plates are missing, but with some talent you probably can produce them by yourself. more

Año de construcción: 1995
Precio: 13.600 €
Ubicación: Land-de DE 33335 Gütersloh, Anemonenweg 8
Vendedor: Venker Werkzeugmaschinen GmbH

Maximum cutting length: 6,000 mm Maximum blade diameter: 550 mm Auto. Positioning via E 255 control Digital angle display for tilt and swivel both units Roller conveyor travelling with Machine is dismantled in our warehouse (see last two photos) more

Año de construcción: 1983
Ubicación: DE - 78234 Engen
Vendedor: ProdEq Trading GmbH

WORKING RANGE TURNING: - swing diameter (max): 6300 mm - worpiece length max.: 2500 mm - workpiece weight max.: 40000 kg FACING PLATE (TURNING MACHINE): - diameter of surface plate: 3200 mm - spindle revolutions (min): 0.8 /min - spindle revolutions (max): 80 /min - number of gears: 2 - continuous speed variation: no: - drive power: 80 kW - spindle torque: 115000 Nm - c-axis: no: CROSS BEAM: - W-axis travel: 1900 mm - cross beam adjustment velocity: 500 mm/min CROSS BEAM SLIDE: - Z-axis travel: 1600 mm - X-axis travel: 2200 mm - distance facing plate tool fixture (max): 2550 mm - swivelling range: -30 ° - swivelling range: 30 ° - traverse velocity Z (min): 0 ... more

Año de construcción: 2002
Ubicación: Land-de DE
Vendedor: Peter Heidenreich Maschinenhandel

Line for biscuit rolls manufacturer : Hecrona Type : Steel belt oven 1000/16 YOM : 2002 working width : 1000mm Bake room length : 16000mm Dimensions : total length Oven approx. 25m : total length line approx 45m Width approx. 2000mm High approx. 3000mm Fuel : gas different : dough manifold, Belt oiling unit, belt cleaning unit, cream manifold, Tonelli double roling station & Guillotine, fully rebuilt 2016 after not used We offer this machine in 'as is' condition, without warranty ex location germany, without dismantling more

Año de construcción: 1987
Ubicación: DE-78234 Engen
Vendedor: ProdEq Trading GmbH

pressure: t distance between columns: mm stroke: mm --------------------------------------------------: PRESS DESIGN: - drive system: hydraulic: - openings in uprights: no: - number of suspensions: 2 - number of slide actions: 1 - slide ejectors / cushion: no: - table cushion: yes: - opening in table: no: - quick die change system: no: PRESS FORCES: - total force (nominal): 1000 to PRESS TABLE: - table surface (left-right): 2500 mm - table surface (front-back): 1500 mm - thickness of bolster plate: 140 mm - height above floor level: 300 mm SLIDE: - stroke: 1250 mm DIE CUSHION (TABLE CUSHION): - number of cushions: 5 - working principle: hydraulica ... more

Año de construcción: usado
Precio: 8.000 €
Ubicación: Land-de DE 08058 Zwickau, Alter Teichweg 3
Vendedor: Bäckereimaschinen P. & M. Fiolka GbR

for sale a Glimek dough divider SD is 180 XLEArbeitsbereich: 180 g - 2300gLeistung: 1, 1kwDer clerk is built in 2005 but many years stood still. Chamber and piston are in great condition. The machine was almost completely dismantled by us, cleaned and restored in a top condition. AusweisbarFür further questions we are happy to VAT available more

Año de construcción: 1979
Ubicación: DE-78234 Engen
Vendedor: ProdEq Trading GmbH

pressure: 100 t distance between columns: mm stroke: 320 mm --------------------------------------------------: PRESS DESIGN: - drive system: hydraulic: - openings in uprights: yes: - number of slide actions: 1 - slide ejectors / cushion: yes: - table cushion: no: - quick die change system: no: PRESS FORCES: - total force (nominal): 100 to PRESS TABLE: - table surface (left-right): 800 mm - table surface (front-back): 630 mm - opening in bed (diameter): 100 mm - number of T-slots: 2 SLIDE: - table surface (left-right): 800 mm - table surface (front-back): 630 mm - stroke: 320 mm SLIDE (HYDR. PRESS): - approximation velocity max.: 280 mm/s - working v ... more

Año de construcción: usado
Precio: 290.000 €
Ubicación: Land-de DE 04356 Leipzig, Am alten Flughafen 1
Vendedor: Regalux GmbH

We offer an automated small part storages AKL Mecalux manufacturer's for sale. The plant has been completely dismantled, certainly prepared for transport and is available at any time. Value of a new asset is â?¬900,000. The offered was only about 2 years in operation. Our company offers you a full range of services. We design, deliver and assemble the equipment according to predetermined customer needs. We operate all over Europe. Our team speaks german, English, French, Russian and Polish. Like to speak to us. It is an automated small parts warehouse consisting of from pallet racks, flow racks, Pack courts and conveyor systems. Flow racks have 4 LagerebenePalettenregale h ... more

Año de construcción: 1988
Ubicación: Switzerland
Vendedor: ProdEq Trading GmbH

WORKING RANGE TURNING: - swing diameter (max): 930 mm - turning diameter (max): 630 mm - worpiece length max.: 12000 mm BED GAP / BRIDGE: - swing in gap: 1200 mm MAIN SPINDLE: - spindle revolutions (max): 710 /min Machine condition: Machine completely revised and trimmed for new - Headstock completely renewed and new bearings The machine is dismantled in stock and mechanically in a very good condition. Depending on customer requirements the machine is completed on .. - conventional - Cycle control - CNC Control Converted to CNC-Control includes . Geometry work - lock box on NC technology - cross slide on ballscrew - servomotors for axis drives in X and Z - digital measuring system on  ... more

Año de construcción: 2000
Ubicación: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Vendedor: RDA Recycling Machinery GmbH

HSM 500.1 VL (No. 20) vertical baling press, 4 kW Press power 54 t Constructed in 2000 Technical Details: Manufacturer HSM Pressen, Deutschland Type 500.1 VL Serial-No. 210156406 Year of construction 2000 Press power 54 t Drive power 4 kW Feed channel Approx. 1.150 x 565 mm Bale size Max. 1.200 x 800 x 1.000 – 1.200 mm Bale weight Approx. 380 – 500 kg Press chamber dimensions 1.200 x 800 x 1.520 mm Transport dimension Approx.1.824 x 1.213 x 2.300 mm (LxBxH) Machine weight Approx. 2.100 kg Please note: All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors. This offer is non-binding, prior ... more

Año de construcción: 1988
Ubicación: DE-78234 Engen
Vendedor: ProdEq Trading GmbH

pressure: 160 t plate thickness: 6 mm no of strokes: 70 Hub/min --------------------------------------------------: SLIDE: - total force (nominal): 160 to - ram adjustment: 80 mm - stroke: 60 mm - stroke rate (min.): 20 /min - stroke rate (max.): 70 /min - main drive power: 11 kW V-RING: - nominal force: 40 to - stroke: 14 mm COUNTER RAM: - nominal force: 50 to - stroke: 10 mm TOOL DIMENSIONS: - lower table - width: 480 mm - lower table - depth: 520 mm - upper table - width: 480 mm - upper table - depth: 520 mm - shut height max.: 314 mm - distance between columns (H-frame): 500 mm - passline opening (free passage in side columns): 220 mm STRIP-FEEDER: -  ... more

Año de construcción: 2001
Ubicación: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Vendedor: RDA Recycling Machinery GmbH

HSM 500.1 VL (No. 26) vertical baling press, 7,5 kW Press power 50 t Constructed in 2001 Technical Data: Manufacturer HSM Pressen, Deutschland Type 500.1 VL Serial-No. 200141314 Year of construction 2001 Press power 50 t Drive power 7,5 kW Feed channel Approx. 1.150 x 565 mm Bale size Max. 1.200 x 800 x 1.000 – 1.200 mm Bale weight Approx. 380 – 500 kg Press chamber dimensions 1.200 x 800 x 1.520 mm Transport dimension Approx.1.900 x 1.300 x 2.300 mm (LxBxH) Machine weight Approx. 2.100 kg Please note: All technical data refer to specifications of producer/owner. We will not assume liability for the given statements and possible errors. This offer is non-binding, prio ... more

Año de construcción: 1972
Ubicación: Nordrhein-Westfalen
Vendedor: Plum & Partner Werkzeugmaschinen GmbH

x-travel: 2210 mm y-travel: 820 mm workpiece height: 860 mm table-size: 2000 x 750 mm length of stroke min./max.: 163 - 2210 mm column daylight: 850 mm work speed: 5-55 m/min return speed: 5-75 m/min cross rail adjustment - horizontal: 880 mm cross rail adjustment - vertical: 250 mm side head - cross travel: 250 mm side head - vertical travel: 850 mm feeds crossrail slide: horiz 0,1-10/vert. 0,1-5 mm/min feeds side carriage: 0,1 - 5 mm/min workpiece weight: 5400 kg pulling power: 4000 kg total power requirement: 34 kW weight of the machine ca.: 12,8 t dimensions of the machine ca.: 6 x 3 x 2,56 m Condition: ready for operation: Hydraulic-device: Machine with 2 plane carriages at the crossb ... more

Año de construcción: 2001
Ubicación: Land-de DE 28816 Stuhr/Bremen - Germany, Gutenbergstr. 22
Vendedor: RDA Recycling Machinery GmbH

Shredder Vecoplan for wood waste type VAZ 100 / 80 U, year of construction 2001, drive power 11 kW, inlet width of 1000 x 800 mm, hours of operation 317 only Technical specifications: Manufacturer Vecoplan Maschinenfabrik, Bad Marienberg Type VAZ 100 / 80 U Year of construction 2001 Hours of operation 317 Motor nominal power 11 kW Inlet dimension 1000 x 800 mm Diameter of rotor 235 mm (circle of rotation) Rotor width 794 mm Rotor revolution speed 95 rpm Machine dimension 2200 x 1450 x 2050 mm (LxWxH) Weight approx. 1.400 kg User Manual Swedish language Please note: All technical data refer to specifications of producer/owner. We will not assume liability for the given sta ... more

Año de construcción: usado
Ubicación: Bünde bei Bielefeld
Vendedor: Plum & Partner Werkzeugmaschinen GmbH

working length: 75 m Working width: 330 mm Working height: 740 mm roll diameter: 48 mm Wheel width: 330 mm Well-maintained, belt-driven roller track system with steel rollers. Total length: approx. 75 meters, 25 individual elements per 3 meters, Width of the track 410 mm, 30 rollers per track. Since the system is dismantled, not all dimensions can be precisely determined. Equipment: 1 curvilinear element, 2 inclined conveyor belts, 2 hinged doors for the runway, 1 Packing table with the control panel. Machine dealer with own stock of 2500 m² and certification of the database Machineseeker. more

Año de construcción: 2015
Precio: 20.000 €
Ubicación: Land-de DE 58455 Witten, Voedestr. 40
Vendedor: Frau Nicole Sänger

Complete system from a hammer mill consisting of the following components Manufacturer: Cyrus Recklinghausen Year of construction / commissioning 11 / 2015 Vibrating / storage tray 1000/1500 x 2300 Conveyed goods: Blanks Round Ã? 24-42 mm Installation: Horinzontal on rubber hollow springs Filling weight: Maximum 4000 kg Pan width: 1000 / 1500 mm (conical trough) Gutter length: 2300 mm Power plant: 2 vibration motors 400 V, 50 Hz, IP65 at ca 1450 RPM Oscillation amplitude can be infinitely at a standstill The complete system is damage and been professionally dismantled ______________________________________________________________________ ________ ... more

Año de construcción: 1981
Precio: 5.700 €
Ubicación: Bünde bei Bielefeld
Vendedor: Plum & Partner Werkzeugmaschinen GmbH

bore capacity in steel (diameter): 80/110 mm arm length: 2515 mm workpiece height max.: 1800 mm spindle taper: MK 6 spindle turning speed range: 30, von 9 -1400 U/min feeds: 16, von 0,035 -2,8 mm/U max. distance bore spindle - base plate: 2200 mm stroke of the bore spindle: 475 mm drive drilling motor: 7,5 kW weight of the machine ca.: 10,8 t dimensions of the machine ca.: 4 x 1,4 x 3,63 m (LxBxH) Electric 380 Volt: Cooling equipment: With turning speed and feed value - preselection as well as automatic clamping. Disassembling costs for transportation in open top container: EUR 1000,--. In Europe transport with low loader possible without dismantling. The electric has to be checked because ... more

Año de construcción: 2015
Precio: 20.000 €
Ubicación: Land-de DE 58455 Witten, Voedestr. 40
Vendedor: Frau Nicole Sänger

Complete system from a hammer mill consisting of the following components Manufacturer Cyrus Recklinghausen Year of construction / commissioning 11 / 2015 Vibrating / storage tray 1000 / 1500 x 2300 Conveyed blanks Round Ã? 24-70 mm Square 45-70 mm Installation: Horinzontal on rubber hollow springs Filling weight: Maximum 4000 kg Pan width: 1000/1500 mm (conical trough) Gutter length: 2300 mm Power plant: 2 vibration motors 400 V, 50 Hz, IP65 at ca 1450 RPM Oscillation amplitude can be adjusted at standstill levels Los The complete system is damage and been professionally dismantled Allocation automatic CZIS 1850 acoustic version Conveyed b ... more

Año de construcción: 2013
Ubicación: ab Standort
Vendedor: Teutenberg Maschinen GmbH & Co.KG

diameter min.: 22 mm diameter max.: 65 mm TUBE WELDING MACHINE constr.: Seuthe type: RS 65 year of construction: 1964/2013 with new HF welding system - Elotherm type Eloweld 400 working range: tube-Ø 20 - 75 mm wall thickness 1 - 6 mm Control: Siemens S7 with double-sided end processing unit for tube lengths of 3.8 - 9.6 m Complete plant with one roller set for 65 mm tube-Ø. Total weight of this machine: approx. 80-100 tons Dismantling to be borne by the buyer. more

Año de construcción: 2002
Ubicación: AG 79002 Vynnyky, 7 Bor str
Vendedor: CC

the Tetra Pak TBA8 1000 Square filling line, manuf. in 2002. has 29.200 running hours, not dismantled. Completed by: - TBA/8-1000 Sq filler V110 - TCA88 Applicator - Easy Ride - wrap around Packer TCBP70 - conveyors - Domino inc printer Excellent condition more

Año de construcción: 2007
Ubicación: ab Standort
Vendedor: Teutenberg Maschinen GmbH & Co.KG

degree: 1100 internal dimension: L1800, B1800, H2125 mm Electric capacity: 150 kw BELL TYPE FURNACE Maximum operating temperature : 1100 °C Electrical power : 150KW Furnace power : 400V/ 50Hz 150KW Thermo elements: Ni-Cr-Ni 90.1101 300-400mm with flange adapter Heating groups: 1 group Heated sides: 4 sides Gas supply: Argon protective gas Work platforms: 2 platforms Weight of the hood: ca. 2000 Kg Isolation: ceramic fibre Density: 150-300Kg/m³ Layer thickness: 225mm (special Temp. 1260°C) Dimensions: 2350 mm X 2350 mm X 2500 mm L x W x H Chamber dimension: L=1800mm W=1800mm H=2125mm The furnace is in a very good condition. Dismantling of the machine to be borne by the buy ... more

Año de construcción: 1965
Ubicación: Land-ro RO
Vendedor: A-Pac

Stack type 4 color flexographic printing machine Model : Alina Year : 1965 Spec:- Number of Colors : Four (4) colors Printing Width : upto 1020 mm Printing Pitch : 310 – 710mmm Status : Dismantled – Machine under operation until June 2018 MFG : Windomoeller and Hoelscher • Cutting Gears 310-710mm, detail to be confirmed • Printing Cylinders: 32 pcs All machine or equipment is offered as is where is with all faults without warranty and is subject to prior sales. All information provided in this offer is from the source(s), which is/are deemed reliable and trusted. more

Año de construcción: 1998
Ubicación: Nürnberg
Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG

turning diameter: 700 mm swing diameter: 900 mm turning height: 800 mm control: SIN840D spindle turning speed - stepless: 0 - 1000 U/min max. torque on the spindle: max. 9167 Nm cross adjustment: X: 600 mm feed stepless: 0 - 6000 U/min rapid traverse: 13,00 m/min total power requirement: 115,00 kW weight of the machine ca.: 40,00 t dimensions of the machine ca.: 7,50 x 5,50 x H4,90 m Machine is dismanteled and can not be inspected under power. more

Año de construcción: usado
Precio: 1.900 €
Ubicación: Land-de DE
Vendedor: OCHMANN Holzbearbeitungsmaschinen

immediately available, self and the self dismantling special price: â?¬1.900,00 + VAT more

Año de construcción: 1971
Ubicación: ab Werksstandort,unter Strom
Vendedor: Kemmerich Werkzeugmaschinen GmbH

turning diameter over bed: 1420 mm turning diameter over slide: 1300 mm turning length: 8000 mm centre distance: 8500 mm faceplate diameter: 1100 mm travel of upper support: 500 mm workpiece weight max.: 45.000 kg centre height: 790 mm spindle turning speed range: 0,6 - 48,2 U/min power capacity: 110 kW weight of the machine ca.: 52 t dimensions of the machine ca.: m retrofited in 2006 by SUSTRAI The retrofitting consisted in the substitution of the electrical boards, and the saddle was fitted with servo-motors and ball-screw operated by FAGOR regulators. After this modification this machine it is still basically manual and was only used for roughing operations of BUR and Roughing work Rolls ... more

Año de construcción: 2008
Ubicación: Land-cn CN 0 SHANGHAI, 538-FUYUAN RD.BOSHAN DIST.
Vendedor: SHANGHAI HELM IMP.&EXP. LTD

We have complete TMT high tnenacity FDY yarn spinning lines for sale,manufactured in 2008,4ends winder.stopped and dismantled.good condition.Serious buyer contact me,please. more

Año de construcción: 2004
Ubicación: ab Lager Monheim am Rhein
Vendedor: Kemmerich Werkzeugmaschinen GmbH

x-travel: 1265 mm y-travel: 1350 mm z-travel: 628 mm spindle turning speed range: 12.000 U/min spindle motor: 26 kW tool taper: HSK-A 100 tool change unit: rapid traverse: 45 m/min Torque: Nm tool diameter: 140 mm tool length - max.: 350 mm weight of tools max.: 20 kg tool changing time: 7,5 sec b-axis: 0,001 ° size of pallet: 630 x 630 mm change time of pallets: 10 sec workpiece weight: 1000 kg Control: Siemens 840D total power requirement: 120 kW weight of the machine ca.: 35 t dimensions of the machine ca.: 5 x 6 x 3,3 m Horizontal Machining Center, Primarily used for the production of cylinder heads - CNC control Siemens Sinumerik 840 D - 2 Pallets - Tool Changer 45-fold (HSK-A 100) -  ... more

Año de construcción: 2003
Ubicación: Land-cn CN SHANGHAI
Vendedor: SHANGHAI HELM IMP.&EXP. LTD

We have 24 sets of Barmag ACW winders for sale,manufacturedin 2003,12 ends,chunk length 1380mm,these winder are dismantled from FDY lines.very good condition.Can be shipped immediatlly.Serious buyer contact me. more

Año de construcción: 2011
Ubicación: ab Lager NRW
Vendedor: Kemmerich Werkzeugmaschinen GmbH

turning diameter: 250 mm turning length: 1100 mm clamping length: 1290 mm Control: BoschRexroth Indramotion MTX tool taper: VDI 40 Main Spindle:: spindle head: A8 spindle turning speed - stepless: 5.500 U/min spindle motor: 48,3 / 37,7 kW max. torque on the spindle: 384 / 399 Nm c-axis: 0,001 ° rapid travel (x and z-axis): 40 m/min x-travel: 320 mm y-travel: +/- 50 mm z-travel: 1290 mm total power requirement: 120 kW weight of the machine ca.: 26 t dimensions of the machine ca.: 2,95 x 3,45 x 3,9 m The effective shaft lathing machine with C-axis. This machine can be used for maching crankshafts, camshafts, stub shafts, main and auxiliary shafts. equipped with: - CNC control BoschRexroth IN ... more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: