33 ofertas

Año de construcción: usado
Ubicación: Land-technical data:
	 
-saw blade diameter 420 mm
-blade hole 30 mm
-max cutting length 6000 mm
-smallest cutting length 90â° + 45 â° 335 mm
-see diagram below cutting area
-swivel range to inside pneumatic 90-22.5 â° - tilt range inside pneumatically 90 - 45 â°
-blade rotation speed 2800 rpm
-drive: 400 v / 2 x 4000 watts
-compressed air supply 7 bar
-air consumption per work cycle - no spray approx.	    	    40 l
						-with spray approx.	    64 l
	-space requirement approx.	   	  b h 7500 x 1600 x 1600 mm
-weight approx.						1800 kg
-by: - cutting-length adjustment with position control - saw unit swivel and tilt for high and wide profiles,.
			-as well as miter cuts possible, 22.5 â° to the inside pivot, - a separate electrical cabinet, - oil lubrication
 TECHNICAL DATA: -SAW BLADE DIAMETER 420 MM -BLADE HOLE 30 MM -MAX CUTTING LENGTH 6000 MM -SMALLEST CUTTING LENGTH 90° + 45 ° 335 MM -SEE DIAGRAM BELOW CUTTING AREA -SWIVEL RANGE TO INSIDE PNEUMATIC 90-22.5 ° - TILT RANGE INSIDE PNEUMATICALLY 90 - 45 ° -BLADE ROTATION SPEED 2800 RPM -DRIVE: 400 V / 2 X 4000 WATTS -COMPRESSED AIR SUPPLY 7 BAR -AIR CONSUMPTION PER WORK CYCLE - NO SPRAY APPROX. 40 L -WITH SPRAY APPROX. 64 L -SPACE REQUIREMENT APPROX. B H 7500 X 1600 X 1600 MM -WEIGHT APPROX. 1800 KG -BY: - CUTTING-LENGTH ADJUSTMENT WITH POSITION CONTROL - SAW UNIT SWIVEL AND TILT FOR HIGH AND WIDE PROFILES,. -AS WELL AS MITER CUTS POSSIBLE, 22.5 ° TO THE INSIDE PIVOT, - A SEPARATE ELECTRICAL CABINET, - OIL LUBRICATION
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-weight approx.: 360 kg<br/>dimensions (l x w x h) approx.: 980 x 1250 x 1610 mm<br/>description: <b>3-spindle copy router for aluminium<br> serial number: 1780021507<br> top group:<br> milling area on abutments and copying template 340 x 100 mm<br> stroke 110 mm<br> group low:<br> milling area on abutments and copying template 240 x 85 mm<br> front stroke 95 mm rear stroke 45 mm<br> spindle speed: 12000 rpm<br> cutting area of profiles: 115 x 100 mm<br> electrical connection 230 / 400v<br> 50hz<br> engine power: 0.74kw<br> 7 bar compressed air connection<br> air consumption per cycle: 12 l without spraying<br> 24 l with spraying. </b> WEIGHT APPROX.: 360 KG
DIMENSIONS (L X W X H) APPROX.: 980 X 1250 X 1610 MM
DESCRIPTION: 3-SPINDLE COPY ROUTER FOR ALUMINIUM
SERIAL NUMBER: 1780021507
TOP GROUP:
MILLING AREA ON ABUTMENTS AND COPYING TEMPLATE 340 X 100 MM
STROKE 110 MM
GROUP LOW:
MILLING AREA ON ABUTMENTS AND COPYING TEMPLATE 240 X 85 MM
FRONT STROKE 95 MM REAR STROKE 45 MM
SPINDLE SPEED: 12000 RPM
CUTTING AREA OF PROFILES: 115 X 100 MM
ELECTRICAL CONNECTION 230 / 400V
50HZ
ENGINE POWER: 0.74KW
7 BAR COMPRESSED AIR CONNECTION
AIR CONSUMPTION PER CYCLE: 12 L WITHOUT SPRAYING
24 L WITH SPRAYING.
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 72.000 €
Ubicación: Land-maximum processing length: 6400 mm
stroke y-axis: 850 mm
z axis travel: 650 mm
a-axis swivel angle: 0 â°-180 â°
maximum spindle speed: 24,000 u / min
tool changer with 8 seats
automatic clamp movement
see photo tools
windows operating system
2 separate clamping circuits with light barriers to work in shuttle mode
only about 1400 hours of spindle
 MAXIMUM PROCESSING LENGTH: 6400 MM STROKE Y-AXIS: 850 MM Z AXIS TRAVEL: 650 MM A-AXIS SWIVEL ANGLE: 0 &ACIRC;&DEG;-180 &ACIRC;&DEG; MAXIMUM SPINDLE SPEED: 24,000 U / MIN TOOL CHANGER WITH 8 SEATS AUTOMATIC CLAMP MOVEMENT SEE PHOTO TOOLS WINDOWS OPERATING SYSTEM 2 SEPARATE CLAMPING CIRCUITS WITH LIGHT BARRIERS TO WORK IN SHUTTLE MODE ONLY ABOUT 1400 HOURS OF SPINDLE
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-provide here a little used elumatec dg 79 + e111 map. bj. 2012

description:
solid cast iron construction ensures a flawless profile support for accurate angle cutting with integrated rotary table
swivelling range of the saw heads from 0 â° to 45 â° adjustable left and right adjustable. this foreign and innenmaã?zuschnitte possible
vertical and horizontal pneumatic material clamping devices ensure optimum fixation of profile
standard saw blades
standard with digital display e 111
dosiersprueheinrichtung
 
technical data:
smallest cutting length at 90 â° 520 mm
smallest cutting length at 45 â° tilted 520 mm
locking points at 15 â°, 30â°, and 45â°
swivel range of 0 â° to 45 â° adjustable
hydropneumatic saw feed
see cutting diagram section
saw blade diameter 380 mm
blade speed 2.800 1/min.
electrical connection 230/400 v, 3 ~, 50 hz
each motor 3 kw power output
compressed air supply 7 bar PROVIDE HERE A LITTLE USED ELUMATEC DG 79 + E111 MAP. BJ. 2012 DESCRIPTION: SOLID CAST IRON CONSTRUCTION ENSURES A FLAWLESS PROFILE SUPPORT FOR ACCURATE ANGLE CUTTING WITH INTEGRATED ROTARY TABLE SWIVELLING RANGE OF THE SAW HEADS FROM 0 &ACIRC;&DEG; TO 45 &ACIRC;&DEG; ADJUSTABLE LEFT AND RIGHT ADJUSTABLE. THIS FOREIGN AND INNENMA&ATILDE;?ZUSCHNITTE POSSIBLE VERTICAL AND HORIZONTAL PNEUMATIC MATERIAL CLAMPING DEVICES ENSURE OPTIMUM FIXATION OF PROFILE STANDARD SAW BLADES STANDARD WITH DIGITAL DISPLAY E 111 DOSIERSPRUEHEINRICHTUNG TECHNICAL DATA: SMALLEST CUTTING LENGTH AT 90 &ACIRC;&DEG; 520 MM SMALLEST CUTTING LENGTH AT 45 &ACIRC;&DEG; TILTED 520 MM LOCKING POINTS AT 15 &ACIRC;&DEG;, 30&ACIRC;&DEG;, AND 45&ACIRC;&DEG; SWIVEL RANGE OF 0 &ACIRC;&DEG; TO 45 &ACIRC;&DEG; ADJUSTABLE HYDROPNEUMATIC SAW FEED SEE CUTTING DIAGRAM SECTION SAW BLADE DIAMETER 380 MM BLADE SPEED 2.800 1/MIN. ELECTRICAL CONNECTION 230/400 V, 3 ~, 50 HZ EACH MOTOR 3 KW POWER OUTPUT COMPRESSED AIR SUPPLY 7 BAR
Vendedor: Herr Michael Posch
Año de construcción: usado
Precio: 2.150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-water slot-milling cutter elumatec ws 132 

used, good condition 
electro pneumatically 
4 aggregates 
milling behind – milling down – milling left – milling right 
separately connectible 
longitudinal strokes steppless adjustable 
control by food pedal 

used machines without guarantee. 
delivery conditions ex stock in 73433 aalen, germany. 
subject to prior sale. 
 WATER SLOT-MILLING CUTTER ELUMATEC WS 132 USED, GOOD CONDITION ELECTRO PNEUMATICALLY 4 AGGREGATES MILLING BEHIND – MILLING DOWN – MILLING LEFT – MILLING RIGHT SEPARATELY CONNECTIBLE LONGITUDINAL STROKES STEPPLESS ADJUSTABLE CONTROL BY FOOD PEDAL USED MACHINES WITHOUT GUARANTEE. DELIVERY CONDITIONS EX STOCK IN 73433 AALEN, GERMANY. SUBJECT TO PRIOR SALE.
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer elumatec type mgs 142
overhaul year: 2019
year of construction: 1995-2018
blade max carbide: 500 mm
power saw motor: 4 kw
speed saw motor: 2800 min-1
cutting speed blade 500 mm: 4400 m / min
saw height control: continuously variable, electronically
workspace vierkant90 â° max: 130 x 130 mm flat workspace: 90â° max: 190 x 130 mm work area round: 90 â° max: 150 mm pneumatic supply length: 5-560, 10-1120 mm
compressed air connection, by the customer 6 bar
gewicht(sã¤ge)ca.: 800 kg
dimensions lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint lxw: 2900 mm x 1400 mm additional description elumatec sa 142 4kw straight cutting retrofit

elumatec sa 142 4kw straight cutting retrofit
fully automatic saw machines for non-ferrous metal and plastic

the machine is both technically and optically after completed retrofit in mint condition. 

the machine will be overhauled on request in our house. among others were renewed following points:
-conversion to siemens s7 plc control
-conversion on siemens hmi control panel
-new electric components
-new pneumatic lines
-maintenance or replacement of all pneumatic cylinder and valve terminals
-maintenance minimum lubrication system
-replacing common wear parts
-overhaul of cabin

warranty:
we take for our systems, unless otherwise agreed, a guarantee of 6 months for all outdated by us or exchanged parts. working time, as well as wearing parts are excluded from the warranty. 

optional:
-extending the saw on a flat 90â° max: 300 x 120 mm
-gap extension (for a high-quality cutting surface without return tracks)
-feed rate servogesteuert
-saw blade feed servogesteuert
-dimensions fixture supply vice
-delivery and installation in your home - training your staff
 MANUFACTURER ELUMATEC TYPE MGS 142 OVERHAUL YEAR: 2019 YEAR OF CONSTRUCTION: 1995-2018 BLADE MAX CARBIDE: 500 MM POWER SAW MOTOR: 4 KW SPEED SAW MOTOR: 2800 MIN-1 CUTTING SPEED BLADE 500 MM: 4400 M / MIN SAW HEIGHT CONTROL: CONTINUOUSLY VARIABLE, ELECTRONICALLY WORKSPACE VIERKANT90 &ACIRC;&DEG; MAX: 130 X 130 MM FLAT WORKSPACE: 90&ACIRC;&DEG; MAX: 190 X 130 MM WORK AREA ROUND: 90 &ACIRC;&DEG; MAX: 150 MM PNEUMATIC SUPPLY LENGTH: 5-560, 10-1120 MM COMPRESSED AIR CONNECTION, BY THE CUSTOMER 6 BAR GEWICHT(S&ATILDE;&CURREN;GE)CA.: 800 KG DIMENSIONS LXWXH (SAW) ABOUT: 2900MM X 1400MM X 1500MM FOOTPRINT LXW: 2900 MM X 1400 MM ADDITIONAL DESCRIPTION ELUMATEC SA 142 4KW STRAIGHT CUTTING RETROFIT ELUMATEC SA 142 4KW STRAIGHT CUTTING RETROFIT FULLY AUTOMATIC SAW MACHINES FOR NON-FERROUS METAL AND PLASTIC THE MACHINE IS BOTH TECHNICALLY AND OPTICALLY AFTER COMPLETED RETROFIT IN MINT CONDITION. THE MACHINE WILL BE OVERHAULED ON REQUEST IN OUR HOUSE. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -CONVERSION TO SIEMENS S7 PLC CONTROL -CONVERSION ON SIEMENS HMI CONTROL PANEL -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -MAINTENANCE OR REPLACEMENT OF ALL PNEUMATIC CYLINDER AND VALVE TERMINALS -MAINTENANCE MINIMUM LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF CABIN WARRANTY: WE TAKE FOR OUR SYSTEMS, UNLESS OTHERWISE AGREED, A GUARANTEE OF 6 MONTHS FOR ALL OUTDATED BY US OR EXCHANGED PARTS. WORKING TIME, AS WELL AS WEARING PARTS ARE EXCLUDED FROM THE WARRANTY. OPTIONAL: -EXTENDING THE SAW ON A FLAT 90&ACIRC;&DEG; MAX: 300 X 120 MM -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) -FEED RATE SERVOGESTEUERT -SAW BLADE FEED SERVOGESTEUERT -DIMENSIONS FIXTURE SUPPLY VICE -DELIVERY AND INSTALLATION IN YOUR HOME - TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Precio: 1.950 €
Ubicación: Land-notching machine, notch milling machine, window construction <br /><br /> for milling fighter and base designs <br /> drilling of fixing holes in one operation <br /> -automatically infinitely variable feed <br /> milling head o 38 mm <br /> dimensions 2000/1100 / h1350 mm <br /> -weight 350 kg NOTCHING MACHINE, NOTCH MILLING MACHINE, WINDOW CONSTRUCTION

FOR MILLING FIGHTER AND BASE DESIGNS
DRILLING OF FIXING HOLES IN ONE OPERATION
-AUTOMATICALLY INFINITELY VARIABLE FEED
MILLING HEAD O 38 MM
DIMENSIONS 2000/1100 / H1350 MM
-WEIGHT 350 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 84.000 €
Ubicación: Land-maximum processing length: 4200 mm
stroke y-axis: 850 mm
z axis travel: 650 mm
a-axis swivel angle: 0 â°-180 â°
maximum spindle speed: 24,000 u / min
2 tool changer with 8 squares (1 driving with, 1 stationary)
automatic clamp movement
zentralschimerung
see photo tools
windows operating system
elusoft including dongle and cd available
safety light barrier
only 478 spindle hours MAXIMUM PROCESSING LENGTH: 4200 MM STROKE Y-AXIS: 850 MM Z AXIS TRAVEL: 650 MM A-AXIS SWIVEL ANGLE: 0 &ACIRC;&DEG;-180 &ACIRC;&DEG; MAXIMUM SPINDLE SPEED: 24,000 U / MIN 2 TOOL CHANGER WITH 8 SQUARES (1 DRIVING WITH, 1 STATIONARY) AUTOMATIC CLAMP MOVEMENT ZENTRALSCHIMERUNG SEE PHOTO TOOLS WINDOWS OPERATING SYSTEM ELUSOFT INCLUDING DONGLE AND CD AVAILABLE SAFETY LIGHT BARRIER ONLY 478 SPINDLE HOURS
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 230 mm<br/>y-travel: 90 mm<br/>turning speeds: 12.000 u/min<br/>stroke: 110 mm<br/>output: 0,74 kw<br/>weight of the machine ca.: 0,15 t<br/>dimensions of the machine ca.: 0,72x0,65x1,55 m<br/>only 15 working hours<br/><br/><br/><br/><br/> X-TRAVEL: 230 MM
Y-TRAVEL: 90 MM
TURNING SPEEDS: 12.000 U/MIN
STROKE: 110 MM
OUTPUT: 0,74 KW
WEIGHT OF THE MACHINE CA.: 0,15 T
DIMENSIONS OF THE MACHINE CA.: 0,72X0,65X1,55 M
ONLY 15 WORKING HOURS




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Precio: 71.000 €
Ubicación: Land-5 controlled axis traverse path x-axis: 6700 mm
stroke y-axis: 1000 mm
z axis travel: 650 mm
a-axis swivel angle: + /-110â° programmable in 1 / 10 â° steps
c-axis swivel angle: + /-180 â° freely programmable in 1 / 10 â° steps
drive speed: 22,000 u / min
8 clamps
automatic tensioner detection and positioning
hedging via light barriers
tool changer with 10 shots and a saw blade holder
a wide range of tool 5 CONTROLLED AXIS TRAVERSE PATH X-AXIS: 6700 MM STROKE Y-AXIS: 1000 MM Z AXIS TRAVEL: 650 MM A-AXIS SWIVEL ANGLE: + /-110&ACIRC;&DEG; PROGRAMMABLE IN 1 / 10 &ACIRC;&DEG; STEPS C-AXIS SWIVEL ANGLE: + /-180 &ACIRC;&DEG; FREELY PROGRAMMABLE IN 1 / 10 &ACIRC;&DEG; STEPS DRIVE SPEED: 22,000 U / MIN 8 CLAMPS AUTOMATIC TENSIONER DETECTION AND POSITIONING HEDGING VIA LIGHT BARRIERS TOOL CHANGER WITH 10 SHOTS AND A SAW BLADE HOLDER A WIDE RANGE OF TOOL
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-profile width: 150 mm<br/>max. depth of profile: 150 mm<br/>milling unit vertical: 100 x 290 mm<br/>: 70 x 270 mm<br/>stroke: 120 mm<br/>weight of the machine ca.: ca. 230 kg<br/><br/><br/><br/><br/> PROFILE WIDTH: 150 MM
MAX. DEPTH OF PROFILE: 150 MM
MILLING UNIT VERTICAL: 100 X 290 MM
: 70 X 270 MM
STROKE: 120 MM
WEIGHT OF THE MACHINE CA.: CA. 230 KG




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-double mitre saw
manufacturer: elumatec
type: dg102
ptvutm
year of construction: 1986 DOUBLE MITRE SAW MANUFACTURER: ELUMATEC TYPE: DG102 PTVUTM YEAR OF CONSTRUCTION: 1986
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-cutting diameter: 120 mm<br/>cutting range min.: 520 - 4800 mm<br/>saw blade diameter: 380 mm<br/>swivelling range: stepless, 0 - 45 °<br/>saw blade turning speeds: 3800 u/min<br/>total power requirement: 3 kw<br/><br/><br/><br/><br/> CUTTING DIAMETER: 120 MM
CUTTING RANGE MIN.: 520 - 4800 MM
SAW BLADE DIAMETER: 380 MM
SWIVELLING RANGE: STEPLESS, 0 - 45 °
SAW BLADE TURNING SPEEDS: 3800 U/MIN
TOTAL POWER REQUIREMENT: 3 KW




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-elumatec one spindle copy milling machine mod as 70-44 / bj. 2014 / milling area 230 x 90 / spindle speed 12,000 / stroke 110 / hours: 20 / good condition
fe.gi.maschinen.sbg.at

elumatec single spindle - mod copy milling. as 70-44 / year 2014 / milling range 230 x 90 / milling spindle speed 12,000 / stroke 110 / hours: 20 / good condition
fe.gi.maschinen.sbg.at
 ELUMATEC ONE SPINDLE COPY MILLING MACHINE MOD AS 70-44 / BJ. 2014 / MILLING AREA 230 X 90 / SPINDLE SPEED 12,000 / STROKE 110 / HOURS: 20 / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT ELUMATEC SINGLE SPINDLE - MOD COPY MILLING. AS 70-44 / YEAR 2014 / MILLING RANGE 230 X 90 / MILLING SPINDLE SPEED 12,000 / STROKE 110 / HOURS: 20 / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-<br>capacity round maximum diameter: 125 mm<br>angle degrees maximum: 90<br>feeding length automatic feeder: 0 mm<br>diameter sawing blade: 380 mm <br><p>specifications</p>
<p>bandsaw / circelblade / automat</p>
<p>double circel blade</p>
<p>angle l / r degrees  l + r</p>
<p>cutting capacity 90 ? Ø  125 mm</p>
<p>blade dimensions  380 mm</p>
<p>roller conveyor / push up / measuring</p>
<p>3000  cutting speed m/min   2800 / 3800 m/min</p>
<p>dimensions</p>
<p>length  4100 mm</p>
<p>width  1400 mm</p>
<p>height 1800 mm</p>
<p>
CAPACITY ROUND MAXIMUM DIAMETER: 125 MM
ANGLE DEGREES MAXIMUM: 90
FEEDING LENGTH AUTOMATIC FEEDER: 0 MM
DIAMETER SAWING BLADE: 380 MM

SPECIFICATIONS

BANDSAW / CIRCELBLADE / AUTOMAT

DOUBLE CIRCEL BLADE

ANGLE L / R DEGREES &NBSP;L + R

CUTTING CAPACITY 90 ? Ø &NBSP;125 MM

BLADE DIMENSIONS &NBSP;380 MM

ROLLER CONVEYOR / PUSH UP / MEASURING

3000 &NBSP;CUTTING SPEED M/MIN &NBSP; 2800 / 3800 M/MIN

DIMENSIONS

LENGTH &NBSP;4100 MM

WIDTH &NBSP;1400 MM

HEIGHT 1800 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land- 
has to be removed first week in december 2018!

qty. 1 second-hand saw line
mfc.:	elumatec		type:	sap 650/15		built:	2010
max. profile length:		approx. 6800 mm		cut angle:	 90°
saw feed:		electrical		power:		5.5 kw
saw blade dia.:	500 mm		revolution:	2800 rpm
pressure:		7 bar			
air consumption per working stroke	w/o spray:	50 l	with spray:  64 l
dimensions:	13050 x 4620 x 2150 mm – l x d x h	weight:	approx. 4.0 t
 HAS TO BE REMOVED FIRST WEEK IN DECEMBER 2018! QTY. 1 SECOND-HAND SAW LINE MFC.: ELUMATEC TYPE: SAP 650/15 BUILT: 2010 MAX. PROFILE LENGTH: APPROX. 6800 MM CUT ANGLE: 90° SAW FEED: ELECTRICAL POWER: 5.5 KW SAW BLADE DIA.: 500 MM REVOLUTION: 2800 RPM PRESSURE: 7 BAR AIR CONSUMPTION PER WORKING STROKE W/O SPRAY: 50 L WITH SPRAY: 64 L DIMENSIONS: 13050 X 4620 X 2150 MM – L X D X H WEIGHT: APPROX. 4.0 T
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-gebr. aluminium profile machining centre make elumatec
	model sbz 130/01. no.: 20014 year 1993

traverse path x 6300 / 6700 mm
	y stroke 400 mm
	travel in z 265 mm
	spindle speed 1-6000 rpm
	feeds y and z max 18 m / min
	feed x max.		45 m / min
	positioning accuracy +/-0.1 mm
	tool length max.		200 mm
	tool ã? max.		80 mm
	tool holder bt 30
	5.5 kw
	external dimensions:
	8400 mm long
		width 2250 mm
		height 2200 mm
	tool changer with 8 tools
	3-axes-cnc colour control,
	floppy disk drive, capacity 200,000 sets.
	interface
 	8 pneumatic adjustable clamps
	3 angle milling heads several tool holders
 GEBR. ALUMINIUM PROFILE MACHINING CENTRE MAKE ELUMATEC MODEL SBZ 130/01. NO.: 20014 YEAR 1993 TRAVERSE PATH X 6300 / 6700 MM Y STROKE 400 MM TRAVEL IN Z 265 MM SPINDLE SPEED 1-6000 RPM FEEDS Y AND Z MAX 18 M / MIN FEED X MAX. 45 M / MIN POSITIONING ACCURACY +/-0.1 MM TOOL LENGTH MAX. 200 MM TOOL &ATILDE;? MAX. 80 MM TOOL HOLDER BT 30 5.5 KW EXTERNAL DIMENSIONS: 8400 MM LONG WIDTH 2250 MM HEIGHT 2200 MM TOOL CHANGER WITH 8 TOOLS 3-AXES-CNC COLOUR CONTROL, FLOPPY DISK DRIVE, CAPACITY 200,000 SETS. INTERFACE 8 PNEUMATIC ADJUSTABLE CLAMPS 3 ANGLE MILLING HEADS SEVERAL TOOL HOLDERS
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: 13.500 €
Ubicación: Land-maximum cutting length: 6,000 mm
maximum blade diameter: 550 mm
auto. positioning via e 255 control
digital angle display (2 x pan, tilt 2 x)
roller conveyor travelling with
pneumatically collapsible material support arms

 MAXIMUM CUTTING LENGTH: 6,000 MM MAXIMUM BLADE DIAMETER: 550 MM AUTO. POSITIONING VIA E 255 CONTROL DIGITAL ANGLE DISPLAY (2 X PAN, TILT 2 X) ROLLER CONVEYOR TRAVELLING WITH PNEUMATICALLY COLLAPSIBLE MATERIAL SUPPORT ARMS
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-door band drill
manufacturer: elumatec
type: tbm 126
bj.: 05/97

manual available.

more data see nameplate in the annex.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  DOOR BAND DRILL MANUFACTURER: ELUMATEC TYPE: TBM 126 BJ.: 05/97 MANUAL AVAILABLE. MORE DATA SEE NAMEPLATE IN THE ANNEX. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-two head spindle milling machine
manufacturer elumatec
type: kf 78/60
bj.: 12/92

more data see nameplate in the annex.

manual available.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!) 
 TWO HEAD SPINDLE MILLING MACHINE MANUFACTURER ELUMATEC TYPE: KF 78/60 BJ.: 12/92 MORE DATA SEE NAMEPLATE IN THE ANNEX. MANUAL AVAILABLE. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-reconditioned 2018
control: plc siemens s7
blade max: 500 mm
motor output 5.5 kw
saw blade feed: 0-40 mm / s adjustable
saw height control electronic
square 90â° maximum working range: 130 x 130 mm
flat 90â° maximum work area: 190 x 130 mm
round 90â° maximum working range: 170 mm
supply length 2-4000 mm
(saw) approximate weight: 800 kg
		(pusher) approx.: 300 kg
dimensions lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint lxw 7200 mm x 1200 mm which is machine overhauled in our house and is then in a like-new condition. among others were renewed following points:
-new plc control
-conversion to elgo positioning system
-new electric components
-new pneumatic lines
-new pneumatic components
-overhaul of the valve terminal
-built-in menzel minimal lubrication system
-replacing common wear parts
-overhaul of cabin
-overhaul of roller conveyors

the machine is equipped with:
-reinforced motor 5.5 kw
-pneumatic locking of the material in the pusher to the multiple voltage
-gap extension (for a high-quality cutting surface without return tracks)

optional:
-machine safety fence including light curtains to the secure autonomous saw trace - pusher extension for 6 m materials
-extending the saw on a flat 90â° max: 300 x 120 mm
-delivery and installation in your home - training your staff
            RECONDITIONED 2018 CONTROL: PLC SIEMENS S7 BLADE MAX: 500 MM MOTOR OUTPUT 5.5 KW SAW BLADE FEED: 0-40 MM / S ADJUSTABLE SAW HEIGHT CONTROL ELECTRONIC SQUARE 90&ACIRC;&DEG; MAXIMUM WORKING RANGE: 130 X 130 MM FLAT 90&ACIRC;&DEG; MAXIMUM WORK AREA: 190 X 130 MM ROUND 90&ACIRC;&DEG; MAXIMUM WORKING RANGE: 170 MM SUPPLY LENGTH 2-4000 MM (SAW) APPROXIMATE WEIGHT: 800 KG (PUSHER) APPROX.: 300 KG DIMENSIONS LXWXH (SAW) APPROX.: 900MM X 1200MM X 1500MM (PUSHER) APPROX.: 4800MM X 900MM X 1100MM FOOTPRINT LXW 7200 MM X 1200 MM WHICH IS MACHINE OVERHAULED IN OUR HOUSE AND IS THEN IN A LIKE-NEW CONDITION. AMONG OTHERS WERE RENEWED FOLLOWING POINTS: -NEW PLC CONTROL -CONVERSION TO ELGO POSITIONING SYSTEM -NEW ELECTRIC COMPONENTS -NEW PNEUMATIC LINES -NEW PNEUMATIC COMPONENTS -OVERHAUL OF THE VALVE TERMINAL -BUILT-IN MENZEL MINIMAL LUBRICATION SYSTEM -REPLACING COMMON WEAR PARTS -OVERHAUL OF CABIN -OVERHAUL OF ROLLER CONVEYORS THE MACHINE IS EQUIPPED WITH: -REINFORCED MOTOR 5.5 KW -PNEUMATIC LOCKING OF THE MATERIAL IN THE PUSHER TO THE MULTIPLE VOLTAGE -GAP EXTENSION (FOR A HIGH-QUALITY CUTTING SURFACE WITHOUT RETURN TRACKS) OPTIONAL: -MACHINE SAFETY FENCE INCLUDING LIGHT CURTAINS TO THE SECURE AUTONOMOUS SAW TRACE - PUSHER EXTENSION FOR 6 M MATERIALS -EXTENDING THE SAW ON A FLAT 90&ACIRC;&DEG; MAX: 300 X 120 MM -DELIVERY AND INSTALLATION IN YOUR HOME - TRAINING YOUR STAFF
Vendedor: Lupberger Systemlösungen OHG
Año de construcción: usado
Ubicación: Land-dg244/02, 6m cutting length, 5 axis double head cutting off machine, with controller e555

the machine is optionally included, hydro-pneumatic saw feed

the reliable elumatec principle DG244/02, 6M CUTTING LENGTH, 5 AXIS DOUBLE HEAD CUTTING OFF MACHINE, WITH CONTROLLER E555 THE MACHINE IS OPTIONALLY INCLUDED, HYDRO-PNEUMATIC SAW FEED THE RELIABLE ELUMATEC PRINCIPLE "CUTTING FROM BELOW": PROVIDES UNHINDERED ACCESS TO SUPPORT TABLE A LARGE SAW BLADE DIAMETER AND OPTIMAL USE OF THE SAW BLADE OFFER AN IDEAL CUTTING CAPACITY FOR ALL CUTTING VARIATIONS STANDARD FOR ELUMATEC: EXTERNAL DIMENSION CUTS AT ALL ANGLE POSITIONS. THIS MEANS NO LENGTH CALCULATIONS ARE NECESSARY WHEN CUTTING PROFILES OF DIFFERENT HEIGHTS. THIS IS A BIG ADVANTAGE WHEN CUTTING SPECIAL ANGLES THE UNIVERSAL PIVOTING AND TILTING OF BOTH SAW UNITS ALLOWS CUTTING OF HIGH AND WIDE PROFILES AS WELL AS EVERY TYPE OF COMPOUND MITRE. CONSEQUENTLY, MANY PROFILES CAN BE CUT WITHOUT SUPPORT BLOCKS SAFETY HOODS EQUIPPED WITH SAW BLADES AS STANDARD PULSED COOLANT SYSTEM TECHNICAL SPECIFICATIONS MINIMUM CUTTING LENGTH AT 90° 375 MM MINIMUM CUTTING LENGTH TILTED AT 45° 375 MM PIVOTING RANGE INWARDS, UP TO 22.5° INWARDS AND UP TO 140° OUTWARDS AUTOMATICALLY) TILTING RANGE INWARDS, AUTOMATICALLY, 90° - 45° FOR CUTTING RANGE, SEE CUTTING DIAGRAM SAW BLADE DIAMETER 550 MM SAW BLADE SPEED 2,250 RPM POWER SUPPLY 230/400 V, 3~, 50 HZ POWER OUTPUT PER MOTOR 4 KW COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION PER WORKING CYCLE 40 L WITHOUT SPRAYING, 64 L WITH SPRAYING
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-technical data:

-machine is designed for steel. - + suitable aluminium machining
	-operation via two lever - material clamping by pneumatic cylinder
	-workpiece width / b 115 mm x 100 mm clamping range
	-milling range top to stop/kopierschabl.	       b 340 mm x 100 mm - stroke 110 mm above
	-milling area down to stop/kopierschabl.	       w 240 mm x 90 mm
	-hub down front / rear 95 / 45 mm
-spindle speed continuously adjustable 3000 to 12000 rpm
-dosiersprã¼heinrichtung
-air consumption per work cycle
-without spray 12 ltr
-with spray 24 ltr
	-left + right fence rail with measuring scale
	-drive 400 v / 0,75 kw
-space requirement approx. b 900 x h 1400 x d 1250 mm
	-weight approx.				   	  200 kg
 TECHNICAL DATA: -MACHINE IS DESIGNED FOR STEEL. - + SUITABLE ALUMINIUM MACHINING -OPERATION VIA TWO LEVER - MATERIAL CLAMPING BY PNEUMATIC CYLINDER -WORKPIECE WIDTH / B 115 MM X 100 MM CLAMPING RANGE -MILLING RANGE TOP TO STOP/KOPIERSCHABL. B 340 MM X 100 MM - STROKE 110 MM ABOVE -MILLING AREA DOWN TO STOP/KOPIERSCHABL. W 240 MM X 90 MM -HUB DOWN FRONT / REAR 95 / 45 MM -SPINDLE SPEED CONTINUOUSLY ADJUSTABLE 3000 TO 12000 RPM -DOSIERSPR&ATILDE;&FRAC14;HEINRICHTUNG -AIR CONSUMPTION PER WORK CYCLE -WITHOUT SPRAY 12 LTR -WITH SPRAY 24 LTR -LEFT + RIGHT FENCE RAIL WITH MEASURING SCALE -DRIVE 400 V / 0,75 KW -SPACE REQUIREMENT APPROX. B 900 X H 1400 X D 1250 MM -WEIGHT APPROX. 200 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-automatic saw sa 73/36

description 
suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications
material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system
one, two or three-stroke feed can be selected using a selector switch
reliable material feed using two horizontal clamping cylinders
automatic machine shut-down at the end of the profile
pulsed coolant system
equipped with saw blade as standard
technical specifications 
cutting range 150 x 110 mm
saw blade diameter 380 mm
saw blade speed 2,800 rpm
power supply 230/400 v, 3~, 50 hz
power output 3 kw
compressed air supply 7 bar
air consumption per working cycle 19 l without spraying, 31 l with spraying
length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg
feed distance per cycle 5 – 250 mm (up to three cycles possible) AUTOMATIC SAW SA 73/36 DESCRIPTION SUITABLE FOR HIGH-VOLUME CUTTING OF ALUMINIUM PROFILES FOR WINDOW MANUFACTURING AND INDUSTRIAL APPLICATIONS MATERIAL INFEED (CYCLING) PROTECTS THE SURFACE OF THE WORKPIECE BY MEANS OF A SINGLE-STAGE PROFILE LIFTING SYSTEM ONE, TWO OR THREE-STROKE FEED CAN BE SELECTED USING A SELECTOR SWITCH RELIABLE MATERIAL FEED USING TWO HORIZONTAL CLAMPING CYLINDERS AUTOMATIC MACHINE SHUT-DOWN AT THE END OF THE PROFILE PULSED COOLANT SYSTEM EQUIPPED WITH SAW BLADE AS STANDARD TECHNICAL SPECIFICATIONS CUTTING RANGE 150 X 110 MM SAW BLADE DIAMETER 380 MM SAW BLADE SPEED 2,800 RPM POWER SUPPLY 230/400 V, 3~, 50 HZ POWER OUTPUT 3 KW COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION PER WORKING CYCLE 19 L WITHOUT SPRAYING, 31 L WITH SPRAYING LENGTH 1,500 MM, DEPTH 1,100 MM, HEIGHT 1,550 MM, WEIGHT 290 KG FEED DISTANCE PER CYCLE 5 – 250 MM (UP TO THREE CYCLES POSSIBLE)
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-double mitre saw dg 104

description 
the optimal double mitre saw for series production as well as for special applications
the universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. consequently, many profiles can be cut without support blocks
external-dimension cuts possible for all cutting variants. consequently, no complicated length calculations are necessary. this is a big advantage when cutting special angles
pivoting range with digital angle display
safety hoods
equipped with saw blades as standard
equipped with digital display e 111 as standard
pulsed coolant system
technical specifications 
minimum cutting length at 90° 350 mm
minimum cutting length tilted at 45° 350 mm
pivoting range inwards 90° - 45° 
(up to 22.5° manual with digital display)
tilting range inwards pneumatically 90° - 45°
for cutting range, see cutting diagram
saw blade diameter 420 mm
saw blade speed 2,800 rpm
power supply 230/400 v, 3~, 50 hz
power output per motor 4 kw
compressed air supply 7 bar
air consumption per working cycle 40 l without spraying, 64 l with spraying
cutting length 
6,000 mm
options 
dg 104 m machine bed made of steel sheet 
(cutting length 4,500 mm, 6,000 mm)
software for e 555: software module for chop and oversize length cuts

machine is well maintained and working without any problem. perfect condition. machine has included e555 industrial pc. 
 DOUBLE MITRE SAW DG 104 DESCRIPTION THE OPTIMAL DOUBLE MITRE SAW FOR SERIES PRODUCTION AS WELL AS FOR SPECIAL APPLICATIONS THE UNIVERSAL PIVOTING AND TILTING OF BOTH SAW UNITS ALLOWS CUTTING OF HIGH AND WIDE PROFILES AS WELL AS EVERY TYPE OF COMPOUND MITRE. CONSEQUENTLY, MANY PROFILES CAN BE CUT WITHOUT SUPPORT BLOCKS EXTERNAL-DIMENSION CUTS POSSIBLE FOR ALL CUTTING VARIANTS. CONSEQUENTLY, NO COMPLICATED LENGTH CALCULATIONS ARE NECESSARY. THIS IS A BIG ADVANTAGE WHEN CUTTING SPECIAL ANGLES PIVOTING RANGE WITH DIGITAL ANGLE DISPLAY SAFETY HOODS EQUIPPED WITH SAW BLADES AS STANDARD EQUIPPED WITH DIGITAL DISPLAY E 111 AS STANDARD PULSED COOLANT SYSTEM TECHNICAL SPECIFICATIONS MINIMUM CUTTING LENGTH AT 90° 350 MM MINIMUM CUTTING LENGTH TILTED AT 45° 350 MM PIVOTING RANGE INWARDS 90° - 45° (UP TO 22.5° MANUAL WITH DIGITAL DISPLAY) TILTING RANGE INWARDS PNEUMATICALLY 90° - 45° FOR CUTTING RANGE, SEE CUTTING DIAGRAM SAW BLADE DIAMETER 420 MM SAW BLADE SPEED 2,800 RPM POWER SUPPLY 230/400 V, 3~, 50 HZ POWER OUTPUT PER MOTOR 4 KW COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION PER WORKING CYCLE 40 L WITHOUT SPRAYING, 64 L WITH SPRAYING CUTTING LENGTH 6,000 MM OPTIONS DG 104 M MACHINE BED MADE OF STEEL SHEET (CUTTING LENGTH 4,500 MM, 6,000 MM) SOFTWARE FOR E 555: SOFTWARE MODULE FOR CHOP AND OVERSIZE LENGTH CUTS MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-profile machining centre sbz 130 

description 
3-axis profile machining centre
designed for economical and efficient machining of aluminium, steel and stainless steel profiles
all operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces
the on-board turret head ensures that tool changing times are kept very short, thereby optimising machining cycles
the turret head can be equipped with eight tools or angle routing heads
automatic clamping adjustment enables the machine to position the material clamps
3-axis controller
the tool spindle is designed as an additional axis
network connection

technical specifications 
traverse path x-axis, 4,200 mm, 7,200 mm, 8,500 mm, 10,200 mm, 11,500 mm 
(additional lengths on request) vmax. 60 m/min.
traverse path y-axis, 485 mm, vmax. 30 m/min.
traverse path z-axis, 340 mm, vmax. 30 m/min.
max. spindle speed 6,000 rpm, 18,000 rpm with high-speed spindle
spindle power output 5.5 kw
tool changer for eight tools on a turret head
compressed air supply 7 bar
power supply 400 v, 3~, 50 hz, 35 a
air consumption per minute 100 l with spraying

machining length 

sbz 130 – 7.2 m 
max. machining length with profile end machining, 7,080 mm
max. machining length without profile end machining, 7,200 mm   PROFILE MACHINING CENTRE SBZ 130 DESCRIPTION 3-AXIS PROFILE MACHINING CENTRE DESIGNED FOR ECONOMICAL AND EFFICIENT MACHINING OF ALUMINIUM, STEEL AND STAINLESS STEEL PROFILES ALL OPERATIONS, SUCH AS ROUTING, DRILLING AND TAPPING ARE PERFORMED WHILE THE PROFILE BAR IS STATIONARY TO PROTECT THE PROFILE SURFACES THE ON-BOARD TURRET HEAD ENSURES THAT TOOL CHANGING TIMES ARE KEPT VERY SHORT, THEREBY OPTIMISING MACHINING CYCLES THE TURRET HEAD CAN BE EQUIPPED WITH EIGHT TOOLS OR ANGLE ROUTING HEADS AUTOMATIC CLAMPING ADJUSTMENT ENABLES THE MACHINE TO POSITION THE MATERIAL CLAMPS 3-AXIS CONTROLLER THE TOOL SPINDLE IS DESIGNED AS AN ADDITIONAL AXIS NETWORK CONNECTION TECHNICAL SPECIFICATIONS TRAVERSE PATH X-AXIS, 4,200 MM, 7,200 MM, 8,500 MM, 10,200 MM, 11,500 MM (ADDITIONAL LENGTHS ON REQUEST) VMAX. 60 M/MIN. TRAVERSE PATH Y-AXIS, 485 MM, VMAX. 30 M/MIN. TRAVERSE PATH Z-AXIS, 340 MM, VMAX. 30 M/MIN. MAX. SPINDLE SPEED 6,000 RPM, 18,000 RPM WITH HIGH-SPEED SPINDLE SPINDLE POWER OUTPUT 5.5 KW TOOL CHANGER FOR EIGHT TOOLS ON A TURRET HEAD COMPRESSED AIR SUPPLY 7 BAR POWER SUPPLY 400 V, 3~, 50 HZ, 35 A AIR CONSUMPTION PER MINUTE 100 L WITH SPRAYING MACHINING LENGTH SBZ 130 – 7.2 M MAX. MACHINING LENGTH WITH PROFILE END MACHINING, 7,080 MM MAX. MACHINING LENGTH WITHOUT PROFILE END MACHINING, 7,200 MM
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-notching saw aks 134/65, graule asp650 nc

machine is motorized 4 axis controlled and the saws diameter  is 650x500mm

description 
high-performance notching saw for aluminium profiles offering an exceptionally large cutting range
for demanding applications in the areas of curtain wall construction, conservatories and special designs
machining is performed with moving saw units while the profile is stationary, which ensures high accuracy and low space requirements
clamping of several profiles is possible due to the wide stop plate
support table with compound slide and pivoting fence is manually adjustable for optimal use of the cutting range
horizontal and vertical profile clamping
automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles)
hydro-pneumatic saw feed
minimum-volume lubrication system for saw blades
technical specifications 
lower saw unit (vertical): 
saw blade diameter 650 mm
tilting angle max. 45° towards front and 55° towards back, home position: saw blade vertical
max. cutting height of 260 mm at 90°
max. cutting height of 187 mm at 135°
max. cutting height of 130 mm at 30°
power supply 230/400 v, 3~, 50 hz
3 kw of power with motor brake
saw blade speed 1,400 rpm
upper saw unit (horizontal):
saw blade diameter 500 mm
tilting angle max. 55° downwards and 60° upwards, home position: saw blade horizontal
notching depth, max. 190 mm
power supply 230/400 v, 3~, 50 hz
3 kw of power with motor brake
saw blade speed 2,710 rpm
travel 950 mm
support table with working height of 990 mm:
pivoting range from 30° left to 30° right, home position, 0°
pivoting range manual with digital display
compressed air supply 7 bar
air consumption per working cycle 35 l without spraying, 45 l with spraying
length 3,000 mm, depth 1,570 mm, height 1,770 mm, weight 1,400 kg  NOTCHING SAW AKS 134/65, GRAULE ASP650 NC MACHINE IS MOTORIZED 4 AXIS CONTROLLED AND THE SAWS DIAMETER IS 650X500MM DESCRIPTION HIGH-PERFORMANCE NOTCHING SAW FOR ALUMINIUM PROFILES OFFERING AN EXCEPTIONALLY LARGE CUTTING RANGE FOR DEMANDING APPLICATIONS IN THE AREAS OF CURTAIN WALL CONSTRUCTION, CONSERVATORIES AND SPECIAL DESIGNS MACHINING IS PERFORMED WITH MOVING SAW UNITS WHILE THE PROFILE IS STATIONARY, WHICH ENSURES HIGH ACCURACY AND LOW SPACE REQUIREMENTS CLAMPING OF SEVERAL PROFILES IS POSSIBLE DUE TO THE WIDE STOP PLATE SUPPORT TABLE WITH COMPOUND SLIDE AND PIVOTING FENCE IS MANUALLY ADJUSTABLE FOR OPTIMAL USE OF THE CUTTING RANGE HORIZONTAL AND VERTICAL PROFILE CLAMPING AUTOMATIC WORKING CYCLE AT A 90° PIVOTING ANGLE (TWO-HAND CONTROL WHEN CUTTING SPECIAL ANGLES) HYDRO-PNEUMATIC SAW FEED MINIMUM-VOLUME LUBRICATION SYSTEM FOR SAW BLADES TECHNICAL SPECIFICATIONS LOWER SAW UNIT (VERTICAL): SAW BLADE DIAMETER 650 MM TILTING ANGLE MAX. 45° TOWARDS FRONT AND 55° TOWARDS BACK, HOME POSITION: SAW BLADE VERTICAL MAX. CUTTING HEIGHT OF 260 MM AT 90° MAX. CUTTING HEIGHT OF 187 MM AT 135° MAX. CUTTING HEIGHT OF 130 MM AT 30° POWER SUPPLY 230/400 V, 3~, 50 HZ 3 KW OF POWER WITH MOTOR BRAKE SAW BLADE SPEED 1,400 RPM UPPER SAW UNIT (HORIZONTAL): SAW BLADE DIAMETER 500 MM TILTING ANGLE MAX. 55° DOWNWARDS AND 60° UPWARDS, HOME POSITION: SAW BLADE HORIZONTAL NOTCHING DEPTH, MAX. 190 MM POWER SUPPLY 230/400 V, 3~, 50 HZ 3 KW OF POWER WITH MOTOR BRAKE SAW BLADE SPEED 2,710 RPM TRAVEL 950 MM SUPPORT TABLE WITH WORKING HEIGHT OF 990 MM: PIVOTING RANGE FROM 30° LEFT TO 30° RIGHT, HOME POSITION, 0° PIVOTING RANGE MANUAL WITH DIGITAL DISPLAY COMPRESSED AIR SUPPLY 7 BAR AIR CONSUMPTION PER WORKING CYCLE 35 L WITHOUT SPRAYING, 45 L WITH SPRAYING LENGTH 3,000 MM, DEPTH 1,570 MM, HEIGHT 1,770 MM, WEIGHT 1,400 KG
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-profile machining centre sbz 140 

description 
4-axis profile machining centre
designed for economical and efficient machining of aluminium and thin-walled steel profiles
all operations, such as routing, drilling and tapping are performed while the profile bar is stationary to protect the profile surfaces
machining with all tools at angles continuously adjustable from 0° - 180°
the on-board tool magazine ensures that tool changing times are kept short, thereby optimising machining cycles
the magazine can be equipped with eight tools
a rotating angle head with two different tools is available for double-bar and end machining 
(0°?-?90°?-?180°?-?270°) (option)
two separate working zones enable machining in shuttle operation (option)
4-axis controller
15 PROFILE MACHINING CENTRE SBZ 140 DESCRIPTION 4-AXIS PROFILE MACHINING CENTRE DESIGNED FOR ECONOMICAL AND EFFICIENT MACHINING OF ALUMINIUM AND THIN-WALLED STEEL PROFILES ALL OPERATIONS, SUCH AS ROUTING, DRILLING AND TAPPING ARE PERFORMED WHILE THE PROFILE BAR IS STATIONARY TO PROTECT THE PROFILE SURFACES MACHINING WITH ALL TOOLS AT ANGLES CONTINUOUSLY ADJUSTABLE FROM 0° - 180° THE ON-BOARD TOOL MAGAZINE ENSURES THAT TOOL CHANGING TIMES ARE KEPT SHORT, THEREBY OPTIMISING MACHINING CYCLES THE MAGAZINE CAN BE EQUIPPED WITH EIGHT TOOLS A ROTATING ANGLE HEAD WITH TWO DIFFERENT TOOLS IS AVAILABLE FOR DOUBLE-BAR AND END MACHINING (0°?-?90°?-?180°?-?270°) (OPTION) TWO SEPARATE WORKING ZONES ENABLE MACHINING IN SHUTTLE OPERATION (OPTION) 4-AXIS CONTROLLER 15" COLOUR DISPLAY, USB PORTS AND NETWORK CONNECTION WINDOWS OPERATING SYSTEM TECHNICAL SPECIFICATIONS TRAVERSE PATH X-AXIS, 4,200 MM, 6,400 MM, 7,600 MM, 9,700 MM (ADDITIONAL LENGTHS ON REQUEST) VMAX. 65 M/MIN. TRAVERSE PATH Y-AXIS, 850 MM, VMAX. 60 M/MIN. TRAVERSE PATH Z-AXIS, 650 MM, VMAX. 60 M/MIN. PIVOTING ANGLE A-AXIS, 0° - 180°; FREELY PROGRAMMABLE IN 1/10° STEPS MAX. SPINDLE SPEED 24,000 RPM SPINDLE POWER OUTPUT 11 KW, S1 TOOL CHANGER FOR EIGHT TOOLS, ADDITIONAL TOOL POSITIONS ON REQUEST COMPRESSED AIR SUPPLY 7 BAR POWER SUPPLY 400 V, 3~, 50 HZ, 63 A AIR CONSUMPTION PER MINUTE 180 L WITH SPRAYING MACHINING LENGTH SBZ 140 - 9.7 M MAX. MACHINING LENGTH WITH PROFILE END MACHINING, 9,580 MM MAX. MACHINING LENGTH WITHOUT PROFILE END MACHINING, 9,700 MM MACHINE IS PERFECT CONDITION. SET UP TIME IS END OF 2012. NOT USED SO MUCH AND FULL FUNTIONALITY.
Vendedor: Almetay Makine Plastik Metal Yapi Elm.San.Tic.LTD.
Año de construcción: usado
Ubicación: Land-max. profile height: 60mm, milling range horizontal/ vertical: 180x70/ 300x95mm, stroke: 110mm, drilling/ milling speed: 6000/ 12000/min, compressed air supply: 7bar, length: 950mm, width: 850mm, height: 1550mm, weight: 270kg.  MAX. PROFILE HEIGHT: 60MM, MILLING RANGE HORIZONTAL/ VERTICAL: 180X70/ 300X95MM, STROKE: 110MM, DRILLING/ MILLING SPEED: 6000/ 12000/MIN, COMPRESSED AIR SUPPLY: 7BAR, LENGTH: 950MM, WIDTH: 850MM, HEIGHT: 1550MM, WEIGHT: 270KG.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-horizontal cutting range with stop/ copy template: 230x90mm, spindle rotational speed: 12000/min, clamping range: 180x130mm, stroke: 110mm, power: 0.74kw, compressed air supply: 7bar, compressed air consumption: 12-24l/cycle, length: 720mm, width: 650mm, height: 1440mm, weight: 120kg.  HORIZONTAL CUTTING RANGE WITH STOP/ COPY TEMPLATE: 230X90MM, SPINDLE ROTATIONAL SPEED: 12000/MIN, CLAMPING RANGE: 180X130MM, STROKE: 110MM, POWER: 0.74KW, COMPRESSED AIR SUPPLY: 7BAR, COMPRESSED AIR CONSUMPTION: 12-24L/CYCLE, LENGTH: 720MM, WIDTH: 650MM, HEIGHT: 1440MM, WEIGHT: 120KG.
Vendedor: Innovac GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)