179 ofertas

Año de construcción: usado
Ubicación: Land-plasma cutting machine esab pre-cutter dx 3 000
year of constr.: 2015
gauge: 3 000 mm
career length: 6 000 mm
cutting width: 2 500 mm
cutting length: 4 000 mm
bdz2o9glxt
carrier height: 465 mm
cutting thickness:
-oxy: 1 burner of 150 mm
4 burner of maximum 80 mm
plasma: according to plasma system
supply voltage: 230 v +/-10%
frequency: 50 hz +/-2%
power consumption: approx. 3 500 va
temperature: 5 degrees to 45 degrees c â°
relative humidity: 10% to 85%
 PLASMA CUTTING MACHINE ESAB PRE-CUTTER DX 3 000 YEAR OF CONSTR.: 2015 GAUGE: 3 000 MM CAREER LENGTH: 6 000 MM CUTTING WIDTH: 2 500 MM CUTTING LENGTH: 4 000 MM BDZ2O9GLXT CARRIER HEIGHT: 465 MM CUTTING THICKNESS: -OXY: 1 BURNER OF 150 MM 4 BURNER OF MAXIMUM 80 MM PLASMA: ACCORDING TO PLASMA SYSTEM SUPPLY VOLTAGE: 230 V +/-10% FREQUENCY: 50 HZ +/-2% POWER CONSUMPTION: APPROX. 3 500 VA TEMPERATURE: 5 DEGREES TO 45 DEGREES C ° RELATIVE HUMIDITY: 10% TO 85%
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 34.500 EU€
Ubicación: Land-plasma cutter ajan shp 260a is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. with these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. condition of the equipment good. PLASMA CUTTER AJAN SHP 260A IS A NUMERICALLY CONTROLLED OXYGEN SHEET CUTTING DEVICE, USING ORIGINAL CUTTING TOOLS MOUNTED ON IT, AND CAN BE GAS AND PLASMA TOOLS. WITH THESE TOOLS YOU CAN MAKE STRAIGHT CUTS AND LINEAR CUTS, ACCORDING TO PROGRAMMED CUTTING PROGRAMS OR BY MANUALLY CONTROLLING THE CUTTING PATH. CONDITION OF THE EQUIPMENT GOOD.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-esab plasma machine uxd-p 2000
the system is fully functional
ip8tx3mxe
we have performed repairs always using original spare parts.
-year of production 1999
components of the plasma system:
-machine bridge
-rails-post
-vacuum table
-plasma generator
-div. spare and wear parts
-complete documentation

there are still the program of columbus v3. 20, as well as the processing software modulib 1.16 with dongle for both programs. ESAB PLASMA MACHINE UXD-P 2000 THE SYSTEM IS FULLY FUNCTIONAL IP8TX3MXE WE HAVE PERFORMED REPAIRS ALWAYS USING ORIGINAL SPARE PARTS. -YEAR OF PRODUCTION 1999 COMPONENTS OF THE PLASMA SYSTEM: -MACHINE BRIDGE -RAILS-POST -VACUUM TABLE -PLASMA GENERATOR -DIV. SPARE AND WEAR PARTS -COMPLETE DOCUMENTATION THERE ARE STILL THE PROGRAM OF COLUMBUS V3. 20, AS WELL AS THE PROCESSING SOFTWARE MODULIB 1.16 WITH DONGLE FOR BOTH PROGRAMS.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-; accessories: arbeitsbreite:305, trommelanzahl (4 stck.) ; ACCESSORIES: ARBEITSBREITE:305, TROMMELANZAHL (4 STCK.)
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-power on time: 47622 h	
total operation time: 23309 h	
control system :	
heidenhain tnc 426	
table dimensions: 950 x 520 mm	
travel distances:	
x: 750 mm	
y: 510 mm	
z: 510 mm	
spindle power: 8.75 kva	
spindle speed: 6000 rpm	
tool changer positions: 20	
table load max: 450 kg	
tool holder: iso 40	
machine dimensions :	
2800 x 2920 x 2700 mm	
machine weight: 3200 kg	
accessories:	
probe heidenhain	
tool holder	
manual	
availability: 15.01.2019 POWER ON TIME: 47622 H TOTAL OPERATION TIME: 23309 H CONTROL SYSTEM : HEIDENHAIN TNC 426 TABLE DIMENSIONS: 950 X 520 MM TRAVEL DISTANCES: X: 750 MM Y: 510 MM Z: 510 MM SPINDLE POWER: 8.75 KVA SPINDLE SPEED: 6000 RPM TOOL CHANGER POSITIONS: 20 TABLE LOAD MAX: 450 KG TOOL HOLDER: ISO 40 MACHINE DIMENSIONS : 2800 X 2920 X 2700 MM MACHINE WEIGHT: 3200 KG ACCESSORIES: PROBE HEIDENHAIN TOOL HOLDER MANUAL AVAILABILITY: 15.01.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-table length: 1200 mm<br/>table width: 1200 mm<br/>table height: 900 mm<br/>weight of the machine ca.: 0,32 t<br/>dimensions: 1,2 x 1,2 x 0,9 m<br/>welding table / hole table:<br/>hole diameter: 28.3mm<br/>the table is made of 15mm thick, high-alloyed, plasma-nitrided steel s355j2 + n<br/>(st 52/3)<br/>plasma nitriding provides a hard surface layer.<br/>height adjustable from approx. 880 - 980mm<br/>bottom ribbed for reinforcement.<br/>including ground storage<br/>accessories optional !!<br/><br/><br/><br/><br/> TABLE LENGTH: 1200 MM
TABLE WIDTH: 1200 MM
TABLE HEIGHT: 900 MM
WEIGHT OF THE MACHINE CA.: 0,32 T
DIMENSIONS: 1,2 X 1,2 X 0,9 M
WELDING TABLE / HOLE TABLE:
HOLE DIAMETER: 28.3MM
THE TABLE IS MADE OF 15MM THICK, HIGH-ALLOYED, PLASMA-NITRIDED STEEL S355J2 + N
(ST 52/3)
PLASMA NITRIDING PROVIDES A HARD SURFACE LAYER.
HEIGHT ADJUSTABLE FROM APPROX. 880 - 980MM
BOTTOM RIBBED FOR REINFORCEMENT.
INCLUDING GROUND STORAGE
ACCESSORIES OPTIONAL !!




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-rotary harrow corner sicma type 250 ers, working width 2.50 m, cardan shaft, pto drive, cage roller, 3 point for seeder ROTARY HARROW CORNER SICMA TYPE 250 ERS, WORKING WIDTH 2.50 M, CARDAN SHAFT, PTO DRIVE, CAGE ROLLER, 3 POINT FOR SEEDER
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Precio: used machinery auction RESALE 65.000 €
Ubicación: Land-serial number: 117072 <br/>weight approx.: 5800 kg<br/>planing width: 260 mm<br/>dimensions (l x w x h) approx.: 5700 x 2100 x 1740 mm<br/>number of spindles: 8 <br/>planing height: 160 mm<br/>feed: 5-30 m/min<br/>surface table length: 2000 mm<br/>description: <h3>weing powermat 1000 <,/ h3>, moulder -------------------------------<br> machine is being cleaned and checked by a retailer at the moment <br>  <b>specifications: <,/ b>,<br> number of spindles: 8 pcs working width: 260 mm<br> planer height: 160 mm<br> calibration table length: 2000 mm<br> feed motor: 7 kw<br> - feed speed: 5-30 m / min.<br> control: weinig powercom<br> -nutenbett<br> -axis radial and axial cnc-controlled<br> -working width max. 260 mm working height max. 160 mm -abrichttisch 2 m long (including fügelineal)<br> - ruler lengthened to 3 m (for better alignment of long parts)<br> ruler with casters<br> -rail rim extension extended 0-15 mm<br> laser set to stop alignment (color red, laser class 2)<br> groove guide for short or difficult to work pieces, coated with -marathon powercoating. tabletops not removable. including einlegeleiste for transporting narrow workpieces on the slot guide (min. working width 25mm, chip removal at first lower tool holder max. 7 mm)<br> -5 nutenbetteinlagen opposite the first left tool holder for workpieces with the deck width:<br> - 120mm, -150mm, -180mm, -210mm, - 240mm<br> 5 nutenbetteinlagen opposite the right / left opposite<br> tool holder for workpieces with the cover width:<br> - 120mm, -150mm, -180mm, -210mm, - 240mm<br> automatic lubricant pump for removing the grooves.<br> a driven roller in the exit table, 210 mm wide, hardened<br> two driven rollers in the machine table and a sliding roller right / left opposite tool holder, 210 mm wide, hardened.<br> pressure rollers and guides<br> ------------------------------<br> pressure rollers from above, sprung lateral pressure roller on infeed table, sprung</b></h3> SERIAL NUMBER: 117072
WEIGHT APPROX.: 5800 KG
PLANING WIDTH: 260 MM
DIMENSIONS (L X W X H) APPROX.: 5700 X 2100 X 1740 MM
NUMBER OF SPINDLES: 8
PLANING HEIGHT: 160 MM
FEED: 5-30 M/MIN
SURFACE TABLE LENGTH: 2000 MM
DESCRIPTION:

WEING POWERMAT 1000 <,/ H3>, MOULDER -------------------------------
MACHINE IS BEING CLEANED AND CHECKED BY A RETAILER AT THE MOMENT
SPECIFICATIONS: <,/ B>,
NUMBER OF SPINDLES: 8 PCS WORKING WIDTH: 260 MM
PLANER HEIGHT: 160 MM
CALIBRATION TABLE LENGTH: 2000 MM
FEED MOTOR: 7 KW
- FEED SPEED: 5-30 M / MIN.
CONTROL: WEINIG POWERCOM
-NUTENBETT
-AXIS RADIAL AND AXIAL CNC-CONTROLLED
-WORKING WIDTH MAX. 260 MM WORKING HEIGHT MAX. 160 MM -ABRICHTTISCH 2 M LONG (INCLUDING FüGELINEAL)
- RULER LENGTHENED TO 3 M (FOR BETTER ALIGNMENT OF LONG PARTS)
RULER WITH CASTERS
-RAIL RIM EXTENSION EXTENDED 0-15 MM
LASER SET TO STOP ALIGNMENT (COLOR RED, LASER CLASS 2)
GROOVE GUIDE FOR SHORT OR DIFFICULT TO WORK PIECES, COATED WITH -MARATHON POWERCOATING. TABLETOPS NOT REMOVABLE. INCLUDING EINLEGELEISTE FOR TRANSPORTING NARROW WORKPIECES ON THE SLOT GUIDE (MIN. WORKING WIDTH 25MM, CHIP REMOVAL AT FIRST LOWER TOOL HOLDER MAX. 7 MM)
-5 NUTENBETTEINLAGEN OPPOSITE THE FIRST LEFT TOOL HOLDER FOR WORKPIECES WITH THE DECK WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM
5 NUTENBETTEINLAGEN OPPOSITE THE RIGHT / LEFT OPPOSITE
TOOL HOLDER FOR WORKPIECES WITH THE COVER WIDTH:
- 120MM, -150MM, -180MM, -210MM, - 240MM
AUTOMATIC LUBRICANT PUMP FOR REMOVING THE GROOVES.
A DRIVEN ROLLER IN THE EXIT TABLE, 210 MM WIDE, HARDENED
TWO DRIVEN ROLLERS IN THE MACHINE TABLE AND A SLIDING ROLLER RIGHT / LEFT OPPOSITE TOOL HOLDER, 210 MM WIDE, HARDENED.
PRESSURE ROLLERS AND GUIDES
------------------------------
PRESSURE ROLLERS FROM ABOVE, SPRUNG LATERAL PRESSURE ROLLER ON INFEED TABLE, SPRUNG

Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 7.200 €
Ubicación: Land-formteikantenanleimmaschine ima pca stating direct glue glue basin and strips the length unit

a video of the current machine can be sent on request.

built no cheap edges moped, but industrial-grade by ima for continuous use.

this model was built by brandt also referred to as ktd 82 h and ktd 820.

for hot melt adhesives and pu adhesive, 140-220 â° c.
inner radii are dependent on the bending capacity of the edge material from approx. 150 mm, external radius.
adjustable heater for heating of the material of edges with narrow radii. when you select of the emitter, the feed speed are automatically lowered to the preset value (very useful for narrow radii).

edge thickness of 0,4-3, 0 mm
edge height approx. 20-50 mm
supply 400v/2, 6kw
feed adjustable

operating instructions
ce mark
very good condition

the machine is used for the gluing of edge strips to shape machined plates parts, there are two variants:

1. in the case of small workpieces the part about the ball transfer units of the table on the solid banding unit is passed (see photos)
the edge material can be cut automatically on the electrically set length and is promoted automatically to the unit. no lengthy scoring with his hand.

2. for large and heavy workpieces is this attached with the block suction cups on the table, and the banding unit hanging passed by on the federbalancer and crane boom on the workpiece (see photos)
the edge tape is inserted with hand, may be cut but before by the streifenablaenger automatically to the desired level.

flexible molding edging at the highest level.

the feed button will start after inserting the edge strip. edge feed and spotlights can be controlled either via a handle switch or foot pedal.

accessories:
vacuum pump with 4 new block cups, 26 ball rolling, auflegeplatte, crane with spring.

we have even an ima pca in use for several years and are very satisfied.

dimensions approx. 1450 x 1000 x 3040 mm (lxwxh). weight approx. 550kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". FORMTEIKANTENANLEIMMASCHINE IMA PCA STATING DIRECT GLUE GLUE BASIN AND STRIPS THE LENGTH UNIT A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. BUILT NO CHEAP EDGES MOPED, BUT INDUSTRIAL-GRADE BY IMA FOR CONTINUOUS USE. THIS MODEL WAS BUILT BY BRANDT ALSO REFERRED TO AS KTD 82 H AND KTD 820. FOR HOT MELT ADHESIVES AND PU ADHESIVE, 140-220 &ACIRC;&DEG; C. INNER RADII ARE DEPENDENT ON THE BENDING CAPACITY OF THE EDGE MATERIAL FROM APPROX. 150 MM, EXTERNAL RADIUS. ADJUSTABLE HEATER FOR HEATING OF THE MATERIAL OF EDGES WITH NARROW RADII. WHEN YOU SELECT OF THE EMITTER, THE FEED SPEED ARE AUTOMATICALLY LOWERED TO THE PRESET VALUE (VERY USEFUL FOR NARROW RADII). EDGE THICKNESS OF 0,4-3, 0 MM EDGE HEIGHT APPROX. 20-50 MM SUPPLY 400V/2, 6KW FEED ADJUSTABLE OPERATING INSTRUCTIONS CE MARK VERY GOOD CONDITION THE MACHINE IS USED FOR THE GLUING OF EDGE STRIPS TO SHAPE MACHINED PLATES PARTS, THERE ARE TWO VARIANTS: 1. IN THE CASE OF SMALL WORKPIECES THE PART ABOUT THE BALL TRANSFER UNITS OF THE TABLE ON THE SOLID BANDING UNIT IS PASSED (SEE PHOTOS) THE EDGE MATERIAL CAN BE CUT AUTOMATICALLY ON THE ELECTRICALLY SET LENGTH AND IS PROMOTED AUTOMATICALLY TO THE UNIT. NO LENGTHY SCORING WITH HIS HAND. 2. FOR LARGE AND HEAVY WORKPIECES IS THIS ATTACHED WITH THE BLOCK SUCTION CUPS ON THE TABLE, AND THE BANDING UNIT HANGING PASSED BY ON THE FEDERBALANCER AND CRANE BOOM ON THE WORKPIECE (SEE PHOTOS) THE EDGE TAPE IS INSERTED WITH HAND, MAY BE CUT BUT BEFORE BY THE STREIFENABLAENGER AUTOMATICALLY TO THE DESIRED LEVEL. FLEXIBLE MOLDING EDGING AT THE HIGHEST LEVEL. THE FEED BUTTON WILL START AFTER INSERTING THE EDGE STRIP. EDGE FEED AND SPOTLIGHTS CAN BE CONTROLLED EITHER VIA A HANDLE SWITCH OR FOOT PEDAL. ACCESSORIES: VACUUM PUMP WITH 4 NEW BLOCK CUPS, 26 BALL ROLLING, AUFLEGEPLATTE, CRANE WITH SPRING. WE HAVE EVEN AN IMA PCA IN USE FOR SEVERAL YEARS AND ARE VERY SATISFIED. DIMENSIONS APPROX. 1450 X 1000 X 3040 MM (LXWXH). WEIGHT APPROX. 550KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 88.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-unused and still in the manufacturer packaging.

pfw 10 plasma nozzle, htr 12 plasma-high-voltage transformer and high power generator fg 5005 s

pretreatment with the openairâ® pfw10 plasma nozzle is done with very high contour accuracy and is potential-free (no transfer of voltage to the material). this type of plasma nozzle is mainly used when parts are to be plasma-treated with high process speed, high energy, or selectively when only a certain part of a work piece (e.g. a bonding groove) is to be treated. the openairâ® pfw10 plasma nozzles are so well suited for the potential-free plasma treatment of very sensitive components, such as circuit boards. UNUSED AND STILL IN THE MANUFACTURER PACKAGING. PFW 10 PLASMA NOZZLE, HTR 12 PLASMA-HIGH-VOLTAGE TRANSFORMER AND HIGH POWER GENERATOR FG 5005 S PRETREATMENT WITH THE OPENAIR&ACIRC;® PFW10 PLASMA NOZZLE IS DONE WITH VERY HIGH CONTOUR ACCURACY AND IS POTENTIAL-FREE (NO TRANSFER OF VOLTAGE TO THE MATERIAL). THIS TYPE OF PLASMA NOZZLE IS MAINLY USED WHEN PARTS ARE TO BE PLASMA-TREATED WITH HIGH PROCESS SPEED, HIGH ENERGY, OR SELECTIVELY WHEN ONLY A CERTAIN PART OF A WORK PIECE (E.G. A BONDING GROOVE) IS TO BE TREATED. THE OPENAIR&ACIRC;® PFW10 PLASMA NOZZLES ARE SO WELL SUITED FOR THE POTENTIAL-FREE PLASMA TREATMENT OF VERY SENSITIVE COMPONENTS, SUCH AS CIRCUIT BOARDS.
Vendedor: Maynards Europe GmbH
Año de construcción: usado
Precio: 550 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-seedbed combination becker ratiomat-s 3, hydr. folding, 3.90 m gare harrows, eradicators, krã¼mlerwalzen SEEDBED COMBINATION BECKER RATIOMAT-S 3, HYDR. FOLDING, 3.90 M GARE HARROWS, ERADICATORS, KR&ATILDE;&FRAC14;MLERWALZEN
Vendedor: Günter Sieben Landtechnik
Año de construcción: usado
Precio: 1.450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-power 5,5 kw
autom. star triangle switch
be hem length 1350 mm
right cutting width 800 mm
left width 2800 mm
guide fence
4 speeds 3/4/5/6000 rpm
parallelogram guard with wide and narrow hood
dust nozzle 㸠1 x 80 mm + 1 x 120 mm
automatic brake
extension table 800 mm POWER 5,5 KW AUTOM. STAR TRIANGLE SWITCH BE HEM LENGTH 1350 MM RIGHT CUTTING WIDTH 800 MM LEFT WIDTH 2800 MM GUIDE FENCE 4 SPEEDS 3/4/5/6000 RPM PARALLELOGRAM GUARD WITH WIDE AND NARROW HOOD DUST NOZZLE &ATILDE;&CEDIL; 1 X 80 MM + 1 X 120 MM AUTOMATIC BRAKE EXTENSION TABLE 800 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc laser cutting system

overhauled 2011 including new resonator
control siemens 840 d

laser power 2400 w
working range 3000 x 1500 mm
maximum sheet thickness st.: 15 mm
maximum sheet thickness vi: 6 mm

hi-las high pressure cutting (nitroline)
laser cutting head with 5 CNC LASER CUTTING SYSTEM OVERHAULED 2011 INCLUDING NEW RESONATOR CONTROL SIEMENS 840 D LASER POWER 2400 W WORKING RANGE 3000 X 1500 MM MAXIMUM SHEET THICKNESS ST.: 15 MM MAXIMUM SHEET THICKNESS VI: 6 MM HI-LAS HIGH PRESSURE CUTTING (NITROLINE) LASER CUTTING HEAD WITH 5 "LENS LASER CUTTING HEAD WITH 7.5 "LENS CUTTING HEAD QUICK CHANGE FACILITY AUTOM. SHEET METAL EDGES DETECTION POSITION LASERS DIODE PROGR. CUTTING GAS CHOICE MICROWELD PLASMALINE SPRINTLINE CONTROLLINE CONTOURLAS AUTOLAS PLUS OIL SPRAY AUTOM. PALLET CHANGER LONGITUDINAL CONVEYOR FOR WASTE MULTI CHAMBER EXTRACTION COMPACT DUST COLLECTOR LITE TOPS 100 TELE DIAGNOSIS NEW RESONATOR WITH MAGNET-MOUNTED TURBINE (10.2011)
Vendedor: Coenders Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 100 kg<br/>dimensions (l x w x h) approx.: 460 x 1000 x 650 mm<br/>description: mains voltage 230 v, mains voltage tolerance approx. +/- 10%, 50 a at 100% ed, open circuit voltage 95 v, welding current in a 0.5 to 50, pilot current in a 3 to 10, incl. plasma cutting torch pjb 100, other accessories WEIGHT APPROX.: 100 KG
DIMENSIONS (L X W X H) APPROX.: 460 X 1000 X 650 MM
DESCRIPTION: MAINS VOLTAGE 230 V, MAINS VOLTAGE TOLERANCE APPROX. +/- 10%, 50 A AT 100% ED, OPEN CIRCUIT VOLTAGE 95 V, WELDING CURRENT IN A 0.5 TO 50, PILOT CURRENT IN A 3 TO 10, INCL. PLASMA CUTTING TORCH PJB 100, OTHER ACCESSORIES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2012
hours of operation machine: 27.674 h (15.11.2018)
hours of operation a laser: 27.130 h (15.11.2018)
hours of operation a beam: 15.240 h (15.11.2018)
laser power: 6000 watts
work area: 3000 x 1500 x 115 mm
control: siemens sinumerik 840 d sl
max steel approx.: 25 mm
max stainless steel approx.: 25 mm
max aluminium approx.: 15 mm
space requirement approx.: 6500 x 7600 x 2200 mm
approximate weight machine: 12,000 kg
total connected load: 109 kva

standard equipment
-closed machine frame with integrated laser unit
-motion unit for high-precision machining
torque drive in combination with direct linear drives
-closed beam delivery
-a cutting head strategy
-cooling unit
-automatic pallet changer in longitudinal direction
-wide longitudinal conveyor
-lighting of workroom
-position laser diode
-spraying device
-pierceline
-focusline
-nitroline
-plasmaline

trumpf laser
-co2 laser truflow 6000
-maintenance-free turbo centrifugal blower
-high-frequency excitation
-laser control tasc
-laser power control
-logbook function laser

cutting head
-cutting head with a 250 mm lens
-universal quick exchange device (uti) with bus connections
-solar with health check
-controlline: treble and sheet metal outer edge detection

control
-control siemens sinumerik 840 d
-17 "touch screen
-automatic switch-off
-fast to produce
-contourline
-fastline
-flyline
-microweld
-adjustline
-teleservice

data transfer
-usb interface
rj-45 network port

security
-ce marking
-light barrier
-multi-chamber exhaust system
-compact collector
-fairing with makrolonscheiben

programming - simple workshop programming
-advanced workshop programming

advanced machine equipment
-machine up to 43 degrees ambient temperature
-pallet changer crosswise incl. safety device
-detectline: precision sheet metal stock acquisition
-coolline

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2012 HOURS OF OPERATION MACHINE: 27.674 H (15.11.2018) HOURS OF OPERATION A LASER: 27.130 H (15.11.2018) HOURS OF OPERATION A BEAM: 15.240 H (15.11.2018) LASER POWER: 6000 WATTS WORK AREA: 3000 X 1500 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D SL MAX STEEL APPROX.: 25 MM MAX STAINLESS STEEL APPROX.: 25 MM MAX ALUMINIUM APPROX.: 15 MM SPACE REQUIREMENT APPROX.: 6500 X 7600 X 2200 MM APPROXIMATE WEIGHT MACHINE: 12,000 KG TOTAL CONNECTED LOAD: 109 KVA STANDARD EQUIPMENT -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -MOTION UNIT FOR HIGH-PRECISION MACHINING TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES -CLOSED BEAM DELIVERY -A CUTTING HEAD STRATEGY -COOLING UNIT -AUTOMATIC PALLET CHANGER IN LONGITUDINAL DIRECTION -WIDE LONGITUDINAL CONVEYOR -LIGHTING OF WORKROOM -POSITION LASER DIODE -SPRAYING DEVICE -PIERCELINE -FOCUSLINE -NITROLINE -PLASMALINE TRUMPF LASER -CO2 LASER TRUFLOW 6000 -MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER -HIGH-FREQUENCY EXCITATION -LASER CONTROL TASC -LASER POWER CONTROL -LOGBOOK FUNCTION LASER CUTTING HEAD -CUTTING HEAD WITH A 250 MM LENS -UNIVERSAL QUICK EXCHANGE DEVICE (UTI) WITH BUS CONNECTIONS -SOLAR WITH HEALTH CHECK -CONTROLLINE: TREBLE AND SHEET METAL OUTER EDGE DETECTION CONTROL -CONTROL SIEMENS SINUMERIK 840 D -17 "TOUCH SCREEN -AUTOMATIC SWITCH-OFF -FAST TO PRODUCE -CONTOURLINE -FASTLINE -FLYLINE -MICROWELD -ADJUSTLINE -TELESERVICE DATA TRANSFER -USB INTERFACE RJ-45 NETWORK PORT SECURITY -CE MARKING -LIGHT BARRIER -MULTI-CHAMBER EXHAUST SYSTEM -COMPACT COLLECTOR -FAIRING WITH MAKROLONSCHEIBEN PROGRAMMING - SIMPLE WORKSHOP PROGRAMMING -ADVANCED WORKSHOP PROGRAMMING ADVANCED MACHINE EQUIPMENT -MACHINE UP TO 43 DEGREES AMBIENT TEMPERATURE -PALLET CHANGER CROSSWISE INCL. SAFETY DEVICE -DETECTLINE: PRECISION SHEET METAL STOCK ACQUISITION -COOLLINE TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-platen filter, make plasma air ag, extra specifications 201 l vertical ss activated carbon air adsorberplaten filtersfilters > platen filters what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLATEN FILTER, MAKE PLASMA AIR AG, EXTRA SPECIFICATIONS 201 L VERTICAL SS ACTIVATED CARBON AIR ADSORBERPLATEN FILTERSFILTERS > PLATEN FILTERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 16.250 €
Ubicación: Land-plasma cutter eckert jantar 2 produced in 2007. the machine is regularly serviced. she worked on one shift.

technical data :
- cnc computer controller: ecs 859
- plasma source: powermax 1650
- size of the working table: 2000 x 6000 mm
- plasma cutting thickness of eckert jantar 2: 12 mm
- oxygen cutting thickness: 60 mm
- power supply: 230 v
- rated current: 12 v  PLASMA CUTTER ECKERT JANTAR 2 PRODUCED IN 2007. THE MACHINE IS REGULARLY SERVICED. SHE WORKED ON ONE SHIFT. TECHNICAL DATA : - CNC COMPUTER CONTROLLER: ECS 859 - PLASMA SOURCE: POWERMAX 1650 - SIZE OF THE WORKING TABLE: 2000 X 6000 MM - PLASMA CUTTING THICKNESS OF ECKERT JANTAR 2: 12 MM - OXYGEN CUTTING THICKNESS: 60 MM - POWER SUPPLY: 230 V - RATED CURRENT: 12 V
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Precio: 5.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-technical data:

working field 4.000 x 2.000 x 115 mm
control siemens sinumerik 840 d
laser power 5,000 watts
maximum sheet thickness mild steel 25 mm
maximum sheet thickness stainless steel 20 mm
maximum sheet thickness alu 12 mm

standard equipment:

-closed machine frame with integrated laser unit
-trumpf laser tlf 5000
-laser unit: co2 laser, high-frequency unit, logbook function angeregt,
-automatic pallet changer and longitudinal conveyor belt
-drives: gantry drive in combination with direct linear drives
-laser power control
-hi-las high pressure cutting
-plasmasensorik pms
-fast processing with sprintlas
-contourlas for making small holes
-cutting gas pressure setting can be programmed
-laser cutting head with 5 "lens
-laser cutting head with 7.5 "-lens"
-cutting head quick change facility
-capacitive height control (slides iii)
-automatic focus position adjustment of autolas plus
-oil spray safe thick sheet metal working
-automatic switch-off
-lighting of workroom
-control sin 840 d: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, tele-service
-shop floor programming lite tops 100
-security: mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilated, monitoring system, multi chamber extraction and compact dust collector, cab
network connection: bnc/rj-45 network connection by installing via tele-service
-electrical equipment for three-phase 400 v / 50 hz
-colour: white structure lacquer ral 9002 / gentian blue ral 5010

advanced features:

-additional laser cutting head with a 3.75-inch lens
-additional laser cutting head with 9-inch lens
-process control system (pcs)

! machine rebuilt - incl. new turbine (lsm)!

(errors and omissions in the technical data, information and prices and subject to prior sale!) 


 TECHNICAL DATA: WORKING FIELD 4.000 X 2.000 X 115 MM CONTROL SIEMENS SINUMERIK 840 D LASER POWER 5,000 WATTS MAXIMUM SHEET THICKNESS MILD STEEL 25 MM MAXIMUM SHEET THICKNESS STAINLESS STEEL 20 MM MAXIMUM SHEET THICKNESS ALU 12 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -TRUMPF LASER TLF 5000 -LASER UNIT: CO2 LASER, HIGH-FREQUENCY UNIT, LOGBOOK FUNCTION ANGEREGT, -AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR BELT -DRIVES: GANTRY DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES -LASER POWER CONTROL -HI-LAS HIGH PRESSURE CUTTING -PLASMASENSORIK PMS -FAST PROCESSING WITH SPRINTLAS -CONTOURLAS FOR MAKING SMALL HOLES -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -LASER CUTTING HEAD WITH 5 "LENS -LASER CUTTING HEAD WITH 7.5 "-LENS" -CUTTING HEAD QUICK CHANGE FACILITY -CAPACITIVE HEIGHT CONTROL (SLIDES III) -AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS -OIL SPRAY SAFE THICK SHEET METAL WORKING -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SIN 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE -SHOP FLOOR PROGRAMMING LITE TOPS 100 -SECURITY: MEHRSTRAHLIGE PHOTOELECTRIC BEAM GUIDANCE IS FULLY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB NETWORK CONNECTION: BNC/RJ-45 NETWORK CONNECTION BY INSTALLING VIA TELE-SERVICE -ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ -COLOUR: WHITE STRUCTURE LACQUER RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: -ADDITIONAL LASER CUTTING HEAD WITH A 3.75-INCH LENS -ADDITIONAL LASER CUTTING HEAD WITH 9-INCH LENS -PROCESS CONTROL SYSTEM (PCS) ! MACHINE REBUILT - INCL. NEW TURBINE (LSM)! (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Precio: 38.800 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 700 €
Ubicación: Land-narrow band press for abrasive hydraulic knuckle-joint glue press,.
380 volts 50 hz.
foot operated NARROW BAND PRESS FOR ABRASIVE HYDRAULIC KNUCKLE-JOINT GLUE PRESS,. 380 VOLTS 50 HZ. FOOT OPERATED
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-this lot is part of the online auction agricultural machinery dutch growers in america (nl). the online auction start on friday 07 december 2018 and closes on tuesday 18 december 2018. please, mention the following number when contacting bva auctions: 36695-28. no rights can be derived from the text of this publication. THIS LOT IS PART OF THE ONLINE AUCTION AGRICULTURAL MACHINERY DUTCH GROWERS IN AMERICA (NL). THE ONLINE AUCTION START ON FRIDAY 07 DECEMBER 2018 AND CLOSES ON TUESDAY 18 DECEMBER 2018. PLEASE, MENTION THE FOLLOWING NUMBER WHEN CONTACTING BVA AUCTIONS: 36695-28. NO RIGHTS CAN BE DERIVED FROM THE TEXT OF THIS PUBLICATION.
Vendedor: BVA Auctions
Año de construcción: usado
Ubicación: Land-mazak laser cutting system stx510 mkiii 2.5kw year: 2011
very well preserved, reconditioned mazak laser machines with 2500w
panel sizes: 3000 mm x 1500 mm
minimal footprint by 2, 9 m x 7, 3 m
small part conveyor
lan/usb connection
automatic nozzle change
automatic focus position adjustment
fast in cutting thick materials
plasma sensor for stainless steel cutting
piercing sensor to the piercing
burning sensor for monitoring when cutting mild steel
completely encapsulated engine cover no foundation needed
fe: up to 20mm
va: up to 10mm
almg: up to 8mm
plastic can
incl. software
including warranty
incl. extraction system
incl. commissioning + training

= optional with automatic loading and unloading.
 MAZAK LASER CUTTING SYSTEM STX510 MKIII 2.5KW YEAR: 2011 VERY WELL PRESERVED, RECONDITIONED MAZAK LASER MACHINES WITH 2500W PANEL SIZES: 3000 MM X 1500 MM MINIMAL FOOTPRINT BY 2, 9 M X 7, 3 M SMALL PART CONVEYOR LAN/USB CONNECTION AUTOMATIC NOZZLE CHANGE AUTOMATIC FOCUS POSITION ADJUSTMENT FAST IN CUTTING THICK MATERIALS PLASMA SENSOR FOR STAINLESS STEEL CUTTING PIERCING SENSOR TO THE PIERCING BURNING SENSOR FOR MONITORING WHEN CUTTING MILD STEEL COMPLETELY ENCAPSULATED ENGINE COVER NO FOUNDATION NEEDED FE: UP TO 20MM VA: UP TO 10MM ALMG: UP TO 8MM PLASTIC CAN INCL. SOFTWARE INCLUDING WARRANTY INCL. EXTRACTION SYSTEM INCL. COMMISSIONING + TRAINING = OPTIONAL WITH AUTOMATIC LOADING AND UNLOADING.
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-this lot is part of the online auction agricultural machinery dutch growers in america (nl). the online auction start on friday 07 december 2018 and closes on tuesday 18 december 2018. please, mention the following number when contacting bva auctions: 36695-27. no rights can be derived from the text of this publication. THIS LOT IS PART OF THE ONLINE AUCTION AGRICULTURAL MACHINERY DUTCH GROWERS IN AMERICA (NL). THE ONLINE AUCTION START ON FRIDAY 07 DECEMBER 2018 AND CLOSES ON TUESDAY 18 DECEMBER 2018. PLEASE, MENTION THE FOLLOWING NUMBER WHEN CONTACTING BVA AUCTIONS: 36695-27. NO RIGHTS CAN BE DERIVED FROM THE TEXT OF THIS PUBLICATION.
Vendedor: BVA Auctions
Año de construcción: usado
Ubicación: Land-cnc portal plasma cutting machine
manufacturer: knife
type: omnimat l 4000
year of construction: 2008
cnc control: global control

track width: 4.000 mm
1 x power source hypertherm hpr260 plasma torch
5 x oxy-fuel burner alfa

vacuum table and filter system on request
 CNC PORTAL PLASMA CUTTING MACHINE MANUFACTURER: KNIFE TYPE: OMNIMAT L 4000 YEAR OF CONSTRUCTION: 2008 CNC CONTROL: GLOBAL CONTROL TRACK WIDTH: 4.000 MM 1 X POWER SOURCE HYPERTHERM HPR260 PLASMA TORCH 5 X OXY-FUEL BURNER ALFA VACUUM TABLE AND FILTER SYSTEM ON REQUEST
Vendedor: METEC GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1719</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030 fiber (l41)</td> </tr> <tr> <td>year:</td> <td>2012</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>27.511h / 10.499h / 5.202h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>20 mm</td> </tr> <tr> <td>max. speed:</td> <td>235 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,10  mm</td> </tr> <tr> <td>length:</td> <td>8300 mm</td> </tr> <tr> <td>width:</td> <td>4800 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n \n<strong>standard configuration</strong> </h3>\n \n<strong>machine</strong>\n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>torque drive in combination with direct linear drives</li>\n	<li>enclosed beam delivery via fiber optic cable</li>\n	<li>chiller for machine cooling (water-air)</li>\n	<li>integrated eletrical cabinets with inside light</li>\n	<li>automatic pallet changer lengthwise installation</li>\n	<li>wide longitudinal conveyor</li>\n	<li>power supply trudisk via the machine</li>\n	<li>working area lighting</li>\n	<li>positioning laser diode</li>\n	<li>spray device</li>\n	<li>pierceline</li>\n	<li>focusline</li>\n	<li>nitroline</li>\n	<li>plasmaline</li>\n	<li>automatic nozzle cleaning</li>\n</ul>\n \n<strong>trumpf laser </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>solid state laser trudisk 5001 with 1 fllk output </li>\n	<li>fiber optic cable according standard layout</li>\n	<li>laser chiller unit (water-air)</li>\n	<li>stimulation via pump diodes</li>\n	<li>laser power control</li>\n	<li>logbook function laser</li>\n</ul>\n \n<strong>cutting head</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>universal cutting head with complete adaptive lense system</li>\n	<li>protection glass to avoid lense contamination</li>\n	<li>protection glass monitoring</li>\n	<li>controlline: height regulation and sheet edge detection</li>\n</ul>\n \n<strong>control</strong>\n\n	<ul>\n	<li>sinumerik 840d sl</li>\n	<li>17 touch panel</li>\n	<li>easy shop floor programming</li>\n	<li>advanced shop floor programming</li>\n	<li>fast reproduction</li>\n	<li>technology data is integrated</li>\n	<li>automatic shutdown</li>\n	<li>programmable cutting gas pressure</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>adjustline</li>\n	<li>teleservice via internet</li>\n	<li>integrated e-shop</li>\n</ul>\n \n<strong>data transmission</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>rj45 network connection </li>\n	<li>usb interface</li>\n</ul>\n \n<strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>ce label</li>\n	<li>light barriers</li>\n	<li>multi-chamber extraction system </li>\n	<li>integrated compact dust extractor</li>\n	<li>fire detection and alarm system in dust extractor</li>\n	<li>machine enclosure with certificated window (right door)</li>\n	<li>electrical curl up roof</li>\n</ul>\n \n<strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>nozzle changer</li>\n</ul>\n \n<strong>automation</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>preparation loadmaster</li>\n</ul>\n \n<strong> </strong> \n<strong> </strong>

TECHNICAL DATA

ITEM NUMBER: LM-1719
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030 FIBER (L41)
YEAR: 2012
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 27.511H / 10.499H / 5.202H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 20 MM
MAX. SPEED: 235 M/MIN
POSITIONING ACCURACY: 0,10 MM
LENGTH: 8300 MM
WIDTH: 4800 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \N \NSTANDARD CONFIGURATION \N \NMACHINE\N\N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES
  • \N
  • ENCLOSED BEAM DELIVERY VIA FIBER OPTIC CABLE
  • \N
  • CHILLER FOR MACHINE COOLING (WATER-AIR)
  • \N
  • INTEGRATED ELETRICAL CABINETS WITH INSIDE LIGHT
  • \N
  • AUTOMATIC PALLET CHANGER LENGTHWISE INSTALLATION
  • \N
  • WIDE LONGITUDINAL CONVEYOR
  • \N
  • POWER SUPPLY TRUDISK VIA THE MACHINE
  • \N
  • WORKING AREA LIGHTING
  • \N
  • POSITIONING LASER DIODE
  • \N
  • SPRAY DEVICE
  • \N
  • PIERCELINE
  • \N
  • FOCUSLINE
  • \N
  • NITROLINE
  • \N
  • PLASMALINE
  • \N
  • AUTOMATIC NOZZLE CLEANING
  • \N
\N \NTRUMPF LASER \N \N
    \N
  • SOLID STATE LASER TRUDISK 5001 WITH 1 FLLK OUTPUT
  • \N
  • FIBER OPTIC CABLE ACCORDING STANDARD LAYOUT
  • \N
  • LASER CHILLER UNIT (WATER-AIR)
  • \N
  • STIMULATION VIA PUMP DIODES
  • \N
  • LASER POWER CONTROL
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
\N \NCUTTING HEAD\N \N
    \N
  • UNIVERSAL CUTTING HEAD WITH COMPLETE ADAPTIVE LENSE SYSTEM
  • \N
  • PROTECTION GLASS TO AVOID LENSE CONTAMINATION
  • \N
  • PROTECTION GLASS MONITORING
  • \N
  • CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION
  • \N
\N \NCONTROL\N\N
    \N
  • SINUMERIK 840D SL
  • \N
  • 17 TOUCH PANEL
  • \N
  • EASY SHOP FLOOR PROGRAMMING
  • \N
  • ADVANCED SHOP FLOOR PROGRAMMING
  • \N
  • FAST REPRODUCTION
  • \N
  • TECHNOLOGY DATA IS INTEGRATED
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • ADJUSTLINE
  • \N
  • TELESERVICE VIA INTERNET
  • \N
  • INTEGRATED E-SHOP
  • \N
\N \NDATA TRANSMISSION\N \N
    \N
  • RJ45 NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
\N \NSAFETY\N \N
    \N
  • CE LABEL
  • \N
  • LIGHT BARRIERS
  • \N
  • MULTI-CHAMBER EXTRACTION SYSTEM
  • \N
  • INTEGRATED COMPACT DUST EXTRACTOR
  • \N
  • FIRE DETECTION AND ALARM SYSTEM IN DUST EXTRACTOR
  • \N
  • MACHINE ENCLOSURE WITH CERTIFICATED WINDOW (RIGHT DOOR)
  • \N
  • ELECTRICAL CURL UP ROOF
  • \N
\N \NADDITIONAL EQUIPMENT \N \N\N
    \N
  • NOZZLE CHANGER
  • \N
\N \NAUTOMATION \N \N \N
    \N
  • PREPARATION LOADMASTER
  • \N
\N \N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-offer munich no. 987 46 has a hole in the 50 mm grid on the table top 18der table siegmund professional and a parallel arrangement of holes in the 25 mm grid on the seiten.die holes have a diameter of 16 mm, and the table is a material thickness of ca. 11, 5-13 mm. the table top is made of through-hardened steel s355j2 n (st 52/3). after processing, the siegmund table is plasma nitrided and coated. the siegmund table is thus doubly hardened. grid lines at a distance of 50 mm will help you with building your vorrichtung.siegmund welding tables 750 mm are standard with scale and siegmund foot standard equipped. machine type welding and spanntischfabrikatsiegmund typprofessional 750artikel-nr.s0.160020.p750.t1abmessungen2.000 x 1,000 x 850 mm incl. fã¼ã?eoberflã¤chenhã¤rtebis 750 vickersfehlerbeschreibunghelle spots on the oberflã¤chelieferumfangsiegmund welding table professional 750siegmund-fuã?-grundausstattunggewicht354 kgzustandneustandort86845 groã?aitingenlieferzeitca. 3-4 wochenneupreis without errors2. 195, 00 â?¬ mwst.preis cpl. with the zubehã¶r1. 921, 00 â?¬ mwst.versandkosten within germany â?¬219.00 incl. packaging vat. ___die machine is located in derwilhelm merkle welding technology gmbhanton-bach-straã?e 3181249 muenchenansprechpartner is mr siegfried awissus. of course we send the machine to you for 60,-â?¬ per spedition in completely germany. our machine ___sie can also contact with 0% finance! we offer sample welding, instrument instruction, as well as a huge range of accessories.  OFFER MUNICH NO. 987 46 HAS A HOLE IN THE 50 MM GRID ON THE TABLE TOP 18DER TABLE SIEGMUND PROFESSIONAL AND A PARALLEL ARRANGEMENT OF HOLES IN THE 25 MM GRID ON THE SEITEN.DIE HOLES HAVE A DIAMETER OF 16 MM, AND THE TABLE IS A MATERIAL THICKNESS OF CA. 11, 5-13 MM. THE TABLE TOP IS MADE OF THROUGH-HARDENED STEEL S355J2 N (ST 52/3). AFTER PROCESSING, THE SIEGMUND TABLE IS PLASMA NITRIDED AND COATED. THE SIEGMUND TABLE IS THUS DOUBLY HARDENED. GRID LINES AT A DISTANCE OF 50 MM WILL HELP YOU WITH BUILDING YOUR VORRICHTUNG.SIEGMUND WELDING TABLES 750 MM ARE STANDARD WITH SCALE AND SIEGMUND FOOT STANDARD EQUIPPED. MACHINE TYPE WELDING AND SPANNTISCHFABRIKATSIEGMUND TYPPROFESSIONAL 750ARTIKEL-NR.S0.160020.P750.T1ABMESSUNGEN2.000 X 1,000 X 850 MM INCL. F&ATILDE;&FRAC14;&ATILDE;?EOBERFL&ATILDE;&CURREN;CHENH&ATILDE;&CURREN;RTEBIS 750 VICKERSFEHLERBESCHREIBUNGHELLE SPOTS ON THE OBERFL&ATILDE;&CURREN;CHELIEFERUMFANGSIEGMUND WELDING TABLE PROFESSIONAL 750SIEGMUND-FU&ATILDE;?-GRUNDAUSSTATTUNGGEWICHT354 KGZUSTANDNEUSTANDORT86845 GRO&ATILDE;?AITINGENLIEFERZEITCA. 3-4 WOCHENNEUPREIS WITHOUT ERRORS2. 195, 00 &ACIRC;?&NOT; MWST.PREIS CPL. WITH THE ZUBEH&ATILDE;&PARA;R1. 921, 00 &ACIRC;?&NOT; MWST.VERSANDKOSTEN WITHIN GERMANY &ACIRC;?&NOT;219.00 INCL. PACKAGING VAT. ___DIE MACHINE IS LOCATED IN DERWILHELM MERKLE WELDING TECHNOLOGY GMBHANTON-BACH-STRA&ATILDE;?E 3181249 MUENCHENANSPRECHPARTNER IS MR SIEGFRIED AWISSUS. OF COURSE WE SEND THE MACHINE TO YOU FOR 60,-&ACIRC;?&NOT; PER SPEDITION IN COMPLETELY GERMANY. OUR MACHINE ___SIE CAN ALSO CONTACT WITH 0% FINANCE! WE OFFER SAMPLE WELDING, INSTRUMENT INSTRUCTION, AS WELL AS A HUGE RANGE OF ACCESSORIES.
Vendedor: Wilhelm Merkle Schweißtechnik GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1691</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030 fiber (l68)</td> </tr> <tr> <td>year:</td> <td>2015</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>23.119h / 9.912h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>20 mm</td> </tr> <tr> <td>max. speed:</td> <td>265 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,10  mm</td> </tr> <tr> <td>length:</td> <td>8000 mm</td> </tr> <tr> <td>width:</td> <td>4800 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg (grundmaschine)</td> </tr> </tbody> </table> <br> \n \n \n<h3> <strong>standard configuration</strong> </h3>\n \n<strong>machine</strong>\n\n	<ul>\n	<li>closed machine frame </li>\n	<li>integrated cabinet</li>\n	<li>automatic pallet changer lengthwise installation</li>\n	<li>torque drive in combination with direct linear drives</li>\n	<li>enclosed beam delivery via fiber optic cable</li>\n	<li>chiller for machine cooling (water-air)</li>\n	<li>integrated eletrical cabinets with inside light</li>\n	<li>power supply trudisk via the machine</li>\n	<li>longitudinal conveyor</li>\n	<li>working area lighting</li>\n	<li>positioning laser diode</li>\n	<li>spray device</li>\n	<li>pierceline</li>\n	<li>focusline</li>\n	<li>nitroline</li>\n	<li>plasmaline</li>\n	<li>automatic nozzle cleaning</li>\n</ul>\n \n<strong>trumpf laser </strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>solid state laser trudisk 5001 with 1 llk output </li>\n	<li>fiber optic cable according standard layout (laser next to the machine)</li>\n	<li>laser chiller unit (water-air)</li>\n	<li>stimulation via pump diodes</li>\n	<li>laser power control</li>\n</ul>\n \n \n<strong>cutting head</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>universal cutting head with complete adaptive lense system</li>\n	<li>one cutting head strategy</li>\n	<li>protection glass to avoid lense contamination</li>\n	<li>protection glass monitoring</li>\n	<li>controlline: height regulation and sheet edge detection</li>\n</ul>\n \n<strong>control</strong>\n\n	<ul>\n	<li>sinumerik 840d sl</li>\n	<li>19 touch panel</li>\n	<li>easy shop floor programming</li>\n	<li>fast reproduction</li>\n	<li>technology data is integrated</li>\n	<li>automatic shutdown</li>\n	<li>programmable cutting gas pressure</li>\n	<li>contourline</li>\n	<li>microweld</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>adjustline</li>\n	<li>teleservice via internet</li>\n</ul>\n \n<strong>data transmission</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>rj45 network connection </li>\n	<li>usb interface</li>\n</ul>\n \n<strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>ce label</li>\n	<li>light barriers</li>\n	<li>multi-chamber extraction system </li>\n	<li>compact dust extractor</li>\n	<li>machine enclosure with certificated window (right door)</li>\n	<li>electrical curl up roof</li>\n</ul>\n \n<h3> <strong>additional equipment</strong> </h3>\n \n\n	<ul>\n	<li>smart nozzle automation (incl. nozzle changer, automatic nozzle inspection and smart skip)</li>\n	<li>copper cutting package (includes cutting data n2, o2) </li>\n	<li>brass cutting package (includes cutting data n2) </li>\n	<li>brightline fiber </li>\n	<li>coolline</li>\n	<li>detectline: precision sheet position sensing (incl. automatic focus measurement) </li>\n	<li>door window on left side for better insight</li>\n	<li>wide transverse conveyor belt with tilt container (container on the left side of the machine) </li>\n	<li>machine status lamp (incl. mdr interface) </li>\n	<li>integrated video camera (full hd) for process monitoring single picture transmission to network </li>\n	<li>drop & cut </li>\n	<li>co2 extinguishing device for compact dust extractor</li>\n</ul>\n \n</h3> <h3> <strong>installation</strong> </h3>\n \n\n	<ul>\n	<li> <strong> </strong> </h3>platform version machine without steel structure</li>\n</ul>\n \n</h3> <h3> <strong>automation</strong> </h3>\n \n<strong>liftmaster compact</strong>\n<strong> </strong> \n\n	<ul>\n	<li> <strong> </strong> </h3>basic configuration incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake(distance between the prongs 67 mm, changeable prongs) incl. raw material unpacking station, loading station, stack height up to 90 mm / 3 t, finished parts pallet and extended pallet pull-out on the machine</li>\n	<li>thin sheet separation for synchronous loader (s = 0,8 - 2,0 mm)</li>\n	<li>scratch-free, accurate unloading (incl. stainless steel rakes with belt prongs, distance between prongs 67 mm up to s = 15 mm)</li>\n</ul>\n \n<strong>partmaster integration trustore incl. partmaster</strong>\n<strong> </strong> \n<strong>trustore 3030</strong>\n</h3> \nbasic module storage tower for max. 12 shelves\nmax. sheet format: 3048 x 1524 mm\nmax. loading height per pallet: 90 / 170 mm\nmax. loading weight per pallet: 3 t\nsystem height:5550 mm\n \n\n	<ul>\n	<li>start post</li>\n	<li>store safety device</li>\n	<li>column covering</li>\n	<li>fork lift capable floor pallet for raw material</li>\n</ul>\n \n</h3> \n</h3>rack server </h3>\n\n	<ul>\n	<li>control panel</li>\n	<li>store safety device</li>\n	<li>store interface</li>\n	<li>switch cabinet lighting</li>\n	<li>teleservice via internet</li>\n	<li>lifting chain, e-chain</li>\n	<li>lifting speed 12 m/min</li>\n	<li>pull-out speed 30 m/min</li>\n	<li>lift acceleration 0,5 m/s²</li>\n</ul>\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1691
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030 FIBER (L68)
YEAR: 2015
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 23.119H / 9.912H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 20 MM
MAX. SPEED: 265 M/MIN
POSITIONING ACCURACY: 0,10 MM
LENGTH: 8000 MM
WIDTH: 4800 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG (GRUNDMASCHINE)

\N \N \N

STANDARD CONFIGURATION

\N \NMACHINE\N\N
    \N
  • CLOSED MACHINE FRAME
  • \N
  • INTEGRATED CABINET
  • \N
  • AUTOMATIC PALLET CHANGER LENGTHWISE INSTALLATION
  • \N
  • TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES
  • \N
  • ENCLOSED BEAM DELIVERY VIA FIBER OPTIC CABLE
  • \N
  • CHILLER FOR MACHINE COOLING (WATER-AIR)
  • \N
  • INTEGRATED ELETRICAL CABINETS WITH INSIDE LIGHT
  • \N
  • POWER SUPPLY TRUDISK VIA THE MACHINE
  • \N
  • LONGITUDINAL CONVEYOR
  • \N
  • WORKING AREA LIGHTING
  • \N
  • POSITIONING LASER DIODE
  • \N
  • SPRAY DEVICE
  • \N
  • PIERCELINE
  • \N
  • FOCUSLINE
  • \N
  • NITROLINE
  • \N
  • PLASMALINE
  • \N
  • AUTOMATIC NOZZLE CLEANING
  • \N
\N \NTRUMPF LASER \N \N
    \N
  • SOLID STATE LASER TRUDISK 5001 WITH 1 LLK OUTPUT
  • \N
  • FIBER OPTIC CABLE ACCORDING STANDARD LAYOUT (LASER NEXT TO THE MACHINE)
  • \N
  • LASER CHILLER UNIT (WATER-AIR)
  • \N
  • STIMULATION VIA PUMP DIODES
  • \N
  • LASER POWER CONTROL
  • \N
\N \N \NCUTTING HEAD\N \N
    \N
  • UNIVERSAL CUTTING HEAD WITH COMPLETE ADAPTIVE LENSE SYSTEM
  • \N
  • ONE CUTTING HEAD STRATEGY
  • \N
  • PROTECTION GLASS TO AVOID LENSE CONTAMINATION
  • \N
  • PROTECTION GLASS MONITORING
  • \N
  • CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION
  • \N
\N \NCONTROL\N\N
    \N
  • SINUMERIK 840D SL
  • \N
  • 19 TOUCH PANEL
  • \N
  • EASY SHOP FLOOR PROGRAMMING
  • \N
  • FAST REPRODUCTION
  • \N
  • TECHNOLOGY DATA IS INTEGRATED
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE
  • \N
  • CONTOURLINE
  • \N
  • MICROWELD
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • ADJUSTLINE
  • \N
  • TELESERVICE VIA INTERNET
  • \N
\N \NDATA TRANSMISSION\N \N
    \N
  • RJ45 NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
\N \NSAFETY\N \N
    \N
  • CE LABEL
  • \N
  • LIGHT BARRIERS
  • \N
  • MULTI-CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MACHINE ENCLOSURE WITH CERTIFICATED WINDOW (RIGHT DOOR)
  • \N
  • ELECTRICAL CURL UP ROOF
  • \N
\N \N

ADDITIONAL EQUIPMENT

\N \N\N
    \N
  • SMART NOZZLE AUTOMATION (INCL. NOZZLE CHANGER, AUTOMATIC NOZZLE INSPECTION AND SMART SKIP)
  • \N
  • COPPER CUTTING PACKAGE (INCLUDES CUTTING DATA N2, O2)
  • \N
  • BRASS CUTTING PACKAGE (INCLUDES CUTTING DATA N2)
  • \N
  • BRIGHTLINE FIBER
  • \N
  • COOLLINE
  • \N
  • DETECTLINE: PRECISION SHEET POSITION SENSING (INCL. AUTOMATIC FOCUS MEASUREMENT)
  • \N
  • DOOR WINDOW ON LEFT SIDE FOR BETTER INSIGHT
  • \N
  • WIDE TRANSVERSE CONVEYOR BELT WITH TILT CONTAINER (CONTAINER ON THE LEFT SIDE OF THE MACHINE)
  • \N
  • MACHINE STATUS LAMP (INCL. MDR INTERFACE)
  • \N
  • INTEGRATED VIDEO CAMERA (FULL HD) FOR PROCESS MONITORING SINGLE PICTURE TRANSMISSION TO NETWORK
  • \N
  • DROP & CUT
  • \N
  • CO2 EXTINGUISHING DEVICE FOR COMPACT DUST EXTRACTOR
  • \N
\N \N

INSTALLATION

\N \N\N
    \N
  • PLATFORM VERSION MACHINE WITHOUT STEEL STRUCTURE
  • \N
\N \N

AUTOMATION

\N \NLIFTMASTER COMPACT\N \N\N
    \N
  • BASIC CONFIGURATION INCL. SYNCHRONOUS LOADER, PEELING DEVICE, MEASURING DEVICE FOR THICK SHEETS, MOVABLE UNLOADING RAKE(DISTANCE BETWEEN THE PRONGS 67 MM, CHANGEABLE PRONGS) INCL. RAW MATERIAL UNPACKING STATION, LOADING STATION, STACK HEIGHT UP TO 90 MM / 3 T, FINISHED PARTS PALLET AND EXTENDED PALLET PULL-OUT ON THE MACHINE
  • \N
  • THIN SHEET SEPARATION FOR SYNCHRONOUS LOADER (S = 0,8 - 2,0 MM)
  • \N
  • SCRATCH-FREE, ACCURATE UNLOADING (INCL. STAINLESS STEEL RAKES WITH BELT PRONGS, DISTANCE BETWEEN PRONGS 67 MM UP TO S = 15 MM)
  • \N
\N \NPARTMASTER INTEGRATION TRUSTORE INCL. PARTMASTER\N \NTRUSTORE 3030\N \NBASIC MODULE STORAGE TOWER FOR MAX. 12 SHELVES\NMAX. SHEET FORMAT: 3048 X 1524 MM\NMAX. LOADING HEIGHT PER PALLET: 90 / 170 MM\NMAX. LOADING WEIGHT PER PALLET: 3 T\NSYSTEM HEIGHT:5550 MM\N \N\N
    \N
  • START POST
  • \N
  • STORE SAFETY DEVICE
  • \N
  • COLUMN COVERING
  • \N
  • FORK LIFT CAPABLE FLOOR PALLET FOR RAW MATERIAL
  • \N
\N \N \NRACK SERVER \N\N
    \N
  • CONTROL PANEL
  • \N
  • STORE SAFETY DEVICE
  • \N
  • STORE INTERFACE
  • \N
  • SWITCH CABINET LIGHTING
  • \N
  • TELESERVICE VIA INTERNET
  • \N
  • LIFTING CHAIN, E-CHAIN
  • \N
  • LIFTING SPEED 12 M/MIN
  • \N
  • PULL-OUT SPEED 30 M/MIN
  • \N
  • LIFT ACCELERATION 0,5 M/S²
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-technical data:

work area: 2,500 x 1,250 x 115 mm control: siemens sinumerik 840 d laser power: 3,200 watts maximum sheet thickness structural steel: 20 mm maximum thickness stainless steel: 12 mm maximum thickness aluminium: 8 mm standard:

â?¢ closed machine frame with integrated laser unit
â?¢ trumpf-laser tlf 2000
â?¢ laser unit: co2 laser, high-frequency unit, logbook function angeregt,
â?¢ automatic pallet changer and longitudinal conveyor belt
â?¢ drives: maintenance-free ac servo motors
â?¢ laser power control
â?¢ hi-las high pressure cutting
â?¢ plasmasensorik pms
â?¢ fast processing with sprintlas
â?¢ contourlas for making small holes
â?¢ programmable cutting gas pressure setting
â?¢ laser cutting head with 5 "lens
â?¢ cutting head quick change facility
â?¢ capacitive height control (slides iii)
â?¢ position laser diode
â?¢ automatic focus position adjustment of autolas plus
â?¢ automatic switch-off
â?¢ lighting of workroom
â?¢ control sin 840 d: open control on pc-based, easy to use, online help, diagnostics, maintenance logbook, technology data, tele-service
â?¢ shop floor programming lite tops 100
â?¢ security: mehrstrahlige photoelectric beam guidance is fully encapsulated and ventilated, monitoring system, multi chamber extraction and compact dust collector, cab
â?¢ network connection: bnc/rj-45 network connection by installing via tele-service
â?¢ electrical equipment for three-phase 400 v / 50 hz
â?¢ finish: textured varnish white ral 9002 / gentian blue ral 5010

advanced features:

â?¢ high-power lasers tlf 3200 / 3.2 kw
â?¢ additional laser cutting head with 7.5 "lens
â?¢ automatic pallet changer

! resonator with lsm-turbine (magnetic bearing)!

(errors and omissions in the technical data, information and prices and subject to prior sale!) 



 TECHNICAL DATA: WORK AREA: 2,500 X 1,250 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS STRUCTURAL STEEL: 20 MM MAXIMUM THICKNESS STAINLESS STEEL: 12 MM MAXIMUM THICKNESS ALUMINIUM: 8 MM STANDARD: &ACIRC;?&CENT; CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT &ACIRC;?&CENT; TRUMPF-LASER TLF 2000 &ACIRC;?&CENT; LASER UNIT: CO2 LASER, HIGH-FREQUENCY UNIT, LOGBOOK FUNCTION ANGEREGT, &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR BELT &ACIRC;?&CENT; DRIVES: MAINTENANCE-FREE AC SERVO MOTORS &ACIRC;?&CENT; LASER POWER CONTROL &ACIRC;?&CENT; HI-LAS HIGH PRESSURE CUTTING &ACIRC;?&CENT; PLASMASENSORIK PMS &ACIRC;?&CENT; FAST PROCESSING WITH SPRINTLAS &ACIRC;?&CENT; CONTOURLAS FOR MAKING SMALL HOLES &ACIRC;?&CENT; PROGRAMMABLE CUTTING GAS PRESSURE SETTING &ACIRC;?&CENT; LASER CUTTING HEAD WITH 5 "LENS &ACIRC;?&CENT; CUTTING HEAD QUICK CHANGE FACILITY &ACIRC;?&CENT; CAPACITIVE HEIGHT CONTROL (SLIDES III) &ACIRC;?&CENT; POSITION LASER DIODE &ACIRC;?&CENT; AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS &ACIRC;?&CENT; AUTOMATIC SWITCH-OFF &ACIRC;?&CENT; LIGHTING OF WORKROOM &ACIRC;?&CENT; CONTROL SIN 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE &ACIRC;?&CENT; SHOP FLOOR PROGRAMMING LITE TOPS 100 &ACIRC;?&CENT; SECURITY: MEHRSTRAHLIGE PHOTOELECTRIC BEAM GUIDANCE IS FULLY ENCAPSULATED AND VENTILATED, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB &ACIRC;?&CENT; NETWORK CONNECTION: BNC/RJ-45 NETWORK CONNECTION BY INSTALLING VIA TELE-SERVICE &ACIRC;?&CENT; ELECTRICAL EQUIPMENT FOR THREE-PHASE 400 V / 50 HZ &ACIRC;?&CENT; FINISH: TEXTURED VARNISH WHITE RAL 9002 / GENTIAN BLUE RAL 5010 ADVANCED FEATURES: &ACIRC;?&CENT; HIGH-POWER LASERS TLF 3200 / 3.2 KW &ACIRC;?&CENT; ADDITIONAL LASER CUTTING HEAD WITH 7.5 "LENS &ACIRC;?&CENT; AUTOMATIC PALLET CHANGER ! RESONATOR WITH LSM-TURBINE (MAGNETIC BEARING)! (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1715</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser l 3030 (l20)</td> </tr> <tr> <td>year:</td> <td>2011</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>33.178h / 16.550h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>140 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2200 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3> <strong>machine</strong>\n<strong> </strong>· closed machine frame with integrated laser unit\n· motion unit for high precision processing\n· torque drive in combination with direct linear drives\n· enclosed beam delivery system\n· one cutting head strategy\n· chiller\n· automatic pallet changer, lengthwise installation\n· longitudinal conveyor\n· ergonomic control panel with touchscreen\n· working area lighting\n· positioning laser diode\n· spray device\n· pierceline\n· focusline\n· nitroline\n· plasmaline\n \n<strong>trumpf laser</strong>\n<strong> </strong>· co2-laser truflow 5000 with optimized standby and beam tube purge with n2 \n· maintenance-free radial turbine blower\n· radio-frequency excitation\n· gas mixer (integrated)\n· laser control tasc 3\n· laser power control\n· logbook function laser\n \n<strong>laser cutting head</strong>\n<strong> </strong>· laser cutting head with 250 mm lens\n· universal quick-change device (uti) incl. bus connection\n· lensline \n· controlline: height regulation and sheet edge detection\n \n<strong>control</strong>\n<strong> </strong>· sinumerik 840d sl control\n· colour touchscreen 17\n· extended shopfloor programming\n· fast postproduction\n· automatic shutdown\n· contourline\n· fastline\n· flyline\n· microweld\n· production plan\n· adjustline\n \n· teleservice via internet\n \n<strong>data transfer</strong>\n<strong> </strong>· usb interface\n· rj-45 network connection\n \n<strong>safety</strong>\n<strong> </strong>· ce marking\n· light barriers\n· multi-chamber extraction system \n· compact dust extractor\n· machine enclosure consisting of macrolon panels\n \n<strong> </strong> </h3> <strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>· additional laser cutting head with 115 mm lens\n· nozzle changer\n· warehouse interface\n \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1715
MANUFACTURER: TRUMPF
TYPE: TRULASER L 3030 (L20)
YEAR: 2011
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 3200 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 33.178H / 16.550H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 12 MM
MAX. SHEET THICK./AI: 8 MM
MAX. SPEED: 140 M/MIN
POSITIONING ACCURACY: 0,1 MM
LENGTH: 9300 MM
WIDTH: 4600 MM
HEIGHT: 2200 MM
WEIGHT: 12000 KG

\N \N \NSTANDARD CONFIGURATION \N \N MACHINE\N · CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT\N· MOTION UNIT FOR HIGH PRECISION PROCESSING\N· TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES\N· ENCLOSED BEAM DELIVERY SYSTEM\N· ONE CUTTING HEAD STRATEGY\N· CHILLER\N· AUTOMATIC PALLET CHANGER, LENGTHWISE INSTALLATION\N· LONGITUDINAL CONVEYOR\N· ERGONOMIC CONTROL PANEL WITH TOUCHSCREEN\N· WORKING AREA LIGHTING\N· POSITIONING LASER DIODE\N· SPRAY DEVICE\N· PIERCELINE\N· FOCUSLINE\N· NITROLINE\N· PLASMALINE\N \NTRUMPF LASER\N · CO2-LASER TRUFLOW 5000 WITH OPTIMIZED STANDBY AND BEAM TUBE PURGE WITH N2 \N· MAINTENANCE-FREE RADIAL TURBINE BLOWER\N· RADIO-FREQUENCY EXCITATION\N· GAS MIXER (INTEGRATED)\N· LASER CONTROL TASC 3\N· LASER POWER CONTROL\N· LOGBOOK FUNCTION LASER\N \NLASER CUTTING HEAD\N · LASER CUTTING HEAD WITH 250 MM LENS\N· UNIVERSAL QUICK-CHANGE DEVICE (UTI) INCL. BUS CONNECTION\N· LENSLINE \N· CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION\N \NCONTROL\N · SINUMERIK 840D SL CONTROL\N· COLOUR TOUCHSCREEN 17\N· EXTENDED SHOPFLOOR PROGRAMMING\N· FAST POSTPRODUCTION\N· AUTOMATIC SHUTDOWN\N· CONTOURLINE\N· FASTLINE\N· FLYLINE\N· MICROWELD\N· PRODUCTION PLAN\N· ADJUSTLINE\N \N· TELESERVICE VIA INTERNET\N \NDATA TRANSFER\N · USB INTERFACE\N· RJ-45 NETWORK CONNECTION\N \NSAFETY\N · CE MARKING\N· LIGHT BARRIERS\N· MULTI-CHAMBER EXTRACTION SYSTEM \N· COMPACT DUST EXTRACTOR\N· MACHINE ENCLOSURE CONSISTING OF MACROLON PANELS\N \N ADDITIONAL EQUIPMENT \N \N · ADDITIONAL LASER CUTTING HEAD WITH 115 MM LENS\N· NOZZLE CHANGER\N· WAREHOUSE INTERFACE\N \N \N \N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-working width mm 1.500
working length mm 3,000
opening in mm 250

total weight of the plant in 2,800 kg

repeat accuracy in mm +/-0.05
position accuracy in mm +/-0.1 cutting performance of hifokus 0-38 mm
cutting performance hyper term hpr 130 xd 0-38 mm

torch distance 0-200 mm speed max 35 m / min working height of 900 mm need 6 bar compressed air equipment the machine
hypertherm hpr 130xd plasma source automatic height control esa 505 s control metalix soft with automatic nesting hypertherm manual gas console automatic height control of ac servo motor-driven gearbox automatic opening of the suction zone on the table
mains voltage 400 v / 50 hz  WORKING WIDTH MM 1.500 WORKING LENGTH MM 3,000 OPENING IN MM 250 TOTAL WEIGHT OF THE PLANT IN 2,800 KG REPEAT ACCURACY IN MM +/-0.05 POSITION ACCURACY IN MM +/-0.1 CUTTING PERFORMANCE OF HIFOKUS 0-38 MM CUTTING PERFORMANCE HYPER TERM HPR 130 XD 0-38 MM TORCH DISTANCE 0-200 MM SPEED MAX 35 M / MIN WORKING HEIGHT OF 900 MM NEED 6 BAR COMPRESSED AIR EQUIPMENT THE MACHINE HYPERTHERM HPR 130XD PLASMA SOURCE AUTOMATIC HEIGHT CONTROL ESA 505 S CONTROL METALIX SOFT WITH AUTOMATIC NESTING HYPERTHERM MANUAL GAS CONSOLE AUTOMATIC HEIGHT CONTROL OF AC SERVO MOTOR-DRIVEN GEARBOX AUTOMATIC OPENING OF THE SUCTION ZONE ON THE TABLE MAINS VOLTAGE 400 V / 50 HZ
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1717</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115  mm</td> </tr> <tr> <td>laser rated output:</td> <td>6000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840d</td> </tr> <tr> <td>working hour:</td> <td>24.945 h/8.630 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>15 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>11100 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n<strong>standard configuration</strong> </h3>\n \n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>driving device for a high-precision machining</li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyer</li>\n	<li>drives: gantry drive in combination with linear direct drive</li>\n	<li>encapsulated beam guideway</li>\n	<li>new: one-cutting-head-strategy</li>\n	<li>nitroline</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>focusline</li>\n	<li>plasmaline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n	<li>lensline</li>\n	<li>microweld</li>\n	<li>oil spray device</li>\n	<li>positioning laser diode</li>\n	<li>programmable cutting gas selection/pressure setting</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>trutops laser lite</li>\n	<li>tft colour screen</li>\n	<li>shop floor programming</li>\n</ul>\n \n<strong>trumpf laser</strong>\n \n\n	<ul>\n	<li>co2-laser truflow 6000</li>\n	<li>maintenance-free radial turbo blowers</li>\n	<li>high frequency excitement</li>\n	<li>laser control tasc 3</li>\n	<li>laser power control</li>\n	<li>logbook function laser</li>\n	<li>cooling unit</li>\n</ul>\n \n<strong>laser cutting head</strong>\n \n\n	<ul>\n	<li>laser cutting head with 250mm lens</li>\n	<li>laser cutting head quick change device (uti)</li>\n	<li>controlline</li>\n	<li>pierceline</li>\n</ul>\n \n<strong>control</strong>\n \n\n	<ul>\n	<li>control siemens sinumerik 840d</li>\n	<li>simple operation</li>\n	<li>integrated technology data</li>\n	<li>online-help</li>\n	<li>integrated e-shop</li>\n	<li>diagnostic functions</li>\n	<li>teleservice</li>\n</ul>\n \n<strong>data transfer</strong>\n \n\n	<ul>\n	<li>rj45 network connection and 3,5 disc drive</li>\n	<li>network connection</li>\n	<li>usb interface</li>\n</ul>\n \n<strong> </strong> </h3> <strong>security</strong>\n \n\n	<ul>\n	<li>ce-marking</li>\n	<li>light barriers</li>\n	<li>laser monitoring system</li>\n	<li>multi chamber extraction system</li>\n	<li>compact dust extractor</li>\n	<li>makrolon machine covering </li>\n</ul>\n \n<strong>additional equipment </strong> </h3>\n \n\n	<ul>\n	<li>nozzle changer</li>\n	<li>platform installation (without steel structure)</li>\n</ul>\n \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1717
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030
YEAR: 2008
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 6000 WATT
CONTROL: SIEMENS SINUMERIK 840D
WORKING HOUR: 24.945 H/8.630 H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 15 MM
MAX. SPEED: 200 / 300 M/MIN
POSITIONING ACCURACY: 0,1 MM
LENGTH: 11100 MM
WIDTH: 4600 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \NSTANDARD CONFIGURATION \N \N\N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • DRIVING DEVICE FOR A HIGH-PRECISION MACHINING
  • \N
  • AUTOMATIC PALLET CHANGER
  • \N
  • LONGITUDINAL CONVEYER
  • \N
  • DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVE
  • \N
  • ENCAPSULATED BEAM GUIDEWAY
  • \N
  • NEW: ONE-CUTTING-HEAD-STRATEGY
  • \N
  • NITROLINE
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • FOCUSLINE
  • \N
  • PLASMALINE
  • \N
  • SPRINTLINE
  • \N
  • CONTOURLINE
  • \N
  • LENSLINE
  • \N
  • MICROWELD
  • \N
  • OIL SPRAY DEVICE
  • \N
  • POSITIONING LASER DIODE
  • \N
  • PROGRAMMABLE CUTTING GAS SELECTION/PRESSURE SETTING
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • TRUTOPS LASER LITE
  • \N
  • TFT COLOUR SCREEN
  • \N
  • SHOP FLOOR PROGRAMMING
  • \N
\N \NTRUMPF LASER\N \N\N
    \N
  • CO2-LASER TRUFLOW 6000
  • \N
  • MAINTENANCE-FREE RADIAL TURBO BLOWERS
  • \N
  • HIGH FREQUENCY EXCITEMENT
  • \N
  • LASER CONTROL TASC 3
  • \N
  • LASER POWER CONTROL
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
  • COOLING UNIT
  • \N
\N \NLASER CUTTING HEAD\N \N\N
    \N
  • LASER CUTTING HEAD WITH 250MM LENS
  • \N
  • LASER CUTTING HEAD QUICK CHANGE DEVICE (UTI)
  • \N
  • CONTROLLINE
  • \N
  • PIERCELINE
  • \N
\N \NCONTROL\N \N\N
    \N
  • CONTROL SIEMENS SINUMERIK 840D
  • \N
  • SIMPLE OPERATION
  • \N
  • INTEGRATED TECHNOLOGY DATA
  • \N
  • ONLINE-HELP
  • \N
  • INTEGRATED E-SHOP
  • \N
  • DIAGNOSTIC FUNCTIONS
  • \N
  • TELESERVICE
  • \N
\N \NDATA TRANSFER\N \N\N
    \N
  • RJ45 NETWORK CONNECTION AND 3,5 DISC DRIVE
  • \N
  • NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
\N \N SECURITY\N \N\N
    \N
  • CE-MARKING
  • \N
  • LIGHT BARRIERS
  • \N
  • LASER MONITORING SYSTEM
  • \N
  • MULTI CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MAKROLON MACHINE COVERING
  • \N
\N \NADDITIONAL EQUIPMENT \N \N\N
    \N
  • NOZZLE CHANGER
  • \N
  • PLATFORM INSTALLATION (WITHOUT STEEL STRUCTURE)
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 10 €
Ubicación: Land-range high shelves, jungheinrich, about 9,500 locations, approx. 725 kg / pallet, frame height 9, 10 m or approximately 4, 50 m - used -:
 
price from site: â?¬99.500.-(net), dismantled and loaded!
 
price on request at its own disassembly!
 
price for larger subsets on request!
 
manufacturer: jungheinrich
type: shelving rack
year of construction: 2000
type: t
top: 1st edition: 1,800 mm
other professional heights: 4 x 1,800 mm
top supreme edition: 9 m
traverse length: 3, 60 m or inner box width
and 1, 80 m
profile: 120-30
load capacity: 2.900 kg, at 4 pallets per level = 725kg / pallet
maximum bay load: 14.150 kg
shelf height: 9,100 mm
frame depth: 1, 05 m
frame width: 10 cm
frame braces: welded
a level almost universally designed with chipboard
frames are "found" at about 4, 70 m! i.e. the frames are not consistently approx. 9m high - could be high made of a frame per 2 frame a ca. 4, 70 m and 4. 40 m, then the maximum pitch number even about 1,200 spaces would rise!
quantity: approx.
frame about 444 units in depth 1, 05 m
frame approx. 20 pieces at depth 0, 94m (the narrower frames are available at the place of delivery, get past the bars to the frame so the frames are narrow here)
200 traverses a 1, 80m
3,950 traverses a 3, 60m
200 "truss delivery" a 3, 60 m
note: 25% are about broken frames! where the defects to the part can simply be repaired.
 
on request, the passing places (pallet station) are with! RANGE HIGH SHELVES, JUNGHEINRICH, ABOUT 9,500 LOCATIONS, APPROX. 725 KG / PALLET, FRAME HEIGHT 9, 10 M OR APPROXIMATELY 4, 50 M - USED -: PRICE FROM SITE: &ACIRC;?&NOT;99.500.-(NET), DISMANTLED AND LOADED! PRICE ON REQUEST AT ITS OWN DISASSEMBLY! PRICE FOR LARGER SUBSETS ON REQUEST! MANUFACTURER: JUNGHEINRICH TYPE: SHELVING RACK YEAR OF CONSTRUCTION: 2000 TYPE: T TOP: 1ST EDITION: 1,800 MM OTHER PROFESSIONAL HEIGHTS: 4 X 1,800 MM TOP SUPREME EDITION: 9 M TRAVERSE LENGTH: 3, 60 M OR INNER BOX WIDTH AND 1, 80 M PROFILE: 120-30 LOAD CAPACITY: 2.900 KG, AT 4 PALLETS PER LEVEL = 725KG / PALLET MAXIMUM BAY LOAD: 14.150 KG SHELF HEIGHT: 9,100 MM FRAME DEPTH: 1, 05 M FRAME WIDTH: 10 CM FRAME BRACES: WELDED A LEVEL ALMOST UNIVERSALLY DESIGNED WITH CHIPBOARD FRAMES ARE "FOUND" AT ABOUT 4, 70 M! I.E. THE FRAMES ARE NOT CONSISTENTLY APPROX. 9M HIGH - COULD BE HIGH MADE OF A FRAME PER 2 FRAME A CA. 4, 70 M AND 4. 40 M, THEN THE MAXIMUM PITCH NUMBER EVEN ABOUT 1,200 SPACES WOULD RISE! QUANTITY: APPROX. FRAME ABOUT 444 UNITS IN DEPTH 1, 05 M FRAME APPROX. 20 PIECES AT DEPTH 0, 94M (THE NARROWER FRAMES ARE AVAILABLE AT THE PLACE OF DELIVERY, GET PAST THE BARS TO THE FRAME SO THE FRAMES ARE NARROW HERE) 200 TRAVERSES A 1, 80M 3,950 TRAVERSES A 3, 60M 200 "TRUSS DELIVERY" A 3, 60 M NOTE: 25% ARE ABOUT BROKEN FRAMES! WHERE THE DEFECTS TO THE PART CAN SIMPLY BE REPAIRED. ON REQUEST, THE PASSING PLACES (PALLET STATION) ARE WITH!
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1708</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3050</td> </tr> <tr> <td>year:</td> <td>2003</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>5000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>48.970h / 18.490 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>12 mm</td> </tr> <tr> <td>max. speed:</td> <td>200 / 300 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>11100 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>· closed machine frame with integrated laser unit\n· laser unit: co2 laser <strong>tlf 5000</strong>, radio-frequency excited, chiller, logbook function laser\n· automatic pallet changer and longitudinal conveyor for small parts / slag\n· drives: gantry drive in combination with linear direct drives\n· laser power control\n· hi-las high pressure cutting\n· plasma sensor system pss\n· pcs process control system\n· dias capacitive height regulation\n· high-speed processing with sprintlas\n· contourlas for producing small holes\n· programmable cutting gas pressure setting\n· laser cutting head with 5 lens and laser cutting head with 7.5 lens\n· cutting head quick-change device\n· automatic sheet edge detection\n· positioning laser diode\n· programmable power cycles\n· microweld\n· laser power control\n· automatic focus adjustment autolas plus\n· oil spray device for reliable thick plate machining\n· automatic shutdown\n· work area lighting\n· sinumerik 840d control: open pc-based control system, easy to operate, online help, diagnostic functions, \n maintenance logbook, technology data, teleservice, rj 45 network connection, 3.5 disc drive, tft color screen\n· shopfloor programming tops 100 lite\n· safety: multi-beam light barriers, completely encapsulated beam delivery purged with nitrogen, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1708
MANUFACTURER: TRUMPF
TYPE: TRUMATIC L 3050
YEAR: 2003
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 5000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 48.970H / 18.490 H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 20 MM
MAX. SHEET THICK./AI: 12 MM
MAX. SPEED: 200 / 300 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 11100 MM
WIDTH: 4600 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \NSTANDARD CONFIGURATION \N \N · CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT\N· LASER UNIT: CO2 LASER TLF 5000, RADIO-FREQUENCY EXCITED, CHILLER, LOGBOOK FUNCTION LASER\N· AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR FOR SMALL PARTS / SLAG\N· DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVES\N· LASER POWER CONTROL\N· HI-LAS HIGH PRESSURE CUTTING\N· PLASMA SENSOR SYSTEM PSS\N· PCS PROCESS CONTROL SYSTEM\N· DIAS CAPACITIVE HEIGHT REGULATION\N· HIGH-SPEED PROCESSING WITH SPRINTLAS\N· CONTOURLAS FOR PRODUCING SMALL HOLES\N· PROGRAMMABLE CUTTING GAS PRESSURE SETTING\N· LASER CUTTING HEAD WITH 5 LENS AND LASER CUTTING HEAD WITH 7.5 LENS\N· CUTTING HEAD QUICK-CHANGE DEVICE\N· AUTOMATIC SHEET EDGE DETECTION\N· POSITIONING LASER DIODE\N· PROGRAMMABLE POWER CYCLES\N· MICROWELD\N· LASER POWER CONTROL\N· AUTOMATIC FOCUS ADJUSTMENT AUTOLAS PLUS\N· OIL SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING\N· AUTOMATIC SHUTDOWN\N· WORK AREA LIGHTING\N· SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO OPERATE, ONLINE HELP, DIAGNOSTIC FUNCTIONS, \N MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE, RJ 45 NETWORK CONNECTION, 3.5 DISC DRIVE, TFT COLOR SCREEN\N· SHOPFLOOR PROGRAMMING TOPS 100 LITE\N· SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED BEAM DELIVERY PURGED WITH NITROGEN, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 45.600 €
Ubicación: Land-longitudinal seam welding machine manufacturer: schnelldorfer
type: elena 600-ii year: 2016
hours of operation: 300

plate thickness t = 0,6 mm - 1.0 mm
ã? 250 mm (in) - 600 mm (outside)
i = weld length up to 500 mm
pneumatic precision clamping system
pneumatic locking of the handle
pneumatic center stop
control siemens, axis control simodrive posma a including multi panel 5.7 "touch display
mig-o-mat plasma jet 250 sps tp, soft plasma welding machine cooling water recirculation cooler hyfra echilly 1
welding fume extraction on the burner with fumator minivac 250 d
parameter memory sets for 200 editors
control access to parent control via profibus dp/dp couplers siemens possible (automation interface)
 LONGITUDINAL SEAM WELDING MACHINE MANUFACTURER: SCHNELLDORFER TYPE: ELENA 600-II YEAR: 2016 HOURS OF OPERATION: 300 PLATE THICKNESS T = 0,6 MM - 1.0 MM &ATILDE;? 250 MM (IN) - 600 MM (OUTSIDE) I = WELD LENGTH UP TO 500 MM PNEUMATIC PRECISION CLAMPING SYSTEM PNEUMATIC LOCKING OF THE HANDLE PNEUMATIC CENTER STOP CONTROL SIEMENS, AXIS CONTROL SIMODRIVE POSMA A INCLUDING MULTI PANEL 5.7 "TOUCH DISPLAY MIG-O-MAT PLASMA JET 250 SPS TP, SOFT PLASMA WELDING MACHINE COOLING WATER RECIRCULATION COOLER HYFRA ECHILLY 1 WELDING FUME EXTRACTION ON THE BURNER WITH FUMATOR MINIVAC 250 D PARAMETER MEMORY SETS FOR 200 EDITORS CONTROL ACCESS TO PARENT CONTROL VIA PROFIBUS DP/DP COUPLERS SIEMENS POSSIBLE (AUTOMATION INTERFACE)
Vendedor: Bremer Werk für Montagesysteme GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1706</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 3530</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840d</td> </tr> <tr> <td>working hour:</td> <td>44173 / 18879 h </td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser truflow 4000<strong>, </strong>beam tube ventilation with n2 and lensline</li>\n	<li>nitroline: high pressure cutting for optimal, non-oxidizing cutting edges</li>\n	<li>automatic pallet changer with longitudinal conveyor</li>\n	<li>additional xp- axis</li>\n	<li>cutting head 5 lens</li>\n	<li>cutting head 7,5 lens</li>\n	<li>laser cutting head quick-change device</li>\n	<li>controlline: capacitive height regulation and process control</li>\n	<li>positioning laser diode</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>automatic sheet edge detection</li>\n	<li>programmable power cycles</li>\n	<li>compressed air cutting</li>\n	<li>pierceline</li>\n	<li>microweld</li>\n	<li>plasmaline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n	<li>pcs process control system</li>\n	<li>spray device</li>\n	<li>logbook function laser</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>sinumerik 840d control: 3.5 disk drive, tft colour screen, \n		<ul>\n		<li>rj45 network connection and usb interface, online-help. easy to use, maintenance logbook, diagnostic functions, integrated technology data</li>\n	</ul> </li> <li>shopfloor programming trutops laser lite</li>\n	<li>safefty: multi-beam light barriers, multi-chamber extraction and compact dust extractor, safety cabin</li>\n</ul>\n \n<strong>additional equipment</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>transverse conveyor with tilt container </li>\n	<li>mdr machine data recording</li>\n</ul>\n \n<strong>installation</strong> </h3>\n<strong> </strong> </h3>·right-hand installation machine\n \n<strong>automation</strong> </h3>\n\n	<ul>\n	<li>preparation liftmaster store, linear</li>\n</ul>\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1706
MANUFACTURER: TRUMPF
TYPE: TRULASER 3530
YEAR: 2008
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 4000 WATT
CONTROL: SIEMENS SINUMERIK 840D
WORKING HOUR: 44173 / 18879 H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 15 MM
MAX. SHEET THICK./AI: 10 MM
MAX. SPEED: 60/85 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 9300 MM
WIDTH: 4600 MM
HEIGHT: 2000 MM
WEIGHT: 11500 KG

\N \N \NSTANDARD CONFIGURATION \N \N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • LASER UNIT: CO2 LASER TRUFLOW 4000, BEAM TUBE VENTILATION WITH N2 AND LENSLINE
  • \N
  • NITROLINE: HIGH PRESSURE CUTTING FOR OPTIMAL, NON-OXIDIZING CUTTING EDGES
  • \N
  • AUTOMATIC PALLET CHANGER WITH LONGITUDINAL CONVEYOR
  • \N
  • ADDITIONAL XP- AXIS
  • \N
  • CUTTING HEAD 5 LENS
  • \N
  • CUTTING HEAD 7,5 LENS
  • \N
  • LASER CUTTING HEAD QUICK-CHANGE DEVICE
  • \N
  • CONTROLLINE: CAPACITIVE HEIGHT REGULATION AND PROCESS CONTROL
  • \N
  • POSITIONING LASER DIODE
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
  • \N
  • AUTOMATIC SHEET EDGE DETECTION
  • \N
  • PROGRAMMABLE POWER CYCLES
  • \N
  • COMPRESSED AIR CUTTING
  • \N
  • PIERCELINE
  • \N
  • MICROWELD
  • \N
  • PLASMALINE
  • \N
  • SPRINTLINE
  • \N
  • CONTOURLINE
  • \N
  • PCS PROCESS CONTROL SYSTEM
  • \N
  • SPRAY DEVICE
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • SINUMERIK 840D CONTROL: 3.5 DISK DRIVE, TFT COLOUR SCREEN, \N
      \N
    • RJ45 NETWORK CONNECTION AND USB INTERFACE, ONLINE-HELP. EASY TO USE, MAINTENANCE LOGBOOK, DIAGNOSTIC FUNCTIONS, INTEGRATED TECHNOLOGY DATA
    • \N
  • SHOPFLOOR PROGRAMMING TRUTOPS LASER LITE
  • \N
  • SAFEFTY: MULTI-BEAM LIGHT BARRIERS, MULTI-CHAMBER EXTRACTION AND COMPACT DUST EXTRACTOR, SAFETY CABIN
  • \N
\N \NADDITIONAL EQUIPMENT \N \N
    \N
  • TRANSVERSE CONVEYOR WITH TILT CONTAINER
  • \N
  • MDR MACHINE DATA RECORDING
  • \N
\N \NINSTALLATION \N ·RIGHT-HAND INSTALLATION MACHINE\N \NAUTOMATION \N\N
    \N
  • PREPARATION LIFTMASTER STORE, LINEAR
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 65.000 €
Ubicación: Land-- machine type - multislide punching and forming machine
- manufacturer - bihler
- model - grm 80
- year of manufacture - 1983
- equipped with - 4 normal slides, 1 narrow slide, 25 ton press,.
- bihler mh2 decoiler, year of mfg in 1984, 
- country of origin germany  - MACHINE TYPE - MULTISLIDE PUNCHING AND FORMING MACHINE - MANUFACTURER - BIHLER - MODEL - GRM 80 - YEAR OF MANUFACTURE - 1983 - EQUIPPED WITH - 4 NORMAL SLIDES, 1 NARROW SLIDE, 25 TON PRESS,. - BIHLER MH2 DECOILER, YEAR OF MFG IN 1984, - COUNTRY OF ORIGIN GERMANY
Vendedor: Boztas Kontaktbüro Deutschland
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1705</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 3530</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>44105 / 15050 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 m</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser truflow 4000<strong>, </strong>beam tube ventilation with n2 and lensline</li>\n	<li>nitroline: high pressure cutting for optimal, non-oxidizing cutting edges</li>\n	<li>automatic pallet changer with longitudinal conveyor</li>\n	<li>additional xp- axis</li>\n	<li>cutting head 5 lens</li>\n	<li>cutting head 7,5 lens</li>\n	<li>laser cutting head quick-change device</li>\n	<li>controlline: capacitive height regulation and process control</li>\n	<li>positioning laser diode</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>automatic sheet edge detection</li>\n	<li>programmable power cycles</li>\n	<li>compressed air cutting</li>\n	<li>pierceline</li>\n	<li>microweld</li>\n	<li>plasmaline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n	<li>pcs process control system</li>\n	<li>spray device</li>\n	<li>logbook function laser</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>sinumerik 840d control: 3.5 disk drive, tft colour screen, \n		<ul>\n		<li>rj45 network connection and usb interface, online-help. easy to use, maintenance logbook, diagnostic functions, integrated technology data</li>\n	</ul> </li> <li>shopfloor programming trutops laser lite</li>\n	<li>safefty: multi-beam light barriers, multi-chamber extraction and compact dust extractor, safety cabin</li>\n</ul>\n \n<strong>additional equipment</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>transverse conveyor with tilt container </li>\n	<li>mdr machine data recording</li>\n</ul>\n \n<strong>installation</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>right-hand installation machine</li>\n</ul>\n \n<strong>automation</strong> </h3>\n\n	<ul>\n	<li>preparation liftmaster store, linear</li>\n</ul>\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1705
MANUFACTURER: TRUMPF
TYPE: TRULASER 3530
YEAR: 2008
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 4000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 44105 / 15050 H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 15 M
MAX. SHEET THICK./AI: 10 MM
MAX. SPEED: 60/85 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 9300 MM
WIDTH: 4600 MM
HEIGHT: 2000 MM
WEIGHT: 11500 KG

\N \N \NSTANDARD CONFIGURATION \N \N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • LASER UNIT: CO2 LASER TRUFLOW 4000, BEAM TUBE VENTILATION WITH N2 AND LENSLINE
  • \N
  • NITROLINE: HIGH PRESSURE CUTTING FOR OPTIMAL, NON-OXIDIZING CUTTING EDGES
  • \N
  • AUTOMATIC PALLET CHANGER WITH LONGITUDINAL CONVEYOR
  • \N
  • ADDITIONAL XP- AXIS
  • \N
  • CUTTING HEAD 5 LENS
  • \N
  • CUTTING HEAD 7,5 LENS
  • \N
  • LASER CUTTING HEAD QUICK-CHANGE DEVICE
  • \N
  • CONTROLLINE: CAPACITIVE HEIGHT REGULATION AND PROCESS CONTROL
  • \N
  • POSITIONING LASER DIODE
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
  • \N
  • AUTOMATIC SHEET EDGE DETECTION
  • \N
  • PROGRAMMABLE POWER CYCLES
  • \N
  • COMPRESSED AIR CUTTING
  • \N
  • PIERCELINE
  • \N
  • MICROWELD
  • \N
  • PLASMALINE
  • \N
  • SPRINTLINE
  • \N
  • CONTOURLINE
  • \N
  • PCS PROCESS CONTROL SYSTEM
  • \N
  • SPRAY DEVICE
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • SINUMERIK 840D CONTROL: 3.5 DISK DRIVE, TFT COLOUR SCREEN, \N
      \N
    • RJ45 NETWORK CONNECTION AND USB INTERFACE, ONLINE-HELP. EASY TO USE, MAINTENANCE LOGBOOK, DIAGNOSTIC FUNCTIONS, INTEGRATED TECHNOLOGY DATA
    • \N
  • SHOPFLOOR PROGRAMMING TRUTOPS LASER LITE
  • \N
  • SAFEFTY: MULTI-BEAM LIGHT BARRIERS, MULTI-CHAMBER EXTRACTION AND COMPACT DUST EXTRACTOR, SAFETY CABIN
  • \N
\N \NADDITIONAL EQUIPMENT \N \N
    \N
  • TRANSVERSE CONVEYOR WITH TILT CONTAINER
  • \N
  • MDR MACHINE DATA RECORDING
  • \N
\N \NINSTALLATION \N \N
    \N
  • RIGHT-HAND INSTALLATION MACHINE
  • \N
\N \NAUTOMATION \N\N
    \N
  • PREPARATION LIFTMASTER STORE, LINEAR
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 45.600 €
Ubicación: Land-longitudinal seam welding machine manufacturer: schnelldorfer
type: elena 600-ii year: 2016
hours of operation: 300

plate thickness t = 0,6 mm - 1.0 mm
ã? 250 mm (in) - 600 mm (outside)
i = weld length up to 500 mm
pneumatic precision clamping system
pneumatic locking of the handle
pneumatic center stop
control siemens, axis control simodrive posma a including multi panel 5.7 "touch display
mig-o-mat plasma jet 250 sps tp, soft plasma welding machine cooling water recirculation cooler hyfra echilly 1
welding fume extraction on the burner with fumator minivac 250 d
parameter memory sets for 200 editors
control access to parent control via profibus dp/dp couplers siemens possible (automation interface)
 LONGITUDINAL SEAM WELDING MACHINE MANUFACTURER: SCHNELLDORFER TYPE: ELENA 600-II YEAR: 2016 HOURS OF OPERATION: 300 PLATE THICKNESS T = 0,6 MM - 1.0 MM &ATILDE;? 250 MM (IN) - 600 MM (OUTSIDE) I = WELD LENGTH UP TO 500 MM PNEUMATIC PRECISION CLAMPING SYSTEM PNEUMATIC LOCKING OF THE HANDLE PNEUMATIC CENTER STOP CONTROL SIEMENS, AXIS CONTROL SIMODRIVE POSMA A INCLUDING MULTI PANEL 5.7 "TOUCH DISPLAY MIG-O-MAT PLASMA JET 250 SPS TP, SOFT PLASMA WELDING MACHINE COOLING WATER RECIRCULATION COOLER HYFRA ECHILLY 1 WELDING FUME EXTRACTION ON THE BURNER WITH FUMATOR MINIVAC 250 D PARAMETER MEMORY SETS FOR 200 EDITORS CONTROL ACCESS TO PARENT CONTROL VIA PROFIBUS DP/DP COUPLERS SIEMENS POSSIBLE (AUTOMATION INTERFACE)
Vendedor: Bremer Werk für Montagesysteme GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1676</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trumatic l 3030</td> </tr> <tr> <td>year:</td> <td>2001</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>4000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>53.851h / 0h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>15 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>10 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>11500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration:</strong> </h3>\n\n	<ul>\n	<li>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser tlf 4000, new in 2019 including 12 months warranty by the manufacturer, radio-frequency excited, reflector telescope, chiller</li>\n	<li>automatic pallet changer and longitudinal conveyor </li>\n	<li>drives: maintenance-free 3-phase servo motors</li>\n	<li>working area light</li>\n	<li>automatic shut down</li>\n	<li>cutting head with 5 lens and additional cutting head with 7,5 lens</li>\n	<li>quick changing device for cutting head </li>\n	<li>lubrification spray device for a safe thick sheet machining</li>\n	<li>logbook function</li>\n	<li>automatic sheet edge detection</li>\n	<li>dias iii</li>\n	<li>cutting gas pressure setting programmable</li>\n	<li>programmable power cycles</li>\n	<li>hi-las high pressure cutting</li>\n	<li>plasma sensor system pms</li>\n	<li>fast processing with sprintlas </li>\n	<li>contourlas for producing small holes</li>\n	<li>microweld</li>\n	<li>control: open pc-based control system, easy to use, online help, diagnostic functions, </li>\n</ul> <strong> </strong>\n<strong> </strong> maintenance logbook, technology data, tele service, 3.5 disk drive, bnc-/rj45 connection\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>mde interface</li>\n	<li>shopfloor programming tops 100 lite</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, </li>\n</ul>\n multi-chamber extractionsystem and compact dust extractor, safety cabin\n \n<strong>addidional equipment</strong> </h3>\n\n	<ul>\n	<li>transverse conveyor with container</li>\n</ul> </h3>\n</h3> \n \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1676
MANUFACTURER: TRUMPF
TYPE: TRUMATIC L 3030
YEAR: 2001
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 4000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 53.851H / 0H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 15 MM
MAX. SHEET THICK./AI: 10 MM
MAX. SPEED: 60/85 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 9300 MM
WIDTH: 4600 MM
HEIGHT: 2000 MM
WEIGHT: 11500 KG

\N \N \NSTANDARD CONFIGURATION: \N\N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • LASER UNIT: CO2 LASER TLF 4000, NEW IN 2019 INCLUDING 12 MONTHS WARRANTY BY THE MANUFACTURER, RADIO-FREQUENCY EXCITED, REFLECTOR TELESCOPE, CHILLER
  • \N
  • AUTOMATIC PALLET CHANGER AND LONGITUDINAL CONVEYOR
  • \N
  • DRIVES: MAINTENANCE-FREE 3-PHASE SERVO MOTORS
  • \N
  • WORKING AREA LIGHT
  • \N
  • AUTOMATIC SHUT DOWN
  • \N
  • CUTTING HEAD WITH 5 LENS AND ADDITIONAL CUTTING HEAD WITH 7,5 LENS
  • \N
  • QUICK CHANGING DEVICE FOR CUTTING HEAD
  • \N
  • LUBRIFICATION SPRAY DEVICE FOR A SAFE THICK SHEET MACHINING
  • \N
  • LOGBOOK FUNCTION
  • \N
  • AUTOMATIC SHEET EDGE DETECTION
  • \N
  • DIAS III
  • \N
  • CUTTING GAS PRESSURE SETTING PROGRAMMABLE
  • \N
  • PROGRAMMABLE POWER CYCLES
  • \N
  • HI-LAS HIGH PRESSURE CUTTING
  • \N
  • PLASMA SENSOR SYSTEM PMS
  • \N
  • FAST PROCESSING WITH SPRINTLAS
  • \N
  • CONTOURLAS FOR PRODUCING SMALL HOLES
  • \N
  • MICROWELD
  • \N
  • CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE, ONLINE HELP, DIAGNOSTIC FUNCTIONS,
  • \N
\N MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE SERVICE, 3.5 DISK DRIVE, BNC-/RJ45 CONNECTION\N \N
    \N
  • MDE INTERFACE
  • \N
  • SHOPFLOOR PROGRAMMING TOPS 100 LITE
  • \N
  • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM,
  • \N
\N MULTI-CHAMBER EXTRACTIONSYSTEM AND COMPACT DUST EXTRACTOR, SAFETY CABIN\N \NADDIDIONAL EQUIPMENT \N\N
    \N
  • TRANSVERSE CONVEYOR WITH CONTAINER
  • \N
\N \N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Ubicación: Land-technical data:

work area: 6,000 x 2,000 x 115 mm control: siemens sinumerik 840 d laser power: 3,200 watts maximum sheet thickness structural steel: 20 mm maximum thickness stainless steel: 12 mm maximum thickness aluminium: 8 mm standard equipment:

-closed machine frame with integrated laser unit
-laser unit: co2 laser truflow 2000 high-frequency reflector telescope, cooling unit, maintenance-free turbo centrifugal blower, logbook function angeregt
-automatic pallet changer
-longitudinal conveyor for small parts/waste
-drives: maintenance-free three-phase servomotors
-cutting head quick change facility
-laser cutting head with 5 "lens and laser cutting head with 7.5" lens
-cutting gas pressure setting can be programmed
-apc capacitive height control and process control
-automatic focus position adjustment of autolas plus
-laser power control
-position laser diode
-hi-las high pressure cutting
-fast processing with sprintlas
-contourlas for making small holes
-pms plasmasensorik
-automatic sheet metal outer edge detection
-programmable power cycles
-microweld
-spraying device for secure thick sheet metal processing
-automatic switch-off
-lighting of workroom
-control sinumerik 840 d: open control on pc-based, easy to use, online help, integrated e-shop, diagnostics, maintenance logbook, technology data, tele-service
-shop floor programming lite tops 100
-security: multi-beam photoelectric beam delivery
fully encapsulated and ventilation, monitoring system, multi chamber extraction and compact dust collector, cab
-3.5 "floppy drive
-tft color display
-electrical equipment: voltage 400 v / 50 hz
-painting: standard ral 9002/5010

advanced features:

-more powerful laser truflow 3200 incl. mini
-pierceline (pcs - process control system)

(errors and omissions in the technical data, information and prices and subject to prior sale!) 


 TECHNICAL DATA: WORK AREA: 6,000 X 2,000 X 115 MM CONTROL: SIEMENS SINUMERIK 840 D LASER POWER: 3,200 WATTS MAXIMUM SHEET THICKNESS STRUCTURAL STEEL: 20 MM MAXIMUM THICKNESS STAINLESS STEEL: 12 MM MAXIMUM THICKNESS ALUMINIUM: 8 MM STANDARD EQUIPMENT: -CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT -LASER UNIT: CO2 LASER TRUFLOW 2000 HIGH-FREQUENCY REFLECTOR TELESCOPE, COOLING UNIT, MAINTENANCE-FREE TURBO CENTRIFUGAL BLOWER, LOGBOOK FUNCTION ANGEREGT -AUTOMATIC PALLET CHANGER -LONGITUDINAL CONVEYOR FOR SMALL PARTS/WASTE -DRIVES: MAINTENANCE-FREE THREE-PHASE SERVOMOTORS -CUTTING HEAD QUICK CHANGE FACILITY -LASER CUTTING HEAD WITH 5 "LENS AND LASER CUTTING HEAD WITH 7.5" LENS -CUTTING GAS PRESSURE SETTING CAN BE PROGRAMMED -APC CAPACITIVE HEIGHT CONTROL AND PROCESS CONTROL -AUTOMATIC FOCUS POSITION ADJUSTMENT OF AUTOLAS PLUS -LASER POWER CONTROL -POSITION LASER DIODE -HI-LAS HIGH PRESSURE CUTTING -FAST PROCESSING WITH SPRINTLAS -CONTOURLAS FOR MAKING SMALL HOLES -PMS PLASMASENSORIK -AUTOMATIC SHEET METAL OUTER EDGE DETECTION -PROGRAMMABLE POWER CYCLES -MICROWELD -SPRAYING DEVICE FOR SECURE THICK SHEET METAL PROCESSING -AUTOMATIC SWITCH-OFF -LIGHTING OF WORKROOM -CONTROL SINUMERIK 840 D: OPEN CONTROL ON PC-BASED, EASY TO USE, ONLINE HELP, INTEGRATED E-SHOP, DIAGNOSTICS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELE-SERVICE -SHOP FLOOR PROGRAMMING LITE TOPS 100 -SECURITY: MULTI-BEAM PHOTOELECTRIC BEAM DELIVERY FULLY ENCAPSULATED AND VENTILATION, MONITORING SYSTEM, MULTI CHAMBER EXTRACTION AND COMPACT DUST COLLECTOR, CAB -3.5 "FLOPPY DRIVE -TFT COLOR DISPLAY -ELECTRICAL EQUIPMENT: VOLTAGE 400 V / 50 HZ -PAINTING: STANDARD RAL 9002/5010 ADVANCED FEATURES: -MORE POWERFUL LASER TRUFLOW 3200 INCL. MINI -PIERCELINE (PCS - PROCESS CONTROL SYSTEM) (ERRORS AND OMISSIONS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: imc solutions GmbH
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1667</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 5030</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>7000 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>38193 / 14661h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>30 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>20 mm</td> </tr> <tr> <td>max. speed:</td> <td>300 m / min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>11000 mm</td> </tr> <tr> <td>width:</td> <td>4600 mm</td> </tr> <tr> <td>height:</td> <td>2400 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> \n \n \n<strong>standard configuration</strong> </h3>\n \n<strong>machine</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit</li>\n	<li>driving device for a high-precision machining</li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyer</li>\n	<li>drives: gantry drive in combination with linear direct drive</li>\n	<li>encapsulated beam guideway</li>\n	<li>new: one-cutting-head-strategy</li>\n	<li>nitroline</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>focusline</li>\n	<li>plasmaline</li>\n	<li>sprintline</li>\n	<li>contourline</li>\n	<li>microweld</li>\n	<li>oil spray device</li>\n	<li>positioning laser diode</li>\n	<li>programmable cutting gas selection/pressure setting</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>trutops laser lite</li>\n	<li>tft colour screen</li>\n	<li>shop floor programming</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>trumpf laser</strong> </li>\n	<li>co2-laser truflow 7000</li>\n	<li>maintenance-free radial turbo blowers</li>\n	<li>high frequency excitement</li>\n	<li>laser control tasc 3</li>\n	<li>laser power control</li>\n	<li>logbook function laser</li>\n	<li>cooling unit</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>laser cutting head</strong> </li>\n	<li>lensline with status check</li>\n	<li>laser cutting head with 250mm lens</li>\n	<li>laser cutting head quick change device (uti)</li>\n	<li>controlline</li>\n	<li>pierceline</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>control</strong> </li>\n	<li>control siemens sinumerik 840d</li>\n	<li>simple operation</li>\n	<li>integrated technology data</li>\n	<li>online-help</li>\n	<li>integrated e-shop</li>\n	<li>diagnostic functions</li>\n	<li>teleservice</li>\n	<li> </li>\n	<li> <strong> </strong> <strong>data transfer</strong> </li>\n	<li>rj45 network connection </li>\n	<li>usb interface</li>\n	<li> </li>\n	<li> <strong> </strong> </h3> <strong> </strong> <strong>safety</strong> </li>\n	<li>ce-marking</li>\n	<li>light barriers</li>\n	<li>laser monitoring system</li>\n	<li>multi chamber extraction system</li>\n	<li>compact dust extractor</li>\n	<li>machine cover with makrolon panels</li>\n	<li> </h3> </h3> </li>\n	<li> <strong> </strong> </h3> <strong>additional equipment</strong> </h3> </li>\n	<li> <strong> </strong> </h3> </li>\n	<li>machine up to 43° ambient temperature</li>\n	<li> </li>\n	<li> <strong> </strong> </h3> <strong>automation</strong> </h3> </li>\n	<li> <strong> </strong> </h3> </li>\n	<li>preparation loadmaster</li>\n</ul>\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1667
MANUFACTURER: TRUMPF
TYPE: TRULASER 5030
YEAR: 2008
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 7000 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 38193 / 14661H
MAX. SHEET THICK./ST: 25 MM
MAX. SHEET THICK./VA: 30 MM
MAX. SHEET THICK./AI: 20 MM
MAX. SPEED: 300 M / MIN
POSITIONING ACCURACY: 0,1 MM
LENGTH: 11000 MM
WIDTH: 4600 MM
HEIGHT: 2400 MM
WEIGHT: 12000 KG

\N \N \NSTANDARD CONFIGURATION \N \NMACHINE\N \N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • DRIVING DEVICE FOR A HIGH-PRECISION MACHINING
  • \N
  • AUTOMATIC PALLET CHANGER
  • \N
  • LONGITUDINAL CONVEYER
  • \N
  • DRIVES: GANTRY DRIVE IN COMBINATION WITH LINEAR DIRECT DRIVE
  • \N
  • ENCAPSULATED BEAM GUIDEWAY
  • \N
  • NEW: ONE-CUTTING-HEAD-STRATEGY
  • \N
  • NITROLINE
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • FOCUSLINE
  • \N
  • PLASMALINE
  • \N
  • SPRINTLINE
  • \N
  • CONTOURLINE
  • \N
  • MICROWELD
  • \N
  • OIL SPRAY DEVICE
  • \N
  • POSITIONING LASER DIODE
  • \N
  • PROGRAMMABLE CUTTING GAS SELECTION/PRESSURE SETTING
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • TRUTOPS LASER LITE
  • \N
  • TFT COLOUR SCREEN
  • \N
  • SHOP FLOOR PROGRAMMING
  • \N
  • \N
  • TRUMPF LASER
  • \N
  • CO2-LASER TRUFLOW 7000
  • \N
  • MAINTENANCE-FREE RADIAL TURBO BLOWERS
  • \N
  • HIGH FREQUENCY EXCITEMENT
  • \N
  • LASER CONTROL TASC 3
  • \N
  • LASER POWER CONTROL
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
  • COOLING UNIT
  • \N
  • \N
  • LASER CUTTING HEAD
  • \N
  • LENSLINE WITH STATUS CHECK
  • \N
  • LASER CUTTING HEAD WITH 250MM LENS
  • \N
  • LASER CUTTING HEAD QUICK CHANGE DEVICE (UTI)
  • \N
  • CONTROLLINE
  • \N
  • PIERCELINE
  • \N
  • \N
  • CONTROL
  • \N
  • CONTROL SIEMENS SINUMERIK 840D
  • \N
  • SIMPLE OPERATION
  • \N
  • INTEGRATED TECHNOLOGY DATA
  • \N
  • ONLINE-HELP
  • \N
  • INTEGRATED E-SHOP
  • \N
  • DIAGNOSTIC FUNCTIONS
  • \N
  • TELESERVICE
  • \N
  • \N
  • DATA TRANSFER
  • \N
  • RJ45 NETWORK CONNECTION
  • \N
  • USB INTERFACE
  • \N
  • \N
  • SAFETY
  • \N
  • CE-MARKING
  • \N
  • LIGHT BARRIERS
  • \N
  • LASER MONITORING SYSTEM
  • \N
  • MULTI CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MACHINE COVER WITH MAKROLON PANELS
  • \N
  • \N
  • ADDITIONAL EQUIPMENT
  • \N
  • \N
  • MACHINE UP TO 43° AMBIENT TEMPERATURE
  • \N
  • \N
  • AUTOMATION
  • \N
  • \N
  • PREPARATION LOADMASTER
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 3.140 €
Ubicación: Land-transnorm belt curve by 180 â° right
(shown in picture with arrow)
inner radius ir = 600 mm
project no. v169004
pos. 12.110
id.nr. 00406477
sew motor (not in picture)

optionally available:
4 double support ã  â?¬69
height-adjustable, ok belt + 800 +/-50mm

l x w x h = 2500 x 1200 x 300 mm
shipping weight: 140 kg TRANSNORM BELT CURVE BY 180 &ACIRC;&DEG; RIGHT (SHOWN IN PICTURE WITH ARROW) INNER RADIUS IR = 600 MM PROJECT NO. V169004 POS. 12.110 ID.NR. 00406477 SEW MOTOR (NOT IN PICTURE) OPTIONALLY AVAILABLE: 4 DOUBLE SUPPORT &ATILDE;&NBSP; &ACIRC;?&NOT;69 HEIGHT-ADJUSTABLE, OK BELT + 800 +/-50MM L X W X H = 2500 X 1200 X 300 MM SHIPPING WEIGHT: 140 KG
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1685</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser 3040</td> </tr> <tr> <td>year:</td> <td>2008</td> </tr> <tr> <td>working area:</td> <td>4000 x 2000 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>3200 watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>45.561 h / 23.289 h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>20 mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>12 mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>8 mm</td> </tr> <tr> <td>max. speed:</td> <td>60/85 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>+/- 0,1 mm</td> </tr> <tr> <td>length:</td> <td>11600 mm</td> </tr> <tr> <td>width:</td> <td>5200 mm</td> </tr> <tr> <td>height:</td> <td>2000 mm</td> </tr> <tr> <td>weight:</td> <td>16500 kg</td> </tr> </tbody> </table> <br> \n<strong> </strong> </h3> \n<strong> </strong> </h3> \n<strong>standard configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>closed machine frame with integrated laser unit</li>\n	<li>laser unit: co2 laser truflow 3200 watt, radio-frequency excited, mirror telescope, chiller, logbook function </li>\n	<li>automatic pallet changer</li>\n	<li>longitudinal conveyor for small parts/slag</li>\n	<li>drives with maintenance-free servo motors</li>\n	<li>laser cutting head with 5 lens</li>\n	<li>laser cutting head with 7,5 lens</li>\n	<li>programmable cutting gas pressure setting</li>\n	<li>controlline: maintains a constant stand-off between the nozzle and the workpiece during the cutting operation</li>\n	<li>focusline: program-controlled focus adjustment to different material types and thicknesses</li>\n	<li>laser power control</li>\n	<li>positioning laser diode</li>\n	<li>nitroline: high-pressure cutting </li>\n	<li>sprintline: high-speed processing</li>\n	<li>contourline: for producing small holes</li>\n	<li>plasmaline</li>\n	<li>automatic sheet edge detection </li>\n	<li>programmable power cycles</li>\n	<li>microweld</li>\n	<li>spray device for reliable thick plate machining</li>\n	<li>automatic shutdown</li>\n	<li>working area lighting</li>\n	<li>sinumerik 840d control: open pc-based control system, easy to use</li>\n</ul>\nonline help, diagnostic functions, maintenance logbook, technology data, teleservice \n\n	<ul>\n	<li>shopfloor programming</li>\n	<li>safety: multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact</li>\n</ul>\n dust extractor, safety cabin \n\n	<ul>\n	<li>network connection rj45, 3.5 disk drive, tft color screen</li>\n</ul>\n \n<strong>additional configuration</strong> </h3>\n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>pierceline</li>\n</ul>\n \n<strong> </strong> </h3>

TECHNICAL DATA

ITEM NUMBER: LM-1685
MANUFACTURER: TRUMPF
TYPE: TRULASER 3040
YEAR: 2008
WORKING AREA: 4000 X 2000 X 115 MM
LASER RATED OUTPUT: 3200 WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 45.561 H / 23.289 H
MAX. SHEET THICK./ST: 20 MM
MAX. SHEET THICK./VA: 12 MM
MAX. SHEET THICK./AI: 8 MM
MAX. SPEED: 60/85 M/MIN
POSITIONING ACCURACY: +/- 0,1 MM
LENGTH: 11600 MM
WIDTH: 5200 MM
HEIGHT: 2000 MM
WEIGHT: 16500 KG

\N \N \NSTANDARD CONFIGURATION \N \N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • LASER UNIT: CO2 LASER TRUFLOW 3200 WATT, RADIO-FREQUENCY EXCITED, MIRROR TELESCOPE, CHILLER, LOGBOOK FUNCTION
  • \N
  • AUTOMATIC PALLET CHANGER
  • \N
  • LONGITUDINAL CONVEYOR FOR SMALL PARTS/SLAG
  • \N
  • DRIVES WITH MAINTENANCE-FREE SERVO MOTORS
  • \N
  • LASER CUTTING HEAD WITH 5 LENS
  • \N
  • LASER CUTTING HEAD WITH 7,5 LENS
  • \N
  • PROGRAMMABLE CUTTING GAS PRESSURE SETTING
  • \N
  • CONTROLLINE: MAINTAINS A CONSTANT STAND-OFF BETWEEN THE NOZZLE AND THE WORKPIECE DURING THE CUTTING OPERATION
  • \N
  • FOCUSLINE: PROGRAM-CONTROLLED FOCUS ADJUSTMENT TO DIFFERENT MATERIAL TYPES AND THICKNESSES
  • \N
  • LASER POWER CONTROL
  • \N
  • POSITIONING LASER DIODE
  • \N
  • NITROLINE: HIGH-PRESSURE CUTTING
  • \N
  • SPRINTLINE: HIGH-SPEED PROCESSING
  • \N
  • CONTOURLINE: FOR PRODUCING SMALL HOLES
  • \N
  • PLASMALINE
  • \N
  • AUTOMATIC SHEET EDGE DETECTION
  • \N
  • PROGRAMMABLE POWER CYCLES
  • \N
  • MICROWELD
  • \N
  • SPRAY DEVICE FOR RELIABLE THICK PLATE MACHINING
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • SINUMERIK 840D CONTROL: OPEN PC-BASED CONTROL SYSTEM, EASY TO USE
  • \N
\NONLINE HELP, DIAGNOSTIC FUNCTIONS, MAINTENANCE LOGBOOK, TECHNOLOGY DATA, TELESERVICE \N\N
    \N
  • SHOPFLOOR PROGRAMMING
  • \N
  • SAFETY: MULTI-BEAM LIGHT BARRIERS, COMPLETELY ENCAPSULATED AND PURGED BEAM DELIVERY, MONITORING SYSTEM, MULTI-CHAMBER EXTRACTION SYSTEM AND COMPACT
  • \N
\N DUST EXTRACTOR, SAFETY CABIN \N\N
    \N
  • NETWORK CONNECTION RJ45, 3.5 DISK DRIVE, TFT COLOR SCREEN
  • \N
\N \NADDITIONAL CONFIGURATION \N \N
    \N
  • PIERCELINE
  • \N
\N \N
Vendedor: I-H&S GmbH
Año de construcción: usado
Precio: 10.000 €
Ubicación: Land-microsteppls1200130 plasma fire-cutter 

year: 2006
plasma source: hypertherm hpr260
control unit: micro stepmsn500
work surface: 12 x 3 m
filter unit is not included. 
counter read: 27.623 hours
max. plate thickness: 50 mm
provided with fuses cabinet provided with main switch.
dimensions: 4.554 x 14.100 x 1.800 mm
x-axle: up to 12,000 mm
y-axle max.: 3000 mm
z-axle, max: 50 mm

max. dim. workpiece:
x: 12,800 mm
y: 3.000 mm
black: 50 mm

maximum material, thickness:
steel: 40 mm
stainless steel: 35 mm
frame: 35 mm

power: 380 volt, 70 kva

this is an online auction: more info and bidding via this url: abcs://abc.moyersoen-auctions.com/lot/2192097/15122/
 MICROSTEPPLS1200130 PLASMA FIRE-CUTTER YEAR: 2006 PLASMA SOURCE: HYPERTHERM HPR260 CONTROL UNIT: MICRO STEPMSN500 WORK SURFACE: 12 X 3 M FILTER UNIT IS NOT INCLUDED. COUNTER READ: 27.623 HOURS MAX. PLATE THICKNESS: 50 MM PROVIDED WITH FUSES CABINET PROVIDED WITH MAIN SWITCH. DIMENSIONS: 4.554 X 14.100 X 1.800 MM X-AXLE: UP TO 12,000 MM Y-AXLE MAX.: 3000 MM Z-AXLE, MAX: 50 MM MAX. DIM. WORKPIECE: X: 12,800 MM Y: 3.000 MM BLACK: 50 MM MAXIMUM MATERIAL, THICKNESS: STEEL: 40 MM STAINLESS STEEL: 35 MM FRAME: 35 MM POWER: 380 VOLT, 70 KVA THIS IS AN ONLINE AUCTION: MORE INFO AND BIDDING VIA THIS URL: ABCS://ABC.MOYERSOEN-AUCTIONS.COM/LOT/2192097/15122/
Vendedor: Moyersoen NV
Año de construcción: usado
Ubicación: Land-<h3>technical data</h3> <table> <tbody> <tr> <td>item number:</td> <td>lm-1704</td> </tr> <tr> <td>manufacturer:</td> <td>trumpf</td> </tr> <tr> <td>type:</td> <td>trulaser l 3030 (l20)</td> </tr> <tr> <td>year:</td> <td>2011</td> </tr> <tr> <td>working area:</td> <td>3000 x 1500 x 115 mm</td> </tr> <tr> <td>laser rated output:</td> <td>6000watt</td> </tr> <tr> <td>control:</td> <td>siemens sinumerik 840 d</td> </tr> <tr> <td>working hour:</td> <td>41.777h / 22.178h</td> </tr> <tr> <td>max. sheet thick./st:</td> <td>25mm</td> </tr> <tr> <td>max. sheet thick./va:</td> <td>25mm</td> </tr> <tr> <td>max. sheet thick./ai:</td> <td>15mm</td> </tr> <tr> <td>max. speed:</td> <td>100/140 m/min</td> </tr> <tr> <td>positioning accuracy:</td> <td>0,1 mm</td> </tr> <tr> <td>length:</td> <td>9300 mm</td> </tr> <tr> <td>width:</td> <td>7600 mm</td> </tr> <tr> <td>height:</td> <td>2200 mm</td> </tr> <tr> <td>weight:</td> <td>12000 kg</td> </tr> </tbody> </table> <br> <strong>standard configuration</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3> <strong>machine</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>closed machine frame with integrated laser unit</li>\n	<li>motion unit for high precision processing</li>\n	<li>torque drive in combination with direct linear drives</li>\n	<li>enclosed beam delivery system</li>\n	<li>one cutting head strategy</li>\n	<li>chiller</li>\n	<li>automatic pallet changer, lengthwise installation</li>\n	<li>longitudinal conveyor</li>\n	<li>ergonomic control panel with touchscreen</li>\n	<li>working area lighting</li>\n	<li>positioning laser diode</li>\n	<li>spray device</li>\n	<li>pierceline</li>\n	<li>focuslineplus</li>\n	<li>nitroline</li>\n	<li>plasmaline</li>\n</ul>\n \n<strong>trumpf laser</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>co2-laser truflow 6000 with optimized standby</li>\n	<li>and beam tube purge with n2 </li>\n	<li>maintenance-free radial turbine blower</li>\n	<li>radio-frequency excitation</li>\n	<li>gas mixer (integrated)</li>\n	<li>laser control tasc 3</li>\n	<li>laser power control</li>\n	<li>logbook function laser</li>\n</ul>\n \n<strong>laser cutting head</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>laser cutting head with 250 mm lens</li>\n	<li>universal quick-change device (uti) incl. bus connection</li>\n	<li>lensline </li>\n	<li>controlline: height regulation and sheet edge detection</li>\n</ul>\n \n<strong>control</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>sinumerik 840d sl control</li>\n	<li>colour touchscreen 17</li>\n	<li>extended shopfloor programming</li>\n	<li>fast postproduction</li>\n	<li>automatic shutdown</li>\n	<li>contourline</li>\n	<li>fastline</li>\n	<li>flyline</li>\n	<li>microweld</li>\n	<li>production plan</li>\n	<li>adjustline</li>\n	<li>teleservice via internet</li>\n</ul>\n \n<strong>data transfer</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>usb interface</li>\n	<li>rj-45 network connection</li>\n</ul>\n \n<strong>safety</strong>\n<strong> </strong>\n	<ul>\n	<li> <strong> </strong>ce marking</li>\n	<li>light barriers</li>\n	<li>multi-chamber extraction system </li>\n	<li>compact dust extractor</li>\n	<li>machine enclosure consisting of macrolon panels</li>\n</ul>\n \n<strong> </strong> </h3> <strong>additional equipment</strong> </h3>\n<strong> </strong> </h3> \n<strong> </strong> </h3>\n	<ul>\n	<li> <strong> </strong> </h3>additional laser cutting head with 130mm lens</li>\n</ul>\n \n

TECHNICAL DATA

ITEM NUMBER: LM-1704
MANUFACTURER: TRUMPF
TYPE: TRULASER L 3030 (L20)
YEAR: 2011
WORKING AREA: 3000 X 1500 X 115 MM
LASER RATED OUTPUT: 6000WATT
CONTROL: SIEMENS SINUMERIK 840 D
WORKING HOUR: 41.777H / 22.178H
MAX. SHEET THICK./ST: 25MM
MAX. SHEET THICK./VA: 25MM
MAX. SHEET THICK./AI: 15MM
MAX. SPEED: 100/140 M/MIN
POSITIONING ACCURACY: 0,1 MM
LENGTH: 9300 MM
WIDTH: 7600 MM
HEIGHT: 2200 MM
WEIGHT: 12000 KG

STANDARD CONFIGURATION \N \N MACHINE\N \N
    \N
  • CLOSED MACHINE FRAME WITH INTEGRATED LASER UNIT
  • \N
  • MOTION UNIT FOR HIGH PRECISION PROCESSING
  • \N
  • TORQUE DRIVE IN COMBINATION WITH DIRECT LINEAR DRIVES
  • \N
  • ENCLOSED BEAM DELIVERY SYSTEM
  • \N
  • ONE CUTTING HEAD STRATEGY
  • \N
  • CHILLER
  • \N
  • AUTOMATIC PALLET CHANGER, LENGTHWISE INSTALLATION
  • \N
  • LONGITUDINAL CONVEYOR
  • \N
  • ERGONOMIC CONTROL PANEL WITH TOUCHSCREEN
  • \N
  • WORKING AREA LIGHTING
  • \N
  • POSITIONING LASER DIODE
  • \N
  • SPRAY DEVICE
  • \N
  • PIERCELINE
  • \N
  • FOCUSLINEPLUS
  • \N
  • NITROLINE
  • \N
  • PLASMALINE
  • \N
\N \NTRUMPF LASER\N \N
    \N
  • CO2-LASER TRUFLOW 6000 WITH OPTIMIZED STANDBY
  • \N
  • AND BEAM TUBE PURGE WITH N2
  • \N
  • MAINTENANCE-FREE RADIAL TURBINE BLOWER
  • \N
  • RADIO-FREQUENCY EXCITATION
  • \N
  • GAS MIXER (INTEGRATED)
  • \N
  • LASER CONTROL TASC 3
  • \N
  • LASER POWER CONTROL
  • \N
  • LOGBOOK FUNCTION LASER
  • \N
\N \NLASER CUTTING HEAD\N \N
    \N
  • LASER CUTTING HEAD WITH 250 MM LENS
  • \N
  • UNIVERSAL QUICK-CHANGE DEVICE (UTI) INCL. BUS CONNECTION
  • \N
  • LENSLINE
  • \N
  • CONTROLLINE: HEIGHT REGULATION AND SHEET EDGE DETECTION
  • \N
\N \NCONTROL\N \N
    \N
  • SINUMERIK 840D SL CONTROL
  • \N
  • COLOUR TOUCHSCREEN 17
  • \N
  • EXTENDED SHOPFLOOR PROGRAMMING
  • \N
  • FAST POSTPRODUCTION
  • \N
  • AUTOMATIC SHUTDOWN
  • \N
  • CONTOURLINE
  • \N
  • FASTLINE
  • \N
  • FLYLINE
  • \N
  • MICROWELD
  • \N
  • PRODUCTION PLAN
  • \N
  • ADJUSTLINE
  • \N
  • TELESERVICE VIA INTERNET
  • \N
\N \NDATA TRANSFER\N \N
    \N
  • USB INTERFACE
  • \N
  • RJ-45 NETWORK CONNECTION
  • \N
\N \NSAFETY\N \N
    \N
  • CE MARKING
  • \N
  • LIGHT BARRIERS
  • \N
  • MULTI-CHAMBER EXTRACTION SYSTEM
  • \N
  • COMPACT DUST EXTRACTOR
  • \N
  • MACHINE ENCLOSURE CONSISTING OF MACROLON PANELS
  • \N
\N \N ADDITIONAL EQUIPMENT \N \N \N
    \N
  • ADDITIONAL LASER CUTTING HEAD WITH 130MM LENS
  • \N
\N \N
Vendedor: I-H&S GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)