363 ofertas

Año de construcción: usado
Ubicación: Land-pet bottle filling line sig simonazzi 23 000 bph - 2002/2013
 
this line is a complete pet line for beer, carbonated and non carbonated drinks. the line iwas delivered in 2002 by sig simonazzi and it was upgraded in 2011/2013. currently line is installed and powered and it is designed for 1.0 & 1.5 liter with capacity of 23 000 bph.
 
main characteristics
- manufactured in year 2002 upgrade 2011/2013
- capacity 23 000 bph in 1.0 and 1.5 l containers
- total operating hours 38500
- equipment is in very good condition, still installed but ready for immediate relocation.

list of main equipment:
1. pet stretch blow machine blomax 16 sig, (operating hours 38217) with
a. sig box tipper for emptying preform containers
b. preform feeding elevator vzt-2510 with a hopper
c. preform orientator - feeding system
d. water chiller riedel pc 1000 refrigerant r407c
2. blower automatic lubrication system pet 2, year 2009
3. air conveyor system
4. beer analyzer year 2005
5. flash pasteurizer alfa-laval 400 hl/h with vt 40 bc 25 heat exhanger and buffer tank
6. block rinser simonazzi 60 p113 with 60 rinsing heads
7. filling block sig simonazzi tvr eurostar 2000 year 2002, upgrade 2010&2011with arol cap feeding system
8. automatic cip line for filling block
9. filling inspector
10. labeling machine krones prontomatic
11. bottles conveyor, simonazzi
12. laser marker videojet vj3430 year 2010
13. shrink packer smi sk 600t, year 2002 upgrade 2013
14. conveyor system simonazzi for packages
15. printer applicator stay tr602 solv mektek, year 2009, upgrade 2013 (two step marking the front and back)
16. printer-applicator tv102 mectec year2012
17. palletizer simonazzi with pack orienting system
18. pallet stretch wrapping machine robopak genesis, year 2002 upgrade 2012
19. label applicator domino collamat, year 2011   PET BOTTLE FILLING LINE SIG SIMONAZZI 23 000 BPH - 2002/2013 THIS LINE IS A COMPLETE PET LINE FOR BEER, CARBONATED AND NON CARBONATED DRINKS. THE LINE IWAS DELIVERED IN 2002 BY SIG SIMONAZZI AND IT WAS UPGRADED IN 2011/2013. CURRENTLY LINE IS INSTALLED AND POWERED AND IT IS DESIGNED FOR 1.0 & 1.5 LITER WITH CAPACITY OF 23 000 BPH. MAIN CHARACTERISTICS - MANUFACTURED IN YEAR 2002 UPGRADE 2011/2013 - CAPACITY 23 000 BPH IN 1.0 AND 1.5 L CONTAINERS - TOTAL OPERATING HOURS 38500 - EQUIPMENT IS IN VERY GOOD CONDITION, STILL INSTALLED BUT READY FOR IMMEDIATE RELOCATION. LIST OF MAIN EQUIPMENT: 1. PET STRETCH BLOW MACHINE BLOMAX 16 SIG, (OPERATING HOURS 38217) WITH A. SIG BOX TIPPER FOR EMPTYING PREFORM CONTAINERS B. PREFORM FEEDING ELEVATOR VZT-2510 WITH A HOPPER C. PREFORM ORIENTATOR - FEEDING SYSTEM D. WATER CHILLER RIEDEL PC 1000 REFRIGERANT R407C 2. BLOWER AUTOMATIC LUBRICATION SYSTEM PET 2, YEAR 2009 3. AIR CONVEYOR SYSTEM 4. BEER ANALYZER YEAR 2005 5. FLASH PASTEURIZER ALFA-LAVAL 400 HL/H WITH VT 40 BC 25 HEAT EXHANGER AND BUFFER TANK 6. BLOCK RINSER SIMONAZZI 60 P113 WITH 60 RINSING HEADS 7. FILLING BLOCK SIG SIMONAZZI TVR EUROSTAR 2000 YEAR 2002, UPGRADE 2010&2011WITH AROL CAP FEEDING SYSTEM 8. AUTOMATIC CIP LINE FOR FILLING BLOCK 9. FILLING INSPECTOR 10. LABELING MACHINE KRONES PRONTOMATIC 11. BOTTLES CONVEYOR, SIMONAZZI 12. LASER MARKER VIDEOJET VJ3430 YEAR 2010 13. SHRINK PACKER SMI SK 600T, YEAR 2002 UPGRADE 2013 14. CONVEYOR SYSTEM SIMONAZZI FOR PACKAGES 15. PRINTER APPLICATOR STAY TR602 SOLV MEKTEK, YEAR 2009, UPGRADE 2013 (TWO STEP MARKING THE FRONT AND BACK) 16. PRINTER-APPLICATOR TV102 MECTEC YEAR2012 17. PALLETIZER SIMONAZZI WITH PACK ORIENTING SYSTEM 18. PALLET STRETCH WRAPPING MACHINE ROBOPAK GENESIS, YEAR 2002 UPGRADE 2012 19. LABEL APPLICATOR DOMINO COLLAMAT, YEAR 2011
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-10 supports , distance height 140\r\ntotal dimensions: l  1250 mm, w 520 mm, h 1610 mm\r\ngood condition 10 SUPPORTS , DISTANCE HEIGHT 140\R\NTOTAL DIMENSIONS: L 1250 MM, W 520 MM, H 1610 MM\R\NGOOD CONDITION
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-sheet metal dimension max. 1,500 x 3,000 mm, laser power 7,000 w, laser type truflow 7000, laser ref. d0004 b0842, cutting head, refrigeration unit, riedel, type l29 / 51-tr4500, yom 2008, ser. 930918, pallet brush cleaning system, high-speed cutting head, trutops, chip conveyor, autom. loading / unloading system, make trumpf, type liftmaster, year 2007, ser. no. n0023a1128, material no. 0415510, control, make trump, elapsed operating hours beam 18296, laser 43600, total operating hours 44341, 1 item accessories
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 5030, bj. 2008, ser.-nr. a0230a2187, blechmaß max. 1.500 x 3.000 mm, laserleistung 7.000 w, lasertyp truflow 7000, lasernr. d0004 b0842, schneidkopf, kälteaggregat, fabr. riedel, typ l29/51-tr4500, bj. 2008, ser.-nr. 930918, paletten-bürstenreinigungsanlage, highspeed-schneidkopf, trutops, späneförderer, autom. be-/entladesystem, fabr. trumpf, typ liftmaster, bj. 2007, ser.-nr. n0023a1128, materialnr. 0415510, steuerung, fabr.pf, abgel. betriebsstd. strahl ein 18296, laser ein 43600, gesamtbetriebsstd. 44341, 1 posten zubehö
  SHEET METAL DIMENSION MAX. 1,500 X 3,000 MM, LASER POWER 7,000 W, LASER TYPE TRUFLOW 7000, LASER REF. D0004 B0842, CUTTING HEAD, REFRIGERATION UNIT, RIEDEL, TYPE L29 / 51-TR4500, YOM 2008, SER. 930918, PALLET BRUSH CLEANING SYSTEM, HIGH-SPEED CUTTING HEAD, TRUTOPS, CHIP CONVEYOR, AUTOM. LOADING / UNLOADING SYSTEM, MAKE TRUMPF, TYPE LIFTMASTER, YEAR 2007, SER. NO. N0023A1128, MATERIAL NO. 0415510, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS BEAM 18296, LASER 43600, TOTAL OPERATING HOURS 44341, 1 ITEM ACCESSORIES DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 5030, BJ. 2008, SER.-NR. A0230A2187, BLECHMAß MAX. 1.500 X 3.000 MM, LASERLEISTUNG 7.000 W, LASERTYP TRUFLOW 7000, LASERNR. D0004 B0842, SCHNEIDKOPF, KäLTEAGGREGAT, FABR. RIEDEL, TYP L29/51-TR4500, BJ. 2008, SER.-NR. 930918, PALETTEN-BüRSTENREINIGUNGSANLAGE, HIGHSPEED-SCHNEIDKOPF, TRUTOPS, SPäNEFöRDERER, AUTOM. BE-/ENTLADESYSTEM, FABR. TRUMPF, TYP LIFTMASTER, BJ. 2007, SER.-NR. N0023A1128, MATERIALNR. 0415510, STEUERUNG, FABR.PF, ABGEL. BETRIEBSSTD. STRAHL EIN 18296, LASER EIN 43600, GESAMTBETRIEBSSTD. 44341, 1 POSTEN ZUBEHö
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-heating by electric heating elements at the bottom \r\ntemp. variable 1 - 10, tablemodel\r\n HEATING BY ELECTRIC HEATING ELEMENTS AT THE BOTTOM \R\NTEMP. VARIABLE 1 - 10, TABLEMODEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-sheet metal format max. 1,500 x 3,000 mm, laser power 6,000 w, laser type truflow 6000, laser no. d0004 a6095, refrigeration unit, make riedel, type l31 / 37-tr3.04, year 2007, ser. no. 890122, rated power 40.2 kva, pallet brush cleaning system, high-speed cutting head, trutops, chip conveyor, autom. loading / unloading system, make trumpf, type liftmaster, year 2007, ser. no. n0023a0612, material no. 0415510, control, make trump, elapsed operating hours beam on 26525, laser on 49254, total operating hours. 50404, 1 item accessories
de:
cnc-laserschneidanlage, fabr. trumpf, typ trulaser 5030, bj. 2007, ser.-nr. a0230a2065, blechformat max. 1.500 x 3.000 mm, laserleistung 6.000 w, lasertyp truflow 6000, lasernr. d0004 a6095, kühlaggregat, fabr. riedel, typ l31/37-tr3.04, bj. 2007, ser.-nr. 890122, nennleistung 40,2 kva, paletten-bürstenreinigungsanlage, highspeed-schneidkopf, trutops, späneförderer, autom. be-/entladesystem, fabr. trumpf, typ liftmaster, bj. 2007, ser.-nr. n0023a0612, materr. 0415510, steuerung, fabr. trumpf, abgel. betriebsstd. strahl ein 26525, laser ein 49254, gesamtbetriebsstd. 50404, 1 posten zubehö
  SHEET METAL FORMAT MAX. 1,500 X 3,000 MM, LASER POWER 6,000 W, LASER TYPE TRUFLOW 6000, LASER NO. D0004 A6095, REFRIGERATION UNIT, MAKE RIEDEL, TYPE L31 / 37-TR3.04, YEAR 2007, SER. NO. 890122, RATED POWER 40.2 KVA, PALLET BRUSH CLEANING SYSTEM, HIGH-SPEED CUTTING HEAD, TRUTOPS, CHIP CONVEYOR, AUTOM. LOADING / UNLOADING SYSTEM, MAKE TRUMPF, TYPE LIFTMASTER, YEAR 2007, SER. NO. N0023A0612, MATERIAL NO. 0415510, CONTROL, MAKE TRUMP, ELAPSED OPERATING HOURS BEAM ON 26525, LASER ON 49254, TOTAL OPERATING HOURS. 50404, 1 ITEM ACCESSORIES DE: CNC-LASERSCHNEIDANLAGE, FABR. TRUMPF, TYP TRULASER 5030, BJ. 2007, SER.-NR. A0230A2065, BLECHFORMAT MAX. 1.500 X 3.000 MM, LASERLEISTUNG 6.000 W, LASERTYP TRUFLOW 6000, LASERNR. D0004 A6095, KüHLAGGREGAT, FABR. RIEDEL, TYP L31/37-TR3.04, BJ. 2007, SER.-NR. 890122, NENNLEISTUNG 40,2 KVA, PALETTEN-BüRSTENREINIGUNGSANLAGE, HIGHSPEED-SCHNEIDKOPF, TRUTOPS, SPäNEFöRDERER, AUTOM. BE-/ENTLADESYSTEM, FABR. TRUMPF, TYP LIFTMASTER, BJ. 2007, SER.-NR. N0023A0612, MATERR. 0415510, STEUERUNG, FABR. TRUMPF, ABGEL. BETRIEBSSTD. STRAHL EIN 26525, LASER EIN 49254, GESAMTBETRIEBSSTD. 50404, 1 POSTEN ZUBEHö
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-belt: width 630 mm\r\ntable: lenght 3600 mm, width 720 mm\r\naccessories:1 triangle cutter,3 rows, h 175 , w 130 mm  \r\n                  1 cutting cylinders, longitudianal\r\n                     cutting,  3 stripes 175 mm BELT: WIDTH 630 MM\R\NTABLE: LENGHT 3600 MM, WIDTH 720 MM\R\NACCESSORIES:1 TRIANGLE CUTTER,3 ROWS, H 175 , W 130 MM \R\N 1 CUTTING CYLINDERS, LONGITUDIANAL\R\N CUTTING, 3 STRIPES 175 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-erka wmb 50 partially in edelsathlausfã¼hrung with feeder for sale
machine required 380 volts, is mobile with long roller table.

ERKA WMB 50 PARTIALLY IN EDELSATHLAUSFüHRUNG WITH FEEDER FOR SALE MACHINE REQUIRED 380 VOLTS, IS MOBILE WITH LONG ROLLER TABLE.
Vendedor: Bäckereimaschinen An - und Verkauf
Año de construcción: usado
Ubicación: Land-5 axes are programmed into the machine. dividing head, vises, as well as the complete range of accessories in the cabinets, are included.

chip conveyor, as well as hydraulic power pack also.

the machine ran to the end. it was produced only brass.

technical data:

brand: hedelius

type: bc 40 d

control: heidenhain tnc 310

year: 1995

workspace:

x axle 1.600 mm y achse400 mm z achse370 mm

desks support surface 2 x 850 x 420 mm

number of t-slots 3

table load 500 kg

spindle speed range 30-6,000 rpm

a40antriebsleistung s6 performance 16.25 kwmax. torque 102 nm cutting power s6 milling st 50375

cm3bohren st 50ã? 35 mm thread m24

feeds: continuously variable x, y, 30 / 30 / 30 m / minmax.

vorschubkraft7. 000 n 5 AXES ARE PROGRAMMED INTO THE MACHINE. DIVIDING HEAD, VISES, AS WELL AS THE COMPLETE RANGE OF ACCESSORIES IN THE CABINETS, ARE INCLUDED. CHIP CONVEYOR, AS WELL AS HYDRAULIC POWER PACK ALSO. THE MACHINE RAN TO THE END. IT WAS PRODUCED ONLY BRASS. TECHNICAL DATA: BRAND: HEDELIUS TYPE: BC 40 D CONTROL: HEIDENHAIN TNC 310 YEAR: 1995 WORKSPACE: X AXLE 1.600 MM Y ACHSE400 MM Z ACHSE370 MM DESKS SUPPORT SURFACE 2 X 850 X 420 MM NUMBER OF T-SLOTS 3 TABLE LOAD 500 KG SPINDLE SPEED RANGE 30-6,000 RPM A40ANTRIEBSLEISTUNG S6 PERFORMANCE 16.25 KWMAX. TORQUE 102 NM CUTTING POWER S6 MILLING ST 50375 CM3BOHREN ST 50Ã? 35 MM THREAD M24 FEEDS: CONTINUOUSLY VARIABLE X, Y, 30 / 30 / 30 M / MINMAX. VORSCHUBKRAFT7. 000 N
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-dimension 1060 x 620 x 850  mm, \r\ninclude basin 1000 x 500 x 400 mm DIMENSION 1060 X 620 X 850 MM, \R\NINCLUDE BASIN 1000 X 500 X 400 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hedelius machining centre cb 60 3-axis machine with 4 axes control - built in 1999
numerical control heidenhain tnc 426
22.0 kw main spindle drive 30-6000 min-1
november 2018 usage new spindle
30-fach tool magazine iso 40
fixed machine table
traverse paths: x axis: 2100 mm
y-axis: 620 mm
z-axis: 520 mm
reciprocating motion: 800 x 620 mm
spindle > < table: 140-660 mm
operation handset 410/426/430
spindle speed 8000
torque 50-100
scratch band promotion 60 x 2100
internal coolant supply / ikz
-central coolant supply through the work spindle
-complete with separately-standing band filter system & additional
duplex filter
pistols abblas
working space partition 60
 HEDELIUS MACHINING CENTRE CB 60 3-AXIS MACHINE WITH 4 AXES CONTROL - BUILT IN 1999 NUMERICAL CONTROL HEIDENHAIN TNC 426 22.0 KW MAIN SPINDLE DRIVE 30-6000 MIN-1 NOVEMBER 2018 USAGE NEW SPINDLE 30-FACH TOOL MAGAZINE ISO 40 FIXED MACHINE TABLE TRAVERSE PATHS: X AXIS: 2100 MM Y-AXIS: 620 MM Z-AXIS: 520 MM RECIPROCATING MOTION: 800 X 620 MM SPINDLE > < TABLE: 140-660 MM OPERATION HANDSET 410/426/430 SPINDLE SPEED 8000 TORQUE 50-100 SCRATCH BAND PROMOTION 60 X 2100 INTERNAL COOLANT SUPPLY / IKZ -CENTRAL COOLANT SUPPLY THROUGH THE WORK SPINDLE -COMPLETE WITH SEPARATELY-STANDING BAND FILTER SYSTEM & ADDITIONAL DUPLEX FILTER PISTOLS ABBLAS WORKING SPACE PARTITION 60
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-dimension: d 560 mm, w 360 mm, h 500 mm\r\ntotal height 610 mm DIMENSION: D 560 MM, W 360 MM, H 500 MM\R\NTOTAL HEIGHT 610 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-vertical milling machining center

manufacturer: hedelius
type designation: rs80 klm 5-axis vertical milling machining center
year of construction: 2005
tools: 56
spindle speed: 12000 1/min
stroke x: 1825 mm
stroke y: 800
stroke z: 600
round table 2.seite: d800mm panning
machine: ca 34759 h
spindle run time: ca 14676 h
special features:-tool laser measurement
	       -3d probe system
	       -round table 50 mm lowered for vb zero point clamping system

the machine is in operation and is available from end of june 2019 for sale. 

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 


 VERTICAL MILLING MACHINING CENTER MANUFACTURER: HEDELIUS TYPE DESIGNATION: RS80 KLM 5-AXIS VERTICAL MILLING MACHINING CENTER YEAR OF CONSTRUCTION: 2005 TOOLS: 56 SPINDLE SPEED: 12000 1/MIN STROKE X: 1825 MM STROKE Y: 800 STROKE Z: 600 ROUND TABLE 2.SEITE: D800MM PANNING MACHINE: CA 34759 H SPINDLE RUN TIME: CA 14676 H SPECIAL FEATURES:-TOOL LASER MEASUREMENT -3D PROBE SYSTEM -ROUND TABLE 50 MM LOWERED FOR VB ZERO POINT CLAMPING SYSTEM THE MACHINE IS IN OPERATION AND IS AVAILABLE FROM END OF JUNE 2019 FOR SALE. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-dimension: d 1000 mm, w 650 mm, h 800 mm\r\ntotal height 980 mm\r\n DIMENSION: D 1000 MM, W 650 MM, H 800 MM\R\NTOTAL HEIGHT 980 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-machining center manufacturer: hedelius type: rs505 with automation of indunorm
control: heidenhain itnc530
year of construction: 2011
hours of operation and more information see pictures in the annex.
machine is fully functional and can be tested under power. 


contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 

 MACHINING CENTER MANUFACTURER: HEDELIUS TYPE: RS505 WITH AUTOMATION OF INDUNORM CONTROL: HEIDENHAIN ITNC530 YEAR OF CONSTRUCTION: 2011 HOURS OF OPERATION AND MORE INFORMATION SEE PICTURES IN THE ANNEX. MACHINE IS FULLY FUNCTIONAL AND CAN BE TESTED UNDER POWER. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 230 €
Ubicación: Land-plastic rollers for ring bender pipe bender profile bending machine

inner diameter 50mm
nut 14mm
outer furrows knife 165 mm

or

diameter 30mm
nut 8mm
outer furrows knife 135 mm

or

internal diameter 35mm
nut 10mm
outer furrows knife 135 mm

42, 4 mm tubes 33, 7mm, or various other sizes available
20mm 25mm 30mm 40mm 45mm, etc. PLASTIC ROLLERS FOR RING BENDER PIPE BENDER PROFILE BENDING MACHINE INNER DIAMETER 50MM NUT 14MM OUTER FURROWS KNIFE 165 MM OR DIAMETER 30MM NUT 8MM OUTER FURROWS KNIFE 135 MM OR INTERNAL DIAMETER 35MM NUT 10MM OUTER FURROWS KNIFE 135 MM 42, 4 MM TUBES 33, 7MM, OR VARIOUS OTHER SIZES AVAILABLE 20MM 25MM 30MM 40MM 45MM, ETC.
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-dimension w 565 x d 460 x h 350  mm, \r\ninclude basin w 500 x d 400 x h 210 mm, \r\n DIMENSION W 565 X D 460 X H 350 MM, \R\NINCLUDE BASIN W 500 X D 400 X H 210 MM, \R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used kitagawa roundtable mrm 320
control mac mini ih (m-code enabled)

faceplate diameter mm 320
max. spindle passage mm 105
center height 225 mm
max. speed min-1 25
weight kg 135 

useable for mazak - dmg - hermle - hedelius - spinner machines USED KITAGAWA ROUNDTABLE MRM 320 CONTROL MAC MINI IH (M-CODE ENABLED) FACEPLATE DIAMETER MM 320 MAX. SPINDLE PASSAGE MM 105 CENTER HEIGHT 225 MM MAX. SPEED MIN-1 25 WEIGHT KG 135 USEABLE FOR MAZAK - DMG - HERMLE - HEDELIUS - SPINNER MACHINES
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land- type w 240 a, o.k. for max. 240 kg dough, \r\nbowl drive with rubber wheel,\r\n TYPE W 240 A, O.K. FOR MAX. 240 KG DOUGH, \R\NBOWL DRIVE WITH RUBBER WHEEL,\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 1.500 €
Ubicación: Land-riedel sc 31.2 RIEDEL SC 31.2
Vendedor: Firma Gomez
Año de construcción: usado
Ubicación: Land-dimension: inside    w 500 x d 400 x h 140 mm\r\n                    outside  w 600 x  d 500 x h  280 mm \r\ncap. approx. 200  donuts/h\r\naccessories: 1 lid, 1dropping plate\r\n                       2 dropping screens, DIMENSION: INSIDE W 500 X D 400 X H 140 MM\R\N OUTSIDE W 600 X D 500 X H 280 MM \R\NCAP. APPROX. 200 DONUTS/H\R\NACCESSORIES: 1 LID, 1DROPPING PLATE\R\N 2 DROPPING SCREENS,
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-servex sb kã¼hlthekeedelstahl approx. 270 cm breitgebrauchtschã¶ne well-preserved sb refrigerated counter from stainless steel and plexiglas3 floors with 18 valves to open after top rear 4 sliding windows to the bestã¼ckenauf the left side below stainless steel tray with drain for flaschendarã¼ber 2 glass plates approximately 120 x 40 cm (b x t) the height of individual disciplines is seen from bottom to top: approx 38 cm; about 2 x 15 cmauf the right side from the bottom after seen above: approx. 21 cm, 18 cm and 15 cmauf of the right side 3 glass plates of approx. 58 x. 40 cm (b x t) below storage space, right refrigeration unit front tray approx. 34 cm width right: approx. 200 cm wide shelf in about 82 cm of height left: approx. 34 cm wide shelf in about 57 cm hã¶heabmessungen: width. about 272 cmtiefe: approx. 80 cmtiefe with tray: approx. 109 cmhight: approx. 160 cm  SERVEX SB KüHLTHEKEEDELSTAHL APPROX. 270 CM BREITGEBRAUCHTSCHöNE WELL-PRESERVED SB REFRIGERATED COUNTER FROM STAINLESS STEEL AND PLEXIGLAS3 FLOORS WITH 18 VALVES TO OPEN AFTER TOP REAR 4 SLIDING WINDOWS TO THE BESTüCKENAUF THE LEFT SIDE BELOW STAINLESS STEEL TRAY WITH DRAIN FOR FLASCHENDARüBER 2 GLASS PLATES APPROXIMATELY 120 X 40 CM (B X T) THE HEIGHT OF INDIVIDUAL DISCIPLINES IS SEEN FROM BOTTOM TO TOP: APPROX 38 CM; ABOUT 2 X 15 CMAUF THE RIGHT SIDE FROM THE BOTTOM AFTER SEEN ABOVE: APPROX. 21 CM, 18 CM AND 15 CMAUF OF THE RIGHT SIDE 3 GLASS PLATES OF APPROX. 58 X. 40 CM (B X T) BELOW STORAGE SPACE, RIGHT REFRIGERATION UNIT FRONT TRAY APPROX. 34 CM WIDTH RIGHT: APPROX. 200 CM WIDE SHELF IN ABOUT 82 CM OF HEIGHT LEFT: APPROX. 34 CM WIDE SHELF IN ABOUT 57 CM HöHEABMESSUNGEN: WIDTH. ABOUT 272 CMTIEFE: APPROX. 80 CMTIEFE WITH TRAY: APPROX. 109 CMHIGHT: APPROX. 160 CM
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Ubicación: Land-width/deepness 650, 12 supports\r\ndistance between the supports height 130 mm, length  1980 mm\r\ntotal:  length 2050 mm, height 1880 mm, width 650 mm WIDTH/DEEPNESS 650, 12 SUPPORTS\R\NDISTANCE BETWEEN THE SUPPORTS HEIGHT 130 MM, LENGTH 1980 MM\R\NTOTAL: LENGTH 2050 MM, HEIGHT 1880 MM, WIDTH 650 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-fritsch roll fix dough sheeter approximately 290 cm

used

professional dough sheeter on rolling
edelstahlcorpus
suitable for extra thin dough like yufka - or puff
flour shakers 2 dough catch plates made of stainless steel
2 foot pedals
band width: 60 cm
band length right: 142 cm
band length left: approx. 140 cm
dough thickness from 0 to 30 mm
380 v
 
the machine is cleaned and tested for function.

dimensions:
width: 290 cm
depth: 118 cm
height: 114 cm

dimensions bands: left: length: approx. 140 cm
right length: 142 cm
width: 60 cm

delivery or pick up 10 days after checkout.
 FRITSCH ROLL FIX DOUGH SHEETER APPROXIMATELY 290 CM USED PROFESSIONAL DOUGH SHEETER ON ROLLING EDELSTAHLCORPUS SUITABLE FOR EXTRA THIN DOUGH LIKE YUFKA - OR PUFF FLOUR SHAKERS 2 DOUGH CATCH PLATES MADE OF STAINLESS STEEL 2 FOOT PEDALS BAND WIDTH: 60 CM BAND LENGTH RIGHT: 142 CM BAND LENGTH LEFT: APPROX. 140 CM DOUGH THICKNESS FROM 0 TO 30 MM 380 V THE MACHINE IS CLEANED AND TESTED FOR FUNCTION. DIMENSIONS: WIDTH: 290 CM DEPTH: 118 CM HEIGHT: 114 CM DIMENSIONS BANDS: LEFT: LENGTH: APPROX. 140 CM RIGHT LENGTH: 142 CM WIDTH: 60 CM DELIVERY OR PICK UP 10 DAYS AFTER CHECKOUT.
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Ubicación: Land-machine was used for mixing marmelade with water\r\n1. measuring probe: filling height marmelade \r\n2..measuring probe: filling height water\r\n\r\noperation\r\nfill tank with marmelade up to the 1. measuring probe then\r\nfill tank with water up to the 2. measuring probe, pump \r\ndelivers product in circulation until mixture is ready MACHINE WAS USED FOR MIXING MARMELADE WITH WATER\R\N1. MEASURING PROBE: FILLING HEIGHT MARMELADE \R\N2..MEASURING PROBE: FILLING HEIGHT WATER\R\N\R\NOPERATION\R\NFILL TANK WITH MARMELADE UP TO THE 1. MEASURING PROBE THEN\R\NFILL TANK WITH WATER UP TO THE 2. MEASURING PROBE, PUMP \R\NDELIVERS PRODUCT IN CIRCULATION UNTIL MIXTURE IS READY
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-abzugahaube / ceiling dome edelstahlca. 600 cm breitg ebraucht komplett cleaned well preserved abzugshaube durch the design it is an exceptional model, giving for each use enrichment bringt.in of the middle square trigger hole approx. 90 x 90 cm.zum range include the matching 22 fettfiltereinsätze.abmessungen: width: approx. 600 cmtiefe: approx. 140 cmhight: approx. 115 cm size grease filters: width: approx. 30 cmtiefe: 50 cmhöhe: approx. 5 cmdie hood is in our cologne lager.besichtigung before buying is desired. due to space work before the start of the tour, we ask for terminabsprache.lieferung or pick up 10 days after checkout.   ABZUGAHAUBE / CEILING DOME EDELSTAHLCA. 600 CM BREITG EBRAUCHT KOMPLETT CLEANED WELL PRESERVED ABZUGSHAUBE DURCH THE DESIGN IT IS AN EXCEPTIONAL MODEL, GIVING FOR EACH USE ENRICHMENT BRINGT.IN OF THE MIDDLE SQUARE TRIGGER HOLE APPROX. 90 X 90 CM.ZUM RANGE INCLUDE THE MATCHING 22 FETTFILTEREINSäTZE.ABMESSUNGEN: WIDTH: APPROX. 600 CMTIEFE: APPROX. 140 CMHIGHT: APPROX. 115 CM SIZE GREASE FILTERS: WIDTH: APPROX. 30 CMTIEFE: 50 CMHöHE: APPROX. 5 CMDIE HOOD IS IN OUR COLOGNE LAGER.BESICHTIGUNG BEFORE BUYING IS DESIRED. DUE TO SPACE WORK BEFORE THE START OF THE TOUR, WE ASK FOR TERMINABSPRACHE.LIEFERUNG OR PICK UP 10 DAYS AFTER CHECKOUT.
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Ubicación: Land-type 26 m, moon shaped blade, \r\ntablemodel, thickness adjustable approx. 2 - 18 mm\r\ndimensions: \r\nbread           l       400 mm, w  170 mm, h   150 mm\r\nmachine       l    1.600 mm, w  600 mm, h   600 mm TYPE 26 M, MOON SHAPED BLADE, \R\NTABLEMODEL, THICKNESS ADJUSTABLE APPROX. 2 - 18 MM\R\NDIMENSIONS: \R\NBREAD L 400 MM, W 170 MM, H 150 MM\R\NMACHINE L 1.600 MM, W 600 MM, H 600 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-data on the machine

type of machine: hole punch
manufacturer: noble
model: punching master 404
year of construction: 1992
condition: ready to use (used)

site
warstein, germany

reference number
m-ede-0219

description
we offer you a used punching by the manufacturer noble

cutting force 40 t
performance in steel
100mm diameter to 3, 0 mm
24mm diameter to 12, 0 mm

weight 1, 5 t ca,

machine available from kw9

our offer is aimed at commercial persons covered in the sense of the gewerbeordnung gewo according to ⧠14.
the offer is subject to change reserved, sale. please enter your full contact details to get a quote with our terms and conditions and terms of payment. mistakes in the descriptions and offerings are subject to change! DATA ON THE MACHINE TYPE OF MACHINE: HOLE PUNCH MANUFACTURER: NOBLE MODEL: PUNCHING MASTER 404 YEAR OF CONSTRUCTION: 1992 CONDITION: READY TO USE (USED) SITE WARSTEIN, GERMANY REFERENCE NUMBER M-EDE-0219 DESCRIPTION WE OFFER YOU A USED PUNCHING BY THE MANUFACTURER NOBLE CUTTING FORCE 40 T PERFORMANCE IN STEEL 100MM DIAMETER TO 3, 0 MM 24MM DIAMETER TO 12, 0 MM WEIGHT 1, 5 T CA, MACHINE AVAILABLE FROM KW9 OUR OFFER IS AIMED AT COMMERCIAL PERSONS COVERED IN THE SENSE OF THE GEWERBEORDNUNG GEWO ACCORDING TO § 14. THE OFFER IS SUBJECT TO CHANGE RESERVED, SALE. PLEASE ENTER YOUR FULL CONTACT DETAILS TO GET A QUOTE WITH OUR TERMS AND CONDITIONS AND TERMS OF PAYMENT. MISTAKES IN THE DESCRIPTIONS AND OFFERINGS ARE SUBJECT TO CHANGE!
Vendedor: Maschinenhandel-Reuss GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-width/deepness 640, 10 supports\r\ndistance between the supports height 150 mm, length  1930 mm\r\ntotal:  length 2010 mm, height 1765 mm, width 640 mm WIDTH/DEEPNESS 640, 10 SUPPORTS\R\NDISTANCE BETWEEN THE SUPPORTS HEIGHT 150 MM, LENGTH 1930 MM\R\NTOTAL: LENGTH 2010 MM, HEIGHT 1765 MM, WIDTH 640 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-drucklstg.: 40 to.
punch: 24 mm dia. 12 mm st
38 mm diameter. in 8 mm st
105 mm diameter. 3 mm st
total power: 2,2 kw / 380 v
machine weight: 1300 kg

equipment / accessories:

tool quick-change system
el. / pneumat. clutch
material stop
material requirements
tool cabinet incl. punch, matrices etc.
machine lamp
foot switch

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the hole punch in advance in our factory under power.
 DRUCKLSTG.: 40 TO. PUNCH: 24 MM DIA. 12 MM ST 38 MM DIAMETER. IN 8 MM ST 105 MM DIAMETER. 3 MM ST TOTAL POWER: 2,2 KW / 380 V MACHINE WEIGHT: 1300 KG EQUIPMENT / ACCESSORIES: TOOL QUICK-CHANGE SYSTEM EL. / PNEUMAT. CLUTCH MATERIAL STOP MATERIAL REQUIREMENTS TOOL CABINET INCL. PUNCH, MATRICES ETC. MACHINE LAMP FOOT SWITCH ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE HOLE PUNCH IN ADVANCE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-belt width 500 mm, length 3000 mm\r\nvariable speed\r\n BELT WIDTH 500 MM, LENGTH 3000 MM\R\NVARIABLE SPEED\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-vacuum dryer isve type es 6 
new machine, 24 months guarantee of the manufacturer 

construction in carbon-steel or stainless-steel 
6m³ loading volume 
21,5 kw 
dimensions of the drying kiln: 
diemater 1,60 m 
length 6,90 m 
length incl. rails 13,00 m 
total weight 2.900 kg 

dimensions inside / possible wood dimensions 
6000 x 1100 x 990 mm (lwh) 

plc control system siemens type s7 – 1200 

vacuum pump becker 
100 mc/h 
2,2 kw 
380 vca 
 

new plant, 24 months guarantee of manufacturer 
delivery exw, delivery time approx. 90 days from purchase order
 VACUUM DRYER ISVE TYPE ES 6 NEW MACHINE, 24 MONTHS GUARANTEE OF THE MANUFACTURER CONSTRUCTION IN CARBON-STEEL OR STAINLESS-STEEL 6M³ LOADING VOLUME 21,5 KW DIMENSIONS OF THE DRYING KILN: DIEMATER 1,60 M LENGTH 6,90 M LENGTH INCL. RAILS 13,00 M TOTAL WEIGHT 2.900 KG DIMENSIONS INSIDE / POSSIBLE WOOD DIMENSIONS 6000 X 1100 X 990 MM (LWH) PLC CONTROL SYSTEM SIEMENS TYPE S7 – 1200 VACUUM PUMP BECKER 100 MC/H 2,2 KW 380 VCA NEW PLANT, 24 MONTHS GUARANTEE OF MANUFACTURER DELIVERY EXW, DELIVERY TIME APPROX. 90 DAYS FROM PURCHASE ORDER
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-was overhauled in 2017, received dguv check in 2018, including accessories, tools and documentation.  WAS OVERHAULED IN 2017, RECEIVED DGUV CHECK IN 2018, INCLUDING ACCESSORIES, TOOLS AND DOCUMENTATION.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-moveable, dimensions boxes: 60 x 80 cm, dimensions rack: 62 x 83 x 180 cm\r\n MOVEABLE, DIMENSIONS BOXES: 60 X 80 CM, DIMENSIONS RACK: 62 X 83 X 180 CM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 3.500 €
Ubicación: Land--collating and binding machine for single sheets edelmann form collect
-year 1984 , seven stations
-sheet size max: 38×46 cm - min: 8×13 cm. 
-for business forms, calendars, books, writing blocks, etc.
-equipped with numbering unit
-jogger, air pump, all accessories -COLLATING AND BINDING MACHINE FOR SINGLE SHEETS EDELMANN FORM COLLECT -YEAR 1984 , SEVEN STATIONS -SHEET SIZE MAX: 38×46 CM - MIN: 8×13 CM. -FOR BUSINESS FORMS, CALENDARS, BOOKS, WRITING BLOCKS, ETC. -EQUIPPED WITH NUMBERING UNIT -JOGGER, AIR PUMP, ALL ACCESSORIES
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-alexanderwerk 20 liter wurstfã¼lleredelstahlgehã¤use3 tã¼llenersatzdichtungenkolbenschlã¼sselkolbengeschwindigkeit einstellbarkolben retracts automatically and stops machine when piston is below istordentlicher and quiet laufmaschine before use thoroughly reinigevideo test run and more pictures available  ALEXANDERWERK 20 LITER WURSTFüLLEREDELSTAHLGEHäUSE3 TüLLENERSATZDICHTUNGENKOLBENSCHLüSSELKOLBENGESCHWINDIGKEIT EINSTELLBARKOLBEN RETRACTS AUTOMATICALLY AND STOPS MACHINE WHEN PISTON IS BELOW ISTORDENTLICHER AND QUIET LAUFMASCHINE BEFORE USE THOROUGHLY REINIGEVIDEO TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-filling of the funnel over foto-cell-control\r\napportionment from the streusel over the thorn roll\r\nvariable speed, working width 600 mm FILLING OF THE FUNNEL OVER FOTO-CELL-CONTROL\R\NAPPORTIONMENT FROM THE STREUSEL OVER THE THORN ROLL\R\NVARIABLE SPEED, WORKING WIDTH 600 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-man roland rekord 2/2
size 70 x 100
year 1986
rci 1
quick attack
rolandmatic
cooling edelmann
powder sprayer MAN ROLAND REKORD 2/2 SIZE 70 X 100 YEAR 1986 RCI 1 QUICK ATTACK ROLANDMATIC COOLING EDELMANN POWDER SPRAYER
Vendedor: C&L INTERNATIONAL LTD
Año de construcción: usado
Ubicación: Land-equipment: input table\r\n                  task by pretzel cloth \r\n                  continuous-glazing\r\n                   run out table + depositing on a plates 580 x 780 mm\r\n EQUIPMENT: INPUT TABLE\R\N TASK BY PRETZEL CLOTH \R\N CONTINUOUS-GLAZING\R\N RUN OUT TABLE + DEPOSITING ON A PLATES 580 X 780 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-hours :	
laser on: 70065 h	
beam on: 53151 h	
control system :	
bosch cc220	
table dimensions: 2500 x 1250 mm	
laser power: 2600 w	
2 pallets	
network: 65 kva 125 a	
max. sheet thickness :	
structural steel: 12 mm	
stainless steel: 4 mm	
aluminum: 3 mm	
machine dimensions :	
8900 x 6500 x 2000 mm	
machine weight: 6100 kg	
repairs year 2000:	
cooling exchange at riedel npp	
conversion of high-frequency transistor to generator	
year 2002 :	
resonatoraustauch	
state:	
60% limited functional capacity HOURS : LASER ON: 70065 H BEAM ON: 53151 H CONTROL SYSTEM : BOSCH CC220 TABLE DIMENSIONS: 2500 X 1250 MM LASER POWER: 2600 W 2 PALLETS NETWORK: 65 KVA 125 A MAX. SHEET THICKNESS : STRUCTURAL STEEL: 12 MM STAINLESS STEEL: 4 MM ALUMINUM: 3 MM MACHINE DIMENSIONS : 8900 X 6500 X 2000 MM MACHINE WEIGHT: 6100 KG REPAIRS YEAR 2000: COOLING EXCHANGE AT RIEDEL NPP CONVERSION OF HIGH-FREQUENCY TRANSISTOR TO GENERATOR YEAR 2002 : RESONATORAUSTAUCH STATE: 60% LIMITED FUNCTIONAL CAPACITY
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-variable cooling temp. , for plates 600 x 800 mm\r\n19 supports for plates, adjustable\r\ndimensions outside: d 1000, w 820, h 2260 mm VARIABLE COOLING TEMP. , FOR PLATES 600 X 800 MM\R\N19 SUPPORTS FOR PLATES, ADJUSTABLE\R\NDIMENSIONS OUTSIDE: D 1000, W 820, H 2260 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 65.000 €
Ubicación: Land-in the spring of 2019, a 10 is free hl stainless steel brewhouse from brewery with the following system components:
-malt mill 100 kg / h with malztransport
-3-units brewhouse, steam heated, with 10 hl cast wort, mash tun, lauter tun and wort kettle, drives from the top, vessels standing on 4 feet, not automated, 1997.
-whirlpool, 10 hl, 1997.
-wort cooler, spirax, 2-stage, built on framework
-ice water chiller
  IN THE SPRING OF 2019, A 10 IS FREE HL STAINLESS STEEL BREWHOUSE FROM BREWERY WITH THE FOLLOWING SYSTEM COMPONENTS: -MALT MILL 100 KG / H WITH MALZTRANSPORT -3-UNITS BREWHOUSE, STEAM HEATED, WITH 10 HL CAST WORT, MASH TUN, LAUTER TUN AND WORT KETTLE, DRIVES FROM THE TOP, VESSELS STANDING ON 4 FEET, NOT AUTOMATED, 1997. -WHIRLPOOL, 10 HL, 1997. -WORT COOLER, SPIRAX, 2-STAGE, BUILT ON FRAMEWORK -ICE WATER CHILLER
Vendedor: Hümmer GmbH
Año de construcción: usado
Ubicación: Land-chamfered up at the rear,\r\nwith supporting frame with panels on 3 sides.\r\nbelow basin d 535/400 / w 500/400, h 200mm\r\nupper basin d 335/280 / w 500/400, h 280mm\r\ndistance basin from the floor\r\nbelow 525 / upper 1060 mm\r\n CHAMFERED UP AT THE REAR,\R\NWITH SUPPORTING FRAME WITH PANELS ON 3 SIDES.\R\NBELOW BASIN D 535/400 / W 500/400, H 200MM\R\NUPPER BASIN D 335/280 / W 500/400, H 280MM\R\NDISTANCE BASIN FROM THE FLOOR\R\NBELOW 525 / UPPER 1060 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-used stainless steel transport containers / pressure vessels

last purpose: unknown

volume: 1000l
type: standing on four feet with forklifts tunnel
material (media contact): 1.4301 / aisi304
design: single-walled
floor: arched
top shelf: arched
working pressure according to the rating plate: + 0.2 bar

dimensions tank:

container diameter: 1000 mm
cyl. height: 1100mm
distance from drain to the ground: 200 mm
total height: 1900 mm

materials:

inside: 1.4301 / aisi 304 external: 1.4301 / aisi 304

facilities:

plate: yes
dome cover 㸠400 mm
diameter outlet: 50mm
outlet type: dn50 din11851
outlet valve: valve

USED STAINLESS STEEL TRANSPORT CONTAINERS / PRESSURE VESSELS LAST PURPOSE: UNKNOWN VOLUME: 1000L TYPE: STANDING ON FOUR FEET WITH FORKLIFTS TUNNEL MATERIAL (MEDIA CONTACT): 1.4301 / AISI304 DESIGN: SINGLE-WALLED FLOOR: ARCHED TOP SHELF: ARCHED WORKING PRESSURE ACCORDING TO THE RATING PLATE: + 0.2 BAR DIMENSIONS TANK: CONTAINER DIAMETER: 1000 MM CYL. HEIGHT: 1100MM DISTANCE FROM DRAIN TO THE GROUND: 200 MM TOTAL HEIGHT: 1900 MM MATERIALS: INSIDE: 1.4301 / AISI 304 EXTERNAL: 1.4301 / AISI 304 FACILITIES: PLATE: YES DOME COVER ø 400 MM DIAMETER OUTLET: 50MM OUTLET TYPE: DN50 DIN11851 OUTLET VALVE: VALVE
Vendedor: Inox Behälter GmbH
Año de construcción: usado
Ubicación: Land-10 supports , distance height 140\r\ntotal dimensions: l  1250 mm, w 520 mm, h 1610 mm\r\ngood condition 10 SUPPORTS , DISTANCE HEIGHT 140\R\NTOTAL DIMENSIONS: L 1250 MM, W 520 MM, H 1610 MM\R\NGOOD CONDITION
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land- 2 with each ca 1000 l   2 WITH EACH CA 1000 L  
Vendedor: Brauereiservice Uwe Metzler
Año de construcción: usado
Ubicación: Land-type ft 350/700  belt: width 650 mm\r\ntable: lenght 3600 mm, width 700 mm\r\naccessories:1 triangle cutter,3 rows, h 180 , w 160 mm  \r\n                  1 cutting cylinders, longitudianal\r\n                     cutting,  3 stripes 180 mm \r\ncondition as it is TYPE FT 350/700 BELT: WIDTH 650 MM\R\NTABLE: LENGHT 3600 MM, WIDTH 700 MM\R\NACCESSORIES:1 TRIANGLE CUTTER,3 ROWS, H 180 , W 160 MM \R\N 1 CUTTING CYLINDERS, LONGITUDIANAL\R\N CUTTING, 3 STRIPES 180 MM \R\NCONDITION AS IT IS
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more EDEL types: