216 ofertas

Año de construcción: usado
Ubicación: Land-gildemeister mehrspindeldrehautomat
6- spindler
typ as 48-6

abgreifeinrichtung
rückwertige bearbeitung
spaenefoerderer
iemca pra lademagazin

oelnebelabscheider GILDEMEISTER MEHRSPINDELDREHAUTOMAT 6- SPINDLER TYP AS 48-6 ABGREIFEINRICHTUNG RüCKWERTIGE BEARBEITUNG SPAENEFOERDERER IEMCA PRA LADEMAGAZIN OELNEBELABSCHEIDER
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 950 x 420 x 1950 mm<br/>description: contents: spare parts for high-frequency hand machines, mainly fein WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 420 X 1950 MM
DESCRIPTION: CONTENTS: SPARE PARTS FOR HIGH-FREQUENCY HAND MACHINES, MAINLY FEIN
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.700 €
Ubicación: Land-continuous drehzahlregelungnot schlagtasterhand turn switch for law linkslaufunterspannungsausloesertischhoehenverstellung on zahnstangebohrtiefenanschlag with feineinstellunganschlusskabel (1.5 m) with cee-steckerbohrschutz with electr. absicherungthermischer duration of overload protection/normalbohrleistung25/30 mmgewindeschneidleistung m20spindelmk iiibohrtiefe125 mmausladung280 mmsaeulendurchmesser110 mmnutzbare table area (b x l) (gradient-dependent) maximum 420 x 340 mmt-nutengroesseanzahl 2 , distance 125 mmabmessung breite13/26drehzahlanzeigeskalabohrtiefenanzeigeskalabohrtiefenanschlagmit feineinstellungtischhoehenverstellungmit zahnstangemotor three-phase 400 v polumschaltbar0, 90/1.45 kwspindeldrehzahlen with transmission, stepless 125-4000 1 /. minspindeldrehzahlen with stub shaft, 2 stufenstufe i 125-2000 1 / minstufe ii 250-4000 1 / less consonant gradation is made through riemenumlegungvorschub including electromagnetic kupplung0, 10/0.16/0.25 mm/umdr.spindel/tisch240-790 mmmaschinen dimensions (w x d x h) 520 x 820 x 1900 mmmaschinen dimension (with vp) (w x d x h) 637 x 1096 x 2120 mmgewicht300 kginklusive drilling package consisting: taper mandrel, chuck, vice and t - groove set. delivery: free house including verpackungnicht the right machine? we do also other afloat products - ask for a quote! * flott base partner *.  CONTINUOUS DREHZAHLREGELUNGNOT SCHLAGTASTERHAND TURN SWITCH FOR LAW LINKSLAUFUNTERSPANNUNGSAUSLOESERTISCHHOEHENVERSTELLUNG ON ZAHNSTANGEBOHRTIEFENANSCHLAG WITH FEINEINSTELLUNGANSCHLUSSKABEL (1.5 M) WITH CEE-STECKERBOHRSCHUTZ WITH ELECTR. ABSICHERUNGTHERMISCHER DURATION OF OVERLOAD PROTECTION/NORMALBOHRLEISTUNG25/30 MMGEWINDESCHNEIDLEISTUNG M20SPINDELMK IIIBOHRTIEFE125 MMAUSLADUNG280 MMSAEULENDURCHMESSER110 MMNUTZBARE TABLE AREA (B X L) (GRADIENT-DEPENDENT) MAXIMUM 420 X 340 MMT-NUTENGROESSEANZAHL 2 , DISTANCE 125 MMABMESSUNG BREITE13/26DREHZAHLANZEIGESKALABOHRTIEFENANZEIGESKALABOHRTIEFENANSCHLAGMIT FEINEINSTELLUNGTISCHHOEHENVERSTELLUNGMIT ZAHNSTANGEMOTOR THREE-PHASE 400 V POLUMSCHALTBAR0, 90/1.45 KWSPINDELDREHZAHLEN WITH TRANSMISSION, STEPLESS 125-4000 1 /. MINSPINDELDREHZAHLEN WITH STUB SHAFT, 2 STUFENSTUFE I 125-2000 1 / MINSTUFE II 250-4000 1 / LESS CONSONANT GRADATION IS MADE THROUGH RIEMENUMLEGUNGVORSCHUB INCLUDING ELECTROMAGNETIC KUPPLUNG0, 10/0.16/0.25 MM/UMDR.SPINDEL/TISCH240-790 MMMASCHINEN DIMENSIONS (W X D X H) 520 X 820 X 1900 MMMASCHINEN DIMENSION (WITH VP) (W X D X H) 637 X 1096 X 2120 MMGEWICHT300 KGINKLUSIVE DRILLING PACKAGE CONSISTING: TAPER MANDREL, CHUCK, VICE AND T - GROOVE SET. DELIVERY: FREE HOUSE INCLUDING VERPACKUNGNICHT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! * FLOTT BASE PARTNER *.
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 750 x 350 x 350 mm<br/>description: 1 x angle grinder bosch, 2 x straight grinders fein WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 350 X 350 MM
DESCRIPTION: 1 X ANGLE GRINDER BOSCH, 2 X STRAIGHT GRINDERS FEIN
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 9.250 €
Ubicación: Land-stephan mc10 microcut, emulsifyers, colloid mill, koialmã¼hle, inotec

machine in a state
voltage: 400v
performance: 7500w
speed: 2900 rpm
neat and quiet running
machine must be cleaned thoroughly before use.

video about test run and more pictures available STEPHAN MC10 MICROCUT, EMULSIFYERS, COLLOID MILL, KOIALM&ATILDE;&FRAC14;HLE, INOTEC MACHINE IN A STATE VOLTAGE: 400V PERFORMANCE: 7500W SPEED: 2900 RPM NEAT AND QUIET RUNNING MACHINE MUST BE CLEANED THOROUGHLY BEFORE USE. VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 750x350x350 mm<br/>description: 1 x msfo 870-1 c, yom 2016, 3700 w, 1 x straight grinder WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 750X350X350 MM
DESCRIPTION: 1 X MSFO 870-1 C, YOM 2016, 3700 W, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fully automatic angle welder /.
fully automated page welding machine
manufacturer: diez
type: aws-c 9070-cs
year of construction: 2018

operating side: in the running direction left
band-width: 600 mm
clearance height: approx. 190 mm
welding length: approx. 900 mm
working height / belt height a-spout: approx. 860 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 230v ac, 50 hz, 1 ph + n + pe
power consumption: 3,5 kw
nominal current: 10 a
with cable and 16a schuko plug
compressed air supply: 6 bar

external dimensions:
length: 2600 mm
width: 2000 mm
height: 1500 mm

description:
this packaging machine automatically packaged products of all kinds in foil. it is with this automatically to wrap fully automatic angle welding to be quite small and large products.

the welding stamp guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube slide (feinschrumpf - or pe shrink film). the product length is automatically detected via sensors.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
duration-heated sealing system with low maintenance teflon coating
needle perforation can be switched on if necessary
quick switch to simple us between different products
photo cell vertically and horizontally
pneumatic welding frame lock
very low-noise operation
painting ral 5012
machine new (vorfã¼hrmaschine)
 FULLY AUTOMATIC ANGLE WELDER /. FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: AWS-C 9070-CS YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: 600 MM CLEARANCE HEIGHT: APPROX. 190 MM WELDING LENGTH: APPROX. 900 MM WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 860 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 230V AC, 50 HZ, 1 PH + N + PE POWER CONSUMPTION: 3,5 KW NOMINAL CURRENT: 10 A WITH CABLE AND 16A SCHUKO PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 2600 MM WIDTH: 2000 MM HEIGHT: 1500 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. IT IS WITH THIS AUTOMATICALLY TO WRAP FULLY AUTOMATIC ANGLE WELDING TO BE QUITE SMALL AND LARGE PRODUCTS. THE WELDING STAMP GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE SLIDE (FEINSCHRUMPF - OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT DURATION-HEATED SEALING SYSTEM WITH LOW MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY QUICK SWITCH TO SIMPLE US BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY PNEUMATIC WELDING FRAME LOCK VERY LOW-NOISE OPERATION PAINTING RAL 5012 MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 750x350x350 mm<br/>description: 1 x msfo 870-1 c, yom 2016, 3700 w, 1 x straight grinder WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 750X350X350 MM
DESCRIPTION: 1 X MSFO 870-1 C, YOM 2016, 3700 W, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fully automatic angle welder /.
fully automated page welding machine
type: aws 6560
year of construction: 2018

operating side: in the running direction left
band-width: 500 mm
clearance height: approx 120 mm
welding length: 640 mm
working height / belt height a-spout: approx. 800 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 230v ac, 50 hz, 1 ph + n + pe
power: 3 kw
nominal current: 14 a
with cable and 16a schuko plug
compressed air supply: 6 bar

external dimensions:
length: 1960 mm
width: 1300 mm
height: 1460 mm

description:
this packaging machine automatically packaged products of all kinds in foil. it is with this automatically to wrap fully automatic angle welding to be quite small and large products.

the welding stamp guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube slide (feinschrumpf - or pe shrink film). the product length is automatically detected via sensors.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
duration-heated sealing system with low maintenance teflon coating
needle perforation can be switched on if necessary
quick switch to simple us between different products
photo cell vertically and horizontally
pneumatic welding frame lock
very low-noise operation
painting ral 5012
machine new (vorfã¼hrmaschine) FULLY AUTOMATIC ANGLE WELDER /. FULLY AUTOMATED PAGE WELDING MACHINE TYPE: AWS 6560 YEAR OF CONSTRUCTION: 2018 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: 500 MM CLEARANCE HEIGHT: APPROX 120 MM WELDING LENGTH: 640 MM WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 800 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 230V AC, 50 HZ, 1 PH + N + PE POWER: 3 KW NOMINAL CURRENT: 14 A WITH CABLE AND 16A SCHUKO PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 1960 MM WIDTH: 1300 MM HEIGHT: 1460 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. IT IS WITH THIS AUTOMATICALLY TO WRAP FULLY AUTOMATIC ANGLE WELDING TO BE QUITE SMALL AND LARGE PRODUCTS. THE WELDING STAMP GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE SLIDE (FEINSCHRUMPF - OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT DURATION-HEATED SEALING SYSTEM WITH LOW MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY QUICK SWITCH TO SIMPLE US BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY PNEUMATIC WELDING FRAME LOCK VERY LOW-NOISE OPERATION PAINTING RAL 5012 MACHINE NEW (VORF&ATILDE;&FRAC14;HRMASCHINE)
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 15 €
Ubicación: Land-weight approx.: 140 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 300 mm<br/>description: 1 x hfw 9-125, yom 2018, 900 w, 2 x straight grinders WEIGHT APPROX.: 140 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 300 MM
DESCRIPTION: 1 X HFW 9-125, YOM 2018, 900 W, 2 X STRAIGHT GRINDERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fully automatic angle welder /.
fully automated page welding machine
manufacturer: diez
type: aws-c 9070-cs
year of constr.: 2017

operating side: in the running direction left
band-width: 600 mm
clearance height: approx. 190 mm
welding length: approx. 900 mm
working height / belt height a-spout: approx. 860 mm + 100
capacity: up to 30 cycles / min (depending on the package size and feed speed)
supply voltage: 230v ac, 50 hz, 1 ph + n + pe
power consumption: 3,5 kw
nominal current: 10 a
with cable and 16a schuko plug
compressed air supply: 6 bar

external dimensions:
length: 2600 mm
width: 2000 mm
height: 1500 mm

description:
this packaging machine automatically packaged products of all kinds in foil. it is with this automatically to wrap fully automatic angle welding to be quite small and large products.

the welding stamp guarantees extremely stable side seams for all slides. the processing of the film via the 3-sided welding of a half tube slide (feinschrumpf - or pe shrink film). the product length is automatically detected via sensors.
ideal for packaging for car mats, textiles.

high operating and service friendliness
very robust and long-lasting mechanical engineering
for fine polyolefin shrink films and ldpe films without convert
duration-heated sealing system with low-maintenance teflon coating
needle perforation can be switched on if necessary
simple fast switching between different products
photo cell vertically and horizontally
pneumatic welding frame lock
very low-noise operation
painting ral 5012
 FULLY AUTOMATIC ANGLE WELDER /. FULLY AUTOMATED PAGE WELDING MACHINE MANUFACTURER: DIEZ TYPE: AWS-C 9070-CS YEAR OF CONSTR.: 2017 OPERATING SIDE: IN THE RUNNING DIRECTION LEFT BAND-WIDTH: 600 MM CLEARANCE HEIGHT: APPROX. 190 MM WELDING LENGTH: APPROX. 900 MM WORKING HEIGHT / BELT HEIGHT A-SPOUT: APPROX. 860 MM + 100 CAPACITY: UP TO 30 CYCLES / MIN (DEPENDING ON THE PACKAGE SIZE AND FEED SPEED) SUPPLY VOLTAGE: 230V AC, 50 HZ, 1 PH + N + PE POWER CONSUMPTION: 3,5 KW NOMINAL CURRENT: 10 A WITH CABLE AND 16A SCHUKO PLUG COMPRESSED AIR SUPPLY: 6 BAR EXTERNAL DIMENSIONS: LENGTH: 2600 MM WIDTH: 2000 MM HEIGHT: 1500 MM DESCRIPTION: THIS PACKAGING MACHINE AUTOMATICALLY PACKAGED PRODUCTS OF ALL KINDS IN FOIL. IT IS WITH THIS AUTOMATICALLY TO WRAP FULLY AUTOMATIC ANGLE WELDING TO BE QUITE SMALL AND LARGE PRODUCTS. THE WELDING STAMP GUARANTEES EXTREMELY STABLE SIDE SEAMS FOR ALL SLIDES. THE PROCESSING OF THE FILM VIA THE 3-SIDED WELDING OF A HALF TUBE SLIDE (FEINSCHRUMPF - OR PE SHRINK FILM). THE PRODUCT LENGTH IS AUTOMATICALLY DETECTED VIA SENSORS. IDEAL FOR PACKAGING FOR CAR MATS, TEXTILES. HIGH OPERATING AND SERVICE FRIENDLINESS VERY ROBUST AND LONG-LASTING MECHANICAL ENGINEERING FOR FINE POLYOLEFIN SHRINK FILMS AND LDPE FILMS WITHOUT CONVERT DURATION-HEATED SEALING SYSTEM WITH LOW-MAINTENANCE TEFLON COATING NEEDLE PERFORATION CAN BE SWITCHED ON IF NECESSARY SIMPLE FAST SWITCHING BETWEEN DIFFERENT PRODUCTS PHOTO CELL VERTICALLY AND HORIZONTALLY PNEUMATIC WELDING FRAME LOCK VERY LOW-NOISE OPERATION PAINTING RAL 5012
Vendedor: METEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 750x350x350 mm<br/>description: 1 x angle grinder msfo 870-1 c, yom 2016, 3700 w WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 750X350X350 MM
DESCRIPTION: 1 X ANGLE GRINDER MSFO 870-1 C, YOM 2016, 3700 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.750 €
Ubicación: Land-stephan mc10/2 microcut, emulsifyers, colloid mill, koialmã¼hle, inotec

voltage: 400v
protection: 20a
power: 5500/7500w
speed: 1450/2900/min
with circulation system and 90 litres hopper
equipped with 0, 9 mm cutting ring
machine comes from the kitchen of a hotel and was only very rarely in use when the new chef in the last 5 years
you is in very good condition, still should be cleaned thoroughly before use

video about test run and more pictures available STEPHAN MC10/2 MICROCUT, EMULSIFYERS, COLLOID MILL, KOIALM&ATILDE;&FRAC14;HLE, INOTEC VOLTAGE: 400V PROTECTION: 20A POWER: 5500/7500W SPEED: 1450/2900/MIN WITH CIRCULATION SYSTEM AND 90 LITRES HOPPER EQUIPPED WITH 0, 9 MM CUTTING RING MACHINE COMES FROM THE KITCHEN OF A HOTEL AND WAS ONLY VERY RARELY IN USE WHEN THE NEW CHEF IN THE LAST 5 YEARS YOU IS IN VERY GOOD CONDITION, STILL SHOULD BE CLEANED THOROUGHLY BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 750x350x350 mm<br/>description: 3700 w WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 750X350X350 MM
DESCRIPTION: 3700 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 500 €
Ubicación: Land-boom drill
the boom length ca 1300mm

changes and errors in the technical data and information and subject to prior sale!    

 BOOM DRILL THE BOOM LENGTH CA 1300MM CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 300 mm<br/>description: 1 x msf 842-2 c, 700 w, 2 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 300 MM
DESCRIPTION: 1 X MSF 842-2 C, 700 W, 2 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 5.500 €
Ubicación: Land-inotec / colloid mill / emulsifer

nagema

technical data:

type: km 3.1
    11.25 kw, 380 v / 35 a / 50 hz
    throughput approx.: 1200 kg / h
    hopper: stainless steel
    machine body: stainless steel
    dimensions: h129 x b61 x t60 cm
    diameter funnel: 50 cm
    function checked

see pictures original condition and accessories!

if you have questions, email or call. INOTEC / COLLOID MILL / EMULSIFER NAGEMA TECHNICAL DATA: TYPE: KM 3.1 11.25 KW, 380 V / 35 A / 50 HZ THROUGHPUT APPROX.: 1200 KG / H HOPPER: STAINLESS STEEL MACHINE BODY: STAINLESS STEEL DIMENSIONS: H129 X B61 X T60 CM DIAMETER FUNNEL: 50 CM FUNCTION CHECKED SEE PICTURES ORIGINAL CONDITION AND ACCESSORIES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 300 mm<br/>description: 1 x msf 842-2 c, 700 w, 1 x msf 842-2 c, 700 w, yom 2008, 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 300 MM
DESCRIPTION: 1 X MSF 842-2 C, 700 W, 1 X MSF 842-2 C, 700 W, YOM 2008, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-feinblech-leveler, used, fine sheet leveler, used, type / type: ubrx 3 x 1600
manufacturer / make: wmw gotha
year / year: 1974 / / / 2001 / / / 2003 overhauled electrical / control / electric and control 
                                                                                                                      refurbished maximum sheet width / max sheet width: 1600 mm
bale length: 1668 mm
maximum sheet thickness / max sheet thickness: 3 mm (yield strength 280 n/mm ^ 2 / / st 42)
                                                                     2.5 mm (yield strength 360 n/mm ^ 2 / / st 37)
                                                                     3.25 mm (yield strength 280 n/mm ^ 2 / / st 34)
min. sheet thickness / min. sheet thickness: 0.8 mm
number of the straightening rollers /.
    number of straightining rollers: 21 rolls / rollers
â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â â      â â  10 top / above / / 11 down/below
roll diameter / diameter of rollers: 63 mm diameter of the support roller / diam.support roller: 123 mm
stroke of the beam / way of traverse: 3 mm up / to + 20 mm
pan travel: 2.5 mm
pressure movement: stroke:-06 mm
                                                                                     -1 mm
                                                                                      + 0.6 mm
                                                                                      + 1.2 mm
                                                                                      + 2 mm
recommended speed / speed of straightening: 15 m/min / / 22, 5 m/min / / 30 m / min
                                                                            45 m / min
traverse speed: 0.71 mm / sec
hubgeschw. the printing unit: 0.3 mm / sec
main drive motor power of main motor: 50 kw
â 
accessories: set of new unused set rollers /.
                                     set of new leveling rollers included

FEINBLECH-LEVELER, USED, FINE SHEET LEVELER, USED, TYPE / TYPE: UBRX 3 X 1600 MANUFACTURER / MAKE: WMW GOTHA YEAR / YEAR: 1974 / / / 2001 / / / 2003 OVERHAULED ELECTRICAL / CONTROL / ELECTRIC AND CONTROL REFURBISHED MAXIMUM SHEET WIDTH / MAX SHEET WIDTH: 1600 MM BALE LENGTH: 1668 MM MAXIMUM SHEET THICKNESS / MAX SHEET THICKNESS: 3 MM (YIELD STRENGTH 280 N/MM ^ 2 / / ST 42) 2.5 MM (YIELD STRENGTH 360 N/MM ^ 2 / / ST 37) 3.25 MM (YIELD STRENGTH 280 N/MM ^ 2 / / ST 34) MIN. SHEET THICKNESS / MIN. SHEET THICKNESS: 0.8 MM NUMBER OF THE STRAIGHTENING ROLLERS /. NUMBER OF STRAIGHTINING ROLLERS: 21 ROLLS / ROLLERS &ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP;&ACIRC;&NBSP; &ACIRC;&NBSP;&ACIRC;&NBSP; 10 TOP / ABOVE / / 11 DOWN/BELOW ROLL DIAMETER / DIAMETER OF ROLLERS: 63 MM DIAMETER OF THE SUPPORT ROLLER / DIAM.SUPPORT ROLLER: 123 MM STROKE OF THE BEAM / WAY OF TRAVERSE: 3 MM UP / TO + 20 MM PAN TRAVEL: 2.5 MM PRESSURE MOVEMENT: STROKE:-06 MM -1 MM + 0.6 MM + 1.2 MM + 2 MM RECOMMENDED SPEED / SPEED OF STRAIGHTENING: 15 M/MIN / / 22, 5 M/MIN / / 30 M / MIN 45 M / MIN TRAVERSE SPEED: 0.71 MM / SEC HUBGESCHW. THE PRINTING UNIT: 0.3 MM / SEC MAIN DRIVE MOTOR POWER OF MAIN MOTOR: 50 KW &ACIRC;&NBSP; ACCESSORIES: SET OF NEW UNUSED SET ROLLERS /. SET OF NEW LEVELING ROLLERS INCLUDED
Vendedor: ZOMA Maschinenhandel
Año de construcción: usado
Precio: used machinery auction RESALE 140 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 300 mm<br/>description: 2 x angle grinders fein msi 842-2 c/diameter125 mm/7100/min, 700 w, 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 300 MM
DESCRIPTION: 2 X ANGLE GRINDERS FEIN MSI 842-2 C/DIAMETER125 MM/7100/MIN, 700 W, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 700 €
Ubicación: Land-trading and manufacturing company bgi polska sp. z o.o., based  in lesna (poland, lowersilesia near to jelenia gora) is offering you for sale:

drill low speed with magnetic holder. 
both devices. 
the production of the renowned german company stein.
the status of the device. complete device.
detailed data that appears in the photos-nameplates.
price gross - 700 euro

we would like to invite you to participate in our auctions, please click abc://bgipolska.comarch-esklep.pl/
in case of any questions, do not hesitate to contact us.

sales department:
tomasz  (english)  - tel. +48 500 393 610, email: tomasz.klimczak@bgipolska.pl
rafal   (english/german) - tel. +48 500 393 620, email: rafal.ilis@bgipolska.pl
kornel  (polish) -  tel. +48 500 393 616, email: kornel.potocki@bgipolska.pl
 TRADING AND MANUFACTURING COMPANY BGI POLSKA SP. Z O.O., BASED IN LESNA (POLAND, LOWERSILESIA NEAR TO JELENIA GORA) IS OFFERING YOU FOR SALE: DRILL LOW SPEED WITH MAGNETIC HOLDER. BOTH DEVICES. THE PRODUCTION OF THE RENOWNED GERMAN COMPANY STEIN. THE STATUS OF THE DEVICE. COMPLETE DEVICE. DETAILED DATA THAT APPEARS IN THE PHOTOS-NAMEPLATES. PRICE GROSS - 700 EURO WE WOULD LIKE TO INVITE YOU TO PARTICIPATE IN OUR AUCTIONS, PLEASE CLICK ABC://BGIPOLSKA.COMARCH-ESKLEP.PL/ IN CASE OF ANY QUESTIONS, DO NOT HESITATE TO CONTACT US. SALES DEPARTMENT: TOMASZ (ENGLISH) - TEL. +48 500 393 610, EMAIL: TOMASZ.KLIMCZAK@BGIPOLSKA.PL RAFAL (ENGLISH/GERMAN) - TEL. +48 500 393 620, EMAIL: RAFAL.ILIS@BGIPOLSKA.PL KORNEL (POLISH) - TEL. +48 500 393 616, EMAIL: KORNEL.POTOCKI@BGIPOLSKA.PL
Vendedor: BGI Polska sp. z o.o.
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 350 mm<br/>description: 1 x msfo 849-1 c, 1350 w, yom 2008, 1 x fhfw 9-125, 900 w, yom 2018, 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 350 MM
DESCRIPTION: 1 X MSFO 849-1 C, 1350 W, YOM 2008, 1 X FHFW 9-125, 900 W, YOM 2018, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we sell an aluminium saw for cutting of thin-walled circular tubes up to approx. 40 mm. dpi9ou7es can be cut several tubes at the same time. the total width of the cut where the material is put together amounts to 290 mm.die machine jams the profiles with air pressure together, so that they can be cut at once. the feed is also about druckluft.es is a machine for many consistent zuschnitte.die machine has an automatic feinsprã¼hanlage.kann viewed at any time with us to be. no zubehã¶r.keine betriebsanleitung.die machine is a special edition that was produced only once. we can load technically impeccable zustand.maschine, without aufpreis.versandkosten by the purchaser.   WE SELL AN ALUMINIUM SAW FOR CUTTING OF THIN-WALLED CIRCULAR TUBES UP TO APPROX. 40 MM. DPI9OU7ES CAN BE CUT SEVERAL TUBES AT THE SAME TIME. THE TOTAL WIDTH OF THE CUT WHERE THE MATERIAL IS PUT TOGETHER AMOUNTS TO 290 MM.DIE MACHINE JAMS THE PROFILES WITH AIR PRESSURE TOGETHER, SO THAT THEY CAN BE CUT AT ONCE. THE FEED IS ALSO ABOUT DRUCKLUFT.ES IS A MACHINE FOR MANY CONSISTENT ZUSCHNITTE.DIE MACHINE HAS AN AUTOMATIC FEINSPR&ATILDE;&FRAC14;HANLAGE.KANN VIEWED AT ANY TIME WITH US TO BE. NO ZUBEH&ATILDE;&PARA;R.KEINE BETRIEBSANLEITUNG.DIE MACHINE IS A SPECIAL EDITION THAT WAS PRODUCED ONLY ONCE. WE CAN LOAD TECHNICALLY IMPECCABLE ZUSTAND.MASCHINE, WITHOUT AUFPREIS.VERSANDKOSTEN BY THE PURCHASER.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 350 mm<br/>description: 2 x angle grinders: 1 x msfo 869-1 d, yom 2015, 1 x hfw 9-125, yom 2016, 900 w and 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 350 MM
DESCRIPTION: 2 X ANGLE GRINDERS: 1 X MSFO 869-1 D, YOM 2015, 1 X HFW 9-125, YOM 2016, 900 W AND 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-4 rpm 3000/6000/4500/9000 rpm. right - / linkslaufspindelarretierung via fuã?bedienungfrã¤sanschlag with feineinstellungspindel diameter. 30 mmabsaugung up, down per 120 of mmspindelschlã¼sselmaulschlã¼ssel 41 mmkabel plug 16 amp.  4 RPM 3000/6000/4500/9000 RPM. RIGHT - / LINKSLAUFSPINDELARRETIERUNG VIA FU&ATILDE;?BEDIENUNGFR&ATILDE;&CURREN;SANSCHLAG WITH FEINEINSTELLUNGSPINDEL DIAMETER. 30 MMABSAUGUNG UP, DOWN PER 120 OF MMSPINDELSCHL&ATILDE;&FRAC14;SSELMAULSCHL&ATILDE;&FRAC14;SSEL 41 MMKABEL PLUG 16 AMP.
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 350 mm<br/>description: 2 x angle grinders: 1 x msf 842-2 c, yom 2007, 700 w, 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 350 MM
DESCRIPTION: 2 X ANGLE GRINDERS: 1 X MSF 842-2 C, YOM 2007, 700 W, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cutting length: 3200 mm
cutting width: 3200 mm
width of stroke: gear motor adjustment
main yoke: saw blade 㸠300, ã? 30, z, sh 70 = 60
before scoring unit: yes - saw blade ã? 125, ã? 20, z = 24
softforming-aggregate: no
page print setup: yes - execution: fr 50/100
residual cutting device: yes - cut-out pressure bar
veneer cutting device: yes
be hem cutting device: yes - distance: 145/525/1790
plate front: 400 x 1400 mm - 2 pcs.
plate rear: 240 x 2960 mm - 1 piece
edition bars rear: 40 x 2960 mm - 5 pcs.
angle table: 480 x 1400 mm left
angle ruler: with excerpt
collets: 70/400/1600/2800 distance 4 units - floating-
stop jaws: 1000/2200 distance 2 units - starr-
additional foot rear: no - 3 feet
protection screen: yes
foot switch: no
machine cuts by: left to right
aggregate can occur in every area: no
autom. cut with saws overtravel: no
3-stage cutting height adjustment: no
main saw: 7,5 kw, 2870 rpm, 380 v, 50 hz
before ritz saw: 1,1 kw, 2800 rpm, 380 v, 50 hz
width stroke linear motor with torque compensation: feingangmot.: 0.12 kw, 380 v, 1380 / min.
main motor: 0.35 kw, 380 v, 1350n. CUTTING LENGTH: 3200 MM CUTTING WIDTH: 3200 MM WIDTH OF STROKE: GEAR MOTOR ADJUSTMENT MAIN YOKE: SAW BLADE &ATILDE;&CEDIL; 300, &ATILDE;? 30, Z, SH 70 = 60 BEFORE SCORING UNIT: YES - SAW BLADE &ATILDE;? 125, &ATILDE;? 20, Z = 24 SOFTFORMING-AGGREGATE: NO PAGE PRINT SETUP: YES - EXECUTION: FR 50/100 RESIDUAL CUTTING DEVICE: YES - CUT-OUT PRESSURE BAR VENEER CUTTING DEVICE: YES BE HEM CUTTING DEVICE: YES - DISTANCE: 145/525/1790 PLATE FRONT: 400 X 1400 MM - 2 PCS. PLATE REAR: 240 X 2960 MM - 1 PIECE EDITION BARS REAR: 40 X 2960 MM - 5 PCS. ANGLE TABLE: 480 X 1400 MM LEFT ANGLE RULER: WITH EXCERPT COLLETS: 70/400/1600/2800 DISTANCE 4 UNITS - FLOATING- STOP JAWS: 1000/2200 DISTANCE 2 UNITS - STARR- ADDITIONAL FOOT REAR: NO - 3 FEET PROTECTION SCREEN: YES FOOT SWITCH: NO MACHINE CUTS BY: LEFT TO RIGHT AGGREGATE CAN OCCUR IN EVERY AREA: NO AUTOM. CUT WITH SAWS OVERTRAVEL: NO 3-STAGE CUTTING HEIGHT ADJUSTMENT: NO MAIN SAW: 7,5 KW, 2870 RPM, 380 V, 50 HZ BEFORE RITZ SAW: 1,1 KW, 2800 RPM, 380 V, 50 HZ WIDTH STROKE LINEAR MOTOR WITH TORQUE COMPENSATION: FEINGANGMOT.: 0.12 KW, 380 V, 1380 / MIN. MAIN MOTOR: 0.35 KW, 380 V, 1350N.
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 600 x 350 x 350 mm<br/>description: 2 x angle grinders: msfo 849-1 c, 1500 w, yom 2016, 1 x straight grinder WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 350 X 350 MM
DESCRIPTION: 2 X ANGLE GRINDERS: MSFO 849-1 C, 1500 W, YOM 2016, 1 X STRAIGHT GRINDER
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--11 kw
-11,000 rpm.
-pressure circulation lubrication of main bearing
-control cabinet
-stainless steel console table
-roller containers in stainless steel for grist
-vibrodosierrinne
-inlet funnel in v2a -11 KW -11,000 RPM. -PRESSURE CIRCULATION LUBRICATION OF MAIN BEARING -CONTROL CABINET -STAINLESS STEEL CONSOLE TABLE -ROLLER CONTAINERS IN STAINLESS STEEL FOR GRIST -VIBRODOSIERRINNE -INLET FUNNEL IN V2A
Vendedor: TILA GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 5 kg<br/>dimensions (l x w x h) approx.: 500 x 320 x 150 mm<br/>description: 18.0 v, battery charger, replacement battery, various bit mounting tools, plastic case WEIGHT APPROX.: 5 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 320 X 150 MM
DESCRIPTION: 18.0 V, BATTERY CHARGER, REPLACEMENT BATTERY, VARIOUS BIT MOUNTING TOOLS, PLASTIC CASE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-previero wet grinder mu510l

75 kw
loading hopper
steel rotor 1000 mm long x 550 mm. diam. water cooled
roll type outer bearings
scissor type cutting
n.3 rotor + n.2 stator steel blades 58/59 hrc
adjustable still and rotating knives
belt transmission
closed rotor with exchageable knif holding parts
electric components with ip54 protection
epossidic paint
unloading hopper
complete with electric cabinet for management
n.1 series of spare knives.
machine reconditioned PREVIERO WET GRINDER MU510L 75 KW LOADING HOPPER STEEL ROTOR 1000 MM LONG X 550 MM. DIAM. WATER COOLED ROLL TYPE OUTER BEARINGS SCISSOR TYPE CUTTING N.3 ROTOR + N.2 STATOR STEEL BLADES 58/59 HRC ADJUSTABLE STILL AND ROTATING KNIVES BELT TRANSMISSION CLOSED ROTOR WITH EXCHAGEABLE KNIF HOLDING PARTS ELECTRIC COMPONENTS WITH IP54 PROTECTION EPOSSIDIC PAINT UNLOADING HOPPER COMPLETE WITH ELECTRIC CABINET FOR MANAGEMENT N.1 SERIES OF SPARE KNIVES. MACHINE RECONDITIONED
Vendedor: GERMANPLAST SRL
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 600 x 300 x 300 mm<br/>description: angle grinder fein wsb 20-180, 2000 w, yom 2005, impact drill aeg be 705 r WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 300 X 300 MM
DESCRIPTION: ANGLE GRINDER FEIN WSB 20-180, 2000 W, YOM 2005, IMPACT DRILL AEG BE 705 R
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.078 €
Ubicación: Land-alexanderwerk colloid mill inotec je1-fn

emulsifyers with stainless steel housing
power: 11kw
voltage: 380v
machine runs smoothly and quietly
star - delta connection of rotary switches
detachable funnel
cutting premises in proper condition
cutting gap can be adjusted via hopper continuously, thus individual refinement of the product can be reached
machine has the usual signs of use and is in the state as of the customers back, she is therefore to clean thoroughly prior to use.

video about test run and more pictures available ALEXANDERWERK COLLOID MILL INOTEC JE1-FN EMULSIFYERS WITH STAINLESS STEEL HOUSING POWER: 11KW VOLTAGE: 380V MACHINE RUNS SMOOTHLY AND QUIETLY STAR - DELTA CONNECTION OF ROTARY SWITCHES DETACHABLE FUNNEL CUTTING PREMISES IN PROPER CONDITION CUTTING GAP CAN BE ADJUSTED VIA HOPPER CONTINUOUSLY, THUS INDIVIDUAL REFINEMENT OF THE PRODUCT CAN BE REACHED MACHINE HAS THE USUAL SIGNS OF USE AND IS IN THE STATE AS OF THE CUSTOMERS BACK, SHE IS THEREFORE TO CLEAN THOROUGHLY PRIOR TO USE. VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 35 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 350 mm<br/>description: angle grinder fein wsg 8-125, 800 w, yom 2014, 2 impact drills metabo we 560 and riobi dy 5 rs, 750 w WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 350 MM
DESCRIPTION: ANGLE GRINDER FEIN WSG 8-125, 800 W, YOM 2014, 2 IMPACT DRILLS METABO WE 560 AND RIOBI DY 5 RS, 750 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.460 €
Ubicación: Land-hf feinfrã¤ã? &amp; - grinding spindle, manufacturer fischer schaffhausen.
designation; mfvs 830,
series number: el-s-007
the spindle is undamaged, unused and in their original packaging.

the spindle can be used with electrodes and-precision strausak type. 82 cnc.
or as rf - internal grinding spindle.

tech. data.: 220 v
                    600 hz
                    4-pin
                    2.5 kva
                    1.4 kw / 600 hz for further information:
the grinding technology: tool &amp;-profile grinding coarser has in 2001 of the production &amp; - strausak license rights wage purchased. the rights include the complete series 57 u/w, 57 u cnc, 57 w cnc 3.-4.u-5-axis, and from this all developed machines.  HF FEINFR&ATILDE;&CURREN;&ATILDE;? &AMP; - GRINDING SPINDLE, MANUFACTURER FISCHER SCHAFFHAUSEN. DESIGNATION; MFVS 830, SERIES NUMBER: EL-S-007 THE SPINDLE IS UNDAMAGED, UNUSED AND IN THEIR ORIGINAL PACKAGING. THE SPINDLE CAN BE USED WITH ELECTRODES AND-PRECISION STRAUSAK TYPE. 82 CNC. OR AS RF - INTERNAL GRINDING SPINDLE. TECH. DATA.: 220 V 600 HZ 4-PIN 2.5 KVA 1.4 KW / 600 HZ FOR FURTHER INFORMATION: THE GRINDING TECHNOLOGY: TOOL &AMP;-PROFILE GRINDING COARSER HAS IN 2001 OF THE PRODUCTION &AMP; - STRAUSAK LICENSE RIGHTS WAGE PURCHASED. THE RIGHTS INCLUDE THE COMPLETE SERIES 57 U/W, 57 U CNC, 57 W CNC 3.-4.U-5-AXIS, AND FROM THIS ALL DEVELOPED MACHINES.
Vendedor: Dr. Max Theisen Werkzeugmaschinenvertrieb
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 300 x 250 mm<br/>description: aske 636, 320 w, 1,5 a, asse 636, 230w yom 2014 WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 250 MM
DESCRIPTION: ASKE 636, 320 W, 1,5 A, ASSE 636, 230W YOM 2014
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1. driveway gate, (total width: 5,000 mm), double sashed, clearance: approx. 4,700 mm x height: 1,500 mm, material: rectangular tubes and bars in square tube, the frame has hinge 90 â° (in sufficient static version), 2 posts, square tube, length: approx. 2,200 mm (to the concrete), including, tubular frame lock, prepared for profile cylinder with floor beams and ground sleeve.

surface: hot-dip galvanized, item location: ex works, self assembly.

price: on request!

freight cost: on request!

other dimensions, coatings and mounting types on request. 

delivery time: approx. 6-10 weeks (depending on the season)!   1. DRIVEWAY GATE, (TOTAL WIDTH: 5,000 MM), DOUBLE SASHED, CLEARANCE: APPROX. 4,700 MM X HEIGHT: 1,500 MM, MATERIAL: RECTANGULAR TUBES AND BARS IN SQUARE TUBE, THE FRAME HAS HINGE 90 &ACIRC;&DEG; (IN SUFFICIENT STATIC VERSION), 2 POSTS, SQUARE TUBE, LENGTH: APPROX. 2,200 MM (TO THE CONCRETE), INCLUDING, TUBULAR FRAME LOCK, PREPARED FOR PROFILE CYLINDER WITH FLOOR BEAMS AND GROUND SLEEVE. SURFACE: HOT-DIP GALVANIZED, ITEM LOCATION: EX WORKS, SELF ASSEMBLY. PRICE: ON REQUEST! FREIGHT COST: ON REQUEST! OTHER DIMENSIONS, COATINGS AND MOUNTING TYPES ON REQUEST. DELIVERY TIME: APPROX. 6-10 WEEKS (DEPENDING ON THE SEASON)!
Vendedor: Vertriebsbüro Süd
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 400 x 400 x 400 mm<br/>description: hand grinder bosch, jigsaw makita, orbital sander bosch gex 125 ac, corner grinder fein, hot air blower bosch phg 530-2 WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 400 X 400 MM
DESCRIPTION: HAND GRINDER BOSCH, JIGSAW MAKITA, ORBITAL SANDER BOSCH GEX 125 AC, CORNER GRINDER FEIN, HOT AIR BLOWER BOSCH PHG 530-2
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 courtyard entrance / gate, new, manually drive can be manually push, there is a need but a certain force adult (total length: 9,500 mm), single / self-supporting, clear opening width: 7.000 mm x height: 1,950 mm, material: frame rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,950 mm, incl. mounting material and foundation plan, gate is on closing direction / driveway right bolted to the foundation, or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly.

price: on request!

freight cost: on request!

other dimensions, coatings and mounting types on request. 

delivery time: approx. 6-10 weeks (depending on the season)!     1 COURTYARD ENTRANCE / GATE, NEW, MANUALLY DRIVE CAN BE MANUALLY PUSH, THERE IS A NEED BUT A CERTAIN FORCE ADULT (TOTAL LENGTH: 9,500 MM), SINGLE / SELF-SUPPORTING, CLEAR OPENING WIDTH: 7.000 MM X HEIGHT: 1,950 MM, MATERIAL: FRAME RECTANGLE TUBE AND LATTICE MATS FILLING IN STATIC ADEQUATE DIMENSIONING, 1 POST WITH BASE PLATE AND 4 HOLES, HEIGHT: 1,950 MM, INCL. MOUNTING MATERIAL AND FOUNDATION PLAN, GATE IS ON CLOSING DIRECTION / DRIVEWAY RIGHT BOLTED TO THE FOUNDATION, OR LEFT (SEEN FROM OUTSIDE), SURFACE: HOT-DIP GALVANIZED, ITEM LOCATION: EX WORKS, SELF ASSEMBLY. PRICE: ON REQUEST! FREIGHT COST: ON REQUEST! OTHER DIMENSIONS, COATINGS AND MOUNTING TYPES ON REQUEST. DELIVERY TIME: APPROX. 6-10 WEEKS (DEPENDING ON THE SEASON)!
Vendedor: Vertriebsbüro Süd
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 400 x 300 x 250 mm<br/>description: angle grinder fein wss 12-125, 1200 w, diameter 125 mm, impact drill askeu 636 kinetik, 300 w WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 250 MM
DESCRIPTION: ANGLE GRINDER FEIN WSS 12-125, 1200 W, DIAMETER 125 MM, IMPACT DRILL ASKEU 636 KINETIK, 300 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-m
type of machine control and lathe make schaublin type 102 vm built 1970 control type conventional storage france country of origin switzerland delivery immediately cargo base stock haguenau france technical details

turning diameter over bed 305 mm turning diameter over support 150 mm turning length 450 mm centre height over bed 102 mm top width 450 mm spindle bore 20 mm speed range 3000 rpm power - spindle motor 1,5 kw taper in the tailstock quill mk 2 quill diameter 36 mm quill stroke 60 mm operating voltage 380 v total power 3 kw machine weight approx. 650 kg space requirement approx. 1760 x 600 1230 m additional information

super condition
 multi fix holder feed dia 100 mm
 chip pliers system
 uberholt 1997 duch scemama
 tip height 102 mm
 top width 450 mm
 leit.-/ spindle
 collets w20 available
 rotational speed: approx. 210 3000 rpm
 reduction gear

links.-right rotation
 2-stage drive
 l x w x h: ca. 1760 x 595 x 1230 mm
 weight: approx. 650 kg M TYPE OF MACHINE CONTROL AND LATHE MAKE SCHAUBLIN TYPE 102 VM BUILT 1970 CONTROL TYPE CONVENTIONAL STORAGE FRANCE COUNTRY OF ORIGIN SWITZERLAND DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS TURNING DIAMETER OVER BED 305 MM TURNING DIAMETER OVER SUPPORT 150 MM TURNING LENGTH 450 MM CENTRE HEIGHT OVER BED 102 MM TOP WIDTH 450 MM SPINDLE BORE 20 MM SPEED RANGE 3000 RPM POWER - SPINDLE MOTOR 1,5 KW TAPER IN THE TAILSTOCK QUILL MK 2 QUILL DIAMETER 36 MM QUILL STROKE 60 MM OPERATING VOLTAGE 380 V TOTAL POWER 3 KW MACHINE WEIGHT APPROX. 650 KG SPACE REQUIREMENT APPROX. 1760 X 600 1230 M ADDITIONAL INFORMATION SUPER CONDITION MULTI FIX HOLDER FEED DIA 100 MM CHIP PLIERS SYSTEM UBERHOLT 1997 DUCH SCEMAMA TIP HEIGHT 102 MM TOP WIDTH 450 MM LEIT.-/ SPINDLE COLLETS W20 AVAILABLE ROTATIONAL SPEED: APPROX. 210 3000 RPM REDUCTION GEAR LINKS.-RIGHT ROTATION 2-STAGE DRIVE L X W X H: CA. 1760 X 595 X 1230 MM WEIGHT: APPROX. 650 KG
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Precio: used machinery auction RESALE 55 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 300 x 300 x 250 mm<br/>description: 230 w WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 250 MM
DESCRIPTION: 230 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 24.500 €
Ubicación: Land-packaging line: system used for setting up, fixing and sealing of cartons - pac 600 - -:
 
pac 600â® is a complete solution for fully automatic erecting, fixing and sealing of cartons and ensures a safe transport packaging
 
price for the whole line (consists of 3 machines): â?¬24.500.-(net) to self-destruction.
 
packing machine, carton erector, savoye - used -:
 
manufacturer: savoye
type: 60-12
year of construction: 2000
machine weight: approx. 5, 4to
condition: good
 (internal: above)
 
 
packaging machine folienschrumpfeinheit, savoye - used -:
 
manufacturer: savoye
type: 50-27
year of construction: 2000
machine weight: ca. 1.45 tons
condition: good
 (internal: below)
 
 
case sealers, savoye, packaging machine - second-hand -:
 
manufacturer: savoye
type: 95-64-2f
year of construction: 2000
machine weight: ca. 1.6 tons
400v
condition: good
 (internal: below) PACKAGING LINE: SYSTEM USED FOR SETTING UP, FIXING AND SEALING OF CARTONS - PAC 600 - -: PAC 600&ACIRC;® IS A COMPLETE SOLUTION FOR FULLY AUTOMATIC ERECTING, FIXING AND SEALING OF CARTONS AND ENSURES A SAFE TRANSPORT PACKAGING PRICE FOR THE WHOLE LINE (CONSISTS OF 3 MACHINES): &ACIRC;?&NOT;24.500.-(NET) TO SELF-DESTRUCTION. PACKING MACHINE, CARTON ERECTOR, SAVOYE - USED -: MANUFACTURER: SAVOYE TYPE: 60-12 YEAR OF CONSTRUCTION: 2000 MACHINE WEIGHT: APPROX. 5, 4TO CONDITION: GOOD (INTERNAL: ABOVE) PACKAGING MACHINE FOLIENSCHRUMPFEINHEIT, SAVOYE - USED -: MANUFACTURER: SAVOYE TYPE: 50-27 YEAR OF CONSTRUCTION: 2000 MACHINE WEIGHT: CA. 1.45 TONS CONDITION: GOOD (INTERNAL: BELOW) CASE SEALERS, SAVOYE, PACKAGING MACHINE - SECOND-HAND -: MANUFACTURER: SAVOYE TYPE: 95-64-2F YEAR OF CONSTRUCTION: 2000 MACHINE WEIGHT: CA. 1.6 TONS 400V CONDITION: GOOD (INTERNAL: BELOW)
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 750 x 350 x 350 mm<br/>description: 1 x angle grinder , 2 x straight grinders WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 350 X 350 MM
DESCRIPTION: 1 X ANGLE GRINDER , 2 X STRAIGHT GRINDERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--digital display - accessories available
workspace
swing over bed 355 mm
swing over cross slide 195 mm
centre distance between top din 806 mk 3 800 mm

lathe spindle
spindle head din 55027 (standard) size 5 tailstock handwheel
quill stroke 110 mm diameter of spindle 50 mm
taper din 228 mk 3

w 150 â?? 3000 rpm speed range

feed range of êºfeinêº par value of 0.025
area of êºsteilêº ratings (only in combination with speed range v) 2.0 mm
thread pitch 0.2 to 14 mm

workpiece weight
largest factory mass between top 100 kg

space requirement approx. 1850 x 900 x 1400 mm

weight 1400 kg
 -DIGITAL DISPLAY - ACCESSORIES AVAILABLE WORKSPACE SWING OVER BED 355 MM SWING OVER CROSS SLIDE 195 MM CENTRE DISTANCE BETWEEN TOP DIN 806 MK 3 800 MM LATHE SPINDLE SPINDLE HEAD DIN 55027 (STANDARD) SIZE 5 TAILSTOCK HANDWHEEL QUILL STROKE 110 MM DIAMETER OF SPINDLE 50 MM TAPER DIN 228 MK 3 W 150 &ACIRC;?? 3000 RPM SPEED RANGE FEED RANGE OF &ECIRC;&ORDM;FEIN&ECIRC;&ORDM; PAR VALUE OF 0.025 AREA OF &ECIRC;&ORDM;STEIL&ECIRC;&ORDM; RATINGS (ONLY IN COMBINATION WITH SPEED RANGE V) 2.0 MM THREAD PITCH 0.2 TO 14 MM WORKPIECE WEIGHT LARGEST FACTORY MASS BETWEEN TOP 100 KG SPACE REQUIREMENT APPROX. 1850 X 900 X 1400 MM WEIGHT 1400 KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 110 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 750 x 350 x 350 mm<br/>description: further details unknown WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 350 X 350 MM
DESCRIPTION: FURTHER DETAILS UNKNOWN
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 799 €
Ubicación: Land-used grinding machine
3.5 kw
with runschleifeinrichtung.
the previous owner has clamped rings to the loops on the turntable and then front ground.
the turntable is on a 2-axis cross table movable/adjustable.
diameter grinding unit: approx. 40 cm
diameter of workpiece clamping: approx. 30 cm
some slip rings are still (photo).
the machine runs perfectly.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  USED GRINDING MACHINE 3.5 KW WITH RUNSCHLEIFEINRICHTUNG. THE PREVIOUS OWNER HAS CLAMPED RINGS TO THE LOOPS ON THE TURNTABLE AND THEN FRONT GROUND. THE TURNTABLE IS ON A 2-AXIS CROSS TABLE MOVABLE/ADJUSTABLE. DIAMETER GRINDING UNIT: APPROX. 40 CM DIAMETER OF WORKPIECE CLAMPING: APPROX. 30 CM SOME SLIP RINGS ARE STILL (PHOTO). THE MACHINE RUNS PERFECTLY. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Precio: 54.500 €
Ubicación: Land-einseitige kantenanleimmaschine\r\nfabrikat: biesse\r\ntyp: stream b1/8.5\r\nbaujahr: 2007\r\n\r\nmit werkstückrückführung\r\n\r\nstandard ausrüstung grundmaschine\r\n- riemenoberdruck mit doppel- v -profil\r\n- elektronische höheneinstellung des oberdrucks\r\n- inverter für die vorschubkettengeschwindigkeit\r\n- eigener inverter für jedes aggregat\r\n- pc benutzeroberfläche windows xp\r\n- statistik-software mit exportmöglichkeit in excel\r\n- unbegrenzte log-dateien \r\n- absaugvorrichtung eingebaut im maschinenbett\r\n\r\nwerkstückauflage\r\nin der breite verstellbare hilfsauflage bestehend aus einem aluminiumprofil mit nicht angetriebenen rollen.\r\n\r\nnc-steuerung\r\n\r\neigenschaften\r\n- betriebssystem windows xp professionell\r\n- sintra maschinensteuerung mit windows xp oberfläche\r\n- positionierung der achsen (maschine rüsten)\r\n- elektronische verstellung der vorschubgeschwindigkeit\r\n- elektronische verstellung des oberdrucks\r\n\r\nfügefräsaggregat\r\nfräsaggregat bestehend aus 2 gegenläufigen fräser mit vertikaler achse.\r\n- drehzahl werkzeug min. 9.000 u/min\r\n- motorleistung min. 3,5 + 3,5 kw\r\n- welle (d. x länge) min. 30 x 50 mm\r\nnc-gesteuerter tastschuh am ersten motor um die stärke des abtrages automatisch verstellen zu können\r\n\r\ninfrarotheizlampe\r\n2 infrarotheizlampen, eine oben eine unten zur vorwärmung der werkstückkante die angeleimt wird.\r\n\r\nleimauftragsstation\r\nanleimstation für gerade kanten aus melaminharz, abs, pvc, pp, furnier\r\nmit thermoplastischen eva- klebstoffen\r\n- patentiertes high- melt system, leimwalze und leimschale getrennt\r\n- schnellwechselsystem der leimschale durch einfaches heraus-schwenken aus dem aggregat\r\n- leimwalze und schale komplett teflonbeschichtet\r\n- leimmengendosierung einfach einstellbar\r\n- elektronische synchronlauf der leimwalze mit plattenvorschub\r\n- granulatbehälter mit schleuse direkt an der aufschmelzeinheit\r\n- kantenüberwachung mittels fotozelle\r\n- automatische kantenwechsel nc-gesteuert\r\ndruckzone:\r\n- 1 angetriebene rolle d= 150 mm\r\n- 3 freilaufende rollen d= 65 mm\r\n\r\ntechnische daten:\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n- kantenquerschnitt kappschere min. 135\r\n- werkstückstärke min. 10 mm max. 60 mm\r\n- kantenhöhe min. 15 mm max. 65 mm\r\n- minimale kantenlänge min. 150 mm\r\n\r\nnc y-achse für druckzone\r\ndie verstellung der druckzone erfolgt motorisiert und wird über die steuerung eingestellt.\r\n\r\nz-achse für kantenzuführung\r\nautomatische höhenverstellung der kantenzuführung, in position zur angetriebenen andruckrolle.\r\n\r\nzwölffach kantenmagazin\r\nkantenmagazin für 12 rollenkanten\r\ndie kantenrollen werden vertikal in das magazin hineingestellt und über eine fotozelle wird das ende der rolle überwacht.\r\ndie auswahl der kante erfolgt von der steuerung und bei hinterlegung des gleichen kantentype wird automatisch beim ende der rolle auf die andere gewechselt.\r\n\r\nkappaggregat it90-s\r\nkappagggregat, komplett mit 2 motoren für anleimstärken bis 3 mm.\r\nneigung der motoren an der vertikalachse von 0° auf 25° mit automatischer schwenkung.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 rqm\r\n- motorleistung min. 0,3 + 0,3 kw\r\n- vorschubgeschwindigkeit min. 28 mt/min\r\n- kantendicke min. 0,3 mm max. 3 mm\r\n- werkstückdicke min. 10 mm max. 60 mm\r\n\r\ntastschuh mit 3 positionen für kappaggregat it90\r\n3 unabhängig voneinander einstellbare anschläge pro sägewagen zum verstellen des y-tastschuhes.\r\ndie auswahl des anschlages erfolgt elektropneumatisch und wird vom pc aus gesteuert.\r\n\r\nvorfräsaggregat rs10\r\ndas aggregat ist mit zwei übereinander angeordneten motoren ausgestattet.\r\nbeide motoren sind mit vertikalen tastrollen ausgestattet.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorlesitung 1,3 + 1,3 kw\r\n\r\nfeinfräsaggregat rf40 - fase 25°\r\njeder motor ist komplett mit horizontalem und vertikalem taster und auf schlitten schwenkbar.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,65 + 0,65 kw\r\n\r\nmultifunktionsfräsaggregat ar30\r\nfür feinfräsen und eckenkopieren an werkstücken mit (abs/pvc/pp) kanten bis 3 mm stärke.\r\neckenkopieren ist an geraden sowie an profilierten kanten als auch an soft- und postformingplatten 90° und 180° werkstücke.\r\nfeinfräsen in hoher qualität\r\n\r\nautomatisches umrüsten von dünn- auf dickkante\r\nes ist möglich das aggregat vom bedienpult aus automatisch von dünnkante (0,4 mm) auf dickkante (3,0 mm) umzustellen.\r\n\r\ntechnische daten:\r\n- drehzahl min. 12.000 u/min.\r\n- motorleistung 0,35 + 0,35 kw\r\n- vorschubgeschwindigkeit max. 18 m/min.\r\n- kantenstärke min. 0,3 mm max. 3 mm\r\n\r\n4 pneumatische festpunkte für seitentaster ar30\r\nnc gesteuerte festpunkte zum verstellen des seitentasters zum bearbeiten von 3 dünnkanten und 2 dickkanten\r\n\r\nautomatisches werkzeugwechselmagazin \r\nautomatischen werkzeugwechsel mit einem 5-fach magazin\r\n\r\nprofilziehklingenaggregat rb40\r\nzur nachbearbeitung für abs/pvc/pp kanten.\r\nenthält eine obere und eine untere einheit mit vertikalen und horizontalen kopierscheiben.\r\nautomatis EINSEITIGE KANTENANLEIMMASCHINE\R\NFABRIKAT: BIESSE\R\NTYP: STREAM B1/8.5\R\NBAUJAHR: 2007\R\N\R\NMIT WERKSTüCKRüCKFüHRUNG\R\N\R\NSTANDARD AUSRüSTUNG GRUNDMASCHINE\R\N- RIEMENOBERDRUCK MIT DOPPEL- V -PROFIL\R\N- ELEKTRONISCHE HöHENEINSTELLUNG DES OBERDRUCKS\R\N- INVERTER FüR DIE VORSCHUBKETTENGESCHWINDIGKEIT\R\N- EIGENER INVERTER FüR JEDES AGGREGAT\R\N- PC BENUTZEROBERFLäCHE WINDOWS XP\R\N- STATISTIK-SOFTWARE MIT EXPORTMöGLICHKEIT IN EXCEL\R\N- UNBEGRENZTE LOG-DATEIEN \R\N- ABSAUGVORRICHTUNG EINGEBAUT IM MASCHINENBETT\R\N\R\NWERKSTüCKAUFLAGE\R\NIN DER BREITE VERSTELLBARE HILFSAUFLAGE BESTEHEND AUS EINEM ALUMINIUMPROFIL MIT NICHT ANGETRIEBENEN ROLLEN.\R\N\R\NNC-STEUERUNG\R\N\R\NEIGENSCHAFTEN\R\N- BETRIEBSSYSTEM WINDOWS XP PROFESSIONELL\R\N- SINTRA MASCHINENSTEUERUNG MIT WINDOWS XP OBERFLäCHE\R\N- POSITIONIERUNG DER ACHSEN (MASCHINE RüSTEN)\R\N- ELEKTRONISCHE VERSTELLUNG DER VORSCHUBGESCHWINDIGKEIT\R\N- ELEKTRONISCHE VERSTELLUNG DES OBERDRUCKS\R\N\R\NFüGEFRäSAGGREGAT\R\NFRäSAGGREGAT BESTEHEND AUS 2 GEGENLäUFIGEN FRäSER MIT VERTIKALER ACHSE.\R\N- DREHZAHL WERKZEUG MIN. 9.000 U/MIN\R\N- MOTORLEISTUNG MIN. 3,5 + 3,5 KW\R\N- WELLE (D. X LäNGE) MIN. 30 X 50 MM\R\NNC-GESTEUERTER TASTSCHUH AM ERSTEN MOTOR UM DIE STäRKE DES ABTRAGES AUTOMATISCH VERSTELLEN ZU KöNNEN\R\N\R\NINFRAROTHEIZLAMPE\R\N2 INFRAROTHEIZLAMPEN, EINE OBEN EINE UNTEN ZUR VORWäRMUNG DER WERKSTüCKKANTE DIE ANGELEIMT WIRD.\R\N\R\NLEIMAUFTRAGSSTATION\R\NANLEIMSTATION FüR GERADE KANTEN AUS MELAMINHARZ, ABS, PVC, PP, FURNIER\R\NMIT THERMOPLASTISCHEN EVA- KLEBSTOFFEN\R\N- PATENTIERTES HIGH- MELT SYSTEM, LEIMWALZE UND LEIMSCHALE GETRENNT\R\N- SCHNELLWECHSELSYSTEM DER LEIMSCHALE DURCH EINFACHES HERAUS-SCHWENKEN AUS DEM AGGREGAT\R\N- LEIMWALZE UND SCHALE KOMPLETT TEFLONBESCHICHTET\R\N- LEIMMENGENDOSIERUNG EINFACH EINSTELLBAR\R\N- ELEKTRONISCHE SYNCHRONLAUF DER LEIMWALZE MIT PLATTENVORSCHUB\R\N- GRANULATBEHäLTER MIT SCHLEUSE DIREKT AN DER AUFSCHMELZEINHEIT\R\N- KANTENüBERWACHUNG MITTELS FOTOZELLE\R\N- AUTOMATISCHE KANTENWECHSEL NC-GESTEUERT\R\NDRUCKZONE:\R\N- 1 ANGETRIEBENE ROLLE D= 150 MM\R\N- 3 FREILAUFENDE ROLLEN D= 65 MM\R\N\R\NTECHNISCHE DATEN:\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N- KANTENQUERSCHNITT KAPPSCHERE MIN. 135\R\N- WERKSTüCKSTäRKE MIN. 10 MM MAX. 60 MM\R\N- KANTENHöHE MIN. 15 MM MAX. 65 MM\R\N- MINIMALE KANTENLäNGE MIN. 150 MM\R\N\R\NNC Y-ACHSE FüR DRUCKZONE\R\NDIE VERSTELLUNG DER DRUCKZONE ERFOLGT MOTORISIERT UND WIRD üBER DIE STEUERUNG EINGESTELLT.\R\N\R\NZ-ACHSE FüR KANTENZUFüHRUNG\R\NAUTOMATISCHE HöHENVERSTELLUNG DER KANTENZUFüHRUNG, IN POSITION ZUR ANGETRIEBENEN ANDRUCKROLLE.\R\N\R\NZWöLFFACH KANTENMAGAZIN\R\NKANTENMAGAZIN FüR 12 ROLLENKANTEN\R\NDIE KANTENROLLEN WERDEN VERTIKAL IN DAS MAGAZIN HINEINGESTELLT UND üBER EINE FOTOZELLE WIRD DAS ENDE DER ROLLE üBERWACHT.\R\NDIE AUSWAHL DER KANTE ERFOLGT VON DER STEUERUNG UND BEI HINTERLEGUNG DES GLEICHEN KANTENTYPE WIRD AUTOMATISCH BEIM ENDE DER ROLLE AUF DIE ANDERE GEWECHSELT.\R\N\R\NKAPPAGGREGAT IT90-S\R\NKAPPAGGGREGAT, KOMPLETT MIT 2 MOTOREN FüR ANLEIMSTäRKEN BIS 3 MM.\R\NNEIGUNG DER MOTOREN AN DER VERTIKALACHSE VON 0° AUF 25° MIT AUTOMATISCHER SCHWENKUNG.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 RQM\R\N- MOTORLEISTUNG MIN. 0,3 + 0,3 KW\R\N- VORSCHUBGESCHWINDIGKEIT MIN. 28 MT/MIN\R\N- KANTENDICKE MIN. 0,3 MM MAX. 3 MM\R\N- WERKSTüCKDICKE MIN. 10 MM MAX. 60 MM\R\N\R\NTASTSCHUH MIT 3 POSITIONEN FüR KAPPAGGREGAT IT90\R\N3 UNABHäNGIG VONEINANDER EINSTELLBARE ANSCHLäGE PRO SäGEWAGEN ZUM VERSTELLEN DES Y-TASTSCHUHES.\R\NDIE AUSWAHL DES ANSCHLAGES ERFOLGT ELEKTROPNEUMATISCH UND WIRD VOM PC AUS GESTEUERT.\R\N\R\NVORFRäSAGGREGAT RS10\R\NDAS AGGREGAT IST MIT ZWEI üBEREINANDER ANGEORDNETEN MOTOREN AUSGESTATTET.\R\NBEIDE MOTOREN SIND MIT VERTIKALEN TASTROLLEN AUSGESTATTET.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLESITUNG 1,3 + 1,3 KW\R\N\R\NFEINFRäSAGGREGAT RF40 - FASE 25°\R\NJEDER MOTOR IST KOMPLETT MIT HORIZONTALEM UND VERTIKALEM TASTER UND AUF SCHLITTEN SCHWENKBAR.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,65 + 0,65 KW\R\N\R\NMULTIFUNKTIONSFRäSAGGREGAT AR30\R\NFüR FEINFRäSEN UND ECKENKOPIEREN AN WERKSTüCKEN MIT (ABS/PVC/PP) KANTEN BIS 3 MM STäRKE.\R\NECKENKOPIEREN IST AN GERADEN SOWIE AN PROFILIERTEN KANTEN ALS AUCH AN SOFT- UND POSTFORMINGPLATTEN 90° UND 180° WERKSTüCKE.\R\NFEINFRäSEN IN HOHER QUALITäT\R\N\R\NAUTOMATISCHES UMRüSTEN VON DüNN- AUF DICKKANTE\R\NES IST MöGLICH DAS AGGREGAT VOM BEDIENPULT AUS AUTOMATISCH VON DüNNKANTE (0,4 MM) AUF DICKKANTE (3,0 MM) UMZUSTELLEN.\R\N\R\NTECHNISCHE DATEN:\R\N- DREHZAHL MIN. 12.000 U/MIN.\R\N- MOTORLEISTUNG 0,35 + 0,35 KW\R\N- VORSCHUBGESCHWINDIGKEIT MAX. 18 M/MIN.\R\N- KANTENSTäRKE MIN. 0,3 MM MAX. 3 MM\R\N\R\N4 PNEUMATISCHE FESTPUNKTE FüR SEITENTASTER AR30\R\NNC GESTEUERTE FESTPUNKTE ZUM VERSTELLEN DES SEITENTASTERS ZUM BEARBEITEN VON 3 DüNNKANTEN UND 2 DICKKANTEN\R\N\R\NAUTOMATISCHES WERKZEUGWECHSELMAGAZIN \R\NAUTOMATISCHEN WERKZEUGWECHSEL MIT EINEM 5-FACH MAGAZIN\R\N\R\NPROFILZIEHKLINGENAGGREGAT RB40\R\NZUR NACHBEARBEITUNG FüR ABS/PVC/PP KANTEN.\R\NENTHäLT EINE OBERE UND EINE UNTERE EINHEIT MIT VERTIKALEN UND HORIZONTALEN KOPIERSCHEIBEN.\R\NAUTOMATIS
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-gebr. magnetic drill make fine
	model ddsk 672-1 built in 2005
	left and right rotation

spindle mount mt 3
	gr. bohr-ã? 32 mm
	4 spindle speeds 100 â?? 150-260-420 rpm
	connection 220 v, 900 w
	
	with magnetbohrstã¤nder make elbe model dx 32
	220 v connection
	external dimensions:
	width 450 mm
		depth 500 mm
		height 600 mm
	weight approx.		45 kg

GEBR. MAGNETIC DRILL MAKE FINE MODEL DDSK 672-1 BUILT IN 2005 LEFT AND RIGHT ROTATION SPINDLE MOUNT MT 3 GR. BOHR-&ATILDE;? 32 MM 4 SPINDLE SPEEDS 100 &ACIRC;?? 150-260-420 RPM CONNECTION 220 V, 900 W WITH MAGNETBOHRST&ATILDE;&CURREN;NDER MAKE ELBE MODEL DX 32 220 V CONNECTION EXTERNAL DIMENSIONS: WIDTH 450 MM DEPTH 500 MM HEIGHT 600 MM WEIGHT APPROX. 45 KG
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 1500 mm<br/>centre height: 175 mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>basis:<br/>kellenberger kel-varia ur175-1500<br/>(fotos von bereits gelieferter maschine mit<br/>spitzenweite 1000mm)<br/><br/>schleifkopf ur mit t1-t2-t3<br/><br/>grundausstattung:<br/><br/>-b-achse hochauflösend<br/>-marposs messeinrichtung zur werkzeugvermessung<br/>-schwenken um die scheibenkante<br/>-aktive längspositionierung<br/>-gap an t1 berührungslos<br/>-v-konstant<br/>-reitstock  mit handrückzug<br/>-wss mit konus mk5, optional mit adapter mk5/kurzkegel<br/><br/>folgende ausstattungen frei wählbar:<br/><br/>-schleifscheibendurchmesser t1<br/>-schleifscheibendurchmesser t2<br/>-innenschleifeinrichtung riemengetrieben oder<br/>-innenschleifeinrichtung mit hf spindel<br/>-durchmesser-messeinrichtung<br/>-hydraulischer pinolenrückzug<br/>-mikroverstellung am reitstock<br/>-werkstückspindelstock mit mk5 und kurzkegelaufnahme din 55026<br/>-cnc-gesteuerte c-achse in verbindung mit werkstückspindelstock s.o.<br/>-unrundschleifen<br/>-verstärkter werkstückspindelstock<br/>-spitzenerhöhung<br/><br/>weitere optionen auf anfrage möglich<br/><br/>es werden ausschließlich konkrete anfragen mit genauer<br/>ausstattungskonfiguration von anwendern bearbeitet<br/><br/><br/>mechanische Überholung:<br/><br/>-komplette maschine nach kellenberger messprotokoll überholt<br/>-neue servicefreundliche kabine<br/>-neulackierung<br/><br/>elektrische Überholung:<br/><br/>-neue moderne cnc-rundschleifmaschinen-steuerung<br/>-neu aufgebauter schaltschrank<br/>-neue antriebstechnik<br/>-austausch sämtlicher elektrischer leitungen berus druckschalter etc.<br/>-neue absolut-glasmaßstäbe in x- und z<br/>-neuer absolut drehgeber (bei-b-achse)<br/><br/><br/><br/><br/><br/><br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 1500 MM
CENTRE HEIGHT: 175 MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
BASIS:
KELLENBERGER KEL-VARIA UR175-1500
(FOTOS VON BEREITS GELIEFERTER MASCHINE MIT
SPITZENWEITE 1000MM)

SCHLEIFKOPF UR MIT T1-T2-T3

GRUNDAUSSTATTUNG:

-B-ACHSE HOCHAUFLöSEND
-MARPOSS MESSEINRICHTUNG ZUR WERKZEUGVERMESSUNG
-SCHWENKEN UM DIE SCHEIBENKANTE
-AKTIVE LäNGSPOSITIONIERUNG
-GAP AN T1 BERüHRUNGSLOS
-V-KONSTANT
-REITSTOCK MIT HANDRüCKZUG
-WSS MIT KONUS MK5, OPTIONAL MIT ADAPTER MK5/KURZKEGEL

FOLGENDE AUSSTATTUNGEN FREI WäHLBAR:

-SCHLEIFSCHEIBENDURCHMESSER T1
-SCHLEIFSCHEIBENDURCHMESSER T2
-INNENSCHLEIFEINRICHTUNG RIEMENGETRIEBEN ODER
-INNENSCHLEIFEINRICHTUNG MIT HF SPINDEL
-DURCHMESSER-MESSEINRICHTUNG
-HYDRAULISCHER PINOLENRüCKZUG
-MIKROVERSTELLUNG AM REITSTOCK
-WERKSTüCKSPINDELSTOCK MIT MK5 UND KURZKEGELAUFNAHME DIN 55026
-CNC-GESTEUERTE C-ACHSE IN VERBINDUNG MIT WERKSTüCKSPINDELSTOCK S.O.
-UNRUNDSCHLEIFEN
-VERSTäRKTER WERKSTüCKSPINDELSTOCK
-SPITZENERHöHUNG

WEITERE OPTIONEN AUF ANFRAGE MöGLICH

ES WERDEN AUSSCHLIEßLICH KONKRETE ANFRAGEN MIT GENAUER
AUSSTATTUNGSKONFIGURATION VON ANWENDERN BEARBEITET


MECHANISCHE ÜBERHOLUNG:

-KOMPLETTE MASCHINE NACH KELLENBERGER MESSPROTOKOLL üBERHOLT
-NEUE SERVICEFREUNDLICHE KABINE
-NEULACKIERUNG

ELEKTRISCHE ÜBERHOLUNG:

-NEUE MODERNE CNC-RUNDSCHLEIFMASCHINEN-STEUERUNG
-NEU AUFGEBAUTER SCHALTSCHRANK
-NEUE ANTRIEBSTECHNIK
-AUSTAUSCH SäMTLICHER ELEKTRISCHER LEITUNGEN BERUS DRUCKSCHALTER ETC.
-NEUE ABSOLUT-GLASMAßSTäBE IN X- UND Z
-NEUER ABSOLUT DREHGEBER (BEI-B-ACHSE)










Vendedor: BEMA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)