ercolina todas las categorias

Ubicación: WORKING HOURS: 30 H TABLE FOR 3D BENDS BENDING RADIUS: R10-R260 BENDING ANGLE: 210 MOTOR POWER: 1100 WATT ELECTRICITY: 230 V BENDING CAPACITY: TUBES 42X3 MM STANDARD STEEL – 42X2.5 MM STAINLESS STEEL 35X35X3 MM STANDARD STEEL SQUARE PROFILE FULL: 25X25 MM DIMENSIONS WITHOUT 3D TABLE: 410X1000X570 MM 3D TABLE: 3000X1000X500 MM THE BENDING ANGLE IS DETERMINED NUMERICALLY MEMORY FOR 10 PROGRAMS - UP TO 9 SHEETS EACH ACCESSORIES: BENDING ROLLS: 25 MM R 50

Ubicación: : 38 X 1,5 MM
: 38 X 1,5 MM
: 35 X 3 MM
: 30 X 2 MM
: 35 X 1,5 MM
: 42 X 1,5 MM
: 42 X 1,5 MM
: 50 X 2 MM
: 50 X 2 MM
: 50 X 4 MM
: 20 MM
: 180 °
: 300 MM
: 245 MM
: 320 MM
: 23 KG
DIGITAL PRESETING OF BENDING ANGLE 0 - 180° 
ONE PHASE MOTOR 220 V/ 900 WATT 
ELECTRICAL MOTOR BRAKE 
OVERLOAD SIGNAL LAMP 
STAND MADE OF CAST IRON 
PREPARED FOR FIXING ON A TRIPOD (NOT INCLUDED)
90° BENDING IN 6 SEC.

OPTIONS AIGAINST ADDITIONAL PRICE:

TRIPOD ? 170,-

MACHINE WITH TOOL KIT FOR TUBES   MD070MKGS ? 3.400,-
½?GAS R46,  ¾?GAS R56,  1?GAS R82

MAXIMUM TUBE DIAMETER:
STANDARD STEEL TUBE: 38 X 1,5 MM
GAS TUBE: 1", X 3,4
FURNITURE TUBE: 38 X 1,5 MM
ST35 HYDRAULIC TUBE: 35 X 3 MM
STAINLESS STEEL TUBE AISI304-316: 30 X 2 MM
STAINLESS STEEL TUBE AISI308 (FOOD INDUSTRY): 35 X 1,5 MM
SOFT BRASS: 42 X 1,5 MM
HARD COPPER AND ALUMINIUM: 42 X 1,5 MM
SOFT COPPER: 50 X 2 MM
CONDUIT-TUBES (TAZ): 50 X 2 MM
MEPLA, GEBEREIT AND SIMILAR TUBES: 50 X 4 MM
ROUND BAR: 20 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR: 220V / 0,9 KW
LENGTH: 300 MM
WIDTH: 245 MM
HEIGHT: 320 MM
WEIGHT: 23 KG

Ubicación: : 60 X 2 Ø MM
: 50 X 2 Ø MM
: 64 X 2 Ø MM
: 40 X 40 X 3 Ø MM
: 64 MM
: 200 MM
: 20 MM
: 180 °
: 3,5 KW
: 50 L
: 1.118 MM
: 8.130 MM
: 2.100 MM
: 600 KG
WITH MANDREL 3 M LENGTH
TWO BENDING SPEEDS
PROGRAMMABLE BEND SEQUENCING AND MANDREL RETRACTION
INDEPENDENT CLAMP AND PRESSURE DIE ADJUSTMENT
MICROMETER WIPER DIE ADJUSTMENT
SECONDARY HYDRAULIC PRESSURE DIE STABILIZATION SYSTEM
QUICK CHANGE TOOLING REDUCES SET UP TIME
WITH PNEUMATIC MATERIAL CLAMPING AND DRO SYSTEM FOR LINEAR AND ROTATIONAL POSITIONING
BASE MACHINE CONVERTS TO ACCEPT ERCOLINA NON MANDREL TOOLING

ALTERNATIVELY: MODEL WITH MANDREL 6 M LENGTH ? 25.000,--



ROUND TUBE: Ø 60 X 2 MM
PIPE: Ø 1?1/4 X 80 MM
STAINLESS STEEL: Ø 50 X 2 MM
COPPER ALUMINIUM: Ø 64 X 2 MM
SQUARE TUBE: Ø 40 X 40 X 3 MM
RECT. TUBE: Ø 50 X 25 X 3 MM RESPECTIVELY Ø 25 X 50 X 6 MM
MAX. OUTSIDE DIAMETER: 64 MM
MAX. CENTER LINE RADIUS: 200 MM
MIN. CENTER LINE RADIUS: 20 MM
MAX. BENDING ANGLE: 180°
POWER: 3,5 KW
HYDRAULIC OIL CAPACITY: 50 L
LENGTH: 1.118 MM
WIDTH: 8.130 MM
HEIGHT: 2.100 MM
WEIGHT: 600 KG

Ubicación: : 150 X 9 MM
: 150 X 9 MM
: 168,3 X 8,5 MM
: 141,3 X 6,55 MM
: 141,3 X 6,55 MM
: 168,3 X 9 MM
: 168,3 X 9 MM
: 168,3 X 9 MM
: 141,3 X 8 MM
: 150 X 6 MM
: 110 MM
: 90 X 90 MM
: 120 X 60 MM
: 120 X 120 X 10 MM
: 120 X 120 X 8 MM
: 800 MM
: 36 MM
: 15 KW
: 1.000 MM
: 1.475 MM
: 1.900 MM
: 2.700 KG
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGES
QUICK-CHANGE TOOLING SYSTEM
DIGITAL DISPLAY OF BEND ANGLE
MATERIAL SPRING BACK COMPENSATION
REMOTE CONTROL OF BEND, RETURN AND EMERGENCY STOP FUNCTIONS
ACCURATE COUNTERBENDING DIE POSITIONING
HEAVY-DUTY STEEL GEAR CASE
USERS MANAUL

MAX. CAPACITY:
GAS TUBE: 6", GAS X 7,11 MM
STANDARD STEEL TUBE: 150 X 9 MM
FURNITURE TUBE: 150 X 9 MM
FE35 (FOR HYDRAULIC TUBES): 168,3 X 8,5 MM
STAINLESS STEEL AISI304-316: 141,3 X 6,55 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 141,3 X 6,55 MM
BRASS SOFT: 168,3 X 9 MM
HARD COPPER AND ALUMINIUM: 168,3 X 9 MM
SOFT COPPER: 168,3 X 9 MM
CONDUIT-ROHR (TAZ): 141,3 X 8 MM
MEPLA, GEBEREIT AND SIMILAR: 150 X 6 MM
ROUNDBAR SOLID (S275JO): 110 MM
SQUAREBAR SOLID (S275JO): 90 X 90 MM
FLATSTEEL SOLID (S275JO): 120 X 60 MM
SQUARE PROFILE (S275JO): 140 X 70 X 12 MM BZW. 140 X 140 X 6 MM
T-PROFILE (S275JO): 120 X 120 X 10 MM
U-PROFILE (S275JO): 120 X 120 X 8 MM
MAXIMUM BENDING RADIUS: 800 MM
MINIMUM BENDING RADIUS: 36 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 15 KW
LENGTH: 1.000 MM
WIDTH: 1.475 MM
HEIGT: 1.900 MM
WEIGHT: 2.700 KG

Ubicación: : 15 CM³
: 76,2 X 3,2 MM
: 2
: 76,2 X 2,2 MM
: 75,2 X 5,5 X 4 MM
: 70 X 70 X 3 MM
: 50 X 70 X 40 MM
: 70 X 50 X 3 MM
: 254 MM
: 19 MM
: 190 °
: 5 KW
: 4.270 MM
: 900 MM
: 1.550 MM
: 920 KG
WITH MANDREL 3 M LENGTH
CONTROL OFFERS EASY ACCESS TO MANUAL AND AUTO OPERATING MODES, SYSTEM DIAGNOSTICS AND MULTIPLE LANGUAGES
USB FOR UNLIMITED STORAGE OF BEND PROGRAMS, MATERIAL LIBARY AND JOB INFORMATION
INTERACTIVE TOUCH SCREEN DISPLAYS ABSOLUTE (ABS) OR INCREMENTAL (INC) POSITIONING WITH INCH OR METRIC READOUT
PROGRAMMABLE C AXIS WITH MANUAL Y AND B POSITIONING
VARIABLE BENDING SPEED TO 4 RPM WITH AUTO WORK SENSING
INDIVIDUAL MATERIAL SPRING BACK SETTING FOR EVERY BEND ANGLE
PRESSURE DIE WITH AUTO RECAPTURE MINIMIZES DISTANCE BETWEEN BENDS
HEAVY DUTY TAILSTOCK CARRIAGE WITH HYDRAULIC CLAMPING OF WORK PIECE
TAILSTOCK Y AND B POSITION DISPLAY RESETS TO ZERO AFTER EACH BEND FOR EASY SETUP WHIE MAINTAINING ABSOLUTE POSITION
BENDING HEAD ADJUSTS HORIZONTALLY TO MENTAIN CENTERLINE RADIUS OF FORMER
PATENTED FINGER STYLE CLAMPING SYSTEM MINIMIZES DISTANCE BETWEEN BENDS
PRECISION ENCODERS  ON ALL AXES FOR GREATER REPEATABILITY
HEAVY ONE-PIECE STEEL STRUCTURE IMPROVES RIGIDITY AND MINIMIZES VIBRATION
EXTERNALLY MOUNTED GAUGES FOR ADJUSTMENT OF SYSTEM AND CLAMPING PRESSURE
ACCEPTS STANDARD 030 MANDREL TOOLING

ALTERNATIVELY: MODEL WITH MANDREL 6 M LENGTH ? 54.800,--

FLEXION MODULUS: 15 CM³
ROUND TUBE: 76,2 X 3,2 MM
GAS TUBE: 2",
STAINLESS STEEL TUBE: 76,2 X 2,2 MM
COPPER ALUMINIUM: 75,2 X 5,5 X 4 MM
SQUARE TUBE: 70 X 70 X 3 MM
RECT. TUBE EASY WAY: 50 X 70 X 40 MM
RECT. TUBE HARD WAY: 70 X 50 X 3 MM
MAX. BENDING RADIUS: 254 MM
MIN. BENDING RADIUS: 19 MM
MAX. BENDING ANGLE: 190°
SPEED:VARIABLE (25°/SEC.)
POWER: 5 KW
LENGTH: 4.270 MM
WIDTH: 900 MM
HEIGHT: 1.550 MM
WEIGHT: 920 KG

Ubicación: : 100 X 6 MM
: 100 X 6 MM
: 100 X 7,5 MM
: 100 X 3,6 MM
: 100 X 3,6 MM
: 114.3 X 6,3 MM
: 114,3 X 6,3 MM
: 114,3 X 6,3 MM
: 100 X 6 MM
: 100 X 5 MM
: 70 MM
: 60 X 60 MM
: 80 X 40 MM
: 90 X 90 X 6 MM
: 90 X 90 X 6 MM
: 400 MM
: 36 MM
: 2,5 KW
: 850 MM
: 500 MM
: 1.200 MM
: 290 KG
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGES
QUICK-CHANGE TOOLING SYSTEM
DIGITAL DISPLAY OF BEND
MATERIAL SPRING BACK COMPENSATION
REMOTE CONTROL OF BEND, RETURN AND EMERGENCY STOP FUNCTIONS
ACCURATE COUNTERBENDING DIE POSITIONING
FOOTSWITCH
3 HEXAGONAL TOOL HOLDERS
HEAVY-DUTY STEEL GEAR CASE
USERS MANAUL

MAX. CAPACITY:
GAS TUBE: 3", 1/2 GAS X 5,74 MM
STANDARD STEEL TUBE: 100 X 6 MM
FURNITURE TUBE: 100 X 6 MM
FE35 (FOR HYDRAULIC TUBES): 100 X 7,5 MM
STAINLESS STEEL AISI304-316: 100 X 3,6 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 100 X 3,6 MM
BRASS SOFT: 114.3 X 6,3 MM
HARD COPPER AND ALUMINIUM: 114,3 X 6,3 MM
SOFT COPPER: 114,3 X 6,3 MM
CONDUIT-ROHR (TAZ): 100 X 6 MM
MEPLA, GEBEREIT AND SIMILAR: 100 X 5 MM
ROUNDBAR SOLID (S275JO): 70 MM
SQUAREBAR SOLID (S275JO): 60 X 60 MM
FLATSTEEL SOLID (S275JO): 80 X 40 MM
SQUARE PROFILE (S275JO): 100 X 60 X 4 MM BZW. 90 X 90 X 4 MM
T-PROFILE (S275JO): 90 X 90 X 6 MM
U-PROFILE (S275JO): 90 X 90 X 6 MM
MAXIMUM BENDING RADIUS: 400 MM
MINIMUM BENDING RADIUS: 36 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 2,5KW
LENGTH: 850 MM
WIDTH: 500 MM
HEIGT: 1.200 MM
WEIGHT: 290 KG

Ubicación: : 64 X 3 Ø MM
: 60 X 2 Ø MM
: 64 X 4 Ø MM
: 60 X 60 X 4 Ø MM
: 64 MM
: 200 MM
: 20 MM
: 180 °
: 4,2 KW
: 50 L
: 1.118 MM
: 8.130 MM
: 2.100 MM
: 600 KG
WITH MANDREL 3 M LENGTH
NC1 SOFT-TOUCH-CONTROL IN 8 DIFFERENT LANGUAGES
30 PROGRAMS WITH 9 BENDS EACH
EARLY MANDREAL RETURN
MAN. POSITIONING AND TURN OF TUBE WITH MECHANICAL STOPS AND ACCURATE DIGITAL READ-OUT
MACHINE CAN BE USED WITH OR WITHOUT MANDREL
BENDING ANGLE AND BENDING COMPENSATION CAN BE PROGRAMMED
USER MANUAL IN GERMAN AND ENGLISH

ALTERNATIVELY: MODEL WITH MANDREL 6 M LENGTH ? 29.500,--



ROUND TUBE: Ø 64 X 3 MM
PIPE: Ø 2", X 40 MM
STAINLESS STEEL: Ø 60 X 2 MM
COPPER ALUMINIUM: Ø 64 X 4 MM
SQUARE TUBE: Ø 60 X 60 X 4 MM
RECT. TUBE: Ø 40 X 60 X 4 MM RESPECTIVELY Ø 60 X 40 X 3 MM
MAX. OUTSIDE DIAMETER: 64 MM
MAX. CENTER LINE RADIUS: 200 MM
MIN. CENTER LINE RADIUS: 20 MM
MAX. BENDING ANGLE: 180°
POWER: 4,2 KW
HYDRAULIC OIL CAPACITY: 50 L
LENGTH: 1.118 MM
WIDTH: 8.130 MM
HEIGHT: 2.100 MM
WEIGHT: 600 KG

Ubicación: : 76 X 3 MM
: 76 X 3 MM
: 70 X 5 MM
: 70 X 4 MM
: 76 X 1,6 MM
: 76 X 4 MM
: 76 X 6 MM
: 76 X 6 MM
: 73 X 4 MM
: 50 X 4 MM
: 45 MM
: 40 X 40 MM
: 10 X 90 MM
: 60 X 60 X 6 MM
: 50 X 20 X 6 MM
: 380 MM
: 10 MM
: 210 °
: 910 MM
: 680 MM
: 370 MM
: 186 KG
3 PHASE
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGE CAPABILITY
30 PROGRAMS, EACH HAS 9 BENDS
DIGITAL DISPLAY OF BEND
MATERIAL SPRING BACK COMPENSATION
QUICK-CHANGE TOOLING SYSTEM
2 HEXAGONAL TOOL HOLDERS
ACCURATE COUNTERBENDING DIE POSITIONING
FOOTSWITCH
USERS MANUAL


ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODELS:

MG 030T (3 PHASE, VARIABLE SPEED)     EURO:  11.500,--
MG 030M (SINGLE PHASE, VARIABLE SPEED)     EURO: 11.000,--



MASCHINEN-KIT MIT WERKZEUGEN:              
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO MG 030V2T K2D
MG 030V2T GAS INCH
2 X Ø 13.000,-- MG 030T K2D
MG 030T GAS INCH
2 X Ø 13.000,-- MG 030M K2D MG 030M GAS INCH
2 X Ø 12.250,--          
TOOLS:       Ø 1/2", (21,3 MM), R46       Ø 3/4", (26,9 MM), R56       Ø 1", (33,7 MM), R67       Ø 1", 1/4 (42,25 MM), R90       Ø 1", 1/2 (48,25 MM), R100
      Ø 2", (60,3MM), R150
               
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO MG 030V2T K3D MG 030V2T GAS INCH
3 X Ø 13.250,-- MG 030T K3D MG 030T GAS INCH
3 X Ø 13.250,-- MG 030M K3D MG 030M GAS INCH
3 X Ø 12.750,--          
TOOLS:       Ø 1/2", (21,3 MM), R67       Ø 3/4", (26,9 MM), R82       Ø 1", (33,7 MM), R112       Ø 1", 1/4 (42,25 MM), R130       Ø 1", 1/2 (48,25 MM), R150
      Ø 2", (60,3MM), R190
     

MAX. CAPACITY:
GAS TUBE: 2",1/2 GAS X 4 MM
STANDARD STEEL TUBE: 76 X 3 MM
FURNITURE TUBE: 76 X 3 MM
FE35 (FOR HYDRAULIC TUBES): 70 X 5 MM
STAINLESS STEEL AISI304-316: 70 X 4 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 76 X 1,6 MM
BRASS SOFT: 76 X 4 MM
HARD COPPER AND ALUMINIUM: 76 X 6 MM
SOFT COPPER: 76 X 6 MM
CONDUIT-ROHR (TAZ): 73 X 4 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 45 MM
SQUAREBAR SOLID (S275JO): 40 X 40 MM
FLATSTEEL SOLID (S275JO): 10 X 90 MM
SQUARE PROFILE (S275JO): 30 X 60 X 3 MM RESPECTIVELY 60 X 60 X 3 MM
T-PROFILE (S275JO): 60 X 60 X 6 MM
U-PROFILE (S275JO): 50 X 20 X 6 MM
MAXIMUM BENDING RADIUS: 380 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM TURNING ANGLE: 210°
SPEED: 2/ 4 R/MIN
MOTOR POWER: 220/400 V / 3,5 KW
LENGTH: 910 MM
WIDTH: 680 MM
HEIGT: 370 MM
WEIGHT: 186 KG

Ubicación: : 48 X 3.5 MM
: 54 X 1,5 MM
: 50 X 4 MM
: 50 X 3 MM
: 40 X 2,5 MM
: 60 X 3 MM
: 64 X 2 MM
: 64 X 2 MM
: 60 X 2 MM
: 50 X 4 MM
: 32 MM
: 30 X 30 MM
: 8 X 48 MM
: 40 X 40 X 5 MM
: 32 X 16 X 5 MM
: 300 MM
: 10 MM
: 210 °
: 570 MM
: 410 MM
: 1.000 MM
: 110 KG
3 PHASE
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGE CAPABILITY
30 PROGRAMS, EACH HAS 9 BENDS
DIGITAL DISPLAY OF BEND
MATERIAL SPRING BACK COMPENSATION
QUICK-CHANGE TOOLING SYSTEM
2 HEXAGONAL TOOL HOLDERS
ACCURATE COUNTERBENDING DIE POSITIONING
PORTABLE WITH BASE WHEELS
FOOTSWITCH
USERS MANUAL


ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL:

SB 48M (SINGLE PHASE, 2 R/MIN)     EURO:  7.000,--



MACHINE-KIT WITH TOOLS:              
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO SB 48M K2D
SB 48M
GAS INCH 2 X Ø 8.250,-- SB 48T K2D SB 48T GAS INCH 2 X Ø 8.750,--          
TOOLS:       Ø 1/2", (21,3 MM), R46       Ø 3/4", (26,9 MM), R56       Ø 1", (33,7 MM), R67       Ø 1", 1/4 (42,25 MM), R90       Ø 1", 1/2 (48,25 MM), R100
               
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO SB 48M K3D SB 48M GAS INCH 3 X Ø 8.500,-- SB 48T K3D SB 48T GAS INCH 3 X Ø 9.000,--          
TOOLS:       Ø 1/2", (21,3 MM), R67       Ø 3/4", (26,9 MM), R82       Ø 1", (33,7 MM), R112       Ø 1", 1/4 (42,25 MM), R130       Ø 1", 1/2 (48,25 MM), R150
     

MAX. CAPACITY:
GAS TUBE: 1",1/2 GAS X 3.68 MM
STANDARD STEEL TUBE: 48 X 3.5 MM
FURNITURE TUBE: 54 X 1,5 MM
FE35 (FOR HYDRAULIC TUBES): 50 X 4 MM
STAINLESS STEEL AISI304-316: 50 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 40 X 2,5 MM
BRASS SOFT: 60 X 3 MM
HARD COPPER AND ALUMINIUM: 64 X 2 MM
SOFT COPPER: 64 X 2 MM
CONDUIT-ROHR (TAZ): 60 X 2 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 32 MM
SQUAREBAR SOLID (S275JO): 30 X 30 MM
FLATSTEEL SOLID (S275JO): 8 X 48 MM
SQUARE PROFILE (S275JO): 20 X 40 X 3 MM RESPECTIVELY 40 X 40 X 3 MM
T-PROFILE (S275JO): 40 X 40 X 5 MM
U-PROFILE (S275JO): 32 X 16 X 5 MM
MAXIMUM BENDING RADIUS: 300 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM TURNING ANGLE: 210°
SPEED: 4 R/MIN
MOTOR POWER: 220/400 V / 1,5 KW
LENGTH: 570 MM
WIDTH: 410 MM
HEIGT: 1.000 MM
WEIGHT: 110KG

Ubicación: : 60 X 4 MM
: 60 X 4 MM
: 64 X 5 MM
: 64 X 3 MM
: 60 X 3 MM
: 60 X 6 MM
: 64 X 6 MM
: 64 X 6 MM
: 63 X 4 MM
: 50 X 4 MM
: 35 MM
: 30 X 30 MM
: 14 X 60 MM
: 50 X 50 X 6 MM
: 40 X 20 X 6 MM
: 380 MM
: 10 MM
: 180 °
: 500 MM
: 1.000 MM
: 760 MM
: 186 KG
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGES
QUICK-CHANGE TOOLING SYSTEM WITH MULTIPLE RADII AVAILABLE
DIGITAL DISPLAY OF BEND ANGLE
FOOT PEDAL FOR HANDS-FREE OPERATION
ACCURATE COUNTERBENDING DIE POSITIONING
ACCEPTS ERCOLINA?S A40-P TWO AXIS POSITIONING TABLE FOR MULTIPLE AND SEQUENTIAL BENDS
REPLACES OUTDATED RAM STYLE HYDRAULIC BENDERS
USERS MANUAL



MAX. CAPACITY:
GAS TUBE: 2",GAS X 4 MM
STANDARD STEEL TUBE: 60 X 4 MM
FURNITURE TUBE: 60 X 4 MM
FE35 (FOR HYDRAULIC TUBES): 64 X 5 MM
STAINLESS STEEL AISI304-316: 64 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 60 X 3 MM
BRASS SOFT: 60 X 6 MM
HARD COPPER AND ALUMINIUM: 64 X 6 MM
SOFT COPPER: 64 X 6 MM
CONDUIT-ROHR (TAZ): 63 X 4 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 35 MM
SQUAREBAR SOLID (S275JO): 30 X 30 MM
FLATSTEEL SOLID (S275JO): 14 X 60 MM
SQUARE PROFILE (S275JO): 25 X 50 X 3 MM RESPECTIVELY 50 X 50 X 3 MM
T-PROFILE (S275JO): 50 X 50 X 6 MM
U-PROFILE (S275JO): 40 X 20 X 6 MM
MAXIMUM BENDING RADIUS: 380 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 220-400 V / 1,5 KW
LENGTH: 500 MM
WIDTH: 1.000 MM
HEIGT: 760 MM
WEIGHT: 186 KG

Ubicación: : 42 X 3 MM
: 48 X 1,5 MM
: 42 X 4 MM
: 42 X 3 MM
: 42 X 2,5 MM
: 50 X 3 MM
: 54 X 2 MM
: 60 X 2 MM
: 60 X 2 MM
: 50 X 4 MM
: 10 - 260 MM
: 210 °
: 410 MM
: 570 MM
: 1000 MM
: 80 KG
MANUAL CLAMPING
ELECTRONIC PRESELECTION OF BENDING ANGLE
OVERLOAD PROTECTION
MOBILE BY ROLLS AND HANDLE


ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODELS:


MB 42M (SINGLE PHASE, 2 U/MIN)     EURO:  5.250,--
MB 42PM (PORTABLE, SINGLE PHASE, 2 U/MIN)     EURO:  5.000,--



MASCHINE-KIT WITH TOOLS:              
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO MB42M K2D MB 42M GAS INCH 2 X Ø 6.250,-- MB42T K2D MB 42T GAS INCH 2 X Ø 6.500,-- MB42PM K2D MB 42PM GAS INCH 2 X Ø 6.000,--          
TOOLS:       Ø 1/2", (21,3 MM), R46       Ø 3/4", (26,9 MM), R56       Ø 1", (33,7 MM), R67       Ø 1 1/4", (42,25 MM), R90                
ART.NO. MACHINE TUBE RADIUS PRICE IN EURO MB42M K3D MB 42M GAS INCH 3 X Ø 6.500,-- MB42T K3D MB 42T GAS INCH 3 X Ø 6.750,-- MB42PM K3D MB 42PM GAS INCH 3 X Ø 6.250,--          
TOOLS:       Ø 1/2", (21,3 MM), R56       Ø 3/4", (26,9 MM), R67       Ø 1", (33,7 MM), R90       Ø 1 1/4", (42,25 MM), R112      
TOOL KIT MB42T K2D AT THE MOMENT ON STOCK (STOCK NO.: 9693)

MAX. CAPACITY:
STANDARD STEEL TUBE: 42 X 3 MM
FURNITURE TUBE: 48 X 1,5 MM
FE35 (FOR HYDRAULIC TUBES: 42 X 4 MM
STAINLESS STEEL AISI304-316: 42 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 42 X 2,5 MM
BRASS SOFT: 50 X 3 MM
HARD COPPER AND ALUMINIUM: 54 X 2 MM
SOFT COPPER: 60 X 2 MM
CONDUIT-ROHR (TAZ): 60 X 2 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
BENDING RADII: 10 - 260 MM
MAX. BENDING ANGLE: 210°
MAX. BENDING SPEED: 4 U/MIN
MOTOR: 1,1 KW / 3 PHASE
LENGTH: 410 MM
WIDTH: 570 MM
HEIGHT: 1000 MM
WEIGHT: 80 KG

Ubicación: : 60 X 3 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 3 MM
: 60 X 4 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 4 MM
: 60 X 4 MM
: 50 X 4 MM
: 35 MM
: 30 X 30 MM
: 10 X 60 MM
: 50 X 50 X 6 MM
: 40 X 20 X 6 MM
: 300 MM
: 10 MM
: 180 °
: 595 MM
: 363 MM
: 900 MM
: 130 KG
MANUAL CLAMPING ELECTRONIC PRESELECTION OF BENDING ANGLE DIGITAL READ OUT AND ZERO SETTING FOR CLAMPING POINT 2 SPEEDS OVERLOAD PROTECTION MOBILE BY ROLLS AND HANDLE




MAX. CAPACITY:
GAS TUBE: 2", GAS X 4 MM
STANDARD STEEL TUBE: 60 X 3 MM
FURNITURE TUBE: 60 X 4 MM
FE35 (FOR HYDRAULIC TUBES): 64 X 4 MM
STAINLESS STEEL AISI304-316: 64 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 60 X 4 MM
BRASS SOFT: 60 X 4 MM
HARD COPPER AND ALUMINIUM: 64 X 4 MM
SOFT COPPER: 64 X 4 MM
CONDUIT-ROHR (TAZ): 60 X 4 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 35 MM
SQUAREBAR SOLID (S275JO): 30 X 30 MM
FLATSTEEL SOLID (S275JO): 10 X 60 MM
SQUARE PROFILE (S275JO): 25 X 50 X 3 MM RESPECTIVELY 50 X 50 X 3 MM
T-PROFILE (S275JO): 50 X 50 X 6 MM
U-PROFILE (S275JO): 40 X 20 X 6 MM
MAXIMUM BENDING RADIUS: 300 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 380V / 1,5KW
SPEED: 1,25 / 2,6 REVS/MIN
LENGTH: 595 MM
WIDTH: 363 MM
HEIGT: 900 MM
WEIGHT: 130 KG

Ubicación: : 127 X 7,1 MM
: 127 X 7,1 MM
: 100 X 11 MM
: 114,3 X 5,6 MM
: 114,3 X 5,6 MM
: 139,7 X 8,8 MM
: 139,7 X 8,8 MM
: 139.7 X 8.8 MM
: 120 X 9 MM
: 120 X 6.5 MM
: 90 MM
: 75 X 75 MM
: 100 X 50 MM
: 100 X 100 X 10 MM
: 100 X 100 X 10 MM
: 700 MM
: 36 MM
: 3,5 KW
: 850 MM
: 850 MM
: 1.200 MM
: 400 KG
TOUCH SCREEN PROGRAMMING WITH SYSTEM DIAGNOSTICS IN MULTIPLE LANGUAGES
QUICK-CHANGE TOOLING SYSTEM
DIGITAL DISPLAY OF BEND ANGLE
MATERIAL SPRING BACK COMPENSATION
REMOTE CONTROL OF BEND, RETURN AND EMERGENCY STOP FUNCTIONS
ACCURATE COUNTERBENDING DIE POSITIONING
HEAVY-DUTY STEEL GEAR CASE
USERS MANAUL

MAX. CAPACITY:
GAS TUBE: 4", GAS X 8,56 MM
STANDARD STEEL TUBE: 127 X 7,1 MM
FURNITURE TUBE: 127 X 7,1 MM
FE35 (FOR HYDRAULIC TUBES): 100 X 11 MM
STAINLESS STEEL AISI304-316: 114,3 X 5,6 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 114,3 X 5,6 MM
BRASS SOFT: 139,7 X 8,8 MM
HARD COPPER AND ALUMINIUM: 139,7 X 8,8 MM
SOFT COPPER: 139.7 X 8.8 MM
CONDUIT-ROHR (TAZ): 120 X 9 MM
MEPLA, GEBEREIT AND SIMILAR: 120 X 6.5 MM
ROUNDBAR SOLID (S275JO): 90 MM
SQUAREBAR SOLID (S275JO): 75 X 75 MM
FLATSTEEL SOLID (S275JO): 100 X 50 MM
SQUARE PROFILE (S275JO): 120 X 60 X 9 MM BZW. 90 X 90 X 10 MM
T-PROFILE (S275JO): 100 X 100 X 10 MM
U-PROFILE (S275JO): 100 X 100 X 10 MM
MAXIMUM BENDING RADIUS: 700 MM
MINIMUM BENDING RADIUS: 36 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 3,5 KW
LENGTH: 850 MM
WIDTH: 850 MM
HEIGT: 1.200 MM
WEIGHT: 400 KG

Ubicación: : 60 X 3 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 3 MM
: 60 X 4 MM
: 60 X 4 MM
: 64 X 4 MM
: 64 X 4 MM
: 60 X 4 MM
: 50 X 4 MM
: 35 MM
: 30 X 30 MM
: 10 X 60 MM
: 50 X 50 X 6 MM
: 40 X 20 X 6 MM
: 300 MM
: 10 MM
: 180 °
: 595 MM
: 363 MM
: 900 MM
: 130 KG
MANUAL CLAMPING ELECTRONIC PRESELECTION OF BENDING ANGLE OVERLOAD PROTECTION MOBILE BY ROLLS AND HANDLE

INCL. FOLLOWING TOOL:

STEEL FORMER DM.  1 1/4",  R 90 MM
COUNTERBENDING BRASS DIE 1 1/4",


ALTERNATIVE:

MODEL TOPBENDER 050 T            EURO   9.000,--

- 2 SPEEDS 1,25 / 2,5 U/MIN
- PC BOARD WITH 8 GROUPS EACH 9 STEPS
- ENCODER TO READ THE PRESSURE DIE POSITION
- STANDARD WITHOUT TOOLS

MAX. CAPACITY:
GAS TUBE: 2", GAS X 4 MM
STANDARD STEEL TUBE: 60 X 3 MM
FURNITURE TUBE: 60 X 4 MM
FE35 (FOR HYDRAULIC TUBES): 64 X 4 MM
STAINLESS STEEL AISI304-316: 64 X 3 MM
STAINLESS STEEL AISI308 (FOOD INDUSTRY): 60 X 4 MM
BRASS SOFT: 60 X 4 MM
HARD COPPER AND ALUMINIUM: 64 X 4 MM
SOFT COPPER: 64 X 4 MM
CONDUIT-ROHR (TAZ): 60 X 4 MM
MEPLA, GEBEREIT AND SIMILAR: 50 X 4 MM
ROUNDBAR SOLID (S275JO): 35 MM
SQUAREBAR SOLID (S275JO): 30 X 30 MM
FLATSTEEL SOLID (S275JO): 10 X 60 MM
SQUARE PROFILE (S275JO): 25 X 50 X 3 MM RESPECTIVELY 50 X 50 X 3 MM
T-PROFILE (S275JO): 50 X 50 X 6 MM
U-PROFILE (S275JO): 40 X 20 X 6 MM
MAXIMUM BENDING RADIUS: 300 MM
MINIMUM BENDING RADIUS: 10 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR POWER: 380V / 1,5KW
LENGTH: 595 MM
WIDTH: 363 MM
HEIGT: 900 MM
WEIGHT: 130 KG

Ubicación: : 76,2 X 5 Ø MM
: 76,2 X 3 Ø MM
: 76,2 X 8 Ø MM
: 63,5 X 63,5 X 4,2 Ø MM
: 76 MM
: 250 MM
: 20 MM
: 185 °
: 16 KW
: 5.735 MM
: 1.480 MM
: 1.055 MM
: 2.750 KG
WITH MANDREL 4 M LENGTH
ERCOLINA?S ERCO BENDER EB76 CNC6 3 AXIS CNC MANDREL MACHINE HAS FULLY AUTOMATIC LINEAR AND ROTARY MOTION CONTROL OF CARRIAGE AND MANDREL
AUTOMATIC OR MANUAL BEND SEQUENCING
INDEPENDENT PRESSURE AND CLAMP DIE ADJUSTMENT
PROGRAMMABLE CARRIAGE MOVEMENT FOR TIGHT RADII
STANDARD RIGHT HAND BENDING DIRECTION
INTERACTIVE TOUCH SCREEN WITH AUTO AND MANUAL OPERATING MODES, SYSTEM DIAGNOSTICS AND MULTIPLE LANGUAGE CAPABILITY
PROGRAMMABLE MATERIAL SPRINGBACK SETTINGS FOR EACH BEND ANGLE
DISPLAYS ABSOLUTE (ABA) OR INCREMENTAL (INC) POSITIONING WITH INCH OR METRIC READOUT
USERS MANUAL

FURTHER MANDREL LENGTHS ON REQUEST

ROUND TUBE: Ø 76,2 X 5 MM
PIPE: 2?1/2 X 40 MM
STAINLESS STEEL: Ø 76,2 X 3 MM
COPPER ALUMINIUM: Ø 76,2 X 8 MM
SQUARE TUBE: Ø 63,5 X 63,5 X 4,2 MM
RECT. TUBE: Ø 50 X 63 X 7 MM RESPECTIVELY Ø 63 X 50 X 5,5 MM
MAX. OUTSIDE DIAMETER: 76 MM
MAX. CENTER LINE RADIUS: 250 MM
MIN. CENTER LINE RADIUS: 20 MM
MAX. BENDING ANGLE: 185°
POWER: 16 KW
LENGTH: 5.735 MM
WIDTH: 1.480 MM
HEIGHT: 1.055 MM
WEIGHT: 2.750 KG

Ubicación: : 40 MM
ROLL DIAMETER: 165 MM
WEIGHT OF THE MACHINE CA.: 300 KG
DIMENSIONS OF THE MACHINE CA.: 560X1430X980 MM

Ubicación: : 60X3 MM
: 60X2,5 MM
: 35 MM
: R10-R300
BENDING SPEED: 2 U/MIN
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 130 KG
DIMENSIONS OF THE MACHINE CA.: 595X900X363 MM

Ubicación: : R10-R260
: 210 °
BENDING SPEED: 2 U/MIN
: 1 1/4 X 3,5 MM
AMOUNT OF PROGRAMMS: 30 X 9
: EINPHASIG - 230 V
DRIVE MOTOR: 1,1 KW
WEIGHT OF THE MACHINE CA.: 80 KG
DIMENSIONS OF THE MACHINE CA.: 410 X 1000 X 570 MM

Ubicación: : R 10+R 300
BENDING SPEED: 2 U/MIN
: 30 JE 9 BIEGUNGEN
: 64X2 MM
: 48X3,5 MM
: 48X2,5 MM
: 32 MM
DIMENSIONS OF THE MACHINE CA.: 410 X 1000 X 570 MM
WEIGHT OF THE MACHINE CA.: 110 KG

Ubicación: : R10-R260
BENDING SPEED: 2,5 U/MIN
: 42X3 MM
: 42X2,5 MM
: 30 MM
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 80 KG
DIMENSIONS OF THE MACHINE CA.: 410X1000X570 MM

Ubicación: : 48X3,5 MM
: 48X2,5 MM
: 32 MM
: R10-R300
BENDING SPEED: 2 U/MIN
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT OF THE MACHINE CA.: 110 KG
DIMENSIONS OF THE MACHINE CA.: 410X1000X570 MM

Ubicación: : R10-R260
: MAX. 210 °
: 54X2 MM
: 42X2,5 MM
: 42X3,5 MM
: 30 MM
BENDING SPEED: MAX. 4 U/MIN
AMOUNT OF PROGRAMMS: 30X9
VOLTAGE: DREIPHASIG 220-400 V
TOTAL POWER REQUIREMENT: 1,1 KW
DIMENSIONS OF THE MACHINE CA.: 1000 X 410 X 570 MM
WEIGHT OF THE MACHINE CA.: 80 KG

Ubicación: TUBE DIAMETER: 42,0 MM STAHL
WALL STRENGTH: 3,0 MM STAHL
TUBE DIAMETER: 54,0 MM CU/ALU
WALL STRENGTH: 2,0 MM
BAR MATERIAL - DIAMETER: 30,0 MM
REVOLUTIONS PER MINUTE: 2,5 U/MIN
VOLTAGE: 230 VOLT
TOTAL POWER REQUIREMENT: 1,5 KW
WEIGHT: 80 KG
RANGE L-W-H: 410 X 1000 X 570 MM
FACILITIES:
- THORNLESS TUBE BENDING MACHINE
- SOFT TOUCH CONTROL PANEL IN 8 DIFFERENT LANGUAGES
- BENDING RADII R 10 TO R 260 (MIN. R = 2 X D)
- 30 PROGRAMS EACH WITH 9 BENDS
- DRIVING DEVICE
- FOOTSWITCH
- DEMAND-MANUAL IN GERMAN

* BENDING FORMERS ARE AVAILABLE ON REQUEST