19 ofertas

Año de construcción: usado
Ubicación: Land-qty 1 x pomini vic1.8-px1.6 tandem lab mixer, 
machine number 9912, date 1990,
modern frame design with unitized fabricated steel base,
anti friction roller bearings with floor lubrication, 
22kw dc variable speed motor. 
rotor speeds 0-230rpm
torque montioring sensors.
siemens plc control system with s7-300 cpu (combined with original s5).
desktop computer interface.

left hand mixer:
pomini px1.6 tangential rotor type, 
volume 1.6litre,
2 wing rotors, fy type bronze dust seals,
jacketed chamber for heating or cooling,
hard chrome plated chamber and rotors,
chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side),
pneumatic oil injector,
pneumatically operated discharge drop door with linear actuator, 
pneumatically operated hopper load door,
pneumatic ram with transducers fitted to monitor floating weight position. 
proportional ram pressure control.
thermocouple in chamber side.

right hand mixer:
pomini vic1.8 intermeshing rotor type,
volume 1.8litre, 
unidrive type gearbox (1:1 ratio)
fy type bronze dust seals,
jacketed chamber for heating or cooling,
hard chrome plated chamber and rotors,
chamber sides can manually swing open for cleaning/maintenance (by removing 4 bolts on each side),
pneumatic oil injector,
pneumatically operated discharge drop door with linear actuator, 
pneumatically operated hopper load door,
pneumatic ram with transducers fitted to monitor floating weight position. 
proportional ram pressure control.
thermocouple in chamber side.
variable rotor geometry clearance (motorised adjustment to vary distance between the rotors).

in good condition.   QTY 1 X POMINI VIC1.8-PX1.6 TANDEM LAB MIXER, MACHINE NUMBER 9912, DATE 1990, MODERN FRAME DESIGN WITH UNITIZED FABRICATED STEEL BASE, ANTI FRICTION ROLLER BEARINGS WITH FLOOR LUBRICATION, 22KW DC VARIABLE SPEED MOTOR. ROTOR SPEEDS 0-230RPM TORQUE MONTIORING SENSORS. SIEMENS PLC CONTROL SYSTEM WITH S7-300 CPU (COMBINED WITH ORIGINAL S5). DESKTOP COMPUTER INTERFACE. LEFT HAND MIXER: POMINI PX1.6 TANGENTIAL ROTOR TYPE, VOLUME 1.6LITRE, 2 WING ROTORS, FY TYPE BRONZE DUST SEALS, JACKETED CHAMBER FOR HEATING OR COOLING, HARD CHROME PLATED CHAMBER AND ROTORS, CHAMBER SIDES CAN MANUALLY SWING OPEN FOR CLEANING/MAINTENANCE (BY REMOVING 4 BOLTS ON EACH SIDE), PNEUMATIC OIL INJECTOR, PNEUMATICALLY OPERATED DISCHARGE DROP DOOR WITH LINEAR ACTUATOR, PNEUMATICALLY OPERATED HOPPER LOAD DOOR, PNEUMATIC RAM WITH TRANSDUCERS FITTED TO MONITOR FLOATING WEIGHT POSITION. PROPORTIONAL RAM PRESSURE CONTROL. THERMOCOUPLE IN CHAMBER SIDE. RIGHT HAND MIXER: POMINI VIC1.8 INTERMESHING ROTOR TYPE, VOLUME 1.8LITRE, UNIDRIVE TYPE GEARBOX (1:1 RATIO) FY TYPE BRONZE DUST SEALS, JACKETED CHAMBER FOR HEATING OR COOLING, HARD CHROME PLATED CHAMBER AND ROTORS, CHAMBER SIDES CAN MANUALLY SWING OPEN FOR CLEANING/MAINTENANCE (BY REMOVING 4 BOLTS ON EACH SIDE), PNEUMATIC OIL INJECTOR, PNEUMATICALLY OPERATED DISCHARGE DROP DOOR WITH LINEAR ACTUATOR, PNEUMATICALLY OPERATED HOPPER LOAD DOOR, PNEUMATIC RAM WITH TRANSDUCERS FITTED TO MONITOR FLOATING WEIGHT POSITION. PROPORTIONAL RAM PRESSURE CONTROL. THERMOCOUPLE IN CHAMBER SIDE. VARIABLE ROTOR GEOMETRY CLEARANCE (MOTORISED ADJUSTMENT TO VARY DISTANCE BETWEEN THE ROTORS). IN GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-this continuous hot strip rolling mill is ideal for high quality strip production starting from thick slabs. the hot strip mill takes the slabs from the reheat furnace and by reversing them through 3 roughing stands and then through 5 finishing stands which reduces them to a thickness range from 1,5 to 10,5 mm. material: carbon steel & stainless steel2 000 000 ton per year capacity = 166 666 ton per month capacityinput slab thickness range: 150 > 250 mminput slab width range: 600 > 1560 mminput slab length range: 4900 > 5500 mmoutput plate thickness range: 1,5 > 10,5 mmoutput plate width range: 600 > 1564 mmtotal roughing mill power: 12000 hptotal finishing mill power: 23500 hpprevious owner: usinor fr (now arcelor)equipment was dismantled by usinor. cleaning & reconditionning by danieli.currently stored in the port of antwerp & packaged ready for transporttotal net weight of equipment: 4337 ton – 5652 m3>> roughersr1 - 4hi united roughing mill stand 33”/ 51” x 66” (no pinion stand, no gearbox and no motor)r2 - 4hi clecim roughing mill stand 36”/ 53” x 66” with gearbox (1:6.32), 2x 4,000 hp at 145 - 290 rpm  dc motors with reactance (no pinion stand)r3 - 4hi united roughing mill stand 32”/ 53” x 66” with gearbox (1:9.71), 2x 4,000 hp at 500 rpm ac synchronous motors with  reactance (no pinion stand) >> finishing millsf1 - 4hi united finishing mill stand 25” / 49” x 66” with pinion stand and gearbox (1:5.61), 1x 4500 hp at 200 - 355 rpm dc motors with reactancef2 - 4hi united finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:3.17), 1x 5000 hp at 171  - 345 rpm dc motors with reactancef3 - 4hi united finishing mill stand 25” / 49” x  66” with pinion stand and gearbox (1:1.90), 1x 5000 hp at 155  - 310 rpm dc motors with reactancef4 - 4hi united finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 5000 hp at 108 - 230 rpm dc motors with reactancef5 - 4hi united finishing mill stand 25” / 49” x  66” with pinion stand - direct driven, 1x 4000 hp at 135 - 270 rpm dc motors with reactance>> roll grinders (optional)28” cincinnati roll grinding machine- max dia of rolls: 710 mm- max distance between peaks: 4270 mm- rotational motion of wheel: 25/30 hp – 600/800 rpm- head: 7,5 hp – 400/1600 rpm44” farrel roll grinding machine - max dia of rolls: 1549 mm- max distance between peaks: 5500 mm- forward motion of the grinding wheel: 2 hp – 1150 rpm- rotational motion of wheel: 40 hp – 1450/575 rpm- head: 15 hp – 300/1200 rpm- transmission: 3/5 hp – 300/800 rpmapproximalty 20 rollers between the roughers THIS CONTINUOUS HOT STRIP ROLLING MILL IS IDEAL FOR HIGH QUALITY STRIP PRODUCTION STARTING FROM THICK SLABS. THE HOT STRIP MILL TAKES THE SLABS FROM THE REHEAT FURNACE AND BY REVERSING THEM THROUGH 3 ROUGHING STANDS AND THEN THROUGH 5 FINISHING STANDS WHICH REDUCES THEM TO A THICKNESS RANGE FROM 1,5 TO 10,5 MM. MATERIAL: CARBON STEEL & STAINLESS STEEL2 000 000 TON PER YEAR CAPACITY = 166 666 TON PER MONTH CAPACITYINPUT SLAB THICKNESS RANGE: 150 > 250 MMINPUT SLAB WIDTH RANGE: 600 > 1560 MMINPUT SLAB LENGTH RANGE: 4900 > 5500 MMOUTPUT PLATE THICKNESS RANGE: 1,5 > 10,5 MMOUTPUT PLATE WIDTH RANGE: 600 > 1564 MMTOTAL ROUGHING MILL POWER: 12000 HPTOTAL FINISHING MILL POWER: 23500 HPPREVIOUS OWNER: USINOR FR (NOW ARCELOR)EQUIPMENT WAS DISMANTLED BY USINOR. CLEANING & RECONDITIONNING BY DANIELI.CURRENTLY STORED IN THE PORT OF ANTWERP & PACKAGED READY FOR TRANSPORTTOTAL NET WEIGHT OF EQUIPMENT: 4337 TON – 5652 M3>> ROUGHERSR1 - 4HI UNITED ROUGHING MILL STAND 33”/ 51” X 66” (NO PINION STAND, NO GEARBOX AND NO MOTOR)R2 - 4HI CLECIM ROUGHING MILL STAND 36”/ 53” X 66” WITH GEARBOX (1:6.32), 2X 4,000 HP AT 145 - 290 RPM  DC MOTORS WITH REACTANCE (NO PINION STAND)R3 - 4HI UNITED ROUGHING MILL STAND 32”/ 53” X 66” WITH GEARBOX (1:9.71), 2X 4,000 HP AT 500 RPM AC SYNCHRONOUS MOTORS WITH  REACTANCE (NO PINION STAND) >> FINISHING MILLSF1 - 4HI UNITED FINISHING MILL STAND 25” / 49” X 66” WITH PINION STAND AND GEARBOX (1:5.61), 1X 4500 HP AT 200 - 355 RPM DC MOTORS WITH REACTANCEF2 - 4HI UNITED FINISHING MILL STAND 25” / 49” X  66” WITH PINION STAND AND GEARBOX (1:3.17), 1X 5000 HP AT 171  - 345 RPM DC MOTORS WITH REACTANCEF3 - 4HI UNITED FINISHING MILL STAND 25” / 49” X  66” WITH PINION STAND AND GEARBOX (1:1.90), 1X 5000 HP AT 155  - 310 RPM DC MOTORS WITH REACTANCEF4 - 4HI UNITED FINISHING MILL STAND 25” / 49” X  66” WITH PINION STAND - DIRECT DRIVEN, 1X 5000 HP AT 108 - 230 RPM DC MOTORS WITH REACTANCEF5 - 4HI UNITED FINISHING MILL STAND 25” / 49” X  66” WITH PINION STAND - DIRECT DRIVEN, 1X 4000 HP AT 135 - 270 RPM DC MOTORS WITH REACTANCE>> ROLL GRINDERS (OPTIONAL)28” CINCINNATI ROLL GRINDING MACHINE- MAX DIA OF ROLLS: 710 MM- MAX DISTANCE BETWEEN PEAKS: 4270 MM- ROTATIONAL MOTION OF WHEEL: 25/30 HP – 600/800 RPM- HEAD: 7,5 HP – 400/1600 RPM44” FARREL ROLL GRINDING MACHINE - MAX DIA OF ROLLS: 1549 MM- MAX DISTANCE BETWEEN PEAKS: 5500 MM- FORWARD MOTION OF THE GRINDING WHEEL: 2 HP – 1150 RPM- ROTATIONAL MOTION OF WHEEL: 40 HP – 1450/575 RPM- HEAD: 15 HP – 300/1200 RPM- TRANSMISSION: 3/5 HP – 300/800 RPMAPPROXIMALTY 20 ROLLERS BETWEEN THE ROUGHERS
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-qty 1 x carter mk6 direct drive banbury internal mixer,
serial no. 237/11 (new chamber/hydraulic hopper in 2011/12),
hydraulic hopper,
chamber volume: 160l,
2 wing rotors,
ssa type dust stops,
hydraulic drop door with linear actuator,
pneumatic oil injector fitted to end frame,
hydraulic hopper,
piv semi unidrive gearbox (28:1 ratio), 310/620kw power rating, 728/1484rpm input speed, 26/53rpm output speed.
currently fitted with fixed speed motor fitted - 355kw, 744rpm to give rotor speed 26.5rpm.
complete with lubrication unit, hydraulic unit, electrical controls etc and in very good condition (inspection report carried out by farrel available on request). QTY 1 X CARTER MK6 DIRECT DRIVE BANBURY INTERNAL MIXER, SERIAL NO. 237/11 (NEW CHAMBER/HYDRAULIC HOPPER IN 2011/12), HYDRAULIC HOPPER, CHAMBER VOLUME: 160L, 2 WING ROTORS, SSA TYPE DUST STOPS, HYDRAULIC DROP DOOR WITH LINEAR ACTUATOR, PNEUMATIC OIL INJECTOR FITTED TO END FRAME, HYDRAULIC HOPPER, PIV SEMI UNIDRIVE GEARBOX (28:1 RATIO), 310/620KW POWER RATING, 728/1484RPM INPUT SPEED, 26/53RPM OUTPUT SPEED. CURRENTLY FITTED WITH FIXED SPEED MOTOR FITTED - 355KW, 744RPM TO GIVE ROTOR SPEED 26.5RPM. COMPLETE WITH LUBRICATION UNIT, HYDRAULIC UNIT, ELECTRICAL CONTROLS ETC AND IN VERY GOOD CONDITION (INSPECTION REPORT CARRIED OUT BY FARREL AVAILABLE ON REQUEST).
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand rebar production plant
mfc.:	danieli, pomini, farrel, allen bradley		built:	1973		
refurbished in 2015		stopped in 3/2018
entry billet dim.:	120, 130 & 140 mm square	length:	8.0 m
rebar dimensions:	dia. 8 – 32 mm		length:	6 – 14 m
capacity:		1200 – 1400 ton on 3 shifts
consist of:	re-heating furnace	roughing mill	flying shear 	
intermediate mill        finishing mill		finished monobloc	shears		winding lines
water treatment unit	fire protection system	high value in spare parts
 QTY. 1 SECOND-HAND REBAR PRODUCTION PLANT MFC.: DANIELI, POMINI, FARREL, ALLEN BRADLEY BUILT: 1973 REFURBISHED IN 2015 STOPPED IN 3/2018 ENTRY BILLET DIM.: 120, 130 & 140 MM SQUARE LENGTH: 8.0 M REBAR DIMENSIONS: DIA. 8 – 32 MM LENGTH: 6 – 14 M CAPACITY: 1200 – 1400 TON ON 3 SHIFTS CONSIST OF: RE-HEATING FURNACE ROUGHING MILL FLYING SHEAR INTERMEDIATE MILL FINISHING MILL FINISHED MONOBLOC SHEARS WINDING LINES WATER TREATMENT UNIT FIRE PROTECTION SYSTEM HIGH VALUE IN SPARE PARTS
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-1 x refurbished pomini farrel model p160 banbury internal mixer,
original year of manufacture 1984, rebuilt in 2017 (not used since),
mixing chamber volume 160l net,
batch size at 75%ff and sg 1.0 - 120kg,
2 wing rotors,  pyh hydraulic dust stops (new),
hydraulic drop door discharge with linear actuator and spade latch,
pneumatic hopper,
unidrive gearbox type nf160, rating 640hp,
input speed 1500 rpm, output 39.6rpm.
with 470kw, 500v dc variable speed motor.
 
mechanically complete but currently without electrical controls. 1 X REFURBISHED POMINI FARREL MODEL P160 BANBURY INTERNAL MIXER, ORIGINAL YEAR OF MANUFACTURE 1984, REBUILT IN 2017 (NOT USED SINCE), MIXING CHAMBER VOLUME 160L NET, BATCH SIZE AT 75%FF AND SG 1.0 - 120KG, 2 WING ROTORS, PYH HYDRAULIC DUST STOPS (NEW), HYDRAULIC DROP DOOR DISCHARGE WITH LINEAR ACTUATOR AND SPADE LATCH, PNEUMATIC HOPPER, UNIDRIVE GEARBOX TYPE NF160, RATING 640HP, INPUT SPEED 1500 RPM, OUTPUT 39.6RPM. WITH 470KW, 500V DC VARIABLE SPEED MOTOR. MECHANICALLY COMPLETE BUT CURRENTLY WITHOUT ELECTRICAL CONTROLS.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty 1 x farrel bridge 4 roll inverted l lab calender,
roll width: 381 mm
roll Ø: 152 mm
roller bearings
speed: 2,38 – 23,8   1/min., adjustable
nip adjustment: by hand
friction: 1:1 / 1:1,21
drive: 9,25 kw, 380 v
measurement: ca. 1.765 x 1.687 x 1.800 mm (l x w x h)
weight: ca. 1.800 kg in. control cabinet QTY 1 X FARREL BRIDGE 4 ROLL INVERTED L LAB CALENDER, ROLL WIDTH: 381 MM ROLL Ø: 152 MM ROLLER BEARINGS SPEED: 2,38 – 23,8   1/MIN., ADJUSTABLE NIP ADJUSTMENT: BY HAND FRICTION: 1:1 / 1:1,21 DRIVE: 9,25 KW, 380 V MEASUREMENT: CA. 1.765 X 1.687 X 1.800 MM (L X W X H) WEIGHT: CA. 1.800 KG IN. CONTROL CABINET
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-1 x farrel f370 mixer chamber and hopper
m/c no. 081110,
date: november 2009,
ssa dust stops,
4 wing rotors,
drop door with linear actuator,
base plate with toggle latch.
pneumatic hopper with extension neck (floating weight looks to be in good condition).

parts available: body, baseplate, toggle latch, actuator and pneumatic hopper with extension neck. 1 X FARREL F370 MIXER CHAMBER AND HOPPER M/C NO. 081110, DATE: NOVEMBER 2009, SSA DUST STOPS, 4 WING ROTORS, DROP DOOR WITH LINEAR ACTUATOR, BASE PLATE WITH TOGGLE LATCH. PNEUMATIC HOPPER WITH EXTENSION NECK (FLOATING WEIGHT LOOKS TO BE IN GOOD CONDITION). PARTS AVAILABLE: BODY, BASEPLATE, TOGGLE LATCH, ACTUATOR AND PNEUMATIC HOPPER WITH EXTENSION NECK.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-qty 1 x pomini model p270 banbury internal mixer,
m/c no. 362, year: 1996,
hdm style rotors (2 wing equivalent),
pyh dust stops,
hydraulic drop door discharge with linear actuator,
vickers hydraulic power pack,
unidrive gearbox with couplings (11d type, 1000hp rating).
pneumatic hopper.
without motor or controls.

can be supplied with or without gearbox.  quote for new motor and controls on request. QTY 1 X POMINI MODEL P270 BANBURY INTERNAL MIXER, M/C NO. 362, YEAR: 1996, HDM STYLE ROTORS (2 WING EQUIVALENT), PYH DUST STOPS, HYDRAULIC DROP DOOR DISCHARGE WITH LINEAR ACTUATOR, VICKERS HYDRAULIC POWER PACK, UNIDRIVE GEARBOX WITH COUPLINGS (11D TYPE, 1000HP RATING). PNEUMATIC HOPPER. WITHOUT MOTOR OR CONTROLS. CAN BE SUPPLIED WITH OR WITHOUT GEARBOX. QUOTE FOR NEW MOTOR AND CONTROLS ON REQUEST.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-1 x farrel banbury internal mixer, 
model 00c.  machine number: 91m7017, year: 1992,
stainless steel jacketed swing side (drop door design). 
maximum steam or water pressure 150psi, 
chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 
5 1 X FARREL BANBURY INTERNAL MIXER, MODEL 00C.  MACHINE NUMBER: 91M7017, YEAR: 1992, STAINLESS STEEL JACKETED SWING SIDE (DROP DOOR DESIGN). MAXIMUM STEAM OR WATER PRESSURE 150PSI, CHROME PLATED TWO WING CORED ROTORS WITH SPHERICAL ROLLER BEARINGS, GROSS CAPACITY OF MIXING CHAMBER 4.24 LITERS. 5" DIAMETER RAM CYLINDER, MAXIMUM PRESSURE 100PSI. CHROME PLATED SINGLE SLOPE V-BOTTOM, STAINLESS STEEL, PNEUMATICALLY OPERATED FRONT DOOR, F.Y.A. DUST STOPS, OIL SEALS, THERMOCOUPLE. WITH 65KW (87HP), 340/440 VOLT, 1500 RPM MOTOR, REDUCER RATIO 15:1. UNIT MOUNTED IN AN ENCLOSED CABINET WITH A PULL-OUT DISCHARGE DRAWER. IN VERY GOOD CONDITION. MACHINE TO BE SUPPLIED CHECKED OVER (OVERHAULED) AND FITTED WITH NEW ELECTRICAL CONTROLS INCLUDING SIEMENS S7-1200 PLC AND TOUCH SCREEN PC FOR AUTO/MANUAL MIXING AND RECIPE/DATA SAVING.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-farrel laboratory mill
hand operated nips
20hp, 15kw motor
1440rpm
friction 1:1 to 2:1
rotary joint for steam heating / water cooling
trays fitted beneath mill rolls FARREL LABORATORY MILL HAND OPERATED NIPS 20HP, 15KW MOTOR 1440RPM FRICTION 1:1 TO 2:1 ROTARY JOINT FOR STEAM HEATING / WATER COOLING TRAYS FITTED BENEATH MILL ROLLS
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-farrel bridge 4-roll, inclined 'z' calender.
66 inch roll face width, 28 inch diameter. 
rolls are current polished to produce matt pvc finish.
independent variable speed dc drive to each roll via solid state, ac to dc converter.  
cross axis control on roll 4 (roll 3 fixed).
extensively modified and up-graded controls and drives.
    FARREL BRIDGE 4-ROLL, INCLINED 'Z' CALENDER. 66 INCH ROLL FACE WIDTH, 28 INCH DIAMETER. ROLLS ARE CURRENT POLISHED TO PRODUCE MATT PVC FINISH. INDEPENDENT VARIABLE SPEED DC DRIVE TO EACH ROLL VIA SOLID STATE, AC TO DC CONVERTER. CROSS AXIS CONTROL ON ROLL 4 (ROLL 3 FIXED). EXTENSIVELY MODIFIED AND UP-GRADED CONTROLS AND DRIVES.
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-84” (2100mm) wide x 26” (650mm) diam. two roll mill
manuf: farrel bridge
hagglunds hydraulic motor and drive
with temperature control unit (tcu);
front roll smooth, back roll smooth
peripherally drilled rolls
electric heating
variable speed and friction ratio.
speed 0 to 35 rpm
cold water supply
with control panel 
mill was supplied and installed with the hydraulic system new in 1998
with manual (inc drawings) for both the mill and hydraulics (hard copy not electronic)
    84” (2100MM) WIDE X 26” (650MM) DIAM. TWO ROLL MILL MANUF: FARREL BRIDGE HAGGLUNDS HYDRAULIC MOTOR AND DRIVE WITH TEMPERATURE CONTROL UNIT (TCU); FRONT ROLL SMOOTH, BACK ROLL SMOOTH PERIPHERALLY DRILLED ROLLS ELECTRIC HEATING VARIABLE SPEED AND FRICTION RATIO. SPEED 0 TO 35 RPM COLD WATER SUPPLY WITH CONTROL PANEL MILL WAS SUPPLIED AND INSTALLED WITH THE HYDRAULIC SYSTEM NEW IN 1998 WITH MANUAL (INC DRAWINGS) FOR BOTH THE MILL AND HYDRAULICS (HARD COPY NOT ELECTRONIC)
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-farrel bridge 12” x 6” two roll mill 
hand operated nips
even & friction
tray fitted beneath mill rolls
complete with motor and starter
    FARREL BRIDGE 12” X 6” TWO ROLL MILL HAND OPERATED NIPS EVEN & FRICTION TRAY FITTED BENEATH MILL ROLLS COMPLETE WITH MOTOR AND STARTER
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-gearboxe for rubber mixers
suitable for hf gk-320e or farrel k7

year of construction: 1989, 2004 reconstruction on 1 speed, 2013 completely overhauled
power: 1300kw
speed: 1200 / 44.7 rpm, even speed

see appendix!  GEARBOXE FOR RUBBER MIXERS SUITABLE FOR HF GK-320E OR FARREL K7 YEAR OF CONSTRUCTION: 1989, 2004 RECONSTRUCTION ON 1 SPEED, 2013 COMPLETELY OVERHAULED POWER: 1300KW SPEED: 1200 / 44.7 RPM, EVEN SPEED SEE APPENDIX!
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-1 x farrel pomini model f160 banbury internal mixer,
original year of manufacture: 1980, but rebuilt in 2000 (very good condition),
chamber volume: 160l
net batch size: 120kg,
with 2 wing type rotors, rotor tips hard material coated and fully chrome plated
rotor speed max 50rpm,
pneumatic hopper,
hydraulic drop door,
fyh dust seals,
unidrive gearbox,
with 435kw dc variable speed motor and electrical controls (415v).
complete and in good condition. 
  1 X FARREL POMINI MODEL F160 BANBURY INTERNAL MIXER, ORIGINAL YEAR OF MANUFACTURE: 1980, BUT REBUILT IN 2000 (VERY GOOD CONDITION), CHAMBER VOLUME: 160L NET BATCH SIZE: 120KG, WITH 2 WING TYPE ROTORS, ROTOR TIPS HARD MATERIAL COATED AND FULLY CHROME PLATED ROTOR SPEED MAX 50RPM, PNEUMATIC HOPPER, HYDRAULIC DROP DOOR, FYH DUST SEALS, UNIDRIVE GEARBOX, WITH 435KW DC VARIABLE SPEED MOTOR AND ELECTRICAL CONTROLS (415V). COMPLETE AND IN GOOD CONDITION.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-pomini-farrell no.9 pcm230 continuous mixer
(farrel fcm no.9)
machine number 5
year 1993
net mixing volume 30.8 litres
max. torque 2864 kgm
standard drive gearbox type sp630
no. 40012
hp rating 1200
year of manuf: 1993
100/300 rpm
dc variable speed motor 
883 kw
1200 hp
1000rpm
600 volt
1575 a
with dc motor control cabinet but no operating controls
max speed 300rpm
capacity up to 5ton/hour
complete and in good condition
overall dims: 7m long x 2m wide x 1.6m high 
 POMINI-FARRELL NO.9 PCM230 CONTINUOUS MIXER (FARREL FCM NO.9) MACHINE NUMBER 5 YEAR 1993 NET MIXING VOLUME 30.8 LITRES MAX. TORQUE 2864 KGM STANDARD DRIVE GEARBOX TYPE SP630 NO. 40012 HP RATING 1200 YEAR OF MANUF: 1993 100/300 RPM DC VARIABLE SPEED MOTOR 883 KW 1200 HP 1000RPM 600 VOLT 1575 A WITH DC MOTOR CONTROL CABINET BUT NO OPERATING CONTROLS MAX SPEED 300RPM CAPACITY UP TO 5TON/HOUR COMPLETE AND IN GOOD CONDITION OVERALL DIMS: 7M LONG X 2M WIDE X 1.6M HIGH
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-strip width: 740 mm, thickness: entry: 1.8 mm, exit: 0.25 mm, coil weight: 5.5 t, 195 m/min. STRIP WIDTH: 740 MM, THICKNESS: ENTRY: 1.8 MM, EXIT: 0.25 MM, COIL WEIGHT: 5.5 T, 195 M/MIN.
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-strip width: 770 mm, thickness: entry: 7.6 mm, exit: 0.5 mm, coil weight: 6 ton STRIP WIDTH: 770 MM, THICKNESS: ENTRY: 7.6 MM, EXIT: 0.5 MM, COIL WEIGHT: 6 TON
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-billet dia.: 178 mm, billet furnace - gas heated, billet brusher, new plc & hydraulic systems - siemens & rexroth, stretcher 15 ton, etc. BILLET DIA.: 178 MM, BILLET FURNACE - GAS HEATED, BILLET BRUSHER, NEW PLC & HYDRAULIC SYSTEMS - SIEMENS & REXROTH, STRETCHER 15 TON, ETC.
Vendedor: MET-TECH GMBH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FARREL types: