36 ofertas

Año de construcción: usado
Ubicación: Land-1 cnc lathe ctx 420 linear
circular diameter of 680 mm
swing over plan 565 mm
plan route x 260 mm
longitudinal stroke z 635 mm
bar passage 65 mm
10 spindle speed 5000 rpm
incl chuck
control siemens 840 d with reading-turn
c-axis
12 x discs revolver sauter with driven tools vdi 40
hollow clamping device of part of
spaennefoerderer
automatic tailstock
 1 CNC LATHE CTX 420 LINEAR CIRCULAR DIAMETER OF 680 MM SWING OVER PLAN 565 MM PLAN ROUTE X 260 MM LONGITUDINAL STROKE Z 635 MM BAR PASSAGE 65 MM 10 SPINDLE SPEED 5000 RPM INCL CHUCK CONTROL SIEMENS 840 D WITH READING-TURN C-AXIS 12 X DISCS REVOLVER SAUTER WITH DRIVEN TOOLS VDI 40 HOLLOW CLAMPING DEVICE OF PART OF SPAENNEFOERDERER AUTOMATIC TAILSTOCK
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>control: siemens 840 d <br/>turning length: 300 mm<br/>dimensions (l x w x h) approx.: 5050 x 3050 x 2500 mm<br/>number of places for driven tools: 2 x 12 <br/>toolchanger positions: 2 x 12 <br/>turning speed range: 20 - 5000 rpm<br/>tool taper: vdi 30 <br/>total power requirement: 26/ 21 kw kw<br/>description: machine number 07400001291<br> <br> <b>working range</b><br> swing over bed: 250 mm<br> turning diameter over face plate: 120 mm<br> center distance: 900 mm<br> cross travel/ longitudinal travel carriage top: 300/650 mm<br> vertical travel carriage up +/- 40mm<br> cross travel/ longitudinal travel carriage bottom: 180/650 mm<br> longitudinal travel spindle 2: 670 mm<br> cross travel spindle 2: 175 mm<br> <br> operating hours 92161 hrs<br> spindle hours 34376 hrs<br> <br> <br> machine has been reconditioned and equipped with the following new components:<br> central lubrication pump mkf1-kw2-200 skf single-duct pump,<br> ncu 561.2/571/571.2/... ncu 572/572.2/573.2 incl. network device, battery and fan s.nr.: st-r82005709<br> <br> machine was previously operated with gantry loader, this is not included!<br> control must be reprogrammed accordingly! WEIGHT APPROX.: 10000 KG
CONTROL: SIEMENS 840 D
TURNING LENGTH: 300 MM
DIMENSIONS (L X W X H) APPROX.: 5050 X 3050 X 2500 MM
NUMBER OF PLACES FOR DRIVEN TOOLS: 2 X 12
TOOLCHANGER POSITIONS: 2 X 12
TURNING SPEED RANGE: 20 - 5000 RPM
TOOL TAPER: VDI 30
TOTAL POWER REQUIREMENT: 26/ 21 KW KW
DESCRIPTION: MACHINE NUMBER 07400001291

WORKING RANGE
SWING OVER BED: 250 MM
TURNING DIAMETER OVER FACE PLATE: 120 MM
CENTER DISTANCE: 900 MM
CROSS TRAVEL/ LONGITUDINAL TRAVEL CARRIAGE TOP: 300/650 MM
VERTICAL TRAVEL CARRIAGE UP +/- 40MM
CROSS TRAVEL/ LONGITUDINAL TRAVEL CARRIAGE BOTTOM: 180/650 MM
LONGITUDINAL TRAVEL SPINDLE 2: 670 MM
CROSS TRAVEL SPINDLE 2: 175 MM

OPERATING HOURS 92161 HRS
SPINDLE HOURS 34376 HRS


MACHINE HAS BEEN RECONDITIONED AND EQUIPPED WITH THE FOLLOWING NEW COMPONENTS:
CENTRAL LUBRICATION PUMP MKF1-KW2-200 SKF SINGLE-DUCT PUMP,
NCU 561.2/571/571.2/... NCU 572/572.2/573.2 INCL. NETWORK DEVICE, BATTERY AND FAN S.NR.: ST-R82005709

MACHINE WAS PREVIOUSLY OPERATED WITH GANTRY LOADER, THIS IS NOT INCLUDED!
CONTROL MUST BE REPROGRAMMED ACCORDINGLY!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-turning-milling center

suitable machine for medium and large series

manufacturer: dmg gildemeister type: msl 42/7
year of build: 2009 control: fanuc
chuck diameter: collet chuck spindle passage: 42 mm speed range from - to: 4000-5000 u/min

facilities
axes: 7 driven tools: yes hollow clamping device: yes chip conveyor: yes
	
accessories:

bar feeder
tool

spindle hours: 29.531
power-on hours: 35.903

good condition!

only brass processing.

video available.

delivery time approx. mid april 2019

errors excepted.

TURNING-MILLING CENTER SUITABLE MACHINE FOR MEDIUM AND LARGE SERIES MANUFACTURER: DMG GILDEMEISTER TYPE: MSL 42/7 YEAR OF BUILD: 2009 CONTROL: FANUC CHUCK DIAMETER: COLLET CHUCK SPINDLE PASSAGE: 42 MM SPEED RANGE FROM - TO: 4000-5000 U/MIN FACILITIES AXES: 7 DRIVEN TOOLS: YES HOLLOW CLAMPING DEVICE: YES CHIP CONVEYOR: YES ACCESSORIES: BAR FEEDER TOOL SPINDLE HOURS: 29.531 POWER-ON HOURS: 35.903 GOOD CONDITION! ONLY BRASS PROCESSING. VIDEO AVAILABLE. DELIVERY TIME APPROX. MID APRIL 2019 ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 420 mm<br/>turning length: 1000 mm<br/>control: epl <br/><br/><br/><br/><br/> TURNING DIAMETER: 420 MM
TURNING LENGTH: 1000 MM
CONTROL: EPL




Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 190.000 €
Ubicación: Land-type of machine cnc turning and milling center make gildemeister type ctx gamma 2000 tc year 2009 cnc control type storage location france country of origin germany delivery after agreement cargo base free truck of verladem technical details
swing 700 mm turning diameter 600 mm turning length 1300 mm spindle speeds 500 rpm spindle bore 102 mm control siemens 840 dsl shop turn power 52 kw total power demand 70 kw machine weight 18.5 tons of space approx. 7 x 3 x 1.8 m lot zub ehã¶r, bezel
 tools capto c6 fold magazine 36
 c-axis and b-axis + y axis simultaneous
 milling spindle with 36 compartment capto halter system and 12000 rpm lunette smw klu 220 12 to 101 mm
 high pressure pump 20 bars with paper band filter
 spaenefoerderere TYPE OF MACHINE CNC TURNING AND MILLING CENTER MAKE GILDEMEISTER TYPE CTX GAMMA 2000 TC YEAR 2009 CNC CONTROL TYPE STORAGE LOCATION FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY AFTER AGREEMENT CARGO BASE FREE TRUCK OF VERLADEM TECHNICAL DETAILS SWING 700 MM TURNING DIAMETER 600 MM TURNING LENGTH 1300 MM SPINDLE SPEEDS 500 RPM SPINDLE BORE 102 MM CONTROL SIEMENS 840 DSL SHOP TURN POWER 52 KW TOTAL POWER DEMAND 70 KW MACHINE WEIGHT 18.5 TONS OF SPACE APPROX. 7 X 3 X 1.8 M LOT ZUB EH&ATILDE;&PARA;R, BEZEL TOOLS CAPTO C6 FOLD MAGAZINE 36 C-AXIS AND B-AXIS + Y AXIS SIMULTANEOUS MILLING SPINDLE WITH 36 COMPARTMENT CAPTO HALTER SYSTEM AND 12000 RPM LUNETTE SMW KLU 220 12 TO 101 MM HIGH PRESSURE PUMP 20 BARS WITH PAPER BAND FILTER SPAENEFOERDERERE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter: 324 mm<br/>turning length: 600 mm<br/>control: heidenhain <br/>chuck: 210 mm<br/>chuck: 150 mm<br/>turning speeds: 5000 u/min<br/>turning speeds: 2000 u/min<br/>tool change unit: 12 <br/>bar loader: lod lns <br/>type: quick load servo 3<br/>length: 1500 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER: 324 MM
TURNING LENGTH: 600 MM
CONTROL: HEIDENHAIN
CHUCK: 210 MM
CHUCK: 150 MM
TURNING SPEEDS: 5000 U/MIN
TURNING SPEEDS: 2000 U/MIN
TOOL CHANGE UNIT: 12
BAR LOADER: LOD LNS
TYPE: QUICK LOAD SERVO 3
LENGTH: 1500 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: dmg type: ctx 450 eco v3
year of constr.: 2014 control: siemens 840 d swing above bed: 650 mm travel plan: 267 mm
longitudinal travel: 600 mm
speed range from - until:-4000 rpm
approximate weight: 5,800 kg equipment
axles: 3 driven tools: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

accessories:

rod package + interface
workpiece pick-up facility
connecting rod loader
bar passage diameter. 65

subject to error and sale.			
			
 MANUFACTURER: DMG TYPE: CTX 450 ECO V3 YEAR OF CONSTR.: 2014 CONTROL: SIEMENS 840 D SWING ABOVE BED: 650 MM TRAVEL PLAN: 267 MM LONGITUDINAL TRAVEL: 600 MM SPEED RANGE FROM - UNTIL:-4000 RPM APPROXIMATE WEIGHT: 5,800 KG EQUIPMENT AXLES: 3 DRIVEN TOOLS: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES ACCESSORIES: ROD PACKAGE + INTERFACE WORKPIECE PICK-UP FACILITY CONNECTING ROD LOADER BAR PASSAGE DIAMETER. 65 SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-spindle passage: 79 mm<br/>control: siemens 840d<br/>turning diameter: 250 mm<br/>swing diameter: 320 mm<br/>turning height: 250 mm<br/>rapid traverse x-axis: 100 m/min<br/>spindle turning speed range: 20-5000 u/min<br/>main drive motor: 21 kw<br/>rapid traverse z-axis: 45 m/min<br/>weight of the machine ca.: ca. 7.5 t<br/><br/><br/><br/><br/> SPINDLE PASSAGE: 79 MM
CONTROL: SIEMENS 840D
TURNING DIAMETER: 250 MM
SWING DIAMETER: 320 MM
TURNING HEIGHT: 250 MM
RAPID TRAVERSE X-AXIS: 100 M/MIN
SPINDLE TURNING SPEED RANGE: 20-5000 U/MIN
MAIN DRIVE MOTOR: 21 KW
RAPID TRAVERSE Z-AXIS: 45 M/MIN
WEIGHT OF THE MACHINE CA.: CA. 7.5 T




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-machining center vertical manufacturer: dmg
type: ecomill 1035 v
construction year: 2014
control: siemens 840 d
axles: 3
procedures:
x: 1035
y: 560
z: 510

speed: 10,000 rpm.
chip conveyor: yes
internal coolant supply: yes
weight: ca. 6 000 kg

accessories:

electronic handwheel
renishaw measuring sensor kit
direct measuring system

errors excepted			            
	           		                      
 MACHINING CENTER VERTICAL MANUFACTURER: DMG TYPE: ECOMILL 1035 V CONSTRUCTION YEAR: 2014 CONTROL: SIEMENS 840 D AXLES: 3 PROCEDURES: X: 1035 Y: 560 Z: 510 SPEED: 10,000 RPM. CHIP CONVEYOR: YES INTERNAL COOLANT SUPPLY: YES WEIGHT: CA. 6 000 KG ACCESSORIES: ELECTRONIC HANDWHEEL RENISHAW MEASURING SENSOR KIT DIRECT MEASURING SYSTEM ERRORS EXCEPTED
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 320 mm<br/>turning length: 600 mm<br/>control: siemens 840d shop turn<br/>swing diameter: 505 mm<br/>weight of the machine ca.: 4,5 t<br/>dimensions of the machine ca.: 4,3 x 1,8 x 1,8 m<br/>cnc lathe dmg deckel maho gildemeister ctx 410<br/>year built: 2003<br/>control: siemens sinumerik 840d shop turn<br/>under power: 32,755<br/>spindle hours: 15932<br/><br/>main spindle<br/>--------------------<br/>speed ??range - main spindle max. 5,000 min / -1<br/>drive power - main spindle: 21 kw<br/>max. torque: 240 nm<br/>spindle diameter in the front. bearing: 130 mm<br/>spindle bore: 87 mm<br/>chuck diameter: 21 mm<br/>hollow clamping cylinder<br/><br/>tool carrier<br/>--------------------<br/>places: 12<br/>driven. tools: 12<br/>interface: vdi30<br/><br/>tailstock<br/>---------------------<br/>tailstock: 580mm<br/>tailstock force: 8 kn<br/>center point: mk4<br/>quill diameter: 120mm<br/>quill: 150mm<br/><br/>coolant system<br/>-------------------<br/>175l<br/>flow rate at 6bar: 30l / min<br/><br/>domestic equipments<br/>--------------------<br/>chip conveyor<br/>werkzeugmessarm<br/><br/><br/><br/><br/> TURNING DIAMETER: 320 MM
TURNING LENGTH: 600 MM
CONTROL: SIEMENS 840D SHOP TURN
SWING DIAMETER: 505 MM
WEIGHT OF THE MACHINE CA.: 4,5 T
DIMENSIONS OF THE MACHINE CA.: 4,3 X 1,8 X 1,8 M
CNC LATHE DMG DECKEL MAHO GILDEMEISTER CTX 410
YEAR BUILT: 2003
CONTROL: SIEMENS SINUMERIK 840D SHOP TURN
UNDER POWER: 32,755
SPINDLE HOURS: 15932

MAIN SPINDLE
--------------------
SPEED ??RANGE - MAIN SPINDLE MAX. 5,000 MIN / -1
DRIVE POWER - MAIN SPINDLE: 21 KW
MAX. TORQUE: 240 NM
SPINDLE DIAMETER IN THE FRONT. BEARING: 130 MM
SPINDLE BORE: 87 MM
CHUCK DIAMETER: 21 MM
HOLLOW CLAMPING CYLINDER

TOOL CARRIER
--------------------
PLACES: 12
DRIVEN. TOOLS: 12
INTERFACE: VDI30

TAILSTOCK
---------------------
TAILSTOCK: 580MM
TAILSTOCK FORCE: 8 KN
CENTER POINT: MK4
QUILL DIAMETER: 120MM
QUILL: 150MM

COOLANT SYSTEM
-------------------
175L
FLOW RATE AT 6BAR: 30L / MIN

DOMESTIC EQUIPMENTS
--------------------
CHIP CONVEYOR
WERKZEUGMESSARM




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-control siemens sinumerik 840d powerline
turning diameter 200 mm
bar diameter 65 mm
spindle speeds 5,000 min-1
counter spindle
2 x 12-station turret with driven tools
y / b axis
tailstock
parts conveyor
suction
chip conveyor
bar loaderkupa CONTROL SIEMENS SINUMERIK 840D POWERLINE TURNING DIAMETER 200 MM BAR DIAMETER 65 MM SPINDLE SPEEDS 5,000 MIN-1 COUNTER SPINDLE 2 X 12-STATION TURRET WITH DRIVEN TOOLS Y / B AXIS TAILSTOCK PARTS CONVEYOR SUCTION CHIP CONVEYOR BAR LOADERKUPA
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>turning length: 300 mm<br/>control: siemens 840d sl <br/>cnc 2-axis universal turning machine<br/>dmg gildemeister ctx alpha 300 v3<br/>year of construction: 2010 (new machine, never in use).<br/>hours of operation: 182h<br/>spindle hours: 28h<br/><br/>control:<br/>--------------------<br/>siemens 840d solution with shopturn<br/><br/>working area:<br/>--------------------<br/>max. turning diameter: 200 mm<br/>spindle bore: 73 mm<br/>plan distance (x): 190 mm<br/>max. workpiece length for tailstock (machinable): 335 mm<br/>speed max. 6000 rpm<br/><br/>equipment:<br/>--------------------<br/>manual chuck<br/>c-axis<br/>sauter revolver with 12 stations all powered<br/>tool holder vdi 30<br/>tailstock with hydraulic positioning, manually adjustable<br/>hollow clamping device<br/>direct measuring system<br/>tool gauging device, manually swivellable<br/>component probe renishaw mp 400<br/>colant pistol<br/>jigk power coolant system<br/>chip tray<br/>package for tropical climate for ambient temperature of max. 40°<br/><br/>weight approx. 3,800 kg<br/><br/>further information:<br/>--------------------<br/>machine and chip tray raised 100mm from the floor<br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
TURNING LENGTH: 300 MM
CONTROL: SIEMENS 840D SL
CNC 2-AXIS UNIVERSAL TURNING MACHINE
DMG GILDEMEISTER CTX ALPHA 300 V3
YEAR OF CONSTRUCTION: 2010 (NEW MACHINE, NEVER IN USE).
HOURS OF OPERATION: 182H
SPINDLE HOURS: 28H

CONTROL:
--------------------
SIEMENS 840D SOLUTION WITH SHOPTURN

WORKING AREA:
--------------------
MAX. TURNING DIAMETER: 200 MM
SPINDLE BORE: 73 MM
PLAN DISTANCE (X): 190 MM
MAX. WORKPIECE LENGTH FOR TAILSTOCK (MACHINABLE): 335 MM
SPEED MAX. 6000 RPM

EQUIPMENT:
--------------------
MANUAL CHUCK
C-AXIS
SAUTER REVOLVER WITH 12 STATIONS ALL POWERED
TOOL HOLDER VDI 30
TAILSTOCK WITH HYDRAULIC POSITIONING, MANUALLY ADJUSTABLE
HOLLOW CLAMPING DEVICE
DIRECT MEASURING SYSTEM
TOOL GAUGING DEVICE, MANUALLY SWIVELLABLE
COMPONENT PROBE RENISHAW MP 400
COLANT PISTOL
JIGK POWER COOLANT SYSTEM
CHIP TRAY
PACKAGE FOR TROPICAL CLIMATE FOR AMBIENT TEMPERATURE OF MAX. 40°

WEIGHT APPROX. 3,800 KG

FURTHER INFORMATION:
--------------------
MACHINE AND CHIP TRAY RAISED 100MM FROM THE FLOOR




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land-cnc turning / milling center
manufacturer: gildemeister
type: gmx 400
year of construction: 2008
control: siemens 840 d powerline
swing above bed: 640
plan travel: 1500
spindle bore: 107
power: 100% 36 kw, 40% 45 kw
speed range: up to 4,000

turning/milling spindle rpm: 12.000 rpm
main spindle spindle diameter: nc tailstock: quill mk 5 tool magazine: 120:.

facilities:
tool carrier above: - with turning and milling spindle as the motor spindle.
-recording capto6 7 axis: spindle: with hollow clamping device 68 mm
 
sub-spindle: with spindle motor ism 65
                                                                       -power 25/37 kw - part hollow clamping cylinder 635 mm deep (hydraulic) 
                                                                       -train tube diameter 68 mm
                                                                       -c axis and spindle brake (hydraulic) additional magazine about the counter spindle: - with 3 tool stations max d = 88 m x 600 mm lg.

tool monitoring system:-company of artis, type ctm high pressure coolant unit 8/28/80 - 8 bar, 20 l/min turning/milling outside.
                                                                      -20 bar, 40l / min & 80 bar, 11 l / min turning/milling spindle inside.
                                                                       -8 bar, 20l / min & 20 bar, 40 l/min for the revolver. 
                                                                       - or 8 bar, 20l / min for the bezel
-via m-function can be selected. 
-coolant tank 980 litres
-band filter system filter unit 40 âµm - immersion cooler 4,5 kw - level monitoring chip conveyor: - scratch version indicator: - 3 x, colored coolant spray gun :

-automatic schiebeschutztã¼ren:-(firma landert)

oil mist separator ifs:-type ife

differential pressure for main spindle

differential pressure for the counter spindle

overload clutches x 1, ys, x 2, z2

conveyor belt for finished parts, promoting to the right, with plastic coating.

connector for bar feeder or bar feeder errors excepted.
 
	
			

 CNC TURNING / MILLING CENTER MANUFACTURER: GILDEMEISTER TYPE: GMX 400 YEAR OF CONSTRUCTION: 2008 CONTROL: SIEMENS 840 D POWERLINE SWING ABOVE BED: 640 PLAN TRAVEL: 1500 SPINDLE BORE: 107 POWER: 100% 36 KW, 40% 45 KW SPEED RANGE: UP TO 4,000 TURNING/MILLING SPINDLE RPM: 12.000 RPM MAIN SPINDLE SPINDLE DIAMETER: NC TAILSTOCK: QUILL MK 5 TOOL MAGAZINE: 120:. FACILITIES: TOOL CARRIER ABOVE: - WITH TURNING AND MILLING SPINDLE AS THE MOTOR SPINDLE. -RECORDING CAPTO6 7 AXIS: SPINDLE: WITH HOLLOW CLAMPING DEVICE 68 MM SUB-SPINDLE: WITH SPINDLE MOTOR ISM 65 -POWER 25/37 KW - PART HOLLOW CLAMPING CYLINDER 635 MM DEEP (HYDRAULIC) -TRAIN TUBE DIAMETER 68 MM -C AXIS AND SPINDLE BRAKE (HYDRAULIC) ADDITIONAL MAGAZINE ABOUT THE COUNTER SPINDLE: - WITH 3 TOOL STATIONS MAX D = 88 M X 600 MM LG. TOOL MONITORING SYSTEM:-COMPANY OF ARTIS, TYPE CTM HIGH PRESSURE COOLANT UNIT 8/28/80 - 8 BAR, 20 L/MIN TURNING/MILLING OUTSIDE. -20 BAR, 40L / MIN & 80 BAR, 11 L / MIN TURNING/MILLING SPINDLE INSIDE. -8 BAR, 20L / MIN & 20 BAR, 40 L/MIN FOR THE REVOLVER. - OR 8 BAR, 20L / MIN FOR THE BEZEL -VIA M-FUNCTION CAN BE SELECTED. -COOLANT TANK 980 LITRES -BAND FILTER SYSTEM FILTER UNIT 40 &ACIRC;&MICRO;M - IMMERSION COOLER 4,5 KW - LEVEL MONITORING CHIP CONVEYOR: - SCRATCH VERSION INDICATOR: - 3 X, COLORED COOLANT SPRAY GUN : -AUTOMATIC SCHIEBESCHUTZT&ATILDE;&FRAC14;REN:-(FIRMA LANDERT) OIL MIST SEPARATOR IFS:-TYPE IFE DIFFERENTIAL PRESSURE FOR MAIN SPINDLE DIFFERENTIAL PRESSURE FOR THE COUNTER SPINDLE OVERLOAD CLUTCHES X 1, YS, X 2, Z2 CONVEYOR BELT FOR FINISHED PARTS, PROMOTING TO THE RIGHT, WITH PLASTIC COATING. CONNECTOR FOR BAR FEEDER OR BAR FEEDER ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 880 mm<br/>y-travel: 630 mm<br/>z-travel: 630 mm<br/>control: heidenhain millplus it v <br/>tool change unit: 32-fach <br/>tool taper: sk 40 <br/>spindle turning speed range: 12.000 u/min<br/>b-axis: schwenkkopf 0,001 °<br/>c-axis: 0-360°  rundtisch 0,001° <br/>coolant: ja, 40 bar ikz <br/>rotary table dia.: 700 mm<br/>deckel maho gildemeister dmu 80t monoblock<br/>compact 5-axis machining center with large travel distances. 12,000 spindle<br/>and icz.<br/>machine is currently completely overhauled.<br/>the overhaul includes:<br/>- complete disassembly and cleaning of the machine, incl<br/>components (also stands)<br/>- exchange of all linear guides and wagons<br/>- replacement of all ball screw drives (z new, x and y overhauled)<br/>- replacement of the entire ball circulating spindle bearings<br/>- overhaul of the motor spindle (bearing, tensioner, balancing, etc.)<br/>- exchange of all sensors and cables at the tool changer<br/>- exchange of various coolant hoses<br/>- replace all pu lubrication lines<br/>- exchange of all drive belts<br/>- replacement of all wrinkles, wipers, brushes, etc.<br/>- replacing the sight glass<br/>- overhaul rotoclear (new drive and disc)<br/>- new keyboard millplus it<br/>- new softkey buttons monitor<br/>- product overhaul of the supply and drive modules<br/>- overhaul of all 5 measuring systems<br/>- new workroom lighting<br/>- replacement of hydraulic pressure blower<br/>- replacement of all pneumatic valves<br/>- exchange of all equipment<br/>- replace the protective hose on the milling head and round table<br/>- 2k coating in titangrau / weiss (current dmg design)<br/>- update the software version<br/>as you can see, this is not a real overhaul<br/>a repair. you can contact us and the machine in advance<br/>convince.<br/>machine is sold with 3 months warranty on the exchanged parts!<br/><br/><br/><br/><br/> X-TRAVEL: 880 MM
Y-TRAVEL: 630 MM
Z-TRAVEL: 630 MM
CONTROL: HEIDENHAIN MILLPLUS IT V
TOOL CHANGE UNIT: 32-FACH
TOOL TAPER: SK 40
SPINDLE TURNING SPEED RANGE: 12.000 U/MIN
B-AXIS: SCHWENKKOPF 0,001 °
C-AXIS: 0-360° RUNDTISCH 0,001°
COOLANT: JA, 40 BAR IKZ
ROTARY TABLE DIA.: 700 MM
DECKEL MAHO GILDEMEISTER DMU 80T MONOBLOCK
COMPACT 5-AXIS MACHINING CENTER WITH LARGE TRAVEL DISTANCES. 12,000 SPINDLE
AND ICZ.
MACHINE IS CURRENTLY COMPLETELY OVERHAULED.
THE OVERHAUL INCLUDES:
- COMPLETE DISASSEMBLY AND CLEANING OF THE MACHINE, INCL
COMPONENTS (ALSO STANDS)
- EXCHANGE OF ALL LINEAR GUIDES AND WAGONS
- REPLACEMENT OF ALL BALL SCREW DRIVES (Z NEW, X AND Y OVERHAULED)
- REPLACEMENT OF THE ENTIRE BALL CIRCULATING SPINDLE BEARINGS
- OVERHAUL OF THE MOTOR SPINDLE (BEARING, TENSIONER, BALANCING, ETC.)
- EXCHANGE OF ALL SENSORS AND CABLES AT THE TOOL CHANGER
- EXCHANGE OF VARIOUS COOLANT HOSES
- REPLACE ALL PU LUBRICATION LINES
- EXCHANGE OF ALL DRIVE BELTS
- REPLACEMENT OF ALL WRINKLES, WIPERS, BRUSHES, ETC.
- REPLACING THE SIGHT GLASS
- OVERHAUL ROTOCLEAR (NEW DRIVE AND DISC)
- NEW KEYBOARD MILLPLUS IT
- NEW SOFTKEY BUTTONS MONITOR
- PRODUCT OVERHAUL OF THE SUPPLY AND DRIVE MODULES
- OVERHAUL OF ALL 5 MEASURING SYSTEMS
- NEW WORKROOM LIGHTING
- REPLACEMENT OF HYDRAULIC PRESSURE BLOWER
- REPLACEMENT OF ALL PNEUMATIC VALVES
- EXCHANGE OF ALL EQUIPMENT
- REPLACE THE PROTECTIVE HOSE ON THE MILLING HEAD AND ROUND TABLE
- 2K COATING IN TITANGRAU / WEISS (CURRENT DMG DESIGN)
- UPDATE THE SOFTWARE VERSION
AS YOU CAN SEE, THIS IS NOT A REAL OVERHAUL
A REPAIR. YOU CAN CONTACT US AND THE MACHINE IN ADVANCE
CONVINCE.
MACHINE IS SOLD WITH 3 MONTHS WARRANTY ON THE EXCHANGED PARTS!




Vendedor: 5X Machines GmbH
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land- 
machine type cnc lathe - inclined bed machine make gildemeister type nef 400 year 2008 control type cnc storage haguenau country of origin germany delivery immediately cargo base stock haguenau france technical details

turning diameter 350/270 mm turning length 700 mm control heidenhain swing over bed cover max 400 mm traverse path - z 700 mm spindle bore 65 mm spindle speeds max. 4000 rpm tool holder vdi 30 turret head 12 pos. 
three jaw chuck diameter 200 mm spindle retainer a6 din55026 taper in the tailstock quill mk 3 power of 15/12 kw operating voltage 400 v machine weight approx. 3.0 t additional information

2 axis machine
 wiht cnc heidenhain - vdi 30 tool holder ca 8 stucco - coolant system spaenefoerderer
 3 jaw chuck dia 250 mm 52 mm arbeloa in the spindle
 tool measurement under power  MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE NEF 400 YEAR 2008 CONTROL TYPE CNC STORAGE HAGUENAU COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS TURNING DIAMETER 350/270 MM TURNING LENGTH 700 MM CONTROL HEIDENHAIN SWING OVER BED COVER MAX 400 MM TRAVERSE PATH - Z 700 MM SPINDLE BORE 65 MM SPINDLE SPEEDS MAX. 4000 RPM TOOL HOLDER VDI 30 TURRET HEAD 12 POS. THREE JAW CHUCK DIAMETER 200 MM SPINDLE RETAINER A6 DIN55026 TAPER IN THE TAILSTOCK QUILL MK 3 POWER OF 15/12 KW OPERATING VOLTAGE 400 V MACHINE WEIGHT APPROX. 3.0 T ADDITIONAL INFORMATION 2 AXIS MACHINE WIHT CNC HEIDENHAIN - VDI 30 TOOL HOLDER CA 8 STUCCO - COOLANT SYSTEM SPAENEFOERDERER 3 JAW CHUCK DIA 250 MM 52 MM ARBELOA IN THE SPINDLE TOOL MEASUREMENT UNDER POWER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter: 250 mm<br/>swing diameter: 320 mm<br/>turning height: 250 mm<br/>control: siemens 840d<br/>rapid traverse x-axis: 100 m/min<br/>rapid traverse z-axis: 45 m/min<br/>spindle diameter in front bearing: 120 mm<br/>torque: 210 nm<br/>number of spindle speeds: 20- 5.000 u/min<br/>tool turret: 12 -fach<br/>number of working hours: 73949 h<br/>spindle hours: 25814 h<br/>total power requirement: 50 kw<br/>weight of the machine ca.: 9 t<br/>dimensions of the machine ca.: 5 x 6 x 3 m<br/>vertical lathe gildemeister ctv 250 v4<br/>c-axis<br/>number of driven tool station: 12<br/>parts conveyor ewab<br/><br/><br/><br/><br/> TURNING DIAMETER: 250 MM
SWING DIAMETER: 320 MM
TURNING HEIGHT: 250 MM
CONTROL: SIEMENS 840D
RAPID TRAVERSE X-AXIS: 100 M/MIN
RAPID TRAVERSE Z-AXIS: 45 M/MIN
SPINDLE DIAMETER IN FRONT BEARING: 120 MM
TORQUE: 210 NM
NUMBER OF SPINDLE SPEEDS: 20- 5.000 U/MIN
TOOL TURRET: 12 -FACH
NUMBER OF WORKING HOURS: 73949 H
SPINDLE HOURS: 25814 H
TOTAL POWER REQUIREMENT: 50 KW
WEIGHT OF THE MACHINE CA.: 9 T
DIMENSIONS OF THE MACHINE CA.: 5 X 6 X 3 M
VERTICAL LATHE GILDEMEISTER CTV 250 V4
C-AXIS
NUMBER OF DRIVEN TOOL STATION: 12
PARTS CONVEYOR EWAB




Vendedor: 5X Machines GmbH
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1997 control type cnc storage haguenau country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1500 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information 
grundig heidenhain manual plus control MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1997 CONTROL TYPE CNC STORAGE HAGUENAU COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1500 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-<br>table length: 3100 mm<br>table width: 900 mm<br>longitudinal x: 2500 mm<br>cross y: 900 mm<br>vertical z: 800 mm<br>positions atc: 30  <br>positions apc: 0  <br>cnc brand: heidenhain<br>cnc model: itnc 530 <br><p>make   dmg</p>
<p>type    250 linear</p>
<p>year   2004</p>
<p>specifications</p>
<p>x - travel   2500 mm</p>
<p>y - travel   900 mm</p>
<p>z - travel    800 mm</p>
<p>controll   itnc 530</p>
<p>table length x width   3100 x 900 mm</p>
<p>table load in kg    3000 kg</p>
<p>spindle taper    hsk 63   </p>
<p>kw power on spindle   35 kw</p>
<p>spindle speeds / ranges   18.000 rpm</p>
<p>atc tool changer    30</p>
<p>coolant true spindle / bar   17 bar</p>
<p>number off controlled axis 5</p>
<p>cnc automatic milling head / gr.0.001 gr</p>
<p>dimensions</p>
<p>length   6500 mm</p>
<p>width    3000 mm</p>
<p>height   3000 mm</p>
<p> 
TABLE LENGTH: 3100 MM
TABLE WIDTH: 900 MM
LONGITUDINAL X: 2500 MM
CROSS Y: 900 MM
VERTICAL Z: 800 MM
POSITIONS ATC: 30  
POSITIONS APC: 0  
CNC BRAND: HEIDENHAIN
CNC MODEL: ITNC 530

MAKE&NBSP; &NBSP;DMG

TYPE&NBSP; &NBSP; 250 LINEAR

YEAR&NBSP; &NBSP;2004

SPECIFICATIONS

X - TRAVEL&NBSP; &NBSP;2500 MM

Y - TRAVEL&NBSP; &NBSP;900 MM

Z - TRAVEL&NBSP; &NBSP; 800 MM

CONTROLL&NBSP; &NBSP;ITNC 530

TABLE LENGTH X WIDTH&NBSP; &NBSP;3100 X 900 MM

TABLE LOAD IN KG&NBSP; &NBSP; 3000 KG

SPINDLE TAPER&NBSP; &NBSP; HSK 63&NBSP; &NBSP;

KW POWER ON SPINDLE&NBSP; &NBSP;35 KW

SPINDLE SPEEDS / RANGES&NBSP; &NBSP;18.000 RPM

ATC TOOL CHANGER&NBSP; &NBSP; 30

COOLANT TRUE SPINDLE / BAR&NBSP; &NBSP;17 BAR

NUMBER OFF CONTROLLED AXIS 5

CNC AUTOMATIC MILLING HEAD / GR.0.001 GR

DIMENSIONS

LENGTH&NBSP; &NBSP;6500 MM

WIDTH&NBSP; &NBSP; 3000 MM

HEIGHT&NBSP; &NBSP;3000 MM

&NBSP;

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-lid maho dmu 80p universal milling machine with automatic swivel head and tool changer

manufacturers cover maho
year of construction 1997

control
name 3d control heidenhain tnc 620 hsci
manufacturer heidenhain
type/type 3d control

technical data
feed longitudinal/transverse/vertical 10000/10000/10000 mm / min
rapid traverse longitudinal/transverse/vertical 24/24/24 m / min

work area 1
length 800 mm
across 700 mm
vertical 600 mm

space/weight
dimensions approx. (width x depth x height) (6.3 x 6.5 x 2.7) 5.0 x 6.5 x 2.7 m
weight approximately 10700 kg

miscellaneous
clamping system din 69872

tool changer
use universal
magazine type chain
tool changer level vertical
gripper type double gripper

facilities:
automatic swivel head
universal milling head: automatic conversion from vertical to horizontal machining
motor spindle 12000 1/min

drive type ac
drive power (100% ed) 10 kw
drive power (40% ed) 15 kw
revs - up - 12000 rpm
toolholder sk 40 acc. to din 69871

nc rotary table ã? 900 x 630 mm
table size 900 x 630 mm
centering bore 50 h 6 mm
permissible load (table center) 800 kg
keyway width 14 h 7 mm
number of grooves 9
distance of t-grooves 63 mm
rotation speed max 4 axle 11 u/min
4th axis (swivelling range) 360 x 0.001 degrees

full cab

tool magazine, chain, 60 pl.
tool magazine chains magazine magazine 60-seat sk 40 or optionally selected
tool holders

probe infrared heidenhain
probe infrared serial. heidenhain ts 631

internal coolant through federal (b) prod.-package 40 bar / 23 l / min, form b
production package 23 l / min (theor. and 40 bar pump capacity) tank 600 l, rotating visor,

band conveyors ikz by federal (b)

LID MAHO DMU 80P UNIVERSAL MILLING MACHINE WITH AUTOMATIC SWIVEL HEAD AND TOOL CHANGER MANUFACTURERS COVER MAHO YEAR OF CONSTRUCTION 1997 CONTROL NAME 3D CONTROL HEIDENHAIN TNC 620 HSCI MANUFACTURER HEIDENHAIN TYPE/TYPE 3D CONTROL TECHNICAL DATA FEED LONGITUDINAL/TRANSVERSE/VERTICAL 10000/10000/10000 MM / MIN RAPID TRAVERSE LONGITUDINAL/TRANSVERSE/VERTICAL 24/24/24 M / MIN WORK AREA 1 LENGTH 800 MM ACROSS 700 MM VERTICAL 600 MM SPACE/WEIGHT DIMENSIONS APPROX. (WIDTH X DEPTH X HEIGHT) (6.3 X 6.5 X 2.7) 5.0 X 6.5 X 2.7 M WEIGHT APPROXIMATELY 10700 KG MISCELLANEOUS CLAMPING SYSTEM DIN 69872 TOOL CHANGER USE UNIVERSAL MAGAZINE TYPE CHAIN TOOL CHANGER LEVEL VERTICAL GRIPPER TYPE DOUBLE GRIPPER FACILITIES: AUTOMATIC SWIVEL HEAD UNIVERSAL MILLING HEAD: AUTOMATIC CONVERSION FROM VERTICAL TO HORIZONTAL MACHINING MOTOR SPINDLE 12000 1/MIN DRIVE TYPE AC DRIVE POWER (100% ED) 10 KW DRIVE POWER (40% ED) 15 KW REVS - UP - 12000 RPM TOOLHOLDER SK 40 ACC. TO DIN 69871 NC ROTARY TABLE &ATILDE;? 900 X 630 MM TABLE SIZE 900 X 630 MM CENTERING BORE 50 H 6 MM PERMISSIBLE LOAD (TABLE CENTER) 800 KG KEYWAY WIDTH 14 H 7 MM NUMBER OF GROOVES 9 DISTANCE OF T-GROOVES 63 MM ROTATION SPEED MAX 4 AXLE 11 U/MIN 4TH AXIS (SWIVELLING RANGE) 360 X 0.001 DEGREES FULL CAB TOOL MAGAZINE, CHAIN, 60 PL. TOOL MAGAZINE CHAINS MAGAZINE MAGAZINE 60-SEAT SK 40 OR OPTIONALLY SELECTED TOOL HOLDERS PROBE INFRARED HEIDENHAIN PROBE INFRARED SERIAL. HEIDENHAIN TS 631 INTERNAL COOLANT THROUGH FEDERAL (B) PROD.-PACKAGE 40 BAR / 23 L / MIN, FORM B PRODUCTION PACKAGE 23 L / MIN (THEOR. AND 40 BAR PUMP CAPACITY) TANK 600 L, ROTATING VISOR, BAND CONVEYORS IKZ BY FEDERAL (B)
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 505 mm<br>turning length: 600 mm<br>turret positions: 12<br>cnc brand: siemens<br>cnc model: sinumerik <br><p>make dmg gildemeister</p>
<p>type ctx 410 live tooling</p>
<p>year 2004</p>
<p>dmg gildemeister ctx 410 with cnc siemens</p>
<p>centre height (mm) 505 diameter</p>
<p>center distance (mm) 600 mm</p>
<p>spindle bore 76 mm</p>
<p>cnc siemens turret 12 positions live tooling-	dimensions -	length	: 3.175 -	width	: 2.080 -	height	: 2.000 -	weight	: 5.500 kg</p>
<p>
TURNING DIAMETER: 505 MM
TURNING LENGTH: 600 MM
TURRET POSITIONS: 12
CNC BRAND: SIEMENS
CNC MODEL: SINUMERIK

MAKE DMG GILDEMEISTER

TYPE CTX 410 LIVE TOOLING

YEAR 2004

DMG GILDEMEISTER CTX 410 WITH CNC SIEMENS

CENTRE HEIGHT (MM) 505 DIAMETER

CENTER DISTANCE (MM) 600 MM

SPINDLE BORE 76 MM

CNC SIEMENS TURRET 12 POSITIONS LIVE TOOLING- DIMENSIONS - LENGTH : 3.175 - WIDTH : 2.080 - HEIGHT : 2.000 - WEIGHT : 5.500 KG

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-machining center vertical with rotary table

manufacturer: deckel maho gildemeister
type: dmc 65 v
year of construction: 2001
control: siemens 840 d
axles: 3
procedures:
x: 650
y: 500
z: 500

table size: 850 x 540
 
tool changers: 30 x hsk a-63
speed: 18,000
weight: 9.000 kg

accessories:

ikz
elektr.handrad
chip conveyor
mode 4

errors excepted			            
	           		                      
 MACHINING CENTER VERTICAL WITH ROTARY TABLE MANUFACTURER: DECKEL MAHO GILDEMEISTER TYPE: DMC 65 V YEAR OF CONSTRUCTION: 2001 CONTROL: SIEMENS 840 D AXLES: 3 PROCEDURES: X: 650 Y: 500 Z: 500 TABLE SIZE: 850 X 540 TOOL CHANGERS: 30 X HSK A-63 SPEED: 18,000 WEIGHT: 9.000 KG ACCESSORIES: IKZ ELEKTR.HANDRAD CHIP CONVEYOR MODE 4 ERRORS EXCEPTED
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-engine details

stock number 1105-02499 machine type cnc lathe - inclined bed machine make gildemeister type ctx 320 v6 built in 2003 control type cnc storage france country of origin germany delivery immediately from stock of based on cargo from site work technical details

turning diameter 505 mm turning length 450 mm control siemens 840 d shop mill lining diameter 210 mm rod diameter 51 mm turning diameter over bed slide 375 x way 213 mm z-axis 450 mm spindle speeds 25-6000 rpm spindle motor 16 / 12 kw torque on the s pindel 153 / 115 nm rapid traverse - longitudinal/plan 60/12/45 m / min c-axis 0.001 / 360 Ⱐnumber of driven tools 12 mm 㸠30 mm power 9 / 6.7 kw speed range 4500 / 4000 kw/rpm total power requirement 29 machine weight approx. 3.7 tonnes of space c a. 3.0 x 2.2 x 2.0 m accessories main and sub spindle yes and y axis c - axis 0.001 Ⱐfor main u.gegenspindel y - axis +-40 mm 12 angetr. coolant system chip conveyor additional information tools

well preserved machine
 with counter spindle
 4 axis machine
 c axis and y axe
 5 live tools + 10 fixed tools
 spaenefoerderer
 cnc siemens 840 d shop mill ENGINE DETAILS STOCK NUMBER 1105-02499 MACHINE TYPE CNC LATHE - INCLINED BED MACHINE MAKE GILDEMEISTER TYPE CTX 320 V6 BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY FROM STOCK OF BASED ON CARGO FROM SITE WORK TECHNICAL DETAILS TURNING DIAMETER 505 MM TURNING LENGTH 450 MM CONTROL SIEMENS 840 D SHOP MILL LINING DIAMETER 210 MM ROD DIAMETER 51 MM TURNING DIAMETER OVER BED SLIDE 375 X WAY 213 MM Z-AXIS 450 MM SPINDLE SPEEDS 25-6000 RPM SPINDLE MOTOR 16 / 12 KW TORQUE ON THE S PINDEL 153 / 115 NM RAPID TRAVERSE - LONGITUDINAL/PLAN 60/12/45 M / MIN C-AXIS 0.001 / 360 &ACIRC;&DEG; NUMBER OF DRIVEN TOOLS 12 MM &ATILDE;&CEDIL; 30 MM POWER 9 / 6.7 KW SPEED RANGE 4500 / 4000 KW/RPM TOTAL POWER REQUIREMENT 29 MACHINE WEIGHT APPROX. 3.7 TONNES OF SPACE C A. 3.0 X 2.2 X 2.0 M ACCESSORIES MAIN AND SUB SPINDLE YES AND Y AXIS C - AXIS 0.001 &ACIRC;&DEG; FOR MAIN U.GEGENSPINDEL Y - AXIS +-40 MM 12 ANGETR. COOLANT SYSTEM CHIP CONVEYOR ADDITIONAL INFORMATION TOOLS WELL PRESERVED MACHINE WITH COUNTER SPINDLE 4 AXIS MACHINE C AXIS AND Y AXE 5 LIVE TOOLS + 10 FIXED TOOLS SPAENEFOERDERER CNC SIEMENS 840 D SHOP MILL
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-control heidenhain cnc pilot 3190
swing  diameter over bed 680 mm
turning length 1000 mm
spindle speed 3600 1 / min
12-speed turret (no driven tools)
tailstock
high pressure pump
smw steady rest
chip conveyor  CONTROL HEIDENHAIN CNC PILOT 3190 SWING DIAMETER OVER BED 680 MM TURNING LENGTH 1000 MM SPINDLE SPEED 3600 1 / MIN 12-SPEED TURRET (NO DRIVEN TOOLS) TAILSTOCK HIGH PRESSURE PUMP SMW STEADY REST CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-cnc turning and milling centre gildemeister nef 400 bearing no 1105-02481 category cnc lathe

make gildemeister type nef 400 year 2008 state second-hand machine cnc cnc fanuc 210 manuel guide storage france country of origin germany delivery immediately cargo base ex work technical details turning diameter 350 mm turning length 650 mm 
cnc fanuc 210 manuel guide swing 530 mm x 255 mm travel - travel - z 650 mm spindle speed: 25-4500 1/min spindle bore 79 mm turret head 12 pos. 
rapid traverse x axis 20 m / min rapid traverse z axis 24 m/min power - spindle motor 11.5 kw tailstock shift 550 mm taper in the tailstock quill mk 4 quill diameter 80 mm operating voltage 400 v description only 2-axis lathe

-controls: cnc fanuc 210 with manuel guide
-3 - jaw chuck 㸠200 mm

-with tailstock
 -revolver 12 specialist vdi 30

tool holders available
-spã¤newaanne
-coolant system 
 CNC TURNING AND MILLING CENTRE GILDEMEISTER NEF 400 BEARING NO 1105-02481 CATEGORY CNC LATHE MAKE GILDEMEISTER TYPE NEF 400 YEAR 2008 STATE SECOND-HAND MACHINE CNC CNC FANUC 210 MANUEL GUIDE STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 350 MM TURNING LENGTH 650 MM CNC FANUC 210 MANUEL GUIDE SWING 530 MM X 255 MM TRAVEL - TRAVEL - Z 650 MM SPINDLE SPEED: 25-4500 1/MIN SPINDLE BORE 79 MM TURRET HEAD 12 POS. RAPID TRAVERSE X AXIS 20 M / MIN RAPID TRAVERSE Z AXIS 24 M/MIN POWER - SPINDLE MOTOR 11.5 KW TAILSTOCK SHIFT 550 MM TAPER IN THE TAILSTOCK QUILL MK 4 QUILL DIAMETER 80 MM OPERATING VOLTAGE 400 V DESCRIPTION ONLY 2-AXIS LATHE -CONTROLS: CNC FANUC 210 WITH MANUEL GUIDE -3 - JAW CHUCK &ATILDE;&CEDIL; 200 MM -WITH TAILSTOCK -REVOLVER 12 SPECIALIST VDI 30 TOOL HOLDERS AVAILABLE -SP&ATILDE;&CURREN;NEWAANNE -COOLANT SYSTEM
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-manufacturer: gildemeister
type: dmu 200 p

year of construction: 1999
type of offer: second-hand machine
condition: perfect

technical data
control heidenhain
x trail 2000
y way 1800
z-way 1100
round table size d 1100 b = 0-360â° =
power 30 kw
1 pallet
4-axis
horizontal / vertical head MANUFACTURER: GILDEMEISTER TYPE: DMU 200 P YEAR OF CONSTRUCTION: 1999 TYPE OF OFFER: SECOND-HAND MACHINE CONDITION: PERFECT TECHNICAL DATA CONTROL HEIDENHAIN X TRAIL 2000 Y WAY 1800 Z-WAY 1100 ROUND TABLE SIZE D 1100 B = 0-360&ACIRC;&DEG; = POWER 30 KW 1 PALLET 4-AXIS HORIZONTAL / VERTICAL HEAD
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-cnc lathe gildemeister ct 60 bearing no 1105-02395 category cnc lathe make gildemeister type ct 60 year 1990 state second-hand machine control cnc epl 2 storage france country of origin germany delivery immediately cargo base ex work technical details turning diameter 650 mm turning length 1000 mm control epl 2 swing up over bed cover 650 mm swing up over facing slide 360 mm plan route 320 mm spindle diameter in the vord. bearing 140 mm spindle bore 107 mm speed range 4-3060 rpm feed 10 m / min rapid traverse 10 m/min total power requirement 58.5 kw description 12 revolver v 24 - interface, chip conveyor, power operated chucks 315 mm,.
 tool holder tailstock, cnc epl 2 
 CNC LATHE GILDEMEISTER CT 60 BEARING NO 1105-02395 CATEGORY CNC LATHE MAKE GILDEMEISTER TYPE CT 60 YEAR 1990 STATE SECOND-HAND MACHINE CONTROL CNC EPL 2 STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 650 MM TURNING LENGTH 1000 MM CONTROL EPL 2 SWING UP OVER BED COVER 650 MM SWING UP OVER FACING SLIDE 360 MM PLAN ROUTE 320 MM SPINDLE DIAMETER IN THE VORD. BEARING 140 MM SPINDLE BORE 107 MM SPEED RANGE 4-3060 RPM FEED 10 M / MIN RAPID TRAVERSE 10 M/MIN TOTAL POWER REQUIREMENT 58.5 KW DESCRIPTION 12 REVOLVER V 24 - INTERFACE, CHIP CONVEYOR, POWER OPERATED CHUCKS 315 MM,. TOOL HOLDER TAILSTOCK, CNC EPL 2
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-cnc lathe gildemeister twin 32 bearing no 1105-00067 category cnc lathe make gildemeister type twin 32 year 2007 state second-hand machine control cnc sinumerik 840 d storage france country of origin germany delivery time after abspr at cargo base from site technical details rod diameter 32 mm spindle diameter 100 mm turning length 580 mm speed 25-8,000 rpm per c-axis, 0.001 â° degrees sub spindle indexing yes / yes rod diameter 37 mm speed 31-6,300 rpm indexing per c-axis, 0.001 â° degree turret (x-x) 2 x 12 x vdi 25 driven tool stations 2 x 12 control sinumerik 840 d coolant emulsion pump approx. 50 bar total power 28 kw machine weight 6 tons of space approximately 4.8 x 2.2 x 2 (+ irco) m s pã¤nefã¶rderer bã¼rener machine factory accessory tool holder 5 rigid, powered 5pcs / off parts conveyor description immediately available.
 with 6 axes!
 accessories:
 collet chuck main &amp; sub spindle type stanntop 42mm-spannzangenfutter
 1 x set vdi 25 holders ca 10 pieces of it driven without y axis
 with lns rods loading magazine 2 x chip pliers feed slide 42 maxi
 CNC LATHE GILDEMEISTER TWIN 32 BEARING NO 1105-00067 CATEGORY CNC LATHE MAKE GILDEMEISTER TYPE TWIN 32 YEAR 2007 STATE SECOND-HAND MACHINE CONTROL CNC SINUMERIK 840 D STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY TIME AFTER ABSPR AT CARGO BASE FROM SITE TECHNICAL DETAILS ROD DIAMETER 32 MM SPINDLE DIAMETER 100 MM TURNING LENGTH 580 MM SPEED 25-8,000 RPM PER C-AXIS, 0.001 &ACIRC;&DEG; DEGREES SUB SPINDLE INDEXING YES / YES ROD DIAMETER 37 MM SPEED 31-6,300 RPM INDEXING PER C-AXIS, 0.001 &ACIRC;&DEG; DEGREE TURRET (X-X) 2 X 12 X VDI 25 DRIVEN TOOL STATIONS 2 X 12 CONTROL SINUMERIK 840 D COOLANT EMULSION PUMP APPROX. 50 BAR TOTAL POWER 28 KW MACHINE WEIGHT 6 TONS OF SPACE APPROXIMATELY 4.8 X 2.2 X 2 (+ IRCO) M S P&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDERER B&ATILDE;&FRAC14;RENER MACHINE FACTORY ACCESSORY TOOL HOLDER 5 RIGID, POWERED 5PCS / OFF PARTS CONVEYOR DESCRIPTION IMMEDIATELY AVAILABLE. WITH 6 AXES! ACCESSORIES: COLLET CHUCK MAIN &AMP; SUB SPINDLE TYPE STANNTOP 42MM-SPANNZANGENFUTTER 1 X SET VDI 25 HOLDERS CA 10 PIECES OF IT DRIVEN WITHOUT Y AXIS WITH LNS RODS LOADING MAGAZINE 2 X CHIP PLIERS FEED SLIDE 42 MAXI
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 75.000 €
Ubicación: Land-dmg gildemeister ctx 510 ecoline used lathe
year: 2011
max turning diameter: 680 mm
longitudinal consa (z): 1050 mm
cnc: siemens 
spindle speed: 3250 rpm
motor power: 33 kw
bar passage: 71 mm
tower: vdi 40
no tool positions: 12, max 6 motorized
tailstock
chip conveyor
bar package     DMG GILDEMEISTER CTX 510 ECOLINE USED LATHE YEAR: 2011 MAX TURNING DIAMETER: 680 MM LONGITUDINAL CONSA (Z): 1050 MM CNC: SIEMENS SPINDLE SPEED: 3250 RPM MOTOR POWER: 33 KW BAR PASSAGE: 71 MM TOWER: VDI 40 NO TOOL POSITIONS: 12, MAX 6 MOTORIZED TAILSTOCK CHIP CONVEYOR BAR PACKAGE
Vendedor: ARTE FERRUM
Año de construcción: usado
Precio: 50.000 €
Ubicación: Land-the mitsubishi fx30k wire edm used is a large-scale 5-axis erosion with a fixed bench; the strokes x 750, s 500, with 350 mm, dimensions table 1.100 x 875 mm capacity 2 kg, dimensions of the piece 1.300 x 800 x 345 mm, complete with automatic threading, refrigerator, immersion processing and concealed tank door; year of construction 2001, according to ce standards.

from 01.05 see offer abc.resale.info
ab 01.05 siehe abc.resale.info angebot
? 01.05 ???????? ??????????? abc.resale.info

welcome

thank you for your inquiry.
in invite you to visit the machine offers on our website.
if you have any further questions, i am at your disposal.

warning; from 01.05.2018 we are only on the platform abc.resale.info, machineseeker raised prices by 1200%!?!

abc.arte-ferrum.eu/en/dmg-deckel-maho-dmc-635-v-vertical-milling-center-detail
proposal level 57.000 euros

abc.arte-ferrum.eu/en/deckel-maho-dmu-60-t-vertical-center-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/deckel-maho-dmc-63v-vertical-machining-center-detail
proposal level euro 23.900

abc.arte-ferrum.eu/en/doosan-daewoo-puma-240-mb-lathe-cnc-detail
proposal level 45.900 euro

abc.arte-ferrum.eu/en/daewoo-doosan-puma-2000-sy-lathe-6axis-loader-detail
proposal level 57.500 euro

abc.arte-ferrum.eu/en/quaser-hx-504-bp-12-cnc-horizontal-machining-center-detail
proposal level 137.000 €

abc.arte-ferrum.eu/en/quaser-hx504b-cnc-horizontal-machining-center-detail
proposal level 98.000 euro

abc.arte-ferrum.eu/en/doosan-mynx-6500-50-vertical-machine-machining-center-detail
proposal level 78.000 euro

abc.arte-ferrum.eu/en/daewoo-puma-350-a-lathe-cnc-detail
proposal level 43.900 eur

abc.arte-ferrum.eu/en/gildemeister-ctx-210-cnc-lathe-bar-loader-iemca-boss-545-e-detail
proposal level 44.000 euros

abc.arte-ferrum.eu/en/mikron-vcp-710-vertical-machining-center-detail
proposal level 77,000 euro

abc.arte-ferrum.eu/en/mikron-710-ucp-vcp-5-axis-vertical-machining-center-detail
proposal of the level of 80,000 euro

abc.arte-ferrum.eu/en/hanwha-sl-32he-cnc-lathe-multi-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/hurco-vmx-24-4axis-vertical-center-detail
proposal level 32.000 euro

abc.arte-ferrum.eu/en/hurco-bmc-6434-vertical-machining-center-detail
proposal level 54.500 euro

abc.arte-ferrum.eu/en/mazak-fh-4800-horizontal-machining-center-detail
proposal level 74.000 eur

abc.arte-ferrum.eu/en/mazak-dual-turn-20-cnc-lathe-two-head-detail
proposal level 36.900 eur

abc.arte-ferrum.eu/en/mazak-vtc-20-b-vertical-machining-center-detail
proposal level 22.700 euro

abc.arte-ferrum.eu/en/mazak-vtc-300-c-ii-vertical-machining-center-detail
proposal level 67.000 euro

abc://abc.arte-ferrum.eu/en/mazak-sqt-250m-lathe-axis-c-1998-detail
proposal level 47.500 euro

abc.arte-ferrum.eu/en/mikron-haas-vce-500-4-axes-vertical-machining-center-detail
proposal level 26.000 euro

abc.arte-ferrum.eu/en/sodick-aq327l-premium-precision-wire-edm-cnc-detail
proposal level 32.500 euro

abc.arte-ferrum.eu/en/hardinge-vmc-1000-ii-cnc-vertical-machining-center-detail
proposal level 24.900 euro

abc.arte-ferrum.eu/en/mori-seiki-nl2500sy-700-cnc-lathe-2004-detail
proposal level 92.000 euro

abc.arte-ferrum.eu/en/goodway-ga-3000-l-cnc-lathe-detail
proposal level 45.500 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-equipped-with-easily-removable-sanding-unit-detail
proposal level 21.700 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-m-cnc-lathe-12-motorized-tools-detail
proposal level 24.900 euro

abc://abc.arte-ferrum.eu/en/heckert-cwk-500d-horizontal-machining-center-detail
proposal level 53.500 €

abc.arte-ferrum.eu/en/dmg-sauer-ultrasonic-10-5-axis-high-speed-vertical-machining-center-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/dmg-gildemeister-sprint-20-8-linear-cnc-sliding-head-stock-lathe-swiss-type-with-8-controlled-axis-and-bar-feeder-2011-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/haas-vf-7-40-cnc-vertical-machining-centre-high-speed-2015-3-axis-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/trumpf-trulaser-5040-truflow-7kw-laser-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/mazak-quick-turn-250ma-500-smoothg-used-lathe-made-in-japan-2017-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

negotiable prices, including disassembly and loading, except sold, central europe

best regards/sincerely/cordiali saluti/meilleures salutations
the myth of friendly grüßen/saludos cordiales.a atte.saludos honorable/c c ?????????/?????

arte ferrum   THE MITSUBISHI FX30K WIRE EDM USED IS A LARGE-SCALE 5-AXIS EROSION WITH A FIXED BENCH; THE STROKES X 750, S 500, WITH 350 MM, DIMENSIONS TABLE 1.100 X 875 MM CAPACITY 2 KG, DIMENSIONS OF THE PIECE 1.300 X 800 X 345 MM, COMPLETE WITH AUTOMATIC THREADING, REFRIGERATOR, IMMERSION PROCESSING AND CONCEALED TANK DOOR; YEAR OF CONSTRUCTION 2001, ACCORDING TO CE STANDARDS. FROM 01.05 SEE OFFER ABC.RESALE.INFO AB 01.05 SIEHE ABC.RESALE.INFO ANGEBOT ? 01.05 ???????? ??????????? ABC.RESALE.INFO WELCOME THANK YOU FOR YOUR INQUIRY. IN INVITE YOU TO VISIT THE MACHINE OFFERS ON OUR WEBSITE. IF YOU HAVE ANY FURTHER QUESTIONS, I AM AT YOUR DISPOSAL. WARNING; FROM 01.05.2018 WE ARE ONLY ON THE PLATFORM ABC.RESALE.INFO, MACHINESEEKER RAISED PRICES BY 1200%!?! ABC.ARTE-FERRUM.EU/EN/DMG-DECKEL-MAHO-DMC-635-V-VERTICAL-MILLING-CENTER-DETAIL PROPOSAL LEVEL 57.000 EUROS ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMU-60-T-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMC-63V-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL EURO 23.900 ABC.ARTE-FERRUM.EU/EN/DOOSAN-DAEWOO-PUMA-240-MB-LATHE-CNC-DETAIL PROPOSAL LEVEL 45.900 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-DOOSAN-PUMA-2000-SY-LATHE-6AXIS-LOADER-DETAIL PROPOSAL LEVEL 57.500 EURO ABC.ARTE-FERRUM.EU/EN/QUASER-HX-504-BP-12-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 137.000 € ABC.ARTE-FERRUM.EU/EN/QUASER-HX504B-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 98.000 EURO ABC.ARTE-FERRUM.EU/EN/DOOSAN-MYNX-6500-50-VERTICAL-MACHINE-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 78.000 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-PUMA-350-A-LATHE-CNC-DETAIL PROPOSAL LEVEL 43.900 EUR ABC.ARTE-FERRUM.EU/EN/GILDEMEISTER-CTX-210-CNC-LATHE-BAR-LOADER-IEMCA-BOSS-545-E-DETAIL PROPOSAL LEVEL 44.000 EUROS ABC.ARTE-FERRUM.EU/EN/MIKRON-VCP-710-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 77,000 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-710-UCP-VCP-5-AXIS-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL OF THE LEVEL OF 80,000 EURO ABC.ARTE-FERRUM.EU/EN/HANWHA-SL-32HE-CNC-LATHE-MULTI-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-VMX-24-4AXIS-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 32.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-BMC-6434-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 54.500 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-FH-4800-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 74.000 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-DUAL-TURN-20-CNC-LATHE-TWO-HEAD-DETAIL PROPOSAL LEVEL 36.900 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-20-B-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 22.700 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-300-C-II-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 67.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-SQT-250M-LATHE-AXIS-C-1998-DETAIL PROPOSAL LEVEL 47.500 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-HAAS-VCE-500-4-AXES-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 26.000 EURO ABC.ARTE-FERRUM.EU/EN/SODICK-AQ327L-PREMIUM-PRECISION-WIRE-EDM-CNC-DETAIL PROPOSAL LEVEL 32.500 EURO ABC.ARTE-FERRUM.EU/EN/HARDINGE-VMC-1000-II-CNC-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 24.900 EURO ABC.ARTE-FERRUM.EU/EN/MORI-SEIKI-NL2500SY-700-CNC-LATHE-2004-DETAIL PROPOSAL LEVEL 92.000 EURO ABC.ARTE-FERRUM.EU/EN/GOODWAY-GA-3000-L-CNC-LATHE-DETAIL PROPOSAL LEVEL 45.500 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-EQUIPPED-WITH-EASILY-REMOVABLE-SANDING-UNIT-DETAIL PROPOSAL LEVEL 21.700 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-M-CNC-LATHE-12-MOTORIZED-TOOLS-DETAIL PROPOSAL LEVEL 24.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HECKERT-CWK-500D-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 53.500 € ABC.ARTE-FERRUM.EU/EN/DMG-SAUER-ULTRASONIC-10-5-AXIS-HIGH-SPEED-VERTICAL-MACHINING-CENTER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/DMG-GILDEMEISTER-SPRINT-20-8-LINEAR-CNC-SLIDING-HEAD-STOCK-LATHE-SWISS-TYPE-WITH-8-CONTROLLED-AXIS-AND-BAR-FEEDER-2011-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/HAAS-VF-7-40-CNC-VERTICAL-MACHINING-CENTRE-HIGH-SPEED-2015-3-AXIS-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/TRUMPF-TRULASER-5040-TRUFLOW-7KW-LASER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/MAZAK-QUICK-TURN-250MA-500-SMOOTHG-USED-LATHE-MADE-IN-JAPAN-2017-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. NEGOTIABLE PRICES, INCLUDING DISASSEMBLY AND LOADING, EXCEPT SOLD, CENTRAL EUROPE BEST REGARDS/SINCERELY/CORDIALI SALUTI/MEILLEURES SALUTATIONS THE MYTH OF FRIENDLY GRüßEN/SALUDOS CORDIALES.A ATTE.SALUDOS HONORABLE/C C ?????????/????? ARTE FERRUM
Vendedor: ARTE FERRUM
Año de construcción: usado
Precio: 57.500 €
Ubicación: Land-used horizontal machining center

heckert cwk 500 d

xmm750

ymm650 (750)

zmm700

spindle speed 50-10000 (15000)

siemens control sinumerik 840 d

tool magazine 60 positions

pallet changer

2000 ce

connected load, visible at work, complete with manuals and ce documentation

welcome

thank you for your inquiry.
in invite you to visit the machine offers on our website.
if you have any further questions, i am at your disposal.

warning; from 01.05.2018 we are only on the platform abc.resale.info, machineseeker raised prices by 1200%!?!

abc.arte-ferrum.eu/en/dmg-deckel-maho-dmc-635-v-vertical-milling-center-detail
proposal level 57.000 euros

abc.arte-ferrum.eu/en/deckel-maho-dmu-60-t-vertical-center-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/deckel-maho-dmc-63v-vertical-machining-center-detail
proposal level euro 23.900

abc.arte-ferrum.eu/en/doosan-daewoo-puma-240-mb-lathe-cnc-detail
proposal level 45.900 euro

abc.arte-ferrum.eu/en/daewoo-doosan-puma-2000-sy-lathe-6axis-loader-detail
proposal level 57.500 euro

abc.arte-ferrum.eu/en/quaser-hx-504-bp-12-cnc-horizontal-machining-center-detail
proposal level 137.000 €

abc.arte-ferrum.eu/en/quaser-hx504b-cnc-horizontal-machining-center-detail
proposal level 98.000 euro

abc.arte-ferrum.eu/en/doosan-mynx-6500-50-vertical-machine-machining-center-detail
proposal level 78.000 euro

abc.arte-ferrum.eu/en/daewoo-puma-350-a-lathe-cnc-detail
proposal level 43.900 eur

abc.arte-ferrum.eu/en/gildemeister-ctx-210-cnc-lathe-bar-loader-iemca-boss-545-e-detail
proposal level 44.000 euros

abc.arte-ferrum.eu/en/mikron-vcp-710-vertical-machining-center-detail
proposal level 77,000 euro

abc.arte-ferrum.eu/en/mikron-710-ucp-vcp-5-axis-vertical-machining-center-detail
proposal of the level of 80,000 euro

abc.arte-ferrum.eu/en/hanwha-sl-32he-cnc-lathe-multi-detail
proposal level 56.000 euro

abc.arte-ferrum.eu/en/hurco-vmx-24-4axis-vertical-center-detail
proposal level 32.000 euro

abc.arte-ferrum.eu/en/hurco-bmc-6434-vertical-machining-center-detail
proposal level 54.500 euro

abc.arte-ferrum.eu/en/mazak-fh-4800-horizontal-machining-center-detail
proposal level 74.000 eur

abc.arte-ferrum.eu/en/mazak-dual-turn-20-cnc-lathe-two-head-detail
proposal level 36.900 eur

abc.arte-ferrum.eu/en/mazak-vtc-20-b-vertical-machining-center-detail
proposal level 22.700 euro

abc.arte-ferrum.eu/en/mazak-vtc-300-c-ii-vertical-machining-center-detail
proposal level 67.000 euro

abc://abc.arte-ferrum.eu/en/mazak-sqt-250m-lathe-axis-c-1998-detail
proposal level 47.500 euro

abc.arte-ferrum.eu/en/mikron-haas-vce-500-4-axes-vertical-machining-center-detail
proposal level 26.000 euro

abc.arte-ferrum.eu/en/sodick-aq327l-premium-precision-wire-edm-cnc-detail
proposal level 32.500 euro

abc.arte-ferrum.eu/en/hardinge-vmc-1000-ii-cnc-vertical-machining-center-detail
proposal level 24.900 euro

abc.arte-ferrum.eu/en/mori-seiki-nl2500sy-700-cnc-lathe-2004-detail
proposal level 92.000 euro

abc.arte-ferrum.eu/en/goodway-ga-3000-l-cnc-lathe-detail
proposal level 45.500 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-equipped-with-easily-removable-sanding-unit-detail
proposal level 21.700 euro

abc.arte-ferrum.eu/en/okuma-lb-15-ii-m-cnc-lathe-12-motorized-tools-detail
proposal level 24.900 euro

abc://abc.arte-ferrum.eu/en/heckert-cwk-500d-horizontal-machining-center-detail
proposal level 53.500 €

abc.arte-ferrum.eu/en/dmg-sauer-ultrasonic-10-5-axis-high-speed-vertical-machining-center-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/dmg-gildemeister-sprint-20-8-linear-cnc-sliding-head-stock-lathe-swiss-type-with-8-controlled-axis-and-bar-feeder-2011-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/haas-vf-7-40-cnc-vertical-machining-centre-high-speed-2015-3-axis-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/trumpf-trulaser-5040-truflow-7kw-laser-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc.arte-ferrum.eu/en/mazak-quick-turn-250ma-500-smoothg-used-lathe-made-in-japan-2017-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

negotiable prices, including disassembly and loading, except sold, central europe

best regards/sincerely/cordiali saluti/meilleures salutations
the myth of friendly grüßen/saludos cordiales.a atte.saludos honorable/c c ?????????/?????

arte ferrum    USED HORIZONTAL MACHINING CENTER HECKERT CWK 500 D XMM750 YMM650 (750) ZMM700 SPINDLE SPEED 50-10000 (15000) SIEMENS CONTROL SINUMERIK 840 D TOOL MAGAZINE 60 POSITIONS PALLET CHANGER 2000 CE CONNECTED LOAD, VISIBLE AT WORK, COMPLETE WITH MANUALS AND CE DOCUMENTATION WELCOME THANK YOU FOR YOUR INQUIRY. IN INVITE YOU TO VISIT THE MACHINE OFFERS ON OUR WEBSITE. IF YOU HAVE ANY FURTHER QUESTIONS, I AM AT YOUR DISPOSAL. WARNING; FROM 01.05.2018 WE ARE ONLY ON THE PLATFORM ABC.RESALE.INFO, MACHINESEEKER RAISED PRICES BY 1200%!?! ABC.ARTE-FERRUM.EU/EN/DMG-DECKEL-MAHO-DMC-635-V-VERTICAL-MILLING-CENTER-DETAIL PROPOSAL LEVEL 57.000 EUROS ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMU-60-T-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMC-63V-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL EURO 23.900 ABC.ARTE-FERRUM.EU/EN/DOOSAN-DAEWOO-PUMA-240-MB-LATHE-CNC-DETAIL PROPOSAL LEVEL 45.900 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-DOOSAN-PUMA-2000-SY-LATHE-6AXIS-LOADER-DETAIL PROPOSAL LEVEL 57.500 EURO ABC.ARTE-FERRUM.EU/EN/QUASER-HX-504-BP-12-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 137.000 € ABC.ARTE-FERRUM.EU/EN/QUASER-HX504B-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 98.000 EURO ABC.ARTE-FERRUM.EU/EN/DOOSAN-MYNX-6500-50-VERTICAL-MACHINE-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 78.000 EURO ABC.ARTE-FERRUM.EU/EN/DAEWOO-PUMA-350-A-LATHE-CNC-DETAIL PROPOSAL LEVEL 43.900 EUR ABC.ARTE-FERRUM.EU/EN/GILDEMEISTER-CTX-210-CNC-LATHE-BAR-LOADER-IEMCA-BOSS-545-E-DETAIL PROPOSAL LEVEL 44.000 EUROS ABC.ARTE-FERRUM.EU/EN/MIKRON-VCP-710-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 77,000 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-710-UCP-VCP-5-AXIS-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL OF THE LEVEL OF 80,000 EURO ABC.ARTE-FERRUM.EU/EN/HANWHA-SL-32HE-CNC-LATHE-MULTI-DETAIL PROPOSAL LEVEL 56.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-VMX-24-4AXIS-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 32.000 EURO ABC.ARTE-FERRUM.EU/EN/HURCO-BMC-6434-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 54.500 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-FH-4800-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 74.000 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-DUAL-TURN-20-CNC-LATHE-TWO-HEAD-DETAIL PROPOSAL LEVEL 36.900 EUR ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-20-B-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 22.700 EURO ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-300-C-II-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 67.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-SQT-250M-LATHE-AXIS-C-1998-DETAIL PROPOSAL LEVEL 47.500 EURO ABC.ARTE-FERRUM.EU/EN/MIKRON-HAAS-VCE-500-4-AXES-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 26.000 EURO ABC.ARTE-FERRUM.EU/EN/SODICK-AQ327L-PREMIUM-PRECISION-WIRE-EDM-CNC-DETAIL PROPOSAL LEVEL 32.500 EURO ABC.ARTE-FERRUM.EU/EN/HARDINGE-VMC-1000-II-CNC-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 24.900 EURO ABC.ARTE-FERRUM.EU/EN/MORI-SEIKI-NL2500SY-700-CNC-LATHE-2004-DETAIL PROPOSAL LEVEL 92.000 EURO ABC.ARTE-FERRUM.EU/EN/GOODWAY-GA-3000-L-CNC-LATHE-DETAIL PROPOSAL LEVEL 45.500 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-EQUIPPED-WITH-EASILY-REMOVABLE-SANDING-UNIT-DETAIL PROPOSAL LEVEL 21.700 EURO ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-M-CNC-LATHE-12-MOTORIZED-TOOLS-DETAIL PROPOSAL LEVEL 24.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HECKERT-CWK-500D-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 53.500 € ABC.ARTE-FERRUM.EU/EN/DMG-SAUER-ULTRASONIC-10-5-AXIS-HIGH-SPEED-VERTICAL-MACHINING-CENTER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/DMG-GILDEMEISTER-SPRINT-20-8-LINEAR-CNC-SLIDING-HEAD-STOCK-LATHE-SWISS-TYPE-WITH-8-CONTROLLED-AXIS-AND-BAR-FEEDER-2011-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/HAAS-VF-7-40-CNC-VERTICAL-MACHINING-CENTRE-HIGH-SPEED-2015-3-AXIS-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/TRUMPF-TRULASER-5040-TRUFLOW-7KW-LASER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC.ARTE-FERRUM.EU/EN/MAZAK-QUICK-TURN-250MA-500-SMOOTHG-USED-LATHE-MADE-IN-JAPAN-2017-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. NEGOTIABLE PRICES, INCLUDING DISASSEMBLY AND LOADING, EXCEPT SOLD, CENTRAL EUROPE BEST REGARDS/SINCERELY/CORDIALI SALUTI/MEILLEURES SALUTATIONS THE MYTH OF FRIENDLY GRüßEN/SALUDOS CORDIALES.A ATTE.SALUDOS HONORABLE/C C ?????????/????? ARTE FERRUM
Vendedor: ARTE FERRUM
Año de construcción: usado
Ubicación: Land-doosan daewoo puma 2000 sy cnc lathe 6 axis
year 2005
diameter on the wheel 330
max torch length 510 mm
spindle speed rpm 45-4500
power kw 11-15
spindle asa a2-6
passage bar mm 65
rpm control speed 6000 rpm
power kw 5.5-7.5
against sand asa a2-5
passage bar contromandrino mm 34
torretta n 12 positions with motorized tools
dimensions tools mm 25 x 25
rotation speed motorized tools rpm 5000
tool presetting
x 250 mm
s mm 580
100 mm (+/-50)
carpet triple evacuator
loader cucchi giovanni
cnc fanuc 18 it-tb

non-binding data

abc://abc.arte-ferrum.eu/en/dmg-deckel-maho-dmc-635-v-vertical-milling-center-detail
proposal level 57.000 euros

abc://abc.arte-ferrum.eu/en/deckel-maho-dmu-60-t-vertical-center-detail
proposal level 56.000 euro

abc://abc.arte-ferrum.eu/en/deckel-maho-dmc-63v-vertical-machining-center-detail
proposal level euro 23.900

abc://abc.arte-ferrum.eu/en/doosan-daewoo-puma-240-mb-lathe-cnc-detail
proposal level 45.900 euro

abc://abc.arte-ferrum.eu/en/daewoo-doosan-puma-2000-sy-lathe-6axis-loader-detail
proposal level 57.500 euro

abc://abc.arte-ferrum.eu/en/quaser-hx-504-bp-12-cnc-horizontal-machining-center-detail
proposal level 137.000 €

abc://abc.arte-ferrum.eu/en/quaser-hx504b-cnc-horizontal-machining-center-detail
proposal level 98.000 euro

abc://abc.arte-ferrum.eu/en/doosan-mynx-6500-50-vertical-machine-machining-center-detail
proposal level 78.000 euro

abc://abc.arte-ferrum.eu/en/daewoo-puma-350-a-lathe-cnc-detail
proposal level 43.900 eur

abc://abc.arte-ferrum.eu/en/gildemeister-ctx-210-cnc-lathe-bar-loader-iemca-boss-545-e-detail
proposal level 44.000 euros

abc://abc.arte-ferrum.eu/en/mikron-vcp-710-vertical-machining-center-detail
proposal level 77,000 euro

abc://abc.arte-ferrum.eu/en/mikron-710-ucp-vcp-5-axis-vertical-machining-center-detail
proposal of the level of 80,000 euro

abc://abc.arte-ferrum.eu/en/hanwha-sl-32he-cnc-lathe-multi-detail
proposal level 56.000 euro

abc://abc.arte-ferrum.eu/en/hurco-vmx-24-4axis-vertical-center-detail
proposal level 32.000 euro

abc://abc.arte-ferrum.eu/en/hurco-bmc-6434-vertical-machining-center-detail
proposal level 54.500 euro

abc://abc.arte-ferrum.eu/en/deckel-maho-dmu-70-evolution-5-axis-cnc-universal-milling-machine-detail
proposal level 85.000 euro

abc://abc.arte-ferrum.eu/en/mazak-fh-4800-horizontal-machining-center-detail
proposal level 74.000 eur

abc://abc.arte-ferrum.eu/en/mazak-dual-turn-20-cnc-lathe-two-head-detail
proposal level 36.900 eur

abc://abc.arte-ferrum.eu/en/mazak-vtc-20-b-vertical-machining-center-detail
proposal level 22.700 euro

abc://abc.arte-ferrum.eu/en/mazak-vtc-300-c-ii-vertical-machining-center-detail
proposal level 67.000 euro

abc://abc.arte-ferrum.eu/en/mikron-haas-vce-500-4-axes-vertical-machining-center-detail
proposal level 26.000 euro

abc://abc.arte-ferrum.eu/en/sodick-aq327l-premium-precision-wire-edm-cnc-detail
proposal level 32.500 euro

abc://abc.arte-ferrum.eu/en/hardinge-vmc-1000-ii-cnc-vertical-machining-center-detail
proposal level 24.900 euro

abc://abc.arte-ferrum.eu/en/mori-seiki-nl2500sy-700-cnc-lathe-2004-detail
proposal level 93.000 euro

abc://abc.arte-ferrum.eu/en/goodway-ga-3000-l-cnc-lathe-detail
proposal level 45.500 euro

abc://abc.arte-ferrum.eu/en/okuma-lb-15-ii-equipped-with-easily-removable-sanding-unit-detail
proposal level 21.700 euro

abc://abc.arte-ferrum.eu/en/okuma-lb-15-ii-m-cnc-lathe-12-motorized-tools-detail
proposal level 24.900 euro

abc://abc.arte-ferrum.eu/en/dmg-sauer-ultrasonic-10-5-axis-high-speed-vertical-machining-center-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc://abc.arte-ferrum.eu/en/dmg-gildemeister-sprint-20-8-linear-cnc-sliding-head-stock-lathe-swiss-type-with-8-controlled-axis-and-bar-feeder-2011-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc://abc.arte-ferrum.eu/en/haas-vf-7-40-cnc-vertical-machining-centre-high-speed-2015-3-axis-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc://abc.arte-ferrum.eu/en/trumpf-trulaser-5040-truflow-7kw-laser-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

abc://abc.arte-ferrum.eu/en/mazak-quick-turn-250ma-500-smoothg-used-lathe-made-in-japan-2017-detail
offer intended for the end user not a machine dealer, refrain wasting time and curious.

negotiable prices, including disassembly and loading, except sold, central europe
  DOOSAN DAEWOO PUMA 2000 SY CNC LATHE 6 AXIS YEAR 2005 DIAMETER ON THE WHEEL 330 MAX TORCH LENGTH 510 MM SPINDLE SPEED RPM 45-4500 POWER KW 11-15 SPINDLE ASA A2-6 PASSAGE BAR MM 65 RPM CONTROL SPEED 6000 RPM POWER KW 5.5-7.5 AGAINST SAND ASA A2-5 PASSAGE BAR CONTROMANDRINO MM 34 TORRETTA N 12 POSITIONS WITH MOTORIZED TOOLS DIMENSIONS TOOLS MM 25 X 25 ROTATION SPEED MOTORIZED TOOLS RPM 5000 TOOL PRESETTING X 250 MM S MM 580 100 MM (+/-50) CARPET TRIPLE EVACUATOR LOADER CUCCHI GIOVANNI CNC FANUC 18 IT-TB NON-BINDING DATA ABC://ABC.ARTE-FERRUM.EU/EN/DMG-DECKEL-MAHO-DMC-635-V-VERTICAL-MILLING-CENTER-DETAIL PROPOSAL LEVEL 57.000 EUROS ABC://ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMU-60-T-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 56.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMC-63V-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL EURO 23.900 ABC://ABC.ARTE-FERRUM.EU/EN/DOOSAN-DAEWOO-PUMA-240-MB-LATHE-CNC-DETAIL PROPOSAL LEVEL 45.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DAEWOO-DOOSAN-PUMA-2000-SY-LATHE-6AXIS-LOADER-DETAIL PROPOSAL LEVEL 57.500 EURO ABC://ABC.ARTE-FERRUM.EU/EN/QUASER-HX-504-BP-12-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 137.000 € ABC://ABC.ARTE-FERRUM.EU/EN/QUASER-HX504B-CNC-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 98.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DOOSAN-MYNX-6500-50-VERTICAL-MACHINE-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 78.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DAEWOO-PUMA-350-A-LATHE-CNC-DETAIL PROPOSAL LEVEL 43.900 EUR ABC://ABC.ARTE-FERRUM.EU/EN/GILDEMEISTER-CTX-210-CNC-LATHE-BAR-LOADER-IEMCA-BOSS-545-E-DETAIL PROPOSAL LEVEL 44.000 EUROS ABC://ABC.ARTE-FERRUM.EU/EN/MIKRON-VCP-710-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 77,000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MIKRON-710-UCP-VCP-5-AXIS-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL OF THE LEVEL OF 80,000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HANWHA-SL-32HE-CNC-LATHE-MULTI-DETAIL PROPOSAL LEVEL 56.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HURCO-VMX-24-4AXIS-VERTICAL-CENTER-DETAIL PROPOSAL LEVEL 32.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HURCO-BMC-6434-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 54.500 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DECKEL-MAHO-DMU-70-EVOLUTION-5-AXIS-CNC-UNIVERSAL-MILLING-MACHINE-DETAIL PROPOSAL LEVEL 85.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-FH-4800-HORIZONTAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 74.000 EUR ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-DUAL-TURN-20-CNC-LATHE-TWO-HEAD-DETAIL PROPOSAL LEVEL 36.900 EUR ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-20-B-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 22.700 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-VTC-300-C-II-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 67.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MIKRON-HAAS-VCE-500-4-AXES-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 26.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/SODICK-AQ327L-PREMIUM-PRECISION-WIRE-EDM-CNC-DETAIL PROPOSAL LEVEL 32.500 EURO ABC://ABC.ARTE-FERRUM.EU/EN/HARDINGE-VMC-1000-II-CNC-VERTICAL-MACHINING-CENTER-DETAIL PROPOSAL LEVEL 24.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/MORI-SEIKI-NL2500SY-700-CNC-LATHE-2004-DETAIL PROPOSAL LEVEL 93.000 EURO ABC://ABC.ARTE-FERRUM.EU/EN/GOODWAY-GA-3000-L-CNC-LATHE-DETAIL PROPOSAL LEVEL 45.500 EURO ABC://ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-EQUIPPED-WITH-EASILY-REMOVABLE-SANDING-UNIT-DETAIL PROPOSAL LEVEL 21.700 EURO ABC://ABC.ARTE-FERRUM.EU/EN/OKUMA-LB-15-II-M-CNC-LATHE-12-MOTORIZED-TOOLS-DETAIL PROPOSAL LEVEL 24.900 EURO ABC://ABC.ARTE-FERRUM.EU/EN/DMG-SAUER-ULTRASONIC-10-5-AXIS-HIGH-SPEED-VERTICAL-MACHINING-CENTER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC://ABC.ARTE-FERRUM.EU/EN/DMG-GILDEMEISTER-SPRINT-20-8-LINEAR-CNC-SLIDING-HEAD-STOCK-LATHE-SWISS-TYPE-WITH-8-CONTROLLED-AXIS-AND-BAR-FEEDER-2011-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC://ABC.ARTE-FERRUM.EU/EN/HAAS-VF-7-40-CNC-VERTICAL-MACHINING-CENTRE-HIGH-SPEED-2015-3-AXIS-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC://ABC.ARTE-FERRUM.EU/EN/TRUMPF-TRULASER-5040-TRUFLOW-7KW-LASER-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. ABC://ABC.ARTE-FERRUM.EU/EN/MAZAK-QUICK-TURN-250MA-500-SMOOTHG-USED-LATHE-MADE-IN-JAPAN-2017-DETAIL OFFER INTENDED FOR THE END USER NOT A MACHINE DEALER, REFRAIN WASTING TIME AND CURIOUS. NEGOTIABLE PRICES, INCLUDING DISASSEMBLY AND LOADING, EXCEPT SOLD, CENTRAL EUROPE
Vendedor: ARTE FERRUM
Año de construcción: usado
Precio: 49.000 €
Ubicación: Land-machining center - vertical dmg lid maho gildemeister dmu 50 evolution bearing no 1105-02382 category machining center - vertical make dmg lid maho gildemeister type dmu 50 evolution year 1998 state second-hand machine control cnc heidenhain tn c 426 storage location from the location country of origin germany delivery free consultation of based on cargo from the site, further details on request technical details loaded x way 500 mm y way 380 mm z-way 380 mm speed 30000 rpm spindle retainer iso hsk 63 control control heidenhain tnc 426 rapid traverse x/y/z 30 000 mm / min clamping surface 500 x 380 mm number of t-slots 7 pcs max tool length from spindle nose 280 mm overall power demand of 36 kva machine weight 6 tons description 5-axis b-axis, c-axis control heidenhein tnc 426
 30000 rpm hsk 32 space: approx. l: 3, 0xb: 2, 53xh: 3, 15 m

machine is still in the off timer and is in use.

immediately free *. 
 MACHINING CENTER - VERTICAL DMG LID MAHO GILDEMEISTER DMU 50 EVOLUTION BEARING NO 1105-02382 CATEGORY MACHINING CENTER - VERTICAL MAKE DMG LID MAHO GILDEMEISTER TYPE DMU 50 EVOLUTION YEAR 1998 STATE SECOND-HAND MACHINE CONTROL CNC HEIDENHAIN TN C 426 STORAGE LOCATION FROM THE LOCATION COUNTRY OF ORIGIN GERMANY DELIVERY FREE CONSULTATION OF BASED ON CARGO FROM THE SITE, FURTHER DETAILS ON REQUEST TECHNICAL DETAILS LOADED X WAY 500 MM Y WAY 380 MM Z-WAY 380 MM SPEED 30000 RPM SPINDLE RETAINER ISO HSK 63 CONTROL CONTROL HEIDENHAIN TNC 426 RAPID TRAVERSE X/Y/Z 30 000 MM / MIN CLAMPING SURFACE 500 X 380 MM NUMBER OF T-SLOTS 7 PCS MAX TOOL LENGTH FROM SPINDLE NOSE 280 MM OVERALL POWER DEMAND OF 36 KVA MACHINE WEIGHT 6 TONS DESCRIPTION 5-AXIS B-AXIS, C-AXIS CONTROL HEIDENHEIN TNC 426 30000 RPM HSK 32 SPACE: APPROX. L: 3, 0XB: 2, 53XH: 3, 15 M MACHINE IS STILL IN THE OFF TIMER AND IS IN USE. IMMEDIATELY FREE *.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-control: dmg slimline<br/>  <br/>  spindle rpm: 8.000 rpm<br/>  tool magazine: 16 seats<br/>  tool holder: sk40<br/>  measuring equipment: switch no / tool breakage control renishaw yes CONTROL: DMG SLIMLINE

SPINDLE RPM: 8.000 RPM
TOOL MAGAZINE: 16 SEATS
TOOL HOLDER: SK40
MEASURING EQUIPMENT: SWITCH NO / TOOL BREAKAGE CONTROL RENISHAW YES
Vendedor: Arnd Sauter GmbH
Año de construcción: usado
Precio: 41.000 €
Ubicación: Land-cnc turning and milling centre gildemeister twin 32 stock no. 1129-112 category cnc turning and milling center make gildemeister type twin 32 year 2002 state second-hand machine control conventional cnc siemens 840 d storage location poland country of origin germany  
delivery time immediately cargo base further details on request technical details turning diameter 100 mm turning length 320 mm control cnc siemens 840 d total power requirement kw machine weight 6 tons of space approximately  m description counter spindle, driven tools, 2 heads
 year of construction: 2002
 country of origin: germany
 max turning diameter: 100 mm
 spindle passage: 50 mm
 max turning length: 320 mm
 spindle speed range: 40 â?? 8 000 rpm
 working range x 1/z1: 220/320 mm
 working area x 2/z2: 120/340 mm
 distance between screws: 580 mm
 counter spindle passage: 380 mm
 turret: 2 x 12 pcs
 total connection requirements: 28 kw
 weight: 6 000 kg
 control: cnc siemens 840 d with kurtz loader magazine lns quick load + live tools and fixed tools
spaeneforderer
 

 
 CNC TURNING AND MILLING CENTRE GILDEMEISTER TWIN 32 STOCK NO. 1129-112 CATEGORY CNC TURNING AND MILLING CENTER MAKE GILDEMEISTER TYPE TWIN 32 YEAR 2002 STATE SECOND-HAND MACHINE CONTROL CONVENTIONAL CNC SIEMENS 840 D STORAGE LOCATION POLAND COUNTRY OF ORIGIN GERMANY DELIVERY TIME IMMEDIATELY CARGO BASE FURTHER DETAILS ON REQUEST TECHNICAL DETAILS TURNING DIAMETER 100 MM TURNING LENGTH 320 MM CONTROL CNC SIEMENS 840 D TOTAL POWER REQUIREMENT KW MACHINE WEIGHT 6 TONS OF SPACE APPROXIMATELY M DESCRIPTION COUNTER SPINDLE, DRIVEN TOOLS, 2 HEADS YEAR OF CONSTRUCTION: 2002 COUNTRY OF ORIGIN: GERMANY MAX TURNING DIAMETER: 100 MM SPINDLE PASSAGE: 50 MM MAX TURNING LENGTH: 320 MM SPINDLE SPEED RANGE: 40 &ACIRC;?? 8 000 RPM WORKING RANGE X 1/Z1: 220/320 MM WORKING AREA X 2/Z2: 120/340 MM DISTANCE BETWEEN SCREWS: 580 MM COUNTER SPINDLE PASSAGE: 380 MM TURRET: 2 X 12 PCS TOTAL CONNECTION REQUIREMENTS: 28 KW WEIGHT: 6 000 KG CONTROL: CNC SIEMENS 840 D WITH KURTZ LOADER MAGAZINE LNS QUICK LOAD + LIVE TOOLS AND FIXED TOOLS SPAENEFORDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-cnc lathe - inclined bed machine dmg gildemeister ctx 310 bearing no 1105-02120 make dmg gildemeister type ctx 310 built in 2004 state second-hand machine control cnc heidenhain 4290 storage haguenau country of origin italy delivery immediately cargo base stock technical details turning diameter 200 mm turning length 450 mm control heidenhain 4290 total power requirement 7/10 kw machine weight 3.3 tons of space approximately 3 x 1.6 x 1.8 m description heidenhain 4290 control (incl. turn plus)
 3 - jaw chuck diameter 200 mm + span chuck
 12 station turret sauter (6 of them driven)
 c-axis
 driven tools
 part catcher
 tailstock
 chip conveyor

technical data / technical details:
 circulation ãËœ bed / turning diameter over bed-330 mm
 circulation ãËœ slide / turning ãËœ over sledge-260 mm
 swivel diameter / turnable diameter 200 mm
 plan path x-axis / travel cross x-axis 160 mm
 longitudinal travel of z-axis / travel longitudinal z-axis 450 mm
 rpm / speed spindle up to 5000 rpm / rpm
 speed range angetr. event center / speed of driven tools up to 4200 rpm / rpm
 rapid traverse x, z / rapid feed x, z 20, 30 m / min
 sleeve / tool taper vdi 30 power spindle 100 / 60% ed / drive capacity spindle 100 / 60% ed 7.5/10 kw
 approximate weight of the machine / weight approx. 3200 kg
 machine description, specifications and accessories are not binding-
technical data, accessories, and description of the machine are not binding.

CNC LATHE - INCLINED BED MACHINE DMG GILDEMEISTER CTX 310 BEARING NO 1105-02120 MAKE DMG GILDEMEISTER TYPE CTX 310 BUILT IN 2004 STATE SECOND-HAND MACHINE CONTROL CNC HEIDENHAIN 4290 STORAGE HAGUENAU COUNTRY OF ORIGIN ITALY DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 200 MM TURNING LENGTH 450 MM CONTROL HEIDENHAIN 4290 TOTAL POWER REQUIREMENT 7/10 KW MACHINE WEIGHT 3.3 TONS OF SPACE APPROXIMATELY 3 X 1.6 X 1.8 M DESCRIPTION HEIDENHAIN 4290 CONTROL (INCL. TURN PLUS) 3 - JAW CHUCK DIAMETER 200 MM + SPAN CHUCK 12 STATION TURRET SAUTER (6 OF THEM DRIVEN) C-AXIS DRIVEN TOOLS PART CATCHER TAILSTOCK CHIP CONVEYOR TECHNICAL DATA / TECHNICAL DETAILS: CIRCULATION &ATILDE;˜ BED / TURNING DIAMETER OVER BED-330 MM CIRCULATION &ATILDE;˜ SLIDE / TURNING &ATILDE;˜ OVER SLEDGE-260 MM SWIVEL DIAMETER / TURNABLE DIAMETER 200 MM PLAN PATH X-AXIS / TRAVEL CROSS X-AXIS 160 MM LONGITUDINAL TRAVEL OF Z-AXIS / TRAVEL LONGITUDINAL Z-AXIS 450 MM RPM / SPEED SPINDLE UP TO 5000 RPM / RPM SPEED RANGE ANGETR. EVENT CENTER / SPEED OF DRIVEN TOOLS UP TO 4200 RPM / RPM RAPID TRAVERSE X, Z / RAPID FEED X, Z 20, 30 M / MIN SLEEVE / TOOL TAPER VDI 30 POWER SPINDLE 100 / 60% ED / DRIVE CAPACITY SPINDLE 100 / 60% ED 7.5/10 KW APPROXIMATE WEIGHT OF THE MACHINE / WEIGHT APPROX. 3200 KG MACHINE DESCRIPTION, SPECIFICATIONS AND ACCESSORIES ARE NOT BINDING- TECHNICAL DATA, ACCESSORIES, AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 25.500 €
Ubicación: Land-cnc turning and milling centre gildemeister nef 400  no 1105-01507 category cnc turning and milling center make gildemeister type nef 400 built in 2008 state second-hand machine control cnc fanuc 210  storage france country of origin germany delivery query cargo base ex work technical details turning diameter 350 mm turning length 650 mm control cnc fanuc 210 swing 530 mm x 255 mm travel - travel - z 650 mm spindle speed : 25-4500 1/min spindle bore 79 mm turret 8 pos. 
rapid traverse x axis 20 m / min rapid traverse z axis 24 m/min power - spindle motor 11.5 kw tailstock shift 550 mm taper in the tailstock quill mk 4 quill diameter 80 mm operating voltage 400 v description only 2-axis lathe

-controls: cnc fanuc 210
-3 - jaw chuck ø 200 mm

-with tailstock
 -revolver 12 compartment vdi 30

tool holders available
-conveyors
-coolant system
 
    CNC TURNING AND MILLING CENTRE GILDEMEISTER NEF 400 NO 1105-01507 CATEGORY CNC TURNING AND MILLING CENTER MAKE GILDEMEISTER TYPE NEF 400 BUILT IN 2008 STATE SECOND-HAND MACHINE CONTROL CNC FANUC 210 STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY QUERY CARGO BASE EX WORK TECHNICAL DETAILS TURNING DIAMETER 350 MM TURNING LENGTH 650 MM CONTROL CNC FANUC 210 SWING 530 MM X 255 MM TRAVEL - TRAVEL - Z 650 MM SPINDLE SPEED : 25-4500 1/MIN SPINDLE BORE 79 MM TURRET 8 POS. RAPID TRAVERSE X AXIS 20 M / MIN RAPID TRAVERSE Z AXIS 24 M/MIN POWER - SPINDLE MOTOR 11.5 KW TAILSTOCK SHIFT 550 MM TAPER IN THE TAILSTOCK QUILL MK 4 QUILL DIAMETER 80 MM OPERATING VOLTAGE 400 V DESCRIPTION ONLY 2-AXIS LATHE -CONTROLS: CNC FANUC 210 -3 - JAW CHUCK ø 200 MM -WITH TAILSTOCK -REVOLVER 12 COMPARTMENT VDI 30 TOOL HOLDERS AVAILABLE -CONVEYORS -COOLANT SYSTEM
Vendedor: SOCIETE FIMOTEC
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)