35 ofertas

Año de construcción: usado
Ubicación: Land-m. no.: 41595/05
equipment / additional information:
cooling and temperature control of water flow. the ultracool can be used to cool down lasers, ozone generators, plastic applications, vacuum pumps, cutting and welding machines, solvents recovery, x-ray machines, and many others. the ultracool chillers increase productivity, shorten cycle time and reduce manufacturing costs. 
 M. NO.: 41595/05 EQUIPMENT / ADDITIONAL INFORMATION: COOLING AND TEMPERATURE CONTROL OF WATER FLOW. THE ULTRACOOL CAN BE USED TO COOL DOWN LASERS, OZONE GENERATORS, PLASTIC APPLICATIONS, VACUUM PUMPS, CUTTING AND WELDING MACHINES, SOLVENTS RECOVERY, X-RAY MACHINES, AND MANY OTHERS. THE ULTRACOOL CHILLERS INCREASE PRODUCTIVITY, SHORTEN CYCLE TIME AND REDUCE MANUFACTURING COSTS.
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Ubicación: Land-grinder classifier system, make mikropul gmbh, type acm-10, material stainless steel, grinding room size dia. 310mm, fixed hammers, with grinding track, inlet dia. 50mm, feeding with rotating valve, motor 7,5 kw 380 volt , 1,1 kw 220/380 volt, mounted on frame, with switchgear, floorspace ± 3,3 x 2,2 m, total height 2,7 m, weight ± 1600 kg, extra specifications 1x ventilator van tongeren kennemer type s395/3/4800 11kw, 400/690 volt, 1x dosing screw dia. 225mm 0,37 kw, 220/380 volt, 1x dustcollector donaldson tdp675 230 volt, 1x cyclonefilter :van tongeren kennemer type ac850/3.0, 1x cabinet. +++ overhauled +++size reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! GRINDER CLASSIFIER SYSTEM, MAKE MIKROPUL GMBH, TYPE ACM-10, MATERIAL STAINLESS STEEL, GRINDING ROOM SIZE DIA. 310MM, FIXED HAMMERS, WITH GRINDING TRACK, INLET DIA. 50MM, FEEDING WITH ROTATING VALVE, MOTOR 7,5 KW 380 VOLT , 1,1 KW 220/380 VOLT, MOUNTED ON FRAME, WITH SWITCHGEAR, FLOORSPACE ± 3,3 X 2,2 M, TOTAL HEIGHT 2,7 M, WEIGHT ± 1600 KG, EXTRA SPECIFICATIONS 1X VENTILATOR VAN TONGEREN KENNEMER TYPE S395/3/4800 11KW, 400/690 VOLT, 1X DOSING SCREW DIA. 225MM 0,37 KW, 220/380 VOLT, 1X DUSTCOLLECTOR DONALDSON TDP675 230 VOLT, 1X CYCLONEFILTER :VAN TONGEREN KENNEMER TYPE AC850/3.0, 1X CABINET. +++ OVERHAULED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-donaldson dv 1800 off 1,800 mâ³/h, 16/20 bar cold air tockner / air cooler-dryer, 30 mâ² / min, cooling air needs 4,800 m â³/h, cooling water requirements 1 mâ³/h, german machine, year 2009 DONALDSON DV 1800 OFF 1,800 M³/H, 16/20 BAR COLD AIR TOCKNER / AIR COOLER-DRYER, 30 M² / MIN, COOLING AIR NEEDS 4,800 M ³/H, COOLING WATER REQUIREMENTS 1 M³/H, GERMAN MACHINE, YEAR 2009
Vendedor: 4LBiz Handelsgesellschaft UG
Año de construcción: usado
Precio: 195 €
Ubicación: Land-donaldson topspin precleaner airfilter, diameter tube 178mm   , height 258mm, , meant for caterpillar c18 engine; engine: caterpillar c18; accessories: donaldson topspin precleaner airfilter, diameter tube 178mm   , height 258mm, , meant for caterpillar c18 engine DONALDSON TOPSPIN PRECLEANER AIRFILTER, DIAMETER TUBE 178MM , HEIGHT 258MM, , MEANT FOR CATERPILLAR C18 ENGINE; ENGINE: CATERPILLAR C18; ACCESSORIES: DONALDSON TOPSPIN PRECLEANER AIRFILTER, DIAMETER TUBE 178MM , HEIGHT 258MM, , MEANT FOR CATERPILLAR C18 ENGINE
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-amada lc 2415 ?3 (2006)

overview
brand: amada
model: llc 2415 ?3
application type: laser cutting
machine type: laser cutting machines
availability: immediately
production year: 2006
location: finland
origin country: france
production hours: 31417

general data
measurements width: 5700 mm
measurements depth: 2500 mm
measurements height: 2275 mm
machine weight: 6700 kg

control unit
brand: fanuc
model: series 160i-l
cnc main language: english
cnc language customizable: yes

main drive
laser power: 4 kw
laser type: co2
laser brand: fanuc laser c4000

movement
x-axis movement: 2520 mm
y-axis movement: 1550 mm
z-axis movement: 300 mm

workpiece
workpiece drm: 1550 mm

max material thickness
steel: 12 mm
stainless steel: 8 mm
aluminium: 3 mm

media
main electronic connection: 400 v
power consumption: 65 kva
internal cooling: yes

additional equipment
1: cooling unit
2: dust collector AMADA LC 2415 ?3 (2006) OVERVIEW BRAND: AMADA MODEL: LLC 2415 ?3 APPLICATION TYPE: LASER CUTTING MACHINE TYPE: LASER CUTTING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2006 LOCATION: FINLAND ORIGIN COUNTRY: FRANCE PRODUCTION HOURS: 31417 GENERAL DATA MEASUREMENTS WIDTH: 5700 MM MEASUREMENTS DEPTH: 2500 MM MEASUREMENTS HEIGHT: 2275 MM MACHINE WEIGHT: 6700 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 160I-L CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE LASER POWER: 4 KW LASER TYPE: CO2 LASER BRAND: FANUC LASER C4000 MOVEMENT X-AXIS MOVEMENT: 2520 MM Y-AXIS MOVEMENT: 1550 MM Z-AXIS MOVEMENT: 300 MM WORKPIECE WORKPIECE DRM: 1550 MM MAX MATERIAL THICKNESS STEEL: 12 MM STAINLESS STEEL: 8 MM ALUMINIUM: 3 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 65 KVA INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: COOLING UNIT 2: DUST COLLECTOR "DONALDSON TORIT DCE" 3: AMADA SOFTWARE
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-air seperator classifier (1x), make majac donaldson, type acucut a-12, no 12-12019, new unknown, rotor diameter 305mm (12 inch), motor 1,1 kw, 220/380 volt, extra specifications dim. 1,2x0,9x1,3 m (lxwxh), weight 170 kgwind siftersdust separators > wind sifters AIR SEPERATOR CLASSIFIER (1X), MAKE MAJAC DONALDSON, TYPE ACUCUT A-12, NO 12-12019, NEW UNKNOWN, ROTOR DIAMETER 305MM (12 INCH), MOTOR 1,1 KW, 220/380 VOLT, EXTRA SPECIFICATIONS DIM. 1,2X0,9X1,3 M (LXWXH), WEIGHT 170 KGWIND SIFTERSDUST SEPARATORS > WIND SIFTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-amada lc 2415 ?3 (2005)

overview
brand: amada
model: lc 2415 ?3
application type: laser cutting
machine type: laser cutting machines
availability: immediately
production year: 2005
location: finland
origin country: france
production hours: 44410

general data
measurements width: 5700 mm
measurements depth: 2500 mm
measurements height: 2275 mm
machine weight: 6700 kg

control unit
brand: fanuc
model: series 160i-l
cnc main language: english
cnc language customizable: yes

main drive
laser power: 4 kw
laser type: co2
laser brand: fanuc laser c4000

movement
x-axis movement: 2520 mm
y-axis movement: 1550 mm
z-axis movement: 300 mm

workpiece
workpiece drm: 1550 mm

max material thickness
steel: 12 mm
stainless steel: 8 mm
aluminium: 3 mm

media
main electronic connection: 400 v
power consumption: 65 kva
chip conveyor: yes
internal cooling: yes

additional equipment
1: cooling unit
2: dust collector AMADA LC 2415 ?3 (2005) OVERVIEW BRAND: AMADA MODEL: LC 2415 ?3 APPLICATION TYPE: LASER CUTTING MACHINE TYPE: LASER CUTTING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2005 LOCATION: FINLAND ORIGIN COUNTRY: FRANCE PRODUCTION HOURS: 44410 GENERAL DATA MEASUREMENTS WIDTH: 5700 MM MEASUREMENTS DEPTH: 2500 MM MEASUREMENTS HEIGHT: 2275 MM MACHINE WEIGHT: 6700 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 160I-L CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE LASER POWER: 4 KW LASER TYPE: CO2 LASER BRAND: FANUC LASER C4000 MOVEMENT X-AXIS MOVEMENT: 2520 MM Y-AXIS MOVEMENT: 1550 MM Z-AXIS MOVEMENT: 300 MM WORKPIECE WORKPIECE DRM: 1550 MM MAX MATERIAL THICKNESS STEEL: 12 MM STAINLESS STEEL: 8 MM ALUMINIUM: 3 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 65 KVA CHIP CONVEYOR: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: COOLING UNIT 2: DUST COLLECTOR "DONALDSON TORIT DCE" 3: WORK PIECE CONVEYER 4: LOADER "AMADA L III 300" 5: UNLOADER "AMADA PR III A" 6: AMADA SOFTWARE
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-ribbon blender (1x), make dinnissen machinefabriek b.v. sevenum, type 1971, no 1976, material stainless steel (304), capacity 2000 ltr, trough sizes dia. 1100x2200mm, inlet 740x200mm + dia. 125mm + dia. 600mm, manhole /inspection hatch (3x), outlet dia. 210mm, with jacket (bottom of mixing trough is jacketed), working pressure unknown, motor 7,5 kw, 380 volt (ex), speed mixing shaft ± 26 rpm, extra specifications - with donaldson filter, type dce dalamatic dlm-v 7/7sribbon blendersmixers > ribbon blenders RIBBON BLENDER (1X), MAKE DINNISSEN MACHINEFABRIEK B.V. SEVENUM, TYPE 1971, NO 1976, MATERIAL STAINLESS STEEL (304), CAPACITY 2000 LTR, TROUGH SIZES DIA. 1100X2200MM, INLET 740X200MM + DIA. 125MM + DIA. 600MM, MANHOLE /INSPECTION HATCH (3X), OUTLET DIA. 210MM, WITH JACKET (BOTTOM OF MIXING TROUGH IS JACKETED), WORKING PRESSURE UNKNOWN, MOTOR 7,5 KW, 380 VOLT (EX), SPEED MIXING SHAFT ± 26 RPM, EXTRA SPECIFICATIONS - WITH DONALDSON FILTER, TYPE DCE DALAMATIC DLM-V 7/7SRIBBON BLENDERSMIXERS > RIBBON BLENDERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-hours of operation machine: approx. 39.800 h (as of 06-18)
hours of operation laser: approx. 20,000 hrs (as of 06-18)
working area x x y x z 6500 x 2540 x 170 mm

laser

laser type: dc semiconductor excitation
laser power cw: 4400 watts
laser power range: 150-4400 watt

machine

cnc control: bystronic cnc 96 +.
cooling unit: e. furrer wkl 430 s 1
dust removal system: donaldson torrit df pro of electrical connection total: 56 kw machine + extraction
space requirement approx.: 19,000 x 8,000 x 3.000 mm
total weight approx.: 32,500 kg cut material types & thicknesses

steel (en 10027-1 s 235jr + ar o. accord. raex-qualitã¤t) 25 mm
stainless steel (en 10027-2 1.4301 (x5crni18-10) 20 mm)
aluminumlegierungen (e.g. 3.3535 almg3) 12 mm

machine equipment

standard equipment:
â?¢ cutting machine with operator protection for occupational safety and health provisions in the cutting, loading, and unloading area
â?¢ automatic exchange table
â?¢ 2 cutting heads with 5 "+ 7.5" lens â?¢ bypos-w
â?¢ cross-jet â?¢ cut-control,.

optional extras:
â?¢ extraction system (included in delivery)

revision and state description:
â?¢ maintenance and service by the manufacturer only
â?¢ machine is in production
 HOURS OF OPERATION MACHINE: APPROX. 39.800 H (AS OF 06-18) HOURS OF OPERATION LASER: APPROX. 20,000 HRS (AS OF 06-18) WORKING AREA X X Y X Z 6500 X 2540 X 170 MM LASER LASER TYPE: DC SEMICONDUCTOR EXCITATION LASER POWER CW: 4400 WATTS LASER POWER RANGE: 150-4400 WATT MACHINE CNC CONTROL: BYSTRONIC CNC 96 +. COOLING UNIT: E. FURRER WKL 430 S 1 DUST REMOVAL SYSTEM: DONALDSON TORRIT DF PRO OF ELECTRICAL CONNECTION TOTAL: 56 KW MACHINE + EXTRACTION SPACE REQUIREMENT APPROX.: 19,000 X 8,000 X 3.000 MM TOTAL WEIGHT APPROX.: 32,500 KG CUT MATERIAL TYPES & THICKNESSES STEEL (EN 10027-1 S 235JR + AR O. ACCORD. RAEX-QUALITäT) 25 MM STAINLESS STEEL (EN 10027-2 1.4301 (X5CRNI18-10) 20 MM) ALUMINUMLEGIERUNGEN (E.G. 3.3535 ALMG3) 12 MM MACHINE EQUIPMENT STANDARD EQUIPMENT: Â?¢ CUTTING MACHINE WITH OPERATOR PROTECTION FOR OCCUPATIONAL SAFETY AND HEALTH PROVISIONS IN THE CUTTING, LOADING, AND UNLOADING AREA Â?¢ AUTOMATIC EXCHANGE TABLE Â?¢ 2 CUTTING HEADS WITH 5 "+ 7.5" LENS Â?¢ BYPOS-W Â?¢ CROSS-JET Â?¢ CUT-CONTROL,. OPTIONAL EXTRAS: Â?¢ EXTRACTION SYSTEM (INCLUDED IN DELIVERY) REVISION AND STATE DESCRIPTION: Â?¢ MAINTENANCE AND SERVICE BY THE MANUFACTURER ONLY Â?¢ MACHINE IS IN PRODUCTION
Vendedor: MESA GmbH
Año de construcción: usado
Precio: 135 €
Ubicación: Land-donaldson topspin precleaner air filter, overall height 290mm, diameter tube 105mm; accessories: donaldson topspin precleaner air filter, overall height 290mm, diameter tube 105mm DONALDSON TOPSPIN PRECLEANER AIR FILTER, OVERALL HEIGHT 290MM, DIAMETER TUBE 105MM; ACCESSORIES: DONALDSON TOPSPIN PRECLEANER AIR FILTER, OVERALL HEIGHT 290MM, DIAMETER TUBE 105MM
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-hours of operation machine: approx. 30.500 h (as of 05-18)
hours of operation laser: approx. 15.800 h (as of 05-18)
working area x x y x z 12000 x 2540 x 170 mm

laser

laser type: rf semiconductor excitation
laser power cw: 6000 watts
laser power range: 150-6000 watt

machine

cnc control: bystronic mmc byvision
cooling unit: e. furrer wkl 560 s 1
dust removal system: donaldson torrit df pro 6 which
electrical connection total: 78 kw machine + 3 kw suction
space requirement approx.: 35.200 x 7,500 x 2,350 mm
total weight approx.: 42,500 kg cut material types & thicknesses

steel (en 10027-1 s 235jr + ar o. accord. raex-qualitã¤t) 25 mm
stainless steel (en 10027-2 1.4301 (x5crni18-10) 25 mm)
aluminumlegierungen (e.g. 3.3535 almg3) 15 mm

machine equipment

standard equipment:
â?¢ cutting machine with operator protection for occupational safety and health provisions in the cutting, loading, and unloading area
â?¢ automatic exchange table
â?¢ 2 cutting heads with 5 "+ 7.5" lens â?¢ bypos-w
â?¢ cross-jet â?¢ cut-control,.

optional extras:
â?¢ extraction system (included in delivery)

revision and state description:
â?¢ maintenance and service by the manufacturer only
â?¢ machine is in production
 HOURS OF OPERATION MACHINE: APPROX. 30.500 H (AS OF 05-18) HOURS OF OPERATION LASER: APPROX. 15.800 H (AS OF 05-18) WORKING AREA X X Y X Z 12000 X 2540 X 170 MM LASER LASER TYPE: RF SEMICONDUCTOR EXCITATION LASER POWER CW: 6000 WATTS LASER POWER RANGE: 150-6000 WATT MACHINE CNC CONTROL: BYSTRONIC MMC BYVISION COOLING UNIT: E. FURRER WKL 560 S 1 DUST REMOVAL SYSTEM: DONALDSON TORRIT DF PRO 6 WHICH ELECTRICAL CONNECTION TOTAL: 78 KW MACHINE + 3 KW SUCTION SPACE REQUIREMENT APPROX.: 35.200 X 7,500 X 2,350 MM TOTAL WEIGHT APPROX.: 42,500 KG CUT MATERIAL TYPES & THICKNESSES STEEL (EN 10027-1 S 235JR + AR O. ACCORD. RAEX-QUALITäT) 25 MM STAINLESS STEEL (EN 10027-2 1.4301 (X5CRNI18-10) 25 MM) ALUMINUMLEGIERUNGEN (E.G. 3.3535 ALMG3) 15 MM MACHINE EQUIPMENT STANDARD EQUIPMENT: Â?¢ CUTTING MACHINE WITH OPERATOR PROTECTION FOR OCCUPATIONAL SAFETY AND HEALTH PROVISIONS IN THE CUTTING, LOADING, AND UNLOADING AREA Â?¢ AUTOMATIC EXCHANGE TABLE Â?¢ 2 CUTTING HEADS WITH 5 "+ 7.5" LENS Â?¢ BYPOS-W Â?¢ CROSS-JET Â?¢ CUT-CONTROL,. OPTIONAL EXTRAS: Â?¢ EXTRACTION SYSTEM (INCLUDED IN DELIVERY) REVISION AND STATE DESCRIPTION: Â?¢ MAINTENANCE AND SERVICE BY THE MANUFACTURER ONLY Â?¢ MACHINE IS IN PRODUCTION
Vendedor: MESA GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 22.500 €
Ubicación: Land-weight approx.: 15500 kg<br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>description: laser cutting machine was rebuilt and revised in 2013, operating hours according to report from 16 june 2017 approx. 15025h, cutting hours 6291h, travel paths/ cutting ranges x= 1562mm, y= 772mm, z= 100mm, max. plate size 752x1542mm, load capacities infeed table= 300 kg, cutting table= 80 kg, position deviation pa= +/-0,1mm, position scattering range = +/- 0,05mm, position speed (x+y) = 100m/min, max. laser capacity 2200w, material thickness structural steel 1.0-8.0mm, stainless steel 1.0-6.0mm, aluminium 1.0-4.0mm, 2 laser cutter head mount with 5 (mounted) and 7.5, laser type bylaser 2200m, laser medium co2, control range 150-2200w, pulse frequency 1-2500 hz, shaft length= 10600nm, beam diameter 20mm, including 1 water filter system manufacturer donaldson type ultrapac 2000, yom 2013, flow rate= 50m3/h, 2 gas cylinders connection points with manometers for o2 and n2 gas cylinders, including 1 coolant unit, manufacturer ernst h. furrer, type wkl 300-f, coolant r407c, cooling capacity 35kw- 30000 kcal/h, air outlet (upwards) 11600m3/h, with supply and exhaust air ducts, base area of the whole machine approx. 6x6m=36m2, connected load max. 37kva, operation 22kva WEIGHT APPROX.: 15500 KG
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
DESCRIPTION: LASER CUTTING MACHINE WAS REBUILT AND REVISED IN 2013, OPERATING HOURS ACCORDING TO REPORT FROM 16 JUNE 2017 APPROX. 15025H, CUTTING HOURS 6291H, TRAVEL PATHS/ CUTTING RANGES X= 1562MM, Y= 772MM, Z= 100MM, MAX. PLATE SIZE 752X1542MM, LOAD CAPACITIES INFEED TABLE= 300 KG, CUTTING TABLE= 80 KG, POSITION DEVIATION PA= +/-0,1MM, POSITION SCATTERING RANGE = +/- 0,05MM, POSITION SPEED (X+Y) = 100M/MIN, MAX. LASER CAPACITY 2200W, MATERIAL THICKNESS STRUCTURAL STEEL 1.0-8.0MM, STAINLESS STEEL 1.0-6.0MM, ALUMINIUM 1.0-4.0MM, 2 LASER CUTTER HEAD MOUNT WITH 5 (MOUNTED) AND 7.5, LASER TYPE BYLASER 2200M, LASER MEDIUM CO2, CONTROL RANGE 150-2200W, PULSE FREQUENCY 1-2500 HZ, SHAFT LENGTH= 10600NM, BEAM DIAMETER 20MM, INCLUDING 1 WATER FILTER SYSTEM MANUFACTURER DONALDSON TYPE ULTRAPAC 2000, YOM 2013, FLOW RATE= 50M3/H, 2 GAS CYLINDERS CONNECTION POINTS WITH MANOMETERS FOR O2 AND N2 GAS CYLINDERS, INCLUDING 1 COOLANT UNIT, MANUFACTURER ERNST H. FURRER, TYPE WKL 300-F, COOLANT R407C, COOLING CAPACITY 35KW- 30000 KCAL/H, AIR OUTLET (UPWARDS) 11600M3/H, WITH SUPPLY AND EXHAUST AIR DUCTS, BASE AREA OF THE WHOLE MACHINE APPROX. 6X6M=36M2, CONNECTED LOAD MAX. 37KVA, OPERATION 22KVA
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-format: 32 x 47cm
67 mio impression, (approx 17 mio four colour print)
high definition imaging
image quality 812 x 1,624 dpi
duplex
inline densitometer
fullcolor
operating system - windows xp
workstation - hp xw 4300. pentium iv
press software hp indigo 7.4.4
cooling donaldson chiller
including bid wasch   FORMAT: 32 X 47CM 67 MIO IMPRESSION, (APPROX 17 MIO FOUR COLOUR PRINT) HIGH DEFINITION IMAGING IMAGE QUALITY 812 X 1,624 DPI DUPLEX INLINE DENSITOMETER FULLCOLOR OPERATING SYSTEM - WINDOWS XP WORKSTATION - HP XW 4300. PENTIUM IV PRESS SOFTWARE HP INDIGO 7.4.4 COOLING DONALDSON CHILLER INCLUDING BID WASCH
Vendedor: TMP Meurer Industry & Consult GmbH
Año de construcción: usado
Ubicación: Land-type 4dfp12-r12 filterelements - 12, valvesvolume: 2,23 m3max workpressure: -+ 5kpaheight: 2290 mmweight: 950 kg TYPE 4DFP12-R12 FILTERELEMENTS - 12, VALVESVOLUME: 2,23 M3MAX WORKPRESSURE: -+ 5KPAHEIGHT: 2290 MMWEIGHT: 950 KG
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-volume flow: 850m³/h, power: 1.6kw.  VOLUME FLOW: 850M³/H, POWER: 1.6KW.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-type 4dfp12-r12 filterelements - 12, valvesvolume: 2,23 m3max workpressure: -+ 5kpaheight: 2290 mmweight: 950 kg TYPE 4DFP12-R12 FILTERELEMENTS - 12, VALVESVOLUME: 2,23 M3MAX WORKPRESSURE: -+ 5KPAHEIGHT: 2290 MMWEIGHT: 950 KG
Vendedor: APT International
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-cortina ds 3100, working range: 8,000 x 2,000 mm, built in dec. 2004<br/>  <br/>  cnc controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 v 50 hz, tn-s network (§ / pe/n)<br/>  track width: 3100 mm<br/>  working width: 2000 mm<br/>  dead length: 1500 mm<br/>  total width: 3525 mm<br/>  operating side: left<br/>  power supply: right<br/>  fuel: propane<br/>  including:<br/>  omnicom explorer c drive 15 m / min dc<br/>  carrier for double-sided longitudinal drive on schienenfüßen<br/>  machine cutting torch alfa (with internal ignition)<br/>  omniflow autogen supply (gas volume control up to 6 burner)<br/>  omniflow control<br/>  burner suspension omnilift 200<br/>  sensomat alfa<br/>  sensomat arc/sr<br/>  plasma setcontrol, tactile initial height determination<br/>  interlock for maximum of 2 plants<br/>  ht 4400 hyspeed fine beam plasma cutting system<br/>  cutting up to 50mm power supply through energy chain (oxy-fuel / plasma)<br/>  cut recording for network from<br/>  <br/>  ecotab vacuum table by wimo.<br/>  <br/>  filter fan from donaldson.<br/>  <br/>  now available<br/>  <br/>  commissioning on request CORTINA DS 3100, WORKING RANGE: 8,000 X 2,000 MM, BUILT IN DEC. 2004

CNC CONTROLLED CUTTING MACHINE WITH STURDY BRIDGE SUSPENSION, INTERLOCKING LONGITUDINAL DRIVES AND PRECISE MACHINED LEADERSHIP PROFILES, SUPPLY VOLTAGE: 400 V 50 HZ, TN-S NETWORK (§ / PE/N)
TRACK WIDTH: 3100 MM
WORKING WIDTH: 2000 MM
DEAD LENGTH: 1500 MM
TOTAL WIDTH: 3525 MM
OPERATING SIDE: LEFT
POWER SUPPLY: RIGHT
FUEL: PROPANE
INCLUDING:
OMNICOM EXPLORER C DRIVE 15 M / MIN DC
CARRIER FOR DOUBLE-SIDED LONGITUDINAL DRIVE ON SCHIENENFüßEN
MACHINE CUTTING TORCH ALFA (WITH INTERNAL IGNITION)
OMNIFLOW AUTOGEN SUPPLY (GAS VOLUME CONTROL UP TO 6 BURNER)
OMNIFLOW CONTROL
BURNER SUSPENSION OMNILIFT 200
SENSOMAT ALFA
SENSOMAT ARC/SR
PLASMA SETCONTROL, TACTILE INITIAL HEIGHT DETERMINATION
INTERLOCK FOR MAXIMUM OF 2 PLANTS
HT 4400 HYSPEED FINE BEAM PLASMA CUTTING SYSTEM
CUTTING UP TO 50MM POWER SUPPLY THROUGH ENERGY CHAIN (OXY-FUEL / PLASMA)
CUT RECORDING FOR NETWORK FROM

ECOTAB VACUUM TABLE BY WIMO.

FILTER FAN FROM DONALDSON.

NOW AVAILABLE

COMMISSIONING ON REQUEST
Vendedor: CNC Servicetechnik Sperling
Año de construcción: usado
Ubicación: Land-type 4dfp12-r12 filterelements - 12, valvesvolume: 2,23 m3max workpressure: -+ 5kpaheight: 2290 mmweight: 950 kg TYPE 4DFP12-R12 FILTERELEMENTS - 12, VALVESVOLUME: 2,23 M3MAX WORKPRESSURE: -+ 5KPAHEIGHT: 2290 MMWEIGHT: 950 KG
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-volume flow: 19.58m³/min, pressure drop: 0.29bar, cooling output: 2600m³ air/h, length: 800mm, width: 900mm, height: 1230mm, weight: 180kg.  VOLUME FLOW: 19.58M³/MIN, PRESSURE DROP: 0.29BAR, COOLING OUTPUT: 2600M³ AIR/H, LENGTH: 800MM, WIDTH: 900MM, HEIGHT: 1230MM, WEIGHT: 180KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-type hs 6001.15p+ch500p- high definition source- 4th axis included for tubes- donaldson torit dce filtersystem included TYPE HS 6001.15P+CH500P- HIGH DEFINITION SOURCE- 4TH AXIS INCLUDED FOR TUBES- DONALDSON TORIT DCE FILTERSYSTEM INCLUDED
Vendedor: APT International
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-knife cortina 2600.<br/>  year of construction: 1994<br/>  control ks 20a plasma: hypertherm max 100 (cut up to 30mm)<br/>  the vacuum table: 1500 x 3000 mm. <br/>  with only a torch cart instead of 2 or 3, you have a working width up to 2000 mm.<br/>  the box program on the pc is the omniwin cad.<br/>  exhaust system: donaldson 5.5 kw<br/>  to visit, now available under current<br/>  commissioning on request KNIFE CORTINA 2600.
YEAR OF CONSTRUCTION: 1994
CONTROL KS 20A PLASMA: HYPERTHERM MAX 100 (CUT UP TO 30MM)
THE VACUUM TABLE: 1500 X 3000 MM.
WITH ONLY A TORCH CART INSTEAD OF 2 OR 3, YOU HAVE A WORKING WIDTH UP TO 2000 MM.
THE BOX PROGRAM ON THE PC IS THE OMNIWIN CAD.
EXHAUST SYSTEM: DONALDSON 5.5 KW
TO VISIT, NOW AVAILABLE UNDER CURRENT
COMMISSIONING ON REQUEST
Vendedor: CNC Servicetechnik Sperling
Año de construcción: usado
Ubicación: Land-track width: 3100mm, working wdith: 2000mm, dead length: 1500mm, total width: 3525mm, control side: left, power supply: right, gas: propane, with plasma cutter messer griesheim hypertherm ht4400, ventilation system donaldson and accessories, software not included. TRACK WIDTH: 3100MM, WORKING WDITH: 2000MM, DEAD LENGTH: 1500MM, TOTAL WIDTH: 3525MM, CONTROL SIDE: LEFT, POWER SUPPLY: RIGHT, GAS: PROPANE, WITH PLASMA CUTTER MESSER GRIESHEIM HYPERTHERM HT4400, VENTILATION SYSTEM DONALDSON AND ACCESSORIES, SOFTWARE NOT INCLUDED.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-ref.-no. 00491
designation of the plant xxl plasma cutting system
manufacturers esab
model esab telerex txb 8500
built in 2005
cnc nce 620
drive yaskawa ac sam
career (type s49) 30 meters
track 8500 mm
approx. 700 mm high sidewall
the cutting grate is approx. 180 mm above the top career
aggregates 2 infinite plasma vba on a motor car, y1 and y2
plasma 2 kjellberg define focus 800 with burner pb-s77
mark 2 arc marker l-tec
aspirator donaldson torrit (12 x) with ex protection
fan 15.000 mâ³/h, 3700 21kw
 REF.-NO. 00491 DESIGNATION OF THE PLANT XXL PLASMA CUTTING SYSTEM MANUFACTURERS ESAB MODEL ESAB TELEREX TXB 8500 BUILT IN 2005 CNC NCE 620 DRIVE YASKAWA AC SAM CAREER (TYPE S49) 30 METERS TRACK 8500 MM APPROX. 700 MM HIGH SIDEWALL THE CUTTING GRATE IS APPROX. 180 MM ABOVE THE TOP CAREER AGGREGATES 2 INFINITE PLASMA VBA ON A MOTOR CAR, Y1 AND Y2 PLASMA 2 KJELLBERG DEFINE FOCUS 800 WITH BURNER PB-S77 MARK 2 ARC MARKER L-TEC ASPIRATOR DONALDSON TORRIT (12 X) WITH EX PROTECTION FAN 15.000 M&ACIRC;&SUP3;/H, 3700 21KW
Vendedor: tuerer machinery brokers & consulting
Año de construcción: usado
Ubicación: Land-track length: 30000mm, track width: 8500mm, track height: 700mm, control: cnc nce 620, cutter: 2x kjellberg finefocus 800 with pb s77, extraction: donaldson torrit, extraction output: 15000m³/h, working pressure: 3700pa.  TRACK LENGTH: 30000MM, TRACK WIDTH: 8500MM, TRACK HEIGHT: 700MM, CONTROL: CNC NCE 620, CUTTER: 2X KJELLBERG FINEFOCUS 800 WITH PB S77, EXTRACTION: DONALDSON TORRIT, EXTRACTION OUTPUT: 15000M³/H, WORKING PRESSURE: 3700PA.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-microstep - eurocut-p 3001.15<br/>  work area: 1500 x 3000 mm<br/>  plasma source of kjellberg hifocus 160i with automatic gaskosole<br/>  cut quality cutting up to 25 mm<br/>  <br/>  extraction donaldson md2-plc + dfpro 4 which<br/>  with additional ex-protection.<br/>   <br/>   refurbished in 2016<br/>  <br/>  all servicing or repairs were solely by the manufacturer<br/>  (company microstep and donaldson).<br/>  the prescribed maintenance intervals were always met.<br/>  all maintenance and repairs are extensively documented.<br/>  <br/>  commissioning on request MICROSTEP - EUROCUT-P 3001.15
WORK AREA: 1500 X 3000 MM
PLASMA SOURCE OF KJELLBERG HIFOCUS 160I WITH AUTOMATIC GASKOSOLE
CUT QUALITY CUTTING UP TO 25 MM

EXTRACTION DONALDSON MD2-PLC + DFPRO 4 WHICH
WITH ADDITIONAL EX-PROTECTION.

REFURBISHED IN 2016

ALL SERVICING OR REPAIRS WERE SOLELY BY THE MANUFACTURER
(COMPANY MICROSTEP AND DONALDSON).
THE PRESCRIBED MAINTENANCE INTERVALS WERE ALWAYS MET.
ALL MAINTENANCE AND REPAIRS ARE EXTENSIVELY DOCUMENTED.

COMMISSIONING ON REQUEST
Vendedor: CNC Servicetechnik Sperling
Año de construcción: usado
Precio: 59.000 €
Ubicación: Land-cnc plasma cutting system blades metalmaster<br/>  work area: 8000 x 2500 mm<br/>  <br/>  plasma: hypertherm 260<br/>  cutting up to 32mm<br/>  very good condition with donaldson filter system now available<br/>  including cad/cam software commissioning on request CNC PLASMA CUTTING SYSTEM BLADES METALMASTER
WORK AREA: 8000 X 2500 MM

PLASMA: HYPERTHERM 260
CUTTING UP TO 32MM
VERY GOOD CONDITION WITH DONALDSON FILTER SYSTEM NOW AVAILABLE
INCLUDING CAD/CAM SOFTWARE COMMISSIONING ON REQUEST
Vendedor: CNC Servicetechnik Sperling
Año de construcción: usado
Ubicación: Land-ultra fine classifying line for end finenesses up to 3 micron, consisting of: feeding unit, acucut mikro air classifier c-24, dust filter bühler pgfg 60/18 (39 m² filtering surface, shock pressure proof, without blower), several tubes and switchgear cabinet.

prior use: toner production (capacity: 200 - 600 kg/h). line revised in 1993, regularly maintained. ULTRA FINE CLASSIFYING LINE FOR END FINENESSES UP TO 3 MICRON, CONSISTING OF: FEEDING UNIT, ACUCUT MIKRO AIR CLASSIFIER C-24, DUST FILTER BüHLER PGFG 60/18 (39 M² FILTERING SURFACE, SHOCK PRESSURE PROOF, WITHOUT BLOWER), SEVERAL TUBES AND SWITCHGEAR CABINET. PRIOR USE: TONER PRODUCTION (CAPACITY: 200 - 600 KG/H). LINE REVISED IN 1993, REGULARLY MAINTAINED.
Vendedor: Rau GmbH
Año de construcción: usado
Ubicación: Land-x-axis	510 mm
y-axis	360 mm
z-axis	460 mm
	
working table	
table size	760x380 mm
number of t-slots	3
max. table load	400 kgs.
	
milling spindle	
spindle speed	300-30000 rpm
spindle taper	bt 30
	
feed rates	
cutting federate x,y,z	1-10000 mm/min
rapid traverse x,y,z	30/30/24 m/min
	
tool changer	
number of tools	30
	
cnc control	matsuura / yasnac m80
	
coolant equipment	coolant equipment with capacity 280 lts.
	
optional equipment	
fire extinguisher siemens
	oil dust remove unit donaldson
	colling spindle by air
	air dryer
	renishaw measuring probe m 112
	workpiece clamping unit erowa, 4-fold
	
	
accessories	
tool holder bt 30, totally 38 pcs.
	documentation machine in german and english language

condition	
machine in good condition and ready for operation
   X-AXIS 510 MM Y-AXIS 360 MM Z-AXIS 460 MM WORKING TABLE TABLE SIZE 760X380 MM NUMBER OF T-SLOTS 3 MAX. TABLE LOAD 400 KGS. MILLING SPINDLE SPINDLE SPEED 300-30000 RPM SPINDLE TAPER BT 30 FEED RATES CUTTING FEDERATE X,Y,Z 1-10000 MM/MIN RAPID TRAVERSE X,Y,Z 30/30/24 M/MIN TOOL CHANGER NUMBER OF TOOLS 30 CNC CONTROL MATSUURA / YASNAC M80 COOLANT EQUIPMENT COOLANT EQUIPMENT WITH CAPACITY 280 LTS. OPTIONAL EQUIPMENT FIRE EXTINGUISHER SIEMENS OIL DUST REMOVE UNIT DONALDSON COLLING SPINDLE BY AIR AIR DRYER RENISHAW MEASURING PROBE M 112 WORKPIECE CLAMPING UNIT EROWA, 4-FOLD ACCESSORIES TOOL HOLDER BT 30, TOTALLY 38 PCS. DOCUMENTATION MACHINE IN GERMAN AND ENGLISH LANGUAGE CONDITION MACHINE IN GOOD CONDITION AND READY FOR OPERATION
Vendedor: Management & Services Greter
Año de construcción: usado
Ubicación: Land-hp indigo press 5000
first installation: 11/2006
impressions: osteo. 67.1 million
high definition imaging: yes
image quality: 812 x 1.624 dpi
colors: 6c, all unlocked
duplex: yes
collation: yes
paper size: 320 x 475 mm
print format: 308 x 450 mm
inline densitometers: yes
personalization: fullcolor
operating system: windows xp
workstation: hp xw 4300, pentium iv.
press software: hp indigo 7.4.4
cooling: donaldson chiller
service: up-to-date in full service
general overhaul at the turn of the year
price: &euro; 28.500,-ex-site germany
location germany
 HP INDIGO PRESS 5000 FIRST INSTALLATION: 11/2006 IMPRESSIONS: OSTEO. 67.1 MILLION HIGH DEFINITION IMAGING: YES IMAGE QUALITY: 812 X 1.624 DPI COLORS: 6C, ALL UNLOCKED DUPLEX: YES COLLATION: YES PAPER SIZE: 320 X 475 MM PRINT FORMAT: 308 X 450 MM INLINE DENSITOMETERS: YES PERSONALIZATION: FULLCOLOR OPERATING SYSTEM: WINDOWS XP WORKSTATION: HP XW 4300, PENTIUM IV. PRESS SOFTWARE: HP INDIGO 7.4.4 COOLING: DONALDSON CHILLER SERVICE: UP-TO-DATE IN FULL SERVICE GENERAL OVERHAUL AT THE TURN OF THE YEAR PRICE: &EURO; 28.500,-EX-SITE GERMANY LOCATION GERMANY
Vendedor: USED Machines
Año de construcción: usado
Ubicación: Land-laser cutting machine
manufacturer: mazak
type: super turbo x 48
year of construction: 1995
cnc control: l32

work area: 1,250 x 2,500 mm
capacity: 2.000 watt
lasers: co2 laser yb l200b 7m3e
filter system: donaldson torit
hours of operation: 37900
 LASER CUTTING MACHINE MANUFACTURER: MAZAK TYPE: SUPER TURBO X 48 YEAR OF CONSTRUCTION: 1995 CNC CONTROL: L32 WORK AREA: 1,250 X 2,500 MM CAPACITY: 2.000 WATT LASERS: CO2 LASER YB L200B 7M3E FILTER SYSTEM: DONALDSON TORIT HOURS OF OPERATION: 37900
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-imprs 8 million cooling of donaldson ultrafilter (enough two machine)
 rip-tower with 2 rip it and 2 ipc's (original hp dfe, install 2014 new pc so that newest software can be installed  IMPRS 8 MILLION COOLING OF DONALDSON ULTRAFILTER (ENOUGH TWO MACHINE) RIP-TOWER WITH 2 RIP IT AND 2 IPC'S (ORIGINAL HP DFE, INSTALL 2014 NEW PC SO THAT NEWEST SOFTWARE CAN BE INSTALLED
Vendedor: BALANCEGRAPH GMBH
Año de construcción: usado
Ubicación: Land- dust extraction filter type: dfpro 12
year 2004 
weight 1050kg
with fan 11kw  DUST EXTRACTION FILTER TYPE: DFPRO 12 YEAR 2004 WEIGHT 1050KG WITH FAN 11KW
Vendedor: Kornudstyr
Año de construcción: usado
Ubicación: Land-donaldson filter, type: p-eg 0192

please contact me for more photos and information.  DONALDSON FILTER, TYPE: P-EG 0192 PLEASE CONTACT ME FOR MORE PHOTOS AND INFORMATION.
Vendedor: Intermotor LTD
Año de construcción: usado
Ubicación: Land-(1) refrigerant dryer: donaldson ultrafilter ofp1650, refrigerant: r134a, refrigerant pressure: 16-20bar, temp.: -10-20°c, refrigerant vessel: 17.13l, compressed air: max.presure: 16bar, temp.: 2-70°c, compressed air vessel: 35.8l. (2) adsorption dryer: operating pressure: 4-10bar, operating temp.: 4-50?°, ambient temp.: 4-40°c, prefilter element: pe 30/30, m 30/30, s 30/30, afterfilter element: pe 03/05, pe 30/30.   (1) REFRIGERANT DRYER: DONALDSON ULTRAFILTER OFP1650, REFRIGERANT: R134A, REFRIGERANT PRESSURE: 16-20BAR, TEMP.: -10-20°C, REFRIGERANT VESSEL: 17.13L, COMPRESSED AIR: MAX.PRESURE: 16BAR, TEMP.: 2-70°C, COMPRESSED AIR VESSEL: 35.8L. (2) ADSORPTION DRYER: OPERATING PRESSURE: 4-10BAR, OPERATING TEMP.: 4-50?°, AMBIENT TEMP.: 4-40°C, PREFILTER ELEMENT: PE 30/30, M 30/30, S 30/30, AFTERFILTER ELEMENT: PE 03/05, PE 30/30.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-cartridges filter manufacturer: donaldson torit
 manufacturer: original donaldson torit
 filter material: extremist web
 original type: 262-5026 (open available: 20 pieces of price: each 90.-?
 262-5002 (lids) available: 3 pieces of price: each 90.-?
 262-5015 (open available: 5 pieces of price: each 70.-?
 suitable for ray arrangements ray cabin lackieranlage plasma absaugung etc. CARTRIDGES FILTER MANUFACTURER: DONALDSON TORIT MANUFACTURER: ORIGINAL DONALDSON TORIT FILTER MATERIAL: EXTREMIST WEB ORIGINAL TYPE: 262-5026 (OPEN AVAILABLE: 20 PIECES OF PRICE: EACH 90.-? 262-5002 (LIDS) AVAILABLE: 3 PIECES OF PRICE: EACH 90.-? 262-5015 (OPEN AVAILABLE: 5 PIECES OF PRICE: EACH 70.-? SUITABLE FOR RAY ARRANGEMENTS RAY CABIN LACKIERANLAGE PLASMA ABSAUGUNG ETC.
Vendedor: DECK S.A.R.L
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DONALDSON types: