200 ofertas

Año de construcción: usado
Ubicación: Land-used dmg gildemeister twin 65 with y-b axis
control siemens 840 d powerline

technical data:
max. swing diameter  mm 250
max. turning diameter  mm 200
spindle distance mm 900

main spindle
max speed min-1 5,000
max bar passage mm 66

counter spindle
max speed min-1 5,000
maximum partial bar passage 66 x 650 mm
travel x-z axis mm 175 / 670
tailstock mounted taper mt 4

2 turrets with driven tools
speed driven tools min-1 4,000

slide 1 (top turret)
travel x - z axis mm 300 / 600
travel y mm +/-40
swing angle b axis (turret) degree -135°/+ 45°

slide 2 (lower turret)
travel path x - z axis mm 180 / 650

accessories:
y axis upper turret
b-axis upper turret
tailstock on counter spindle slide
workpiece - pickup equipment with gripper and conveyor belt
collet chuck on main and sub spindle
short rod feeder
chip conveyor
increased coolant system 20 bar  USED DMG GILDEMEISTER TWIN 65 WITH Y-B AXIS CONTROL SIEMENS 840 D POWERLINE TECHNICAL DATA: MAX. SWING DIAMETER MM 250 MAX. TURNING DIAMETER MM 200 SPINDLE DISTANCE MM 900 MAIN SPINDLE MAX SPEED MIN-1 5,000 MAX BAR PASSAGE MM 66 COUNTER SPINDLE MAX SPEED MIN-1 5,000 MAXIMUM PARTIAL BAR PASSAGE 66 X 650 MM TRAVEL X-Z AXIS MM 175 / 670 TAILSTOCK MOUNTED TAPER MT 4 2 TURRETS WITH DRIVEN TOOLS SPEED DRIVEN TOOLS MIN-1 4,000 SLIDE 1 (TOP TURRET) TRAVEL X - Z AXIS MM 300 / 600 TRAVEL Y MM +/-40 SWING ANGLE B AXIS (TURRET) DEGREE -135°/+ 45° SLIDE 2 (LOWER TURRET) TRAVEL PATH X - Z AXIS MM 180 / 650 ACCESSORIES: Y AXIS UPPER TURRET B-AXIS UPPER TURRET TAILSTOCK ON COUNTER SPINDLE SLIDE WORKPIECE - PICKUP EQUIPMENT WITH GRIPPER AND CONVEYOR BELT COLLET CHUCK ON MAIN AND SUB SPINDLE SHORT ROD FEEDER CHIP CONVEYOR INCREASED COOLANT SYSTEM 20 BAR
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: sinumerik siemens<br/>greates pass round over bed: 330 mm<br/>standard turning dia.: 200 mm<br/>main spindle::  <br/>max. rpm: 5.000 min/-1<br/>power capacity - main spindel: 11 / 16,5 kw<br/>max. torque: 166,5 nm<br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 68,5 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: ( - ) mm<br/>max. chucking diameter: 210 mm<br/>spindle taper: 140h5 <br/>c-axis: 0,001 °<br/>axis stroke::  <br/>x-axis: 182,5 mm<br/>z-axis: 455 mm<br/>c-axis: 360 °<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>number of driven toolspositions: 12 pos.<br/>tool taper: vdi 30 <br/>spindle speed - driven tool stations: max. 4.500 min -1<br/>power capacity - driven tool-stations: 8,4 kw<br/>max. torque: 20 nm<br/>tailstock::  <br/>tailstock adjustment: 396 mm<br/>tension force: 4 kn<br/>capture: mk 4 <br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,4 t<br/>dimensions of the machine ca.: 6,5 x 3,0 x 2,1 m<br/>documents:  <br/>chip conveyor:  <br/>coolantsystem:  <br/>c-axis:  <br/>turret:  <br/>cnc-turning- and millingcenter<br/>dmg mori - ecoturn 310 v3<br/><br/>- only ca. 600h operating-hours<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: SINUMERIK SIEMENS
GREATES PASS ROUND OVER BED: 330 MM
STANDARD TURNING DIA.: 200 MM
MAIN SPINDLE::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 11 / 16,5 KW
MAX. TORQUE: 166,5 NM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 68,5 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: ( - ) MM
MAX. CHUCKING DIAMETER: 210 MM
SPINDLE TAPER: 140H5
C-AXIS: 0,001 °
AXIS STROKE::
X-AXIS: 182,5 MM
Z-AXIS: 455 MM
C-AXIS: 360 °
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 4.500 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 8,4 KW
MAX. TORQUE: 20 NM
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 396 MM
TENSION FORCE: 4 KN
CAPTURE: MK 4
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,4 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 3,0 X 2,1 M
DOCUMENTS:
CHIP CONVEYOR:
COOLANTSYSTEM:
C-AXIS:
TURRET:
CNC-TURNING- AND MILLINGCENTER
DMG MORI - ECOTURN 310 V3

- ONLY CA. 600H OPERATING-HOURS




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-1 cnc lathe ctx 420 linear
circular diameter of 680 mm
swing over plan 565 mm
plan route x 260 mm
longitudinal stroke z 635 mm
bar passage 65 mm
10 spindle speed 5000 rpm
incl chuck
control siemens 840 d with reading-turn
c-axis
12 x discs revolver sauter with driven tools vdi 40
hollow clamping device of part of
spaennefoerderer
automatic tailstock
 1 CNC LATHE CTX 420 LINEAR CIRCULAR DIAMETER OF 680 MM SWING OVER PLAN 565 MM PLAN ROUTE X 260 MM LONGITUDINAL STROKE Z 635 MM BAR PASSAGE 65 MM 10 SPINDLE SPEED 5000 RPM INCL CHUCK CONTROL SIEMENS 840 D WITH READING-TURN C-AXIS 12 X DISCS REVOLVER SAUTER WITH DRIVEN TOOLS VDI 40 HOLLOW CLAMPING DEVICE OF PART OF SPAENNEFOERDERER AUTOMATIC TAILSTOCK
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube..gif" alt="Land-x-travel:1250 mm
y-travel:1250 mm
z-travel:1000 mm
tool magazin::120
tool taper:hsk-a 100
rotary-table:1100 mm
speed of turning table:500 u/min
set of change pallet:2 stück
a-axis:hsk-a 100
number of spindle speeds:12.000 u/min
power of spindle (motorspindle):52 / 430 kw / nm
:3000/3800 watt(heiz-/kühlleistung)
control for loadingstation:siemens(tft 8\")
dimensions of the machine ca.:31 m
weight of the machine ca.:21,5 t
connected load:100 kw
amperage - max.:160 a
mode of operation:4
number of working hours:370 h
working spindel hours:112 h
fd-spindle hours:50 h
measuring probe:renishaw powerprobe 60 optical (omp 60) hsk-a 100
:blum - lasercontrol nt-h 3d
:40 bar
spray gun:1 bar
3d quickset:
tropic package:
deckel maho paket mdynamics:
control siemens for loading station:
electronic handwheel siemens 840 d:
mps machine protection control:
cleaninstation hsk:
cooling unit blow air through spindle:
chip conveyor:

klick on the video button upper above to see the machining video on youtube." style="height: 18px;"> X-TRAVEL:1250 MM
Y-TRAVEL:1250 MM
Z-TRAVEL:1000 MM
TOOL MAGAZIN::120
TOOL TAPER:HSK-A 100
ROTARY-TABLE:1100 MM
SPEED OF TURNING TABLE:500 U/MIN
SET OF CHANGE PALLET:2 STüCK
A-AXIS:HSK-A 100
NUMBER OF SPINDLE SPEEDS:12.000 U/MIN
POWER OF SPINDLE (MOTORSPINDLE):52 / 430 KW / NM
:3000/3800 WATT(HEIZ-/KüHLLEISTUNG)
CONTROL FOR LOADINGSTATION:SIEMENS(TFT 8\")
DIMENSIONS OF THE MACHINE CA.:31 M
WEIGHT OF THE MACHINE CA.:21,5 T
CONNECTED LOAD:100 KW
AMPERAGE - MAX.:160 A
MODE OF OPERATION:4
NUMBER OF WORKING HOURS:370 H
WORKING SPINDEL HOURS:112 H
FD-SPINDLE HOURS:50 H
MEASURING PROBE:RENISHAW POWERPROBE 60 OPTICAL (OMP 60) HSK-A 100
:BLUM - LASERCONTROL NT-H 3D
:40 BAR
SPRAY GUN:1 BAR
3D QUICKSET:
TROPIC PACKAGE:
DECKEL MAHO PAKET MDYNAMICS:
CONTROL SIEMENS FOR LOADING STATION:
ELECTRONIC HANDWHEEL SIEMENS 840 D:
MPS MACHINE PROTECTION CONTROL:
CLEANINSTATION HSK:
COOLING UNIT BLOW AIR THROUGH SPINDLE:
CHIP CONVEYOR:

KLICK ON THE VIDEO BUTTON UPPER ABOVE TO SEE THE MACHINING VIDEO ON YOUTUBE.
Vendedor: VIG CNC & Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-highly dynamic vertical center dmg mori mill-tap 700
  
traverse path x/y/z 700 x 420 x 380 mm
spindle bt 30 24 000 rpm water-cooled, swapped before 1200 h
table size 840 mm x 420 mm
control siemens 840 d solution line
tool magazine with 25 places
direct wegmessystem in x/y/z renishaw measurement kit consisting of infrared mestaster omp 40 and tool measurement in the working area
chip conveyors, ikz with 40 bar
coolant blowing air switching m commands
spuellpistole
oil mist separator spannhydraulic incl 1 clamping circuit agregat / 2 lines 30 to 250 bar pressure range
interface for clamping the work table
 HIGHLY DYNAMIC VERTICAL CENTER DMG MORI MILL-TAP 700 TRAVERSE PATH X/Y/Z 700 X 420 X 380 MM SPINDLE BT 30 24 000 RPM WATER-COOLED, SWAPPED BEFORE 1200 H TABLE SIZE 840 MM X 420 MM CONTROL SIEMENS 840 D SOLUTION LINE TOOL MAGAZINE WITH 25 PLACES DIRECT WEGMESSYSTEM IN X/Y/Z RENISHAW MEASUREMENT KIT CONSISTING OF INFRARED MESTASTER OMP 40 AND TOOL MEASUREMENT IN THE WORKING AREA CHIP CONVEYORS, IKZ WITH 40 BAR COOLANT BLOWING AIR SWITCHING M COMMANDS SPUELLPISTOLE OIL MIST SEPARATOR SPANNHYDRAULIC INCL 1 CLAMPING CIRCUIT AGREGAT / 2 LINES 30 TO 250 BAR PRESSURE RANGE INTERFACE FOR CLAMPING THE WORK TABLE
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-x-travel: 600 mm<br/>y-travel: 560 mm<br/>z-travel: 510 mm<br/>control: siemens  slimline<br/>main spindle::  <br/>max. rpm: 12.000 min/-1<br/>power capacity - main spindel: 13 / 9 kw<br/>max. torque: 82 / 54 nm<br/>tool taper: sk 40 <br/>distance spindle nose and table: 120 - 630 mm<br/>work table::  <br/>table surface area: 900 x 560 mm<br/>max. table load: 600 kg<br/>t-slots: 5 <br/>work height max.: 850 mm<br/>tool magazin::  <br/>number of toolpositions: 30 pos.<br/>tool taper: sk 40 <br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 125 mm<br/>max. tool length: 300 mm<br/>max. tool weight: 8,0 kg<br/>feeds::  <br/>rapid traverse: 30 m/min<br/>feed power: 5 kn<br/>feed speeds: max. 30.000 mm/min<br/>total power requirement: 32 kva<br/>weight of the machine ca.: 5,0 t<br/>dimensions of the machine ca.: 4,0 x 5,0 x 3,0 m<br/>documents:  <br/>coolantsystem:  <br/>elektr. hand wheel:  <br/>chip conveyor:  <br/>cnc - machiningcenter vertical<br/>dmg mori - ecomill 600 v<br/><br/><br/><br/><br/><br/> X-TRAVEL: 600 MM
Y-TRAVEL: 560 MM
Z-TRAVEL: 510 MM
CONTROL: SIEMENS SLIMLINE
MAIN SPINDLE::
MAX. RPM: 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 13 / 9 KW
MAX. TORQUE: 82 / 54 NM
TOOL TAPER: SK 40
DISTANCE SPINDLE NOSE AND TABLE: 120 - 630 MM
WORK TABLE::
TABLE SURFACE AREA: 900 X 560 MM
MAX. TABLE LOAD: 600 KG
T-SLOTS: 5
WORK HEIGHT MAX.: 850 MM
TOOL MAGAZIN::
NUMBER OF TOOLPOSITIONS: 30 POS.
TOOL TAPER: SK 40
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 125 MM
MAX. TOOL LENGTH: 300 MM
MAX. TOOL WEIGHT: 8,0 KG
FEEDS::
RAPID TRAVERSE: 30 M/MIN
FEED POWER: 5 KN
FEED SPEEDS: MAX. 30.000 MM/MIN
TOTAL POWER REQUIREMENT: 32 KVA
WEIGHT OF THE MACHINE CA.: 5,0 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 5,0 X 3,0 M
DOCUMENTS:
COOLANTSYSTEM:
ELEKTR. HAND WHEEL:
CHIP CONVEYOR:
CNC - MACHININGCENTER VERTICAL
DMG MORI - ECOMILL 600 V





Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-1 5-axis baz dmg-mori
traverse path x/y/z 400 mm x 400 mm x 375 mm
control siemens sinumerik 840 d solution line with reading-mill
motor spindle sk 40 with 20 14 000 rpm
nc rotary table b-axis-5 â° up to + 110 â°
c axis 360 â°
chain magazine with 30 tool stations heat exchangers for spindle and table
infrared touch probe heidenhain ts 649
spã¤nnefã¶rderer, mode 4 electr. handwheel installed software for 3d quick set
 1 5-AXIS BAZ DMG-MORI TRAVERSE PATH X/Y/Z 400 MM X 400 MM X 375 MM CONTROL SIEMENS SINUMERIK 840 D SOLUTION LINE WITH READING-MILL MOTOR SPINDLE SK 40 WITH 20 14 000 RPM NC ROTARY TABLE B-AXIS-5 &ACIRC;&DEG; UP TO + 110 &ACIRC;&DEG; C AXIS 360 &ACIRC;&DEG; CHAIN MAGAZINE WITH 30 TOOL STATIONS HEAT EXCHANGERS FOR SPINDLE AND TABLE INFRARED TOUCH PROBE HEIDENHAIN TS 649 SP&ATILDE;&CURREN;NNEF&ATILDE;&PARA;RDERER, MODE 4 ELECTR. HANDWHEEL INSTALLED SOFTWARE FOR 3D QUICK SET
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-weight approx.: 10000 kg<br/>control: siemens 840 d <br/>turning length: 300 mm<br/>dimensions (l x w x h) approx.: 5050 x 3050 x 2500 mm<br/>number of places for driven tools: 2 x 12 <br/>toolchanger positions: 2 x 12 <br/>turning speed range: 20 - 5000 rpm<br/>tool taper: vdi 30 <br/>total power requirement: 26/ 21 kw kw<br/>description: machine number 07400001291<br> <br> <b>working range</b><br> swing over bed: 250 mm<br> turning diameter over face plate: 120 mm<br> center distance: 900 mm<br> cross travel/ longitudinal travel carriage top: 300/650 mm<br> vertical travel carriage up +/- 40mm<br> cross travel/ longitudinal travel carriage bottom: 180/650 mm<br> longitudinal travel spindle 2: 670 mm<br> cross travel spindle 2: 175 mm<br> <br> operating hours 92161 hrs<br> spindle hours 34376 hrs<br> <br> <br> machine has been reconditioned and equipped with the following new components:<br> central lubrication pump mkf1-kw2-200 skf single-duct pump,<br> ncu 561.2/571/571.2/... ncu 572/572.2/573.2 incl. network device, battery and fan s.nr.: st-r82005709<br> <br> machine was previously operated with gantry loader, this is not included!<br> control must be reprogrammed accordingly! WEIGHT APPROX.: 10000 KG
CONTROL: SIEMENS 840 D
TURNING LENGTH: 300 MM
DIMENSIONS (L X W X H) APPROX.: 5050 X 3050 X 2500 MM
NUMBER OF PLACES FOR DRIVEN TOOLS: 2 X 12
TOOLCHANGER POSITIONS: 2 X 12
TURNING SPEED RANGE: 20 - 5000 RPM
TOOL TAPER: VDI 30
TOTAL POWER REQUIREMENT: 26/ 21 KW KW
DESCRIPTION: MACHINE NUMBER 07400001291

WORKING RANGE
SWING OVER BED: 250 MM
TURNING DIAMETER OVER FACE PLATE: 120 MM
CENTER DISTANCE: 900 MM
CROSS TRAVEL/ LONGITUDINAL TRAVEL CARRIAGE TOP: 300/650 MM
VERTICAL TRAVEL CARRIAGE UP +/- 40MM
CROSS TRAVEL/ LONGITUDINAL TRAVEL CARRIAGE BOTTOM: 180/650 MM
LONGITUDINAL TRAVEL SPINDLE 2: 670 MM
CROSS TRAVEL SPINDLE 2: 175 MM

OPERATING HOURS 92161 HRS
SPINDLE HOURS 34376 HRS


MACHINE HAS BEEN RECONDITIONED AND EQUIPPED WITH THE FOLLOWING NEW COMPONENTS:
CENTRAL LUBRICATION PUMP MKF1-KW2-200 SKF SINGLE-DUCT PUMP,
NCU 561.2/571/571.2/... NCU 572/572.2/573.2 INCL. NETWORK DEVICE, BATTERY AND FAN S.NR.: ST-R82005709

MACHINE WAS PREVIOUSLY OPERATED WITH GANTRY LOADER, THIS IS NOT INCLUDED!
CONTROL MUST BE REPROGRAMMED ACCORDINGLY!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine is geometric in a mint condition
   overhauled
traverse path x/y/z 500 mm x 450 mm x 400 mm
control heidenhain itnc 530
nc rotary table spindle retainer hsk 50e 42 000 rpm
tool changer with 30 seats
electr. handwheel
laser tool measurement in the workroom blum infrared probe mode 4
kã¼hlagregat for spindle cabinet kã¼hlagreggat
machine is in a mint condition geometric
new linear guides in x/y/z axes new kgt incl bearing in z/y new milling spindle (dmg)
all parts original dmg
incl. ca 60 tool holder hsk 50 e
 MACHINE IS GEOMETRIC IN A MINT CONDITION OVERHAULED TRAVERSE PATH X/Y/Z 500 MM X 450 MM X 400 MM CONTROL HEIDENHAIN ITNC 530 NC ROTARY TABLE SPINDLE RETAINER HSK 50E 42 000 RPM TOOL CHANGER WITH 30 SEATS ELECTR. HANDWHEEL LASER TOOL MEASUREMENT IN THE WORKROOM BLUM INFRARED PROBE MODE 4 K&ATILDE;&FRAC14;HLAGREGAT FOR SPINDLE CABINET K&ATILDE;&FRAC14;HLAGREGGAT MACHINE IS IN A MINT CONDITION GEOMETRIC NEW LINEAR GUIDES IN X/Y/Z AXES NEW KGT INCL BEARING IN Z/Y NEW MILLING SPINDLE (DMG) ALL PARTS ORIGINAL DMG INCL. CA 60 TOOL HOLDER HSK 50 E
Vendedor: Luhan Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain tnc 430 <br/>tool taper: sk 40 <br/>spindle turning speed - stepless: 15.000 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11 t<br/>dimensions of the machine ca.: 5 x 4,5 x 3,1 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc 430 (without handwheel)<br/>- chip conveyor<br/>- 32-fold tool changer (sk 40)<br/>- preparation rotoclear<br/>- main spindle 2017 renewed, rotary union defective, still in production<br/>about 64,000 turn-on and 25,000 spindle hours<br/><br/>machine can be purchased in current condition or with / after one<br/>complete overhaul (spindle, ball screw, guides, tool changers,<br/>hoses, cooling unit - new geometry) before delivery of the machine<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN TNC 430
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: 15.000 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11 T
DIMENSIONS OF THE MACHINE CA.: 5 X 4,5 X 3,1 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC 430 (WITHOUT HANDWHEEL)
- CHIP CONVEYOR
- 32-FOLD TOOL CHANGER (SK 40)
- PREPARATION ROTOCLEAR
- MAIN SPINDLE 2017 RENEWED, ROTARY UNION DEFECTIVE, STILL IN PRODUCTION
ABOUT 64,000 TURN-ON AND 25,000 SPINDLE HOURS

MACHINE CAN BE PURCHASED IN CURRENT CONDITION OR WITH / AFTER ONE
COMPLETE OVERHAUL (SPINDLE, BALL SCREW, GUIDES, TOOL CHANGERS,
HOSES, COOLING UNIT - NEW GEOMETRY) BEFORE DELIVERY OF THE MACHINE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-turning-milling center

suitable machine for medium and large series

manufacturer: dmg gildemeister type: msl 42/7
year of build: 2009 control: fanuc
chuck diameter: collet chuck spindle passage: 42 mm speed range from - to: 4000-5000 u/min

facilities
axes: 7 driven tools: yes hollow clamping device: yes chip conveyor: yes
	
accessories:

bar feeder
tool

spindle hours: 29.531
power-on hours: 35.903

good condition!

only brass processing.

video available.

delivery time approx. mid april 2019

errors excepted.

TURNING-MILLING CENTER SUITABLE MACHINE FOR MEDIUM AND LARGE SERIES MANUFACTURER: DMG GILDEMEISTER TYPE: MSL 42/7 YEAR OF BUILD: 2009 CONTROL: FANUC CHUCK DIAMETER: COLLET CHUCK SPINDLE PASSAGE: 42 MM SPEED RANGE FROM - TO: 4000-5000 U/MIN FACILITIES AXES: 7 DRIVEN TOOLS: YES HOLLOW CLAMPING DEVICE: YES CHIP CONVEYOR: YES ACCESSORIES: BAR FEEDER TOOL SPINDLE HOURS: 29.531 POWER-ON HOURS: 35.903 GOOD CONDITION! ONLY BRASS PROCESSING. VIDEO AVAILABLE. DELIVERY TIME APPROX. MID APRIL 2019 ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 710 (2x) mm<br/>y-travel: 520 mm<br/>z-travel: 520 mm<br/>rotary table: 700 x 500 mm<br/>tools changer: 2 x 32 fach/tools<br/>chip coveyor:  <br/>tool adapter: hsk 63 <br/>number of spindle speeds: 20 - 18000 u/min/rpm<br/>spindle drive: 25 kw<br/>control: heidenhain tnc 430 <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>double machining center equipped with:<br/>- 2x 5-axis nc table (each 700x500mm)<br/>- cnc control heidenhain tnc 430<br/>- 2 tool changers each 32x (hsk 63)<br/><br/>currently with table bridge (self-made) - both 5 axle tables bridged for years, <br/>can be put back into operation.<br/><br/><br/><br/><br/> X-TRAVEL: 710 (2X) MM
Y-TRAVEL: 520 MM
Z-TRAVEL: 520 MM
ROTARY TABLE: 700 X 500 MM
TOOLS CHANGER: 2 X 32 FACH/TOOLS
CHIP COVEYOR:
TOOL ADAPTER: HSK 63
NUMBER OF SPINDLE SPEEDS: 20 - 18000 U/MIN/RPM
SPINDLE DRIVE: 25 KW
CONTROL: HEIDENHAIN TNC 430
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE MACHINING CENTER EQUIPPED WITH:
- 2X 5-AXIS NC TABLE (EACH 700X500MM)
- CNC CONTROL HEIDENHAIN TNC 430
- 2 TOOL CHANGERS EACH 32X (HSK 63)

CURRENTLY WITH TABLE BRIDGE (SELF-MADE) - BOTH 5 AXLE TABLES BRIDGED FOR YEARS,
CAN BE PUT BACK INTO OPERATION.




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 190.000 €
Ubicación: Land-type of machine cnc turning and milling center make gildemeister type ctx gamma 2000 tc year 2009 cnc control type storage location france country of origin germany delivery after agreement cargo base free truck of verladem technical details
swing 700 mm turning diameter 600 mm turning length 1300 mm spindle speeds 500 rpm spindle bore 102 mm control siemens 840 dsl shop turn power 52 kw total power demand 70 kw machine weight 18.5 tons of space approx. 7 x 3 x 1.8 m lot zub ehã¶r, bezel
 tools capto c6 fold magazine 36
 c-axis and b-axis + y axis simultaneous
 milling spindle with 36 compartment capto halter system and 12000 rpm lunette smw klu 220 12 to 101 mm
 high pressure pump 20 bars with paper band filter
 spaenefoerderere TYPE OF MACHINE CNC TURNING AND MILLING CENTER MAKE GILDEMEISTER TYPE CTX GAMMA 2000 TC YEAR 2009 CNC CONTROL TYPE STORAGE LOCATION FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY AFTER AGREEMENT CARGO BASE FREE TRUCK OF VERLADEM TECHNICAL DETAILS SWING 700 MM TURNING DIAMETER 600 MM TURNING LENGTH 1300 MM SPINDLE SPEEDS 500 RPM SPINDLE BORE 102 MM CONTROL SIEMENS 840 DSL SHOP TURN POWER 52 KW TOTAL POWER DEMAND 70 KW MACHINE WEIGHT 18.5 TONS OF SPACE APPROX. 7 X 3 X 1.8 M LOT ZUB EH&ATILDE;&PARA;R, BEZEL TOOLS CAPTO C6 FOLD MAGAZINE 36 C-AXIS AND B-AXIS + Y AXIS SIMULTANEOUS MILLING SPINDLE WITH 36 COMPARTMENT CAPTO HALTER SYSTEM AND 12000 RPM LUNETTE SMW KLU 220 12 TO 101 MM HIGH PRESSURE PUMP 20 BARS WITH PAPER BAND FILTER SPAENEFOERDERERE
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain tnc <br/>tool taper: sk 40 <br/>spindle turning speed - stepless:  u/min<br/>size of pallet: 500 x 400 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11 t<br/>dimensions of the machine ca.: 6,1 x 4,3 x 3,2 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc<br/>- pallet changer<br/>- chip conveyor<br/>- 60-fold tool changer (sk 40)<br/><br/>about 59,000 turn-on and 34,000 spindle hours<br/><br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN TNC
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: U/MIN
SIZE OF PALLET: 500 X 400 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11 T
DIMENSIONS OF THE MACHINE CA.: 6,1 X 4,3 X 3,2 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC
- PALLET CHANGER
- CHIP CONVEYOR
- 60-FOLD TOOL CHANGER (SK 40)

ABOUT 59,000 TURN-ON AND 34,000 SPINDLE HOURS





Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-machine type machining center - universal make dmg type dmu 70 v year 2000 control type cnc storage france country of origin germany delivery immediately cargo base ex work technical details
x way 750 mm y-way 600 mm z-way 520 mm table size 㸠700 x 500 mm spindle retainer for sk 40 spindle speeds - variable 20-10,000 rpm feeds - longitudinal/transverse/vertical 20,000 mm / min rapid traverse 50 m/min tool changer 32 tool length of maximum tool weight of 315 mm ma x 6 table load of max 0.35 t machine weight kg approx. 7 d additional information
cnc heidenhain tnc 430
 magazine 32 professional sk 40 10000 rpm
 under current MACHINE TYPE MACHINING CENTER - UNIVERSAL MAKE DMG TYPE DMU 70 V YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS X WAY 750 MM Y-WAY 600 MM Z-WAY 520 MM TABLE SIZE &ATILDE;&CEDIL; 700 X 500 MM SPINDLE RETAINER FOR SK 40 SPINDLE SPEEDS - VARIABLE 20-10,000 RPM FEEDS - LONGITUDINAL/TRANSVERSE/VERTICAL 20,000 MM / MIN RAPID TRAVERSE 50 M/MIN TOOL CHANGER 32 TOOL LENGTH OF MAXIMUM TOOL WEIGHT OF 315 MM MA X 6 TABLE LOAD OF MAX 0.35 T MACHINE WEIGHT KG APPROX. 7 D ADDITIONAL INFORMATION CNC HEIDENHAIN TNC 430 MAGAZINE 32 PROFESSIONAL SK 40 10000 RPM UNDER CURRENT
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain itnc 530 <br/>tool taper: sk 40 <br/>spindle turning speed - stepless: 15.000 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: ca 11t t<br/>dimensions of the machine ca.: 5 x 4,5 x 3,1 m<br/>5-axis machining center - equipped with:<br/>- cnc control heidenhain tnc 530 (without handwheel)<br/>- internal spindle cooling<br/>- chip conveyor<br/>- 32-fold tool changer (sk 40)<br/>- preparation rotoclear<br/>- still in production<br/>about 56,000 turn-on and 25,000 spindle hours<br/><br/>machine can be purchased in current condition or with / after one<br/>complete overhaul (spindle, ball screw, guides, tool changers,<br/>hoses, cooling unit - new geometry) before delivery of the machine<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN ITNC 530
TOOL TAPER: SK 40
SPINDLE TURNING SPEED - STEPLESS: 15.000 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: CA 11T T
DIMENSIONS OF THE MACHINE CA.: 5 X 4,5 X 3,1 M
5-AXIS MACHINING CENTER - EQUIPPED WITH:
- CNC CONTROL HEIDENHAIN TNC 530 (WITHOUT HANDWHEEL)
- INTERNAL SPINDLE COOLING
- CHIP CONVEYOR
- 32-FOLD TOOL CHANGER (SK 40)
- PREPARATION ROTOCLEAR
- STILL IN PRODUCTION
ABOUT 56,000 TURN-ON AND 25,000 SPINDLE HOURS

MACHINE CAN BE PURCHASED IN CURRENT CONDITION OR WITH / AFTER ONE
COMPLETE OVERHAUL (SPINDLE, BALL SCREW, GUIDES, TOOL CHANGERS,
HOSES, COOLING UNIT - NEW GEOMETRY) BEFORE DELIVERY OF THE MACHINE




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: dmg type: ctx 450 eco v3
year of constr.: 2014 control: siemens 840 d swing above bed: 650 mm travel plan: 267 mm
longitudinal travel: 600 mm
speed range from - until:-4000 rpm
approximate weight: 5,800 kg equipment
axles: 3 driven tools: 12 hollow clamping device: yes tailstock: yes
quill stroke automatic: yes
chip conveyor: yes

accessories:

rod package + interface
workpiece pick-up facility
connecting rod loader
bar passage diameter. 65

subject to error and sale.			
			
 MANUFACTURER: DMG TYPE: CTX 450 ECO V3 YEAR OF CONSTR.: 2014 CONTROL: SIEMENS 840 D SWING ABOVE BED: 650 MM TRAVEL PLAN: 267 MM LONGITUDINAL TRAVEL: 600 MM SPEED RANGE FROM - UNTIL:-4000 RPM APPROXIMATE WEIGHT: 5,800 KG EQUIPMENT AXLES: 3 DRIVEN TOOLS: 12 HOLLOW CLAMPING DEVICE: YES TAILSTOCK: YES QUILL STROKE AUTOMATIC: YES CHIP CONVEYOR: YES ACCESSORIES: ROD PACKAGE + INTERFACE WORKPIECE PICK-UP FACILITY CONNECTING ROD LOADER BAR PASSAGE DIAMETER. 65 SUBJECT TO ERROR AND SALE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 1.080 mm<br/>y-travel: 710 mm<br/>z-travel: 710 mm<br/>control: itnc530 <br/>b-axis: -91 - +12 °<br/>feed x/y/z-axis: 20 - 15.000 mm/min<br/>rapid traverse x/y/z: 30,00 m/min<br/>table surface area: 1.500 x 800 mm<br/>table load: 0,90 t<br/>number of t-slots: 11 <br/>t-slots: 14h12 <br/>t-slot - distance: 63 mm<br/>spindle turning speed - stepless: 20 - 10.000 u/min<br/>power capacity at 100 % load:  kw<br/>power capacity at 40 % load: 30,00 kw<br/>tool taper: sk40 din69871 <br/>tool magazin:: 2 x 16 <br/>tool diameter: 80 mm<br/>tool diameter with 2 vacant positions: 130 mm<br/>tool length - max.: 315 mm<br/>weight of tools max.: 8,00 kg<br/>: 14,00 sec<br/>total power requirement: 45,00 kw<br/>weight of the machine ca.: 11,50 t<br/>dimensions of the machine ca.: 7,70 x 5,00 x h3,20 m<br/>4- axis machining center with control heidenhain itnc530,<br/>coolant unit, coolant through the spindle 40bar,<br/>controlled head (b-axis -90° - +12°),<br/>probe heidenhain ts641, dust exhauster.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 1.080 MM
Y-TRAVEL: 710 MM
Z-TRAVEL: 710 MM
CONTROL: ITNC530
B-AXIS: -91 - +12 °
FEED X/Y/Z-AXIS: 20 - 15.000 MM/MIN
RAPID TRAVERSE X/Y/Z: 30,00 M/MIN
TABLE SURFACE AREA: 1.500 X 800 MM
TABLE LOAD: 0,90 T
NUMBER OF T-SLOTS: 11
T-SLOTS: 14H12
T-SLOT - DISTANCE: 63 MM
SPINDLE TURNING SPEED - STEPLESS: 20 - 10.000 U/MIN
POWER CAPACITY AT 100 % LOAD: KW
POWER CAPACITY AT 40 % LOAD: 30,00 KW
TOOL TAPER: SK40 DIN69871
TOOL MAGAZIN:: 2 X 16
TOOL DIAMETER: 80 MM
TOOL DIAMETER WITH 2 VACANT POSITIONS: 130 MM
TOOL LENGTH - MAX.: 315 MM
WEIGHT OF TOOLS MAX.: 8,00 KG
: 14,00 SEC
TOTAL POWER REQUIREMENT: 45,00 KW
WEIGHT OF THE MACHINE CA.: 11,50 T
DIMENSIONS OF THE MACHINE CA.: 7,70 X 5,00 X H3,20 M
4- AXIS MACHINING CENTER WITH CONTROL HEIDENHAIN ITNC530,
COOLANT UNIT, COOLANT THROUGH THE SPINDLE 40BAR,
CONTROLLED HEAD (B-AXIS -90° - +12°),
PROBE HEIDENHAIN TS641, DUST EXHAUSTER.





Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machining center vertical manufacturer: dmg
type: ecomill 1035 v
construction year: 2014
control: siemens 840 d
axles: 3
procedures:
x: 1035
y: 560
z: 510

speed: 10,000 rpm.
chip conveyor: yes
internal coolant supply: yes
weight: ca. 6 000 kg

accessories:

electronic handwheel
renishaw measuring sensor kit
direct measuring system

errors excepted			            
	           		                      
 MACHINING CENTER VERTICAL MANUFACTURER: DMG TYPE: ECOMILL 1035 V CONSTRUCTION YEAR: 2014 CONTROL: SIEMENS 840 D AXLES: 3 PROCEDURES: X: 1035 Y: 560 Z: 510 SPEED: 10,000 RPM. CHIP CONVEYOR: YES INTERNAL COOLANT SUPPLY: YES WEIGHT: CA. 6 000 KG ACCESSORIES: ELECTRONIC HANDWHEEL RENISHAW MEASURING SENSOR KIT DIRECT MEASURING SYSTEM ERRORS EXCEPTED
Vendedor: Spantech GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 19.500 €
Ubicación: Land-weight approx.: 9500 kg<br/>x-travel: 560 mm<br/>y-travel: 560 mm<br/>z-travel: 510 mm<br/>dimensions (l x w x h) approx.: 5000 x 4000 x 2950 mm<br/>toolchanger positions: 90 <br/>taper: bt40 <br/>turning speed range: 18.000 rpm<br/>pallet table size: 400 x 400 mm<br/>total power requirement: 15 kw<br/>control: siemens 840 d <br/>spindle torque: 130 nm<br/>description: - control: siemens 840 d - powerline<br> - spindle speed: 18.000<br> - travel x/y/z [in mm]: 560/560/510<br> <br> <b>spindle:</b><br> - technology: motor spindle<br> - speed: 18.000 rpm<br> - power: 15 kw<br> - torque: 130 nm<br> - taper: bt40<br> <br> <br> - pallet size: 400 x 400 mm<br> - clamping surface: t-slots/threaded holes<br> - workpiece height (max.): 700 mm<br> - collision circle: 600 mm<br> - max. load per pallet: 400 kg<br> <br> <b>in general:</b><br> - toolmagazin: shelf type, 90 stations<br> - rapid traverse in x/y/z-axis: 50 m/min<br> <br> <b>equipment / accessories:</b><br> - position sensor: direct scales in x/y/z<br> - chipmanagement: chip conveyor<br> - coolantmanagement: internal coolant unit with filter, tank 900l<br> - automation: palletchanger<br> - oil mist separation: preparation extraction<br> <br> <b>transportdimensions:</b><br> - machine: 4000 x 2500 x 2800 mm, ca. 7000 kg<br> - chip conveyor: 4500 x 800 x 1800 mm, ca. 350 kg<br> - cooling unit: 1500 x 1300 x 2100 mm, ca. 400 kg<br> - toolmagazine: 2600 x 1900 x 2950 mm, ca. 1500 kg<br> - pallet with accessorie: 2200 x 900 x 600 mm, ca. 150 kg<br> WEIGHT APPROX.: 9500 KG
X-TRAVEL: 560 MM
Y-TRAVEL: 560 MM
Z-TRAVEL: 510 MM
DIMENSIONS (L X W X H) APPROX.: 5000 X 4000 X 2950 MM
TOOLCHANGER POSITIONS: 90
TAPER: BT40
TURNING SPEED RANGE: 18.000 RPM
PALLET TABLE SIZE: 400 X 400 MM
TOTAL POWER REQUIREMENT: 15 KW
CONTROL: SIEMENS 840 D
SPINDLE TORQUE: 130 NM
DESCRIPTION: - CONTROL: SIEMENS 840 D - POWERLINE
- SPINDLE SPEED: 18.000
- TRAVEL X/Y/Z [IN MM]: 560/560/510

SPINDLE:
- TECHNOLOGY: MOTOR SPINDLE
- SPEED: 18.000 RPM
- POWER: 15 KW
- TORQUE: 130 NM
- TAPER: BT40


- PALLET SIZE: 400 X 400 MM
- CLAMPING SURFACE: T-SLOTS/THREADED HOLES
- WORKPIECE HEIGHT (MAX.): 700 MM
- COLLISION CIRCLE: 600 MM
- MAX. LOAD PER PALLET: 400 KG

IN GENERAL:
- TOOLMAGAZIN: SHELF TYPE, 90 STATIONS
- RAPID TRAVERSE IN X/Y/Z-AXIS: 50 M/MIN

EQUIPMENT / ACCESSORIES:
- POSITION SENSOR: DIRECT SCALES IN X/Y/Z
- CHIPMANAGEMENT: CHIP CONVEYOR
- COOLANTMANAGEMENT: INTERNAL COOLANT UNIT WITH FILTER, TANK 900L
- AUTOMATION: PALLETCHANGER
- OIL MIST SEPARATION: PREPARATION EXTRACTION

TRANSPORTDIMENSIONS:
- MACHINE: 4000 X 2500 X 2800 MM, CA. 7000 KG
- CHIP CONVEYOR: 4500 X 800 X 1800 MM, CA. 350 KG
- COOLING UNIT: 1500 X 1300 X 2100 MM, CA. 400 KG
- TOOLMAGAZINE: 2600 X 1900 X 2950 MM, CA. 1500 KG
- PALLET WITH ACCESSORIE: 2200 X 900 X 600 MM, CA. 150 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used dmg dmu 50 evolution linear - 5 axis machining center universal
new spindle !!!

control heidenhain itnc 530

technical specifications:

travels
x-way 500 mm
y-way 450 mm
z-way 400 mm
swivel range b: 108 °
turning range c: 360 °
rapid traverse 24 m / min
feed force 4.8 kn
feed rate 1 - 24,000 mm / min
main spindle
speed ??range: 20 - 18,000 rpm
drive power: 35/25 kw
max. torque: 30 nm
table clamping surface 500 x 380 mm
max. table load 200 kg
t-slots 5x 14 x 63 mm
tools
number of tool positions 30 pos. USED DMG DMU 50 EVOLUTION LINEAR - 5 AXIS MACHINING CENTER UNIVERSAL NEW SPINDLE !!! CONTROL HEIDENHAIN ITNC 530 TECHNICAL SPECIFICATIONS: TRAVELS X-WAY 500 MM Y-WAY 450 MM Z-WAY 400 MM SWIVEL RANGE B: 108 ° TURNING RANGE C: 360 ° RAPID TRAVERSE 24 M / MIN FEED FORCE 4.8 KN FEED RATE 1 - 24,000 MM / MIN MAIN SPINDLE SPEED ??RANGE: 20 - 18,000 RPM DRIVE POWER: 35/25 KW MAX. TORQUE: 30 NM TABLE CLAMPING SURFACE 500 X 380 MM MAX. TABLE LOAD 200 KG T-SLOTS 5X 14 X 63 MM TOOLS NUMBER OF TOOL POSITIONS 30 POS.
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Ubicación: Land-x-travel:1800 mm<br/>y-travel:700 mm<br/>z-travel:700 mm<br/>table surface area:2100 x 700 mm<br/>table load:1,5 t<br/>control:heidenhain itnc 530 <br/>turning speeds:20 - 12000 1/min<br/>taper iso:sk 40 <br/>tool change unit:30 pos.<br/>rapid traverse:40 m/min<br/>spindle:35 /25 kw<br/>total connected load:54 kva<br/>weight of the machine ca.:12,2 t<br/>dimensions of the machine ca.:6,91 x 3,45 x 2,7 m<br/><br/>3 axis vertical machining center, internal coolant supply 40 bar, 600l, without \ X-TRAVEL:1800 MM
Y-TRAVEL:700 MM
Z-TRAVEL:700 MM
TABLE SURFACE AREA:2100 X 700 MM
TABLE LOAD:1,5 T
CONTROL:HEIDENHAIN ITNC 530
TURNING SPEEDS:20 - 12000 1/MIN
TAPER ISO:SK 40
TOOL CHANGE UNIT:30 POS.
RAPID TRAVERSE:40 M/MIN
SPINDLE:35 /25 KW
TOTAL CONNECTED LOAD:54 KVA
WEIGHT OF THE MACHINE CA.:12,2 T
DIMENSIONS OF THE MACHINE CA.:6,91 X 3,45 X 2,7 M

3 AXIS VERTICAL MACHINING CENTER, INTERNAL COOLANT SUPPLY 40 BAR, 600L, WITHOUT \"ROTOCLEAR\", AIRBLAST THROUGH SPINDLE, CHIPCONVEYER, EL. HANDWHEEL, 3D TOUCHPROBE HEIDENHAIN TS 649, MODE 4, DMG NETSERVICE, NEW BALLSCREWS AND BEARINGS IN Y AND Z AXIS APPROX. 37.100 H MACHINE ON, 19.900 H SPINDLE ON
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-control siemens sinumerik 840d powerline
turning diameter 200 mm
bar diameter 65 mm
spindle speeds 5,000 min-1
counter spindle
2 x 12-station turret with driven tools
y / b axis
tailstock
parts conveyor
suction
chip conveyor
bar loaderkupa CONTROL SIEMENS SINUMERIK 840D POWERLINE TURNING DIAMETER 200 MM BAR DIAMETER 65 MM SPINDLE SPEEDS 5,000 MIN-1 COUNTER SPINDLE 2 X 12-STATION TURRET WITH DRIVEN TOOLS Y / B AXIS TAILSTOCK PARTS CONVEYOR SUCTION CHIP CONVEYOR BAR LOADERKUPA
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-x travel:   1250 mm<br/>y travel:   1000 mm<br/>z travel:   1000 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- number of processing axes (excl parallel axes):      5  <br/>- .. among of them simultaneous cnc axes:      5  <br/>- x-axis travel:   1250 mm<br/>- y-axis travel:   1000 mm<br/>- z-axis travel:   1000 mm<br/>- rotating range c-axis from:      0 °<br/>- rotating range c-axis up to:    360 °<br/>table:  <br/>- table surface (left-right):   1250 mm<br/>- table surface (front-back):   1100 mm<br/>- clamping surface diameter:   1250 mm<br/>- workpiece load (max):   1500 kg<br/>- rotation axis: c:        <br/>- - mode of operation: automatic:        <br/>milling spindle / head:  <br/>- spindle revolutions (max):  18000 /min<br/>- tool fixture: hsk a63:        <br/>- spindle torque s6 40%:   4900 nm<br/>- spindle torque s1 100%:   3400 nm<br/>axis drives:  <br/>- rapid traverse x:  60000 mm/min<br/>- rapid traverse y:  60000 mm/min<br/>- rapid traverse z:  60000 mm/min<br/>tool magazine:  <br/>- magazin type: chain magazine:        <br/>- number of positions:     60  <br/>electrical specifications:  <br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   4600 mm<br/>- space requirements -front/back-:   4600 mm<br/>- total height:   3430 mm<br/>- total weight approx.:  19000 kg<br/>attachments:  <br/>- workpiece sensor: yes:        <br/>- chip conveyor: yes:        <br/>- coolant unit: yes:        <br/>- band filtration unit: yes:        <br/>- through spindle coolant attachment: yes:        <br/>- closed cabin: yes:        <br/>- european ce standards: yes:        <br/>- machines in very good condition !!<br/>- ± 0.01 manufacturing tolerance, no problem<br/>- 2019/1 new spindle used<br/>- is only used in 1 shift operation<br/>- approx. 81`500 hours of operation<br/><br/><br/>domestic equipments:<br/>- incl. tank and belt filter system (900liter)<br/><br/><br/><br/><br/> X TRAVEL: 1250 MM
Y TRAVEL: 1000 MM
Z TRAVEL: 1000 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 5
- .. AMONG OF THEM SIMULTANEOUS CNC AXES: 5
- X-AXIS TRAVEL: 1250 MM
- Y-AXIS TRAVEL: 1000 MM
- Z-AXIS TRAVEL: 1000 MM
- ROTATING RANGE C-AXIS FROM: 0 °
- ROTATING RANGE C-AXIS UP TO: 360 °
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1250 MM
- TABLE SURFACE (FRONT-BACK): 1100 MM
- CLAMPING SURFACE DIAMETER: 1250 MM
- WORKPIECE LOAD (MAX): 1500 KG
- ROTATION AXIS: C:
- - MODE OF OPERATION: AUTOMATIC:
MILLING SPINDLE / HEAD:
- SPINDLE REVOLUTIONS (MAX): 18000 /MIN
- TOOL FIXTURE: HSK A63:
- SPINDLE TORQUE S6 40%: 4900 NM
- SPINDLE TORQUE S1 100%: 3400 NM
AXIS DRIVES:
- RAPID TRAVERSE X: 60000 MM/MIN
- RAPID TRAVERSE Y: 60000 MM/MIN
- RAPID TRAVERSE Z: 60000 MM/MIN
TOOL MAGAZINE:
- MAGAZIN TYPE: CHAIN MAGAZINE:
- NUMBER OF POSITIONS: 60
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 4600 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 4600 MM
- TOTAL HEIGHT: 3430 MM
- TOTAL WEIGHT APPROX.: 19000 KG
ATTACHMENTS:
- WORKPIECE SENSOR: YES:
- CHIP CONVEYOR: YES:
- COOLANT UNIT: YES:
- BAND FILTRATION UNIT: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- CLOSED CABIN: YES:
- EUROPEAN CE STANDARDS: YES:
- MACHINES IN VERY GOOD CONDITION !!
- ± 0.01 MANUFACTURING TOLERANCE, NO PROBLEM
- 2019/1 NEW SPINDLE USED
- IS ONLY USED IN 1 SHIFT OPERATION
- APPROX. 81`500 HOURS OF OPERATION


DOMESTIC EQUIPMENTS:
- INCL. TANK AND BELT FILTER SYSTEM (900LITER)




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling machine khs innofill dmg / svf 120/16, 50 000 bph
 
khs innofill dmg is a mechanically controlled glass bottle filler has 120 filling head filler and a cap closing station with 16 heads. this unit has been filling beer in 0.33 and 0.5 liter glass bottles with crown corks, capacity 50 000 bph. filling level is determined by return gas tubes. this filler machine is designed to bottle beer, soft drinks, as well as non-carbonated beverages in glass bottles. all processing sequences of the innofill dmg are mechanically controlled for easy handling and operating. the machine is in good condition, still installed and powered but the production was stopped in year 2013
 
technical information:
 
machine type: khs innofill dmg / svf 120/16
serial number: 47527
manufacturing year: 2005
capacity: 50 000 bph in 0.5 liter bottles
bottle volumes: 0.1 l - 1.5 l
filling temperatures: 4 - 16 °c
bottle heights: 130 - 360 mm
bottle diameters: 40 - 100 mm   GLASS BOTTLE FILLING MACHINE KHS INNOFILL DMG / SVF 120/16, 50 000 BPH KHS INNOFILL DMG IS A MECHANICALLY CONTROLLED GLASS BOTTLE FILLER HAS 120 FILLING HEAD FILLER AND A CAP CLOSING STATION WITH 16 HEADS. THIS UNIT HAS BEEN FILLING BEER IN 0.33 AND 0.5 LITER GLASS BOTTLES WITH CROWN CORKS, CAPACITY 50 000 BPH. FILLING LEVEL IS DETERMINED BY RETURN GAS TUBES. THIS FILLER MACHINE IS DESIGNED TO BOTTLE BEER, SOFT DRINKS, AS WELL AS NON-CARBONATED BEVERAGES IN GLASS BOTTLES. ALL PROCESSING SEQUENCES OF THE INNOFILL DMG ARE MECHANICALLY CONTROLLED FOR EASY HANDLING AND OPERATING. THE MACHINE IS IN GOOD CONDITION, STILL INSTALLED AND POWERED BUT THE PRODUCTION WAS STOPPED IN YEAR 2013 TECHNICAL INFORMATION: MACHINE TYPE: KHS INNOFILL DMG / SVF 120/16 SERIAL NUMBER: 47527 MANUFACTURING YEAR: 2005 CAPACITY: 50 000 BPH IN 0.5 LITER BOTTLES BOTTLE VOLUMES: 0.1 L - 1.5 L FILLING TEMPERATURES: 4 - 16 °C BOTTLE HEIGHTS: 130 - 360 MM BOTTLE DIAMETERS: 40 - 100 MM
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-x travel:  mm<br/>y travel:  mm<br/>z travel:  mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- number of processing axes (excl parallel axes):      5  <br/>- .. among of them simultaneous cnc axes:      4  <br/>- x-axis travel:    800 mm<br/>- y-axis travel:    700 mm<br/>- z-axis travel:    600 mm<br/>- rotating range b-axis from:      0 °<br/>- rotating range b-axis up to:     90 °<br/>- rotating range c-axis from:      0 °<br/>- rotating range c-axis up to:    360 °<br/>table:  <br/>- table surface (front-back):    630 mm<br/>- clamping surface diameter:    900 mm<br/>- workpiece load (max):    800 kg<br/>milling spindle / head:  <br/>- spindle revolutions (max):   8000 /min<br/>- tool fixture: iso sk 40:        <br/>axis drives:  <br/>- feed velocity (max):  24000 mm/min<br/>- rapid traverse:  24000 mm/min<br/>tool magazine:  <br/>- number of positions:     60  <br/>- tool diameter max.:    160 mm<br/>- tool length max.:    350 mm<br/>electrical specifications:  <br/>- mains voltage:    400 v<br/>- mains frequency:     50 hz<br/>dimensions / weights:  <br/>- space requirements -left/right-:   5600 mm<br/>- space requirements -front/back-:   4500 mm<br/>- total height:   2500 mm<br/>- total weight approx.:  11500 kg<br/>attachments:  <br/>- chip conveyor: yes:        <br/>- coolant unit: yes:        <br/>- band filtration unit: yes:        <br/>- through spindle coolant attachment: yes:        <br/>- closed cabin: yes:        <br/>- european ce standards: yes:        <br/><br/><br/><br/><br/> X TRAVEL: MM
Y TRAVEL: MM
Z TRAVEL: MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 5
- .. AMONG OF THEM SIMULTANEOUS CNC AXES: 4
- X-AXIS TRAVEL: 800 MM
- Y-AXIS TRAVEL: 700 MM
- Z-AXIS TRAVEL: 600 MM
- ROTATING RANGE B-AXIS FROM: 0 °
- ROTATING RANGE B-AXIS UP TO: 90 °
- ROTATING RANGE C-AXIS FROM: 0 °
- ROTATING RANGE C-AXIS UP TO: 360 °
TABLE:
- TABLE SURFACE (FRONT-BACK): 630 MM
- CLAMPING SURFACE DIAMETER: 900 MM
- WORKPIECE LOAD (MAX): 800 KG
MILLING SPINDLE / HEAD:
- SPINDLE REVOLUTIONS (MAX): 8000 /MIN
- TOOL FIXTURE: ISO SK 40:
AXIS DRIVES:
- FEED VELOCITY (MAX): 24000 MM/MIN
- RAPID TRAVERSE: 24000 MM/MIN
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 60
- TOOL DIAMETER MAX.: 160 MM
- TOOL LENGTH MAX.: 350 MM
ELECTRICAL SPECIFICATIONS:
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 50 HZ
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 5600 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 4500 MM
- TOTAL HEIGHT: 2500 MM
- TOTAL WEIGHT APPROX.: 11500 KG
ATTACHMENTS:
- CHIP CONVEYOR: YES:
- COOLANT UNIT: YES:
- BAND FILTRATION UNIT: YES:
- THROUGH SPINDLE COOLANT ATTACHMENT: YES:
- CLOSED CABIN: YES:
- EUROPEAN CE STANDARDS: YES:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-traverse paths x - 1040 mm / y - 600 mm / z - 500 mm
table 1250 x 600 mm
speeds max. 8000 rpm installed make weis since 2017
changer 30 tools
recording sk 40 - internal coolant supply

4.achse full 4th axis lehmann 360.000 pos.

TRAVERSE PATHS X - 1040 MM / Y - 600 MM / Z - 500 MM TABLE 1250 X 600 MM SPEEDS MAX. 8000 RPM INSTALLED MAKE WEIS SINCE 2017 CHANGER 30 TOOLS RECORDING SK 40 - INTERNAL COOLANT SUPPLY 4.ACHSE FULL 4TH AXIS LEHMANN 360.000 POS.
Vendedor: Moser Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 600 mm<br>turning length: 1190 mm<br>turret positions: 12<br>cnc brand: _unknown / other<br>cnc model: dmg <br><p>mach-id   4206</p>
<p>make       dmg</p>
<p>type         nef 600</p>
<p>year         2009</p>
<p>specifications</p>
<p>swing over bed     600</p>
<p>distance between centres   1.190</p>
<p>power kw liove tools    4500 rpm</p>
<p>x axis      398</p>
<p>controll      heidenhain cnc pilot 4290</p>
<p>tool changer     12</p>
<p>chip conveyor    yes</p>
<p>swing over bed Ø     600 mm</p>
<p>dimensions</p>
<p>length       3550 mm</p>
<p>width         2700 mm</p>
<p>height        1900 mm</p>
<p>chuck rota-s plus 315 </p>
<p>dmg nef 600 cnc lathe with live tools</p>
<p>
TURNING DIAMETER: 600 MM
TURNING LENGTH: 1190 MM
TURRET POSITIONS: 12
CNC BRAND: _UNKNOWN / OTHER
CNC MODEL: DMG

MACH-ID&NBSP; &NBSP;4206

MAKE&NBSP; &NBSP; &NBSP; &NBSP;DMG

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;NEF 600

YEAR&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2009

SPECIFICATIONS

SWING OVER BED&NBSP; &NBSP; &NBSP;600

DISTANCE BETWEEN CENTRES&NBSP; &NBSP;1.190

POWER KW LIOVE TOOLS&NBSP; &NBSP; 4500 RPM

X AXIS&NBSP; &NBSP; &NBSP; 398

CONTROLL&NBSP; &NBSP; &NBSP; HEIDENHAIN CNC PILOT 4290

TOOL CHANGER&NBSP; &NBSP; &NBSP;12

CHIP CONVEYOR&NBSP; &NBSP; YES

SWING OVER BED Ø&NBSP; &NBSP; &NBSP;600 MM

DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; &NBSP;3550 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2700 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP; 1900 MM

CHUCK ROTA-S PLUS 315&NBSP;

DMG NEF 600 CNC LATHE WITH LIVE TOOLS

Vendedor: Mach4metal
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-
type of machine tool room milling machine - universal make maho type mh 800 c built in 1992 control type cnc storage france country of origin germany delivery immediately cargo base stock technical details

x way 800 mm y-way 500 mm z-way 550 mm speed 20-5000 rpm tool holder sk 40 vertical quill stroke 80 mm feed 1-5000 mm / min rapid traverse 6000 mm / min table size 900 x 610 mm overall power demand 16 kva machine weight 4.8 tons of space approximately 2.4 x 2.85 x 2 , 1 m additional information

-with train control cnc 532 - 2 axis rotary table
 with tool changer
 -housing

engine power vorfã¼hrbereit. TYPE OF MACHINE TOOL ROOM MILLING MACHINE - UNIVERSAL MAKE MAHO TYPE MH 800 C BUILT IN 1992 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS X WAY 800 MM Y-WAY 500 MM Z-WAY 550 MM SPEED 20-5000 RPM TOOL HOLDER SK 40 VERTICAL QUILL STROKE 80 MM FEED 1-5000 MM / MIN RAPID TRAVERSE 6000 MM / MIN TABLE SIZE 900 X 610 MM OVERALL POWER DEMAND 16 KVA MACHINE WEIGHT 4.8 TONS OF SPACE APPROXIMATELY 2.4 X 2.85 X 2 , 1 M ADDITIONAL INFORMATION -WITH TRAIN CONTROL CNC 532 - 2 AXIS ROTARY TABLE WITH TOOL CHANGER -HOUSING ENGINE POWER VORF&ATILDE;&FRAC14;HRBEREIT.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-travel -x axis: 800 mm<br/>travel -y axis: 530 mm<br/>travel -z axis: 510 mm<br/>table-size: 600 x 1.100 mm<br/>max. table load: 1.000 kg<br/>number of spindle speeds, with increased torque: 12.000 1/min<br/>control: fanuc celos - ergoline <br/>number of working hours: 1.100 h<br/>tool holder: bt-40 <br/>tool piece magazine with: 30 <br/>- - like new - -<br/><br/>incl. renishaw - probe + workpiece adjuster<br/><br/>-------------------------------------------------- -------------------<br/>the machine is in a like new condition<br/>and can be inspected at any time in the swiss factory.<br/><br/>the machine has worked exclusively for demonstration purposes and<br/>has only 1,100h operating hours.<br/><br/>video of machine on request available.<br/><br/>machine will be geometrically tested before handing over!<br/><br/><br/><br/><br/><br/> TRAVEL -X AXIS: 800 MM
TRAVEL -Y AXIS: 530 MM
TRAVEL -Z AXIS: 510 MM
TABLE-SIZE: 600 X 1.100 MM
MAX. TABLE LOAD: 1.000 KG
NUMBER OF SPINDLE SPEEDS, WITH INCREASED TORQUE: 12.000 1/MIN
CONTROL: FANUC CELOS - ERGOLINE
NUMBER OF WORKING HOURS: 1.100 H
TOOL HOLDER: BT-40
TOOL PIECE MAGAZINE WITH: 30
- - LIKE NEW - -

INCL. RENISHAW - PROBE + WORKPIECE ADJUSTER

-------------------------------------------------- -------------------
THE MACHINE IS IN A LIKE NEW CONDITION
AND CAN BE INSPECTED AT ANY TIME IN THE SWISS FACTORY.

THE MACHINE HAS WORKED EXCLUSIVELY FOR DEMONSTRATION PURPOSES AND
HAS ONLY 1,100H OPERATING HOURS.

VIDEO OF MACHINE ON REQUEST AVAILABLE.

MACHINE WILL BE GEOMETRICALLY TESTED BEFORE HANDING OVER!





Vendedor: STEINHAND GmbH
Año de construcción: usado
Precio: 55.000 €
Ubicación: Land-
machine type machining center - vertical make dmg mori type ecomill 600 v year 2016 control type cnc storage france origin - delivery time upon request of freight base from site technical details

x way 600 mm y way 560 mm z-way 510 mm control siemens 840 d sl 19zoll maximum speed 12,000 min / -1 power - spindle 13 / 9 kw maximum torque of 82 / 54 nm tool recording sk 40 distance spindle nose and table 120-630 mm table size 900 x 560 mm 
maximum table load 600 kg t-slots 5 working height 850 mm number of tool stations 30 pos. 
toolholder sk 40 max tool diameter 80 mm max werkzeugdurch. free neighboring box. 125 mm maximum tool length 300 mm of maximum tool weight 8.0 kg rapid traverse 30 m/min feed force 5 kn speed of max 30, 000 mm / min total power 32 kva machine weight approx. 5,0 t space requirement approx. 4,0 x 5,0 x 3,0 m accessories documentation cooling with tele n71 probe tool measuring electr. wheel washing equipment cnc - machining center vertical conveyors
 dmg mori - ecomill 600 v
 super condition only 1000 spindle hours MACHINE TYPE MACHINING CENTER - VERTICAL MAKE DMG MORI TYPE ECOMILL 600 V YEAR 2016 CONTROL TYPE CNC STORAGE FRANCE ORIGIN - DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS X WAY 600 MM Y WAY 560 MM Z-WAY 510 MM CONTROL SIEMENS 840 D SL 19ZOLL MAXIMUM SPEED 12,000 MIN / -1 POWER - SPINDLE 13 / 9 KW MAXIMUM TORQUE OF 82 / 54 NM TOOL RECORDING SK 40 DISTANCE SPINDLE NOSE AND TABLE 120-630 MM TABLE SIZE 900 X 560 MM MAXIMUM TABLE LOAD 600 KG T-SLOTS 5 WORKING HEIGHT 850 MM NUMBER OF TOOL STATIONS 30 POS. TOOLHOLDER SK 40 MAX TOOL DIAMETER 80 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 125 MM MAXIMUM TOOL LENGTH 300 MM OF MAXIMUM TOOL WEIGHT 8.0 KG RAPID TRAVERSE 30 M/MIN FEED FORCE 5 KN SPEED OF MAX 30, 000 MM / MIN TOTAL POWER 32 KVA MACHINE WEIGHT APPROX. 5,0 T SPACE REQUIREMENT APPROX. 4,0 X 5,0 X 3,0 M ACCESSORIES DOCUMENTATION COOLING WITH TELE N71 PROBE TOOL MEASURING ELECTR. WHEEL WASHING EQUIPMENT CNC - MACHINING CENTER VERTICAL CONVEYORS DMG MORI - ECOMILL 600 V SUPER CONDITION ONLY 1000 SPINDLE HOURS
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-x-travel:3.600 mm<br/>y-travel:920 mm<br/>z-travel:820 mm<br/>table surface area:4.200 x 900 mm<br/>table load:4,2 t<br/>control:siemens 840 d powerline <br/>turning speeds:20 - 12.000 1/min<br/>taper iso:hsk a 63 <br/>rapid motion - x-axis:100 m/min<br/>rapid motion - y-axis:60 m/min<br/>rapid traverse z-axis:60 m/min<br/>tool change unit:120 plus 10  for oversize  pos.<br/>spindle drive:35 / 25 kw<br/>total power requirement:92 kva<br/>weight of the machine ca.:30 t<br/>dimensions of the machine ca.:3,7 x 7 x 2,98 m<br/><br/>5-axis machining center, original dmg universal round table  d = 555 mm   working horizontal or vertical      b-axis in head, 2x rotoclear, autom. doors, cleaning device for hsk 63, chip conveyor, mode 4, el. handwheel, prepared for dmg netservice, toolchanger for 120 tools, 10 pockets for oversize tools, X-TRAVEL:3.600 MM
Y-TRAVEL:920 MM
Z-TRAVEL:820 MM
TABLE SURFACE AREA:4.200 X 900 MM
TABLE LOAD:4,2 T
CONTROL:SIEMENS 840 D POWERLINE
TURNING SPEEDS:20 - 12.000 1/MIN
TAPER ISO:HSK A 63
RAPID MOTION - X-AXIS:100 M/MIN
RAPID MOTION - Y-AXIS:60 M/MIN
RAPID TRAVERSE Z-AXIS:60 M/MIN
TOOL CHANGE UNIT:120 PLUS 10 FOR OVERSIZE POS.
SPINDLE DRIVE:35 / 25 KW
TOTAL POWER REQUIREMENT:92 KVA
WEIGHT OF THE MACHINE CA.:30 T
DIMENSIONS OF THE MACHINE CA.:3,7 X 7 X 2,98 M

5-AXIS MACHINING CENTER, ORIGINAL DMG UNIVERSAL ROUND TABLE D = 555 MM WORKING HORIZONTAL OR VERTICAL B-AXIS IN HEAD, 2X ROTOCLEAR, AUTOM. DOORS, CLEANING DEVICE FOR HSK 63, CHIP CONVEYOR, MODE 4, EL. HANDWHEEL, PREPARED FOR DMG NETSERVICE, TOOLCHANGER FOR 120 TOOLS, 10 POCKETS FOR OVERSIZE TOOLS,
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 40.000 €
Ubicación: Land-with pallet changer
x-travel: 635mm
y-travel: 510mm
z-travel: 450mm,
spindle speed: 18,000/min, 
table dimensions: 560x790mm
number of tool slots: 20

control unit: siemens 840dsl  WITH PALLET CHANGER X-TRAVEL: 635MM Y-TRAVEL: 510MM Z-TRAVEL: 450MM, SPINDLE SPEED: 18,000/MIN, TABLE DIMENSIONS: 560X790MM NUMBER OF TOOL SLOTS: 20 CONTROL UNIT: SIEMENS 840DSL
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-travel -x axis: 1040 mm<br/>travel -y axis: 600 mm<br/>travel -z axis: 500 mm<br/>control: heidenhain <br/>turning speed range - power take off spindle: 12000 u/min<br/>4 axis simultaneous - dmg dmc 104 v linear<br/><br/>- 4th axle lehmann _ ea-410.2a<br/>- chip conveyor<br/>- itc<br/>-30-position pick-up changer with round magazine<br/><br/>the machine has only 11500 h spindle hours.<br/><br/><br/><br/><br/><br/> TRAVEL -X AXIS: 1040 MM
TRAVEL -Y AXIS: 600 MM
TRAVEL -Z AXIS: 500 MM
CONTROL: HEIDENHAIN
TURNING SPEED RANGE - POWER TAKE OFF SPINDLE: 12000 U/MIN
4 AXIS SIMULTANEOUS - DMG DMC 104 V LINEAR

- 4TH AXLE LEHMANN _ EA-410.2A
- CHIP CONVEYOR
- ITC
-30-POSITION PICK-UP CHANGER WITH ROUND MAGAZINE

THE MACHINE HAS ONLY 11500 H SPINDLE HOURS.





Vendedor: ADEM Maschinen GmbH
Año de construcción: usado
Precio: 30.000 €
Ubicación: Land-x,y,z travel 635,510,460 mm
table size 790x560 mm
control unit heidenhain tnc620
spindle speed 8000 rpm
spindle taper sk40
number of tools in magazine 20
power on time 31.000 h
spindle running time 20.100 h  X,Y,Z TRAVEL 635,510,460 MM TABLE SIZE 790X560 MM CONTROL UNIT HEIDENHAIN TNC620 SPINDLE SPEED 8000 RPM SPINDLE TAPER SK40 NUMBER OF TOOLS IN MAGAZINE 20 POWER ON TIME 31.000 H SPINDLE RUNNING TIME 20.100 H
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Ubicación: Land-turning diameter: 420 mm<br/>turning length: 1000 mm<br/>control: epl <br/><br/><br/><br/><br/> TURNING DIAMETER: 420 MM
TURNING LENGTH: 1000 MM
CONTROL: EPL




Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land--these can be sent to documents attached version according to request
-4./5.-rundachse on request
delivery date in early august
 -THESE CAN BE SENT TO DOCUMENTS ATTACHED VERSION ACCORDING TO REQUEST -4./5.-RUNDACHSE ON REQUEST DELIVERY DATE IN EARLY AUGUST
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-x-travel:400 mm<br/>y-travel:400 mm<br/>z-travel:375 mm<br/>turning speeds:18.000 1/min<br/>tool taper:hsk 63 <br/>control:heidenhain itnc 530 hcsi <br/>tool change unit:30 pos.<br/>table surface area:450 x 400 mm<br/>rapid traverse:80 m/min<br/>spindle:35 / 25 kw<br/>total power requirement:49 kva<br/>weight of the machine ca.:6,9 t<br/>dimensions of the machine ca.: m<br/><br/>5- axis machine with round-swivelling table -5° to +110°, c-axis 360°, dynamic package with rpid feed 80m/min, direct measuring system, internal coolant supply 40bar, 600l, prepared for erowa handling system, rotary joint at nc-rotary-swivelling table, 4 channels, chipconveyor, 3d-touch probe ts 649, 3d quickset flush gun, air blast through spindle, oil mist suction (mechanical), signal lamp, el.handwheel, mode4, load factor display dmg netservice client, dxf import, atc software,  approx 23.900h \ X-TRAVEL:400 MM
Y-TRAVEL:400 MM
Z-TRAVEL:375 MM
TURNING SPEEDS:18.000 1/MIN
TOOL TAPER:HSK 63
CONTROL:HEIDENHAIN ITNC 530 HCSI
TOOL CHANGE UNIT:30 POS.
TABLE SURFACE AREA:450 X 400 MM
RAPID TRAVERSE:80 M/MIN
SPINDLE:35 / 25 KW
TOTAL POWER REQUIREMENT:49 KVA
WEIGHT OF THE MACHINE CA.:6,9 T
DIMENSIONS OF THE MACHINE CA.: M

5- AXIS MACHINE WITH ROUND-SWIVELLING TABLE -5° TO +110°, C-AXIS 360°, DYNAMIC PACKAGE WITH RPID FEED 80M/MIN, DIRECT MEASURING SYSTEM, INTERNAL COOLANT SUPPLY 40BAR, 600L, PREPARED FOR EROWA HANDLING SYSTEM, ROTARY JOINT AT NC-ROTARY-SWIVELLING TABLE, 4 CHANNELS, CHIPCONVEYOR, 3D-TOUCH PROBE TS 649, 3D QUICKSET FLUSH GUN, AIR BLAST THROUGH SPINDLE, OIL MIST SUCTION (MECHANICAL), SIGNAL LAMP, EL.HANDWHEEL, MODE4, LOAD FACTOR DISPLAY DMG NETSERVICE CLIENT, DXF IMPORT, ATC SOFTWARE, APPROX 23.900H \"MACHINE ON\", APPROX. 10.300H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-5-axis machining center-
dmg dmu 40 mono block year of manufacture: 2008
control: heidenhain 530
spindle hours: ~ 8300 h (as of 21.11.2018)

bd7ws08tex

traverse path x-axis: 450 mm
stroke y axis: 400 mm
z axis travel: 480 mm

number of tools: 16 st
changer: plate magazine

maximum spindle speed: 24000 1/min
tool holder: hsk-a63

table diameter: 450 mm
table load: 250 kg max

facilities:

chip conveyor
probe ts 649
blum laser tool measurement
coolant tank 250 l
preparation for internal cooling

a current measurement log from feb. 2019 is available 5-AXIS MACHINING CENTER- DMG DMU 40 MONO BLOCK YEAR OF MANUFACTURE: 2008 CONTROL: HEIDENHAIN 530 SPINDLE HOURS: ~ 8300 H (AS OF 21.11.2018) BD7WS08TEX TRAVERSE PATH X-AXIS: 450 MM STROKE Y AXIS: 400 MM Z AXIS TRAVEL: 480 MM NUMBER OF TOOLS: 16 ST CHANGER: PLATE MAGAZINE MAXIMUM SPINDLE SPEED: 24000 1/MIN TOOL HOLDER: HSK-A63 TABLE DIAMETER: 450 MM TABLE LOAD: 250 KG MAX FACILITIES: CHIP CONVEYOR PROBE TS 649 BLUM LASER TOOL MEASUREMENT COOLANT TANK 250 L PREPARATION FOR INTERNAL COOLING A CURRENT MEASUREMENT LOG FROM FEB. 2019 IS AVAILABLE
Vendedor: RG-Tools GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 600 mm<br/>z-travel: 520 mm<br/>control: heidenhain itnc 530<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 600 MM
Z-TRAVEL: 520 MM
CONTROL: HEIDENHAIN ITNC 530




Vendedor: 5X Machines GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of production 1997

technical parameters:

-cutting length 3800 mm
-cutting width 2500 mm

-main engine 2 x 4 kw
-motor scoring 2 x 1.1 kw
-track adjustment engine 2 kw

-disc diameter 350 mm
-diameter scoring 120 mm

-diameter 2 x 130 mm
-cutting height adjustment

overall dimensions of the machine:

-length: 420 cm
width 140 cm
-height 120 cm

-weight ~ 800 kg -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF PRODUCTION 1997 TECHNICAL PARAMETERS: -CUTTING LENGTH 3800 MM -CUTTING WIDTH 2500 MM -MAIN ENGINE 2 X 4 KW -MOTOR SCORING 2 X 1.1 KW -TRACK ADJUSTMENT ENGINE 2 KW -DISC DIAMETER 350 MM -DIAMETER SCORING 120 MM -DIAMETER 2 X 130 MM -CUTTING HEIGHT ADJUSTMENT OVERALL DIMENSIONS OF THE MACHINE: -LENGTH: 420 CM WIDTH 140 CM -HEIGHT 120 CM -WEIGHT ~ 800 KG
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 700 mm<br/>z-travel: 600 mm<br/>control: mill plus <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/>  cnc control millplus<br/>  x-axis 800mm<br/>  y-axis 700mm<br/>  z-axis 600mm<br/>  rapid traverse 30m / min<br/>  speed 8000 rpm<br/>  swivel head horizontal / vertical<br/>  sk40 <br/>  tool storage 120 tools<br/>  pallet storage rs4<br/>  coolant through spindle<br/>  1000l coolant<br/>  3d button<br/>  clamping surface, pallet d800 x 630<br/>  table load 800 kg<br/><br/><br/><br/><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 700 MM
Z-TRAVEL: 600 MM
CONTROL: MILL PLUS
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

CNC CONTROL MILLPLUS
X-AXIS 800MM
Y-AXIS 700MM
Z-AXIS 600MM
RAPID TRAVERSE 30M / MIN
SPEED 8000 RPM
SWIVEL HEAD HORIZONTAL / VERTICAL
SK40
TOOL STORAGE 120 TOOLS
PALLET STORAGE RS4
COOLANT THROUGH SPINDLE
1000L COOLANT
3D BUTTON
CLAMPING SURFACE, PALLET D800 X 630
TABLE LOAD 800 KG




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-parameters:
type of machine: cnc 5-axis universal machine center.
manufacturer: dmg (deckel-maho).

model: dmu 50 v.
dmu 50 v
producer: dmg
chuck surface: 500 x 380 meters
x axis: 500 mm
y axis: 450 mm
axis z: 400 mm
spindle speed: 0-15000/min.
controlled axes: 5
machine weight: 5500kg PARAMETERS: TYPE OF MACHINE: CNC 5-AXIS UNIVERSAL MACHINE CENTER. MANUFACTURER: DMG (DECKEL-MAHO). MODEL: DMU 50 V. DMU 50 V PRODUCER: DMG CHUCK SURFACE: 500 X 380 METERS X AXIS: 500 MM Y AXIS: 450 MM AXIS Z: 400 MM SPINDLE SPEED: 0-15000/MIN. CONTROLLED AXES: 5 MACHINE WEIGHT: 5500KG
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-x-travel:800 mm<br/>y-travel:700 mm<br/>z-travel:600 mm<br/>c-axis:360.000 x 0,001 grad<br/>pallet size::800 x 630 mm<br/>workpiece weight:800  kg<br/>spindle taper:hsk 63 <br/>number of spindle speeds:18000 u/min<br/>spindle motor:12 kw<br/>no. of tools in the magazine:120 stück<br/>table turning speeds:13,6 u/min<br/>weight of the machine ca.:10,5 t<br/>total power requirement:59 kva<br/>dimensions of the machine ca.:8,1 x 6,2 x 3,2 m<br/><br/>5-axis machining center with siemens 840 d cnc control - nc rotary table c-axis - swivable head b-axis -7,3° until + 180° - palette changer - tool changer for 120 tools - coolant through spindle - chip conveyor, coolant device - handheld control panel - new spindle in 2015 X-TRAVEL:800 MM
Y-TRAVEL:700 MM
Z-TRAVEL:600 MM
C-AXIS:360.000 X 0,001 GRAD
PALLET SIZE::800 X 630 MM
WORKPIECE WEIGHT:800 KG
SPINDLE TAPER:HSK 63
NUMBER OF SPINDLE SPEEDS:18000 U/MIN
SPINDLE MOTOR:12 KW
NO. OF TOOLS IN THE MAGAZINE:120 STüCK
TABLE TURNING SPEEDS:13,6 U/MIN
WEIGHT OF THE MACHINE CA.:10,5 T
TOTAL POWER REQUIREMENT:59 KVA
DIMENSIONS OF THE MACHINE CA.:8,1 X 6,2 X 3,2 M

5-AXIS MACHINING CENTER WITH SIEMENS 840 D CNC CONTROL - NC ROTARY TABLE C-AXIS - SWIVABLE HEAD B-AXIS -7,3° UNTIL + 180° - PALETTE CHANGER - TOOL CHANGER FOR 120 TOOLS - COOLANT THROUGH SPINDLE - CHIP CONVEYOR, COOLANT DEVICE - HANDHELD CONTROL PANEL - NEW SPINDLE IN 2015
Vendedor: Schiess-Moweg GmbH
Año de construcción: usado
Ubicación: Land-used kitagawa roundtable mrm 320
control mac mini ih (m-code enabled)

faceplate diameter mm 320
max. spindle passage mm 105
center height 225 mm
max. speed min-1 25
weight kg 135 

useable for mazak - dmg - hermle - hedelius - spinner machines USED KITAGAWA ROUNDTABLE MRM 320 CONTROL MAC MINI IH (M-CODE ENABLED) FACEPLATE DIAMETER MM 320 MAX. SPINDLE PASSAGE MM 105 CENTER HEIGHT 225 MM MAX. SPEED MIN-1 25 WEIGHT KG 135 USEABLE FOR MAZAK - DMG - HERMLE - HEDELIUS - SPINNER MACHINES
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 324 mm<br/>turning length: 600 mm<br/>control: heidenhain <br/>chuck: 210 mm<br/>chuck: 150 mm<br/>turning speeds: 5000 u/min<br/>turning speeds: 2000 u/min<br/>tool change unit: 12 <br/>bar loader: lod lns <br/>type: quick load servo 3<br/>length: 1500 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> TURNING DIAMETER: 324 MM
TURNING LENGTH: 600 MM
CONTROL: HEIDENHAIN
CHUCK: 210 MM
CHUCK: 150 MM
TURNING SPEEDS: 5000 U/MIN
TURNING SPEEDS: 2000 U/MIN
TOOL CHANGE UNIT: 12
BAR LOADER: LOD LNS
TYPE: QUICK LOAD SERVO 3
LENGTH: 1500 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Ubicación: Land-cnc 5-axis universal machining center

workspace in x: 500 mm
workspace in y: 380 mm
workspace in z: 380 mm
table size: 500 x 380 mm
tool holder: sk 40
speed range: 20-15000 rpm
spindle drive: 10 / 15 kw
total power consumption: approx. 17 kw / 400 v
machine weight: approx. 4400 kg

equipment / accessories:

cnc controller heidenhain tnc 426-5 axes simultaneous
nc rotary table dia. 500. x 380 mm
24 pocket tool changer
electr. handwheel
coolant system
pole-reversible motor

all technical data are created according to our best knowledge, as well as vorhander documents; expressly reserved by mistake.
the baz can be tested before purchase in our factory under power.
 CNC 5-AXIS UNIVERSAL MACHINING CENTER WORKSPACE IN X: 500 MM WORKSPACE IN Y: 380 MM WORKSPACE IN Z: 380 MM TABLE SIZE: 500 X 380 MM TOOL HOLDER: SK 40 SPEED RANGE: 20-15000 RPM SPINDLE DRIVE: 10 / 15 KW TOTAL POWER CONSUMPTION: APPROX. 17 KW / 400 V MACHINE WEIGHT: APPROX. 4400 KG EQUIPMENT / ACCESSORIES: CNC CONTROLLER HEIDENHAIN TNC 426-5 AXES SIMULTANEOUS NC ROTARY TABLE DIA. 500. X 380 MM 24 POCKET TOOL CHANGER ELECTR. HANDWHEEL COOLANT SYSTEM POLE-REVERSIBLE MOTOR ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE, AS WELL AS VORHANDER DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. THE BAZ CAN BE TESTED BEFORE PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-x-travel: 650 mm<br/>y-travel: 500 mm<br/>z-travel: 500 mm<br/>control: sinumerik 840 d <br/>tool taper: hsk 63a <br/>spindle speed:: 1-18.000 1/min<br/>tool magazin:: 23 (30) <br/>table surface area: 850 x 600 mm<br/>number of working hours: 36115 h<br/>rapid travel x/y/z: 60 m/min<br/>feed: 60.000 mm/min<br/>weight of tools max.: 8 kg<br/>tool length - max.: 300 mm<br/>diameter of tools max.: 100 mm<br/>wotkpiece diameter with 2 vacant positions: 140 mm<br/>table load: 1,5 t<br/>t-slot - distance: 100 mm<br/>t-slot - width: 14 mm<br/>total power requirement: 15 kw<br/>weight of the machine ca.: 9,1 t<br/>dimensions of the machine ca.: 3,5 x 4,5 x 3,1 m<br/><br/><br/><br/><br/> X-TRAVEL: 650 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 500 MM
CONTROL: SINUMERIK 840 D
TOOL TAPER: HSK 63A
SPINDLE SPEED:: 1-18.000 1/MIN
TOOL MAGAZIN:: 23 (30)
TABLE SURFACE AREA: 850 X 600 MM
NUMBER OF WORKING HOURS: 36115 H
RAPID TRAVEL X/Y/Z: 60 M/MIN
FEED: 60.000 MM/MIN
WEIGHT OF TOOLS MAX.: 8 KG
TOOL LENGTH - MAX.: 300 MM
DIAMETER OF TOOLS MAX.: 100 MM
WOTKPIECE DIAMETER WITH 2 VACANT POSITIONS: 140 MM
TABLE LOAD: 1,5 T
T-SLOT - DISTANCE: 100 MM
T-SLOT - WIDTH: 14 MM
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 9,1 T
DIMENSIONS OF THE MACHINE CA.: 3,5 X 4,5 X 3,1 M




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-vertical turning lathe dmg mori ctv 250
year of constr.: 2017
1. machine linkee execution
full cylinder
-schranierbandspã¤nefã¶rderer
-4-color sign luminaire
-running umrã¼sten free workpiece transport system in the towing frame version without towing frame
-without foot switch
technical data
workspace:
plan travel: 700 mm
longitudinal travel: 300 mm
chuck diameter of max 250 mm
feed rate and rapid traverse:
rapid traverse in x: 60 m / min
rapid traverse in z: 40 m / min
spindle:
spindle head size: 170 h 5 mm
spindle bore: 57 mm
spindle diameter in front bearing: 120 mm
main drive 1:
power: 25 kw
speed range from - until: 20 5000 rpm
torque: 280 nm VERTICAL TURNING LATHE DMG MORI CTV 250 YEAR OF CONSTR.: 2017 1. MACHINE LINKEE EXECUTION FULL CYLINDER -SCHRANIERBANDSP&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDERER -4-COLOR SIGN LUMINAIRE -RUNNING UMR&ATILDE;&FRAC14;STEN FREE WORKPIECE TRANSPORT SYSTEM IN THE TOWING FRAME VERSION WITHOUT TOWING FRAME -WITHOUT FOOT SWITCH TECHNICAL DATA WORKSPACE: PLAN TRAVEL: 700 MM LONGITUDINAL TRAVEL: 300 MM CHUCK DIAMETER OF MAX 250 MM FEED RATE AND RAPID TRAVERSE: RAPID TRAVERSE IN X: 60 M / MIN RAPID TRAVERSE IN Z: 40 M / MIN SPINDLE: SPINDLE HEAD SIZE: 170 H 5 MM SPINDLE BORE: 57 MM SPINDLE DIAMETER IN FRONT BEARING: 120 MM MAIN DRIVE 1: POWER: 25 KW SPEED RANGE FROM - UNTIL: 20 5000 RPM TORQUE: 280 NM
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 600 mm<br/>y-travel: 525 mm<br/>z-travel: 500 mm<br/>control: millplus <br/>table surface area: Ø 750 x 520 mm<br/>tool taper: sk 40 <br/>milling head speed: 20 - 6300 u/min<br/>milling spindle motor: 9/13 kw<br/>feed speeds infinitely variable: 20 - 10000 mm/min<br/>rapid traverse longitudinal and cross: 18 m/min<br/>rapid traverse vertical: 15 m/min<br/>numbers of positions in the tool changer: 25 <br/>wotkpiece diameter with 2 vacant positions: 160 mm<br/>workpiece diameter at full load: 80 mm<br/>workpiece length: 315 mm<br/>workpiece weight max.: 8 kg<br/>total power requirement:  kw<br/>weight of the machine ca.: 4,1 t<br/>dimensions of the machine ca.: 3,2 x 2,86 x 2,25 m<br/>* 3d-path control heidenhain millplus <br/>* automatic tool changer atc 25 <br/>* universal table Ø 750 x 520 mm (rotating, swiveling and tilting) <br/>* coolant device<br/>* complete casing with sliding doors<br/>* vertical milling head swiveling off to the side<br/>* machine lamp<br/>* stepless programable feed speed<br/>* hydr./mech. tool clamping<br/>* only 3469 spindle hours (according to meter)<br/><br/>machine with very little operating hours, in excellent condition.<br/><br/><br/><br/><br/><br/> X-TRAVEL: 600 MM
Y-TRAVEL: 525 MM
Z-TRAVEL: 500 MM
CONTROL: MILLPLUS
TABLE SURFACE AREA: Ø 750 X 520 MM
TOOL TAPER: SK 40
MILLING HEAD SPEED: 20 - 6300 U/MIN
MILLING SPINDLE MOTOR: 9/13 KW
FEED SPEEDS INFINITELY VARIABLE: 20 - 10000 MM/MIN
RAPID TRAVERSE LONGITUDINAL AND CROSS: 18 M/MIN
RAPID TRAVERSE VERTICAL: 15 M/MIN
NUMBERS OF POSITIONS IN THE TOOL CHANGER: 25
WOTKPIECE DIAMETER WITH 2 VACANT POSITIONS: 160 MM
WORKPIECE DIAMETER AT FULL LOAD: 80 MM
WORKPIECE LENGTH: 315 MM
WORKPIECE WEIGHT MAX.: 8 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 4,1 T
DIMENSIONS OF THE MACHINE CA.: 3,2 X 2,86 X 2,25 M
* 3D-PATH CONTROL HEIDENHAIN MILLPLUS
* AUTOMATIC TOOL CHANGER ATC 25
* UNIVERSAL TABLE Ø 750 X 520 MM (ROTATING, SWIVELING AND TILTING)
* COOLANT DEVICE
* COMPLETE CASING WITH SLIDING DOORS
* VERTICAL MILLING HEAD SWIVELING OFF TO THE SIDE
* MACHINE LAMP
* STEPLESS PROGRAMABLE FEED SPEED
* HYDR./MECH. TOOL CLAMPING
* ONLY 3469 SPINDLE HOURS (ACCORDING TO METER)

MACHINE WITH VERY LITTLE OPERATING HOURS, IN EXCELLENT CONDITION.





Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)