96 ofertas

Año de construcción: usado
Ubicación: Land-paper size : 210 x 210 mm – 370 x 650 mm
paper weight : 110-350 gsm
speed : 1560 sheets/hour
 PAPER SIZE : 210 X 210 MM – 370 X 650 MM PAPER WEIGHT : 110-350 GSM SPEED : 1560 SHEETS/HOUR
Vendedor: SOLUTION GRAPHIQUE FRANCE
Año de construcción: usado
Ubicación: Land-number of sanding units: 2 st.<br/>sanding width: 190 mm<br/>sanding height max.: 2-180 mm<br/>lÖwer-doppelseitige schleifmaschine dsm 2000<br/>doppelseitige einzelholzschleifmaschine zum schleifen von<br/>massivholz wie z.b. fensterhölzern etc. stabile top-aus-<br/>führung mit langen gußtischen, bürst- und finisheinrichtung<br/>und transportbandvorschub. geeignet für hohe dauerbelastung<br/>auch bei höheren spanabnahmen.<br/><br/>- versetzt angeordnete schleif- und finishaggregate oben und unten<br/>- direkt angetriebene gummierte schleifrollen für schlupffreie kraftübertragung<br/>- kombischliff über rolle und schuh für hohe spanabnahmen bei gleichzeitig ebener eingriffszone<br/>- wartungs- und verschleißfreie cermet-beschichtete schleifschuhe mit sehr guter wärmeleitfähigkeit und absoluter<br/>  maßhaltigkeit<br/>- fremdkühlung der schleifzonen für einen kühleren schliff und höhere schleifbandstandzeiten<br/>- zwangsgeführte pneumatisch gesteuerte schleifbandoszillation<br/>- effektive schleifstaubabsaugung direkt an den schleifwalzen flugstaubabsaugung an den spannrollen<br/>- integrierte bürst- und finisheinrichtung mit großer schleifstaubabsaugung<br/>- motorische schleifdickeneinstellung über präzisionsgewindespindeln und großdimensionierten linear- kugel-<br/>  lagersets auf gehärteten und geschliffenen präzisions-<br/>  wellen mit staub- und schmutzsicherung<br/>- einstellung der spanabnahme unten über präzisionsgewindespindel mit maßanzeige über skalenring (auflösung 0,1mm)<br/>- schleifbandspannung über pneumatikzylinder mit konstantem spanndruck<br/>- schleifbandwechsel mit pneumatischer bandentspannung in sekundenschnelle<br/>- einstellmöglichkeit des schleifbandlaufes bei bandwechsel<br/>- elektropneumatische druckluftüberwachung<br/>- einlaufsicherung über kontaktrolle bei zu dicken werkstücken<br/>- werkstücktransport über kalibrierte rutsch- und haftfeste transportbänder über schwere, 1000mm lange gußtische mit feinstgehobelter oberfläche und gefederten andruckrollen mit feineinstellung<br/>- kardanwellenantrieb für ruckfreien und gleichmäßigen werkstücktransport<br/>- vorschubgetriebemotor mit drei unterschiedlichen vorchubgeschwindigkeiten zur schnellen anpassung an verschiedene holzarten<br/>- alle motoren ekektrisch abgesichert<br/>- ergonomisch angeordnete bedienelemente an der werkstückeinlaufseite<br/>- automatische werkstückstärkenabtastung (kein vorheriges messen notwendig)<br/>- digitale stärkenanzeige (auflösung 0,1mm) mit modernem magnetbandsystem<br/><br/>technische daten:<br/>- schleifbandgeschwindigkeit: 22 m/s<br/>- schleifbandlänge: 1800mm<br/>- schleifbandbreite:200mm<br/>- arbeitsbreite: 190mm<br/>- schleifdicke: 2-180mm<br/>- zwei bremsmotoren für antrieb: 5,5 kw<br/>- vorschubmotor: 1,0 kw<br/>- vorschubgeschwindigkeit: 6, 11 und 16 m/min.<br/>- automatische höhenverstellung: 0,37 kw<br/>- zwei bürstenaggregate<br/>  mit fibrebürsten d 120 x 200mm à 0,37 kw<br/>- absaugstutzen: 2 x 120mm und 2 x 150mm<br/>- pneumatikanschluß 6 bar<br/>- arbeitshöhe: 850mm<br/>- länge: 2105mm<br/>- länge mit bedienteil 2490mm<br/>- breite: 880mm<br/>- höhe: 1910mm<br/>- gewicht: ca. 1500 kg<br/>- betriebsspannung: 400 volt, 50 hz, 3p<br/>- ce-ausführung<br/>-------------------------------------------------------------------------<br/>grundpreis der maschine auf anfrage!<br/>-------------------------------------------------------------------------<br/><br/><br/>sonderzubehör:                                                               <br/><br/>stufenloser vorschub 4-20 m/min.<br/>zur geschwindigkeitsanpassung an vormaschine<br/>preis netto in euro: 1.150,00<br/><br/>werkstückabblasung<br/>- mittels düsen von oben und unten am maschinenauslauf<br/>  angeordnet, pneumatisch gesteuert<br/>preis netto in euro: 600,00<br/><br/>schleifbandausblasung<br/>- über düsen direkt an den radien der spannrollen innerhalb<br/>  der absaugung angeordnet, separat zuschaltbar<br/>preis netto in euro: 540,00<br/><br/>querverschiebung der kompletten maschine<br/>- einstellbar 50-100mm oszillierend zur gleichmäßigeren<br/>  ausnutzung von schleifbändern, finishwerkzeugen und<br/>  transportsystem, getriebemotor 0,37kw<br/>(nicht verfügbar in verbindung mit disc/softdisc aggregat)<br/>preis netto in euro: 3.670,00<br/><br/>transportfreilauf-einrichtung<br/>- bei verkettung mit wenig abstand zur vormaschine<br/>preis netto in euro: 730,00<br/><br/>externer startimpuls der maschine<br/>- über einen taster inkl. ansteuermöglichkeit über externe<br/>  sps-steuerung (bei verkettung in fertigungsstraße)<br/>preis netto in euro: 680,00<br/><br/>duplo-steuerung<br/>- zusätzliches bedienteil zur anbringung an eine<br/>  vorgeschaltete maschine mit folgenden funktionen:<br/>  - starttaster<br/>  - not-aus<br/>  - höhenverstellung auf, ab und 1/10 ab<br/>  - digitale stärkenanzeige<br/>  - geschirmtes spezialkabel, (max. 20m)<br/>preis netto in euro: 2.990,00<br/><br/><br/>(technische angaben laut hersteller - ohe gewähr!)<br/>alle angegebenen preis netto. zzgl. gesetzl. mwst.<br/><br/><br/><br/><br/> NUMBER OF SANDING UNITS: 2 ST.
SANDING WIDTH: 190 MM
SANDING HEIGHT MAX.: 2-180 MM
LÖWER-DOPPELSEITIGE SCHLEIFMASCHINE DSM 2000
DOPPELSEITIGE EINZELHOLZSCHLEIFMASCHINE ZUM SCHLEIFEN VON
MASSIVHOLZ WIE Z.B. FENSTERHöLZERN ETC. STABILE TOP-AUS-
FüHRUNG MIT LANGEN GUßTISCHEN, BüRST- UND FINISHEINRICHTUNG
UND TRANSPORTBANDVORSCHUB. GEEIGNET FüR HOHE DAUERBELASTUNG
AUCH BEI HöHEREN SPANABNAHMEN.

- VERSETZT ANGEORDNETE SCHLEIF- UND FINISHAGGREGATE OBEN UND UNTEN
- DIREKT ANGETRIEBENE GUMMIERTE SCHLEIFROLLEN FüR SCHLUPFFREIE KRAFTüBERTRAGUNG
- KOMBISCHLIFF üBER ROLLE UND SCHUH FüR HOHE SPANABNAHMEN BEI GLEICHZEITIG EBENER EINGRIFFSZONE
- WARTUNGS- UND VERSCHLEIßFREIE CERMET-BESCHICHTETE SCHLEIFSCHUHE MIT SEHR GUTER WäRMELEITFäHIGKEIT UND ABSOLUTER
MAßHALTIGKEIT
- FREMDKüHLUNG DER SCHLEIFZONEN FüR EINEN KüHLEREN SCHLIFF UND HöHERE SCHLEIFBANDSTANDZEITEN
- ZWANGSGEFüHRTE PNEUMATISCH GESTEUERTE SCHLEIFBANDOSZILLATION
- EFFEKTIVE SCHLEIFSTAUBABSAUGUNG DIREKT AN DEN SCHLEIFWALZEN FLUGSTAUBABSAUGUNG AN DEN SPANNROLLEN
- INTEGRIERTE BüRST- UND FINISHEINRICHTUNG MIT GROßER SCHLEIFSTAUBABSAUGUNG
- MOTORISCHE SCHLEIFDICKENEINSTELLUNG üBER PRäZISIONSGEWINDESPINDELN UND GROßDIMENSIONIERTEN LINEAR- KUGEL-
LAGERSETS AUF GEHäRTETEN UND GESCHLIFFENEN PRäZISIONS-
WELLEN MIT STAUB- UND SCHMUTZSICHERUNG
- EINSTELLUNG DER SPANABNAHME UNTEN üBER PRäZISIONSGEWINDESPINDEL MIT MAßANZEIGE üBER SKALENRING (AUFLöSUNG 0,1MM)
- SCHLEIFBANDSPANNUNG üBER PNEUMATIKZYLINDER MIT KONSTANTEM SPANNDRUCK
- SCHLEIFBANDWECHSEL MIT PNEUMATISCHER BANDENTSPANNUNG IN SEKUNDENSCHNELLE
- EINSTELLMöGLICHKEIT DES SCHLEIFBANDLAUFES BEI BANDWECHSEL
- ELEKTROPNEUMATISCHE DRUCKLUFTüBERWACHUNG
- EINLAUFSICHERUNG üBER KONTAKTROLLE BEI ZU DICKEN WERKSTüCKEN
- WERKSTüCKTRANSPORT üBER KALIBRIERTE RUTSCH- UND HAFTFESTE TRANSPORTBäNDER üBER SCHWERE, 1000MM LANGE GUßTISCHE MIT FEINSTGEHOBELTER OBERFLäCHE UND GEFEDERTEN ANDRUCKROLLEN MIT FEINEINSTELLUNG
- KARDANWELLENANTRIEB FüR RUCKFREIEN UND GLEICHMäßIGEN WERKSTüCKTRANSPORT
- VORSCHUBGETRIEBEMOTOR MIT DREI UNTERSCHIEDLICHEN VORCHUBGESCHWINDIGKEITEN ZUR SCHNELLEN ANPASSUNG AN VERSCHIEDENE HOLZARTEN
- ALLE MOTOREN EKEKTRISCH ABGESICHERT
- ERGONOMISCH ANGEORDNETE BEDIENELEMENTE AN DER WERKSTüCKEINLAUFSEITE
- AUTOMATISCHE WERKSTüCKSTäRKENABTASTUNG (KEIN VORHERIGES MESSEN NOTWENDIG)
- DIGITALE STäRKENANZEIGE (AUFLöSUNG 0,1MM) MIT MODERNEM MAGNETBANDSYSTEM

TECHNISCHE DATEN:
- SCHLEIFBANDGESCHWINDIGKEIT: 22 M/S
- SCHLEIFBANDLäNGE: 1800MM
- SCHLEIFBANDBREITE:200MM
- ARBEITSBREITE: 190MM
- SCHLEIFDICKE: 2-180MM
- ZWEI BREMSMOTOREN FüR ANTRIEB: 5,5 KW
- VORSCHUBMOTOR: 1,0 KW
- VORSCHUBGESCHWINDIGKEIT: 6, 11 UND 16 M/MIN.
- AUTOMATISCHE HöHENVERSTELLUNG: 0,37 KW
- ZWEI BüRSTENAGGREGATE
MIT FIBREBüRSTEN D 120 X 200MM à 0,37 KW
- ABSAUGSTUTZEN: 2 X 120MM UND 2 X 150MM
- PNEUMATIKANSCHLUß 6 BAR
- ARBEITSHöHE: 850MM
- LäNGE: 2105MM
- LäNGE MIT BEDIENTEIL 2490MM
- BREITE: 880MM
- HöHE: 1910MM
- GEWICHT: CA. 1500 KG
- BETRIEBSSPANNUNG: 400 VOLT, 50 HZ, 3P
- CE-AUSFüHRUNG
-------------------------------------------------------------------------
GRUNDPREIS DER MASCHINE AUF ANFRAGE!
-------------------------------------------------------------------------


SONDERZUBEHöR:

STUFENLOSER VORSCHUB 4-20 M/MIN.
ZUR GESCHWINDIGKEITSANPASSUNG AN VORMASCHINE
PREIS NETTO IN EURO: 1.150,00

WERKSTüCKABBLASUNG
- MITTELS DüSEN VON OBEN UND UNTEN AM MASCHINENAUSLAUF
ANGEORDNET, PNEUMATISCH GESTEUERT
PREIS NETTO IN EURO: 600,00

SCHLEIFBANDAUSBLASUNG
- üBER DüSEN DIREKT AN DEN RADIEN DER SPANNROLLEN INNERHALB
DER ABSAUGUNG ANGEORDNET, SEPARAT ZUSCHALTBAR
PREIS NETTO IN EURO: 540,00

QUERVERSCHIEBUNG DER KOMPLETTEN MASCHINE
- EINSTELLBAR 50-100MM OSZILLIEREND ZUR GLEICHMäßIGEREN
AUSNUTZUNG VON SCHLEIFBäNDERN, FINISHWERKZEUGEN UND
TRANSPORTSYSTEM, GETRIEBEMOTOR 0,37KW
(NICHT VERFüGBAR IN VERBINDUNG MIT DISC/SOFTDISC AGGREGAT)
PREIS NETTO IN EURO: 3.670,00

TRANSPORTFREILAUF-EINRICHTUNG
- BEI VERKETTUNG MIT WENIG ABSTAND ZUR VORMASCHINE
PREIS NETTO IN EURO: 730,00

EXTERNER STARTIMPULS DER MASCHINE
- üBER EINEN TASTER INKL. ANSTEUERMöGLICHKEIT üBER EXTERNE
SPS-STEUERUNG (BEI VERKETTUNG IN FERTIGUNGSSTRAßE)
PREIS NETTO IN EURO: 680,00

DUPLO-STEUERUNG
- ZUSäTZLICHES BEDIENTEIL ZUR ANBRINGUNG AN EINE
VORGESCHALTETE MASCHINE MIT FOLGENDEN FUNKTIONEN:
- STARTTASTER
- NOT-AUS
- HöHENVERSTELLUNG AUF, AB UND 1/10 AB
- DIGITALE STäRKENANZEIGE
- GESCHIRMTES SPEZIALKABEL, (MAX. 20M)
PREIS NETTO IN EURO: 2.990,00


(TECHNISCHE ANGABEN LAUT HERSTELLER - OHE GEWäHR!)
ALLE ANGEGEBENEN PREIS NETTO. ZZGL. GESETZL. MWST.




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-single-clamp binder, paper max. 400 g/m2, miller, touchscreen, size min. 120x120 mm, max. 420x360 mm, thickness 2–50 mm, cover min. 120x240 mm, max. 425x780 mm, gluing system - saddle pur + side eva hotmelt, output up to 200 pc/hour, SINGLE-CLAMP BINDER, PAPER MAX. 400 G/M2, MILLER, TOUCHSCREEN, SIZE MIN. 120X120 MM, MAX. 420X360 MM, THICKNESS 2–50 MM, COVER MIN. 120X240 MM, MAX. 425X780 MM, GLUING SYSTEM - SADDLE PUR + SIDE EVA HOTMELT, OUTPUT UP TO 200 PC/HOUR,
Vendedor: Hagel s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter:1010 mm<br/>turning length:3000 mm<br/>control:fanuc oi tf mit manual guide <br/>max. swing over slide:718 mm<br/>bed width:500 mm<br/>spindle taper:a2-11 <br/>spindle speeds:0-1400 1/min.<br/>spindle bore:130 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:120 mm<br/>tailstock quill stroke:300 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:22 kw<br/>weight of the machine ca.:7600 kg<br/>dimensions of the machine ca.:6325x1800x2230 mm<br/>turret:duplomatic dm tr25 with bmt75 (m. y-achse) <br/>hydr. tailstock quill movement: <br/>servo spindle motor: <br/>c-axis:kontin. mit separatem motor  <br/>y-axis: mm<br/>3-jaw hydraulic chuck:500 <br/>chip conveyor: <br/>auto gear change system: <br/>ce-design: <br/>foot pedal control of tailstock and chuck: <br/>hydraulic unit: <br/>machine work light: <br/>tools:1 satz <br/>coolant system: <br/>european electric: <br/>automatic lubrication system: <br/>electric handwheel: <br/>: <br/><br/>new cnc lathe kraft st 500/3000 with fanuc oi td  made in europe  for more information please see the attached documents TURNING DIAMETER:1010 MM
TURNING LENGTH:3000 MM
CONTROL:FANUC OI TF MIT MANUAL GUIDE
MAX. SWING OVER SLIDE:718 MM
BED WIDTH:500 MM
SPINDLE TAPER:A2-11
SPINDLE SPEEDS:0-1400 1/MIN.
SPINDLE BORE:130 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:120 MM
TAILSTOCK QUILL STROKE:300 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:22 KW
WEIGHT OF THE MACHINE CA.:7600 KG
DIMENSIONS OF THE MACHINE CA.:6325X1800X2230 MM
TURRET:DUPLOMATIC DM TR25 WITH BMT75 (M. Y-ACHSE)
HYDR. TAILSTOCK QUILL MOVEMENT:
SERVO SPINDLE MOTOR:
C-AXIS:KONTIN. MIT SEPARATEM MOTOR
Y-AXIS: MM
3-JAW HYDRAULIC CHUCK:500
CHIP CONVEYOR:
AUTO GEAR CHANGE SYSTEM:
CE-DESIGN:
FOOT PEDAL CONTROL OF TAILSTOCK AND CHUCK:
HYDRAULIC UNIT:
MACHINE WORK LIGHT:
TOOLS:1 SATZ
COOLANT SYSTEM:
EUROPEAN ELECTRIC:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
:

NEW CNC LATHE KRAFT ST 500/3000 WITH FANUC OI TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-doppelschleifbock
iron stand
connection cable with cee-plug
380v - 50 hz DOPPELSCHLEIFBOCK IRON STAND CONNECTION CABLE WITH CEE-PLUG 380V - 50 HZ
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-turning diameter:805 mm<br/>turning length:3000 mm<br/>control:siemens 828d <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 <br/>spindle speeds:0-425 / 425-1700  1/min.<br/>spindle bore:105 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:96 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:17 kw<br/>weight of the machine ca.:6760 kg<br/>dimensions of the machine ca.:5557x2077x2227 mm<br/>automatic tool changer:12-fach, vdi 40, mit y-achse (duplomatic) <br/>european electric: <br/>cnc controller:siemens 828d <br/>ce-design: <br/>c-axis: <br/>tools:1 satz <br/>y-axis: mm<br/>machine work light: <br/>coolant system:6 bar <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>: <br/>tool setter: <br/><br/>new cnc lathe kraft st 400/3000 with fanuc oi mate td  made in europe  for more information please see the attached documents TURNING DIAMETER:805 MM
TURNING LENGTH:3000 MM
CONTROL:SIEMENS 828D
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8
SPINDLE SPEEDS:0-425 / 425-1700 1/MIN.
SPINDLE BORE:105 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:96 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:6760 KG
DIMENSIONS OF THE MACHINE CA.:5557X2077X2227 MM
AUTOMATIC TOOL CHANGER:12-FACH, VDI 40, MIT Y-ACHSE (DUPLOMATIC)
EUROPEAN ELECTRIC:
CNC CONTROLLER:SIEMENS 828D
CE-DESIGN:
C-AXIS:
TOOLS:1 SATZ
Y-AXIS: MM
MACHINE WORK LIGHT:
COOLANT SYSTEM:6 BAR
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
:
TOOL SETTER:

NEW CNC LATHE KRAFT ST 400/3000 WITH FANUC OI MATE TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 23.000 €
Ubicación: Land-v297 duplo 5000 pro dynamic booklet maker (year 2011)
duplo dc10/60 pro collator / lul lift-up unif left / duplo dbm500 booklet maker / duplo dbm500 trimmer / duplo dbm500 ls long belt delivery table / duplo dbm500 kicker / criss-cross jogger / counter: only app. 500000 books.
machine in new condition!
 V297 DUPLO 5000 PRO DYNAMIC BOOKLET MAKER (YEAR 2011) DUPLO DC10/60 PRO COLLATOR / LUL LIFT-UP UNIF LEFT / DUPLO DBM500 BOOKLET MAKER / DUPLO DBM500 TRIMMER / DUPLO DBM500 LS LONG BELT DELIVERY TABLE / DUPLO DBM500 KICKER / CRISS-CROSS JOGGER / COUNTER: ONLY APP. 500000 BOOKS. MACHINE IN NEW CONDITION!
Vendedor: GMD Machinery
Año de construcción: usado
Precio: used machinery auction RESALE 660 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 1600 x 1100 x 1700  mm<br/>description: friedrich see mp 20 copy lathe<br> - machine no.: 3916<br> - operating voltage: 380 v<br> - copy device: duplomatic<br> - distance between centres: 600 mm<br> - centre height: 150 mm<br> WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1100 X 1700 MM
DESCRIPTION: FRIEDRICH SEE MP 20 COPY LATHE
- MACHINE NO.: 3916
- OPERATING VOLTAGE: 380 V
- COPY DEVICE: DUPLOMATIC
- DISTANCE BETWEEN CENTRES: 600 MM
- CENTRE HEIGHT: 150 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-doppelschleifbock make eiber + sauter ds3
year: unknown
grinding approx. ã?250
machine can be visited at any time even under current in use.
ihulil8bw
tax: now open DOPPELSCHLEIFBOCK MAKE EIBER + SAUTER DS3 YEAR: UNKNOWN GRINDING APPROX. &ATILDE;?250 MACHINE CAN BE VISITED AT ANY TIME EVEN UNDER CURRENT IN USE. IHULIL8BW TAX: NOW OPEN
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-stations: 6 <br/>max. speed sets: 1200 /h<br/>max. paper size: 257 x 364 mm<br/>serial no.: 10806000 <br/><br/><br/><br/><br/><br/> STATIONS: 6
MAX. SPEED SETS: 1200 /H
MAX. PAPER SIZE: 257 X 364 MM
SERIAL NO.: 10806000





Vendedor: Steenholdt GmbH
Año de construcción: usado
Ubicación: Land-control: heidenhain manual plus 620
-tool holder: 8facher revolver, duplomatic.
-three jaw chuck êºschunkêº ã¸ 315 mm.
workspace
swing over bed 550 mm
swing over cross beam 350 mm
top width 1600 mm
maximum workpiece weight 1000 mm

work spindle
spindle nose 8
spindle bore 82 mm
spindle taper - metric 90

main drive
17 kw
automatic two speed gearbox 2 levels
spindle speed range 0-3000 rpm
1. level 0-600 rpm
2. level 20-3000 rpm
maximum torque at the spindle:
at the 1st level 1300 nm
at the 2nd stage of 295 nm
x-axis
max.verfahrweg 285 mm
rapid traverse 10'000 mm/min.

z axis
maximum travel distance 1590 mm
rapid traverse 10000 mm / min.

tailstock
quill diameter 90 mm
quill stroke 160 mm
inner cone morse 5 in pinole

dimensions of the machine
l x w x h 3238 x 1920 x 1755 mm
weight of machine 3400 kg
 CONTROL: HEIDENHAIN MANUAL PLUS 620 -TOOL HOLDER: 8FACHER REVOLVER, DUPLOMATIC. -THREE JAW CHUCK &ECIRC;&ORDM;SCHUNK&ECIRC;&ORDM; &ATILDE;&CEDIL; 315 MM. WORKSPACE SWING OVER BED 550 MM SWING OVER CROSS BEAM 350 MM TOP WIDTH 1600 MM MAXIMUM WORKPIECE WEIGHT 1000 MM WORK SPINDLE SPINDLE NOSE 8 SPINDLE BORE 82 MM SPINDLE TAPER - METRIC 90 MAIN DRIVE 17 KW AUTOMATIC TWO SPEED GEARBOX 2 LEVELS SPINDLE SPEED RANGE 0-3000 RPM 1. LEVEL 0-600 RPM 2. LEVEL 20-3000 RPM MAXIMUM TORQUE AT THE SPINDLE: AT THE 1ST LEVEL 1300 NM AT THE 2ND STAGE OF 295 NM X-AXIS MAX.VERFAHRWEG 285 MM RAPID TRAVERSE 10'000 MM/MIN. Z AXIS MAXIMUM TRAVEL DISTANCE 1590 MM RAPID TRAVERSE 10000 MM / MIN. TAILSTOCK QUILL DIAMETER 90 MM QUILL STROKE 160 MM INNER CONE MORSE 5 IN PINOLE DIMENSIONS OF THE MACHINE L X W X H 3238 X 1920 X 1755 MM WEIGHT OF MACHINE 3400 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Ubicación: Land-turning diameter: 700 mm<br/>swing diameter: 900 mm<br/>turning height: 800 mm<br/>control: sin840d <br/>spindle turning speed - stepless: 0 - 1000 u/min<br/>max. torque on the spindle: max. 9167 nm<br/>cross adjustment: x: 600 mm<br/>feed stepless: 0 - 6000 u/min<br/>rapid traverse: 13,00 m/min<br/>total power requirement: 115,00 kw<br/>weight of the machine ca.: 40,00 t<br/>dimensions of the machine ca.: 7,50 x 5,50 x h4,90 m<br/>machine is dismanteled and can not be inspected under power.<br/><br/><br/><br/> TURNING DIAMETER: 700 MM
SWING DIAMETER: 900 MM
TURNING HEIGHT: 800 MM
CONTROL: SIN840D
SPINDLE TURNING SPEED - STEPLESS: 0 - 1000 U/MIN
MAX. TORQUE ON THE SPINDLE: MAX. 9167 NM
CROSS ADJUSTMENT: X: 600 MM
FEED STEPLESS: 0 - 6000 U/MIN
RAPID TRAVERSE: 13,00 M/MIN
TOTAL POWER REQUIREMENT: 115,00 KW
WEIGHT OF THE MACHINE CA.: 40,00 T
DIMENSIONS OF THE MACHINE CA.: 7,50 X 5,50 X H4,90 M
MACHINE IS DISMANTELED AND CAN NOT BE INSPECTED UNDER POWER.



Vendedor: Johann Kleinlein Werkzeugmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-fks duplo isaddle 40/40 with dkt-200 ref.nr: 2585 manufacturer fks model duplo isaddle 40/40 with dkt-200 year built: 2016 condition: very good price: on technical request spezification: â?¢ 4 pieces gathering tower with 10 stations dsc 10 / 60i
â?¢ 1 piece transfer modules left with manual loading station lul-h
â?¢ 3 pieces bridge between towers
â?¢ 1 pc pc controller
â?¢ collecting 1 piece, creasing and plow folding modules dbms-f2
â?¢ 1 piece saddle stitching station with 2 hohner stitching heads dbms-s
â?¢ 1 piece front trimmer dbms-t
â?¢ 1 piece of head and foot trimming dkt-200
â?¢ 1 piece long delivery dkt-ls
â?¢ 1 piece d-port converter
â?¢ 1 piece pc
â?¢ 1 piece of 23 "touch screen monitor"
â?¢ 1 piece basic holder and folding arm on pillar
â?¢ 4 pieces of ring eyelets stitching heads
â?¢ 1 piece circulation counter, kicker
â?¢ 1 piece 4 stapling head option
â?¢ 1 cut - out option with air control
â?¢ 1 piece 6-side control
â?¢ eyelet 1 piece stop
â?¢ 2 pieces of additional normal truck
â?¢ 1 piece paper high pile delivery 400 str
â?¢ 1 piece offset trim kit
 FKS DUPLO ISADDLE 40/40 WITH DKT-200 REF.NR: 2585 MANUFACTURER FKS MODEL DUPLO ISADDLE 40/40 WITH DKT-200 YEAR BUILT: 2016 CONDITION: VERY GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; 4 PIECES GATHERING TOWER WITH 10 STATIONS DSC 10 / 60I &ACIRC;?&CENT; 1 PIECE TRANSFER MODULES LEFT WITH MANUAL LOADING STATION LUL-H &ACIRC;?&CENT; 3 PIECES BRIDGE BETWEEN TOWERS &ACIRC;?&CENT; 1 PC PC CONTROLLER &ACIRC;?&CENT; COLLECTING 1 PIECE, CREASING AND PLOW FOLDING MODULES DBMS-F2 &ACIRC;?&CENT; 1 PIECE SADDLE STITCHING STATION WITH 2 HOHNER STITCHING HEADS DBMS-S &ACIRC;?&CENT; 1 PIECE FRONT TRIMMER DBMS-T &ACIRC;?&CENT; 1 PIECE OF HEAD AND FOOT TRIMMING DKT-200 &ACIRC;?&CENT; 1 PIECE LONG DELIVERY DKT-LS &ACIRC;?&CENT; 1 PIECE D-PORT CONVERTER &ACIRC;?&CENT; 1 PIECE PC &ACIRC;?&CENT; 1 PIECE OF 23 "TOUCH SCREEN MONITOR" &ACIRC;?&CENT; 1 PIECE BASIC HOLDER AND FOLDING ARM ON PILLAR &ACIRC;?&CENT; 4 PIECES OF RING EYELETS STITCHING HEADS &ACIRC;?&CENT; 1 PIECE CIRCULATION COUNTER, KICKER &ACIRC;?&CENT; 1 PIECE 4 STAPLING HEAD OPTION &ACIRC;?&CENT; 1 CUT - OUT OPTION WITH AIR CONTROL &ACIRC;?&CENT; 1 PIECE 6-SIDE CONTROL &ACIRC;?&CENT; EYELET 1 PIECE STOP &ACIRC;?&CENT; 2 PIECES OF ADDITIONAL NORMAL TRUCK &ACIRC;?&CENT; 1 PIECE PAPER HIGH PILE DELIVERY 400 STR &ACIRC;?&CENT; 1 PIECE OFFSET TRIM KIT
Vendedor: PP Lion Trade e.K.
Año de construcción: usado
Ubicación: Land-turning diameter: 240 mm<br/>turning length: 600 mm<br/>control: siemens 880 <br/>greates pass round over bed: 450 mm<br/>x-travel: 190 mm<br/>z-travel: 635 mm<br/>u-axis: 150 mm<br/>w-axis: 540 mm<br/>spindle bore: 53 mm<br/>bar material dia.: 42 mm<br/>main spindle speeds:: 50 - 5000 <br/>rapid travel - longitudinal/face: 20 / 10 m/min<br/>main drive motor: 18,5 kw<br/>total power requirement: 48 kw<br/>weight of the machine ca.: 6,5 t<br/>dimensions of the machine ca.:  m<br/>double spindle turning centre with c-axis for mainspindle (3° indexing) and <br/>for counter-spindle (continous). <br/>bar loading magazine irco profimat type 42.8 lmax.=2000 mm<br/>2 pcs. 12 station turrets duplomatic vdi 30 with tool drive - 3000 rpm (2,7kw <br/>100%ed, 4kw 40%ed), coolant attachment 3bar - 60l/min., counter spindle <br/>50-4000 rpm - 8,9 kw,<br/>rapid traverse q-axis 20 m/min.<br/>siemens 880 cnc control for 6 axis<br/><br/>accessories:<br/>mainspindle chuck rÖhm 200, counter spindle chuck rÖhm 125,<br/>large number of driven and non-driven toolholders as well as collets for main <br/>and counter spindle.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 240 MM
TURNING LENGTH: 600 MM
CONTROL: SIEMENS 880
GREATES PASS ROUND OVER BED: 450 MM
X-TRAVEL: 190 MM
Z-TRAVEL: 635 MM
U-AXIS: 150 MM
W-AXIS: 540 MM
SPINDLE BORE: 53 MM
BAR MATERIAL DIA.: 42 MM
MAIN SPINDLE SPEEDS:: 50 - 5000
RAPID TRAVEL - LONGITUDINAL/FACE: 20 / 10 M/MIN
MAIN DRIVE MOTOR: 18,5 KW
TOTAL POWER REQUIREMENT: 48 KW
WEIGHT OF THE MACHINE CA.: 6,5 T
DIMENSIONS OF THE MACHINE CA.: M
DOUBLE SPINDLE TURNING CENTRE WITH C-AXIS FOR MAINSPINDLE (3° INDEXING) AND
FOR COUNTER-SPINDLE (CONTINOUS).
BAR LOADING MAGAZINE IRCO PROFIMAT TYPE 42.8 LMAX.=2000 MM
2 PCS. 12 STATION TURRETS DUPLOMATIC VDI 30 WITH TOOL DRIVE - 3000 RPM (2,7KW
100%ED, 4KW 40%ED), COOLANT ATTACHMENT 3BAR - 60L/MIN., COUNTER SPINDLE
50-4000 RPM - 8,9 KW,
RAPID TRAVERSE Q-AXIS 20 M/MIN.
SIEMENS 880 CNC CONTROL FOR 6 AXIS

ACCESSORIES:
MAINSPINDLE CHUCK RÖHM 200, COUNTER SPINDLE CHUCK RÖHM 125,
LARGE NUMBER OF DRIVEN AND NON-DRIVEN TOOLHOLDERS AS WELL AS COLLETS FOR MAIN
AND COUNTER SPINDLE.





Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Precio: 333 €
Ubicación: Land-igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.
igen4 110-xxl
refurbished in 2014
clicks after refurbishment: 5, 6 mio.

performance

rated speed
range depending on paper size:
from 110 ipm for 7 IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. IGEN4 110-XXL REFURBISHED IN 2014 CLICKS AFTER REFURBISHMENT: 5, 6 MIO. PERFORMANCE RATED SPEED RANGE DEPENDING ON PAPER SIZE: FROM 110 IPM FOR 7 "X 7" TO 40 IPM FOR 14.33 X 22.5 " RESOLUTION 4800 × 600 × 1-BIT RECOMMENDED AVERAGE MONTHLY VOLUME 200.000-3,750,000 PAGES PER MONTH LINE SCREENS 150, 175, 200, OR 300 LPI, ALL UTILIZING 256 GRAY LEVELS CAPABILITIES PRINTED SIDES DUPLEX TECHNOLOGY NETWORK INTERFACES 10/100 BASET ETHERNET PROTOCOLS: TCP/IP, APPLETALK, NOVELL IPX/SPX, ETHERTALK ® NET BEUI, PHASE II, LPR/LPD PRINT ENGINE DIGITAL COLOR PRESS XEROGRAPHY PAPER HANDLING PAPER SOURCES UP TO 6 FEEDER MODULES, EACH WITH 2 TRAYS STANDARD PAPER CAPACITY 30.000 SHEETS MAXIMUM PAPER CAPACITY WITH OPTIONS 80.000 SHEETS AUTO DUPLEX AUTOMATIC DUPLEX WITH WIDE RADIUS INVERTER FOR SECOND SIDE IMAGING MEDIA DIMENSIONS-MINIMUM 7 X 7 INCHES MEDIA DIMENSIONS-MAXIMUM 14.33 X 22.5 INCHES MEDIA WEIGHT-MINIMUM 16 LBS MEDIA WEIGHT-MAXIMUM 130 LBS MEDIA TYPES COATED: GLOSS, MATTE, DULL, SILK UNCOATED, TEXTURED, SPECIALTY STOCKS RECYCLED, PERFORATED, TABS, TRANSPARENCIES, A WIDE VARIETY OF LABELS, SYNTHETICS DOCUCARD, NEVERTEAR, DURA PAPER ™ MIXED-STOCK JOBS SUPPORTED AT RATED SPEED NO DRYING TIME BEFORE COATING DOWNLOAD SPECIALTY MEDIA PROSPECTING GUIDE › INPUT TRAY 1 2.500 SHEETS TRAY 2 2.500 SHEETS OPTIONAL HIGH CAPACITY FEEDER LASERMAX ROLL SYSTEMS DOCUSHEETER ™ IG: 50.000 SHEETS OTHER INPUT DEVICES XEROX DOCUCARD SOLUTIONS TILTATRON/STACKATRON/ OUTPUT OUTPUT CAPACITY TWO CARTS PER STACKER; STACKER CART HOLDS 12 "80 LB. COATED TEXT (3.000 SHEETS)-UP TO FOUR STACKER TRUCKS AVAILABLE FINISHING FLATS GBC DELTA LAMINATOR GBC HI TAC LAMINATE FILM D&K SUPER STICK LAMINATE FILM EPIC CTI-635 INLINE COATING SYSTEM STITCHED SETS XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER LAY FLATS GBC GBC DIGICOIL BINDER PUNCH FUSION II TAPE BOUND XEROX DB120-D DOCUMENT BINDER CASE BOUND ON DEMAND MACHINERY PERFECT BOUND XEROX MANUAL BOOK FACTORY CP BOURG BQ270 PERFECT BB3002 PERFECT BINDER STANDARD HORIZON BINDER BOOKLET MAKING XEROX SQUAREFOLD BOOKLET MAKER CP BOURG BDFX BOOKLET MAKER DUPLO 5000 SYSTEM INLINE BOOKLET MAKER DUPLO SCC NEARLINE BOOKLET MAKER OTHER FINISHING OPTIONS XEROX FINISHING INTERFACE KIT PRINT CONTROLLERS DIGITAL FRONT ENDS XEROX FREEFLOW PRINT SERVER FEATURES: MAXIMUM EFFICIENCY FOR SHORT-RUN, FAST-TURNAROUND COLOR JOBS HIGH PERFORMANCE AND PRODUCTIVITY FOR COMPLEX AND GRAPHIC INTENSE VI JOBS CONFIDENTCOLOR TECHNOLOGY INCLUDING: ICC DEVICELINK PROFILING AUTOMATIC IMAGE ENHANCEMENT OUTSTANDING COLOR AND IMAGE QUALITY CONTROLS SEAMLESS INTEROPERABILITY WITH FREEFLOW PRODUCT SUITE INTEGRATED PARALLEL RIP TECHNOLOGY PANTONE ™ LICENSED EASY-TO-USE, CUSTOMIZABLE GUI FOR JOB AND PRODUCTION MANAGEMENT COMPETITOR RECEIVE, RIP, AND PRINT 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, NOVELL ® NDS ® IPX/SPX, APPLETALK ® IPP, IPP, DHCP, SNMP MIB II SUPPORT FOR THIRD-PARTY ADMINISTRATION TOOLS FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE ® ACROBAT ® 7.0, PDF 1.6, PDF/X TIFF, PCL5C, PCL6XL XEROX CX PRINT SERVER, POWERED BY CREO ™ FEATURES: HIGH PERFORMANCE RIP DESIGNED TO OPTIMIZE DIGITAL PRINTING AND VI APPLICATIONS WITH OUTSTANDING IMAGE QUALITY COMPREHENSIVE PRODUCTION TOOLS INCLUDING IMPOSITION, COLOR MANAGEMENT, IMAGE ENHANCEMENT, AND PREFLIGHT FLEXIBLE VARIABLE INFORMATION SUPPORT FOR VPS AND XEROX VIPP TRADITIONAL PRINT AND PRE-PRESS WORKFLOWS 10/100/1000 BASET ETHERNET STANDARD NETWORK INTERFACES: PROTOCOLS: TCP/IP, IPX/SPX, APPLETALK, NET BEUI FILE SUPPORT: POSTSCRIPT LEVEL 1, 2, 3 PDF/ACROBAT EPS, EPSF DCS, DCSF PRINT-READY RTP JOBS CREO VPS XEROX VIPP XEROX EX PRINT SERVER, POWERED BY FIERY ™ FEATURES: LEVERAGE RESOURCES MORE EFFICIENTLY ACHIEVE MAXIMUM PRODUCTIVITY AND POWER INCREASE PROFITS THROUGH FASTER SETUP AND PROCESSING OR HIGH MARGIN, COMPLEX JOBS ENSURE COLOR ACCURACY AND CONSISTENCY IMPROVE COMMUNICATION FOR ENHANCED CUSTOMER SATISFACTION INTEGRATE INTO MULTIPLE ENVIRONMENTS NETWORK STANDARD INTERFACES: TCP/IP, NOVELL ® IPX, APPLETALK, IPP ® (NDS) ETHERTALK ® PHASE II LPR/LPD 10/100/1000 BASET ETHERNET SMB PRINT SHARING (OVER TCP/IP) FILE SUPPORT: ADOBE ® POSTSCRIPT ® LEVEL 1, 2, 3 ADOBE PDF 1.5, 1.6 AND 1.7 (ACROBAT ® 6, 7 AND 8) PDF/X-1A AND 3 ENCAPSULATED POSTSCRIPT (EPS) DCS 2.0, CT/LW TAGGED IMAGE FILE FORMAT (TIFF AND TIFF/IT) JPEG JOBS THAT HAVE BEEN RIPED FOR IGEN4 (GRIDS) JOBS SUBMITTED FROM FREEFLOW MAKEREADY ® ® OR FREEFLOW PRINT MANAGER DISMANTLED BY XEROX, READY FOR INSPECTION/SHIPMENT
Vendedor: Gutenberg Grafishe Machines B.V.
Año de construcción: usado
Ubicación: Land-tank capacity: 100 l,overpressure : bar,motor: ,volume capacity: 28 l/min. l/min.,revolutions per minute of the motor:: bis 1410 u/min.,operating pressure: max. 100 bar,total power requirement: 3,0 kw,weight: ca. 30,0 kg,dimensions l x w x h: 0,8 x 0,43 x 0,8 m, TANK CAPACITY: 100 L,OVERPRESSURE : BAR,MOTOR: ,VOLUME CAPACITY: 28 L/MIN. L/MIN.,REVOLUTIONS PER MINUTE OF THE MOTOR:: BIS 1410 U/MIN.,OPERATING PRESSURE: MAX. 100 BAR,TOTAL POWER REQUIREMENT: 3,0 KW,WEIGHT: CA. 30,0 KG,DIMENSIONS L X W X H: 0,8 X 0,43 X 0,8 M,
Vendedor: WMW AG
Año de construcción: usado
Ubicación: Land-unused machine in china

consists of:

extruder type: shj-30 year: 2017 ac motor: 11 kw heating: 15 kw
09jmd00x
screw speed: 600 rpm concurrent twin-screw extruder 2 x 30 mm / 40 d
screw modular design (screw conveyor elements).
2 x degassing zone
double screw feeder
1 x seitendosierer (optional)

water bath va
250 x 300 x 2000 mm

pelletizer
type: sg - 100

throughput: approx. 50 kg / h depending on the material mix, or

machine is plugged in and is ready for testing.
test is possible. date by arrangement. UNUSED MACHINE IN CHINA CONSISTS OF: EXTRUDER TYPE: SHJ-30 YEAR: 2017 AC MOTOR: 11 KW HEATING: 15 KW 09JMD00X SCREW SPEED: 600 RPM CONCURRENT TWIN-SCREW EXTRUDER 2 X 30 MM / 40 D SCREW MODULAR DESIGN (SCREW CONVEYOR ELEMENTS). 2 X DEGASSING ZONE DOUBLE SCREW FEEDER 1 X SEITENDOSIERER (OPTIONAL) WATER BATH VA 250 X 300 X 2000 MM PELLETIZER TYPE: SG - 100 THROUGHPUT: APPROX. 50 KG / H DEPENDING ON THE MATERIAL MIX, OR MACHINE IS PLUGGED IN AND IS READY FOR TESTING. TEST IS POSSIBLE. DATE BY ARRANGEMENT.
Vendedor: Mr Artur Morgenshteyn
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 400 mm<br>turning length: 1350 mm<br>turret positions: 8<br>cnc brand: fanuc<br>cnc model: 210ita <br><p>make colchester mk2</p>
<p>type combi k2</p>
<p>year 2001</p>
<p>fanuc 210 ita</p>
<p>centre height (mm)swing = 400</p>
<p>center distance (mm)dbc = 1.350</p>
<p>spindle bore bore = 54</p>
<p>duplomatic revolver 8 x </p>
<p>rohm 315 3 chuck</p>
<p>speeds 2500 rpm</p>
<p>
TURNING DIAMETER: 400 MM
TURNING LENGTH: 1350 MM
TURRET POSITIONS: 8
CNC BRAND: FANUC
CNC MODEL: 210ITA

MAKE COLCHESTER MK2

TYPE COMBI K2

YEAR 2001

FANUC 210 ITA

CENTRE HEIGHT (MM)SWING = 400

CENTER DISTANCE (MM)DBC = 1.350

SPINDLE BORE BORE = 54

DUPLOMATIC REVOLVER 8 X

ROHM 315 3 CHUCK

SPEEDS 2500 RPM

Vendedor: Mach4metal
Año de construcción: usado
Precio: 250 €
Ubicación: Land-machine was until recently still in operation, and comes from a betriebsauflã¶sung.der is net price, you get a rechnung.bei questions can you have me call 01708344313.wir even more machines coming from the operational resolution, like we sell them all in a posten.versand after arrangement. since it's used machines, we can give no guarantee on this
 MACHINE WAS UNTIL RECENTLY STILL IN OPERATION, AND COMES FROM A BETRIEBSAUFL&ATILDE;&PARA;SUNG.DER IS NET PRICE, YOU GET A RECHNUNG.BEI QUESTIONS CAN YOU HAVE ME CALL 01708344313.WIR EVEN MORE MACHINES COMING FROM THE OPERATIONAL RESOLUTION, LIKE WE SELL THEM ALL IN A POSTEN.VERSAND AFTER ARRANGEMENT. SINCE IT'S USED MACHINES, WE CAN GIVE NO GUARANTEE ON THIS
Vendedor: Klema
Año de construcción: usado
Ubicación: Land-<br>turning diameter: 400 mm<br>turning length: 1350 mm<br>turret positions: 0<br>cnc brand: fanuc<br>cnc model: 210 ita <br><p>make colchester k2</p>
<p>type combi k2</p>
<p>year 2001 </p>
<p>fanuc 210 ita</p>
<p>centre height (mm)swing bed = 400</p>
<p>center distance (mm)dbc = 1.350</p>
<p>spindle borebore = 54</p>
<p>11 kw / 2500 rpm</p>
<p>8 pos duplomatic turret</p>
<p>tool size vdi 30</p>
<p>
TURNING DIAMETER: 400 MM
TURNING LENGTH: 1350 MM
TURRET POSITIONS: 0
CNC BRAND: FANUC
CNC MODEL: 210 ITA

MAKE COLCHESTER K2

TYPE COMBI K2

YEAR 2001

FANUC 210 ITA

CENTRE HEIGHT (MM)SWING BED = 400

CENTER DISTANCE (MM)DBC = 1.350

SPINDLE BOREBORE = 54

11 KW / 2500 RPM

8 POS DUPLOMATIC TURRET

TOOL SIZE VDI 30

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-fully automatic
2 x collator dc1060
1 x dbm 500t
1 x connecting bridge
1 x stacker dbm-ls1
 FULLY AUTOMATIC 2 X COLLATOR DC1060 1 X DBM 500T 1 X CONNECTING BRIDGE 1 X STACKER DBM-LS1
Vendedor: SOLUTION GRAPHIQUE FRANCE
Año de construcción: usado
Ubicación: Land-turning diameter:580 mm<br/>turning length:885 mm<br/>control: siemens 808 d advanced <br/>total power requirement:11 kw<br/>weight of the machine ca.:3800 kg<br/>dimensions of the machine ca.: m<br/><br/>capacity:   height of centers: 290 mm swing over bed: 580 mm swing over cross slide: 380 mm width of bed: 400 mm turning length: 885 mm  spindle:    spindle nose din 55027: no. 8 front bearing diameter: 120 mm spindle bore: 72 mm spindle taper: m 80  head stock:    number of spindle speeds:  3 i - range: 25 - 100 rpm ii - range: 100 - 400 rpm iii - range: 500 - 2.000 rpm  travels and feeds:    longitudinal feed (z-axis): max. 8 m/min lateral feed (x-axis): max. 8 m/min rapid traverse (z and x-axis):  max. 8 m/min cross slide maximum travel: 290 mm  ball screw:    z-axis: 50 x 10 mm x-axis: 32 x 5 mm  tailstock:    quill diameter: 90 mm quill travel: 230 mm quill taper: mk 5  drives:    main drive power: 11 kw (at160m4) z-axis servo drive power: 16 nm - 3,3 kw (1fk7083) x-axis servo drive power: 11 nm - 2,29 kw (1fk7063) spindle maximum torque: 1.120 nm z-axis tow strength: 1.450 dan  x-axis tow strength: 1.050 dan weight: ~ 3.800 kg    quick change tool post multifix type c with four tool holders cnc siemens 808 d advanced safety covering on the front safety covering on the back removable bridge quick release tailstock coolant equiptment machine lamp fixed centres back plate for chuck machine users manual in german and english (further languages on request) cnc users manual in german and english (further languages on request) circuit diagram  options:  lathe chuck   3-jaw chuck Ø 250 bison   4-jaw chuck Ø 500 bison    tool changer   4-position electromechanical turret head baruffaldi with vertical axis of rotation type tan 160  4-position electromechanical turret head duplomatic with vertical axis of rotation type trm n160  8 station  duplomatic bsv n160 horizontal axis of rotation 12 station duplomatic bsv n160 horizontal axis of rotation chip conveyor   dbc 1.000 mm  dbc 1.500 mm  dbc 2.000 mm  dbc 3.000 mm  dbc 4.000 mm  dbc 5.000 mm   divers    pneumatic drive of tailsock quill   further options on request. prices only valid if ordered with machine.  depending on ordered lathe chuck and tool changer, the basic data of swing and turning length change.  (sample photo) TURNING DIAMETER:580 MM
TURNING LENGTH:885 MM
CONTROL: SIEMENS 808 D ADVANCED
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:3800 KG
DIMENSIONS OF THE MACHINE CA.: M

CAPACITY: HEIGHT OF CENTERS: 290 MM SWING OVER BED: 580 MM SWING OVER CROSS SLIDE: 380 MM WIDTH OF BED: 400 MM TURNING LENGTH: 885 MM SPINDLE: SPINDLE NOSE DIN 55027: NO. 8 FRONT BEARING DIAMETER: 120 MM SPINDLE BORE: 72 MM SPINDLE TAPER: M 80 HEAD STOCK: NUMBER OF SPINDLE SPEEDS: 3 I - RANGE: 25 - 100 RPM II - RANGE: 100 - 400 RPM III - RANGE: 500 - 2.000 RPM TRAVELS AND FEEDS: LONGITUDINAL FEED (Z-AXIS): MAX. 8 M/MIN LATERAL FEED (X-AXIS): MAX. 8 M/MIN RAPID TRAVERSE (Z AND X-AXIS): MAX. 8 M/MIN CROSS SLIDE MAXIMUM TRAVEL: 290 MM BALL SCREW: Z-AXIS: 50 X 10 MM X-AXIS: 32 X 5 MM TAILSTOCK: QUILL DIAMETER: 90 MM QUILL TRAVEL: 230 MM QUILL TAPER: MK 5 DRIVES: MAIN DRIVE POWER: 11 KW (AT160M4) Z-AXIS SERVO DRIVE POWER: 16 NM - 3,3 KW (1FK7083) X-AXIS SERVO DRIVE POWER: 11 NM - 2,29 KW (1FK7063) SPINDLE MAXIMUM TORQUE: 1.120 NM Z-AXIS TOW STRENGTH: 1.450 DAN X-AXIS TOW STRENGTH: 1.050 DAN WEIGHT: ~ 3.800 KG QUICK CHANGE TOOL POST MULTIFIX TYPE C WITH FOUR TOOL HOLDERS CNC SIEMENS 808 D ADVANCED SAFETY COVERING ON THE FRONT SAFETY COVERING ON THE BACK REMOVABLE BRIDGE QUICK RELEASE TAILSTOCK COOLANT EQUIPTMENT MACHINE LAMP FIXED CENTRES BACK PLATE FOR CHUCK MACHINE USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CNC USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CIRCUIT DIAGRAM OPTIONS: LATHE CHUCK 3-JAW CHUCK Ø 250 BISON 4-JAW CHUCK Ø 500 BISON TOOL CHANGER 4-POSITION ELECTROMECHANICAL TURRET HEAD BARUFFALDI WITH VERTICAL AXIS OF ROTATION TYPE TAN 160 4-POSITION ELECTROMECHANICAL TURRET HEAD DUPLOMATIC WITH VERTICAL AXIS OF ROTATION TYPE TRM N160 8 STATION DUPLOMATIC BSV N160 HORIZONTAL AXIS OF ROTATION 12 STATION DUPLOMATIC BSV N160 HORIZONTAL AXIS OF ROTATION CHIP CONVEYOR DBC 1.000 MM DBC 1.500 MM DBC 2.000 MM DBC 3.000 MM DBC 4.000 MM DBC 5.000 MM DIVERS PNEUMATIC DRIVE OF TAILSOCK QUILL FURTHER OPTIONS ON REQUEST. PRICES ONLY VALID IF ORDERED WITH MACHINE. DEPENDING ON ORDERED LATHE CHUCK AND TOOL CHANGER, THE BASIC DATA OF SWING AND TURNING LENGTH CHANGE. (SAMPLE PHOTO)
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-bestehend aus:
fks/duplo zusammentrag-automat dc-10/60 pro
Übergabeeinheit lul-hm inklusive aussteuerfach
fks/duplo broschürenautomat dbm-350
fks/duplo fronttrimmer dbm-350 t
fks/versatzschüttler dbm-500jx

bis zu 3.000 a5 broschüren/h
bis zu 9.000 sätze/h
automatische formatverstellung in 25 sekunden
papiergewichte 60 bis 300 g/m2
integrierte buchrückenpresse für flach liegende broschüren
gleichzeitig nach rechts zusammentragen und nach links broschüren erstellen BESTEHEND AUS: FKS/DUPLO ZUSAMMENTRAG-AUTOMAT DC-10/60 PRO ÜBERGABEEINHEIT LUL-HM INKLUSIVE AUSSTEUERFACH FKS/DUPLO BROSCHüRENAUTOMAT DBM-350 FKS/DUPLO FRONTTRIMMER DBM-350 T FKS/VERSATZSCHüTTLER DBM-500JX BIS ZU 3.000 A5 BROSCHüREN/H BIS ZU 9.000 SäTZE/H AUTOMATISCHE FORMATVERSTELLUNG IN 25 SEKUNDEN PAPIERGEWICHTE 60 BIS 300 G/M2 INTEGRIERTE BUCHRüCKENPRESSE FüR FLACH LIEGENDE BROSCHüREN GLEICHZEITIG NACH RECHTS ZUSAMMENTRAGEN UND NACH LINKS BROSCHüREN ERSTELLEN
Vendedor: DRUPAMA KG (GmbH & Co. KG)
Año de construcción: usado
Ubicación: Land-turning diameter:860 mm<br/>turning length:2850 mm<br/>control:siemens 808 d advanced <br/>total power requirement:18,5 kw<br/>weight of the machine ca.: 6.300 kg<br/>dimensions of the machine ca.: m<br/><br/>capacity:    height of centers: 430 mm swing over bed: 860 mm swing over cross slide: 620 mm width of bed: 560 mm turning length: 2.850 mm  spindle:    spindle nose din 55027: no. 11 front bearing diameter: 170 mm spindle bore: 132 mm spindle taper: m 140  head stock:    number of spindle speeds:  3 i - range: 7 - 42 rpm ii - range: 28 - 170 rpm iii - range: 165 - 1.015 rpm  travels and feeds:    longitudinal feed (z-axis): max. 8 m/min lateral feed (x-axis): max. 8 m/min rapid traverse (z and x-axis):  max. 8 m/min cross slide maximum travel: 430 mm  ball screw:    z-axis: 50 x 10 mm x-axis: 32 x 5 mm  tailstock:    quill diameter: 105 mm quill travel: 225 mm quill taper: mk 6  drives:    main drive power: 18,5 kw (at180m4) z-axis servo drive power: 18 nm -3,77 kw (1fk7100) x-axis servo drive power: 11 nm - 2,29 kw (1fk7063) spindle maximum torque: 2.250 nm z-axis tow strength:  1.250 dan x-axis tow strength:  1.050 dan weight: ~ 6.300 kg   quick change tool post multifix type c with four tool holders cnc siemens 808 d advanced safety covering on the front safety covering on the back removable bridge mechanized movement of tailstock coolant equiptment machine lamp fixed centres reducing bush m80 auf mk5 back plate for chuck machine users manual in german and english (further languages on request) cnc users manual in german and english (further languages on request) circuit diagram  options:  lathe chuck   3-jaw chuck Ø 400 bison  4-jaw chuck Ø 760 bison   tool changer   4-position electromechanical turret head baruffaldi with vertical axis of rotation type tan 210  4-position electromechanical turret head duplomatic with vertical axis of rotation type trm n200 8 station  duplomatic bsv n200 horizontalaxis of rotation 12 station duplomatic bsv n200 horizontal axis of rotation  chip conveyor   dbc 1.500 mm  dbc 2.000 mm  dbc 3.000 mm  dbc 4.000 mm  dbc 5.000 mm  dbc 6.000 mm  divers pneumatic drive of tailsock quill    further options on request. prices only valid if ordered with machine.  depending on ordered lathe chuck and tool changer, the basic data of swing and turning length change.  (sample photo) TURNING DIAMETER:860 MM
TURNING LENGTH:2850 MM
CONTROL:SIEMENS 808 D ADVANCED
TOTAL POWER REQUIREMENT:18,5 KW
WEIGHT OF THE MACHINE CA.: 6.300 KG
DIMENSIONS OF THE MACHINE CA.: M

CAPACITY: HEIGHT OF CENTERS: 430 MM SWING OVER BED: 860 MM SWING OVER CROSS SLIDE: 620 MM WIDTH OF BED: 560 MM TURNING LENGTH: 2.850 MM SPINDLE: SPINDLE NOSE DIN 55027: NO. 11 FRONT BEARING DIAMETER: 170 MM SPINDLE BORE: 132 MM SPINDLE TAPER: M 140 HEAD STOCK: NUMBER OF SPINDLE SPEEDS: 3 I - RANGE: 7 - 42 RPM II - RANGE: 28 - 170 RPM III - RANGE: 165 - 1.015 RPM TRAVELS AND FEEDS: LONGITUDINAL FEED (Z-AXIS): MAX. 8 M/MIN LATERAL FEED (X-AXIS): MAX. 8 M/MIN RAPID TRAVERSE (Z AND X-AXIS): MAX. 8 M/MIN CROSS SLIDE MAXIMUM TRAVEL: 430 MM BALL SCREW: Z-AXIS: 50 X 10 MM X-AXIS: 32 X 5 MM TAILSTOCK: QUILL DIAMETER: 105 MM QUILL TRAVEL: 225 MM QUILL TAPER: MK 6 DRIVES: MAIN DRIVE POWER: 18,5 KW (AT180M4) Z-AXIS SERVO DRIVE POWER: 18 NM -3,77 KW (1FK7100) X-AXIS SERVO DRIVE POWER: 11 NM - 2,29 KW (1FK7063) SPINDLE MAXIMUM TORQUE: 2.250 NM Z-AXIS TOW STRENGTH: 1.250 DAN X-AXIS TOW STRENGTH: 1.050 DAN WEIGHT: ~ 6.300 KG QUICK CHANGE TOOL POST MULTIFIX TYPE C WITH FOUR TOOL HOLDERS CNC SIEMENS 808 D ADVANCED SAFETY COVERING ON THE FRONT SAFETY COVERING ON THE BACK REMOVABLE BRIDGE MECHANIZED MOVEMENT OF TAILSTOCK COOLANT EQUIPTMENT MACHINE LAMP FIXED CENTRES REDUCING BUSH M80 AUF MK5 BACK PLATE FOR CHUCK MACHINE USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CNC USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CIRCUIT DIAGRAM OPTIONS: LATHE CHUCK 3-JAW CHUCK Ø 400 BISON 4-JAW CHUCK Ø 760 BISON TOOL CHANGER 4-POSITION ELECTROMECHANICAL TURRET HEAD BARUFFALDI WITH VERTICAL AXIS OF ROTATION TYPE TAN 210 4-POSITION ELECTROMECHANICAL TURRET HEAD DUPLOMATIC WITH VERTICAL AXIS OF ROTATION TYPE TRM N200 8 STATION DUPLOMATIC BSV N200 HORIZONTALAXIS OF ROTATION 12 STATION DUPLOMATIC BSV N200 HORIZONTAL AXIS OF ROTATION CHIP CONVEYOR DBC 1.500 MM DBC 2.000 MM DBC 3.000 MM DBC 4.000 MM DBC 5.000 MM DBC 6.000 MM DIVERS PNEUMATIC DRIVE OF TAILSOCK QUILL FURTHER OPTIONS ON REQUEST. PRICES ONLY VALID IF ORDERED WITH MACHINE. DEPENDING ON ORDERED LATHE CHUCK AND TOOL CHANGER, THE BASIC DATA OF SWING AND TURNING LENGTH CHANGE. (SAMPLE PHOTO)
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bausano twin screw pelletizer

2 x 140 mm. diam. 2000 mm.long counter- rotating screws
bausano die face pelletizer
lorandi cutter
air cooling-vibrating unit,
mistral b.30/2 vent ( year 1996)
capacity 350 kg/h
sworn appraisal BAUSANO TWIN SCREW PELLETIZER 2 X 140 MM. DIAM. 2000 MM.LONG COUNTER- ROTATING SCREWS BAUSANO DIE FACE PELLETIZER LORANDI CUTTER AIR COOLING-VIBRATING UNIT, MISTRAL B.30/2 VENT ( YEAR 1996) CAPACITY 350 KG/H SWORN APPRAISAL
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-turning diameter:760 mm<br/>turning length:1850 mm<br/>control:siemens 808 d advanced <br/>total power requirement:18,5 kw kw<br/>weight of the machine ca.:6060 t<br/>dimensions of the machine ca.: m<br/><br/>capacity:   height of centers: 380 mm swing over bed: 760 mm swing over cross slide: 520 mm width of bed:  560 mm turning length:  1.850 mm spindle:   spindle nose din 55027: no. 11 front bearing diameter: 170 mm spindle bore:  132 mm spindle taper: m 140 head stock:   number of spindle speeds: 3 i - range: 7 - 42 rpm ii - range: 28 - 170 rpm iii - range: 165 - 1.015 rpm travels and feeds:   longitudinal feed (z-axis): max. 8 m/min lateral feed (x-axis): max. 8 m/min rapid traverse (z and x-axis):  max. 8 m/min cross slide maximum travel: 430 mm ball screw:   z-axis: 50 x 10 mm x-axis: 32 x 5 mm tailstock:   quill diameter: 105 mm quill travel:  225 mm quill taper:  mk 6 drives:   main drive power: 18,5 kw (at180m4) z-axis servo drive power:  18 nm -3,77 kw (1fk7100) x-axis servo drive power:  11 nm - 2,29 kw (1fk7063) spindle maximum torque:  2.250 nm z-axis tow strength:  1.250 dan x-axis tow strength:  1.050 dan weight: ~ 6.060 kg   quick change tool post multifix type c with four tool holders cnc siemens 808 d advanced safety covering on the front safety covering on the back removable bridge mechanized movement of tailstock coolant equiptment machine lamp fixed centres reducing bush m80 auf mk5 back plate for chuck machine users manual in german and english (further languages on request) cnc users manual in german and english (further languages on request) circuit diagram  options:  lathe chuck   3-jaw chuck Ø 400 bison  4-jaw chuck Ø 760 bison  tool changer   4-position electromechanical turret head baruffaldi with vertical axis of rotation type tan 210 4-position electromechanical turret head duplomatic with vertical axis of rotation type trm n200   8 station  duplomatic bsv n200 horizontal axis of rotation 12 station duplomatic bsv n200 horizontal axis of rotation  chip conveyor   dbc 1.500 mm  dbc 2.000 mm  dbc 3.000 mm  dbc 4.000 mm  dbc 5.000 mm  dbc 6.000 mm  divers   pneumatic drive of tailsock quill  further options on request. prices only valid if ordered with machine.  depending on ordered lathe chuck and tool changer, the basic data of swing and turning length change.  (sample photo) TURNING DIAMETER:760 MM
TURNING LENGTH:1850 MM
CONTROL:SIEMENS 808 D ADVANCED
TOTAL POWER REQUIREMENT:18,5 KW KW
WEIGHT OF THE MACHINE CA.:6060 T
DIMENSIONS OF THE MACHINE CA.: M

CAPACITY: HEIGHT OF CENTERS: 380 MM SWING OVER BED: 760 MM SWING OVER CROSS SLIDE: 520 MM WIDTH OF BED: 560 MM TURNING LENGTH: 1.850 MM SPINDLE: SPINDLE NOSE DIN 55027: NO. 11 FRONT BEARING DIAMETER: 170 MM SPINDLE BORE: 132 MM SPINDLE TAPER: M 140 HEAD STOCK: NUMBER OF SPINDLE SPEEDS: 3 I - RANGE: 7 - 42 RPM II - RANGE: 28 - 170 RPM III - RANGE: 165 - 1.015 RPM TRAVELS AND FEEDS: LONGITUDINAL FEED (Z-AXIS): MAX. 8 M/MIN LATERAL FEED (X-AXIS): MAX. 8 M/MIN RAPID TRAVERSE (Z AND X-AXIS): MAX. 8 M/MIN CROSS SLIDE MAXIMUM TRAVEL: 430 MM BALL SCREW: Z-AXIS: 50 X 10 MM X-AXIS: 32 X 5 MM TAILSTOCK: QUILL DIAMETER: 105 MM QUILL TRAVEL: 225 MM QUILL TAPER: MK 6 DRIVES: MAIN DRIVE POWER: 18,5 KW (AT180M4) Z-AXIS SERVO DRIVE POWER: 18 NM -3,77 KW (1FK7100) X-AXIS SERVO DRIVE POWER: 11 NM - 2,29 KW (1FK7063) SPINDLE MAXIMUM TORQUE: 2.250 NM Z-AXIS TOW STRENGTH: 1.250 DAN X-AXIS TOW STRENGTH: 1.050 DAN WEIGHT: ~ 6.060 KG QUICK CHANGE TOOL POST MULTIFIX TYPE C WITH FOUR TOOL HOLDERS CNC SIEMENS 808 D ADVANCED SAFETY COVERING ON THE FRONT SAFETY COVERING ON THE BACK REMOVABLE BRIDGE MECHANIZED MOVEMENT OF TAILSTOCK COOLANT EQUIPTMENT MACHINE LAMP FIXED CENTRES REDUCING BUSH M80 AUF MK5 BACK PLATE FOR CHUCK MACHINE USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CNC USERS MANUAL IN GERMAN AND ENGLISH (FURTHER LANGUAGES ON REQUEST) CIRCUIT DIAGRAM OPTIONS: LATHE CHUCK 3-JAW CHUCK Ø 400 BISON 4-JAW CHUCK Ø 760 BISON TOOL CHANGER 4-POSITION ELECTROMECHANICAL TURRET HEAD BARUFFALDI WITH VERTICAL AXIS OF ROTATION TYPE TAN 210 4-POSITION ELECTROMECHANICAL TURRET HEAD DUPLOMATIC WITH VERTICAL AXIS OF ROTATION TYPE TRM N200 8 STATION DUPLOMATIC BSV N200 HORIZONTAL AXIS OF ROTATION 12 STATION DUPLOMATIC BSV N200 HORIZONTAL AXIS OF ROTATION CHIP CONVEYOR DBC 1.500 MM DBC 2.000 MM DBC 3.000 MM DBC 4.000 MM DBC 5.000 MM DBC 6.000 MM DIVERS PNEUMATIC DRIVE OF TAILSOCK QUILL FURTHER OPTIONS ON REQUEST. PRICES ONLY VALID IF ORDERED WITH MACHINE. DEPENDING ON ORDERED LATHE CHUCK AND TOOL CHANGER, THE BASIC DATA OF SWING AND TURNING LENGTH CHANGE. (SAMPLE PHOTO)
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-bausano twin screw pelletizer

manufacturer: bausano
type: mod.140
2 x 140 mm. diam.2700 mm long.counter- rotating screws
screen changer
hydraulic power station
bausano die face pelletizer
air cooling-vibrating unit,
mistral b.30/2 vent
capacity 510 kg/h
sworn appraisal BAUSANO TWIN SCREW PELLETIZER MANUFACTURER: BAUSANO TYPE: MOD.140 2 X 140 MM. DIAM.2700 MM LONG.COUNTER- ROTATING SCREWS SCREEN CHANGER HYDRAULIC POWER STATION BAUSANO DIE FACE PELLETIZER AIR COOLING-VIBRATING UNIT, MISTRAL B.30/2 VENT CAPACITY 510 KG/H SWORN APPRAISAL
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-x-travel:650 mm<br/>y-travel:350 mm<br/>spindle taper iso:30 <br/>spindle turning speed range:300 - 4800 u/min<br/>throat:340 mm<br/>table-size:1000 x 320 mm<br/>quill stroke:100 mm<br/>milling head adjustable:100 mm<br/>spindle motor:1,5 kw<br/>hydr. pumpmotor:2,2 kw<br/>2 pump motors:0,5 kw<br/>weight of the machine ca.:850 kg<br/>dimensions of the machine ca.:1100 x 1200 x 2100 mm<br/>central lubrication: <br/>cooling system: <br/>machine-lighting: <br/>hydr. autom. duplomatic-contour-diematic drive: <br/><br/> X-TRAVEL:650 MM
Y-TRAVEL:350 MM
SPINDLE TAPER ISO:30
SPINDLE TURNING SPEED RANGE:300 - 4800 U/MIN
THROAT:340 MM
TABLE-SIZE:1000 X 320 MM
QUILL STROKE:100 MM
MILLING HEAD ADJUSTABLE:100 MM
SPINDLE MOTOR:1,5 KW
HYDR. PUMPMOTOR:2,2 KW
2 PUMP MOTORS:0,5 KW
WEIGHT OF THE MACHINE CA.:850 KG
DIMENSIONS OF THE MACHINE CA.:1100 X 1200 X 2100 MM
CENTRAL LUBRICATION:
COOLING SYSTEM:
MACHINE-LIGHTING:
HYDR. AUTOM. DUPLOMATIC-CONTOUR-DIEMATIC DRIVE:

Vendedor: SALING Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-bausano twin screw pelletizer

2×66 mm screws 30 l/d
mod.md 2 66/30
construction year 1990
feeding hopper
electric cabinet BAUSANO TWIN SCREW PELLETIZER 2×66 MM SCREWS 30 L/D MOD.MD 2 66/30 CONSTRUCTION YEAR 1990 FEEDING HOPPER ELECTRIC CABINET
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-bausano twin screw extruders

manufacturer: bausano
type: mod.88 md 2/66/19
construction year 1990
2×66 mm. screws l/d19 BAUSANO TWIN SCREW EXTRUDERS MANUFACTURER: BAUSANO TYPE: MOD.88 MD 2/66/19 CONSTRUCTION YEAR 1990 2×66 MM. SCREWS L/D19
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-icma san giorgio twin screw 2005

type mcm 140-32 d
construction year 2005
can be seen runing till end august 18
forced feeding unit
twin screw extruder 145 mm diam. 32 l/d
100 rpm on screw
d.c.215 kw motor
filtec screen changer ca250
hydraulic power station
filtec die face pelletizer
filtec drying unit
filtec vibro-classifier
hopper vent
electric cabinet
spare parts :
exruder d.c.motor p200 sicma 250 kw
storage for power station
icma 2006 side dosing unit for mineral charge
some heaters
some screw sectors ICMA SAN GIORGIO TWIN SCREW 2005 TYPE MCM 140-32 D CONSTRUCTION YEAR 2005 CAN BE SEEN RUNING TILL END AUGUST 18 FORCED FEEDING UNIT TWIN SCREW EXTRUDER 145 MM DIAM. 32 L/D 100 RPM ON SCREW D.C.215 KW MOTOR FILTEC SCREEN CHANGER CA250 HYDRAULIC POWER STATION FILTEC DIE FACE PELLETIZER FILTEC DRYING UNIT FILTEC VIBRO-CLASSIFIER HOPPER VENT ELECTRIC CABINET SPARE PARTS : EXRUDER D.C.MOTOR P200 SICMA 250 KW STORAGE FOR POWER STATION ICMA 2006 SIDE DOSING UNIT FOR MINERAL CHARGE SOME HEATERS SOME SCREW SECTORS
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-amut water filtering system

loop cycle of cooling water in a pelletizing  line,
machine offered completely refurbished.
maximum capacity 15 m3/h water  (for pelletizer up to 1200 kg./h throughput)
n.1 feeding group with pump (1 bar). turning body in aisi 304 kw 0,75
n.1 tekno 10.20 group for non-woven with sensor, made in aisi 304 stainless steel (exept probe and variator).
average filtering 50 my (min 43 max 60 my). motovariator kw 0,12
max dimensions : mm.2020x1100x440 height
n. 1 000 lt. aisi 304 stainless steel tank for filtered water collection mm.1500x1100x500
n.1 collecting tray for used non-woven tissue, made in aisi 304 stainless steel mm.1100x200x500
n.1 electrical cabinet. AMUT WATER FILTERING SYSTEM LOOP CYCLE OF COOLING WATER IN A PELLETIZING LINE, MACHINE OFFERED COMPLETELY REFURBISHED. MAXIMUM CAPACITY 15 M3/H WATER (FOR PELLETIZER UP TO 1200 KG./H THROUGHPUT) N.1 FEEDING GROUP WITH PUMP (1 BAR). TURNING BODY IN AISI 304 KW 0,75 N.1 TEKNO 10.20 GROUP FOR NON-WOVEN WITH SENSOR, MADE IN AISI 304 STAINLESS STEEL (EXEPT PROBE AND VARIATOR). AVERAGE FILTERING 50 MY (MIN 43 MAX 60 MY). MOTOVARIATOR KW 0,12 MAX DIMENSIONS : MM.2020X1100X440 HEIGHT N. 1 000 LT. AISI 304 STAINLESS STEEL TANK FOR FILTERED WATER COLLECTION MM.1500X1100X500 N.1 COLLECTING TRAY FOR USED NON-WOVEN TISSUE, MADE IN AISI 304 STAINLESS STEEL MM.1100X200X500 N.1 ELECTRICAL CABINET.
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-collection tower duplo
8 stations
in production
location: germany
price: on request COLLECTION TOWER DUPLO 8 STATIONS IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST
Vendedor: USED Machines
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-
general data

reference no: 3826
manufacturer: duplo
type: dc-10 mini with able fold dc 61
. no.: 61021024
year of constr.: unspecified
delivery time: 3-4 days

facilities:

weight: 52 kg
size: 540bx450tx813h
power supply: 220v
power consumption: unspecified
display: block and offset
display: table
double sheet control: yes
false document detection: yes
format: din-a3 and smaller
format max: 257 x 364
min. format: 14, 8 x 21
cycles/h: 35 pack / min
bench machine: with cabinet
tower: 8 stations GENERAL DATA REFERENCE NO: 3826 MANUFACTURER: DUPLO TYPE: DC-10 MINI WITH ABLE FOLD DC 61 . NO.: 61021024 YEAR OF CONSTR.: UNSPECIFIED DELIVERY TIME: 3-4 DAYS FACILITIES: WEIGHT: 52 KG SIZE: 540BX450TX813H POWER SUPPLY: 220V POWER CONSUMPTION: UNSPECIFIED DISPLAY: BLOCK AND OFFSET DISPLAY: TABLE DOUBLE SHEET CONTROL: YES FALSE DOCUMENT DETECTION: YES FORMAT: DIN-A3 AND SMALLER FORMAT MAX: 257 X 364 MIN. FORMAT: 14, 8 X 21 CYCLES/H: 35 PACK / MIN BENCH MACHINE: WITH CABINET TOWER: 8 STATIONS
Vendedor: Brüstle Maschinen für Graphik und Druck
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-
general data

reference no.: 3975
manufacturer: duplo
type: dc 10000s stapler, folding, trimmer
year of constr.: unspecified
shipping time: on request

description:
 duplo dc 10000s gathering machine 10 stations.
stitching/folding and front cutter with fully automatic setting!
hohner stapling heads

facilities:

weight: 375 kg
size: l630 xb700 x h2045 mm
power supply: 230v
power consumption: unspecified
format max: 350 x 500
min. format: 120 x 200
speed. f. fabrication. v. booklet: 3600 sets/h
hand side dish: yes
book station / folding unit: 200 dbm
load capacity: 55 mm
paper weight: 40-250 g / mâ²
control: digital
cycles/h: 5000 packs/h
trimmer: dbm 250 t
tower: 10 stations GENERAL DATA REFERENCE NO.: 3975 MANUFACTURER: DUPLO TYPE: DC 10000S STAPLER, FOLDING, TRIMMER YEAR OF CONSTR.: UNSPECIFIED SHIPPING TIME: ON REQUEST DESCRIPTION: DUPLO DC 10000S GATHERING MACHINE 10 STATIONS. STITCHING/FOLDING AND FRONT CUTTER WITH FULLY AUTOMATIC SETTING! HOHNER STAPLING HEADS FACILITIES: WEIGHT: 375 KG SIZE: L630 XB700 X H2045 MM POWER SUPPLY: 230V POWER CONSUMPTION: UNSPECIFIED FORMAT MAX: 350 X 500 MIN. FORMAT: 120 X 200 SPEED. F. FABRICATION. V. BOOKLET: 3600 SETS/H HAND SIDE DISH: YES BOOK STATION / FOLDING UNIT: 200 DBM LOAD CAPACITY: 55 MM PAPER WEIGHT: 40-250 G / M&ACIRC;&SUP2; CONTROL: DIGITAL CYCLES/H: 5000 PACKS/H TRIMMER: DBM 250 T TOWER: 10 STATIONS
Vendedor: Brüstle Maschinen für Graphik und Druck
Año de construcción: usado
Ubicación: Land-heidelberg
pm 52
2fb.
baujahr: 05.2006
prints: 10,436,400
easy plate
straight
in production
location: germany
price: on request

dpx system with rip

cutting machine
polar 66
+ knife
year: 2006
in production
location: germany
price: on request

collection tower duplo
8 stations
in production
location: germany
price: on request

heidelberg tiegel
bigger a4
year: approx. 54
punching, nummering, perforating, printing
in production
location: germany
price: on request

folding machine
year unknown 98 bought used
multigraf
9 cm wide
2 pockets
location: germany
price: on request

pallet jack
location: germany
price: on request

drilling machine
location: germany
price: on request

folding machine
faltex
location: germany
price: on request

colors HEIDELBERG PM 52 2FB. BAUJAHR: 05.2006 PRINTS: 10,436,400 EASY PLATE STRAIGHT IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST DPX SYSTEM WITH RIP CUTTING MACHINE POLAR 66 + KNIFE YEAR: 2006 IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST COLLECTION TOWER DUPLO 8 STATIONS IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST HEIDELBERG TIEGEL BIGGER A4 YEAR: APPROX. 54 PUNCHING, NUMMERING, PERFORATING, PRINTING IN PRODUCTION LOCATION: GERMANY PRICE: ON REQUEST FOLDING MACHINE YEAR UNKNOWN 98 BOUGHT USED MULTIGRAF 9 CM WIDE 2 POCKETS LOCATION: GERMANY PRICE: ON REQUEST PALLET JACK LOCATION: GERMANY PRICE: ON REQUEST DRILLING MACHINE LOCATION: GERMANY PRICE: ON REQUEST FOLDING MACHINE FALTEX LOCATION: GERMANY PRICE: ON REQUEST COLORS
Vendedor: USED Machines
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-number of wheels: 6, lifting capacity: 3500 kg, lifting height: 5500 mm, overhead guard height: 3430 mm fork length: 1380 mm, duplo mast: yes, side-shift: yes, air tyres: yes, full rubber tyres: no, battery charger: no 
NUMBER OF WHEELS: 6, LIFTING CAPACITY: 3500 KG, LIFTING HEIGHT: 5500 MM, OVERHEAD GUARD HEIGHT: 3430 MM FORK LENGTH: 1380 MM, DUPLO MAST: YES, SIDE-SHIFT: YES, AIR TYRES: YES, FULL RUBBER TYRES: NO, BATTERY CHARGER: NO
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-technical data:

-wheel diameter approx.			  300 mm
	-grinding wheel width approx.			    40 mm
	-wheel hole approx.			    	mm
-disc speed approx.				u/min
	-drive 400 v - space requirement approx.	                 b h 600 x 450 x 450 mm
	-weight approx.						    55 kg
 TECHNICAL DATA: -WHEEL DIAMETER APPROX. 300 MM -GRINDING WHEEL WIDTH APPROX. 40 MM -WHEEL HOLE APPROX. MM -DISC SPEED APPROX. U/MIN -DRIVE 400 V - SPACE REQUIREMENT APPROX. B H 600 X 450 X 450 MM -WEIGHT APPROX. 55 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-technical data:

-wheel diameter approx.			  300 mm
	-grinding wheel width approx.			    40 mm
	-wheel hole approx.			    76 mm
-disc speed 2900 rpm
-mot. grinding dust extraction
-working height 1100 mm
-original machine stand
	-drive 400 v / 1,8 kw
	-space requirement approx.	                      b h 800 x 1150 x h 450 mm
	-weight approx.						  150 kg
 TECHNICAL DATA: -WHEEL DIAMETER APPROX. 300 MM -GRINDING WHEEL WIDTH APPROX. 40 MM -WHEEL HOLE APPROX. 76 MM -DISC SPEED 2900 RPM -MOT. GRINDING DUST EXTRACTION -WORKING HEIGHT 1100 MM -ORIGINAL MACHINE STAND -DRIVE 400 V / 1,8 KW -SPACE REQUIREMENT APPROX. B H 800 X 1150 X H 450 MM -WEIGHT APPROX. 150 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-gatherer horizon duplo dc-8<br/>  <br/>  serial-no. 20103713<br/>  8 station friction feeder<br/>  delivery duplo jogger<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test- GATHERER HORIZON DUPLO DC-8

SERIAL-NO. 20103713
8 STATION FRICTION FEEDER
DELIVERY DUPLO JOGGER

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Ubicación: Land-age 1999
1 collating tower with 8 station
lifting unit lu hm
stacker dc 48 st
delivery time: 1 - 2 months
ref: du180176a

please ask for price.

we ship and install worldwide!  AGE 1999 1 COLLATING TOWER WITH 8 STATION LIFTING UNIT LU HM STACKER DC 48 ST DELIVERY TIME: 1 - 2 MONTHS REF: DU180176A PLEASE ASK FOR PRICE. WE SHIP AND INSTALL WORLDWIDE!
Vendedor: Altmann Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer / origin:	duplomat germany (eu)
format (cm): 56 x 42
 MANUFACTURER / ORIGIN: DUPLOMAT GERMANY (EU) FORMAT (CM): 56 X 42
Vendedor: MJS-LINE GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-auction name: printing and bindery machines in de lier


online auction

start of auction: 01 june 2018 17:00 gmt +0200 (western europe (dst)
closing time: 27 june 2018 16:00 gmt +0200 (western europe (dst)

the price listed is an opening bid

to participate in the auction and for more information go to: bva-auctions AUCTION NAME: PRINTING AND BINDERY MACHINES IN DE LIER ONLINE AUCTION START OF AUCTION: 01 JUNE 2018 17:00 GMT +0200 (WESTERN EUROPE (DST) CLOSING TIME: 27 JUNE 2018 16:00 GMT +0200 (WESTERN EUROPE (DST) THE PRICE LISTED IS AN OPENING BID TO PARTICIPATE IN THE AUCTION AND FOR MORE INFORMATION GO TO: BVA-AUCTIONS
Vendedor: BVA Auctions
Año de construcción: usado
Ubicación: Land-polishing & grinding brackets - set - 14-15-002 delivery time: immediate number: 14-15-002 manufacturer: polishing & grinding brackets type: set

machine data built: approx 1980 l x w x h: approx. 400 x 400 x 1000 mm weight: approx. 50 kg

good condition consisting of technical data: 2 x polishing bock 2 x sanding block polishing lathes: 2 piece dietz wrb 80 c 1370 rpm sanding blocks: 1 piece obermoser 1430 rpm / grinding wheel ã? 250 mm 1 piece flott sts 175 1500 rpm / disc ã? 175 mm 

accessories â?¢ 2 piece wheel ã? 250 mm â?¢ 2 piece wheel ã? 175 mm â?¢ 12 pcs washers & brush accessories on request price and more technical data on request POLISHING & GRINDING BRACKETS - SET - 14-15-002 DELIVERY TIME: IMMEDIATE NUMBER: 14-15-002 MANUFACTURER: POLISHING & GRINDING BRACKETS TYPE: SET MACHINE DATA BUILT: APPROX 1980 L X W X H: APPROX. 400 X 400 X 1000 MM WEIGHT: APPROX. 50 KG GOOD CONDITION CONSISTING OF TECHNICAL DATA: 2 X POLISHING BOCK 2 X SANDING BLOCK POLISHING LATHES: 2 PIECE DIETZ WRB 80 C 1370 RPM SANDING BLOCKS: 1 PIECE OBERMOSER 1430 RPM / GRINDING WHEEL &ATILDE;? 250 MM 1 PIECE FLOTT STS 175 1500 RPM / DISC &ATILDE;? 175 MM ACCESSORIES &ACIRC;?&CENT; 2 PIECE WHEEL &ATILDE;? 250 MM &ACIRC;?&CENT; 2 PIECE WHEEL &ATILDE;? 175 MM &ACIRC;?&CENT; 12 PCS WASHERS & BRUSH ACCESSORIES ON REQUEST PRICE AND MORE TECHNICAL DATA ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-doppelschleifblock griffin DOPPELSCHLEIFBLOCK GRIFFIN
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-approx. 1991
20 stations collator, with stiching unit and trimmer
 APPROX. 1991 20 STATIONS COLLATOR, WITH STICHING UNIT AND TRIMMER
Vendedor: AGM Graphische Maschinen
Año de construcción: usado
Ubicación: Land-offer consists of:<br/> <br/> duplo dpb-500<br/> single clamp binder<br/> <br/> advantages:<br/> - suction cover feed<br/> - 4 creasing<br/> - touch screen<br/> - milling/ notching<br/> <br/> technical details:<br/> - cycling speed: 525 books/h<br/> - book thickness: 1-51mm<br/> - book size: min. 120x250mm; max. 360x696mm<br/> - cover weight: 80-302 gsm<br/> - cover pile height: 70mm<br/> - milling depth: max. 4mm<br/> - warm-up time: 45min<br/> - glue temp.: 100-200°c<br/> - power supply: 3 phase, 380-415v/ 50 60hz<br/> - dimension: 928x2790x1343mm<br/> - weight: 695kg; very good  OFFER CONSISTS OF:

DUPLO DPB-500
SINGLE CLAMP BINDER

ADVANTAGES:
- SUCTION COVER FEED
- 4 CREASING
- TOUCH SCREEN
- MILLING/ NOTCHING

TECHNICAL DETAILS:
- CYCLING SPEED: 525 BOOKS/H
- BOOK THICKNESS: 1-51MM
- BOOK SIZE: MIN. 120X250MM; MAX. 360X696MM
- COVER WEIGHT: 80-302 GSM
- COVER PILE HEIGHT: 70MM
- MILLING DEPTH: MAX. 4MM
- WARM-UP TIME: 45MIN
- GLUE TEMP.: 100-200°C
- POWER SUPPLY: 3 PHASE, 380-415V/ 50 60HZ
- DIMENSION: 928X2790X1343MM
- WEIGHT: 695KG; VERY GOOD
Vendedor: LA-POSTPRESS Landauer Alexander
Año de construcción: usado
Ubicación: Land-cincinnati twin conical screw pipes extruder

type cmt 45
construction year 1990 CINCINNATI TWIN CONICAL SCREW PIPES EXTRUDER TYPE CMT 45 CONSTRUCTION YEAR 1990
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Ubicación: Land-cincinnati pipes twin conical screw extruder cmt 45

construction year 1990
cmt 45 counter-rotating conical twin-screw extruder CINCINNATI PIPES TWIN CONICAL SCREW EXTRUDER CMT 45 CONSTRUCTION YEAR 1990 CMT 45 COUNTER-ROTATING CONICAL TWIN-SCREW EXTRUDER
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: 2.450 
Ubicación: Land-we have package for sale :

-presse offset adast 745p : 1990 : dampening standard
-guillotine ftp
-guillotine polar 76
-folding machine guk
-collator duplo system 2000 with finishing line
-numbering and creasin morgana fsn
-stitcher graphat
-binder one clamp jud mr 500
-windmill heidelberg t 

 

price 24500 € closed loading on truck

 

best regards,

 

 

m.mathieu

 

snvi energy graphic

 

achat vente matÉriel industrielle

22 rue du camp 93230 romainville 93230 france

tel : 01 57 14 99 19 / mobile : 06 88 07 09 64 WE HAVE PACKAGE FOR SALE : -PRESSE OFFSET ADAST 745P : 1990 : DAMPENING STANDARD -GUILLOTINE FTP -GUILLOTINE POLAR 76 -FOLDING MACHINE GUK -COLLATOR DUPLO SYSTEM 2000 WITH FINISHING LINE -NUMBERING AND CREASIN MORGANA FSN -STITCHER GRAPHAT -BINDER ONE CLAMP JUD MR 500 -WINDMILL HEIDELBERG T PRICE 24500 € CLOSED LOADING ON TRUCK BEST REGARDS, M.MATHIEU SNVI ENERGY GRAPHIC ACHAT VENTE MATÉRIEL INDUSTRIELLE 22 RUE DU CAMP 93230 ROMAINVILLE 93230 FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)