90 ofertas

Año de construcción: usado
Ubicación: Land-co2 recovery plant union engineering rbu 500 kg/h
 
the recovery plant is specially designed to recover co2 from fermentation processes at breweries. this complete co2 plant was delivered by union engineering in 2005 and it has nominal co2 removal capacity of 500 kg/h. co2 compressor is two stage mehrer piston compressor and refrigeration compressor is sobroe operating with ammonia (r717). the plant has siemens s7-300 plc control system where operation is carried our via a 12” screen panel with windows ce operating system. the delivery includes following main components: 
 
•	foam trap, material aisi 304
•	water scrubber for co 2 gas flushing mainly from alcohol, capacity 1200 kg/h co2, material aisi 304 (common with another 500 kg co2 recovery system)
•	inflammable co2 gas storage, 50 m3 open type, material reinforced pvc (common with another 500 kg co2 recovery system) 
•	co2 compressor, type josef mehrer tzw 70, capacity 550 kg/h co2, with 55 kw/620 rpm electric motors. radiator cooler for cooling waters. 
•	activated carbon filter for removing odors, consisting of 2 identical 260 liter / 20 bar vessels filled with active carbon, material aisi 304, equipped with a blower and air heating element.
•	dehydrator for drying of gas to a dew point, consisting of 2 identical 139 liter / 20 bar vessels filled with a desiccant.
•	cooling compressor piston type sabroe operating with r717 refrigerant with evaporative refrigerant condenser
•	co2 liquefier consisting of shell-and-tube type co2 condenser and nh3 evaporator. separation of non-condensable inert gases in made with a purge system
•	steam heated evaporator for liquid co2, capacity 2200 kg/h co2 (common with another 500 kg co2 recovery system) 
•	gas analyzers 
operation description of this co2 recover plant 
gaseous carbon dioxide (co2) is fed from the fermentation tank through the foam separator where fermentation foam is removed and gas is pumped to the intermediate 50 m3 co2 buffer storage balloon. from this intermediate storage gas is fed into the scrubber where the co2 is cleaned. scrubber is designed to clean the co2 from ethanol and other impurities with a counter current clean water flow.
  
purified gas is fed into intercooled piston type co2 compressor where it is compressed in two stages into 18.5 bar. compressed gas (co2) passes through double acting, electric heated active coal cleaning filters and after that through double acting desiccant dyers. these filters are clearing and draining of co2, which is then fed to the liquefaction plant. liquefaction plant consist a condenser, evaporator and chiller running on r717 refrigerant. refrigerant is compressed with a piston cooling compressor and it evaporates in the condenser and cools co2 at - 30 0 c, allowing the condensation of co2 at a pressure of 17.4 bar. non-condensable gases will be extracted from liquid co2 in this stage. clean, liquefied carbon dioxide is pumped into the storage tank (not a part of this plant) and where it is fed into the evaporator for usage in the plant. in the evaporator, the liquid co2 is heated steam and it is vaporized and converted into the gaseous co2. at a pressure of 17.5 bar and pressure is further reduced to suitable for plant system.


 CO2 RECOVERY PLANT UNION ENGINEERING RBU 500 KG/H THE RECOVERY PLANT IS SPECIALLY DESIGNED TO RECOVER CO2 FROM FERMENTATION PROCESSES AT BREWERIES. THIS COMPLETE CO2 PLANT WAS DELIVERED BY UNION ENGINEERING IN 2005 AND IT HAS NOMINAL CO2 REMOVAL CAPACITY OF 500 KG/H. CO2 COMPRESSOR IS TWO STAGE MEHRER PISTON COMPRESSOR AND REFRIGERATION COMPRESSOR IS SOBROE OPERATING WITH AMMONIA (R717). THE PLANT HAS SIEMENS S7-300 PLC CONTROL SYSTEM WHERE OPERATION IS CARRIED OUR VIA A 12” SCREEN PANEL WITH WINDOWS CE OPERATING SYSTEM. THE DELIVERY INCLUDES FOLLOWING MAIN COMPONENTS: • FOAM TRAP, MATERIAL AISI 304 • WATER SCRUBBER FOR CO 2 GAS FLUSHING MAINLY FROM ALCOHOL, CAPACITY 1200 KG/H CO2, MATERIAL AISI 304 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • INFLAMMABLE CO2 GAS STORAGE, 50 M3 OPEN TYPE, MATERIAL REINFORCED PVC (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • CO2 COMPRESSOR, TYPE JOSEF MEHRER TZW 70, CAPACITY 550 KG/H CO2, WITH 55 KW/620 RPM ELECTRIC MOTORS. RADIATOR COOLER FOR COOLING WATERS. • ACTIVATED CARBON FILTER FOR REMOVING ODORS, CONSISTING OF 2 IDENTICAL 260 LITER / 20 BAR VESSELS FILLED WITH ACTIVE CARBON, MATERIAL AISI 304, EQUIPPED WITH A BLOWER AND AIR HEATING ELEMENT. • DEHYDRATOR FOR DRYING OF GAS TO A DEW POINT, CONSISTING OF 2 IDENTICAL 139 LITER / 20 BAR VESSELS FILLED WITH A DESICCANT. • COOLING COMPRESSOR PISTON TYPE SABROE OPERATING WITH R717 REFRIGERANT WITH EVAPORATIVE REFRIGERANT CONDENSER • CO2 LIQUEFIER CONSISTING OF SHELL-AND-TUBE TYPE CO2 CONDENSER AND NH3 EVAPORATOR. SEPARATION OF NON-CONDENSABLE INERT GASES IN MADE WITH A PURGE SYSTEM • STEAM HEATED EVAPORATOR FOR LIQUID CO2, CAPACITY 2200 KG/H CO2 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • GAS ANALYZERS OPERATION DESCRIPTION OF THIS CO2 RECOVER PLANT GASEOUS CARBON DIOXIDE (CO2) IS FED FROM THE FERMENTATION TANK THROUGH THE FOAM SEPARATOR WHERE FERMENTATION FOAM IS REMOVED AND GAS IS PUMPED TO THE INTERMEDIATE 50 M3 CO2 BUFFER STORAGE BALLOON. FROM THIS INTERMEDIATE STORAGE GAS IS FED INTO THE SCRUBBER WHERE THE CO2 IS CLEANED. SCRUBBER IS DESIGNED TO CLEAN THE CO2 FROM ETHANOL AND OTHER IMPURITIES WITH A COUNTER CURRENT CLEAN WATER FLOW. PURIFIED GAS IS FED INTO INTERCOOLED PISTON TYPE CO2 COMPRESSOR WHERE IT IS COMPRESSED IN TWO STAGES INTO 18.5 BAR. COMPRESSED GAS (CO2) PASSES THROUGH DOUBLE ACTING, ELECTRIC HEATED ACTIVE COAL CLEANING FILTERS AND AFTER THAT THROUGH DOUBLE ACTING DESICCANT DYERS. THESE FILTERS ARE CLEARING AND DRAINING OF CO2, WHICH IS THEN FED TO THE LIQUEFACTION PLANT. LIQUEFACTION PLANT CONSIST A CONDENSER, EVAPORATOR AND CHILLER RUNNING ON R717 REFRIGERANT. REFRIGERANT IS COMPRESSED WITH A PISTON COOLING COMPRESSOR AND IT EVAPORATES IN THE CONDENSER AND COOLS CO2 AT - 30 0 C, ALLOWING THE CONDENSATION OF CO2 AT A PRESSURE OF 17.4 BAR. NON-CONDENSABLE GASES WILL BE EXTRACTED FROM LIQUID CO2 IN THIS STAGE. CLEAN, LIQUEFIED CARBON DIOXIDE IS PUMPED INTO THE STORAGE TANK (NOT A PART OF THIS PLANT) AND WHERE IT IS FED INTO THE EVAPORATOR FOR USAGE IN THE PLANT. IN THE EVAPORATOR, THE LIQUID CO2 IS HEATED STEAM AND IT IS VAPORIZED AND CONVERTED INTO THE GASEOUS CO2. AT A PRESSURE OF 17.5 BAR AND PRESSURE IS FURTHER REDUCED TO SUITABLE FOR PLANT SYSTEM.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.250 €
Ubicación: Land-variovac rotary traysealer, type: rotarius vg, serial number: 038.06, machine number: 038, year of construction: 2006, 230/400 v, 50 hz, 13 a, 7 kw, 6 bar, dye: (3x) 223 mm x 88 mm and (1x) 223 mm x 223 mm, film width: 335 mm, busch vacuum pump, total dimensions: 1180 mm x 1160 mm x 1300 mm. VARIOVAC ROTARY TRAYSEALER, TYPE: ROTARIUS VG, SERIAL NUMBER: 038.06, MACHINE NUMBER: 038, YEAR OF CONSTRUCTION: 2006, 230/400 V, 50 HZ, 13 A, 7 KW, 6 BAR, DYE: (3X) 223 MM X 88 MM AND (1X) 223 MM X 223 MM, FILM WIDTH: 335 MM, BUSCH VACUUM PUMP, TOTAL DIMENSIONS: 1180 MM X 1160 MM X 1300 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-co2 recovery plant union engineering 500 kg/h
  
the recovery plant is specially designed to recover co2 from fermentation processes at breweries. this complete co2 plant was delivered by union engineering in 1999 and it has nominal co2 removal capacity of 500 kg/h. co2 compressor is two stage mehrer piston compressor and refrigeration compressor is sobroe operating with ammonia (r717). the plant operation is controlled with siemens s7-300 plc. the delivery includes following main components: 
 
•	foam trap, material aisi 304
•	water scrubber for co 2 gas flushing mainly from alcohol, capacity 1200 kg/h co2, material aisi 304 (common with another 500 kg co2 recovery system)
•	inflammable co2 gas storage, 50 m3 open type, material reinforced pvc (common with another 500 kg co2 recovery system) 
•	co2 compressor, type josef mehrer tzw 70, capacity 550 kg/h co2, with 55 kw/620 rpm electric motors. radiator cooler for cooling waters. 
•	activated carbon filter for removing odors, consisting of 2 identical 260 liter / 20 bar vessels filled with active carbon, material aisi 304, equipped with a blower and air heating element.
•	dehydrator for drying of gas to a dew point, consisting of 2 identical 139 liter / 20 bar vessels filled with a desiccant.
•	cooling compressor piston type sabroe operating with r717 refrigerant with evaporative refrigerant condenser
•	co2 liquefier consisting of shell-and-tube type co2 condenser and nh3 evaporator. separation of non-condensable inert gases in made with a purge system
•	steam heated evaporator for liquid co2, capacity 2200 kg/h co2 (common with another 500 kg co2 recovery system) 
•	gas analyzers 
operation description of this co2 recover plant 
gaseous carbon dioxide (co2) is fed from the fermentation tank through the foam separator where fermentation foam is removed and gas is pumped to the intermediate 50 m3 co2 buffer storage balloon. from this intermediate storage gas is fed into the scrubber where the co2 is cleaned. scrubber is designed to clean the co2 from ethanol and other impurities with a counter current clean water flow.
 
purified gas is fed into intercooled piston type co2 compressor where it is compressed in two stages into 18.5 bar. compressed gas (co2) passes through double acting, electric heated active coal cleaning filters and after that through double acting desiccant dyers. these filters are clearing and draining of co2, which is then fed to the liquefaction plant. liquefaction plant consist a condenser, evaporator and chiller running on r717 refrigerant. refrigerant is compressed with a piston cooling compressor and it evaporates in the condenser and cools co2 at - 30 0 c, allowing the condensation of co2 at a pressure of 17.4 bar. non-condensable gases will be extracted from liquid co2 in this stage. clean, liquefied carbon dioxide is pumped into the storage tank (not a part of this plant) and where it is fed into the evaporator for usage in the plant. in the evaporator, the liquid co2 is heated steam and it is vaporized and converted into the gaseous co2. at a pressure of 17.5 bar and pressure is further reduced to suitable for plant system.
 CO2 RECOVERY PLANT UNION ENGINEERING 500 KG/H THE RECOVERY PLANT IS SPECIALLY DESIGNED TO RECOVER CO2 FROM FERMENTATION PROCESSES AT BREWERIES. THIS COMPLETE CO2 PLANT WAS DELIVERED BY UNION ENGINEERING IN 1999 AND IT HAS NOMINAL CO2 REMOVAL CAPACITY OF 500 KG/H. CO2 COMPRESSOR IS TWO STAGE MEHRER PISTON COMPRESSOR AND REFRIGERATION COMPRESSOR IS SOBROE OPERATING WITH AMMONIA (R717). THE PLANT OPERATION IS CONTROLLED WITH SIEMENS S7-300 PLC. THE DELIVERY INCLUDES FOLLOWING MAIN COMPONENTS: • FOAM TRAP, MATERIAL AISI 304 • WATER SCRUBBER FOR CO 2 GAS FLUSHING MAINLY FROM ALCOHOL, CAPACITY 1200 KG/H CO2, MATERIAL AISI 304 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • INFLAMMABLE CO2 GAS STORAGE, 50 M3 OPEN TYPE, MATERIAL REINFORCED PVC (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • CO2 COMPRESSOR, TYPE JOSEF MEHRER TZW 70, CAPACITY 550 KG/H CO2, WITH 55 KW/620 RPM ELECTRIC MOTORS. RADIATOR COOLER FOR COOLING WATERS. • ACTIVATED CARBON FILTER FOR REMOVING ODORS, CONSISTING OF 2 IDENTICAL 260 LITER / 20 BAR VESSELS FILLED WITH ACTIVE CARBON, MATERIAL AISI 304, EQUIPPED WITH A BLOWER AND AIR HEATING ELEMENT. • DEHYDRATOR FOR DRYING OF GAS TO A DEW POINT, CONSISTING OF 2 IDENTICAL 139 LITER / 20 BAR VESSELS FILLED WITH A DESICCANT. • COOLING COMPRESSOR PISTON TYPE SABROE OPERATING WITH R717 REFRIGERANT WITH EVAPORATIVE REFRIGERANT CONDENSER • CO2 LIQUEFIER CONSISTING OF SHELL-AND-TUBE TYPE CO2 CONDENSER AND NH3 EVAPORATOR. SEPARATION OF NON-CONDENSABLE INERT GASES IN MADE WITH A PURGE SYSTEM • STEAM HEATED EVAPORATOR FOR LIQUID CO2, CAPACITY 2200 KG/H CO2 (COMMON WITH ANOTHER 500 KG CO2 RECOVERY SYSTEM) • GAS ANALYZERS OPERATION DESCRIPTION OF THIS CO2 RECOVER PLANT GASEOUS CARBON DIOXIDE (CO2) IS FED FROM THE FERMENTATION TANK THROUGH THE FOAM SEPARATOR WHERE FERMENTATION FOAM IS REMOVED AND GAS IS PUMPED TO THE INTERMEDIATE 50 M3 CO2 BUFFER STORAGE BALLOON. FROM THIS INTERMEDIATE STORAGE GAS IS FED INTO THE SCRUBBER WHERE THE CO2 IS CLEANED. SCRUBBER IS DESIGNED TO CLEAN THE CO2 FROM ETHANOL AND OTHER IMPURITIES WITH A COUNTER CURRENT CLEAN WATER FLOW. PURIFIED GAS IS FED INTO INTERCOOLED PISTON TYPE CO2 COMPRESSOR WHERE IT IS COMPRESSED IN TWO STAGES INTO 18.5 BAR. COMPRESSED GAS (CO2) PASSES THROUGH DOUBLE ACTING, ELECTRIC HEATED ACTIVE COAL CLEANING FILTERS AND AFTER THAT THROUGH DOUBLE ACTING DESICCANT DYERS. THESE FILTERS ARE CLEARING AND DRAINING OF CO2, WHICH IS THEN FED TO THE LIQUEFACTION PLANT. LIQUEFACTION PLANT CONSIST A CONDENSER, EVAPORATOR AND CHILLER RUNNING ON R717 REFRIGERANT. REFRIGERANT IS COMPRESSED WITH A PISTON COOLING COMPRESSOR AND IT EVAPORATES IN THE CONDENSER AND COOLS CO2 AT - 30 0 C, ALLOWING THE CONDENSATION OF CO2 AT A PRESSURE OF 17.4 BAR. NON-CONDENSABLE GASES WILL BE EXTRACTED FROM LIQUID CO2 IN THIS STAGE. CLEAN, LIQUEFIED CARBON DIOXIDE IS PUMPED INTO THE STORAGE TANK (NOT A PART OF THIS PLANT) AND WHERE IT IS FED INTO THE EVAPORATOR FOR USAGE IN THE PLANT. IN THE EVAPORATOR, THE LIQUID CO2 IS HEATED STEAM AND IT IS VAPORIZED AND CONVERTED INTO THE GASEOUS CO2. AT A PRESSURE OF 17.5 BAR AND PRESSURE IS FURTHER REDUCED TO SUITABLE FOR PLANT SYSTEM.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 3.000 €
Ubicación: Land-kramer + grebe thermoformer, type: va430l, fabrication number: 500/288, year of construction: 1983, 380 v, 3 ph, 50 hz, 20 a, dye: (8x) 225 mm x 35 mm, plastic wired belt, belt width: 370 mm, busch vacuum pump, type: 040-136, 40 m³ per hour, total dimensions: 6900 mm x 1050 mm x 1900 mm. KRAMER + GREBE THERMOFORMER, TYPE: VA430L, FABRICATION NUMBER: 500/288, YEAR OF CONSTRUCTION: 1983, 380 V, 3 PH, 50 HZ, 20 A, DYE: (8X) 225 MM X 35 MM, PLASTIC WIRED BELT, BELT WIDTH: 370 MM, BUSCH VACUUM PUMP, TYPE: 040-136, 40 M³ PER HOUR, TOTAL DIMENSIONS: 6900 MM X 1050 MM X 1900 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-product number: 1379
type: evo-390vg
serial number: 3458
year of construction: 2008
capacity: max 12 cycles/min.
dye 1: faerch 2190-53h
dye 2: fearch 2274-53h
power: 3 x 400v, 50hz, 51kva
pneumatics: 0.6mpa, 600 l/min.
dimensions: 7500 x 1260 x 2400 mm
weight: 6900 kg 
including 4 pcs. tool trolley cps/r PRODUCT NUMBER: 1379 TYPE: EVO-390VG SERIAL NUMBER: 3458 YEAR OF CONSTRUCTION: 2008 CAPACITY: MAX 12 CYCLES/MIN. DYE 1: FAERCH 2190-53H DYE 2: FEARCH 2274-53H POWER: 3 X 400V, 50HZ, 51KVA PNEUMATICS: 0.6MPA, 600 L/MIN. DIMENSIONS: 7500 X 1260 X 2400 MM WEIGHT: 6900 KG INCLUDING 4 PCS. TOOL TROLLEY CPS/R
Vendedor: Van Zutphen BV
Año de construcción: usado
Precio: used machinery auction RESALE 9.000 €
Ubicación: Land-sealpac traysealer with tray denester, type: sealpac 800+, serial number: tvg 01 1403 01, year of construction: 2006, 3x 400/230 v, 10 kw, dye: (6x) 4 cup a 50 mm x 63 mm, dimensions: 13500 mm x 850 mm x 2100 mm, tool trolley, dimensions: 1400 mm x 1000 mm x 1450 mm, 2 tool racks, dimensions: (2x) 2550 mm x 730 mm x 1600 mm, 7 pallets with dyes and parts, dyes: (7x) 3 cup a 63 mm x 102 mm, (8x) round cup 73 mm, (8x) cup 84 mm x 150 mm and (10x) cup 63 mm x 102 mm. wire belt broken. SEALPAC TRAYSEALER WITH TRAY DENESTER, TYPE: SEALPAC 800+, SERIAL NUMBER: TVG 01 1403 01, YEAR OF CONSTRUCTION: 2006, 3X 400/230 V, 10 KW, DYE: (6X) 4 CUP A 50 MM X 63 MM, DIMENSIONS: 13500 MM X 850 MM X 2100 MM, TOOL TROLLEY, DIMENSIONS: 1400 MM X 1000 MM X 1450 MM, 2 TOOL RACKS, DIMENSIONS: (2X) 2550 MM X 730 MM X 1600 MM, 7 PALLETS WITH DYES AND PARTS, DYES: (7X) 3 CUP A 63 MM X 102 MM, (8X) ROUND CUP 73 MM, (8X) CUP 84 MM X 150 MM AND (10X) CUP 63 MM X 102 MM. WIRE BELT BROKEN.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-capacity: 225kg, max. operational temperature: 150°c, controls: then amc-e.  CAPACITY: 225KG, MAX. OPERATIONAL TEMPERATURE: 150°C, CONTROLS: THEN AMC-E.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-europack traysealer, type: d2, 2 lanes, dye: (2x) 160 mm x 160 mm, roller width: 450 mm, total dimensions: 2750 mm x 900 mm x 1580 mm. without vacuum pump. EUROPACK TRAYSEALER, TYPE: D2, 2 LANES, DYE: (2X) 160 MM X 160 MM, ROLLER WIDTH: 450 MM, TOTAL DIMENSIONS: 2750 MM X 900 MM X 1580 MM. WITHOUT VACUUM PUMP.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-mcs jet dyeing machine, model multiflow. year 2002
capacity 900 kg 
6 tubes MCS JET DYEING MACHINE, MODEL MULTIFLOW. YEAR 2002 CAPACITY 900 KG 6 TUBES
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 800 €
Ubicación: Land-henkelman mobile traysealer, type: vortex, machine number: v1011027, year of construction: 2010, 400 v, 3 ph, 50 hz, 6 a, 4 kw, dye: (2x) 220 mm x 150 mm, with busch vacuum pump, type: r5, total dimensions: 920 mm x 620 mm x 1500 mm. HENKELMAN MOBILE TRAYSEALER, TYPE: VORTEX, MACHINE NUMBER: V1011027, YEAR OF CONSTRUCTION: 2010, 400 V, 3 PH, 50 HZ, 6 A, 4 KW, DYE: (2X) 220 MM X 150 MM, WITH BUSCH VACUUM PUMP, TYPE: R5, TOTAL DIMENSIONS: 920 MM X 620 MM X 1500 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-mcs jet dyeing machine model ef-1u ht. year 2009

capacity 200 kg MCS JET DYEING MACHINE MODEL EF-1U HT. YEAR 2009 CAPACITY 200 KG
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 750 €
Ubicación: Land-prefered packaging traysealer, model: fire 500, serial number: 003/13, year of construction: 2013, 400 v, 50-60 hz, film width: 435 mm, total dimensions: 3050 mm x 1050 mm x 1680 mm. missing dyes, without vacuum pumps. PREFERED PACKAGING TRAYSEALER, MODEL: FIRE 500, SERIAL NUMBER: 003/13, YEAR OF CONSTRUCTION: 2013, 400 V, 50-60 HZ, FILM WIDTH: 435 MM, TOTAL DIMENSIONS: 3050 MM X 1050 MM X 1680 MM. MISSING DYES, WITHOUT VACUUM PUMPS.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-mcs beam dyeing machine model at130 1400x1800. year 2001

with termoelettronica ct 301-lan programmer MCS BEAM DYEING MACHINE MODEL AT130 1400X1800. YEAR 2001 WITH TERMOELETTRONICA CT 301-LAN PROGRAMMER
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 4.000 €
Ubicación: Land-sealpac traysealer, type: sealpac 350, serial number: tvg 02 1073 01, year of construction: 2004, 3 x 400/230 v, 3 kw, weight: 450 kg, dye: 300 mm x 246 mm, total dimensions: 3400 mm x 800 mm x 1800 mm, busch vacuum pump, type: ra 0063 e 5z1, number: 060113931, year of construction: 2006, p: 0.5 hpa (mbar), capacity: 63 m³ per hour, dimensions vacuum pump: 600 mm x 400 mm x 350 mm. SEALPAC TRAYSEALER, TYPE: SEALPAC 350, SERIAL NUMBER: TVG 02 1073 01, YEAR OF CONSTRUCTION: 2004, 3 X 400/230 V, 3 KW, WEIGHT: 450 KG, DYE: 300 MM X 246 MM, TOTAL DIMENSIONS: 3400 MM X 800 MM X 1800 MM, BUSCH VACUUM PUMP, TYPE: RA 0063 E 5Z1, NUMBER: 060113931, YEAR OF CONSTRUCTION: 2006, P: 0.5 HPA (MBAR), CAPACITY: 63 M³ PER HOUR, DIMENSIONS VACUUM PUMP: 600 MM X 400 MM X 350 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-una machines for 4 bobin
perfect for laboratory or little production UNA MACHINES FOR 4 BOBIN PERFECT FOR LABORATORY OR LITTLE PRODUCTION
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Precio: used machinery auction RESALE 3.500 €
Ubicación: Land-sealpac traysealer, type: sealpac mini, serial number: tvg 03 925 01, year of construction: 2004, 3 x 230/400 v, 3 kw, weight: 270 kg, dye: 303 mm x 244 mm, film width: 310 mm, vacuum/gasflush, busch vacuum pump, type: rc 0063 e 4s3, number: 05001883, year of construction: 2005, p: 20 hpa (mbar), total dimensions: 1000 mm x 1000 mm x 1900 mm. including 2 extra dyes, dyes: (2x) 175 mm x 123 mm and (2x) 214 mm x 127 mm. without gas bottles. SEALPAC TRAYSEALER, TYPE: SEALPAC MINI, SERIAL NUMBER: TVG 03 925 01, YEAR OF CONSTRUCTION: 2004, 3 X 230/400 V, 3 KW, WEIGHT: 270 KG, DYE: 303 MM X 244 MM, FILM WIDTH: 310 MM, VACUUM/GASFLUSH, BUSCH VACUUM PUMP, TYPE: RC 0063 E 4S3, NUMBER: 05001883, YEAR OF CONSTRUCTION: 2005, P: 20 HPA (MBAR), TOTAL DIMENSIONS: 1000 MM X 1000 MM X 1900 MM. INCLUDING 2 EXTRA DYES, DYES: (2X) 175 MM X 123 MM AND (2X) 214 MM X 127 MM. WITHOUT GAS BOTTLES.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-thies ht jet dyeing machine model trd. year 1997

approx. capacity 150 kg
1 rope 
setex programmer
 THIES HT JET DYEING MACHINE MODEL TRD. YEAR 1997 APPROX. CAPACITY 150 KG 1 ROPE SETEX PROGRAMMER
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 4.000 €
Ubicación: Land-sealpac traysealer, model: sealpac 750, s/s infeed chain conveyor with dividers, distance between dividers: 175 mm, divider height: 20 mm, film width: 220 mm, dye: (5x) 155 m mx 135 mm, outfeed wire belt, belt width: 160 mm, total dimensions: 6100 mm x 750 mm x 1900 mm. including 5 pallets with 40.000 trays and 13.000 meters of film. SEALPAC TRAYSEALER, MODEL: SEALPAC 750, S/S INFEED CHAIN CONVEYOR WITH DIVIDERS, DISTANCE BETWEEN DIVIDERS: 175 MM, DIVIDER HEIGHT: 20 MM, FILM WIDTH: 220 MM, DYE: (5X) 155 M MX 135 MM, OUTFEED WIRE BELT, BELT WIDTH: 160 MM, TOTAL DIMENSIONS: 6100 MM X 750 MM X 1900 MM. INCLUDING 5 PALLETS WITH 40.000 TRAYS AND 13.000 METERS OF FILM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-thies ht jet dyeing machine model trd. year 1998

approx. capacity 300 kg
2 ropes. possibility to work 1 or 2 ropes
setex programmer THIES HT JET DYEING MACHINE MODEL TRD. YEAR 1998 APPROX. CAPACITY 300 KG 2 ROPES. POSSIBILITY TO WORK 1 OR 2 ROPES SETEX PROGRAMMER
Vendedor: Inautex
Año de construcción: usado
Precio: used machinery auction RESALE 5.000 €
Ubicación: Land-tiromat krämer + grebe thermoformer, type: 660, machine number: 665/0245, year of construction: 1999, 230/400 v, 3 ph, 50 hz, 40 a, bottom film: 423 mm, top film: 416 mm, packages: 600 mm x 400 mm, busch vacuum pump, type: ra 0302 d 5zi cuxx, number: c9904000732, capacity: 300 m³ per hour, total dimensions: 7100 mm x 1200 mm x 2000 mm, rietschle suction device for rest film, type: cevf 3718-3 (31), year of construction: 1999, trolley with parts and dyes, dye: (2x) 584 mm x 180 mm, (3x) 377 mm x 184 mm, (4x) 285 mm x 180 mm, dimensions trolley: 680 mm x 490 mm x 1500 mm. TIROMAT KRäMER + GREBE THERMOFORMER, TYPE: 660, MACHINE NUMBER: 665/0245, YEAR OF CONSTRUCTION: 1999, 230/400 V, 3 PH, 50 HZ, 40 A, BOTTOM FILM: 423 MM, TOP FILM: 416 MM, PACKAGES: 600 MM X 400 MM, BUSCH VACUUM PUMP, TYPE: RA 0302 D 5ZI CUXX, NUMBER: C9904000732, CAPACITY: 300 M³ PER HOUR, TOTAL DIMENSIONS: 7100 MM X 1200 MM X 2000 MM, RIETSCHLE SUCTION DEVICE FOR REST FILM, TYPE: CEVF 3718-3 (31), YEAR OF CONSTRUCTION: 1999, TROLLEY WITH PARTS AND DYES, DYE: (2X) 584 MM X 180 MM, (3X) 377 MM X 184 MM, (4X) 285 MM X 180 MM, DIMENSIONS TROLLEY: 680 MM X 490 MM X 1500 MM.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Ubicación: Land-product number: 1338
type: a10
serial number: 01-2817
year of construction: 2014
power: 3 x 400v, 50hz, 15kw
pneumatics: 6 - 10 bar
capacity: up to max. 14 cycles/minute
water: 8 l/min
dimensions: 9550 x 1050 x 2280 mm
weight: 2700 kg
dye: p2207, faerch 3047 & 3046 
for vacuum and gas flush
including tool trolley PRODUCT NUMBER: 1338 TYPE: A10 SERIAL NUMBER: 01-2817 YEAR OF CONSTRUCTION: 2014 POWER: 3 X 400V, 50HZ, 15KW PNEUMATICS: 6 - 10 BAR CAPACITY: UP TO MAX. 14 CYCLES/MINUTE WATER: 8 L/MIN DIMENSIONS: 9550 X 1050 X 2280 MM WEIGHT: 2700 KG DYE: P2207, FAERCH 3047 & 3046 FOR VACUUM AND GAS FLUSH INCLUDING TOOL TROLLEY
Vendedor: Van Zutphen BV
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2000 x 900 x 900 mm<br/>description: lot composed of 8 (q.ty 8) tires for agricultural use<br> super rib tractor tubeless design<br> frame 8 pr<br> see photos WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 900 X 900 MM
DESCRIPTION: LOT COMPOSED OF 8 (Q.TY 8) TIRES FOR AGRICULTURAL USE
SUPER RIB TRACTOR TUBELESS DESIGN
FRAME 8 PR
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-textile finish line and dyeing line

 

1. rolling machine

make:roll tech(korea)

year:2011

 rubber roller : ?165×2,300?×3ea

spnge roller : ?165×2,300?×2ea

 

2 large centrifugal dehydrator

make:manduk(korea)

year:2011

basket size : 1,520×1200(h)?

basket cap' : 500?

motor : 18.5?

rpm : 0 - 700r.p.m

 

3 turning machine

make:total(korea)

year:2011

type : vertical

turbo blower

 -speed : 3,500rpm

 -power : 7.5?

 

4 cck-? system

make:daerim(korea)

year:2011

(computer color kitchen)system

 (1)hardware

 model:color focus-?(dlf-124)

 124dyes type (1000cc×24ea,500cc×100ea)

(2)software

(3)stock solution maker

model:dye focus-?(dlf-071)

storage tank : 5l(hot water),

            5l(cold water)

5 ir dyeing machine x 2sets

make:daerim(korea)

year:2011

type: infrared dye

model:dl-6000(starlet-3)

standard items:24hanging

50cc-23ea,sensor pot-1ea

temp.:25~140?

cooling :fan air circulation

rpm:0~60rpm/min

 

6 water bath shaker

 make:daerim(korea)

year:2011

flask holder:250?×60ea-2bath

temperature range:25~100?

reciprocating speed:25~150rpm/min

speed controller:1set

7 water setting machine

make: b.h(korea)

year:2011

 

8 turn tablex 4sets

make: b.h(korea)

year:2011

plate: 9t×?2,180?

      9t×?2,300?

 

9 dyeing machine

make: b.h(korea)

year:2011

cap':400?

max.temp:140?

max.press:4?/?

 

10 automatic packing machine

make:hyosan(korea)

year;2011

w)belt conveyor:  500(w)×3,000(l)?

 

11 sun-super s. tenter

make:ilsung(korea)

year;2011

chmaber : 8 c/b

working width : 2300?

speed : 120m/min

 

12 high pressure dyeing machine

make:daesung(korea)

year;2011

cap' : 500?

 

13 textile machine

make:bianco(italy)

year;2011

opening & slitting line

roller width: 2,400m/m

fabric width: 2,200m/m

air pressure: 6bar

max.speed : 80m/min


  
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
  TEXTILE FINISH LINE AND DYEING LINE 1. ROLLING MACHINE MAKE:ROLL TECH(KOREA) YEAR:2011 RUBBER ROLLER : ?165×2,300?×3EA SPNGE ROLLER : ?165×2,300?×2EA 2 LARGE CENTRIFUGAL DEHYDRATOR MAKE:MANDUK(KOREA) YEAR:2011 BASKET SIZE : 1,520×1200(H)? BASKET CAP' : 500? MOTOR : 18.5? RPM : 0 - 700R.P.M 3 TURNING MACHINE MAKE:TOTAL(KOREA) YEAR:2011 TYPE : VERTICAL TURBO BLOWER -SPEED : 3,500RPM -POWER : 7.5? 4 CCK-? SYSTEM MAKE:DAERIM(KOREA) YEAR:2011 (COMPUTER COLOR KITCHEN)SYSTEM (1)HARDWARE MODEL:COLOR FOCUS-?(DLF-124) 124DYES TYPE (1000CC×24EA,500CC×100EA) (2)SOFTWARE (3)STOCK SOLUTION MAKER MODEL:DYE FOCUS-?(DLF-071) STORAGE TANK : 5L(HOT WATER), 5L(COLD WATER) 5 IR DYEING MACHINE X 2SETS MAKE:DAERIM(KOREA) YEAR:2011 TYPE: INFRARED DYE MODEL:DL-6000(STARLET-3) STANDARD ITEMS:24HANGING 50CC-23EA,SENSOR POT-1EA TEMP.:25~140? COOLING :FAN AIR CIRCULATION RPM:0~60RPM/MIN 6 WATER BATH SHAKER MAKE:DAERIM(KOREA) YEAR:2011 FLASK HOLDER:250?×60EA-2BATH TEMPERATURE RANGE:25~100? RECIPROCATING SPEED:25~150RPM/MIN SPEED CONTROLLER:1SET 7 WATER SETTING MACHINE MAKE: B.H(KOREA) YEAR:2011 8 TURN TABLEX 4SETS MAKE: B.H(KOREA) YEAR:2011 PLATE: 9T×?2,180? 9T×?2,300? 9 DYEING MACHINE MAKE: B.H(KOREA) YEAR:2011 CAP':400? MAX.TEMP:140? MAX.PRESS:4?/? 10 AUTOMATIC PACKING MACHINE MAKE:HYOSAN(KOREA) YEAR;2011 W)BELT CONVEYOR: 500(W)×3,000(L)? 11 SUN-SUPER S. TENTER MAKE:ILSUNG(KOREA) YEAR;2011 CHMABER : 8 C/B WORKING WIDTH : 2300? SPEED : 120M/MIN 12 HIGH PRESSURE DYEING MACHINE MAKE:DAESUNG(KOREA) YEAR;2011 CAP' : 500? 13 TEXTILE MACHINE MAKE:BIANCO(ITALY) YEAR;2011 OPENING & SLITTING LINE ROLLER WIDTH: 2,400M/M FABRIC WIDTH: 2,200M/M AIR PRESSURE: 6BAR MAX.SPEED : 80M/MIN BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2000 x 900 x 900 mm<br/>description: lot composed of 8 (q.ty 8) tires for agricultural use<br> super rib tractor tubeless design<br> frame 8 pr<br> see photos WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 900 X 900 MM
DESCRIPTION: LOT COMPOSED OF 8 (Q.TY 8) TIRES FOR AGRICULTURAL USE
SUPER RIB TRACTOR TUBELESS DESIGN
FRAME 8 PR
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-textile finish line and dyeing line

 

1. rolling machine

make:roll tech(korea)

year:2011

 rubber roller : ?165×2,300?×3ea

spnge roller : ?165×2,300?×2ea

 

2 large centrifugal dehydrator

make:manduk(korea)

year:2011

basket size : 1,520×1200(h)?

basket cap' : 500?

motor : 18.5?

rpm : 0 - 700r.p.m

 

3 turning machine

make:total(korea)

year:2011

type : vertical

turbo blower

 -speed : 3,500rpm

 -power : 7.5?

 

4 cck-? system

make:daerim(korea)

year:2011

(computer color kitchen)system

 (1)hardware

 model:color focus-?(dlf-124)

 124dyes type (1000cc×24ea,500cc×100ea)

(2)software

(3)stock solution maker

model:dye focus-?(dlf-071)

storage tank : 5l(hot water),

            5l(cold water)

5 ir dyeing machine x 2sets

make:daerim(korea)

year:2011

type: infrared dye

model:dl-6000(starlet-3)

standard items:24hanging

50cc-23ea,sensor pot-1ea

temp.:25~140?

cooling :fan air circulation

rpm:0~60rpm/min

 

6 water bath shaker

 make:daerim(korea)

year:2011

flask holder:250?×60ea-2bath

temperature range:25~100?

reciprocating speed:25~150rpm/min

speed controller:1set

7 water setting machine

make: b.h(korea)

year:2011

 

8 turn tablex 4sets

make: b.h(korea)

year:2011

plate: 9t×?2,180?

      9t×?2,300?

 

9 dyeing machine

make: b.h(korea)

year:2011

cap':400?

max.temp:140?

max.press:4?/?

 

10 automatic packing machine

make:hyosan(korea)

year;2011

w)belt conveyor:  500(w)×3,000(l)?

 

11 sun-super s. tenter

make:ilsung(korea)

year;2011

chmaber : 8 c/b

working width : 2300?

speed : 120m/min

 

12 high pressure dyeing machine

make:daesung(korea)

year;2011

cap' : 500?

 

13 textile machine

make:bianco(italy)

year;2011

opening & slitting line

roller width: 2,400m/m

fabric width: 2,200m/m

air pressure: 6bar

max.speed : 80m/min

 TEXTILE FINISH LINE AND DYEING LINE 1. ROLLING MACHINE MAKE:ROLL TECH(KOREA) YEAR:2011 RUBBER ROLLER : ?165×2,300?×3EA SPNGE ROLLER : ?165×2,300?×2EA 2 LARGE CENTRIFUGAL DEHYDRATOR MAKE:MANDUK(KOREA) YEAR:2011 BASKET SIZE : 1,520×1200(H)? BASKET CAP' : 500? MOTOR : 18.5? RPM : 0 - 700R.P.M 3 TURNING MACHINE MAKE:TOTAL(KOREA) YEAR:2011 TYPE : VERTICAL TURBO BLOWER -SPEED : 3,500RPM -POWER : 7.5? 4 CCK-? SYSTEM MAKE:DAERIM(KOREA) YEAR:2011 (COMPUTER COLOR KITCHEN)SYSTEM (1)HARDWARE MODEL:COLOR FOCUS-?(DLF-124) 124DYES TYPE (1000CC×24EA,500CC×100EA) (2)SOFTWARE (3)STOCK SOLUTION MAKER MODEL:DYE FOCUS-?(DLF-071) STORAGE TANK : 5L(HOT WATER), 5L(COLD WATER) 5 IR DYEING MACHINE X 2SETS MAKE:DAERIM(KOREA) YEAR:2011 TYPE: INFRARED DYE MODEL:DL-6000(STARLET-3) STANDARD ITEMS:24HANGING 50CC-23EA,SENSOR POT-1EA TEMP.:25~140? COOLING :FAN AIR CIRCULATION RPM:0~60RPM/MIN 6 WATER BATH SHAKER MAKE:DAERIM(KOREA) YEAR:2011 FLASK HOLDER:250?×60EA-2BATH TEMPERATURE RANGE:25~100? RECIPROCATING SPEED:25~150RPM/MIN SPEED CONTROLLER:1SET 7 WATER SETTING MACHINE MAKE: B.H(KOREA) YEAR:2011 8 TURN TABLEX 4SETS MAKE: B.H(KOREA) YEAR:2011 PLATE: 9T×?2,180? 9T×?2,300? 9 DYEING MACHINE MAKE: B.H(KOREA) YEAR:2011 CAP':400? MAX.TEMP:140? MAX.PRESS:4?/? 10 AUTOMATIC PACKING MACHINE MAKE:HYOSAN(KOREA) YEAR;2011 W)BELT CONVEYOR: 500(W)×3,000(L)? 11 SUN-SUPER S. TENTER MAKE:ILSUNG(KOREA) YEAR;2011 CHMABER : 8 C/B WORKING WIDTH : 2300? SPEED : 120M/MIN 12 HIGH PRESSURE DYEING MACHINE MAKE:DAESUNG(KOREA) YEAR;2011 CAP' : 500? 13 TEXTILE MACHINE MAKE:BIANCO(ITALY) YEAR;2011 OPENING & SLITTING LINE ROLLER WIDTH: 2,400M/M FABRIC WIDTH: 2,200M/M AIR PRESSURE: 6BAR MAX.SPEED : 80M/MIN
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2000 x 900 x 900 mm<br/>description: lot composed of 8 (q.ty 8) tires for agricultural use<br> super rib tractor tubeless design<br> frame 8 pr<br> see photos WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 900 X 900 MM
DESCRIPTION: LOT COMPOSED OF 8 (Q.TY 8) TIRES FOR AGRICULTURAL USE
SUPER RIB TRACTOR TUBELESS DESIGN
FRAME 8 PR
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-air compressor 40 bar atelier francois ce68a 35 m3/h  
  
this three-stage intercooled high pressure air compressor was built in year 2005 and it is till installed but operation was stopped in year 2014. this compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. there is no piston rod packing on 3rd stage, which eliminate sealing against 40bar. single acting 2nd and 3rd stage, requiring few valves. smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. the delivery includes stainless steel 40 bar air dyer with integrated 1micron filter, dew point alarm and hankinson air dryer and vertical hot galvanized 40 bar air receiver and control cabinet with af pc control system. 
  
technical data:
 
manufacturer:	atelier francois belgium
manufacturing year:	2005 
operating hours	approx.: 40 000
fad (free air delivery):	35 m3/min at 40 bar
40 bar air bottle:	1000 l
40 bar air bottle:	hankinson
compressor rotation speed:	480 rpm  
electric motor:	355 kw  AIR COMPRESSOR 40 BAR ATELIER FRANCOIS CE68A 35 M3/H THIS THREE-STAGE INTERCOOLED HIGH PRESSURE AIR COMPRESSOR WAS BUILT IN YEAR 2005 AND IT IS TILL INSTALLED BUT OPERATION WAS STOPPED IN YEAR 2014. THIS COMPRESSOR IS VERY SLOW SPEED AND IT HAS ONLY TWO CROSS-HEAD ASSEMBLIES, TWO CONNECTING RODS AND ASSOCIATED BEARINGS. THERE IS NO PISTON ROD PACKING ON 3RD STAGE, WHICH ELIMINATE SEALING AGAINST 40BAR. SINGLE ACTING 2ND AND 3RD STAGE, REQUIRING FEW VALVES. SMALLER 2ND AND 3RD STAGES ARE HORIZONTAL POSITION TO OPTIMIZE THE PISTON RING LIFE. THE DELIVERY INCLUDES STAINLESS STEEL 40 BAR AIR DYER WITH INTEGRATED 1MICRON FILTER, DEW POINT ALARM AND HANKINSON AIR DRYER AND VERTICAL HOT GALVANIZED 40 BAR AIR RECEIVER AND CONTROL CABINET WITH AF PC CONTROL SYSTEM. TECHNICAL DATA: MANUFACTURER: ATELIER FRANCOIS BELGIUM MANUFACTURING YEAR: 2005 OPERATING HOURS APPROX.: 40 000 FAD (FREE AIR DELIVERY): 35 M3/MIN AT 40 BAR 40 BAR AIR BOTTLE: 1000 L 40 BAR AIR BOTTLE: HANKINSON COMPRESSOR ROTATION SPEED: 480 RPM ELECTRIC MOTOR: 355 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 2000 x 900 x 900 mm<br/>description: lot composed of 8 (q.ty 8) tires for agricultural use<br> super rib tractor tubeless design<br> frame 8 pr<br> see photos WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 900 X 900 MM
DESCRIPTION: LOT COMPOSED OF 8 (Q.TY 8) TIRES FOR AGRICULTURAL USE
SUPER RIB TRACTOR TUBELESS DESIGN
FRAME 8 PR
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-injection molding machine for pet preforms, husky g 600 pet, year 2000
 
this is a complete preform production line from granule feeding to readymade pet bottle preform conveyor. the equipment was made by husky injection molding systems s. a. (spain) on year 2000 and started to manufacture in 2001. the human-machine interface is an ibm-compatible pc. the nominal capacity of 19000 preform with weight 44 gram for 1.5-liter pet bottles. neck format is light bpf . equipment is on good condition and ready for delivery.
 
the delivery includes:
- injection molding machine g 600 pet p120/130 e 140 husky
- dispenser of the dye mdt3/c piovan
- air conditioner piovan
- water circulation pump gp 1art 1x37 piovan
- vacuum pump f316 / 2 piovan
- granulate desiccant ds 531 piovan
- cooler rpn 1500 piovan
- in / out conveyors
- control instrumentation and control box
 
manufacturer: husky injection molding systems s. a.
manufacturers type: g 600 pet p/120/130 e140
manufacturer year: 2000
capacity: 19000 preforms/hour
number of molds: 96
current preform size: 44 grams for 1.5-liter pet
clamping force: 600 tons
clamping cycle time: 15 seconds
current neck format: light bpf  INJECTION MOLDING MACHINE FOR PET PREFORMS, HUSKY G 600 PET, YEAR 2000 THIS IS A COMPLETE PREFORM PRODUCTION LINE FROM GRANULE FEEDING TO READYMADE PET BOTTLE PREFORM CONVEYOR. THE EQUIPMENT WAS MADE BY HUSKY INJECTION MOLDING SYSTEMS S. A. (SPAIN) ON YEAR 2000 AND STARTED TO MANUFACTURE IN 2001. THE HUMAN-MACHINE INTERFACE IS AN IBM-COMPATIBLE PC. THE NOMINAL CAPACITY OF 19000 PREFORM WITH WEIGHT 44 GRAM FOR 1.5-LITER PET BOTTLES. NECK FORMAT IS LIGHT BPF . EQUIPMENT IS ON GOOD CONDITION AND READY FOR DELIVERY. THE DELIVERY INCLUDES: - INJECTION MOLDING MACHINE G 600 PET P120/130 E 140 HUSKY - DISPENSER OF THE DYE MDT3/C PIOVAN - AIR CONDITIONER PIOVAN - WATER CIRCULATION PUMP GP 1ART 1X37 PIOVAN - VACUUM PUMP F316 / 2 PIOVAN - GRANULATE DESICCANT DS 531 PIOVAN - COOLER RPN 1500 PIOVAN - IN / OUT CONVEYORS - CONTROL INSTRUMENTATION AND CONTROL BOX MANUFACTURER: HUSKY INJECTION MOLDING SYSTEMS S. A. MANUFACTURERS TYPE: G 600 PET P/120/130 E140 MANUFACTURER YEAR: 2000 CAPACITY: 19000 PREFORMS/HOUR NUMBER OF MOLDS: 96 CURRENT PREFORM SIZE: 44 GRAMS FOR 1.5-LITER PET CLAMPING FORCE: 600 TONS CLAMPING CYCLE TIME: 15 SECONDS CURRENT NECK FORMAT: LIGHT BPF
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 305 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1800 x 950 x 750 mm<br/>description: color dyed natural wood WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 950 X 750 MM
DESCRIPTION: COLOR DYED NATURAL WOOD
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pet compressor atelier francois ce68a 35 m3/h

this three stage intercooled high pressure compressor was build in year 2005 and it is till installed but operation was stopped in year 2014. this compressor is very slow speed and it has only two cross-head assemblies, two connecting rods and associated bearings. there is no piston rod packing on 3rd stage, which eliminate sealing against 40 bar. single acting 2nd and 3rd stage, requiring few valves. smaller 2nd and 3rd stages are horizontal position to optimize the piston ring life. the delivery includes stainless steel 40 bar air dyer with integrated 1 micron filter, dew point alarm and bekomat drain system and vertical hot galvanized 40 bar air receiver and control cabinet with af pc control system.

technical data:
manufacturer atelier francois belgium
manufacturing year 2005
fad (free air delivery) 35 m3/min at 40 bar
compressor rotation speed 480 rpm
electric motor 355 kw  PET COMPRESSOR ATELIER FRANCOIS CE68A 35 M3/H THIS THREE STAGE INTERCOOLED HIGH PRESSURE COMPRESSOR WAS BUILD IN YEAR 2005 AND IT IS TILL INSTALLED BUT OPERATION WAS STOPPED IN YEAR 2014. THIS COMPRESSOR IS VERY SLOW SPEED AND IT HAS ONLY TWO CROSS-HEAD ASSEMBLIES, TWO CONNECTING RODS AND ASSOCIATED BEARINGS. THERE IS NO PISTON ROD PACKING ON 3RD STAGE, WHICH ELIMINATE SEALING AGAINST 40 BAR. SINGLE ACTING 2ND AND 3RD STAGE, REQUIRING FEW VALVES. SMALLER 2ND AND 3RD STAGES ARE HORIZONTAL POSITION TO OPTIMIZE THE PISTON RING LIFE. THE DELIVERY INCLUDES STAINLESS STEEL 40 BAR AIR DYER WITH INTEGRATED 1 MICRON FILTER, DEW POINT ALARM AND BEKOMAT DRAIN SYSTEM AND VERTICAL HOT GALVANIZED 40 BAR AIR RECEIVER AND CONTROL CABINET WITH AF PC CONTROL SYSTEM. TECHNICAL DATA: MANUFACTURER ATELIER FRANCOIS BELGIUM MANUFACTURING YEAR 2005 FAD (FREE AIR DELIVERY) 35 M3/MIN AT 40 BAR COMPRESSOR ROTATION SPEED 480 RPM ELECTRIC MOTOR 355 KW
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 305 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 1800 x 950 x 750 mm<br/>description: color dyed natural wood WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 1800 X 950 X 750 MM
DESCRIPTION: COLOR DYED NATURAL WOOD
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
polyester fabric dyeing and printing equipment



3. tenter

make:myungsin(korea)

year:2003

width:2000mm

8-chamber

4. tenter

make:ilsung(korea)

year:1999

width:2,000mm

8-chamber

5. semi decutter

make:chungjin(korea)

year:2001

roll width:2,500mm

working width:1500mm

8. setting machine

make:bumhan(korea)

year:2003

bhl-2002 '

1-nozzle type

?1,000

control box

9. textile m/c

make:bianco

year:2002

roller width:2,400×1,200mm

11. continuous heater

make:daeyang(korea)

year:2001

16. rotary textile printing machine

make:daeyang(korea)

year:2004
12color

2)dryer


17. washing m/c

make:sinwoo(korea)

year:2004
3500l×2400w×2400hmm
18. boiler

make:sinpoong(korea)

year:2003
19. auto screen printing machine

make:daehyun(korea)

year:2007

13colors

13 colors

printing unit: 13units


20. auto screen printing machine

make:daehyun(korea)

year:2007

13colors

model: dhp-2900t

interlock type

w60 POLYESTER FABRIC DYEING AND PRINTING EQUIPMENT 3. TENTER MAKE:MYUNGSIN(KOREA) YEAR:2003 WIDTH:2000MM 8-CHAMBER 4. TENTER MAKE:ILSUNG(KOREA) YEAR:1999 WIDTH:2,000MM 8-CHAMBER 5. SEMI DECUTTER MAKE:CHUNGJIN(KOREA) YEAR:2001 ROLL WIDTH:2,500MM WORKING WIDTH:1500MM 8. SETTING MACHINE MAKE:BUMHAN(KOREA) YEAR:2003 BHL-2002 ' 1-NOZZLE TYPE ?1,000 CONTROL BOX 9. TEXTILE M/C MAKE:BIANCO YEAR:2002 ROLLER WIDTH:2,400×1,200MM 11. CONTINUOUS HEATER MAKE:DAEYANG(KOREA) YEAR:2001 16. ROTARY TEXTILE PRINTING MACHINE MAKE:DAEYANG(KOREA) YEAR:2004 12COLOR 2)DRYER 17. WASHING M/C MAKE:SINWOO(KOREA) YEAR:2004 3500L×2400W×2400HMM 18. BOILER MAKE:SINPOONG(KOREA) YEAR:2003 19. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREA) YEAR:2007 13COLORS 13 COLORS PRINTING UNIT: 13UNITS 20. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREA) YEAR:2007 13COLORS MODEL: DHP-2900T INTERLOCK TYPE W60" * R24" * 13COLORS 13 COLORS PRINTING UNIT: 13UNITS ( 22, AUTOMATIC SCREEN ENGRAVING M/C MAKE:ICHINOSE(JAPAN) YEAR:2000 23. DIGITAL NON FILM AUTOMATIC ENGRAVER MAKE:DS(KOREAN) YEAR:2008 25. DIGITAL NON FILM AUTOMATIC ENGRAVER MAKE:DS(KOREAN) YEAR:2008 26-1 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-2 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-3 SHEARING MACHINE MAKE:HYUNIL(KOREAN) YEAR:2008 26-4 EXPOSURE MAKE:HYUNIL(KOREAN) YEAR:2008 27.AUTOMATIC PACKING MACHINE MAKE:HYOSUNG(KOREAN) YEAR:2008 28. SAMPLE PRINTING MACHINE MAKE:HANWOONG(KOREAN) YEAR:2008 60"(1500MM) 29. SAMPLE PRINTING MACHINE MAKE:HANWOONG(KOREAN) YEAR:2008 60"(1500MM) 30. FOIL STAMPING MACHINE: MAKE:HAN(KOREAN) YEAR:2008 MAIN FRAME: 750*2250*3000MM HEATING ROLL: ?315*3000MM SILICON ROLL: ?300*3000MM HEATER: 2.5KW*6EA 31. TEST ROLLING MACHINE X4SETS MAKE:ROLL TECH(KOREAN) YEAR:2008 70" 32. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN) YEAR:2008 80" 33. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN YEAR:2008 100" 34 TEST ROLLING MACHINE X2 MAKE:ROLL TECH(KOREAN) YEAR:2008 80" 35. TEST ROLLING MACHINE MAKE:ROLL TECH(KOREAN) YEAR:2008 100" 36. CONTINUOUS TEST HEATER MAKE:CSM TECH(KOREAN) YEAR:2008 37.SAMPLE DIE MAKE:HANWOONG(KOREAN) YEAR:2008 38 SAMPLE DIE X2 MAKE:HANWOONG(KOREAN) YEAR:2008 60" * 18ML 39. WINDING MACHINE X3 MAKE:HANWOONG(KOREAN) YEAR:2008 MODEL: SD-2FLY 40. AUTO SCREEN PRINTING MACHINE MAKE:DAEHYUN(KOREAN) YEAR:2008 10 COLORS TABLE: 13 TABLE 41 BOILER X 1UNIT MAKE:HANKOOK(KOREAN) YEAR:2008 42. TENTER MAKE:IHWA(KOREAN) YEAR:2008 NAME: PLATINUM(ZIF-ZAG TYPE) WIDTH: 2200MM 44 CONTINUOUS CLEANER MAKE:SEOMKWANG(KOREAN) YEAR:2010 HEATING SOURCE 45. ELECTRIC HEATER MAKE:U&I(KOREAN) YEAR:2010 46. HIGH PRESSURE DYEING MACHINE MAKE:YU(KOREAN) YEAR:2011 CAP': 500KG 47. DYEING MACHINE MAKE:BH(KOREAN) YEAR:2009 VERTICAL TYPE CAP': 600KG 49. ELECTRIC TYPE FABRIC HEAT TREATMENT MAKE:U&I(KOREA) YEAR:2011 50. ELECTRIC TYPE FABRIC HEAT TREATMENT MAKE:U&I(KOREA) YEAR:2011 VERTICAL TYPE) MODEL: BH-P-200 CAP': 200KG 51. DYEING MACHINE X2 MAKE:YU(KOREA) YEAR:2011 CAP': 400KG CONTROLLER 52. WATER PRINTER& FABRIC INPUT EQUIPMENT X2 MAKE:MUTOH(JAPAN) YEAR:2011 BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-new surplus top brand tires for loaders 
tires are available until inventory is gone. ship worldwide.
(4) new 2012 firestone 70/70-57 84 ply srg dt ld
(3) new 2011/2012 michelin 60/80r57 xmin d2
(4) new firestone 58/85-57 84ply srg dt ld
(2) goodyear 52/80-57 hrl d/l -4g l4
(4) new 2018 goodyear 1150/65r45 rl5k
(4) new 2018 michelin 45/65r45 xldd2
(8) new 2017 bridgestone 45/65-45 d-lug l5 58ply
(4) new 2017 bridgestone 50/65-51 d-lug l5 62ply
new bridgestone 35/65r33 vsdl d2a 2* tu l5
new bridgestone 35/65r33 vsnt duh tll l4
 NEW SURPLUS TOP BRAND TIRES FOR LOADERS TIRES ARE AVAILABLE UNTIL INVENTORY IS GONE. SHIP WORLDWIDE. (4) NEW 2012 FIRESTONE 70/70-57 84 PLY SRG DT LD (3) NEW 2011/2012 MICHELIN 60/80R57 XMIN D2 (4) NEW FIRESTONE 58/85-57 84PLY SRG DT LD (2) GOODYEAR 52/80-57 HRL D/L -4G L4 (4) NEW 2018 GOODYEAR 1150/65R45 RL5K (4) NEW 2018 MICHELIN 45/65R45 XLDD2 (8) NEW 2017 BRIDGESTONE 45/65-45 D-LUG L5 58PLY (4) NEW 2017 BRIDGESTONE 50/65-51 D-LUG L5 62PLY NEW BRIDGESTONE 35/65R33 VSDL D2A 2* TU L5 NEW BRIDGESTONE 35/65R33 VSNT DUH TLL L4
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Ubicación: Land-manufacturer: 5 achs leimspritzanlage, type: superfici, year: 2000, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 3500, min.-max. workpiece height in mm: 10-100, working widht max mm: 1300, einlauband: 3500, enststaubung: 2 bürsten mit ioniesierung, spraying heads - total: 1, zuluftfilterdecke: yes, abdunstrockner mm : 7500, düesentrockner 1 mm temperatur: ca. 45, 5 axis machine: yes, stainless steel design: yes, spraying stations: 1, working widht mm: 1500, feeding speed m/min: 3-5, lichte durchlaufhöhe mm: 100, dry exhauster: yes, transport system paper: yes, lackierpistolen: 2, materialförderpumpen: krautzberger, spraying heads - total: 1, work piece cleaning: yes, work piece detection: yes, conveyour system: band, year :2000 MANUFACTURER: 5 ACHS LEIMSPRITZANLAGE, TYPE: SUPERFICI, YEAR: 2000, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 3500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, WORKING WIDHT MAX MM: 1300, EINLAUBAND: 3500, ENSTSTAUBUNG: 2 BüRSTEN MIT IONIESIERUNG, SPRAYING HEADS - TOTAL: 1, ZULUFTFILTERDECKE: YES, ABDUNSTROCKNER MM : 7500, DüESENTROCKNER 1 MM TEMPERATUR: CA. 45, 5 AXIS MACHINE: YES, STAINLESS STEEL DESIGN: YES, SPRAYING STATIONS: 1, WORKING WIDHT MM: 1500, FEEDING SPEED M/MIN: 3-5, LICHTE DURCHLAUFHöHE MM: 100, DRY EXHAUSTER: YES, TRANSPORT SYSTEM PAPER: YES, LACKIERPISTOLEN: 2, MATERIALFöRDERPUMPEN: KRAUTZBERGER, SPRAYING HEADS - TOTAL: 1, WORK PIECE CLEANING: YES, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-new surplus top brand tires loaders. 
tires are available until inventory is gone. ship worldwide

(4) new 2012 firestone 70/70-57 84 ply srg dt ld
(3) new 2011/2012 michelin 60/80r57 xmin d2
(4) new firestone 58/85-57 84ply srg dt ld
(2) goodyear 52/80-57 hrl d/l -4g l4
(4) new 2018 goodyear 1150/65r45 rl5k
(4) new 2018 michelin 45/65r45 xldd2
(8) new 2017 bridgestone 45/65-45 d-lug l5 58ply
(4) new 2017 bridgestone 50/65-51 d-lug l5 62ply
new bridgestone 35/65r33 vsdl d2a 2* tu l5
new bridgestone 35/65r33 vsnt duh tll l4
 NEW SURPLUS TOP BRAND TIRES LOADERS. TIRES ARE AVAILABLE UNTIL INVENTORY IS GONE. SHIP WORLDWIDE (4) NEW 2012 FIRESTONE 70/70-57 84 PLY SRG DT LD (3) NEW 2011/2012 MICHELIN 60/80R57 XMIN D2 (4) NEW FIRESTONE 58/85-57 84PLY SRG DT LD (2) GOODYEAR 52/80-57 HRL D/L -4G L4 (4) NEW 2018 GOODYEAR 1150/65R45 RL5K (4) NEW 2018 MICHELIN 45/65R45 XLDD2 (8) NEW 2017 BRIDGESTONE 45/65-45 D-LUG L5 58PLY (4) NEW 2017 BRIDGESTONE 50/65-51 D-LUG L5 62PLY NEW BRIDGESTONE 35/65R33 VSDL D2A 2* TU L5 NEW BRIDGESTONE 35/65R33 VSNT DUH TLL L4
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 19.800 €
Ubicación: Land-truck incl. trailer , , manufacturer: man , typ: 41.464 vfak 8x8 , fuel: diesel. , year: 1999 , chassis number: wmae680572l021054 , km: 307.183 , engine: man 6 cylinder turbo. , engine power: 338 kw (460 pk) , , * gearbox zf 16 s 221 od servo-shift , * airco , * heater (parking heater) , * 8x8x4 drive. , * sleeping cabin , * tyres truck: goodyear *385/65-22.5* (60 a 70%) , * full steel suspention , * intarder , , , trailer , , 3 blade suspended axles. , 40t loading capacity , loading floor: 13.10 m , loading floor height: 1.25 m , total lenght with truck 23.00 m , tyres trailer: dunlop 8.00r20 (40%) , ror axles; mileage [km]: 307183; power [ps]: 459; registration number: wmae680572l021054; transmission: zf 16 s 221 od servo-shift; front tyre size: 385/65-22.5; rear tyre size: 385/65-22.5; rear tyres remaining: 70; front tyres remaining: 70; registration year: 26; suspension type: blatt/blatt; axle configuration: 8x4*4; cabin: schlafkabine TRUCK INCL. TRAILER , , MANUFACTURER: MAN , TYP: 41.464 VFAK 8X8 , FUEL: DIESEL. , YEAR: 1999 , CHASSIS NUMBER: WMAE680572L021054 , KM: 307.183 , ENGINE: MAN 6 CYLINDER TURBO. , ENGINE POWER: 338 KW (460 PK) , , * GEARBOX ZF 16 S 221 OD SERVO-SHIFT , * AIRCO , * HEATER (PARKING HEATER) , * 8X8X4 DRIVE. , * SLEEPING CABIN , * TYRES TRUCK: GOODYEAR *385/65-22.5* (60 A 70%) , * FULL STEEL SUSPENTION , * INTARDER , , , TRAILER , , 3 BLADE SUSPENDED AXLES. , 40T LOADING CAPACITY , LOADING FLOOR: 13.10 M , LOADING FLOOR HEIGHT: 1.25 M , TOTAL LENGHT WITH TRUCK 23.00 M , TYRES TRAILER: DUNLOP 8.00R20 (40%) , ROR AXLES; MILEAGE [KM]: 307183; POWER [PS]: 459; REGISTRATION NUMBER: WMAE680572L021054; TRANSMISSION: ZF 16 S 221 OD SERVO-SHIFT; FRONT TYRE SIZE: 385/65-22.5; REAR TYRE SIZE: 385/65-22.5; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; REGISTRATION YEAR: 26; SUSPENSION TYPE: BLATT/BLATT; AXLE CONFIGURATION: 8X4*4; CABIN: SCHLAFKABINE
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-tires otr rock truck new surplus
new surplus top brand otr tires for off road truck 
tires are available until inventory is gone. ship worldwide.

(24) new 2012 bridgestone 59/80r63 vrf e1a e3
(12) new 2015 goodyear 53/80r63 rm4a+ 5s
(18) new 2017 michelin 50/80r57 xdr 250 b4
(4) new 2018 michelin 50/80r57 xdr 250 b4
(24) new 2018 goodyear 46/90r57 rm4a+ 4s
(24) new 2017 goodyear 40.00r57 rm4a+ 4s
(18) new 2018 goodyear 40.00r57 rl4b 2s
(12) new 2018 michelin 40.00r57 xdr3 mb4
(12) new 2018 michelin 40.00r57 xdr3 mb4
(10) new 2018 goodyear 3700r57 rm4a+ 4s
(12) new 2017 bridgestone 3700r57 vzts e2a
(12) new 2011 bridgestone 3700r57 vzts e2a
(12) new 2011 michelin 3700r57 xdr b4
(22) new 2005/2006 goodyear 3600-51 hrl 58ply
(12) new 2017 goodyear 3300r51 rm4a+ 4s
(21) new 2010 goodyear 3300r51 rl4j 4s
(48) new 2012-2013 bridgestone 3300r51vrls e1a
(10) new 2018 goodyear 2700r49 rm4a+ 3s
(24) new 2018 bridgestone 2700r49 vmtp e2a
(24) new 2017 bridgestone 2700r49 vrep e2a
(24) new 2013 titan 2700r49 007mft 223b
 TIRES OTR ROCK TRUCK NEW SURPLUS NEW SURPLUS TOP BRAND OTR TIRES FOR OFF ROAD TRUCK TIRES ARE AVAILABLE UNTIL INVENTORY IS GONE. SHIP WORLDWIDE. (24) NEW 2012 BRIDGESTONE 59/80R63 VRF E1A E3 (12) NEW 2015 GOODYEAR 53/80R63 RM4A+ 5S (18) NEW 2017 MICHELIN 50/80R57 XDR 250 B4 (4) NEW 2018 MICHELIN 50/80R57 XDR 250 B4 (24) NEW 2018 GOODYEAR 46/90R57 RM4A+ 4S (24) NEW 2017 GOODYEAR 40.00R57 RM4A+ 4S (18) NEW 2018 GOODYEAR 40.00R57 RL4B 2S (12) NEW 2018 MICHELIN 40.00R57 XDR3 MB4 (12) NEW 2018 MICHELIN 40.00R57 XDR3 MB4 (10) NEW 2018 GOODYEAR 3700R57 RM4A+ 4S (12) NEW 2017 BRIDGESTONE 3700R57 VZTS E2A (12) NEW 2011 BRIDGESTONE 3700R57 VZTS E2A (12) NEW 2011 MICHELIN 3700R57 XDR B4 (22) NEW 2005/2006 GOODYEAR 3600-51 HRL 58PLY (12) NEW 2017 GOODYEAR 3300R51 RM4A+ 4S (21) NEW 2010 GOODYEAR 3300R51 RL4J 4S (48) NEW 2012-2013 BRIDGESTONE 3300R51VRLS E1A (10) NEW 2018 GOODYEAR 2700R49 RM4A+ 3S (24) NEW 2018 BRIDGESTONE 2700R49 VMTP E2A (24) NEW 2017 BRIDGESTONE 2700R49 VREP E2A (24) NEW 2013 TITAN 2700R49 007MFT 223B
Vendedor: Brown Energy Group Inc
Año de construcción: usado
Precio: 175 €
Ubicación: Land-package of different brands used tyres:, - michelin, - goodyear, - bridgestone, - rock-grip, , all size r25 and some r33 PACKAGE OF DIFFERENT BRANDS USED TYRES:, - MICHELIN, - GOODYEAR, - BRIDGESTONE, - ROCK-GRIP, , ALL SIZE R25 AND SOME R33
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-used tires from dumpers and heavy loaders
well-known manufacturers such as goodyear, dunlop, michelin, continental
different sizes e.g. 18.00 r25, 14.00-24, 21.00 r35, 33.25-35
conditions and tread depth see photos
available with or without rims USED TIRES FROM DUMPERS AND HEAVY LOADERS WELL-KNOWN MANUFACTURERS SUCH AS GOODYEAR, DUNLOP, MICHELIN, CONTINENTAL DIFFERENT SIZES E.G. 18.00 R25, 14.00-24, 21.00 R35, 33.25-35 CONDITIONS AND TREAD DEPTH SEE PHOTOS AVAILABLE WITH OR WITHOUT RIMS
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Precio: 175 €
Ubicación: Land-package of different brands used tyres:, - michelin, - goodyear, - bridgestone, , all size r25 and some r33 PACKAGE OF DIFFERENT BRANDS USED TYRES:, - MICHELIN, - GOODYEAR, - BRIDGESTONE, , ALL SIZE R25 AND SOME R33
Vendedor: DPX Power BV
Año de construcción: usado
Ubicación: Land-
major textile knitting  plant liquidation 
(please your intrest with confirmed target price immedaitely)

 
 
knitting
12
monarch fil 8aeq, 30 MAJOR TEXTILE KNITTING PLANT LIQUIDATION (PLEASE YOUR INTREST WITH CONFIRMED TARGET PRICE IMMEDAITELY) KNITTING 12 MONARCH FIL 8AEQ, 30", 4-18 CUT, 8-24 CUT, 84 FEED 2 MONARCH FIL 8AEQ, 30", 18 CUT, 84 FEED, 50 % LYCRA 10 MONARCH FIM 108A, 30", 24 CUT, 108 FEED 1 MONARCH FDR RIB, 26", 14 CUT, 52 FEED 3 MONARCH RIB, 26", 14 CUT, 52 FEED, LYCRA 1 MONARCH RIB, 20", 14 CUT, 40 FEED 1 MONARCH SEC ELECTRONIC STRIPER, 30", 16 CUT, 36 FEED 6 MONARCH FXC4S, 30', 20 CUT, 122 FEED 4 MONARCH RACE, 30", 28 CUT, 122 CUT 1 MONARCH STEP JACK, 30", 20 CUT, 72 FEED 14 MONARCH RXDF, 30", 122 FEED, 3-24 CUT, 6-22 CUT, 5-18 CUT, 24 MONARCH RX4S, 26", 104 FD, 2-28 CUT, 4-24 CUT, 9-18 CUT, 9-22 CUT, 7 MONARCH FXC 4S, 26", 20 CUT, 104 FD. 6 MONARCH RX4S, 26", 20 CUT, 104 FD. 8 MONARCH RX WSY STRIPER, 30", 48 FEED, 5-16 CUT, 1-18 CUT, 1-28 CUT FLAT KNITTING 2 PROTTI PV94 DOUBLELOCK, 240 CM, 12 GAUGE 6 PROTTI PT222, 213 CM, 12 CUT 9 PROTTI PT242 JACQUARD, 218 CM, 12 CUT 35 STOLL JBOMB, 150 CM, 160 CM & 180 CM, 12 GAUGE DYEING 1 GASTON JET DYE, 80 LB., 1996, M6000 CONTROLLER 4 SCLAVOS JET DYE, VENUS HT3, 3 PORT, 1000 LBS., 50 PSI, 1999, UPDATED RECORE CONTROLS, 2014-15 3 GASTON FUTURA, 2 PORT, 1000 LBS., 53 PSI, BARCO CONTROLS, 1987 1 GASTON FUTURA JET DYE, SINGLE TUBE, 160 LBS,, 1992, M3000 CONTROLLER 4 RECORE DYE MACHINE CONTROLLERS, 2012-14 6 THEN AIRFLOW, 1200 LBS., 3 STRAND/3 PORTS, 1988 1 THEN AIRFLOW, 400 LBS., 1 PORT, 1987 3 ARGANTHAN JET DYE, 80 LBS. EACH, 60 PSI, 1982-80 1 ARGANTHAN JET DYE, 400 LBS., 60 PSI, 1982 11 ARGANTHAN JET DYE, 4 PORTS, 1000 LBS., 60 PSI, 1980 7 GASTON 824 JET DYE, 5-3 PORT, 2-2 PORT 200 STAINLESS MIXING TANKS WITH MIXERS, 50 TO 250 GAL. 200 DYEHOUSE TRUCKS, 72" X 42" WIDE X 35" DP. FINISHING 1 SANTEX SANTASTRECH PLUS 120, 48" WIDE, 120 CM, BALLOON EXTRACTOR, 5 TO 60 YPM, 1994 1 SANTEX SANTASHRINK DRYER, 220 CM WIDE, WITH PIN TENTER ENTRY, 1994, 6K/220 GAS IR SRS + SPR+FOUL+CUT, GAS FIRED, 6 CHAMBERS, 2400 LBS./HOUR EVAPORATION CAPACITY, 6.1 MIL BTU/HR 1 TUBETEX DRYER #6 GAS FIRED DRUM, ENTRY WITH 3- FABCON PADDERS 1 BIANCO SLITTER, 86" WIDE, BIANCO SLITTER HEAD (UPDATED 2015), ROPE SQUEEZE, DETWISTER, FOLDER, STAINLESS STEEL 1 BIANCO SLITTER, 86" WIDE, OPENER AND DETWISTER, 2 SCROLLED ROLLS, FLAT FOLDER 1 STENTEX TENTER STENTOTHERM 3300, 1995, 2400 MM MAX. WORKING WIDTH, UNWIND, J BOX, DOGAL UNCURLER, 2 SANTEX PADDERS, 102" WIDE, BIANCO WEFT STRAIGHTNER, E & L GUIDERS, LOW PROFILE GAS FIRED 12 ZONES, 1 KRANTZ SYNCRO SHRINK CONVEYOR DRYER, 100" WIDE BELT 2 FAMATEX TENTER #1 & #2 3 TUBE TEX DRUM DRYERS, 48" WIDE & 72" WIDE 1 FABCON DRUM DRYER, 8 ZONE 5 TUBULAR INSPECTION MACHINES 6 6 FABCON TUBULAR GULLWING TUBULAR COMPACTORS, 52" WIDE FABCON & TUBETEX TUBULAR CALENDARS, 50" & 60" WIDE 1 ARGATHEN BLEACH RANGE, 10 SECTION, 2200 LBS. HOUR. 1 JEMCO BLEACH RANGE, MODEL III 2000 CBR, 2,000 LBS. HOUR, 1995 1 CURTIS & MARBLE, PLASTIC ROLL WRAPPING 1 BESPOKE DYE MIXING SYSTEM, YEAR 2000, 16 PUMPS, 2 MODEL SRD EXACT WEIGH LIQUID CHEMICAL COLLECTING, MIXING, BATCH WEIGHING, 2 IR DUAL HEAD CENTRIFUGAL PUMP, METTLER INTERGRATED SCALE 1 TUBE TEX, DRUM DRYER 1999, WITH 3 TUBE TEX TUBULAR PADDERS 1 1 MONFORTS KNITGOODS TOPTEX 92" WIDE, OPEN WIDTH RUBBER BELT COMPACTOR, KOMBI BATCHER, STEAM HEATED MAIN CYLINDER, 1990 FABCON OPEN PIN TENTER, 90" WIDE X 20' LONG, STEAMING SECTION, BATCHER 1 LABORATORY: RAITECH QUICKWASH, DATACOLOR 500, MILNOR WASHER, HUEBSCH DRYER 50 LB., PLUS MANY MORE ITEMS 25 MERROW SEWING MACHINES, WITH TABLE AND MOTOR 2 GARDNER DENVER AIR COMPRESSOR, 60 HP 1 GARDNER DENVER AIR COMPRESSOR, 200 HP 3 INGERSOLL-RAND SCREW COMPRESSOR, 2- 250 HP, 1-150 HP 3 PROPANE STORAGE TANKS, 30,000 GALLON, WITH MIXER 4 STAINLESS STEEL OUTSIDE TANKS, 6000 GAL TO 10,000 GAL. 3 WASTE BALERS, VERTICAL STYLE 2 CLEAVER BROOKS PACKAGE BOILERS, 800 HP, 1988 + 1989, DEARATOR SYSTEM PLEASE CONTACT US FOR FURTHER INFORMATION .
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-working widths: 4600 mm<br/>roller width: 4800 mm<br/>number of rollers: 2 x s-walze stück<br/>swimming roll - dia: 350 mm<br/>roller covering - soft rubber: 75 grad shore<br/>pressure line: 50 n / mm<br/>pressure total: 24 to<br/>liquor trough with guide roll:  <br/>capacity of dye tub: ca.130 liter<br/>cloth guiding system for woven goods: geb. breithalter vor fuge <br/>hydraulic unit for separately pressure:  <br/>drive shaft: ohne antrieb <br/>? dyeing padder with two swimming rolls, horizontally arranged, <br/>? with liquor trough with guide roll and displacer,<br/>? machine will be completely overhauled before delivery. we supply with guarantee.<br/>(photo shows a similar machine after overhauling)<br/>? new drive can be designed according to case of operation, extra charges: eur 10000 - 12000<br/>? guarantee period: 6 months,<br/><br/><br/><br/><br/> WORKING WIDTHS: 4600 MM
ROLLER WIDTH: 4800 MM
NUMBER OF ROLLERS: 2 X S-WALZE STüCK
SWIMMING ROLL - DIA: 350 MM
ROLLER COVERING - SOFT RUBBER: 75 GRAD SHORE
PRESSURE LINE: 50 N / MM
PRESSURE TOTAL: 24 TO
LIQUOR TROUGH WITH GUIDE ROLL:
CAPACITY OF DYE TUB: CA.130 LITER
CLOTH GUIDING SYSTEM FOR WOVEN GOODS: GEB. BREITHALTER VOR FUGE
HYDRAULIC UNIT FOR SEPARATELY PRESSURE:
DRIVE SHAFT: OHNE ANTRIEB
? DYEING PADDER WITH TWO SWIMMING ROLLS, HORIZONTALLY ARRANGED,
? WITH LIQUOR TROUGH WITH GUIDE ROLL AND DISPLACER,
? MACHINE WILL BE COMPLETELY OVERHAULED BEFORE DELIVERY. WE SUPPLY WITH GUARANTEE.
(PHOTO SHOWS A SIMILAR MACHINE AFTER OVERHAULING)
? NEW DRIVE CAN BE DESIGNED ACCORDING TO CASE OF OPERATION, EXTRA CHARGES: EUR 10000 - 12000
? GUARANTEE PERIOD: 6 MONTHS,




Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-kusters thermosol dyeing range, roller width 2000 mm, year 1985

kusters dyeing padder model 222.11.1800

gogasdortmund infrered gas heated predryer, installed in 2005

artos hot flue

exit by a-frame batcher

machine with inverters KUSTERS THERMOSOL DYEING RANGE, ROLLER WIDTH 2000 MM, YEAR 1985 KUSTERS DYEING PADDER MODEL 222.11.1800 GOGASDORTMUND INFRERED GAS HEATED PREDRYER, INSTALLED IN 2005 ARTOS HOT FLUE EXIT BY A-FRAME BATCHER MACHINE WITH INVERTERS
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-working widths: 1600 mm<br/>roller width: 1800 mm<br/>number of rollers: 2 x s-walze stück<br/>swimming roll - dia: 190 mm<br/>roller covering - soft rubber: 75 grad shore<br/>pressure line: 50 n / mm<br/>pressure total: 9 to<br/>liquor trough with displacer: + leitwalze <br/>capacity of dye tub: ca. 22 liter<br/>cloth guiding system for woven fabrics: geb. breithalter <br/>hydraulic unit for separately pressure:  <br/>drive shaft:  <br/>? dye-padder with two swimming roll (s-rolls) and a small basin for cpb-dyeing,<br/>? machine will be completely overhauled before delivery, we supply with warranty<br/>  (photo shows an overhauled machine in delivery-status),<br/>? without drive, it  must be adapted when mounting in a plant or as single machine<br/><br/><br/><br/> WORKING WIDTHS: 1600 MM
ROLLER WIDTH: 1800 MM
NUMBER OF ROLLERS: 2 X S-WALZE STüCK
SWIMMING ROLL - DIA: 190 MM
ROLLER COVERING - SOFT RUBBER: 75 GRAD SHORE
PRESSURE LINE: 50 N / MM
PRESSURE TOTAL: 9 TO
LIQUOR TROUGH WITH DISPLACER: + LEITWALZE
CAPACITY OF DYE TUB: CA. 22 LITER
CLOTH GUIDING SYSTEM FOR WOVEN FABRICS: GEB. BREITHALTER
HYDRAULIC UNIT FOR SEPARATELY PRESSURE:
DRIVE SHAFT:
? DYE-PADDER WITH TWO SWIMMING ROLL (S-ROLLS) AND A SMALL BASIN FOR CPB-DYEING,
? MACHINE WILL BE COMPLETELY OVERHAULED BEFORE DELIVERY, WE SUPPLY WITH WARRANTY
(PHOTO SHOWS AN OVERHAULED MACHINE IN DELIVERY-STATUS),
? WITHOUT DRIVE, IT MUST BE ADAPTED WHEN MOUNTING IN A PLANT OR AS SINGLE MACHINE



Vendedor: FEYEN Maschinen GmbH
Año de construcción: usado
Ubicación: Land-tupesa washing machine model ecodye 25. year 2003 

diameter: 1500 mm depth: 600 mm TUPESA WASHING MACHINE MODEL ECODYE 25. YEAR 2003 DIAMETER: 1500 MM DEPTH: 600 MM
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-tupesa tumbler drying machine model ecodye/80 TUPESA TUMBLER DRYING MACHINE MODEL ECODYE/80
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-brazzoli jet dyeing machine model innoflow ex ht6 xc2, year 2007
 
capacity 1200 kg in 6 ropes
temperature 140ºc
hot water recovery tank
automatic nozzle diameter regulator 90 to 120 mm
2 add tanks
in running condition BRAZZOLI JET DYEING MACHINE MODEL INNOFLOW EX HT6 XC2, YEAR 2007 CAPACITY 1200 KG IN 6 ROPES TEMPERATURE 140ºC HOT WATER RECOVERY TANK AUTOMATIC NOZZLE DIAMETER REGULATOR 90 TO 120 MM 2 ADD TANKS IN RUNNING CONDITION
Vendedor: Inautex
Año de construcción: usado
Ubicación: Land-arioli steamer for fabric, model vp+f02 , year 2001
roller width 2.200 mm
cloth content 350 m
temperature:
t – 105°c (steam) ± 5°c
tmax – 200°c (ht with thermos oil)
2 cooling drums
heating system inside the chamber:
- there are steam nozzels inside the chamber. additionally there are thermo oil radiators for high temperature applications.

arioli impregnation padder, year 2001
e+l spreader and guider
roller width 2.200 mm
with one steel cylinder for indanthren dyeing and reactive (workwear).
3 add tanks on a gantry

read more about  indanthren on this link: 
abc://abc.textileworld.com/textile-world/textile-news/2001/02/century-of-success/ ARIOLI STEAMER FOR FABRIC, MODEL VP+F02 , YEAR 2001 ROLLER WIDTH 2.200 MM CLOTH CONTENT 350 M TEMPERATURE: T – 105°C (STEAM) ± 5°C TMAX – 200°C (HT WITH THERMOS OIL) 2 COOLING DRUMS HEATING SYSTEM INSIDE THE CHAMBER: - THERE ARE STEAM NOZZELS INSIDE THE CHAMBER. ADDITIONALLY THERE ARE THERMO OIL RADIATORS FOR HIGH TEMPERATURE APPLICATIONS. ARIOLI IMPREGNATION PADDER, YEAR 2001 E+L SPREADER AND GUIDER ROLLER WIDTH 2.200 MM WITH ONE STEEL CYLINDER FOR INDANTHREN DYEING AND REACTIVE (WORKWEAR). 3 ADD TANKS ON A GANTRY READ MORE ABOUT INDANTHREN ON THIS LINK: ABC://ABC.TEXTILEWORLD.COM/TEXTILE-WORLD/TEXTILE-NEWS/2001/02/CENTURY-OF-SUCCESS/
Vendedor: Inautex
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more DYE types: