70 ofertas

Año de construcción: usado
Ubicación: Land-table diameter: 690 mm<br/>table load: 0,5/0,25 t<br/>swivelling range: 0 - 90 motorisch grad<br/>turning speeds: 0,2 - 2,5 u/min<br/>spindle bore: 100 mm<br/>torque: 375 nm<br/>welding current: 500 ampere<br/>connected load frequency: 230 volt<br/>weight: 290 kg<br/>dimensions (lxwxh): 800 x 750 x 750 mm<br/>welding turntable with<br/>- footswitch<br/>- tilt motor<br/>- speed continuously adjustable<br/>- 500 amps welding current transmission<br/><br/><br/><br/><br/> TABLE DIAMETER: 690 MM
TABLE LOAD: 0,5/0,25 T
SWIVELLING RANGE: 0 - 90 MOTORISCH GRAD
TURNING SPEEDS: 0,2 - 2,5 U/MIN
SPINDLE BORE: 100 MM
TORQUE: 375 NM
WELDING CURRENT: 500 AMPERE
CONNECTED LOAD FREQUENCY: 230 VOLT
WEIGHT: 290 KG
DIMENSIONS (LXWXH): 800 X 750 X 750 MM
WELDING TURNTABLE WITH
- FOOTSWITCH
- TILT MOTOR
- SPEED CONTINUOUSLY ADJUSTABLE
- 500 AMPS WELDING CURRENT TRANSMISSION




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 350 mm<br/>table load: 100 / 50 kg<br/>swivelling range: 0 - 90 manuell grad<br/>turning speeds: 0,6- 6,0 u/min<br/>spindle bore: 30 mm<br/>torque: 75 nm<br/>welding current: 500 ampere<br/>connected load frequency: 230 volt<br/>welding turntable with mobile, height-adjustable machine table<br/>- footswitch<br/>- tip over winch<br/>- speed infinitely adjustable<br/>- 500 amps welding current transmission<br/><br/><br/><br/><br/> TABLE DIAMETER: 350 MM
TABLE LOAD: 100 / 50 KG
SWIVELLING RANGE: 0 - 90 MANUELL GRAD
TURNING SPEEDS: 0,6- 6,0 U/MIN
SPINDLE BORE: 30 MM
TORQUE: 75 NM
WELDING CURRENT: 500 AMPERE
CONNECTED LOAD FREQUENCY: 230 VOLT
WELDING TURNTABLE WITH MOBILE, HEIGHT-ADJUSTABLE MACHINE TABLE
- FOOTSWITCH
- TIP OVER WINCH
- SPEED INFINITELY ADJUSTABLE
- 500 AMPS WELDING CURRENT TRANSMISSION




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 495 mm<br/>table load: 300/150 kg<br/>swivelling range: 0 - 90 manuell grad<br/>turning speeds: 0,35- 5,0 u/min<br/>spindle bore: 65 mm<br/>torque: 225 nm<br/>welding current: 500 ampere<br/>connected load frequency: 230 volt<br/>weight of the machine ca.: 0,09 t<br/>dimensions: 0,65 x 0,55 x 0,55 m<br/>welding turntable with<br/>- footswitch<br/>- tilt over winch<br/>- speed continuously adjustable<br/>- 500 amps welding current transmission<br/><br/><br/><br/><br/> TABLE DIAMETER: 495 MM
TABLE LOAD: 300/150 KG
SWIVELLING RANGE: 0 - 90 MANUELL GRAD
TURNING SPEEDS: 0,35- 5,0 U/MIN
SPINDLE BORE: 65 MM
TORQUE: 225 NM
WELDING CURRENT: 500 AMPERE
CONNECTED LOAD FREQUENCY: 230 VOLT
WEIGHT OF THE MACHINE CA.: 0,09 T
DIMENSIONS: 0,65 X 0,55 X 0,55 M
WELDING TURNTABLE WITH
- FOOTSWITCH
- TILT OVER WINCH
- SPEED CONTINUOUSLY ADJUSTABLE
- 500 AMPS WELDING CURRENT TRANSMISSION




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 350 mm<br/>table load: 100 / 50 kg<br/>swivelling range: 0 - 90 manuell grad<br/>turning speeds: 0,6- 6,0 u/min<br/>spindle bore: 30 mm<br/>torque: 75 nm<br/>welding current: 500 ampere<br/>connected load frequency: 230 volt<br/>welding turntable with<br/>- footswitch<br/>- tilt over winch<br/>- speed continuously adjustable<br/>- 500 amps welding current transmission<br/><br/><br/><br/><br/> TABLE DIAMETER: 350 MM
TABLE LOAD: 100 / 50 KG
SWIVELLING RANGE: 0 - 90 MANUELL GRAD
TURNING SPEEDS: 0,6- 6,0 U/MIN
SPINDLE BORE: 30 MM
TORQUE: 75 NM
WELDING CURRENT: 500 AMPERE
CONNECTED LOAD FREQUENCY: 230 VOLT
WELDING TURNTABLE WITH
- FOOTSWITCH
- TILT OVER WINCH
- SPEED CONTINUOUSLY ADJUSTABLE
- 500 AMPS WELDING CURRENT TRANSMISSION




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 1000 kg<br/>workpiece diameter: 20-800 mm<br/>connected load frequency: 230 v<br/>speed: 80 - 1000 mm/min<br/>total power requirement: 0,1 kw<br/>weight of the machine ca.: 65 kg<br/>dimensions of the machine ca.: 520x470x390 mm<br/><br/><br/><br/><br/> WEIGHT MAX.: 1000 KG
WORKPIECE DIAMETER: 20-800 MM
CONNECTED LOAD FREQUENCY: 230 V
SPEED: 80 - 1000 MM/MIN
TOTAL POWER REQUIREMENT: 0,1 KW
WEIGHT OF THE MACHINE CA.: 65 KG
DIMENSIONS OF THE MACHINE CA.: 520X470X390 MM




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table dimensions: 800 x 800 mm<br/>table load: 1500 kg<br/>swivelling range: 0 - 105 grad<br/>turning speeds: 0,15 - 1 u/min<br/>height adjustment: 672 - 1180 mm<br/>hollow spindle diameter:  mm<br/>welding current: 500 ampere<br/>max. torque on the faceplate: 3000 nm<br/>total power requirement: 0,75 kw<br/>dimensions of the machine ca.: 1560x1120x750 m<br/>characteristics:<br/>? made in eu<br/>? self-locking gear, therefore no leading and trailing at eccentric load<br/>? hydraulic height adjustment allows almost limitless positioning<br/>? electronic quality components from schneider / siemens / delta<br/>? frequency-controlled stepless speed of the turntable<br/>? high stability through a heavy and compact design<br/>? ce certificate<br/>? very good value for money<br/>? standard version comes with remote control and dual foot pedal<br/>? 3 years warranty (see warranty conditions)<br/>? hydraulically height adjustable with locking system (for fall protection)<br/><br/><br/><br/><br/> TABLE DIMENSIONS: 800 X 800 MM
TABLE LOAD: 1500 KG
SWIVELLING RANGE: 0 - 105 GRAD
TURNING SPEEDS: 0,15 - 1 U/MIN
HEIGHT ADJUSTMENT: 672 - 1180 MM
HOLLOW SPINDLE DIAMETER: MM
WELDING CURRENT: 500 AMPERE
MAX. TORQUE ON THE FACEPLATE: 3000 NM
TOTAL POWER REQUIREMENT: 0,75 KW
DIMENSIONS OF THE MACHINE CA.: 1560X1120X750 M
CHARACTERISTICS:
? MADE IN EU
? SELF-LOCKING GEAR, THEREFORE NO LEADING AND TRAILING AT ECCENTRIC LOAD
? HYDRAULIC HEIGHT ADJUSTMENT ALLOWS ALMOST LIMITLESS POSITIONING
? ELECTRONIC QUALITY COMPONENTS FROM SCHNEIDER / SIEMENS / DELTA
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE
? HIGH STABILITY THROUGH A HEAVY AND COMPACT DESIGN
? CE CERTIFICATE
? VERY GOOD VALUE FOR MONEY
? STANDARD VERSION COMES WITH REMOTE CONTROL AND DUAL FOOT PEDAL
? 3 YEARS WARRANTY (SEE WARRANTY CONDITIONS)
? HYDRAULICALLY HEIGHT ADJUSTABLE WITH LOCKING SYSTEM (FOR FALL PROTECTION)




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 780 mm<br/>table load: 1,0 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,15 - 1,5 u/min<br/>table height adjustment:  von 780 bis 1560 mm<br/>max. torque on the faceplate: 1000 nm<br/>welding current: 500 ampere<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 780 MM
TABLE LOAD: 1,0 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,15 - 1,5 U/MIN
TABLE HEIGHT ADJUSTMENT: VON 780 BIS 1560 MM
MAX. TORQUE ON THE FACEPLATE: 1000 NM
WELDING CURRENT: 500 AMPERE
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1500 mm<br/>table load: 5 t<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>: 10000 nm<br/>0: 1,5 / 1,5 kw<br/>welding current: 700 ampere<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>  load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1500 MM
TABLE LOAD: 5 T
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
: 10000 NM
0: 1,5 / 1,5 KW
WELDING CURRENT: 700 AMPERE
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1000 mm<br/>table load: 1200 kg<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,1 - 1,0 u/min<br/>height adjustment: 1000 - 1450 mm<br/>max. torque on the faceplate: 2000 nm<br/>engine output: 0,75 / 0,55 kw<br/>welding current: 500 ampere<br/>- manual height adjustment.<br/>  - self-locking gearbox, therefore hardly any pre and after-run at eccentric<br/>    load.<br/>  - electronic components from schneider, siemens and delta.<br/>  - frequency-controlled, stepless speed of the turntable.<br/>  - high stability due to the robust construction.<br/>  - ce certificate.<br/><br/>the d-hbe series comes as a standard version with a cable remote control and a <br/>footswitch.<br/><br/>welding power transmission for max.500ampere.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1000 MM
TABLE LOAD: 1200 KG
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,1 - 1,0 U/MIN
HEIGHT ADJUSTMENT: 1000 - 1450 MM
MAX. TORQUE ON THE FACEPLATE: 2000 NM
ENGINE OUTPUT: 0,75 / 0,55 KW
WELDING CURRENT: 500 AMPERE
- MANUAL HEIGHT ADJUSTMENT.
- SELF-LOCKING GEARBOX, THEREFORE HARDLY ANY PRE AND AFTER-RUN AT ECCENTRIC
LOAD.
- ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
- FREQUENCY-CONTROLLED, STEPLESS SPEED OF THE TURNTABLE.
- HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
- CE CERTIFICATE.

THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND A
FOOTSWITCH.

WELDING POWER TRANSMISSION FOR MAX.500AMPERE.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 560 mm<br/>table load: 0,3 t<br/>swivelling range: 0 - 90 grad<br/>turning speeds: 0,25 - 4,0 u/min<br/>: 360 nm<br/>welding current: 500 ampere<br/>total power requirement: 0,4 / hand kw<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>    load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 560 MM
TABLE LOAD: 0,3 T
SWIVELLING RANGE: 0 - 90 GRAD
TURNING SPEEDS: 0,25 - 4,0 U/MIN
: 360 NM
WELDING CURRENT: 500 AMPERE
TOTAL POWER REQUIREMENT: 0,4 / HAND KW
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1400 mm<br/>table load: 5 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,05- 0,5 u/min<br/>table height adjustment:  von 1100 bis 1950 mm<br/>max. torque on the faceplate: 7000 nm<br/>welding current: 700 ampere<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 1400 MM
TABLE LOAD: 5 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,05- 0,5 U/MIN
TABLE HEIGHT ADJUSTMENT: VON 1100 BIS 1950 MM
MAX. TORQUE ON THE FACEPLATE: 7000 NM
WELDING CURRENT: 700 AMPERE
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1200 mm<br/>table load: 3 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,07- 0,7 u/min<br/>table height adjustment:  von 980 bis 1750 mm<br/>max. torque on the faceplate: 4500 nm<br/>welding current: 700 ampere<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 1200 MM
TABLE LOAD: 3 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,07- 0,7 U/MIN
TABLE HEIGHT ADJUSTMENT: VON 980 BIS 1750 MM
MAX. TORQUE ON THE FACEPLATE: 4500 NM
WELDING CURRENT: 700 AMPERE
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 5 t<br/>workpiece diameter: 100-2500 mm<br/>total power requirement: 0,8 kw<br/>weight of the machine ca.: 0,8 t<br/>dimensions of the machine ca.: 2x1,4x1,0 m<br/><br/><br/><br/><br/> WEIGHT MAX.: 5 T
WORKPIECE DIAMETER: 100-2500 MM
TOTAL POWER REQUIREMENT: 0,8 KW
WEIGHT OF THE MACHINE CA.: 0,8 T
DIMENSIONS OF THE MACHINE CA.: 2X1,4X1,0 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1400 mm<br/>table load: 3,0 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>max. torque on the faceplate: 6000 nm<br/>table pass: 200 mm<br/>welding current: 700 ampere<br/>total power requirement: 1,1 + 2,2 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1400 MM
TABLE LOAD: 3,0 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
MAX. TORQUE ON THE FACEPLATE: 6000 NM
TABLE PASS: 200 MM
WELDING CURRENT: 700 AMPERE
TOTAL POWER REQUIREMENT: 1,1 + 2,2 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m6 - m30 mm<br/>: 58 - 205 u/min.<br/>working area: 320 - 1500 mm<br/>engine output: 0,85 kw<br/>weight: 36 kg<br/><br/><br/><br/><br/> THREAD DIA.: M6 - M30 MM
: 58 - 205 U/MIN.
WORKING AREA: 320 - 1500 MM
ENGINE OUTPUT: 0,85 KW
WEIGHT: 36 KG




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1600 mm<br/>table load: 8 t<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,05- 0,5 u/min<br/>table height adjustment:  von 1210 bis 2238 mm<br/>max. torque on the faceplate: 1200 nm<br/>welding current: 700 ampere<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 1600 MM
TABLE LOAD: 8 T
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,05- 0,5 U/MIN
TABLE HEIGHT ADJUSTMENT: VON 1210 BIS 2238 MM
MAX. TORQUE ON THE FACEPLATE: 1200 NM
WELDING CURRENT: 700 AMPERE
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1000 mm<br/>table load: 1,0 t<br/>swivelling range: 0 - 90 grad<br/>turning speeds: 0,1 - 1,25 u/min<br/>max. torque on the faceplate: 900 nm<br/>table pass: 200 mm<br/>welding current: 500 ampere<br/>total power requirement: 0,37 + 0,75 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1000 MM
TABLE LOAD: 1,0 T
SWIVELLING RANGE: 0 - 90 GRAD
TURNING SPEEDS: 0,1 - 1,25 U/MIN
MAX. TORQUE ON THE FACEPLATE: 900 NM
TABLE PASS: 200 MM
WELDING CURRENT: 500 AMPERE
TOTAL POWER REQUIREMENT: 0,37 + 0,75 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 5 t<br/>workpiece diameter: 250 - 2500 mm<br/>drum diameter: 250 x 100 mm<br/>feed: 100 - 1000 mm/min<br/>total power requirement: 0,75 kw<br/><br/><br/><br/><br/> WEIGHT MAX.: 5 T
WORKPIECE DIAMETER: 250 - 2500 MM
DRUM DIAMETER: 250 X 100 MM
FEED: 100 - 1000 MM/MIN
TOTAL POWER REQUIREMENT: 0,75 KW




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 2000 mm<br/>table load: 10,0 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>max. torque on the faceplate: 20000 nm<br/>table pass: 200 mm<br/>welding current: 1000 ampere<br/>total power requirement: 3,0 + 4,0 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 2000 MM
TABLE LOAD: 10,0 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
MAX. TORQUE ON THE FACEPLATE: 20000 NM
TABLE PASS: 200 MM
WELDING CURRENT: 1000 AMPERE
TOTAL POWER REQUIREMENT: 3,0 + 4,0 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1100 mm<br/>table load: 2000 kg<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,1 - 1,0 u/min<br/>height adjustment: 1100 - 1550 mm<br/>max. torque on the faceplate: 4000 nm<br/>engine output: 1,1 / 0,75 kw<br/>welding current: 500 ampere<br/>- manual height adjustment.<br/>  - self-locking gearbox, therefore hardly any pre and after-run at eccentric<br/>    load.<br/>  - electronic components from schneider, siemens and delta.<br/>  - frequency-controlled, stepless speed of the turntable.<br/>  - high stability due to the robust construction.<br/>  - ce certificate.<br/><br/>the d-hbe series comes as a standard version with a cable remote control and a <br/>footswitch.<br/><br/>welding power transmission for max.500ampere.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1100 MM
TABLE LOAD: 2000 KG
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,1 - 1,0 U/MIN
HEIGHT ADJUSTMENT: 1100 - 1550 MM
MAX. TORQUE ON THE FACEPLATE: 4000 NM
ENGINE OUTPUT: 1,1 / 0,75 KW
WELDING CURRENT: 500 AMPERE
- MANUAL HEIGHT ADJUSTMENT.
- SELF-LOCKING GEARBOX, THEREFORE HARDLY ANY PRE AND AFTER-RUN AT ECCENTRIC
LOAD.
- ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
- FREQUENCY-CONTROLLED, STEPLESS SPEED OF THE TURNTABLE.
- HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
- CE CERTIFICATE.

THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND A
FOOTSWITCH.

WELDING POWER TRANSMISSION FOR MAX.500AMPERE.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1200 mm<br/>table load: 1,2 t<br/>swivelling range: 0 - 120 grad<br/>turning speeds: 0,06-0,6 u/min<br/>max. torque on the faceplate: 2400 nm<br/>table pass: 200 mm<br/>welding current: 500 ampere<br/>total power requirement: 0,75 + 1,1 kw<br/>weight of the machine ca.: 1,0 t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1200 MM
TABLE LOAD: 1,2 T
SWIVELLING RANGE: 0 - 120 GRAD
TURNING SPEEDS: 0,06-0,6 U/MIN
MAX. TORQUE ON THE FACEPLATE: 2400 NM
TABLE PASS: 200 MM
WELDING CURRENT: 500 AMPERE
TOTAL POWER REQUIREMENT: 0,75 + 1,1 KW
WEIGHT OF THE MACHINE CA.: 1,0 T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: 12 mm<br/>: 375 u/min.<br/>working area: 180 - 2000 mm<br/>engine output: 0,7 kw<br/>weight: 28 kg<br/><br/><br/><br/><br/> THREAD DIA.: 12 MM
: 375 U/MIN.
WORKING AREA: 180 - 2000 MM
ENGINE OUTPUT: 0,7 KW
WEIGHT: 28 KG




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 900 mm<br/>table load: 1,0 t<br/>swivelling range: 135 grad<br/>turning speeds: 0,12 - 1,2 u/min<br/>: 820 mm<br/>welding current: 500 ampere<br/>total power requirement: 0,75 + 0,55 kw<br/>weight of the machine ca.: 1,1 t<br/>dimensions of the machine ca.: 1,5 x 1,0 x 0,9 m<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>  load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 900 MM
TABLE LOAD: 1,0 T
SWIVELLING RANGE: 135 GRAD
TURNING SPEEDS: 0,12 - 1,2 U/MIN
: 820 MM
WELDING CURRENT: 500 AMPERE
TOTAL POWER REQUIREMENT: 0,75 + 0,55 KW
WEIGHT OF THE MACHINE CA.: 1,1 T
DIMENSIONS OF THE MACHINE CA.: 1,5 X 1,0 X 0,9 M
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m3 - m8 mm<br/>: 750 u/min.<br/>working area: 180 - 1000 mm<br/>engine output: 0,7 kw<br/><br/><br/><br/><br/> THREAD DIA.: M3 - M8 MM
: 750 U/MIN.
WORKING AREA: 180 - 1000 MM
ENGINE OUTPUT: 0,7 KW




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1300 mm<br/>table load: 3000 kg<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>height adjustment: 1200 - 1800 mm<br/>max. torque on the faceplate: 6000 nm<br/>engine output: 1,1 / 1,1 kw<br/>welding current: 700 ampere<br/>- manual height adjustment.<br/>  - self-locking gearbox, therefore hardly any pre and after-run at eccentric<br/>    load.<br/>  - electronic components from schneider, siemens and delta.<br/>  - frequency-controlled, stepless speed of the turntable.<br/>  - high stability due to the robust construction.<br/>  - ce certificate.<br/><br/>the d-hbe series comes as a standard version with a cable remote control and a <br/>footswitch.<br/><br/>welding power transmission for max.500ampere.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1300 MM
TABLE LOAD: 3000 KG
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
HEIGHT ADJUSTMENT: 1200 - 1800 MM
MAX. TORQUE ON THE FACEPLATE: 6000 NM
ENGINE OUTPUT: 1,1 / 1,1 KW
WELDING CURRENT: 700 AMPERE
- MANUAL HEIGHT ADJUSTMENT.
- SELF-LOCKING GEARBOX, THEREFORE HARDLY ANY PRE AND AFTER-RUN AT ECCENTRIC
LOAD.
- ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
- FREQUENCY-CONTROLLED, STEPLESS SPEED OF THE TURNTABLE.
- HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
- CE CERTIFICATE.

THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND A
FOOTSWITCH.

WELDING POWER TRANSMISSION FOR MAX.500AMPERE.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 3000 kg<br/>workpiece diameter: 20 - 1500 mm<br/>drum diameter: 200 x 50 mm<br/>connected load frequency: 230 v<br/>dimensions: 0,8 x 0,37 x 0,36 m<br/>total power requirement: 0,2 kw<br/><br/><br/><br/><br/> WEIGHT MAX.: 3000 KG
WORKPIECE DIAMETER: 20 - 1500 MM
DRUM DIAMETER: 200 X 50 MM
CONNECTED LOAD FREQUENCY: 230 V
DIMENSIONS: 0,8 X 0,37 X 0,36 M
TOTAL POWER REQUIREMENT: 0,2 KW




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 8000 kg<br/>workpiece diameter: 160 - 4750 mm<br/>drum diameter: 300 x 100 mm<br/>feed: 100 - 1000 mm/min<br/>total power requirement: 1,1 kw<br/>dimensions of the machine ca.: 2 stk. 2,85x0,6x0,8 m<br/><br/><br/><br/><br/> WEIGHT MAX.: 8000 KG
WORKPIECE DIAMETER: 160 - 4750 MM
DRUM DIAMETER: 300 X 100 MM
FEED: 100 - 1000 MM/MIN
TOTAL POWER REQUIREMENT: 1,1 KW
DIMENSIONS OF THE MACHINE CA.: 2 STK. 2,85X0,6X0,8 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 700 mm<br/>table load: 0,5 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,2 - 3 u/min<br/>height adjustment: 400 - 900 mm<br/>boring diameter: 100 mm<br/>welding current: max. 500 ampere<br/>total power requirement: 0,75 kw<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 700 MM
TABLE LOAD: 0,5 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,2 - 3 U/MIN
HEIGHT ADJUSTMENT: 400 - 900 MM
BORING DIAMETER: 100 MM
WELDING CURRENT: MAX. 500 AMPERE
TOTAL POWER REQUIREMENT: 0,75 KW
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1400 mm<br/>table load: 4 t<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>: 8000 nm<br/>0: 1,1 / 1,5 kw<br/>welding current: 700 ampere<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>  load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1400 MM
TABLE LOAD: 4 T
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
: 8000 NM
0: 1,1 / 1,5 KW
WELDING CURRENT: 700 AMPERE
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1800 mm<br/>table load: 8 t<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,02 - 0,2 u/min<br/>: 16000 nm<br/>0: 1,1 / 2,2 kw<br/>welding current: 1000 ampere<br/>including remote control and welding current transmission.<br/><br/><br/><br/> TABLE DIAMETER: 1800 MM
TABLE LOAD: 8 T
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,02 - 0,2 U/MIN
: 16000 NM
0: 1,1 / 2,2 KW
WELDING CURRENT: 1000 AMPERE
INCLUDING REMOTE CONTROL AND WELDING CURRENT TRANSMISSION.



Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m20 - m52 mm<br/>: 38 / 136 u/min.<br/>working area: 320 - 1500 mm<br/>engine output: 1,3 kw<br/>weight: 42 kg<br/><br/><br/><br/><br/> THREAD DIA.: M20 - M52 MM
: 38 / 136 U/MIN.
WORKING AREA: 320 - 1500 MM
ENGINE OUTPUT: 1,3 KW
WEIGHT: 42 KG




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 500 mm<br/>height: 110 mm<br/>daylight: 240 mm<br/>external diameter: futter 320 mm<br/>external diameter: spannhebel 700 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 500 MM
HEIGHT: 110 MM
DAYLIGHT: 240 MM
EXTERNAL DIAMETER: FUTTER 320 MM
EXTERNAL DIAMETER: SPANNHEBEL 700 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 200 mm<br/>height: 67,5 mm<br/>daylight: 65 mm<br/>external diameter: futter 100 mm<br/>external diameter: spannhebel 360 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 200 MM
HEIGHT: 67,5 MM
DAYLIGHT: 65 MM
EXTERNAL DIAMETER: FUTTER 100 MM
EXTERNAL DIAMETER: SPANNHEBEL 360 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1600 mm<br/>table load: 6 t<br/>swivelling range: 0 - 130 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>: 12000 nm<br/>0: 1,5 / 2,2 kw<br/>welding current: 700 ampere<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>  load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1600 MM
TABLE LOAD: 6 T
SWIVELLING RANGE: 0 - 130 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
: 12000 NM
0: 1,5 / 2,2 KW
WELDING CURRENT: 700 AMPERE
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 1000 kg<br/>clamping width: 2000 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> WEIGHT MAX.: 1000 KG
CLAMPING WIDTH: 2000 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 10 t<br/>workpiece diameter: 100 - 3200 mm<br/>drum diameter: 300 x 120 mm<br/>feed: 100 - 1000 mm/min<br/>total power requirement: 2 x 0,55 kw<br/><br/><br/><br/><br/> WEIGHT MAX.: 10 T
WORKPIECE DIAMETER: 100 - 3200 MM
DRUM DIAMETER: 300 X 120 MM
FEED: 100 - 1000 MM/MIN
TOTAL POWER REQUIREMENT: 2 X 0,55 KW




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 400 mm<br/>height: 95 mm<br/>daylight: 170 mm<br/>external diameter: futter 250 mm<br/>external diameter: spannhebel 600 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 400 MM
HEIGHT: 95 MM
DAYLIGHT: 170 MM
EXTERNAL DIAMETER: FUTTER 250 MM
EXTERNAL DIAMETER: SPANNHEBEL 600 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-weight max.: 10 t<br/>workpiece diameter: 320 - 3200 mm<br/>drum diameter: 300 x 120 mm<br/>feed: 100 - 1000 mm/min<br/>total power requirement: 1,1 kw<br/><br/><br/><br/><br/> WEIGHT MAX.: 10 T
WORKPIECE DIAMETER: 320 - 3200 MM
DRUM DIAMETER: 300 X 120 MM
FEED: 100 - 1000 MM/MIN
TOTAL POWER REQUIREMENT: 1,1 KW




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m3 - m12 mm<br/>: 400 u/min.<br/>: 28 nm<br/>air pressure: 6 - 8 bar<br/>working area: 150 - 1900 mm<br/>weight of the machine ca.: 12 kg<br/>pneumatic tapping machines for m3 - m12 thread, angle adjustable.<br/>6 pcs. keyless chuck with clutch.<br/>optional:<br/>working table with t-slots: 750x600x650mm 990x700x800mm or.<br/>magnetic base.<br/>available up to max. m16, m22 and m33.<br/><br/><br/><br/><br/> THREAD DIA.: M3 - M12 MM
: 400 U/MIN.
: 28 NM
AIR PRESSURE: 6 - 8 BAR
WORKING AREA: 150 - 1900 MM
WEIGHT OF THE MACHINE CA.: 12 KG
PNEUMATIC TAPPING MACHINES FOR M3 - M12 THREAD, ANGLE ADJUSTABLE.
6 PCS. KEYLESS CHUCK WITH CLUTCH.
OPTIONAL:
WORKING TABLE WITH T-SLOTS: 750X600X650MM 990X700X800MM OR.
MAGNETIC BASE.
AVAILABLE UP TO MAX. M16, M22 AND M33.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: 12 mm<br/>: 375 u/min.<br/>working area: 180 - 1000 mm<br/>engine output: 0,7 kw<br/>weight: 21,5 kg<br/><br/><br/><br/><br/> THREAD DIA.: 12 MM
: 375 U/MIN.
WORKING AREA: 180 - 1000 MM
ENGINE OUTPUT: 0,7 KW
WEIGHT: 21,5 KG




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m5 - m16 mm<br/>: 250 u/min.<br/>: 48 nm<br/>air pressure: 6 - 8 bar<br/>working area: 150 - 1900 mm<br/>weight of the machine ca.: 34 kg<br/><br/><br/><br/><br/> THREAD DIA.: M5 - M16 MM
: 250 U/MIN.
: 48 NM
AIR PRESSURE: 6 - 8 BAR
WORKING AREA: 150 - 1900 MM
WEIGHT OF THE MACHINE CA.: 34 KG




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 700 mm<br/>table load: 0,6 t<br/>swivelling range: 0 - 90 grad<br/>turning speeds: 0,2 - 2,0 u/min<br/>: 900 nm<br/>total power requirement: 0,37 / 0,37 kw<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>    load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 700 MM
TABLE LOAD: 0,6 T
SWIVELLING RANGE: 0 - 90 GRAD
TURNING SPEEDS: 0,2 - 2,0 U/MIN
: 900 NM
TOTAL POWER REQUIREMENT: 0,37 / 0,37 KW
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-clamping range of chuck: max. 300 mm<br/>height: 67,5 mm<br/>daylight: 100 mm<br/>external diameter: futter 150 mm<br/>external diameter: spannhebel 480 mm<br/>characteristics:<br/>? self-centering.<br/>? reversible jaws.<br/>? fixed clamping levers allow fast workpiece changes.<br/>? low weight and flat design minimize the center of gravity.<br/><br/>the d-d quick chuck enables a quick product change and is suitable<br/>excellent with frequent component changes. you do not need a loose one<br/>quick release wrench, as the levers are integrated into the quick release chuck.<br/><br/><br/><br/><br/> CLAMPING RANGE OF CHUCK: MAX. 300 MM
HEIGHT: 67,5 MM
DAYLIGHT: 100 MM
EXTERNAL DIAMETER: FUTTER 150 MM
EXTERNAL DIAMETER: SPANNHEBEL 480 MM
CHARACTERISTICS:
? SELF-CENTERING.
? REVERSIBLE JAWS.
? FIXED CLAMPING LEVERS ALLOW FAST WORKPIECE CHANGES.
? LOW WEIGHT AND FLAT DESIGN MINIMIZE THE CENTER OF GRAVITY.

THE D-D QUICK CHUCK ENABLES A QUICK PRODUCT CHANGE AND IS SUITABLE
EXCELLENT WITH FREQUENT COMPONENT CHANGES. YOU DO NOT NEED A LOOSE ONE
QUICK RELEASE WRENCH, AS THE LEVERS ARE INTEGRATED INTO THE QUICK RELEASE CHUCK.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m3 - m16 mm<br/>: max. 187 u/min.<br/>working area: 180 - 2000 mm<br/>engine output: 0,7 kw<br/>weight: 22 kg<br/>electric tapping machines for m3 - m16 thread,<br/>angle adjustable.<br/>9 pcs. quick-change chuck with slip clutch.<br/>adjustable via display:<br/>variable speed, adjustable depth, material selection, choice of<br/>main direction of rotation, thread selection.<br/>optional:<br/>clamping table with t-slots: 990x700x800mm.<br/>magnetic base.<br/>also available: m14 to m24 and m27 to m33.<br/><br/><br/><br/><br/><br/> THREAD DIA.: M3 - M16 MM
: MAX. 187 U/MIN.
WORKING AREA: 180 - 2000 MM
ENGINE OUTPUT: 0,7 KW
WEIGHT: 22 KG
ELECTRIC TAPPING MACHINES FOR M3 - M16 THREAD,
ANGLE ADJUSTABLE.
9 PCS. QUICK-CHANGE CHUCK WITH SLIP CLUTCH.
ADJUSTABLE VIA DISPLAY:
VARIABLE SPEED, ADJUSTABLE DEPTH, MATERIAL SELECTION, CHOICE OF
MAIN DIRECTION OF ROTATION, THREAD SELECTION.
OPTIONAL:
CLAMPING TABLE WITH T-SLOTS: 990X700X800MM.
MAGNETIC BASE.
ALSO AVAILABLE: M14 TO M24 AND M27 TO M33.





Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table length: 990 mm<br/>table width: 700 mm<br/>table load:  t<br/>table height: 800 mm<br/>weight: 140 kg<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,15 t<br/>dimensions of the machine ca.:  m<br/>dimensions: 1,0 x 0,7 x 0,8 m<br/><br/><br/><br/><br/> TABLE LENGTH: 990 MM
TABLE WIDTH: 700 MM
TABLE LOAD: T
TABLE HEIGHT: 800 MM
WEIGHT: 140 KG
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,15 T
DIMENSIONS OF THE MACHINE CA.: M
DIMENSIONS: 1,0 X 0,7 X 0,8 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1500 mm<br/>table load: 5,0 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,05 - 0,5 u/min<br/>max. torque on the faceplate: 10000 nm<br/>table pass: 200 mm<br/>welding current: 700 ampere<br/>total power requirement: 1,5 + 3,0 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1500 MM
TABLE LOAD: 5,0 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,05 - 0,5 U/MIN
MAX. TORQUE ON THE FACEPLATE: 10000 NM
TABLE PASS: 200 MM
WELDING CURRENT: 700 AMPERE
TOTAL POWER REQUIREMENT: 1,5 + 3,0 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 1100 mm<br/>table load: 2 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,1 - 1,0 u/min<br/>: 4000 nm<br/>0: 1,1 / 0,75 kw<br/>welding current: 500 ampere<br/>? self-locking gear, therefore no forward and backward at eccentric<br/>    load.<br/>? electronic components from schneider, siemens and delta.<br/>? frequency-controlled stepless speed of the turntable.<br/>? high stability due to the robust construction.<br/>? welding power transmission<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-hbe series comes as a standard version with a cable remote control and<br/>  delivered with a footswitch.<br/><br/><br/><br/><br/> TABLE DIAMETER: 1100 MM
TABLE LOAD: 2 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,1 - 1,0 U/MIN
: 4000 NM
0: 1,1 / 0,75 KW
WELDING CURRENT: 500 AMPERE
? SELF-LOCKING GEAR, THEREFORE NO FORWARD AND BACKWARD AT ECCENTRIC
LOAD.
? ELECTRONIC COMPONENTS FROM SCHNEIDER, SIEMENS AND DELTA.
? FREQUENCY-CONTROLLED STEPLESS SPEED OF THE TURNTABLE.
? HIGH STABILITY DUE TO THE ROBUST CONSTRUCTION.
? WELDING POWER TRANSMISSION
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-HBE SERIES COMES AS A STANDARD VERSION WITH A CABLE REMOTE CONTROL AND
DELIVERED WITH A FOOTSWITCH.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 2500 mm<br/>table load: 20,0 t<br/>swivelling range: 0 - 135 grad<br/>turning speeds: 0,04 - 0,4 u/min<br/>max. torque on the faceplate: 40000 nm<br/>table pass: 200 mm<br/>welding current: 1000 ampere<br/>total power requirement: 5,5 + 11,0 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 2500 MM
TABLE LOAD: 20,0 T
SWIVELLING RANGE: 0 - 135 GRAD
TURNING SPEEDS: 0,04 - 0,4 U/MIN
MAX. TORQUE ON THE FACEPLATE: 40000 NM
TABLE PASS: 200 MM
WELDING CURRENT: 1000 AMPERE
TOTAL POWER REQUIREMENT: 5,5 + 11,0 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-table diameter: 600 mm<br/>table load: 0,6 t<br/>swivelling range: 0 - 90 grad<br/>turning speeds: 0,1 - 1,8 u/min<br/>max. torque on the faceplate: 450 nm<br/>table pass: 80 mm<br/>welding current: 500 ampere<br/>total power requirement: 0,18 + 0,18 kw<br/>weight of the machine ca.:  t<br/>elding table with large through bore<br/>? self-locking gearbox, no pre- or after-run with eccentric load.<br/>? electronic components from siemens and schneider.<br/>? frequency-controlled, very accurate speed control.<br/>? turntable with large through hole and t-slots.<br/>? high stability through a clever construction.<br/>? ce certificate.<br/>? very good price / quality ratio.<br/>? the d-tlp series comes with remote control and foot pedal (left / right).<br/><br/>no original pictures. design but identical.<br/><br/><br/><br/><br/> TABLE DIAMETER: 600 MM
TABLE LOAD: 0,6 T
SWIVELLING RANGE: 0 - 90 GRAD
TURNING SPEEDS: 0,1 - 1,8 U/MIN
MAX. TORQUE ON THE FACEPLATE: 450 NM
TABLE PASS: 80 MM
WELDING CURRENT: 500 AMPERE
TOTAL POWER REQUIREMENT: 0,18 + 0,18 KW
WEIGHT OF THE MACHINE CA.: T
ELDING TABLE WITH LARGE THROUGH BORE
? SELF-LOCKING GEARBOX, NO PRE- OR AFTER-RUN WITH ECCENTRIC LOAD.
? ELECTRONIC COMPONENTS FROM SIEMENS AND SCHNEIDER.
? FREQUENCY-CONTROLLED, VERY ACCURATE SPEED CONTROL.
? TURNTABLE WITH LARGE THROUGH HOLE AND T-SLOTS.
? HIGH STABILITY THROUGH A CLEVER CONSTRUCTION.
? CE CERTIFICATE.
? VERY GOOD PRICE / QUALITY RATIO.
? THE D-TLP SERIES COMES WITH REMOTE CONTROL AND FOOT PEDAL (LEFT / RIGHT).

NO ORIGINAL PICTURES. DESIGN BUT IDENTICAL.




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-thread dia.: m3 - m16 mm<br/>: max. 187 u/min.<br/>working area: 180 - 1000 mm<br/>engine output: 0,7 kw<br/>weight: 22 kg<br/><br/><br/><br/><br/> THREAD DIA.: M3 - M16 MM
: MAX. 187 U/MIN.
WORKING AREA: 180 - 1000 MM
ENGINE OUTPUT: 0,7 KW
WEIGHT: 22 KG




Vendedor: WMT GmbH & Co. KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DUMETA types: