1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-
machine type machining center - vertical make victor type vc 55 year 2000 control type cnc storage france country of origin taiwan delivery immediately cargo base stock haguenau france technical details

x trail 550 mm y route 460 mm z-way 460 mm table size 800 x 460 mm spindle retainer iso bt 40 spindle unloading 476 mm distance spindle nose and table 150-660 mm workpiece weight of 600 kg max speed range 20-8000 rpm feeds - longitudinal/transverse/vertical 24000 mm / min  
rapid traverse - longitudinal/transverse/vertical 30 m / min number of tool magazine 24 additional information

accessories: coolant system
 cnc control fanuc om-pallet exchange table
 and spaenefoerderer MACHINE TYPE MACHINING CENTER - VERTICAL MAKE VICTOR TYPE VC 55 YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS X TRAIL 550 MM Y ROUTE 460 MM Z-WAY 460 MM TABLE SIZE 800 X 460 MM SPINDLE RETAINER ISO BT 40 SPINDLE UNLOADING 476 MM DISTANCE SPINDLE NOSE AND TABLE 150-660 MM WORKPIECE WEIGHT OF 600 KG MAX SPEED RANGE 20-8000 RPM FEEDS - LONGITUDINAL/TRANSVERSE/VERTICAL 24000 MM / MIN RAPID TRAVERSE - LONGITUDINAL/TRANSVERSE/VERTICAL 30 M / MIN NUMBER OF TOOL MAGAZINE 24 ADDITIONAL INFORMATION ACCESSORIES: COOLANT SYSTEM CNC CONTROL FANUC OM-PALLET EXCHANGE TABLE AND SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 109.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type super ntj built in 2003 control type cnc storage france country of origin japan delivery time upon request of freight base from site technical details

turning diameter 190 mm turning length 700 mm control fanuc 18 itb speed 5,000 r/min rapid traverse rate: 16,40.6 (x, y, z) 15/11 kw main/counter spindle kw number tools 2 x 12 / 2 x 24 pcs 
tool holder directly number of axles 9-controlled st. 
driven tools 12 per turret conveyors mayfran eject of right kw clamping cylinder bar passage 82 duty hours 3000 h machine weight 13 tons of additional information

engine type: horizontal
 counter spindle
 clamping spindle: hainbuch modular gr 65 + 3 jaw chuck
 spannmitel counter spindle: hainbuch spanntop combi pull gr 65 + 3 jaw chuck
 y-axis +-45 mm
 b-axis +-91 â° on upper turret
 nt-nurse + nc kit
 feed blow out from the outside on main spindle coolant and air through the counter spindle
 precast grippers g/l 165 mm d 65 mm, 3 kg
 part on a tray
 handwheel

and 12-driven tool holders
 12 fixed holder
 spaenefoerderer MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SUPER NTJ BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 190 MM TURNING LENGTH 700 MM CONTROL FANUC 18 ITB SPEED 5,000 R/MIN RAPID TRAVERSE RATE: 16,40.6 (X, Y, Z) 15/11 KW MAIN/COUNTER SPINDLE KW NUMBER TOOLS 2 X 12 / 2 X 24 PCS TOOL HOLDER DIRECTLY NUMBER OF AXLES 9-CONTROLLED ST. DRIVEN TOOLS 12 PER TURRET CONVEYORS MAYFRAN EJECT OF RIGHT KW CLAMPING CYLINDER BAR PASSAGE 82 DUTY HOURS 3000 H MACHINE WEIGHT 13 TONS OF ADDITIONAL INFORMATION ENGINE TYPE: HORIZONTAL COUNTER SPINDLE CLAMPING SPINDLE: HAINBUCH MODULAR GR 65 + 3 JAW CHUCK SPANNMITEL COUNTER SPINDLE: HAINBUCH SPANNTOP COMBI PULL GR 65 + 3 JAW CHUCK Y-AXIS +-45 MM B-AXIS +-91 ° ON UPPER TURRET NT-NURSE + NC KIT FEED BLOW OUT FROM THE OUTSIDE ON MAIN SPINDLE COOLANT AND AIR THROUGH THE COUNTER SPINDLE PRECAST GRIPPERS G/L 165 MM D 65 MM, 3 KG PART ON A TRAY HANDWHEEL AND 12-DRIVEN TOOL HOLDERS 12 FIXED HOLDER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-[embed]https://www.youtube.com/watch?v=qvr1dwyog44[/embed] [EMBED]HTTPS://WWW.YOUTUBE.COM/WATCH?V=QVR1DWYOG44[/EMBED]
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-power on time: 15665 h	
control system: fanuc 0i-md	
table: 1320 x 560 mm	
number of axes: 3	
travel distances:	
x: 1200 mm	
y: 600 mm	
z: 650 mm	
speed range: 8000 rpm	
spindle taper: iso 40	
rapid traverse:	
(x / y / z axes) 30 m/min	
distance from spindle nose to table:	
110 to 750 mm	
max. table load: 1400 kg	
tool changer positions: 32	
max. tool diameter: 80 mm	
max. tool length: 300 mm	
max. tool weight: 18 kg	
machine dimensions:	
3300 x 2615 x 2915 mm	
machine weight: 8200 kg	
accessories:	
cooling centre	
availability: 01.02.2019 POWER ON TIME: 15665 H CONTROL SYSTEM: FANUC 0I-MD TABLE: 1320 X 560 MM NUMBER OF AXES: 3 TRAVEL DISTANCES: X: 1200 MM Y: 600 MM Z: 650 MM SPEED RANGE: 8000 RPM SPINDLE TAPER: ISO 40 RAPID TRAVERSE: (X / Y / Z AXES) 30 M/MIN DISTANCE FROM SPINDLE NOSE TO TABLE: 110 TO 750 MM MAX. TABLE LOAD: 1400 KG TOOL CHANGER POSITIONS: 32 MAX. TOOL DIAMETER: 80 MM MAX. TOOL LENGTH: 300 MM MAX. TOOL WEIGHT: 18 KG MACHINE DIMENSIONS: 3300 X 2615 X 2915 MM MACHINE WEIGHT: 8200 KG ACCESSORIES: COOLING CENTRE AVAILABILITY: 01.02.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-perfect condition

was working on an harford lg1000 with fanuc ai 1000.

<img class=alignnone size-full wp-image-12804 src=https://remiswiss.com/wp-content/uploads/2018/12/photo-2018-12-05-09-57-59.jpg alt= width=1600 height=900 />

<a href=http://www.gsaplus.com.tw/e/products_17_1.html>http://www.gsaplus.com.tw/e/products_17_1.html</a>

 

 

  PERFECT CONDITION WAS WORKING ON AN HARFORD LG1000 WITH FANUC AI 1000. WIDTH=1600 HTTP://WWW.GSAPLUS.COM.TW/E/PRODUCTS_17_1.HTML &NBSP; &NBSP; &NBSP;
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-power on time: 40805 h	
2018 spindle was repaired	
tool changer positions: 32	
control system: fanuc 21i-mb	
table: 1200 x 540 mm	
number of axes: 3	
travel distances:	
x: 1000 mm	
y: 500 mm	
z: 600 mm	
rapid traverser rate:	
(x / y / z)30 / 30 / 24 m/min	
max. table load: 800 kg	
spindle speed: 8000 u/min	
tool holder: iso 40	
engine power: 15/11 kw	
machine dimensions:	
2467 x 3350 x 2800 mm	
machine weight: 7000 kg	
availability: 01.02.2019 POWER ON TIME: 40805 H 2018 SPINDLE WAS REPAIRED TOOL CHANGER POSITIONS: 32 CONTROL SYSTEM: FANUC 21I-MB TABLE: 1200 X 540 MM NUMBER OF AXES: 3 TRAVEL DISTANCES: X: 1000 MM Y: 500 MM Z: 600 MM RAPID TRAVERSER RATE: (X / Y / Z)30 / 30 / 24 M/MIN MAX. TABLE LOAD: 800 KG SPINDLE SPEED: 8000 U/MIN TOOL HOLDER: ISO 40 ENGINE POWER: 15/11 KW MACHINE DIMENSIONS: 2467 X 3350 X 2800 MM MACHINE WEIGHT: 7000 KG AVAILABILITY: 01.02.2019
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-turning diameter: 340 mm<br/>turning length: 250 mm<br/>control: fanuc s21-t <br/>x-axis: 150 mm<br/>z-axis: 300 mm<br/>spindle bore: 53 mm<br/>turning speeds: 0-6000 u/min<br/>rapid traverse: 12 m/min<br/>turret: 8-fach <br/>tool adaptor: vdi 30 <br/>total power requirement:  kw<br/>weight of the machine ca.: 2,4 t<br/>dimensions of the machine ca.: 2,2x1,4x2,0 m<br/>without bar loader<br/>with a lot of accessories (as seen on pictures)<br/><br/><br/><br/><br/> TURNING DIAMETER: 340 MM
TURNING LENGTH: 250 MM
CONTROL: FANUC S21-T
X-AXIS: 150 MM
Z-AXIS: 300 MM
SPINDLE BORE: 53 MM
TURNING SPEEDS: 0-6000 U/MIN
RAPID TRAVERSE: 12 M/MIN
TURRET: 8-FACH
TOOL ADAPTOR: VDI 30
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 2,4 T
DIMENSIONS OF THE MACHINE CA.: 2,2X1,4X2,0 M
WITHOUT BAR LOADER
WITH A LOT OF ACCESSORIES (AS SEEN ON PICTURES)




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-control fanuc series oi-tc
turning diameter 350 mm
turning diameter over bed 650 mm
turning length 300 mm
spindle speed 4000 1 / min
12-station turret
tailstock
chip conveyor CONTROL FANUC SERIES OI-TC TURNING DIAMETER 350 MM TURNING DIAMETER OVER BED 650 MM TURNING LENGTH 300 MM SPINDLE SPEED 4000 1 / MIN 12-STATION TURRET TAILSTOCK CHIP CONVEYOR
Vendedor: WMH24
Año de construcción: usado
Precio: used machinery auction RESALE 17.900 €
Ubicación: Land-weight approx.: 3000 kg<br/>turning diameter: 90 mm<br/>control: fanuc series 18i <br/>turning length: 100 mm<br/>dimensions (l x w x h) approx.: 3250 x 1700 x 2100 mm<br/>number of places for driven tools: 12 <br/>turning speed range: 1180 - 6300 rpm<br/>spindle bore: 63 mm<br/>total power requirement: 11 kw<br/>description: <b><u>graziano sprint 42 cnc lathe</u></b><br> <br> - manufacturer: graziano<br> - type: sprint 42<br> - year of manufacture: 2003<br> - serial number: 936010<br> - control unit: fanuc series 18i<br> <br> - main spindle nose: asa 5 <br> - turning speed: 1180 - 6300 rpm<br> - power: 11 kw<br> - spindle hole diameter: 63 mm<br> - front bearing diameter: 85 mm<br> <br> <b><u>secondary spindle</u></b><br> - turning speed: 6300 rpm<br> - power: 3,7 kw<br> - spindle hole diameter: 32,5 mm<br> - front bearing diameter: 65 mm<br> - max turnable diameter: 90 mm<br> - max turnable lenght: 100 mm<br> - distance between noses: 420 mm<br> - number of tools: 12, all can be powered<br> WEIGHT APPROX.: 3000 KG
TURNING DIAMETER: 90 MM
CONTROL: FANUC SERIES 18I
TURNING LENGTH: 100 MM
DIMENSIONS (L X W X H) APPROX.: 3250 X 1700 X 2100 MM
NUMBER OF PLACES FOR DRIVEN TOOLS: 12
TURNING SPEED RANGE: 1180 - 6300 RPM
SPINDLE BORE: 63 MM
TOTAL POWER REQUIREMENT: 11 KW
DESCRIPTION: GRAZIANO SPRINT 42 CNC LATHE

- MANUFACTURER: GRAZIANO
- TYPE: SPRINT 42
- YEAR OF MANUFACTURE: 2003
- SERIAL NUMBER: 936010
- CONTROL UNIT: FANUC SERIES 18I

- MAIN SPINDLE NOSE: ASA 5
- TURNING SPEED: 1180 - 6300 RPM
- POWER: 11 KW
- SPINDLE HOLE DIAMETER: 63 MM
- FRONT BEARING DIAMETER: 85 MM

SECONDARY SPINDLE
- TURNING SPEED: 6300 RPM
- POWER: 3,7 KW
- SPINDLE HOLE DIAMETER: 32,5 MM
- FRONT BEARING DIAMETER: 65 MM
- MAX TURNABLE DIAMETER: 90 MM
- MAX TURNABLE LENGHT: 100 MM
- DISTANCE BETWEEN NOSES: 420 MM
- NUMBER OF TOOLS: 12, ALL CAN BE POWERED
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-screw size is 32mm 
injection speed is 330mm/s.2mm.
clamp force: 1800 kn SCREW SIZE IS 32MM INJECTION SPEED IS 330MM/S.2MM. CLAMP FORCE: 1800 KN
Vendedor: BASTA
Año de construcción: usado
Ubicación: Land-<strong>state: machine will be refurbished
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> STATE: MACHINE WILL BE REFURBISHED IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Ubicación: Land-table clamping surface: 920 x 435 mmmax. spindle speed: 80-8000 1 / min. weight: 5000 kg
the machine is in good technical condition, the possibility of testing, by prior arrangement. nastr. the renishaw ts-27r-probe, the front of the measuring tool - controlled by the m function processing. renishaw omt-60-probe for workpiece dimensions and orientation, conveyor belts for chips in the tank, ã?lskimmer, zweiarmiges-atc, 30-tool magazine, high-pressure spindle cooling with filter - 12 bar, fanuc 0i manual color 10, 4 TABLE CLAMPING SURFACE: 920 X 435 MMMAX. SPINDLE SPEED: 80-8000 1 / MIN. WEIGHT: 5000 KG THE MACHINE IS IN GOOD TECHNICAL CONDITION, THE POSSIBILITY OF TESTING, BY PRIOR ARRANGEMENT. NASTR. THE RENISHAW TS-27R-PROBE, THE FRONT OF THE MEASURING TOOL - CONTROLLED BY THE M FUNCTION PROCESSING. RENISHAW OMT-60-PROBE FOR WORKPIECE DIMENSIONS AND ORIENTATION, CONVEYOR BELTS FOR CHIPS IN THE TANK, &ATILDE;?LSKIMMER, ZWEIARMIGES-ATC, 30-TOOL MAGAZINE, HIGH-PRESSURE SPINDLE COOLING WITH FILTER - 12 BAR, FANUC 0I MANUAL COLOR 10, 4
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-
machine type machining center - vertical make mori seiki type mv 65 a year 1990 control type cnc storage france country of origin japan delivery immediately cargo base from site technical details
x way 1260 mm y way 650 mm z trail 650 mm cnc fanuc om table size 1,700 x 650 mm of maximum table load of 2,000 kg number of t-grooves 6 t-slots - distance 100 mm t slot width 18 mm speed range - milling 6000 rpm tool holder bt 40 werkzeugwechsl he 40 pos. 
spindle bearing diameter 100 mm rapid traverse x axis 15 m / min rapid traverse y axis 15 m / min rapid traverse z axis 12 m / min feed rate 1 5,000 mm/min tip speed 1 - 1.260 mm/min-max tool diameter 120 mm max werkzeugdurch. free neighboring box. 240 mm maximum tool length 350 mm of maximum tool weight 20 kg tool change time 3 sec power - milling spindle 15 / 11 kw total power requirement 42 kva machine weight approx. 13.3 t space approx. 4.5 x 3.3 x 2.9 m accessories fanuc om
coolant system electr. wheel spaeneforderer 
 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE MV 65 A YEAR 1990 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECHNICAL DETAILS X WAY 1260 MM Y WAY 650 MM Z TRAIL 650 MM CNC FANUC OM TABLE SIZE 1,700 X 650 MM OF MAXIMUM TABLE LOAD OF 2,000 KG NUMBER OF T-GROOVES 6 T-SLOTS - DISTANCE 100 MM T SLOT WIDTH 18 MM SPEED RANGE - MILLING 6000 RPM TOOL HOLDER BT 40 WERKZEUGWECHSL HE 40 POS. SPINDLE BEARING DIAMETER 100 MM RAPID TRAVERSE X AXIS 15 M / MIN RAPID TRAVERSE Y AXIS 15 M / MIN RAPID TRAVERSE Z AXIS 12 M / MIN FEED RATE 1 5,000 MM/MIN TIP SPEED 1 - 1.260 MM/MIN-MAX TOOL DIAMETER 120 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 240 MM MAXIMUM TOOL LENGTH 350 MM OF MAXIMUM TOOL WEIGHT 20 KG TOOL CHANGE TIME 3 SEC POWER - MILLING SPINDLE 15 / 11 KW TOTAL POWER REQUIREMENT 42 KVA MACHINE WEIGHT APPROX. 13.3 T SPACE APPROX. 4.5 X 3.3 X 2.9 M ACCESSORIES FANUC OM COOLANT SYSTEM ELECTR. WHEEL SPAENEFORDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 220 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-
machine type machining center - vertical make mori seiki type mv 65 b year of 1992 control type cnc storage france country of origin japan delivery immediately cargo base from site technical details

x way 1,524 mm y way 650 mm z trail 650 mm cnc fanuc 16 m table size 1,700 x 650 mm of maximum table load of 2,000 kg number of t-grooves 6 t-slots - distance 100 mm t slot width 18 mm speed range - milling 6000 rpm tool holder sk 40 werkzeugwec hsler 40 pos. 
spindle bearing diameter 100 mm rapid traverse x axis 15 m / min rapid traverse y axis 15 m / min rapid traverse z axis 12 m / min feed rate 1 5,000 mm/min tip speed 1 - 1.260 mm/min-max tool diameter 120 mm max werkzeugdurch. free neighboring box. 240 mm maximum tool length 350 mm of maximum tool weight 20 kg tool change time 3 sec power - milling spindle 15 / 11 kw total power requirement 42 kva machine weight 13.3 tons of space approx. 4.5 x 3.3 x 2.9 m accessories coolant system. handwheel additional information

machining center - vertical
 mori seiki mv 65b
 cnc fanuc 16 m
 with 4 axis part of apparatus
spaenefoederer MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE MV 65 B YEAR OF 1992 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASE FROM SITE TECHNICAL DETAILS X WAY 1,524 MM Y WAY 650 MM Z TRAIL 650 MM CNC FANUC 16 M TABLE SIZE 1,700 X 650 MM OF MAXIMUM TABLE LOAD OF 2,000 KG NUMBER OF T-GROOVES 6 T-SLOTS - DISTANCE 100 MM T SLOT WIDTH 18 MM SPEED RANGE - MILLING 6000 RPM TOOL HOLDER SK 40 WERKZEUGWEC HSLER 40 POS. SPINDLE BEARING DIAMETER 100 MM RAPID TRAVERSE X AXIS 15 M / MIN RAPID TRAVERSE Y AXIS 15 M / MIN RAPID TRAVERSE Z AXIS 12 M / MIN FEED RATE 1 5,000 MM/MIN TIP SPEED 1 - 1.260 MM/MIN-MAX TOOL DIAMETER 120 MM MAX WERKZEUGDURCH. FREE NEIGHBORING BOX. 240 MM MAXIMUM TOOL LENGTH 350 MM OF MAXIMUM TOOL WEIGHT 20 KG TOOL CHANGE TIME 3 SEC POWER - MILLING SPINDLE 15 / 11 KW TOTAL POWER REQUIREMENT 42 KVA MACHINE WEIGHT 13.3 TONS OF SPACE APPROX. 4.5 X 3.3 X 2.9 M ACCESSORIES COOLANT SYSTEM. HANDWHEEL ADDITIONAL INFORMATION MACHINING CENTER - VERTICAL MORI SEIKI MV 65B CNC FANUC 16 M WITH 4 AXIS PART OF APPARATUS SPAENEFOEDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 185 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cnc lathe hwacheon hi-tech 200 b mc
bj. 2011
control: fanuc 0i-td control with manual guide i bdzhlrlzie
12 x turret with direction logic, direct recording - powered tools, 12 stations, 3, 7kw 0.001 â° positioning and spindle brake, as well as direct threading, rapid traverse 50 rpm 3 jaw chuck 254 mm tailstock can be manually positioned / quill programmable coolant system increased coolant pump
slat conveyors tool measurement machine CNC LATHE HWACHEON HI-TECH 200 B MC BJ. 2011 CONTROL: FANUC 0I-TD CONTROL WITH MANUAL GUIDE I BDZHLRLZIE 12 X TURRET WITH DIRECTION LOGIC, DIRECT RECORDING - POWERED TOOLS, 12 STATIONS, 3, 7KW 0.001 &ACIRC;&DEG; POSITIONING AND SPINDLE BRAKE, AS WELL AS DIRECT THREADING, RAPID TRAVERSE 50 RPM 3 JAW CHUCK 254 MM TAILSTOCK CAN BE MANUALLY POSITIONED / QUILL PROGRAMMABLE COOLANT SYSTEM INCREASED COOLANT PUMP SLAT CONVEYORS TOOL MEASUREMENT MACHINE
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-2004
fanuc control
turning diameter 490 mm
rotating diameter 600 mm
turning length 670 mm
x-axis stroke 255 mm
stroke z axis 670 mm
12 positions turret 
spindle speed 4000
power 5.5 
main spindle
diameter inner mandrel tube 76 mm 
max turning diameter from 65 mm bar 
spindle nose asa 6 2004 FANUC CONTROL TURNING DIAMETER 490 MM ROTATING DIAMETER 600 MM TURNING LENGTH 670 MM X-AXIS STROKE 255 MM STROKE Z AXIS 670 MM 12 POSITIONS TURRET SPINDLE SPEED 4000 POWER 5.5 MAIN SPINDLE DIAMETER INNER MANDREL TUBE 76 MM MAX TURNING DIAMETER FROM 65 MM BAR SPINDLE NOSE ASA 6 " SPINDLE SPEED 4500 RPM POWER 20 KW TORQUE 286 NM COUNTER DIAMETER INNER MANDREL TUBE 55 MM MAX TURNING DIAMETER 45 MM BAR SPINDLE NOSE ASA 5 " SPINDLE SPEED 5000 RPM POWER 17 KW TORQUE 159 NM MACHINE WEIGHT 6000 KG
Vendedor: Industrialbay
Año de construcción: usado
Precio: 450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-wire edm machine matra-fanuc tape-cut m:
year: 06/1986
edm height: 200 mm
travel: 500 x 300 mm
wide range of accessories and spare parts range
 WIRE EDM MACHINE MATRA-FANUC TAPE-CUT M: YEAR: 06/1986 EDM HEIGHT: 200 MM TRAVEL: 500 X 300 MM WIDE RANGE OF ACCESSORIES AND SPARE PARTS RANGE
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-cnc control system CNC CONTROL SYSTEM
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year of construction 1998
cnc fanuc 0-t
traverse paths x 275 mm z 400 mm
work spindle 50-4,500 rpm
circulation over bed 320 mm
tip height 190 mm
spindle passage 42 mm
spindle bore 60 mm
turret 12 x 30
weight 3500 kg

accessories:
part catcher
collet chuck
short bar loader breuning rbk72112
various reducing pipes for spindle YEAR OF CONSTRUCTION 1998 CNC FANUC 0-T TRAVERSE PATHS X 275 MM Z 400 MM WORK SPINDLE 50-4,500 RPM CIRCULATION OVER BED 320 MM TIP HEIGHT 190 MM SPINDLE PASSAGE 42 MM SPINDLE BORE 60 MM TURRET 12 X 30 WEIGHT 3500 KG ACCESSORIES: PART CATCHER COLLET CHUCK SHORT BAR LOADER BREUNING RBK72112 VARIOUS REDUCING PIPES FOR SPINDLE
Vendedor: CNC Bote Johann Demmel
Año de construcción: usado
Precio: 1.450 €
Ubicación: Land-cnc control system CNC CONTROL SYSTEM
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 180.000 €
Ubicación: Land-engine details

stock number 1105-02525 machine type machining center - horizontal make doosan daewoo type hm 8000 built 4/2011 control type cnc storage france origin korrea delivery time upon request freight base from site technical details

x trail 1250 mm y way 1075 mm z-way 1200 mm pallet number 2 pallet size 800 x 800 mm pallet load 1600 kg pallet change time 10 sec b-axis table indexing 0.001 â° feeds 0.1 - 10000 mm / min rapid traverse 24000 mm/min spindle drive 37/30 kw spindle speeds 10  -3 getribestuffe 6000 rpm torque on the spindle 1066 nm tool magazine positions 120 fold sleeve bt 50 cnc fanuc 31 i additional information

cnc horizontal machining center with 2 pallet 800 x 800 mm
 fanuc 31 i
 away 1250 x 1075 x 1200 mm
 facilities:
 spindle coolant 50 bar;
 chip conveyors;
 tool time monitoring;

direct threading;
 band filter unit;
 flushing cooling;
 ENGINE DETAILS STOCK NUMBER 1105-02525 MACHINE TYPE MACHINING CENTER - HORIZONTAL MAKE DOOSAN DAEWOO TYPE HM 8000 BUILT 4/2011 CONTROL TYPE CNC STORAGE FRANCE ORIGIN KORREA DELIVERY TIME UPON REQUEST FREIGHT BASE FROM SITE TECHNICAL DETAILS X TRAIL 1250 MM Y WAY 1075 MM Z-WAY 1200 MM PALLET NUMBER 2 PALLET SIZE 800 X 800 MM PALLET LOAD 1600 KG PALLET CHANGE TIME 10 SEC B-AXIS TABLE INDEXING 0.001 &ACIRC;&DEG; FEEDS 0.1 - 10000 MM / MIN RAPID TRAVERSE 24000 MM/MIN SPINDLE DRIVE 37/30 KW SPINDLE SPEEDS 10 -3 GETRIBESTUFFE 6000 RPM TORQUE ON THE SPINDLE 1066 NM TOOL MAGAZINE POSITIONS 120 FOLD SLEEVE BT 50 CNC FANUC 31 I ADDITIONAL INFORMATION CNC HORIZONTAL MACHINING CENTER WITH 2 PALLET 800 X 800 MM FANUC 31 I AWAY 1250 X 1075 X 1200 MM FACILITIES: SPINDLE COOLANT 50 BAR; CHIP CONVEYORS; TOOL TIME MONITORING; DIRECT THREADING; BAND FILTER UNIT; FLUSHING COOLING;
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 980 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-engine details

stock number 1105-02523 machine type machining center - vertical make mori seiki type mv 40b year 1994 control type cnc storage france country of origin japan delivery immediately cargo base ex work technical details

x trail 800 mm y way 410 mm z-way 460 mm control msc 500 (fanuc 16m) rapid traverse x/y/z 20/20/15 m / min table size 900 x 450 mm tools magazine: 20 bt 40 tool diameter 80 mm maximum tool length 250 mm maximum tool weight 8 kg spindle speed 8000 1/min lockers actuator 5.5 kw total power 19 kw machine weight 4.3 tons of space approximately 2.48 x 2.25 x 2.8 m additional information

good maschie only 1 shifts run
 control fanuc 16 m ENGINE DETAILS STOCK NUMBER 1105-02523 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE MORI SEIKI TYPE MV 40B YEAR 1994 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS X TRAIL 800 MM Y WAY 410 MM Z-WAY 460 MM CONTROL MSC 500 (FANUC 16M) RAPID TRAVERSE X/Y/Z 20/20/15 M / MIN TABLE SIZE 900 X 450 MM TOOLS MAGAZINE: 20 BT 40 TOOL DIAMETER 80 MM MAXIMUM TOOL LENGTH 250 MM MAXIMUM TOOL WEIGHT 8 KG SPINDLE SPEED 8000 1/MIN LOCKERS ACTUATOR 5.5 KW TOTAL POWER 19 KW MACHINE WEIGHT 4.3 TONS OF SPACE APPROXIMATELY 2.48 X 2.25 X 2.8 M ADDITIONAL INFORMATION GOOD MASCHIE ONLY 1 SHIFTS RUN CONTROL FANUC 16 M
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: accuway
model: ul 15
year of manufacture: 2007
control: fanuc 0i-tc
turning diameter [mm]: 330
turning length [mm]: 300
spindle transmission rate [mm]: 52 spindle:
speed: 4.500 rpm
power: 15 kw
spindle passage: 52 mm

tool carrier (x/z):
technology: revolver with 12 stations
tool holder: bmt
x/z axis travel: 175/350 mm
rapid traverse x/z axis: 20 m / min

tailstock:
technology: reistock with quill
travel quill: 80 mm
quill diameter: 70 mm
taper: mk4 equipment / accessories:
tool measurement: measuring arm, renishaw fp4
chip disposal: chip conveyor
coolant supply: kss system
finished parts management: part of tray with conveyor belt
extraction: mechanical oil mist separators
tool holder: various shots
clamping device: 1 x collet chuck, 1 x 3 - jaw chuck
other facilities: div collets & baking, chip buckets
 MANUFACTURER: ACCUWAY MODEL: UL 15 YEAR OF MANUFACTURE: 2007 CONTROL: FANUC 0I-TC TURNING DIAMETER [MM]: 330 TURNING LENGTH [MM]: 300 SPINDLE TRANSMISSION RATE [MM]: 52 SPINDLE: SPEED: 4.500 RPM POWER: 15 KW SPINDLE PASSAGE: 52 MM TOOL CARRIER (X/Z): TECHNOLOGY: REVOLVER WITH 12 STATIONS TOOL HOLDER: BMT X/Z AXIS TRAVEL: 175/350 MM RAPID TRAVERSE X/Z AXIS: 20 M / MIN TAILSTOCK: TECHNOLOGY: REISTOCK WITH QUILL TRAVEL QUILL: 80 MM QUILL DIAMETER: 70 MM TAPER: MK4 EQUIPMENT / ACCESSORIES: TOOL MEASUREMENT: MEASURING ARM, RENISHAW FP4 CHIP DISPOSAL: CHIP CONVEYOR COOLANT SUPPLY: KSS SYSTEM FINISHED PARTS MANAGEMENT: PART OF TRAY WITH CONVEYOR BELT EXTRACTION: MECHANICAL OIL MIST SEPARATORS TOOL HOLDER: VARIOUS SHOTS CLAMPING DEVICE: 1 X COLLET CHUCK, 1 X 3 - JAW CHUCK OTHER FACILITIES: DIV COLLETS & BAKING, CHIP BUCKETS
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Precio: 280 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-control                           ge fanuc il with dnc - interface 
laser type                        c 4000 model e 
laser power                       4 kw co 2 - gas by ge fanuc 
track width                       5,000 mm 
working width                     3,000 mm 

accessories: cool deltatherm

 CONTROL GE FANUC IL WITH DNC - INTERFACE LASER TYPE C 4000 MODEL E LASER POWER 4 KW CO 2 - GAS BY GE FANUC TRACK WIDTH 5,000 MM WORKING WIDTH 3,000 MM ACCESSORIES: COOL DELTATHERM
Vendedor: Beppo Bercht Werkzeugmaschinen
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 10.500 €
Ubicación: Land-data on the machine

machine type: robot industrial robot handling system
manufacturer: fanuc
model: lr mate 200 ib
year of construction: 2002
condition: like new (exhibition machine)

price
10.500 eur net plus vat fixed price

site
warstein, germany

reference number
m-fan-1218

description
we offer you, an industrial robot manufacturer fanuc

incl. teach pendant, complete control, and documentation.

robot type: a05b-1138-b201 (year of manufacture 05/2002)
control type: a05b-2442-b250 (year of manufacture 05/2002)

the robot has been used only for experimental purposes and is therefore in good condition. the robot that was last used two years ago without problems, to turn on the control we found that the robot needed a software update. current error message see last picture.

our offer is aimed at commercial persons covered in the sense of the gewerbeordnung gewo according to ⧠14.
the offer is subject to change reserved, sale. please enter your full contact details to get a quote with our terms and conditions and terms of payment. mistakes in the descriptions and offerings are subject to change! DATA ON THE MACHINE MACHINE TYPE: ROBOT INDUSTRIAL ROBOT HANDLING SYSTEM MANUFACTURER: FANUC MODEL: LR MATE 200 IB YEAR OF CONSTRUCTION: 2002 CONDITION: LIKE NEW (EXHIBITION MACHINE) PRICE 10.500 EUR NET PLUS VAT FIXED PRICE SITE WARSTEIN, GERMANY REFERENCE NUMBER M-FAN-1218 DESCRIPTION WE OFFER YOU, AN INDUSTRIAL ROBOT MANUFACTURER FANUC INCL. TEACH PENDANT, COMPLETE CONTROL, AND DOCUMENTATION. ROBOT TYPE: A05B-1138-B201 (YEAR OF MANUFACTURE 05/2002) CONTROL TYPE: A05B-2442-B250 (YEAR OF MANUFACTURE 05/2002) THE ROBOT HAS BEEN USED ONLY FOR EXPERIMENTAL PURPOSES AND IS THEREFORE IN GOOD CONDITION. THE ROBOT THAT WAS LAST USED TWO YEARS AGO WITHOUT PROBLEMS, TO TURN ON THE CONTROL WE FOUND THAT THE ROBOT NEEDED A SOFTWARE UPDATE. CURRENT ERROR MESSAGE SEE LAST PICTURE. OUR OFFER IS AIMED AT COMMERCIAL PERSONS COVERED IN THE SENSE OF THE GEWERBEORDNUNG GEWO ACCORDING TO &ACIRC;&SECT; 14. THE OFFER IS SUBJECT TO CHANGE RESERVED, SALE. PLEASE ENTER YOUR FULL CONTACT DETAILS TO GET A QUOTE WITH OUR TERMS AND CONDITIONS AND TERMS OF PAYMENT. MISTAKES IN THE DESCRIPTIONS AND OFFERINGS ARE SUBJECT TO CHANGE!
Vendedor: Maschinenhandel-Reuss GmbH & Co. KG
Año de construcción: usado
Precio: 2.550 €
Ubicación: Land-cnc control system CNC CONTROL SYSTEM
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-x: 5400 mm
y: 2600 mm
w: 1500 mm
b-axis: +/-105 °
c-axis: +/-200 °
table size: 5000 x 2000 mm
speed range: 1500-24000 rpm
spindle drive: 10 kw
spindle retainer: hsk 63 f
tool changer: 10-fold
control: fanuc 18i mb controller
becker vacuum pump: 250 m³/h

suitable for model construction, woodwork or aluminium machining, stop pin on the edge of the table - height 90 mm, blowing nozzle on the spindle head to blow out the milling chips, vacuum table, tabletop as new - was always covered with mdf panels, only less than half shifts run

total capacity: 28 kw
machine weight: 15000 kg
dimensions (w x d x h): 11 x 7 x 4.5 m

condition: very good 

accessories: 
16 holder
replacement spindle overhaul and not yet used
tribos automatic clamping system with various bushings
water cooler for the spindle  X: 5400 MM Y: 2600 MM W: 1500 MM B-AXIS: +/-105 ° C-AXIS: +/-200 ° TABLE SIZE: 5000 X 2000 MM SPEED RANGE: 1500-24000 RPM SPINDLE DRIVE: 10 KW SPINDLE RETAINER: HSK 63 F TOOL CHANGER: 10-FOLD CONTROL: FANUC 18I MB CONTROLLER BECKER VACUUM PUMP: 250 M³/H SUITABLE FOR MODEL CONSTRUCTION, WOODWORK OR ALUMINIUM MACHINING, STOP PIN ON THE EDGE OF THE TABLE - HEIGHT 90 MM, BLOWING NOZZLE ON THE SPINDLE HEAD TO BLOW OUT THE MILLING CHIPS, VACUUM TABLE, TABLETOP AS NEW - WAS ALWAYS COVERED WITH MDF PANELS, ONLY LESS THAN HALF SHIFTS RUN TOTAL CAPACITY: 28 KW MACHINE WEIGHT: 15000 KG DIMENSIONS (W X D X H): 11 X 7 X 4.5 M CONDITION: VERY GOOD ACCESSORIES: 16 HOLDER REPLACEMENT SPINDLE OVERHAUL AND NOT YET USED TRIBOS AUTOMATIC CLAMPING SYSTEM WITH VARIOUS BUSHINGS WATER COOLER FOR THE SPINDLE
Vendedor: Alfred Feldmann Werkzeugmaschinen
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine type:
cnc centerless grinding machine

make/model:
mikrosa kronos m

specs

cnc fanuc 21im

grinding wheel max sizes: 250mm wide x 610mm diameter
2 controlled axis on grinding wheel dressing (interpolated)
1 axis on regulating wheel
1 axis on plunge axis (workpiece diameter) 
throughfeed grinding: yes
plunge grinding: yes

can be inspected under power in our warehouse in gussago bs (italy) MACHINE TYPE: CNC CENTERLESS GRINDING MACHINE MAKE/MODEL: MIKROSA KRONOS M SPECS CNC FANUC 21IM GRINDING WHEEL MAX SIZES: 250MM WIDE X 610MM DIAMETER 2 CONTROLLED AXIS ON GRINDING WHEEL DRESSING (INTERPOLATED) 1 AXIS ON REGULATING WHEEL 1 AXIS ON PLUNGE AXIS (WORKPIECE DIAMETER) THROUGHFEED GRINDING: YES PLUNGE GRINDING: YES CAN BE INSPECTED UNDER POWER IN OUR WAREHOUSE IN GUSSAGO BS (ITALY)
Vendedor: Mimu Werkzeugmaschinen
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 27.000 €
Ubicación: Land- 
machine type machining center - vertical make hartford type lg 1000 s built in 2006 control type cnc storage france country of origin taiwan delivery immediately cargo base ex work technical details

x way 1000 mm y-way 600 mm z-way 630 mm table size 1150 x 600 mm speed range - milling 10000 rpm control fanuc hartrol i 100 - spindle 11 kw bt 40 tool holder number of tool magazine stations 20 stations feed range 1-100 00 mm/min rapid traverse: 20 m/min total power 25 kw machine weight approx. 5800 kg space requirement approx. 2300 x 2200 x 2600 mm accessories

full protection - fairing complete machine documentation central lubrication rs 232 data interface central lubrication system additional information

very nice
 control fanuc hartrol ai 100 MACHINE TYPE MACHINING CENTER - VERTICAL MAKE HARTFORD TYPE LG 1000 S BUILT IN 2006 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY CARGO BASE EX WORK TECHNICAL DETAILS X WAY 1000 MM Y-WAY 600 MM Z-WAY 630 MM TABLE SIZE 1150 X 600 MM SPEED RANGE - MILLING 10000 RPM CONTROL FANUC HARTROL I 100 - SPINDLE 11 KW BT 40 TOOL HOLDER NUMBER OF TOOL MAGAZINE STATIONS 20 STATIONS FEED RANGE 1-100 00 MM/MIN RAPID TRAVERSE: 20 M/MIN TOTAL POWER 25 KW MACHINE WEIGHT APPROX. 5800 KG SPACE REQUIREMENT APPROX. 2300 X 2200 X 2600 MM ACCESSORIES FULL PROTECTION - FAIRING COMPLETE MACHINE DOCUMENTATION CENTRAL LUBRICATION RS 232 DATA INTERFACE CENTRAL LUBRICATION SYSTEM ADDITIONAL INFORMATION VERY NICE CONTROL FANUC HARTROL AI 100
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-turning diameter: 460 mm<br/>turning length: 900 mm<br/>control: fanuc 18 itb <br/>turning speeds: 4000 u/min<br/>chucking diameter: 210/250 mm<br/>output mainspindle: 30 kw<br/>bar passage: 52/77 mm<br/>c-axis:  <br/>hollow clamping cylinder:  <br/>3-jaw chuck: smw 210 <br/>3-jaw chuck: smw 250 <br/>tool turret: 12 fach<br/>tool taper: vdi 50 <br/>work piece power: 7,00 kw<br/>x-axis: 360 mm<br/>z-axis: 980 mm<br/>y-axis: -55 / +65 mm<br/>measuring probe: renishaw <br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> TURNING DIAMETER: 460 MM
TURNING LENGTH: 900 MM
CONTROL: FANUC 18 ITB
TURNING SPEEDS: 4000 U/MIN
CHUCKING DIAMETER: 210/250 MM
OUTPUT MAINSPINDLE: 30 KW
BAR PASSAGE: 52/77 MM
C-AXIS:
HOLLOW CLAMPING CYLINDER:
3-JAW CHUCK: SMW 210
3-JAW CHUCK: SMW 250
TOOL TURRET: 12 FACH
TOOL TAPER: VDI 50
WORK PIECE POWER: 7,00 KW
X-AXIS: 360 MM
Z-AXIS: 980 MM
Y-AXIS: -55 / +65 MM
MEASURING PROBE: RENISHAW
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-fanuc 18i-tb
max turning length 1020 mm
max turning ø 540 mm
bar capacity 65 mm
spindle nose a2-6
c-axis 0.001°
spindle speeds ~ 5000 rpm
spindle power 22 kw
subspindle speeds ~ 3500 rpm
milling spindle speeds ~ 10000 rpm
milling spindle power 18.5 kw
toolchanger capacity 20
tool taper capto c6
lower revolver bmt 65p
tool capacity 12 (all driven)
driven tools speeds ~ 4000 rpm
machine weight 12500 kg
dimensions ca. 4520 x 2300 x 2600 mm
 FANUC 18I-TB MAX TURNING LENGTH 1020 MM MAX TURNING ø 540 MM BAR CAPACITY 65 MM SPINDLE NOSE A2-6 C-AXIS 0.001° SPINDLE SPEEDS ~ 5000 RPM SPINDLE POWER 22 KW SUBSPINDLE SPEEDS ~ 3500 RPM MILLING SPINDLE SPEEDS ~ 10000 RPM MILLING SPINDLE POWER 18.5 KW TOOLCHANGER CAPACITY 20 TOOL TAPER CAPTO C6 LOWER REVOLVER BMT 65P TOOL CAPACITY 12 (ALL DRIVEN) DRIVEN TOOLS SPEEDS ~ 4000 RPM MACHINE WEIGHT 12500 KG DIMENSIONS CA. 4520 X 2300 X 2600 MM
Vendedor: Blachmix
Año de construcción: usado
Ubicación: Land-x-travel: 1300 mm<br/>y-travel: 1000 mm<br/>z-travel: 860 mm<br/>control: fanuc 11 mf <br/>tool taper: sk 50 <br/>tool changer: 60 x <br/>size of pallet: 1000 x 1000 mm<br/>numbers of pallets: 2 <br/>turning speeds: 10 - 4000 u/min<br/>capacity of spindle: 18,5/22 kw<br/>feed: 0,1 - 4000 mm/min<br/>rapid traverse: 12 m/min<br/>workpiece length: 470 mm<br/>diameter of tools max.: 125 mm<br/>weight of tools max.: 30 kg<br/>bearing diameter: 110 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 22,00 t<br/>dimensions of the machine ca.: 5,10 x 4,50 x 3,90 m<br/>chip conveyor:  <br/><br/><br/><br/>this ad was created with modul mws - the software solution of logotech.<br/> X-TRAVEL: 1300 MM
Y-TRAVEL: 1000 MM
Z-TRAVEL: 860 MM
CONTROL: FANUC 11 MF
TOOL TAPER: SK 50
TOOL CHANGER: 60 X
SIZE OF PALLET: 1000 X 1000 MM
NUMBERS OF PALLETS: 2
TURNING SPEEDS: 10 - 4000 U/MIN
CAPACITY OF SPINDLE: 18,5/22 KW
FEED: 0,1 - 4000 MM/MIN
RAPID TRAVERSE: 12 M/MIN
WORKPIECE LENGTH: 470 MM
DIAMETER OF TOOLS MAX.: 125 MM
WEIGHT OF TOOLS MAX.: 30 KG
BEARING DIAMETER: 110 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 22,00 T
DIMENSIONS OF THE MACHINE CA.: 5,10 X 4,50 X 3,90 M
CHIP CONVEYOR:



THIS AD WAS CREATED WITH MODUL MWS - THE SOFTWARE SOLUTION OF LOGOTECH.
Vendedor: Gerd Seidler Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-overview
brand: citizen
model: cincom a20 
application type: turning 
machine type: lathes 
availability: immediately 
production year: 2014 
location: spain
origin country: thailand 

general data
measurements width: 2120 mm 
measurements depth: 1240 mm 
measurements height: 1750 mm 
machine weight: 2550 kg

control unit
brand: fanuc
model: 32-ia
cnc main language: spanish
 cnc language customizable: yes

main drive
number of spindles: 2
spindle speed range: 6000 rpm

workpiece
workpiece drm: 31 mm 
workpiece x: 165 mm

tools
max tool diameter: 10 mm

media
main electronic connection: 400v/50hz 
power consumption: 9 kva

see full technical specifications of this machine at: abc://bit.ly/2rjpqwe OVERVIEW BRAND: CITIZEN MODEL: CINCOM A20 APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 2014 LOCATION: SPAIN ORIGIN COUNTRY: THAILAND GENERAL DATA MEASUREMENTS WIDTH: 2120 MM MEASUREMENTS DEPTH: 1240 MM MEASUREMENTS HEIGHT: 1750 MM MACHINE WEIGHT: 2550 KG CONTROL UNIT BRAND: FANUC MODEL: 32-IA CNC MAIN LANGUAGE: SPANISH CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 2 SPINDLE SPEED RANGE: 6000 RPM WORKPIECE WORKPIECE DRM: 31 MM WORKPIECE X: 165 MM TOOLS MAX TOOL DIAMETER: 10 MM MEDIA MAIN ELECTRONIC CONNECTION: 400V/50HZ POWER CONSUMPTION: 9 KVA SEE FULL TECHNICAL SPECIFICATIONS OF THIS MACHINE AT: ABC://BIT.LY/2RJPQWE
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 4.000 €
Ubicación: Land-weight approx.: 4500 kg<br/>dimensions (l x w x h) approx.: 3800 x 2900 x 2000 mm<br/>description: turning diameter over bed 420 mm, over support 300 mm, distance between the centers 520 mm, travels x-axis 200 mm, z-axis 530 mm, rapid traverse x-axis 20 m/min, z-axis 24 m/min, number of tool holder places 12, control fanuc seres 0-t WEIGHT APPROX.: 4500 KG
DIMENSIONS (L X W X H) APPROX.: 3800 X 2900 X 2000 MM
DESCRIPTION: TURNING DIAMETER OVER BED 420 MM, OVER SUPPORT 300 MM, DISTANCE BETWEEN THE CENTERS 520 MM, TRAVELS X-AXIS 200 MM, Z-AXIS 530 MM, RAPID TRAVERSE X-AXIS 20 M/MIN, Z-AXIS 24 M/MIN, NUMBER OF TOOL HOLDER PLACES 12, CONTROL FANUC SERES 0-T
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-a cnc lathe of manufacturer goodway is offers.
the machine is in good condition and can be seen like in our warehouse in hagen and tested

technical data:
manufacturer: goodway
type: gcl - 2l
year of construction: 1998
control: fanuc series 0-t

maximum turning diameter: 220 mm
swing over bed: 400 mm
circulation over carriage: 280 mm
turning diameter over support: 230 mm turning length: 600 mm

spindle bore: 66 mm
chuck diameter: 215 mm

space required: 3190 x 2000 x 1750 mm
weight: approx. 3,500 kg

free loading truck
visit any time by appointment only possible and desirable.
delivery possible. please enquire A CNC LATHE OF MANUFACTURER GOODWAY IS OFFERS. THE MACHINE IS IN GOOD CONDITION AND CAN BE SEEN LIKE IN OUR WAREHOUSE IN HAGEN AND TESTED TECHNICAL DATA: MANUFACTURER: GOODWAY TYPE: GCL - 2L YEAR OF CONSTRUCTION: 1998 CONTROL: FANUC SERIES 0-T MAXIMUM TURNING DIAMETER: 220 MM SWING OVER BED: 400 MM CIRCULATION OVER CARRIAGE: 280 MM TURNING DIAMETER OVER SUPPORT: 230 MM TURNING LENGTH: 600 MM SPINDLE BORE: 66 MM CHUCK DIAMETER: 215 MM SPACE REQUIRED: 3190 X 2000 X 1750 MM WEIGHT: APPROX. 3,500 KG FREE LOADING TRUCK VISIT ANY TIME BY APPOINTMENT ONLY POSSIBLE AND DESIRABLE. DELIVERY POSSIBLE. PLEASE ENQUIRE
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung
Año de construcción: usado
Ubicación: Land-turning diameter:380 mm<br/>turning length:600 mm<br/>control:fanuc ot <br/>max. bar diameter through the spindel:68 mm<br/>number of controlled axis:3 <br/>turning speed range:3200 u/min<br/>torque:550 nm<br/>power requirement:11/15 kw<br/>rapid speed:15/18 m/min<br/>number of tapers in turret head:10 vdi 40<br/>number of driven tools in turret:5 <br/>spindel speed of driven tools:3000 u/min<br/>spindelpower on driven tool:3,7/2,2 kw<br/>weight:6,0 t<br/>dimensions:4,3 x 1,67 x 1,98 m<br/><br/>cnc-lathe with boxway system and driven tools in very goog condition.  equipment:                 - chipconveyor                          - 3-jaw-chuck Ø 250 mm                 - some standart toolholders                 - tool measuring                 -tailstock                 - 4x driven tool holder TURNING DIAMETER:380 MM
TURNING LENGTH:600 MM
CONTROL:FANUC OT
MAX. BAR DIAMETER THROUGH THE SPINDEL:68 MM
NUMBER OF CONTROLLED AXIS:3
TURNING SPEED RANGE:3200 U/MIN
TORQUE:550 NM
POWER REQUIREMENT:11/15 KW
RAPID SPEED:15/18 M/MIN
NUMBER OF TAPERS IN TURRET HEAD:10 VDI 40
NUMBER OF DRIVEN TOOLS IN TURRET:5
SPINDEL SPEED OF DRIVEN TOOLS:3000 U/MIN
SPINDELPOWER ON DRIVEN TOOL:3,7/2,2 KW
WEIGHT:6,0 T
DIMENSIONS:4,3 X 1,67 X 1,98 M

CNC-LATHE WITH BOXWAY SYSTEM AND DRIVEN TOOLS IN VERY GOOG CONDITION. EQUIPMENT: - CHIPCONVEYOR - 3-JAW-CHUCK Ø 250 MM - SOME STANDART TOOLHOLDERS - TOOL MEASURING -TAILSTOCK - 4X DRIVEN TOOL HOLDER
Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc milling machine 3-axes, kira kv-3 mc
manufacturer: kira
type: ct 3 mc
year of construction: 1988
control: fanuc 0 m
speed: 8,000
travel (x-y-z): 510-380-460
hours of operation: 2271

accessories: - 18 x changer CNC MILLING MACHINE 3-AXES, KIRA KV-3 MC MANUFACTURER: KIRA TYPE: CT 3 MC YEAR OF CONSTRUCTION: 1988 CONTROL: FANUC 0 M SPEED: 8,000 TRAVEL (X-Y-Z): 510-380-460 HOURS OF OPERATION: 2271 ACCESSORIES: - 18 X CHANGER
Vendedor: Maschinenbörse MV GmbH
Año de construcción: usado
Ubicación: Land-<strong>state: machine will be refurbished
</strong>

ix-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> STATE: MACHINE WILL BE REFURBISHED IX-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)