146 ofertas

Año de construcción: usado
Ubicación: Land-capacity 400 ton
bending lenght 6100 mm
distance between cloumns 5100 mm
throad debth 450 mm
cnc controller cybelec modeva 10s   CAPACITY 400 TON BENDING LENGHT 6100 MM DISTANCE BETWEEN CLOUMNS 5100 MM THROAD DEBTH 450 MM CNC CONTROLLER CYBELEC MODEVA 10S
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Precio: 2.760 €
Ubicación: Land-: 1.300 mm<br/>: 2 mm<br/>: 135 °<br/>: 128 °<br/>: 1.700 mm<br/>: 1.000 mm<br/>: 1.200 mm<br/>: 360 kg<br/>welded steel construction<br/>with segmented inclined upper beam<br/>sectioned beam material c 1050<br/>help cylinder<br/>users manual in german<br/><br/>bending length: 1.300 mm <br/>bending power: 2 mm<br/>max. bending angle with 1,5 mm sheet: 135°<br/>max. bending angle with 2 mm sheet: 128°<br/>length: 1.700 mm <br/>width: 1.000 mm <br/>height: 1.200 mm <br/>weight: 360 kg<br/><br/><br/><br/> : 1.300 MM
: 2 MM
: 135 °
: 128 °
: 1.700 MM
: 1.000 MM
: 1.200 MM
: 360 KG
WELDED STEEL CONSTRUCTION
WITH SEGMENTED INCLINED UPPER BEAM
SECTIONED BEAM MATERIAL C 1050
HELP CYLINDER
USERS MANUAL IN GERMAN

BENDING LENGTH: 1.300 MM
BENDING POWER: 2 MM
MAX. BENDING ANGLE WITH 1,5 MM SHEET: 135°
MAX. BENDING ANGLE WITH 2 MM SHEET: 128°
LENGTH: 1.700 MM
WIDTH: 1.000 MM
HEIGHT: 1.200 MM
WEIGHT: 360 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3100 mm
sheet thickness: 4.0 mm
cutting angle: 1.30 â°
trailing stop: 750 mm
stroke rate: 42 strokes/min
working height: 800 mm

with motorized backgauge

TECHNICAL DATA: CUTTING LENGTH: 3100 MM SHEET THICKNESS: 4.0 MM CUTTING ANGLE: 1.30 &ACIRC;&DEG; TRAILING STOP: 750 MM STROKE RATE: 42 STROKES/MIN WORKING HEIGHT: 800 MM WITH MOTORIZED BACKGAUGE
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Precio: 2.240 €
Ubicación: Land-: 1,5 mm<br/>: 1020 mm<br/>: 1.080 mm<br/>: 1.950 mm<br/>: 1.000 mm<br/>: 1.150 mm<br/>: 420 kg<br/>welded steel construction<br/>with manual hold down unit<br/>back gauge adjustable by handwheel<br/>users manual in english<br/><br/>sheet thickness: 1,5 mm <br/>cutting length: 1.020 mm<br/>back gauge: 0 - 500 mm<br/>blade length: 1.080 mm<br/>length: 1.950 mm <br/>width: 1.000 mm <br/>heigth: 1.150 mm<br/>weight: 420 kg<br/><br/><br/><br/> : 1,5 MM
: 1020 MM
: 1.080 MM
: 1.950 MM
: 1.000 MM
: 1.150 MM
: 420 KG
WELDED STEEL CONSTRUCTION
WITH MANUAL HOLD DOWN UNIT
BACK GAUGE ADJUSTABLE BY HANDWHEEL
USERS MANUAL IN ENGLISH

SHEET THICKNESS: 1,5 MM
CUTTING LENGTH: 1.020 MM
BACK GAUGE: 0 - 500 MM
BLADE LENGTH: 1.080 MM
LENGTH: 1.950 MM
WIDTH: 1.000 MM
HEIGTH: 1.150 MM
WEIGHT: 420 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3006 mm
sheet thickness: 6,0 mm
cutting angle: 1.30 â°
back gauge: 1000 mm
stroke rate: 15 strokes
working height: 865 mm

motorised backgauge with nc control d-touch 7

TECHNICAL DATA: CUTTING LENGTH: 3006 MM SHEET THICKNESS: 6,0 MM CUTTING ANGLE: 1.30 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 15 STROKES WORKING HEIGHT: 865 MM MOTORISED BACKGAUGE WITH NC CONTROL D-TOUCH 7
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Precio: 15.360 €
Ubicación: Land-: 80x40x4 mm<br/>: 70x70x4 mm<br/>: 85 mm<br/>: 247 mm<br/>: 7,5 kw<br/>: 1.580 mm<br/>: 1.200 mm<br/>: 1.410 mm<br/>: 2.350 kg<br/>3 driven rolls (hydromotor and planetary gear) <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions<br/>plane rolls <br/>lateral rolls (forward-backward hydraulic, rest manual)<br/>horizontal and vertical operation <br/>double foot pedal for- and backward drive <br/> machine and equipment according to the ce regulations<br/>incl. option: continuous speed<br/><br/>we have more than 235 references!<br/><br/>performances:	<br/>flat steel vertical position: 80x20 mm / 500 mm, 30x10 mm / 350 mm<br/>flat steel horizontal position: 120x30 mm / 650 mm, 50x10 mm / 300 mm<br/>square bar: 50x50 mm / 500 mm, 30x30 mm / 350 mm<br/>round bar: Ø 50 mm / 500 mm, Ø 20 mm / 350 mm<br/>tube: Ø 100x2,5 mm / 1.300 mm, Ø 20x1 / 300 mm<br/>form tube vertical position: 80x40x4 mm<br/>form tube square: 70x70x4 mm<br/>angle leg outside: 80x8 mm / 1.200 mm, 30x3 mm / 450 mm<br/>angle leg inside: 80x8 mm / 800 mm, 30x3 mm / 450 mm<br/>shaft diameter: 85 mm<br/>roll diameter: 247 mm<br/>driven rolls: 3<br/>motor power: 7,5 kw<br/>length: 1.580 mm<br/>width: 1.200 mm<br/>heigth: 1.410 mm<br/>weight: 2.350 kg<br/><br/><br/><br/> : 80X40X4 MM
: 70X70X4 MM
: 85 MM
: 247 MM
: 7,5 KW
: 1.580 MM
: 1.200 MM
: 1.410 MM
: 2.350 KG
3 DRIVEN ROLLS (HYDROMOTOR AND PLANETARY GEAR)
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS
PLANE ROLLS 
LATERAL ROLLS (FORWARD-BACKWARD HYDRAULIC, REST MANUAL)
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS
INCL. OPTION: CONTINUOUS SPEED

WE HAVE MORE THAN 235 REFERENCES!

PERFORMANCES:
FLAT STEEL VERTICAL POSITION: 80X20 MM / 500 MM, 30X10 MM / 350 MM
FLAT STEEL HORIZONTAL POSITION: 120X30 MM / 650 MM, 50X10 MM / 300 MM
SQUARE BAR: 50X50 MM / 500 MM, 30X30 MM / 350 MM
ROUND BAR: Ø 50 MM / 500 MM, Ø 20 MM / 350 MM
TUBE: Ø 100X2,5 MM / 1.300 MM, Ø 20X1 / 300 MM
FORM TUBE VERTICAL POSITION: 80X40X4 MM
FORM TUBE SQUARE: 70X70X4 MM
ANGLE LEG OUTSIDE: 80X8 MM / 1.200 MM, 30X3 MM / 450 MM
ANGLE LEG INSIDE: 80X8 MM / 800 MM, 30X3 MM / 450 MM
SHAFT DIAMETER: 85 MM
ROLL DIAMETER: 247 MM
DRIVEN ROLLS: 3
MOTOR POWER: 7,5 KW
LENGTH: 1.580 MM
WIDTH: 1.200 MM
HEIGTH: 1.410 MM
WEIGHT: 2.350 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 54.000 €
Ubicación: Land-technical data:

pressure capacity: 135 t
bending length: 3050 mm
stand width: 2600 mm
stand throat depth: 410 mm
max stroke length: 254 mm
installation height: 530 mm
travel - x-axis: 650 mm
travel - r axis: 250 mm

with control cybelec modeva 15t of following axes:
y1, y2, x, r, with compl. set of tools, one. fiessler
light barrier system, mot. table crowning wila,
back stop adjustment 650 mm, quick-release
device for upper tool 50.551 and 1 set
standard tools 
 TECHNICAL DATA: PRESSURE CAPACITY: 135 T BENDING LENGTH: 3050 MM STAND WIDTH: 2600 MM STAND THROAT DEPTH: 410 MM MAX STROKE LENGTH: 254 MM INSTALLATION HEIGHT: 530 MM TRAVEL - X-AXIS: 650 MM TRAVEL - R AXIS: 250 MM WITH CONTROL CYBELEC MODEVA 15T OF FOLLOWING AXES: Y1, Y2, X, R, WITH COMPL. SET OF TOOLS, ONE. FIESSLER LIGHT BARRIER SYSTEM, MOT. TABLE CROWNING WILA, BACK STOP ADJUSTMENT 650 MM, QUICK-RELEASE DEVICE FOR UPPER TOOL 50.551 AND 1 SET STANDARD TOOLS
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure:  t<br/>chamfer lenght:  mm<br/>distance between columns:  mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    200 to<br/>bending beam (y-axis):  <br/>- stroke:    210 mm<br/>dimensions / weights:  <br/>- space requirements -left/right-:   2250 mm<br/>- space requirements -front/back-:   5100 mm<br/>- total height:   2900 mm<br/>- total weight approx.:  14000 kg<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 200 TO
BENDING BEAM (Y-AXIS):
- STROKE: 210 MM
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 2250 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 5100 MM
- TOTAL HEIGHT: 2900 MM
- TOTAL WEIGHT APPROX.: 14000 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-press brake / durma ad-s 40320
size: 5300 x 1910 x 3230 mm (l, w, h)
pressing force: 320 to
year of constr.: 2015
condition: very good, full function PRESS BRAKE / DURMA AD-S 40320 SIZE: 5300 X 1910 X 3230 MM (L, W, H) PRESSING FORCE: 320 TO YEAR OF CONSTR.: 2015 CONDITION: VERY GOOD, FULL FUNCTION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-sheet width:  mm<br/>plate thickness:  mm<br/>distance between columns:  mm<br/>--------------------------------------------------:  <br/>technical specification:  <br/>- working length:   3100 mm<br/>- plate thickness (max.):     10 mm<br/>- stroke rate:     10 /min<br/>dimensions / weights:  <br/>- space requirements -left/right-:   3800 mm<br/>- space requirements -front/back-:   3600 mm<br/>- total height:   2200 mm<br/>- total weight approx.:  10500 kg<br/><br/><br/><br/><br/> SHEET WIDTH: MM
PLATE THICKNESS: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
TECHNICAL SPECIFICATION:
- WORKING LENGTH: 3100 MM
- PLATE THICKNESS (MAX.): 10 MM
- STROKE RATE: 10 /MIN
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 3800 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 3600 MM
- TOTAL HEIGHT: 2200 MM
- TOTAL WEIGHT APPROX.: 10500 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 2550 mm - max cutting capacity st 40 2.5 mm
	-cutting angle 1.30 â°
	-positioning-controlled rear gauge 20-750 mm
	-front angle stop + support arms
	-stroke rate depending on the length to 34 per/min
	-400 v / 3 kw
	-height approx.					  850 mm
-space requirement incl. backgauge, without front support arms
	-about 	            b h 3250 x 1250 x 2000 mm
	-weight approx.				  	 1500 kg
	-with:-control d-touch 7
			-pneum.. supported sheet metal retaining
-e-foot - switch 
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 2550 MM - MAX CUTTING CAPACITY ST 40 2.5 MM -CUTTING ANGLE 1.30 &ACIRC;&DEG; -POSITIONING-CONTROLLED REAR GAUGE 20-750 MM -FRONT ANGLE STOP + SUPPORT ARMS -STROKE RATE DEPENDING ON THE LENGTH TO 34 PER/MIN -400 V / 3 KW -HEIGHT APPROX. 850 MM -SPACE REQUIREMENT INCL. BACKGAUGE, WITHOUT FRONT SUPPORT ARMS -ABOUT B H 3250 X 1250 X 2000 MM -WEIGHT APPROX. 1500 KG -WITH:-CONTROL D-TOUCH 7 -PNEUM.. SUPPORTED SHEET METAL RETAINING -E-FOOT - SWITCH
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-pressure: 040 t<br/>chamfer lenght: 1240 mm<br/>distance between columns:  mm<br/>upper beam stroke: 160 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>- tool clamping mechanical type amada<br/>- 2 fingers backgauge with programmable r + x axis<br/>- cybelec control dnc880s<br/>- safety device fiessler akas -lc ii<br/>- hour counter 3123 hours / stroke counter 328 596<br/>- condition very well - no tools here<br/><br/><br/><br/><br/> PRESSURE: 040 T
CHAMFER LENGHT: 1240 MM
DISTANCE BETWEEN COLUMNS: MM
UPPER BEAM STROKE: 160 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
- TOOL CLAMPING MECHANICAL TYPE AMADA
- 2 FINGERS BACKGAUGE WITH PROGRAMMABLE R + X AXIS
- CYBELEC CONTROL DNC880S
- SAFETY DEVICE FIESSLER AKAS -LC II
- HOUR COUNTER 3123 HOURS / STROKE COUNTER 328 596
- CONDITION VERY WELL - NO TOOLS HERE




Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, by prior agreement the possibility of testing. THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-pressure:        t<br/>chamfer lenght:  mm<br/>distance between columns:        mm<br/>--------------------------------------------------:  <br/>working range press brake:  <br/>- total force (nominal):    120 to<br/>- working length:   3050 mm<br/>bending beam (y-axis):  <br/>- stroke:    175 mm<br/>attachments -press brake-:  <br/>- european ce standards: yes:        <br/>electrical specifications:  <br/>- total power consumption:     15 kw<br/>dimensions / weights:  <br/>- space requirements -left/right-:   4250 mm<br/>- space requirements -front/back-:   2170 mm<br/>- total height:   2800 mm<br/>- total weight approx.:   9500 kg<br/><br/><br/><br/><br/> PRESSURE: T
CHAMFER LENGHT: MM
DISTANCE BETWEEN COLUMNS: MM
--------------------------------------------------:
WORKING RANGE PRESS BRAKE:
- TOTAL FORCE (NOMINAL): 120 TO
- WORKING LENGTH: 3050 MM
BENDING BEAM (Y-AXIS):
- STROKE: 175 MM
ATTACHMENTS -PRESS BRAKE-:
- EUROPEAN CE STANDARDS: YES:
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 15 KW
DIMENSIONS / WEIGHTS:
- SPACE REQUIREMENTS -LEFT/RIGHT-: 4250 MM
- SPACE REQUIREMENTS -FRONT/BACK-: 2170 MM
- TOTAL HEIGHT: 2800 MM
- TOTAL WEIGHT APPROX.: 9500 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-rated forming force: 255 t table length: 3750 mm
the machine is in good technical condition, by prior arrangement, the opportunity to test. RATED FORMING FORCE: 255 T TABLE LENGTH: 3750 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR ARRANGEMENT, THE OPPORTUNITY TO TEST.
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-: 3 mm<br/>: 2.050 mm<br/>: 2,2 °<br/>: 35 1/ min<br/>: 3 kw<br/>: 550 mm<br/>: 850 mm<br/>: 2.400 mm<br/>: 1.350 mm<br/>: 1.200 mm<br/>: 1.300 kg<br/>man. back gauge up to 550 mm scale<br/>security light beam at the back side <br/>automatic sheet hold down <br/>hold down with rubber pads <br/>1 squaring arm <br/>2 off sheet supporting arms <br/>moveable foot switch <br/> user manual in german and english <br/><br/>(sample photo shows mod. ms 1303)<br/><br/>option:<br/><br/>mot. back gauge with digital readout ? 1.760,--<br/><br/>we have more than 330 references!<br/><br/>sheet thickness: 3 mm <br/>cutting length: 2.050 mm <br/>cutting angle: 2,2°<br/>strokes: 35 1/min<br/>back gauge: manual <br/>motor power: 3 kw <br/>back gauge range: 550 mm <br/>table height: 850 mm <br/>length: 2.400 mm <br/>width: 1.350 mm <br/>heigth: 1.200 mm<br/>weight: 1.300 kg<br/><br/><br/><br/> : 3 MM
: 2.050 MM
: 2,2 °
: 35 1/ MIN
: 3 KW
: 550 MM
: 850 MM
: 2.400 MM
: 1.350 MM
: 1.200 MM
: 1.300 KG
MAN. BACK GAUGE UP TO 550 MM SCALE
SECURITY LIGHT BEAM AT THE BACK SIDE
AUTOMATIC SHEET HOLD DOWN 
HOLD DOWN WITH RUBBER PADS 
1 SQUARING ARM 
2 OFF SHEET SUPPORTING ARMS 
MOVEABLE FOOT SWITCH 
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. MS 1303)

OPTION:

MOT. BACK GAUGE WITH DIGITAL READOUT ? 1.760,--

WE HAVE MORE THAN 330 REFERENCES!

SHEET THICKNESS: 3 MM
CUTTING LENGTH: 2.050 MM
CUTTING ANGLE: 2,2°
STROKES: 35 1/MIN
BACK GAUGE: MANUAL
MOTOR POWER: 3 KW
BACK GAUGE RANGE: 550 MM
TABLE HEIGHT: 850 MM
LENGTH: 2.400 MM
WIDTH: 1.350 MM
HEIGTH: 1.200 MM
WEIGHT: 1.300 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: durma
model: iw 110/180 btd
application type: shearing
machine type: shearing machine
availability: immediately
construction year: 2015
production hours: 300
location: czech republic
origin country: turkey

general data:
measurements width: 2560 mm
measurements depth: 1000 mm
measurements height: 2280 mm
machine weight: 3600 kg

main drive:
shearing force: 1800 kn

max material thickness:
steel: 20 mm

media:
main electronic connector: 400 v / 50 hz

additional equipment:
1-	u profile cutting equipment 160 mm
2-	t profile cutting equipment 60 mm
3-	i profile cutting equipment 160 mm
4-	punching equipment diameter 160 mm


see full technical specifications of this machine at:
abc://bit.ly/2qmn30j
 OVERVIEW: BRAND: DURMA MODEL: IW 110/180 BTD APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2015 PRODUCTION HOURS: 300 LOCATION: CZECH REPUBLIC ORIGIN COUNTRY: TURKEY GENERAL DATA: MEASUREMENTS WIDTH: 2560 MM MEASUREMENTS DEPTH: 1000 MM MEASUREMENTS HEIGHT: 2280 MM MACHINE WEIGHT: 3600 KG MAIN DRIVE: SHEARING FORCE: 1800 KN MAX MATERIAL THICKNESS: STEEL: 20 MM MEDIA: MAIN ELECTRONIC CONNECTOR: 400 V / 50 HZ ADDITIONAL EQUIPMENT: 1- U PROFILE CUTTING EQUIPMENT 160 MM 2- T PROFILE CUTTING EQUIPMENT 60 MM 3- I PROFILE CUTTING EQUIPMENT 160 MM 4- PUNCHING EQUIPMENT DIAMETER 160 MM SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QMN30J
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 51.400 €
Ubicación: Land-: 2.050 mm<br/>: 40 to<br/>: 2.050 mm<br/>: 200 mm<br/>: 400 mm<br/>: 900 mm<br/>: 650 mm<br/>: 250 mm<br/>: 6,2 kw<br/>: 2.870 mm<br/>: 1.625 mm<br/>: 2.700 mm<br/>: 5.100 kg<br/>- servo motoric drive of upper beam for highest speeds and energy efficiency<br/>- higher back gauge speed<br/>- high grade 3d colour display control<br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 15t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic, incl. d-bend cad/cam software<br/>back gauge driven by servomotors on linear guiding and ball screw<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge x1, x2, delta x, r1, r2, z1, z2<br/>hydr. upper- and lower tool clamping for wila tools<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>(photo shows following options: delem da-69t control and wila tool clamping)<br/><br/><br/>bending length: 2.050 mm<br/>bending force: 40 to<br/>distance between columns: 2.050 mm<br/>stroke: 200 mm<br/>daylight: 400 mm<br/>working height: 900 mm<br/>axis:	y1 / y2, x und r axes<br/>approach speed: 180 mm/sek.<br/>return speed: 180 mm/sek.<br/>bending speed: 10 mm/sek.<br/>back gauge x axis range: 650 mm<br/>back gauge r axis range: 250 mm<br/>back gauge speed: 500 mm/sec<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>servo motor quantity: 2<br/>total motor power: 6,2 kw<br/>length: 2.870 mm<br/>width: 1.625 mm<br/>height: 2.700 mm<br/>weight: 5.100 kg<br/><br/><br/><br/> : 2.050 MM
: 40 TO
: 2.050 MM
: 200 MM
: 400 MM
: 900 MM
: 650 MM
: 250 MM
: 6,2 KW
: 2.870 MM
: 1.625 MM
: 2.700 MM
: 5.100 KG
- SERVO MOTORIC DRIVE OF UPPER BEAM FOR HIGHEST SPEEDS AND ENERGY EFFICIENCY
- HIGHER BACK GAUGE SPEED
- HIGH GRADE 3D COLOUR DISPLAY CONTROL


STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 15T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC, INCL. D-BEND CAD/CAM SOFTWARE
BACK GAUGE DRIVEN BY SERVOMOTORS ON LINEAR GUIDING AND BALL SCREW
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE X1, X2, DELTA X, R1, R2, Z1, Z2
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

(PHOTO SHOWS FOLLOWING OPTIONS: DELEM DA-69T CONTROL AND WILA TOOL CLAMPING)


BENDING LENGTH: 2.050 MM
BENDING FORCE: 40 TO
DISTANCE BETWEEN COLUMNS: 2.050 MM
STROKE: 200 MM
DAYLIGHT: 400 MM
WORKING HEIGHT: 900 MM
AXIS: Y1 / Y2, X UND R AXES
APPROACH SPEED: 180 MM/SEK.
RETURN SPEED: 180 MM/SEK.
BENDING SPEED: 10 MM/SEK.
BACK GAUGE X AXIS RANGE: 650 MM
BACK GAUGE R AXIS RANGE: 250 MM
BACK GAUGE SPEED: 500 MM/SEC
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
SERVO MOTOR QUANTITY: 2
TOTAL MOTOR POWER: 6,2 KW
LENGTH: 2.870 MM
WIDTH: 1.625 MM
HEIGHT: 2.700 MM
WEIGHT: 5.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
	-pressure capacity 160 t
	-working width 3100 mm
	-clearance between the stands 2550 mm
	-table width 405 mm
	-throat depth 350 mm
	-height approx.					  240 mm
	-stroke 175 mm
	-working height approx.					  865 mm
	-motor power approx.					    15 kw
	-oil approx.					  300 l
	-space requirement approx.           b h 4250 x 2700 x 1900 mm
	-weight approx.				             9500 kg
	-with: - swivel arm - control panel with digital display
-mot. backgauge - 4-way universal die - split foot tool
-two hand control panel with footswitch, 
 TECHNICAL DATA: -PRESSURE CAPACITY 160 T -WORKING WIDTH 3100 MM -CLEARANCE BETWEEN THE STANDS 2550 MM -TABLE WIDTH 405 MM -THROAT DEPTH 350 MM -HEIGHT APPROX. 240 MM -STROKE 175 MM -WORKING HEIGHT APPROX. 865 MM -MOTOR POWER APPROX. 15 KW -OIL APPROX. 300 L -SPACE REQUIREMENT APPROX. B H 4250 X 2700 X 1900 MM -WEIGHT APPROX. 9500 KG -WITH: - SWIVEL ARM - CONTROL PANEL WITH DIGITAL DISPLAY -MOT. BACKGAUGE - 4-WAY UNIVERSAL DIE - SPLIT FOOT TOOL -TWO HAND CONTROL PANEL WITH FOOTSWITCH,
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 23.300 €
Ubicación: Land-: 100x50x6 mm<br/>: 80x80x5 mm<br/>: 110-100 mm<br/>: 315 mm<br/>: 11 kw<br/>: 1.750 mm<br/>: 1.340 mm<br/>: 1.650 mm<br/>: 3.360 kg<br/>3 driven rolls (hydromotor and planetary gear) <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions<br/>plane rolls <br/>lateral rolls (forward-backward hydraulic, rest manual)<br/>horizontal and vertical operation <br/>double foot pedal for- and backward drive <br/> machine and equipment according to the ce regulations<br/><br/>we have more than 235 references!<br/><br/>performances:	<br/>flat steel vertical position: 100x25 mm / 1.500 mm, 40x10 mm / 400 mm<br/>flat steel horizontal position: 180x35 mm / 900 mm, 60x10 mm / 400 mm<br/>square bar: 60x60 mm / 700 mm, 30x30 mm / 400 mm<br/>round bar: Ø 70 mm / 800 mm, Ø 30 mm / 400 mm<br/>tube: Ø 120x2,5 mm / 1.400 mm, Ø 30x2 / 400 mm<br/>form tube vertical position: 100x50x6 mm<br/>form tube square: 80x80x5 mm<br/>angle leg outside: 100x12 mm / 1.600 mm, 40x4 mm / 700 mm<br/>angle leg inside: 100x10 mm / 1.400 mm, 40x4 mm / 700 mm<br/>shaft diameter: 110-100 mm<br/>roll diameter: 315 mm<br/>driven rolls: 3<br/>motor power: 11 kw<br/>length: 1.750 mm<br/>width: 1.340 mm<br/>heigth: 1.650 mm<br/>weight: 3.360 kg<br/><br/><br/><br/> : 100X50X6 MM
: 80X80X5 MM
: 110-100 MM
: 315 MM
: 11 KW
: 1.750 MM
: 1.340 MM
: 1.650 MM
: 3.360 KG
3 DRIVEN ROLLS (HYDROMOTOR AND PLANETARY GEAR)
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS
PLANE ROLLS 
LATERAL ROLLS (FORWARD-BACKWARD HYDRAULIC, REST MANUAL)
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 235 REFERENCES!

PERFORMANCES:
FLAT STEEL VERTICAL POSITION: 100X25 MM / 1.500 MM, 40X10 MM / 400 MM
FLAT STEEL HORIZONTAL POSITION: 180X35 MM / 900 MM, 60X10 MM / 400 MM
SQUARE BAR: 60X60 MM / 700 MM, 30X30 MM / 400 MM
ROUND BAR: Ø 70 MM / 800 MM, Ø 30 MM / 400 MM
TUBE: Ø 120X2,5 MM / 1.400 MM, Ø 30X2 / 400 MM
FORM TUBE VERTICAL POSITION: 100X50X6 MM
FORM TUBE SQUARE: 80X80X5 MM
ANGLE LEG OUTSIDE: 100X12 MM / 1.600 MM, 40X4 MM / 700 MM
ANGLE LEG INSIDE: 100X10 MM / 1.400 MM, 40X4 MM / 700 MM
SHAFT DIAMETER: 110-100 MM
ROLL DIAMETER: 315 MM
DRIVEN ROLLS: 3
MOTOR POWER: 11 KW
LENGTH: 1.750 MM
WIDTH: 1.340 MM
HEIGTH: 1.650 MM
WEIGHT: 3.360 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: durma
model: hap 30200
application type: bending
machine type: bending machine
availability: immediately
construction year: 2006
production hours: 36000
location: turkey
origin country: turkey

general data:
measurements width: 2400 mm
measurements depth: 4270 mm
measurements height: 2850 mm
machine weight: 11300 kg

main drive:
pressing force: 200 kn
bending length: 3050 mm

control unit:
brand: durma
model: erd 110

additional equipment:
1 - laser front guards OVERVIEW: BRAND: DURMA MODEL: HAP 30200 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2006 PRODUCTION HOURS: 36000 LOCATION: TURKEY ORIGIN COUNTRY: TURKEY GENERAL DATA: MEASUREMENTS WIDTH: 2400 MM MEASUREMENTS DEPTH: 4270 MM MEASUREMENTS HEIGHT: 2850 MM MACHINE WEIGHT: 11300 KG MAIN DRIVE: PRESSING FORCE: 200 KN BENDING LENGTH: 3050 MM CONTROL UNIT: BRAND: DURMA MODEL: ERD 110 ADDITIONAL EQUIPMENT: 1 - LASER FRONT GUARDS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 42.840 €
Ubicación: Land-: 2.050 mm<br/>: 60 to<br/>: 7,5 kw<br/>: 1.700 mm<br/>: 400 mm<br/>: 104 mm<br/>: 900 mm<br/>: 350 mm<br/>: 650 mm<br/>: 100 lt<br/>: 3.200 mm<br/>: 1.200 mm<br/>: 2.350 mm<br/>: 3.550 kg<br/>4 axes (y1, y2, x and r axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8 sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t ? 5.750,-   cnc controlled r-axis ? 5.550,-<br/>(included)   cnc crowning table ? 1.390,-<br/>(included)   quick connecting terminals for the upper tool ? 330,-   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 2.050 mm <br/>bending force: 60 to <br/>axis: 4 (y1, y2, x, r) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 7,5 kw <br/>distance between columns: 1.700 mm <br/>daylight: 400 mm <br/>table width: 104 mm <br/>table height: 900 mm <br/>throat depth: 350 mm <br/>travel of back gauge (x): 650 mm <br/>oiltank: 100 lt<br/>length: 3.200 mm <br/>width: 1.200 mm <br/>height: 2.350 mm <br/>weight: 3.550 kg<br/><br/><br/><br/> : 2.050 MM
: 60 TO
: 7,5 KW
: 1.700 MM
: 400 MM
: 104 MM
: 900 MM
: 350 MM
: 650 MM
: 100 LT
: 3.200 MM
: 1.200 MM
: 2.350 MM
: 3.550 KG
4 AXES (Y1, Y2, X AND R AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8 SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)


OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T ? 5.750,- CNC CONTROLLED R-AXIS ? 5.550,-
(INCLUDED) CNC CROWNING TABLE ? 1.390,-
(INCLUDED) QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 330,- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 2.050 MM
BENDING FORCE: 60 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 7,5 KW
DISTANCE BETWEEN COLUMNS: 1.700 MM
DAYLIGHT: 400 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 350 MM
TRAVEL OF BACK GAUGE (X): 650 MM
OILTANK: 100 LT
LENGTH: 3.200 MM
WIDTH: 1.200 MM
HEIGHT: 2.350 MM
WEIGHT: 3.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-durmazlar swivel bending machine

-capaciteit 2020 x 2 mm
-hoek instelbare
-automatic functie
-voetbediening
-noodstop 2 x
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) DURMAZLAR SWIVEL BENDING MACHINE -CAPACITEIT 2020 X 2 MM -HOEK INSTELBARE -AUTOMATIC FUNCTIE -VOETBEDIENING -NOODSTOP 2 X -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: 19.600 €
Ubicación: Land-: 4 mm<br/>: 3000 mm<br/>: 1,5 °<br/>: 42 1/ min<br/>: 7,5 kw<br/>: 3.650 mm<br/>: 2.260 mm<br/>: 1.330 mm<br/>: 3.600 kg<br/>mot. back gauge up to 750 mm and digital readout<br/>security light beam at the back side<br/>balls in table<br/>automatic sheet hold down <br/>hold down with rubber pads <br/>1 squaring arm <br/>2 off sheet supporting arms <br/>moveable foot switch <br/> user manual in german and english <br/><br/>options: <br/><br/>dt7 pre-selection control  ? 980,--<br/>pneumatic sheet support  ? 3.600,--<br/><br/>we have more than 330 references!<br/><br/><br/><br/><br/>sheet thickness: 4 mm <br/>cutting length: 3000 mm <br/>cutting angle: 1,5°<br/>strokes: 42 1/min<br/>back gauge: 750 mm motorized <br/>motor power: 7,5 kw <br/>length: 3.650 mm <br/>width: 2.260 mm <br/>heigth: 1.330 mm <br/>weight: 3.600 kg<br/><br/><br/><br/> : 4 MM
: 3000 MM
: 1,5 °
: 42 1/ MIN
: 7,5 KW
: 3.650 MM
: 2.260 MM
: 1.330 MM
: 3.600 KG
MOT. BACK GAUGE UP TO 750 MM AND DIGITAL READOUT
SECURITY LIGHT BEAM AT THE BACK SIDE
BALLS IN TABLE
AUTOMATIC SHEET HOLD DOWN 
HOLD DOWN WITH RUBBER PADS 
1 SQUARING ARM 
2 OFF SHEET SUPPORTING ARMS 
MOVEABLE FOOT SWITCH 
USER MANUAL IN GERMAN AND ENGLISH

OPTIONS:

DT7 PRE-SELECTION CONTROL  ? 980,--
PNEUMATIC SHEET SUPPORT  ? 3.600,--

WE HAVE MORE THAN 330 REFERENCES!




SHEET THICKNESS: 4 MM
CUTTING LENGTH: 3000 MM
CUTTING ANGLE: 1,5°
STROKES: 42 1/MIN
BACK GAUGE: 750 MM MOTORIZED
MOTOR POWER: 7,5 KW
LENGTH: 3.650 MM
WIDTH: 2.260 MM
HEIGTH: 1.330 MM
WEIGHT: 3.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: durma
model: ad-s 30135
application type: bending
machine type: bending machine
availability: immediately
construction year: 2014
production hours: 9063
location: turkey
origin country: turkey

general data:
measurements width: 1900 mm
measurements depth: 4500 mm
measurements height: 2900 mm
machine weight: 10500 kg

main drive:
pressing force: 135 kn
bending length: 3015 mm

control unit:
brand: cybelec
model: modeva ra
cnc main language: english
cnc language customizable: yes

media:
main electronic connection: 400 v / 50 hz 
power consumption: 15 kva
  OVERVIEW: BRAND: DURMA MODEL: AD-S 30135 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2014 PRODUCTION HOURS: 9063 LOCATION: TURKEY ORIGIN COUNTRY: TURKEY GENERAL DATA: MEASUREMENTS WIDTH: 1900 MM MEASUREMENTS DEPTH: 4500 MM MEASUREMENTS HEIGHT: 2900 MM MACHINE WEIGHT: 10500 KG MAIN DRIVE: PRESSING FORCE: 135 KN BENDING LENGTH: 3015 MM CONTROL UNIT: BRAND: CYBELEC MODEL: MODEVA RA CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MEDIA: MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ POWER CONSUMPTION: 15 KVA
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 97.200 €
Ubicación: Land-: 4.050 mm<br/>: 320 to<br/>: 37 kw<br/>: 3.600 mm<br/>: 630 mm<br/>: 154 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 5.300 mm<br/>: 1.910 mm<br/>: 3.230 mm<br/>: 21.000 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm<br/>bending force: 320 to<br/>axis:	y1 / y2 / x and r axes<br/>upper tool:	75° goose neck, sectioned<br/>lower tool:	4-v die 16,22,35 und 50 mm<br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc conrolled<br/>motor power: 37 kw<br/>distance between columns: 	3.600 mm<br/>daylight: 630 mm<br/>table width: 154 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 5.300 mm<br/>width: 1.910 mm<br/>height: 3.230 mm<br/>weight: 21.000 kg<br/><br/><br/><br/> : 4.050 MM
: 320 TO
: 37 KW
: 3.600 MM
: 630 MM
: 154 MM
: 900 MM
: 410 MM
: 650 MM
: 5.300 MM
: 1.910 MM
: 3.230 MM
: 21.000 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 4.050 MM
BENDING FORCE: 320 TO
AXIS: Y1 / Y2 / X AND R AXES
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16,22,35 UND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 37 KW
DISTANCE BETWEEN COLUMNS: 3.600 MM
DAYLIGHT: 630 MM
TABLE WIDTH: 154 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 5.300 MM
WIDTH: 1.910 MM
HEIGHT: 3.230 MM
WEIGHT: 21.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
	-pressure capacity 120 t
	-working width 3020 mm
	-clearance between the stands 2530 mm
	-table width 220 mm
	-throat depth 240 mm
	-height approx.					  400 mm
	-stroke 160 mm
	-working height 900 mm
	-motor power approx.					    11 kw
	-oil approx.					  300 l
	-space requirement approx.       b h 3250 x 2700 x 1900 mm
	-weight approx.				            9000 kg
	-with: - swivel arm - control panel - digital displays for offset + backgauge
-mot. backgauge - universal matrix, divided pointed tool - two hand control console, footswitch, support arms
 TECHNICAL DATA: -PRESSURE CAPACITY 120 T -WORKING WIDTH 3020 MM -CLEARANCE BETWEEN THE STANDS 2530 MM -TABLE WIDTH 220 MM -THROAT DEPTH 240 MM -HEIGHT APPROX. 400 MM -STROKE 160 MM -WORKING HEIGHT 900 MM -MOTOR POWER APPROX. 11 KW -OIL APPROX. 300 L -SPACE REQUIREMENT APPROX. B H 3250 X 2700 X 1900 MM -WEIGHT APPROX. 9000 KG -WITH: - SWIVEL ARM - CONTROL PANEL - DIGITAL DISPLAYS FOR OFFSET + BACKGAUGE -MOT. BACKGAUGE - UNIVERSAL MATRIX, DIVIDED POINTED TOOL - TWO HAND CONTROL CONSOLE, FOOTSWITCH, SUPPORT ARMS
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 27.200 €
Ubicación: Land-: 6 mm<br/>: 3.100 mm<br/>: 1,5 °<br/>: 1.000 motorisch  mm<br/>: 15 kw<br/>: 4.180 mm<br/>: 2.400 mm<br/>: 2.000 mm<br/>: 7.650 kg<br/>swing cut construction<br/>nc-preselection system d-touch 7 with touch screen for back gauge, cutting length, quantity, usb port<br/>motorized back gauge 1000 mm on ball screws, folding upwards<br/>clear control panel mounted on moveable arm <br/>hydraulic hold down pistons are arranged close to the cutting edge <br/>foot switch <br/>central, manual blade gap adjustment <br/>cutting line illumination <br/>broad table with balls<br/>piece counter<br/>single and continous stoke<br/>fold up finger guard 1.000 mm<br/>1 squaring arm 1. 500 mm with scale, t-slot and tilting cam <br/>2 supporting arms 1.000 mm with t-slot<br/>simple replacement and grinding of the blades <br/>variable adjustable cutting length for economic processing <br/>lower blade fourfold turnable <br/>upper blade double turnable <br/>oilfilling<br/>light barrier on the back of the machine<br/>qualified customer support <br/> user manual in german and english<br/>machine in conformity with ce-regulations<br/><br/>we have more than 850 references!<br/><br/>sheet thickness: 6 mm<br/>cutting length: 3.100 mm<br/>cutting angle: 1,5°<br/>back gauge: motorized 1.000 mm<br/>motor power: 15 kw<br/>length:4.180 mm<br/>width: 2.400 mm<br/>heigth: 2.000 mm<br/>weight: 7.650 kg<br/><br/><br/><br/> : 6 MM
: 3.100 MM
: 1,5 °
: 1.000 MOTORISCH MM
: 15 KW
: 4.180 MM
: 2.400 MM
: 2.000 MM
: 7.650 KG
SWING CUT CONSTRUCTION
NC-PRESELECTION SYSTEM D-TOUCH 7 WITH TOUCH SCREEN FOR BACK GAUGE, CUTTING LENGTH, QUANTITY, USB PORT
MOTORIZED BACK GAUGE 1000 MM ON BALL SCREWS, FOLDING UPWARDS
CLEAR CONTROL PANEL MOUNTED ON MOVEABLE ARM 
HYDRAULIC HOLD DOWN PISTONS ARE ARRANGED CLOSE TO THE CUTTING EDGE 
FOOT SWITCH 
CENTRAL, MANUAL BLADE GAP ADJUSTMENT 
CUTTING LINE ILLUMINATION 
BROAD TABLE WITH BALLS
PIECE COUNTER
SINGLE AND CONTINOUS STOKE
FOLD UP FINGER GUARD 1.000 MM
1 SQUARING ARM 1. 500 MM WITH SCALE, T-SLOT AND TILTING CAM 
2 SUPPORTING ARMS 1.000 MM WITH T-SLOT
SIMPLE REPLACEMENT AND GRINDING OF THE BLADES 
VARIABLE ADJUSTABLE CUTTING LENGTH FOR ECONOMIC PROCESSING 
LOWER BLADE FOURFOLD TURNABLE 
UPPER BLADE DOUBLE TURNABLE
OILFILLING
LIGHT BARRIER ON THE BACK OF THE MACHINE
QUALIFIED CUSTOMER SUPPORT 
USER MANUAL IN GERMAN AND ENGLISH
MACHINE IN CONFORMITY WITH CE-REGULATIONS

WE HAVE MORE THAN 850 REFERENCES!

SHEET THICKNESS: 6 MM
CUTTING LENGTH: 3.100 MM
CUTTING ANGLE: 1,5°
BACK GAUGE: MOTORIZED 1.000 MM
MOTOR POWER: 15 KW
LENGTH:4.180 MM
WIDTH: 2.400 MM
HEIGTH: 2.000 MM
WEIGHT: 7.650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-2014 model

fully refurbished

4 axis

motorised crowning

cybelec modeva ra control 

new type aluminum double guide back gauge

perfect condition 2014 MODEL FULLY REFURBISHED 4 AXIS MOTORISED CROWNING CYBELEC MODEVA RA CONTROL NEW TYPE ALUMINUM DOUBLE GUIDE BACK GAUGE PERFECT CONDITION
Vendedor: SANDIKCILAR MACHINE ( DURMA DEALER )
Año de construcción: usado
Precio: 34.100 €
Ubicación: Land-: 6 mm<br/>: 4.100 mm<br/>: 1,5 °<br/>: 1.000 mm<br/>: 15 kw<br/>: 5.230 mm<br/>: 2.300 / 3.600 mm<br/>: 2.150 mm<br/>: 11.750 kg<br/>swing cut construction<br/>nc-preselection system d-touch 7 with touch screen for back gauge, cutting length, quantity, usb port<br/>motorized back gauge 1000 mm on ball screws, folding upwards<br/>clear control panel mounted on moveable arm <br/>hydraulic hold down pistons are arranged close to the cutting edge <br/>foot switch <br/>central, manual blade gap adjustment <br/>cutting line illumination <br/>broad table with balls<br/>piece counter<br/>single and continous stoke<br/>fold up finger guard 1.000 mm<br/>1 squaring arm 1. 500 mm with scale, t-slot and tilting cam <br/>2 supporting arms 1.000 mm with t-slot<br/>simple replacement and grinding of the blades <br/>variable adjustable cutting length for economic processing <br/>lower blade fourfold turnable <br/>upper blade double turnable <br/>oilfilling<br/>light barrier on the back of the machine<br/>qualified customer support <br/> user manual in german and english<br/>machine in conformity with ce-regulations<br/><br/>optional pneumatic sheet support, ? 5.850,--<br/><br/>(sample photo)<br/><br/>we have more than 850 references!<br/><br/>sheet thickness: 6 mm <br/>cutting length: 4.100 mm <br/>cutting angle: 1,5°<br/>back gauge: 1.000 mm <br/>motor power: 15 kw <br/>length: 5.230 mm <br/>width: 2.300 / 3.600 mm <br/>heigth: 2.150 mm <br/>weight: 11.750 kg<br/><br/><br/><br/> : 6 MM
: 4.100 MM
: 1,5 °
: 1.000 MM
: 15 KW
: 5.230 MM
: 2.300 / 3.600 MM
: 2.150 MM
: 11.750 KG
SWING CUT CONSTRUCTION
NC-PRESELECTION SYSTEM D-TOUCH 7 WITH TOUCH SCREEN FOR BACK GAUGE, CUTTING LENGTH, QUANTITY, USB PORT
MOTORIZED BACK GAUGE 1000 MM ON BALL SCREWS, FOLDING UPWARDS
CLEAR CONTROL PANEL MOUNTED ON MOVEABLE ARM 
HYDRAULIC HOLD DOWN PISTONS ARE ARRANGED CLOSE TO THE CUTTING EDGE 
FOOT SWITCH 
CENTRAL, MANUAL BLADE GAP ADJUSTMENT 
CUTTING LINE ILLUMINATION 
BROAD TABLE WITH BALLS
PIECE COUNTER
SINGLE AND CONTINOUS STOKE
FOLD UP FINGER GUARD 1.000 MM
1 SQUARING ARM 1. 500 MM WITH SCALE, T-SLOT AND TILTING CAM 
2 SUPPORTING ARMS 1.000 MM WITH T-SLOT
SIMPLE REPLACEMENT AND GRINDING OF THE BLADES 
VARIABLE ADJUSTABLE CUTTING LENGTH FOR ECONOMIC PROCESSING 
LOWER BLADE FOURFOLD TURNABLE 
UPPER BLADE DOUBLE TURNABLE
OILFILLING
LIGHT BARRIER ON THE BACK OF THE MACHINE
QUALIFIED CUSTOMER SUPPORT 
USER MANUAL IN GERMAN AND ENGLISH
MACHINE IN CONFORMITY WITH CE-REGULATIONS

OPTIONAL PNEUMATIC SHEET SUPPORT, ? 5.850,--

(SAMPLE PHOTO)

WE HAVE MORE THAN 850 REFERENCES!

SHEET THICKNESS: 6 MM
CUTTING LENGTH: 4.100 MM
CUTTING ANGLE: 1,5°
BACK GAUGE: 1.000 MM
MOTOR POWER: 15 KW
LENGTH: 5.230 MM
WIDTH: 2.300 / 3.600 MM
HEIGTH: 2.150 MM
WEIGHT: 11.750 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
	-working width 3500 mm
	-pressure capacity 200 t
	-clearance between the stands 3100 mm
	-table width 405 mm
	-throat depth 260 mm
	-height approx.					  240 mm
	-stroke 190 mm
	-working height approx.					  865 mm
	-motor power approx.					    15 kw
	-oil approx.					  300 l
	-space requirement approx.           b h 3850 x 2850 x 1900 mm
	-weight approx.				           13500 kg
	-with: - swivel arm - control panel with digital display
-mot. back gauge up to 620 mm
-you. crowning wila
-4-way universal matrix + pointed tool
-two hand control panel with footswitch, - support arms
 TECHNICAL DATA: -WORKING WIDTH 3500 MM -PRESSURE CAPACITY 200 T -CLEARANCE BETWEEN THE STANDS 3100 MM -TABLE WIDTH 405 MM -THROAT DEPTH 260 MM -HEIGHT APPROX. 240 MM -STROKE 190 MM -WORKING HEIGHT APPROX. 865 MM -MOTOR POWER APPROX. 15 KW -OIL APPROX. 300 L -SPACE REQUIREMENT APPROX. B H 3850 X 2850 X 1900 MM -WEIGHT APPROX. 13500 KG -WITH: - SWIVEL ARM - CONTROL PANEL WITH DIGITAL DISPLAY -MOT. BACK GAUGE UP TO 620 MM -YOU. CROWNING WILA -4-WAY UNIVERSAL MATRIX + POINTED TOOL -TWO HAND CONTROL PANEL WITH FOOTSWITCH, - SUPPORT ARMS
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 340.580 €
Ubicación: Land-: 3.100 x 1.550 mm<br/>: 1.070 - 1.080 nm<br/>: 5,0 khz<br/>: 33 kwh<br/>: 16 mm<br/>: 8 mm<br/>: 8 mm<br/>: 3.100 mm<br/>: 1.550 mm<br/>: 125 mm<br/>: 3.000 x 1.500 mm<br/>: 1.000 kg<br/>: 9.000 x 7.500 mm<br/>: 6.300 mm<br/>: 4.860 mm<br/>: 2.300 mm<br/>: 9.000 kg<br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 4000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>safety light barrier covering<br/>laser service set<br/><br/>options:<br/><br/>exhaust unit with filters   ? 12.460,-<br/><br/>scrap conveyor for small parts and waste   ? 5.750,-<br/><br/><br/>(video shows mod. hd-fl with linear motors, model generation 2014)<br/><br/><br/><br/>fiber laser hesse hd-fs made by durma<br/><br/>when the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model hd-fs. the control unit is integrated in the machine to keep the overall dimensions as low as possible. the table can be manually pulled out on the side of the machine to load and unload it.<br/><br/>the laser power source (resonator) of the hdfl series is an all-solid-state fiber laser without the need of any laser gas.<br/><br/>the fiber laser light is brought to the cutting head by a flexible glass fiber cable requiring no mirrors.<br/><br/>this technology reduces the amount of maintenance to a minimum and offers the lowest possible running cost with a wall-plug efficiency of 30 %.<br/><br/>this fiber laser will cut faster at lower operational cost than any co2 laser at the same power.<br/><br/>it makes the machine very economical, fast and easy to handle.<br/> <br/>the machine consists of the following components:<br/><br/>capsuled cutting room with safety glass<br/>lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time<br/>cnc control siemens sinumerik with grafic display (made in germany!)<br/>- technology and cutting parameter data bank with presettings for common metals<br/>laser source i.p.g 2000 (made in germany!)<br/>autofocus-cutting head precitec with integrated and adjusted sensor technics and mororized focus position adjustment (made in germany!) <br/>liquid cooler for cutting head and resonator<br/>cad/cam software lantek to program and optimize utilization of material (nesting)<br/>remote maintenance by lan connection<br/>laser service set<br/><br/><br/><br/>cutting area: 3.100 x 1.550 mm <br/>laser power: 0,4 - 4,0 kw <br/>wavelength: 1.070 - 1.080 nm <br/>polarization: random <br/>max. pulse frequency: 5,0 khz <br/>average power consumption: 33 kwh <br/>application range:  <br/>mild steel: 16 mm <br/>stainless steel: 8 mm <br/>aluminium: 8 mm <br/>working ange:  <br/>x-axis: 3.100 mm <br/>y-axis: 1.550 mm <br/>z-axis: 125 mm<br/>max. sheet size: 3.000 x 1.500 mm<br/>max. sheet weight: 1.000 kg<br/>dynamic and precision:  <br/>max speed x-axes: 90 m/min<br/>max speed y-axes: 90 m/min<br/>max. spped simultaneous: 127 m/min<br/>max. acceleration: 10 m/s² <br/>positional accuracy: +/- 0,05 mm <br/>repeatability: +/- 0,05 mm <br/>dimensions:  <br/>lay-out area ca.: 9.000 x 7.500 mm<br/>length: 6.300 mm<br/>width: 4.860 mm<br/>height: 2.300 mm<br/>weight ca.: 9.000 kg<br/><br/><br/><br/> : 3.100 X 1.550 MM
: 1.070 - 1.080 NM
: 5,0 KHZ
: 33 KWH
: 16 MM
: 8 MM
: 8 MM
: 3.100 MM
: 1.550 MM
: 125 MM
: 3.000 X 1.500 MM
: 1.000 KG
: 9.000 X 7.500 MM
: 6.300 MM
: 4.860 MM
: 2.300 MM
: 9.000 KG
FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 4000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
SAFETY LIGHT BARRIER COVERING
LASER SERVICE SET

OPTIONS:

EXHAUST UNIT WITH FILTERS   ? 12.460,-

SCRAP CONVEYOR FOR SMALL PARTS AND WASTE   ? 5.750,-


(VIDEO SHOWS MOD. HD-FL WITH LINEAR MOTORS, MODEL GENERATION 2014)



FIBER LASER HESSE HD-FS MADE BY DURMA

WHEN THE REQUIREMENT IS TO LASER CUT WITH HIGH PERFORMANCE AND PRECISION, THOUGH THE AVAILABLE SPACE IS LIMITED, IT IS A TASK FOR THE MODEL HD-FS. THE CONTROL UNIT IS INTEGRATED IN THE MACHINE TO KEEP THE OVERALL DIMENSIONS AS LOW AS POSSIBLE. THE TABLE CAN BE MANUALLY PULLED OUT ON THE SIDE OF THE MACHINE TO LOAD AND UNLOAD IT.

THE LASER POWER SOURCE (RESONATOR) OF THE HDFL SERIES IS AN ALL-SOLID-STATE FIBER LASER WITHOUT THE NEED OF ANY LASER GAS.

THE FIBER LASER LIGHT IS BROUGHT TO THE CUTTING HEAD BY A FLEXIBLE GLASS FIBER CABLE REQUIRING NO MIRRORS.

THIS TECHNOLOGY REDUCES THE AMOUNT OF MAINTENANCE TO A MINIMUM AND OFFERS THE LOWEST POSSIBLE RUNNING COST WITH A WALL-PLUG EFFICIENCY OF 30 %.

THIS FIBER LASER WILL CUT FASTER AT LOWER OPERATIONAL COST THAN ANY CO2 LASER AT THE SAME POWER.

IT MAKES THE MACHINE VERY ECONOMICAL, FAST AND EASY TO HANDLE.

THE MACHINE CONSISTS OF THE FOLLOWING COMPONENTS:

CAPSULED CUTTING ROOM WITH SAFETY GLASS
LATERAL SHUTTLE TABLE FOR SIMULTANEOUS LOADING/UNLOADING AND CUTTING TO REDUCE THE SECONDARY PROCESSING TIME
CNC CONTROL SIEMENS SINUMERIK WITH GRAFIC DISPLAY (MADE IN GERMANY!)
- TECHNOLOGY AND CUTTING PARAMETER DATA BANK WITH PRESETTINGS FOR COMMON METALS
LASER SOURCE I.P.G 2000 (MADE IN GERMANY!)
AUTOFOCUS-CUTTING HEAD PRECITEC WITH INTEGRATED AND ADJUSTED SENSOR TECHNICS AND MORORIZED FOCUS POSITION ADJUSTMENT (MADE IN GERMANY!)
LIQUID COOLER FOR CUTTING HEAD AND RESONATOR
CAD/CAM SOFTWARE LANTEK TO PROGRAM AND OPTIMIZE UTILIZATION OF MATERIAL (NESTING)
REMOTE MAINTENANCE BY LAN CONNECTION
LASER SERVICE SET



CUTTING AREA: 3.100 X 1.550 MM
LASER POWER: 0,4 - 4,0 KW
WAVELENGTH: 1.070 - 1.080 NM
POLARIZATION: RANDOM
MAX. PULSE FREQUENCY: 5,0 KHZ
AVERAGE POWER CONSUMPTION: 33 KWH
APPLICATION RANGE:
MILD STEEL: 16 MM
STAINLESS STEEL: 8 MM
ALUMINIUM: 8 MM
WORKING ANGE:
X-AXIS: 3.100 MM
Y-AXIS: 1.550 MM
Z-AXIS: 125 MM
MAX. SHEET SIZE: 3.000 X 1.500 MM
MAX. SHEET WEIGHT: 1.000 KG
DYNAMIC AND PRECISION:
MAX SPEED X-AXES: 90 M/MIN
MAX SPEED Y-AXES: 90 M/MIN
MAX. SPPED SIMULTANEOUS: 127 M/MIN
MAX. ACCELERATION: 10 M/S²
POSITIONAL ACCURACY: +/- 0,05 MM
REPEATABILITY: +/- 0,05 MM
DIMENSIONS:
LAY-OUT AREA CA.: 9.000 X 7.500 MM
LENGTH: 6.300 MM
WIDTH: 4.860 MM
HEIGHT: 2.300 MM
WEIGHT CA.: 9.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:

-working width 1030 mm
-material thickness 1.25 mm
-roll diameter 55 mm
-upper roller swing
-rear and front wave about eccentric adjustable
-rear and front wave each with a groove to round
-for sheet metal with wire inlay
	-space requirement approx.	      b h 1350 x 1050 x d 750 mm
-weight approx.					  150 kg		
 TECHNICAL DATA: -WORKING WIDTH 1030 MM -MATERIAL THICKNESS 1.25 MM -ROLL DIAMETER 55 MM -UPPER ROLLER SWING -REAR AND FRONT WAVE ABOUT ECCENTRIC ADJUSTABLE -REAR AND FRONT WAVE EACH WITH A GROOVE TO ROUND -FOR SHEET METAL WITH WIRE INLAY -SPACE REQUIREMENT APPROX. B H 1350 X 1050 X D 750 MM -WEIGHT APPROX. 150 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 69.200 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bendingbending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis:	y1 / y2, x und r axes<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 	2.600 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDINGBENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: Y1 / Y2, X UND R AXES
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
	-working width 3050 mm
	-pressure capacity 200 t
	-clearance between the stands 2550 mm
	-table width 405 mm
	-throat depth 350 mm
	-height approx.					  240 mm
	-stroke 175 mm
	-working height approx.					  865 mm
	-motor power approx.					    15 kw
	-oil approx.					  300 l
	-space requirement approx.           b 4450 x h 2800 x 1900 mm
	-weight approx.				           11800 kg
	-with: - swivel arm - control panel with positioning control elgo
-mot. backgauge - security - light barrier fissler
-4-way universal matrix + split pointed tool - two hand control panel with footswitch, - support arms
 TECHNICAL DATA: -WORKING WIDTH 3050 MM -PRESSURE CAPACITY 200 T -CLEARANCE BETWEEN THE STANDS 2550 MM -TABLE WIDTH 405 MM -THROAT DEPTH 350 MM -HEIGHT APPROX. 240 MM -STROKE 175 MM -WORKING HEIGHT APPROX. 865 MM -MOTOR POWER APPROX. 15 KW -OIL APPROX. 300 L -SPACE REQUIREMENT APPROX. B 4450 X H 2800 X 1900 MM -WEIGHT APPROX. 11800 KG -WITH: - SWIVEL ARM - CONTROL PANEL WITH POSITIONING CONTROL ELGO -MOT. BACKGAUGE - SECURITY - LIGHT BARRIER FISSLER -4-WAY UNIVERSAL MATRIX + SPLIT POINTED TOOL - TWO HAND CONTROL PANEL WITH FOOTSWITCH, - SUPPORT ARMS
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 60.210 €
Ubicación: Land-: 4.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 5.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 12.850 ~  kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 6.680,--   quick connecting terminals for the upper tool ? 500,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 175 to <br/>axes: y1 / y2 and x axes<br/>upper tool: 75° divided <br/>lower tool: 4 v- die 16,22,35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 18,5 kw <br/>length: 5.250 mm <br/>width: 1.700 mm <br/>height: 2.750 mm<br/>weight: ~ 12.850 kg<br/><br/><br/><br/> : 4.050 MM
: 175 TO
: 18,5 KW
: 5.250 MM
: 1.700 MM
: 2.750 MM
: 12.850 ~ KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 6.680,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 500,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 175 TO
AXES: Y1 / Y2 AND X AXES
UPPER TOOL: 75° DIVIDED
LOWER TOOL: 4 V- DIE 16,22,35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 18,5 KW
LENGTH: 5.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: ~ 12.850 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 520 mm
-maximum thickness 3 mm
-bending angle approx.			0-135 â°
-lockable with end stop
-max stroke of clamping beam 260 mm
-maximum adjustment beam 120 mm
-maximum adjustment of the lower beam 60 mm
-manual bending is supported by eccentric weight
-you. backgauge
	-space requirement approx.	         b h 1550 x 1400 x h 600 mm
-weight approx.					  400 kg		
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 520 MM -MAXIMUM THICKNESS 3 MM -BENDING ANGLE APPROX. 0-135 &ACIRC;&DEG; -LOCKABLE WITH END STOP -MAX STROKE OF CLAMPING BEAM 260 MM -MAXIMUM ADJUSTMENT BEAM 120 MM -MAXIMUM ADJUSTMENT OF THE LOWER BEAM 60 MM -MANUAL BENDING IS SUPPORTED BY ECCENTRIC WEIGHT -YOU. BACKGAUGE -SPACE REQUIREMENT APPROX. B H 1550 X 1400 X H 600 MM -WEIGHT APPROX. 400 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 236.900 €
Ubicación: Land-: 200x150x10 mm<br/>: 200x200x10 mm<br/>: 300-280 mm<br/>: 740 mm<br/>: 55 + 15 kw<br/>: 3.850 mm<br/>: 3.050 mm<br/>: 2.800 mm<br/>: 24.000 kg<br/>3 driven rolls (hydromotor and planetary gear) <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions<br/>plane rolls <br/>lateral rolls (forward-backward hydraulic, rest manual)<br/>horizontal and vertical operation <br/>double foot pedal for- and backward drive <br/> machine and equipment according to the ce regulations<br/><br/>we have more than 240 references!<br/><br/>(sample photo shows mod. pbh 125)<br/><br/><br/>performances:	<br/>flat steel vertical position: 250x60 mm / 2.000 mm<br/>flat steel horizontal position: 450x70 mm / 1.000 mm<br/>square bar: 150x150 mm / 2.200 mm<br/>round bar: Ø 170 mm / 1.800 mm<br/>tube: Ø 300x10 mm / 4.000 mm<br/>form tube vertical position: 200x150x10 mm<br/>form tube square: 200x200x10 mm<br/>angle leg outside: 200x20 mm / 2.300 mm<br/>angle leg inside: 200x28 mm / 2.300 mm<br/>shaft diameter: 300-280 mm<br/>roll diameter: 740 mm<br/>driven rolls: 3<br/>motor power: 55 + 15 kw<br/>length: 3.850 mm<br/>width: 3.050 mm<br/>heigth: 2.800 mm<br/>weight: 24.000 kg<br/><br/><br/><br/> : 200X150X10 MM
: 200X200X10 MM
: 300-280 MM
: 740 MM
: 55 + 15 KW
: 3.850 MM
: 3.050 MM
: 2.800 MM
: 24.000 KG
3 DRIVEN ROLLS (HYDROMOTOR AND PLANETARY GEAR)
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS
PLANE ROLLS 
LATERAL ROLLS (FORWARD-BACKWARD HYDRAULIC, REST MANUAL)
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 240 REFERENCES!

(SAMPLE PHOTO SHOWS MOD. PBH 125)


PERFORMANCES:
FLAT STEEL VERTICAL POSITION: 250X60 MM / 2.000 MM
FLAT STEEL HORIZONTAL POSITION: 450X70 MM / 1.000 MM
SQUARE BAR: 150X150 MM / 2.200 MM
ROUND BAR: Ø 170 MM / 1.800 MM
TUBE: Ø 300X10 MM / 4.000 MM
FORM TUBE VERTICAL POSITION: 200X150X10 MM
FORM TUBE SQUARE: 200X200X10 MM
ANGLE LEG OUTSIDE: 200X20 MM / 2.300 MM
ANGLE LEG INSIDE: 200X28 MM / 2.300 MM
SHAFT DIAMETER: 300-280 MM
ROLL DIAMETER: 740 MM
DRIVEN ROLLS: 3
MOTOR POWER: 55 + 15 KW
LENGTH: 3.850 MM
WIDTH: 3.050 MM
HEIGTH: 2.800 MM
WEIGHT: 24.000 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-punÇonadora sleep 1250x30 ton rp6 rotation
punÇonadora cnc 1250 x rp6 model sleep 30 ton rotation punch pres PUNÇONADORA SLEEP 1250X30 TON RP6 ROTATION PUNÇONADORA CNC 1250 X RP6 MODEL SLEEP 30 TON ROTATION PUNCH PRES
Vendedor: occasionmachines
Año de construcción: usado
Precio: 177.500 €
Ubicación: Land-: 20 to<br/>: 1.500 mm<br/>: 1.100 1/ min<br/>: 325 1/ min<br/>: 40 mm<br/>: 25 mm<br/>: 6 mm<br/>: 3 mm<br/>: 3 mm<br/>: 1,5 mm<br/>: 12,8 - 31,7 mm<br/>: 31,8 - 50,8 mm<br/>: 50,9 - 88,9 mm<br/>: 50,9 - 88,9 mm<br/>: 200 kg<br/>: 940 mm<br/>: 6 bar<br/>: 88,9 mm<br/>: 7,5 kw<br/>: 2.310 mm<br/>: 6.300 mm<br/>: 8.300 mm<br/>: 6.650 mm<br/>: 7.650 mm<br/>: 19.500 kg<br/>control unit, siemens sinumerik 840 d sl<br/>cad-cam software<br/>programming on the control panel<br/>remote diagnostic function<br/>automatic clamp positioning<br/>network ethernet communication<br/>automatic tool lubrication<br/>ups for control panel<br/>movable scrap box<br/>brush table<br/>oil cooler<br/>usb driver<br/>command pedal<br/>web cam for service<br/>reposition on x axis<br/>alignment tools for index station d<br/>manual nesting<br/>infra-red light barriers <br/>machine and equipment according to the ce regulations<br/><br/>(sample photo)<br/><br/>punching force: 20 to <br/>working area: 3.000+r x 1.500 mm <br/>x-axis movement: 3.000+r mm+r mm (repositioning) <br/>y-axis movement: 1.500 mm  <br/>speed of y-axis: 60 m/min <br/>speed of x-axis: 70m/min <br/>speed combined x+y: 92 m/min  <br/>max. strokes (in 1 mm steps, 1 mm thickness): 1.100 1/min <br/>max. strokes (in 25 mm steps, 1 mm thickness): 325 1/min <br/>max. marking speed: 1.200 1/min. <br/>main cylinder stroke: 40 mm <br/>max. punching stroke: 25 mm <br/>max. cutting thickness with fix tool station steel: 6 mm <br/>max. cutting thickness with fix tool station stainless steel: 3 mm  <br/>max. cutting thickness with index tool station steel: 3 mm <br/>max. cutting thickness with index tool station stainless steel: 1,5 mm<br/>turret (27 stations without tool and holder): <br/>11 x a-station fix: 0,8-12,7 mm <br/>11 x b-station fix: 12,8 - 31,7 mm <br/>2 x c-station fix: 31,8 - 50,8 mm  <br/>1 x d-station fix: 50,9 - 88,9 mm<br/>3 x d-station index: 50,9 - 88,9 mm<br/>positioning accuracy: +/- 0,1 mm <br/>repeatable accuracy: +/- 0,05 mm <br/>turret rotation speed: 22 u/min  <br/>autoindex-rotation speed: 150 u/min <br/>max. weight of sheet: 200 kg <br/>table height: 940 mm <br/>air pressure: 6 bar <br/>max. punching diameter (d-station): 88,9 mm <br/>motor power: 7,5 kw <br/>main dimensions: <br/>height: 2.310 mm <br/>width without light barrier: 6.300 mm <br/>width with light barrier: 8.300 mm <br/>length without light barrier: 6.650 mm <br/>length with light barrier: 7.650 mm<br/>weight: 19.500 kg<br/><br/><br/><br/> : 20 TO
: 1.500 MM
: 1.100 1/ MIN
: 325 1/ MIN
: 40 MM
: 25 MM
: 6 MM
: 3 MM
: 3 MM
: 1,5 MM
: 12,8 - 31,7 MM
: 31,8 - 50,8 MM
: 50,9 - 88,9 MM
: 50,9 - 88,9 MM
: 200 KG
: 940 MM
: 6 BAR
: 88,9 MM
: 7,5 KW
: 2.310 MM
: 6.300 MM
: 8.300 MM
: 6.650 MM
: 7.650 MM
: 19.500 KG
CONTROL UNIT, SIEMENS SINUMERIK 840 D SL
CAD-CAM SOFTWARE
PROGRAMMING ON THE CONTROL PANEL
REMOTE DIAGNOSTIC FUNCTION
AUTOMATIC CLAMP POSITIONING
NETWORK ETHERNET COMMUNICATION
AUTOMATIC TOOL LUBRICATION
UPS FOR CONTROL PANEL
MOVABLE SCRAP BOX
BRUSH TABLE
OIL COOLER
USB DRIVER
COMMAND PEDAL
WEB CAM FOR SERVICE
REPOSITION ON X AXIS
ALIGNMENT TOOLS FOR INDEX STATION D
MANUAL NESTING
INFRA-RED LIGHT BARRIERS 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

(SAMPLE PHOTO)

PUNCHING FORCE: 20 TO
WORKING AREA: 3.000+R X 1.500 MM
X-AXIS MOVEMENT: 3.000+R MM+R MM (REPOSITIONING)
Y-AXIS MOVEMENT: 1.500 MM
SPEED OF Y-AXIS: 60 M/MIN
SPEED OF X-AXIS: 70M/MIN
SPEED COMBINED X+Y: 92 M/MIN
MAX. STROKES (IN 1 MM STEPS, 1 MM THICKNESS): 1.100 1/MIN
MAX. STROKES (IN 25 MM STEPS, 1 MM THICKNESS): 325 1/MIN
MAX. MARKING SPEED: 1.200 1/MIN.
MAIN CYLINDER STROKE: 40 MM
MAX. PUNCHING STROKE: 25 MM
MAX. CUTTING THICKNESS WITH FIX TOOL STATION STEEL: 6 MM
MAX. CUTTING THICKNESS WITH FIX TOOL STATION STAINLESS STEEL: 3 MM
MAX. CUTTING THICKNESS WITH INDEX TOOL STATION STEEL: 3 MM
MAX. CUTTING THICKNESS WITH INDEX TOOL STATION STAINLESS STEEL: 1,5 MM
TURRET (27 STATIONS WITHOUT TOOL AND HOLDER):
11 X A-STATION FIX: 0,8-12,7 MM
11 X B-STATION FIX: 12,8 - 31,7 MM
2 X C-STATION FIX: 31,8 - 50,8 MM
1 X D-STATION FIX: 50,9 - 88,9 MM
3 X D-STATION INDEX: 50,9 - 88,9 MM
POSITIONING ACCURACY: +/- 0,1 MM
REPEATABLE ACCURACY: +/- 0,05 MM
TURRET ROTATION SPEED: 22 U/MIN
AUTOINDEX-ROTATION SPEED: 150 U/MIN
MAX. WEIGHT OF SHEET: 200 KG
TABLE HEIGHT: 940 MM
AIR PRESSURE: 6 BAR
MAX. PUNCHING DIAMETER (D-STATION): 88,9 MM
MOTOR POWER: 7,5 KW
MAIN DIMENSIONS:
HEIGHT: 2.310 MM
WIDTH WITHOUT LIGHT BARRIER: 6.300 MM
WIDTH WITH LIGHT BARRIER: 8.300 MM
LENGTH WITHOUT LIGHT BARRIER: 6.650 MM
LENGTH WITH LIGHT BARRIER: 7.650 MM
WEIGHT: 19.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 9.998 €
Ubicación: Land-press brake durma hap 2035 manufactured in 2005.

characteristic parameters:
- emphasis: 35 tons
- bending length: 2050 mm
- overhang: 350 mm
- distance between columns: 1650 mm
- stroke: 125 mm
- access speed: 120 mm/s
- working speed: 9 mm/s
- return speed: 86 mm/s
- oil tank capacity: 60 l
- engine power: 4 kw
- dimensions of the machine (height x length x width): 2060 x 1595 x 2950 mm
- weight: 2600 kg
  PRESS BRAKE DURMA HAP 2035 MANUFACTURED IN 2005. CHARACTERISTIC PARAMETERS: - EMPHASIS: 35 TONS - BENDING LENGTH: 2050 MM - OVERHANG: 350 MM - DISTANCE BETWEEN COLUMNS: 1650 MM - STROKE: 125 MM - ACCESS SPEED: 120 MM/S - WORKING SPEED: 9 MM/S - RETURN SPEED: 86 MM/S - OIL TANK CAPACITY: 60 L - ENGINE POWER: 4 KW - DIMENSIONS OF THE MACHINE (HEIGHT X LENGTH X WIDTH): 2060 X 1595 X 2950 MM - WEIGHT: 2600 KG
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-: 1,5 mm<br/>: 1.250 mm<br/>: 1.330 mm<br/>: 2.250 mm<br/>: 1.000 mm<br/>: 1.150 mm<br/>: 460 kg<br/>welded steel construction<br/>with manual hold down unit<br/>back gauge adjustable by handwheel<br/>users manual in english<br/><br/>sheet thickness: 1,5 mm<br/>cutting length: 1.250 mm<br/>back gauge: 0 - 500 mm<br/>blade length: 1.330 mm<br/>length: 2.250 mm<br/>width: 1.000 mm<br/>heigth: 1.150 mm<br/>weight: 460 kg<br/><br/><br/><br/> : 1,5 MM
: 1.250 MM
: 1.330 MM
: 2.250 MM
: 1.000 MM
: 1.150 MM
: 460 KG
WELDED STEEL CONSTRUCTION
WITH MANUAL HOLD DOWN UNIT
BACK GAUGE ADJUSTABLE BY HANDWHEEL
USERS MANUAL IN ENGLISH

SHEET THICKNESS: 1,5 MM
CUTTING LENGTH: 1.250 MM
BACK GAUGE: 0 - 500 MM
BLADE LENGTH: 1.330 MM
LENGTH: 2.250 MM
WIDTH: 1.000 MM
HEIGTH: 1.150 MM
WEIGHT: 460 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: durma
model: dhgm 3006
application type: shearing
machine type: shearing machine
availability: immediately
construction year: 2003
location: turkey
origin country: turkey

workpiece:
workpiece x: 3000 mm

max material thickness:
steel: 6 mm
 OVERVIEW: BRAND: DURMA MODEL: DHGM 3006 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2003 LOCATION: TURKEY ORIGIN COUNTRY: TURKEY WORKPIECE: WORKPIECE X: 3000 MM MAX MATERIAL THICKNESS: STEEL: 6 MM
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 47.810 €
Ubicación: Land-: 3.050 mm<br/>: 135 to<br/>: 530 mm<br/>: 265 mm<br/>: 410 mm<br/>: 15 kw<br/>: 4.200 mm<br/>: 1.680 mm<br/>: 2.750 mm<br/>: 10.500 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t ? 5.750,--   cnc controlled r-axis ? 5.960,--   quick connecting terminals for the upper tool ? 380,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm <br/>bending force: 135 to <br/>daylight opening: 530 mm <br/>stroke: 265 mm <br/>gap in sideframe: 410 mm <br/>axis: y1 / y2 and x axes <br/>upper tool: 75° gooseneck, sectioned <br/>lower tool: 4-v die 16, 22, 35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc <br/>back gauge: cnc controlled <br/>motor power: 15 kw <br/>length: 4.200 mm <br/>width: 1.680 mm <br/>height: 2.750 mm<br/>weight: 10.500 kg<br/><br/><br/><br/> : 3.050 MM
: 135 TO
: 530 MM
: 265 MM
: 410 MM
: 15 KW
: 4.200 MM
: 1.680 MM
: 2.750 MM
: 10.500 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T ? 5.750,-- CNC CONTROLLED R-AXIS ? 5.960,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL ? 380,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 135 TO
DAYLIGHT OPENING: 530 MM
STROKE: 265 MM
GAP IN SIDEFRAME: 410 MM
AXIS: Y1 / Y2 AND X AXES
UPPER TOOL: 75° GOOSENECK, SECTIONED
LOWER TOOL: 4-V DIE 16, 22, 35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 15 KW
LENGTH: 4.200 MM
WIDTH: 1.680 MM
HEIGHT: 2.750 MM
WEIGHT: 10.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cutting length: 4100 mm; <br>cutting thickness: 12 mm; <br> CUTTING LENGTH: 4100 MM;
CUTTING THICKNESS: 12 MM;
Vendedor: Theo Stefan OG
Año de construcción: usado
Precio: 58.200 €
Ubicación: Land-: 2.550 mm<br/>: 100 to<br/>: 11 kw<br/>: 2.200 mm<br/>: 410 mm<br/>: 104 mm<br/>: 900 mm<br/>: 530 mm<br/>: 650 mm<br/>: 3.800 mm<br/>: 1.670 mm<br/>: 2.750 mm<br/>: 8.900 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 2.550 mm<br/>bending force: 100 to<br/>axis: y1 / y2, x und r axes<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>motor power: 11 kw<br/>distance between columns: 	2.200 mm<br/>daylight: 410 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 530 mm<br/>travel of back gauge (x): 650 mm<br/>length: 3.800 mm<br/>width: 1.670 mm<br/>height: 2.750 mm<br/>weight: 8.900 kg<br/><br/><br/><br/> : 2.550 MM
: 100 TO
: 11 KW
: 2.200 MM
: 410 MM
: 104 MM
: 900 MM
: 530 MM
: 650 MM
: 3.800 MM
: 1.670 MM
: 2.750 MM
: 8.900 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN

OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 2.550 MM
BENDING FORCE: 100 TO
AXIS: Y1 / Y2, X UND R AXES
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 11 KW
DISTANCE BETWEEN COLUMNS: 2.200 MM
DAYLIGHT: 410 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 530 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 3.800 MM
WIDTH: 1.670 MM
HEIGHT: 2.750 MM
WEIGHT: 8.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: durma
model: cnc t hap 40400
application type: bending
machine type: bending machine
availability: immediately
construction year: 2001
production hours: 20000
location: spain
country of origin: turkey

general data:
measurements width: 2x 5500 mm
measurements depth: 3300 mm
measurements height: 3550 mm
machine weight: 2x 28000 kg

main drive:
pressing force: 4000 kn
bending length: 4000 mm
main motor power: 30 kw

control unit:
brand: cibylec
model: dnc 800

media:
main electronic connection: 400 v / 50 hz 
oil tank: 400 l

additional equipment:
1 - tools OVERVIEW: BRAND: DURMA MODEL: CNC T HAP 40400 APPLICATION TYPE: BENDING MACHINE TYPE: BENDING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2001 PRODUCTION HOURS: 20000 LOCATION: SPAIN COUNTRY OF ORIGIN: TURKEY GENERAL DATA: MEASUREMENTS WIDTH: 2X 5500 MM MEASUREMENTS DEPTH: 3300 MM MEASUREMENTS HEIGHT: 3550 MM MACHINE WEIGHT: 2X 28000 KG MAIN DRIVE: PRESSING FORCE: 4000 KN BENDING LENGTH: 4000 MM MAIN MOTOR POWER: 30 KW CONTROL UNIT: BRAND: CIBYLEC MODEL: DNC 800 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V / 50 HZ OIL TANK: 400 L ADDITIONAL EQUIPMENT: 1 - TOOLS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 66.600 €
Ubicación: Land-: 3.050 mm<br/>: 135 to<br/>: 15 kw<br/>: 2.600 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.200 mm<br/>: 1.680 mm<br/>: 2.750 mm<br/>: 10.500 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bendingbending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 135 to<br/>axis: y1 / y2, x und r axes<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>motor power: 15 kw<br/>distance between columns: 	2.600 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.200 mm<br/>width: 1.680 mm<br/>height: 2.750 mm<br/>weight: 10.500 kg<br/><br/><br/><br/> : 3.050 MM
: 135 TO
: 15 KW
: 2.600 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.200 MM
: 1.680 MM
: 2.750 MM
: 10.500 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDINGBENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 3.050 MM
BENDING FORCE: 135 TO
AXIS: Y1 / Y2, X UND R AXES
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 15 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.200 MM
WIDTH: 1.680 MM
HEIGHT: 2.750 MM
WEIGHT: 10.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 37.000 €
Ubicación: Land-2016 model

3mt 135 tons

4 axis y1 y2 x r

motorised crowning

delem 66 t control

standart tool

the machine is almost not used  and in very good condition  2016 MODEL 3MT 135 TONS 4 AXIS Y1 Y2 X R MOTORISED CROWNING DELEM 66 T CONTROL STANDART TOOL THE MACHINE IS ALMOST NOT USED AND IN VERY GOOD CONDITION
Vendedor: SANDIKCILAR MACHINE ( DURMA DEALER )
Año de construcción: usado
Precio: 155.300 €
Ubicación: Land-: 6.050 mm<br/>: 400 to<br/>: 37 kw<br/>: 5.100 mm<br/>: 630 mm<br/>: 154 mm<br/>: 1.220 mm<br/>: 510 mm<br/>: 750 mm<br/>: 7.500 mm<br/>: 2.110 mm<br/>: 3.710 mm<br/>: 36.000 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 6.050 mm<br/>bending force: 400 to<br/>axis:	y1 / y2 / x and r axes<br/>upper tool:	75° goose neck, sectioned<br/>lower tool:	4-v die 16,22,35 und 50 mm<br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc conrolled<br/>motor power: 37 kw<br/>distance between columns: 	5.100 mm<br/>daylight: 630 mm<br/>table width: 154 mm<br/>table height: 1.220 mm<br/>throat depth: 510 mm<br/>travel of back gauge (x): 750 mm<br/>length: 7.500 mm<br/>width: 2.110 mm<br/>height: 3.710 mm<br/>weight: 36.000 kg<br/><br/><br/><br/> : 6.050 MM
: 400 TO
: 37 KW
: 5.100 MM
: 630 MM
: 154 MM
: 1.220 MM
: 510 MM
: 750 MM
: 7.500 MM
: 2.110 MM
: 3.710 MM
: 36.000 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT



STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 6.050 MM
BENDING FORCE: 400 TO
AXIS: Y1 / Y2 / X AND R AXES
UPPER TOOL: 75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 16,22,35 UND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 37 KW
DISTANCE BETWEEN COLUMNS: 5.100 MM
DAYLIGHT: 630 MM
TABLE WIDTH: 154 MM
TABLE HEIGHT: 1.220 MM
THROAT DEPTH: 510 MM
TRAVEL OF BACK GAUGE (X): 750 MM
LENGTH: 7.500 MM
WIDTH: 2.110 MM
HEIGHT: 3.710 MM
WEIGHT: 36.000 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DURMA types: