104 ofertas

Año de construcción: usado
Ubicación: Land-vibrating sieves to the screening of different granule fractions.

containers with conical or on wheels.

simple, low-cost maintenance.

easy to clean.

quick replacing of the filter network.

engine 2-4 pole.

power discharge tamping system on request.

designed for continuous operation. VIBRATING SIEVES TO THE SCREENING OF DIFFERENT GRANULE FRACTIONS. CONTAINERS WITH CONICAL OR ON WHEELS. SIMPLE, LOW-COST MAINTENANCE. EASY TO CLEAN. QUICK REPLACING OF THE FILTER NETWORK. ENGINE 2-4 POLE. POWER DISCHARGE TAMPING SYSTEM ON REQUEST. DESIGNED FOR CONTINUOUS OPERATION.
Vendedor: AGICOM-Pedergnana OG
Año de construcción: usado
Ubicación: Land-compact kantenannleimmaschinen for straight workpieces with enamel adhesive rollers on the edge of the workpiece.
pressure by inclined table role and standing at an angle to the workpiece direction feed bar (tape feed).

facilities:
-quick heating pool
-pneumatic edge indentation and rolling capping
-hf caps saw unit
-hf levelling moulder with combined exchange board cutter for radius/straight/bevel
-pull-out workpiece support

technical data:
work dimensions: length: min. 260 mm
width: 90 mm
thickness: 10-45 mm (radius 13-45 mm)
edging material:
cut from the roll up to 3 mm
gluing and cross-cut saws up to 5 mm
feed: approx. 11m / min
power consumption: 11,5 kw
compressed air connection: 8 bar
dimensions: 3115 x 860 x 1200 mm
weight: 560 kg
 COMPACT KANTENANNLEIMMASCHINEN FOR STRAIGHT WORKPIECES WITH ENAMEL ADHESIVE ROLLERS ON THE EDGE OF THE WORKPIECE. PRESSURE BY INCLINED TABLE ROLE AND STANDING AT AN ANGLE TO THE WORKPIECE DIRECTION FEED BAR (TAPE FEED). FACILITIES: -QUICK HEATING POOL -PNEUMATIC EDGE INDENTATION AND ROLLING CAPPING -HF CAPS SAW UNIT -HF LEVELLING MOULDER WITH COMBINED EXCHANGE BOARD CUTTER FOR RADIUS/STRAIGHT/BEVEL -PULL-OUT WORKPIECE SUPPORT TECHNICAL DATA: WORK DIMENSIONS: LENGTH: MIN. 260 MM WIDTH: 90 MM THICKNESS: 10-45 MM (RADIUS 13-45 MM) EDGING MATERIAL: CUT FROM THE ROLL UP TO 3 MM GLUING AND CROSS-CUT SAWS UP TO 5 MM FEED: APPROX. 11M / MIN POWER CONSUMPTION: 11,5 KW COMPRESSED AIR CONNECTION: 8 BAR DIMENSIONS: 3115 X 860 X 1200 MM WEIGHT: 560 KG
Vendedor: Maschinen-Kaul GmbH & Co.KG
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-screening machine, demonstration machine
make / brand s & f gmbh
type / type asm-200
screen area / screen area 2.0 mâ²
printing performance / sreening performance approx. 30 mâ³ / h (e.g. for wood chips, etc.)
power / input rating 2, 2kw

suitable for e.g. following printing goods / adapted for:

sawdust/wood chips
sawdust/wood dust
sawdust/sawdust
old wood/old wood shavings
etc. SCREENING MACHINE, DEMONSTRATION MACHINE MAKE / BRAND S & F GMBH TYPE / TYPE ASM-200 SCREEN AREA / SCREEN AREA 2.0 M² PRINTING PERFORMANCE / SREENING PERFORMANCE APPROX. 30 M³ / H (E.G. FOR WOOD CHIPS, ETC.) POWER / INPUT RATING 2, 2KW SUITABLE FOR E.G. FOLLOWING PRINTING GOODS / ADAPTED FOR: SAWDUST/WOOD CHIPS SAWDUST/WOOD DUST SAWDUST/SAWDUST OLD WOOD/OLD WOOD SHAVINGS ETC.
Vendedor: S&F GmbH - Siebmaschinen und Fördertechnik
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-professional edge bander ebm 200-slot machine oklejaj?cy in-with a polisher, oklejaniem top-down to simple elements. cutting ball truncating flange on evenly with cooking and with allowance. great opportunities at a very affordable price! truncating edges front/end on the outside of the machine with the help of the cutter blade, off-cycle. this model also has a.

-rounding of the edges to: full-3 mm, half-1 mm

-bevel edging with a thickness of 0.5 mm

-buffing

-to apply the simple items.

-edge banding with a thickness from 0.4 to 2 mm and a height of workpieces from 12 to 45 mm.

-with a very large table 2040 x 340 mm.

specification:

-the thickness of the edge (pvc) 0.4-2 mm

-thickness of min./max. 12-45 mm

-length/width of the workpiece min. 280/90 mm

-table dimensions 2040 x 340 mm

-temperature range 20-220 ° c. a 15-minute

-air pressure 6-8 bar

-feed speed 7 m/min

-extraction-connector 90 mm

-total power 2.0 kw

-dimensions of 2780 x 1000 x 1190 mm weight approx. 280 kg

-the machine technical overview

-ready to go

-ability to check on the place of purchase PROFESSIONAL EDGE BANDER EBM 200-SLOT MACHINE OKLEJAJ?CY IN-WITH A POLISHER, OKLEJANIEM TOP-DOWN TO SIMPLE ELEMENTS. CUTTING BALL TRUNCATING FLANGE ON EVENLY WITH COOKING AND WITH ALLOWANCE. GREAT OPPORTUNITIES AT A VERY AFFORDABLE PRICE! TRUNCATING EDGES FRONT/END ON THE OUTSIDE OF THE MACHINE WITH THE HELP OF THE CUTTER BLADE, OFF-CYCLE. THIS MODEL ALSO HAS A. -ROUNDING OF THE EDGES TO: FULL-3 MM, HALF-1 MM -BEVEL EDGING WITH A THICKNESS OF 0.5 MM -BUFFING -TO APPLY THE SIMPLE ITEMS. -EDGE BANDING WITH A THICKNESS FROM 0.4 TO 2 MM AND A HEIGHT OF WORKPIECES FROM 12 TO 45 MM. -WITH A VERY LARGE TABLE 2040 X 340 MM. SPECIFICATION: -THE THICKNESS OF THE EDGE (PVC) 0.4-2 MM -THICKNESS OF MIN./MAX. 12-45 MM -LENGTH/WIDTH OF THE WORKPIECE MIN. 280/90 MM -TABLE DIMENSIONS 2040 X 340 MM -TEMPERATURE RANGE 20-220 ° C. A 15-MINUTE -AIR PRESSURE 6-8 BAR -FEED SPEED 7 M/MIN -EXTRACTION-CONNECTOR 90 MM -TOTAL POWER 2.0 KW -DIMENSIONS OF 2780 X 1000 X 1190 MM WEIGHT APPROX. 280 KG -THE MACHINE TECHNICAL OVERVIEW -READY TO GO -ABILITY TO CHECK ON THE PLACE OF PURCHASE
Vendedor: StanDrew
Año de construcción: usado
Precio: 750 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
edgebander prostliniowa ebm 200 with polishing

professional edge bander ebm 200-slot machine oklejaj?cy in-with a polisher, oklejaniem top-down to simple elements. cutting ball truncating flange on evenly with cooking and with allowance. great opportunities at a very affordable price! truncating edges front/end on the outside of the machine with the help of the cutter blade, off-cycle. this model also has a.

-rounding of the edges to: full-3 mm, half-1 mm

-bevel edging with a thickness of 0.5 mm

-buffing

-to apply the simple items.

-edge banding with a thickness from 0.4 to 2 mm and a height of workpieces from 12 to 45 mm.

-with a very large table 2040 x 340 mm.

specification:

-the thickness of the edge (pvc) 0.4-2 mm

-thickness of min./max. 12-45 mm

-length/width of the workpiece min. 280/90 mm

-table dimensions 2040 x 340 mm

-temperature range 20-220 ° c. a 15-minute

-air pressure 6-8 bar

-feed speed 7 m/min

-extraction-connector 90 mm

-total power 2.0 kw

-dimensions of 2780 x 1000 x 1190 mm weight approx. 280 kg

-the machine technical overview

-ready to go

-ability to check on the place of purchase EDGEBANDER PROSTLINIOWA EBM 200 WITH POLISHING PROFESSIONAL EDGE BANDER EBM 200-SLOT MACHINE OKLEJAJ?CY IN-WITH A POLISHER, OKLEJANIEM TOP-DOWN TO SIMPLE ELEMENTS. CUTTING BALL TRUNCATING FLANGE ON EVENLY WITH COOKING AND WITH ALLOWANCE. GREAT OPPORTUNITIES AT A VERY AFFORDABLE PRICE! TRUNCATING EDGES FRONT/END ON THE OUTSIDE OF THE MACHINE WITH THE HELP OF THE CUTTER BLADE, OFF-CYCLE. THIS MODEL ALSO HAS A. -ROUNDING OF THE EDGES TO: FULL-3 MM, HALF-1 MM -BEVEL EDGING WITH A THICKNESS OF 0.5 MM -BUFFING -TO APPLY THE SIMPLE ITEMS. -EDGE BANDING WITH A THICKNESS FROM 0.4 TO 2 MM AND A HEIGHT OF WORKPIECES FROM 12 TO 45 MM. -WITH A VERY LARGE TABLE 2040 X 340 MM. SPECIFICATION: -THE THICKNESS OF THE EDGE (PVC) 0.4-2 MM -THICKNESS OF MIN./MAX. 12-45 MM -LENGTH/WIDTH OF THE WORKPIECE MIN. 280/90 MM -TABLE DIMENSIONS 2040 X 340 MM -TEMPERATURE RANGE 20-220 ° C. A 15-MINUTE -AIR PRESSURE 6-8 BAR -FEED SPEED 7 M/MIN -EXTRACTION-CONNECTOR 90 MM -TOTAL POWER 2.0 KW -DIMENSIONS OF 2780 X 1000 X 1190 MM WEIGHT APPROX. 280 KG -THE MACHINE TECHNICAL OVERVIEW -READY TO GO -ABILITY TO CHECK ON THE PLACE OF PURCHASE
Vendedor: StanDrew
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
edgebander cormak ebm-380

, cuts and stick crown

-machine in stock
-after reviewing the technical
-ready to go
-year of manufacture 2015

technical parameters:

-thickness of edging 0.3-3 mm
-the width of the flange 10-65 mm
-shaft height 15-8 cm
-the minimum radius of 20 °
-3 speed
-heat output 1.65 kw
-pressure 6 bar

-pneumatic shears for cutting flanges (tape stuck on)
-robust, rugged design
-input sensor and the truncation of the tape
-automatic download and cut strips from the tray
-easy-to-use and convenient embedded control panel

dimensions:
-length: 1100 mm
-width: 830 mm
-height: 1150 mm

-weight 195 kg

two variants of adhesive!
1. directly on the plate
2. directly to a disc EDGEBANDER CORMAK EBM-380 , CUTS AND STICK CROWN -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -READY TO GO -YEAR OF MANUFACTURE 2015 TECHNICAL PARAMETERS: -THICKNESS OF EDGING 0.3-3 MM -THE WIDTH OF THE FLANGE 10-65 MM -SHAFT HEIGHT 15-8 CM -THE MINIMUM RADIUS OF 20 ° -3 SPEED -HEAT OUTPUT 1.65 KW -PRESSURE 6 BAR -PNEUMATIC SHEARS FOR CUTTING FLANGES (TAPE STUCK ON) -ROBUST, RUGGED DESIGN -INPUT SENSOR AND THE TRUNCATION OF THE TAPE -AUTOMATIC DOWNLOAD AND CUT STRIPS FROM THE TRAY -EASY-TO-USE AND CONVENIENT EMBEDDED CONTROL PANEL DIMENSIONS: -LENGTH: 1100 MM -WIDTH: 830 MM -HEIGHT: 1150 MM -WEIGHT 195 KG TWO VARIANTS OF ADHESIVE! 1. DIRECTLY ON THE PLATE 2. DIRECTLY TO A DISC
Vendedor: StanDrew
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-screening machine make / brand s & f gmbh
type / type asm-150
screen area / screen area 1, 5 mâ²
printing performance / sreening performance around 20 mâ³ / h (e.g. for wood chips, etc.)
power / input rating 1, 5kw

suitable for e.g. following printing goods / adapted for:

sawdust/wood chips
    sawdust/wood dust
    sawdust/sawdust
    old wood/old wood shavings
    etc. SCREENING MACHINE MAKE / BRAND S & F GMBH TYPE / TYPE ASM-150 SCREEN AREA / SCREEN AREA 1, 5 M² PRINTING PERFORMANCE / SREENING PERFORMANCE AROUND 20 M³ / H (E.G. FOR WOOD CHIPS, ETC.) POWER / INPUT RATING 1, 5KW SUITABLE FOR E.G. FOLLOWING PRINTING GOODS / ADAPTED FOR: SAWDUST/WOOD CHIPS SAWDUST/WOOD DUST SAWDUST/SAWDUST OLD WOOD/OLD WOOD SHAVINGS ETC.
Vendedor: S&F GmbH - Siebmaschinen und Fördertechnik
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-2 batching motion, brand kohl, never used, ww 3200 mm, to work behind the loom and work on big batches, with light and inspection table 2 BATCHING MOTION, BRAND KOHL, NEVER USED, WW 3200 MM, TO WORK BEHIND THE LOOM AND WORK ON BIG BATCHES, WITH LIGHT AND INSPECTION TABLE
Vendedor: Classen - TM
Año de construcción: usado
Precio: 290 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc railway control 3 axles, siemens 810
42 x tool changer
procedures; x = 1800, y = 560, z = quill stroke: 300 mm.
spindle speed: 30-4000 rpm.
tool holder: sk 40.
router table surface: 2 piece 900 x 550 mm.
incl. coolant system with internal coolant, electr. remote control,
full cabin and full documentation.
shuttle machining possible.
weight: approx. 9000 kg.
good working condition.
the machine can be seen under power and is immediately available.  CNC RAILWAY CONTROL 3 AXLES, SIEMENS 810 42 X TOOL CHANGER PROCEDURES; X = 1800, Y = 560, Z = QUILL STROKE: 300 MM. SPINDLE SPEED: 30-4000 RPM. TOOL HOLDER: SK 40. ROUTER TABLE SURFACE: 2 PIECE 900 X 550 MM. INCL. COOLANT SYSTEM WITH INTERNAL COOLANT, ELECTR. REMOTE CONTROL, FULL CABIN AND FULL DOCUMENTATION. SHUTTLE MACHINING POSSIBLE. WEIGHT: APPROX. 9000 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: 105.000 €
Ubicación: Land-600 mm shoes, mono, hammer, shear and tilt hydraulics, air condition, quick coupler, 1 bucket, undercarriage 60%; accessories: 600 mm platten, mono, hammer-, scheren- und tilthydraulik, air condition, schnellwechslung, 1 tieflöffel, laufwerk 60% // 600 mm shoes, mono, hammer, shear and tilt hydraulics, air condition, quick coupler, 1 bucket, undercarriage 60%, hammer/scherenhydra 600 MM SHOES, MONO, HAMMER, SHEAR AND TILT HYDRAULICS, AIR CONDITION, QUICK COUPLER, 1 BUCKET, UNDERCARRIAGE 60%; ACCESSORIES: 600 MM PLATTEN, MONO, HAMMER-, SCHEREN- UND TILTHYDRAULIK, AIR CONDITION, SCHNELLWECHSLUNG, 1 TIEFLöFFEL, LAUFWERK 60% // 600 MM SHOES, MONO, HAMMER, SHEAR AND TILT HYDRAULICS, AIR CONDITION, QUICK COUPLER, 1 BUCKET, UNDERCARRIAGE 60%, HAMMER/SCHERENHYDRA
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Precio: 6.950 €
Ubicación: Land-heidenhain cnc railway control system tnc 355
traverse paths: x = 800, 500 = y, z = 450 mm.
spindle retainer: sk 40 with hydr. tool clamping
spindle speed: 20-3000 rpm.
horizontal milling spindle, chip conveyor,
angle table approx. 1000 x 500 mm,
universal swivel head with boring quill,
coolant system, cabin, and documentation.
weight: approx. 4000 kg.
good working condition.
the machine can be seen in consultation and is available immediately. HEIDENHAIN CNC RAILWAY CONTROL SYSTEM TNC 355 TRAVERSE PATHS: X = 800, 500 = Y, Z = 450 MM. SPINDLE RETAINER: SK 40 WITH HYDR. TOOL CLAMPING SPINDLE SPEED: 20-3000 RPM. HORIZONTAL MILLING SPINDLE, CHIP CONVEYOR, ANGLE TABLE APPROX. 1000 X 500 MM, UNIVERSAL SWIVEL HEAD WITH BORING QUILL, COOLANT SYSTEM, CABIN, AND DOCUMENTATION. WEIGHT: APPROX. 4000 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN IN CONSULTATION AND IS AVAILABLE IMMEDIATELY.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-working length: max 3200 mm.
incl. electrical backgauge with counter
hydraulic system in the machine
and two hand operation.
weight: approx. 2400 kg.
very good working condition.
the machine was only cut paper and paperboard.
the machine can be seen under power and is immediately available. WORKING LENGTH: MAX 3200 MM. INCL. ELECTRICAL BACKGAUGE WITH COUNTER HYDRAULIC SYSTEM IN THE MACHINE AND TWO HAND OPERATION. WEIGHT: APPROX. 2400 KG. VERY GOOD WORKING CONDITION. THE MACHINE WAS ONLY CUT PAPER AND PAPERBOARD. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-tip height: 280 mm.
top width: 1000 mm.
spindle speeds: 11.2-2240 rev/min.
spindle bore: 60 mm.
incl. 2 axis heidenhain digital display,.
3 jaw chuck 250 mm with various jaws,.
quick change toolpost, multifix size c,.
cooling plant, chip pan, tailstock mk 5
and documentation. power: 7.5 kw.
weight: approx. 3000 kg.
good working condition.
the machine can be seen under power and is immediately have asked. TIP HEIGHT: 280 MM. TOP WIDTH: 1000 MM. SPINDLE SPEEDS: 11.2-2240 REV/MIN. SPINDLE BORE: 60 MM. INCL. 2 AXIS HEIDENHAIN DIGITAL DISPLAY,. 3 JAW CHUCK 250 MM WITH VARIOUS JAWS,. QUICK CHANGE TOOLPOST, MULTIFIX SIZE C,. COOLING PLANT, CHIP PAN, TAILSTOCK MK 5 AND DOCUMENTATION. POWER: 7.5 KW. WEIGHT: APPROX. 3000 KG. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY HAVE ASKED.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-i'm going to sell a cereals sieve for the german production. I'M GOING TO SELL A CEREALS SIEVE FOR THE GERMAN PRODUCTION.
Vendedor: Herr Krzysztof Grajny
Año de construcción: usado
Ubicación: Land-grinding range: approx. 1550 x 550 x approx. 450 mm high.
grinding wheel dimensions: 400 x 100 mm.
solenoid plate: 1500 x 500 mm.                                         automatic delivery of grinding depth.
automatic cross feed (continuous).
grinding spindle speed: 1460 rpm.
coolant system and documentation.
weight: 7000 kg. free loaded truck.
machine dimensions, wxdxh: approximately 4600 x 2300 x 2500 mm.
good working condition.
the machine can be seen under power and is immediately available GRINDING RANGE: APPROX. 1550 X 550 X APPROX. 450 MM HIGH. GRINDING WHEEL DIMENSIONS: 400 X 100 MM. SOLENOID PLATE: 1500 X 500 MM. AUTOMATIC DELIVERY OF GRINDING DEPTH. AUTOMATIC CROSS FEED (CONTINUOUS). GRINDING SPINDLE SPEED: 1460 RPM. COOLANT SYSTEM AND DOCUMENTATION. WEIGHT: 7000 KG. FREE LOADED TRUCK. MACHINE DIMENSIONS, WXDXH: APPROXIMATELY 4600 X 2300 X 2500 MM. GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-screening machine SCREENING MACHINE
Vendedor: Firma Roscher
Año de construcción: usado
Ubicación: Land-single station machine for articles up to 4 ltr. extruder 60/24d. ac motor with frequency inverter. extrusion head bk 120 with accumulator 1 litre. needle blowing top and bottom. siemens s5 control unit. clamping force 64 kn SINGLE STATION MACHINE FOR ARTICLES UP TO 4 LTR. EXTRUDER 60/24D. AC MOTOR WITH FREQUENCY INVERTER. EXTRUSION HEAD BK 120 WITH ACCUMULATOR 1 LITRE. NEEDLE BLOWING TOP AND BOTTOM. SIEMENS S5 CONTROL UNIT. CLAMPING FORCE 64 KN
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-accuheadmachine for articles up to 30 ltr. clamping force of 250 kn. extruder 90/20 d. needle blowing. siemens s5 with mcc 200. take-out gripper. ACCUHEADMACHINE FOR ARTICLES UP TO 30 LTR. CLAMPING FORCE OF 250 KN. EXTRUDER 90/20 D. NEEDLE BLOWING. SIEMENS S5 WITH MCC 200. TAKE-OUT GRIPPER.
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-complete screen unit with roll crusher
manufacturer merz
roll crusher f wbg 3/10
screening machine uka ii 1000/2000
built in 1995
 on demand with complete supply and acceptance

documentation available COMPLETE SCREEN UNIT WITH ROLL CRUSHER MANUFACTURER MERZ ROLL CRUSHER F WBG 3/10 SCREENING MACHINE UKA II 1000/2000 BUILT IN 1995 ON DEMAND WITH COMPLETE SUPPLY AND ACCEPTANCE DOCUMENTATION AVAILABLE
Vendedor: Direkt-Handelskontor GmbH
Año de construcción: usado
Ubicación: Land-flow rate: 2,85 m3/min.
discharge pressure: 10 bar
power: 22 kw
main rotor speed: 6840 rpm.
including new air boiler, b. 2016
good einstzbereiter condition.
the plant can be seen under power and is available. FLOW RATE: 2,85 M3/MIN. DISCHARGE PRESSURE: 10 BAR POWER: 22 KW MAIN ROTOR SPEED: 6840 RPM. INCLUDING NEW AIR BOILER, B. 2016 GOOD EINSTZBEREITER CONDITION. THE PLANT CAN BE SEEN UNDER POWER AND IS AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-
cnc railway control heidenhain tnc 355
12 pocket tool changer
traverse paths: x = 900, 500 = y, z = 500 mm.
spindle retainer: sk 40 with hydr. tool clamping
spindle speed: 40-4000 rpm.
universal swivel head with drill spindle, hub: 90 mm.
: solid angle table clamping surface 500 x 1000 mm.
electr. handwheel, full cab, div. toolholders,
coolant system and complete documentation.
weight: approx. 3500 kg.
dimensions, b x d x h: ca. 2100 x 2500 x 1950 mm.
the machine can be seen under power and available at short notice. CNC RAILWAY CONTROL HEIDENHAIN TNC 355 12 POCKET TOOL CHANGER TRAVERSE PATHS: X = 900, 500 = Y, Z = 500 MM. SPINDLE RETAINER: SK 40 WITH HYDR. TOOL CLAMPING SPINDLE SPEED: 40-4000 RPM. UNIVERSAL SWIVEL HEAD WITH DRILL SPINDLE, HUB: 90 MM. : SOLID ANGLE TABLE CLAMPING SURFACE 500 X 1000 MM. ELECTR. HANDWHEEL, FULL CAB, DIV. TOOLHOLDERS, COOLANT SYSTEM AND COMPLETE DOCUMENTATION. WEIGHT: APPROX. 3500 KG. DIMENSIONS, B X D X H: CA. 2100 X 2500 X 1950 MM. THE MACHINE CAN BE SEEN UNDER POWER AND AVAILABLE AT SHORT NOTICE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-compact filter plant mccloskey new!

screening plant for the gala of construction, agriculture
mobile system area ca 2 m2
2 screen decks
 COMPACT FILTER PLANT MCCLOSKEY NEW! SCREENING PLANT FOR THE GALA OF CONSTRUCTION, AGRICULTURE MOBILE SYSTEM AREA CA 2 M2 2 SCREEN DECKS
Vendedor: Hiebl Minerals
Año de construcción: usado
Ubicación: Land-extruder 90/20d. grooved barrel. accuhead 4 litres. new plc-control. bottom blow stand. very good condition EXTRUDER 90/20D. GROOVED BARREL. ACCUHEAD 4 LITRES. NEW PLC-CONTROL. BOTTOM BLOW STAND. VERY GOOD CONDITION
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-extruder 100/22d. 6 - fold head 100 mm center to center make mueller. plc-control  siemens simatic pp 17. good condition. optional: bottles and waste conveyor, granulator, leak tester within the machine, material mixer / conveyor EXTRUDER 100/22D. 6 - FOLD HEAD 100 MM CENTER TO CENTER MAKE MUELLER. PLC-CONTROL SIEMENS SIMATIC PP 17. GOOD CONDITION. OPTIONAL: BOTTLES AND WASTE CONVEYOR, GRANULATOR, LEAK TESTER WITHIN THE MACHINE, MATERIAL MIXER / CONVEYOR
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-extruder 80/24 d. 4 - fold head 100 mm center to center. moog control. good condition. optional: material mixer / feeder, bottles - and waste conveyor, leak tester, granulator EXTRUDER 80/24 D. 4 - FOLD HEAD 100 MM CENTER TO CENTER. MOOG CONTROL. GOOD CONDITION. OPTIONAL: MATERIAL MIXER / FEEDER, BOTTLES - AND WASTE CONVEYOR, LEAK TESTER, GRANULATOR
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-extruder 38/20 d. relay control. hot cut. head on-demand. with accessories: material mixer/feeder, leak tester. good condition EXTRUDER 38/20 D. RELAY CONTROL. HOT CUT. HEAD ON-DEMAND. WITH ACCESSORIES: MATERIAL MIXER/FEEDER, LEAK TESTER. GOOD CONDITION
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-3-layer coex. doublehead 70 mm center to center. relay control. good condition. 3-LAYER COEX. DOUBLEHEAD 70 MM CENTER TO CENTER. RELAY CONTROL. GOOD CONDITION.
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-control pmc 1000. extruder 80/22d. head on request. good condition. optional: bottle and waste conveyor, granulator, leaktester, material mixer/feeder CONTROL PMC 1000. EXTRUDER 80/22D. HEAD ON REQUEST. GOOD CONDITION. OPTIONAL: BOTTLE AND WASTE CONVEYOR, GRANULATOR, LEAKTESTER, MATERIAL MIXER/FEEDER
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-various printing machines
steckel & schrader
screening machine on steel frame
see photos VARIOUS PRINTING MACHINES STECKEL & SCHRADER SCREENING MACHINE ON STEEL FRAME SEE PHOTOS
Vendedor: Maschinen und Mühlenbau Benker
Año de construcción: usado
Precio: 16.750 €
Ubicación: Land-finlay / terex 390 hydrascreen, screen / screening, deutz engine, including additional belts, german machine, 5.150 h, year 1996 FINLAY / TEREX 390 HYDRASCREEN, SCREEN / SCREENING, DEUTZ ENGINE, INCLUDING ADDITIONAL BELTS, GERMAN MACHINE, 5.150 H, YEAR 1996
Vendedor: 4LBiz Handelsgesellschaft UG
Año de construcción: usado
Precio: 8.200 €
Ubicación: Land-bellmer screen belt press 500 mm, p. 1.1kw, activity 4 to 5 m3/h
l. 5800, l. 1200, h. 1700mm, weight approx. 2.4t
powder flocculant plant.
whole unit in very good condition. BELLMER SCREEN BELT PRESS 500 MM, P. 1.1KW, ACTIVITY 4 TO 5 M3/H L. 5800, L. 1200, H. 1700MM, WEIGHT APPROX. 2.4T POWDER FLOCCULANT PLANT. WHOLE UNIT IN VERY GOOD CONDITION.
Vendedor: Tecnova service Sarl
Año de construcción: usado
Ubicación: Land-cnc control: bosch
6 x tool changer
punching pressure: 250kn.
working range: 2000 x 1000 mm (medium format).
sheet thickness: max 6.4 mm.
incl. drawer cabinet with punches and matrices, (full)
tool - magazine cars with various shots,
matrices and punch grinder, trumpf type: quicksharp,.
tool setting device trumps, type: quickset,.
photoelectric system for the workspace
and complete documentation.
weight: approx. 8000 kg.
very good working condition.
the machine can be seen under power and is immediately available. CNC CONTROL: BOSCH 6 X TOOL CHANGER PUNCHING PRESSURE: 250KN. WORKING RANGE: 2000 X 1000 MM (MEDIUM FORMAT). SHEET THICKNESS: MAX 6.4 MM. INCL. DRAWER CABINET WITH PUNCHES AND MATRICES, (FULL) TOOL - MAGAZINE CARS WITH VARIOUS SHOTS, MATRICES AND PUNCH GRINDER, TRUMPF TYPE: QUICKSHARP,. TOOL SETTING DEVICE TRUMPS, TYPE: QUICKSET,. PHOTOELECTRIC SYSTEM FOR THE WORKSPACE AND COMPLETE DOCUMENTATION. WEIGHT: APPROX. 8000 KG. VERY GOOD WORKING CONDITION. THE MACHINE CAN BE SEEN UNDER POWER AND IS IMMEDIATELY AVAILABLE.
Vendedor: EBM Maschinenhandel
Año de construcción: usado
Ubicación: Land-accuheadmachine for articles up to 220 ltr. 2 extruder s 70, output approx. 170... 180 kg in hdpe. clamping force 700 kn.accuhead 6 kgs. hydraulic bottom moving control. good condition. free approximately january 2019 ACCUHEADMACHINE FOR ARTICLES UP TO 220 LTR. 2 EXTRUDER S 70, OUTPUT APPROX. 170... 180 KG IN HDPE. CLAMPING FORCE 700 KN.ACCUHEAD 6 KGS. HYDRAULIC BOTTOM MOVING CONTROL. GOOD CONDITION. FREE APPROXIMATELY JANUARY 2019
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-zentrifugue nx 920 in good condition.
5-10m 3/h ZENTRIFUGUE NX 920 IN GOOD CONDITION. 5-10M 3/H
Vendedor: Tecnova service Sarl
Año de construcción: usado
Ubicación: Land-screen area: 1300 x 4000 mm, new semi mobile steel structure SCREEN AREA: 1300 X 4000 MM, NEW SEMI MOBILE STEEL STRUCTURE
Vendedor: ENDERS Produktion GmbH
Año de construcción: usado
Precio: 99.000 €
Ubicación: Land-courtyard mobile variant of the sm 518 proven, compact, moving axis. COURTYARD MOBILE VARIANT OF THE SM 518 PROVEN, COMPACT, MOVING AXIS.
Vendedor: Rottenkolber Umwelttechnik
Año de construcción: usado
Ubicación: Land-two-station machine for containers up to 2 ltr. doppelkopf deco type s 2/35-110 w. mã¼ller
deco 39/20. accessories punch / bottle unscrambler TWO-STATION MACHINE FOR CONTAINERS UP TO 2 LTR. DOPPELKOPF DECO TYPE S 2/35-110 W. MüLLER DECO 39/20. ACCESSORIES PUNCH / BOTTLE UNSCRAMBLER
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-ceramic tile production line(sacmi:italy)

 

1 ceramic tile production line

1)   hydraulic press: 680ton

sacmi (italy)

   year:2013

 

2)   roller: w800×l9,500?

sacmi (italy)

  year:2013

3)   line: w1,000×l10,000?

sacmi (italy)

   year:2013

4)   return line: w300×l3,000?

sacmi (italy)

year:2013

r,h,kiln: w1,900×l29,000?

sacmi (italy)

  year:2014

5)   tile cutting line

 sacmi (italy)

   year:2013

 

3 constant weight feeder

year:2013

cap': 6?

 

4 mixer

make:hankook(korea)

year:2014

 cap': 30hp

 

5 roll crusher

make:hankook(korea)

year:2013

cap': 600?

 

6 vacuum machine

make:hankook(korea)

year:2013

 cap': 30hp

 

10 net dryer

make:hankook(korea)

year:2014

w1,100×l27m

 

11 kiln auto loading machine

make:ebm

year:2006

- installed power: 8kw

- tiles size: 100×100, 150×150,   600×600

 tension volts: 3×380v

- frequnece: 60hz

 

12 kiln auto unloading machine

make:ebm

year:2006

 cap': max 2 frames/min

 tension volts: 3×380v

- frequnece: 60hz

- power: 405kw

 

13 compressor

 

14 l.p.g storage tank

make:hyunjin(korea)

year:2011

- volume: 6097 liter

- des. press: 1.77mpa

- h. test press: 2.4mpa

 - empty weight: 1900kg

 

2) l.p.g  vaporizer

make:jinu(korea)

year:2011

- cap': 150kg/hr

- design pressure: 1.77mpa

- pressure test: 2.4mpa

 - heating source: electric

 - elctric power: 380v 22.5kw

 

15 screen crusher

make:sanchung(korea)

year:2011

- motor: 2.2kw – rotation type

2) conveyor

- type: belt conveyor - dim: 500× 4,000?×1ea  

    500× 5,200?×1ea    

  500× 6,000?×1ea   

   500× 7,500?×1ea   

   500× 10,000?×2ea

 

17 agitator

motor: 1hp

tank: ?800×650?

18 product transfer car

 - dim: 600×1150×1120 

  
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    
   CERAMIC TILE PRODUCTION LINE(SACMI:ITALY) 1 CERAMIC TILE PRODUCTION LINE 1) HYDRAULIC PRESS: 680TON SACMI (ITALY) YEAR:2013 2) ROLLER: W800×L9,500? SACMI (ITALY) YEAR:2013 3) LINE: W1,000×L10,000? SACMI (ITALY) YEAR:2013 4) RETURN LINE: W300×L3,000? SACMI (ITALY) YEAR:2013 R,H,KILN: W1,900×L29,000? SACMI (ITALY) YEAR:2014 5) TILE CUTTING LINE SACMI (ITALY) YEAR:2013 3 CONSTANT WEIGHT FEEDER YEAR:2013 CAP': 6? 4 MIXER MAKE:HANKOOK(KOREA) YEAR:2014 CAP': 30HP 5 ROLL CRUSHER MAKE:HANKOOK(KOREA) YEAR:2013 CAP': 600? 6 VACUUM MACHINE MAKE:HANKOOK(KOREA) YEAR:2013 CAP': 30HP 10 NET DRYER MAKE:HANKOOK(KOREA) YEAR:2014 W1,100×L27M 11 KILN AUTO LOADING MACHINE MAKE:EBM YEAR:2006 - INSTALLED POWER: 8KW - TILES SIZE: 100×100, 150×150, 600×600 TENSION VOLTS: 3×380V - FREQUNECE: 60HZ 12 KILN AUTO UNLOADING MACHINE MAKE:EBM YEAR:2006 CAP': MAX 2 FRAMES/MIN TENSION VOLTS: 3×380V - FREQUNECE: 60HZ - POWER: 405KW 13 COMPRESSOR 14 L.P.G STORAGE TANK MAKE:HYUNJIN(KOREA) YEAR:2011 - VOLUME: 6097 LITER - DES. PRESS: 1.77MPA - H. TEST PRESS: 2.4MPA - EMPTY WEIGHT: 1900KG 2) L.P.G VAPORIZER MAKE:JINU(KOREA) YEAR:2011 - CAP': 150KG/HR - DESIGN PRESSURE: 1.77MPA - PRESSURE TEST: 2.4MPA - HEATING SOURCE: ELECTRIC - ELCTRIC POWER: 380V 22.5KW 15 SCREEN CRUSHER MAKE:SANCHUNG(KOREA) YEAR:2011 - MOTOR: 2.2KW – ROTATION TYPE 2) CONVEYOR - TYPE: BELT CONVEYOR - DIM: 500× 4,000?×1EA 500× 5,200?×1EA 500× 6,000?×1EA 500× 7,500?×1EA 500× 10,000?×2EA 17 AGITATOR MOTOR: 1HP TANK: ?800×650? 18 PRODUCT TRANSFER CAR - DIM: 600×1150×1120 BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-two-station machine for containers up to 3 litres with single head or 2 x 1.5 litres with double head. clamping force of 50 kn.
closing plate 400 mm in length, width 300 mm, 2 x 100 mm deep.
head as per need.  could be completely overhauled, also with new b & r control TWO-STATION MACHINE FOR CONTAINERS UP TO 3 LITRES WITH SINGLE HEAD OR 2 X 1.5 LITRES WITH DOUBLE HEAD. CLAMPING FORCE OF 50 KN. CLOSING PLATE 400 MM IN LENGTH, WIDTH 300 MM, 2 X 100 MM DEEP. HEAD AS PER NEED. COULD BE COMPLETELY OVERHAULED, ALSO WITH NEW B & R CONTROL
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-extruder s 60/20d, smooth barrel with fan cooling. relay control. simple head (another head possible) EXTRUDER S 60/20D, SMOOTH BARREL WITH FAN COOLING. RELAY CONTROL. SIMPLE HEAD (ANOTHER HEAD POSSIBLE)
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-large accuhead machine for at least 1.000 litres for ibc containers or large technical parts such as air lines for trucks. good condition. clamping force 180 tons. platen sizes: 1.700 mm width, length 2.300 mm. opening 1,000 to 2,700 mm
extruder 150/24d. with take-out robot to place the finished parts into a down-stream
finshing machine. LARGE ACCUHEAD MACHINE FOR AT LEAST 1.000 LITRES FOR IBC CONTAINERS OR LARGE TECHNICAL PARTS SUCH AS AIR LINES FOR TRUCKS. GOOD CONDITION. CLAMPING FORCE 180 TONS. PLATEN SIZES: 1.700 MM WIDTH, LENGTH 2.300 MM. OPENING 1,000 TO 2,700 MM EXTRUDER 150/24D. WITH TAKE-OUT ROBOT TO PLACE THE FINISHED PARTS INTO A DOWN-STREAM FINSHING MACHINE.
Vendedor: UES - Universal Extrusion Service
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more EBM types: