414 ofertas

Año de construcción: usado
Precio: 6.200 €
Ubicación: Land-duration / alb ear power 30/35 mm thread cutting capacity max m24 (steigungsabhã¤ngig) hand-reversing switch for forward link. 
undervoltage, thermal overload protection, spindle mk 3 drilling depth 125 mm projection 280 mm column diameter of 110 mm-usable surface of the table [bxl] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment 
table height with rack and pinion motor three-phase of 400 v pole changing bar 1,5/2 kw spindle speed continuously 125 - 2000 1/min mechanical feed in 3 levels of 0.10/0.16/0, 25 mm / rev. 

including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

warranty: 3 years delivery: immediately, free delivery loaded: free house including packaging

not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *.
 DURATION / ALB EAR POWER 30/35 MM THREAD CUTTING CAPACITY MAX M24 (STEIGUNGSABHäNGIG) HAND-REVERSING SWITCH FOR FORWARD LINK. UNDERVOLTAGE, THERMAL OVERLOAD PROTECTION, SPINDLE MK 3 DRILLING DEPTH 125 MM PROJECTION 280 MM COLUMN DIAMETER OF 110 MM-USABLE SURFACE OF THE TABLE [BXL] 420 X 340 MM SPEED DISPLAY SCALE DRILLING DEPTH INDICATOR SCALE DRILL DEPTH STOP WITH FINE ADJUSTMENT TABLE HEIGHT WITH RACK AND PINION MOTOR THREE-PHASE OF 400 V POLE CHANGING BAR 1,5/2 KW SPINDLE SPEED CONTINUOUSLY 125 - 2000 1/MIN MECHANICAL FEED IN 3 LEVELS OF 0.10/0.16/0, 25 MM / REV. INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. WARRANTY: 3 YEARS DELIVERY: IMMEDIATELY, FREE DELIVERY LOADED: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-; accessories: leistung (brief):57, bereifung (v):405/70-20, bereifung (h):405/70-20, allrad, kabine, diesel, teleskoparm (längenverstellung); maximum lift capacity [kg]: 3000 ; ACCESSORIES: LEISTUNG (BRIEF):57, BEREIFUNG (V):405/70-20, BEREIFUNG (H):405/70-20, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG); MAXIMUM LIFT CAPACITY [KG]: 3000
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 5.700 €
Ubicación: Land-continuous drehzahlregelungnot schlagtasterhand turn switch for law linkslaufunterspannungsausloesertischhoehenverstellung on zahnstangebohrtiefenanschlag with feineinstellunganschlusskabel (1.5 m) with cee-steckerbohrschutz with electr. absicherungthermischer duration of overload protection/normalbohrleistung25/30 mmgewindeschneidleistung m20spindelmk iiibohrtiefe125 mmausladung280 mmsaeulendurchmesser110 mmnutzbare table area (b x l) (gradient-dependent) maximum 420 x 340 mmt-nutengroesseanzahl 2 , distance 125 mmabmessung breite13/26drehzahlanzeigeskalabohrtiefenanzeigeskalabohrtiefenanschlagmit feineinstellungtischhoehenverstellungmit zahnstangemotor three-phase 400 v polumschaltbar0, 90/1.45 kwspindeldrehzahlen with transmission, stepless 125-4000 1 /. minspindeldrehzahlen with stub shaft, 2 stufenstufe i 125-2000 1 / minstufe ii 250-4000 1 / less consonant gradation is made through riemenumlegungvorschub including electromagnetic kupplung0, 10/0.16/0.25 mm/umdr.spindel/tisch240-790 mmmaschinen dimensions (w x d x h) 520 x 820 x 1900 mmmaschinen dimension (with vp) (w x d x h) 637 x 1096 x 2120 mmgewicht300 kginklusive drilling package consisting: taper mandrel, chuck, vice and t - groove set. delivery: free house including verpackungnicht the right machine? we do also other afloat products - ask for a quote! * flott base partner *.  CONTINUOUS DREHZAHLREGELUNGNOT SCHLAGTASTERHAND TURN SWITCH FOR LAW LINKSLAUFUNTERSPANNUNGSAUSLOESERTISCHHOEHENVERSTELLUNG ON ZAHNSTANGEBOHRTIEFENANSCHLAG WITH FEINEINSTELLUNGANSCHLUSSKABEL (1.5 M) WITH CEE-STECKERBOHRSCHUTZ WITH ELECTR. ABSICHERUNGTHERMISCHER DURATION OF OVERLOAD PROTECTION/NORMALBOHRLEISTUNG25/30 MMGEWINDESCHNEIDLEISTUNG M20SPINDELMK IIIBOHRTIEFE125 MMAUSLADUNG280 MMSAEULENDURCHMESSER110 MMNUTZBARE TABLE AREA (B X L) (GRADIENT-DEPENDENT) MAXIMUM 420 X 340 MMT-NUTENGROESSEANZAHL 2 , DISTANCE 125 MMABMESSUNG BREITE13/26DREHZAHLANZEIGESKALABOHRTIEFENANZEIGESKALABOHRTIEFENANSCHLAGMIT FEINEINSTELLUNGTISCHHOEHENVERSTELLUNGMIT ZAHNSTANGEMOTOR THREE-PHASE 400 V POLUMSCHALTBAR0, 90/1.45 KWSPINDELDREHZAHLEN WITH TRANSMISSION, STEPLESS 125-4000 1 /. MINSPINDELDREHZAHLEN WITH STUB SHAFT, 2 STUFENSTUFE I 125-2000 1 / MINSTUFE II 250-4000 1 / LESS CONSONANT GRADATION IS MADE THROUGH RIEMENUMLEGUNGVORSCHUB INCLUDING ELECTROMAGNETIC KUPPLUNG0, 10/0.16/0.25 MM/UMDR.SPINDEL/TISCH240-790 MMMASCHINEN DIMENSIONS (W X D X H) 520 X 820 X 1900 MMMASCHINEN DIMENSION (WITH VP) (W X D X H) 637 X 1096 X 2120 MMGEWICHT300 KGINKLUSIVE DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. DELIVERY: FREE HOUSE INCLUDING VERPACKUNGNICHT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! * FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 25.800 €
Ubicación: Land-; rear tyres remaining: 60; front tyres remaining: 60; accessories: leistung (brief):75, bereifung (v):405/70-24, bereifung (h):405/70-24, allrad, kabine, diesel, teleskoparm (längenverstellung) ; REAR TYRES REMAINING: 60; FRONT TYRES REMAINING: 60; ACCESSORIES: LEISTUNG (BRIEF):75, BEREIFUNG (V):405/70-24, BEREIFUNG (H):405/70-24, ALLRAD, KABINE, DIESEL, TELESKOPARM (LäNGENVERSTELLUNG)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 4.885 €
Ubicación: Land-duration / alb ear power 30/35 mm thread cutting capacity max m24 (steigungsabhã¤ngig) hand-reversing switch for forward link. 
undervoltage, thermal overload protection, spindle mk 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [bxl] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment 
table height with rack and pinion motor three-phase of 400 v pole changing bar 1,5/2 kw spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, chuck, vice and t - groove set. 

warranty: 3 years delivery: immediately, free delivery loaded: free house including packaging not the right machine? 
we do also other afloat products - ask for a quote! 

flott base partner *.
 DURATION / ALB EAR POWER 30/35 MM THREAD CUTTING CAPACITY MAX M24 (STEIGUNGSABHäNGIG) HAND-REVERSING SWITCH FOR FORWARD LINK. UNDERVOLTAGE, THERMAL OVERLOAD PROTECTION, SPINDLE MK 3 DRILLING DEPTH 180 MM THROAT DEPTH 260 MM COLUMN DIAMETER OF 110 MM-USABLE TABLE SURFACE [BXL] 420 X 340 MM SPEED DISPLAY SCALE DRILLING DEPTH INDICATOR SCALE DRILL DEPTH STOP WITH FINE ADJUSTMENT TABLE HEIGHT WITH RACK AND PINION MOTOR THREE-PHASE OF 400 V POLE CHANGING BAR 1,5/2 KW SPINDLE SPEED CONTINUOUSLY 125-2000 1 / MIN INCLUDING DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. WARRANTY: 3 YEARS DELIVERY: IMMEDIATELY, FREE DELIVERY LOADED: FREE HOUSE INCLUDING PACKAGING NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Ubicación: Land-boring power: 45,0 mm<br/>bore stroke: 240 mm<br/>center of spindle to wall or column: 360 mm<br/>column diameter: 160 mm<br/>size of table plate: 560 x 480 mm<br/>speed: 68 - 1270 u/min.<br/>feed: 0/0,1/0,2/0,3/0,4 mm/u<br/>morse taper: mk 4 <br/>motor output: 2,55 kw<br/>weight of the machine ca.: ca. 650 kg<br/>dimensions (l/w/h): 600 x 1000 x 2400 mm<br/><br/><br/><br/><br/> BORING POWER: 45,0 MM
BORE STROKE: 240 MM
CENTER OF SPINDLE TO WALL OR COLUMN: 360 MM
COLUMN DIAMETER: 160 MM
SIZE OF TABLE PLATE: 560 X 480 MM
SPEED: 68 - 1270 U/MIN.
FEED: 0/0,1/0,2/0,3/0,4 MM/U
MORSE TAPER: MK 4
MOTOR OUTPUT: 2,55 KW
WEIGHT OF THE MACHINE CA.: CA. 650 KG
DIMENSIONS (L/W/H): 600 X 1000 X 2400 MM




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-labeling machine krones autocol 747 rotary pressure sensitive 55 000 bph

this labeling machine was manufactured in year 2009 by krones and it has been operated very limited hours till year 2012. it has three double reel stations for self-adhesive paper and film labels to be placed on front-back-neck of a bottle. each container plate on the container table is powered by a computer controlled actuator. the bottle rotations required for rolling on the labels are conducted according to a set program. when changing over to a new type label, no mechanical cam must be changed. capacity with 0.5 liter glass bottle is 55 000 bph, the labeler is still installed and in excellent condition (with a aci empty bottle inspector, europool dryer and krones checkmatic label inspector and related conveyors)
technical data of this labeler:
- manufactured by korones ag in year 2009
- estimated running hours approx 15 000 only
- model autocol asl k-747-838a34
- three label stations with double reels for discontinuous reel change over
- 60 computer controlled container stations
- front-back-neck adhesive paper and film labels
- capacity 55 000 bph with 0.5 liter glass bottle
- simens simatic s7 plc with touch screen
- helix style infeed and discharge
- videojet laser coder
- vertical sliding safety guards with interlocks   LABELING MACHINE KRONES AUTOCOL 747 ROTARY PRESSURE SENSITIVE 55 000 BPH THIS LABELING MACHINE WAS MANUFACTURED IN YEAR 2009 BY KRONES AND IT HAS BEEN OPERATED VERY LIMITED HOURS TILL YEAR 2012. IT HAS THREE DOUBLE REEL STATIONS FOR SELF-ADHESIVE PAPER AND FILM LABELS TO BE PLACED ON FRONT-BACK-NECK OF A BOTTLE. EACH CONTAINER PLATE ON THE CONTAINER TABLE IS POWERED BY A COMPUTER CONTROLLED ACTUATOR. THE BOTTLE ROTATIONS REQUIRED FOR ROLLING ON THE LABELS ARE CONDUCTED ACCORDING TO A SET PROGRAM. WHEN CHANGING OVER TO A NEW TYPE LABEL, NO MECHANICAL CAM MUST BE CHANGED. CAPACITY WITH 0.5 LITER GLASS BOTTLE IS 55 000 BPH, THE LABELER IS STILL INSTALLED AND IN EXCELLENT CONDITION (WITH A ACI EMPTY BOTTLE INSPECTOR, EUROPOOL DRYER AND KRONES CHECKMATIC LABEL INSPECTOR AND RELATED CONVEYORS) TECHNICAL DATA OF THIS LABELER: - MANUFACTURED BY KORONES AG IN YEAR 2009 - ESTIMATED RUNNING HOURS APPROX 15 000 ONLY - MODEL AUTOCOL ASL K-747-838A34 - THREE LABEL STATIONS WITH DOUBLE REELS FOR DISCONTINUOUS REEL CHANGE OVER - 60 COMPUTER CONTROLLED CONTAINER STATIONS - FRONT-BACK-NECK ADHESIVE PAPER AND FILM LABELS - CAPACITY 55 000 BPH WITH 0.5 LITER GLASS BOTTLE - SIMENS SIMATIC S7 PLC WITH TOUCH SCREEN - HELIX STYLE INFEED AND DISCHARGE - VIDEOJET LASER CODER - VERTICAL SLIDING SAFETY GUARDS WITH INTERLOCKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-cutting length 4300mm<br/>cutting width  4300mm<br/>sawblade height 125mm<br/>main motor 13.5kw<br/>scoring 2.2kw<br/>feed speed of saw carriage 5-100m/min forward, 100 m/min return<br/>programmable fence with 7 grippers<br/>main sawbalde diameter 450mm<br/>4 air tables of 2160 x 650<br/>powerloc system for main saw and scoring saw<br/>cadmatic controlls<br/>dust extraction: 1 x diameter 200 mm, 1 x diameter 160 mm<br/>air speed required: 28 m/s CUTTING LENGTH 4300MM
CUTTING WIDTH 4300MM
SAWBLADE HEIGHT 125MM
MAIN MOTOR 13.5KW
SCORING 2.2KW
FEED SPEED OF SAW CARRIAGE 5-100M/MIN FORWARD, 100 M/MIN RETURN
PROGRAMMABLE FENCE WITH 7 GRIPPERS
MAIN SAWBALDE DIAMETER 450MM
4 AIR TABLES OF 2160 X 650
POWERLOC SYSTEM FOR MAIN SAW AND SCORING SAW
CADMATIC CONTROLLS
DUST EXTRACTION: 1 X DIAMETER 200 MM, 1 X DIAMETER 160 MM
AIR SPEED REQUIRED: 28 M/S
Vendedor: Vebim
Año de construcción: usado
Ubicación: Land-fully automated page welding machine
manufacturer: diez
type: dc 5015
year of construction: 2018

operating side: in the running direction left
band-width: approx. 450 mm
clearance height: approx. 150 mm
barrel length: endless
working height / belt height a-spout: approx. 860 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 400v ac, 50 hz, 3 ph + n + pe
power consumption: 5 kw
nominal current: 10 a
with cable and 16a cee plug
compressed air supply: 6 bar

external dimensions:

length: 2100 mm
width: 1420 mm
height: 1320 mm
weight: 850 kg

description:
the packaging machine automatically packaged products of all kinds in foil. maximum flexibility through the page welding can endlessly packaging products. this enables also the packaging of overlong products. they are limited only in width and in height. even very small products can be packed.

the page welding machine guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube film (shrink film or pe shrink film). the product length is automatically detected via sensors.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
page welding knife with machine stop moves upwards
duration-heated sealing system with low maintenance teflon coating
needle perforation can be switched on if necessary
quick switch to simple us between different products
photo cell vertically and horizontally
motor-driven stamp closure via servomotor
all motors controlled by frequency converter
very low-noise operation
painting ral 5012
machine new (vorfã¼hrmaschine)
 FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: DC 5015 YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: APPROX. 450 MM CLEARANCE HEIGHT: APPROX. 150 MM BARREL LENGTH: ENDLESS WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 860 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 400V AC, 50 HZ, 3 PH + N + PE POWER CONSUMPTION: 5 KW NOMINAL CURRENT: 10 A WITH CABLE AND 16A CEE PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 2100 MM WIDTH: 1420 MM HEIGHT: 1320 MM WEIGHT: 850 KG DESCRIPTION: THE PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. MAXIMUM FLEXIBILITY THROUGH THE PAGE WELDING CAN ENDLESSLY PACKAGING PRODUCTS. THIS ENABLES ALSO THE PACKAGING OF OVERLONG PRODUCTS. THEY ARE LIMITED ONLY IN WIDTH AND IN HEIGHT. EVEN VERY SMALL PRODUCTS CAN BE PACKED. THE PAGE WELDING MACHINE GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE FILM (SHRINK FILM OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT PAGE WELDING KNIFE WITH MACHINE STOP MOVES UPWARDS DURATION-HEATED SEALING SYSTEM WITH LOW MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY QUICK SWITCH TO SIMPLE US BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY MOTOR-DRIVEN STAMP CLOSURE VIA SERVOMOTOR ALL MOTORS CONTROLLED BY FREQUENCY CONVERTER VERY LOW-NOISE OPERATION PAINTING RAL 5012 MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 2.700 €
Ubicación: Land-: 38 x 1,5 mm<br/>: 38 x 1,5 mm<br/>: 35 x 3 mm<br/>: 30 x 2 mm<br/>: 35 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 42 x 1,5 mm<br/>: 50 x 2 mm<br/>: 50 x 2 mm<br/>: 50 x 4 mm<br/>: 20 mm<br/>: 180 °<br/>: 300 mm<br/>: 245 mm<br/>: 320 mm<br/>: 23 kg<br/>demomachine<br/><br/>digital preseting of bending angle 0 - 180° <br/>one phase motor 220 v/ 900 watt <br/>electrical motor brake <br/>overload signal lamp <br/>stand made of cast iron <br/>prepared for fixing on a tripod (not included)<br/>90° bending in 6 sec.<br/><br/>options aigainst additional price:<br/><br/>tripod ? 170,-<br/><br/>machine with tool kit for tubes   md070mkgs  ? 3.400,-<br/>½?gas r46,  ¾?gas r56,  1?gas r82<br/><br/>maximum tube diameter: <br/>standard steel tube: 38 x 1,5 mm<br/>gas tube: 1", x 3,4<br/>furniture tube:	38 x 1,5 mm<br/>st35 hydraulic tube: 35 x 3 mm<br/>stainless steel tube aisi304-316: 30 x 2 mm<br/>stainless steel tube aisi308 (food industry): 35 x 1,5 mm<br/>soft brass: 42 x 1,5 mm<br/>hard copper and aluminium: 42 x 1,5 mm<br/>soft copper: 50 x 2 mm<br/>conduit-tubes (taz): 50 x 2 mm<br/>mepla, gebereit and similar tubes: 50 x 4 mm<br/>round bar: 20 mm <br/>maximum bending angle: 180° <br/>motor: 220v / 0,9 kw <br/>length: 300 mm <br/>width: 245 mm <br/>height: 320 mm  <br/>weight: 23 kg<br/><br/><br/><br/> : 38 X 1,5 MM
: 38 X 1,5 MM
: 35 X 3 MM
: 30 X 2 MM
: 35 X 1,5 MM
: 42 X 1,5 MM
: 42 X 1,5 MM
: 50 X 2 MM
: 50 X 2 MM
: 50 X 4 MM
: 20 MM
: 180 °
: 300 MM
: 245 MM
: 320 MM
: 23 KG
DEMOMACHINE

DIGITAL PRESETING OF BENDING ANGLE 0 - 180° 
ONE PHASE MOTOR 220 V/ 900 WATT 
ELECTRICAL MOTOR BRAKE 
OVERLOAD SIGNAL LAMP 
STAND MADE OF CAST IRON 
PREPARED FOR FIXING ON A TRIPOD (NOT INCLUDED)
90° BENDING IN 6 SEC.

OPTIONS AIGAINST ADDITIONAL PRICE:

TRIPOD ? 170,-

MACHINE WITH TOOL KIT FOR TUBES   MD070MKGS ? 3.400,-
½?GAS R46,  ¾?GAS R56,  1?GAS R82

MAXIMUM TUBE DIAMETER:
STANDARD STEEL TUBE: 38 X 1,5 MM
GAS TUBE: 1", X 3,4
FURNITURE TUBE: 38 X 1,5 MM
ST35 HYDRAULIC TUBE: 35 X 3 MM
STAINLESS STEEL TUBE AISI304-316: 30 X 2 MM
STAINLESS STEEL TUBE AISI308 (FOOD INDUSTRY): 35 X 1,5 MM
SOFT BRASS: 42 X 1,5 MM
HARD COPPER AND ALUMINIUM: 42 X 1,5 MM
SOFT COPPER: 50 X 2 MM
CONDUIT-TUBES (TAZ): 50 X 2 MM
MEPLA, GEBEREIT AND SIMILAR TUBES: 50 X 4 MM
ROUND BAR: 20 MM
MAXIMUM BENDING ANGLE: 180°
MOTOR: 220V / 0,9 KW
LENGTH: 300 MM
WIDTH: 245 MM
HEIGHT: 320 MM
WEIGHT: 23 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-fully automated page welding machine
manufacturer: diez
type: dce 5015
year of construction: 2018

operating side: in the running direction left
band-width: approx. 450 mm
clearance height: approx. 150 mm
barrel length: endless
working height / belt height a-spout: approx. 870 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 400v ac, 50 hz, 3 ph + n + pe
power consumption: 2 kw
nominal current: 8 a
with cable and 16a cee plug
compressed air supply: 6 bar

external dimensions:
length: 1750 mm
width: 1000 mm
height: 1520 mm

description:
this packaging machine automatically packaged products of all kinds in foil. maximum flexibility through the page welding can endlessly packaging products. this allows the user to also overlong products packaging they are limited only in width and in height. but also very small products can it to be packed. the page welding machine guarantees extremely stable side seams for all slides. the processing of the film via the three-sided welding of a half tube film (shrink film or pe shrink film). the product length is automatically detected via sensors.

compact construction
high operating and service friendliness
very robust and long-lasting mechanical engineering
for polyolefin fine shrink films * and ldpe films
page welding knife with machine stop moves upwards
duration-heated sealing system with low maintenance teflon coating
needle perforation can be switched on if necessary
simple and quick switch between different products
photo cell vertically and horizontally
motor-driven stamp closure via servomotor
all motors controlled by frequency converter
very low-noise operation
painting ral 5012
* can be optionally retrofitted desire FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: DCE 5015 YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: APPROX. 450 MM CLEARANCE HEIGHT: APPROX. 150 MM BARREL LENGTH: ENDLESS WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 870 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 400V AC, 50 HZ, 3 PH + N + PE POWER CONSUMPTION: 2 KW NOMINAL CURRENT: 8 A WITH CABLE AND 16A CEE PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 1750 MM WIDTH: 1000 MM HEIGHT: 1520 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. MAXIMUM FLEXIBILITY THROUGH THE PAGE WELDING CAN ENDLESSLY PACKAGING PRODUCTS. THIS ALLOWS THE USER TO ALSO OVERLONG PRODUCTS PACKAGING THEY ARE LIMITED ONLY IN WIDTH AND IN HEIGHT. BUT ALSO VERY SMALL PRODUCTS CAN IT TO BE PACKED. THE PAGE WELDING MACHINE GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE THREE-SIDED WELDING OF A HALF TUBE FILM (SHRINK FILM OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. COMPACT CONSTRUCTION HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR POLYOLEFIN FINE SHRINK FILMS * AND LDPE FILMS PAGE WELDING KNIFE WITH MACHINE STOP MOVES UPWARDS DURATION-HEATED SEALING SYSTEM WITH LOW MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY SIMPLE AND QUICK SWITCH BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY MOTOR-DRIVEN STAMP CLOSURE VIA SERVOMOTOR ALL MOTORS CONTROLLED BY FREQUENCY CONVERTER VERY LOW-NOISE OPERATION PAINTING RAL 5012 * CAN BE OPTIONALLY RETROFITTED DESIRE
Vendedor: METEC GmbH
Año de construcción: usado
Precio: 22.400 €
Ubicación: Land-: 30 to<br/>: 2 mm<br/>: 400 x 600 mm<br/>: 3 kw<br/>: 200 mm<br/>: 300 mm<br/>: 40 mm<br/>: 1.150 mm<br/>: 1.350 mm<br/>: 2.050 mm<br/>: 1.700 kg<br/>demomachine<br/><br/>welded steel construction body frame<br/>4-fold ram guide<br/>pneumatic clutch-brake combination<br/>photocell light barriers<br/>mechanical overload fuse<br/>two hand and foot pedal control<br/>adjustable stroke<br/>central lubrication<br/>machine and equipment in conformity with ce-regulations<br/><br/>option: vibration pads ? 132,--<br/><br/><br/><br/><br/> <br/><br/>capacity: 30 to<br/>tonnage rating point: 2 mm<br/>table: 400 x 600 mm<br/>stroke: 0 - 60 mm<br/>number of strokes: 140 1/min.<br/>motor: 3 kw<br/>throat depth: 200 mm<br/>build-in height: 300 mm<br/>ram hole: 40 mm<br/>length: 1.150 mm<br/>width: 1.350 mm<br/>height: 2.050 mm<br/>weight: 1.700 kg<br/><br/><br/><br/> : 30 TO
: 2 MM
: 400 X 600 MM
: 3 KW
: 200 MM
: 300 MM
: 40 MM
: 1.150 MM
: 1.350 MM
: 2.050 MM
: 1.700 KG
DEMOMACHINE

WELDED STEEL CONSTRUCTION BODY FRAME
4-FOLD RAM GUIDE
PNEUMATIC CLUTCH-BRAKE COMBINATION
PHOTOCELL LIGHT BARRIERS
MECHANICAL OVERLOAD FUSE
TWO HAND AND FOOT PEDAL CONTROL
ADJUSTABLE STROKE
CENTRAL LUBRICATION
MACHINE AND EQUIPMENT IN CONFORMITY WITH CE-REGULATIONS

OPTION: VIBRATION PADS ? 132,--






CAPACITY: 30 TO
TONNAGE RATING POINT: 2 MM
TABLE: 400 X 600 MM
STROKE: 0 - 60 MM
NUMBER OF STROKES: 140 1/MIN.
MOTOR: 3 KW
THROAT DEPTH: 200 MM
BUILD-IN HEIGHT: 300 MM
RAM HOLE: 40 MM
LENGTH: 1.150 MM
WIDTH: 1.350 MM
HEIGHT: 2.050 MM
WEIGHT: 1.700 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 53.287 €
Ubicación: Land-a new mtu 12v2000 g26f diesel engine from 2016 will be offered.
a total of two gensets are available.

if you are interested, please contact us at the following email address:

info@onergys.de


general information:

mtu diesel engine type 12v2000 g26f for power generation in continuous operation variable.
power: 709 kw 10% overloadable (icxn), din iso3046
speed: 1.500 min-1
year of construction: 2016 (new engine)
delivery time: 2 - 4 days

basic engine with electronic engine management (make mtu, type adec). A NEW MTU 12V2000 G26F DIESEL ENGINE FROM 2016 WILL BE OFFERED. A TOTAL OF TWO GENSETS ARE AVAILABLE. IF YOU ARE INTERESTED, PLEASE CONTACT US AT THE FOLLOWING EMAIL ADDRESS: INFO@ONERGYS.DE GENERAL INFORMATION: MTU DIESEL ENGINE TYPE 12V2000 G26F FOR POWER GENERATION IN CONTINUOUS OPERATION VARIABLE. POWER: 709 KW 10% OVERLOADABLE (ICXN), DIN ISO3046 SPEED: 1.500 MIN-1 YEAR OF CONSTRUCTION: 2016 (NEW ENGINE) DELIVERY TIME: 2 - 4 DAYS BASIC ENGINE WITH ELECTRONIC ENGINE MANAGEMENT (MAKE MTU, TYPE ADEC).
Vendedor: ONERGYS GmbH
Año de construcción: usado
Ubicación: Land-boring power: 35,0 mm<br/>bore depth: 200 mm<br/>bore spindles - morse taper: mk 3 <br/>throat: 365 mm<br/>column diameter: 165 mm<br/>feed: 0,0/0,1/0,18/0,24 mm/u<br/>turning speeds: 93 - 1420 u/min<br/>table:: 480 x 560 <br/>range l-w-h: 950 x 560 x 2450 mm<br/>weight: ca. 450 kg<br/>total power requirement: 1,5 kw<br/><br/><br/><br/><br/> BORING POWER: 35,0 MM
BORE DEPTH: 200 MM
BORE SPINDLES - MORSE TAPER: MK 3
THROAT: 365 MM
COLUMN DIAMETER: 165 MM
FEED: 0,0/0,1/0,18/0,24 MM/U
TURNING SPEEDS: 93 - 1420 U/MIN
TABLE:: 480 X 560
RANGE L-W-H: 950 X 560 X 2450 MM
WEIGHT: CA. 450 KG
TOTAL POWER REQUIREMENT: 1,5 KW




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land--stock machine, ce
-after reviewing the technical
-manual in polish

-year of manufacture 2007

technical parameters:

-cutting height: 300 mm
-cutting width: 508 mm

-the minimum strip thickness: 6 mm
– maximum strip thickness: 30 mm
-belt length: 3820 mm

-table size: 530 x 530 mm
-change the position of the table: 45 ° to-10 °

-stop function at angle: 90 °
-working height: 930 mm
-working height: 930 mm

-diameter: 520 mm
blade speed: 1000 m/min
-size saws: 900 x 1100 x 197

-the power of the actual motor 400 v: 3 km/s1 100%
-rated engine power 400 v: 5.7 km/s6 40%

-weight 230 kg

basic equipment

-suction pipe for wed. 100 mm
-tape 20 mm saw blades and tooth pitch 7 mm

the characteristics of the

large clamping device for precision cuts special blocked with eccentricities

balanced wheels made of cast iron and coated with embossed polyurethane coating with a very long battery life

a very large table saws made of cast iron; the possibility of double swing, by very massive pó?ksi??ycowe segments

each saw is equipped with a built-in scale to accurately read the cutting height

control window allows you to easily set the run tape

accurate and very easy to set the cutting height as well as the upper idler by manual knob and gear guides

tensioning strap with a large cast iron knobs, easy to read the value of the tension of the tape

adjustable clamping device for cutting for ± 60 °

precise clamping device for longitudinal cuts

on/off switch with overload protection

accurate upper and lower belt guidance -STOCK MACHINE, CE -AFTER REVIEWING THE TECHNICAL -MANUAL IN POLISH -YEAR OF MANUFACTURE 2007 TECHNICAL PARAMETERS: -CUTTING HEIGHT: 300 MM -CUTTING WIDTH: 508 MM -THE MINIMUM STRIP THICKNESS: 6 MM – MAXIMUM STRIP THICKNESS: 30 MM -BELT LENGTH: 3820 MM -TABLE SIZE: 530 X 530 MM -CHANGE THE POSITION OF THE TABLE: 45 ° TO-10 ° -STOP FUNCTION AT ANGLE: 90 ° -WORKING HEIGHT: 930 MM -WORKING HEIGHT: 930 MM -DIAMETER: 520 MM BLADE SPEED: 1000 M/MIN -SIZE SAWS: 900 X 1100 X 197 -THE POWER OF THE ACTUAL MOTOR 400 V: 3 KM/S1 100% -RATED ENGINE POWER 400 V: 5.7 KM/S6 40% -WEIGHT 230 KG BASIC EQUIPMENT -SUCTION PIPE FOR WED. 100 MM -TAPE 20 MM SAW BLADES AND TOOTH PITCH 7 MM THE CHARACTERISTICS OF THE LARGE CLAMPING DEVICE FOR PRECISION CUTS SPECIAL BLOCKED WITH ECCENTRICITIES BALANCED WHEELS MADE OF CAST IRON AND COATED WITH EMBOSSED POLYURETHANE COATING WITH A VERY LONG BATTERY LIFE A VERY LARGE TABLE SAWS MADE OF CAST IRON; THE POSSIBILITY OF DOUBLE SWING, BY VERY MASSIVE Pó?KSI??YCOWE SEGMENTS EACH SAW IS EQUIPPED WITH A BUILT-IN SCALE TO ACCURATELY READ THE CUTTING HEIGHT CONTROL WINDOW ALLOWS YOU TO EASILY SET THE RUN TAPE ACCURATE AND VERY EASY TO SET THE CUTTING HEIGHT AS WELL AS THE UPPER IDLER BY MANUAL KNOB AND GEAR GUIDES TENSIONING STRAP WITH A LARGE CAST IRON KNOBS, EASY TO READ THE VALUE OF THE TENSION OF THE TAPE ADJUSTABLE CLAMPING DEVICE FOR CUTTING FOR ± 60 ° PRECISE CLAMPING DEVICE FOR LONGITUDINAL CUTS ON/OFF SWITCH WITH OVERLOAD PROTECTION ACCURATE UPPER AND LOWER BELT GUIDANCE
Vendedor: StanDrew
Año de construcción: usado
Precio: 14.500 €
Ubicación: Land-; lift height[mm]: 1000; maximum lift capacity [kg]: 6000 ; LIFT HEIGHT[MM]: 1000; MAXIMUM LIFT CAPACITY [KG]: 6000
Vendedor: Biringer International GmbH
Año de construcción: usado
Ubicación: Land-
sharpener knife profile weinig randomat r920

-machine in stock
-after reviewing the technical
-very good condition
-ideal for profile knives

technical parameters:

-the maximum diameter 250 mm head
-maximum length of 240 head m
-interchangeable spindle

-the diameter of the grinding wheel min./maks.150 mm/225 mm
-the width of the grinding wheel (ceramic, borazonowa, diamond) 2-3-4-10 mm
-spindle 60 mm

-feeding motor power 0.65 kw
-drive grinding wheel 3 x 0, 55kw
-speed grinding wheel fixed

-diameter exhaust 70 mm
-heads, adjustable in 2 axes
-electric infeed spindle to another unit

high precision grinding machine for sharpening and production profile knives steel hss or hm according to the template. for tools powerlock-as well as the standard knife heads. knife sharpening straight and profile in the heads. • adjusting the angle of the sharpening provides accuracy and save time. SHARPENER KNIFE PROFILE WEINIG RANDOMAT R920 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -IDEAL FOR PROFILE KNIVES TECHNICAL PARAMETERS: -THE MAXIMUM DIAMETER 250 MM HEAD -MAXIMUM LENGTH OF 240 HEAD M -INTERCHANGEABLE SPINDLE -THE DIAMETER OF THE GRINDING WHEEL MIN./MAKS.150 MM/225 MM -THE WIDTH OF THE GRINDING WHEEL (CERAMIC, BORAZONOWA, DIAMOND) 2-3-4-10 MM -SPINDLE 60 MM -FEEDING MOTOR POWER 0.65 KW -DRIVE GRINDING WHEEL 3 X 0, 55KW -SPEED GRINDING WHEEL FIXED -DIAMETER EXHAUST 70 MM -HEADS, ADJUSTABLE IN 2 AXES -ELECTRIC INFEED SPINDLE TO ANOTHER UNIT HIGH PRECISION GRINDING MACHINE FOR SHARPENING AND PRODUCTION PROFILE KNIVES STEEL HSS OR HM ACCORDING TO THE TEMPLATE. FOR TOOLS POWERLOCK-AS WELL AS THE STANDARD KNIFE HEADS. KNIFE SHARPENING STRAIGHT AND PROFILE IN THE HEADS. • ADJUSTING THE ANGLE OF THE SHARPENING PROVIDES ACCURACY AND SAVE TIME.
Vendedor: StanDrew
Año de construcción: usado
Precio: used machinery auction RESALE 5.400 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 2700 x 800 x 1300 mm<br/>description: - production number: ahe 1174<br> - operating voltage: 380 v, ~3, 50 hz<br> - total connected load: 1,75 kw<br> -motor speed of main drive spindle: 1500/300 rpm<br> - with control system schenck cab 820<br> - test piece weight: from 10 up to 320 kg<br> - overload capacity at symmetrical loading up to: 400 kg<br> - onderload up to: random<br> - test piece diameter: max. 1260 mm<br> - bearing distance between centre of bearings: max. 2300 mm<br> - bearing pins diameter: 10 - 160 mm<br> - type of bearing: carrier rollers<br> - type of unbalance display : digital<br> - type of layer arrangement: two layers<br> - balancing speed: switchable 600/920/1200/1840 rpm at a diameter of 100 mm<br> - range of gage: approx. 1:500.000 mm<br> - bed length: 2500 mm<br> - drive: belt drive<br> - type of drive: electrical<br> - the machine will be presumably available in june 2019. therefore the pick up has to take place on a date to be agreed.<br> - see video as well as pdf WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 2700 X 800 X 1300 MM
DESCRIPTION: - PRODUCTION NUMBER: AHE 1174
- OPERATING VOLTAGE: 380 V, ~3, 50 HZ
- TOTAL CONNECTED LOAD: 1,75 KW
-MOTOR SPEED OF MAIN DRIVE SPINDLE: 1500/300 RPM
- WITH CONTROL SYSTEM SCHENCK CAB 820
- TEST PIECE WEIGHT: FROM 10 UP TO 320 KG
- OVERLOAD CAPACITY AT SYMMETRICAL LOADING UP TO: 400 KG
- ONDERLOAD UP TO: RANDOM
- TEST PIECE DIAMETER: MAX. 1260 MM
- BEARING DISTANCE BETWEEN CENTRE OF BEARINGS: MAX. 2300 MM
- BEARING PINS DIAMETER: 10 - 160 MM
- TYPE OF BEARING: CARRIER ROLLERS
- TYPE OF UNBALANCE DISPLAY : DIGITAL
- TYPE OF LAYER ARRANGEMENT: TWO LAYERS
- BALANCING SPEED: SWITCHABLE 600/920/1200/1840 RPM AT A DIAMETER OF 100 MM
- RANGE OF GAGE: APPROX. 1:500.000 MM
- BED LENGTH: 2500 MM
- DRIVE: BELT DRIVE
- TYPE OF DRIVE: ELECTRICAL
- THE MACHINE WILL BE PRESUMABLY AVAILABLE IN JUNE 2019. THEREFORE THE PICK UP HAS TO TAKE PLACE ON A DATE TO BE AGREED.
- SEE VIDEO AS WELL AS PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-frame width: 710 (mm)
stroke: 550 (mm)
max feed: 15 (m/min)

features:
-width adjustment
-electric feed
-electronically controlled automatic high pressure lubrication
-coupled safety device to release of the flywheel cover and simultaneous frame fixation
-hydraulic roller lift
-electric motor 7.5 kw to the full hydraulic drive
-electric remote control for rolling elevation and feed regulation
-single disc drive and band brake
-double wedges to the precise adjustment of the guides
	
construction:
-stress-free main stand in steel, cold rolled
-chassis beams made of special steel, one-piece machined
-profile stilts with roller and cylindrical roller bearings and sleeves
-main shaft with bireme tonnes bearings
-racks and elevator shaft full steel milled.
â??
amenities:
-door covers - all steel due with drive
-master strength indicator

1 hydraulic brake 1 drive unit 90 kw 1 steel pulley
1 set of motor rails in steel

1 flat belt with complete star-triangle switch and overload relays in the housing

1 print register 
 FRAME WIDTH: 710 (MM) STROKE: 550 (MM) MAX FEED: 15 (M/MIN) FEATURES: -WIDTH ADJUSTMENT -ELECTRIC FEED -ELECTRONICALLY CONTROLLED AUTOMATIC HIGH PRESSURE LUBRICATION -COUPLED SAFETY DEVICE TO RELEASE OF THE FLYWHEEL COVER AND SIMULTANEOUS FRAME FIXATION -HYDRAULIC ROLLER LIFT -ELECTRIC MOTOR 7.5 KW TO THE FULL HYDRAULIC DRIVE -ELECTRIC REMOTE CONTROL FOR ROLLING ELEVATION AND FEED REGULATION -SINGLE DISC DRIVE AND BAND BRAKE -DOUBLE WEDGES TO THE PRECISE ADJUSTMENT OF THE GUIDES CONSTRUCTION: -STRESS-FREE MAIN STAND IN STEEL, COLD ROLLED -CHASSIS BEAMS MADE OF SPECIAL STEEL, ONE-PIECE MACHINED -PROFILE STILTS WITH ROLLER AND CYLINDRICAL ROLLER BEARINGS AND SLEEVES -MAIN SHAFT WITH BIREME TONNES BEARINGS -RACKS AND ELEVATOR SHAFT FULL STEEL MILLED. &ACIRC;?? AMENITIES: -DOOR COVERS - ALL STEEL DUE WITH DRIVE -MASTER STRENGTH INDICATOR 1 HYDRAULIC BRAKE 1 DRIVE UNIT 90 KW 1 STEEL PULLEY 1 SET OF MOTOR RAILS IN STEEL 1 FLAT BELT WITH COMPLETE STAR-TRIANGLE SWITCH AND OVERLOAD RELAYS IN THE HOUSING 1 PRINT REGISTER
Vendedor: Simon Möhringer Anlagenbau GmbH
Año de construcción: usado
Ubicación: Land-x-travel:1500 mm<br/>y-travel:800 mm<br/>z-travel:680 mm<br/>table-size:1700x800 mm<br/>max. table load:1250 kg<br/>distance spindle center to column:868 mm<br/>distance spindle center to table:150-830 mm<br/>rapid traverse in x-y-z axis:30/30/24 m<br/>spindle speeds:6000 1/min<br/>max. torque on the spindle:111/135 nm<br/>spindle drive:15/18,5 kw<br/>positioning accuracy:0,012 mm<br/>repeating accuracy:0,008 mm<br/>tool taper:50 bt<br/>max. tool weight:15 kg<br/>workpiece length:350 mm<br/>tool diameter:110 mm<br/>air pressure - required:6-8 bar<br/>coolant capacity:400 l<br/>dimensions:5800x3090x3495 mm<br/>weight of the machine ca.:13 t<br/>total power requirement:35 kva<br/>power of feed servo motor :22 nm<br/>linear guide: <br/>cnc controller:fanuc 0i mf oder siemens 828 <br/>coolant system: <br/>chip conveyor with chip bucket: <br/>automatic tool changer:24 fach<br/>alarm stack light: <br/>tech. documentation: <br/>ce-design:option <br/>foundation: <br/>: <br/>led work light: <br/>mpg hand wheel: <br/>air conditioner for cabinet: <br/>spindle air purge: <br/>: <br/>tool measuring system:option <br/>cts:option <br/><br/>brand-new cnc vertical machining center with cnc control siemens 828d with shopmill.  incl. the following standard accessories:  cnc control siemens 828d with shopmill including 2-year warranty 1 piece coolant system 1 piece automatic 24-fold tool changer  1 piece halogen machine lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off linear guide (vl-serie) from thk or rexroth 1 set of operating manual with spare parts list in german language 400v, 50cps, 3 phs ce version incl. ce declaration of conformity belt drive with 10.000 u/min door interlock 8,4? screen spindle chiller coolant through spindle center tool setter (blum)  more information can be found in the appendix. X-TRAVEL:1500 MM
Y-TRAVEL:800 MM
Z-TRAVEL:680 MM
TABLE-SIZE:1700X800 MM
MAX. TABLE LOAD:1250 KG
DISTANCE SPINDLE CENTER TO COLUMN:868 MM
DISTANCE SPINDLE CENTER TO TABLE:150-830 MM
RAPID TRAVERSE IN X-Y-Z AXIS:30/30/24 M
SPINDLE SPEEDS:6000 1/MIN
MAX. TORQUE ON THE SPINDLE:111/135 NM
SPINDLE DRIVE:15/18,5 KW
POSITIONING ACCURACY:0,012 MM
REPEATING ACCURACY:0,008 MM
TOOL TAPER:50 BT
MAX. TOOL WEIGHT:15 KG
WORKPIECE LENGTH:350 MM
TOOL DIAMETER:110 MM
AIR PRESSURE - REQUIRED:6-8 BAR
COOLANT CAPACITY:400 L
DIMENSIONS:5800X3090X3495 MM
WEIGHT OF THE MACHINE CA.:13 T
TOTAL POWER REQUIREMENT:35 KVA
POWER OF FEED SERVO MOTOR :22 NM
LINEAR GUIDE:
CNC CONTROLLER:FANUC 0I MF ODER SIEMENS 828
COOLANT SYSTEM:
CHIP CONVEYOR WITH CHIP BUCKET:
AUTOMATIC TOOL CHANGER:24 FACH
ALARM STACK LIGHT:
TECH. DOCUMENTATION:
CE-DESIGN:OPTION
FOUNDATION:
:
LED WORK LIGHT:
MPG HAND WHEEL:
AIR CONDITIONER FOR CABINET:
SPINDLE AIR PURGE:
:
TOOL MEASURING SYSTEM:OPTION
CTS:OPTION

BRAND-NEW CNC VERTICAL MACHINING CENTER WITH CNC CONTROL SIEMENS 828D WITH SHOPMILL. INCL. THE FOLLOWING STANDARD ACCESSORIES: CNC CONTROL SIEMENS 828D WITH SHOPMILL INCLUDING 2-YEAR WARRANTY 1 PIECE COOLANT SYSTEM 1 PIECE AUTOMATIC 24-FOLD TOOL CHANGER 1 PIECE HALOGEN MACHINE LAMP 1 PIECE ALARM / INDICATOR LAMP RIGID TAPPING 1 SET OF TOOLS 1 PIECE CHIP CONVEYOR (CHAIN) 1 PIECE TOOL SET (WATER GUN, AIR GUN) 1 SET FOUNDATION BLOCKS AND FIXTURE SCREWS HEAT EXCHANGER FOR ELECTRIC CABINET AUTOMATIC LUBRICATION SYSTEM FULL ENCLOSURE GUARD AUTOMATIC POWER OFF LINEAR GUIDE (VL-SERIE) FROM THK OR REXROTH 1 SET OF OPERATING MANUAL WITH SPARE PARTS LIST IN GERMAN LANGUAGE 400V, 50CPS, 3 PHS CE VERSION INCL. CE DECLARATION OF CONFORMITY BELT DRIVE WITH 10.000 U/MIN DOOR INTERLOCK 8,4? SCREEN SPINDLE CHILLER COOLANT THROUGH SPINDLE CENTER TOOL SETTER (BLUM) MORE INFORMATION CAN BE FOUND IN THE APPENDIX.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-year of manufacture 2004
-dtr

technical parameters:

-working width 950 mm
-min./max. application thickness: 4-170 mm

-sanding belt length 1525 mm

main engine power-11 kw

-diameter 120 mm
-performance dust collector 1560 m3/h 2313 pa
-operating pressure 8 bar

standard equipment:

-control panel
– electric working height adjustment
-digital readout of the working thickness

-feed belt made of natural rubber
-moving, clean the rubber pressure rollers in front of and behind the working unit
-vertical roll at the entrance, at the first station, to prevent the sudden retreat of the elements

-pneumatic abrasive belt oscillation
- -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -YEAR OF MANUFACTURE 2004 -DTR TECHNICAL PARAMETERS: -WORKING WIDTH 950 MM -MIN./MAX. APPLICATION THICKNESS: 4-170 MM -SANDING BELT LENGTH 1525 MM MAIN ENGINE POWER-11 KW -DIAMETER 120 MM -PERFORMANCE DUST COLLECTOR 1560 M3/H 2313 PA -OPERATING PRESSURE 8 BAR STANDARD EQUIPMENT: -CONTROL PANEL – ELECTRIC WORKING HEIGHT ADJUSTMENT -DIGITAL READOUT OF THE WORKING THICKNESS -FEED BELT MADE OF NATURAL RUBBER -MOVING, CLEAN THE RUBBER PRESSURE ROLLERS IN FRONT OF AND BEHIND THE WORKING UNIT -VERTICAL ROLL AT THE ENTRANCE, AT THE FIRST STATION, TO PREVENT THE SUDDEN RETREAT OF THE ELEMENTS -PNEUMATIC ABRASIVE BELT OSCILLATION -"COVER" SAFETY DEVICE INPUT ELEMENT TO THE MACHINE -SAFETY SWITCHES ON THE FRONT AND THE REAR OF THE MACHINE -LOCKABLE MAIN SWITCH -DIRECT THE INCLUSION OF MAIN ENGINE -PROTECTION AGAINST OVERLOAD-THE MAIN MOTOR -AUTOMATIC BRAKE TO THE IMMEDIATE EXCLUSION OF THE WORK UNIT; OVERALL DIMENSIONS: -LENGTH: 153 CM -WIDTH: 133 CM -HEIGHT 200 CM -WEIGHT ~ 680 KG
Vendedor: StanDrew
Año de construcción: usado
Precio: 9.900 €
Ubicación: Land-DE Germany, 37120 Bovenden
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land--ce certificate,
-guarantee and post-guarantee service
-new machine, in stock

technical parameters:

-chain width 350 mm
-cutting height 10-170 mm

– max. saw blade diameter Ø 505 mm
– min. diameter of the saw blade Ø 355 mm
-barrel diameter saws Ø 80 mm
-major axis diameter Ø 60 mm

-min. length of the cut item 740 mm
-table dimensions 1910 x 790 mm
-number of revolutions 2600/min
-feed 2.5-24 m/min.

-engine automatic adjustment of cutting thickness 0, 75kw
-feed motor with automatic dismissal in case of overloads 4 kw
-total power 55 kw

-digital display of speed podawczej
-exit exhaust fi 150 x 2 pcs.
-demand for air suction 25-35 m/s

dimensions:

-the length of the 4460mm
width 1780mm
-height 1880mm

-weight 3500 kg

table – input and output

-option at extra costs – 2500 z? net
-table length 120 cm -CE CERTIFICATE, -GUARANTEE AND POST-GUARANTEE SERVICE -NEW MACHINE, IN STOCK TECHNICAL PARAMETERS: -CHAIN WIDTH 350 MM -CUTTING HEIGHT 10-170 MM – MAX. SAW BLADE DIAMETER Ø 505 MM – MIN. DIAMETER OF THE SAW BLADE Ø 355 MM -BARREL DIAMETER SAWS Ø 80 MM -MAJOR AXIS DIAMETER Ø 60 MM -MIN. LENGTH OF THE CUT ITEM 740 MM -TABLE DIMENSIONS 1910 X 790 MM -NUMBER OF REVOLUTIONS 2600/MIN -FEED 2.5-24 M/MIN. -ENGINE AUTOMATIC ADJUSTMENT OF CUTTING THICKNESS 0, 75KW -FEED MOTOR WITH AUTOMATIC DISMISSAL IN CASE OF OVERLOADS 4 KW -TOTAL POWER 55 KW -DIGITAL DISPLAY OF SPEED PODAWCZEJ -EXIT EXHAUST FI 150 X 2 PCS. -DEMAND FOR AIR SUCTION 25-35 M/S DIMENSIONS: -THE LENGTH OF THE 4460MM WIDTH 1780MM -HEIGHT 1880MM -WEIGHT 3500 KG TABLE – INPUT AND OUTPUT -OPTION AT EXTRA COSTS – 2500 Z? NET -TABLE LENGTH 120 CM
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-pressure:    250 t<br/>distance between columns:  mm<br/>stroke:    250 mm<br/>--------------------------------------------------:  <br/>press forces:  <br/>- total force (nominal):    250 to<br/>press table:  <br/>- table surface (left-right):   2200 mm<br/>- table surface (front-back):   1200 mm<br/>slide:  <br/>- table surface (left-right):   2200 mm<br/>- table surface (front-back):   1200 mm<br/>- stroke:    250 mm<br/>slide (mechan. press):  <br/>- slide adjustment:    500 mm<br/>- stroke rate (min.):     25 /min<br/>- stroke rate (max.):     50 /min<br/>- hydraulic overload protection: yes:        <br/>ejector (table ejector):  <br/>- number of ejectors:     18  <br/>- nominal force:    3.9 to<br/>- stroke:     60 mm<br/>tool assembly dimensions:  <br/>- shut height (stroke down, adjustment up), bdc:   1080 mm<br/>leveller unit:  <br/>- sheet width max:   1000 mm<br/>- sheet thickness max:    2.5 mm<br/>- sheet thickness (min):    0.3 mm<br/>- feed velocity max.:     30 m/min<br/>attachments (presses):  <br/>- moving bolster design: front-back:        <br/><br/><br/><br/><br/> PRESSURE: 250 T
DISTANCE BETWEEN COLUMNS: MM
STROKE: 250 MM
--------------------------------------------------:
PRESS FORCES:
- TOTAL FORCE (NOMINAL): 250 TO
PRESS TABLE:
- TABLE SURFACE (LEFT-RIGHT): 2200 MM
- TABLE SURFACE (FRONT-BACK): 1200 MM
SLIDE:
- TABLE SURFACE (LEFT-RIGHT): 2200 MM
- TABLE SURFACE (FRONT-BACK): 1200 MM
- STROKE: 250 MM
SLIDE (MECHAN. PRESS):
- SLIDE ADJUSTMENT: 500 MM
- STROKE RATE (MIN.): 25 /MIN
- STROKE RATE (MAX.): 50 /MIN
- HYDRAULIC OVERLOAD PROTECTION: YES:
EJECTOR (TABLE EJECTOR):
- NUMBER OF EJECTORS: 18
- NOMINAL FORCE: 3.9 TO
- STROKE: 60 MM
TOOL ASSEMBLY DIMENSIONS:
- SHUT HEIGHT (STROKE DOWN, ADJUSTMENT UP), BDC: 1080 MM
LEVELLER UNIT:
- SHEET WIDTH MAX: 1000 MM
- SHEET THICKNESS MAX: 2.5 MM
- SHEET THICKNESS (MIN): 0.3 MM
- FEED VELOCITY MAX.: 30 M/MIN
ATTACHMENTS (PRESSES):
- MOVING BOLSTER DESIGN: FRONT-BACK:




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-cnc turning / milling center
manufacturer: gildemeister
type: gmx 400
year of construction: 2008
control: siemens 840 d powerline
swing above bed: 640
plan travel: 1500
spindle bore: 107
power: 100% 36 kw, 40% 45 kw
speed range: up to 4,000

turning/milling spindle rpm: 12.000 rpm
main spindle spindle diameter: nc tailstock: quill mk 5 tool magazine: 120:.

facilities:
tool carrier above: - with turning and milling spindle as the motor spindle.
-recording capto6 7 axis: spindle: with hollow clamping device 68 mm
 
sub-spindle: with spindle motor ism 65
                                                                       -power 25/37 kw - part hollow clamping cylinder 635 mm deep (hydraulic) 
                                                                       -train tube diameter 68 mm
                                                                       -c axis and spindle brake (hydraulic) additional magazine about the counter spindle: - with 3 tool stations max d = 88 m x 600 mm lg.

tool monitoring system:-company of artis, type ctm high pressure coolant unit 8/28/80 - 8 bar, 20 l/min turning/milling outside.
                                                                      -20 bar, 40l / min & 80 bar, 11 l / min turning/milling spindle inside.
                                                                       -8 bar, 20l / min & 20 bar, 40 l/min for the revolver. 
                                                                       - or 8 bar, 20l / min for the bezel
-via m-function can be selected. 
-coolant tank 980 litres
-band filter system filter unit 40 âµm - immersion cooler 4,5 kw - level monitoring chip conveyor: - scratch version indicator: - 3 x, colored coolant spray gun :

-automatic schiebeschutztã¼ren:-(firma landert)

oil mist separator ifs:-type ife

differential pressure for main spindle

differential pressure for the counter spindle

overload clutches x 1, ys, x 2, z2

conveyor belt for finished parts, promoting to the right, with plastic coating.

connector for bar feeder or bar feeder errors excepted.
 
	
			

 CNC TURNING / MILLING CENTER MANUFACTURER: GILDEMEISTER TYPE: GMX 400 YEAR OF CONSTRUCTION: 2008 CONTROL: SIEMENS 840 D POWERLINE SWING ABOVE BED: 640 PLAN TRAVEL: 1500 SPINDLE BORE: 107 POWER: 100% 36 KW, 40% 45 KW SPEED RANGE: UP TO 4,000 TURNING/MILLING SPINDLE RPM: 12.000 RPM MAIN SPINDLE SPINDLE DIAMETER: NC TAILSTOCK: QUILL MK 5 TOOL MAGAZINE: 120:. FACILITIES: TOOL CARRIER ABOVE: - WITH TURNING AND MILLING SPINDLE AS THE MOTOR SPINDLE. -RECORDING CAPTO6 7 AXIS: SPINDLE: WITH HOLLOW CLAMPING DEVICE 68 MM SUB-SPINDLE: WITH SPINDLE MOTOR ISM 65 -POWER 25/37 KW - PART HOLLOW CLAMPING CYLINDER 635 MM DEEP (HYDRAULIC) -TRAIN TUBE DIAMETER 68 MM -C AXIS AND SPINDLE BRAKE (HYDRAULIC) ADDITIONAL MAGAZINE ABOUT THE COUNTER SPINDLE: - WITH 3 TOOL STATIONS MAX D = 88 M X 600 MM LG. TOOL MONITORING SYSTEM:-COMPANY OF ARTIS, TYPE CTM HIGH PRESSURE COOLANT UNIT 8/28/80 - 8 BAR, 20 L/MIN TURNING/MILLING OUTSIDE. -20 BAR, 40L / MIN & 80 BAR, 11 L / MIN TURNING/MILLING SPINDLE INSIDE. -8 BAR, 20L / MIN & 20 BAR, 40 L/MIN FOR THE REVOLVER. - OR 8 BAR, 20L / MIN FOR THE BEZEL -VIA M-FUNCTION CAN BE SELECTED. -COOLANT TANK 980 LITRES -BAND FILTER SYSTEM FILTER UNIT 40 &ACIRC;&MICRO;M - IMMERSION COOLER 4,5 KW - LEVEL MONITORING CHIP CONVEYOR: - SCRATCH VERSION INDICATOR: - 3 X, COLORED COOLANT SPRAY GUN : -AUTOMATIC SCHIEBESCHUTZT&ATILDE;&FRAC14;REN:-(FIRMA LANDERT) OIL MIST SEPARATOR IFS:-TYPE IFE DIFFERENTIAL PRESSURE FOR MAIN SPINDLE DIFFERENTIAL PRESSURE FOR THE COUNTER SPINDLE OVERLOAD CLUTCHES X 1, YS, X 2, Z2 CONVEYOR BELT FOR FINISHED PARTS, PROMOTING TO THE RIGHT, WITH PLASTIC COATING. CONNECTOR FOR BAR FEEDER OR BAR FEEDER ERRORS EXCEPTED.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-:hbm-130 | hbm-130l | hbm-130xl <br/>spindle diameter:130|130|130 mm<br/>x-travel:1600|2000|2000 mm<br/>y-travel:1400|1800|1800 mm<br/>z-travel:2000 mm<br/>u-axis:250 mm<br/>w-axis (spindle longitudinal):900 mm<br/>max. torque on the spindle:3200 nm<br/>b-axis (table):360x1 °<br/>rapid speed:x/y/z/w: 2500 mm/min<br/>table load:8|10|10 t<br/>table-size:1600 x 1400|1800 x 1600|2200 x 2000 mm<br/>t-slots:9/11/12 stk.<br/>t-slot - width:28 mm<br/>transmission ratio:4 stk.<br/>spindle speed:4-800 1/min<br/>spindle taper:50 iso<br/>faceplate:drehmoment: 4900 nm<br/>faceplate:2.5-125 1/min<br/>faceplate:umdrehung stufenlos einstellbar <br/>faceplate:Ø:750 mm<br/>weight of the machine ca.:22,5|24,5|25,5 t<br/>main drive:22 kw<br/>machine size (lxwxh):6995/3647/342|7030/4665/3800|7030/4665/3800 mm<br/>2-axis dro : <br/>hydr. table clamping: <br/>european electric: <br/>plc control:siemens s7 <br/>: <br/>metric, 400v 50hz 3 phase: <br/>ce-design: <br/>: <br/>hydr. clamping of the axes: <br/>central lubrication for the guideways: <br/>faceplate: <br/>servo motors:von siemens/fanuc/fagor <br/>angular milling head: <br/>universal milling head: <br/>splash guards: <br/>spindle holder: <br/>: <br/>: <br/><br/>technical offer of hbm-130 ? powerful servo spindle motor and four spindle speed rang, stepless in each range. much lower     maintenance and 80% failure rate reduced ? high rigidity spindle could insure the strong machining ? worktable 4x90° position by the collimator ? x,y, z, b axes dro are available ? spindle could choose iso50, with automatic clamping   1. introduce the horizontal boring and milling machine series hbm-130 of our company is suitable for such operation as drilling, counter-boring, boring, reaming, spot-facing, tapping and milling etc. also the horizontal boring and milling machine type is equipped with fixed facing head on which radial facing slide can be radically feed consequently to enable the machine to undertake boring of large-diameter hole, external cutting ,end face turning and recessing, etc. the machine is composed of bed, front column, headstock, cross and longitudinal saddle, worktable, back column and balance weight pulley etc. the vertical movement of headstock goes along the column\'s guideway, the worktable can move transversely and longitudinally on the bed, and the worktable can be rotated.  the characteristics of hbm-130   2.1 the big servo spindle 22kw motor supply continuously speed change and high torque output of       headstock.       four speed range can be changed by the selector on the control panel.       the infinit speed change in each range can be effected continuously and smoothly. it?s very simple and      convenient for machine operation.      compare with old headstock structure, 24 steps speed changing by hydraulic, the failure rate will be reduced 80%.    2.2 the vertical coordinate ( headstock lifting direction ) and cross coordinate ( worktable transverse movement ) and longitudinal coordinate ( worktable longitudinal movement--option ) are provided with new type digital read out unit with memory function, which makes the machine with complete function and high accuracy.   2.3 main parts of the machine such as bed, front column and guideways of longitudinal saddle are all hardened and ground, which bring high stiffness of the guideways and extend the using life of the machine.   2.4 the horizontal guideway surface of the machine is provided with all pull-board type dust-proof.   2.5 electric-hydraulic interlocking device will be fixed between the moving units and when a moving unit is working, the other moving units will be clamped automatically (except spindle, radial facing slide).   2.6 in the rapid traverse gearbox, safety clutches are installed to prevent the machine from overload.  3. transmission systems of the machine 3.1 headstock transmission       the rotation movement of boring spindle are driven by ctb servo spindle motor directly. insteady of old design, 24 steps spindle speed, the spindle servo motor supply two range speed. low spindle speed with big torque output and high spindle speed with stable and continuously cutting forece. 3.2 feed motion   the feed motion of all moving units of this machine is feeding per spindle revolution (e.g. traverse rate of spindle, headstock, table per spindle revolution).the power of various moving units comes from shaft driven by main driven motor. it can be transmitted through gears of speed-change device to shaft (the feed safety mechanism). after that the motion will be transmitted further through the forward and reverse mechanism, to the feed shaft, then to the lead-screw or gear racks of various moving units, enable the headstock, cross & longitudinal saddles to obtain each 18 steps feed rates at low and high gear respectively.   the feed motion of the radial slide on the facing head comes from headstock, enable it to obtain various feed rates. 3.3 rapid transmission system   the rapid moving of the headstock,cross & longitudinal saddles of the machine and the rapid rotation of the rotary worktable are driven by ac motor mounted at the right side of the bed. power from the motor is transmitted from shafts coupling and friction clutch to each moving units respectively, enable the spindle, headstock and cross & longitudinal saddles to obtain the rapid moving speed 2500mm/min, the rapid rotation of the worktable is 1r/min.  4. hydraulic system of the machine   the hydraulic system is located inside of longitudinal saddle of the machine, which is used for the transverse of headstock, longitudinal & cross movement, rotation of worktable, feed speed change and internal lubrication of headstock    :HBM-130 | HBM-130L | HBM-130XL
SPINDLE DIAMETER:130|130|130 MM
X-TRAVEL:1600|2000|2000 MM
Y-TRAVEL:1400|1800|1800 MM
Z-TRAVEL:2000 MM
U-AXIS:250 MM
W-AXIS (SPINDLE LONGITUDINAL):900 MM
MAX. TORQUE ON THE SPINDLE:3200 NM
B-AXIS (TABLE):360X1 °
RAPID SPEED:X/Y/Z/W: 2500 MM/MIN
TABLE LOAD:8|10|10 T
TABLE-SIZE:1600 X 1400|1800 X 1600|2200 X 2000 MM
T-SLOTS:9/11/12 STK.
T-SLOT - WIDTH:28 MM
TRANSMISSION RATIO:4 STK.
SPINDLE SPEED:4-800 1/MIN
SPINDLE TAPER:50 ISO
FACEPLATE:DREHMOMENT: 4900 NM
FACEPLATE:2.5-125 1/MIN
FACEPLATE:UMDREHUNG STUFENLOS EINSTELLBAR
FACEPLATE:Ø:750 MM
WEIGHT OF THE MACHINE CA.:22,5|24,5|25,5 T
MAIN DRIVE:22 KW
MACHINE SIZE (LXWXH):6995/3647/342|7030/4665/3800|7030/4665/3800 MM
2-AXIS DRO :
HYDR. TABLE CLAMPING:
EUROPEAN ELECTRIC:
PLC CONTROL:SIEMENS S7
:
METRIC, 400V 50HZ 3 PHASE:
CE-DESIGN:
:
HYDR. CLAMPING OF THE AXES:
CENTRAL LUBRICATION FOR THE GUIDEWAYS:
FACEPLATE:
SERVO MOTORS:VON SIEMENS/FANUC/FAGOR
ANGULAR MILLING HEAD:
UNIVERSAL MILLING HEAD:
SPLASH GUARDS:
SPINDLE HOLDER:
:
:

TECHNICAL OFFER OF HBM-130 ? POWERFUL SERVO SPINDLE MOTOR AND FOUR SPINDLE SPEED RANG, STEPLESS IN EACH RANGE. MUCH LOWER MAINTENANCE AND 80% FAILURE RATE REDUCED ? HIGH RIGIDITY SPINDLE COULD INSURE THE STRONG MACHINING ? WORKTABLE 4X90° POSITION BY THE COLLIMATOR ? X,Y, Z, B AXES DRO ARE AVAILABLE ? SPINDLE COULD CHOOSE ISO50, WITH AUTOMATIC CLAMPING 1. INTRODUCE THE HORIZONTAL BORING AND MILLING MACHINE SERIES HBM-130 OF OUR COMPANY IS SUITABLE FOR SUCH OPERATION AS DRILLING, COUNTER-BORING, BORING, REAMING, SPOT-FACING, TAPPING AND MILLING ETC. ALSO THE HORIZONTAL BORING AND MILLING MACHINE TYPE IS EQUIPPED WITH FIXED FACING HEAD ON WHICH RADIAL FACING SLIDE CAN BE RADICALLY FEED CONSEQUENTLY TO ENABLE THE MACHINE TO UNDERTAKE BORING OF LARGE-DIAMETER HOLE, EXTERNAL CUTTING ,END FACE TURNING AND RECESSING, ETC. THE MACHINE IS COMPOSED OF BED, FRONT COLUMN, HEADSTOCK, CROSS AND LONGITUDINAL SADDLE, WORKTABLE, BACK COLUMN AND BALANCE WEIGHT PULLEY ETC. THE VERTICAL MOVEMENT OF HEADSTOCK GOES ALONG THE COLUMN\'S GUIDEWAY, THE WORKTABLE CAN MOVE TRANSVERSELY AND LONGITUDINALLY ON THE BED, AND THE WORKTABLE CAN BE ROTATED. THE CHARACTERISTICS OF HBM-130 2.1 THE BIG SERVO SPINDLE 22KW MOTOR SUPPLY CONTINUOUSLY SPEED CHANGE AND HIGH TORQUE OUTPUT OF HEADSTOCK. FOUR SPEED RANGE CAN BE CHANGED BY THE SELECTOR ON THE CONTROL PANEL. THE INFINIT SPEED CHANGE IN EACH RANGE CAN BE EFFECTED CONTINUOUSLY AND SMOOTHLY. IT?S VERY SIMPLE AND CONVENIENT FOR MACHINE OPERATION. COMPARE WITH OLD HEADSTOCK STRUCTURE, 24 STEPS SPEED CHANGING BY HYDRAULIC, THE FAILURE RATE WILL BE REDUCED 80%. 2.2 THE VERTICAL COORDINATE ( HEADSTOCK LIFTING DIRECTION ) AND CROSS COORDINATE ( WORKTABLE TRANSVERSE MOVEMENT ) AND LONGITUDINAL COORDINATE ( WORKTABLE LONGITUDINAL MOVEMENT--OPTION ) ARE PROVIDED WITH NEW TYPE DIGITAL READ OUT UNIT WITH MEMORY FUNCTION, WHICH MAKES THE MACHINE WITH COMPLETE FUNCTION AND HIGH ACCURACY. 2.3 MAIN PARTS OF THE MACHINE SUCH AS BED, FRONT COLUMN AND GUIDEWAYS OF LONGITUDINAL SADDLE ARE ALL HARDENED AND GROUND, WHICH BRING HIGH STIFFNESS OF THE GUIDEWAYS AND EXTEND THE USING LIFE OF THE MACHINE. 2.4 THE HORIZONTAL GUIDEWAY SURFACE OF THE MACHINE IS PROVIDED WITH ALL PULL-BOARD TYPE DUST-PROOF. 2.5 ELECTRIC-HYDRAULIC INTERLOCKING DEVICE WILL BE FIXED BETWEEN THE MOVING UNITS AND WHEN A MOVING UNIT IS WORKING, THE OTHER MOVING UNITS WILL BE CLAMPED AUTOMATICALLY (EXCEPT SPINDLE, RADIAL FACING SLIDE). 2.6 IN THE RAPID TRAVERSE GEARBOX, SAFETY CLUTCHES ARE INSTALLED TO PREVENT THE MACHINE FROM OVERLOAD. 3. TRANSMISSION SYSTEMS OF THE MACHINE 3.1 HEADSTOCK TRANSMISSION THE ROTATION MOVEMENT OF BORING SPINDLE ARE DRIVEN BY CTB SERVO SPINDLE MOTOR DIRECTLY. INSTEADY OF OLD DESIGN, 24 STEPS SPINDLE SPEED, THE SPINDLE SERVO MOTOR SUPPLY TWO RANGE SPEED. LOW SPINDLE SPEED WITH BIG TORQUE OUTPUT AND HIGH SPINDLE SPEED WITH STABLE AND CONTINUOUSLY CUTTING FORECE. 3.2 FEED MOTION THE FEED MOTION OF ALL MOVING UNITS OF THIS MACHINE IS FEEDING PER SPINDLE REVOLUTION (E.G. TRAVERSE RATE OF SPINDLE, HEADSTOCK, TABLE PER SPINDLE REVOLUTION).THE POWER OF VARIOUS MOVING UNITS COMES FROM SHAFT DRIVEN BY MAIN DRIVEN MOTOR. IT CAN BE TRANSMITTED THROUGH GEARS OF SPEED-CHANGE DEVICE TO SHAFT (THE FEED SAFETY MECHANISM). AFTER THAT THE MOTION WILL BE TRANSMITTED FURTHER THROUGH THE FORWARD AND REVERSE MECHANISM, TO THE FEED SHAFT, THEN TO THE LEAD-SCREW OR GEAR RACKS OF VARIOUS MOVING UNITS, ENABLE THE HEADSTOCK, CROSS & LONGITUDINAL SADDLES TO OBTAIN EACH 18 STEPS FEED RATES AT LOW AND HIGH GEAR RESPECTIVELY. THE FEED MOTION OF THE RADIAL SLIDE ON THE FACING HEAD COMES FROM HEADSTOCK, ENABLE IT TO OBTAIN VARIOUS FEED RATES. 3.3 RAPID TRANSMISSION SYSTEM THE RAPID MOVING OF THE HEADSTOCK,CROSS & LONGITUDINAL SADDLES OF THE MACHINE AND THE RAPID ROTATION OF THE ROTARY WORKTABLE ARE DRIVEN BY AC MOTOR MOUNTED AT THE RIGHT SIDE OF THE BED. POWER FROM THE MOTOR IS TRANSMITTED FROM SHAFTS COUPLING AND FRICTION CLUTCH TO EACH MOVING UNITS RESPECTIVELY, ENABLE THE SPINDLE, HEADSTOCK AND CROSS & LONGITUDINAL SADDLES TO OBTAIN THE RAPID MOVING SPEED 2500MM/MIN, THE RAPID ROTATION OF THE WORKTABLE IS 1R/MIN. 4. HYDRAULIC SYSTEM OF THE MACHINE THE HYDRAULIC SYSTEM IS LOCATED INSIDE OF LONGITUDINAL SADDLE OF THE MACHINE, WHICH IS USED FOR THE TRANSVERSE OF HEADSTOCK, LONGITUDINAL & CROSS MOVEMENT, ROTATION OF WORKTABLE, FEED SPEED CHANGE AND INTERNAL LUBRICATION OF HEADSTOCK
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land--machine in stock
-after reviewing the technical
-very good condition
-year of manufacture: 2008
-ideal for wood chips technology

technical parameters:

-main engine 37 kw
-feeding motors 1.1 kw 2.2 kw

-inlet width 370 mm
-inlet height 130 mm

-two knives
-rotor diameter 400 mm

-belt feeder
-the length of the tray 300 cm
-sieve 90 mm x 70 mm

transport dimensions:

-length 300 cm
width 150 cm
-height 170 cm
-weight of ~ 1500 kg

the price of a new r?baka net 84 400 z?

chipper skorpion 350 eb is stationary drum r?bakiem for zr?bkowania of edgings with flat surface, round logs, different kind of sawmill waste and furniture with a width of up to 350 mm.
r?baka control system provides control cabinet, that provides the functionality to enable, control, control of overload and shut down the drive. cutting system of the device is a drum with 2, 3 or 4 cutting knives. the use of screens in the design of the r?baka ensures achieving high regularity of chips. configure the appropriate amount of the blades on the drum and holes diameter applied screens allows you to obtain the chips of the required size. input material is transported to the throat r?baka by using the two gear driven feed rollers gearmotors.
wood chipper is equipped in main low-speed electric motor. this engine, unlike the high-speed is characterized by a more stable and more torque. with the same engine power reaches a greater transfer of energy and by the enlargement of the diameter of the pulley on the engine, main-belt life increases. the drive unit is electric motor with power 37 kw.
wood chipper is equipped with an electronic control system that automatically prevents overloading the cutting layout, by temporarily stopping the feeder.
skorpion 350 eb can collaborate both with tape, as well as vibratory loading systems-transport. a basic set of devices is a wood chipper, control cabinet and optional loading transporter and transporter.
the resulting chip can be used for direct combustion in furnaces or as raw material for paper production, furniture boards, and after secondary shredding by cutting mill for the production of briquettes and pellets.
 -MACHINE IN STOCK -AFTER REVIEWING THE TECHNICAL -VERY GOOD CONDITION -YEAR OF MANUFACTURE: 2008 -IDEAL FOR WOOD CHIPS TECHNOLOGY TECHNICAL PARAMETERS: -MAIN ENGINE 37 KW -FEEDING MOTORS 1.1 KW 2.2 KW -INLET WIDTH 370 MM -INLET HEIGHT 130 MM -TWO KNIVES -ROTOR DIAMETER 400 MM -BELT FEEDER -THE LENGTH OF THE TRAY 300 CM -SIEVE 90 MM X 70 MM TRANSPORT DIMENSIONS: -LENGTH 300 CM WIDTH 150 CM -HEIGHT 170 CM -WEIGHT OF ~ 1500 KG THE PRICE OF A NEW R?BAKA NET 84 400 Z? CHIPPER SKORPION 350 EB IS STATIONARY DRUM R?BAKIEM FOR ZR?BKOWANIA OF EDGINGS WITH FLAT SURFACE, ROUND LOGS, DIFFERENT KIND OF SAWMILL WASTE AND FURNITURE WITH A WIDTH OF UP TO 350 MM. R?BAKA CONTROL SYSTEM PROVIDES CONTROL CABINET, THAT PROVIDES THE FUNCTIONALITY TO ENABLE, CONTROL, CONTROL OF OVERLOAD AND SHUT DOWN THE DRIVE. CUTTING SYSTEM OF THE DEVICE IS A DRUM WITH 2, 3 OR 4 CUTTING KNIVES. THE USE OF SCREENS IN THE DESIGN OF THE R?BAKA ENSURES ACHIEVING HIGH REGULARITY OF CHIPS. CONFIGURE THE APPROPRIATE AMOUNT OF THE BLADES ON THE DRUM AND HOLES DIAMETER APPLIED SCREENS ALLOWS YOU TO OBTAIN THE CHIPS OF THE REQUIRED SIZE. INPUT MATERIAL IS TRANSPORTED TO THE THROAT R?BAKA BY USING THE TWO GEAR DRIVEN FEED ROLLERS GEARMOTORS. WOOD CHIPPER IS EQUIPPED IN MAIN LOW-SPEED ELECTRIC MOTOR. THIS ENGINE, UNLIKE THE HIGH-SPEED IS CHARACTERIZED BY A MORE STABLE AND MORE TORQUE. WITH THE SAME ENGINE POWER REACHES A GREATER TRANSFER OF ENERGY AND BY THE ENLARGEMENT OF THE DIAMETER OF THE PULLEY ON THE ENGINE, MAIN-BELT LIFE INCREASES. THE DRIVE UNIT IS ELECTRIC MOTOR WITH POWER 37 KW. WOOD CHIPPER IS EQUIPPED WITH AN ELECTRONIC CONTROL SYSTEM THAT AUTOMATICALLY PREVENTS OVERLOADING THE CUTTING LAYOUT, BY TEMPORARILY STOPPING THE FEEDER. SKORPION 350 EB CAN COLLABORATE BOTH WITH TAPE, AS WELL AS VIBRATORY LOADING SYSTEMS-TRANSPORT. A BASIC SET OF DEVICES IS A WOOD CHIPPER, CONTROL CABINET AND OPTIONAL LOADING TRANSPORTER AND TRANSPORTER. THE RESULTING CHIP CAN BE USED FOR DIRECT COMBUSTION IN FURNACES OR AS RAW MATERIAL FOR PAPER PRODUCTION, FURNITURE BOARDS, AND AFTER SECONDARY SHREDDING BY CUTTING MILL FOR THE PRODUCTION OF BRIQUETTES AND PELLETS.
Vendedor: StanDrew
Año de construcción: usado
Ubicación: Land-spindle diameter:110 mm<br/>x-travel:900 mm<br/>y-travel:900 mm<br/>z-axis:1400 mm<br/>w-axis:600 mm<br/>spindle nose:50 iso<br/>turning speeds steps:22 stufen<br/>turning speed range:8-1000 u/min<br/>radial face slide travel:180 mm<br/>table surface area:1100x960 mm<br/>max. table load:2500 kg<br/>dimensions of the machine ca.:4910x2454x2750 mm<br/>total power requirement:7,5 kw<br/>weight of the machine ca.:13 t<br/>dro: <br/>hydr. clamping of the axes: <br/>hydr. table clamping: <br/>ce and declaration of conformity: <br/>4 jaw chuck: <br/>halogen lamp: <br/>rear column: <br/>: <br/>: <br/>metric, 400v 50hz 3 phase: <br/><br/>unused table boring machine, make smtcl, type tpx 6111b  main features: powerful, flexible and productive with an optimal price / performance ratio  short and sweet ücompact, rigid cast-iron construction ü sturdy four-pointed guides, which are hardened and precision ground, guarantee accurate working for many years ümechanical functions, which can not be operated simultaneously, are locked against each other üx, y-axis has a dro display with memory function üspindle with tool holder iso50 and automatic clamping system üspindelstock and feed gear are equipped with an overload clutch üthe machine is equipped with a thread cutting device üplan disk and drilling spindle have the different functions different speed ranges which are dependent on their tasks ütable rotatable over 360 ° (optional with display of the degree setting) ütelescopic steel covers protect the guides against chips and soiling üwith variable speed drive and 3-axis servo motor üweight compensation for headstock ühighest workpiece weight from 2000 to 6000kg üspindle displacement in high-precision bearings without clearance ücoating spindle from 90 mm - 130 mm diameter - extendable 600 - 900 mm (w-axis) üautomatic tool clamping üautomatic lubrication of the guideways    further technical data and accessories, according to the appendix.   benefit from the favorable leasing and hire-purchase conditions of abc leasing. ask us about it. of course, you also receive from us free delivery, assembly / commissioning and ready-to-hand transfer as well as control training. SPINDLE DIAMETER:110 MM
X-TRAVEL:900 MM
Y-TRAVEL:900 MM
Z-AXIS:1400 MM
W-AXIS:600 MM
SPINDLE NOSE:50 ISO
TURNING SPEEDS STEPS:22 STUFEN
TURNING SPEED RANGE:8-1000 U/MIN
RADIAL FACE SLIDE TRAVEL:180 MM
TABLE SURFACE AREA:1100X960 MM
MAX. TABLE LOAD:2500 KG
DIMENSIONS OF THE MACHINE CA.:4910X2454X2750 MM
TOTAL POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:13 T
DRO:
HYDR. CLAMPING OF THE AXES:
HYDR. TABLE CLAMPING:
CE AND DECLARATION OF CONFORMITY:
4 JAW CHUCK:
HALOGEN LAMP:
REAR COLUMN:
:
:
METRIC, 400V 50HZ 3 PHASE:

UNUSED TABLE BORING MACHINE, MAKE SMTCL, TYPE TPX 6111B MAIN FEATURES: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO SHORT AND SWEET üCOMPACT, RIGID CAST-IRON CONSTRUCTION ü STURDY FOUR-POINTED GUIDES, WHICH ARE HARDENED AND PRECISION GROUND, GUARANTEE ACCURATE WORKING FOR MANY YEARS üMECHANICAL FUNCTIONS, WHICH CAN NOT BE OPERATED SIMULTANEOUSLY, ARE LOCKED AGAINST EACH OTHER üX, Y-AXIS HAS A DRO DISPLAY WITH MEMORY FUNCTION üSPINDLE WITH TOOL HOLDER ISO50 AND AUTOMATIC CLAMPING SYSTEM üSPINDELSTOCK AND FEED GEAR ARE EQUIPPED WITH AN OVERLOAD CLUTCH üTHE MACHINE IS EQUIPPED WITH A THREAD CUTTING DEVICE üPLAN DISK AND DRILLING SPINDLE HAVE THE DIFFERENT FUNCTIONS DIFFERENT SPEED RANGES WHICH ARE DEPENDENT ON THEIR TASKS üTABLE ROTATABLE OVER 360 ° (OPTIONAL WITH DISPLAY OF THE DEGREE SETTING) üTELESCOPIC STEEL COVERS PROTECT THE GUIDES AGAINST CHIPS AND SOILING üWITH VARIABLE SPEED DRIVE AND 3-AXIS SERVO MOTOR üWEIGHT COMPENSATION FOR HEADSTOCK üHIGHEST WORKPIECE WEIGHT FROM 2000 TO 6000KG üSPINDLE DISPLACEMENT IN HIGH-PRECISION BEARINGS WITHOUT CLEARANCE üCOATING SPINDLE FROM 90 MM - 130 MM DIAMETER - EXTENDABLE 600 - 900 MM (W-AXIS) üAUTOMATIC TOOL CLAMPING üAUTOMATIC LUBRICATION OF THE GUIDEWAYS FURTHER TECHNICAL DATA AND ACCESSORIES, ACCORDING TO THE APPENDIX. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING. ASK US ABOUT IT. OF COURSE, YOU ALSO RECEIVE FROM US FREE DELIVERY, ASSEMBLY / COMMISSIONING AND READY-TO-HAND TRANSFER AS WELL AS CONTROL TRAINING.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-eccentric press pe 160 with servo roll feed servo 400 and reel - straightening machine nominal preã? force 1,600 kn
piston stroke, in steps adjustable 20-160 mm
tappet adjustment 100 mm
throat depth 400 mm
speed 50 rpm idle
option: adjustable 30...85/min
mould installation height at grã¶ã?thub
down and adjustment up 460 mm
(applies from top machine table bottom plunger)
table clamping area (wxd) 1.300 x 780 mm
plunger clamping area (wxd) 900 x 600 mm
pin hole in the tappet 65 mm
power of main motor 15 kw
height approx. 3,600 mm the machine
weight of machine 14,000 kg - continuous hubzahlregeleung, fully automatic stroke adjustment, motorized ram adjustment, hydr. overload, s7 siemens plc.
electron. camshaft gear

main specifications of the servo - 400
belt width of 400 mm
belt thickness of 4.5 mm
cross section of max. 1,200 mm â²
accuracy + / - 0.05 mm
roll diameter 80 mm

reel - dir. - combination
reel: 2000 kg, pneumatic pressure arm
leveler: all roller drive frequency controlled
9 setting rollers, 2 feed rollers
band width of 360 mm, strip thickness: 0.3-3.5 mm; diameter: 900 mmâ²
alligator hole

ECCENTRIC PRESS PE 160 WITH SERVO ROLL FEED SERVO 400 AND REEL - STRAIGHTENING MACHINE NOMINAL PRE&ATILDE;? FORCE 1,600 KN PISTON STROKE, IN STEPS ADJUSTABLE 20-160 MM TAPPET ADJUSTMENT 100 MM THROAT DEPTH 400 MM SPEED 50 RPM IDLE OPTION: ADJUSTABLE 30...85/MIN MOULD INSTALLATION HEIGHT AT GR&ATILDE;&PARA;&ATILDE;?THUB DOWN AND ADJUSTMENT UP 460 MM (APPLIES FROM TOP MACHINE TABLE BOTTOM PLUNGER) TABLE CLAMPING AREA (WXD) 1.300 X 780 MM PLUNGER CLAMPING AREA (WXD) 900 X 600 MM PIN HOLE IN THE TAPPET 65 MM POWER OF MAIN MOTOR 15 KW HEIGHT APPROX. 3,600 MM THE MACHINE WEIGHT OF MACHINE 14,000 KG - CONTINUOUS HUBZAHLREGELEUNG, FULLY AUTOMATIC STROKE ADJUSTMENT, MOTORIZED RAM ADJUSTMENT, HYDR. OVERLOAD, S7 SIEMENS PLC. ELECTRON. CAMSHAFT GEAR MAIN SPECIFICATIONS OF THE SERVO - 400 BELT WIDTH OF 400 MM BELT THICKNESS OF 4.5 MM CROSS SECTION OF MAX. 1,200 MM &ACIRC;&SUP2; ACCURACY + / - 0.05 MM ROLL DIAMETER 80 MM REEL - DIR. - COMBINATION REEL: 2000 KG, PNEUMATIC PRESSURE ARM LEVELER: ALL ROLLER DRIVE FREQUENCY CONTROLLED 9 SETTING ROLLERS, 2 FEED ROLLERS BAND WIDTH OF 360 MM, STRIP THICKNESS: 0.3-3.5 MM; DIAMETER: 900 MM&ACIRC;&SUP2; ALLIGATOR HOLE
Vendedor: Wimmer- Umformtechnik GmbH
Año de construcción: usado
Ubicación: scales:heidenhain
round table c-axis:dr630 mit encoder
spindle air purge:

standard accessories: 1. spindle cooler 2. spindle air blast 3. cutting coolant system 4. auto lubrication system 5. rigid tapping 6. air condition for electric cabinet 7. program end alarm light 8. usb/rs232 interface 9. oil skimmer 10. air/water cleaning equipment 11.dual screw type chip remover 12.steel-belt type chip conveyor with cart 13. operator\'s manual 14. working lamp 15. tool kit 16. x, y, z axis linear guideways(x,y axis ball,z axis roller) 17. x, y, z axis ballscrew(x.y axis ?63-p20,z axis ?50-p10) 18. semi enclosure splash guard(no roof) 19. foot switch for tool released 20. x axis telescopic cover+y axis javara cover 21. hanging type monitor+mpg 22. base leveling screw & foundation j-bolts 23.tramec a5tk speed max. 18.000 rpm power s1 28 kw constant from 3.000 rpm torque s1 90nm up to 3000rpm 24.electric box&operator door interlock 25.deeper chip conveyor 26.machine color:casting ral-5008,cover ral-7035 .gif" alt="Land-x-travel:2200 mm
y-travel:1300+650 mm
z-travel:800 mm
dimensions of the machine ca.:6,6 x 3,4 x 4 m
table-size:2000 x 1200 mm
distance between columns:1400 (ohne spritzschutz) mm
rapid feed in axis-x,y,z:25/ 25/ 25 m/min.
spindle nose:hsk-a63
spindle speed:18000 1/min
spindle drive:28kw(s1),90nm(s1)
tool changer:24 fach
table load:10 t
machine size (lxwxh):6.4m/ 4.6m/ 5.0m mm
rotary table diameter:630 mm
spindle coolant system:
cooling system:
automatic lubrication system:
rigid tapping:
air conditioner for cabinet:
chip conveyor - auger:
chip conveyor with chip bucket:
ethernet interface:
:
signal lamp:
halogen lamp:
telescope cover for guideways:
machine semi-cover:
ce-design:
milling head:tramec a5tk
tool setter:optional verfügbar
workpiece measurement:heidenhain ts640+se660
cnc controller:heidenhain tnc 640+19\"lcd
scales:heidenhain
round table c-axis:dr630 mit encoder
spindle air purge:

standard accessories: 1. spindle cooler 2. spindle air blast 3. cutting coolant system 4. auto lubrication system 5. rigid tapping 6. air condition for electric cabinet 7. program end alarm light 8. usb/rs232 interface 9. oil skimmer 10. air/water cleaning equipment 11.dual screw type chip remover 12.steel-belt type chip conveyor with cart 13. operator\'s manual 14. working lamp 15. tool kit 16. x, y, z axis linear guideways(x,y axis ball,z axis roller) 17. x, y, z axis ballscrew(x.y axis ?63-p20,z axis ?50-p10) 18. semi enclosure splash guard(no roof) 19. foot switch for tool released 20. x axis telescopic cover+y axis javara cover 21. hanging type monitor+mpg 22. base leveling screw & foundation j-bolts 23.tramec a5tk speed max. 18.000 rpm power s1 28 kw constant from 3.000 rpm torque s1 90nm up to 3000rpm 24.electric box&operator door interlock 25.deeper chip conveyor 26.machine color:casting ral-5008,cover ral-7035 " style="height: 18px;"> X-TRAVEL:2200 MM
Y-TRAVEL:1300+650 MM
Z-TRAVEL:800 MM
DIMENSIONS OF THE MACHINE CA.:6,6 X 3,4 X 4 M
TABLE-SIZE:2000 X 1200 MM
DISTANCE BETWEEN COLUMNS:1400 (OHNE SPRITZSCHUTZ) MM
RAPID FEED IN AXIS-X,Y,Z:25/ 25/ 25 M/MIN.
SPINDLE NOSE:HSK-A63
SPINDLE SPEED:18000 1/MIN
SPINDLE DRIVE:28KW(S1),90NM(S1)
TOOL CHANGER:24 FACH
TABLE LOAD:10 T
MACHINE SIZE (LXWXH):6.4M/ 4.6M/ 5.0M MM
ROTARY TABLE DIAMETER:630 MM
SPINDLE COOLANT SYSTEM:
COOLING SYSTEM:
AUTOMATIC LUBRICATION SYSTEM:
RIGID TAPPING:
AIR CONDITIONER FOR CABINET:
CHIP CONVEYOR - AUGER:
CHIP CONVEYOR WITH CHIP BUCKET:
ETHERNET INTERFACE:
:
SIGNAL LAMP:
HALOGEN LAMP:
TELESCOPE COVER FOR GUIDEWAYS:
MACHINE SEMI-COVER:
CE-DESIGN:
MILLING HEAD:TRAMEC A5TK
TOOL SETTER:OPTIONAL VERFüGBAR
WORKPIECE MEASUREMENT:HEIDENHAIN TS640+SE660
CNC CONTROLLER:HEIDENHAIN TNC 640+19\"LCD
SCALES:HEIDENHAIN
ROUND TABLE C-AXIS:DR630 MIT ENCODER
SPINDLE AIR PURGE:

STANDARD ACCESSORIES: 1. SPINDLE COOLER 2. SPINDLE AIR BLAST 3. CUTTING COOLANT SYSTEM 4. AUTO LUBRICATION SYSTEM 5. RIGID TAPPING 6. AIR CONDITION FOR ELECTRIC CABINET 7. PROGRAM END ALARM LIGHT 8. USB/RS232 INTERFACE 9. OIL SKIMMER 10. AIR/WATER CLEANING EQUIPMENT 11.DUAL SCREW TYPE CHIP REMOVER 12.STEEL-BELT TYPE CHIP CONVEYOR WITH CART 13. OPERATOR\'S MANUAL 14. WORKING LAMP 15. TOOL KIT 16. X, Y, Z AXIS LINEAR GUIDEWAYS(X,Y AXIS BALL,Z AXIS ROLLER) 17. X, Y, Z AXIS BALLSCREW(X.Y AXIS ?63-P20,Z AXIS ?50-P10) 18. SEMI ENCLOSURE SPLASH GUARD(NO ROOF) 19. FOOT SWITCH FOR TOOL RELEASED 20. X AXIS TELESCOPIC COVER+Y AXIS JAVARA COVER 21. HANGING TYPE MONITOR+MPG 22. BASE LEVELING SCREW & FOUNDATION J-BOLTS 23.TRAMEC A5TK SPEED MAX. 18.000 RPM POWER S1 28 KW CONSTANT FROM 3.000 RPM TORQUE S1 90NM UP TO 3000RPM 24.ELECTRIC BOX&OPERATOR DOOR INTERLOCK 25.DEEPER CHIP CONVEYOR 26.MACHINE COLOR:CASTING RAL-5008,COVER RAL-7035
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-pressure boiling pans by erlo in good condition.
completely made of stainless steel, has yet to function be checked, content about 280l.

dimensions: 1400x850x950mm
internal dimensions: 1030x550x510mm

the mismatch? 
we resolve our camp and have very many, cheap deals for devices from the fields of gastro, restaurant and canteen kitchens, just make a request. PRESSURE BOILING PANS BY ERLO IN GOOD CONDITION. COMPLETELY MADE OF STAINLESS STEEL, HAS YET TO FUNCTION BE CHECKED, CONTENT ABOUT 280L. DIMENSIONS: 1400X850X950MM INTERNAL DIMENSIONS: 1030X550X510MM THE MISMATCH? WE RESOLVE OUR CAMP AND HAVE VERY MANY, CHEAP DEALS FOR DEVICES FROM THE FIELDS OF GASTRO, RESTAURANT AND CANTEEN KITCHENS, JUST MAKE A REQUEST.
Vendedor: Dipl.-Ing. O. Saad
Año de construcción: usado
Ubicación: Land-:vl 1300 | vl 1500 <br/>x-travel:1.300|1.500 mm<br/>y-travel:760 mm<br/>z-travel:700 mm<br/>table-size:1.600x750 mm<br/>max. table load:1.200 kg<br/>distance spindle center to column:780 mm<br/>distance spindle center to table:135-835 mm<br/>rapid traverse in x-y-z axis:24/24/24 m<br/>milling feed range:1-10.000 mm/min<br/>:10.000 (6000 bei sk 50)  1/min<br/>spindle drive:15/18.5 kw<br/>positioning accuracy:+/- 0,012 mm<br/>repeating accuracy:+/- 0,010 mm<br/>tool taper:sk/bt 40, sk/bt50 <br/>max. tool weight:8/15 kg<br/>tool length:350 mm<br/>tool diameter:Ø110/Ø200 (angrenzend leer) mm<br/>dimensions:4.015 x 3.605 x 3.550  mm<br/>weight of the machine ca.:12 t<br/>cnc control siemens 828d: <br/>complete cooling system: <br/>24 station arm type tool magazine and 24 sets pull: <br/>machine work light: <br/>rigid tapping: <br/>chip conveyor with chip bucket: <br/>water gun: <br/>: <br/>heat exchanger: <br/>automatic lubrication system: <br/>ce-design: <br/>technical documentation in german language: <br/>signal lamp: <br/>pneumatic unit: <br/>spindle oil cooler: <br/>cutting air blast: <br/>automatically power off: <br/>mpg hand wheel: <br/>linear scales: <br/>cnc controls from:siemens/fanuc/heidenhain <br/>tool measuring system:blum <br/>workpiece measurement system:blum <br/>cnc-rotary table: <br/>4th5th axis: <br/><br/>brand-new cnc vertical machining center with cnc control siemens 828d with shopmill.  incl. the following standard accessories:  cnc control siemens 828d with shopmill including 2-year warranty 1 piece coolant system 1 piece automatic 20-fold tool changer (model vl-700), type ?arm type atc? 1 piece automatic 24-fold tool changer (model vl-900, vl-1100, vb-1000, vb-1200, vb-1600), type ?arm type atc? 1 piece halogen machine lamp 1 piece alarm / indicator lamp rigid tapping 1 set of tools 1 piece chip conveyor (chain) 1 piece tool set (water gun, air gun) 1 set foundation blocks and fixture screws heat exchanger for electric cabinet automatic lubrication system full enclosure guard automatic power off spindle speed of 8000 u / min (model vl-700, vl-900, vl-1100, vb-1000) spindle speed of 6000 u / min (model vb-1200, vb-1600) linear guide (vl-serie) from thk or rexroth 1 set of operating manual with spare parts list in german language 400v, 50cps, 3 phs ce version incl. ce declaration of conformity belt drive with 10.000 u/min door interlock 8,4? screen spindle chiller coolant through spindle center tool setter (blum)  warranty: 12 months  more information can be found in the appendix. :VL 1300 | VL 1500
X-TRAVEL:1.300|1.500 MM
Y-TRAVEL:760 MM
Z-TRAVEL:700 MM
TABLE-SIZE:1.600X750 MM
MAX. TABLE LOAD:1.200 KG
DISTANCE SPINDLE CENTER TO COLUMN:780 MM
DISTANCE SPINDLE CENTER TO TABLE:135-835 MM
RAPID TRAVERSE IN X-Y-Z AXIS:24/24/24 M
MILLING FEED RANGE:1-10.000 MM/MIN
:10.000 (6000 BEI SK 50) 1/MIN
SPINDLE DRIVE:15/18.5 KW
POSITIONING ACCURACY:+/- 0,012 MM
REPEATING ACCURACY:+/- 0,010 MM
TOOL TAPER:SK/BT 40, SK/BT50
MAX. TOOL WEIGHT:8/15 KG
TOOL LENGTH:350 MM
TOOL DIAMETER:Ø110/Ø200 (ANGRENZEND LEER) MM
DIMENSIONS:4.015 X 3.605 X 3.550 MM
WEIGHT OF THE MACHINE CA.:12 T
CNC CONTROL SIEMENS 828D:
COMPLETE COOLING SYSTEM:
24 STATION ARM TYPE TOOL MAGAZINE AND 24 SETS PULL:
MACHINE WORK LIGHT:
RIGID TAPPING:
CHIP CONVEYOR WITH CHIP BUCKET:
WATER GUN:
:
HEAT EXCHANGER:
AUTOMATIC LUBRICATION SYSTEM:
CE-DESIGN:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
SIGNAL LAMP:
PNEUMATIC UNIT:
SPINDLE OIL COOLER:
CUTTING AIR BLAST:
AUTOMATICALLY POWER OFF:
MPG HAND WHEEL:
LINEAR SCALES:
CNC CONTROLS FROM:SIEMENS/FANUC/HEIDENHAIN
TOOL MEASURING SYSTEM:BLUM
WORKPIECE MEASUREMENT SYSTEM:BLUM
CNC-ROTARY TABLE:
4TH5TH AXIS:

BRAND-NEW CNC VERTICAL MACHINING CENTER WITH CNC CONTROL SIEMENS 828D WITH SHOPMILL. INCL. THE FOLLOWING STANDARD ACCESSORIES: CNC CONTROL SIEMENS 828D WITH SHOPMILL INCLUDING 2-YEAR WARRANTY 1 PIECE COOLANT SYSTEM 1 PIECE AUTOMATIC 20-FOLD TOOL CHANGER (MODEL VL-700), TYPE ?ARM TYPE ATC? 1 PIECE AUTOMATIC 24-FOLD TOOL CHANGER (MODEL VL-900, VL-1100, VB-1000, VB-1200, VB-1600), TYPE ?ARM TYPE ATC? 1 PIECE HALOGEN MACHINE LAMP 1 PIECE ALARM / INDICATOR LAMP RIGID TAPPING 1 SET OF TOOLS 1 PIECE CHIP CONVEYOR (CHAIN) 1 PIECE TOOL SET (WATER GUN, AIR GUN) 1 SET FOUNDATION BLOCKS AND FIXTURE SCREWS HEAT EXCHANGER FOR ELECTRIC CABINET AUTOMATIC LUBRICATION SYSTEM FULL ENCLOSURE GUARD AUTOMATIC POWER OFF SPINDLE SPEED OF 8000 U / MIN (MODEL VL-700, VL-900, VL-1100, VB-1000) SPINDLE SPEED OF 6000 U / MIN (MODEL VB-1200, VB-1600) LINEAR GUIDE (VL-SERIE) FROM THK OR REXROTH 1 SET OF OPERATING MANUAL WITH SPARE PARTS LIST IN GERMAN LANGUAGE 400V, 50CPS, 3 PHS CE VERSION INCL. CE DECLARATION OF CONFORMITY BELT DRIVE WITH 10.000 U/MIN DOOR INTERLOCK 8,4? SCREEN SPINDLE CHILLER COOLANT THROUGH SPINDLE CENTER TOOL SETTER (BLUM) WARRANTY: 12 MONTHS MORE INFORMATION CAN BE FOUND IN THE APPENDIX.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-francis shaw ko intermix  
year: jan 1987
approx. mixing capacity 1.8 litres
mawdsley dc motor, shunt wound, serial no. 180t827, 30kw, 460 volts, 74 amps, 1800rpm, continuous rating
apex denison hydraulic pump
holroyd gearbox
barco rotary joints
fortress interlock system
water steam inlet
water steam drain
mixing chamber 
rotors
plunger
drop door
grease points
with hopper
thorn emi electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, november 1987
operator panel consisting of rotor speed, main motor current process timer, mix temperature
complete with control panel FRANCIS SHAW KO INTERMIX YEAR: JAN 1987 APPROX. MIXING CAPACITY 1.8 LITRES MAWDSLEY DC MOTOR, SHUNT WOUND, SERIAL NO. 180T827, 30KW, 460 VOLTS, 74 AMPS, 1800RPM, CONTINUOUS RATING APEX DENISON HYDRAULIC PUMP HOLROYD GEARBOX BARCO ROTARY JOINTS FORTRESS INTERLOCK SYSTEM WATER STEAM INLET WATER STEAM DRAIN MIXING CHAMBER ROTORS PLUNGER DROP DOOR GREASE POINTS WITH HOPPER THORN EMI ELECTRONIC STAR DRIVE; 415 VOLTS, 3 WIRE, 50 CYCLES, 54KVA, NOVEMBER 1987 OPERATOR PANEL CONSISTING OF ROTOR SPEED, MAIN MOTOR CURRENT PROCESS TIMER, MIX TEMPERATURE COMPLETE WITH CONTROL PANEL
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Precio: 59.600 €
Ubicación: Land-: 130 to<br/>: 1.000 x 640 mm<br/>: 5 - 110 mm<br/>: 11 kw<br/>: x. 400 ma mm<br/>: 65 mm<br/>: 330 mm<br/>: 630 x 400 mm<br/>: 210 mm<br/>: 2.200 mm<br/>: 1.200 mm<br/>: 2.525 mm<br/>: 8.200 kg<br/>8-fold ram guide <br/>light guard<br/>manual ram adjustment<br/>mechanical overload safety device <br/>automatic lubrication <br/>machine and equipment in conformity with ce-regulations as well as the austrian and german <br/>accident prevention regulations <br/>user manual in german and english<br/><br/>option:<br/>bolster plate  euro  4.650,--<br/><br/>we have more than 75 references!<br/><br/>(sample photo shows mod. cdcs 1600 p81)<br/><br/>pressforce: 130 to<br/>table: 1.000 x 640 mm<br/>clutch: disc<br/>activation of clutch: pneumatic<br/>stroke: 5 - 110 mm<br/>number of strokes: 60  1/min<br/>motor: 11 kw<br/>dist. betw. table and ram max.: 400 mm<br/>hole in ram: 65 mm<br/>throat depth: 330 mm<br/>ram surface: 630 x 400 mm<br/>hole in table: 210 mm<br/>length: 2.200 mm<br/>width: 1.200 mm<br/>height: 2.525 mm<br/>weight: 8.200 kg<br/><br/><br/><br/> : 130 TO
: 1.000 X 640 MM
: 5 - 110 MM
: 11 KW
: X. 400 MA MM
: 65 MM
: 330 MM
: 630 X 400 MM
: 210 MM
: 2.200 MM
: 1.200 MM
: 2.525 MM
: 8.200 KG
8-FOLD RAM GUIDE
LIGHT GUARD
MANUAL RAM ADJUSTMENT
MECHANICAL OVERLOAD SAFETY DEVICE
AUTOMATIC LUBRICATION
MACHINE AND EQUIPMENT IN CONFORMITY WITH CE-REGULATIONS AS WELL AS THE AUSTRIAN AND GERMAN
ACCIDENT PREVENTION REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

OPTION:
BOLSTER PLATE  EURO  4.650,--

WE HAVE MORE THAN 75 REFERENCES!

(SAMPLE PHOTO SHOWS MOD. CDCS 1600 P81)

PRESSFORCE: 130 TO
TABLE: 1.000 X 640 MM
CLUTCH: DISC
ACTIVATION OF CLUTCH: PNEUMATIC
STROKE: 5 - 110 MM
NUMBER OF STROKES: 60 1/MIN
MOTOR: 11 KW
DIST. BETW. TABLE AND RAM MAX.: 400 MM
HOLE IN RAM: 65 MM
THROAT DEPTH: 330 MM
RAM SURFACE: 630 X 400 MM
HOLE IN TABLE: 210 MM
LENGTH: 2.200 MM
WIDTH: 1.200 MM
HEIGHT: 2.525 MM
WEIGHT: 8.200 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-capacity		: 	250	ton
table dimensions	: 	1.250 x 800	mm
ram dimensions	: 	900 x 670	mm
shut height max.	: 	660	mm
throat depth	: 	450	mm
clearance hole in the table	: 	400 x 360	mm
clearance hole in the spanning plate	: 	210	mm
stroke		: 	40 - 160	mm
ram adjustment	: 	110	mm
distance between the columns	: 	490	mm
strokes an minute in passage unloaded	: 	50	min-¹
motorpower	: 	22,0	kw
connection power	: 	23,5	kw
dimensions of the machine wxdxh	: 	1,5 x 2,9 x 3,6	m
weight of the machine ca.	: 	18.000	kg
operation	: 2-hand / foot		
the machine is equipped with;
-	safety overload protection system
-	automatic central lubrication
-	balance cylinders on the ram
-	additional spanning plate on the table
 CAPACITY : 250 TON TABLE DIMENSIONS : 1.250 X 800 MM RAM DIMENSIONS : 900 X 670 MM SHUT HEIGHT MAX. : 660 MM THROAT DEPTH : 450 MM CLEARANCE HOLE IN THE TABLE : 400 X 360 MM CLEARANCE HOLE IN THE SPANNING PLATE : 210 MM STROKE : 40 - 160 MM RAM ADJUSTMENT : 110 MM DISTANCE BETWEEN THE COLUMNS : 490 MM STROKES AN MINUTE IN PASSAGE UNLOADED : 50 MIN-¹ MOTORPOWER : 22,0 KW CONNECTION POWER : 23,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,5 X 2,9 X 3,6 M WEIGHT OF THE MACHINE CA. : 18.000 KG OPERATION : 2-HAND / FOOT THE MACHINE IS EQUIPPED WITH; - SAFETY OVERLOAD PROTECTION SYSTEM - AUTOMATIC CENTRAL LUBRICATION - BALANCE CYLINDERS ON THE RAM - ADDITIONAL SPANNING PLATE ON THE TABLE
Vendedor: Voortman Machines
Año de construcción: usado
Precio: 51.000 €
Ubicación: Land-: 110 to<br/>: 900 x 540 mm<br/>: 14 - 114 mm<br/>: 7,5 kw<br/>: 385 mm<br/>: 50 mm<br/>: 280 mm<br/>: 90 mm<br/>: 490 x 325 mm<br/>: 1.700 mm<br/>: 1.100 mm<br/>: 2.400 mm<br/>: 5.600 kg<br/>8-fold ram guide <br/>front protection by light guard<br/>manual ram adjustment<br/>mech. overload safety device <br/>automatic lubrication <br/>machine and equipment in conformity with ce-regulations as well as the austrian and german <br/>accident prevention regulations <br/>user manual in german and english<br/><br/>option:<br/>bolster plate  euro 3.580,--<br/><br/>we have more than 75 references!<br/><br/>pressforce: 110 to<br/>table: 900 x 540 mm<br/>clutch: disc<br/>activation of clutch: pneumatic<br/>stroke: 14 - 114 mm<br/>number of strokes: 60 h/min<br/>motor: 7,5 kw<br/>max. die height: 385 mm<br/>die hole diam.: 50 mm<br/>throat depth: 280 mm<br/>ram adjustment: 90 mm<br/>ram dimensions: 490 x 325 mm<br/>length: 1.700 mm<br/>width: 1.100 mm<br/>height: 2.400 mm<br/>weight: 5.600 kg<br/><br/><br/><br/> : 110 TO
: 900 X 540 MM
: 14 - 114 MM
: 7,5 KW
: 385 MM
: 50 MM
: 280 MM
: 90 MM
: 490 X 325 MM
: 1.700 MM
: 1.100 MM
: 2.400 MM
: 5.600 KG
8-FOLD RAM GUIDE
FRONT PROTECTION BY LIGHT GUARD
MANUAL RAM ADJUSTMENT
MECH. OVERLOAD SAFETY DEVICE
AUTOMATIC LUBRICATION
MACHINE AND EQUIPMENT IN CONFORMITY WITH CE-REGULATIONS AS WELL AS THE AUSTRIAN AND GERMAN
ACCIDENT PREVENTION REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

OPTION:
BOLSTER PLATE  EURO 3.580,--

WE HAVE MORE THAN 75 REFERENCES!

PRESSFORCE: 110 TO
TABLE: 900 X 540 MM
CLUTCH: DISC
ACTIVATION OF CLUTCH: PNEUMATIC
STROKE: 14 - 114 MM
NUMBER OF STROKES: 60 H/MIN
MOTOR: 7,5 KW
MAX. DIE HEIGHT: 385 MM
DIE HOLE DIAM.: 50 MM
THROAT DEPTH: 280 MM
RAM ADJUSTMENT: 90 MM
RAM DIMENSIONS: 490 X 325 MM
LENGTH: 1.700 MM
WIDTH: 1.100 MM
HEIGHT: 2.400 MM
WEIGHT: 5.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-capacity		: 	250	ton
table dimensions	: 	1.250 x 800	mm
ram dimensions	: 	900 x 670	mm
dimensions spanning plate	: 	1.600 x 810 x 100	mm
shut height max.	: 	660	mm
throat depth	: 	460	mm
clearance hole in the table	: 	400 x 360	mm
clearance hole in the spanning plate	: 	210	mm
stroke		: 	40 - 160	mm
ram adjustment	: 	110	mm
distance between the columns	: 	490	mm
strokes an minute in passage unloaded	: 	50	min-¹
motor power	: 	22,0	kw
connection power	: 	23,5	kw
dimensions of the machine wxdxh	: 	1,5 x 2,9 x 3,6	m
weight of the machine ca.	: 	17.000	kg
operation	: 2-hand / foot		
the machine is equipped with;
-	safety overload protection system
-	automatic central lubrication
-	balance cylinders on the ram
-	additional spanning plate on the table
 CAPACITY : 250 TON TABLE DIMENSIONS : 1.250 X 800 MM RAM DIMENSIONS : 900 X 670 MM DIMENSIONS SPANNING PLATE : 1.600 X 810 X 100 MM SHUT HEIGHT MAX. : 660 MM THROAT DEPTH : 460 MM CLEARANCE HOLE IN THE TABLE : 400 X 360 MM CLEARANCE HOLE IN THE SPANNING PLATE : 210 MM STROKE : 40 - 160 MM RAM ADJUSTMENT : 110 MM DISTANCE BETWEEN THE COLUMNS : 490 MM STROKES AN MINUTE IN PASSAGE UNLOADED : 50 MIN-¹ MOTOR POWER : 22,0 KW CONNECTION POWER : 23,5 KW DIMENSIONS OF THE MACHINE WXDXH : 1,5 X 2,9 X 3,6 M WEIGHT OF THE MACHINE CA. : 17.000 KG OPERATION : 2-HAND / FOOT THE MACHINE IS EQUIPPED WITH; - SAFETY OVERLOAD PROTECTION SYSTEM - AUTOMATIC CENTRAL LUBRICATION - BALANCE CYLINDERS ON THE RAM - ADDITIONAL SPANNING PLATE ON THE TABLE
Vendedor: Voortman Machines
Año de construcción: usado
Precio: 39.200 €
Ubicación: Land-: 63 to<br/>: 750 x 500 mm<br/>: 4 - 102 mm<br/>: 7,5 kw<br/>: x. 350 ma mm<br/>: 50 mm<br/>: 270 mm<br/>: 490 x 325 mm<br/>: 170 mm<br/>: 440 mm<br/>: 1.850 mm<br/>: 1.100 mm<br/>: 2.370 mm<br/>: 4.100 kg<br/>8-fold ram guide <br/>front protection by light guard<br/>manual stroke adjustment <br/>ram adjustment witch ratchet <br/>drive over gear <br/>combined clutch brake unit with pneumatic control <br/>fix table <br/>single and continuous stroke <br/>foot pedal and 2 hand control <br/>mech. overload safety device <br/>manual central lubrication <br/>machine and equipment in conformity with ce-regulations as well as the austrian and german <br/>accident prevention regulations <br/>user manual in german and english<br/><br/>option:<br/>bolster plate euro  2.150,--<br/><br/>we have more than 75 references!<br/><br/>pressforce: 63 to<br/>table: 750 x 500 mm<br/>clutch: disc<br/>activation of clutch: pneumatic<br/>stroke: 4 - 102 mm<br/>number of strokes: 54  1/min<br/>motor: 7,5 kw<br/>dist. betw. table and ram max.: 350 mm<br/>hole in ram: 50 mm<br/>throat depth: 270 mm<br/>ram surface: 490 x 325 mm<br/>hole in table: 170 mm<br/>distance between uprights: 440 mm<br/>length: 1.850 mm<br/>width: 1.100 mm<br/>height: 2.370 mm<br/>weight: 4.100 kg<br/><br/><br/><br/> : 63 TO
: 750 X 500 MM
: 4 - 102 MM
: 7,5 KW
: X. 350 MA MM
: 50 MM
: 270 MM
: 490 X 325 MM
: 170 MM
: 440 MM
: 1.850 MM
: 1.100 MM
: 2.370 MM
: 4.100 KG
8-FOLD RAM GUIDE
FRONT PROTECTION BY LIGHT GUARD
MANUAL STROKE ADJUSTMENT
RAM ADJUSTMENT WITCH RATCHET
DRIVE OVER GEAR
COMBINED CLUTCH BRAKE UNIT WITH PNEUMATIC CONTROL
FIX TABLE
SINGLE AND CONTINUOUS STROKE
FOOT PEDAL AND 2 HAND CONTROL
MECH. OVERLOAD SAFETY DEVICE
MANUAL CENTRAL LUBRICATION
MACHINE AND EQUIPMENT IN CONFORMITY WITH CE-REGULATIONS AS WELL AS THE AUSTRIAN AND GERMAN
ACCIDENT PREVENTION REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

OPTION:
BOLSTER PLATE EURO  2.150,--

WE HAVE MORE THAN 75 REFERENCES!

PRESSFORCE: 63 TO
TABLE: 750 X 500 MM
CLUTCH: DISC
ACTIVATION OF CLUTCH: PNEUMATIC
STROKE: 4 - 102 MM
NUMBER OF STROKES: 54 1/MIN
MOTOR: 7,5 KW
DIST. BETW. TABLE AND RAM MAX.: 350 MM
HOLE IN RAM: 50 MM
THROAT DEPTH: 270 MM
RAM SURFACE: 490 X 325 MM
HOLE IN TABLE: 170 MM
DISTANCE BETWEEN UPRIGHTS: 440 MM
LENGTH: 1.850 MM
WIDTH: 1.100 MM
HEIGHT: 2.370 MM
WEIGHT: 4.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-capacity		:	110	ton
table dimensions	:	920 x 600 	mm
ram dimensions	:	540 x 290	mm
shut height max.	:	440	mm
throat		:	300	mm
passage hole in table	:	300 x 180	mm
stroke		:	20 - 150	mm
ram adjustment	:	85	mm
strokes per minute	:	70	min-¹
motor power	:	11,5	kw
dimensions machine wxdxh	:	2,25 x 1,20 x 2,36	m
weight machine ca.	:	5.100	kg
control		:	2-hands
machine is equipped with;
•	safety plate overload protection
•	auto. “vogel” lubrication system
 CAPACITY : 110 TON TABLE DIMENSIONS : 920 X 600 MM RAM DIMENSIONS : 540 X 290 MM SHUT HEIGHT MAX. : 440 MM THROAT : 300 MM PASSAGE HOLE IN TABLE : 300 X 180 MM STROKE : 20 - 150 MM RAM ADJUSTMENT : 85 MM STROKES PER MINUTE : 70 MIN-¹ MOTOR POWER : 11,5 KW DIMENSIONS MACHINE WXDXH : 2,25 X 1,20 X 2,36 M WEIGHT MACHINE CA. : 5.100 KG CONTROL : 2-HANDS MACHINE IS EQUIPPED WITH; • SAFETY PLATE OVERLOAD PROTECTION • AUTO. “VOGEL” LUBRICATION SYSTEM
Vendedor: Voortman Machines
Año de construcción: usado
Precio: 33.700 €
Ubicación: Land-: 10 mm<br/>: 8 mm<br/>: 6 mm<br/>: 2.050 mm<br/>: 220 mm<br/>: 220 mm<br/>: 160 mm<br/>: 3.700 mm<br/>: 1.200 mm<br/>: 1.400 mm<br/>: 7,5 kw<br/>: 4.500 kg<br/>standard equipment<br/><br/>fully hydraulic drive of upper roll and lower roll<br/>hydraulic infeed of lower and side roll<br/>digital read-out of lower and side rolls position<br/>conical bending device<br/>hydraulic load relieving of upper roll<br/>hydraulic drop-end bearing  <br/>hardened rolls <br/>2 working speeds<br/>central lubrication system<br/>protection against overload<br/>moveable control pane <br/>user manual in german and english <br/>machine and equipment according to the ce regulations <br/><br/>optional equipment<br/><br/>ground and polished rolls<br/>infinitely adustable speed of rolls<br/>hydraulic/mechanic adjustable upper and lateral supports<br/>aut. material withdrawal<br/>changeable upper roll for especially narrow bending radii<br/><br/>important issues at conical bending: <br/><br/>the max. sheet metal thickness is equivalent to 50 % of nominal capacity <br/>the cone length can be max. 30 % ore must be more than 60 % of roll length <br/>hardened rolls are recommended<br/><br/>(sample photo)<br/><br/>bending capacity without pre-bending at 5x upper tool diam.: 10 mm<br/>bending capacity with pre-bending at 5x upper tool diam.: 8 mm<br/>bending capacity with pre-bending at 1,5x upper tool diam.: 6 mm<br/>bending length: 2.050 mm<br/>upper roll diameter: 220 mm <br/>lower roll diameter: 220 mm  <br/>side roll diameter: 160 mm<br/>working speed: 1,5-6 m/min<br/>length: 3.700 mm <br/>width: 1.200 mm <br/>heigth: 1.400 mm <br/>motor power: 7,5 kw<br/>weight: 4.500 kg<br/><br/><br/><br/> : 10 MM
: 8 MM
: 6 MM
: 2.050 MM
: 220 MM
: 220 MM
: 160 MM
: 3.700 MM
: 1.200 MM
: 1.400 MM
: 7,5 KW
: 4.500 KG
STANDARD EQUIPMENT

FULLY HYDRAULIC DRIVE OF UPPER ROLL AND LOWER ROLL
HYDRAULIC INFEED OF LOWER AND SIDE ROLL
DIGITAL READ-OUT OF LOWER AND SIDE ROLLS POSITION
CONICAL BENDING DEVICE
HYDRAULIC LOAD RELIEVING OF UPPER ROLL
HYDRAULIC DROP-END BEARING 
HARDENED ROLLS
2 WORKING SPEEDS
CENTRAL LUBRICATION SYSTEM
PROTECTION AGAINST OVERLOAD
MOVEABLE CONTROL PANE
USER MANUAL IN GERMAN AND ENGLISH 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

OPTIONAL EQUIPMENT

GROUND AND POLISHED ROLLS
INFINITELY ADUSTABLE SPEED OF ROLLS
HYDRAULIC/MECHANIC ADJUSTABLE UPPER AND LATERAL SUPPORTS
AUT. MATERIAL WITHDRAWAL
CHANGEABLE UPPER ROLL FOR ESPECIALLY NARROW BENDING RADII

IMPORTANT ISSUES AT CONICAL BENDING:

THE MAX. SHEET METAL THICKNESS IS EQUIVALENT TO 50 % OF NOMINAL CAPACITY 
THE CONE LENGTH CAN BE MAX. 30 % ORE MUST BE MORE THAN 60 % OF ROLL LENGTH 
HARDENED ROLLS ARE RECOMMENDED

(SAMPLE PHOTO)

BENDING CAPACITY WITHOUT PRE-BENDING AT 5X UPPER TOOL DIAM.: 10 MM
BENDING CAPACITY WITH PRE-BENDING AT 5X UPPER TOOL DIAM.: 8 MM
BENDING CAPACITY WITH PRE-BENDING AT 1,5X UPPER TOOL DIAM.: 6 MM
BENDING LENGTH: 2.050 MM
UPPER ROLL DIAMETER: 220 MM
LOWER ROLL DIAMETER: 220 MM
SIDE ROLL DIAMETER: 160 MM
WORKING SPEED: 1,5-6 M/MIN
LENGTH: 3.700 MM
WIDTH: 1.200 MM
HEIGTH: 1.400 MM
MOTOR POWER: 7,5 KW
WEIGHT: 4.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-nominal force 450 kn
piston stroke, in steps adjustable 6-90 mm
tappet adjustment 60 mm
throat depth 200 mm
stroke rate 130 rpm idle
gfx7y27ha
mould installation height at grã¶ã?thub
down and adjustment up 300 mm
table clamping area (wxd) 650 x 390 mm
plunger clamping area (wxd) 360 x 330 mm
pin hole in the tappet 40 mm
power of main motor 5.5 kw
height approx. 2,377 mm the machine

weight of machine 2,900 kg with hydr. overload protection, motorized ram adjustment, semi automatic stroke adjustment, latest uvv NOMINAL FORCE 450 KN PISTON STROKE, IN STEPS ADJUSTABLE 6-90 MM TAPPET ADJUSTMENT 60 MM THROAT DEPTH 200 MM STROKE RATE 130 RPM IDLE GFX7Y27HA MOULD INSTALLATION HEIGHT AT GR&ATILDE;&PARA;&ATILDE;?THUB DOWN AND ADJUSTMENT UP 300 MM TABLE CLAMPING AREA (WXD) 650 X 390 MM PLUNGER CLAMPING AREA (WXD) 360 X 330 MM PIN HOLE IN THE TAPPET 40 MM POWER OF MAIN MOTOR 5.5 KW HEIGHT APPROX. 2,377 MM THE MACHINE WEIGHT OF MACHINE 2,900 KG WITH HYDR. OVERLOAD PROTECTION, MOTORIZED RAM ADJUSTMENT, SEMI AUTOMATIC STROKE ADJUSTMENT, LATEST UVV
Vendedor: Wimmer- Umformtechnik GmbH
Año de construcción: usado
Precio: 8.880 €
Ubicación: Land-: 40/45 mm<br/>: 4 mk<br/>: 350 mm<br/>: 1,5 kw<br/>: 435 kg<br/>erlo  (made in spain)<br/><br/>for manufacturing use<br/><br/>high quality geardrive machine <br/> 3 automatic feeds <br/>cooling equipment <br/>chuck protection <br/>left-right drilling <br/>user manual in german<br/><br/>reverse for tapping ? 570,-- <br/><br/>drilling capacity: 40/45 mm<br/>mt: 4 mk<br/>gap: 350 mm<br/>revs: 93 - 1.420 rpm (8)<br/>feeds: 0,10 - 0,18 - 0,24 mm/min (3)<br/>motor: 1,5 kw<br/>weight: 435 kg<br/><br/><br/><br/> : 40/45 MM
: 4 MK
: 350 MM
: 1,5 KW
: 435 KG
ERLO  (MADE IN SPAIN)

FOR MANUFACTURING USE

HIGH QUALITY GEARDRIVE MACHINE
3 AUTOMATIC FEEDS
COOLING EQUIPMENT
CHUCK PROTECTION
LEFT-RIGHT DRILLING
USER MANUAL IN GERMAN

REVERSE FOR TAPPING ? 570,--

DRILLING CAPACITY: 40/45 MM
MT: 4 MK
GAP: 350 MM
REVS: 93 - 1.420 RPM (8)
FEEDS: 0,10 - 0,18 - 0,24 MM/MIN (3)
MOTOR: 1,5 KW
WEIGHT: 435 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-.
power 160 to
speed 50 rpm
.
throat depth 450 mm
table approx. 1080 x 750 mm
pestle approx. 750 x 500 mm
piston stroke 20-160 mm
.
free stand passage back 700 mm
slide weight compensation
motorized slide adjustment
hydraulic overload protection
2-hand release
foot switch
.
handeinlegesicher, new uvv tested, with test book
.
.................................................................................................... . POWER 160 TO SPEED 50 RPM . THROAT DEPTH 450 MM TABLE APPROX. 1080 X 750 MM PESTLE APPROX. 750 X 500 MM PISTON STROKE 20-160 MM . FREE STAND PASSAGE BACK 700 MM SLIDE WEIGHT COMPENSATION MOTORIZED SLIDE ADJUSTMENT HYDRAULIC OVERLOAD PROTECTION 2-HAND RELEASE FOOT SWITCH . HANDEINLEGESICHER, NEW UVV TESTED, WITH TEST BOOK . ....................................................................................................
Vendedor: Schrenk Werkzeugmaschinen
Año de construcción: usado
Precio: 10.700 €
Ubicación: Land-: 100 to<br/>: 5,5 kw<br/>: 300 mm<br/>: 1.570 mm<br/>: 220 x 160 mm<br/>: 2.560 mm<br/>: 1.000 mm<br/>: 2.480 mm<br/>: 1.755 kg<br/>horizontal movable cylinder by handwheel<br/>steel welded frame<br/>stop at any position<br/>pressure manometer<br/>safety valve against overloading<br/>2 v-blocks<br/>table height adjustable<br/>table up-down movement attachment<br/>control by operating lever<br/>according to ce regulations<br/>user manual in german and english<br/><br/>(sample photo shows mod. hdk 1570/150)<br/><br/>bending force: 100 to<br/>motor power: 5,5 kw<br/>stroke: 300 mm<br/>distance between columns:	1.570 mm<br/>piston Ø: 220 x 160 mm<br/>advance speed: 8 mm/s<br/>working speed: 5 mm/s<br/>return speed: 10 mm/s<br/>length: 2.560 mm<br/>width: 1.000 mm<br/>heigth: 2.480 mm<br/>weight: 1.755 kg<br/><br/><br/><br/> : 100 TO
: 5,5 KW
: 300 MM
: 1.570 MM
: 220 X 160 MM
: 2.560 MM
: 1.000 MM
: 2.480 MM
: 1.755 KG
HORIZONTAL MOVABLE CYLINDER BY HANDWHEEL
STEEL WELDED FRAME
STOP AT ANY POSITION
PRESSURE MANOMETER
SAFETY VALVE AGAINST OVERLOADING
2 V-BLOCKS
TABLE HEIGHT ADJUSTABLE
TABLE UP-DOWN MOVEMENT ATTACHMENT
CONTROL BY OPERATING LEVER
ACCORDING TO CE REGULATIONS
USER MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. HDK 1570/150)

BENDING FORCE: 100 TO
MOTOR POWER: 5,5 KW
STROKE: 300 MM
DISTANCE BETWEEN COLUMNS: 1.570 MM
PISTON Ø: 220 X 160 MM
ADVANCE SPEED: 8 MM/S
WORKING SPEED: 5 MM/S
RETURN SPEED: 10 MM/S
LENGTH: 2.560 MM
WIDTH: 1.000 MM
HEIGTH: 2.480 MM
WEIGHT: 1.755 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-capacity: to 125. print performance lubrication, overload protection in the plunger, multi-plate clutch front bearing, ejector in the ram, only approved for safe tools stroke rate: 50 min-1 piston stroke: 20-120 mm slide adjustment: 100 mm max sheet thickness 13 mm gr. distance table plunger's largest stroke: 400mm table surface: 800x620mm tappet surface: 500x400mm diarrhea hole: ã? 350 mm throat depth: 330 mm weight: 7750 kg  CAPACITY: TO 125. PRINT PERFORMANCE LUBRICATION, OVERLOAD PROTECTION IN THE PLUNGER, MULTI-PLATE CLUTCH FRONT BEARING, EJECTOR IN THE RAM, ONLY APPROVED FOR SAFE TOOLS STROKE RATE: 50 MIN-1 PISTON STROKE: 20-120 MM SLIDE ADJUSTMENT: 100 MM MAX SHEET THICKNESS 13 MM GR. DISTANCE TABLE PLUNGER'S LARGEST STROKE: 400MM TABLE SURFACE: 800X620MM TAPPET SURFACE: 500X400MM DIARRHEA HOLE: &ATILDE;? 350 MM THROAT DEPTH: 330 MM WEIGHT: 7750 KG
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 4.730 €
Ubicación: Land-: 25/30 mm<br/>: 250 mm<br/>: 120 mm<br/>: 250 mm<br/>: 170 - 660 mm<br/>: 1.216 mm<br/>: 100 mm<br/>: 300 x 270 mm<br/>: 600 x 380 mm<br/>: 1,1/1,6 ps<br/>: 380 mm<br/>: 600 mm<br/>: 2.060 mm<br/>: 260 kg<br/>erlo  (made in spain)<br/><br/>for manufacturing use<br/><br/>high quality geardrive machine <br/>manual feed<br/>left-right drilling <br/>automatic tool ejector<br/>adjustable depth stop<br/>table with t-slots<br/>base plate with t-slots<br/>drill guard with micro switch<br/>lightening equipment<br/>user manual in english or german<br/>ce<br/><br/>option: <br/>reverse for tapping                                ?   570,--<br/><br/><br/>alternative: <br/>model tsr 25 (with coolant equipment):    ?   5.220,--<br/><br/>drilling capacity (steel/cast iron): 25/30 mm<br/>tapping capacity (steel/cast iron): m22 / m24<br/>more taper: 3<br/>gap: 250 mm<br/>revs: 65 - 3.060 r/min (8)<br/>spindle stroke: 120 mm<br/>distance spindle-column: 250 mm<br/>distance spindle-table: 170 - 660 mm<br/>distance spindle-base: 1.216 mm<br/>column diameter: 100 mm<br/>table: 300 x 270 mm<br/>base dimensions: 600 x 380 mm<br/>motor: 1,1/1,6 ps<br/>length: 380 mm<br/>width: 600 mm<br/>height: 2.060 mm<br/>weight: 260 kg<br/><br/><br/><br/> : 25/30 MM
: 250 MM
: 120 MM
: 250 MM
: 170 - 660 MM
: 1.216 MM
: 100 MM
: 300 X 270 MM
: 600 X 380 MM
: 1,1/1,6 PS
: 380 MM
: 600 MM
: 2.060 MM
: 260 KG
ERLO  (MADE IN SPAIN)

FOR MANUFACTURING USE

HIGH QUALITY GEARDRIVE MACHINE
MANUAL FEED
LEFT-RIGHT DRILLING
AUTOMATIC TOOL EJECTOR
ADJUSTABLE DEPTH STOP
TABLE WITH T-SLOTS
BASE PLATE WITH T-SLOTS
DRILL GUARD WITH MICRO SWITCH
LIGHTENING EQUIPMENT
USER MANUAL IN ENGLISH OR GERMAN
CE

OPTION:
REVERSE FOR TAPPING                                ?   570,--


ALTERNATIVE:
MODEL TSR 25 (WITH COOLANT EQUIPMENT):    ?   5.220,--

DRILLING CAPACITY (STEEL/CAST IRON): 25/30 MM
TAPPING CAPACITY (STEEL/CAST IRON): M22 / M24
MORE TAPER: 3
GAP: 250 MM
REVS: 65 - 3.060 R/MIN (8)
SPINDLE STROKE: 120 MM
DISTANCE SPINDLE-COLUMN: 250 MM
DISTANCE SPINDLE-TABLE: 170 - 660 MM
DISTANCE SPINDLE-BASE: 1.216 MM
COLUMN DIAMETER: 100 MM
TABLE: 300 X 270 MM
BASE DIMENSIONS: 600 X 380 MM
MOTOR: 1,1/1,6 PS
LENGTH: 380 MM
WIDTH: 600 MM
HEIGHT: 2.060 MM
WEIGHT: 260 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 250 €
Ubicación: Land-digital differential pressure transmitter, deltabar s fmd76, endress & hauser
manufacturer: endress & hauser
type: deltabar s fmd76-1mj7f1mbaa

- with ceranic sensor
- overload-proof and function-monitored, communication via hart, profibus pa
- material: 1.4404
- flange dn80, pn40
- ex protected version

condition used, but almost new
functional warranty as agreed DIGITAL DIFFERENTIAL PRESSURE TRANSMITTER, DELTABAR S FMD76, ENDRESS & HAUSER MANUFACTURER: ENDRESS & HAUSER TYPE: DELTABAR S FMD76-1MJ7F1MBAA - WITH CERANIC SENSOR - OVERLOAD-PROOF AND FUNCTION-MONITORED, COMMUNICATION VIA HART, PROFIBUS PA - MATERIAL: 1.4404 - FLANGE DN80, PN40 - EX PROTECTED VERSION CONDITION USED, BUT ALMOST NEW FUNCTIONAL WARRANTY AS AGREED
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 5.300 €
Ubicación: Land-: 40 mm<br/>: -32 m<br/>: 4 mk<br/>: 300 mm<br/>: 150 mm<br/>: 150 - 950 mm<br/>: 1.310 mm<br/>: 125 mm<br/>: 400 x 420 mm<br/>: 1,3 / 2,4 kw<br/>: 655 mm<br/>: 400 mm<br/>: 1.960 mm<br/>: 295 kg<br/>erlo  (made in spain)<br/><br/>for demanding workshop use<br/><br/>column drilling machine with vario gear<br/>variable revs<br/>manual feed<br/>left-right drilling<br/>table with t-slots<br/>depth adustable end<br/>tool ejector<br/>drill guard<br/>coolant equipment and machine base with t-slots<br/>ce norms<br/>user manual in german<br/><br/><br/>    options:               lighting equipment   ? 180,--     reverse for tapping   ? 570,--    <br/><br/>drilling capacity: 40 mm<br/>tapping capacity: m-32<br/>spindle cone: mk 4<br/>gap: 300 mm<br/>speed range: variable 80 - 1.170 rpm<br/>spindle stroke: 150 mm<br/>distance spindle-table: 150 - 950 mm<br/>distance spindle-base: 1.310 mm<br/>column diameter: 125 mm<br/>table dimensions: 400 x 420 mm<br/>motor: 1,3 / 2,4 kw<br/>length: 655 mm<br/>width: 400 mm<br/>height: 1.960 mm<br/>weight: 295 kg<br/><br/><br/><br/> : 40 MM
: -32 M
: 4 MK
: 300 MM
: 150 MM
: 150 - 950 MM
: 1.310 MM
: 125 MM
: 400 X 420 MM
: 1,3 / 2,4 KW
: 655 MM
: 400 MM
: 1.960 MM
: 295 KG
ERLO  (MADE IN SPAIN)

FOR DEMANDING WORKSHOP USE

COLUMN DRILLING MACHINE WITH VARIO GEAR
VARIABLE REVS
MANUAL FEED
LEFT-RIGHT DRILLING
TABLE WITH T-SLOTS
DEPTH ADUSTABLE END
TOOL EJECTOR
DRILL GUARD
COOLANT EQUIPMENT AND MACHINE BASE WITH T-SLOTS
CE NORMS
USER MANUAL IN GERMAN


OPTIONS:       LIGHTING EQUIPMENT ? 180,-- REVERSE FOR TAPPING ? 570,--

DRILLING CAPACITY: 40 MM
TAPPING CAPACITY: M-32
SPINDLE CONE: MK 4
GAP: 300 MM
SPEED RANGE: VARIABLE 80 - 1.170 RPM
SPINDLE STROKE: 150 MM
DISTANCE SPINDLE-TABLE: 150 - 950 MM
DISTANCE SPINDLE-BASE: 1.310 MM
COLUMN DIAMETER: 125 MM
TABLE DIMENSIONS: 400 X 420 MM
MOTOR: 1,3 / 2,4 KW
LENGTH: 655 MM
WIDTH: 400 MM
HEIGHT: 1.960 MM
WEIGHT: 295 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-semi-automatic cold saw machines hdm 1412 with stable swivel bearings for sawing of steel construction profiles â?¢ infinitely variable-frequency-controlled cutting speed â?¢ electro-mechanical blade feed
â?¢ automatic regulation of feed and cutting speed by active power detection
â?¢ hydraulic horizontal clamping device
â?¢ electronic overload protection
â?¢ heating system with thermostat for hydraulic power pack
â?¢ savings lubrication by means of mikrodosieranlage, connection to the factory air supply possible
â?¢ vertical clamping device to cut bundles
â?¢ saw blade-positioning device
â?¢ laser to represent the cutting edge
â?¢ software proficut
â?¢ work area 90 degrees - rectangle material 440 x 440 (mm), 1000 x 450 (mm)
â?¢ smallest material cross section 50 x 50 (mm)
â?¢ segment saw blade diameter x width 1430 x 9, 5 (mm)
â?¢ saw blade holder 100 / 4 x 30/250 (mm)
â?¢ saw motor frequency controlled 22 kw
â?¢ hydraulic power unit 3kw (capacity 23 l / min)
â?¢ vertical vise 1.5 kw
â?¢ hydraulic heating 1 kw
â?¢ cutting speeds 8-30 m / min
â?¢ saw blade feed 0-400 mm / min, rapid return of blade 2000 mm / min
â?¢ working height 760 mm above floor
â?¢ compressed air connection (customer) 6-8 bar
â?¢ weight 9500 kg (machine without accessories)
â?¢ machine dimensions (lxwxh in mm) 3700 x 1500 x 3200
â?¢ electrical supply: 3 phases + neutral + earth 400v / 50 hz length measuring device l 220

â?¢ measuring range up to 15 m
â?¢ measuring vehicle speed 0-30 m / min
â?¢ i-beam, l - and u-steel square tubes, flat steel from 20 mm
â?¢ data input via control panel
â?¢ heavy, moveable foot
â?¢ geared motor for up and disengaging of the stop arm
â?¢ stop arm with upstream photoelectric sensor for automatic switching of the transport speed of express on creep
â?¢ stop plate capacitive switching
â?¢ automatic trigger of clamping operations
â?¢ attachment piece for measuring short sections.

transportation t13

â?¢ operation via joy-stick
â?¢ roller conveyor in separate elements, solid welded construction
â?¢ maintenance-free ball bearing casters
â?¢ track rollers on the supply and removal page with frequency-regulated gear motor (continuous)
â?¢ vertical stop rolling to the longitudinal guidance on the fixed investment side
â?¢ material length: feed roller 2.2-15 m, removal roller 1.2-15 m
â?¢ working height 760 mm
â?¢ roll diameter 77, 4 mm, roll width 1130 mm, width 1020 mm
â?¢ transport speed infinitely variable 0-30 m / min

SEMI-AUTOMATIC COLD SAW MACHINES HDM 1412 WITH STABLE SWIVEL BEARINGS FOR SAWING OF STEEL CONSTRUCTION PROFILES &ACIRC;?&CENT; INFINITELY VARIABLE-FREQUENCY-CONTROLLED CUTTING SPEED &ACIRC;?&CENT; ELECTRO-MECHANICAL BLADE FEED &ACIRC;?&CENT; AUTOMATIC REGULATION OF FEED AND CUTTING SPEED BY ACTIVE POWER DETECTION &ACIRC;?&CENT; HYDRAULIC HORIZONTAL CLAMPING DEVICE &ACIRC;?&CENT; ELECTRONIC OVERLOAD PROTECTION &ACIRC;?&CENT; HEATING SYSTEM WITH THERMOSTAT FOR HYDRAULIC POWER PACK &ACIRC;?&CENT; SAVINGS LUBRICATION BY MEANS OF MIKRODOSIERANLAGE, CONNECTION TO THE FACTORY AIR SUPPLY POSSIBLE &ACIRC;?&CENT; VERTICAL CLAMPING DEVICE TO CUT BUNDLES &ACIRC;?&CENT; SAW BLADE-POSITIONING DEVICE &ACIRC;?&CENT; LASER TO REPRESENT THE CUTTING EDGE &ACIRC;?&CENT; SOFTWARE PROFICUT &ACIRC;?&CENT; WORK AREA 90 DEGREES - RECTANGLE MATERIAL 440 X 440 (MM), 1000 X 450 (MM) &ACIRC;?&CENT; SMALLEST MATERIAL CROSS SECTION 50 X 50 (MM) &ACIRC;?&CENT; SEGMENT SAW BLADE DIAMETER X WIDTH 1430 X 9, 5 (MM) &ACIRC;?&CENT; SAW BLADE HOLDER 100 / 4 X 30/250 (MM) &ACIRC;?&CENT; SAW MOTOR FREQUENCY CONTROLLED 22 KW &ACIRC;?&CENT; HYDRAULIC POWER UNIT 3KW (CAPACITY 23 L / MIN) &ACIRC;?&CENT; VERTICAL VISE 1.5 KW &ACIRC;?&CENT; HYDRAULIC HEATING 1 KW &ACIRC;?&CENT; CUTTING SPEEDS 8-30 M / MIN &ACIRC;?&CENT; SAW BLADE FEED 0-400 MM / MIN, RAPID RETURN OF BLADE 2000 MM / MIN &ACIRC;?&CENT; WORKING HEIGHT 760 MM ABOVE FLOOR &ACIRC;?&CENT; COMPRESSED AIR CONNECTION (CUSTOMER) 6-8 BAR &ACIRC;?&CENT; WEIGHT 9500 KG (MACHINE WITHOUT ACCESSORIES) &ACIRC;?&CENT; MACHINE DIMENSIONS (LXWXH IN MM) 3700 X 1500 X 3200 &ACIRC;?&CENT; ELECTRICAL SUPPLY: 3 PHASES + NEUTRAL + EARTH 400V / 50 HZ LENGTH MEASURING DEVICE L 220 &ACIRC;?&CENT; MEASURING RANGE UP TO 15 M &ACIRC;?&CENT; MEASURING VEHICLE SPEED 0-30 M / MIN &ACIRC;?&CENT; I-BEAM, L - AND U-STEEL SQUARE TUBES, FLAT STEEL FROM 20 MM &ACIRC;?&CENT; DATA INPUT VIA CONTROL PANEL &ACIRC;?&CENT; HEAVY, MOVEABLE FOOT &ACIRC;?&CENT; GEARED MOTOR FOR UP AND DISENGAGING OF THE STOP ARM &ACIRC;?&CENT; STOP ARM WITH UPSTREAM PHOTOELECTRIC SENSOR FOR AUTOMATIC SWITCHING OF THE TRANSPORT SPEED OF EXPRESS ON CREEP &ACIRC;?&CENT; STOP PLATE CAPACITIVE SWITCHING &ACIRC;?&CENT; AUTOMATIC TRIGGER OF CLAMPING OPERATIONS &ACIRC;?&CENT; ATTACHMENT PIECE FOR MEASURING SHORT SECTIONS. TRANSPORTATION T13 &ACIRC;?&CENT; OPERATION VIA JOY-STICK &ACIRC;?&CENT; ROLLER CONVEYOR IN SEPARATE ELEMENTS, SOLID WELDED CONSTRUCTION &ACIRC;?&CENT; MAINTENANCE-FREE BALL BEARING CASTERS &ACIRC;?&CENT; TRACK ROLLERS ON THE SUPPLY AND REMOVAL PAGE WITH FREQUENCY-REGULATED GEAR MOTOR (CONTINUOUS) &ACIRC;?&CENT; VERTICAL STOP ROLLING TO THE LONGITUDINAL GUIDANCE ON THE FIXED INVESTMENT SIDE &ACIRC;?&CENT; MATERIAL LENGTH: FEED ROLLER 2.2-15 M, REMOVAL ROLLER 1.2-15 M &ACIRC;?&CENT; WORKING HEIGHT 760 MM &ACIRC;?&CENT; ROLL DIAMETER 77, 4 MM, ROLL WIDTH 1130 MM, WIDTH 1020 MM &ACIRC;?&CENT; TRANSPORT SPEED INFINITELY VARIABLE 0-30 M / MIN
Vendedor: Rhenus Port Logistics Rhein-Ruhr GmbH
Año de construcción: usado
Precio: 1.550 €
Ubicación: Land-: 75 mm<br/>: 2.000 x 75 mm<br/>: 200 x 75 x 42 mm<br/>: 605 mm<br/>: 2.800 1/ min<br/>: 3 kw<br/>: 90 kg<br/>double suction unit<br/>closed grinding head for effective suction<br/>brake motor<br/>thermal overload protection<br/>adjustable  workpiece support<br/>eye protection<br/>adjustable working height<br/>grinding belt quick change system<br/>high band speed<br/>large surface grinding area<br/>quick deburring<br/>large contact wheel<br/>users manual in german<br/>machine and equipment according to the ce-regulations<br/><br/>grinding width: 75 mm<br/>belt dimensions: 2.000 x 75 mm<br/>contact wheel: 200 x 75 x 42 mm<br/>grinding table: 605 mm<br/>speed: 2.800 1/min<br/>suction capacity: 630 m³/h<br/>motor power: 3 kw<br/>weight: 90 kg<br/><br/><br/><br/> : 75 MM
: 2.000 X 75 MM
: 200 X 75 X 42 MM
: 605 MM
: 2.800 1/ MIN
: 3 KW
: 90 KG
DOUBLE SUCTION UNIT
CLOSED GRINDING HEAD FOR EFFECTIVE SUCTION
BRAKE MOTOR
THERMAL OVERLOAD PROTECTION
ADJUSTABLE  WORKPIECE SUPPORT
EYE PROTECTION
ADJUSTABLE WORKING HEIGHT
GRINDING BELT QUICK CHANGE SYSTEM
HIGH BAND SPEED
LARGE SURFACE GRINDING AREA
QUICK DEBURRING
LARGE CONTACT WHEEL
USERS MANUAL IN GERMAN
MACHINE AND EQUIPMENT ACCORDING TO THE CE-REGULATIONS

GRINDING WIDTH: 75 MM
BELT DIMENSIONS: 2.000 X 75 MM
CONTACT WHEEL: 200 X 75 X 42 MM
GRINDING TABLE: 605 MM
SPEED: 2.800 1/MIN
SUCTION CAPACITY: 630 M³/H
MOTOR POWER: 3 KW
WEIGHT: 90 KG



Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more ERLO types: