We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree

Fresadoras de consola universales DMG MORI DMP 70

máquinas para el procesado de metales / fresadoras / Fresadoras de consola universales

TOP
Seller

Fabricante: DMG MORI

Modelo:DMP 70

Tipo de máquina: Fresadoras de consola universales

Número de artículo: 168881181

Cantidad: 1

Fecha: 17.03.2026

Ubicación: Land-de Alemania

Precio:


Seller-item-No.:051454


General
High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min


Main drive Drive power (100% DC) 6 kW
Drive power (40% DC) 8,5 kW
Torque (100% DC) 41 Nm
Torque (40% DC) 48 Nm
Speed range 20 - 15000 rpm
Spindle taper BT 30
Clamping System ISO 7388-3 - JD30
Toolchanger toolchanger
Number of tools 15
Type of magazine Disk
Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software package
Rotary joint, 6 channels Rotary lead through for integrated swivel rotary table with torque drives 6- flute, 2x for air, 4x for oil Including fix plate and fast coupling at machine side
Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
Chip conveyor with increased dicharge Chip conveyor with increased release Discharge height 740 mm Discharge height without bolted extension 1050 mm Longer than standard chip conveyor! (just available in combination with production package)
Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
BLUM Precision package Blum Precision package suitable to milling spindle including: Touch probe TC-52 Infrared Tool length and diameter measuring BLUM LC50 automatically cleaning through external airblast Calibration tool with taper Measuring cycles
Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
Signal lamp 4-colour Signal lamp, 4 colours
Automation Interface WH CELL right Automation interface right for WH CELL / WH FLEX Interface (Profibus) via M65; Automatic loading door right; Working table with 4-channel rotary joint; 4-chanel enegry supply to machine table for (3-Axis-Machines); Only in combination with an additional c
Manual control panel Electrical handwheel
Safety package for power failure Safety package for power failure Overload limiter, Undervoltage moni- toring with fast deceleration control
Tropical package Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
3D data model 3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
Special equipment Clamping Device Supplier Schunk Compact clamping system KSP 160 Device Scope: - 1x base plate suitable for the Machine table - 2x KSP3 160 clamping blocks with Quick-jaw change system
Special equipment RMS-Sensor
Special equipment - Booster for increasing clamping pressure to 8.5 bar for 2 pneumatic clamping circuits
Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
Pneumatic pallet pusher - robot side Pneumatic cylinder installed on the robot side for slide over individual workpiece pallets within the paternoster system.
WH 3 CELL Integration kit for DMP 35/70 WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
Workpiece carrier standard Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay´s not include)
Not OK discharge via slide Not OK discharge via slide Removal of bad parts after machine signal
Alignment station Alignment station for exact positioning of the workpiece in the gripper.
Package for tropical climate WH 3 CELL Package for tropical climate WH 3 CELL for ambient temperature max. 50°Celsius include separate active cooling unit for electrical cabinet
Additional magazine for DMP at WH3 Additional magazine for DMP at WH3 Tool magazine with 45 places for BT30 / BBT30 tools Max. tool length: 130mm max. tool diameter: 70mm incl. gripper change function
Robot Teachset Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper.
Special equipment Special - Triple gripper unit Type Schunk PGNplusP 80-1 Included: Blow-off nozzle Active gripping turning station Includes gripper module manufacturer Schunk PGN80 (Parallel Gripper) Also included in this option are: - 1 set - Standard - Gripper finger -
Comparte esta máquina en Facebook:

Pregunta

Distribuidor de la maquinaria?

Por favor remitir opcionalmente

Enviar la pregunta deseada?

¿Copia a usted?

Save input data


General
High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
Working area 1
Longitudinal 700 mm
Cross 420 mm
Vertical 380 mm
Technical Data
Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min


Main drive Drive power (100% DC) 6 kW
Drive power (40% DC) 8,5 kW
Torque (100% DC) 41 Nm
Torque (40% DC) 48 Nm
Speed range 20 - 15000 rpm
Spindle taper BT 30
Clamping System ISO 7388-3 - JD30
Toolchanger toolchanger
Number of tools 15
Type of magazine Disk
Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software package
Rotary joint, 6 channels Rotary lead through for integrated swivel rotary table with torque drives 6- flute, 2x for air, 4x for oil Including fix plate and fast coupling at machine side
Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
Chip conveyor with increased dicharge Chip conveyor with increased release Discharge height 740 mm Discharge height without bolted extension 1050 mm Longer than standard chip conveyor! (just available in combination with production package)
Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
BLUM Precision package Blum Precision package suitable to milling spindle including: Touch probe TC-52 Infrared Tool length and diameter measuring BLUM LC50 automatically cleaning through external airblast Calibration tool with taper Measuring cycles
Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
Signal lamp 4-colour Signal lamp, 4 colours
Automation Interface WH CELL right Automation interface right for WH CELL / WH FLEX Interface (Profibus) via M65; Automatic loading door right; Working table with 4-channel rotary joint; 4-chanel enegry supply to machine table for (3-Axis-Machines); Only in combination with an additional c
Manual control panel Electrical handwheel
Safety package for power failure Safety package for power failure Overload limiter, Undervoltage moni- toring with fast deceleration control
Tropical package Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
3D data model 3D data model in STEP format for integration in CAD System by the customer. It is used for machine simulation. (shipping against signed non disclosure agreement)
Special equipment Clamping Device Supplier Schunk Compact clamping system KSP 160 Device Scope: - 1x base plate suitable for the Machine table - 2x KSP3 160 clamping blocks with Quick-jaw change system
Special equipment RMS-Sensor
Special equipment - Booster for increasing clamping pressure to 8.5 bar for 2 pneumatic clamping circuits
Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
Pneumatic pallet pusher - robot side Pneumatic cylinder installed on the robot side for slide over individual workpiece pallets within the paternoster system.
WH 3 CELL Integration kit for DMP 35/70 WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
Workpiece carrier standard Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay´s not include)
Not OK discharge via slide Not OK discharge via slide Removal of bad parts after machine signal
Alignment station Alignment station for exact positioning of the workpiece in the gripper.
Package for tropical climate WH 3 CELL Package for tropical climate WH 3 CELL for ambient temperature max. 50°Celsius include separate active cooling unit for electrical cabinet
Additional magazine for DMP at WH3 Additional magazine for DMP at WH3 Tool magazine with 45 places for BT30 / BBT30 tools Max. tool length: 130mm max. tool diameter: 70mm incl. gripper change function
Robot Teachset Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper.
Special equipment Special - Triple gripper unit Type Schunk PGNplusP 80-1 Included: Blow-off nozzle Active gripping turning station Includes gripper module manufacturer Schunk PGN80 (Parallel Gripper) Also included in this option are: - 1 set - Standard - Gripper finger -

seller offer No. resale 051454
Comparte esta máquina en Facebook:
añadir a lista de favoritos
distribuidor
autorizado

Vendedor

logo dealer

DMG MORI Used Machines GmbH

Señora Kerstin Bauer
82538 Geretsried
Germany

RESALE miembro desde 2019


verified user
[ perfil de distribuidor ]
  • lista de máquinas (134)
enviar consulta
enviar consulta

Pregunta

Distribuidor de la maquinaria?

Por favor remitir opcionalmente

Enviar la pregunta deseada?

(a todos los vendedores y compradores de dicha máquina)

¿Copia a usted?

(copia de su preguna será enviado a su dirección de correo electrónico)

Save input data

(Save input data for further inquiries)

más DMG MORI DMP 70 + similar DMG MORI-Modelo

2023 DMG MORIDMP 70
2023 DMG MORIDMP-70
2017 DMG MORINLX 2500 SY / 700
DMG MORICTX 2500|700
2018 DMG MORINLX 2500 SY 700
DMG MORICTX 2500|700
2016 DMG MORIMilltap 700 39800 EUR
2013 DMG MORIMilltap 700
2023 DMG MORINLX2500/700
2016 DMG MORIMilltap 700 39800 EUR

Precio: sold DMG MORI DMP 70 + similares DMG MORI-Modelo

2016 DMG MORIMilltap 700 54900 EUR [Jul 2024]
2022 DMG MORICMX 70U 155000 EUR [Oct 2024]
2015 DMG MORIMilltap 700 90000 EUR [Mar 2017]