77 ofertas

Año de construcción: usado
Ubicación: Land-used emco cycle lathe mate e 160 x 1000;
control heidenhain manual plus 4110;

technical data:
max. swing over bed mm 320;
max. tip height mm 160;
max. turning length mm 1000;
max. rotation speed spindle 4,000 min-1;
spindle bore mm 40.
3 - jaw chuck mm 160;

accessories:
multifix b;
3 - jaw chuck manually;
clamping collet fixture;
coolant system;

  USED EMCO CYCLE LATHE MATE E 160 X 1000; CONTROL HEIDENHAIN MANUAL PLUS 4110; TECHNICAL DATA: MAX. SWING OVER BED MM 320; MAX. TIP HEIGHT MM 160; MAX. TURNING LENGTH MM 1000; MAX. ROTATION SPEED SPINDLE 4,000 MIN-1; SPINDLE BORE MM 40. 3 - JAW CHUCK MM 160; ACCESSORIES: MULTIFIX B; 3 - JAW CHUCK MANUALLY; CLAMPING COLLET FIXTURE; COOLANT SYSTEM;
Vendedor: GEMATEC GmbH
Año de construcción: usado
Ubicación: Land-roller table: ja/nein<br/>:1,8 kw<br/>:2,2 kw<br/>: u/min.<br/>cutting width:1000 mm<br/>dust suction hood:2x100 mm<br/><br/> ROLLER TABLE: JA/NEIN
:1,8 KW
:2,2 KW
: U/MIN.
CUTTING WIDTH:1000 MM
DUST SUCTION HOOD:2X100 MM

Vendedor: Jürgen Oldach - Werkzeuge und Maschinen
Año de construcción: usado
Ubicación: Land-technical data:

brand: emco

type: f3

x way 300 mm
y-way 200 mm
z-way 350 mm
conventional control
iso iso 30 spindle adaptor
spindle speeds 80-2200 u/min
table size 600 x 180 mm
table load: 80 kg
infinitely variable feed rates 50-550 mm / min
rapid traverse rate 1.2 m / min
drive power 1.1 / 1.4 kw
quill stroke 45 mm
coolant system
operating voltage 400 v
total power 3 kw
machine weight approx. 500 kg
space requirement approx. 1.15 x 1.45 x 1.55 m

year: 1992 TECHNICAL DATA: BRAND: EMCO TYPE: F3 X WAY 300 MM Y-WAY 200 MM Z-WAY 350 MM CONVENTIONAL CONTROL ISO ISO 30 SPINDLE ADAPTOR SPINDLE SPEEDS 80-2200 U/MIN TABLE SIZE 600 X 180 MM TABLE LOAD: 80 KG INFINITELY VARIABLE FEED RATES 50-550 MM / MIN RAPID TRAVERSE RATE 1.2 M / MIN DRIVE POWER 1.1 / 1.4 KW QUILL STROKE 45 MM COOLANT SYSTEM OPERATING VOLTAGE 400 V TOTAL POWER 3 KW MACHINE WEIGHT APPROX. 500 KG SPACE REQUIREMENT APPROX. 1.15 X 1.45 X 1.55 M YEAR: 1992
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-turning diameter: 460/220 mm<br/>turning length: 557 mm<br/>control: siemens <br/>total power requirement: 7 kw<br/>weight of the machine ca.: 4,1 t<br/>dimensions of the machine ca.: 2,85 x 1,75 x 1,82 m<br/><br/><br/><br/><br/> TURNING DIAMETER: 460/220 MM
TURNING LENGTH: 557 MM
CONTROL: SIEMENS
TOTAL POWER REQUIREMENT: 7 KW
WEIGHT OF THE MACHINE CA.: 4,1 T
DIMENSIONS OF THE MACHINE CA.: 2,85 X 1,75 X 1,82 M




Vendedor: ADEM Maschinen GmbH
Año de construcción: usado
Precio: 7.500 €
Ubicación: Land-
machine type cnc lathe make femco dugard astral type 25-60 year 1993 control type cnc storage france country of origin taiwan delivery immediately cargo base stock technical details

turning diameter 400 mm turning length 600 mm cnc fanuc ot turning diameter over bed 400 mm turning diameter over slide 300 mm rapid traverse rate (x/z) m/min power 7.5 15 / kw number of tools 12 vdi 30

additional information

cnc lathe with fanuc ot
 3 jaw chuck
 12 pocket revolver
 tailstock
 MACHINE TYPE CNC LATHE MAKE FEMCO DUGARD ASTRAL TYPE 25-60 YEAR 1993 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY CARGO BASE STOCK TECHNICAL DETAILS TURNING DIAMETER 400 MM TURNING LENGTH 600 MM CNC FANUC OT TURNING DIAMETER OVER BED 400 MM TURNING DIAMETER OVER SLIDE 300 MM RAPID TRAVERSE RATE (X/Z) M/MIN POWER 7.5 15 / KW NUMBER OF TOOLS 12 VDI 30 ADDITIONAL INFORMATION CNC LATHE WITH FANUC OT 3 JAW CHUCK 12 POCKET REVOLVER TAILSTOCK
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-de Germany, 46325 Borken-Burlo
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-ma
machine type lathe - cycle controlled make emco type emcomat e300 year 2007 control type cnc storage france country of origin germany delivery immediately cargo base from site technical details

turning diameter 275 mm, turning length 2000 mm control fagor 8055 tc recirculating diameter over bed slide 570 mm circular diameter 340 mm x 310 mm travel - travel - z 2000 mm spindle head din 55027 / 8 x 220 bar diameter 68 mm chuck diameter 250 mm rapid traverse x-ac hse 5 m / min rapid traverse z axis 10 m/min spindle taper multifix c quill diameter 100 mm quill stroke 220 mm recording mk 5 rpm - stem 2 ~ 2,500 rpm total power 24 kw machine weight 4 tons of space approximately 3.4 x 1.6 x 1.8 m accessories kã¼ hlmitteleinrichtung tailstock div. tool holder additional information

lathe - cycle control
 emcomat e 300 x 2000
 feed + bezel + multi fix MA MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE EMCO TYPE EMCOMAT E300 YEAR 2007 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 275 MM, TURNING LENGTH 2000 MM CONTROL FAGOR 8055 TC RECIRCULATING DIAMETER OVER BED SLIDE 570 MM CIRCULAR DIAMETER 340 MM X 310 MM TRAVEL - TRAVEL - Z 2000 MM SPINDLE HEAD DIN 55027 / 8 X 220 BAR DIAMETER 68 MM CHUCK DIAMETER 250 MM RAPID TRAVERSE X-AC HSE 5 M / MIN RAPID TRAVERSE Z AXIS 10 M/MIN SPINDLE TAPER MULTIFIX C QUILL DIAMETER 100 MM QUILL STROKE 220 MM RECORDING MK 5 RPM - STEM 2 ~ 2,500 RPM TOTAL POWER 24 KW MACHINE WEIGHT 4 TONS OF SPACE APPROXIMATELY 3.4 X 1.6 X 1.8 M ACCESSORIES K&ATILDE;&FRAC14; HLMITTELEINRICHTUNG TAILSTOCK DIV. TOOL HOLDER ADDITIONAL INFORMATION LATHE - CYCLE CONTROL EMCOMAT E 300 X 2000 FEED + BEZEL + MULTI FIX
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter: 500 mm<br/>turning length: 550 mm<br/>control: fanuc 18i-tb <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>fanuc 18i-tb cnc control<br/>12-fold turret head<br/>3-jaw chuck <br/>c-axis<br/>driven tools<br/>y-axis<br/>tailstock<br/>coolant device<br/>chip conveyor<br/><br/>technische daten / technical details:<br/>max. umlaufdurchmesser über bett / max rotary diameter over bed    610    mm<br/>max. umlaufdurchmesser über schlitten / max. rotary diameter over sledge    360 <br/>   mm<br/>max. drehdurchmesser / max. turning diameter    500    mm<br/>spitzenweite reitstockversion / center to center with tail stock version    682 <br/>   mm<br/>max. teilelänge / max workpiece lenght    550    mm<br/>planweg (x) / cross way (x)    260    mm<br/>längsweg (z) / longitudinal way (z)    610    mm<br/>y-achsen verfahrweg / y-axis travel    +-40    mm<br/>max. stangendurchmesser / max bar diameter    65    mm<br/>drehzahlbereich / spindle speed     0-5000    upm /rpm<br/>werkzeugrevolver / turret head    12    fach /holes<br/>reitstockaufnahme / tail stock taper    mk4    <br/>eilgang x/y/z / rapid feed y/y/z    30/15/40    m/min.<br/>antriebsleistung spindel / drive capacity spindle    29    kw<br/>gewicht der maschine ca. / weight    5700    kg<br/>technische daten, zubehör und beschreibung der maschine sind unverbindlich -<br/>technical data, accessories and description of the machine are not binding.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 500 MM
TURNING LENGTH: 550 MM
CONTROL: FANUC 18I-TB
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
FANUC 18I-TB CNC CONTROL
12-FOLD TURRET HEAD
3-JAW CHUCK
C-AXIS
DRIVEN TOOLS
Y-AXIS
TAILSTOCK
COOLANT DEVICE
CHIP CONVEYOR

TECHNISCHE DATEN / TECHNICAL DETAILS:
MAX. UMLAUFDURCHMESSER üBER BETT / MAX ROTARY DIAMETER OVER BED 610 MM
MAX. UMLAUFDURCHMESSER üBER SCHLITTEN / MAX. ROTARY DIAMETER OVER SLEDGE 360
MM
MAX. DREHDURCHMESSER / MAX. TURNING DIAMETER 500 MM
SPITZENWEITE REITSTOCKVERSION / CENTER TO CENTER WITH TAIL STOCK VERSION 682
MM
MAX. TEILELäNGE / MAX WORKPIECE LENGHT 550 MM
PLANWEG (X) / CROSS WAY (X) 260 MM
LäNGSWEG (Z) / LONGITUDINAL WAY (Z) 610 MM
Y-ACHSEN VERFAHRWEG / Y-AXIS TRAVEL +-40 MM
MAX. STANGENDURCHMESSER / MAX BAR DIAMETER 65 MM
DREHZAHLBEREICH / SPINDLE SPEED 0-5000 UPM /RPM
WERKZEUGREVOLVER / TURRET HEAD 12 FACH /HOLES
REITSTOCKAUFNAHME / TAIL STOCK TAPER MK4
EILGANG X/Y/Z / RAPID FEED Y/Y/Z 30/15/40 M/MIN.
ANTRIEBSLEISTUNG SPINDEL / DRIVE CAPACITY SPINDLE 29 KW
GEWICHT DER MASCHINE CA. / WEIGHT 5700 KG
TECHNISCHE DATEN, ZUBEHöR UND BESCHREIBUNG DER MASCHINE SIND UNVERBINDLICH -
TECHNICAL DATA, ACCESSORIES AND DESCRIPTION OF THE MACHINE ARE NOT BINDING.





Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-m
machine type lathe - cycle make padovani controlled type laboratory e 200 x 1500 year 1994 control type cnc storage france country of origin italy delivery immediately cargo base stock p
technical details

turning diameter 400 mm turning length 1500 mm control siemens 805 t tip height 200 mm spindle bore 51 mm turning diameter over the cross slide 245 mm speed range - continuously variable 0-3000 rpm tool holder multifix total power requirement 12 kw machine weight approx. 2 t 
 
additional information

in condition
 control siemens 805 cnc  M MACHINE TYPE LATHE - CYCLE MAKE PADOVANI CONTROLLED TYPE LABORATORY E 200 X 1500 YEAR 1994 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN ITALY DELIVERY IMMEDIATELY CARGO BASE STOCK P TECHNICAL DETAILS TURNING DIAMETER 400 MM TURNING LENGTH 1500 MM CONTROL SIEMENS 805 T TIP HEIGHT 200 MM SPINDLE BORE 51 MM TURNING DIAMETER OVER THE CROSS SLIDE 245 MM SPEED RANGE - CONTINUOUSLY VARIABLE 0-3000 RPM TOOL HOLDER MULTIFIX TOTAL POWER REQUIREMENT 12 KW MACHINE WEIGHT APPROX. 2 T ADDITIONAL INFORMATION IN CONDITION CONTROL SIEMENS 805 CNC
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 3.400 €
Ubicación: Land-weight approx.: 3900 kg<br/>dimensions (l x w x h) approx.: 4000 x 2400 x 2400 mm<br/>description: cap 510 over bed, 300 over support, tdc 1500 mm, bore 77 mm, speeds 2500, fagor 8055 control, without chuck, incl. steady rest WEIGHT APPROX.: 3900 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2400 X 2400 MM
DESCRIPTION: CAP 510 OVER BED, 300 OVER SUPPORT, TDC 1500 MM, BORE 77 MM, SPEEDS 2500, FAGOR 8055 CONTROL, WITHOUT CHUCK, INCL. STEADY REST
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-complete non-ferrous separation line dry and wet, equipped with:- charging bin- overbelt magnets- driple screen drum, lindemann- 3x eddy current separators, steinert nes- 2x titech (tomra) finders- hand-picking stationswemco heavy media installation double linecomplete line capacity 35.000 t/y, in 1-1.5 shifts.installation is still operational, well maintained and in good working condition. dry line installed in 2010, hms line 30 years ago.      COMPLETE NON-FERROUS SEPARATION LINE DRY AND WET, EQUIPPED WITH:- CHARGING BIN- OVERBELT MAGNETS- DRIPLE SCREEN DRUM, LINDEMANN- 3X EDDY CURRENT SEPARATORS, STEINERT NES- 2X TITECH (TOMRA) FINDERS- HAND-PICKING STATIONSWEMCO HEAVY MEDIA INSTALLATION DOUBLE LINECOMPLETE LINE CAPACITY 35.000 T/Y, IN 1-1.5 SHIFTS.INSTALLATION IS STILL OPERATIONAL, WELL MAINTAINED AND IN GOOD WORKING CONDITION. DRY LINE INSTALLED IN 2010, HMS LINE 30 YEARS AGO.
Vendedor: Klann Anlagentechnik GmbH
Año de construcción: usado
Precio: 28.800 €
Ubicación: Land-: 900 x 500 mm<br/>: 700/500/500 mm<br/>: 100 mm<br/>: 900 x 500 mm<br/>: 500 kg<br/>: 6,6 kw<br/>: 2.115 mm<br/>: 2.220 mm<br/>: 2.120 mm<br/>: 2.550 kg<br/>cnc heidenhain tnc 410<br/>18. mech. feeds with rapid travel in x,y,z axes<br/>toolmaker accuracy din 8615<br/>hyd. tool clamping with holders sk40 vertical und horizontal<br/>vertical spindle +/- 30° swiveling<br/>swing out device<br/>digital 3d edge finder<br/>work area protection<br/>coolant equiptment<br/>aut. central lubrication<br/>fixed angle table with 10 t-slots<br/>chip collecting tray<br/>machine lamp<br/>users manual in german + ce<br/><br/>complies with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>table: 900 x 500 mm<br/>working area: 700/500/500 mm<br/>spindle revs: 63-3.150 (18) r/min<br/>quill stroke: 100 mm<br/>rigid angle table: 900 x 500 mm<br/>load capacity angle table: 500 kg<br/>drive power: 6,6 kw<br/>length: 2.115 mm<br/>width: 2.220 mm<br/>height: 2.120 mm<br/>gewicht: 2.550 kg<br/><br/><br/><br/> : 900 X 500 MM
: 700/500/500 MM
: 100 MM
: 900 X 500 MM
: 500 KG
: 6,6 KW
: 2.115 MM
: 2.220 MM
: 2.120 MM
: 2.550 KG
CNC HEIDENHAIN TNC 410
18. MECH. FEEDS WITH RAPID TRAVEL IN X,Y,Z AXES
TOOLMAKER ACCURACY DIN 8615
HYD. TOOL CLAMPING WITH HOLDERS SK40 VERTICAL UND HORIZONTAL
VERTICAL SPINDLE +/- 30° SWIVELING
SWING OUT DEVICE
DIGITAL 3D EDGE FINDER
WORK AREA PROTECTION
COOLANT EQUIPTMENT
AUT. CENTRAL LUBRICATION
FIXED ANGLE TABLE WITH 10 T-SLOTS
CHIP COLLECTING TRAY
MACHINE LAMP
USERS MANUAL IN GERMAN + CE

COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




TABLE: 900 X 500 MM
WORKING AREA: 700/500/500 MM
SPINDLE REVS: 63-3.150 (18) R/MIN
QUILL STROKE: 100 MM
RIGID ANGLE TABLE: 900 X 500 MM
LOAD CAPACITY ANGLE TABLE: 500 KG
DRIVE POWER: 6,6 KW
LENGTH: 2.115 MM
WIDTH: 2.220 MM
HEIGHT: 2.120 MM
GEWICHT: 2.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-machine tool emco concept mill 300
year of construction: 2002
workspace:
travel x 420 mm
carriage travel y: 330 mm
carriage travel z: 400 mm
-useful travel vertical (z): 240 mm
distance spindle nose - table surface: 210-450 mm
router table:
clamping surface (l xb): 850 x 325 mm
-maximum table load: 150 kg
-3 t-slots according to din 650: 14 mm
-t-slot distance 100 mm
milling spindle:
-spindle: 㸠60 mm
milling spindle drive:
-ac-motor, power: 11 kw
-speed range: 0-5000 rpm
at 5000 rpm sound level: 72 db / max torque: 100 nm
-option: speed range: 0-8000 rpm
max torque: 78 nm

MACHINE TOOL EMCO CONCEPT MILL 300 YEAR OF CONSTRUCTION: 2002 WORKSPACE: TRAVEL X 420 MM CARRIAGE TRAVEL Y: 330 MM CARRIAGE TRAVEL Z: 400 MM -USEFUL TRAVEL VERTICAL (Z): 240 MM DISTANCE SPINDLE NOSE - TABLE SURFACE: 210-450 MM ROUTER TABLE: CLAMPING SURFACE (L XB): 850 X 325 MM -MAXIMUM TABLE LOAD: 150 KG -3 T-SLOTS ACCORDING TO DIN 650: 14 MM -T-SLOT DISTANCE 100 MM MILLING SPINDLE: -SPINDLE: &ATILDE;&CEDIL; 60 MM MILLING SPINDLE DRIVE: -AC-MOTOR, POWER: 11 KW -SPEED RANGE: 0-5000 RPM AT 5000 RPM SOUND LEVEL: 72 DB / MAX TORQUE: 100 NM -OPTION: SPEED RANGE: 0-8000 RPM MAX TORQUE: 78 NM
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 420 mm<br/>y-travel: 330 mm<br/>z-travel: 400 mm<br/>weight of the machine ca.: 2,5 t<br/><br/><br/><br/><br/> X-TRAVEL: 420 MM
Y-TRAVEL: 330 MM
Z-TRAVEL: 400 MM
WEIGHT OF THE MACHINE CA.: 2,5 T




Vendedor: Hop Machines
Año de construcción: usado
Ubicación: Land--infinitely variable speed control (4 mech. transmission levels)
-integrated digital position indicator
-high drive performance
-fully operational
-bj. 1994

-centre distance: 1000 mm
-tip height: 200 mm
-turning diameter over bed: 400 mm
-swing over carriage: 250 mm
-bed width: 260 mm
-longitudinal slide travel: 900 mm
-cross slide travel: 220 mm
-knife sledge travel: 110 mm
-spindle bore diameter: 50 mm
-spindle taper: 1:22 (din 7178)
-speed range: 35-3000 rpm
-speeds: continuously variable
-feed range longitudinal slide: 0.045 - 0.787 mm / rev
-cross slide feed range: 0.023 - 0,406 mm / rev
-metric threads: 0.4-7.0 mm
-quill diameter: 50 mm
-quill stroke: 120 mm
-quill recording: mk3
-flying eagerly maximum workpiece weight: 50 kg
-maximum workpiece weight in tips: 150 kg
-motor: 5 kw
-voltage: 400 v
-dimensions wxhxd: 1896 x 1240 x 880 mm
-weight: 840 kg -INFINITELY VARIABLE SPEED CONTROL (4 MECH. TRANSMISSION LEVELS) -INTEGRATED DIGITAL POSITION INDICATOR -HIGH DRIVE PERFORMANCE -FULLY OPERATIONAL -BJ. 1994 -CENTRE DISTANCE: 1000 MM -TIP HEIGHT: 200 MM -TURNING DIAMETER OVER BED: 400 MM -SWING OVER CARRIAGE: 250 MM -BED WIDTH: 260 MM -LONGITUDINAL SLIDE TRAVEL: 900 MM -CROSS SLIDE TRAVEL: 220 MM -KNIFE SLEDGE TRAVEL: 110 MM -SPINDLE BORE DIAMETER: 50 MM -SPINDLE TAPER: 1:22 (DIN 7178) -SPEED RANGE: 35-3000 RPM -SPEEDS: CONTINUOUSLY VARIABLE -FEED RANGE LONGITUDINAL SLIDE: 0.045 - 0.787 MM / REV -CROSS SLIDE FEED RANGE: 0.023 - 0,406 MM / REV -METRIC THREADS: 0.4-7.0 MM -QUILL DIAMETER: 50 MM -QUILL STROKE: 120 MM -QUILL RECORDING: MK3 -FLYING EAGERLY MAXIMUM WORKPIECE WEIGHT: 50 KG -MAXIMUM WORKPIECE WEIGHT IN TIPS: 150 KG -MOTOR: 5 KW -VOLTAGE: 400 V -DIMENSIONS WXHXD: 1896 X 1240 X 880 MM -WEIGHT: 840 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-bar material dia.:4-42 mm<br/>bar length:3100 mm<br/>total power requirement: kw<br/>weight of the machine ca.:1,6 t<br/>channel sizes:25  mm<br/>dimensions of the machine ca.:4,4 x 1,0 x 1,6 m<br/><br/>fully automated bar loader magazine for cnc lathes with a maximum bar capacity of 25 mm. actually fits to small emco machines, but. the loader can be upgraded to 42 mm bar stock diameter. BAR MATERIAL DIA.:4-42 MM
BAR LENGTH:3100 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:1,6 T
CHANNEL SIZES:25 MM
DIMENSIONS OF THE MACHINE CA.:4,4 X 1,0 X 1,6 M

FULLY AUTOMATED BAR LOADER MAGAZINE FOR CNC LATHES WITH A MAXIMUM BAR CAPACITY OF 25 MM. ACTUALLY FITS TO SMALL EMCO MACHINES, BUT. THE LOADER CAN BE UPGRADED TO 42 MM BAR STOCK DIAMETER.
Vendedor: BTT Bosetti TechTransfer
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, the possibility of testing, by prior arrangement. machining center with tool magazine. THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. MACHINING CENTER WITH TOOL MAGAZINE.
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-emco lathe cnc mod. turn 365 tc / bj. 98 / 310 x 520 / rods ã? 65 / 0 4,200 u min / 12 pocket tool turret / mk 4 / 18 kw / 20 m-min. / cnc siemens sinumrik 810 d / without tailstock / no angetriebenewerkzeuge / hours: 66.200 / extra: dividing head - bar feeder  fmb state mod turbo 10-65 / good
fe.gi.maschinen.sbg.at

emco lathe cnc mod turn 365 tc / year 98 / 310 x 520 / bars ã? 65 / 0-4,200 rpm / 12 tool turret / mk 4 / 18 kw / 20 m-min. / cnc siemens sinumerik 810 d / without tailstock / without power tools / hours: 66.200 / extra: dividing head - bar loading magazine fmb mod. turbo 10-6 5 / good condition
fe.gi.maschinen.sbg.at EMCO LATHE CNC MOD. TURN 365 TC / BJ. 98 / 310 X 520 / RODS &ATILDE;? 65 / 0 4,200 U MIN / 12 POCKET TOOL TURRET / MK 4 / 18 KW / 20 M-MIN. / CNC SIEMENS SINUMRIK 810 D / WITHOUT TAILSTOCK / NO ANGETRIEBENEWERKZEUGE / HOURS: 66.200 / EXTRA: DIVIDING HEAD - BAR FEEDER FMB STATE MOD TURBO 10-65 / GOOD FE.GI.MASCHINEN.SBG.AT EMCO LATHE CNC MOD TURN 365 TC / YEAR 98 / 310 X 520 / BARS &ATILDE;? 65 / 0-4,200 RPM / 12 TOOL TURRET / MK 4 / 18 KW / 20 M-MIN. / CNC SIEMENS SINUMERIK 810 D / WITHOUT TAILSTOCK / WITHOUT POWER TOOLS / HOURS: 66.200 / EXTRA: DIVIDING HEAD - BAR LOADING MAGAZINE FMB MOD. TURBO 10-6 5 / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-turning diameter: 340 mm<br/>turning length: 250 mm<br/>control: fanuc s21-t <br/>x-axis: 150 mm<br/>z-axis: 300 mm<br/>spindle bore: 53 mm<br/>turning speeds: 0-6000 u/min<br/>rapid traverse: 12 m/min<br/>turret: 8-fach <br/>tool adaptor: vdi 30 <br/>total power requirement:  kw<br/>weight of the machine ca.: 2,4 t<br/>dimensions of the machine ca.: 2,2x1,4x2,0 m<br/>without bar loader<br/>with a lot of accessories (as seen on pictures)<br/><br/><br/><br/><br/> TURNING DIAMETER: 340 MM
TURNING LENGTH: 250 MM
CONTROL: FANUC S21-T
X-AXIS: 150 MM
Z-AXIS: 300 MM
SPINDLE BORE: 53 MM
TURNING SPEEDS: 0-6000 U/MIN
RAPID TRAVERSE: 12 M/MIN
TURRET: 8-FACH
TOOL ADAPTOR: VDI 30
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 2,4 T
DIMENSIONS OF THE MACHINE CA.: 2,2X1,4X2,0 M
WITHOUT BAR LOADER
WITH A LOT OF ACCESSORIES (AS SEEN ON PICTURES)




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-the machine can be operated manually or with the cycle control.

spindle retainer: sk40
vertical spindle speed: 10-5000 rpm
horizontal spindle speed: 10-5000 rpm
levels of transmission: continuously variable
quill stroke: 80 mm
drilling & milling head tilt: +/-90â°
table: 800 x 400 mm
traverse path x-axis: 450 mm
stroke y axis: 350 mm
z axis travel: 400 mm
feed axes: x / y / z
feed speed: 10-5000 mm / min
t - slot width: 14 mm
motor power: 7 / 10 kw
voltage: 400 v
dimensions wxhxd: 2095 x 2060 x 2450 mm
weight: 2000 kg
facilities: emco easycycle control, coolant system THE MACHINE CAN BE OPERATED MANUALLY OR WITH THE CYCLE CONTROL. SPINDLE RETAINER: SK40 VERTICAL SPINDLE SPEED: 10-5000 RPM HORIZONTAL SPINDLE SPEED: 10-5000 RPM LEVELS OF TRANSMISSION: CONTINUOUSLY VARIABLE QUILL STROKE: 80 MM DRILLING & MILLING HEAD TILT: +/-90&ACIRC;&DEG; TABLE: 800 X 400 MM TRAVERSE PATH X-AXIS: 450 MM STROKE Y AXIS: 350 MM Z AXIS TRAVEL: 400 MM FEED AXES: X / Y / Z FEED SPEED: 10-5000 MM / MIN T - SLOT WIDTH: 14 MM MOTOR POWER: 7 / 10 KW VOLTAGE: 400 V DIMENSIONS WXHXD: 2095 X 2060 X 2450 MM WEIGHT: 2000 KG FACILITIES: EMCO EASYCYCLE CONTROL, COOLANT SYSTEM
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 120 mm<br/>turning length: 190 mm<br/>control: siemens 810 t <br/>turning diameter over bed: 180 mm<br/>turning diameter over slide: 75 mm<br/>x-axis: 60 mm<br/>z-axis: 180 mm<br/>drive: 4 kw<br/>turning speeds: 6300 u/min<br/>spindle bore: 30 mm<br/>turret: 8-fach <br/>total power requirement:  kw<br/>weight of the machine ca.: 1,2 t<br/>dimensions of the machine ca.: 2,2x1,0x1,6 m<br/>pneumatic tailstock<br/>hollow clamping system with draw tube<br/>collet device<br/>workpiece catcher<br/>central lubrication<br/>kühmitteleinrichtung<br/>prepared for attachment bar feed<br/><br/><br/><br/><br/> TURNING DIAMETER: 120 MM
TURNING LENGTH: 190 MM
CONTROL: SIEMENS 810 T
TURNING DIAMETER OVER BED: 180 MM
TURNING DIAMETER OVER SLIDE: 75 MM
X-AXIS: 60 MM
Z-AXIS: 180 MM
DRIVE: 4 KW
TURNING SPEEDS: 6300 U/MIN
SPINDLE BORE: 30 MM
TURRET: 8-FACH
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 1,2 T
DIMENSIONS OF THE MACHINE CA.: 2,2X1,0X1,6 M
PNEUMATIC TAILSTOCK
HOLLOW CLAMPING SYSTEM WITH DRAW TUBE
COLLET DEVICE
WORKPIECE CATCHER
CENTRAL LUBRICATION
KüHMITTELEINRICHTUNG
PREPARED FOR ATTACHMENT BAR FEED




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-turning diameter: 1050 mm<br/>turning length: 4000 mm<br/>turning diameter over bed slide: 800 mm<br/>torque: 7880 dan<br/>workpiece weight max.: 4500 kg<br/>feed capacity z - max.: 4325 n<br/>rapid traverse: 10 m/min<br/>control: fanuc 16i tb <br/>tailstock quill diameter: 150 mm<br/>tailstock quill stroke: 150 mm<br/>tailstock taper mt: 5 <br/>c-axis: 15 u/min<br/>x-travel: 600 mm<br/>z-travel: 4000 mm<br/>spindle diameter in front bearing: 285 mm<br/>chuck diameter: 800 mm<br/>spindle bore: 206 mm<br/>spindle turning speed range: 97 - 800 u/min<br/>main drive motor: 80 kw<br/>electrics - voltage/frequency: 400 v/hz<br/>total power requirement: 110 kva<br/>weight of the machine ca.: 26 t<br/>equipped witht:<br/>- cnc control fanuc 18i tb<br/>- ce sign<br/>- c-axis mainspindle<br/>- 2 steadies smw autoblok<br/>- tool turret 12-fold (vdi 60)<br/>- tailstock<br/>- chuck diameter 800 mm<br/><br/>power on 35500h - cutting time 6700h<br/><br/><br/><br/><br/> TURNING DIAMETER: 1050 MM
TURNING LENGTH: 4000 MM
TURNING DIAMETER OVER BED SLIDE: 800 MM
TORQUE: 7880 DAN
WORKPIECE WEIGHT MAX.: 4500 KG
FEED CAPACITY Z - MAX.: 4325 N
RAPID TRAVERSE: 10 M/MIN
CONTROL: FANUC 16I TB
TAILSTOCK QUILL DIAMETER: 150 MM
TAILSTOCK QUILL STROKE: 150 MM
TAILSTOCK TAPER MT: 5
C-AXIS: 15 U/MIN
X-TRAVEL: 600 MM
Z-TRAVEL: 4000 MM
SPINDLE DIAMETER IN FRONT BEARING: 285 MM
CHUCK DIAMETER: 800 MM
SPINDLE BORE: 206 MM
SPINDLE TURNING SPEED RANGE: 97 - 800 U/MIN
MAIN DRIVE MOTOR: 80 KW
ELECTRICS - VOLTAGE/FREQUENCY: 400 V/HZ
TOTAL POWER REQUIREMENT: 110 KVA
WEIGHT OF THE MACHINE CA.: 26 T
EQUIPPED WITHT:
- CNC CONTROL FANUC 18I TB
- CE SIGN
- C-AXIS MAINSPINDLE
- 2 STEADIES SMW AUTOBLOK
- TOOL TURRET 12-FOLD (VDI 60)
- TAILSTOCK
- CHUCK DIAMETER 800 MM

POWER ON 35500H - CUTTING TIME 6700H




Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general

project no.: 904901
number: 1 pcs.
manufacturer: emco
type: hyperturn 665 mcplus
control: siemens 840 d
year of construction: 2002
state of preservation: second-hand machine

description

turning

maximum turning diameter 430 mm
maximum turning length 744 mm
maximum swing over bed 600 mm
max speed main spindle 5000 1/min
maximum performance main spindle in ed 10-40 / 100% 29 kw
maximum torque of main spindle in ed 10-40 / 100% 250 nm
main spindle spindle passage 65 mm
axes on the main spindle unit c
hollow clamping cylinder to the main spindle
maximum speed 5000 1/min spindle
maximum performance counter spindle in ed 10-40 / 100% 29 kw
max torque spindle in ed 10-40 / 100% 250 nm
axis counter spindle unit c
full cylinder on the counter spindle
turret top

number of stations of which powered 12/12
tool holder in the turret vdi 30
the turret of x/z axes
maximum rapid traverse in x/y/z 24 /-/ 30 m / min
gun down

number of stations of which powered 12/12
tool holder in the turret vdi 30
the turret of x/z axes
maximum rapid traverse in x/y/z 24 /-/ 30 m / min

more facilities

splash panel with fully encapsulated workspace
automatic work space door
lighting in the work area
chip conveyor
coolant system
the belt of part of
precast acceptance facility
bar loader/bar feeder
max bar diameter 65 mm
maximum rod length 1200 mm
cabinet cooler as alignment tool

accessories

1 stk. 3 - jaw chuck mm
1 stk. collet chuck mm

general technical data

total power consumption 46 kva
machine dimensions (lxwxh) approx. 3400 x 2600 x 2300 mm
machine weight 7600 kg

comment

we have described the named product with the utmost care. because this but does not come from our production, the data and the equipment details may differ. therefore, we request the description as without any obligation to consider and to check the data during a tour. GENERAL PROJECT NO.: 904901 NUMBER: 1 PCS. MANUFACTURER: EMCO TYPE: HYPERTURN 665 MCPLUS CONTROL: SIEMENS 840 D YEAR OF CONSTRUCTION: 2002 STATE OF PRESERVATION: SECOND-HAND MACHINE DESCRIPTION TURNING MAXIMUM TURNING DIAMETER 430 MM MAXIMUM TURNING LENGTH 744 MM MAXIMUM SWING OVER BED 600 MM MAX SPEED MAIN SPINDLE 5000 1/MIN MAXIMUM PERFORMANCE MAIN SPINDLE IN ED 10-40 / 100% 29 KW MAXIMUM TORQUE OF MAIN SPINDLE IN ED 10-40 / 100% 250 NM MAIN SPINDLE SPINDLE PASSAGE 65 MM AXES ON THE MAIN SPINDLE UNIT C HOLLOW CLAMPING CYLINDER TO THE MAIN SPINDLE MAXIMUM SPEED 5000 1/MIN SPINDLE MAXIMUM PERFORMANCE COUNTER SPINDLE IN ED 10-40 / 100% 29 KW MAX TORQUE SPINDLE IN ED 10-40 / 100% 250 NM AXIS COUNTER SPINDLE UNIT C FULL CYLINDER ON THE COUNTER SPINDLE TURRET TOP NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 24 /-/ 30 M / MIN GUN DOWN NUMBER OF STATIONS OF WHICH POWERED 12/12 TOOL HOLDER IN THE TURRET VDI 30 THE TURRET OF X/Z AXES MAXIMUM RAPID TRAVERSE IN X/Y/Z 24 /-/ 30 M / MIN MORE FACILITIES SPLASH PANEL WITH FULLY ENCAPSULATED WORKSPACE AUTOMATIC WORK SPACE DOOR LIGHTING IN THE WORK AREA CHIP CONVEYOR COOLANT SYSTEM THE BELT OF PART OF PRECAST ACCEPTANCE FACILITY BAR LOADER/BAR FEEDER MAX BAR DIAMETER 65 MM MAXIMUM ROD LENGTH 1200 MM CABINET COOLER AS ALIGNMENT TOOL ACCESSORIES 1 STK. 3 - JAW CHUCK MM 1 STK. COLLET CHUCK MM GENERAL TECHNICAL DATA TOTAL POWER CONSUMPTION 46 KVA MACHINE DIMENSIONS (LXWXH) APPROX. 3400 X 2600 X 2300 MM MACHINE WEIGHT 7600 KG COMMENT WE HAVE DESCRIBED THE NAMED PRODUCT WITH THE UTMOST CARE. BECAUSE THIS BUT DOES NOT COME FROM OUR PRODUCTION, THE DATA AND THE EQUIPMENT DETAILS MAY DIFFER. THEREFORE, WE REQUEST THE DESCRIPTION AS WITHOUT ANY OBLIGATION TO CONSIDER AND TO CHECK THE DATA DURING A TOUR.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Ubicación: Land-homogenising stirrer (1x), make wemco, material stainless steel, shaft length 220 mm, sizes stirring head diameter 100 mm, motor 0,18 kw, 110/220 volt (1 ph), with variable speed drive, floorspace 0.8x0.4 m, total height 0.8 m, weight 25 kgstirrersmixers > stirrers HOMOGENISING STIRRER (1X), MAKE WEMCO, MATERIAL STAINLESS STEEL, SHAFT LENGTH 220 MM, SIZES STIRRING HEAD DIAMETER 100 MM, MOTOR 0,18 KW, 110/220 VOLT (1 PH), WITH VARIABLE SPEED DRIVE, FLOORSPACE 0.8X0.4 M, TOTAL HEIGHT 0.8 M, WEIGHT 25 KGSTIRRERSMIXERS > STIRRERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-top width: 1000 mm
tip height: 200 mm
bdjj0day0m
turning diameter over bed: 400 mm
swing over carriage: 250 mm
bed width: 260 mm
travel longitudinal slide: 900 mm
cross slide travel: 220 mm
knife sledge travel: 55 mm
spindle bore diameter: 50 mm
spindle taper: 1:22 (din 7178)
speed range: 40-3000 rpm
speeds: continuously variable
longitudinal carriage feed range: 0.01 - 0.9 mm.
cross slide feed range: 0.0005 - 0.035
metric threads: 0,3-10 mm
inch thread: 56-2.5 dpi
quill diameter: 50 mm
quill stroke: 120 mm
quill recording: mk3
flying excited maximum workpiece weight: 50 kg
maximum workpiece weight in tips: 150 kg
engine power: 5,5 kw
voltage: 400 v
dimensions wxhxd: 1896 x 1240 x 880 mm
weight: 840 kg TOP WIDTH: 1000 MM TIP HEIGHT: 200 MM BDJJ0DAY0M TURNING DIAMETER OVER BED: 400 MM SWING OVER CARRIAGE: 250 MM BED WIDTH: 260 MM TRAVEL LONGITUDINAL SLIDE: 900 MM CROSS SLIDE TRAVEL: 220 MM KNIFE SLEDGE TRAVEL: 55 MM SPINDLE BORE DIAMETER: 50 MM SPINDLE TAPER: 1:22 (DIN 7178) SPEED RANGE: 40-3000 RPM SPEEDS: CONTINUOUSLY VARIABLE LONGITUDINAL CARRIAGE FEED RANGE: 0.01 - 0.9 MM. CROSS SLIDE FEED RANGE: 0.0005 - 0.035 METRIC THREADS: 0,3-10 MM INCH THREAD: 56-2.5 DPI QUILL DIAMETER: 50 MM QUILL STROKE: 120 MM QUILL RECORDING: MK3 FLYING EXCITED MAXIMUM WORKPIECE WEIGHT: 50 KG MAXIMUM WORKPIECE WEIGHT IN TIPS: 150 KG ENGINE POWER: 5,5 KW VOLTAGE: 400 V DIMENSIONS WXHXD: 1896 X 1240 X 880 MM WEIGHT: 840 KG
Vendedor: ZIEGLER Maschinen & Werkzeuge
Año de construcción: usado
Ubicación: Land-drying oven, make gemco, type cfa, no 86162, material mild steel, max. temperature 850 c°, internal width 300mm, internal depth 650mm, internal height 250mm, electric capacity 18 kw, 380 volt, number of doors: 1, with air circulation 0,75 kw, 220/380 volt, with switchgear, floorspace 1.9x1.2 m, total height 1.75 m, weight 600 kgdrying ovensdryers > drying ovens DRYING OVEN, MAKE GEMCO, TYPE CFA, NO 86162, MATERIAL MILD STEEL, MAX. TEMPERATURE 850 C°, INTERNAL WIDTH 300MM, INTERNAL DEPTH 650MM, INTERNAL HEIGHT 250MM, ELECTRIC CAPACITY 18 KW, 380 VOLT, NUMBER OF DOORS: 1, WITH AIR CIRCULATION 0,75 KW, 220/380 VOLT, WITH SWITCHGEAR, FLOORSPACE 1.9X1.2 M, TOTAL HEIGHT 1.75 M, WEIGHT 600 KGDRYING OVENSDRYERS > DRYING OVENS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-emco cnc lathe mod emcoturn 360 - tcm / bj.  95 / 575 x ã? 460 / over cross slide ã? 220 / spindle ã? 100 cnc siemens sinumerik / u min 0-4,000 rpm 12 stazionen - 6 powered / kupa loader model lm 1000 / chip conveyors / clamping device / good condition
fe.gi.maschinen.sbg.at

emco cnc lathe mod emcoturn 360 - tcm / year 95 / 575 x ã? 460 / over cross slide ã? 220 / 100 / cnc siemens sinumerik / speed 0-4,000 u min / turret 12 places - spindle ã? 6 driven tools / kupa conveyor loader model lm 1000 / chip / clamping device / good condition
fe.gi.maschinen.sbg.at EMCO CNC LATHE MOD EMCOTURN 360 - TCM / BJ. 95 / 575 X &ATILDE;? 460 / OVER CROSS SLIDE &ATILDE;? 220 / SPINDLE &ATILDE;? 100 CNC SIEMENS SINUMERIK / U MIN 0-4,000 RPM 12 STAZIONEN - 6 POWERED / KUPA LOADER MODEL LM 1000 / CHIP CONVEYORS / CLAMPING DEVICE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT EMCO CNC LATHE MOD EMCOTURN 360 - TCM / YEAR 95 / 575 X &ATILDE;? 460 / OVER CROSS SLIDE &ATILDE;? 220 / 100 / CNC SIEMENS SINUMERIK / SPEED 0-4,000 U MIN / TURRET 12 PLACES - SPINDLE &ATILDE;? 6 DRIVEN TOOLS / KUPA CONVEYOR LOADER MODEL LM 1000 / CHIP / CLAMPING DEVICE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-x-travel: 600 mm<br/>y-travel: 500 mm<br/>z-travel: 500 mm<br/>cnc-control: heidenhain itnc 530 <br/>table dimensions: 600 x 600 mm mm<br/>max. table load: 600 kg<br/>spindle taper: iso 40 <br/>spindle turning speed range:  max. 12.000 u/min<br/>distance spindlenose - table min./max.: 170 / 670 mm<br/>feed range: 0 - 2.000 mm/min<br/>rapid traverse: 60 m/min<br/>tool change unit: 30 pos.<br/>coolant: ikz <br/>chip conveyor:  kw<br/>voltage: 400 v<br/>total power requirement: 65 kw<br/>weight of the machine ca.: 8,8 t<br/>dimensions of the machine ca.: 4,50 x 4,15 x 3,20 m<br/>- serial no.: m-640.00206<br/>- as model linearmill 600em but<br/>  with 5-axis (simultaneous) control<br/>- all axis with linear motor technology<br/>  (no ball screw, no back lash!)<br/>- laser tool measuring marposs<br/>- 3dwork piece touch probe marposs<br/>- motor spindle 12.000 rpm<br/>- coolant through spindle<br/><br/><br/><br/><br/> X-TRAVEL: 600 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 500 MM
CNC-CONTROL: HEIDENHAIN ITNC 530
TABLE DIMENSIONS: 600 X 600 MM MM
MAX. TABLE LOAD: 600 KG
SPINDLE TAPER: ISO 40
SPINDLE TURNING SPEED RANGE: MAX. 12.000 U/MIN
DISTANCE SPINDLENOSE - TABLE MIN./MAX.: 170 / 670 MM
FEED RANGE: 0 - 2.000 MM/MIN
RAPID TRAVERSE: 60 M/MIN
TOOL CHANGE UNIT: 30 POS.
COOLANT: IKZ
CHIP CONVEYOR: KW
VOLTAGE: 400 V
TOTAL POWER REQUIREMENT: 65 KW
WEIGHT OF THE MACHINE CA.: 8,8 T
DIMENSIONS OF THE MACHINE CA.: 4,50 X 4,15 X 3,20 M
- SERIAL NO.: M-640.00206
- AS MODEL LINEARMILL 600EM BUT
WITH 5-AXIS (SIMULTANEOUS) CONTROL
- ALL AXIS WITH LINEAR MOTOR TECHNOLOGY
(NO BALL SCREW, NO BACK LASH!)
- LASER TOOL MEASURING MARPOSS
- 3DWORK PIECE TOUCH PROBE MARPOSS
- MOTOR SPINDLE 12.000 RPM
- COOLANT THROUGH SPINDLE




Vendedor: KIRCHGEORG Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-tip height: 140 mm
top width: 650 mm
spindle bore: 26 mm
speed range: 55-2200 rpm
total power: 1.1 / 1.4 kw / 400 v
machine weight: 300 kg

equipment / accessories:

3 jaw chuck 140 mm with jaws
4 jaw chuck 140 mm with jaws
clamping collet fixture with 37 collets 2-20 mm
emco - quick change toolpost with 8 inserts
festst. lathe
mitlfd. lathe
add. chuck flange 140 mm
machine base 80 mm high
8 machines fixators
div. control tools & hardware
machine lamp
chuck protective cover
spaenerueckschutzwand
pole-reversible motor
documentation

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 140 MM TOP WIDTH: 650 MM SPINDLE BORE: 26 MM SPEED RANGE: 55-2200 RPM TOTAL POWER: 1.1 / 1.4 KW / 400 V MACHINE WEIGHT: 300 KG EQUIPMENT / ACCESSORIES: 3 JAW CHUCK 140 MM WITH JAWS 4 JAW CHUCK 140 MM WITH JAWS CLAMPING COLLET FIXTURE WITH 37 COLLETS 2-20 MM EMCO - QUICK CHANGE TOOLPOST WITH 8 INSERTS FESTST. LATHE MITLFD. LATHE ADD. CHUCK FLANGE 140 MM MACHINE BASE 80 MM HIGH 8 MACHINES FIXATORS DIV. CONTROL TOOLS & HARDWARE MACHINE LAMP CHUCK PROTECTIVE COVER SPAENERUECKSCHUTZWAND POLE-REVERSIBLE MOTOR DOCUMENTATION ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03-w030-ra01-02-fw, sn nummer: dd-s 1-w030-r, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03-W030-RA01-02-FW, SN NUMMER: DD-S 1-W030-R, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-maximum umlaufdurchm.: 180 mm
max werkstã¼ckdurchm. for lining pieces: 120 mm
max werkstã¼ckdurchm. for feed items with tailstock: 75 mm
maximum turning length: 121 mm
spindle bore: 20.7 mm
rpm: 150-4000 rpm
total power consumption: 2.2 / 2.8 kw / 400 v
machine weight: approx. 550 kg

equipment / accessories:

cnc control emcotronic tm 02
8-fold tool turret
4 bake 100 mm feed
tailstock with integrated rolling grain
div. tool holders
add. control keyboard for training purposes
cpl. documentation

all technical data are created according to our best knowledge and existing documents; error is expressly excluded.
each party has the opportunity to test the machine before making a purchase in our factory under power.
 MAXIMUM UMLAUFDURCHM.: 180 MM MAX WERKST&ATILDE;&FRAC14;CKDURCHM. FOR LINING PIECES: 120 MM MAX WERKST&ATILDE;&FRAC14;CKDURCHM. FOR FEED ITEMS WITH TAILSTOCK: 75 MM MAXIMUM TURNING LENGTH: 121 MM SPINDLE BORE: 20.7 MM RPM: 150-4000 RPM TOTAL POWER CONSUMPTION: 2.2 / 2.8 KW / 400 V MACHINE WEIGHT: APPROX. 550 KG EQUIPMENT / ACCESSORIES: CNC CONTROL EMCOTRONIC TM 02 8-FOLD TOOL TURRET 4 BAKE 100 MM FEED TAILSTOCK WITH INTEGRATED ROLLING GRAIN DIV. TOOL HOLDERS ADD. CONTROL KEYBOARD FOR TRAINING PURPOSES CPL. DOCUMENTATION ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; ERROR IS EXPRESSLY EXCLUDED. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03.1-w030-r-a02-02-fw, sn nummer: dd03. 1-w030-r, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03.1-W030-R-A02-02-FW, SN NUMMER: DD03. 1-W030-R, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03-1-050-da01-01-fw, sn nummer: dd-s 1-w050-d, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03-1-050-DA01-01-FW, SN NUMMER: DD-S 1-W050-D, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-number 60 positions each machines
fornace lenght 1,50 mt
final bobin 240 -290mm
jet heberlein
fused temco
produce single or double yarn
year 2006
autodoffing NUMBER 60 POSITIONS EACH MACHINES FORNACE LENGHT 1,50 MT FINAL BOBIN 240 -290MM JET HEBERLEIN FUSED TEMCO PRODUCE SINGLE OR DOUBLE YARN YEAR 2006 AUTODOFFING
Vendedor: SERVICES FOR INDUSTRY SAGL
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03.1-w050-da01-01-fw, sn nummer: dds 303.1-w50-d, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03.1-W050-DA01-01-FW, SN NUMMER: DDS 303.1-W50-D, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
major textile knitting  plant liquidation 
(please your intrest with confirmed target price immedaitely)

 
 
knitting
12
monarch fil 8aeq, 30 MAJOR TEXTILE KNITTING PLANT LIQUIDATION (PLEASE YOUR INTREST WITH CONFIRMED TARGET PRICE IMMEDAITELY) KNITTING 12 MONARCH FIL 8AEQ, 30", 4-18 CUT, 8-24 CUT, 84 FEED 2 MONARCH FIL 8AEQ, 30", 18 CUT, 84 FEED, 50 % LYCRA 10 MONARCH FIM 108A, 30", 24 CUT, 108 FEED 1 MONARCH FDR RIB, 26", 14 CUT, 52 FEED 3 MONARCH RIB, 26", 14 CUT, 52 FEED, LYCRA 1 MONARCH RIB, 20", 14 CUT, 40 FEED 1 MONARCH SEC ELECTRONIC STRIPER, 30", 16 CUT, 36 FEED 6 MONARCH FXC4S, 30', 20 CUT, 122 FEED 4 MONARCH RACE, 30", 28 CUT, 122 CUT 1 MONARCH STEP JACK, 30", 20 CUT, 72 FEED 14 MONARCH RXDF, 30", 122 FEED, 3-24 CUT, 6-22 CUT, 5-18 CUT, 24 MONARCH RX4S, 26", 104 FD, 2-28 CUT, 4-24 CUT, 9-18 CUT, 9-22 CUT, 7 MONARCH FXC 4S, 26", 20 CUT, 104 FD. 6 MONARCH RX4S, 26", 20 CUT, 104 FD. 8 MONARCH RX WSY STRIPER, 30", 48 FEED, 5-16 CUT, 1-18 CUT, 1-28 CUT FLAT KNITTING 2 PROTTI PV94 DOUBLELOCK, 240 CM, 12 GAUGE 6 PROTTI PT222, 213 CM, 12 CUT 9 PROTTI PT242 JACQUARD, 218 CM, 12 CUT 35 STOLL JBOMB, 150 CM, 160 CM & 180 CM, 12 GAUGE DYEING 1 GASTON JET DYE, 80 LB., 1996, M6000 CONTROLLER 4 SCLAVOS JET DYE, VENUS HT3, 3 PORT, 1000 LBS., 50 PSI, 1999, UPDATED RECORE CONTROLS, 2014-15 3 GASTON FUTURA, 2 PORT, 1000 LBS., 53 PSI, BARCO CONTROLS, 1987 1 GASTON FUTURA JET DYE, SINGLE TUBE, 160 LBS,, 1992, M3000 CONTROLLER 4 RECORE DYE MACHINE CONTROLLERS, 2012-14 6 THEN AIRFLOW, 1200 LBS., 3 STRAND/3 PORTS, 1988 1 THEN AIRFLOW, 400 LBS., 1 PORT, 1987 3 ARGANTHAN JET DYE, 80 LBS. EACH, 60 PSI, 1982-80 1 ARGANTHAN JET DYE, 400 LBS., 60 PSI, 1982 11 ARGANTHAN JET DYE, 4 PORTS, 1000 LBS., 60 PSI, 1980 7 GASTON 824 JET DYE, 5-3 PORT, 2-2 PORT 200 STAINLESS MIXING TANKS WITH MIXERS, 50 TO 250 GAL. 200 DYEHOUSE TRUCKS, 72" X 42" WIDE X 35" DP. FINISHING 1 SANTEX SANTASTRECH PLUS 120, 48" WIDE, 120 CM, BALLOON EXTRACTOR, 5 TO 60 YPM, 1994 1 SANTEX SANTASHRINK DRYER, 220 CM WIDE, WITH PIN TENTER ENTRY, 1994, 6K/220 GAS IR SRS + SPR+FOUL+CUT, GAS FIRED, 6 CHAMBERS, 2400 LBS./HOUR EVAPORATION CAPACITY, 6.1 MIL BTU/HR 1 TUBETEX DRYER #6 GAS FIRED DRUM, ENTRY WITH 3- FABCON PADDERS 1 BIANCO SLITTER, 86" WIDE, BIANCO SLITTER HEAD (UPDATED 2015), ROPE SQUEEZE, DETWISTER, FOLDER, STAINLESS STEEL 1 BIANCO SLITTER, 86" WIDE, OPENER AND DETWISTER, 2 SCROLLED ROLLS, FLAT FOLDER 1 STENTEX TENTER STENTOTHERM 3300, 1995, 2400 MM MAX. WORKING WIDTH, UNWIND, J BOX, DOGAL UNCURLER, 2 SANTEX PADDERS, 102" WIDE, BIANCO WEFT STRAIGHTNER, E & L GUIDERS, LOW PROFILE GAS FIRED 12 ZONES, 1 KRANTZ SYNCRO SHRINK CONVEYOR DRYER, 100" WIDE BELT 2 FAMATEX TENTER #1 & #2 3 TUBE TEX DRUM DRYERS, 48" WIDE & 72" WIDE 1 FABCON DRUM DRYER, 8 ZONE 5 TUBULAR INSPECTION MACHINES 6 6 FABCON TUBULAR GULLWING TUBULAR COMPACTORS, 52" WIDE FABCON & TUBETEX TUBULAR CALENDARS, 50" & 60" WIDE 1 ARGATHEN BLEACH RANGE, 10 SECTION, 2200 LBS. HOUR. 1 JEMCO BLEACH RANGE, MODEL III 2000 CBR, 2,000 LBS. HOUR, 1995 1 CURTIS & MARBLE, PLASTIC ROLL WRAPPING 1 BESPOKE DYE MIXING SYSTEM, YEAR 2000, 16 PUMPS, 2 MODEL SRD EXACT WEIGH LIQUID CHEMICAL COLLECTING, MIXING, BATCH WEIGHING, 2 IR DUAL HEAD CENTRIFUGAL PUMP, METTLER INTERGRATED SCALE 1 TUBE TEX, DRUM DRYER 1999, WITH 3 TUBE TEX TUBULAR PADDERS 1 1 MONFORTS KNITGOODS TOPTEX 92" WIDE, OPEN WIDTH RUBBER BELT COMPACTOR, KOMBI BATCHER, STEAM HEATED MAIN CYLINDER, 1990 FABCON OPEN PIN TENTER, 90" WIDE X 20' LONG, STEAMING SECTION, BATCHER 1 LABORATORY: RAITECH QUICKWASH, DATACOLOR 500, MILNOR WASHER, HUEBSCH DRYER 50 LB., PLUS MANY MORE ITEMS 25 MERROW SEWING MACHINES, WITH TABLE AND MOTOR 2 GARDNER DENVER AIR COMPRESSOR, 60 HP 1 GARDNER DENVER AIR COMPRESSOR, 200 HP 3 INGERSOLL-RAND SCREW COMPRESSOR, 2- 250 HP, 1-150 HP 3 PROPANE STORAGE TANKS, 30,000 GALLON, WITH MIXER 4 STAINLESS STEEL OUTSIDE TANKS, 6000 GAL TO 10,000 GAL. 3 WASTE BALERS, VERTICAL STYLE 2 CLEAVER BROOKS PACKAGE BOILERS, 800 HP, 1988 + 1989, DEARATOR SYSTEM PLEASE CONTACT US FOR FURTHER INFORMATION .
Vendedor: American Traders
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, seriennummer: 268778, sytemconfiguration: dds03.1-w050-da01-01-fw, sn nummer: dds03. 1-w050-d, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SERIENNUMMER: 268778, SYTEMCONFIGURATION: DDS03.1-W050-DA01-01-FW, SN NUMMER: DDS03. 1-W050-D, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-control: siemens 810t<br/>  spindle speed: 0-4000 rpm<br/>  centre height: 230 mm<br/>  centre width: 635 mm<br/>  spindle boring: 71 mm<br/>  quill stroke: 180 mm<br/>  12 fold revolver (6 stations powered)<br/>  tool retainer vdi 30<br/>  c-axis, tail stock, part catcher<br/>  <br/>  accessories:<br/>  3-jaw chuck röhm 200 mm, div. chucks vdi retainer, collet chuck, short bar loader magazine kupa lm 1000, chip conveyor CONTROL: SIEMENS 810T
SPINDLE SPEED: 0-4000 RPM
CENTRE HEIGHT: 230 MM
CENTRE WIDTH: 635 MM
SPINDLE BORING: 71 MM
QUILL STROKE: 180 MM
12 FOLD REVOLVER (6 STATIONS POWERED)
TOOL RETAINER VDI 30
C-AXIS, TAIL STOCK, PART CATCHER

ACCESSORIES:
3-JAW CHUCK RöHM 200 MM, DIV. CHUCKS VDI RETAINER, COLLET CHUCK, SHORT BAR LOADER MAGAZINE KUPA LM 1000, CHIP CONVEYOR
Vendedor: Theo Stefan OG
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03.1-w030-ra02-02-fw, sn nummer: dds03.1-w030-r, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03.1-W030-RA02-02-FW, SN NUMMER: DDS03.1-W030-R, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-tool taper: sk 40<br/>  table size: 800 x 400 mm<br/>  travel: x-600 mm, y-400 mm, z-400 mm<br/>  18 feed: 16 - 800 mm/min<br/>  18 spindle speed: 63 - 3150 rpm<br/>  quill stroke: 100 mm<br/>  rapid motion<br/>  readout unit heidenhain<br/>  <br/>  accessories:<br/>  coolant equipment, div. tool retainer TOOL TAPER: SK 40
TABLE SIZE: 800 X 400 MM
TRAVEL: X-600 MM, Y-400 MM, Z-400 MM
18 FEED: 16 - 800 MM/MIN
18 SPINDLE SPEED: 63 - 3150 RPM
QUILL STROKE: 100 MM
RAPID MOTION
READOUT UNIT HEIDENHAIN

ACCESSORIES:
COOLANT EQUIPMENT, DIV. TOOL RETAINER
Vendedor: Theo Stefan OG
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, seriennummer: 269778-3369, sytemconfiguration: dds03.1-w050-da01-01-fw, sn nummer: dds03.1-w050-d, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SERIENNUMMER: 269778-3369, SYTEMCONFIGURATION: DDS03.1-W050-DA01-01-FW, SN NUMMER: DDS03.1-W050-D, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-saddlestitcher mueller martini prima with amrys <br>year 2001<br>22049 working hours <br><br>the muller martini prima plus amrys saddlestitcher is a very fast and flexible saddlestitching solution for companies handling work across a wide range of job sizes, <br>with automatic make ready allowing very quick changeover times and running speeds up to 14,000 cycles per hour <br>the muller martini prima plus amrys is ideal for companies targeting high output.<br>the muller martini prima plus amrys features a central system providing a running display of production data together with controls for oblique sheet monitor and semko lateral thickness features. <br><br>maximum size 480 x 320 mm<br>speed 14000 per hour<br><br>9 station chain<br>7 feeder 0370 with amrys <br>1 cover feeder 1528<br>1 free place for card tipper<br>semco<br>stitching unit 390 ( 4 stitching heads hk 75)<br>trimmer 361 with amrys (with out waste conveyor)<br>rapido stacker with amrys <br>pumps<br>mobile crane; good SADDLESTITCHER MUELLER MARTINI PRIMA WITH AMRYS
YEAR 2001
22049 WORKING HOURS

THE MULLER MARTINI PRIMA PLUS AMRYS SADDLESTITCHER IS A VERY FAST AND FLEXIBLE SADDLESTITCHING SOLUTION FOR COMPANIES HANDLING WORK ACROSS A WIDE RANGE OF JOB SIZES,
WITH AUTOMATIC MAKE READY ALLOWING VERY QUICK CHANGEOVER TIMES AND RUNNING SPEEDS UP TO 14,000 CYCLES PER HOUR
THE MULLER MARTINI PRIMA PLUS AMRYS IS IDEAL FOR COMPANIES TARGETING HIGH OUTPUT.
THE MULLER MARTINI PRIMA PLUS AMRYS FEATURES A CENTRAL SYSTEM PROVIDING A RUNNING DISPLAY OF PRODUCTION DATA TOGETHER WITH CONTROLS FOR OBLIQUE SHEET MONITOR AND SEMKO LATERAL THICKNESS FEATURES.

MAXIMUM SIZE 480 X 320 MM
SPEED 14000 PER HOUR

9 STATION CHAIN
7 FEEDER 0370 WITH AMRYS
1 COVER FEEDER 1528
1 FREE PLACE FOR CARD TIPPER
SEMCO
STITCHING UNIT 390 ( 4 STITCHING HEADS HK 75)
TRIMMER 361 WITH AMRYS (WITH OUT WASTE CONVEYOR)
RAPIDO STACKER WITH AMRYS
PUMPS
MOBILE CRANE; GOOD
Vendedor: 3p Vertriebsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, seriennummer: 268778-33072, sytemconfiguration: dds03.1-w050-da01-01-fw, sn nummer: dds03.1-w050-r, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SERIENNUMMER: 268778-33072, SYTEMCONFIGURATION: DDS03.1-W050-DA01-01-FW, SN NUMMER: DDS03.1-W050-R, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel:600 mm<br/>y-travel:500 mm<br/>z-travel:500 mm<br/>control:heidenhain itnc 530 <br/>power capacity - milling spindle:35 / 22,5 kw<br/>tool taper:hsk 63 <br/>tool changer:40 pos.<br/>rotary table diameter:600 x 600 mm<br/>table load capacity:600 kg<br/>turning speeds:50-15.000 1/min<br/>torque:120 / 76 nm<br/>rapid traverse:60 m/min<br/>total connected load: kw<br/>weight of the machine ca.:9 t<br/>dimensions of the machine ca.:3,3 x 3,7 x 3,2 m<br/><br/>5-axis simultaneously machining center, nc-round-swivelling table -100/+122°, internal coolant supply 15 bar 400l incl. cartridge filter, chipconveyor, 3 d touch probe heidenhain ts 440, el. handwheel,  approx. 80.000h \ X-TRAVEL:600 MM
Y-TRAVEL:500 MM
Z-TRAVEL:500 MM
CONTROL:HEIDENHAIN ITNC 530
POWER CAPACITY - MILLING SPINDLE:35 / 22,5 KW
TOOL TAPER:HSK 63
TOOL CHANGER:40 POS.
ROTARY TABLE DIAMETER:600 X 600 MM
TABLE LOAD CAPACITY:600 KG
TURNING SPEEDS:50-15.000 1/MIN
TORQUE:120 / 76 NM
RAPID TRAVERSE:60 M/MIN
TOTAL CONNECTED LOAD: KW
WEIGHT OF THE MACHINE CA.:9 T
DIMENSIONS OF THE MACHINE CA.:3,3 X 3,7 X 3,2 M

5-AXIS SIMULTANEOUSLY MACHINING CENTER, NC-ROUND-SWIVELLING TABLE -100/+122°, INTERNAL COOLANT SUPPLY 15 BAR 400L INCL. CARTRIDGE FILTER, CHIPCONVEYOR, 3 D TOUCH PROBE HEIDENHAIN TS 440, EL. HANDWHEEL, APPROX. 80.000H \"MACHINE ON\", APPROX. 30.000H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds02-1-w200-da01-01-fw, sn nummer: dds2.1-w200-d, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS02-1-W200-DA01-01-FW, SN NUMMER: DDS2.1-W200-D, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: emco
model: emcoturn 900
application type: turning
machine type: cnc lathe
availability: immediately
production year: 2006
location: spain
origin country: austria
delivery time: 4 weeks

general data:
measurements width: 7600 mm
measurements depth: 3270 mm
measurements height: 2900 mm
machine weight: 23000 kg

main drive:
number of spindles: 1
spindle speed range: 800 1/min
spindle motor power: 60 / 80 kw
spindle bore: 206 mm

control unit:
brand: siemens
model: sinumerik 840d

workpiece:
workpiece drm over bed: 1050 mm
workpiece drm over support: 800 mm
workpiece drm: 920 mm
workpiece x: 3000 mm
workpiece weight: 4500 kg

table:
magnetic table: no

tail stock:
pinol diameter: 150 mm
pinol force: 35100 n
pinol tool taper: mt 5

media:
main electronic connection: 400 v; 50/60 hz
power consumption: 103 kva     OVERVIEW: BRAND: EMCO MODEL: EMCOTURN 900 APPLICATION TYPE: TURNING MACHINE TYPE: CNC LATHE AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2006 LOCATION: SPAIN ORIGIN COUNTRY: AUSTRIA DELIVERY TIME: 4 WEEKS GENERAL DATA: MEASUREMENTS WIDTH: 7600 MM MEASUREMENTS DEPTH: 3270 MM MEASUREMENTS HEIGHT: 2900 MM MACHINE WEIGHT: 23000 KG MAIN DRIVE: NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 800 1/MIN SPINDLE MOTOR POWER: 60 / 80 KW SPINDLE BORE: 206 MM CONTROL UNIT: BRAND: SIEMENS MODEL: SINUMERIK 840D WORKPIECE: WORKPIECE DRM OVER BED: 1050 MM WORKPIECE DRM OVER SUPPORT: 800 MM WORKPIECE DRM: 920 MM WORKPIECE X: 3000 MM WORKPIECE WEIGHT: 4500 KG TABLE: MAGNETIC TABLE: NO TAIL STOCK: PINOL DIAMETER: 150 MM PINOL FORCE: 35100 N PINOL TOOL TAPER: MT 5 MEDIA: MAIN ELECTRONIC CONNECTION: 400 V; 50/60 HZ POWER CONSUMPTION: 103 KVA
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: num güttinger, type: fwa-d1ax02-ase-02vrs-ms, modell: achsregelkarte, sytemconfiguration: dds03-1-w030-ra02-02-fw, sn nummer: dds03-1-w030-r, year: 1999, war verbaut inmaschine: weeke bp 195 t, year :1999 MANUFACTURER: NUM G&UUML;TTINGER, TYPE: FWA-D1AX02-ASE-02VRS-MS, MODELL: ACHSREGELKARTE, SYTEMCONFIGURATION: DDS03-1-W030-RA02-02-FW, SN NUMMER: DDS03-1-W030-R, YEAR: 1999, WAR VERBAUT INMASCHINE: WEEKE BP 195 T, YEAR :1999
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)