309 ofertas

Año de construcción: usado
Ubicación: Land-control system: engel cc100	
hours in operation: 58604 h	
clamping force: 175 ton	
opening stroke: 700 mm	
mould height : 250 / 700 min/mm	
size of mould plates: 820 x 750 mm	
screw diameter: 50 mm	
injection volume: 318 cm³	
shot capacity: 287 g	
injection pressure: 2360 bar	
machine dimensions:	
1680 x 5650 x 2180 mm	
weight: 11500 kg	
robot interface	
with robot	
                                   CONTROL SYSTEM: ENGEL CC100 HOURS IN OPERATION: 58604 H CLAMPING FORCE: 175 TON OPENING STROKE: 700 MM MOULD HEIGHT : 250 / 700 MIN/MM SIZE OF MOULD PLATES: 820 X 750 MM SCREW DIAMETER: 50 MM INJECTION VOLUME: 318 CM³ SHOT CAPACITY: 287 G INJECTION PRESSURE: 2360 BAR MACHINE DIMENSIONS: 1680 X 5650 X 2180 MM WEIGHT: 11500 KG ROBOT INTERFACE WITH ROBOT
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-make engelsmann, type vt-ksm 2800, no 92.938, new 1983, working pressure vacuum-0,5 bar, test pressure 1 bar, working pressure 20 bar, test pressure 26 bar, working pressure 20 bar, test pressure 26 bar, motor 22 kw, 380 volt, extra specifications with filter, filter surface 1,6 m2, material stainless steel 316, capacity 128 ltr., working pressure vacuum-0,5 bar, test pressure 1 bar, half coil jacketed (9 ltr.), working pressure 20 bar, test pressure 26 barscrew dryersdryers > screw dryers MAKE ENGELSMANN, TYPE VT-KSM 2800, NO 92.938, NEW 1983, WORKING PRESSURE VACUUM-0,5 BAR, TEST PRESSURE 1 BAR, WORKING PRESSURE 20 BAR, TEST PRESSURE 26 BAR, WORKING PRESSURE 20 BAR, TEST PRESSURE 26 BAR, MOTOR 22 KW, 380 VOLT, EXTRA SPECIFICATIONS WITH FILTER, FILTER SURFACE 1,6 M2, MATERIAL STAINLESS STEEL 316, CAPACITY 128 LTR., WORKING PRESSURE VACUUM-0,5 BAR, TEST PRESSURE 1 BAR, HALF COIL JACKETED (9 LTR.), WORKING PRESSURE 20 BAR, TEST PRESSURE 26 BARSCREW DRYERSDRYERS > SCREW DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-we are always looking for used injection moulding machines of manufacturer's angel from model year 1998.    WE ARE ALWAYS LOOKING FOR USED INJECTION MOULDING MACHINES OF MANUFACTURER'S ANGEL FROM MODEL YEAR 1998.
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-rotary valve (1x), make j. engelsmann ag ludwigshafen, type s-200 v2a, no 12418 / df-fds, new unkown, house material stainless steel, rotor material stainless steel, rotor diameter 200mm, rotor width 170mm, inlet dia. 145mm, outlet dia. 160mm, outlet flange sizes dia. 285mm, daylight 295mm, with motor 0,37 kw, 220/380 volt, rotor speed ± 35 rpm, air purged sealings, floorspace 0,9x0,4 m, total height 0,4 m, weight 100 kgrotating valvesrotary valves > rotating valves ROTARY VALVE (1X), MAKE J. ENGELSMANN AG LUDWIGSHAFEN, TYPE S-200 V2A, NO 12418 / DF-FDS, NEW UNKOWN, HOUSE MATERIAL STAINLESS STEEL, ROTOR MATERIAL STAINLESS STEEL, ROTOR DIAMETER 200MM, ROTOR WIDTH 170MM, INLET DIA. 145MM, OUTLET DIA. 160MM, OUTLET FLANGE SIZES DIA. 285MM, DAYLIGHT 295MM, WITH MOTOR 0,37 KW, 220/380 VOLT, ROTOR SPEED ± 35 RPM, AIR PURGED SEALINGS, FLOORSPACE 0,9X0,4 M, TOTAL HEIGHT 0,4 M, WEIGHT 100 KGROTATING VALVESROTARY VALVES > ROTATING VALVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2002 

injection unit: vc 330/...
screw diameter: 35 mm 
injection pressure: 1600 bar 
injection volume: 154 ccm 
shot capacity: 144 g 

clamping unit: .../110
clamping force: 110 t 
platen size: 740 x 680 mm 
distance between tie bars: . mm 
mould height: 300 mm 
opening storke: 500 mm 
max.daylight: 800 mm 
ejector stroke: 130 mm 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 4,4 x 1,5 x 2,1 m 
weight: 7.300 kg 

equipment:
- 2 x core pulls ( extensions to 3 core pulls ) 
- 3 x pneumatic valve
- incl. second injection unit (screw diameter 25 mm) MACHINE SPECIFICATION YEAR: 2002 INJECTION UNIT: VC 330/... SCREW DIAMETER: 35 MM INJECTION PRESSURE: 1600 BAR INJECTION VOLUME: 154 CCM SHOT CAPACITY: 144 G CLAMPING UNIT: .../110 CLAMPING FORCE: 110 T PLATEN SIZE: 740 X 680 MM DISTANCE BETWEEN TIE BARS: . MM MOULD HEIGHT: 300 MM OPENING STORKE: 500 MM MAX.DAYLIGHT: 800 MM EJECTOR STROKE: 130 MM GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 4,4 X 1,5 X 2,1 M WEIGHT: 7.300 KG EQUIPMENT: - 2 X CORE PULLS ( EXTENSIONS TO 3 CORE PULLS ) - 3 X PNEUMATIC VALVE - INCL. SECOND INJECTION UNIT (SCREW DIAMETER 25 MM)
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-sorting sieve (1x), make engelsmann, material stainless steel, number of sieve decks: 2 (2500x220mm), number of fractions: 2x 5 500x220mm), with cover, inlet dia. 100mm, outlet 11x dia. 25mm, motor 0,25 kw, mounted on mild steel frame, with switchgear, floorspace 3,4x0,9 m, total height 2,0 msorting sievessieves > sorting sieves SORTING SIEVE (1X), MAKE ENGELSMANN, MATERIAL STAINLESS STEEL, NUMBER OF SIEVE DECKS: 2 (2500X220MM), NUMBER OF FRACTIONS: 2X 5 500X220MM), WITH COVER, INLET DIA. 100MM, OUTLET 11X DIA. 25MM, MOTOR 0,25 KW, MOUNTED ON MILD STEEL FRAME, WITH SWITCHGEAR, FLOORSPACE 3,4X0,9 M, TOTAL HEIGHT 2,0 MSORTING SIEVESSIEVES > SORTING SIEVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-angel speed 280/70
bj. 2006
screw 60mm ANGEL SPEED 280/70 BJ. 2006 SCREW 60MM
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-sorting sieve free swinging screening machine (1x), make engelsmann a.g. ludwigshafen, type eb-75/2-1/1.4541/gs, new 1987, material stainless steel (1.4541?), sieve surface 0,75 m2, number of sieve decks: 1, number of fractions: 2, sieve sizes 460x1490mm, sieve perforation (suitable for dewatering), with cover, inlet dia. 150mm, outlet 2x dia. 100mm, motor, mach.no. 3469, mounted on mild steel frame, with switch, floorspace 2,2x1,0 m, total height 1,2 msorting sievessieves > sorting sieves SORTING SIEVE FREE SWINGING SCREENING MACHINE (1X), MAKE ENGELSMANN A.G. LUDWIGSHAFEN, TYPE EB-75/2-1/1.4541/GS, NEW 1987, MATERIAL STAINLESS STEEL (1.4541?), SIEVE SURFACE 0,75 M2, NUMBER OF SIEVE DECKS: 1, NUMBER OF FRACTIONS: 2, SIEVE SIZES 460X1490MM, SIEVE PERFORATION (SUITABLE FOR DEWATERING), WITH COVER, INLET DIA. 150MM, OUTLET 2X DIA. 100MM, MOTOR, MACH.NO. 3469, MOUNTED ON MILD STEEL FRAME, WITH SWITCH, FLOORSPACE 2,2X1,0 M, TOTAL HEIGHT 1,2 MSORTING SIEVESSIEVES > SORTING SIEVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-year of construction 1998
clamping force: 250 to.
screw diameter: 60 mm
injection pressure: 2000 bar
stroke volume: 679 cm³
shot weight: 618 g
tie bar distance: 630 x 630 mm
size of platens: 995 x 1050 mm
mould installation height: 330 mm

robot engel of year of manufacture 2002 YEAR OF CONSTRUCTION 1998 CLAMPING FORCE: 250 TO. SCREW DIAMETER: 60 MM INJECTION PRESSURE: 2000 BAR STROKE VOLUME: 679 CM³ SHOT WEIGHT: 618 G TIE BAR DISTANCE: 630 X 630 MM SIZE OF PLATENS: 995 X 1050 MM MOULD INSTALLATION HEIGHT: 330 MM ROBOT ENGEL OF YEAR OF MANUFACTURE 2002
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-sorting sieve (1x), make engelsmann, type e.a.36/4/1.4541/gs, new 1985, material stainless steel, number of fractions: 3, sieve sizes 3x 200x500mm, with cover, inlet dia. 150mm, outlet 4x dia. 150mm, motor, with ball cleaning, mach.no. 3291, on stainless steel frame, floorspace 2,5x1,3 m, total height 2,5 m, weight 650 kgsorting sievessieves > sorting sieves SORTING SIEVE (1X), MAKE ENGELSMANN, TYPE E.A.36/4/1.4541/GS, NEW 1985, MATERIAL STAINLESS STEEL, NUMBER OF FRACTIONS: 3, SIEVE SIZES 3X 200X500MM, WITH COVER, INLET DIA. 150MM, OUTLET 4X DIA. 150MM, MOTOR, WITH BALL CLEANING, MACH.NO. 3291, ON STAINLESS STEEL FRAME, FLOORSPACE 2,5X1,3 M, TOTAL HEIGHT 2,5 M, WEIGHT 650 KGSORTING SIEVESSIEVES > SORTING SIEVES
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-es Spain, 39792 Heras/Cantabria
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-candle filter (1x), make j. engelsmann ag, type stationärer filter, no ka00.13000, new 2001, material stainless steel (1.4571), vessel dia. 700x800mm, bottom 550mm, filter surface 3,0 m2, number of candles 10, candle sizes suitable for dia. 120x800mm, solids outlet dia. 200mm, with outlet valve, without candles, floorspace 1,2x1,0 m, total height 2,2 m, weight 250 kgcandle filtersfilters > candle filters CANDLE FILTER (1X), MAKE J. ENGELSMANN AG, TYPE STATIONäRER FILTER, NO KA00.13000, NEW 2001, MATERIAL STAINLESS STEEL (1.4571), VESSEL DIA. 700X800MM, BOTTOM 550MM, FILTER SURFACE 3,0 M2, NUMBER OF CANDLES 10, CANDLE SIZES SUITABLE FOR DIA. 120X800MM, SOLIDS OUTLET DIA. 200MM, WITH OUTLET VALVE, WITHOUT CANDLES, FLOORSPACE 1,2X1,0 M, TOTAL HEIGHT 2,2 M, WEIGHT 250 KGCANDLE FILTERSFILTERS > CANDLE FILTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete plastizising unit 105 mm engel for 5550 injection unit COMPLETE PLASTIZISING UNIT 105 MM ENGEL FOR 5550 INJECTION UNIT
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-metering screw (1x), make hethon feeder hengelo, type 62-s-00, no 930120288, new unknown, material stainless steel, screw diameter 40mm, with hopper, capacity ± 200 ltr, hopper sizes 600x600x550, inlet dia. 300mm, outlet dia. 110mm, with motor, hopper with flexible wall, floorspace 1,1x0,6 m, total height 1,5 m, weight 220 kgmetering screwsconveyor screws > metering screws METERING SCREW (1X), MAKE HETHON FEEDER HENGELO, TYPE 62-S-00, NO 930120288, NEW UNKNOWN, MATERIAL STAINLESS STEEL, SCREW DIAMETER 40MM, WITH HOPPER, CAPACITY ± 200 LTR, HOPPER SIZES 600X600X550, INLET DIA. 300MM, OUTLET DIA. 110MM, WITH MOTOR, HOPPER WITH FLEXIBLE WALL, FLOORSPACE 1,1X0,6 M, TOTAL HEIGHT 1,5 M, WEIGHT 220 KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-complete plasticizing unit engel 5550 with 105 mm diameter
complete plasticizing unit engel 5550 with 105 mm screw diameter.
injection volumen 3.720 cm3, rev. 101/min1, 22 l/d,  injection rate 168 gems/sec., 1.400/1.600 bar injection pressure,

73 kw heaters, 7 zones. COMPLETE PLASTICIZING UNIT ENGEL 5550 WITH 105 MM DIAMETER COMPLETE PLASTICIZING UNIT ENGEL 5550 WITH 105 MM SCREW DIAMETER. INJECTION VOLUMEN 3.720 CM3, REV. 101/MIN1, 22 L/D, INJECTION RATE 168 GEMS/SEC., 1.400/1.600 BAR INJECTION PRESSURE, 73 KW HEATERS, 7 ZONES.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-decanter (1x), make sharples-alfa laval, type p-3400, no a92-115506, material stainless steel, without motor, max. rotor speed 4000 rpm, mounted on frame, floorspace 2,8x1,8 m, total height 1,1 m, weight 1450 kg, extra specifications -- attentie: staat in engeland --decanterscentrifuges > decanters DECANTER (1X), MAKE SHARPLES-ALFA LAVAL, TYPE P-3400, NO A92-115506, MATERIAL STAINLESS STEEL, WITHOUT MOTOR, MAX. ROTOR SPEED 4000 RPM, MOUNTED ON FRAME, FLOORSPACE 2,8X1,8 M, TOTAL HEIGHT 1,1 M, WEIGHT 1450 KG, EXTRA SPECIFICATIONS -- ATTENTIE: STAAT IN ENGELAND --DECANTERSCENTRIFUGES > DECANTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-engel 110 tons tie-bar-less imm. this machine has new screw and barrel. machine will be delivered complete checked and tested ! ENGEL 110 TONS TIE-BAR-LESS IMM. THIS MACHINE HAS NEW SCREW AND BARREL. MACHINE WILL BE DELIVERED COMPLETE CHECKED AND TESTED !
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-hammer mill (1x), make engelsmann, type mfl 85n/80-e1, no 30223/88, material hastelloy, rotor size dia. 300x150mm, fixed hammers (6x4), motor 24 kw, 380/660 volt, ex, speed 2300 rpm, floorspace 1,7x0,7 m, total height 1,2 m, weight 800 kgsize reduction millsgrinders > size reduction mills HAMMER MILL (1X), MAKE ENGELSMANN, TYPE MFL 85N/80-E1, NO 30223/88, MATERIAL HASTELLOY, ROTOR SIZE DIA. 300X150MM, FIXED HAMMERS (6X4), MOTOR 24 KW, 380/660 VOLT, EX, SPEED 2300 RPM, FLOORSPACE 1,7X0,7 M, TOTAL HEIGHT 1,2 M, WEIGHT 800 KGSIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-300 tons tie-bar-less imm built in 2008 with cc 200 control, integrated engel robot, crane for mould fixing and many extras ! 300 TONS TIE-BAR-LESS IMM BUILT IN 2008 WITH CC 200 CONTROL, INTEGRATED ENGEL ROBOT, CRANE FOR MOULD FIXING AND MANY EXTRAS !
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-decanter (1x), make sharples pennwalt, type p-3400 super-d-canter, no 80-112648 a, material stainless steel, without motor, max. rotor speed 4000 rpm, mounted on frame, floorspace 2,4x1,9 m, total height 1,0 m, weight 1200 kg, extra specifications -- attentie: staat in engeland --decanterscentrifuges > decanters DECANTER (1X), MAKE SHARPLES PENNWALT, TYPE P-3400 SUPER-D-CANTER, NO 80-112648 A, MATERIAL STAINLESS STEEL, WITHOUT MOTOR, MAX. ROTOR SPEED 4000 RPM, MOUNTED ON FRAME, FLOORSPACE 2,4X1,9 M, TOTAL HEIGHT 1,0 M, WEIGHT 1200 KG, EXTRA SPECIFICATIONS -- ATTENTIE: STAAT IN ENGELAND --DECANTERSCENTRIFUGES > DECANTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-350 tons engel tie-bar-less injection moulding machine. screw diam. 80 mm. integrated engel robot model erc 83/2 c.
this machine will be delivered complete checked, repaired and testet and can be shown under power !

350 TONS ENGEL TIE-BAR-LESS INJECTION MOULDING MACHINE. SCREW DIAM. 80 MM. INTEGRATED ENGEL ROBOT MODEL ERC 83/2 C. THIS MACHINE WILL BE DELIVERED COMPLETE CHECKED, REPAIRED AND TESTET AND CAN BE SHOWN UNDER POWER !
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-decanter (1x), make sharples pennwalt, type p-3400 super-d-canter, no 80-112648 c, material stainless steel, without motor, max. rotor speed 4000 rpm, mounted on frame, floorspace 2,3x1,0 m, total height 1,1 m, weight 1100 kg, extra specifications -- attentie: staat in engeland --decanterscentrifuges > decanters DECANTER (1X), MAKE SHARPLES PENNWALT, TYPE P-3400 SUPER-D-CANTER, NO 80-112648 C, MATERIAL STAINLESS STEEL, WITHOUT MOTOR, MAX. ROTOR SPEED 4000 RPM, MOUNTED ON FRAME, FLOORSPACE 2,3X1,0 M, TOTAL HEIGHT 1,1 M, WEIGHT 1100 KG, EXTRA SPECIFICATIONS -- ATTENTIE: STAAT IN ENGELAND --DECANTERSCENTRIFUGES > DECANTERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-400 to tie-bar-less engel injection moulding machine with only approx. 38.900 working hours. engel integrated robot included. this machine has a acumulator for injection. machine will be delivered complete checked and tested at our workshop and can be shown under power ! 400 TO TIE-BAR-LESS ENGEL INJECTION MOULDING MACHINE WITH ONLY APPROX. 38.900 WORKING HOURS. ENGEL INTEGRATED ROBOT INCLUDED. THIS MACHINE HAS A ACUMULATOR FOR INJECTION. MACHINE WILL BE DELIVERED COMPLETE CHECKED AND TESTED AT OUR WORKSHOP AND CAN BE SHOWN UNDER POWER !
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-decanter (1x), make sharples, type p-2000, no 74-110961, material stainless steel, motor 11,0 kw, 380/660 volt, mounted on frame, floorspace 1,7x1,6 m, total height 1,1 m, weight 1150 kg, extra specifications -- attentie: staat in engeland --decantersnew arrivalscentrifuges > decantersnew arrivals DECANTER (1X), MAKE SHARPLES, TYPE P-2000, NO 74-110961, MATERIAL STAINLESS STEEL, MOTOR 11,0 KW, 380/660 VOLT, MOUNTED ON FRAME, FLOORSPACE 1,7X1,6 M, TOTAL HEIGHT 1,1 M, WEIGHT 1150 KG, EXTRA SPECIFICATIONS -- ATTENTIE: STAAT IN ENGELAND --DECANTERSNEW ARRIVALSCENTRIFUGES > DECANTERSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-engel 60 to tie-bar less imm increased clamping force to 800 kn by engel. machine complete checked and tested an with new cast body on clamping side. ENGEL 60 TO TIE-BAR LESS IMM INCREASED CLAMPING FORCE TO 800 KN BY ENGEL. MACHINE COMPLETE CHECKED AND TESTED AN WITH NEW CAST BODY ON CLAMPING SIDE.
Vendedor: Udo Krichbaum TRANSITUS, S.L.
Año de construcción: usado
Ubicación: Land-decanter (1x), make sharples, type p-2000, no pe 2437-3, material stainless steel, without motor, mounted on frame, floorspace 1,6x0,8 m, total height 1,1 m, weight 650 kg, extra specifications -- attentie: staat in engeland --decantersnew arrivalscentrifuges > decantersnew arrivals DECANTER (1X), MAKE SHARPLES, TYPE P-2000, NO PE 2437-3, MATERIAL STAINLESS STEEL, WITHOUT MOTOR, MOUNTED ON FRAME, FLOORSPACE 1,6X0,8 M, TOTAL HEIGHT 1,1 M, WEIGHT 650 KG, EXTRA SPECIFICATIONS -- ATTENTIE: STAAT IN ENGELAND --DECANTERSNEW ARRIVALSCENTRIFUGES > DECANTERSNEW ARRIVALS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-warehouse no.: 	502645
manufacturer: 	engel
typ:	es 2550-400 hl
year of construction:	2005

clamping force:	4000	kn
size of mould plates h:	1300	mm
size of mould plates v:	910	mm
min. mould height:	350	mm
max. open daylight:	1300	mm
opening stroke:	950	mm

screw diameter:	70	mm
swept volume:	1193	ccm
injection pressure:	1820	bar

equipment included
    ? core pulling hydraulically 1x
    ? machine incl. belt conveyor
    ? cee-socket 16a
    ? machine incl. water flow regulator
    ? machine with material hopper
    ? air valve 1x
    ? interface for handling
    ? schuko-socket 10a
    ? anti vibration mounts
    ? machine without hopper loader
    ? machine incl. safety fencing
    ? machine incl. handling 

measures of machine lxbxh:	8.11m x 2.3m x 2.3m
total weight:	30700kg

handling type:	linear handling
manufacturer:	engel
handling weight:	10	kg
control unit:	erc 53/2-e
year of construction:	2005	
stroke x - axis:	700	mm
stroke y - axis:	3320	mm
stroke z - axis:	1600	mm
total measures:	4,20 x 1,40 x 2,40 m m WAREHOUSE NO.: 502645 MANUFACTURER: ENGEL TYP: ES 2550-400 HL YEAR OF CONSTRUCTION: 2005 CLAMPING FORCE: 4000 KN SIZE OF MOULD PLATES H: 1300 MM SIZE OF MOULD PLATES V: 910 MM MIN. MOULD HEIGHT: 350 MM MAX. OPEN DAYLIGHT: 1300 MM OPENING STROKE: 950 MM SCREW DIAMETER: 70 MM SWEPT VOLUME: 1193 CCM INJECTION PRESSURE: 1820 BAR EQUIPMENT INCLUDED ? CORE PULLING HYDRAULICALLY 1X ? MACHINE INCL. BELT CONVEYOR ? CEE-SOCKET 16A ? MACHINE INCL. WATER FLOW REGULATOR ? MACHINE WITH MATERIAL HOPPER ? AIR VALVE 1X ? INTERFACE FOR HANDLING ? SCHUKO-SOCKET 10A ? ANTI VIBRATION MOUNTS ? MACHINE WITHOUT HOPPER LOADER ? MACHINE INCL. SAFETY FENCING ? MACHINE INCL. HANDLING MEASURES OF MACHINE LXBXH: 8.11M X 2.3M X 2.3M TOTAL WEIGHT: 30700KG HANDLING TYPE: LINEAR HANDLING MANUFACTURER: ENGEL HANDLING WEIGHT: 10 KG CONTROL UNIT: ERC 53/2-E YEAR OF CONSTRUCTION: 2005 STROKE X - AXIS: 700 MM STROKE Y - AXIS: 3320 MM STROKE Z - AXIS: 1600 MM TOTAL MEASURES: 4,20 X 1,40 X 2,40 M M
Vendedor: Maschinenhandel Borowski GmbH
Año de construcción: usado
Ubicación: Land-tumbler dryer (1x), make engelsmann a.g. ludwigshafen, type tm-10.000, no 43 589, new 1992, material stainless steel (1.4571), capacity 9700 ltr, diameter 2200mm, length/depth 1996mm, inlet /man hole dia. 600mm, outlet dia. 250mm, working pressure vac/4 bar, test pressure 6,5 bar, with jacket (1500 ltr), jacket material stainl. steel (1.4541), working pressure vac/4 bar, test pressure 6,5 bar, max. temperature 200 degr. c., motor 22,0 kw, 230/400 volt, dryer speed ± 7,5 rpm, mounted on mild steel frame, floorspace 6,10x3,85 m, extra specifications - heating surface 22,0 m2tumbler dryersdryers > tumbler dryers TUMBLER DRYER (1X), MAKE ENGELSMANN A.G. LUDWIGSHAFEN, TYPE TM-10.000, NO 43 589, NEW 1992, MATERIAL STAINLESS STEEL (1.4571), CAPACITY 9700 LTR, DIAMETER 2200MM, LENGTH/DEPTH 1996MM, INLET /MAN HOLE DIA. 600MM, OUTLET DIA. 250MM, WORKING PRESSURE VAC/4 BAR, TEST PRESSURE 6,5 BAR, WITH JACKET (1500 LTR), JACKET MATERIAL STAINL. STEEL (1.4541), WORKING PRESSURE VAC/4 BAR, TEST PRESSURE 6,5 BAR, MAX. TEMPERATURE 200 DEGR. C., MOTOR 22,0 KW, 230/400 VOLT, DRYER SPEED ± 7,5 RPM, MOUNTED ON MILD STEEL FRAME, FLOORSPACE 6,10X3,85 M, EXTRA SPECIFICATIONS - HEATING SURFACE 22,0 M2TUMBLER DRYERSDRYERS > TUMBLER DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-offer / offer: angel victroy 1050/300 (4 pcs).

> bj. / year 2008
> erc robot (4 pcs)
> gb 55mm > accumulator

> for more information please contact me!

> core pull 4 x hydraulically to bap with shut-off valve and pressure relief
> guard widened on operating side
> mould heating 16 control loops including expansion cards
> surcharge for worm s8 incl. rsp with chromium nitride coating mod.
> design variant hv 4 with rule pump (pressure and flow control in closed-loop) for parallel motion sequence, injection and metering performance increases, injecting about battery
> microcomputer cc200 a02 2.810,-windows-oriented visualization on the basis of a
 tft touch-screen colour monitor 15 inch
> temperature control device interface
> interface for fiege hot runner controller
> etc...
 OFFER / OFFER: ANGEL VICTROY 1050/300 (4 PCS). > BJ. / YEAR 2008 > ERC ROBOT (4 PCS) > GB 55MM > ACCUMULATOR > FOR MORE INFORMATION PLEASE CONTACT ME! > CORE PULL 4 X HYDRAULICALLY TO BAP WITH SHUT-OFF VALVE AND PRESSURE RELIEF > GUARD WIDENED ON OPERATING SIDE > MOULD HEATING 16 CONTROL LOOPS INCLUDING EXPANSION CARDS > SURCHARGE FOR WORM S8 INCL. RSP WITH CHROMIUM NITRIDE COATING MOD. > DESIGN VARIANT HV 4 WITH RULE PUMP (PRESSURE AND FLOW CONTROL IN CLOSED-LOOP) FOR PARALLEL MOTION SEQUENCE, INJECTION AND METERING PERFORMANCE INCREASES, INJECTING ABOUT BATTERY > MICROCOMPUTER CC200 A02 2.810,-WINDOWS-ORIENTED VISUALIZATION ON THE BASIS OF A TFT TOUCH-SCREEN COLOUR MONITOR 15 INCH > TEMPERATURE CONTROL DEVICE INTERFACE > INTERFACE FOR FIEGE HOT RUNNER CONTROLLER > ETC...
Vendedor: Lovric Maschinenhandel e.U.
Año de construcción: usado
Ubicación: Land-tumbler dryer (1x), make engelsmann, material stainless steel, capacity 2070 ltr, diameter ± 1200mm, cylindrical length ± 1600mm, inlet dia. 250mm, with jacket, motor 4,0 kw, 220/380 volt, mounted on mild steel frame, floorspace 4,0x2,3 m, total height 2,3 mtumbler dryersdryers > tumbler dryers TUMBLER DRYER (1X), MAKE ENGELSMANN, MATERIAL STAINLESS STEEL, CAPACITY 2070 LTR, DIAMETER ± 1200MM, CYLINDRICAL LENGTH ± 1600MM, INLET DIA. 250MM, WITH JACKET, MOTOR 4,0 KW, 220/380 VOLT, MOUNTED ON MILD STEEL FRAME, FLOORSPACE 4,0X2,3 M, TOTAL HEIGHT 2,3 MTUMBLER DRYERSDRYERS > TUMBLER DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-no. 3667:

1 gebr. tischbohrwerk
fabr. collet & engelhardt, type baker 100 / 110 nu, b. 1978 with 3 axis heidenhain digital display
arb.-ber.: 2000 x 1400 x 1300 mm, power: 7,5 kw

accessories: table 1400 x 900 mm
faceplate

other: spindle diameter 110 mm
spindle retainer for sk 50
the faceplate diameter 530 mm
largest diameter when the plan 1200 mm
spindle speed range 6-1250 rpm
feeds 0.02-10 mm
rapid traverse 2800 mm / min
transverse displacement of the table 2000 mm
drilling depth in one go 710 mm

weight 13.550 kg

NO. 3667: 1 GEBR. TISCHBOHRWERK FABR. COLLET & ENGELHARDT, TYPE BAKER 100 / 110 NU, B. 1978 WITH 3 AXIS HEIDENHAIN DIGITAL DISPLAY ARB.-BER.: 2000 X 1400 X 1300 MM, POWER: 7,5 KW ACCESSORIES: TABLE 1400 X 900 MM FACEPLATE OTHER: SPINDLE DIAMETER 110 MM SPINDLE RETAINER FOR SK 50 THE FACEPLATE DIAMETER 530 MM LARGEST DIAMETER WHEN THE PLAN 1200 MM SPINDLE SPEED RANGE 6-1250 RPM FEEDS 0.02-10 MM RAPID TRAVERSE 2800 MM / MIN TRANSVERSE DISPLACEMENT OF THE TABLE 2000 MM DRILLING DEPTH IN ONE GO 710 MM WEIGHT 13.550 KG
Vendedor: EnTeHa GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tumbler dryer (1x), make engelsmann, no 78409, new 1980, material stainless steel, capacity 2070 ltr, diameter ± 1200mm, cylindrical length ± 1600mm, inlet dia. 250mm, working pressure vacuum, with jacket, working pressure 2 bar, max. temperature 80 degr. c., motor 1,5 kw, 220/380 volt, mounted on mild steel frame, floorspace 3,7x2,3 m, total height 2,3 mtumbler dryersdryers > tumbler dryers TUMBLER DRYER (1X), MAKE ENGELSMANN, NO 78409, NEW 1980, MATERIAL STAINLESS STEEL, CAPACITY 2070 LTR, DIAMETER ± 1200MM, CYLINDRICAL LENGTH ± 1600MM, INLET DIA. 250MM, WORKING PRESSURE VACUUM, WITH JACKET, WORKING PRESSURE 2 BAR, MAX. TEMPERATURE 80 DEGR. C., MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON MILD STEEL FRAME, FLOORSPACE 3,7X2,3 M, TOTAL HEIGHT 2,3 MTUMBLER DRYERSDRYERS > TUMBLER DRYERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection pressure: 140bar, screw diameter: 125mm, number of core pulls: 8, number of hot runner regulation points/ air vents: 18/ 4, operational hours: ca. 100.000h, weight: 61t, including handling suhling, with hardened injection unit adn cascade control, the machine mainly processed pe and pp.  INJECTION PRESSURE: 140BAR, SCREW DIAMETER: 125MM, NUMBER OF CORE PULLS: 8, NUMBER OF HOT RUNNER REGULATION POINTS/ AIR VENTS: 18/ 4, OPERATIONAL HOURS: CA. 100.000H, WEIGHT: 61T, INCLUDING HANDLING SUHLING, WITH HARDENED INJECTION UNIT ADN CASCADE CONTROL, THE MACHINE MAINLY PROCESSED PE AND PP.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-pre-mixer conical screw mixer (1x), make engelsmann, type ksm-9 cbm, no 10 562, new 1985, material stainless steel (1.4541), capacity 12.000 ltr, useful 9.000 ltr, vessel sizes dia. 2100x5050mm, manhole dia. 500mm, inlet dia. 150mm, motor 11/16 kw, 500 volt (ex), speed mixing shaft 3/6 rpm, floorspace 2,2x2,2 m, total height 6,5 m, weight 8500 kg, extra specifications - jacketed screw (120 ltr), working pressure 4 bar (test pressure 5,2 bar)pre-mixersmixers > pre-mixers PRE-MIXER CONICAL SCREW MIXER (1X), MAKE ENGELSMANN, TYPE KSM-9 CBM, NO 10 562, NEW 1985, MATERIAL STAINLESS STEEL (1.4541), CAPACITY 12.000 LTR, USEFUL 9.000 LTR, VESSEL SIZES DIA. 2100X5050MM, MANHOLE DIA. 500MM, INLET DIA. 150MM, MOTOR 11/16 KW, 500 VOLT (EX), SPEED MIXING SHAFT 3/6 RPM, FLOORSPACE 2,2X2,2 M, TOTAL HEIGHT 6,5 M, WEIGHT 8500 KG, EXTRA SPECIFICATIONS - JACKETED SCREW (120 LTR), WORKING PRESSURE 4 BAR (TEST PRESSURE 5,2 BAR)PRE-MIXERSMIXERS > PRE-MIXERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-machine specification

year: 2000 

injection unit: 280/...
screw diameter: 20 mm 
injection pressure: 2000 bar 
injection volume: 280 ccm 
shot capacity: - g 

clamping unit: .../60
clamping force: 60 t 
platen size: 620 x 560 mm 
distance between tie bars: hl mm 
mould height: 400 mm 
opening storke: 450 mm 
max.daylight: 850 mm 
ejector stroke: 100 mm 
drive power of the hydraulic pump: 15 kw 

general information:
delivery time: now 
machine dimensions(m) lxwxh: 3,9 x 3,2 x 3,2 m 
weight: 5.100 kg 

equipment:
- serial number: 40153
- 2 x core pull
- interface for conveyor belt
- 9 x circuits for mould heating
- 3 x expansion cards tt081  with 8x additional circuits
- tft- colour flat screen
- quality monitoring system qualipack i
- min. mould height increased about 100 mm  MACHINE SPECIFICATION YEAR: 2000 INJECTION UNIT: 280/... SCREW DIAMETER: 20 MM INJECTION PRESSURE: 2000 BAR INJECTION VOLUME: 280 CCM SHOT CAPACITY: - G CLAMPING UNIT: .../60 CLAMPING FORCE: 60 T PLATEN SIZE: 620 X 560 MM DISTANCE BETWEEN TIE BARS: HL MM MOULD HEIGHT: 400 MM OPENING STORKE: 450 MM MAX.DAYLIGHT: 850 MM EJECTOR STROKE: 100 MM DRIVE POWER OF THE HYDRAULIC PUMP: 15 KW GENERAL INFORMATION: DELIVERY TIME: NOW MACHINE DIMENSIONS(M) LXWXH: 3,9 X 3,2 X 3,2 M WEIGHT: 5.100 KG EQUIPMENT: - SERIAL NUMBER: 40153 - 2 X CORE PULL - INTERFACE FOR CONVEYOR BELT - 9 X CIRCUITS FOR MOULD HEATING - 3 X EXPANSION CARDS TT081 WITH 8X ADDITIONAL CIRCUITS - TFT- COLOUR FLAT SCREEN - QUALITY MONITORING SYSTEM QUALIPACK I - MIN. MOULD HEIGHT INCREASED ABOUT 100 MM
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-pressure: 80 t<br/>chamfer lenght: 2550 mm<br/>distance between columns: 2050 mm<br/>control: keine <br/>stroke: 250 mm<br/>light barrier: sick <br/>the machine was previously equipped with a cnc control,<br/><br/>now converted to electrically manual operation.<br/>digital display for backgauge.<br/>electrical stroke adjustment<br/>machine is functional and has been used sporadically for the past 15 years,<br/> as previous owner preferred to use a folding machine.<br/>tools included:<br/>1 set of upper tool<br/>1 lower tool (die block)<br/><br/><br/><br/><br/> PRESSURE: 80 T
CHAMFER LENGHT: 2550 MM
DISTANCE BETWEEN COLUMNS: 2050 MM
CONTROL: KEINE
STROKE: 250 MM
LIGHT BARRIER: SICK
THE MACHINE WAS PREVIOUSLY EQUIPPED WITH A CNC CONTROL,

NOW CONVERTED TO ELECTRICALLY MANUAL OPERATION.
DIGITAL DISPLAY FOR BACKGAUGE.
ELECTRICAL STROKE ADJUSTMENT
MACHINE IS FUNCTIONAL AND HAS BEEN USED SPORADICALLY FOR THE PAST 15 YEARS,
AS PREVIOUS OWNER PREFERRED TO USE A FOLDING MACHINE.
TOOLS INCLUDED:
1 SET OF UPPER TOOL
1 LOWER TOOL (DIE BLOCK)




Vendedor: WeMa A. Pigge GmbH
Año de construcción: usado
Ubicación: Land-machine specification

year: 1998 
control unit: cc 100 

injection unit: 1350/...
screw diameter: 90 mm 
injection pressure: 1910 bar 
injection volume: 2480 ccm 
shot capacity: 2256 g 

clamping unit: .../1200
clamping force: 1200 t 
platen size: 1990 x 1740 mm 
distance between tie bars: 1400 x 1150 mm 
mould height: 500...1200 mm 
opening storke: 1100 mm 
max.daylight: 2300 mm 
ejector stroke: 300 mm 
general information:
delivery time: now 
weight: 78.000 kg 

equipment:
optional: 2 component machine, additional screw: 70 mm diameter
cascade 8-times pneumatic
cascade 8-times hydraulic
32 zone hotrunner controller  MACHINE SPECIFICATION YEAR: 1998 CONTROL UNIT: CC 100 INJECTION UNIT: 1350/... SCREW DIAMETER: 90 MM INJECTION PRESSURE: 1910 BAR INJECTION VOLUME: 2480 CCM SHOT CAPACITY: 2256 G CLAMPING UNIT: .../1200 CLAMPING FORCE: 1200 T PLATEN SIZE: 1990 X 1740 MM DISTANCE BETWEEN TIE BARS: 1400 X 1150 MM MOULD HEIGHT: 500...1200 MM OPENING STORKE: 1100 MM MAX.DAYLIGHT: 2300 MM EJECTOR STROKE: 300 MM GENERAL INFORMATION: DELIVERY TIME: NOW WEIGHT: 78.000 KG EQUIPMENT: OPTIONAL: 2 COMPONENT MACHINE, ADDITIONAL SCREW: 70 MM DIAMETER CASCADE 8-TIMES PNEUMATIC CASCADE 8-TIMES HYDRAULIC 32 ZONE HOTRUNNER CONTROLLER
Vendedor: EuropNet GmbH
Año de construcción: usado
Ubicación: Land-air volume: 30 m³/h<br/>temperature max.: 150 ° c<br/>material hopper volume: 60 l<br/>dew point of the dry air: -70 ° c<br/>blower power: 0,4 kw<br/>heating capacity: 2 kw<br/>connected load: 4,5 kw<br/>dimension l x w x h: 1.000 x 660 x 1.700 mm<br/>weight: 98 + 65 kg<br/>supply voltage: 400v/ 50 hz <br/>painting: edelstahl / engel grün <br/>techn. data      : according to the data sheet:  <br/>condition        : as good as new:  <br/>:  <br/>mobile dehumidifying dryer,<br/>equipped with:<br/>- 80 l stainless steel  hopper + visualized temperature display<br/>- hopper supporting frame with wheels<br/>- insulated suction box<br/><br/>fair unit as well<br/><br/>the technology used for this series of dryers is based on the x dryer: this <br/>means high performance with efficiency up to -70°c dew point. the special <br/>thermodynamic design uses zeolite with low energy consumption and high <br/>throughput efficiency. a powerful microprocessor controls the sincro range. <br/>the sx dryers use solid state relays and adjustable pid temperature control, <br/>they do not use compressed air or cooling water. master 200 completes the <br/>equipment and simplifies the user interface.<br/><br/><br/><br/><br/> AIR VOLUME: 30 M³/H
TEMPERATURE MAX.: 150 ° C
MATERIAL HOPPER VOLUME: 60 L
DEW POINT OF THE DRY AIR: -70 ° C
BLOWER POWER: 0,4 KW
HEATING CAPACITY: 2 KW
CONNECTED LOAD: 4,5 KW
DIMENSION L X W X H: 1.000 X 660 X 1.700 MM
WEIGHT: 98 + 65 KG
SUPPLY VOLTAGE: 400V/ 50 HZ
PAINTING: EDELSTAHL / ENGEL GRüN
TECHN. DATA : ACCORDING TO THE DATA SHEET:
CONDITION : AS GOOD AS NEW:
:
MOBILE DEHUMIDIFYING DRYER,
EQUIPPED WITH:
- 80 L STAINLESS STEEL HOPPER + VISUALIZED TEMPERATURE DISPLAY
- HOPPER SUPPORTING FRAME WITH WHEELS
- INSULATED SUCTION BOX

FAIR UNIT AS WELL

THE TECHNOLOGY USED FOR THIS SERIES OF DRYERS IS BASED ON THE X DRYER: THIS
MEANS HIGH PERFORMANCE WITH EFFICIENCY UP TO -70°C DEW POINT. THE SPECIAL
THERMODYNAMIC DESIGN USES ZEOLITE WITH LOW ENERGY CONSUMPTION AND HIGH
THROUGHPUT EFFICIENCY. A POWERFUL MICROPROCESSOR CONTROLS THE SINCRO RANGE.
THE SX DRYERS USE SOLID STATE RELAYS AND ADJUSTABLE PID TEMPERATURE CONTROL,
THEY DO NOT USE COMPRESSED AIR OR COOLING WATER. MASTER 200 COMPLETES THE
EQUIPMENT AND SIMPLIFIES THE USER INTERFACE.




Vendedor: NORTEC MASCHINENTECHNIK GMBH
Año de construcción: usado
Ubicación: Land-thermoformeusse pozzo 
format : 700x500mm
année : 1995
emboutissage: 280 mm
équipée d'un massicot

elle est adaptée au prototypage, petites et moyennes series
utilisation de toutes les matières thermoformables

machine pour la production de pièces plastiques comme :
-emballage legers, blisters
emballages pharmaceutiques
emballages alimentaires
plateaux de manutention
callages techniques et robotiques
presentoirs pour plv
capots de machines
skin pack


illig, kiefel, arburg, battenfeld, billion, demag, dk, engel, fischer, husky, ads, krauss maffei, margarit, negri bossi, netstal, sandretto, windsor, amut, andouard, baston, samafor, tecnova, vobau, illig, cb concept, automa, bekum, krupp, magic, mag, putian, sipa,uniloy comec etc.

snvi energy graphic sasu
siÈge social : 22 rue du camp - 93230 romainville - france 
tel : 01 57 14 99 19 / mobile : 06 88 07 09 64  

 THERMOFORMEUSSE POZZO FORMAT : 700X500MM ANNéE : 1995 EMBOUTISSAGE: 280 MM éQUIPéE D'UN MASSICOT ELLE EST ADAPTéE AU PROTOTYPAGE, PETITES ET MOYENNES SERIES UTILISATION DE TOUTES LES MATIèRES THERMOFORMABLES MACHINE POUR LA PRODUCTION DE PIèCES PLASTIQUES COMME : -EMBALLAGE LEGERS, BLISTERS EMBALLAGES PHARMACEUTIQUES EMBALLAGES ALIMENTAIRES PLATEAUX DE MANUTENTION CALLAGES TECHNIQUES ET ROBOTIQUES PRESENTOIRS POUR PLV CAPOTS DE MACHINES SKIN PACK ILLIG, KIEFEL, ARBURG, BATTENFELD, BILLION, DEMAG, DK, ENGEL, FISCHER, HUSKY, ADS, KRAUSS MAFFEI, MARGARIT, NEGRI BOSSI, NETSTAL, SANDRETTO, WINDSOR, AMUT, ANDOUARD, BASTON, SAMAFOR, TECNOVA, VOBAU, ILLIG, CB CONCEPT, AUTOMA, BEKUM, KRUPP, MAGIC, MAG, PUTIAN, SIPA,UNILOY COMEC ETC. SNVI ENERGY GRAPHIC SASU SIÈGE SOCIAL : 22 RUE DU CAMP - 93230 ROMAINVILLE - FRANCE TEL : 01 57 14 99 19 / MOBILE : 06 88 07 09 64
Vendedor: SNVI ENERGY
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 6800 kg<br/>dimensions (l x w x h) approx.: 6000 x 1500 x 2000 mm<br/>description: engel es 600/100 injection moulding machine  <b>general <,/ b>, - maximum shot weight 0,226 kg - ps penetration possible - max. injection pressure spec. 1800 bar - increased injection pressure 2400 bar - plastification capacity 0.029 kg / h ps - screw diameter 40 mm - no possibility of vertical injection  nozzle <,/ b>,: - outside diameter 75 mm - height or radius r25 mm - diameter bore 2 mm - no shut-off valve  tool dimensions <,/ b>, - mold height minimum / maximum 150/420 mm - opening length 420 mm - mounting plate horizontal / vertical 640 x 635 mm - diam. centering ring front / rear 125/125 mm - holm distance horizontal / vertical 420 x 420 mm - cores: 2 pieces, with time control  ejector <,/ b>, - ejector pins stroke 130 mm - diameter holes 20 mm - quick change system robot polytec plastics nl</b> WEIGHT APPROX.: 6800 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 1500 X 2000 MM
DESCRIPTION: ENGEL ES 600/100 INJECTION MOULDING MACHINE GENERAL <,/ B>, - MAXIMUM SHOT WEIGHT 0,226 KG - PS PENETRATION POSSIBLE - MAX. INJECTION PRESSURE SPEC. 1800 BAR - INCREASED INJECTION PRESSURE 2400 BAR - PLASTIFICATION CAPACITY 0.029 KG / H PS - SCREW DIAMETER 40 MM - NO POSSIBILITY OF VERTICAL INJECTION NOZZLE <,/ B>,: - OUTSIDE DIAMETER 75 MM - HEIGHT OR RADIUS R25 MM - DIAMETER BORE 2 MM - NO SHUT-OFF VALVE TOOL DIMENSIONS <,/ B>, - MOLD HEIGHT MINIMUM / MAXIMUM 150/420 MM - OPENING LENGTH 420 MM - MOUNTING PLATE HORIZONTAL / VERTICAL 640 X 635 MM - DIAM. CENTERING RING FRONT / REAR 125/125 MM - HOLM DISTANCE HORIZONTAL / VERTICAL 420 X 420 MM - CORES: 2 PIECES, WITH TIME CONTROL EJECTOR <,/ B>, - EJECTOR PINS STROKE 130 MM - DIAMETER HOLES 20 MM - QUICK CHANGE SYSTEM ROBOT POLYTEC PLASTICS NL
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-engel injection moulding machine mod es 200-40 hl / bj. 94 / 400 kn / snails ã? dosage 140 / slugs 20-480, 30 mm / stroke volume 98 cmâ³ / nozzle way 200 mm / spraying pressure 1450-2000 bar / hours: 98,000 / sprue picker / good condition
fe.gi.maschinen.sbg.at

angel injection molding machine mod es 200-40 hl / year 94 / 400 kn / screws ã? 30 mm / overtook 140 / screws 20-480 / stroke volume 98 cmâ³ / nozzle path 200 mm / injection pressure 1450-2000 bar / hours: picker 98,000 / gate / good condition
fe.gi.maschinen.sbg.at ENGEL INJECTION MOULDING MACHINE MOD ES 200-40 HL / BJ. 94 / 400 KN / SNAILS &ATILDE;? DOSAGE 140 / SLUGS 20-480, 30 MM / STROKE VOLUME 98 CM&ACIRC;&SUP3; / NOZZLE WAY 200 MM / SPRAYING PRESSURE 1450-2000 BAR / HOURS: 98,000 / SPRUE PICKER / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT ANGEL INJECTION MOLDING MACHINE MOD ES 200-40 HL / YEAR 94 / 400 KN / SCREWS &ATILDE;? 30 MM / OVERTOOK 140 / SCREWS 20-480 / STROKE VOLUME 98 CM&ACIRC;&SUP3; / NOZZLE PATH 200 MM / INJECTION PRESSURE 1450-2000 BAR / HOURS: PICKER 98,000 / GATE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-pressure: 160 t<br/>chamfer lenght: 3100 mm<br/>distance between columns: 2560 mm<br/>stroke: 400 mm<br/>ajustment speed: 100,0 mm/sec<br/>working feed: 13,0 mm/sec<br/>return speed: 130 mm/sec<br/>oil volume: 350 ltr.<br/>operating pressure: 280 bar<br/>total power requirement: 18,5 kw<br/>weight of the machine ca.: 14.300 kg.<br/>range l-w-h: 3.700 x 2.300 x 3.360 mm<br/><br/><br/><br/><br/> PRESSURE: 160 T
CHAMFER LENGHT: 3100 MM
DISTANCE BETWEEN COLUMNS: 2560 MM
STROKE: 400 MM
AJUSTMENT SPEED: 100,0 MM/SEC
WORKING FEED: 13,0 MM/SEC
RETURN SPEED: 130 MM/SEC
OIL VOLUME: 350 LTR.
OPERATING PRESSURE: 280 BAR
TOTAL POWER REQUIREMENT: 18,5 KW
WEIGHT OF THE MACHINE CA.: 14.300 KG.
RANGE L-W-H: 3.700 X 2.300 X 3.360 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-engel injection moulding machine mod es 200-40 hl / bj. 94 / 400 kn / snails ã? dosage 140 / slugs 20-480, 30 mm / stroke volume 98 cmâ³ / nozzle way 200 mm / spraying pressure 1450-2000 bar / hours: 98,000 / sprue picker / good condition
fe.gi.maschinen.sbg.at

angel injection molding machine mod es 200-40 hl / year 94 / 400 kn / screws ã? 30 mm / overtook 140 / screws 20-480 / stroke volume 98 cmâ³ / nozzle path 200 mm / injection pressure 1450-2000 bar / hours: picker 98,000 / gate / good condition
fe.gi.maschinen.sbg.at ENGEL INJECTION MOULDING MACHINE MOD ES 200-40 HL / BJ. 94 / 400 KN / SNAILS &ATILDE;? DOSAGE 140 / SLUGS 20-480, 30 MM / STROKE VOLUME 98 CM&ACIRC;&SUP3; / NOZZLE WAY 200 MM / SPRAYING PRESSURE 1450-2000 BAR / HOURS: 98,000 / SPRUE PICKER / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT ANGEL INJECTION MOLDING MACHINE MOD ES 200-40 HL / YEAR 94 / 400 KN / SCREWS &ATILDE;? 30 MM / OVERTOOK 140 / SCREWS 20-480 / STROKE VOLUME 98 CM&ACIRC;&SUP3; / NOZZLE PATH 200 MM / INJECTION PRESSURE 1450-2000 BAR / HOURS: PICKER 98,000 / GATE / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-pressure:80 t<br/>chamfer lenght:2550 mm<br/>distance between columns:2060 mm<br/>control:dnc 800 <br/>back stop - adjustable:1000 mm<br/>table width:240 mm<br/>column arm:250 mm<br/>stroke max.:200 mm<br/>dayligth:450 mm<br/>stroke speed - idle stroke downwards:120 mm/s<br/>stroke speed - under load:14 mm/s<br/>stroke speed - idle stroke upwards:105 mm/s<br/>operating pressure:235 bar<br/>quantity of oil:250 l<br/>total power requirement:11 kw<br/>weight of the machine ca.:6,5 t<br/>dimensions of the machine ca.:3,0 x 2,0 x 2,9 m<br/><br/> PRESSURE:80 T
CHAMFER LENGHT:2550 MM
DISTANCE BETWEEN COLUMNS:2060 MM
CONTROL:DNC 800
BACK STOP - ADJUSTABLE:1000 MM
TABLE WIDTH:240 MM
COLUMN ARM:250 MM
STROKE MAX.:200 MM
DAYLIGTH:450 MM
STROKE SPEED - IDLE STROKE DOWNWARDS:120 MM/S
STROKE SPEED - UNDER LOAD:14 MM/S
STROKE SPEED - IDLE STROKE UPWARDS:105 MM/S
OPERATING PRESSURE:235 BAR
QUANTITY OF OIL:250 L
TOTAL POWER REQUIREMENT:11 KW
WEIGHT OF THE MACHINE CA.:6,5 T
DIMENSIONS OF THE MACHINE CA.:3,0 X 2,0 X 2,9 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-weight: 7400 kg
preassure: 160 bar WEIGHT: 7400 KG PREASSURE: 160 BAR
Vendedor: BASTA
Año de construcción: usado
Ubicación: Land-pressure:160 t<br/>chamfer lenght:3800 mm<br/>distance between columns:3250 mm<br/>table width:240 mm<br/>stroke:250 mm<br/>dayligth:500 / 760 mm<br/>ajustment speed:90 mm/sec<br/>working feed:11 mm/sec<br/>return speed:90 mm/sec<br/>oil volume:400 ltr.<br/>operating pressure:205 bar<br/>total power requirement:ca. 23 kw<br/>weight of the machine ca.:17,5 t<br/>dimensions of the machine ca.:6,0 x 3,3 x 3,5 m<br/><br/> PRESSURE:160 T
CHAMFER LENGHT:3800 MM
DISTANCE BETWEEN COLUMNS:3250 MM
TABLE WIDTH:240 MM
STROKE:250 MM
DAYLIGTH:500 / 760 MM
AJUSTMENT SPEED:90 MM/SEC
WORKING FEED:11 MM/SEC
RETURN SPEED:90 MM/SEC
OIL VOLUME:400 LTR.
OPERATING PRESSURE:205 BAR
TOTAL POWER REQUIREMENT:CA. 23 KW
WEIGHT OF THE MACHINE CA.:17,5 T
DIMENSIONS OF THE MACHINE CA.:6,0 X 3,3 X 3,5 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-pressure:250 t<br/>chamfer lenght:4750 mm<br/>distance between columns:3560 mm<br/>stroke:500 mm<br/>table width:400 mm<br/>column arm:320 mm<br/>return speed:85 mm/sec<br/>working feed:10 mm/sec<br/>control:cybelec dnc 70 <br/>total power requirement: kw<br/>weight of the machine ca.:30,0 t<br/>dimensions of the machine ca.:5,5 x 2,4 x 3,6 m<br/><br/> PRESSURE:250 T
CHAMFER LENGHT:4750 MM
DISTANCE BETWEEN COLUMNS:3560 MM
STROKE:500 MM
TABLE WIDTH:400 MM
COLUMN ARM:320 MM
RETURN SPEED:85 MM/SEC
WORKING FEED:10 MM/SEC
CONTROL:CYBELEC DNC 70
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.:30,0 T
DIMENSIONS OF THE MACHINE CA.:5,5 X 2,4 X 3,6 M

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-angel e-motion 440/180 / elektrsiche machine
year of construction: 2005

injection unit:
screw diameter: 40 mm
injection pressure: 1930 bar
dispensing volume: 220 cc

clamping unit:
clamping force: 180 tonnes
tie bar distance: 0 x 0 mm
clamping plate sizes: 970 x 750 mm
ejector: hydraulic
clamping unit: knee lever

control: ec 200 - touch screen

additional equipment:
tie machine
electrically driven machine with servomotoeren; energy-saving, hochtoruge and quiet
control with hydraulic core pulling
control hot-channel x 24
injection unit cured - bi
central lubrication system
the integrated system for quality control of pressure by mark kistler - control of tool pressure
it is possible to change the screw diameter for fi 45 mm or 50 mm

dimensions:
weight: 15300 kg
length/width/height: 5.80 x 2.00 x 2.20 m

drive:
pump/motor: 0 kw
heating power: 9 kw
total power: 0 kw

price: on request
ANGEL E-MOTION 440/180 / ELEKTRSICHE MACHINE YEAR OF CONSTRUCTION: 2005 INJECTION UNIT: SCREW DIAMETER: 40 MM INJECTION PRESSURE: 1930 BAR DISPENSING VOLUME: 220 CC CLAMPING UNIT: CLAMPING FORCE: 180 TONNES TIE BAR DISTANCE: 0 X 0 MM CLAMPING PLATE SIZES: 970 X 750 MM EJECTOR: HYDRAULIC CLAMPING UNIT: KNEE LEVER CONTROL: EC 200 - TOUCH SCREEN ADDITIONAL EQUIPMENT: TIE MACHINE ELECTRICALLY DRIVEN MACHINE WITH SERVOMOTOEREN; ENERGY-SAVING, HOCHTORUGE AND QUIET CONTROL WITH HYDRAULIC CORE PULLING CONTROL HOT-CHANNEL X 24 INJECTION UNIT CURED - BI CENTRAL LUBRICATION SYSTEM THE INTEGRATED SYSTEM FOR QUALITY CONTROL OF PRESSURE BY MARK KISTLER - CONTROL OF TOOL PRESSURE IT IS POSSIBLE TO CHANGE THE SCREW DIAMETER FOR FI 45 MM OR 50 MM DIMENSIONS: WEIGHT: 15300 KG LENGTH/WIDTH/HEIGHT: 5.80 X 2.00 X 2.20 M DRIVE: PUMP/MOTOR: 0 KW HEATING POWER: 9 KW TOTAL POWER: 0 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-manufacturer: engel verstellmotor geräteträger, year: 1994, type: serie a/gnm 4150-b5.2, volt/hz: 42/3,1 mpere, pm: 3000, year :1994 MANUFACTURER: ENGEL VERSTELLMOTOR GERäTETRäGER, YEAR: 1994, TYPE: SERIE A/GNM 4150-B5.2, VOLT/HZ: 42/3,1 MPERE, PM: 3000, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)