122 ofertas

Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-
machine type machining center - horizontal make doosan type hp 5500 year 2008 control type cnc storage france origin korrea delivery immediately cargo basis exw (incoterms 2000) free t slow technical details

x trail 800 mm y path 700 mm z-way 750 mm control fanuc 18 i mb number of pallets 2 pallet size: 500 x 500 mm maximum werkstã¼ckdurchm. the pallet 900 mm workpiece - height 1000 mm max. work piece weight 1000 kg b-axis (table) 1 â° spindle speed 6000 1/min spindle motor 22/26 kw torque of the 420 spindle tool magazine: chain magazine 60 bt 50 piece max werkzeugdurch. free neighboring box. 300 mm maximum tool length 450 mm of maximum tool weight 30 kg rapid traverse x/y/z 50,000 mm/min total power requirement 77.6 kva machine weight approx. 17 t space requirement approx. 5.64 x 3.21 x 3.27 m accessories chip conveyor yes spindle coolers additional information

horizontal machining center with 2 x 500 mm pallets, equipped with b-axis with 1 â° indexing, ikz - hochdruchkã¼hlung through the work spindle 50 bar, 60-fach tool magazine bt 50
 cnc fanuc 18 i mb
 chip conveyor MACHINE TYPE MACHINING CENTER - HORIZONTAL MAKE DOOSAN TYPE HP 5500 YEAR 2008 CONTROL TYPE CNC STORAGE FRANCE ORIGIN KORREA DELIVERY IMMEDIATELY CARGO BASIS EXW (INCOTERMS 2000) FREE T SLOW TECHNICAL DETAILS X TRAIL 800 MM Y PATH 700 MM Z-WAY 750 MM CONTROL FANUC 18 I MB NUMBER OF PALLETS 2 PALLET SIZE: 500 X 500 MM MAXIMUM WERKSTüCKDURCHM. THE PALLET 900 MM WORKPIECE - HEIGHT 1000 MM MAX. WORK PIECE WEIGHT 1000 KG B-AXIS (TABLE) 1 ° SPINDLE SPEED 6000 1/MIN SPINDLE MOTOR 22/26 KW TORQUE OF THE 420 SPINDLE TOOL MAGAZINE: CHAIN MAGAZINE 60 BT 50 PIECE MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 300 MM MAXIMUM TOOL LENGTH 450 MM OF MAXIMUM TOOL WEIGHT 30 KG RAPID TRAVERSE X/Y/Z 50,000 MM/MIN TOTAL POWER REQUIREMENT 77.6 KVA MACHINE WEIGHT APPROX. 17 T SPACE REQUIREMENT APPROX. 5.64 X 3.21 X 3.27 M ACCESSORIES CHIP CONVEYOR YES SPINDLE COOLERS ADDITIONAL INFORMATION HORIZONTAL MACHINING CENTER WITH 2 X 500 MM PALLETS, EQUIPPED WITH B-AXIS WITH 1 ° INDEXING, IKZ - HOCHDRUCHKüHLUNG THROUGH THE WORK SPINDLE 50 BAR, 60-FACH TOOL MAGAZINE BT 50 CNC FANUC 18 I MB CHIP CONVEYOR
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 19.500 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-? skills and tours
or swing over bed mm 550.
or swing over slide 390 mm.
or maximum turning diameter 350 mm
or maximum working length 550 mm
or crossed axis x 242 mm
or crossed axis z 580 mm
or advance fast axis x 20 m/min
or advance fast axis z 25 m/min
? head or head 4000 rpm speed
or a2 #6 hub nose
or rod 66
or power of the main head 15/18 kw

? counterpoint
or cone mt #4
or the counterpoint 75 mm diameter
or travel the 80 mm ? counterpoint dimensions 3000x1.670x1.740 mm
? weight 4,150 kg
year of manufacture 2005 ?
? equipped with tools, chips extractor toolmaster, cnc fanuc series i
 ? SKILLS AND TOURS OR SWING OVER BED MM 550. OR SWING OVER SLIDE 390 MM. OR MAXIMUM TURNING DIAMETER 350 MM OR MAXIMUM WORKING LENGTH 550 MM OR CROSSED AXIS X 242 MM OR CROSSED AXIS Z 580 MM OR ADVANCE FAST AXIS X 20 M/MIN OR ADVANCE FAST AXIS Z 25 M/MIN ? HEAD OR HEAD 4000 RPM SPEED OR A2 #6 HUB NOSE OR ROD 66 OR POWER OF THE MAIN HEAD 15/18 KW ? COUNTERPOINT OR CONE MT #4 OR THE COUNTERPOINT 75 MM DIAMETER OR TRAVEL THE 80 MM ? COUNTERPOINT DIMENSIONS 3000X1.670X1.740 MM ? WEIGHT 4,150 KG YEAR OF MANUFACTURE 2005 ? ? EQUIPPED WITH TOOLS, CHIPS EXTRACTOR TOOLMASTER, CNC FANUC SERIES I
Vendedor: Corzosa
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-; gross weight [kg]: 1500; accessories: stahldach ; GROSS WEIGHT [KG]: 1500; ACCESSORIES: STAHLDACH
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-swing over bed: 330 mm maximum turning length: 678 mm rod diameter: 65 mm maximum spindle speed: 5000 rpm/min tool head - number of positions: 12 powered tools: yes c-axis: yes
the machine is in good technical condition, by prior agreement the possibility of testing. chip conveyor, probe, 12000 hours. about 4 machines are delivered with the machine. SWING OVER BED: 330 MM MAXIMUM TURNING LENGTH: 678 MM ROD DIAMETER: 65 MM MAXIMUM SPINDLE SPEED: 5000 RPM/MIN TOOL HEAD - NUMBER OF POSITIONS: 12 POWERED TOOLS: YES C-AXIS: YES THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. CHIP CONVEYOR, PROBE, 12000 HOURS. ABOUT 4 MACHINES ARE DELIVERED WITH THE MACHINE.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 4335; engine: doosan p158le-1; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 4335; ENGINE: DOOSAN P158LE-1; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Precio: 81.000 €
Ubicación: Land-
type of machine cnc turning and milling center make doosan daewoo type puma 1500 y year 2010 control type cnc storage france origin korea delivery after agreement based on cargo from the site plus removing technical details

rotary diameter 500 mm turning length 700 mm control fanuc 18 itb travel - x 250 mm stroke - y 100 +/-50 mm travel - z 700 mm rapid traverse - longitudinal/plan 24 m/min rapid traverse y - direction 16 m / min c-axis 20 min ⹠spindle hole diameter 65 mm spindle motor 15 kw fr㤠sspindelmotor 5.5 kw spindle speed: 5000 min ⹠number tool places in lower turret 12 of which are powered stations 12 total power consumption approx. 40 kva machine weight approx. 5,500 kg space requirement approx. 3.5 x 1.8 x 2 m
additional information

-center puma 2000 ly
 -tailstock
-rotary length 760 mm
 -tool turret 12 specialist
 -feed 170 mm spindle
 chip tools feed
-high pressure coolant supply 7 bar
 -various control options.
 driven tool holder
 measuring arm
 bar loaders iemca advantage 66 mm leng 1500 mm TYPE OF MACHINE CNC TURNING AND MILLING CENTER MAKE DOOSAN DAEWOO TYPE PUMA 1500 Y YEAR 2010 CONTROL TYPE CNC STORAGE FRANCE ORIGIN KOREA DELIVERY AFTER AGREEMENT BASED ON CARGO FROM THE SITE PLUS REMOVING TECHNICAL DETAILS ROTARY DIAMETER 500 MM TURNING LENGTH 700 MM CONTROL FANUC 18 ITB TRAVEL - X 250 MM STROKE - Y 100 +/-50 MM TRAVEL - Z 700 MM RAPID TRAVERSE - LONGITUDINAL/PLAN 24 M/MIN RAPID TRAVERSE Y - DIRECTION 16 M / MIN C-AXIS 20 MIN ¹ SPINDLE HOLE DIAMETER 65 MM SPINDLE MOTOR 15 KW FRä SSPINDELMOTOR 5.5 KW SPINDLE SPEED: 5000 MIN ¹ NUMBER TOOL PLACES IN LOWER TURRET 12 OF WHICH ARE POWERED STATIONS 12 TOTAL POWER CONSUMPTION APPROX. 40 KVA MACHINE WEIGHT APPROX. 5,500 KG SPACE REQUIREMENT APPROX. 3.5 X 1.8 X 2 M ADDITIONAL INFORMATION -CENTER PUMA 2000 LY -TAILSTOCK -ROTARY LENGTH 760 MM -TOOL TURRET 12 SPECIALIST -FEED 170 MM SPINDLE CHIP TOOLS FEED -HIGH PRESSURE COOLANT SUPPLY 7 BAR -VARIOUS CONTROL OPTIONS. DRIVEN TOOL HOLDER MEASURING ARM BAR LOADERS IEMCA ADVANTAGE 66 MM LENG 1500 MM
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 13.250 €
Ubicación: Land-; gross weight [kg]: 1980; engine: doosan d1146t; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 340 ; GROSS WEIGHT [KG]: 1980; ENGINE: DOOSAN D1146T; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 340
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-x-axis: 762 mm
y-axis: 410 mm
z-axis: 510 mm
distance from spindle nose to table top:150-660 mm
distance from spindle center to column: 457 mm
table size: 920-430 mm
table loadinf capacity: 600 kg
spindle: max. spindle speed: 8000 rpm
machine height: 2710 mm
machine dimensions (lyw) 2390x2140 mm
machine weight: 5000 kg X-AXIS: 762 MM Y-AXIS: 410 MM Z-AXIS: 510 MM DISTANCE FROM SPINDLE NOSE TO TABLE TOP:150-660 MM DISTANCE FROM SPINDLE CENTER TO COLUMN: 457 MM TABLE SIZE: 920-430 MM TABLE LOADINF CAPACITY: 600 KG SPINDLE: MAX. SPINDLE SPEED: 8000 RPM MACHINE HEIGHT: 2710 MM MACHINE DIMENSIONS (LYW) 2390X2140 MM MACHINE WEIGHT: 5000 KG
Vendedor: BASTA machinery
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 630 mm<br>turning length: 0 mm<br>turret positions: 12<br>cnc brand: fanuc<br>cnc model: 21i-tb <br><p>mach-id    4209</p>
<p>make        doosan</p>
<p>type          puma 280 m</p>
<p>year         2008</p>
<p>specifications</p>
<p>swing over bed    630</p>
<p>swing                  500</p>
<p>x axis                  242</p>
<p>z axis                   680</p>
<p>controll                  fanuc 21i-tb</p>
<p>tool changer          12</p>
<p>chip conveyor        yes</p>
<p>swing over bed Ø      630 mm</p>
<p>dimensions</p>
<p>length       4000 mm</p>
<p>width         2550 mm</p>
<p>height        1900 mm</p>
<p>doosan puma 280 m cnc lathe</p>
<p>
TURNING DIAMETER: 630 MM
TURNING LENGTH: 0 MM
TURRET POSITIONS: 12
CNC BRAND: FANUC
CNC MODEL: 21I-TB

MACH-ID&NBSP; &NBSP; 4209

MAKE&NBSP; &NBSP; &NBSP; &NBSP; DOOSAN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; PUMA 280 M

YEAR&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2008

SPECIFICATIONS

SWING OVER BED&NBSP; &NBSP; 630

SWING&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 500

X AXIS&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 242

Z AXIS&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP;680

CONTROLL&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; FANUC 21I-TB

TOOL CHANGER&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 12

CHIP CONVEYOR&NBSP; &NBSP; &NBSP; &NBSP; YES

SWING OVER BED Ø&NBSP; &NBSP; &NBSP; 630 MM

DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; &NBSP;4000 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2550 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP; 1900 MM

DOOSAN PUMA 280 M CNC LATHE

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-year 2009
spindle diameter: 450mm
rotary diameter on the bench: 1030mm
rotary diameter on
cross slide: 800 mm
recommended turning diameter: 600mm
max. turning diameter: 900mm
max. turning length: 1600mm
x-axis stroke: 470 mm
z-axis stroke: 1650mm
rapid in x: 12m / min
rapid in z: 16m / min
maximum spindle speed: 1800u / min
spindle bore: 117,5mm
motor power: 45kw
torque: 5419 nm
stations in the turret: 12
section tool 32x32mm
bar capacity: 80mm
of the turret switching time: 1,1sec
tailstock stroke: 150mm
tube support: mk6 YEAR 2009 SPINDLE DIAMETER: 450MM ROTARY DIAMETER ON THE BENCH: 1030MM ROTARY DIAMETER ON CROSS SLIDE: 800 MM RECOMMENDED TURNING DIAMETER: 600MM MAX. TURNING DIAMETER: 900MM MAX. TURNING LENGTH: 1600MM X-AXIS STROKE: 470 MM Z-AXIS STROKE: 1650MM RAPID IN X: 12M / MIN RAPID IN Z: 16M / MIN MAXIMUM SPINDLE SPEED: 1800U / MIN SPINDLE BORE: 117,5MM MOTOR POWER: 45KW TORQUE: 5419 NM STATIONS IN THE TURRET: 12 SECTION TOOL 32X32MM BAR CAPACITY: 80MM OF THE TURRET SWITCHING TIME: 1,1SEC TAILSTOCK STROKE: 150MM TUBE SUPPORT: MK6
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-24 to, 4 m3,bucket, a/c, central greasing. 3rd valve, joystick steering; power [ps]: 354; gross weight [kg]: 24000; engine: scania dc 13; rear tyres remaining: 50; front tyres remaining: 50 24 TO, 4 M3,BUCKET, A/C, CENTRAL GREASING. 3RD VALVE, JOYSTICK STEERING; POWER [PS]: 354; GROSS WEIGHT [KG]: 24000; ENGINE: SCANIA DC 13; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50
Vendedor: Kleinheider Baumaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-turning milling center, used
main spindle (spindle left): max. turning diameter 760mm, max. bar working diameter d=76mm
st version with “s” counter spindle (spindle right) and “t” lower turret with 12 tool places
automatic tool changer with 40 places
the machine will be delivered with two 3-jaw chucks instead actually mounted workpiece clamping
control: fanuc
tooling like list
 TURNING MILLING CENTER, USED MAIN SPINDLE (SPINDLE LEFT): MAX. TURNING DIAMETER 760MM, MAX. BAR WORKING DIAMETER D=76MM ST VERSION WITH “S” COUNTER SPINDLE (SPINDLE RIGHT) AND “T” LOWER TURRET WITH 12 TOOL PLACES AUTOMATIC TOOL CHANGER WITH 40 PLACES THE MACHINE WILL BE DELIVERED WITH TWO 3-JAW CHUCKS INSTEAD ACTUALLY MOUNTED WORKPIECE CLAMPING CONTROL: FANUC TOOLING LIKE LIST
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Precio: 62.250 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-general

project no.: 904968
number: 1 pcs.
manufacturer: doosan
type: puma mx 1600 st
control: fanuc 31i ma
year of construction: 2008
state of preservation: second-hand machine
control a (hours): 24,950
drives a (hours): 8.570

description

milling

axes x/y/z/w
travel in x 450 mm
travel in y 170 mm
travel in z 935 mm
maximum rapid traverse in x/y/z 36/26/36 m / min
tool holder capto c5
maximum speed milling spindle 12000 1/min
maximum power with ed 10-40 / 100% 9/3.7 kw
maximum torque at ed 10-40 / 100% 49 nm
nc-controlled milling head swiveling
chain-type tool magazine 40 stations
max tool diameter 70 mm
max tool diameter when free neighbouring seats 95 mm
maximum tool length 200 mm
maximum tool weight 4 kg
tool change time 2.1 s

turning

maximum turning diameter 170/330 mm
maximum turning length 900 mm
maximum swing over bed 680 mm
maximum chuck diameter 175 mm
max speed main spindle 6000 1/min
maximum performance main spindle in ed 10-40 / 100% 15/11 kw
maximum torque of main spindle in ed 10-40 / 100% 208 nm
spindle passage main spindle 52 mm
spindle diameter in front bearing spindle 100 mm
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
maximum speed of 6000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 15/11 kw
max torque spindle in ed 10-40 / 100% 208 nm
spindle passage counter spindle 52 mm
spindle diameter in front bearing spindle 100 mm
axis counter spindle unit z/c

gun down
number of stations of which powered 12/12
tool holder in the turret 20 ã? 20 (dm32) mm
speed tool drive 6000 1/min
tool drive torque 23 nm
the turret of x/z axes
maximum rapid traverse in x/y/z 24 /-/ 36 m / min

more facilities

splash panel with fully encapsulated workspace
lighting in the work area
oil / emulsion mist extraction system
chip conveyor
machine is / was operated with emulsion
internal coolant supply
coolant system with paper band filter
high pressure pump
the belt of part of
precast acceptance facility
bar loader/loading rod magazine lns quick load servo 65

accessories

3 - jaw chuck
collet chuck
set of clamping jaws
1 set of tool holder for rotary tools
1 set of tool holders for driven tools
1 set of tool holder for boring and milling tools capto

general technical data

total power demand 52 kva
machine dimensions (lxwxh) approx. 3800 x 2530 x 2760 mm
machine weight kg 11600

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904968 NUMBER: 1 PCS. MANUFACTURER: DOOSAN TYPE: PUMA MX 1600 ST CONTROL: FANUC 31I MA YEAR OF CONSTRUCTION: 2008 STATE OF PRESERVATION: SECOND-HAND MACHINE CONTROL A (HOURS): 24,950 DRIVES A (HOURS): 8.570 DESCRIPTION MILLING AXES X/Y/Z/W TRAVEL IN X 450 MM TRAVEL IN Y 170 MM TRAVEL IN Z 935 MM MAXIMUM RAPID TRAVERSE IN X/Y/Z 36/26/36 M / MIN TOOL HOLDER CAPTO C5 MAXIMUM SPEED MILLING SPINDLE 12000 1/MIN MAXIMUM POWER WITH ED 10-40 / 100% 9/3.7 KW MAXIMUM TORQUE AT ED 10-40 / 100% 49 NM NC-CONTROLLED MILLING HEAD SWIVELING CHAIN-TYPE TOOL MAGAZINE 40 STATIONS MAX TOOL DIAMETER 70 MM MAX TOOL DIAMETER WHEN FREE NEIGHBOURING SEATS 95 MM MAXIMUM TOOL LENGTH 200 MM MAXIMUM TOOL WEIGHT 4 KG TOOL CHANGE TIME 2.1 S TURNING MAXIMUM TURNING DIAMETER 170/330 MM MAXIMUM TURNING LENGTH 900 MM MAXIMUM SWING OVER BED 680 MM MAXIMUM CHUCK DIAMETER 175 MM MAX SPEED MAIN SPINDLE 6000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 15/11 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 208 NM SPINDLE PASSAGE MAIN SPINDLE 52 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 100 MM AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED OF 6000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 15/11 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 208 NM SPINDLE PASSAGE COUNTER SPINDLE 52 MM SPINDLE DIAMETER IN FRONT BEARING SPINDLE 100 MM AXIS COUNTER SPINDLE UNIT Z/C GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET 20 &ATILDE;? 20 (DM32) MM SPEED TOOL DRIVE 6000 1/MIN TOOL DRIVE TORQUE 23 NM THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 24 /-/ 36 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE LIGHTING IN THE WORK AREA OIL / EMULSION MIST EXTRACTION SYSTEM CHIP CONVEYOR MACHINE IS / WAS OPERATED WITH EMULSION INTERNAL COOLANT SUPPLY COOLANT SYSTEM WITH PAPER BAND FILTER HIGH PRESSURE PUMP THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/LOADING ROD MAGAZINE LNS QUICK LOAD SERVO 65 ACCESSORIES 3 - JAW CHUCK COLLET CHUCK SET OF CLAMPING JAWS 1 SET OF TOOL HOLDER FOR ROTARY TOOLS 1 SET OF TOOL HOLDERS FOR DRIVEN TOOLS 1 SET OF TOOL HOLDER FOR BORING AND MILLING TOOLS CAPTO GENERAL TECHNICAL DATA TOTAL POWER DEMAND 52 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 3800 X 2530 X 2760 MM MACHINE WEIGHT KG 11600 COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-spindle diameter:  mm<br/>x travel:  mm<br/>y travel:  mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- number of processing axes (excl parallel axes):      4  <br/>- x-axis travel:   3000 mm<br/>- y-axis travel:   2000 mm<br/>- z-axis travel:   1600 mm<br/>- w-axis travel:    750 mm<br/>table:  <br/>- table surface (left-right):   1600 mm<br/>- table surface (front-back):   1800 mm<br/>- workpiece load (max):  15000 kg<br/>milling spindle / head:  <br/>- spindle diameter:    130 mm<br/>- tool fixture: iso bt 50:        <br/>tool magazine:  <br/>- number of positions:     40  <br/>attachments:  <br/>- european ce standards: yes:        <br/>2 x table 1600 x 1600 mm<br/>aprox 8.000 working hours (aug. 2018)<br/><br/>under power<br/><br/><br/><br/><br/> SPINDLE DIAMETER: MM
X TRAVEL: MM
Y TRAVEL: MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- NUMBER OF PROCESSING AXES (EXCL PARALLEL AXES): 4
- X-AXIS TRAVEL: 3000 MM
- Y-AXIS TRAVEL: 2000 MM
- Z-AXIS TRAVEL: 1600 MM
- W-AXIS TRAVEL: 750 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1600 MM
- TABLE SURFACE (FRONT-BACK): 1800 MM
- WORKPIECE LOAD (MAX): 15000 KG
MILLING SPINDLE / HEAD:
- SPINDLE DIAMETER: 130 MM
- TOOL FIXTURE: ISO BT 50:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 40
ATTACHMENTS:
- EUROPEAN CE STANDARDS: YES:
2 X TABLE 1600 X 1600 MM
APROX 8.000 WORKING HOURS (AUG. 2018)

UNDER POWER




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-doosan s 310 sml 5-axis slant bed cnc lathes with driven tools

control: fanuc 18 ttc

with counter spindle, 2 c-axes, sauter vdi 30 turret

initial start up 2007

ran in single-shift operation

flat guides on all axes

technical data:

diameter over bed: 500mm
ogjyzfu
maximum turning diameter: 310 mm
maximum turning length: 530 mm
slant bed 30â°
bar passage: 66 mm spindle, 24 mm sub spindle
2 c-axis

main spindle:
spindle bore 77 mm
speed range 40-4500u/min stepless
max torque 186nm
c1 axis 0-360 â° / 0.001 â°

sub spindle:
spindle bore 37 mm
speed range 40-4500u/min stepless
max torque 74nm
c2 axis 0-360 â° / 0.001 â°
fully synchronous
location-friendly takeover

axis travel:

x 200mm
z 560mm
b 470mm

rapid traverse:
x 24m / min
z 30m / min
b-24 m/min
c1/2 30m / min

turret:

vdi 30 sauter
12 stations up to 3000 rpm
switching time 0.2 sec

main spindle 15kw
sub spindle 5, 5kw

power 35kva/63a/t

footprint 3400x1900mm
weight 3500kg

accessories:

advanced coolant unit with high pressure pump
clamping stroke control on both spindles
2 x collet chuck marquart
1 x three-jaw chuck kitagawa b-210
1 x three-jaw chuck kitagawa b-206
signal lamp
part conveyor
b-axis drive (new)
numerous recordings (see pictures)
documentation
work light
central lubrication system
double foot switch
chip conveyor

fmb bar loader 3000 mm diameter 65 mm with various clamping sleeve (see picture)

loading and application including DOOSAN S 310 SML 5-AXIS SLANT BED CNC LATHES WITH DRIVEN TOOLS CONTROL: FANUC 18 TTC WITH COUNTER SPINDLE, 2 C-AXES, SAUTER VDI 30 TURRET INITIAL START UP 2007 RAN IN SINGLE-SHIFT OPERATION FLAT GUIDES ON ALL AXES TECHNICAL DATA: DIAMETER OVER BED: 500MM OGJYZFU MAXIMUM TURNING DIAMETER: 310 MM MAXIMUM TURNING LENGTH: 530 MM SLANT BED 30&ACIRC;&DEG; BAR PASSAGE: 66 MM SPINDLE, 24 MM SUB SPINDLE 2 C-AXIS MAIN SPINDLE: SPINDLE BORE 77 MM SPEED RANGE 40-4500U/MIN STEPLESS MAX TORQUE 186NM C1 AXIS 0-360 &ACIRC;&DEG; / 0.001 &ACIRC;&DEG; SUB SPINDLE: SPINDLE BORE 37 MM SPEED RANGE 40-4500U/MIN STEPLESS MAX TORQUE 74NM C2 AXIS 0-360 &ACIRC;&DEG; / 0.001 &ACIRC;&DEG; FULLY SYNCHRONOUS LOCATION-FRIENDLY TAKEOVER AXIS TRAVEL: X 200MM Z 560MM B 470MM RAPID TRAVERSE: X 24M / MIN Z 30M / MIN B-24 M/MIN C1/2 30M / MIN TURRET: VDI 30 SAUTER 12 STATIONS UP TO 3000 RPM SWITCHING TIME 0.2 SEC MAIN SPINDLE 15KW SUB SPINDLE 5, 5KW POWER 35KVA/63A/T FOOTPRINT 3400X1900MM WEIGHT 3500KG ACCESSORIES: ADVANCED COOLANT UNIT WITH HIGH PRESSURE PUMP CLAMPING STROKE CONTROL ON BOTH SPINDLES 2 X COLLET CHUCK MARQUART 1 X THREE-JAW CHUCK KITAGAWA B-210 1 X THREE-JAW CHUCK KITAGAWA B-206 SIGNAL LAMP PART CONVEYOR B-AXIS DRIVE (NEW) NUMEROUS RECORDINGS (SEE PICTURES) DOCUMENTATION WORK LIGHT CENTRAL LUBRICATION SYSTEM DOUBLE FOOT SWITCH CHIP CONVEYOR FMB BAR LOADER 3000 MM DIAMETER 65 MM WITH VARIOUS CLAMPING SLEEVE (SEE PICTURE) LOADING AND APPLICATION INCLUDING
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 500 mm<br/>turning length: 500 mm<br/>control: fanuc 18i-tb <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>fanuc 18 i-tb cnc control<br/>3-jaw chuck<br/>c-axis<br/>driven tools<br/>y-axis<br/>12 fold turret head<br/>tail stock<br/>chip conveyor<br/>coolant device<br/><br/>technische daten / technical details:<br/>max. umlauf-? über bett / max. swing ? over bed    600    mm<br/>max. umlauf-? über schlitten / max. swing ? over sledge    550    mm<br/>max. drehlänge / max. turning length    500    mm<br/>x-achsen verfahrweg / x-axis travel    250    mm<br/>z-achsen verfahrweg / z-axis travel    580    mm<br/>y-achsen verfahrweg / y-axis travel    +- 50    mm<br/>spindelbohrung / spindle hole    76    mm<br/>drehzahl / spindle speed    3500    upm /rpm<br/>drehzahl angetr. wkz /speed of driven tools    5000    upm /rpm<br/>werkzeugrevolver / turret head    12    fach /holes<br/>eilgang x / rapid feed x    20    m/min<br/>eilgang z / rapid feed z    24    m/min.<br/>antriebsleistung spindel / drive capacity spindle    22/15    kw<br/>gewicht der maschine ca. / weight ca.    4800    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 500 MM
TURNING LENGTH: 500 MM
CONTROL: FANUC 18I-TB
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
FANUC 18 I-TB CNC CONTROL
3-JAW CHUCK
C-AXIS
DRIVEN TOOLS
Y-AXIS
12 FOLD TURRET HEAD
TAIL STOCK
CHIP CONVEYOR
COOLANT DEVICE

TECHNISCHE DATEN / TECHNICAL DETAILS:
MAX. UMLAUF-? üBER BETT / MAX. SWING ? OVER BED 600 MM
MAX. UMLAUF-? üBER SCHLITTEN / MAX. SWING ? OVER SLEDGE 550 MM
MAX. DREHLäNGE / MAX. TURNING LENGTH 500 MM
X-ACHSEN VERFAHRWEG / X-AXIS TRAVEL 250 MM
Z-ACHSEN VERFAHRWEG / Z-AXIS TRAVEL 580 MM
Y-ACHSEN VERFAHRWEG / Y-AXIS TRAVEL +- 50 MM
SPINDELBOHRUNG / SPINDLE HOLE 76 MM
DREHZAHL / SPINDLE SPEED 3500 UPM /RPM
DREHZAHL ANGETR. WKZ /SPEED OF DRIVEN TOOLS 5000 UPM /RPM
WERKZEUGREVOLVER / TURRET HEAD 12 FACH /HOLES
EILGANG X / RAPID FEED X 20 M/MIN
EILGANG Z / RAPID FEED Z 24 M/MIN.
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 22/15 KW
GEWICHT DER MASCHINE CA. / WEIGHT CA. 4800 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.






Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Ubicación: Land-swing over bed: 590 mmdurchmesserdurchmesser about the rest: 170 mm
description:
the machine is in good technical condition, the possibility of testing, by prior arrangement. x / z axis rapid tracking m / min 30/36 x / z axis working feed interpolation (max.) mm / f 500 / 500 ball screw diameter x / z mm 28/32 tool sleeve piece 4 different tools for lathe / drill tool size mm 20 x 20 / ã?32 preparation for internal / external high pressure cooling yes tool holder tool tool holders external processing tool piece 1 double tool holder for external machining unit 1 stopper tool holders pcs 2 stop er lid pcs 1 reduce usage for stopper tool holders pcs 1 set workspace of maximum rotating diameter over the bed 590 mm maximum circular diameter of the worktop mm 170 maximum turning length with chuck 322 mm of turning rod diameter 45 mm maximum workpiece weight without tailstock (including feed weight = 12 kg) kg 70 accessories automatic high pressure tool cooling beams 6 coolant reservoir with a capacity of 100 chip conveyor with hydraulic power pack - right outlet automatic lubrication system of electrical heat exchangers with heat exchanger installation machine cooled lighting of workroom transformer operating instructions in the czech ce declaration of conformity with ce standards rod feeder 3 m workpiece picking hand (ã?65 x l140 mm, weight 2 kg) sealing machine for doosan fosuc-0i-td control motors a digital inverter spindle and single axis fanuc controlled x, z axes screen type 8.4 "lcd color cast iron bed with inclined support - oblique - 60 total weight (approx.) kg 2900 machine dimensions d w / v mm 2327/1600/1995 spindle clamp - asa a2-5 hydraulic" chuck with three jaws, diameter mm 170 soft jaw set and hardened jaws sets spindle speed u / min 6000 spindle motor power (constant / 30 min.) kw 11/15 maximum available power of ot / min 1500 ~ 3500 spindle motor maximum torque (permanent / 30 min.) nm 70/95 of front bearing diameter mm 90 spindle diameter mm 53 internal diameter of train pipe 46 mm stroke x axis stroke 450 z axis stroke mm 330 SWING OVER BED: 590 MMDURCHMESSERDURCHMESSER ABOUT THE REST: 170 MM DESCRIPTION: THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. X / Z AXIS RAPID TRACKING M / MIN 30/36 X / Z AXIS WORKING FEED INTERPOLATION (MAX.) MM / F 500 / 500 BALL SCREW DIAMETER X / Z MM 28/32 TOOL SLEEVE PIECE 4 DIFFERENT TOOLS FOR LATHE / DRILL TOOL SIZE MM 20 X 20 / &ATILDE;?32 PREPARATION FOR INTERNAL / EXTERNAL HIGH PRESSURE COOLING YES TOOL HOLDER TOOL TOOL HOLDERS EXTERNAL PROCESSING TOOL PIECE 1 DOUBLE TOOL HOLDER FOR EXTERNAL MACHINING UNIT 1 STOPPER TOOL HOLDERS PCS 2 STOP ER LID PCS 1 REDUCE USAGE FOR STOPPER TOOL HOLDERS PCS 1 SET WORKSPACE OF MAXIMUM ROTATING DIAMETER OVER THE BED 590 MM MAXIMUM CIRCULAR DIAMETER OF THE WORKTOP MM 170 MAXIMUM TURNING LENGTH WITH CHUCK 322 MM OF TURNING ROD DIAMETER 45 MM MAXIMUM WORKPIECE WEIGHT WITHOUT TAILSTOCK (INCLUDING FEED WEIGHT = 12 KG) KG 70 ACCESSORIES AUTOMATIC HIGH PRESSURE TOOL COOLING BEAMS 6 COOLANT RESERVOIR WITH A CAPACITY OF 100 CHIP CONVEYOR WITH HYDRAULIC POWER PACK - RIGHT OUTLET AUTOMATIC LUBRICATION SYSTEM OF ELECTRICAL HEAT EXCHANGERS WITH HEAT EXCHANGER INSTALLATION MACHINE COOLED LIGHTING OF WORKROOM TRANSFORMER OPERATING INSTRUCTIONS IN THE CZECH CE DECLARATION OF CONFORMITY WITH CE STANDARDS ROD FEEDER 3 M WORKPIECE PICKING HAND (&ATILDE;?65 X L140 MM, WEIGHT 2 KG) SEALING MACHINE FOR DOOSAN FOSUC-0I-TD CONTROL MOTORS A DIGITAL INVERTER SPINDLE AND SINGLE AXIS FANUC CONTROLLED X, Z AXES SCREEN TYPE 8.4 "LCD COLOR CAST IRON BED WITH INCLINED SUPPORT - OBLIQUE - 60 TOTAL WEIGHT (APPROX.) KG 2900 MACHINE DIMENSIONS D W / V MM 2327/1600/1995 SPINDLE CLAMP - ASA A2-5 HYDRAULIC" CHUCK WITH THREE JAWS, DIAMETER MM 170 SOFT JAW SET AND HARDENED JAWS SETS SPINDLE SPEED U / MIN 6000 SPINDLE MOTOR POWER (CONSTANT / 30 MIN.) KW 11/15 MAXIMUM AVAILABLE POWER OF OT / MIN 1500 ~ 3500 SPINDLE MOTOR MAXIMUM TORQUE (PERMANENT / 30 MIN.) NM 70/95 OF FRONT BEARING DIAMETER MM 90 SPINDLE DIAMETER MM 53 INTERNAL DIAMETER OF TRAIN PIPE 46 MM STROKE X AXIS STROKE 450 Z AXIS STROKE MM 330
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 5750; engine: doosan dp222lf; accessories: drip pan, switching panel, volt meter, ampere meter, hertz meter, start battery, exhaust system; power type: 4000002 ; GROSS WEIGHT [KG]: 5750; ENGINE: DOOSAN DP222LF; ACCESSORIES: DRIP PAN, SWITCHING PANEL, VOLT METER, AMPERE METER, HERTZ METER, START BATTERY, EXHAUST SYSTEM; POWER TYPE: 4000002
Vendedor: BREDENOORD
Año de construcción: usado
Ubicación: Land-swing over bed: 590 mmdurchmesserdurchmesser about the rest: 170 mm
the machine is in good technical condition, the possibility of testing, by prior arrangement. spindle diameter mm 53 internal diameter of train pipe mm 46 strokes x axis stroke 450 z axis stroke mm 330 speed x / z axial stroke m / min 30/36 x / z axis line implementing interpolation (max.) mm / 500 / 500 ball screw diameter x rpm z mm 28/32 tool sleeve piece 4 different tools for lathe / drill tool size mm 20 x 20 / ã?32 preparation for internal / external high pressure cooling yes tool holder tool tool holders external processing tool piece 1 double tool holder for external machining unit 1 stopper tool holders pcs 2 stop er lid pcs 1 reduce usage for stopper tool holders pcs 1 set workspace of maximum rotating diameter over the bed 590 mm maximum circular diameter over the pad mm 170 maximum turning length with chuck 322 mm max. turning rod diameter mm 45 maximum workpiece weight without tailstock (including feed weight = 12 kg) kg 70 accessory automatic high pressure tool cooling beams 6 coolant reservoir with a capacity of 100 chip conveyor with right outlet hydraulic power pack -cooled automatic lubrication system of electrical heat exchangers with heat exchanger installation machine working area lighting transformer operating instructions in the czech ce declaration of conformity with ce standards rod feeder 3 m workpiece picking hand (ã?65 x l140 mm, weight 2 kg) sealing machine for doosan fosuc-0i-td control motors of a digital inverter spindles and single axis fanuc controlled axes x, z 8.4 "lcd color screen type SWING OVER BED: 590 MMDURCHMESSERDURCHMESSER ABOUT THE REST: 170 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. SPINDLE DIAMETER MM 53 INTERNAL DIAMETER OF TRAIN PIPE MM 46 STROKES X AXIS STROKE 450 Z AXIS STROKE MM 330 SPEED X / Z AXIAL STROKE M / MIN 30/36 X / Z AXIS LINE IMPLEMENTING INTERPOLATION (MAX.) MM / 500 / 500 BALL SCREW DIAMETER X RPM Z MM 28/32 TOOL SLEEVE PIECE 4 DIFFERENT TOOLS FOR LATHE / DRILL TOOL SIZE MM 20 X 20 / &ATILDE;?32 PREPARATION FOR INTERNAL / EXTERNAL HIGH PRESSURE COOLING YES TOOL HOLDER TOOL TOOL HOLDERS EXTERNAL PROCESSING TOOL PIECE 1 DOUBLE TOOL HOLDER FOR EXTERNAL MACHINING UNIT 1 STOPPER TOOL HOLDERS PCS 2 STOP ER LID PCS 1 REDUCE USAGE FOR STOPPER TOOL HOLDERS PCS 1 SET WORKSPACE OF MAXIMUM ROTATING DIAMETER OVER THE BED 590 MM MAXIMUM CIRCULAR DIAMETER OVER THE PAD MM 170 MAXIMUM TURNING LENGTH WITH CHUCK 322 MM MAX. TURNING ROD DIAMETER MM 45 MAXIMUM WORKPIECE WEIGHT WITHOUT TAILSTOCK (INCLUDING FEED WEIGHT = 12 KG) KG 70 ACCESSORY AUTOMATIC HIGH PRESSURE TOOL COOLING BEAMS 6 COOLANT RESERVOIR WITH A CAPACITY OF 100 CHIP CONVEYOR WITH RIGHT OUTLET HYDRAULIC POWER PACK -COOLED AUTOMATIC LUBRICATION SYSTEM OF ELECTRICAL HEAT EXCHANGERS WITH HEAT EXCHANGER INSTALLATION MACHINE WORKING AREA LIGHTING TRANSFORMER OPERATING INSTRUCTIONS IN THE CZECH CE DECLARATION OF CONFORMITY WITH CE STANDARDS ROD FEEDER 3 M WORKPIECE PICKING HAND (&ATILDE;?65 X L140 MM, WEIGHT 2 KG) SEALING MACHINE FOR DOOSAN FOSUC-0I-TD CONTROL MOTORS OF A DIGITAL INVERTER SPINDLES AND SINGLE AXIS FANUC CONTROLLED AXES X, Z 8.4 "LCD COLOR SCREEN TYPE
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 28.200 €
Ubicación: Land-; gross weight [kg]: 2835; engine: doosan p086 ti; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 489 ; GROSS WEIGHT [KG]: 2835; ENGINE: DOOSAN P086 TI; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 489
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-classification	l136ti
cylinder	l6
aspiration	ti
displacement (liter)	8.1
bore x stroke (mm)	111 x 139
kw(ps)/rpm heavy duty*	169(230) @ 2200
dimension (l×w×h) (mm)	1364 x 911 x 937
dry weight (kg)	773
emissions	tier 2
power range (kw)	169
speed range (rpm)	2200
* the value is based on output (iso 3046, 8528).

 CLASSIFICATION L136TI CYLINDER L6 ASPIRATION TI DISPLACEMENT (LITER) 8.1 BORE X STROKE (MM) 111 X 139 KW(PS)/RPM HEAVY DUTY* 169(230) @ 2200 DIMENSION (L×W×H) (MM) 1364 X 911 X 937 DRY WEIGHT (KG) 773 EMISSIONS TIER 2 POWER RANGE (KW) 169 SPEED RANGE (RPM) 2200 * THE VALUE IS BASED ON OUTPUT (ISO 3046, 8528).
Vendedor: AMP-Energy
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 510 mm<br>turning length: 320 mm<br>turret positions: 0<br>cnc brand: fanuc <br><p>mach-id    4217</p>
<p>make         doosan</p>
<p>type           lynx 220 l</p>
<p>year          2013</p>
<p>specifications</p>
<p>swing over bed Ø   510 mm</p>
<p>control        fanuc</p>
<p>swing over cross slide     290 mm</p>
<p>distance between centres      320 mm</p>
<p>spindle bore      45 mm</p>
<p>spindle speeds / ranges    6000 rpm</p>
<p>power      15 kw</p>
<p>dimensions      </p>
<p>length      2400 mm</p>
<p>width       1600 mm</p>
<p>height       2000 mm</p>
<p>
TURNING DIAMETER: 510 MM
TURNING LENGTH: 320 MM
TURRET POSITIONS: 0
CNC BRAND: FANUC

MACH-ID&NBSP; &NBSP; 4217

MAKE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;DOOSAN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP;LYNX 220 L

YEAR&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 2013

SPECIFICATIONS

SWING OVER BED Ø&NBSP; &NBSP;510 MM

CONTROL&NBSP; &NBSP; &NBSP; &NBSP; FANUC

SWING OVER CROSS SLIDE&NBSP; &NBSP; &NBSP;290 MM

DISTANCE BETWEEN CENTRES&NBSP; &NBSP; &NBSP; 320 MM

SPINDLE BORE&NBSP; &NBSP; &NBSP; 45 MM

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; 6000 RPM

POWER&NBSP; &NBSP; &NBSP; 15 KW

DIMENSIONS&NBSP; &NBSP; &NBSP;

LENGTH&NBSP; &NBSP; &NBSP; 2400 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP;1600 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP;2000 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-specifications

classification	l136
cylinder	l6
aspiration	na
displacement (liter)	8.1
bore x stroke (mm)	111 x 139
kw(ps)/rpm heavy duty*	118(160) @ 2200
kw(ps)/rpm medium duty*	-
kw(ps)/rpm light duty*	-
dimension (l×w×h) (mm)	1266 x 875 x 937
dry weight (kg)	743
emissions	tier 1
power range (kw)	118
speed range (rpm)	2200
* the value is based on output (iso 3046, 8528).



 SPECIFICATIONS CLASSIFICATION L136 CYLINDER L6 ASPIRATION NA DISPLACEMENT (LITER) 8.1 BORE X STROKE (MM) 111 X 139 KW(PS)/RPM HEAVY DUTY* 118(160) @ 2200 KW(PS)/RPM MEDIUM DUTY* - KW(PS)/RPM LIGHT DUTY* - DIMENSION (L×W×H) (MM) 1266 X 875 X 937 DRY WEIGHT (KG) 743 EMISSIONS TIER 1 POWER RANGE (KW) 118 SPEED RANGE (RPM) 2200 * THE VALUE IS BASED ON OUTPUT (ISO 3046, 8528).
Vendedor: AMP-Energy
Año de construcción: usado
Ubicación: Land-<br>table length: 1200 mm<br>table width: 540 mm<br>longitudinal x: 1020 mm<br>cross y: 540 mm<br>vertical z: 530 mm<br>positions atc: 24  <br>positions apc: 0  <br>cnc brand: fanuc <br><p>mach-id    4218</p>
<p>make        doosan</p>
<p>type          mynx 5400 / 50</p>
<p>year         2010</p>
<p>specifications</p>
<p>x - travel        1020 mm</p>
<p>y - travel          540 mm</p>
<p>z - travel           530 mm</p>
<p>controll            fanuc</p>
<p>table length x width          1200 x 540 mm</p>
<p>table load in kg         800 kg</p>
<p>spindle taper        bt 50</p>
<p>kw power on spindle        15 kw</p>
<p>spindle speeds / ranges      8000 rpm</p>
<p>atc tool changer     24</p>
<p>coolant true spindle / bar    10 bar</p>
<p>number off controlled axis       3 + 1</p>
<p>dimensions</p>
<p>length       5300 mm</p>
<p>width        3400 mm</p>
<p>height       3000 mm</p>
<p>
TABLE LENGTH: 1200 MM
TABLE WIDTH: 540 MM
LONGITUDINAL X: 1020 MM
CROSS Y: 540 MM
VERTICAL Z: 530 MM
POSITIONS ATC: 24  
POSITIONS APC: 0  
CNC BRAND: FANUC

MACH-ID&NBSP; &NBSP; 4218

MAKE&NBSP; &NBSP; &NBSP; &NBSP; DOOSAN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; MYNX 5400 / 50

YEAR&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2010

SPECIFICATIONS

X - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP; 1020 MM

Y - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 540 MM

Z - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP;530 MM

CONTROLL&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP; FANUC

TABLE LENGTH X WIDTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 1200 X 540 MM

TABLE LOAD IN KG&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;800 KG

SPINDLE TAPER&NBSP; &NBSP; &NBSP; &NBSP; BT 50

KW POWER ON SPINDLE&NBSP; &NBSP; &NBSP; &NBSP; 15 KW

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; &NBSP; 8000 RPM

ATC TOOL CHANGER&NBSP; &NBSP; &NBSP;24

COOLANT TRUE SPINDLE / BAR&NBSP; &NBSP; 10 BAR

NUMBER OFF CONTROLLED AXIS&NBSP; &NBSP; &NBSP; &NBSP;3 + 1

DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; &NBSP;5300 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP; 3400 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP;3000 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-model l126ti
no. of cyl. l6
aspiration ti
displacement (liter) 11.1
bore x stroke (mm) 123x155
output (iso 3046, 8528 kw(ps)/rpm)
265(360) / 2000
-
dimension (l×w×h) 1235x855x1073
dry weight (kg) 1,060
emission tier-2  MODEL L126TI NO. OF CYL. L6 ASPIRATION TI DISPLACEMENT (LITER) 11.1 BORE X STROKE (MM) 123X155 OUTPUT (ISO 3046, 8528 KW(PS)/RPM) 265(360) / 2000 - DIMENSION (L×W×H) 1235X855X1073 DRY WEIGHT (KG) 1,060 EMISSION TIER-2
Vendedor: AMP-Energy
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 780 mm<br>turning length: 1310 mm<br>turret positions: 0<br>cnc brand: fanuc <br><p>mach-id   4219</p>
<p>make       doosan</p>
<p>type         2600 l</p>
<p>year       2012</p>
<p>specifications</p>
<p>swing over bed Ø       780 mm</p>
<p>swing over cross slide     630 mm</p>
<p>distance between centres      1310 mm</p>
<p>spindle bore      76 mm</p>
<p>spindle speeds / ranges     3500 rpm</p>
<p>power        22 kw</p>
<p>dimensions</p>
<p>length      3600 mm</p>
<p>width       2000 mm</p>
<p>height      2000 mm</p>
<p>
TURNING DIAMETER: 780 MM
TURNING LENGTH: 1310 MM
TURRET POSITIONS: 0
CNC BRAND: FANUC

MACH-ID&NBSP; &NBSP;4219

MAKE&NBSP; &NBSP; &NBSP; &NBSP;DOOSAN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2600 L

YEAR&NBSP; &NBSP; &NBSP; &NBSP;2012

SPECIFICATIONS

SWING OVER BED Ø&NBSP; &NBSP; &NBSP; &NBSP;780 MM

SWING OVER CROSS SLIDE&NBSP; &NBSP; &NBSP;630 MM

DISTANCE BETWEEN CENTRES&NBSP; &NBSP; &NBSP; 1310 MM

SPINDLE BORE&NBSP; &NBSP; &NBSP; 76 MM

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; &NBSP;3500 RPM

POWER&NBSP; &NBSP; &NBSP; &NBSP; 22 KW

DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; 3600 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP;2000 MM

HEIGHT&NBSP; &NBSP; &NBSP; 2000 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-doosan puma 400 mb
mfg. year 05/2010
fanuc 32 i model a with manual guide i
max turning diameter 550 mm
max swing diameter over bed 770 mm
max swing over saddle 590 mm
maximum turning length 1,043 mm
max cash working capacity 117 mm
movements x/z 362 mm / 1.105 mm
spindle motor 22/26 kw
a2-11 spindle nose
maximum spindle speed of 2,000 rpm
12-station turret, bmt75
driven tools max speed 3,000 rpm
smw car block steady rest slu-4-ms, diameter 30-245 mm
tailstock mt #6
tool setter
swarf conveyor
3-jawchuck diameter 381 mm, samchully hch-15
ce-mark DOOSAN PUMA 400 MB MFG. YEAR 05/2010 FANUC 32 I MODEL A WITH MANUAL GUIDE I MAX TURNING DIAMETER 550 MM MAX SWING DIAMETER OVER BED 770 MM MAX SWING OVER SADDLE 590 MM MAXIMUM TURNING LENGTH 1,043 MM MAX CASH WORKING CAPACITY 117 MM MOVEMENTS X/Z 362 MM / 1.105 MM SPINDLE MOTOR 22/26 KW A2-11 SPINDLE NOSE MAXIMUM SPINDLE SPEED OF 2,000 RPM 12-STATION TURRET, BMT75 DRIVEN TOOLS MAX SPEED 3,000 RPM SMW CAR BLOCK STEADY REST SLU-4-MS, DIAMETER 30-245 MM TAILSTOCK MT #6 TOOL SETTER SWARF CONVEYOR 3-JAWCHUCK DIAMETER 381 MM, SAMCHULLY HCH-15 CE-MARK
Vendedor: TÖRNER CNC Maschinen
Año de construcción: usado
Ubicación: Land-<br>table length: 790 mm<br>table width: 435 mm<br>longitudinal x: 635 mm<br>cross y: 435 mm<br>vertical z: 510 mm<br>positions atc: 20  <br>positions apc: 0  <br>cnc brand: fanuc<br>cnc model: oi <br><p>mach-id   4216</p>
<p>make       doosan</p>
<p>type         dnm 400 a</p>
<p>year        2010s</p>
<p>pecifications</p>
<p>x - travel       635 mm</p>
<p>y - travel       435 mm</p>
<p>z - travel        510 mm</p>
<p>controll      fanuc oi</p>
<p>table length x width      790 x 435 mm</p>
<p>table load in kg     400 kg</p>
<p>spindle taper       iso 40</p>
<p>kw power on spindle      11 kw</p>
<p>spindle speeds / ranges     8000 rpm</p>
<p>atc tool changer    20</p>
<p>number off controlled axis  3</p>
<p>dimensions</p>
<p>length         2100 mm</p>
<p>width           2400 mm</p>
<p>height          2800 mm</p>
<p>
TABLE LENGTH: 790 MM
TABLE WIDTH: 435 MM
LONGITUDINAL X: 635 MM
CROSS Y: 435 MM
VERTICAL Z: 510 MM
POSITIONS ATC: 20  
POSITIONS APC: 0  
CNC BRAND: FANUC
CNC MODEL: OI

MACH-ID&NBSP; &NBSP;4216

MAKE&NBSP; &NBSP; &NBSP; &NBSP;DOOSAN

TYPE&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;DNM 400 A

YEAR&NBSP; &NBSP; &NBSP; &NBSP; 2010S

PECIFICATIONS

X - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP;635 MM

Y - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP;435 MM

Z - TRAVEL&NBSP; &NBSP; &NBSP; &NBSP; 510 MM

CONTROLL&NBSP; &NBSP; &NBSP; FANUC OI

TABLE LENGTH X WIDTH&NBSP; &NBSP; &NBSP; 790 X 435 MM

TABLE LOAD IN KG&NBSP; &NBSP; &NBSP;400 KG

SPINDLE TAPER&NBSP; &NBSP; &NBSP; &NBSP;ISO 40

KW POWER ON SPINDLE&NBSP; &NBSP; &NBSP; 11 KW

SPINDLE SPEEDS / RANGES&NBSP; &NBSP; &NBSP;8000 RPM

ATC TOOL CHANGER&NBSP; &NBSP; 20

NUMBER OFF CONTROLLED AXIS&NBSP; 3

DIMENSIONS

LENGTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2100 MM

WIDTH&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; &NBSP;2400 MM

HEIGHT&NBSP; &NBSP; &NBSP; &NBSP; &NBSP; 2800 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-vertical m/c
doosan dnm 500
mfg. year 2011
s/no. mv0010-000722
heidenhain itnc 530 control
table size: 1,200 mm x 540 mm
x-axis: 1.020 mm
y-axis: 540 mm
z-axis: 510 mm
max spindle speed 12,000 rpm
sk-40 taper
atc 30 tools
distance from spindle nose to table top 150 â?? 660 mm
distance from spindle nose to column 587 mm
rapids x/y/z 36/36/30 m / min
maximum table load 800 kg
coolant through spindle, high pressure pump 20 bar
swarf conveyor, make lns
weight 6,500 kg
machine dimensions 3,350 x 2.284 x 2,703 mm
ce-mark VERTICAL M/C DOOSAN DNM 500 MFG. YEAR 2011 S/NO. MV0010-000722 HEIDENHAIN ITNC 530 CONTROL TABLE SIZE: 1,200 MM X 540 MM X-AXIS: 1.020 MM Y-AXIS: 540 MM Z-AXIS: 510 MM MAX SPINDLE SPEED 12,000 RPM SK-40 TAPER ATC 30 TOOLS DISTANCE FROM SPINDLE NOSE TO TABLE TOP 150 &ACIRC;?? 660 MM DISTANCE FROM SPINDLE NOSE TO COLUMN 587 MM RAPIDS X/Y/Z 36/36/30 M / MIN MAXIMUM TABLE LOAD 800 KG COOLANT THROUGH SPINDLE, HIGH PRESSURE PUMP 20 BAR SWARF CONVEYOR, MAKE LNS WEIGHT 6,500 KG MACHINE DIMENSIONS 3,350 X 2.284 X 2,703 MM CE-MARK
Vendedor: TÖRNER CNC Maschinen
Año de construcción: usado
Precio: 28.500 €
Ubicación: Land-; gross weight [kg]: 4140; engine: doosan dp158lc; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 700 ; GROSS WEIGHT [KG]: 4140; ENGINE: DOOSAN DP158LC; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 700
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, the possibility of testing, by prior arrangement. THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-turning diameter:600 mm<br/>turning length:1020 mm<br/>control:fanuc 18 it-b <br/>bar material dia.:76 mm<br/>chucking diameter:315 mm<br/>spindle drive:26/22 kw<br/>turning speeds:3.500 1/min<br/>z-axis:1095 mm<br/>b-axis:240 mm<br/>c-axis:360.000 grad<br/>y-axis:+-80 mm<br/>tools in tool magazin:40 stück<br/>total power requirement:93 kw<br/>weight of the machine ca.:12,5 t<br/>dimensions of the machine ca.:5,8 x 2,3 x 2,7 m<br/><br/>5 axis turning / milling center with 1 turret, 2 spindles and milling head  1 pcs. turret with 12 tool places internal cooling system ( ikz ) 80 bar incl. bar loader ( short 1500 mm , d = 10 - 90 mm )  incl.  ca. 60 pcs.  tools capto c6 incl.  ca. 10 pcs.  toolholder static for turret incl. 2 pcs. 3-jaw-chuck  d = 254 mm incl. 1 pcs. 2-jaw-chuck  d = 315 mm  incl. 20 sets of jaws parts catcher with belt tool eye swarf conveyer oil mist ca. 20.650 h programm on   TURNING DIAMETER:600 MM
TURNING LENGTH:1020 MM
CONTROL:FANUC 18 IT-B
BAR MATERIAL DIA.:76 MM
CHUCKING DIAMETER:315 MM
SPINDLE DRIVE:26/22 KW
TURNING SPEEDS:3.500 1/MIN
Z-AXIS:1095 MM
B-AXIS:240 MM
C-AXIS:360.000 GRAD
Y-AXIS:+-80 MM
TOOLS IN TOOL MAGAZIN:40 STüCK
TOTAL POWER REQUIREMENT:93 KW
WEIGHT OF THE MACHINE CA.:12,5 T
DIMENSIONS OF THE MACHINE CA.:5,8 X 2,3 X 2,7 M

5 AXIS TURNING / MILLING CENTER WITH 1 TURRET, 2 SPINDLES AND MILLING HEAD 1 PCS. TURRET WITH 12 TOOL PLACES INTERNAL COOLING SYSTEM ( IKZ ) 80 BAR INCL. BAR LOADER ( SHORT 1500 MM , D = 10 - 90 MM ) INCL. CA. 60 PCS. TOOLS CAPTO C6 INCL. CA. 10 PCS. TOOLHOLDER STATIC FOR TURRET INCL. 2 PCS. 3-JAW-CHUCK D = 254 MM INCL. 1 PCS. 2-JAW-CHUCK D = 315 MM INCL. 20 SETS OF JAWS PARTS CATCHER WITH BELT TOOL EYE SWARF CONVEYER OIL MIST CA. 20.650 H PROGRAMM ON
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-power on time: 40805 h	
2018 spindle was repaired	
tool changer positions: 32	
control system: fanuc 21i-mb	
table: 1200 x 500 mm	
number of axes: 3	
travel distances:	
x: 1000 mm	
y: 500 mm	
z: 600 mm	
rapid traverser rate:	
(x / y / z)30 / 30 / 24 m/min	
max. table load: 800 kg	
spindle speed: 8000 u/min	
tool holder: iso 40	
engine power: 15/11 kw	
machine dimensions:	
2467 x 3350 x 2800 mm	
machine weight: 7000 kg	
availability: 01.02.2019   POWER ON TIME: 40805 H 2018 SPINDLE WAS REPAIRED TOOL CHANGER POSITIONS: 32 CONTROL SYSTEM: FANUC 21I-MB TABLE: 1200 X 500 MM NUMBER OF AXES: 3 TRAVEL DISTANCES: X: 1000 MM Y: 500 MM Z: 600 MM RAPID TRAVERSER RATE: (X / Y / Z)30 / 30 / 24 M/MIN MAX. TABLE LOAD: 800 KG SPINDLE SPEED: 8000 U/MIN TOOL HOLDER: ISO 40 ENGINE POWER: 15/11 KW MACHINE DIMENSIONS: 2467 X 3350 X 2800 MM MACHINE WEIGHT: 7000 KG AVAILABILITY: 01.02.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: 29.000 €
Ubicación: Land-; gross weight [kg]: 3130; engine: doosan p158le; accessories: tanker, battery, control panel; water tank volume [l]: 700 ; GROSS WEIGHT [KG]: 3130; ENGINE: DOOSAN P158LE; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL; WATER TANK VOLUME [L]: 700
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-table clamping surface: 920 x 435 mmmax. spindle speed: 80-8000 1 / min. weight: 5000 kg
the machine is in good technical condition, the possibility of testing, by prior arrangement. nastr. the renishaw ts-27r-probe, the front of the measuring tool - controlled by the m function processing. renishaw omt-60-probe for workpiece dimensions and orientation, conveyor belts for chips in the tank, ã?lskimmer, zweiarmiges-atc, 30-tool magazine, high-pressure spindle cooling with filter - 12 bar, fanuc 0i manual color 10, 4 TABLE CLAMPING SURFACE: 920 X 435 MMMAX. SPINDLE SPEED: 80-8000 1 / MIN. WEIGHT: 5000 KG THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. NASTR. THE RENISHAW TS-27R-PROBE, THE FRONT OF THE MEASURING TOOL - CONTROLLED BY THE M FUNCTION PROCESSING. RENISHAW OMT-60-PROBE FOR WORKPIECE DIMENSIONS AND ORIENTATION, CONVEYOR BELTS FOR CHIPS IN THE TANK, &ATILDE;?LSKIMMER, ZWEIARMIGES-ATC, 30-TOOL MAGAZINE, HIGH-PRESSURE SPINDLE COOLING WITH FILTER - 12 BAR, FANUC 0I MANUAL COLOR 10, 4
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 30.250 €
Ubicación: Land-; gross weight [kg]: 4065; engine: doosan p158le-1; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 700 ; GROSS WEIGHT [KG]: 4065; ENGINE: DOOSAN P158LE-1; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 700
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-very nice machine built in 2008 but only 2010 operation taken with little operating hours to dispose under current to see immediately. on request we send you a video VERY NICE MACHINE BUILT IN 2008 BUT ONLY 2010 OPERATION TAKEN WITH LITTLE OPERATING HOURS TO DISPOSE UNDER CURRENT TO SEE IMMEDIATELY. ON REQUEST WE SEND YOU A VIDEO
Vendedor: CMH Trading U.G.
Año de construcción: usado
Precio: 41.750 €
Ubicación: Land-; gross weight [kg]: 4835; engine: doosan dp180la; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 850 ; GROSS WEIGHT [KG]: 4835; ENGINE: DOOSAN DP180LA; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 850
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-very nice lathes with ca 3000 operating hours, driven tools, conveyors, to visit immediately to give year of 2010 until 20.12 under power
on request we will send you a video and pictures of the accessories. VERY NICE LATHES WITH CA 3000 OPERATING HOURS, DRIVEN TOOLS, CONVEYORS, TO VISIT IMMEDIATELY TO GIVE YEAR OF 2010 UNTIL 20.12 UNDER POWER ON REQUEST WE WILL SEND YOU A VIDEO AND PICTURES OF THE ACCESSORIES.
Vendedor: CMH Trading U.G.
Año de construcción: usado
Precio: 49.500 €
Ubicación: Land-; gross weight [kg]: 4940; engine: doosan dp180lb; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 850 ; GROSS WEIGHT [KG]: 4940; ENGINE: DOOSAN DP180LB; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 850
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-fanuc 18i-tb
max turning length 1020 mm
max turning ø 540 mm
bar capacity 65 mm
spindle nose a2-6
c-axis 0.001°
spindle speeds ~ 5000 rpm
spindle power 22 kw
subspindle speeds ~ 3500 rpm
milling spindle speeds ~ 10000 rpm
milling spindle power 18.5 kw
toolchanger capacity 20
tool taper capto c6
lower revolver bmt 65p
tool capacity 12 (all driven)
driven tools speeds ~ 4000 rpm
machine weight 12500 kg
dimensions ca. 4520 x 2300 x 2600 mm
 FANUC 18I-TB MAX TURNING LENGTH 1020 MM MAX TURNING ø 540 MM BAR CAPACITY 65 MM SPINDLE NOSE A2-6 C-AXIS 0.001° SPINDLE SPEEDS ~ 5000 RPM SPINDLE POWER 22 KW SUBSPINDLE SPEEDS ~ 3500 RPM MILLING SPINDLE SPEEDS ~ 10000 RPM MILLING SPINDLE POWER 18.5 KW TOOLCHANGER CAPACITY 20 TOOL TAPER CAPTO C6 LOWER REVOLVER BMT 65P TOOL CAPACITY 12 (ALL DRIVEN) DRIVEN TOOLS SPEEDS ~ 4000 RPM MACHINE WEIGHT 12500 KG DIMENSIONS CA. 4520 X 2300 X 2600 MM
Vendedor: Blachmix
Año de construcción: usado
Precio: 38.500 €
Ubicación: Land-; gross weight [kg]: 4200; engine: doosan dp158ld; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 700 ; GROSS WEIGHT [KG]: 4200; ENGINE: DOOSAN DP158LD; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 700
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-2000
maximum cutting diameter 310 mm 
maximum cutting length 210 mm
numerical control fanuc 18 tc
x-axis 210 mm
z-axis 230 mm
nr. 2 chucks diam. 210
nr. 2 to 8 positions turrets
attack spindle jis a2-8
bar passage diameter 77 mm 
the spindle speed 3500 rpm
ii spindle speed 3500 rpm
spindle motor power 15 to 18.5 kw
chip conveyor
portal gantry loader 2000 MAXIMUM CUTTING DIAMETER 310 MM MAXIMUM CUTTING LENGTH 210 MM NUMERICAL CONTROL FANUC 18 TC X-AXIS 210 MM Z-AXIS 230 MM NR. 2 CHUCKS DIAM. 210 NR. 2 TO 8 POSITIONS TURRETS ATTACK SPINDLE JIS A2-8 BAR PASSAGE DIAMETER 77 MM THE SPINDLE SPEED 3500 RPM II SPINDLE SPEED 3500 RPM SPINDLE MOTOR POWER 15 TO 18.5 KW CHIP CONVEYOR PORTAL GANTRY LOADER
Vendedor: Industrialbay
Año de construcción: usado
Precio: 34.250 €
Ubicación: Land-; gross weight [kg]: 4140; engine: doosan dp158lc; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 700 ; GROSS WEIGHT [KG]: 4140; ENGINE: DOOSAN DP158LC; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 700
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-overview
brand: doosan
model: puma 400mc 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 2013 
location: poland
origin country: south korea 
production hours: 6215

general data
measurements width: 2179 mm 
measurements depth: 4222 mm 
measurements height: 2250 mm 
machine weight: 10200 kg

control unit
brand: fanuc model: 32ia

main drive
number of spindles: 1
spindle speed range: 1500 rpm

movement
x-axis movement: 357 mm 
z-axis movement: 1105 mm

workpiece
workpiece drm: 770x959 mm 
workpiece weight: 900 kg

turret
number of turrets: 12

media
chip conveyor: yes

additional equipment
1: 4 living tools
2: chip conveyor
3: oil separator
4: chuck (530 mm)
5: coolant pumps (14.5 bar) 6: rest
7: tailstock

see full technical specifications of this machine at: abc://bit.ly/2r12jny OVERVIEW BRAND: DOOSAN MODEL: PUMA 400MC APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2013 LOCATION: POLAND ORIGIN COUNTRY: SOUTH KOREA PRODUCTION HOURS: 6215 GENERAL DATA MEASUREMENTS WIDTH: 2179 MM MEASUREMENTS DEPTH: 4222 MM MEASUREMENTS HEIGHT: 2250 MM MACHINE WEIGHT: 10200 KG CONTROL UNIT BRAND: FANUC MODEL: 32IA MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 1500 RPM MOVEMENT X-AXIS MOVEMENT: 357 MM Z-AXIS MOVEMENT: 1105 MM WORKPIECE WORKPIECE DRM: 770X959 MM WORKPIECE WEIGHT: 900 KG TURRET NUMBER OF TURRETS: 12 MEDIA CHIP CONVEYOR: YES ADDITIONAL EQUIPMENT 1: 4 LIVING TOOLS 2: CHIP CONVEYOR 3: OIL SEPARATOR 4: CHUCK (530 MM) 5: COOLANT PUMPS (14.5 BAR) 6: REST 7: TAILSTOCK SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2R12JNY
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 57.500 €
Ubicación: Land-; gross weight [kg]: 5400; engine: doosan dp222lb; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 1000 ; GROSS WEIGHT [KG]: 5400; ENGINE: DOOSAN DP222LB; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 1000
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-overview
brand: doosan
model: vc 500
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2007
location: germany
origin country: south korea

general data
measurements width: 3360 mm 
measurements depth: 2760 mm 
measurements height: 3170 mm 
machine weight: 9200 kg

control unit
brand: fanuc
model: series 21i-mb

movement
x-axis movement: 760 mm 
y-axis movement: 510 mm 
z-axis movement: 570 mm

table
outer length: 860 mm 
outer width: 570 mm

media
main electronic connection: 113 a 
power consumption: 35.1 kva
chip conveyor: yes 
internal cooling: true

see full technical specifications of this machine at: abc://bit.ly/2za4q62
 OVERVIEW BRAND: DOOSAN MODEL: VC 500 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2007 LOCATION: GERMANY ORIGIN COUNTRY: SOUTH KOREA GENERAL DATA MEASUREMENTS WIDTH: 3360 MM MEASUREMENTS DEPTH: 2760 MM MEASUREMENTS HEIGHT: 3170 MM MACHINE WEIGHT: 9200 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 21I-MB MOVEMENT X-AXIS MOVEMENT: 760 MM Y-AXIS MOVEMENT: 510 MM Z-AXIS MOVEMENT: 570 MM TABLE OUTER LENGTH: 860 MM OUTER WIDTH: 570 MM MEDIA MAIN ELECTRONIC CONNECTION: 113 A POWER CONSUMPTION: 35.1 KVA CHIP CONVEYOR: YES INTERNAL COOLING: TRUE SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2ZA4Q62
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 61.500 €
Ubicación: Land-; gross weight [kg]: 5890; engine: doosan dp222lc; accessories: tanker, battery, control panel, stahldach; water tank volume [l]: 1000 ; GROSS WEIGHT [KG]: 5890; ENGINE: DOOSAN DP222LC; ACCESSORIES: TANKER, BATTERY, CONTROL PANEL, STAHLDACH; WATER TANK VOLUME [L]: 1000
Vendedor: DPX Power BV
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DOOSAN types: