199 ofertas

Año de construcción: usado
Ubicación: Land-nennumformkraft: 150 t weight: 22000 kg
the machine is in good technical condition, by prior agreement the possibility of testing. including the roller conveyor. NENNUMFORMKRAFT: 150 T WEIGHT: 22000 KG THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. INCLUDING THE ROLLER CONVEYOR.
Vendedor: CEE-Machines
Año de construcción: usado
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-weight approx.: 7000 kg<br/>dimensions (l x w x h) approx.: 5000 x 2300 x 2560 mm<br/>description: grinding length maximum 1200 mm. grinding width maximum 550 mm. grinding height maximum 450 mm. table size 1200x450 mm. grinding wheel dimensions 400x127x100 mm. maximum transversal travel 500 mm. cnc fagor. grinding wheel power 10 hp WEIGHT APPROX.: 7000 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2300 X 2560 MM
DESCRIPTION: GRINDING LENGTH MAXIMUM 1200 MM. GRINDING WIDTH MAXIMUM 550 MM. GRINDING HEIGHT MAXIMUM 450 MM. TABLE SIZE 1200X450 MM. GRINDING WHEEL DIMENSIONS 400X127X100 MM. MAXIMUM TRANSVERSAL TRAVEL 500 MM. CNC FAGOR. GRINDING WHEEL POWER 10 HP
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ma
machine type lathe - cycle controlled make emco type emcomat e300 year 2007 control type cnc storage france country of origin germany delivery immediately cargo base from site technical details

turning diameter 275 mm, turning length 2000 mm control fagor 8055 tc recirculating diameter over bed slide 570 mm circular diameter 340 mm x 310 mm travel - travel - z 2000 mm spindle head din 55027 / 8 x 220 bar diameter 68 mm chuck diameter 250 mm rapid traverse x-ac hse 5 m / min rapid traverse z axis 10 m/min spindle taper multifix c quill diameter 100 mm quill stroke 220 mm recording mk 5 rpm - stem 2 ~ 2,500 rpm total power 24 kw machine weight 4 tons of space approximately 3.4 x 1.6 x 1.8 m accessories kã¼ hlmitteleinrichtung tailstock div. tool holder additional information

lathe - cycle control
 emcomat e 300 x 2000
 feed + bezel + multi fix MA MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE EMCO TYPE EMCOMAT E300 YEAR 2007 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 275 MM, TURNING LENGTH 2000 MM CONTROL FAGOR 8055 TC RECIRCULATING DIAMETER OVER BED SLIDE 570 MM CIRCULAR DIAMETER 340 MM X 310 MM TRAVEL - TRAVEL - Z 2000 MM SPINDLE HEAD DIN 55027 / 8 X 220 BAR DIAMETER 68 MM CHUCK DIAMETER 250 MM RAPID TRAVERSE X-AC HSE 5 M / MIN RAPID TRAVERSE Z AXIS 10 M/MIN SPINDLE TAPER MULTIFIX C QUILL DIAMETER 100 MM QUILL STROKE 220 MM RECORDING MK 5 RPM - STEM 2 ~ 2,500 RPM TOTAL POWER 24 KW MACHINE WEIGHT 4 TONS OF SPACE APPROXIMATELY 3.4 X 1.6 X 1.8 M ACCESSORIES K&ATILDE;&FRAC14; HLMITTELEINRICHTUNG TAILSTOCK DIV. TOOL HOLDER ADDITIONAL INFORMATION LATHE - CYCLE CONTROL EMCOMAT E 300 X 2000 FEED + BEZEL + MULTI FIX
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 5.750 €
Ubicación: Land-weight approx.: 2600 kg<br/>dimensions (l x w x h) approx.: 7400 x 2750 x 2480 mm<br/>description: ? cnc machining center<br> ? serial number 8144302<br> ? working area approx. 4400 x 1200 mm<br> ? panel passage height 65 mm<br> ? maximum travel speed in the axes direction x-y-z: 75-45-15 m/min<br> ? tool changer with 6 positions<br> ? main milling spindle hsd es919 with connection iso 30<br> ? saw unit motor 1.80 kw<br> ? vertical drilling spindles in x-axis direction: 14<br> ? vertical drilling spindles in y-axis direction: 5<br> ? horizontal drilling spindles in x-axis direction: 2 + 2<br> ? horizontal drilling spindles in y-axis direction: 2 + 2<br> ? numerical control fagor 8055<br> ? 8 consoles with 20 vacuum suction cups in total<br> ? vacuum pump busch ra 0100 e 501<br> ? the tools that appears in the photos are included WEIGHT APPROX.: 2600 KG
DIMENSIONS (L X W X H) APPROX.: 7400 X 2750 X 2480 MM
DESCRIPTION: ? CNC MACHINING CENTER
? SERIAL NUMBER 8144302
? WORKING AREA APPROX. 4400 X 1200 MM
? PANEL PASSAGE HEIGHT 65 MM
? MAXIMUM TRAVEL SPEED IN THE AXES DIRECTION X-Y-Z: 75-45-15 M/MIN
? TOOL CHANGER WITH 6 POSITIONS
? MAIN MILLING SPINDLE HSD ES919 WITH CONNECTION ISO 30
? SAW UNIT MOTOR 1.80 KW
? VERTICAL DRILLING SPINDLES IN X-AXIS DIRECTION: 14
? VERTICAL DRILLING SPINDLES IN Y-AXIS DIRECTION: 5
? HORIZONTAL DRILLING SPINDLES IN X-AXIS DIRECTION: 2 + 2
? HORIZONTAL DRILLING SPINDLES IN Y-AXIS DIRECTION: 2 + 2
? NUMERICAL CONTROL FAGOR 8055
? 8 CONSOLES WITH 20 VACUUM SUCTION CUPS IN TOTAL
? VACUUM PUMP BUSCH RA 0100 E 501
? THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-machine data:

work area: top width 1,500 mm
turning diameter over bed 660 mm
turning diameter over support of to 560 mm
traverse path x-axis 350 mm
stroke z1-axis 1,470 mm
main spindle: spindle tool changer 4 fold
spindle speed 60 - 2,000 min-1
spindle bore 70 mm
tailstock: tailstock quill diameter 75 mm
mk 5 tailstock taper tailstock quill stroke 150 mm
transmission performance main spindle motor power 18.5 kw / 400 v dimensions and weights: dimensions 3,740 x 1.900 1.850 mm
weight 3,600 kg

equipment:-control fagor 8055 itc
-3-b - chuck ã? 250 mm
-4-position tool changer
-bezel running with ã? 20-90 mm
-led work light
-bezel set ã? 20-150 mm

MACHINE DATA: WORK AREA: TOP WIDTH 1,500 MM TURNING DIAMETER OVER BED 660 MM TURNING DIAMETER OVER SUPPORT OF TO 560 MM TRAVERSE PATH X-AXIS 350 MM STROKE Z1-AXIS 1,470 MM MAIN SPINDLE: SPINDLE TOOL CHANGER 4 FOLD SPINDLE SPEED 60 - 2,000 MIN-1 SPINDLE BORE 70 MM TAILSTOCK: TAILSTOCK QUILL DIAMETER 75 MM MK 5 TAILSTOCK TAPER TAILSTOCK QUILL STROKE 150 MM TRANSMISSION PERFORMANCE MAIN SPINDLE MOTOR POWER 18.5 KW / 400 V DIMENSIONS AND WEIGHTS: DIMENSIONS 3,740 X 1.900 1.850 MM WEIGHT 3,600 KG EQUIPMENT:-CONTROL FAGOR 8055 ITC -3-B - CHUCK &ATILDE;? 250 MM -4-POSITION TOOL CHANGER -BEZEL RUNNING WITH &ATILDE;? 20-90 MM -LED WORK LIGHT -BEZEL SET &ATILDE;? 20-150 MM
Vendedor: Gross Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.400 €
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5300 x 2800 x 2250 mm<br/>description: serial number 8145003, working area approx. 4400 x 950 mm, panel passage height 135 mm, travelling way x-axis: 5281 mm, travelling way y-axis: 1663 mm, travelling way z-axis: 200 mm, path-feed rate max. x-axis: 75 m/min, path-feed rate max. y-axis: 60 m/min, path-feed rate z-axis: 20 m/min, main spindle hsd es919 with 7.50 kw and connection iso 30, saw unit motor, drilling head vertical x-axis: 6, drilling head vertical y-axis: 16, drilling head horizontal x-axis: 3 + 3, drilling head horizontal y-axis: 5 + 5, control fagor 8055, 6 consoles with 4 vacuum suction cups each, vacuum pump sogevac sv100, the tools that appears in the photos are included WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5300 X 2800 X 2250 MM
DESCRIPTION: SERIAL NUMBER 8145003, WORKING AREA APPROX. 4400 X 950 MM, PANEL PASSAGE HEIGHT 135 MM, TRAVELLING WAY X-AXIS: 5281 MM, TRAVELLING WAY Y-AXIS: 1663 MM, TRAVELLING WAY Z-AXIS: 200 MM, PATH-FEED RATE MAX. X-AXIS: 75 M/MIN, PATH-FEED RATE MAX. Y-AXIS: 60 M/MIN, PATH-FEED RATE Z-AXIS: 20 M/MIN, MAIN SPINDLE HSD ES919 WITH 7.50 KW AND CONNECTION ISO 30, SAW UNIT MOTOR, DRILLING HEAD VERTICAL X-AXIS: 6, DRILLING HEAD VERTICAL Y-AXIS: 16, DRILLING HEAD HORIZONTAL X-AXIS: 3 + 3, DRILLING HEAD HORIZONTAL Y-AXIS: 5 + 5, CONTROL FAGOR 8055, 6 CONSOLES WITH 4 VACUUM SUCTION CUPS EACH, VACUUM PUMP SOGEVAC SV100, THE TOOLS THAT APPEARS IN THE PHOTOS ARE INCLUDED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-stock number: 3362
flat grinding machine
manufacturer: danobat, type: rt-4000 sp
machine no.: 007, year of construction: 1987

specifications: loop area 4000 x 1000 mm mm
table size 4000 x 1000 mm
grinding length 4100 mm grinding width 1100 mm gr. stone diameter 650 mm
gr. stone width 200 mm
gr. workpiece height 1000 mm
grinding motor 36.8 kw
total power 48 kw
cnc control.
control fagor fabr.
accessories:
electric magnetic chuck 4000 x 1000 mm
paper filter system
operating instructions
various accessories.

length: 10,700 mm, height: 4100 mm, width: 3500 mm, weight: 42,000 kg

STOCK NUMBER: 3362 FLAT GRINDING MACHINE MANUFACTURER: DANOBAT, TYPE: RT-4000 SP MACHINE NO.: 007, YEAR OF CONSTRUCTION: 1987 SPECIFICATIONS: LOOP AREA 4000 X 1000 MM MM TABLE SIZE 4000 X 1000 MM GRINDING LENGTH 4100 MM GRINDING WIDTH 1100 MM GR. STONE DIAMETER 650 MM GR. STONE WIDTH 200 MM GR. WORKPIECE HEIGHT 1000 MM GRINDING MOTOR 36.8 KW TOTAL POWER 48 KW CNC CONTROL. CONTROL FAGOR FABR. ACCESSORIES: ELECTRIC MAGNETIC CHUCK 4000 X 1000 MM PAPER FILTER SYSTEM OPERATING INSTRUCTIONS VARIOUS ACCESSORIES. LENGTH: 10,700 MM, HEIGHT: 4100 MM, WIDTH: 3500 MM, WEIGHT: 42,000 KG
Vendedor: DenTool LTD
Año de construcción: usado
Ubicación: Land-turning diameter over bed:652 mm<br/>turning diameter over slide:440 mm<br/>turning length:1500 mm<br/>swing diameter over slide rest:440 mm<br/>bed width:350 mm<br/>spindle bore:80 mm<br/>spindle speed:30-1500 (3 stufig)  u/min<br/>spindle taper:a2-8 <br/>longitudinal feeds::0,05-1,5 <br/>cross feeds::0.025 - 0.752 <br/>tailstock quill stroke:200 mm<br/>tailstock quill diameter:95 mm<br/>tailstock quill taper mt:5 mk<br/>tool post size:25x25 mm<br/>power requirement:7,5 kw<br/>weight of the machine ca.:3000 kg<br/>dimensions:3600x1140x1610 mm<br/>dro:2-achsen von fagor <br/>stepless speed: <br/>fixed steady:option <br/>follower rest:option <br/>tool holder:4-fach <br/>: <br/>rapid travel - longitudinal + cross: <br/>european electric: <br/>ce-design: <br/>3 jaw chuck Ø:315 mm<br/>automatic lubrication system: <br/>chip pan: <br/>coolant system: <br/>: <br/>splash guard:am schlitten mit mikroschalter <br/>: <br/>led work light: <br/>: <br/>dead centers: <br/>reducing bush: <br/>: <br/>right hand appron: <br/><br/>factory new l & z lathe with 2-axis digital display f. constant cutting speed and many more.  characteristics: powerful, flexible and productive with an optimal price / performance ratio for the growing requirements of turning shops, toolmakers and other mechanical plants as well as training centers  warranty: 12 months  payment: 100% before loading the machine  fig. shows dlz 325 with further options  made in europe!   for fixed lump sums, we also offer free delivery, including assembly, commissioning, instruction of the operating personnel as well as ready to hand over the machine. service, spare parts supply, the subsequent supply of accessories is also guaranteed by us.  other accessories and models partly from stock or available at short notice.  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us for it. TURNING DIAMETER OVER BED:652 MM
TURNING DIAMETER OVER SLIDE:440 MM
TURNING LENGTH:1500 MM
SWING DIAMETER OVER SLIDE REST:440 MM
BED WIDTH:350 MM
SPINDLE BORE:80 MM
SPINDLE SPEED:30-1500 (3 STUFIG) U/MIN
SPINDLE TAPER:A2-8
LONGITUDINAL FEEDS::0,05-1,5
CROSS FEEDS::0.025 - 0.752
TAILSTOCK QUILL STROKE:200 MM
TAILSTOCK QUILL DIAMETER:95 MM
TAILSTOCK QUILL TAPER MT:5 MK
TOOL POST SIZE:25X25 MM
POWER REQUIREMENT:7,5 KW
WEIGHT OF THE MACHINE CA.:3000 KG
DIMENSIONS:3600X1140X1610 MM
DRO:2-ACHSEN VON FAGOR
STEPLESS SPEED:
FIXED STEADY:OPTION
FOLLOWER REST:OPTION
TOOL HOLDER:4-FACH
:
RAPID TRAVEL - LONGITUDINAL + CROSS:
EUROPEAN ELECTRIC:
CE-DESIGN:
3 JAW CHUCK Ø:315 MM
AUTOMATIC LUBRICATION SYSTEM:
CHIP PAN:
COOLANT SYSTEM:
:
SPLASH GUARD:AM SCHLITTEN MIT MIKROSCHALTER
:
LED WORK LIGHT:
:
DEAD CENTERS:
REDUCING BUSH:
:
RIGHT HAND APPRON:

FACTORY NEW L & Z LATHE WITH 2-AXIS DIGITAL DISPLAY F. CONSTANT CUTTING SPEED AND MANY MORE. CHARACTERISTICS: POWERFUL, FLEXIBLE AND PRODUCTIVE WITH AN OPTIMAL PRICE / PERFORMANCE RATIO FOR THE GROWING REQUIREMENTS OF TURNING SHOPS, TOOLMAKERS AND OTHER MECHANICAL PLANTS AS WELL AS TRAINING CENTERS WARRANTY: 12 MONTHS PAYMENT: 100% BEFORE LOADING THE MACHINE FIG. SHOWS DLZ 325 WITH FURTHER OPTIONS MADE IN EUROPE! FOR FIXED LUMP SUMS, WE ALSO OFFER FREE DELIVERY, INCLUDING ASSEMBLY, COMMISSIONING, INSTRUCTION OF THE OPERATING PERSONNEL AS WELL AS READY TO HAND OVER THE MACHINE. SERVICE, SPARE PARTS SUPPLY, THE SUBSEQUENT SUPPLY OF ACCESSORIES IS ALSO GUARANTEED BY US. OTHER ACCESSORIES AND MODELS PARTLY FROM STOCK OR AVAILABLE AT SHORT NOTICE. BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US FOR IT.
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-coil weight 30,0 t
material width 400 - 1.550 mm
material thickness 0,40-5,00 mm
tensile strength 280 - 600 n / mm²
yield point 150 - 500 kg / qmm
coil inside diameter 508 - 610 mm
coil outside diameter 620 - 2.100 mm
speed 15 - 300 m / min.  COIL WEIGHT 30,0 T MATERIAL WIDTH 400 - 1.550 MM MATERIAL THICKNESS 0,40-5,00 MM TENSILE STRENGTH 280 - 600 N / MM² YIELD POINT 150 - 500 KG / QMM COIL INSIDE DIAMETER 508 - 610 MM COIL OUTSIDE DIAMETER 620 - 2.100 MM SPEED 15 - 300 M / MIN.
Vendedor: Reinhold Schmitt GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 80.000 €
Ubicación: Land-weight approx.: 34000 kg<br/>dimensions (l x w x h) approx.: 4700 x 6000 x 5000 mm<br/>description: <h3>two-column cnc vertical lathe 2.500 mm - completely reconditioned</h3> <br> <br> - vertical ram stroke: 950 mm<br> - maximum turning diameter: 2.500 mm<br> - platform diameter: 2.250 mm<br> - maximum turning height: 2.000 mm<br> - loading capacity: 16 ton<br> - spindle rotation (rpm): min 5 - max 110<br> - main motor power: 55 kw direct current<br> - high precision recirculating ball screws with double pre-loaded cochlea - nr 4 independent brushless motors with continuous adjustment of feeds (from 0 to 10.000 m / min)<br> - platform with hydrostatic support<br> - nr 4 hydraulic clamps (pliers) <b>installation of a new cnc according to the end customers instruction (siemens, fagor, ect.)<i>currently not yet installed</i></b> WEIGHT APPROX.: 34000 KG
DIMENSIONS (L X W X H) APPROX.: 4700 X 6000 X 5000 MM
DESCRIPTION:

TWO-COLUMN CNC VERTICAL LATHE 2.500 MM - COMPLETELY RECONDITIONED



- VERTICAL RAM STROKE: 950 MM
- MAXIMUM TURNING DIAMETER: 2.500 MM
- PLATFORM DIAMETER: 2.250 MM
- MAXIMUM TURNING HEIGHT: 2.000 MM
- LOADING CAPACITY: 16 TON
- SPINDLE ROTATION (RPM): MIN 5 - MAX 110
- MAIN MOTOR POWER: 55 KW DIRECT CURRENT
- HIGH PRECISION RECIRCULATING BALL SCREWS WITH DOUBLE PRE-LOADED COCHLEA - NR 4 INDEPENDENT BRUSHLESS MOTORS WITH CONTINUOUS ADJUSTMENT OF FEEDS (FROM 0 TO 10.000 M / MIN)
- PLATFORM WITH HYDROSTATIC SUPPORT
- NR 4 HYDRAULIC CLAMPS (PLIERS) INSTALLATION OF A NEW CNC ACCORDING TO THE END CUSTOMERS INSTRUCTION (SIEMENS, FAGOR, ECT.)CURRENTLY NOT YET INSTALLED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-l + z lathe weiler matador vs 2
04-03-239
shipping time: on request

number: 04-03-239

manufacturer: weiler
type: matador vs 2

machine data
year of construction: approx. 1985
l x w x h: approx. 1500 x 800 x 1500 mm
weight: approx. 550 kg

good general condition

technical data
digital display (plan & o sled): 2 - axes - digital display (fagor)

dimensions:
maximum turning diameter over bed: approx. ã? 280 mm

maximum turning diameter over support: approx. ã? 160 mm

maximum turning length: 500 mm

bar passage: approx. ã? 36 mm

spindle:
speed range: approx. 15-3550 rpm

spindle nose: a 2 - 5

power: approx. 3,0 kw

automatic longitudinal & plan vorschuebe:
feed range: 0.005 1,184 mm / rev

suitable for threads: - metric 0.25-12 mm

"- inch 80-2 gg /"

-diametral - pitch threaded 160-6 dp

-module 0.1-4

tailstock: mk 3

accessories
â?¢ clamping collet fixture 386 s

â?¢ various collets

â?¢ quick change toolpost + 3 inserts

â?¢ work light

â?¢ complete machine documentation

â?¢ drill chuck for tailstock

tip â?¢ ongoing with for tailstock

â?¢ various wrenches

â?¢ motor with motor brake (brake)

other accessories on request
price and other specifications on request L + Z LATHE WEILER MATADOR VS 2 04-03-239 SHIPPING TIME: ON REQUEST NUMBER: 04-03-239 MANUFACTURER: WEILER TYPE: MATADOR VS 2 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1985 L X W X H: APPROX. 1500 X 800 X 1500 MM WEIGHT: APPROX. 550 KG GOOD GENERAL CONDITION TECHNICAL DATA DIGITAL DISPLAY (PLAN & O SLED): 2 - AXES - DIGITAL DISPLAY (FAGOR) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 280 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 160 MM MAXIMUM TURNING LENGTH: 500 MM BAR PASSAGE: APPROX. &ATILDE;? 36 MM SPINDLE: SPEED RANGE: APPROX. 15-3550 RPM SPINDLE NOSE: A 2 - 5 POWER: APPROX. 3,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: 0.005 1,184 MM / REV SUITABLE FOR THREADS: - METRIC 0.25-12 MM "- INCH 80-2 GG /" -DIAMETRAL - PITCH THREADED 160-6 DP -MODULE 0.1-4 TAILSTOCK: MK 3 ACCESSORIES &ACIRC;?&CENT; CLAMPING COLLET FIXTURE 386 S &ACIRC;?&CENT; VARIOUS COLLETS &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; WORK LIGHT &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; DRILL CHUCK FOR TAILSTOCK TIP &ACIRC;?&CENT; ONGOING WITH FOR TAILSTOCK &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MOTOR WITH MOTOR BRAKE (BRAKE) OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 49.000 €
Ubicación: Land-weight approx.: 21000 kg<br/>dimensions (l x w x h) approx.: 14000 x 2500 x 2000 mm<br/>description: swing over bed 920 mm, over support 460 mm, turning length 10000 mm, spindle bore 120 mm, speed range 1120 rpm, feed rate 6000 mm/min, work load 5000 kg, power 37 kw, fagor 8055 t in 2-axes, chip conveyor WEIGHT APPROX.: 21000 KG
DIMENSIONS (L X W X H) APPROX.: 14000 X 2500 X 2000 MM
DESCRIPTION: SWING OVER BED 920 MM, OVER SUPPORT 460 MM, TURNING LENGTH 10000 MM, SPINDLE BORE 120 MM, SPEED RANGE 1120 RPM, FEED RATE 6000 MM/MIN, WORK LOAD 5000 KG, POWER 37 KW, FAGOR 8055 T IN 2-AXES, CHIP CONVEYOR
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-overview
brand: graphimet
model: a-2
application type: milling 
machine type: milling machines 
availability: immediately 
production year: 1999
location: spain
origin country: spain 
production hours: 7000

general data
measurements width: 985 mm 
measurements depth: 792 mm 
measurements height: 1837 mm 
machine weight: 700 kg

control unit
brand: fagor
model: 8025-m
cnc main language: spanish

main drive
number of spindles: 1
spindle speed range: 3000-25000 rpm

movement
x-axis movement: 330 mm 
y-axis movement: 190 mm 
z-axis movement: 280 mm

workpiece
workpiece weight: 200 kg

table
outer length: 440 mm 
outer width: 250 mm

tools
max tool diameter: 10 mm

media
main electronic connection: 380 v / 50 hz

see full technical specifications of this machine at:
abc://bit.ly/2aztsri OVERVIEW BRAND: GRAPHIMET MODEL: A-2 APPLICATION TYPE: MILLING MACHINE TYPE: MILLING MACHINES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1999 LOCATION: SPAIN ORIGIN COUNTRY: SPAIN PRODUCTION HOURS: 7000 GENERAL DATA MEASUREMENTS WIDTH: 985 MM MEASUREMENTS DEPTH: 792 MM MEASUREMENTS HEIGHT: 1837 MM MACHINE WEIGHT: 700 KG CONTROL UNIT BRAND: FAGOR MODEL: 8025-M CNC MAIN LANGUAGE: SPANISH MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 3000-25000 RPM MOVEMENT X-AXIS MOVEMENT: 330 MM Y-AXIS MOVEMENT: 190 MM Z-AXIS MOVEMENT: 280 MM WORKPIECE WORKPIECE WEIGHT: 200 KG TABLE OUTER LENGTH: 440 MM OUTER WIDTH: 250 MM TOOLS MAX TOOL DIAMETER: 10 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V / 50 HZ SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2AZTSRI
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 3.400 €
Ubicación: Land-weight approx.: 3900 kg<br/>dimensions (l x w x h) approx.: 4000 x 2400 x 2400 mm<br/>description: cap 510 over bed, 300 over support, tdc 1500 mm, bore 77 mm, speeds 2500, fagor 8055 control, without chuck, incl. steady rest WEIGHT APPROX.: 3900 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 2400 X 2400 MM
DESCRIPTION: CAP 510 OVER BED, 300 OVER SUPPORT, TDC 1500 MM, BORE 77 MM, SPEEDS 2500, FAGOR 8055 CONTROL, WITHOUT CHUCK, INCL. STEADY REST
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-features: processing diameter: up to 250mm
milling length: up to 4000 mm
maximum diameter of the workpiece: 450 mm
thread length: 4000 mm
thread pitch: 2-1000 mm
workpiece diameter to be machined on the saddle: 320 mm
bore spindle: 123 mm
number of teeth: 4-100
cone tool: iso 50
advancements (longitudinal): 0.4 to 1600 mm / min
rapid traverse: 4000 mm / min
of rotational speed range - spindle of the workpiece: 0.004 to 80 u / min
main drive: 11 kw
electrical system: voltage / frequency: 380/50 v / hz
cnc fagor FEATURES: PROCESSING DIAMETER: UP TO 250MM MILLING LENGTH: UP TO 4000 MM MAXIMUM DIAMETER OF THE WORKPIECE: 450 MM THREAD LENGTH: 4000 MM THREAD PITCH: 2-1000 MM WORKPIECE DIAMETER TO BE MACHINED ON THE SADDLE: 320 MM BORE SPINDLE: 123 MM NUMBER OF TEETH: 4-100 CONE TOOL: ISO 50 ADVANCEMENTS (LONGITUDINAL): 0.4 TO 1600 MM / MIN RAPID TRAVERSE: 4000 MM / MIN OF ROTATIONAL SPEED RANGE - SPINDLE OF THE WORKPIECE: 0.004 TO 80 U / MIN MAIN DRIVE: 11 KW ELECTRICAL SYSTEM: VOLTAGE / FREQUENCY: 380/50 V / HZ CNC FAGOR
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-x-travel: 420 mm<br/>y-travel: 200 mm<br/>z-travel: 330 mm<br/>spindle taper: sk 40 <br/>table load: 200 kg<br/>carrier height until: 16: 11,2 - 355 mm/min.<br/>spindle turning speed range: 16: 56 - 1800 u/min<br/>table surface area: 710 x 315 mm<br/>dimensions (l/w/h): 1,6 x 1,3 x 2 m<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 1,3 t<br/>dimensions of the machine ca.:  m<br/>electric 380 volt:  <br/>3-axis digital readout: fagor <br/>cooling equipment:  <br/>central lubrication:  <br/>dealer with own stock of 2500 m².<br/><br/><br/><br/><br/> X-TRAVEL: 420 MM
Y-TRAVEL: 200 MM
Z-TRAVEL: 330 MM
SPINDLE TAPER: SK 40
TABLE LOAD: 200 KG
CARRIER HEIGHT UNTIL: 16: 11,2 - 355 MM/MIN.
SPINDLE TURNING SPEED RANGE: 16: 56 - 1800 U/MIN
TABLE SURFACE AREA: 710 X 315 MM
DIMENSIONS (L/W/H): 1,6 X 1,3 X 2 M
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 1,3 T
DIMENSIONS OF THE MACHINE CA.: M
ELECTRIC 380 VOLT:
3-AXIS DIGITAL READOUT: FAGOR
COOLING EQUIPMENT:
CENTRAL LUBRICATION:
DEALER WITH OWN STOCK OF 2500 M².




Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 12.000 €
Ubicación: Land-control heidenhain 426
general data:
dimensions width 3750 mm
dimensions depth 2800 mm
dimensions height 2400 mm
machine weight 6500 kg

control unit
fagor brand
model 8025

main drive
number of spindles 1
spindle speed range 6000 1/min
bcy72lug
spindle motor 11 kw
bdpao7uzpi
tool taper iso 40

movement
x axis movement 1068 mm
x-axis overdrive 18000 mm / m
y-axis movement 534 mm
y-axis overdrive 18000 mm / m
move the z-axis 510 mm
z axis quick wash 18000 mm / m

tischabmessung
outer length 1300 mm
outer width 534 mm
tool holder sk 50
connection 380 v / 50 hz a

additional equipment
chip conveyor machine dimensions:
b 3800 (4200) x t h 2800 x 2800 mm
 CONTROL HEIDENHAIN 426 GENERAL DATA: DIMENSIONS WIDTH 3750 MM DIMENSIONS DEPTH 2800 MM DIMENSIONS HEIGHT 2400 MM MACHINE WEIGHT 6500 KG CONTROL UNIT FAGOR BRAND MODEL 8025 MAIN DRIVE NUMBER OF SPINDLES 1 SPINDLE SPEED RANGE 6000 1/MIN BCY72LUG SPINDLE MOTOR 11 KW BDPAO7UZPI TOOL TAPER ISO 40 MOVEMENT X AXIS MOVEMENT 1068 MM X-AXIS OVERDRIVE 18000 MM / M Y-AXIS MOVEMENT 534 MM Y-AXIS OVERDRIVE 18000 MM / M MOVE THE Z-AXIS 510 MM Z AXIS QUICK WASH 18000 MM / M TISCHABMESSUNG OUTER LENGTH 1300 MM OUTER WIDTH 534 MM TOOL HOLDER SK 50 CONNECTION 380 V / 50 HZ A ADDITIONAL EQUIPMENT CHIP CONVEYOR MACHINE DIMENSIONS: B 3800 (4200) X T H 2800 X 2800 MM
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 15.900 €
Ubicación: Land-weight approx.: 13500 kg<br/>x-travel: 1000 mm<br/>y-travel: 500 mm<br/>z-travel: 600 mm<br/>control: cnc fanuc 21 im <br/>dimensions (l x w x h) approx.: 9000 x 2550 x 2900 mm<br/>toolchanger positions: 30 <br/>taper: iso 40 <br/>turning speed range: 10000 rpm<br/>rapid traverse: 30 m/1` m/min<br/>table surface area l x w : 900 x 450 mm<br/>total power requirement: 22 kw<br/>description: <b><u>rmt kompakt kp.10 p vertical machining center</u></b><br> - control unit: cnc fanuc 21 i - m - serial number: kp 1010 - manufacturing year: 2002<br> - x-axis: 1000 mm - y-axis: 500 mm - z-axis: 600 mm - maximum distance between spindle and worktable: 700 mm - surface of the worktable: 900 mm x 450 mm - cooling system: sacemi type imm80b- p530 - optical messuring system: x, y, z brand fagor mark - tool magazine: 30 - tool holder: iso 40 - maximum revolution speed: 10000 rpm <b>- the machine is dismantled, you don´t need a special transport!</b> WEIGHT APPROX.: 13500 KG
X-TRAVEL: 1000 MM
Y-TRAVEL: 500 MM
Z-TRAVEL: 600 MM
CONTROL: CNC FANUC 21 IM
DIMENSIONS (L X W X H) APPROX.: 9000 X 2550 X 2900 MM
TOOLCHANGER POSITIONS: 30
TAPER: ISO 40
TURNING SPEED RANGE: 10000 RPM
RAPID TRAVERSE: 30 M/1` M/MIN
TABLE SURFACE AREA L X W : 900 X 450 MM
TOTAL POWER REQUIREMENT: 22 KW
DESCRIPTION: RMT KOMPAKT KP.10 P VERTICAL MACHINING CENTER
- CONTROL UNIT: CNC FANUC 21 I - M - SERIAL NUMBER: KP 1010 - MANUFACTURING YEAR: 2002
- X-AXIS: 1000 MM - Y-AXIS: 500 MM - Z-AXIS: 600 MM - MAXIMUM DISTANCE BETWEEN SPINDLE AND WORKTABLE: 700 MM - SURFACE OF THE WORKTABLE: 900 MM X 450 MM - COOLING SYSTEM: SACEMI TYPE IMM80B- P530 - OPTICAL MESSURING SYSTEM: X, Y, Z BRAND FAGOR MARK - TOOL MAGAZINE: 30 - TOOL HOLDER: ISO 40 - MAXIMUM REVOLUTION SPEED: 10000 RPM - THE MACHINE IS DISMANTLED, YOU DON´T NEED A SPECIAL TRANSPORT!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-swing over bed: 530 mm maximum turning length: 1520 mm swing diameter over support: 265 mmdie machine is in good technical condition, after prior arrangement option that combines. cnc lathe tnc 530l hydraulic turret with 8 positions. spindle 80 mm chuck 10 inch, manual spindle speed max. 2000 u / min with spindle cooling (tnc 530 refrigerator) transmission 4 pcs cnc tailgate hand hydraulic cone mt5 spindle power 11 kw, fagor fagor control system 8055ifcl-tc with teach in control equipment:-fixed bezel, movable bezel adapter for rear chuck 4 jaws rear faceplate 12 inch  SWING OVER BED: 530 MM MAXIMUM TURNING LENGTH: 1520 MM SWING DIAMETER OVER SUPPORT: 265 MMDIE MACHINE IS IN GOOD TECHNICAL CONDITION, AFTER PRIOR ARRANGEMENT OPTION THAT COMBINES. CNC LATHE TNC 530L HYDRAULIC TURRET WITH 8 POSITIONS. SPINDLE 80 MM CHUCK 10 INCH, MANUAL SPINDLE SPEED MAX. 2000 U / MIN WITH SPINDLE COOLING (TNC 530 REFRIGERATOR) TRANSMISSION 4 PCS CNC TAILGATE HAND HYDRAULIC CONE MT5 SPINDLE POWER 11 KW, FAGOR FAGOR CONTROL SYSTEM 8055IFCL-TC WITH TEACH IN CONTROL EQUIPMENT:-FIXED BEZEL, MOVABLE BEZEL ADAPTER FOR REAR CHUCK 4 JAWS REAR FACEPLATE 12 INCH
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 37.910 €
Ubicación: Land-: 300 mm<br/>: 600 mm<br/>: 400 mm<br/>: 800 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 8 nr<br/>: 80 mm<br/>: 90 m<br/>: 15 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.600 mm<br/>: 1.500 mm<br/>: 1.650 mm<br/>: 3.100 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.000 mm ? 35.700,-   turning length 1.500 mm ? 36.530,-   turning length 3.000 mm ? 41.620,-   turning length 4.000 mm ? 45.800,-   turning length 5.000 mm ? 56.440,-   <br/><br/><br/><br/><br/>center height: 300 mm<br/>swing over bed: 600 mm<br/>swing over cross slide: 400 mm<br/>swing in gap: 800 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 8 <br/>spindle bore: 80 mm<br/>spindle taper: mt90<br/>spindle speeds (infinitely variable in 3 subranges): 8-62, 62-500, 250-2.000 rpm<br/>main motor power: 15 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,02 ? 12 mm/u<br/>cross feed range: 0,01 ? 6 mm/u<br/>number of threads: 80<br/>metric thread range: 0,25 - 120 mm<br/>inch thread rangel: 120 - 1/4 tpi<br/>module thread range: 0,0625 - 30<br/>dp thread range: 480 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>length: 3.600 mm<br/>width: 1.500 mm<br/>height: 1.650 mm<br/>weight: 3.100 kg<br/><br/><br/><br/> : 300 MM
: 600 MM
: 400 MM
: 800 MM
: 400 MM
: 2.000 MM
: . 8 NR
: 80 MM
: 90 M
: 15 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.600 MM
: 1.500 MM
: 1.650 MM
: 3.100 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.000 MM ? 35.700,- TURNING LENGTH 1.500 MM ? 36.530,- TURNING LENGTH 3.000 MM ? 41.620,- TURNING LENGTH 4.000 MM ? 45.800,- TURNING LENGTH 5.000 MM ? 56.440,-




CENTER HEIGHT: 300 MM
SWING OVER BED: 600 MM
SWING OVER CROSS SLIDE: 400 MM
SWING IN GAP: 800 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLE BORE: 80 MM
SPINDLE TAPER: MT90
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 8-62, 62-500, 250-2.000 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,02 ? 12 MM/U
CROSS FEED RANGE: 0,01 ? 6 MM/U
NUMBER OF THREADS: 80
METRIC THREAD RANGE: 0,25 - 120 MM
INCH THREAD RANGEL: 120 - 1/4 TPI
MODULE THREAD RANGE: 0,0625 - 30
DP THREAD RANGE: 480 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
LENGTH: 3.600 MM
WIDTH: 1.500 MM
HEIGHT: 1.650 MM
WEIGHT: 3.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 18.000 €
Ubicación: Land-universal milling machine with automatic movement ram.
table size: 1525mmx325mm.
longitudinal travel: 1050mm.
cross travel: 330mm.
vertical travel: 475mm.
ram travel: 550mm.
iso40.
hure head.
dro fagor for 3 axis.
motor power: 7,5hp.
ce.
year: 2006 UNIVERSAL MILLING MACHINE WITH AUTOMATIC MOVEMENT RAM. TABLE SIZE: 1525MMX325MM. LONGITUDINAL TRAVEL: 1050MM. CROSS TRAVEL: 330MM. VERTICAL TRAVEL: 475MM. RAM TRAVEL: 550MM. ISO40. HURE HEAD. DRO FAGOR FOR 3 AXIS. MOTOR POWER: 7,5HP. CE. YEAR: 2006
Vendedor: Maquinaria Industrial Donosti Sl
Año de construcción: usado
Precio: 86.000 €
Ubicación: Land-: 400 mm<br/>: 890 mm<br/>: 490 mm<br/>: 1.050 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 7.500 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/><br/>   turning length 1.500 mm  ? 69.050,-   turning length 3.000 mm  ? 75.400,-   turning length 5.000 mm  ? 91.370,-   turning length 6.000 mm  ? 108.890,-   <br/><br/>entre height: 400 mm<br/>swing over bed: 890 mm<br/>swing over cross slide: 490 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 ? 38,9 mm/r<br/>cross feed range: 0,016 ? 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	260 mm<br/>weight approx.: 7.500 kg<br/><br/><br/><br/> : 400 MM
: 890 MM
: 490 MM
: 1.050 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 7.500 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)


TURNING LENGTH 1.500 MM  ? 69.050,- TURNING LENGTH 3.000 MM  ? 75.400,- TURNING LENGTH 5.000 MM  ? 91.370,- TURNING LENGTH 6.000 MM  ? 108.890,-

ENTRE HEIGHT: 400 MM
SWING OVER BED: 890 MM
SWING OVER CROSS SLIDE: 490 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 ? 38,9 MM/R
CROSS FEED RANGE: 0,016 ? 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 7.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview
brand: style
model: 1100vs
application type: turning 
machine type: lathes 
availability: immediately 
production year: 2009
location: the netherlands 
origin country: the netherlands 
production hours: 4500

general data
measurements width: 8500 mm 
measurements depth: 2700 mm 
measurements height: 2200 mm 
machine weight: 16000

control unit
brand: fagor
model: ch 596
cnc main language: english 
cnc language customizable: yes

main drive
number of spindles: 1 
spindle speed range: 6000

movement
x-axis movement: 1100 mm 
y-axis movement: 740 mm 
z-axis movement: 550 mm

turret
number of turrets: 1

tools
max tool diameter: 60 mm 
max tool length: 165 mm

media
main electronic connection: 400 v

see full technical specifications of this machine at:
abc://bit.ly/2onlsvh OVERVIEW BRAND: STYLE MODEL: 1100VS APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2009 LOCATION: THE NETHERLANDS ORIGIN COUNTRY: THE NETHERLANDS PRODUCTION HOURS: 4500 GENERAL DATA MEASUREMENTS WIDTH: 8500 MM MEASUREMENTS DEPTH: 2700 MM MEASUREMENTS HEIGHT: 2200 MM MACHINE WEIGHT: 16000 CONTROL UNIT BRAND: FAGOR MODEL: CH 596 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 6000 MOVEMENT X-AXIS MOVEMENT: 1100 MM Y-AXIS MOVEMENT: 740 MM Z-AXIS MOVEMENT: 550 MM TURRET NUMBER OF TURRETS: 1 TOOLS MAX TOOL DIAMETER: 60 MM MAX TOOL LENGTH: 165 MM MEDIA MAIN ELECTRONIC CONNECTION: 400 V SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2ONLSVH
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 16.630 €
Ubicación: Land-: 165 mm<br/>: 400 mm<br/>: 190 mm<br/>: 440 mm<br/>: 200 mm<br/>: 750 mm<br/>: . 5 nr<br/>: 32 mm<br/>: 4,5 mk<br/>: 2,2 kw<br/>: 150 mm<br/>: 95 mm<br/>: 40 mm<br/>: 3 mk<br/>: 100 mm<br/>: 770 kg<br/>driven by variable speed control (2 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 160 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/>   turning length 1.000 mm ? 17.450,-   <br/><br/>center height: 165 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 190 mm<br/>swing in gap: 440 mm<br/>width of bed: 200 mm<br/>distance between centers: 750 mm<br/>spindle nose / din55027: no. 5<br/>spindle bore: 32 mm<br/>spindle taper: mt 4,5<br/>spindle speeds (infinitely variable in 2 subranges): 85 - 405, 470 - 2.200 r/min<br/>main motor power: 2,2 kw<br/>number of feeds: 48<br/>longitudinal feed range: 0,006 ? 1,77 mm/r<br/>cross feed range: 0,003 ? 0,885 mm/r<br/>number of threads:<br/>metric thread range (48): 0,1 - 285 mm<br/>inch thread rangel (53): 75 - 2,5 tpi<br/>module thread range (19): 0,1 - 1,75<br/>dp thread range (19): 70 - 4<br/>cross slide travel: 150 mm<br/>top slide travel: 95 mm<br/>tailstock quill diameter: 40 mm<br/>tailstock quill taper: mk 3<br/>tailstock travel: 100 mm<br/>weight approx.: 770 kg<br/><br/><br/><br/> : 165 MM
: 400 MM
: 190 MM
: 440 MM
: 200 MM
: 750 MM
: . 5 NR
: 32 MM
: 4,5 MK
: 2,2 KW
: 150 MM
: 95 MM
: 40 MM
: 3 MK
: 100 MM
: 770 KG
DRIVEN BY VARIABLE SPEED CONTROL (2 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 160 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

TURNING LENGTH 1.000 MM ? 17.450,-

CENTER HEIGHT: 165 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 190 MM
SWING IN GAP: 440 MM
WIDTH OF BED: 200 MM
DISTANCE BETWEEN CENTERS: 750 MM
SPINDLE NOSE / DIN55027: NO. 5
SPINDLE BORE: 32 MM
SPINDLE TAPER: MT 4,5
SPINDLE SPEEDS (INFINITELY VARIABLE IN 2 SUBRANGES): 85 - 405, 470 - 2.200 R/MIN
MAIN MOTOR POWER: 2,2 KW
NUMBER OF FEEDS: 48
LONGITUDINAL FEED RANGE: 0,006 ? 1,77 MM/R
CROSS FEED RANGE: 0,003 ? 0,885 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (48): 0,1 - 285 MM
INCH THREAD RANGEL (53): 75 - 2,5 TPI
MODULE THREAD RANGE (19): 0,1 - 1,75
DP THREAD RANGE (19): 70 - 4
CROSS SLIDE TRAVEL: 150 MM
TOP SLIDE TRAVEL: 95 MM
TAILSTOCK QUILL DIAMETER: 40 MM
TAILSTOCK QUILL TAPER: MK 3
TAILSTOCK TRAVEL: 100 MM
WEIGHT APPROX.: 770 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-turret milling machine.
table: 1220x300mm.
longitudinal travel: 914mm.
cross travel: 382mm.
vertical travel: 419mm
variable speed head.
speeds: 60-500/500-4000rpm
iso40. 
power: 2 hp.
dro fagor.  TURRET MILLING MACHINE. TABLE: 1220X300MM. LONGITUDINAL TRAVEL: 914MM. CROSS TRAVEL: 382MM. VERTICAL TRAVEL: 419MM VARIABLE SPEED HEAD. SPEEDS: 60-500/500-4000RPM ISO40. POWER: 2 HP. DRO FAGOR.
Vendedor: Maquinaria Industrial Donosti Sl
Año de construcción: usado
Precio: 62.440 €
Ubicación: Land-: 430 mm<br/>: 860 mm<br/>: 620 mm<br/>: 1.050 mm<br/>: 560 mm<br/>: 1.500 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 15 kw<br/>: 435 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.650 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/> <br/>   turning length 1.500 mm ? 52.210,-   turning length 2.000 mm ? 54.390,-   turning length 4.000 mm ? 68.730,-   turning length 5.000 mm ? 77.860,-   turning length 6.000 mm ? 87.640,-   <br/><br/>centre height: 430 mm<br/>swing over bed: 860 mm<br/>swing over cross slide: 620 mm<br/>swing in gap: 1.050 mm<br/>width of bed: 560 mm<br/>distance between centers: 	1.500 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>spindle speeds (infinitely variable in 3 subranges): 7 - 42, 28 - 170, 165 - 1.015 rpm<br/>main motor power: 15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 ? 18 mm/r<br/>cross feed range: 0,02 ? 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76):  0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 435 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 	225 mm<br/>weight approx.: 4.650 kg<br/><br/><br/><br/> : 430 MM
: 860 MM
: 620 MM
: 1.050 MM
: 560 MM
: 1.500 MM
: . 11 NR
: 132 MM
: 140 M
: 15 KW
: 435 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.650 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

 
TURNING LENGTH 1.500 MM ? 52.210,- TURNING LENGTH 2.000 MM ? 54.390,- TURNING LENGTH 4.000 MM ? 68.730,- TURNING LENGTH 5.000 MM ? 77.860,- TURNING LENGTH 6.000 MM ? 87.640,-

CENTRE HEIGHT: 430 MM
SWING OVER BED: 860 MM
SWING OVER CROSS SLIDE: 620 MM
SWING IN GAP: 1.050 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 7 - 42, 28 - 170, 165 - 1.015 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 ? 18 MM/R
CROSS FEED RANGE: 0,02 ? 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 435 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.650 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: geka
model: alps-150
application type: shearing
machine type: shearing machine
availability: immediately
construction year: 2008
production hours: 400
location: lithuania
origin country: spain

general data:
measurements width: 2200 mm
measurements depth: 1350 mm
measurements height: 2400 mm
machine weight: 5000 kg

main drive:
shearing force: 2500 kn

control unit:
brand: fagor
model: cnc 8070
cnc main language: english
cnc language customizable: yes

workpiece:
workpiece x: 15000 mm
workpiece y: 160 mm
workpiece z: 200 mm
workpiece weight: 400 kg

max material thickness:
steel: 16 mm

media:
main electronic connection: 50 hz / 3 p

additional equipment:
1 - 3x loading table
2 - 3x side loading table
3 - 3x unloading table OVERVIEW: BRAND: GEKA MODEL: ALPS-150 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2008 PRODUCTION HOURS: 400 LOCATION: LITHUANIA ORIGIN COUNTRY: SPAIN GENERAL DATA: MEASUREMENTS WIDTH: 2200 MM MEASUREMENTS DEPTH: 1350 MM MEASUREMENTS HEIGHT: 2400 MM MACHINE WEIGHT: 5000 KG MAIN DRIVE: SHEARING FORCE: 2500 KN CONTROL UNIT: BRAND: FAGOR MODEL: CNC 8070 CNC MAIN LANGUAGE: ENGLISH CNC LANGUAGE CUSTOMIZABLE: YES WORKPIECE: WORKPIECE X: 15000 MM WORKPIECE Y: 160 MM WORKPIECE Z: 200 MM WORKPIECE WEIGHT: 400 KG MAX MATERIAL THICKNESS: STEEL: 16 MM MEDIA: MAIN ELECTRONIC CONNECTION: 50 HZ / 3 P ADDITIONAL EQUIPMENT: 1 - 3X LOADING TABLE 2 - 3X SIDE LOADING TABLE 3 - 3X UNLOADING TABLE
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 99.570 €
Ubicación: Land-: 500 mm<br/>: 1.090 mm<br/>: 690 mm<br/>: 1.250 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 525 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.050 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm  ? 77.250,-   turning length 3.000 mm  ? 83.600,-   turning length 4.000 mm  ? 94.200,-   turning length 6.000 mm  ? 117.090,-   <br/><br/>entre height: 500 mm<br/>swing over bed: 1.090 mm<br/>swing over cross slide: 690 mm<br/>swing in gap: 1.250 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 ? 38,9 mm/r<br/>cross feed range: 0,016 ? 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.050 kg<br/><br/><br/><br/> : 500 MM
: 1.090 MM
: 690 MM
: 1.250 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 525 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.050 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM  ? 77.250,- TURNING LENGTH 3.000 MM  ? 83.600,- TURNING LENGTH 4.000 MM  ? 94.200,- TURNING LENGTH 6.000 MM  ? 117.090,-

ENTRE HEIGHT: 500 MM
SWING OVER BED: 1.090 MM
SWING OVER CROSS SLIDE: 690 MM
SWING IN GAP: 1.250 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 ? 38,9 MM/R
CROSS FEED RANGE: 0,016 ? 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.050 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: wagner
model: fcq 1635
application type: milling
machine type: milling machine
availability: immediately
construction year: 2006
production hours: 7200
location: italy
origin country: taiwan

general data:
measurements width: 2620 mm
measurements depth: 2125 mm
measurements height: 1965 mm
machine weight: 3200 kg

main drive:
number of spindle: 1 
spindle speed range: 30-2050 1/min

control unit:
brand: fagor

movement:
x-axis movement: 1000 mm
y-axis movement: 650 mm
z-axis movement: 470 mm

table:
outer length: 460 mm
outer width: 1635 mm

additional equipment:
1 - crankcase
2 - side protections OVERVIEW: BRAND: WAGNER MODEL: FCQ 1635 APPLICATION TYPE: MILLING MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2006 PRODUCTION HOURS: 7200 LOCATION: ITALY ORIGIN COUNTRY: TAIWAN GENERAL DATA: MEASUREMENTS WIDTH: 2620 MM MEASUREMENTS DEPTH: 2125 MM MEASUREMENTS HEIGHT: 1965 MM MACHINE WEIGHT: 3200 KG MAIN DRIVE: NUMBER OF SPINDLE: 1 SPINDLE SPEED RANGE: 30-2050 1/MIN CONTROL UNIT: BRAND: FAGOR MOVEMENT: X-AXIS MOVEMENT: 1000 MM Y-AXIS MOVEMENT: 650 MM Z-AXIS MOVEMENT: 470 MM TABLE: OUTER LENGTH: 460 MM OUTER WIDTH: 1635 MM ADDITIONAL EQUIPMENT: 1 - CRANKCASE 2 - SIDE PROTECTIONS
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 21.940 €
Ubicación: Land-: 200 mm<br/>: 400 mm<br/>: 235 mm<br/>: 550 mm<br/>: 320 mm<br/>: 1.000 mm<br/>: . 6 nr<br/>: 52 mm<br/>: 6 mk<br/>: 4 kw<br/>: 235 mm<br/>: 110 mm<br/>: 50 mm<br/>: 4 mk<br/>: 100 mm<br/>: 2.750 mm<br/>: 1.100 mm<br/>: 1.600 mm<br/>: 1.540 kg<br/>driven by manual transmission<br/>3-axes digital readout fagor<br/>quick change toolpost multisuisse with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 200 mm<br/>spindle nose nr. 6 din 55027<br/>four way rapid traverse device<br/>spindle dead center<br/>coolant equipment<br/>removable bridge<br/>1 pce. flange plate for lathe chuck Ø 200 mm<br/>1 adapter sleeve<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/><br/>   turning length 750 mm ? 21.540,-   turning length 1.500 mm ? 22.900,-   <br/><br/> <br/><br/>center height: 200 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 235 mm<br/>swing in gap: 550 mm<br/>width of bed: 320 mm<br/>distance between centers: 1.000 mm<br/>spindle nose / din55027: no. 6<br/>spindle bore: 52 mm<br/>spindle taper: mt 6<br/>spindle speeds (12): 50?2.240 rpm<br/>main motor power: 4 kw<br/>number of feeds: 80<br/>longitudinal feed range: 0,015 ? 0,6 mm/u<br/>cross feed range: 0,0075 ? 0,3 mm/u<br/>number of threads: 40<br/>metric thread range: 0,25 - 7,5 mm<br/>inch thread rangel: 120 - 4 tpi<br/>module thread range: 0,0625 - 1,875<br/>dp thread range: 480 - 16<br/>cross slide travel: 235 mm<br/>top slide travel: 110 mm<br/>tailstock quill diameter: 50 mm<br/>tailstock quill taper: mk 4<br/>tailstock travel: 100 mm<br/>length: 2.750 mm<br/>width: 1.100 mm<br/>height: 1.600 mm<br/>weight approx.: 1.540 kg<br/><br/><br/><br/> : 200 MM
: 400 MM
: 235 MM
: 550 MM
: 320 MM
: 1.000 MM
: . 6 NR
: 52 MM
: 6 MK
: 4 KW
: 235 MM
: 110 MM
: 50 MM
: 4 MK
: 100 MM
: 2.750 MM
: 1.100 MM
: 1.600 MM
: 1.540 KG
DRIVEN BY MANUAL TRANSMISSION
3-AXES DIGITAL READOUT FAGOR
QUICK CHANGE TOOLPOST MULTISUISSE WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 200 MM
SPINDLE NOSE NR. 6 DIN 55027
FOUR WAY RAPID TRAVERSE DEVICE
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
REMOVABLE BRIDGE
1 PCE. FLANGE PLATE FOR LATHE CHUCK Ø 200 MM
1 ADAPTER SLEEVE
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 750 MM ? 21.540,- TURNING LENGTH 1.500 MM ? 22.900,-



CENTER HEIGHT: 200 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 235 MM
SWING IN GAP: 550 MM
WIDTH OF BED: 320 MM
DISTANCE BETWEEN CENTERS: 1.000 MM
SPINDLE NOSE / DIN55027: NO. 6
SPINDLE BORE: 52 MM
SPINDLE TAPER: MT 6
SPINDLE SPEEDS (12): 50?2.240 RPM
MAIN MOTOR POWER: 4 KW
NUMBER OF FEEDS: 80
LONGITUDINAL FEED RANGE: 0,015 ? 0,6 MM/U
CROSS FEED RANGE: 0,0075 ? 0,3 MM/U
NUMBER OF THREADS: 40
METRIC THREAD RANGE: 0,25 - 7,5 MM
INCH THREAD RANGEL: 120 - 4 TPI
MODULE THREAD RANGE: 0,0625 - 1,875
DP THREAD RANGE: 480 - 16
CROSS SLIDE TRAVEL: 235 MM
TOP SLIDE TRAVEL: 110 MM
TAILSTOCK QUILL DIAMETER: 50 MM
TAILSTOCK QUILL TAPER: MK 4
TAILSTOCK TRAVEL: 100 MM
LENGTH: 2.750 MM
WIDTH: 1.100 MM
HEIGHT: 1.600 MM
WEIGHT APPROX.: 1.540 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: metba
model: mb-4
application type: milling
machine type: milling machine
availability: immediately
construction year: 1984
location: spain
origin country: spain

general data:
measurements width: 2000 mm
measurements depth: 1700 mm
measurements height: 1800 mm

main drive:
number of spindle: 1 

control unit:
brand: fagor

media:
main electronic connection: 380 v
 OVERVIEW: BRAND: METBA MODEL: MB-4 APPLICATION TYPE: MILLING MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 1984 LOCATION: SPAIN ORIGIN COUNTRY: SPAIN GENERAL DATA: MEASUREMENTS WIDTH: 2000 MM MEASUREMENTS DEPTH: 1700 MM MEASUREMENTS HEIGHT: 1800 MM MAIN DRIVE: NUMBER OF SPINDLE: 1 CONTROL UNIT: BRAND: FAGOR MEDIA: MAIN ELECTRONIC CONNECTION: 380 V
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 41.430 €
Ubicación: Land-: 315 mm<br/>: 630 mm<br/>: 430 mm<br/>: 830 mm<br/>: 400 mm<br/>: 2.000 mm<br/>: . 11 nr<br/>: 103 mm<br/>: 120 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 3.310 kg<br/>driven by variable speed control (2 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 315 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/> <br/>   turning length 1.000 mm ? 39.220,-   turning length 1.500 mm ? 40.050,-   turning length 3.000 mm ? 45.240,-   turning length 4.000 mm ? 49.620,-   turning length 5.000 mm ? 60.260,-   <br/><br/> <br/><br/>entre height: 315 mm<br/>swing over bed: 630 mm<br/>swing over cross slide: 430 mm<br/>swing in gap: 830 mm<br/>width of bed: 400 mm<br/>distance between centers: 2.000 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 103 mm<br/>spindle taper: m 120<br/>spindle speeds (infinitely variable in 3 subranges): 16 - 63, 63 - 250, 315 - 1.250 r/min<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 ? 12 mm/r<br/>cross feed range: 0,02 ? 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 3.310 kg<br/><br/><br/><br/> : 315 MM
: 630 MM
: 430 MM
: 830 MM
: 400 MM
: 2.000 MM
: . 11 NR
: 103 MM
: 120 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 3.310 KG
DRIVEN BY VARIABLE SPEED CONTROL (2 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 315 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:
 
TURNING LENGTH 1.000 MM ? 39.220,- TURNING LENGTH 1.500 MM ? 40.050,- TURNING LENGTH 3.000 MM ? 45.240,- TURNING LENGTH 4.000 MM ? 49.620,- TURNING LENGTH 5.000 MM ? 60.260,-



ENTRE HEIGHT: 315 MM
SWING OVER BED: 630 MM
SWING OVER CROSS SLIDE: 430 MM
SWING IN GAP: 830 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 2.000 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 103 MM
SPINDLE TAPER: M 120
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 16 - 63, 63 - 250, 315 - 1.250 R/MIN
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 ? 12 MM/R
CROSS FEED RANGE: 0,02 ? 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 3.310 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-overview:
brand: pinacho
model: s-90/310
application type: turning
machine type: lathe
availability: 15/01/2019
construction year: 2003
production hours: 17000
location: spain
origin country: spain

general data:
measurements width: 2860 mm
measurements depth: 1020 mm
measurements height: 1330 mm
machine weight: 2070 kg

main drive:
number of spindles: 1 
spindle speed range: 1500 1/min
spindle bore: 80 mm

control unit:
brand: fagor

movement:
y-axis movement: 365 mm

workpiece:
workpiece drm over bed: 620 mm
workpiece drm over support: 880 mm

tools:
max tool length: 25x25 mm
pinol diameter: 72 mm
pinol way: 180 mm

additional equipment:
1 – spindle motor 7.5 kw
 OVERVIEW: BRAND: PINACHO MODEL: S-90/310 APPLICATION TYPE: TURNING MACHINE TYPE: LATHE AVAILABILITY: 15/01/2019 CONSTRUCTION YEAR: 2003 PRODUCTION HOURS: 17000 LOCATION: SPAIN ORIGIN COUNTRY: SPAIN GENERAL DATA: MEASUREMENTS WIDTH: 2860 MM MEASUREMENTS DEPTH: 1020 MM MEASUREMENTS HEIGHT: 1330 MM MACHINE WEIGHT: 2070 KG MAIN DRIVE: NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 1500 1/MIN SPINDLE BORE: 80 MM CONTROL UNIT: BRAND: FAGOR MOVEMENT: Y-AXIS MOVEMENT: 365 MM WORKPIECE: WORKPIECE DRM OVER BED: 620 MM WORKPIECE DRM OVER SUPPORT: 880 MM TOOLS: MAX TOOL LENGTH: 25X25 MM PINOL DIAMETER: 72 MM PINOL WAY: 180 MM ADDITIONAL EQUIPMENT: 1 – SPINDLE MOTOR 7.5 KW
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: 25.200 €
Ubicación: Land-: 200 mm<br/>: 400 mm<br/>: 235 mm<br/>: 550 mm<br/>: 320 mm<br/>: 750 mm<br/>: . 6 nr<br/>: 52 mm<br/>: 6 mk<br/>: 7,5 kw<br/>: 235 mm<br/>: 110 mm<br/>: 50 mm<br/>: 4 mk<br/>: 100 mm<br/>: 1.530 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 200 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo)<br/><br/>further turning lengths:<br/><br/>    turning length 1.000 mm  ? 25.720,-    turning length 1.500 mm  ? 26.730,-   <br/><br/> <br/><br/>center height: 200 mm<br/>swing over bed: 400 mm<br/>swing over cross slide: 235 mm<br/>swing in gap: 550 mm<br/>width of bed: 320 mm<br/>distance between centers: 750 mm<br/>spindle nose / din55027: no. 6 <br/>spindle bore: 52 mm<br/>spindle taper: mt 6<br/>spindle speeds (infinitely variable in 4 subranges): 18-98, 48-265, 144-790, 385-2.120 rpm<br/>main motor power: 7,5 kw<br/>number of feeds: 80<br/>longitudinal feed range: 0,015 ? 0,6 mm/u<br/>cross feed range: 0,0075 ? 0,3 mm/u<br/>number of threads: 40<br/>metric thread range: 0,25 - 7,5 mm<br/>inch thread rangel: 120 - 4 tpi<br/>module thread range: 0,0625 - 1,875<br/>dp thread range: 480 - 16<br/>cross slide travel: 235 mm<br/>top slide travel: 110 mm<br/>tailstock quill diameter: 50 mm<br/>tailstock quill taper: mk 4<br/>tailstock travel: 100 mm<br/>weight approx.: 1.530 kg<br/><br/><br/><br/> : 200 MM
: 400 MM
: 235 MM
: 550 MM
: 320 MM
: 750 MM
: . 6 NR
: 52 MM
: 6 MK
: 7,5 KW
: 235 MM
: 110 MM
: 50 MM
: 4 MK
: 100 MM
: 1.530 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 200 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

 TURNING LENGTH 1.000 MM  ? 25.720,-  TURNING LENGTH 1.500 MM  ? 26.730,-



CENTER HEIGHT: 200 MM
SWING OVER BED: 400 MM
SWING OVER CROSS SLIDE: 235 MM
SWING IN GAP: 550 MM
WIDTH OF BED: 320 MM
DISTANCE BETWEEN CENTERS: 750 MM
SPINDLE NOSE / DIN55027: NO. 6
SPINDLE BORE: 52 MM
SPINDLE TAPER: MT 6
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 18-98, 48-265, 144-790, 385-2.120 RPM
MAIN MOTOR POWER: 7,5 KW
NUMBER OF FEEDS: 80
LONGITUDINAL FEED RANGE: 0,015 ? 0,6 MM/U
CROSS FEED RANGE: 0,0075 ? 0,3 MM/U
NUMBER OF THREADS: 40
METRIC THREAD RANGE: 0,25 - 7,5 MM
INCH THREAD RANGEL: 120 - 4 TPI
MODULE THREAD RANGE: 0,0625 - 1,875
DP THREAD RANGE: 480 - 16
CROSS SLIDE TRAVEL: 235 MM
TOP SLIDE TRAVEL: 110 MM
TAILSTOCK QUILL DIAMETER: 50 MM
TAILSTOCK QUILL TAPER: MK 4
TAILSTOCK TRAVEL: 100 MM
WEIGHT APPROX.: 1.530 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-
    long.travel.mm.1500
    cross travel.mm.2000
    vert.travel.mm.1625
    spindle travel mm.700
    spindle diam.mm.105
    spindle speed rpm.12,5/1180
    spindle taper: iso 50
    rotary table: mm.1220x1524
    table capacity: kg.5000
    spindle motor: kw.11
    weight of machine : kg.16000

dati non impegnativi da verificarsi / data must be verify
standard equipment

    cnc fagor

 LONG.TRAVEL.MM.1500 CROSS TRAVEL.MM.2000 VERT.TRAVEL.MM.1625 SPINDLE TRAVEL MM.700 SPINDLE DIAM.MM.105 SPINDLE SPEED RPM.12,5/1180 SPINDLE TAPER: ISO 50 ROTARY TABLE: MM.1220X1524 TABLE CAPACITY: KG.5000 SPINDLE MOTOR: KW.11 WEIGHT OF MACHINE : KG.16000 DATI NON IMPEGNATIVI DA VERIFICARSI / DATA MUST BE VERIFY STANDARD EQUIPMENT CNC FAGOR
Vendedor: EURO MACHINE TOOLS srl
Año de construcción: usado
Precio: 34.530 €
Ubicación: Land-: 250 mm<br/>: 500 mm<br/>: 300 mm<br/>: 700 mm<br/>: 400 mm<br/>: 1.500 mm<br/>: . 8 nr<br/>: 72 mm<br/>: 80 m<br/>: 11 kw<br/>: 315 mm<br/>: 130 mm<br/>: 90 mm<br/>: 5 mk<br/>: 230 mm<br/>: 2.950 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 250 mm<br/>spindle dead center<br/>longitudinal stop for 1 position<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/>   turning length 1.000 mm ? 33.700,-   turning length 2.000 mm ? 35.910,-   turning length 3.000 mm ? 39.720,-   turning length 4.000 mm ? 44.100,-   turning length 5.000 mm ? 54.740,-   <br/><br/><br/><br/>centre height: 250 mm<br/>swing over bed: 500 mm<br/>swing over cross slide: 300 mm<br/>swing in gap: 700 mm<br/>width of bed: 400 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 8<br/>spindlebore: 72 mm<br/>spindle taper: mt 80<br/>spindle speeds (infinitely variable in 3 subranges): 25 - 100, 100 - 400, 500 - 2.000 rpm<br/>main motor power: 11 kw<br/>number of feeds: 120<br/>longitudinal feed range: 0,04 ? 12 mm/r<br/>cross feed range: 0,02 ? 6 mm/r<br/>number of threads: 	<br/>metric thread range (64): 0,5 - 120 mm<br/>inch thread rangel (64): 60 - 1/4 tpi<br/>module thread range (64): 0,125 - 30<br/>dp thread range (64): 240 - 1<br/>cross slide travel: 315 mm<br/>top slide travel: 130 mm<br/>tailstock quill diameter: 90 mm<br/>tailstock quill taper: mk 5<br/>tailstock travel: 230 mm<br/>weight approx.: 2.950 kg<br/><br/><br/><br/> : 250 MM
: 500 MM
: 300 MM
: 700 MM
: 400 MM
: 1.500 MM
: . 8 NR
: 72 MM
: 80 M
: 11 KW
: 315 MM
: 130 MM
: 90 MM
: 5 MK
: 230 MM
: 2.950 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 250 MM
SPINDLE DEAD CENTER
LONGITUDINAL STOP FOR 1 POSITION
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:

TURNING LENGTH 1.000 MM ? 33.700,- TURNING LENGTH 2.000 MM ? 35.910,- TURNING LENGTH 3.000 MM ? 39.720,- TURNING LENGTH 4.000 MM ? 44.100,- TURNING LENGTH 5.000 MM ? 54.740,-



CENTRE HEIGHT: 250 MM
SWING OVER BED: 500 MM
SWING OVER CROSS SLIDE: 300 MM
SWING IN GAP: 700 MM
WIDTH OF BED: 400 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 8
SPINDLEBORE: 72 MM
SPINDLE TAPER: MT 80
SPINDLE SPEEDS (INFINITELY VARIABLE IN 3 SUBRANGES): 25 - 100, 100 - 400, 500 - 2.000 RPM
MAIN MOTOR POWER: 11 KW
NUMBER OF FEEDS: 120
LONGITUDINAL FEED RANGE: 0,04 ? 12 MM/R
CROSS FEED RANGE: 0,02 ? 6 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (64): 0,5 - 120 MM
INCH THREAD RANGEL (64): 60 - 1/4 TPI
MODULE THREAD RANGE (64): 0,125 - 30
DP THREAD RANGE (64): 240 - 1
CROSS SLIDE TRAVEL: 315 MM
TOP SLIDE TRAVEL: 130 MM
TAILSTOCK QUILL DIAMETER: 90 MM
TAILSTOCK QUILL TAPER: MK 5
TAILSTOCK TRAVEL: 230 MM
WEIGHT APPROX.: 2.950 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 14.500 €
Ubicación: Land-control: fagor<br/>  top width: 900 mm<br/>  transmission rate: 56 mm<br/>  tip height: 230 mm<br/>  turning diameter over bed:<br/>   over slide: 460 mm<br/>  230 mm<br/>  speed range: 33 to 3,100 rpm<br/>  feed: up to 5000 mm / min<br/>  rapid traverse: 8,000 mm / min connection: 11 kw<br/>  accessories: operating instructions<br/>  condition: good, without tailstock<br/>  weight: 2.9 t<br/>  dimensions: 2,700 x 2,000 x 2,100 mm CONTROL: FAGOR
TOP WIDTH: 900 MM
TRANSMISSION RATE: 56 MM
TIP HEIGHT: 230 MM
TURNING DIAMETER OVER BED:
OVER SLIDE: 460 MM
230 MM
SPEED RANGE: 33 TO 3,100 RPM
FEED: UP TO 5000 MM / MIN
RAPID TRAVERSE: 8,000 MM / MIN CONNECTION: 11 KW
ACCESSORIES: OPERATING INSTRUCTIONS
CONDITION: GOOD, WITHOUT TAILSTOCK
WEIGHT: 2.9 T
DIMENSIONS: 2,700 X 2,000 X 2,100 MM
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Año de construcción: usado
Precio: 58.140 €
Ubicación: Land-: 380 mm<br/>: 760 mm<br/>: 520 mm<br/>: 950 mm<br/>: 560 mm<br/>: 1.500 mm<br/>: . 11 nr<br/>: 132 mm<br/>: 140 m<br/>: 15 kw<br/>: 410 mm<br/>: 150 mm<br/>: 105 mm<br/>: 6 mk<br/>: 225 mm<br/>: 4.470 kg<br/>driven by variable speed control (3 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra type multifix with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3295/din6350, Ø 400 mm<br/>spindle dead center<br/>main motor with frequency invertor<br/>four way rapid traverse device<br/>foot pedal brake<br/>longitudinal stop for 1 position<br/>steady and following rest<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>quick release tailstock<br/>tailstock quill reducer<br/>mechanized movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/><br/>(sample photo) <br/><br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 47.810,-   turning length 2.000 mm ? 49.990,-   turning length 4.000 mm ? 64.430,-   turning length 5.000 mm ? 73.460,-   turning length 6.000 mm ? 83.340,-   <br/><br/>centre height: 380 mm<br/>swing over bed: 760 mm<br/>swing over cross slide: 520 mm<br/>swing in gap: 950 mm<br/>width of bed: 560 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 11<br/>spindlebore: 132 mm<br/>spindle taper: m 140<br/>drehzahlen (variabel mit 3 stufen): 7 - 42, 28 - 170, 165 - 1.015 rpm<br/>main motor power: 15 kw<br/>number of feeds: 150<br/>longitudinal feed range: 0,039 ? 18 mm/r<br/>cross feed range: 0,02 ? 9 mm/r<br/>number of threads: 	<br/>metric thread range (76): 0,5 - 180 mm<br/>inch thread rangel (76): 60 - 1/6 tpi<br/>module thread range (76): 0,125 - 45<br/>dp thread range (76): 240 - 2/3<br/>cross slide travel: 410 mm<br/>top slide travel: 150 mm<br/>tailstock quill diameter: 105 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 225 mm<br/>weight approx.: 4.470 kg<br/><br/><br/><br/> : 380 MM
: 760 MM
: 520 MM
: 950 MM
: 560 MM
: 1.500 MM
: . 11 NR
: 132 MM
: 140 M
: 15 KW
: 410 MM
: 150 MM
: 105 MM
: 6 MK
: 225 MM
: 4.470 KG
DRIVEN BY VARIABLE SPEED CONTROL (3 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA TYPE MULTIFIX WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3295/DIN6350, Ø 400 MM
SPINDLE DEAD CENTER
MAIN MOTOR WITH FREQUENCY INVERTOR
FOUR WAY RAPID TRAVERSE DEVICE
FOOT PEDAL BRAKE
LONGITUDINAL STOP FOR 1 POSITION
STEADY AND FOLLOWING REST
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
QUICK RELEASE TAILSTOCK
TAILSTOCK QUILL REDUCER
MECHANIZED MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",

(SAMPLE PHOTO)

FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 47.810,- TURNING LENGTH 2.000 MM ? 49.990,- TURNING LENGTH 4.000 MM ? 64.430,- TURNING LENGTH 5.000 MM ? 73.460,- TURNING LENGTH 6.000 MM ? 83.340,-

CENTRE HEIGHT: 380 MM
SWING OVER BED: 760 MM
SWING OVER CROSS SLIDE: 520 MM
SWING IN GAP: 950 MM
WIDTH OF BED: 560 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 11
SPINDLEBORE: 132 MM
SPINDLE TAPER: M 140
DREHZAHLEN (VARIABEL MIT 3 STUFEN): 7 - 42, 28 - 170, 165 - 1.015 RPM
MAIN MOTOR POWER: 15 KW
NUMBER OF FEEDS: 150
LONGITUDINAL FEED RANGE: 0,039 ? 18 MM/R
CROSS FEED RANGE: 0,02 ? 9 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (76): 0,5 - 180 MM
INCH THREAD RANGEL (76): 60 - 1/6 TPI
MODULE THREAD RANGE (76): 0,125 - 45
DP THREAD RANGE (76): 240 - 2/3
CROSS SLIDE TRAVEL: 410 MM
TOP SLIDE TRAVEL: 150 MM
TAILSTOCK QUILL DIAMETER: 105 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 225 MM
WEIGHT APPROX.: 4.470 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 6.250 €
Ubicación: Land-cnc lathe pinacho s94 c/310 cnc lathe was manufactured in spain.

characteristic parameters:
- control: fagor 800 - tgi
- turning length: 1600 mm
- turning diameter: 580 mm
- toolchanger positions: 8
- dimensions (length x width x height): approx. 346 x 1400 x 2080 mm
- weight: approx. 3000 kg   CNC LATHE PINACHO S94 C/310 CNC LATHE WAS MANUFACTURED IN SPAIN. CHARACTERISTIC PARAMETERS: - CONTROL: FAGOR 800 - TGI - TURNING LENGTH: 1600 MM - TURNING DIAMETER: 580 MM - TOOLCHANGER POSITIONS: 8 - DIMENSIONS (LENGTH X WIDTH X HEIGHT): APPROX. 346 X 1400 X 2080 MM - WEIGHT: APPROX. 3000 KG
Vendedor: MASZYNERIA SP. Z O.O.
Año de construcción: usado
Precio: 121.450 €
Ubicación: Land-: 625 mm<br/>: 1.320 mm<br/>: 940 mm<br/>: 1.500 mm<br/>: 700 mm<br/>: 1.500 mm<br/>: . 15 nr<br/>: 155 mm<br/>: 160 m<br/>: 30 kw<br/>: 685 mm<br/>: 270 mm<br/>: 125 mm<br/>: 6 mk<br/>: 260 mm<br/>: 8.550 kg<br/>driven by variable speed control (4 steps)<br/>3-axes digital readout fagor with css (constant surface speed)<br/>quick change toolpost amestra with 4 holders (3 square, 1 round)<br/>3-jaw chuck bison 3204/din6350, Ø 500 mm<br/>spindle dead center<br/>coolant equipment<br/>full length rear splash guard<br/>leadscrew and shaft protection<br/>safety guard for the chuck<br/>toolholder guard<br/>levelling bolts and plates<br/>tailstock quill reducer<br/>electric motor movement of tailstock<br/>low voltage machine lamp<br/>operating manual<br/>machine according to ",ce",<br/>(sample photo)<br/>further turning lengths:<br/><br/><br/>   turning length 1.500 mm ? 81.910,-   turning length 3.000 mm ? 87.960,-   turning length 4.000 mm  ? 98.660,-    turning length 5.000 mm ? 103.930,-   <br/><br/><br/><br/>entre height: 625 mm<br/>swing over bed: 1.320 mm<br/>swing over cross slide: 940 mm<br/>swing in gap: 1.500 mm<br/>width of bed: 700 mm<br/>distance between centers: 1.500 mm<br/>spindle nose / din55027: no. 15<br/>spindlebore: 155 mm<br/>spindle taper: m 160<br/>spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 rpm<br/>main motor power: 30 kw<br/>number of feeds: 160<br/>longitudinal feed range: 0,032 ? 38,9 mm/r<br/>cross feed range: 0,016 ? 19,45 mm/r<br/>number of threads: 	<br/>metric thread range (80): 0,5 - 480 mm<br/>inch thread rangel (80): 60 - 1/16 tpi<br/>module thread range (80): 0,125 - 120<br/>dp thread range (80): 240 - 1/4<br/>cross slide travel: 525 mm<br/>top slide travel: 270 mm<br/>tailstock quill diameter: 125 mm<br/>tailstock quill taper: mk 6<br/>tailstock travel: 260 mm<br/>weight approx.: 8.550 kg<br/><br/><br/><br/> : 625 MM
: 1.320 MM
: 940 MM
: 1.500 MM
: 700 MM
: 1.500 MM
: . 15 NR
: 155 MM
: 160 M
: 30 KW
: 685 MM
: 270 MM
: 125 MM
: 6 MK
: 260 MM
: 8.550 KG
DRIVEN BY VARIABLE SPEED CONTROL (4 STEPS)
3-AXES DIGITAL READOUT FAGOR WITH CSS (CONSTANT SURFACE SPEED)
QUICK CHANGE TOOLPOST AMESTRA WITH 4 HOLDERS (3 SQUARE, 1 ROUND)
3-JAW CHUCK BISON 3204/DIN6350, Ø 500 MM
SPINDLE DEAD CENTER
COOLANT EQUIPMENT
FULL LENGTH REAR SPLASH GUARD
LEADSCREW AND SHAFT PROTECTION
SAFETY GUARD FOR THE CHUCK
TOOLHOLDER GUARD
LEVELLING BOLTS AND PLATES
TAILSTOCK QUILL REDUCER
ELECTRIC MOTOR MOVEMENT OF TAILSTOCK
LOW VOLTAGE MACHINE LAMP
OPERATING MANUAL
MACHINE ACCORDING TO ",CE",
(SAMPLE PHOTO)
FURTHER TURNING LENGTHS:


TURNING LENGTH 1.500 MM ? 81.910,- TURNING LENGTH 3.000 MM ? 87.960,- TURNING LENGTH 4.000 MM ? 98.660,- TURNING LENGTH 5.000 MM ? 103.930,-



ENTRE HEIGHT: 625 MM
SWING OVER BED: 1.320 MM
SWING OVER CROSS SLIDE: 940 MM
SWING IN GAP: 1.500 MM
WIDTH OF BED: 700 MM
DISTANCE BETWEEN CENTERS: 1.500 MM
SPINDLE NOSE / DIN55027: NO. 15
SPINDLEBORE: 155 MM
SPINDLE TAPER: M 160
SPINDLE SPEEDS (INFINITELY VARIABLE IN 4 SUBRANGES): 3,7 - 15,6, 14,7 - 62, 58 - 250, 235 - 1.000 RPM
MAIN MOTOR POWER: 30 KW
NUMBER OF FEEDS: 160
LONGITUDINAL FEED RANGE: 0,032 ? 38,9 MM/R
CROSS FEED RANGE: 0,016 ? 19,45 MM/R
NUMBER OF THREADS:
METRIC THREAD RANGE (80): 0,5 - 480 MM
INCH THREAD RANGEL (80): 60 - 1/16 TPI
MODULE THREAD RANGE (80): 0,125 - 120
DP THREAD RANGE (80): 240 - 1/4
CROSS SLIDE TRAVEL: 525 MM
TOP SLIDE TRAVEL: 270 MM
TAILSTOCK QUILL DIAMETER: 125 MM
TAILSTOCK QUILL TAPER: MK 6
TAILSTOCK TRAVEL: 260 MM
WEIGHT APPROX.: 8.550 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-a cnc machining center of manufacturer microcut will type rh30 here offers. 
the machine is in good condition and can be visited like to by appointment only in our warehouse under power and tested. 
free loading truck
technical data:
make: microcut
type: rh 30
control: fagor 8055 mc
year of construction: 2000

traverse path x/y/z: 1524/762 / 711 mm
clamping surface: 1854 x 610 mm
toolholder: bt 40
number of tool stations - tool changer: 16

working hours: ca. 35 thousand.
spindle hours: approximately 12 thousand.
workpiece weight: 1500 kg
dimensions: 4700 x 2600 x 2800 mm
weight: 5500 kg

leasing/financing available. please enquire.

orginalfoto
price excl. vat
free loading truck
please note that the photos are part of the auction
sales invoice
for more details see pictures or manufacturer page
visit and pick up at any time
all details are information about
it used no guarantee or warranty.
delivery possible. please enquire
errors and omissions as well as subject to prior sale. A CNC MACHINING CENTER OF MANUFACTURER MICROCUT WILL TYPE RH30 HERE OFFERS. THE MACHINE IS IN GOOD CONDITION AND CAN BE VISITED LIKE TO BY APPOINTMENT ONLY IN OUR WAREHOUSE UNDER POWER AND TESTED. FREE LOADING TRUCK TECHNICAL DATA: MAKE: MICROCUT TYPE: RH 30 CONTROL: FAGOR 8055 MC YEAR OF CONSTRUCTION: 2000 TRAVERSE PATH X/Y/Z: 1524/762 / 711 MM CLAMPING SURFACE: 1854 X 610 MM TOOLHOLDER: BT 40 NUMBER OF TOOL STATIONS - TOOL CHANGER: 16 WORKING HOURS: CA. 35 THOUSAND. SPINDLE HOURS: APPROXIMATELY 12 THOUSAND. WORKPIECE WEIGHT: 1500 KG DIMENSIONS: 4700 X 2600 X 2800 MM WEIGHT: 5500 KG LEASING/FINANCING AVAILABLE. PLEASE ENQUIRE. ORGINALFOTO PRICE EXCL. VAT FREE LOADING TRUCK PLEASE NOTE THAT THE PHOTOS ARE PART OF THE AUCTION SALES INVOICE FOR MORE DETAILS SEE PICTURES OR MANUFACTURER PAGE VISIT AND PICK UP AT ANY TIME ALL DETAILS ARE INFORMATION ABOUT IT USED NO GUARANTEE OR WARRANTY. DELIVERY POSSIBLE. PLEASE ENQUIRE ERRORS AND OMISSIONS AS WELL AS SUBJECT TO PRIOR SALE.
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung
Año de construcción: usado
Precio: used machinery auction RESALE 500 €
Ubicación: Land-fagor s/s cooking vessel, inside dimensions: 630 mm x 630 mm x 510 mm, total dimensions: 1040 mm x 850 mm x 1550 mm. missing buttons, technical condition unknown. FAGOR S/S COOKING VESSEL, INSIDE DIMENSIONS: 630 MM X 630 MM X 510 MM, TOTAL DIMENSIONS: 1040 MM X 850 MM X 1550 MM. MISSING BUTTONS, TECHNICAL CONDITION UNKNOWN.
Vendedor: Industrial Auctions BV
Año de construcción: usado
Precio: 28.000 €
Ubicación: Land-cnc lathe of geminis % 4 bearing no 1105-02415 category cnc lathe make of geminis type % 4 built in 2004 state second-hand machine control cnc fagor tc 8055 storage france country of origin delivery immediately cargo base from site 
 
technical details of turning diameter 720 mm turning length 2000 mm control tc of fagor 8055 spindle diameter 104 mm turning diameter over slide 470 speed 0-1600 m / min voltage 400 v total power requirement kw machine weight approx. 8 t dimensions approx.  m description with lunettes
 cnc fagor 8055 tc 
 CNC LATHE OF GEMINIS % 4 BEARING NO 1105-02415 CATEGORY CNC LATHE MAKE OF GEMINIS TYPE % 4 BUILT IN 2004 STATE SECOND-HAND MACHINE CONTROL CNC FAGOR TC 8055 STORAGE FRANCE COUNTRY OF ORIGIN DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECHNICAL DETAILS OF TURNING DIAMETER 720 MM TURNING LENGTH 2000 MM CONTROL TC OF FAGOR 8055 SPINDLE DIAMETER 104 MM TURNING DIAMETER OVER SLIDE 470 SPEED 0-1600 M / MIN VOLTAGE 400 V TOTAL POWER REQUIREMENT KW MACHINE WEIGHT APPROX. 8 T DIMENSIONS APPROX. M DESCRIPTION WITH LUNETTES CNC FAGOR 8055 TC
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter over bed:450 mm<br/>turning diameter over slide rest:260 mm<br/>turning length:2000 mm<br/>centre height:217 mm<br/>swing diameter in throat:650 mm<br/>turning length in the crank:100 mm<br/>spindle bore:52 mm<br/>spindle taper din:55022/6 <br/>sleeve conus:5 mk<br/>:75 mm<br/>quill stroke:180 mm<br/>total power requirement:5,5 kw<br/>weight of the machine ca.:1,9 t<br/>dimensions of the machine ca.:ca. 3200x1020x1250 mm<br/>3 jaw chuck Ø:200 mm<br/>tool post holder multifix:größe b <br/>fixed steady:spannbereich bis 130 mm <br/>electrical chuck guard: <br/>splash gurads: <br/>complete cooling unit: <br/>technical documentation in german language: <br/>2 axis dro fagor: <br/><br/> TURNING DIAMETER OVER BED:450 MM
TURNING DIAMETER OVER SLIDE REST:260 MM
TURNING LENGTH:2000 MM
CENTRE HEIGHT:217 MM
SWING DIAMETER IN THROAT:650 MM
TURNING LENGTH IN THE CRANK:100 MM
SPINDLE BORE:52 MM
SPINDLE TAPER DIN:55022/6
SLEEVE CONUS:5 MK
:75 MM
QUILL STROKE:180 MM
TOTAL POWER REQUIREMENT:5,5 KW
WEIGHT OF THE MACHINE CA.:1,9 T
DIMENSIONS OF THE MACHINE CA.:CA. 3200X1020X1250 MM
3 JAW CHUCK Ø:200 MM
TOOL POST HOLDER MULTIFIX:GRößE B
FIXED STEADY:SPANNBEREICH BIS 130 MM
ELECTRICAL CHUCK GUARD:
SPLASH GURADS:
COMPLETE COOLING UNIT:
TECHNICAL DOCUMENTATION IN GERMAN LANGUAGE:
2 AXIS DRO FAGOR:

Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-3 axis digital display fagor<br/>  solid table<br/>  speed: 40-2000 rpm<br/>  feed rate and rapid motion in 3 axes<br/>  feed rate of 10 to 500 mm / min<br/>  rapid traverse 1500 mm/min in all feed directions<br/>  power.: 2,2 kw<br/>  traverse path x/y/z: 800/300/400 mm (y stroke is still 200 movable equipment: vertical & horizontal spindle)<br/>  vertical spindle and horizontal quill extendable - sk 40<br/>  suit system s20x2<br/>  weight approx. 1900 kg 3 AXIS DIGITAL DISPLAY FAGOR
SOLID TABLE
SPEED: 40-2000 RPM
FEED RATE AND RAPID MOTION IN 3 AXES
FEED RATE OF 10 TO 500 MM / MIN
RAPID TRAVERSE 1500 MM/MIN IN ALL FEED DIRECTIONS
POWER.: 2,2 KW
TRAVERSE PATH X/Y/Z: 800/300/400 MM (Y STROKE IS STILL 200 MOVABLE EQUIPMENT: VERTICAL & HORIZONTAL SPINDLE)
VERTICAL SPINDLE AND HORIZONTAL QUILL EXTENDABLE - SK 40
SUIT SYSTEM S20X2
WEIGHT APPROX. 1900 KG
Vendedor: Dahms Maschinenhandel
Año de construcción: usado
Ubicación: Land-:fbn-1500 | fbn-2000 | fbn-2500 | fbn-3000 <br/>faceplate diameter:1500|2000|2500|3000 mm<br/>turning diameter:1500|2000|2500|3000 mm<br/>turning length:700 mm<br/>spindle bore:155 mm<br/>spindle nose:a2-11 <br/>spindle speeds:4-600|40-400|40-400|40-400 1/min<br/>spindle drive:22|30|30|30 kw<br/>travel -x axis:800|1200|1800|2300 mm<br/>travel - z:700 mm<br/>servo motor x-axis:?22/3000i 3.0kw <br/>servo motor z-axis:?22/3000i 3.0kw kw<br/>rapid power traverse in x-and z direction:6/8 m/min<br/>weight of the machine ca.:5|6|8|10 t<br/>dimensions of the machine ca.:3300x2200x2500 mm<br/>cnc controller siemens 828: <br/>: <br/>automatic lubrication system: <br/>machine semi-cover: <br/>frequency control main spindel engine: <br/>coolant system: <br/>halogen lamp: <br/>mpg hand wheel: <br/>levelling elements: <br/>: <br/>ce-design: <br/>ce-certificate: <br/>: <br/>metric, 400v 50hz 3 phase: <br/>c-axis: <br/>different chucks and faceplates: <br/>different spindle motor power: <br/>turret: <br/>linear scales: <br/>chip conveyor and trolley: <br/>: <br/>cnc controls from: <br/><br/>factory new, high-stability cnc head turning machine, make kraft, type fbn series  - conventional or with cnc control siemens / fanuc / fagor - optional with c-axis and additional extensive accessories - bed lengthwise or crosswise - also available with tailstock   send us your requirements for the machine and we adapt the machine to your needs!  fig. shows fbn-80 (turning diameter 2000mm)  benefit from the favorable leasing and hire-purchase conditions of abc leasing: ask us about it! of course, we also gladly organize for you the delivery free-of-charge including assembly / commissioning and ready for handover as well as instruction :FBN-1500 | FBN-2000 | FBN-2500 | FBN-3000
FACEPLATE DIAMETER:1500|2000|2500|3000 MM
TURNING DIAMETER:1500|2000|2500|3000 MM
TURNING LENGTH:700 MM
SPINDLE BORE:155 MM
SPINDLE NOSE:A2-11
SPINDLE SPEEDS:4-600|40-400|40-400|40-400 1/MIN
SPINDLE DRIVE:22|30|30|30 KW
TRAVEL -X AXIS:800|1200|1800|2300 MM
TRAVEL - Z:700 MM
SERVO MOTOR X-AXIS:?22/3000I 3.0KW
SERVO MOTOR Z-AXIS:?22/3000I 3.0KW KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:6/8 M/MIN
WEIGHT OF THE MACHINE CA.:5|6|8|10 T
DIMENSIONS OF THE MACHINE CA.:3300X2200X2500 MM
CNC CONTROLLER SIEMENS 828:
:
AUTOMATIC LUBRICATION SYSTEM:
MACHINE SEMI-COVER:
FREQUENCY CONTROL MAIN SPINDEL ENGINE:
COOLANT SYSTEM:
HALOGEN LAMP:
MPG HAND WHEEL:
LEVELLING ELEMENTS:
:
CE-DESIGN:
CE-CERTIFICATE:
:
METRIC, 400V 50HZ 3 PHASE:
C-AXIS:
DIFFERENT CHUCKS AND FACEPLATES:
DIFFERENT SPINDLE MOTOR POWER:
TURRET:
LINEAR SCALES:
CHIP CONVEYOR AND TROLLEY:
:
CNC CONTROLS FROM:

FACTORY NEW, HIGH-STABILITY CNC HEAD TURNING MACHINE, MAKE KRAFT, TYPE FBN SERIES - CONVENTIONAL OR WITH CNC CONTROL SIEMENS / FANUC / FAGOR - OPTIONAL WITH C-AXIS AND ADDITIONAL EXTENSIVE ACCESSORIES - BED LENGTHWISE OR CROSSWISE - ALSO AVAILABLE WITH TAILSTOCK SEND US YOUR REQUIREMENTS FOR THE MACHINE AND WE ADAPT THE MACHINE TO YOUR NEEDS! FIG. SHOWS FBN-80 (TURNING DIAMETER 2000MM) BENEFIT FROM THE FAVORABLE LEASING AND HIRE-PURCHASE CONDITIONS OF ABC LEASING: ASK US ABOUT IT! OF COURSE, WE ALSO GLADLY ORGANIZE FOR YOU THE DELIVERY FREE-OF-CHARGE INCLUDING ASSEMBLY / COMMISSIONING AND READY FOR HANDOVER AS WELL AS INSTRUCTION
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-cycles lathe, manufacturer omap, model fms 250, control fagor, built 1997, very good condition, 3 - jaw chuck, quick change toolpost, coolant system, top width 1000 - 1500 - 2000 mm, tip height over bed 250 mm, width bed guides 330 mm, max. turning diameter over bed 500 mm, maximum turning diameter over slide 300 mm, cross slide thrust x 250 mm, diameter spindle bore 77-105 mm, tailstock quill diameter 60 mm, reiststock quill stroke 180 mm, weight 2,750 kg, dimensions lxwxh approx. 3,200 x 1,500 x 2,200 mm CYCLES LATHE, MANUFACTURER OMAP, MODEL FMS 250, CONTROL FAGOR, BUILT 1997, VERY GOOD CONDITION, 3 - JAW CHUCK, QUICK CHANGE TOOLPOST, COOLANT SYSTEM, TOP WIDTH 1000 - 1500 - 2000 MM, TIP HEIGHT OVER BED 250 MM, WIDTH BED GUIDES 330 MM, MAX. TURNING DIAMETER OVER BED 500 MM, MAXIMUM TURNING DIAMETER OVER SLIDE 300 MM, CROSS SLIDE THRUST X 250 MM, DIAMETER SPINDLE BORE 77-105 MM, TAILSTOCK QUILL DIAMETER 60 MM, REISTSTOCK QUILL STROKE 180 MM, WEIGHT 2,750 KG, DIMENSIONS LXWXH APPROX. 3,200 X 1,500 X 2,200 MM
Vendedor: CVG Industry Trade & Support GmbH
Año de construcción: usado
Ubicación: Land-faceplate diameter:4700/5700 mm<br/>swing diameter:6300 mm<br/>turning height:3150/4000 mm<br/>workpiece weight:63/100 t<br/>table speeds:0.2-32 u/min (2 stufen) <br/>max. torque:400 knm<br/>slide stroke:vertikal: 1600/2000 mm<br/>slide stroke:horizontal: 3400 mm<br/>cross section of ram:240x240/280x280 mm<br/>cross rail travel :2000 mm<br/>rapid feed cross beam:300 mm/min<br/>feed stepless:x-achse: 1-500 mm/min<br/>main drive:90/110 kw<br/>weight of the machine ca.:110/170 t<br/>machine size (lxwxh):9000x7000x8000 mm<br/>control:siemens/fanuc/fagor <br/>: <br/>: <br/>: <br/>workbench: <br/>: <br/>worktool support (a-axis):2 stück<br/>operating manual: <br/>control cabinet siemens plc: <br/>: <br/>: <br/>:1 stück<br/>rams:1 stück konventioneller und 1 stück cnc-stößel <br/>ce-design: <br/>: <br/>european electric: <br/>linear scales: <br/>workpiece measurement system: <br/>c-axis: <br/>cnc controls from:siemens/fanuc/fagor <br/>turret: <br/>tool measuring system: <br/>semi guarding: <br/><br/>for more information please check attached pdf file on the right hand side FACEPLATE DIAMETER:4700/5700 MM
SWING DIAMETER:6300 MM
TURNING HEIGHT:3150/4000 MM
WORKPIECE WEIGHT:63/100 T
TABLE SPEEDS:0.2-32 U/MIN (2 STUFEN)
MAX. TORQUE:400 KNM
SLIDE STROKE:VERTIKAL: 1600/2000 MM
SLIDE STROKE:HORIZONTAL: 3400 MM
CROSS SECTION OF RAM:240X240/280X280 MM
CROSS RAIL TRAVEL :2000 MM
RAPID FEED CROSS BEAM:300 MM/MIN
FEED STEPLESS:X-ACHSE: 1-500 MM/MIN
MAIN DRIVE:90/110 KW
WEIGHT OF THE MACHINE CA.:110/170 T
MACHINE SIZE (LXWXH):9000X7000X8000 MM
CONTROL:SIEMENS/FANUC/FAGOR
:
:
:
WORKBENCH:
:
WORKTOOL SUPPORT (A-AXIS):2 STüCK
OPERATING MANUAL:
CONTROL CABINET SIEMENS PLC:
:
:
:1 STüCK
RAMS:1 STüCK KONVENTIONELLER UND 1 STüCK CNC-STößEL
CE-DESIGN:
:
EUROPEAN ELECTRIC:
LINEAR SCALES:
WORKPIECE MEASUREMENT SYSTEM:
C-AXIS:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
TURRET:
TOOL MEASURING SYSTEM:
SEMI GUARDING:

FOR MORE INFORMATION PLEASE CHECK ATTACHED PDF FILE ON THE RIGHT HAND SIDE
Vendedor: GK Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-used, very good condition from production:<br/>  <br/>  1 x fagor tle4-1000-4300-2400 link-drive coil and strip levelling line punching machine<br/>  <br/>  scope of delivery:<br/>  fagor tle4-1000-4300-2400 stamping<br/>  coilanlage<br/>  setting system<br/>  <br/>  facilities:<br/>  flywheel and clutch were replaced 2 years ago.<br/>  gillet transfer line with 3 curves transfer (free programmable)<br/>  link-drive kinematics (including faster this hub)<br/>  <br/>  investment is still under power and can be visited by prior arrangement. <br/>  <br/>  technical data:<br/>  year of construction: 2000 nominal force at 12.7 mm before ut.: 10.000 kn<br/>  tabletop lxw: 4300 x 2400 mm<br/>  tappet surface lxw: 4300 x 2400 mm<br/>  fixed hub: 720 mm<br/>  number of strokes per minute: 10 + 30 distance table-ok to ram-uk: 1200 mm<br/>  tappet adjustment: 400 mm<br/>  table height: 600 mm<br/>  stand width: 4650 mm<br/>  side opening: 2600 mm price is plus vat loading from site.<br/>  <br/>  changes / errors in the specifications and subject to prior sale USED, VERY GOOD CONDITION FROM PRODUCTION:

1 X FAGOR TLE4-1000-4300-2400 LINK-DRIVE COIL AND STRIP LEVELLING LINE PUNCHING MACHINE

SCOPE OF DELIVERY:
FAGOR TLE4-1000-4300-2400 STAMPING
COILANLAGE
SETTING SYSTEM

FACILITIES:
FLYWHEEL AND CLUTCH WERE REPLACED 2 YEARS AGO.
GILLET TRANSFER LINE WITH 3 CURVES TRANSFER (FREE PROGRAMMABLE)
LINK-DRIVE KINEMATICS (INCLUDING FASTER THIS HUB)

INVESTMENT IS STILL UNDER POWER AND CAN BE VISITED BY PRIOR ARRANGEMENT.

TECHNICAL DATA:
YEAR OF CONSTRUCTION: 2000 NOMINAL FORCE AT 12.7 MM BEFORE UT.: 10.000 KN
TABLETOP LXW: 4300 X 2400 MM
TAPPET SURFACE LXW: 4300 X 2400 MM
FIXED HUB: 720 MM
NUMBER OF STROKES PER MINUTE: 10 + 30 DISTANCE TABLE-OK TO RAM-UK: 1200 MM
TAPPET ADJUSTMENT: 400 MM
TABLE HEIGHT: 600 MM
STAND WIDTH: 4650 MM
SIDE OPENING: 2600 MM PRICE IS PLUS VAT LOADING FROM SITE.

CHANGES / ERRORS IN THE SPECIFICATIONS AND SUBJECT TO PRIOR SALE
Vendedor: Weigel – Consulting
Año de construcción: usado
Ubicación: Land-spindle diameter:110 mm<br/>x-travel:1600 mm<br/>y-travel:1000 mm<br/>z-travel:1250 mm<br/>w-axis:ausfahren der spindel: 400 mm<br/>b-axis (table):360 x 1° mm<br/>distance table/spindle center:0-1000 mm<br/>table load:2,5 t<br/>table-size:1000x800 mm<br/>t-slot (width-distance-quantity):22h8 x 7 x 100 mm<br/>tool taper:50 iso<br/>spindle turning speed - stepless:2 stufen: 20-1000 1/min<br/>feeds:x/y/z-achse: 3-950 mm/min<br/>feeds:w-achse: 3-400 mm/min<br/>rapid speed:x/y/z-achse: 2,8 m/min<br/>rapid speed:w-achse: 2 m/min<br/>main drive:15 kw (drehzahlgeregelt) <br/>feed motors:x/y/z-achse-servomotoren: 2,9 kw<br/>feed motor:w-achse-servomotor: 1,3 kw<br/>range l-w-h:3.874 x 4.317x3.715 mm<br/>weight of the machine ca.:12 t<br/>total power requirement:20 kva<br/>automatic lubrication system: <br/>coolant system: <br/>ce-design: <br/>: <br/>foundation: <br/>automatic tool clamping:pneumatisch <br/>hydr. clamping of the axes: <br/>pneumtic clamping of the table (b-axis): <br/>ball screw in axes:x/z/w <br/>: <br/>cnc controls from:siemens/fanuc/fagor <br/>angular milling head: <br/>universal milling head: <br/>clamping angle: <br/>spindle holder: <br/>tool measuring system: <br/>workpiece measurement system: <br/>facing head: <br/><br/> SPINDLE DIAMETER:110 MM
X-TRAVEL:1600 MM
Y-TRAVEL:1000 MM
Z-TRAVEL:1250 MM
W-AXIS:AUSFAHREN DER SPINDEL: 400 MM
B-AXIS (TABLE):360 X 1° MM
DISTANCE TABLE/SPINDLE CENTER:0-1000 MM
TABLE LOAD:2,5 T
TABLE-SIZE:1000X800 MM
T-SLOT (WIDTH-DISTANCE-QUANTITY):22H8 X 7 X 100 MM
TOOL TAPER:50 ISO
SPINDLE TURNING SPEED - STEPLESS:2 STUFEN: 20-1000 1/MIN
FEEDS:X/Y/Z-ACHSE: 3-950 MM/MIN
FEEDS:W-ACHSE: 3-400 MM/MIN
RAPID SPEED:X/Y/Z-ACHSE: 2,8 M/MIN
RAPID SPEED:W-ACHSE: 2 M/MIN
MAIN DRIVE:15 KW (DREHZAHLGEREGELT)
FEED MOTORS:X/Y/Z-ACHSE-SERVOMOTOREN: 2,9 KW
FEED MOTOR:W-ACHSE-SERVOMOTOR: 1,3 KW
RANGE L-W-H:3.874 X 4.317X3.715 MM
WEIGHT OF THE MACHINE CA.:12 T
TOTAL POWER REQUIREMENT:20 KVA
AUTOMATIC LUBRICATION SYSTEM:
COOLANT SYSTEM:
CE-DESIGN:
:
FOUNDATION:
AUTOMATIC TOOL CLAMPING:PNEUMATISCH
HYDR. CLAMPING OF THE AXES:
PNEUMTIC CLAMPING OF THE TABLE (B-AXIS):
BALL SCREW IN AXES:X/Z/W
:
CNC CONTROLS FROM:SIEMENS/FANUC/FAGOR
ANGULAR MILLING HEAD:
UNIVERSAL MILLING HEAD:
CLAMPING ANGLE:
SPINDLE HOLDER:
TOOL MEASURING SYSTEM:
WORKPIECE MEASUREMENT SYSTEM:
FACING HEAD:

Vendedor: GK Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FAGOR types: