628 ofertas

Año de construcción: usado
Ubicación: Land-brushing machine (900 mm)
sma-ref-6257
category: other
manufacturer: quickwood
type: d2 / 900
year of construction: 1996
workspace:
working width: 900 mm
workpiece height: 100 mm
workpiece length: min. 350 mm
special features: 2 rolls
electron. adjustable
2 x 3 kw
deburring
lacquer sanding
polishing
structure
fladdern
condition: ready to use
under current
fladderwalzen installed
add 6 brush strips. incl.
location: austria
dimensions:
1,800 / 1,800 / 1700 mm
900 kg
availability: immediately BRUSHING MACHINE (900 MM) SMA-REF-6257 CATEGORY: OTHER MANUFACTURER: QUICKWOOD TYPE: D2 / 900 YEAR OF CONSTRUCTION: 1996 WORKSPACE: WORKING WIDTH: 900 MM WORKPIECE HEIGHT: 100 MM WORKPIECE LENGTH: MIN. 350 MM SPECIAL FEATURES: 2 ROLLS ELECTRON. ADJUSTABLE 2 X 3 KW DEBURRING LACQUER SANDING POLISHING STRUCTURE FLADDERN CONDITION: READY TO USE UNDER CURRENT FLADDERWALZEN INSTALLED ADD 6 BRUSH STRIPS. INCL. LOCATION: AUSTRIA DIMENSIONS: 1,800 / 1,800 / 1700 MM 900 KG AVAILABILITY: IMMEDIATELY
Vendedor: S-MA GmbH
Año de construcción: usado
Ubicación: Land-technical data conveyor belt<br/>manufacturer not known<br/>typ  kgf 800-1200<br/>year of construction 2018<br/>driving motor 5,5 kw, 400 v, 10,5 a, yoc 2017<br/>length feeding conveyor 4,970 mm<br/>length elevating conveyor 13,400 mm<br/>length goose neck 2,530 mm<br/>grade 30°<br/>height of drive axle above ground approx. 6,400 mm<br/>effecting width 1,170 mm<br/>height of side wall feeding conv. 530 mm<br/>height of side wall elevating conv. 800 mm<br/>transport dimensions feeding conveyor 7,000 x 1,700 x 1,800 mm (l x w x h)<br/>transport dimensions elevating conveyor 13,400 x 2,300 x 2,400 mm (l x w x h)<br/>weight approx. 9 tons<br/><br/>condition of the conveyor belt:<br/>the chain belt conveyor was completely overhauled in 2018 and rebuilt with new components. the frame and all attachments are sandblasted, primed and painted. the following components were renewed:<br/>the frame parts with the running surfaces for the chains, the chains, the sprockets, the traverses and the belt. the sew eurodrive engine with gearbox was built in 2017.<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA CONVEYOR BELT
MANUFACTURER NOT KNOWN
TYP KGF 800-1200
YEAR OF CONSTRUCTION 2018
DRIVING MOTOR 5,5 KW, 400 V, 10,5 A, YOC 2017
LENGTH FEEDING CONVEYOR 4,970 MM
LENGTH ELEVATING CONVEYOR 13,400 MM
LENGTH GOOSE NECK 2,530 MM
GRADE 30°
HEIGHT OF DRIVE AXLE ABOVE GROUND APPROX. 6,400 MM
EFFECTING WIDTH 1,170 MM
HEIGHT OF SIDE WALL FEEDING CONV. 530 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
TRANSPORT DIMENSIONS FEEDING CONVEYOR 7,000 X 1,700 X 1,800 MM (L X W X H)
TRANSPORT DIMENSIONS ELEVATING CONVEYOR 13,400 X 2,300 X 2,400 MM (L X W X H)
WEIGHT APPROX. 9 TONS

CONDITION OF THE CONVEYOR BELT:
THE CHAIN BELT CONVEYOR WAS COMPLETELY OVERHAULED IN 2018 AND REBUILT WITH NEW COMPONENTS. THE FRAME AND ALL ATTACHMENTS ARE SANDBLASTED, PRIMED AND PAINTED. THE FOLLOWING COMPONENTS WERE RENEWED:
THE FRAME PARTS WITH THE RUNNING SURFACES FOR THE CHAINS, THE CHAINS, THE SPROCKETS, THE TRAVERSES AND THE BELT. THE SEW EURODRIVE ENGINE WITH GEARBOX WAS BUILT IN 2017.

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-
maximum sheet thickness: 5 mm
rpm: 1500 / 3000 rpm
brush diameter: 250 mm
total power consumption: 2.4 / 3.0 kw / 400 v
machine weight: 300 kg

equipment / accessories:

machine fixators

the machine is suitable for the deburring of steel, stainless steel plate, as well as ne - metals.

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before purchasing power.
 MAXIMUM SHEET THICKNESS: 5 MM RPM: 1500 / 3000 RPM BRUSH DIAMETER: 250 MM TOTAL POWER CONSUMPTION: 2.4 / 3.0 KW / 400 V MACHINE WEIGHT: 300 KG EQUIPMENT / ACCESSORIES: MACHINE FIXATORS THE MACHINE IS SUITABLE FOR THE DEBURRING OF STEEL, STAINLESS STEEL PLATE, AS WELL AS NE - METALS. ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE PURCHASING POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 1.022 htt
Ubicación: Land-1 1
Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-film developing machine g + j ml 400; completely overhauled; infeed width 400 mm; daylight cassette; new circulation pumps; new regeneration pump; new temperature sensor; new heaters.

film processor g + j ml 400; rebuilt; working width 400mm; daylight cassette; new pumps; new temperature sensor; new heaters. FILM DEVELOPING MACHINE G + J ML 400; COMPLETELY OVERHAULED; INFEED WIDTH 400 MM; DAYLIGHT CASSETTE; NEW CIRCULATION PUMPS; NEW REGENERATION PUMP; NEW TEMPERATURE SENSOR; NEW HEATERS. FILM PROCESSOR G + J ML 400; REBUILT; WORKING WIDTH 400MM; DAYLIGHT CASSETTE; NEW PUMPS; NEW TEMPERATURE SENSOR; NEW HEATERS.
Vendedor: Joachim Ethner Handelsvertretungen
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1680 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2800 mm<br/>description: uv drying tunnel barberan hok 14/3<br> serial number 3632-01-82<br> rebuilt in 2016<br> number of lamps: 4 units<br> length of lamps 1680 mm<br> power of lamps 45 kw<br> without electrical cabinet<br> WEIGHT APPROX.: 1680 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2800 MM
DESCRIPTION: UV DRYING TUNNEL BARBERAN HOK 14/3
SERIAL NUMBER 3632-01-82
REBUILT IN 2016
NUMBER OF LAMPS: 4 UNITS
LENGTH OF LAMPS 1680 MM
POWER OF LAMPS 45 KW
WITHOUT ELECTRICAL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-type of machine:.
surface finishing machine / deburring machine,.
deburring barrel / barrel finishing machine,.
manufacturer: roto finish.
model: pg100.
year of construction: 1970.
condition: good,.
type of offer: used machine,
     ,.	
technical data:.
barrel: Ø 370 x 420 mm,.
comment:. 
continuous speed control.
el. height adjustment of the barrel.
very good rubber coating.
drive type: 0.75 / 400 v,.
weight: 250 kg,
     ,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE:. SURFACE FINISHING MACHINE / DEBURRING MACHINE,. DEBURRING BARREL / BARREL FINISHING MACHINE,. MANUFACTURER: ROTO FINISH. MODEL: PG100. YEAR OF CONSTRUCTION: 1970. CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. BARREL: Ø 370 X 420 MM,. COMMENT:. CONTINUOUS SPEED CONTROL. EL. HEIGHT ADJUSTMENT OF THE BARREL. VERY GOOD RUBBER COATING. DRIVE TYPE: 0.75 / 400 V,. WEIGHT: 250 KG, ,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 2600 x 2100 x 1500 mm<br/>description: uv drying tunnel barberan hok 14/3<br> serial number 7141-02-91<br> rebuilt in 2016<br> number of lamps: 4 units<br> length of lamps 1600 mm<br> power of lamps 45 kw<br> motor power 4,4 kw<br> without electrical cabinet<br> WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 2100 X 1500 MM
DESCRIPTION: UV DRYING TUNNEL BARBERAN HOK 14/3
SERIAL NUMBER 7141-02-91
REBUILT IN 2016
NUMBER OF LAMPS: 4 UNITS
LENGTH OF LAMPS 1600 MM
POWER OF LAMPS 45 KW
MOTOR POWER 4,4 KW
WITHOUT ELECTRICAL CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: 100 mm<br/>max. module: 1 <br/>min. module: 10 <br/>control: siemens sps control (s 7) <br/>total power requirement: 3 kw<br/>weight of the machine ca.: 1.800 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: 100 MM
MAX. MODULE: 1
MIN. MODULE: 10
CONTROL: SIEMENS SPS CONTROL (S 7)
TOTAL POWER REQUIREMENT: 3 KW
WEIGHT OF THE MACHINE CA.: 1.800 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 24.900 €
Ubicación: Land-handtmann plh216 with ahe225

completely rebuilt in 2019, sercos machine, suitable for all handtmann vf600

6 months warranty  HANDTMANN PLH216 WITH AHE225 COMPLETELY REBUILT IN 2019, SERCOS MACHINE, SUITABLE FOR ALL HANDTMANN VF600 6 MONTHS WARRANTY
Vendedor: PWS Fleischereimaschinen GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 250,350,450 mm<br/>grinding length: 1500 mm<br/>centre height: 125,175,225 mm<br/>grinding wheel diameter: 400 mm<br/>grinding wheel width: 50 mm<br/>bore: 127 mm<br/>: mk5 <br/>work piece spindle speed: 20-400 u/min<br/>workpiece spindle - bore:  mm<br/>grinding head swivelling: 360 °<br/>grinding spindle head - swivable: 180 + - °<br/>grinding spindle speed: 1500,1700,2200 u/min<br/>: 0,001-0,030 mm/Ø<br/>: 0-0,95 mm/Ø<br/>: ± 6 °<br/>longitudinal feed of the table: 1750 mm<br/>table speeds: 0,02-6 m/min<br/>: 130 kg<br/>: 130 inkl. spannugkg kg<br/>:  mm<br/>grinding depth:  mm<br/>: 80 mm<br/>total power requirement: 6,5 kw<br/>weight of the machine ca.: 2,9 t<br/>dimensions of the machine ca.: 5,6 x 2,0 m<br/>overhauled with geometric kellenberger protocoll.<br/><br/>standard with:<br/><br/>-new electric cabinet<br/>-new motor for the workpiecespindlehead<br/>-2-axis dro<br/>-paper filtration<br/><br/><br/>fotos of a delivered (1000u) machine with following optiones against extra <br/>charge:<br/><br/>-protection doors<br/>-tailstock version advance. in this case with micro-adjusting<br/>-handwheel of the version advance<br/><br/>more options on request:<br/><br/>-dro for swivel angle of workpiecespindlehead<br/>-dro for swivel angle of grinding wheel head<br/>-internal spindle holder with bore up to 100mm<br/>-max center height of 225mm<br/><br/>more kellenberger machines:<br/><br/>www.bumtg.com<br/><br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> GRINDING DIAMETER: 250,350,450 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 125,175,225 MM
GRINDING WHEEL DIAMETER: 400 MM
GRINDING WHEEL WIDTH: 50 MM
BORE: 127 MM
: MK5
WORK PIECE SPINDLE SPEED: 20-400 U/MIN
WORKPIECE SPINDLE - BORE: MM
GRINDING HEAD SWIVELLING: 360 °
GRINDING SPINDLE HEAD - SWIVABLE: 180 + - °
GRINDING SPINDLE SPEED: 1500,1700,2200 U/MIN
: 0,001-0,030 MM/Ø
: 0-0,95 MM/Ø
: ± 6 °
LONGITUDINAL FEED OF THE TABLE: 1750 MM
TABLE SPEEDS: 0,02-6 M/MIN
: 130 KG
: 130 INKL. SPANNUGKG KG
: MM
GRINDING DEPTH: MM
: 80 MM
TOTAL POWER REQUIREMENT: 6,5 KW
WEIGHT OF THE MACHINE CA.: 2,9 T
DIMENSIONS OF THE MACHINE CA.: 5,6 X 2,0 M
OVERHAULED WITH GEOMETRIC KELLENBERGER PROTOCOLL.

STANDARD WITH:

-NEW ELECTRIC CABINET
-NEW MOTOR FOR THE WORKPIECESPINDLEHEAD
-2-AXIS DRO
-PAPER FILTRATION


FOTOS OF A DELIVERED (1000U) MACHINE WITH FOLLOWING OPTIONES AGAINST EXTRA
CHARGE:

-PROTECTION DOORS
-TAILSTOCK VERSION ADVANCE. IN THIS CASE WITH MICRO-ADJUSTING
-HANDWHEEL OF THE VERSION ADVANCE

MORE OPTIONS ON REQUEST:

-DRO FOR SWIVEL ANGLE OF WORKPIECESPINDLEHEAD
-DRO FOR SWIVEL ANGLE OF GRINDING WHEEL HEAD
-INTERNAL SPINDLE HOLDER WITH BORE UP TO 100MM
-MAX CENTER HEIGHT OF 225MM

MORE KELLENBERGER MACHINES:

WWW.BUMTG.COM


DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-there are three deburring machines available, 1x krÄmer 79 und 2x krÄmer 80.  THERE ARE THREE DEBURRING MACHINES AVAILABLE, 1X KRÄMER 79 UND 2X KRÄMER 80.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-diameter:  mm<br/>workpiece length:  mm<br/>work piece width:  mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> DIAMETER: MM
WORKPIECE LENGTH: MM
WORK PIECE WIDTH: MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-there are three identical deburring machines available, connected load: 120va, year of construction machine 1 and 2/ 3: 1992/ 2002.  THERE ARE THREE IDENTICAL DEBURRING MACHINES AVAILABLE, CONNECTED LOAD: 120VA, YEAR OF CONSTRUCTION MACHINE 1 AND 2/ 3: 1992/ 2002.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-: 200 to<br/>: 530 x 420 mm<br/>: 200 mm<br/>: 350 mm<br/>: 18,5 kw<br/>: 1.550 mm<br/>: 1.255 mm<br/>: 2.665 mm<br/>: 5.200 kg<br/>hydraulic ejactor <br/>securitydrive sick 14 fgs <br/>user manual in german, not completed<br/><br/>cylinder rebuilt 2016 (honed, piston rod sanded, new seals)<br/><br/>complies with the current industrial safety regulations (amvo &, uvv)<br/><br/>press force: 200 to<br/>work dimension: 530 x 420 mm<br/>stroke: 200 mm<br/>distance ram-table: 350 mm<br/>working speed: 20 mm/sec.<br/>rapid speed: 390 mm/sec.<br/>motor: 18,5 kw<br/>length: 1.550 mm<br/>width: 1.255 mm<br/>heigth: 2.665 mm<br/>machine nr.: 3064<br/>weight: 5.200 kg<br/><br/><br/><br/> : 200 TO
: 530 X 420 MM
: 200 MM
: 350 MM
: 18,5 KW
: 1.550 MM
: 1.255 MM
: 2.665 MM
: 5.200 KG
HYDRAULIC EJACTOR
SECURITYDRIVE SICK 14 FGS
USER MANUAL IN GERMAN, NOT COMPLETED

CYLINDER REBUILT 2016 (HONED, PISTON ROD SANDED, NEW SEALS)

COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)

PRESS FORCE: 200 TO
WORK DIMENSION: 530 X 420 MM
STROKE: 200 MM
DISTANCE RAM-TABLE: 350 MM
WORKING SPEED: 20 MM/SEC.
RAPID SPEED: 390 MM/SEC.
MOTOR: 18,5 KW
LENGTH: 1.550 MM
WIDTH: 1.255 MM
HEIGTH: 2.665 MM
MACHINE NR.: 3064
WEIGHT: 5.200 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-claas mercator 75, bj. 1978, 6 cyl. perkins engine, cabin of fahr in 1102, chopper, cutter 3 m, ber.: 18.4-30 and 11.5/80-15.3, 4 shaker CLAAS MERCATOR 75, BJ. 1978, 6 CYL. PERKINS ENGINE, CABIN OF FAHR IN 1102, CHOPPER, CUTTER 3 M, BER.: 18.4-30 AND 11.5/80-15.3, 4 SHAKER
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Ubicación: Land-workpiece diameter: 320 mm<br/>workpiece weight: 9999999 kg<br/>workpiece height: 9999999 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>very good conditioned machine.<br/><br/>die werkzeugmaschine entspricht zum derzeitigen zeitpunkt nicht den grundlegenden sicherheits- und schutzanforderungen wie in der betrsichv 2015 genannt.<br/>eine anhebung des erforderlichen mindest-schutzzieles ist mittels einer gefährdungsbeurteilung nach betrsichv zu ermitteln.<br/><br/><br/><br/> WORKPIECE DIAMETER: 320 MM
WORKPIECE WEIGHT: 9999999 KG
WORKPIECE HEIGHT: 9999999 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
VERY GOOD CONDITIONED MACHINE.

DIE WERKZEUGMASCHINE ENTSPRICHT ZUM DERZEITIGEN ZEITPUNKT NICHT DEN GRUNDLEGENDEN SICHERHEITS- UND SCHUTZANFORDERUNGEN WIE IN DER BETRSICHV 2015 GENANNT.
EINE ANHEBUNG DES ERFORDERLICHEN MINDEST-SCHUTZZIELES IST MITTELS EINER GEFäHRDUNGSBEURTEILUNG NACH BETRSICHV ZU ERMITTELN.



Vendedor: BEMA
Año de construcción: usado
Ubicación: Land-built in 1987, 2 turret, control traub tx 8 d, synchronous setup on revolver i, feeder stamag type dn 42, rebuilt by fa ulmer in 2005, hours of operation: 31500 h.
spindle passage 42 mm
gr. drehdurchm. 140 mm
gr. turning length 220 mm
spindle speeds up to 5600 rpm
number of tool holder in two revolvers each 12
spindle drive 16 kw
weight of the machine 4.1 t
accessories: coolant system, tensioning clamp device, tool holders. BUILT IN 1987, 2 TURRET, CONTROL TRAUB TX 8 D, SYNCHRONOUS SETUP ON REVOLVER I, FEEDER STAMAG TYPE DN 42, REBUILT BY FA ULMER IN 2005, HOURS OF OPERATION: 31500 H. SPINDLE PASSAGE 42 MM GR. DREHDURCHM. 140 MM GR. TURNING LENGTH 220 MM SPINDLE SPEEDS UP TO 5600 RPM NUMBER OF TOOL HOLDER IN TWO REVOLVERS EACH 12 SPINDLE DRIVE 16 KW WEIGHT OF THE MACHINE 4.1 T ACCESSORIES: COOLANT SYSTEM, TENSIONING CLAMP DEVICE, TOOL HOLDERS.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-filling capacity:        <br/>power capacity:  kw<br/>tank shape:  <br/>--------------------------------------------------:  <br/>working range -deburring machine-:  <br/>- design: trough vibrator:        <br/>- total volume:   1000 ltr<br/>electrical specifications:  <br/>- total power consumption:    6.6 kw<br/>- mains voltage:    400 v<br/>- mains frequency:     60 hz<br/><br/><br/><br/><br/> FILLING CAPACITY:
POWER CAPACITY: KW
TANK SHAPE:
--------------------------------------------------:
WORKING RANGE -DEBURRING MACHINE-:
- DESIGN: TROUGH VIBRATOR:
- TOTAL VOLUME: 1000 LTR
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 6.6 KW
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 60 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-vertical honing machine gehring

honing diameter: 12-45 mm
honing length max: 250 mm
 	 
length of stroke: 5-350 mm
lifting speed 18 m / min.
 	 
spindle speed: 200-1,000 1/min.
control: gehring honing control ii.
 	 
equipped with:
	-rotary table for 3 positions
 	-motor deburring brush
 	-oil paper band filter
 	-operating instructions VERTICAL HONING MACHINE GEHRING HONING DIAMETER: 12-45 MM HONING LENGTH MAX: 250 MM LENGTH OF STROKE: 5-350 MM LIFTING SPEED 18 M / MIN. SPINDLE SPEED: 200-1,000 1/MIN. CONTROL: GEHRING HONING CONTROL II. EQUIPPED WITH: -ROTARY TABLE FOR 3 POSITIONS -MOTOR DEBURRING BRUSH -OIL PAPER BAND FILTER -OPERATING INSTRUCTIONS
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-filling capacity:        <br/>power capacity:  kw<br/>tank shape:  <br/>--------------------------------------------------:  <br/>working range -deburring machine-:  <br/>- design: trough vibrator:        <br/>- total volume:   1000 ltr<br/>electrical specifications:  <br/>- total power consumption:    6.6 kw<br/>- mains voltage:    400 v<br/>- mains frequency:     60 hz<br/>dimensions / weights:  <br/>- total weight approx.:   2110 kg<br/><br/><br/><br/><br/> FILLING CAPACITY:
POWER CAPACITY: KW
TANK SHAPE:
--------------------------------------------------:
WORKING RANGE -DEBURRING MACHINE-:
- DESIGN: TROUGH VIBRATOR:
- TOTAL VOLUME: 1000 LTR
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 6.6 KW
- MAINS VOLTAGE: 400 V
- MAINS FREQUENCY: 60 HZ
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 2110 KG




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand edging, inspection and slitting line
mfc.: 	rs gmbh, siemens         	built: 	1987         modified: 	1991
operation speed:     	380 m/min. max.        	strip width: 	330-1720 mm 
thickness:   0.3 – 2.99 mm          web width: 	31 mm min. – 1540 (1570) mm max.
strip tension:		6000 – 60 000 n	eding width:	580 mm min. – 1555 mm max.
no. of knives:  	16 max.                 coil od: 	2000 mm            
decoiler od: 		1850 mm			coil weight:  	25 t max.
scope of supply:  decoiler	driver 1 	thickness gauge ink jet printer 
inspection stand	side guiding unit 1	driver 2	crop shear	
welding machine 	inspection unit 	hole punching unit	driver 3
oiling unit (spray system)	side guiding unit 2	slitting and edging unit 
deburring		cropping shear	strip tension measuring roll		
braking roller stand	coiler
 QTY. 1 SECOND-HAND EDGING, INSPECTION AND SLITTING LINE MFC.: RS GMBH, SIEMENS BUILT: 1987 MODIFIED: 1991 OPERATION SPEED: 380 M/MIN. MAX. STRIP WIDTH: 330-1720 MM THICKNESS: 0.3 – 2.99 MM WEB WIDTH: 31 MM MIN. – 1540 (1570) MM MAX. STRIP TENSION: 6000 – 60 000 N EDING WIDTH: 580 MM MIN. – 1555 MM MAX. NO. OF KNIVES: 16 MAX. COIL OD: 2000 MM DECOILER OD: 1850 MM COIL WEIGHT: 25 T MAX. SCOPE OF SUPPLY: DECOILER DRIVER 1 THICKNESS GAUGE INK JET PRINTER INSPECTION STAND SIDE GUIDING UNIT 1 DRIVER 2 CROP SHEAR WELDING MACHINE INSPECTION UNIT HOLE PUNCHING UNIT DRIVER 3 OILING UNIT (SPRAY SYSTEM) SIDE GUIDING UNIT 2 SLITTING AND EDGING UNIT DEBURRING CROPPING SHEAR STRIP TENSION MEASURING ROLL BRAKING ROLLER STAND COILER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-filling capacity:        <br/>power capacity:  kw<br/>tank shape:  <br/>--------------------------------------------------:  <br/>working range -deburring machine-:  <br/>- total volume:    283 ltr<br/>electrical specifications:  <br/>- total power consumption:    7.5 kw<br/>- mains power supply:     14 kva<br/>- mains voltage:    460 v<br/>- mains frequency:     60 hz<br/><br/><br/><br/><br/> FILLING CAPACITY:
POWER CAPACITY: KW
TANK SHAPE:
--------------------------------------------------:
WORKING RANGE -DEBURRING MACHINE-:
- TOTAL VOLUME: 283 LTR
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 7.5 KW
- MAINS POWER SUPPLY: 14 KVA
- MAINS VOLTAGE: 460 V
- MAINS FREQUENCY: 60 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-we are pleased to offer: 
pie round and backing book machine. model lb-41.-rebuilt 2003. serial number: 174. 

pie first self-adjusting rounder & backer that is operating successfully for over half a century in binderies worldwide. manufactured by mekatronics. 

driven by electrical power and hydraulics 
oil tank in the bottom of the machine. 
books are positioned at the top of the machine, spine down. 
the jaws grip the book and a forming roller spreads the spine to create the rounding and backing 
the machine produces a traditional shoulder on the front and back of the book to enable the boards to align with the spine when the book is bound and closed. 

technical data range 
minimum maximum cycle time 5 seconds 
height 4 [102] 15 [381] 
power 5 kw, 220 v, 3 phase, 60 hz. 
width 4 [102] 15 [381] floor space 29x 40 [740 x 1,020] bulk [6] 3-1/4 [83] 
weight (gross) approx. 2,000 lbs [907 kg] 

very good condition 

 WE ARE PLEASED TO OFFER: PIE ROUND AND BACKING BOOK MACHINE. MODEL LB-41.-REBUILT 2003. SERIAL NUMBER: 174. PIE FIRST SELF-ADJUSTING ROUNDER & BACKER THAT IS OPERATING SUCCESSFULLY FOR OVER HALF A CENTURY IN BINDERIES WORLDWIDE. MANUFACTURED BY MEKATRONICS. DRIVEN BY ELECTRICAL POWER AND HYDRAULICS OIL TANK IN THE BOTTOM OF THE MACHINE. BOOKS ARE POSITIONED AT THE TOP OF THE MACHINE, SPINE DOWN. THE JAWS GRIP THE BOOK AND A FORMING ROLLER SPREADS THE SPINE TO CREATE THE ROUNDING AND BACKING THE MACHINE PRODUCES A TRADITIONAL SHOULDER ON THE FRONT AND BACK OF THE BOOK TO ENABLE THE BOARDS TO ALIGN WITH THE SPINE WHEN THE BOOK IS BOUND AND CLOSED. TECHNICAL DATA RANGE MINIMUM MAXIMUM CYCLE TIME 5 SECONDS HEIGHT 4 [102] 15 [381] POWER 5 KW, 220 V, 3 PHASE, 60 HZ. WIDTH 4 [102] 15 [381] FLOOR SPACE 29X 40 [740 X 1,020] BULK [6] 3-1/4 [83] WEIGHT (GROSS) APPROX. 2,000 LBS [907 KG] VERY GOOD CONDITION
Vendedor: Jerry Curtin Limited
Año de construcción: usado
Ubicación: Land-filling capacity:        <br/>power capacity:  kw<br/>tank shape:  <br/>--------------------------------------------------:  <br/>working range -deburring machine-:  <br/>- design: trough vibrator:        <br/>- total volume:    283 ltr<br/>electrical specifications:  <br/>- total power consumption:    7.5 kw<br/>- mains power supply:     14 kva<br/>- mains voltage:    460 v<br/>- mains frequency:     60 hz<br/><br/><br/><br/><br/> FILLING CAPACITY:
POWER CAPACITY: KW
TANK SHAPE:
--------------------------------------------------:
WORKING RANGE -DEBURRING MACHINE-:
- DESIGN: TROUGH VIBRATOR:
- TOTAL VOLUME: 283 LTR
ELECTRICAL SPECIFICATIONS:
- TOTAL POWER CONSUMPTION: 7.5 KW
- MAINS POWER SUPPLY: 14 KVA
- MAINS VOLTAGE: 460 V
- MAINS FREQUENCY: 60 HZ




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-deburring machine / wet grinder weber nlc 900
year 2011 DEBURRING MACHINE / WET GRINDER WEBER NLC 900 YEAR 2011
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 230 kg<br/>dimensions (l x w x h) approx.: 1670 x 900 x 1390 mm<br/>description: 2 stations with a total of 3 rotating brushes<br> suitable for processing straight edges or contours<br> WEIGHT APPROX.: 230 KG
DIMENSIONS (L X W X H) APPROX.: 1670 X 900 X 1390 MM
DESCRIPTION: 2 STATIONS WITH A TOTAL OF 3 ROTATING BRUSHES
SUITABLE FOR PROCESSING STRAIGHT EDGES OR CONTOURS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-clivet wart-2 2,130

produktnummer: m19-4325
kühlleistung: 272 kw
anzahl der fans: 6
kältemittel: r407c
kältemittelgehalt: 40 + 45 kg
nennspannung: 400 volt
motorleistung: 139 kw
abmessungen: 2950 x 2050 x 2150 mm
weight: 3800 kg
baujahr: 2003
auf bearing: 1 stück
preis: auf anfrage

luftgekühlter clivet-wasserkühler mit 6 fans und sich auf 2 2 compressors, which kreisläufe verteilen. bei einer kapazität von wassertemperatur erwähnte 12/7 ° c (ein/aus) und einer umgebungstemperatur von + 35 ° c.

besuchen sie auch unsere site: used-refrigeration CLIVET WART-2 2,130 PRODUKTNUMMER: M19-4325 KüHLLEISTUNG: 272 KW ANZAHL DER FANS: 6 KäLTEMITTEL: R407C KäLTEMITTELGEHALT: 40 + 45 KG NENNSPANNUNG: 400 VOLT MOTORLEISTUNG: 139 KW ABMESSUNGEN: 2950 X 2050 X 2150 MM WEIGHT: 3800 KG BAUJAHR: 2003 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE LUFTGEKüHLTER CLIVET-WASSERKüHLER MIT 6 FANS UND SICH AUF 2 2 COMPRESSORS, WHICH KREISLäUFE VERTEILEN. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 12/7 ° C (EIN/AUS) UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE AUCH UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 2400 mm<br/>turning diameter over slide rest: 2000 mm<br/>turning length: 8000 mm<br/>faceplate diameter max.: 2000 mm<br/>workpiece weight in steadies max.: 60000 kg<br/>bed width: 2190 mm<br/>spindle turning speed range: 0,45 - 90 u/min<br/>feeds: 0,18 - 5,6 mm/u<br/>main drive motor: 60 kw<br/>total power requirement: ca. 80 kw<br/>weight of the machine ca.: 47 t<br/>dimensions of the machine ca.: 14,5 x 3,6 x 2,95 m<br/>2008 new electric and partl. rebuilt<br/>2 steadies<br/>1 face plate dia. 2000 mm<br/>handbooks<br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 2400 MM
TURNING DIAMETER OVER SLIDE REST: 2000 MM
TURNING LENGTH: 8000 MM
FACEPLATE DIAMETER MAX.: 2000 MM
WORKPIECE WEIGHT IN STEADIES MAX.: 60000 KG
BED WIDTH: 2190 MM
SPINDLE TURNING SPEED RANGE: 0,45 - 90 U/MIN
FEEDS: 0,18 - 5,6 MM/U
MAIN DRIVE MOTOR: 60 KW
TOTAL POWER REQUIREMENT: CA. 80 KW
WEIGHT OF THE MACHINE CA.: 47 T
DIMENSIONS OF THE MACHINE CA.: 14,5 X 3,6 X 2,95 M
2008 NEW ELECTRIC AND PARTL. REBUILT
2 STEADIES
1 FACE PLATE DIA. 2000 MM
HANDBOOKS




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-lennox pcc 015 cs

produktnummer: m19-4334
kühlleistung: 17 kw
anzahl der fans: 2
kältemittel: r410a
kältemittelgehalt: 2.6 kg
nennspannung: 400 volt
leistungsaufnahme: 5.7 kw
abmessungen: 1500 x 650 x 1400 mm
weight: 250 kg
baujahr: neu/ungebraucht/2014
auf bearing: 1 stück
preis: auf anfrage

neue luftgekühlte lennox-kaltwassermaschine mit 2 fans. bei einer kapazität von wassertemperatur erwähnte 12/7 ° c und einer umgebungstemperatur von + 35 ° c.

besuchen sie auch unsere site: used-refrigeration LENNOX PCC 015 CS PRODUKTNUMMER: M19-4334 KüHLLEISTUNG: 17 KW ANZAHL DER FANS: 2 KäLTEMITTEL: R410A KäLTEMITTELGEHALT: 2.6 KG NENNSPANNUNG: 400 VOLT LEISTUNGSAUFNAHME: 5.7 KW ABMESSUNGEN: 1500 X 650 X 1400 MM WEIGHT: 250 KG BAUJAHR: NEU/UNGEBRAUCHT/2014 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE NEUE LUFTGEKüHLTE LENNOX-KALTWASSERMASCHINE MIT 2 FANS. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 12/7 ° C UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE AUCH UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Ubicación: Land-trane rtac 275

produktnummer: m19-4332
kühlleistung: 947 kw
anzahl der fans: 16
kältemittel: r134a
kältemittelgehalt: 154 + 93 kg
nennspannung: 400 volt
leistungsaufnahme: 331 kw
abmessungen: 9200 x 2300 x 2500 mm
weight: 8450 kg
baujahr: 2002
auf bearing: 1 stück
preis: auf anfrage

schöne kaltwassermaschine mit luftgekühlte trane 16 fans und sich auf 2 kreisläufe 3 kompressoren, verteilen. bei einer kapazität von wassertemperatur erwähnte 7 ° c (ausgang) und einer umgebungstemperatur von + 35 ° c.

besuchen sie unsere site: used-refrigeration TRANE RTAC 275 PRODUKTNUMMER: M19-4332 KüHLLEISTUNG: 947 KW ANZAHL DER FANS: 16 KäLTEMITTEL: R134A KäLTEMITTELGEHALT: 154 + 93 KG NENNSPANNUNG: 400 VOLT LEISTUNGSAUFNAHME: 331 KW ABMESSUNGEN: 9200 X 2300 X 2500 MM WEIGHT: 8450 KG BAUJAHR: 2002 AUF BEARING: 1 STüCK PREIS: AUF ANFRAGE SCHöNE KALTWASSERMASCHINE MIT LUFTGEKüHLTE TRANE 16 FANS UND SICH AUF 2 KREISLäUFE 3 KOMPRESSOREN, VERTEILEN. BEI EINER KAPAZITäT VON WASSERTEMPERATUR ERWäHNTE 7 ° C (AUSGANG) UND EINER UMGEBUNGSTEMPERATUR VON + 35 ° C. BESUCHEN SIE UNSERE SITE: USED-REFRIGERATION
Vendedor: VRT International B.V.
Año de construcción: usado
Precio: used machinery auction RESALE 3.100 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 4000 x 2000 x 2400 mm<br/>description: 1900 x 930 mm<br> WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2000 X 2400 MM
DESCRIPTION: 1900 X 930 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.850 €
Ubicación: Land-on exclusive sale next 11 april 2019 at 11:00 a.m. in cazzago san martino bs
to view the lot, please contact us at 0307751645 and make an appointment.
single lot building equipment consisting of:
n. 1 fenwitch translating forklift truck (about 14.000 wh);
n. 1 automatic leveler for moba vibratory paver;
n. 1 riel starjet 200/15 high pressure washer;
n. 1 asturo compressor; n. 1 workshop equipment;
n. 1 single-valent welding machine brand siev;
n. 1 wire savior brand telwin mod. mastermig 300;
n. 1 600a battery charger; n. 1 motor-generator; n. 1 pair of traffic lights;
block of signs and various signs; n. 1 water lifting unit;
n. 1 topcon autolevel mod. at-g6; n. 1 laser for sewers brand vidalaser;
n. 1 clock for employees; n. 1 aluminium ladder with three elements;
n. 2 nebulizers; n. 1 level brand kern mod. gko-acs;
n. 1 rotary laser brand david white;
notes:
goods sold seen and liked ON EXCLUSIVE SALE NEXT 11 APRIL 2019 AT 11:00 A.M. IN CAZZAGO SAN MARTINO BS TO VIEW THE LOT, PLEASE CONTACT US AT 0307751645 AND MAKE AN APPOINTMENT. SINGLE LOT BUILDING EQUIPMENT CONSISTING OF: N. 1 FENWITCH TRANSLATING FORKLIFT TRUCK (ABOUT 14.000 WH); N. 1 AUTOMATIC LEVELER FOR MOBA VIBRATORY PAVER; N. 1 RIEL STARJET 200/15 HIGH PRESSURE WASHER; N. 1 ASTURO COMPRESSOR; N. 1 WORKSHOP EQUIPMENT; N. 1 SINGLE-VALENT WELDING MACHINE BRAND SIEV; N. 1 WIRE SAVIOR BRAND TELWIN MOD. MASTERMIG 300; N. 1 600A BATTERY CHARGER; N. 1 MOTOR-GENERATOR; N. 1 PAIR OF TRAFFIC LIGHTS; BLOCK OF SIGNS AND VARIOUS SIGNS; N. 1 WATER LIFTING UNIT; N. 1 TOPCON AUTOLEVEL MOD. AT-G6; N. 1 LASER FOR SEWERS BRAND VIDALASER; N. 1 CLOCK FOR EMPLOYEES; N. 1 ALUMINIUM LADDER WITH THREE ELEMENTS; N. 2 NEBULIZERS; N. 1 LEVEL BRAND KERN MOD. GKO-ACS; N. 1 ROTARY LASER BRAND DAVID WHITE; NOTES: GOODS SOLD SEEN AND LIKED
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: used machinery auction RESALE 4.900 €
Ubicación: Land-weight approx.: 8500 kg<br/>dimensions (l x w x h) approx.: 4000 x 2500 x 2500 mm<br/>description: cnc control 840 c<br> working range:<br> max. swing diameter over bed 540 mm<br> max. swing diameter over cross slide continuous 410 mm<br> max. workpiece weight approx. 300 kg flying<br> working spindle:<br> spindle head according to din 55026<br> size a8<br> spindle diameter front bearing 140 mm<br> max. torque 940 nm<br> spindle bore 97 mm<br> max. chuck diameter 315 mm<br> number of bed slides: 2<br> longitudinal stroke 955<br> number of cross slides: 2<br> facing stroke: 300<br> feed speed:<br> longitudinal slide 15000 mm/min<br> cross slide 10000 mm/min<br> spindle speed in 1/min stepless from 31.5 to 3150 rotations/min<br> <br> weight approx. 8500 kg<br> space requirement:<br> l: 4.0 m<br> w: 2.5 m<br> h: 2.5 m<br> WEIGHT APPROX.: 8500 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2500 X 2500 MM
DESCRIPTION: CNC CONTROL 840 C
WORKING RANGE:
MAX. SWING DIAMETER OVER BED 540 MM
MAX. SWING DIAMETER OVER CROSS SLIDE CONTINUOUS 410 MM
MAX. WORKPIECE WEIGHT APPROX. 300 KG FLYING
WORKING SPINDLE:
SPINDLE HEAD ACCORDING TO DIN 55026
SIZE A8
SPINDLE DIAMETER FRONT BEARING 140 MM
MAX. TORQUE 940 NM
SPINDLE BORE 97 MM
MAX. CHUCK DIAMETER 315 MM
NUMBER OF BED SLIDES: 2
LONGITUDINAL STROKE 955
NUMBER OF CROSS SLIDES: 2
FACING STROKE: 300
FEED SPEED:
LONGITUDINAL SLIDE 15000 MM/MIN
CROSS SLIDE 10000 MM/MIN
SPINDLE SPEED IN 1/MIN STEPLESS FROM 31.5 TO 3150 ROTATIONS/MIN

WEIGHT APPROX. 8500 KG
SPACE REQUIREMENT:
L: 4.0 M
W: 2.5 M
H: 2.5 M
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-for sale, we offer two chp deutz/mwm tbg 620 v 16 k. scope of delivery: cabinets, gas lines, silencers, platt heat exchangers and documents. the chp had been until its closure in the operation and is functional, excellent condition! 

technical data:

engine: deutz/mwm
type: tbg 620 v16k
power: 1400 kw
year of construction: 1997

builder: leroy somer 1358 kw, 10500 v, 1500 1/min, hours of operation: 106.700 h, at 90,000 h rebuilt, year of construction: 1997 FOR SALE, WE OFFER TWO CHP DEUTZ/MWM TBG 620 V 16 K. SCOPE OF DELIVERY: CABINETS, GAS LINES, SILENCERS, PLATT HEAT EXCHANGERS AND DOCUMENTS. THE CHP HAD BEEN UNTIL ITS CLOSURE IN THE OPERATION AND IS FUNCTIONAL, EXCELLENT CONDITION! TECHNICAL DATA: ENGINE: DEUTZ/MWM TYPE: TBG 620 V16K POWER: 1400 KW YEAR OF CONSTRUCTION: 1997 BUILDER: LEROY SOMER 1358 KW, 10500 V, 1500 1/MIN, HOURS OF OPERATION: 106.700 H, AT 90,000 H REBUILT, YEAR OF CONSTRUCTION: 1997
Vendedor: BA-Generatoren
Año de construcción: usado
Ubicación: Land-spindle passage:155 mm<br/>turning diameter over bed:805 mm<br/>turning diameter over slide:515 mm<br/>turning length:3000 mm<br/>control:fagor 8055 <br/>max. swing over slide:515 mm<br/>bed width:425 mm<br/>spindle taper:a2-8 <br/>spindle speeds:0-1700 1/min.<br/>spindle bore:155 mm<br/>transmission ratio:2 <br/>tailstock quill diameter:96 mm<br/>tailstock quill stroke:215 mm<br/>taper of tailstock quill:6 mk<br/>max. length of work piece:3000 mm<br/>rapid traverse x/z:10/10 m/min<br/>power requirement:17 kw<br/>weight of the machine ca.:7560 kg<br/>dimensions of the machine ca.:5530x1800x2230 mm<br/>automatic tool changer:8-fach <br/>european electric: <br/>cnc controller:fagor 8055 <br/>ce-design: <br/>tools:1 satz <br/>machine work light: <br/>coolant system: <br/>automatic lubrication system: <br/>electric handwheel: <br/>servo spindle motor: <br/>machine semi-cover: <br/>: <br/>3 chip conveyor: <br/>:auf vorder- und rückseite der spindel, jeweils Ø500m (800 1/min) <br/>mpg hand wheel:kabelgebunden <br/><br/>new cnc lathe kraft st 400/3000 with fanuc oi mate td  made in europe  for more information please see the attached documents SPINDLE PASSAGE:155 MM
TURNING DIAMETER OVER BED:805 MM
TURNING DIAMETER OVER SLIDE:515 MM
TURNING LENGTH:3000 MM
CONTROL:FAGOR 8055
MAX. SWING OVER SLIDE:515 MM
BED WIDTH:425 MM
SPINDLE TAPER:A2-8
SPINDLE SPEEDS:0-1700 1/MIN.
SPINDLE BORE:155 MM
TRANSMISSION RATIO:2
TAILSTOCK QUILL DIAMETER:96 MM
TAILSTOCK QUILL STROKE:215 MM
TAPER OF TAILSTOCK QUILL:6 MK
MAX. LENGTH OF WORK PIECE:3000 MM
RAPID TRAVERSE X/Z:10/10 M/MIN
POWER REQUIREMENT:17 KW
WEIGHT OF THE MACHINE CA.:7560 KG
DIMENSIONS OF THE MACHINE CA.:5530X1800X2230 MM
AUTOMATIC TOOL CHANGER:8-FACH
EUROPEAN ELECTRIC:
CNC CONTROLLER:FAGOR 8055
CE-DESIGN:
TOOLS:1 SATZ
MACHINE WORK LIGHT:
COOLANT SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
ELECTRIC HANDWHEEL:
SERVO SPINDLE MOTOR:
MACHINE SEMI-COVER:
:
3 CHIP CONVEYOR:
:AUF VORDER- UND RüCKSEITE DER SPINDEL, JEWEILS Ø500M (800 1/MIN)
MPG HAND WHEEL:KABELGEBUNDEN

NEW CNC LATHE KRAFT ST 400/3000 WITH FANUC OI MATE TD MADE IN EUROPE FOR MORE INFORMATION PLEASE SEE THE ATTACHED DOCUMENTS
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-collar arm shelf l = 2000 mm, w = 2000mm, h = 3000mm
2 stand b = 2000 x h = 3000 mm
4 arms 1950 mm
2 verstebungen
11 round beams 640 mm COLLAR ARM SHELF L = 2000 MM, W = 2000MM, H = 3000MM 2 STAND B = 2000 X H = 3000 MM 4 ARMS 1950 MM 2 VERSTEBUNGEN 11 ROUND BEAMS 640 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-spindle diameter:160 mm<br/>x-travel:4000 mm<br/>y-travel:2000 mm<br/>weight of the machine ca.:20 t<br/><br/>used table type boring and milling maschine, make schiess.  totally rebuilt 1999, table extension & agle head, atc via rack. x, y, z w are full cnc. b runs maually with separate display for position. SPINDLE DIAMETER:160 MM
X-TRAVEL:4000 MM
Y-TRAVEL:2000 MM
WEIGHT OF THE MACHINE CA.:20 T

USED TABLE TYPE BORING AND MILLING MASCHINE, MAKE SCHIESS. TOTALLY REBUILT 1999, TABLE EXTENSION & AGLE HEAD, ATC VIA RACK. X, Y, Z W ARE FULL CNC. B RUNS MAUALLY WITH SEPARATE DISPLAY FOR POSITION.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 8.995 €
Ubicación: Land-forwarding cnc tool machine maho sales only at commercial cnc tool machine maho type mh 600 e2 masch. no. 660576 cnc railway control of philips 432 driveways x: 600 mm y: 400 mm z 450 mm tischgrã¶ã?e900 x 480 mm werkzeugwechsler20 fold spindle taper iso 40 din 69871 with pull stud din 7388/ii tool clamp hydraulic spindle speed 20-4000 rpm. 
infinitely programmable feed 1-4000 mm / min. 
continuously rapid traverse x and z = 6 m / min, y = 5 m / min. 
pinolverschiebung vertikal80 mm spindelantrieb5, 5 kw netzanschluã?380 volt, 50 hz, 12 kva - solid angle table splash guard cabin as table housing with 3 folding doors swivel mechanism for the vertical milling head - v24 interface for data transmission -. 
tiltable control panel coolant system with coolant pump central oil lubrication bird 26126 operating hours
documentation FORWARDING CNC TOOL MACHINE MAHO SALES ONLY AT COMMERCIAL CNC TOOL MACHINE MAHO TYPE MH 600 E2 MASCH. NO. 660576 CNC RAILWAY CONTROL OF PHILIPS 432 DRIVEWAYS X: 600 MM Y: 400 MM Z 450 MM TISCHGR&ATILDE;&PARA;&ATILDE;?E900 X 480 MM WERKZEUGWECHSLER20 FOLD SPINDLE TAPER ISO 40 DIN 69871 WITH PULL STUD DIN 7388/II TOOL CLAMP HYDRAULIC SPINDLE SPEED 20-4000 RPM. INFINITELY PROGRAMMABLE FEED 1-4000 MM / MIN. CONTINUOUSLY RAPID TRAVERSE X AND Z = 6 M / MIN, Y = 5 M / MIN. PINOLVERSCHIEBUNG VERTIKAL80 MM SPINDELANTRIEB5, 5 KW NETZANSCHLU&ATILDE;?380 VOLT, 50 HZ, 12 KVA - SOLID ANGLE TABLE SPLASH GUARD CABIN AS TABLE HOUSING WITH 3 FOLDING DOORS SWIVEL MECHANISM FOR THE VERTICAL MILLING HEAD - V24 INTERFACE FOR DATA TRANSMISSION -. TILTABLE CONTROL PANEL COOLANT SYSTEM WITH COOLANT PUMP CENTRAL OIL LUBRICATION BIRD 26126 OPERATING HOURS DOCUMENTATION
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-grinding length:3000 mm<br/>grinding width:600 mm<br/>workpiece height: mm<br/>magnetic-table:2800 x 450 mm<br/>gear diameter:510 mm<br/>speeds:950 u/min<br/>min/max. table longitudinal travel:1-35 mm/min<br/>hydraulic unit:11 kw<br/>weight:15250 kg<br/>spindle drive:45 kw<br/>dimensions of the machine ca.:8100 x 2500 x h3420 m<br/><br/>table 460 x 3500 mm magnetic plate: 450 x 2800 mm working stroke: 3000 mm max. suite 600 mm wheel diameter 510 mm - vertical forward of the wheel 0.005 to 0.1 mm - table speed 1-35 m / min spindle 45 kilowatts rotation speed of 960 rev / min hydraulic power unit: 11 kilowatts suction unit for dry work machine dimensions: 8100 x 2500 x h3420 weight: 15 250 kg - year: 1971 machine completely rebuilt to new and never used since its retrofit. machine equipped to operate with a central irrigation and filtration. GRINDING LENGTH:3000 MM
GRINDING WIDTH:600 MM
WORKPIECE HEIGHT: MM
MAGNETIC-TABLE:2800 X 450 MM
GEAR DIAMETER:510 MM
SPEEDS:950 U/MIN
MIN/MAX. TABLE LONGITUDINAL TRAVEL:1-35 MM/MIN
HYDRAULIC UNIT:11 KW
WEIGHT:15250 KG
SPINDLE DRIVE:45 KW
DIMENSIONS OF THE MACHINE CA.:8100 X 2500 X H3420 M

TABLE 460 X 3500 MM MAGNETIC PLATE: 450 X 2800 MM WORKING STROKE: 3000 MM MAX. SUITE 600 MM WHEEL DIAMETER 510 MM - VERTICAL FORWARD OF THE WHEEL 0.005 TO 0.1 MM - TABLE SPEED 1-35 M / MIN SPINDLE 45 KILOWATTS ROTATION SPEED OF 960 REV / MIN HYDRAULIC POWER UNIT: 11 KILOWATTS SUCTION UNIT FOR DRY WORK MACHINE DIMENSIONS: 8100 X 2500 X H3420 WEIGHT: 15 250 KG - YEAR: 1971 MACHINE COMPLETELY REBUILT TO NEW AND NEVER USED SINCE ITS RETROFIT. MACHINE EQUIPPED TO OPERATE WITH A CENTRAL IRRIGATION AND FILTRATION.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pipe cutter ebu PIPE CUTTER EBU
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 7.000 €
Ubicación: Land-weight approx.: 12600 kg<br/>dimensions (l x w x h) approx.: 8000 x 4300 x 2300 mm<br/>description: cutting length 4040 mm. cutting thickness 8 mm. motor power 12 hp. control mecos ibericacn3212c. automatic cut piece output. internal reference 11601 WEIGHT APPROX.: 12600 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 4300 X 2300 MM
DESCRIPTION: CUTTING LENGTH 4040 MM. CUTTING THICKNESS 8 MM. MOTOR POWER 12 HP. CONTROL MECOS IBERICACN3212C. AUTOMATIC CUT PIECE OUTPUT. INTERNAL REFERENCE 11601
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-elopak p-s50 drink milk filling line 
5.000 cartons per hour 
0,2lt 0,5lt and 1 lt 
complete rebuilt in 2010 
excellent condition 
 ELOPAK P-S50 DRINK MILK FILLING LINE 5.000 CARTONS PER HOUR 0,2LT 0,5LT AND 1 LT COMPLETE REBUILT IN 2010 EXCELLENT CONDITION
Vendedor: BAYRAM MAKINA
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-weight approx.: 310 kg<br/>dimensions (l x w x h) approx.: 2300 x 1000 x 900 mm<br/>description: allow to make chamfers to 1 mm on every material with thickness from 0,5 mm up to 30 mm, even coated or painted parts.<br> <br> the second head has free belt with vertical sliding as to the moving piece direction. it makes chamfer in one stroke on both sides of the corner.<br> <br> the deburring depending on the speed of the conveyor (adjustable electronically) and the grain of the abrasives.<br> <br> minimum format size: 15 x 90 mm.<br> minimum piece size: 500 x 400 mm. WEIGHT APPROX.: 310 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 1000 X 900 MM
DESCRIPTION: ALLOW TO MAKE CHAMFERS TO 1 MM ON EVERY MATERIAL WITH THICKNESS FROM 0,5 MM UP TO 30 MM, EVEN COATED OR PAINTED PARTS.

THE SECOND HEAD HAS FREE BELT WITH VERTICAL SLIDING AS TO THE MOVING PIECE DIRECTION. IT MAKES CHAMFER IN ONE STROKE ON BOTH SIDES OF THE CORNER.

THE DEBURRING DEPENDING ON THE SPEED OF THE CONVEYOR (ADJUSTABLE ELECTRONICALLY) AND THE GRAIN OF THE ABRASIVES.

MINIMUM FORMAT SIZE: 15 X 90 MM.
MINIMUM PIECE SIZE: 500 X 400 MM.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-combine harvester claas dominator 78s, bj. 1988, 6 cyl. perkins engine, cab, air, chopper, cutter 3 m, ber.: shaker 18.4/15-30 and 12.5/80-15.3, 4 COMBINE HARVESTER CLAAS DOMINATOR 78S, BJ. 1988, 6 CYL. PERKINS ENGINE, CAB, AIR, CHOPPER, CUTTER 3 M, BER.: SHAKER 18.4/15-30 AND 12.5/80-15.3, 4
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Ubicación: Land-max. wheel diameter: mm<br/>gear width: mm<br/>max. module: <br/>min. module: <br/>total power requirement: kw<br/>weight of the machine ca.: t<br/>dimensions of the machine ca.: m<br/><br/>gear chamfering and deburring MAX. WHEEL DIAMETER: MM
GEAR WIDTH: MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

GEAR CHAMFERING AND DEBURRING
Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-combine harvester claas dominator 48, bj. 1983, 4 cyl. 75 hp perkins engine, cabin, chopper, cutter 2.75 m, ber.: 14.9-26 and 11.5/80-15.3, 4 shaker COMBINE HARVESTER CLAAS DOMINATOR 48, BJ. 1983, 4 CYL. 75 HP PERKINS ENGINE, CABIN, CHOPPER, CUTTER 2.75 M, BER.: 14.9-26 AND 11.5/80-15.3, 4 SHAKER
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Precio: 1.550 €
Ubicación: Land-: 75 mm<br/>: 2.000 x 75 mm<br/>: 200 x 75 x 42 mm<br/>: 605 mm<br/>: 2.800 1/ min<br/>: 3 kw<br/>: 90 kg<br/>double suction unit<br/>closed grinding head for effective suction<br/>brake motor<br/>thermal overload protection<br/>adjustable  workpiece support<br/>eye protection<br/>adjustable working height<br/>grinding belt quick change system<br/>high band speed<br/>large surface grinding area<br/>quick deburring<br/>large contact wheel<br/>users manual in german<br/>machine and equipment according to the ce-regulations<br/><br/>grinding width: 75 mm<br/>belt dimensions: 2.000 x 75 mm<br/>contact wheel: 200 x 75 x 42 mm<br/>grinding table: 605 mm<br/>speed: 2.800 1/min<br/>suction capacity: 630 m³/h<br/>motor power: 3 kw<br/>weight: 90 kg<br/><br/><br/><br/> : 75 MM
: 2.000 X 75 MM
: 200 X 75 X 42 MM
: 605 MM
: 2.800 1/ MIN
: 3 KW
: 90 KG
DOUBLE SUCTION UNIT
CLOSED GRINDING HEAD FOR EFFECTIVE SUCTION
BRAKE MOTOR
THERMAL OVERLOAD PROTECTION
ADJUSTABLE  WORKPIECE SUPPORT
EYE PROTECTION
ADJUSTABLE WORKING HEIGHT
GRINDING BELT QUICK CHANGE SYSTEM
HIGH BAND SPEED
LARGE SURFACE GRINDING AREA
QUICK DEBURRING
LARGE CONTACT WHEEL
USERS MANUAL IN GERMAN
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS

GRINDING WIDTH: 75 MM
BELT DIMENSIONS: 2.000 X 75 MM
CONTACT WHEEL: 200 X 75 X 42 MM
GRINDING TABLE: 605 MM
SPEED: 2.800 1/MIN
SUCTION CAPACITY: 630 M³/H
MOTOR POWER: 3 KW
WEIGHT: 90 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more EBU types: