1340 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-control system: engel cc100	
hours in operation: 58604 h	
clamping force: 175 ton	
opening stroke: 700 mm	
mould height : 250 / 700 min/mm	
size of mould plates: 820 x 750 mm	
screw diameter: 50 mm	
injection volume: 318 cm³	
shot capacity: 287 g	
injection pressure: 2360 bar	
machine dimensions:	
1680 x 5650 x 2180 mm	
weight: 11500 kg	
robot interface	
with robot	
                                   CONTROL SYSTEM: ENGEL CC100 HOURS IN OPERATION: 58604 H CLAMPING FORCE: 175 TON OPENING STROKE: 700 MM MOULD HEIGHT : 250 / 700 MIN/MM SIZE OF MOULD PLATES: 820 X 750 MM SCREW DIAMETER: 50 MM INJECTION VOLUME: 318 CM³ SHOT CAPACITY: 287 G INJECTION PRESSURE: 2360 BAR MACHINE DIMENSIONS: 1680 X 5650 X 2180 MM WEIGHT: 11500 KG ROBOT INTERFACE WITH ROBOT
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-make: hwa cheon<br/>type of machine: hi tech 700 mc<br/>year of manufacture: 2005<br/>cutting diameter: 381 / 700 mm<br/>control system: fanuc<br/>x-travel: 385 mm<br/>z-travel: 2070 mm<br/> MAKE: HWA CHEON
TYPE OF MACHINE: HI TECH 700 MC
YEAR OF MANUFACTURE: 2005
CUTTING DIAMETER: 381 / 700 MM
CONTROL SYSTEM: FANUC
X-TRAVEL: 385 MM
Z-TRAVEL: 2070 MM
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-used bread bun line back tech, type: vario star / combi star -in ex bakery condition-

for kaiser, long moulded and stamped (schnittbrotchen)

- head machine megastar 
- final prover with stamping unit and long moulder combistar
- 6 rows
- in stainless steel
- computer controlling
- with setting device
- condition: good, ready for operation

capacity head machine: max. approx. 9.000 pcs./h
dough weight range: approx. 30 - 150 g
electrical connection: 400 v, 50 hz, 26,4 kw, 53,7 a

inspection and test run are possible at every time.  USED BREAD BUN LINE BACK TECH, TYPE: VARIO STAR / COMBI STAR -IN EX BAKERY CONDITION- FOR KAISER, LONG MOULDED AND STAMPED (SCHNITTBROTCHEN) - HEAD MACHINE MEGASTAR - FINAL PROVER WITH STAMPING UNIT AND LONG MOULDER COMBISTAR - 6 ROWS - IN STAINLESS STEEL - COMPUTER CONTROLLING - WITH SETTING DEVICE - CONDITION: GOOD, READY FOR OPERATION CAPACITY HEAD MACHINE: MAX. APPROX. 9.000 PCS./H DOUGH WEIGHT RANGE: APPROX. 30 - 150 G ELECTRICAL CONNECTION: 400 V, 50 HZ, 26,4 KW, 53,7 A INSPECTION AND TEST RUN ARE POSSIBLE AT EVERY TIME.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-offer munich no. 987 46 has a hole in the 50 mm grid on the table top 18der table siegmund professional and a parallel arrangement of holes in the 25 mm grid on the seiten.die holes have a diameter of 16 mm, and the table is a material thickness of ca. 11, 5-13 mm. the table top is made of through-hardened steel s355j2 n (st 52/3). after processing, the siegmund table is plasma nitrided and coated. the siegmund table is thus doubly hardened. grid lines at a distance of 50 mm will help you with building your vorrichtung.siegmund welding tables 750 mm are standard with scale and siegmund foot standard equipped. machine type welding and spanntischfabrikatsiegmund typprofessional 750artikel-nr.s0.160020.p750.t1abmessungen2.000 x 1,000 x 850 mm incl. fã¼ã?eoberflã¤chenhã¤rtebis 750 vickersfehlerbeschreibunghelle spots on the oberflã¤chelieferumfangsiegmund welding table professional 750siegmund-fuã?-grundausstattunggewicht354 kgzustandneustandort86845 groã?aitingenlieferzeitca. 3-4 wochenneupreis without errors2. 195, 00 â?¬ mwst.preis cpl. with the zubehã¶r1. 921, 00 â?¬ mwst.versandkosten within germany â?¬219.00 incl. packaging vat. ___die machine is located in derwilhelm merkle welding technology gmbhanton-bach-straã?e 3181249 muenchenansprechpartner is mr siegfried awissus. of course we send the machine to you for 60,-â?¬ per spedition in completely germany. our machine ___sie can also contact with 0% finance! we offer sample welding, instrument instruction, as well as a huge range of accessories.  OFFER MUNICH NO. 987 46 HAS A HOLE IN THE 50 MM GRID ON THE TABLE TOP 18DER TABLE SIEGMUND PROFESSIONAL AND A PARALLEL ARRANGEMENT OF HOLES IN THE 25 MM GRID ON THE SEITEN.DIE HOLES HAVE A DIAMETER OF 16 MM, AND THE TABLE IS A MATERIAL THICKNESS OF CA. 11, 5-13 MM. THE TABLE TOP IS MADE OF THROUGH-HARDENED STEEL S355J2 N (ST 52/3). AFTER PROCESSING, THE SIEGMUND TABLE IS PLASMA NITRIDED AND COATED. THE SIEGMUND TABLE IS THUS DOUBLY HARDENED. GRID LINES AT A DISTANCE OF 50 MM WILL HELP YOU WITH BUILDING YOUR VORRICHTUNG.SIEGMUND WELDING TABLES 750 MM ARE STANDARD WITH SCALE AND SIEGMUND FOOT STANDARD EQUIPPED. MACHINE TYPE WELDING AND SPANNTISCHFABRIKATSIEGMUND TYPPROFESSIONAL 750ARTIKEL-NR.S0.160020.P750.T1ABMESSUNGEN2.000 X 1,000 X 850 MM INCL. F&ATILDE;&FRAC14;&ATILDE;?EOBERFL&ATILDE;&CURREN;CHENH&ATILDE;&CURREN;RTEBIS 750 VICKERSFEHLERBESCHREIBUNGHELLE SPOTS ON THE OBERFL&ATILDE;&CURREN;CHELIEFERUMFANGSIEGMUND WELDING TABLE PROFESSIONAL 750SIEGMUND-FU&ATILDE;?-GRUNDAUSSTATTUNGGEWICHT354 KGZUSTANDNEUSTANDORT86845 GRO&ATILDE;?AITINGENLIEFERZEITCA. 3-4 WOCHENNEUPREIS WITHOUT ERRORS2. 195, 00 &ACIRC;?&NOT; MWST.PREIS CPL. WITH THE ZUBEH&ATILDE;&PARA;R1. 921, 00 &ACIRC;?&NOT; MWST.VERSANDKOSTEN WITHIN GERMANY &ACIRC;?&NOT;219.00 INCL. PACKAGING VAT. ___DIE MACHINE IS LOCATED IN DERWILHELM MERKLE WELDING TECHNOLOGY GMBHANTON-BACH-STRA&ATILDE;?E 3181249 MUENCHENANSPRECHPARTNER IS MR SIEGFRIED AWISSUS. OF COURSE WE SEND THE MACHINE TO YOU FOR 60,-&ACIRC;?&NOT; PER SPEDITION IN COMPLETELY GERMANY. OUR MACHINE ___SIE CAN ALSO CONTACT WITH 0% FINANCE! WE OFFER SAMPLE WELDING, INSTRUMENT INSTRUCTION, AS WELL AS A HUGE RANGE OF ACCESSORIES.
Vendedor: Wilhelm Merkle Schweißtechnik GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-overview
brand: twinhorn
model: vq-1500
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2004 
location: india
origin country: taiwan 
production hours: 32500

general data
measurements width: 2700 mm 
measurements depth: 3300 mm 
measurements height: 2700 mm 
machine weight: 11000 kg

control unit
brand: mitsubishi
model: e18e010e0
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 4800 rpm

movement
x-axis movement: 1530 mm 
y-axis movement: 760 mm 
z-axis movement: 650 mm

media
main electronic connection: 400 v 
power consumption: 25 kva

see full technical specifications of this machine at: abc://bit.ly/2q4pjoz  OVERVIEW BRAND: TWINHORN MODEL: VQ-1500 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 32500 GENERAL DATA MEASUREMENTS WIDTH: 2700 MM MEASUREMENTS DEPTH: 3300 MM MEASUREMENTS HEIGHT: 2700 MM MACHINE WEIGHT: 11000 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: E18E010E0 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 4800 RPM MOVEMENT X-AXIS MOVEMENT: 1530 MM Y-AXIS MOVEMENT: 760 MM Z-AXIS MOVEMENT: 650 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 25 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Q4PJOZ
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-we are always looking for used injection moulding machines of manufacturer's angel from model year 1998.    WE ARE ALWAYS LOOKING FOR USED INJECTION MOULDING MACHINES OF MANUFACTURER'S ANGEL FROM MODEL YEAR 1998.
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-overview
brand: dah lih
model: dl-mcv1020ba
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2004
location: india
origin country: taiwan
production hours: 34500

general data
measurements width: 2500 mm 
measurements depth: 2700 mm 
measurements height: 2500 mm 
machine weight: 10500 kg

control unit
brand: fanuc
model: 21i-mb
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 8000 rpm

movement
x-axis movement: 1020 mm 
y-axis movement: 500 mm 
z-axis movement: 500 mm

media
main electronic connection: 400 v 
power consumption: 25 kva

see full technical specifications of this machine at: abc://bit.ly/2ddc4n4 OVERVIEW BRAND: DAH LIH MODEL: DL-MCV1020BA APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2004 LOCATION: INDIA ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 34500 GENERAL DATA MEASUREMENTS WIDTH: 2500 MM MEASUREMENTS DEPTH: 2700 MM MEASUREMENTS HEIGHT: 2500 MM MACHINE WEIGHT: 10500 KG CONTROL UNIT BRAND: FANUC MODEL: 21I-MB CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 8000 RPM MOVEMENT X-AXIS MOVEMENT: 1020 MM Y-AXIS MOVEMENT: 500 MM Z-AXIS MOVEMENT: 500 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V POWER CONSUMPTION: 25 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2DDC4N4
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 74211 Leingarten
Vendedor: Erdmann Export-Import
Año de construcción: usado
Ubicación: Land-technical data:

-stamping of frames, cutting adhesive holes, glue injection
-max profile height 120 mm - smallest frame dimension 400 x 400 mm - punch up to 105 mm
-working pressure 6-8 bar
-with: - trimmer - gluing equipment - 2 vertical pneumatic presser
		-abutment foldaway
		-adjustable punch heads
		-2 stk support arms swivel
		-foot switch
		-separate compressed air storage
		-separate chip cleaner - total approx. footprint	                   b 1200 x h 1500 x 1500 mm
	-weight approx.				   	  			  950 kg
 TECHNICAL DATA: -STAMPING OF FRAMES, CUTTING ADHESIVE HOLES, GLUE INJECTION -MAX PROFILE HEIGHT 120 MM - SMALLEST FRAME DIMENSION 400 X 400 MM - PUNCH UP TO 105 MM -WORKING PRESSURE 6-8 BAR -WITH: - TRIMMER - GLUING EQUIPMENT - 2 VERTICAL PNEUMATIC PRESSER -ABUTMENT FOLDAWAY -ADJUSTABLE PUNCH HEADS -2 STK SUPPORT ARMS SWIVEL -FOOT SWITCH -SEPARATE COMPRESSED AIR STORAGE -SEPARATE CHIP CLEANER - TOTAL APPROX. FOOTPRINT B 1200 X H 1500 X 1500 MM -WEIGHT APPROX. 950 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-x-travel: 300 mm<br/>z-travel: 400 mm<br/> X-TRAVEL: 300 MM
Z-TRAVEL: 400 MM
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-pet bottles perforator – new machine!

the machine has the possibility to be connected to bailing presses.
net price: 5000 euro’s

technical description:
•	engine: 2 x 1,5 kw
•	2 rollers for perforation of pet bottles
•	rollers rotation: 36 times per minute
•	inlet: 1m x 1 m
•	productivity: 2 tons per hour
•	new machine – polish product!

we assure 12 months of warranty and technical service also after this period.
delivery time: till 2 weeks

if you have any questions, please contact us!

telephone: +48 783 891 132 or e-mail adress: 

biuro@bartontech.pl  / bartontech.eu@gmail.com

our webpage: abc.bartontech.eu 
 PET BOTTLES PERFORATOR – NEW MACHINE! THE MACHINE HAS THE POSSIBILITY TO BE CONNECTED TO BAILING PRESSES. NET PRICE: 5000 EURO’S TECHNICAL DESCRIPTION: • ENGINE: 2 X 1,5 KW • 2 ROLLERS FOR PERFORATION OF PET BOTTLES • ROLLERS ROTATION: 36 TIMES PER MINUTE • INLET: 1M X 1 M • PRODUCTIVITY: 2 TONS PER HOUR • NEW MACHINE – POLISH PRODUCT! WE ASSURE 12 MONTHS OF WARRANTY AND TECHNICAL SERVICE ALSO AFTER THIS PERIOD. DELIVERY TIME: TILL 2 WEEKS IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT US! TELEPHONE: +48 783 891 132 OR E-MAIL ADRESS: BIURO@BARTONTECH.PL / BARTONTECH.EU@GMAIL.COM OUR WEBPAGE: ABC.BARTONTECH.EU
Vendedor: Bartontech
Año de construcción: usado
Ubicación: Land-make: fischer mess und regeltechnik<br/>type of machine: ds1103na01ak0w00<br/> MAKE: FISCHER MESS UND REGELTECHNIK
TYPE OF MACHINE: DS1103NA01AK0W00
Vendedor: Erdmann Export-Import
Año de construcción: usado
Precio: 23.500 €
Ubicación: Land-horizontal baler, channel press 

used machine, after a general refurbishment 

price: 23 500 euro’s (without vat)

technical details:
dimension of the machine (l x w x h): 7m x 1.8m x 2.5m
dimension of produced bale: 110cm x 70cm x 120-140cm (length can be regulated)
inlet size: 100cm x 140cm
engine: 22kw
oil heater
oil tank: 100l
binding: 4 wires, horizontally 
capacity: 2 tonnes per hour (cardboard)

3 months of warranty

the machine works perfect, it’s available any moment!

in case of questions, please contact us!

telephone: 0048 783 891 132
e-mail address: biuro@bartontech.pl 
 HORIZONTAL BALER, CHANNEL PRESS USED MACHINE, AFTER A GENERAL REFURBISHMENT PRICE: 23 500 EURO’S (WITHOUT VAT) TECHNICAL DETAILS: DIMENSION OF THE MACHINE (L X W X H): 7M X 1.8M X 2.5M DIMENSION OF PRODUCED BALE: 110CM X 70CM X 120-140CM (LENGTH CAN BE REGULATED) INLET SIZE: 100CM X 140CM ENGINE: 22KW OIL HEATER OIL TANK: 100L BINDING: 4 WIRES, HORIZONTALLY CAPACITY: 2 TONNES PER HOUR (CARDBOARD) 3 MONTHS OF WARRANTY THE MACHINE WORKS PERFECT, IT’S AVAILABLE ANY MOMENT! IN CASE OF QUESTIONS, PLEASE CONTACT US! TELEPHONE: 0048 783 891 132 E-MAIL ADDRESS: BIURO@BARTONTECH.PL
Vendedor: Bartontech
Año de construcción: usado
Precio: 7.750 EU€
Ubicación: Land-inverter welding is the transfer of welding technology from the factory (obtained thanks to large welding robots) to repair services using small-sized welders. these are the most modern devices for joining hard-sealable materials, e.g. with high carbon content, high-strength sheet metal, aluminum, highly coated sheets, e.g. zinc. these welders provide us with welding materials that are just beginning to be used in the production of cars. alternating current converted into direct current. INVERTER WELDING IS THE TRANSFER OF WELDING TECHNOLOGY FROM THE FACTORY (OBTAINED THANKS TO LARGE WELDING ROBOTS) TO REPAIR SERVICES USING SMALL-SIZED WELDERS. THESE ARE THE MOST MODERN DEVICES FOR JOINING HARD-SEALABLE MATERIALS, E.G. WITH HIGH CARBON CONTENT, HIGH-STRENGTH SHEET METAL, ALUMINUM, HIGHLY COATED SHEETS, E.G. ZINC. THESE WELDERS PROVIDE US WITH WELDING MATERIALS THAT ARE JUST BEGINNING TO BE USED IN THE PRODUCTION OF CARS. ALTERNATING CURRENT CONVERTED INTO DIRECT CURRENT.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-overview
brand: yang
model: ml - 25a 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 1996 
location: the netherlands 
origin country: taiwan 
production hours: 17000

general data
measurements width: 4000 mm 
measurements depth: 2000 mm 
measurements height: 2200 mm 
machine weight: 5000 kg

control unit
brand: fanuc
model: series 0-t
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 45 - 4500 rpm

movement
x-axis movement: 216 mm 
y-axis movement: 520 mm

workpiece
workpiece drm: 250 mm
workpiece x: 20 m/min 
workpiece z: 12 m/min

turret
number of turrets: 1

tools
slots in storage: 8
max tool diameter: 85 mm 
type of tool holder: vdi40

media
main electronic connection: 380 v 
chip conveyor: yes
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2ru5klc OVERVIEW BRAND: YANG MODEL: ML - 25A APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1996 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: TAIWAN PRODUCTION HOURS: 17000 GENERAL DATA MEASUREMENTS WIDTH: 4000 MM MEASUREMENTS DEPTH: 2000 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 5000 KG CONTROL UNIT BRAND: FANUC MODEL: SERIES 0-T CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 45 - 4500 RPM MOVEMENT X-AXIS MOVEMENT: 216 MM Y-AXIS MOVEMENT: 520 MM WORKPIECE WORKPIECE DRM: 250 MM WORKPIECE X: 20 M/MIN WORKPIECE Z: 12 M/MIN TURRET NUMBER OF TURRETS: 1 TOOLS SLOTS IN STORAGE: 8 MAX TOOL DIAMETER: 85 MM TYPE OF TOOL HOLDER: VDI40 MEDIA MAIN ELECTRONIC CONNECTION: 380 V CHIP CONVEYOR: YES INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RU5KLC
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-rã¼hle tumbler mpr 220 in good condition

technical data
machine height
1,700-2,100 mm
length of the machine
800-1,000 mm
machine width
1,200 mm
machine weight
700 kg
port value
400 v, 3 kw, 16a
filling
160 l
size of the container
220 l
coolant
r 404
chassis
4 wheels
continuous arm drive
0-50 rpm
high vacuum system
0-95% R&ATILDE;&FRAC14;HLE TUMBLER MPR 220 IN GOOD CONDITION TECHNICAL DATA MACHINE HEIGHT 1,700-2,100 MM LENGTH OF THE MACHINE 800-1,000 MM MACHINE WIDTH 1,200 MM MACHINE WEIGHT 700 KG PORT VALUE 400 V, 3 KW, 16A FILLING 160 L SIZE OF THE CONTAINER 220 L COOLANT R 404 CHASSIS 4 WHEELS CONTINUOUS ARM DRIVE 0-50 RPM HIGH VACUUM SYSTEM 0-95%
Vendedor: Salm KG
Año de construcción: usado
Precio: 1.022 htt
Ubicación: Land-1 1
Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Precio: 3.991 €
Ubicación: Land-technical data:

brand: ver bong

type: bbb600-2
more technical data show/hide
clearance height 160 mm
roller hardness â° shore 85
main motor kw 11
max speed m/s 25
feed max m/min 25
built in 1984
grinding width 600 mm
grinding units 2 total
grinding rollers 2
belt length 1900 mm
 TECHNICAL DATA: BRAND: VER BONG TYPE: BBB600-2 MORE TECHNICAL DATA SHOW/HIDE CLEARANCE HEIGHT 160 MM ROLLER HARDNESS &ACIRC;&DEG; SHORE 85 MAIN MOTOR KW 11 MAX SPEED M/S 25 FEED MAX M/MIN 25 BUILT IN 1984 GRINDING WIDTH 600 MM GRINDING UNITS 2 TOTAL GRINDING ROLLERS 2 BELT LENGTH 1900 MM
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: 15.000 €
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 7 st.<br/>spindle diameter: 50/40 mm<br/>control: cnc <br/>!! the plant can be visited in use !!<br/><br/>window system okoma / hemag for high capacity with oppold tools iv 78<br/><br/>pos. 1: okoma type uf 2 s with long slotted spindle, stepless adjustment<br/>------------------------------------------------<br/><br/>cross-cut saw from above<br/>-3 kw motor, 380 volts, 50 hz<br/>-electronic horizontal adjustment 150 mm<br/><br/>electronic length stop, controlled, length: 3000 mm<br/><br/>1 slit spindle 600 mm with stepless positioning<br/>diameter: 50 mm<br/>power: 18.5 kw<br/>spindle speed: 4000 rpm<br/>tool diameter max .: 400 mm<br/><br/>2 profile spindles<br/>diameter: 50 mm<br/>length: 270 mm<br/>motor: 11 kw, 380 volt, 50 hz<br/>spindle speed: 7000 rpm<br/>tool diameter max .: 230 mm<br/>2-fold vertical stroke clock 90 mm for 3 tools<br/><br/>feed rate stepless: 3 - 21 m / min<br/>against ruler<br/>siemens control: 60 programs, freely storable<br/>digital display 1/10 °<br/>double part set<br/>screen control with error diagnostics program<br/><br/>included<br/>transport reversal conveyor for turning the woods before slot station with<br/>return transport on table. pairwise turn. single delivery of the woods<br/>profile station.<br/><br/>including oppold tools iv 78 wood, with monument protection variant<br/><br/><br/>pos. 2: okoma type uf 2 s<br/>------------------------------------------------<br/><br/>including oppold tools iv 78 wood aluminum<br/><br/><br/>pos. 3: okoma type uf 4 umfälzmaschine - option<br/>------------------------------------------------<br/>4 profile spindles<br/><br/>1st engine 7.5 kw<br/>2nd engine 11.0 kw<br/>3rd engine 7,5 kw<br/>4th engine 7.5 kw<br/><br/>speed ??7,000 rpm<br/><br/>largest tool diameter 240 mm<br/>4 x vertical spindle stroke 2 x 126 mm stroke for wood thicknesses iv 68 - iv <br/>110<br/>horizontal stroke hydraulic-pneumatic up to 70 mm.<br/>lifting movement u-shaped<br/><br/>4 x horizontal turret stop with 6 positions per stop<br/><br/>with synchronized dipping automatic of the 1st spindle<br/>for tear-free refolding.<br/><br/>extendable support for frame milling.<br/><br/>heavy articulation system feed on 2 heavy columns with strong<br/>carrier mounted. the rolls are arranged in groups of 2 or 3 rolls.<br/>each group can be turned to the right (stop side) or to the left,<br/>roll spacing 135 mm, between the feed groups 165 mm.<br/><br/>siemens pc control with 30 freely programmable programs,<br/>memory protection in case of power failure.<br/><br/>control: siemens<br/><br/>hemag olive drill<br/><br/>including oppold tools iv 78 umfälzwerkzeuge<br/><br/><br/>technical data according to manufacturer - without guarantee!<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 7 ST.
SPINDLE DIAMETER: 50/40 MM
CONTROL: CNC
!! THE PLANT CAN BE VISITED IN USE !!

WINDOW SYSTEM OKOMA / HEMAG FOR HIGH CAPACITY WITH OPPOLD TOOLS IV 78

POS. 1: OKOMA TYPE UF 2 S WITH LONG SLOTTED SPINDLE, STEPLESS ADJUSTMENT
------------------------------------------------

CROSS-CUT SAW FROM ABOVE
-3 KW MOTOR, 380 VOLTS, 50 HZ
-ELECTRONIC HORIZONTAL ADJUSTMENT 150 MM

ELECTRONIC LENGTH STOP, CONTROLLED, LENGTH: 3000 MM

1 SLIT SPINDLE 600 MM WITH STEPLESS POSITIONING
DIAMETER: 50 MM
POWER: 18.5 KW
SPINDLE SPEED: 4000 RPM
TOOL DIAMETER MAX .: 400 MM

2 PROFILE SPINDLES
DIAMETER: 50 MM
LENGTH: 270 MM
MOTOR: 11 KW, 380 VOLT, 50 HZ
SPINDLE SPEED: 7000 RPM
TOOL DIAMETER MAX .: 230 MM
2-FOLD VERTICAL STROKE CLOCK 90 MM FOR 3 TOOLS

FEED RATE STEPLESS: 3 - 21 M / MIN
AGAINST RULER
SIEMENS CONTROL: 60 PROGRAMS, FREELY STORABLE
DIGITAL DISPLAY 1/10 °
DOUBLE PART SET
SCREEN CONTROL WITH ERROR DIAGNOSTICS PROGRAM

INCLUDED
TRANSPORT REVERSAL CONVEYOR FOR TURNING THE WOODS BEFORE SLOT STATION WITH
RETURN TRANSPORT ON TABLE. PAIRWISE TURN. SINGLE DELIVERY OF THE WOODS
PROFILE STATION.

INCLUDING OPPOLD TOOLS IV 78 WOOD, WITH MONUMENT PROTECTION VARIANT


POS. 2: OKOMA TYPE UF 2 S
------------------------------------------------

INCLUDING OPPOLD TOOLS IV 78 WOOD ALUMINUM


POS. 3: OKOMA TYPE UF 4 UMFäLZMASCHINE - OPTION
------------------------------------------------
4 PROFILE SPINDLES

1ST ENGINE 7.5 KW
2ND ENGINE 11.0 KW
3RD ENGINE 7,5 KW
4TH ENGINE 7.5 KW

SPEED ??7,000 RPM

LARGEST TOOL DIAMETER 240 MM
4 X VERTICAL SPINDLE STROKE 2 X 126 MM STROKE FOR WOOD THICKNESSES IV 68 - IV
110
HORIZONTAL STROKE HYDRAULIC-PNEUMATIC UP TO 70 MM.
LIFTING MOVEMENT U-SHAPED

4 X HORIZONTAL TURRET STOP WITH 6 POSITIONS PER STOP

WITH SYNCHRONIZED DIPPING AUTOMATIC OF THE 1ST SPINDLE
FOR TEAR-FREE REFOLDING.

EXTENDABLE SUPPORT FOR FRAME MILLING.

HEAVY ARTICULATION SYSTEM FEED ON 2 HEAVY COLUMNS WITH STRONG
CARRIER MOUNTED. THE ROLLS ARE ARRANGED IN GROUPS OF 2 OR 3 ROLLS.
EACH GROUP CAN BE TURNED TO THE RIGHT (STOP SIDE) OR TO THE LEFT,
ROLL SPACING 135 MM, BETWEEN THE FEED GROUPS 165 MM.

SIEMENS PC CONTROL WITH 30 FREELY PROGRAMMABLE PROGRAMS,
MEMORY PROTECTION IN CASE OF POWER FAILURE.

CONTROL: SIEMENS

HEMAG OLIVE DRILL

INCLUDING OPPOLD TOOLS IV 78 UMFäLZWERKZEUGE


TECHNICAL DATA ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-overview
brand: bridgeport
model: vmc 800 22
application type: milling
machine type: machining centers (vertical) 
availability: immediately
production year: 2001 
location: the netherlands 
origin country: united kingdom 
production hours: 32400

general data
measurements width: 2980 mm 
measurements depth: 2200 mm 
measurements height: 2570 mm 
machine weight: 3750 kg

control unit
brand: heidenhain
model: tnc 410
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 6000 rpm

movement
x-axis movement: 800 mm 
y-axis movement: 510 mm 
z-axis movement: 510 mm

workpiece
workpiece weight: 750 kg

table
outer length: 1000 mm 
outer width: 490 mm

tools
slots in storage: 22
max weight: 6 kg
max tool diameter: 130 mm 
max tool length: 250 mm

media
main electronic connection: 420 v 
power consumption: 20 kva 
internal cooling: yes

see full technical specifications of this machine at:
abc://bit.ly/2z8bxw5 OVERVIEW BRAND: BRIDGEPORT MODEL: VMC 800 22 APPLICATION TYPE: MILLING MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2001 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: UNITED KINGDOM PRODUCTION HOURS: 32400 GENERAL DATA MEASUREMENTS WIDTH: 2980 MM MEASUREMENTS DEPTH: 2200 MM MEASUREMENTS HEIGHT: 2570 MM MACHINE WEIGHT: 3750 KG CONTROL UNIT BRAND: HEIDENHAIN MODEL: TNC 410 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 RPM MOVEMENT X-AXIS MOVEMENT: 800 MM Y-AXIS MOVEMENT: 510 MM Z-AXIS MOVEMENT: 510 MM WORKPIECE WORKPIECE WEIGHT: 750 KG TABLE OUTER LENGTH: 1000 MM OUTER WIDTH: 490 MM TOOLS SLOTS IN STORAGE: 22 MAX WEIGHT: 6 KG MAX TOOL DIAMETER: 130 MM MAX TOOL LENGTH: 250 MM MEDIA MAIN ELECTRONIC CONNECTION: 420 V POWER CONSUMPTION: 20 KVA INTERNAL COOLING: YES SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2Z8BXW5
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 3500 kg<br/>grinding length: 880 mm<br/>grinding height: 620 mm<br/>grinding width: 450 mm<br/>dimensions (l x w x h) approx.: 3900 x 2400 x 2550 mm<br/>rapid traverse: 1000 m/min<br/>magnetic plate size: 800 x 400 mm<br/>grinding wheel width x diameter: Ø 350 mm<br/>grinding wheel turining speeds: 1450 rpm<br/>feed range: 0,1 - 10 mm/r<br/>total power requirement: 9,5 kw<br/>description: <u><b>unused joint jpg 84 ahr surface grinder</b></u><br> <br> serial number: p080909<br> technical details:<br> - worktable surface: 800 x 400 mm<br> - max. worktable travel: 880 x 450 mm<br> - max. distanc between spindle center and worktable: 620 mm<br> - slideway: steel line<br> - forward/backward auto feed: 0,1 - 10 mm<br> - forward/backward high speed travel: 1000 mm<br> - forward/backward hand wheel feed (1 turn): 5 mm<br> - wheel speed: 1450 rpm<br> - wheel diameter: 350 mm<br> - machine net weight approx.: 3500 kg<br> - packing dimension: 3150 x 2210 x 2250 mm<br> - rated voltage: 3 phases 380 v<br> - rated power: 9,5 kw<br> - frequency: 50 hz<br> - year of construction: 06.10.2008<br> <br> - all technical informations without guarantee<br> <br> WEIGHT APPROX.: 3500 KG
GRINDING LENGTH: 880 MM
GRINDING HEIGHT: 620 MM
GRINDING WIDTH: 450 MM
DIMENSIONS (L X W X H) APPROX.: 3900 X 2400 X 2550 MM
RAPID TRAVERSE: 1000 M/MIN
MAGNETIC PLATE SIZE: 800 X 400 MM
GRINDING WHEEL WIDTH X DIAMETER: Ø 350 MM
GRINDING WHEEL TURINING SPEEDS: 1450 RPM
FEED RANGE: 0,1 - 10 MM/R
TOTAL POWER REQUIREMENT: 9,5 KW
DESCRIPTION: UNUSED JOINT JPG 84 AHR SURFACE GRINDER

SERIAL NUMBER: P080909
TECHNICAL DETAILS:
- WORKTABLE SURFACE: 800 X 400 MM
- MAX. WORKTABLE TRAVEL: 880 X 450 MM
- MAX. DISTANC BETWEEN SPINDLE CENTER AND WORKTABLE: 620 MM
- SLIDEWAY: STEEL LINE
- FORWARD/BACKWARD AUTO FEED: 0,1 - 10 MM
- FORWARD/BACKWARD HIGH SPEED TRAVEL: 1000 MM
- FORWARD/BACKWARD HAND WHEEL FEED (1 TURN): 5 MM
- WHEEL SPEED: 1450 RPM
- WHEEL DIAMETER: 350 MM
- MACHINE NET WEIGHT APPROX.: 3500 KG
- PACKING DIMENSION: 3150 X 2210 X 2250 MM
- RATED VOLTAGE: 3 PHASES 380 V
- RATED POWER: 9,5 KW
- FREQUENCY: 50 HZ
- YEAR OF CONSTRUCTION: 06.10.2008

- ALL TECHNICAL INFORMATIONS WITHOUT GUARANTEE

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-maximum working width 3020 mm
-maximum material thickness 2 mm
-cutting angle 2.2 â°
-speed up to 25 1/min
-backgauge positioning control elgo up to 750 mm
-table height 850 mm
-front angle stop 2000 mm
-extendable front material support up to 920 mm
-2 st.vordere support arms 1000 mm
-pneum.. supported sheet metal reversible incl. sheet chute forward
-rear grille room
-electric foot switch
-type - single stroke be selected
-400 v / 3 kw
-space requirement approx.	        b 3450 x h 1150 x d 1700 mm
-weight approx.					1600 kg
 TECHNICAL DATA: -MAXIMUM WORKING WIDTH 3020 MM -MAXIMUM MATERIAL THICKNESS 2 MM -CUTTING ANGLE 2.2 &ACIRC;&DEG; -SPEED UP TO 25 1/MIN -BACKGAUGE POSITIONING CONTROL ELGO UP TO 750 MM -TABLE HEIGHT 850 MM -FRONT ANGLE STOP 2000 MM -EXTENDABLE FRONT MATERIAL SUPPORT UP TO 920 MM -2 ST.VORDERE SUPPORT ARMS 1000 MM -PNEUM.. SUPPORTED SHEET METAL REVERSIBLE INCL. SHEET CHUTE FORWARD -REAR GRILLE ROOM -ELECTRIC FOOT SWITCH -TYPE - SINGLE STROKE BE SELECTED -400 V / 3 KW -SPACE REQUIREMENT APPROX. B 3450 X H 1150 X D 1700 MM -WEIGHT APPROX. 1600 KG
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 200 x 400 x 600 mm<br/>description: galileo durometro laboratory technology WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 200 X 400 X 600 MM
DESCRIPTION: GALILEO DUROMETRO LABORATORY TECHNOLOGY
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:

-tip height 140 mm
-top width 650 mm
-largest circulation - ã? - bed 240 mm
				-over support slide 170 mm
-spindle hole 26 mm
-recording of spindle nose thread din 55021 gr. 3
-taper of tailstock quill mk 2
-8 spindle speeds 55-2200 u/min
-feeds - along 0,030 - 0.3 mm
			-plan 0.015 - 0.15 mm
-metric thread pitches 0.25-2.5 mm
96 - 12 gg, thread
-module thread 0.25-2.5 mod
-drive 400 v / 1.4 kw
	-space requirement approx.	        b 1400 x h t 1200 x 720 mm
-weight approx.					  250 kg - with:-digital display
-2 piece 3 - jaw chuck, 2 piece 4 - jaw chuck
-quick change toolpost lathe running with multi fix -
-clamping pliers set with holder
-coolant system
 TECHNICAL DATA: -TIP HEIGHT 140 MM -TOP WIDTH 650 MM -LARGEST CIRCULATION - &ATILDE;? - BED 240 MM -OVER SUPPORT SLIDE 170 MM -SPINDLE HOLE 26 MM -RECORDING OF SPINDLE NOSE THREAD DIN 55021 GR. 3 -TAPER OF TAILSTOCK QUILL MK 2 -8 SPINDLE SPEEDS 55-2200 U/MIN -FEEDS - ALONG 0,030 - 0.3 MM -PLAN 0.015 - 0.15 MM -METRIC THREAD PITCHES 0.25-2.5 MM 96 - 12 GG, THREAD -MODULE THREAD 0.25-2.5 MOD -DRIVE 400 V / 1.4 KW -SPACE REQUIREMENT APPROX. B 1400 X H T 1200 X 720 MM -WEIGHT APPROX. 250 KG - WITH:-DIGITAL DISPLAY -2 PIECE 3 - JAW CHUCK, 2 PIECE 4 - JAW CHUCK -QUICK CHANGE TOOLPOST LATHE RUNNING WITH MULTI FIX - -CLAMPING PLIERS SET WITH HOLDER -COOLANT SYSTEM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 1.700 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 800  mm<br/>description: serial number 1216e<br> voltage 230 v ? 50/60 hz<br> power 2 a<br> WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 800 MM
DESCRIPTION: SERIAL NUMBER 1216E
VOLTAGE 230 V ? 50/60 HZ
POWER 2 A
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: lvd
model: mvs 62/16
application type: shearing 
machine type: shearing machines 
availability: immediately 
production year: 1981
location: the netherlands
origin country: belgium 
production hours: 6000

general data
measurements width: 6500 mm 
measurements depth: 2500 mm 
measurements height: 3850 mm 
machine weight: 35000 kg

max material thickness
steel: 16 mm
stainless steel: 16 mm 
aluminium: 20 mm

media
main electronic connection: 380 v

see full technical specifications of this machine at:
abc://bit.ly/2qgeuq9 OVERVIEW BRAND: LVD MODEL: MVS 62/16 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1981 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: BELGIUM PRODUCTION HOURS: 6000 GENERAL DATA MEASUREMENTS WIDTH: 6500 MM MEASUREMENTS DEPTH: 2500 MM MEASUREMENTS HEIGHT: 3850 MM MACHINE WEIGHT: 35000 KG MAX MATERIAL THICKNESS STEEL: 16 MM STAINLESS STEEL: 16 MM ALUMINIUM: 20 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2QGEUQ9
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.900 €
Ubicación: Land-weight approx.: 130 kg<br/>dimensions (l x w x h) approx.: 400 x 700 x 850 mm<br/>description: coordinate measuring machine<br> setting 150 x 50 mm<br> ?linear scale? tipo at 12 already assembled<br> <br> standard equipment:<br> n° 172-202 objective 10x<br> n° 515530 halogen lamp 24 v, 150 w<br> n° 930967 network cable<br> n° 510188 fuses as spare parts (5 a)<br> n° 517843 protective case<br> <br> technical data:<br> swivel screen with goniometric device (digital)<br> magnification 10x, 20x, 50x, 100x<br> magnification accuracy: ±0.1% / ±0.15%<br> xy built-in viewer resolution: 0.001 mm<br> power supply 220 v, 50 hz<br> size (width x depth x height) 500 x 693 x 1078 mm<br> weight pj-303-150: 116 kg<br> WEIGHT APPROX.: 130 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 700 X 850 MM
DESCRIPTION: COORDINATE MEASURING MACHINE
SETTING 150 X 50 MM
?LINEAR SCALE? TIPO AT 12 ALREADY ASSEMBLED

STANDARD EQUIPMENT:
N° 172-202 OBJECTIVE 10X
N° 515530 HALOGEN LAMP 24 V, 150 W
N° 930967 NETWORK CABLE
N° 510188 FUSES AS SPARE PARTS (5 A)
N° 517843 PROTECTIVE CASE

TECHNICAL DATA:
SWIVEL SCREEN WITH GONIOMETRIC DEVICE (DIGITAL)
MAGNIFICATION 10X, 20X, 50X, 100X
MAGNIFICATION ACCURACY: ±0.1% / ±0.15%
XY BUILT-IN VIEWER RESOLUTION: 0.001 MM
POWER SUPPLY 220 V, 50 HZ
SIZE (WIDTH X DEPTH X HEIGHT) 500 X 693 X 1078 MM
WEIGHT PJ-303-150: 116 KG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-used vertical machining center serial. mazak, type v655/80, mazatrol m 32. 

technical data traverse path x, y, z 2000 x 650 x 650 tool holder sk50 maximum spindle speed 6000 rpm
spindle motor power 18.5 kw
machine weight 13.5 to facilities 30-fach tool changer good condition, direct from the owner
 USED VERTICAL MACHINING CENTER SERIAL. MAZAK, TYPE V655/80, MAZATROL M 32. TECHNICAL DATA TRAVERSE PATH X, Y, Z 2000 X 650 X 650 TOOL HOLDER SK50 MAXIMUM SPINDLE SPEED 6000 RPM SPINDLE MOTOR POWER 18.5 KW MACHINE WEIGHT 13.5 TO FACILITIES 30-FACH TOOL CHANGER GOOD CONDITION, DIRECT FROM THE OWNER
Vendedor: AH Zerspanungstechnik Horn
Año de construcción: usado
Ubicación: Land-spindle taper:spannzange/collet <br/>spindle stroke:100 mm<br/>number of spindles:11 stück<br/>number of stations:9 stück<br/>cycle time:2 - 12  sec<br/>revolutions per minute:bohren/drill/taladrar 745...2180 u/min.<br/>revolutions per minute:gewinden/threading/roscar 185...350 u/min.<br/>feed:0-1 m/min<br/>total power requirement:ca. 15 kw<br/>weight of the machine ca.:4,5 t<br/>space requirement of the machine approx.:3,0 x 8,0 x 2,5 m<br/>dimensions of machine:2,5 x 2,5 x 2,5 m<br/><br/>the machine has been constructed for the metal cutting process of workpieces in one clamping session.  first step ist the cutting of the work piece from the bar which is coming from the iemca bar loader t 560/40p    technical description of a workpiece which is epuiped at the machine at the moment:  processing units:  station 1 bucking of the bar material coming from the bar loader  station 2 piecing of cone station 3 milling 1 various station 4 milling 2 various station 5 milling 3 various station 6 piecing of cone station 7 thread milling station 8 free / no working station 9 cross bore station 10 free / no working station 11 grinding station 12 knock out     machine is equipped with a feeding-and unloading unit for workpieces.   incl. chip conveyer with magnetic absorber  incl. filter mist system incl. full machine cover iemca loader t 560/ 40 p dia max 40 mm   SPINDLE TAPER:SPANNZANGE/COLLET
SPINDLE STROKE:100 MM
NUMBER OF SPINDLES:11 STüCK
NUMBER OF STATIONS:9 STüCK
CYCLE TIME:2 - 12 SEC
REVOLUTIONS PER MINUTE:BOHREN/DRILL/TALADRAR 745...2180 U/MIN.
REVOLUTIONS PER MINUTE:GEWINDEN/THREADING/ROSCAR 185...350 U/MIN.
FEED:0-1 M/MIN
TOTAL POWER REQUIREMENT:CA. 15 KW
WEIGHT OF THE MACHINE CA.:4,5 T
SPACE REQUIREMENT OF THE MACHINE APPROX.:3,0 X 8,0 X 2,5 M
DIMENSIONS OF MACHINE:2,5 X 2,5 X 2,5 M

THE MACHINE HAS BEEN CONSTRUCTED FOR THE METAL CUTTING PROCESS OF WORKPIECES IN ONE CLAMPING SESSION. FIRST STEP IST THE CUTTING OF THE WORK PIECE FROM THE BAR WHICH IS COMING FROM THE IEMCA BAR LOADER T 560/40P TECHNICAL DESCRIPTION OF A WORKPIECE WHICH IS EPUIPED AT THE MACHINE AT THE MOMENT: PROCESSING UNITS: STATION 1 BUCKING OF THE BAR MATERIAL COMING FROM THE BAR LOADER STATION 2 PIECING OF CONE STATION 3 MILLING 1 VARIOUS STATION 4 MILLING 2 VARIOUS STATION 5 MILLING 3 VARIOUS STATION 6 PIECING OF CONE STATION 7 THREAD MILLING STATION 8 FREE / NO WORKING STATION 9 CROSS BORE STATION 10 FREE / NO WORKING STATION 11 GRINDING STATION 12 KNOCK OUT MACHINE IS EQUIPPED WITH A FEEDING-AND UNLOADING UNIT FOR WORKPIECES. INCL. CHIP CONVEYER WITH MAGNETIC ABSORBER INCL. FILTER MIST SYSTEM INCL. FULL MACHINE COVER IEMCA LOADER T 560/ 40 P DIA MAX 40 MM
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, the possibility of testing, by prior arrangement. . only aluminium die-cut 1-3 mm thick. their advantage is a small space of 4 x 4 m including a safe zone. another special feature is a brush table to reduce sounds work. a part of the sale includes stamp, machine parts and sheet metal cad / cam. THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. . ONLY ALUMINIUM DIE-CUT 1-3 MM THICK. THEIR ADVANTAGE IS A SMALL SPACE OF 4 X 4 M INCLUDING A SAFE ZONE. ANOTHER SPECIAL FEATURE IS A BRUSH TABLE TO REDUCE SOUNDS WORK. A PART OF THE SALE INCLUDES STAMP, MACHINE PARTS AND SHEET METAL CAD / CAM.
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-rounding length  1600 mm, \r\ndoughweightrange 250 - 4000 g \r\ncap. max.  2.600 stck./h\r\ntechnical data as written in a leaflet\r\n ROUNDING LENGTH 1600 MM, \R\NDOUGHWEIGHTRANGE 250 - 4000 G \R\NCAP. MAX. 2.600 STCK./H\R\NTECHNICAL DATA AS WRITTEN IN A LEAFLET\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-
tip height: 265 / 360 mm
top width: 3050 mm
spindle bore: 81 mm
speed range: 33-2000 rpm
total power: 7,5 kw / 400 v
machine weight: 4100 kg

equipment / accessories:

3 jaw chuck
multifix quick change toolpost
removable bed bridge

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
anyone can test the machine before making a purchase in our factory under power.
 TIP HEIGHT: 265 / 360 MM TOP WIDTH: 3050 MM SPINDLE BORE: 81 MM SPEED RANGE: 33-2000 RPM TOTAL POWER: 7,5 KW / 400 V MACHINE WEIGHT: 4100 KG EQUIPMENT / ACCESSORIES: 3 JAW CHUCK MULTIFIX QUICK CHANGE TOOLPOST REMOVABLE BED BRIDGE ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. ANYONE CAN TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-mobile dust extractor\r\nschuko\r\ntype: vacomat 180 xp\r\n\r\ntechnical data:\r\nconnection Ø: 180 mm\r\nfilter cleaning :pneumatical (manual start)\r\nnominal volume flow: 1832 m³/h\r\nmotor power: 3,0 kw\r\nfilter surface area: 13,5 m²\r\ntest sign h3 / bghm ho 163002 \r\ndust level m, awn 16 cone \r\nsound absorbation: 72 db(a)\r\nincl. 2 chip collection bins with rollers for easy transport\r\nvolume of chip collection bin: each approx. 135 l\r\ndimensions (lxwxh): 2065 x 900 x 2130 mm\r\n MOBILE DUST EXTRACTOR\R\NSCHUKO\R\NTYPE: VACOMAT 180 XP\R\N\R\NTECHNICAL DATA:\R\NCONNECTION Ø: 180 MM\R\NFILTER CLEANING :PNEUMATICAL (MANUAL START)\R\NNOMINAL VOLUME FLOW: 1832 M³/H\R\NMOTOR POWER: 3,0 KW\R\NFILTER SURFACE AREA: 13,5 M²\R\NTEST SIGN H3 / BGHM HO 163002 \R\NDUST LEVEL M, AWN 16 CONE \R\NSOUND ABSORBATION: 72 DB(A)\R\NINCL. 2 CHIP COLLECTION BINS WITH ROLLERS FOR EASY TRANSPORT\R\NVOLUME OF CHIP COLLECTION BIN: EACH APPROX. 135 L\R\NDIMENSIONS (LXWXH): 2065 X 900 X 2130 MM\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-bobst sp 103-er, 1994
ref.nr: 2587 manufacturer bobst model sp 103-er year built: 1994 speed: 7500 sh/h max sheet size: 103 x 72 cm availability: immediately condition: good price: on technical request spezification: â?¢ centerline
â?¢ non-stop feeder & delivery
â?¢ double sheet control
â?¢ one stripping frame, one universal lower blanking frame, 2 cutting frame â?¢ max speed of 7500 sheets/hour
â?¢ total hours functions 35865
 BOBST SP 103-ER, 1994 REF.NR: 2587 MANUFACTURER BOBST MODEL SP 103-ER YEAR BUILT: 1994 SPEED: 7500 SH/H MAX SHEET SIZE: 103 X 72 CM AVAILABILITY: IMMEDIATELY CONDITION: GOOD PRICE: ON TECHNICAL REQUEST SPEZIFICATION: &ACIRC;?&CENT; CENTERLINE &ACIRC;?&CENT; NON-STOP FEEDER & DELIVERY &ACIRC;?&CENT; DOUBLE SHEET CONTROL &ACIRC;?&CENT; ONE STRIPPING FRAME, ONE UNIVERSAL LOWER BLANKING FRAME, 2 CUTTING FRAME &ACIRC;?&CENT; MAX SPEED OF 7500 SHEETS/HOUR &ACIRC;?&CENT; TOTAL HOURS FUNCTIONS 35865
Vendedor: PP Lion Trade e.K.
Año de construcción: usado
Ubicación: Land-<strong>state: machine will be refurbished
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> STATE: MACHINE WILL BE REFURBISHED IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-
machine type machining center - vertical make doosan daewoo type nm 410 hs year 2008 control type cnc storage france origin korrea delivery immediately cargo base factory technical details

longitudinal 762 mm 410 mm, transverse vertical 510 mm tool changer 30 pos. 
maximum tool length 300 mm tool diameter 80 mm max werkzeugdurch. free neighboring box. 130 mm rapid traverse 48 m/min weight approx. 5 t power 100% ed 11 kw 40% ed 18 kw speed range 20000 1 rpm tool holder sk 40 top 920 x 430 mm admissible load (table center) 600 kg keyway width 18 mm number of grooves 4 pcs 
additional information

fanuc21 i el mb series. handwheel,
 chip conveyor 20000 rpm rpm
 magazine 30 specialized atc bt 40 cooling through the spindle 20 bars
 table 920 x 430 mm

all prices plus vat vat. 
 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE DOOSAN DAEWOO TYPE NM 410 HS YEAR 2008 CONTROL TYPE CNC STORAGE FRANCE ORIGIN KORREA DELIVERY IMMEDIATELY CARGO BASE FACTORY TECHNICAL DETAILS LONGITUDINAL 762 MM 410 MM, TRANSVERSE VERTICAL 510 MM TOOL CHANGER 30 POS. MAXIMUM TOOL LENGTH 300 MM TOOL DIAMETER 80 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 130 MM RAPID TRAVERSE 48 M/MIN WEIGHT APPROX. 5 T POWER 100% ED 11 KW 40% ED 18 KW SPEED RANGE 20000 1 RPM TOOL HOLDER SK 40 TOP 920 X 430 MM ADMISSIBLE LOAD (TABLE CENTER) 600 KG KEYWAY WIDTH 18 MM NUMBER OF GROOVES 4 PCS ADDITIONAL INFORMATION FANUC21 I EL MB SERIES. HANDWHEEL, CHIP CONVEYOR 20000 RPM RPM MAGAZINE 30 SPECIALIZED ATC BT 40 COOLING THROUGH THE SPINDLE 20 BARS TABLE 920 X 430 MM ALL PRICES PLUS VAT VAT.
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-
- cpc 1-04
- cp tronic
- preset feeder
- alcolor dampening units
- technotrans cooling
- heidelberg autoplate
- perfecting 2/2 or 4/0
- standard wash-up devices
- grafix alphatronic 200 powder spray
- low pile delivery
- plusversion
- 91 mio. impr. - CPC 1-04 - CP TRONIC - PRESET FEEDER - ALCOLOR DAMPENING UNITS - TECHNOTRANS COOLING - HEIDELBERG AUTOPLATE - PERFECTING 2/2 OR 4/0 - STANDARD WASH-UP DEVICES - GRAFIX ALPHATRONIC 200 POWDER SPRAY - LOW PILE DELIVERY - PLUSVERSION - 91 MIO. IMPR.
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 850 mm<br/>z-travel: 600 mm<br/>control: s 840 d <br/>rapid travel x/y/z: 50/50/70 m/min<br/>spindle turning speed - stepless: 30 - 10000 u/min<br/>tool taper: 80 hsk<br/>weight of tools max.: 15 kg<br/>tool length - max.: 400 mm<br/>tension force: 20 kn<br/>tool diameter: 120 (200) mm<br/>total power requirement: 95 kva<br/>weight of the machine ca.: 27 t<br/>dimensions of the machine ca.: 5 x 3 x 3 m<br/>horizontal machining center with 2 spindles and swivable table for a four axes <br/>machining. machine was used for machining of cylinder heads in the automotive <br/>industry (8 cylinder motors). machine has two automatic tool changing magazins <br/>with each 50 places. control: siemens 840 d<br/>additional technical data: a- axes swivel positioning +/- 5 arc seconds. chip <br/>to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 850 MM
Z-TRAVEL: 600 MM
CONTROL: S 840 D
RAPID TRAVEL X/Y/Z: 50/50/70 M/MIN
SPINDLE TURNING SPEED - STEPLESS: 30 - 10000 U/MIN
TOOL TAPER: 80 HSK
WEIGHT OF TOOLS MAX.: 15 KG
TOOL LENGTH - MAX.: 400 MM
TENSION FORCE: 20 KN
TOOL DIAMETER: 120 (200) MM
TOTAL POWER REQUIREMENT: 95 KVA
WEIGHT OF THE MACHINE CA.: 27 T
DIMENSIONS OF THE MACHINE CA.: 5 X 3 X 3 M
HORIZONTAL MACHINING CENTER WITH 2 SPINDLES AND SWIVABLE TABLE FOR A FOUR AXES
MACHINING. MACHINE WAS USED FOR MACHINING OF CYLINDER HEADS IN THE AUTOMOTIVE
INDUSTRY (8 CYLINDER MOTORS). MACHINE HAS TWO AUTOMATIC TOOL CHANGING MAGAZINS
WITH EACH 50 PLACES. CONTROL: SIEMENS 840 D
ADDITIONAL TECHNICAL DATA: A- AXES SWIVEL POSITIONING +/- 5 ARC SECONDS. CHIP
TO CHIP TIME IS UP TO A TOOL WEIGHT OF 4 KG = 4,5 SEC. AND 5 - 15 KG = 7 SEC.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-- cpc 1-04
- cp tronic
- preset feeder
- alcolor dampening units
- technotrans cooling, air cooled
- ink temperature control
- heidelberg autoplate
- standard wash-up devices
- perfecting 2/3 or 5/0
- grafix exatronic plus powder spray
- 129 mio. impr. - CPC 1-04 - CP TRONIC - PRESET FEEDER - ALCOLOR DAMPENING UNITS - TECHNOTRANS COOLING, AIR COOLED - INK TEMPERATURE CONTROL - HEIDELBERG AUTOPLATE - STANDARD WASH-UP DEVICES - PERFECTING 2/3 OR 5/0 - GRAFIX EXATRONIC PLUS POWDER SPRAY - 129 MIO. IMPR.
Vendedor: BOZAL Graphische Maschinen GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 850 mm<br/>z-travel: 600 mm<br/>control: s 840 d <br/>rapid travel x/y/z: 50/50/70 m/min<br/>spindle turning speed - stepless: 30 - 10000 u/min<br/>tool taper: 80 hsk<br/>weight of tools max.: 15 kg<br/>tool length - max.: 400 mm<br/>tension force: 20 kn<br/>tool diameter: 120 (200) mm<br/>total power requirement: 95 kva<br/>weight of the machine ca.: 27 t<br/>dimensions of the machine ca.: 5 x 3 x 3 m<br/>horizontal machining center with 2 spindles and swivable table for a four axes <br/>machining. machine was used for machining of cylinder heads in the automotive <br/>industry (8 cylinder motors). machine has two automatic tool changing magazins <br/>with each 50 places. control: siemens 840 d<br/>additional technical data: a- axes swivel positioning +/- 5 arc seconds. chip <br/>to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 850 MM
Z-TRAVEL: 600 MM
CONTROL: S 840 D
RAPID TRAVEL X/Y/Z: 50/50/70 M/MIN
SPINDLE TURNING SPEED - STEPLESS: 30 - 10000 U/MIN
TOOL TAPER: 80 HSK
WEIGHT OF TOOLS MAX.: 15 KG
TOOL LENGTH - MAX.: 400 MM
TENSION FORCE: 20 KN
TOOL DIAMETER: 120 (200) MM
TOTAL POWER REQUIREMENT: 95 KVA
WEIGHT OF THE MACHINE CA.: 27 T
DIMENSIONS OF THE MACHINE CA.: 5 X 3 X 3 M
HORIZONTAL MACHINING CENTER WITH 2 SPINDLES AND SWIVABLE TABLE FOR A FOUR AXES
MACHINING. MACHINE WAS USED FOR MACHINING OF CYLINDER HEADS IN THE AUTOMOTIVE
INDUSTRY (8 CYLINDER MOTORS). MACHINE HAS TWO AUTOMATIC TOOL CHANGING MAGAZINS
WITH EACH 50 PLACES. CONTROL: SIEMENS 840 D
ADDITIONAL TECHNICAL DATA: A- AXES SWIVEL POSITIONING +/- 5 ARC SECONDS. CHIP
TO CHIP TIME IS UP TO A TOOL WEIGHT OF 4 KG = 4,5 SEC. AND 5 - 15 KG = 7 SEC.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-year of construction: 2008
hours of operation machine: 65.250 h (01.10.2018)
hours of operation a laser: 64.733 h (01.10.2018)
hours of operation a beam: 17.390 h (01.10.2018)
laser power: 4000 watts
work area: 3000 x 1500 x 115 mm
control: siemens sinumerik 840 d bzwckjvc
max steel approximately: 20 mm
max stainless steel approx.: 15 mm
max aluminium approx.: 8 mm
space requirement approx.: 11,650 x 9,000 x 3.566 mm
approximate weight machine: 11,500 kg
power consumption: 88 kva

standard equipment
-closed machine frame with integrated laser unit
-automatic pallet changer
-longitudinal conveyor for small parts/waste
-lighting of workroom
-position laser diode
-programmable cutting gas pressure
-spraying device

trumpf laser
-co2 laser truflow 4000
-maintenance-free ac servo motors
-high-frequency excitation
-programmable power cycles
-laser power control
-logbook function laser
-cooling unit

cutting head
-laser cutting head with 5 "and 7.5" lens
-cutting head quick change facility
-automatic sheet metal outer edge detection
-controlline

control
-control siemens sinumerik 840 d
-automatic switch-off
-microweld
-ease of use
-online help
-integrated e-shop
-diagnosis function
-usb interface
-technical data

security
-light barrier
-multi-chamber exhaust system
-compact collector
-beam guiding completely encapsulated and ventilated
-monitoring system

advanced machine equipment
-pierceline (pc)

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2008 HOURS OF OPERATION MACHINE: 65.250 H (01.10.2018) HOURS OF OPERATION A LASER: 64.733 H (01.10.2018) HOURS OF OPERATION A BEAM: 17.390 H (01.10.2018) LASER POWER: 4000 WATTS WORK AREA: 3000 X 1500 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D BZWCKJVC MAX STEEL APPROXIMATELY: 20 MM MAX STAINLESS STEEL APPROX.: 15 MM MAX ALUMINIUM APPROX.: 8 MM SPACE REQUIREMENT APPROX.: 11,650 X 9,000 X 3.566 MM APPROXIMATE WEIGHT MACHINE: 11,500 KG POWER CONSUMPTION: 88 KVA STANDARD EQUIPMENT -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -AUTOMATIC PALLET CHANGER -LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE -LIGHTING OF WORKROOM -POSITION LASER DIODE -PROGRAMMABLE CUTTING GAS PRESSURE -SPRAYING DEVICE TRUMPF LASER -CO2 LASER TRUFLOW 4000 -MAINTENANCE-FREE AC SERVO MOTORS -HIGH-FREQUENCY EXCITATION -PROGRAMMABLE POWER CYCLES -LASER POWER CONTROL -LOGBOOK FUNCTION LASER -COOLING UNIT CUTTING HEAD -LASER CUTTING HEAD WITH 5 "AND 7.5" LENS -CUTTING HEAD QUICK CHANGE FACILITY -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -CONTROLLINE CONTROL -CONTROL SIEMENS SINUMERIK 840 D -AUTOMATIC SWITCH-OFF -MICROWELD -EASE OF USE -ONLINE HELP -INTEGRATED E-SHOP -DIAGNOSIS FUNCTION -USB INTERFACE -TECHNICAL DATA SECURITY -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -BEAM GUIDING COMPLETELY ENCAPSULATED AND VENTILATED -MONITORING SYSTEM ADVANCED MACHINE EQUIPMENT -PIERCELINE (PC) TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 850 mm<br/>z-travel: 600 mm<br/>control: s 840 d <br/>rapid travel x/y/z: 50/50/70 m/min<br/>spindle turning speed - stepless: 30 - 10000 u/min<br/>tool taper: 80 hsk<br/>weight of tools max.: 15 kg<br/>tool length - max.: 400 mm<br/>tension force: 20 kn<br/>tool diameter: 120 (200) mm<br/>total power requirement: 95 kva<br/>weight of the machine ca.: 27 t<br/>dimensions of the machine ca.: 5 x 3 x 3 m<br/>horizontal machining center with 2 spindles and swivable table for a four axes <br/>machining. machine was used for machining of cylinder heads in the automotive <br/>industry (8 cylinder motors). machine has two automatic tool changing magazins <br/>with each 50 places. control: siemens 840 d<br/>additional technical data: a- axes swivel positioning +/- 5 arc seconds. chip <br/>to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 850 MM
Z-TRAVEL: 600 MM
CONTROL: S 840 D
RAPID TRAVEL X/Y/Z: 50/50/70 M/MIN
SPINDLE TURNING SPEED - STEPLESS: 30 - 10000 U/MIN
TOOL TAPER: 80 HSK
WEIGHT OF TOOLS MAX.: 15 KG
TOOL LENGTH - MAX.: 400 MM
TENSION FORCE: 20 KN
TOOL DIAMETER: 120 (200) MM
TOTAL POWER REQUIREMENT: 95 KVA
WEIGHT OF THE MACHINE CA.: 27 T
DIMENSIONS OF THE MACHINE CA.: 5 X 3 X 3 M
HORIZONTAL MACHINING CENTER WITH 2 SPINDLES AND SWIVABLE TABLE FOR A FOUR AXES
MACHINING. MACHINE WAS USED FOR MACHINING OF CYLINDER HEADS IN THE AUTOMOTIVE
INDUSTRY (8 CYLINDER MOTORS). MACHINE HAS TWO AUTOMATIC TOOL CHANGING MAGAZINS
WITH EACH 50 PLACES. CONTROL: SIEMENS 840 D
ADDITIONAL TECHNICAL DATA: A- AXES SWIVEL POSITIONING +/- 5 ARC SECONDS. CHIP
TO CHIP TIME IS UP TO A TOOL WEIGHT OF 4 KG = 4,5 SEC. AND 5 - 15 KG = 7 SEC.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Precio: 795 €
Ubicación: Land-schneidlstg.: 1100 x 1.0 mm
drive: manual v. hd.
machine weight: 300 kg

equipment / accessories:

rip fence
sheet holders
adjustable length stop

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before making a purchase in our factory.
 SCHNEIDLSTG.: 1100 X 1.0 MM DRIVE: MANUAL V. HD. MACHINE WEIGHT: 300 KG EQUIPMENT / ACCESSORIES: RIP FENCE SHEET HOLDERS ADJUSTABLE LENGTH STOP ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE IN OUR FACTORY.
Vendedor: Czech Industrie Service
Año de construcción: usado
Ubicación: Land-x-travel: 750 mm<br/>y-travel: 850 mm<br/>z-travel: 600 mm<br/>control: s 840 d <br/>rapid travel x/y/z: 50/50/70 m/min<br/>spindle turning speed - stepless: 30 - 10000 u/min<br/>tool taper: 80 hsk<br/>weight of tools max.: 15 kg<br/>tool length - max.: 400 mm<br/>tension force: 20 kn<br/>tool diameter: 120 (200) mm<br/>total power requirement: 95 kva<br/>weight of the machine ca.: 27 t<br/>dimensions of the machine ca.: 5 x 3 x 3 m<br/>horizontal machining center with 2 spindles and swivable table for a four axes <br/>machining. machine was used for machining of cylinder heads in the automotive <br/>industry (8 cylinder motors). machine has two automatic tool changing magazins <br/>with each 50 places. control: siemens 840 d<br/>additional technical data: a- axes swivel positioning +/- 5 arc seconds. chip <br/>to chip time is up to a tool weight of 4 kg = 4,5 sec. and 5 - 15 kg = 7 sec.<br/><br/><br/><br/><br/> X-TRAVEL: 750 MM
Y-TRAVEL: 850 MM
Z-TRAVEL: 600 MM
CONTROL: S 840 D
RAPID TRAVEL X/Y/Z: 50/50/70 M/MIN
SPINDLE TURNING SPEED - STEPLESS: 30 - 10000 U/MIN
TOOL TAPER: 80 HSK
WEIGHT OF TOOLS MAX.: 15 KG
TOOL LENGTH - MAX.: 400 MM
TENSION FORCE: 20 KN
TOOL DIAMETER: 120 (200) MM
TOTAL POWER REQUIREMENT: 95 KVA
WEIGHT OF THE MACHINE CA.: 27 T
DIMENSIONS OF THE MACHINE CA.: 5 X 3 X 3 M
HORIZONTAL MACHINING CENTER WITH 2 SPINDLES AND SWIVABLE TABLE FOR A FOUR AXES
MACHINING. MACHINE WAS USED FOR MACHINING OF CYLINDER HEADS IN THE AUTOMOTIVE
INDUSTRY (8 CYLINDER MOTORS). MACHINE HAS TWO AUTOMATIC TOOL CHANGING MAGAZINS
WITH EACH 50 PLACES. CONTROL: SIEMENS 840 D
ADDITIONAL TECHNICAL DATA: A- AXES SWIVEL POSITIONING +/- 5 ARC SECONDS. CHIP
TO CHIP TIME IS UP TO A TOOL WEIGHT OF 4 KG = 4,5 SEC. AND 5 - 15 KG = 7 SEC.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)