2777 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-cct fermentation tanks landaluce 2085 hl

indoor type vertical beer fermentation ccts tanks delivered by spanish landaluce in year 1997 totally 17 tanks, each with two cooling zone on the side of the tank, cone is not cooled. cooling media is glycol solution. tanks are self standing not insulated stainless steel tanks equipped with inbuilt cleaning head and safety valves for vacuum and overpressure and set temperature sensors.

manufacturer: landaluce s.a spain
manufacturing year: 1997
gross volume: 2085 hl
net volume: 2500 hl
number of tanks: 17
working pressure: 0.69 bar + statistic pressure
working pressure of jacket: 2 bar
design vacuum: 100 mbar
working temperature: 20 c
tank diameter: 5.4 m
total height with legs: 15.8 m
empty weight: 15000 kg . CCT FERMENTATION TANKS LANDALUCE 2085 HL INDOOR TYPE VERTICAL BEER FERMENTATION CCTS TANKS DELIVERED BY SPANISH LANDALUCE IN YEAR 1997 TOTALLY 17 TANKS, EACH WITH TWO COOLING ZONE ON THE SIDE OF THE TANK, CONE IS NOT COOLED. COOLING MEDIA IS GLYCOL SOLUTION. TANKS ARE SELF STANDING NOT INSULATED STAINLESS STEEL TANKS EQUIPPED WITH INBUILT CLEANING HEAD AND SAFETY VALVES FOR VACUUM AND OVERPRESSURE AND SET TEMPERATURE SENSORS. MANUFACTURER: LANDALUCE S.A SPAIN MANUFACTURING YEAR: 1997 GROSS VOLUME: 2085 HL NET VOLUME: 2500 HL NUMBER OF TANKS: 17 WORKING PRESSURE: 0.69 BAR + STATISTIC PRESSURE WORKING PRESSURE OF JACKET: 2 BAR DESIGN VACUUM: 100 MBAR WORKING TEMPERATURE: 20 C TANK DIAMETER: 5.4 M TOTAL HEIGHT WITH LEGS: 15.8 M EMPTY WEIGHT: 15000 KG .
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make vollrath, type ewthv 0.5, no 24.643, new 2002, dissolver , material mild steel , shaft length 290mm, disc diameter (2x)dia.34mm, dia.47mm, dia.87mm, motor 0,30 kw, 218-242/380-420 volt (ex), with variable speed drive , speed mixing shaft 259-1964 rpm, floorspace 0,6x0,35 m, total height 0,95 m, weight 100 kg, height pan max.250mmdissolversmixers > dissolvers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE VOLLRATH, TYPE EWTHV 0.5, NO 24.643, NEW 2002, DISSOLVER , MATERIAL MILD STEEL , SHAFT LENGTH 290MM, DISC DIAMETER (2X)DIA.34MM, DIA.47MM, DIA.87MM, MOTOR 0,30 KW, 218-242/380-420 VOLT (EX), WITH VARIABLE SPEED DRIVE , SPEED MIXING SHAFT 259-1964 RPM, FLOORSPACE 0,6X0,35 M, TOTAL HEIGHT 0,95 M, WEIGHT 100 KG, HEIGHT PAN MAX.250MMDISSOLVERSMIXERS > DISSOLVERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-bottle washing machine khs ec 14/95 single end 10 000 bph

this bottle washer was delivered in year 2000 and dismantled in 2009 and it has been in a warehouse ever since. the washing machine is single ended and designed for glass 0.33 and 0.5 liter glass bottles, max diameter 78 mm and max height 300 mm. the washer has siemens simatic s7 based control unit with a touch screen. this unit has been inspected by jade trading in december 2015 and according to our estimate all components, parts and mechanisms of machines are in good or satisfactory condition - only normal service is needed. our report is available for interested parties.

main technical data:

manufactory: khs, germany.
year: 2000.
model: ec 14/95 s22n01.
type: single end
ser. number: 1683
capacity: 9 000 – 10 000 bph.
bottles in a row: 14 pcs.
main step: 169 mm.
diameter of bottles: max. 78 mm.
height of bottles: min. 150 mm. max. 300 mm.
main dimensions: 7250 x 4215 x 3380 mm.
machine weight: 21 000 kg. BOTTLE WASHING MACHINE KHS EC 14/95 SINGLE END 10 000 BPH THIS BOTTLE WASHER WAS DELIVERED IN YEAR 2000 AND DISMANTLED IN 2009 AND IT HAS BEEN IN A WAREHOUSE EVER SINCE. THE WASHING MACHINE IS SINGLE ENDED AND DESIGNED FOR GLASS 0.33 AND 0.5 LITER GLASS BOTTLES, MAX DIAMETER 78 MM AND MAX HEIGHT 300 MM. THE WASHER HAS SIEMENS SIMATIC S7 BASED CONTROL UNIT WITH A TOUCH SCREEN. THIS UNIT HAS BEEN INSPECTED BY JADE TRADING IN DECEMBER 2015 AND ACCORDING TO OUR ESTIMATE ALL COMPONENTS, PARTS AND MECHANISMS OF MACHINES ARE IN GOOD OR SATISFACTORY CONDITION - ONLY NORMAL SERVICE IS NEEDED. OUR REPORT IS AVAILABLE FOR INTERESTED PARTIES. MAIN TECHNICAL DATA: MANUFACTORY: KHS, GERMANY. YEAR: 2000. MODEL: EC 14/95 S22N01. TYPE: SINGLE END SER. NUMBER: 1683 CAPACITY: 9 000 – 10 000 BPH. BOTTLES IN A ROW: 14 PCS. MAIN STEP: 169 MM. DIAMETER OF BOTTLES: MAX. 78 MM. HEIGHT OF BOTTLES: MIN. 150 MM. MAX. 300 MM. MAIN DIMENSIONS: 7250 X 4215 X 3380 MM. MACHINE WEIGHT: 21 000 KG.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 194.500 €
Ubicación: Land-dump truck 15 cbm, air condition, body extension, body heating, big tailgate, tyres 50%; gross weight [kg]: 22500; accessories: dumper 15 cbm, air condition, muldenerhöhung, muldenheizung, große heckklappe, reifen 50% // dump truck 15 cbm, air condition, body extension, body heating, big tailgate, tyres 50%, heckklappe, muldenheizung, muldenerhöhung DUMP TRUCK 15 CBM, AIR CONDITION, BODY EXTENSION, BODY HEATING, BIG TAILGATE, TYRES 50%; GROSS WEIGHT [KG]: 22500; ACCESSORIES: DUMPER 15 CBM, AIR CONDITION, MULDENERHöHUNG, MULDENHEIZUNG, GROßE HECKKLAPPE, REIFEN 50% // DUMP TRUCK 15 CBM, AIR CONDITION, BODY EXTENSION, BODY HEATING, BIG TAILGATE, TYRES 50%, HECKKLAPPE, MULDENHEIZUNG, MULDENERHöHUNG
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-wartsila 41 mw single cycle power plant with 6 x 16v34sg gas generators - 2008
 
complete running power plant with 6 units of wartsila 16v34sg spark ignited natural gas engine driven generators. the equipment was delivered and commissioned by wartsila in year 2008 and today the units have approx 25 000 operating hours. the equipment is in very good operational condition but the engines need a 24 000 hour overhaul.
 
generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.
 
the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power
 
main technical data at full load and current site conditions:
 
installed power: 41 820 kw at 31.5 kv, 50 hz
fuel: natural gas
engines: 6 x w16v34sg, running at 750 rpm
alternators: 6 x akv 8712 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2008
operating hours: approx 25000 /unit
original heat rate (at alt. term) 8140 kj/kwhe (44.2 %)
plant own consumption: 836 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: very good, operational WARTSILA 41 MW SINGLE CYCLE POWER PLANT WITH 6 X 16V34SG GAS GENERATORS - 2008 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 16V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. THE EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2008 AND TODAY THE UNITS HAVE APPROX 25 000 OPERATING HOURS. THE EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 24 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER: 41 820 KW AT 31.5 KV, 50 HZ FUEL: NATURAL GAS ENGINES: 6 X W16V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X AKV 8712 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2008 OPERATING HOURS: APPROX 25000 /UNIT ORIGINAL HEAT RATE (AT ALT. TERM) 8140 KJ/KWHE (44.2 %) PLANT OWN CONSUMPTION: 836 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: VERY GOOD, OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; gross weight [kg]: 21100; rear tyres remaining: 50; front tyres remaining: 50; maximum lift capacity [kg]: 250 ; GROSS WEIGHT [KG]: 21100; REAR TYRES REMAINING: 50; FRONT TYRES REMAINING: 50; MAXIMUM LIFT CAPACITY [KG]: 250
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-labeling machine krones autocol 747 rotary pressure sensitive 55 000 bph

this labeling machine was manufactured in year 2009 by krones and it has been operated very limited hours till year 2012. it has three double reel stations for self-adhesive paper and film labels to be placed on front-back-neck of a bottle. each container plate on the container table is powered by a computer controlled actuator. the bottle rotations required for rolling on the labels are conducted according to a set program. when changing over to a new type label, no mechanical cam must be changed. capacity with 0.5 liter glass bottle is 55 000 bph, the labeler is still installed and in excellent condition (with a aci empty bottle inspector, europool dryer and krones checkmatic label inspector and related conveyors)
technical data of this labeler:
- manufactured by korones ag in year 2009
- estimated running hours approx 15 000 only
- model autocol asl k-747-838a34
- three label stations with double reels for discontinuous reel change over
- 60 computer controlled container stations
- front-back-neck adhesive paper and film labels
- capacity 55 000 bph with 0.5 liter glass bottle
- simens simatic s7 plc with touch screen
- helix style infeed and discharge
- videojet laser coder
- vertical sliding safety guards with interlocks LABELING MACHINE KRONES AUTOCOL 747 ROTARY PRESSURE SENSITIVE 55 000 BPH THIS LABELING MACHINE WAS MANUFACTURED IN YEAR 2009 BY KRONES AND IT HAS BEEN OPERATED VERY LIMITED HOURS TILL YEAR 2012. IT HAS THREE DOUBLE REEL STATIONS FOR SELF-ADHESIVE PAPER AND FILM LABELS TO BE PLACED ON FRONT-BACK-NECK OF A BOTTLE. EACH CONTAINER PLATE ON THE CONTAINER TABLE IS POWERED BY A COMPUTER CONTROLLED ACTUATOR. THE BOTTLE ROTATIONS REQUIRED FOR ROLLING ON THE LABELS ARE CONDUCTED ACCORDING TO A SET PROGRAM. WHEN CHANGING OVER TO A NEW TYPE LABEL, NO MECHANICAL CAM MUST BE CHANGED. CAPACITY WITH 0.5 LITER GLASS BOTTLE IS 55 000 BPH, THE LABELER IS STILL INSTALLED AND IN EXCELLENT CONDITION (WITH A ACI EMPTY BOTTLE INSPECTOR, EUROPOOL DRYER AND KRONES CHECKMATIC LABEL INSPECTOR AND RELATED CONVEYORS) TECHNICAL DATA OF THIS LABELER: - MANUFACTURED BY KORONES AG IN YEAR 2009 - ESTIMATED RUNNING HOURS APPROX 15 000 ONLY - MODEL AUTOCOL ASL K-747-838A34 - THREE LABEL STATIONS WITH DOUBLE REELS FOR DISCONTINUOUS REEL CHANGE OVER - 60 COMPUTER CONTROLLED CONTAINER STATIONS - FRONT-BACK-NECK ADHESIVE PAPER AND FILM LABELS - CAPACITY 55 000 BPH WITH 0.5 LITER GLASS BOTTLE - SIMENS SIMATIC S7 PLC WITH TOUCH SCREEN - HELIX STYLE INFEED AND DISCHARGE - VIDEOJET LASER CODER - VERTICAL SLIDING SAFETY GUARDS WITH INTERLOCKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6250; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6250; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-oil free screw air compressor atlas-copco zr 250 with mb 600 desiccant dryer
 
the compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. package includes also md adsorption dryer for out let air which don't need any external energy (purge air). the equipment is a sound canopy and it is controlled with advanced eletronikon control system. the compressor in good operational condition, it has ce marking and it is still installed and can be tested. running video available
 
technical data
manufactured by: atlas copco belgium
made in year: 1997
type: zr 250
serial number: atf 053886
total operation hours: 64200
loaded hours: 50700
capacity (fad): 37.7 m3/min at 10.0 bar
electric motor: 250 kw
compressor rotating speed: 1485 rpm
air dryer: atlas-copco md 600, sr no aio 009885
compressor dimensions: 4.34 x 2.00 x 1.65 m (l x h x w)
weight - compressor 5360 kg OIL FREE SCREW AIR COMPRESSOR ATLAS-COPCO ZR 250 WITH MB 600 DESICCANT DRYER THE COMPRESSOR IS WATER COOLED AND TOTALLY OIL FREE TWO STAGE SCREW COMPRESSOR WITH INTER- AND AFTER COOLERS. PACKAGE INCLUDES ALSO MD ADSORPTION DRYER FOR OUT LET AIR WHICH DON'T NEED ANY EXTERNAL ENERGY (PURGE AIR). THE EQUIPMENT IS A SOUND CANOPY AND IT IS CONTROLLED WITH ADVANCED ELETRONIKON CONTROL SYSTEM. THE COMPRESSOR IN GOOD OPERATIONAL CONDITION, IT HAS CE MARKING AND IT IS STILL INSTALLED AND CAN BE TESTED. RUNNING VIDEO AVAILABLE TECHNICAL DATA MANUFACTURED BY: ATLAS COPCO BELGIUM MADE IN YEAR: 1997 TYPE: ZR 250 SERIAL NUMBER: ATF 053886 TOTAL OPERATION HOURS: 64200 LOADED HOURS: 50700 CAPACITY (FAD): 37.7 M3/MIN AT 10.0 BAR ELECTRIC MOTOR: 250 KW COMPRESSOR ROTATING SPEED: 1485 RPM AIR DRYER: ATLAS-COPCO MD 600, SR NO AIO 009885 COMPRESSOR DIMENSIONS: 4.34 X 2.00 X 1.65 M (L X H X W) WEIGHT - COMPRESSOR 5360 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 19.900 €
Ubicación: Land-; gross weight [kg]: 11710; rear tyres remaining: 70; front tyres remaining: 70; maximum lift capacity [kg]: 250 ; GROSS WEIGHT [KG]: 11710; REAR TYRES REMAINING: 70; FRONT TYRES REMAINING: 70; MAXIMUM LIFT CAPACITY [KG]: 250
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-well-functioning used hatz engine (diesel) type 4m41

49 kw at 2500 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  WELL-FUNCTIONING USED HATZ ENGINE (DIESEL) TYPE 4M41 49 KW AT 2500 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: 6.500 €
Ubicación: Land-; accessories: bordcomputer / monitor; working width [cm]: 2100 ; ACCESSORIES: BORDCOMPUTER / MONITOR; WORKING WIDTH [CM]: 2100
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-liquid chiller gea grasso fx 2800 / s - 2 x 2800 kw

two gea grasso fx pv 2800 s - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. the compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type they have been operated only 15 000 hours, their cooling capacity is 2800 kw/unit. refrigerant is r717 (nh3)

the delivery includes complete system with compressor package, evaporators, pumps, intermediate nh3 tanks, evaporative condenser and control cabinets.

the screw compressor sucks nh3 gas out of the liquid separator and compresses it up to condensation pressure. the refrigerant turns to liquid as it is cooled in the condenser. the liquid nh3 is injected back to the liquid separator via a high pressure float valve as expansion device. inside the liquid separator liquid form and gas for are separated. the liquid nh3 passes in a gravity driven circuit to the evaporator. during the evaporation into gaseous form (with heat energy delivered by the secondary refrigerant) it evaporates and a mixture of gas and liquid is coming back to the liquid separator. oil is injected into the working chamber of the screw compressor during operation and it is then separated again from the refrigerant in the discharge side oil separator. the oil which has heated up in the compressor is cooled in an oil cooler to reach the entry temperature and passes a fine filter.

this liquid chillers is equipped with a freely programmable standard logic controller plc simatic c7-633. all operating and fault signals as well as the process variables can be read from a lcd display with background lighting. the display is operated via a robust foil keyboard having 6 functions and 24 system keys.

technical data:

manufacturer: gea grasso gmbh
manufacturing year: 2002
number of units: 2 complete units
type: grasso fx vp 2008 / s
cooling capacity: 2800 kw / unit
electric motor: schorch 560 kw / 2988 rpm / 50 hz
refrigerant: r 717 (ammonia)
evaporator: alfa-laval m20-mwfrc
evaporative condenser: bac xx
compressor package ew: 13250 kg LIQUID CHILLER GEA GRASSO FX 2800 / S - 2 X 2800 KW TWO GEA GRASSO FX PV 2800 S - SCREW TYPE LIQUID CHILLER COMPRESSORS WERE INSTALLED IN 2003 (MADE IN 2002) AND THEY STILL INSTALLED AND IN VERY GOOD WORKING CONDITION. THE COMPRESSORS HAVE FLOODED EVAPORATION, PLATE TYPE EVAPORATOR AND EVAPORATIVE CONDENSER COOLER. TYPE THEY HAVE BEEN OPERATED ONLY 15 000 HOURS, THEIR COOLING CAPACITY IS 2800 KW/UNIT. REFRIGERANT IS R717 (NH3) THE DELIVERY INCLUDES COMPLETE SYSTEM WITH COMPRESSOR PACKAGE, EVAPORATORS, PUMPS, INTERMEDIATE NH3 TANKS, EVAPORATIVE CONDENSER AND CONTROL CABINETS. THE SCREW COMPRESSOR SUCKS NH3 GAS OUT OF THE LIQUID SEPARATOR AND COMPRESSES IT UP TO CONDENSATION PRESSURE. THE REFRIGERANT TURNS TO LIQUID AS IT IS COOLED IN THE CONDENSER. THE LIQUID NH3 IS INJECTED BACK TO THE LIQUID SEPARATOR VIA A HIGH PRESSURE FLOAT VALVE AS EXPANSION DEVICE. INSIDE THE LIQUID SEPARATOR LIQUID FORM AND GAS FOR ARE SEPARATED. THE LIQUID NH3 PASSES IN A GRAVITY DRIVEN CIRCUIT TO THE EVAPORATOR. DURING THE EVAPORATION INTO GASEOUS FORM (WITH HEAT ENERGY DELIVERED BY THE SECONDARY REFRIGERANT) IT EVAPORATES AND A MIXTURE OF GAS AND LIQUID IS COMING BACK TO THE LIQUID SEPARATOR. OIL IS INJECTED INTO THE WORKING CHAMBER OF THE SCREW COMPRESSOR DURING OPERATION AND IT IS THEN SEPARATED AGAIN FROM THE REFRIGERANT IN THE DISCHARGE SIDE OIL SEPARATOR. THE OIL WHICH HAS HEATED UP IN THE COMPRESSOR IS COOLED IN AN OIL COOLER TO REACH THE ENTRY TEMPERATURE AND PASSES A FINE FILTER. THIS LIQUID CHILLERS IS EQUIPPED WITH A FREELY PROGRAMMABLE STANDARD LOGIC CONTROLLER PLC SIMATIC C7-633. ALL OPERATING AND FAULT SIGNALS AS WELL AS THE PROCESS VARIABLES CAN BE READ FROM A LCD DISPLAY WITH BACKGROUND LIGHTING. THE DISPLAY IS OPERATED VIA A ROBUST FOIL KEYBOARD HAVING 6 FUNCTIONS AND 24 SYSTEM KEYS. TECHNICAL DATA: MANUFACTURER: GEA GRASSO GMBH MANUFACTURING YEAR: 2002 NUMBER OF UNITS: 2 COMPLETE UNITS TYPE: GRASSO FX VP 2008 / S COOLING CAPACITY: 2800 KW / UNIT ELECTRIC MOTOR: SCHORCH 560 KW / 2988 RPM / 50 HZ REFRIGERANT: R 717 (AMMONIA) EVAPORATOR: ALFA-LAVAL M20-MWFRC EVAPORATIVE CONDENSER: BAC XX COMPRESSOR PACKAGE EW: 13250 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-bore capacity in steel (diameter): 40 mm<br/>arm length: 1250 mm<br/>workpiece height max.: 1000 mm<br/>turning speeds: 40-1700 u/min<br/>bore spindles - morse taper: 4 mk<br/>engine output: 4,2 kw<br/>weight: 3,5 t<br/>range l-w-h: 2 x 1,0 x 2,9 mm<br/>feed movement: 325 mm<br/>floor plate size:: 1500x910 mm<br/>feeds: 0,12-1,2 mm/u<br/>- sviweling cube<br/>- tool holder<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> BORE CAPACITY IN STEEL (DIAMETER): 40 MM
ARM LENGTH: 1250 MM
WORKPIECE HEIGHT MAX.: 1000 MM
TURNING SPEEDS: 40-1700 U/MIN
BORE SPINDLES - MORSE TAPER: 4 MK
ENGINE OUTPUT: 4,2 KW
WEIGHT: 3,5 T
RANGE L-W-H: 2 X 1,0 X 2,9 MM
FEED MOVEMENT: 325 MM
FLOOR PLATE SIZE:: 1500X910 MM
FEEDS: 0,12-1,2 MM/U
- SVIWELING CUBE
- TOOL HOLDER



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Precio: 3.450 €
Ubicación: Land--length of cut 3200 mm
-cutting width 1250 mm
-ritz unit
-power 7 kw -LENGTH OF CUT 3200 MM -CUTTING WIDTH 1250 MM -RITZ UNIT -POWER 7 KW
Vendedor: MSH-nrw GmbH
Año de construcción: usado
Ubicación: Land-turning diameter:  mm<br/>turning length:  mm<br/>control:  <br/>--------------------------------------------------:  <br/>basic functions:  <br/>- design principle: inclined bed:        <br/>- number of spindles:      1  <br/>- number of x/z slides:      1  <br/>- number of turrets:      1  <br/>- live positions: no:        <br/>working range turning:  <br/>- turning diameter (max):    370 mm<br/>- bar diameter (max):     74 mm<br/>- worpiece length max.:    700 mm<br/>main spindle:  <br/>- spindle revolutions (min):     10 /min<br/>- spindle revolutions (max):   3500 /min<br/>- drive power s6 40%:     27 kw<br/>x/z slide:  <br/>- tool fixture: turret:        <br/>- number of tool positions (total):     12  <br/>dimensions / weights:  <br/>- total weight approx.:   5500 kg<br/>attachments (turning):  <br/>- self-centering chuck:      1  <br/>- - clamping diameter:    250 mm<br/>- tailstock: yes:        <br/>- automatic bar fixture attachment: yes:        <br/>- chip conveyor: yes:        <br/>- coolant through turret: yes:        <br/>- european ce standards: yes:        <br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> TURNING DIAMETER: MM
TURNING LENGTH: MM
CONTROL:
--------------------------------------------------:
BASIC FUNCTIONS:
- DESIGN PRINCIPLE: INCLINED BED:
- NUMBER OF SPINDLES: 1
- NUMBER OF X/Z SLIDES: 1
- NUMBER OF TURRETS: 1
- LIVE POSITIONS: NO:
WORKING RANGE TURNING:
- TURNING DIAMETER (MAX): 370 MM
- BAR DIAMETER (MAX): 74 MM
- WORPIECE LENGTH MAX.: 700 MM
MAIN SPINDLE:
- SPINDLE REVOLUTIONS (MIN): 10 /MIN
- SPINDLE REVOLUTIONS (MAX): 3500 /MIN
- DRIVE POWER S6 40%: 27 KW
X/Z SLIDE:
- TOOL FIXTURE: TURRET:
- NUMBER OF TOOL POSITIONS (TOTAL): 12
DIMENSIONS / WEIGHTS:
- TOTAL WEIGHT APPROX.: 5500 KG
ATTACHMENTS (TURNING):
- SELF-CENTERING CHUCK: 1
- - CLAMPING DIAMETER: 250 MM
- TAILSTOCK: YES:
- AUTOMATIC BAR FIXTURE ATTACHMENT: YES:
- CHIP CONVEYOR: YES:
- COOLANT THROUGH TURRET: YES:
- EUROPEAN CE STANDARDS: YES:



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-roller table / table saw
-sliding table way 250 mm
-rotating blade to 45 degrees
-table size 785 x 500 mm ROLLER TABLE / TABLE SAW -SLIDING TABLE WAY 250 MM -ROTATING BLADE TO 45 DEGREES -TABLE SIZE 785 X 500 MM
Vendedor: MSH-nrw GmbH
Año de construcción: usado
Ubicación: Land-x-travel: 800 mm<br/>y-travel: 300 mm<br/>z-travel: 400 mm<br/>spindle taper: sk 40 <br/>quill stroke: 100 mm<br/>turning speed range: 18: 40-2000 u/min<br/>table-size: 1000 x 400 mm<br/>feed range: 18: 10-500 mm/min<br/>total power requirement: 2,2 kw<br/>weight of the machine ca.: 2 t<br/>dimensions of the machine ca.: 1,57 x 1,68 x 1,85 m<br/>digital readout in 3 axis: fagor <br/>sep. switch gear cabinet:  <br/>machine dealer with ownstock of 2500 m².<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> X-TRAVEL: 800 MM
Y-TRAVEL: 300 MM
Z-TRAVEL: 400 MM
SPINDLE TAPER: SK 40
QUILL STROKE: 100 MM
TURNING SPEED RANGE: 18: 40-2000 U/MIN
TABLE-SIZE: 1000 X 400 MM
FEED RANGE: 18: 10-500 MM/MIN
TOTAL POWER REQUIREMENT: 2,2 KW
WEIGHT OF THE MACHINE CA.: 2 T
DIMENSIONS OF THE MACHINE CA.: 1,57 X 1,68 X 1,85 M
DIGITAL READOUT IN 3 AXIS: FAGOR
SEP. SWITCH GEAR CABINET:
MACHINE DEALER WITH OWNSTOCK OF 2500 M².



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-
cnc controlled vertical machining center weeke optimat bhx055 
2014, like new condition, full function, still in operation 

management system and drive technology  
dust-protected linear guide system 
ballscrews in x -, y -, and z-direction 

digital drive system in x, y and z direction 
speed of the axis: vector speed x/y = 50 m / min, z = 15 m / min 

workpiece handling: 
for the feeding of the machine, the workpieces are positioned manually on a pneumatically controllable stop cylinder in the document area of the workpiece. removing of workpieces is done manually from the workpiece removal area or through the reversing function back from the document area of the workpiece. 
-1 stop cylinder workpiece positioning 
-1 workpiece clamping collet in x-direction of ball screws movable. the position of the collet in the longitudinal direction x will automatically programmatically. the clamp itself is set manually on the thickness measurement of the workpiece. the clamp stroke is 10 mm)

workpiece length of min. 200 mm 
workpiece length of max 3050 mm 
workpiece width of min. 70 mm 
workpiece width of 850 mm 
workpiece thickness of min. 12 mm (for surface processing), 
min. 12 mm (for horizontal arrangement of two lateral edges and on the upper level)
note: a central drilling is permitted only up to a thickness of 19 mm for the bottom horizontal drilling. 
max 60 mm 
workpiece weight of up to 35 kg 

workpiece document boar ich 
mechanical support by means of a roller conveyor for workpieces up to 1000 mm length. 
note: a corresponding safety area must be kept from the document pane. 

workpiece removal range
mechanical support by means of a roller conveyor for workpieces up to 1000 mm length. note: a corresponding safety area must be kept from the sampling area.

configuration 
processing unit in y - and z-direction of ball screws automatically travels including gearbox with individually retrievable spindles, as well as a workpiece counter location for the guidance of the workpiece during the machining and positioning. 
1 workpiece counter location with automatic workpiece thickness adjustment 

technical data 
workpiece thickness 8 mm minimum 
package extension of length bhx055
package consisting of 
vknr 0246 extension length to 3,050 mm incl. roller conveyor 
for workpieces with a maximum total length of up to 3,050 mm, the working range of the machine is enlarged by a software moderate extension of clamping pliers feature or an automatic umgreifen function of the collet. additional roles support enables the secure supply of long workpieces (up to 3,050 mm) to the machine. 
has the roller support from the fence an adjustment range from 1,200 to 1,850 mm and is easily removable. to a safe handling and a gripper of long work pieces on the bottom to ensure the rolls on approx. 100 mm are arranged. 

v13 high-speed gearbox 
incl. quick release system and spindle clamp 
vertical drilling unit (individually controllable with variable speed range). 
spindle clamp to secure achieving of the drilling depth. 
vorlegehub 
z-direction 60 mm 
drilling depth of 38 mm 
direction of rotation left / right 
the speed of 1,500 7,500 rpm, frequency controlled 
drive 2,3 kw 
drilling adapter d = 10 mm for quick change system 
drill bits total length 70 mm 
diameter of 35 mm 
spindle distance 32 mm 
spindle type individually controllable 

horiz. gearbox with 4 spindles x direction 
horizontal gearbox integrated in the basic machine drill head 
travel range: see assembly plan 

horiz. gearbox with 2 spindles y-direction
horizontal gearbox integrated in the basic machine drill head 
travel range: see assembly plan 

nutsã?ge d = 100 mm (x direction) 
nutsã¤ge integrated in the basic machine drill head 
wz diameter 100 mm 
blade thickness of 5 mm 
cutting cross-section: see technical documentation 

tool change spindles with converters, 5 kw 
(hsk63), and 3-tool change magazine 
automatic tool change spindles in combination with tool change magazine 
tool holder: hsk63
tool feed automatically 
direction of rotation left / right 
1,250 24,000 rpm 1/min, infinitely programmable 
drive: frequency-controlled three-phase motor 
max power tool up to 5 kw in continuous operation (s1-100%) 
spindle lubrication: grease permanently lubricated 
cooling: air 
extraction: central 

automatic tool change magazine with 3 positions 
magazine places: 3 tool stations 
wz record for hsk63 
wz diameter of 25 mm 
wz programming length of 80 mm 
tool change time: maximum of 16 seconds 

extension of the tool changing magazine 
bhx 055 to 1 space 
only in combination with vknr 1030 
wz record for hsk63 
wz diameter of 25 mm 
wz programming length of 80 mm 

energy saving function 
ecoplus button to standby mode, this can be activated during the processing. he does after the end of the program: 
drives appear powerless 
-if the machine is not produced, the control voltage by means of preset time is switched off 

control powercontrol pc85 
modern control system 
-providing tele-service net soft 
remote diagnosis possible 
-contouring in all axes and parallel processes through multi-channel technology. 
look-ahead function for optimal speeds at the crossing points 
-dynamic pilot control for accurate contour accuracy 

machine control 

1 x powercontrol software bhx 050/055 

1 x woodwop (single place license) 
-graphical, interactive cnc programming system 
-easily create variant programs by using variables 
-graphical tool selection 
-automatic cleaner suggestion 
-woodwop mosaic: woodwop file management software with graphic preview 
this software wood doo-wop can manage files and whole directories graphically 
-with drag- and -drop programs can be loaded / added 
-woodtype: software for creating milling programs for logos and texts in all available windows true type fonts 

requirements: pc with windows xp, vista, or windows 7 

location stuttgart area 
system can be seen still in operation, it can perform a trial run. 
immediately available. 
dismantling and loading on request. 

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

terms of payment: zuzã¼gl prices. used. vat, payment before picking up or shipping 

terms of delivery: from location close to stuttgart 

CNC CONTROLLED VERTICAL MACHINING CENTER WEEKE OPTIMAT BHX055 2014, LIKE NEW CONDITION, FULL FUNCTION, STILL IN OPERATION MANAGEMENT SYSTEM AND DRIVE TECHNOLOGY DUST-PROTECTED LINEAR GUIDE SYSTEM BALLSCREWS IN X -, Y -, AND Z-DIRECTION DIGITAL DRIVE SYSTEM IN X, Y AND Z DIRECTION SPEED OF THE AXIS: VECTOR SPEED X/Y = 50 M / MIN, Z = 15 M / MIN WORKPIECE HANDLING: FOR THE FEEDING OF THE MACHINE, THE WORKPIECES ARE POSITIONED MANUALLY ON A PNEUMATICALLY CONTROLLABLE STOP CYLINDER IN THE DOCUMENT AREA OF THE WORKPIECE. REMOVING OF WORKPIECES IS DONE MANUALLY FROM THE WORKPIECE REMOVAL AREA OR THROUGH THE REVERSING FUNCTION BACK FROM THE DOCUMENT AREA OF THE WORKPIECE. -1 STOP CYLINDER WORKPIECE POSITIONING -1 WORKPIECE CLAMPING COLLET IN X-DIRECTION OF BALL SCREWS MOVABLE. THE POSITION OF THE COLLET IN THE LONGITUDINAL DIRECTION X WILL AUTOMATICALLY PROGRAMMATICALLY. THE CLAMP ITSELF IS SET MANUALLY ON THE THICKNESS MEASUREMENT OF THE WORKPIECE. THE CLAMP STROKE IS 10 MM) WORKPIECE LENGTH OF MIN. 200 MM WORKPIECE LENGTH OF MAX 3050 MM WORKPIECE WIDTH OF MIN. 70 MM WORKPIECE WIDTH OF 850 MM WORKPIECE THICKNESS OF MIN. 12 MM (FOR SURFACE PROCESSING), MIN. 12 MM (FOR HORIZONTAL ARRANGEMENT OF TWO LATERAL EDGES AND ON THE UPPER LEVEL) NOTE: A CENTRAL DRILLING IS PERMITTED ONLY UP TO A THICKNESS OF 19 MM FOR THE BOTTOM HORIZONTAL DRILLING. MAX 60 MM WORKPIECE WEIGHT OF UP TO 35 KG WORKPIECE DOCUMENT BOAR ICH MECHANICAL SUPPORT BY MEANS OF A ROLLER CONVEYOR FOR WORKPIECES UP TO 1000 MM LENGTH. NOTE: A CORRESPONDING SAFETY AREA MUST BE KEPT FROM THE DOCUMENT PANE. WORKPIECE REMOVAL RANGE MECHANICAL SUPPORT BY MEANS OF A ROLLER CONVEYOR FOR WORKPIECES UP TO 1000 MM LENGTH. NOTE: A CORRESPONDING SAFETY AREA MUST BE KEPT FROM THE SAMPLING AREA. CONFIGURATION PROCESSING UNIT IN Y - AND Z-DIRECTION OF BALL SCREWS AUTOMATICALLY TRAVELS INCLUDING GEARBOX WITH INDIVIDUALLY RETRIEVABLE SPINDLES, AS WELL AS A WORKPIECE COUNTER LOCATION FOR THE GUIDANCE OF THE WORKPIECE DURING THE MACHINING AND POSITIONING. 1 WORKPIECE COUNTER LOCATION WITH AUTOMATIC WORKPIECE THICKNESS ADJUSTMENT TECHNICAL DATA WORKPIECE THICKNESS 8 MM MINIMUM PACKAGE EXTENSION OF LENGTH BHX055 PACKAGE CONSISTING OF VKNR 0246 EXTENSION LENGTH TO 3,050 MM INCL. ROLLER CONVEYOR FOR WORKPIECES WITH A MAXIMUM TOTAL LENGTH OF UP TO 3,050 MM, THE WORKING RANGE OF THE MACHINE IS ENLARGED BY A SOFTWARE MODERATE EXTENSION OF CLAMPING PLIERS FEATURE OR AN AUTOMATIC UMGREIFEN FUNCTION OF THE COLLET. ADDITIONAL ROLES SUPPORT ENABLES THE SECURE SUPPLY OF LONG WORKPIECES (UP TO 3,050 MM) TO THE MACHINE. HAS THE ROLLER SUPPORT FROM THE FENCE AN ADJUSTMENT RANGE FROM 1,200 TO 1,850 MM AND IS EASILY REMOVABLE. TO A SAFE HANDLING AND A GRIPPER OF LONG WORK PIECES ON THE BOTTOM TO ENSURE THE ROLLS ON APPROX. 100 MM ARE ARRANGED. V13 HIGH-SPEED GEARBOX INCL. QUICK RELEASE SYSTEM AND SPINDLE CLAMP VERTICAL DRILLING UNIT (INDIVIDUALLY CONTROLLABLE WITH VARIABLE SPEED RANGE). SPINDLE CLAMP TO SECURE ACHIEVING OF THE DRILLING DEPTH. VORLEGEHUB Z-DIRECTION 60 MM DRILLING DEPTH OF 38 MM DIRECTION OF ROTATION LEFT / RIGHT THE SPEED OF 1,500 7,500 RPM, FREQUENCY CONTROLLED DRIVE 2,3 KW DRILLING ADAPTER D = 10 MM FOR QUICK CHANGE SYSTEM DRILL BITS TOTAL LENGTH 70 MM DIAMETER OF 35 MM SPINDLE DISTANCE 32 MM SPINDLE TYPE INDIVIDUALLY CONTROLLABLE HORIZ. GEARBOX WITH 4 SPINDLES X DIRECTION HORIZONTAL GEARBOX INTEGRATED IN THE BASIC MACHINE DRILL HEAD TRAVEL RANGE: SEE ASSEMBLY PLAN HORIZ. GEARBOX WITH 2 SPINDLES Y-DIRECTION HORIZONTAL GEARBOX INTEGRATED IN THE BASIC MACHINE DRILL HEAD TRAVEL RANGE: SEE ASSEMBLY PLAN NUTS&ATILDE;?GE D = 100 MM (X DIRECTION) NUTS&ATILDE;&CURREN;GE INTEGRATED IN THE BASIC MACHINE DRILL HEAD WZ DIAMETER 100 MM BLADE THICKNESS OF 5 MM CUTTING CROSS-SECTION: SEE TECHNICAL DOCUMENTATION TOOL CHANGE SPINDLES WITH CONVERTERS, 5 KW (HSK63), AND 3-TOOL CHANGE MAGAZINE AUTOMATIC TOOL CHANGE SPINDLES IN COMBINATION WITH TOOL CHANGE MAGAZINE TOOL HOLDER: HSK63 TOOL FEED AUTOMATICALLY DIRECTION OF ROTATION LEFT / RIGHT 1,250 24,000 RPM 1/MIN, INFINITELY PROGRAMMABLE DRIVE: FREQUENCY-CONTROLLED THREE-PHASE MOTOR MAX POWER TOOL UP TO 5 KW IN CONTINUOUS OPERATION (S1-100%) SPINDLE LUBRICATION: GREASE PERMANENTLY LUBRICATED COOLING: AIR EXTRACTION: CENTRAL AUTOMATIC TOOL CHANGE MAGAZINE WITH 3 POSITIONS MAGAZINE PLACES: 3 TOOL STATIONS WZ RECORD FOR HSK63 WZ DIAMETER OF 25 MM WZ PROGRAMMING LENGTH OF 80 MM TOOL CHANGE TIME: MAXIMUM OF 16 SECONDS EXTENSION OF THE TOOL CHANGING MAGAZINE BHX 055 TO 1 SPACE ONLY IN COMBINATION WITH VKNR 1030 WZ RECORD FOR HSK63 WZ DIAMETER OF 25 MM WZ PROGRAMMING LENGTH OF 80 MM ENERGY SAVING FUNCTION ECOPLUS BUTTON TO STANDBY MODE, THIS CAN BE ACTIVATED DURING THE PROCESSING. HE DOES AFTER THE END OF THE PROGRAM: DRIVES APPEAR POWERLESS -IF THE MACHINE IS NOT PRODUCED, THE CONTROL VOLTAGE BY MEANS OF PRESET TIME IS SWITCHED OFF CONTROL POWERCONTROL PC85 MODERN CONTROL SYSTEM -PROVIDING TELE-SERVICE NET SOFT REMOTE DIAGNOSIS POSSIBLE -CONTOURING IN ALL AXES AND PARALLEL PROCESSES THROUGH MULTI-CHANNEL TECHNOLOGY. LOOK-AHEAD FUNCTION FOR OPTIMAL SPEEDS AT THE CROSSING POINTS -DYNAMIC PILOT CONTROL FOR ACCURATE CONTOUR ACCURACY MACHINE CONTROL 1 X POWERCONTROL SOFTWARE BHX 050/055 1 X WOODWOP (SINGLE PLACE LICENSE) -GRAPHICAL, INTERACTIVE CNC PROGRAMMING SYSTEM -EASILY CREATE VARIANT PROGRAMS BY USING VARIABLES -GRAPHICAL TOOL SELECTION -AUTOMATIC CLEANER SUGGESTION -WOODWOP MOSAIC: WOODWOP FILE MANAGEMENT SOFTWARE WITH GRAPHIC PREVIEW THIS SOFTWARE WOOD DOO-WOP CAN MANAGE FILES AND WHOLE DIRECTORIES GRAPHICALLY -WITH DRAG- AND -DROP PROGRAMS CAN BE LOADED / ADDED -WOODTYPE: SOFTWARE FOR CREATING MILLING PROGRAMS FOR LOGOS AND TEXTS IN ALL AVAILABLE WINDOWS TRUE TYPE FONTS REQUIREMENTS: PC WITH WINDOWS XP, VISTA, OR WINDOWS 7 LOCATION STUTTGART AREA SYSTEM CAN BE SEEN STILL IN OPERATION, IT CAN PERFORM A TRIAL RUN. IMMEDIATELY AVAILABLE. DISMANTLING AND LOADING ON REQUEST. HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE TERMS OF PAYMENT: ZUZ&ATILDE;&FRAC14;GL PRICES. USED. VAT, PAYMENT BEFORE PICKING UP OR SHIPPING TERMS OF DELIVERY: FROM LOCATION CLOSE TO STUTTGART
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 520 mm<br/>turning diameter over slide rest: 310 mm<br/>turning length: 1000 mm<br/>centre height: 255 mm<br/>spindle speeds:: 18 von 18-900 upm<br/>bed width: 403 mm<br/>spindle bore: 62 mm<br/>spindle head: din 55027/gr. 8 <br/>: 5,5 kw<br/>weight of the machine ca.: 2,6 t<br/>dimensions of the machine ca.: 3 x 1,1 x 1,3 m<br/>electric 380 volt:  <br/>chuck: forkardt f 250 <br/>multifix-steel holder  b : mit 3 wechselhaltern <br/>machine dealer with ownstock of 2500 m².<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> TURNING DIAMETER OVER BED: 520 MM
TURNING DIAMETER OVER SLIDE REST: 310 MM
TURNING LENGTH: 1000 MM
CENTRE HEIGHT: 255 MM
SPINDLE SPEEDS:: 18 VON 18-900 UPM
BED WIDTH: 403 MM
SPINDLE BORE: 62 MM
SPINDLE HEAD: DIN 55027/GR. 8
: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2,6 T
DIMENSIONS OF THE MACHINE CA.: 3 X 1,1 X 1,3 M
ELECTRIC 380 VOLT:
CHUCK: FORKARDT F 250
MULTIFIX-STEEL HOLDER B : MIT 3 WECHSELHALTERN
MACHINE DEALER WITH OWNSTOCK OF 2500 M².



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-wood chip heating nolting lcs rv 95/135

used, bj. 2010
135 kw
content v 880 l
control sutron bt 2
incl. automatic chip removal 

to the self-destruction
from site space ulm

technical data:

nolting furnaces lcs rv 95/135, which includes:
boiler lcs rv 95/135 according to din 4751
with integrated feed grate firing for the combustion of wood shavings, wood chips and other biomass of crushed.
three-pass tube boilers with a combustion train and two smoke tube trains.
steel boiler with inspection openings for the firebox and ash room
firebox lining made of heat-resistant refractory or fire concreting, pivoting revision and cleaning doors, generously dimensioned, insulated heating door with safety limit switches
combustion chamber with high-quality ceramic lining
firing socket with integrated feed grate firing.
the feed grate firing may well compensate for fuels with higher ash content and easy caking properties of the fuel.

ex duck drive for grate element movement, grate bars in high wear-resistant material quality with excellent thermal resistance properties.
the burned-out ashes falling from the rust in the channel of the ashes.

rated power: 135 kw
(depending on the fuel used and fuel moisture)

at increasing fuel humidity following benefits arising for the combustion plant:

% atroo % relative humidity performance 
20 15 135 kw
43 30 95 kw
82 45 85 kw

-maximum operating temperature/stb *: 90/100 â° c
* must be specified or 100/110 â° c
-max. operating pressure: 3.0 bar
-test pressure: 5,2 bar
-boiler weight: ca. 2135 kg

-dimensions:
-length: approx. 1925 mm (boiler without dust extractor)
-width: approx. 1020 mm (boiler)
-height: approx. 1760 mm (ok boiler)

accessories:
-set counter flanges on 65
-exhaust gas thermometer
-boiler thermometer
-schã¼r - and cleaning device

1 safety heat consumers
the safety heat exchanger is built directly into the boiler.
the flow pressure in the cold water pipe must be at least 2,0 bar.

a safety heat consumers is required according to din 4751.2 (closed systems). the required thermo valve, the thermal drain security must be on site (such as through the heating engineers).

1 rack unit
(insertion is performed from the back) consisting of:

-tray worm with gear motor auger with heat-resistant end
-dosing screw with gear motor and fuel template slot for better dosing of the quantity of fuel
-electrical back fire detectors
-thermostatic purge valve with water tank
-electrical fuel level monitoring in the shaft of the template
-additional thermostatic purge valve to the construction side connected directly to the water line
-rotary valves
gastight separation of fuel feeding steel rotor with 9 mm-thick fabric-reinforced rubber wings, powered by geared motor

1 dust collector lcs 133
multi cyclone dust collectors with single cyclones, cleaning, insulation and sheet metal panelling,

dust ton recording and dust bin, mounted suction draught fan with rotating body, balance wheel, motor with cooling disc, designed for thermal stress

1 electrical control and regulation system "lcr" with o2 control
in plc design with all necessary motor contactors and motor protection switches

data entry with clear, easy-to-use keypad, output on illuminated display

incl. device set:
-heated oxygen sensor
-vacuum switch
-temperature probe pt 100
-double thermostat
-waste gas thermostat

1 consumption-dependent power adjustment with vacuum control type "vala"

1 automatic ignition for combustion plant by hot air blower

1 exhaust gas recirculation included:
-partly insulated piping manifolds and flanges
-re circulation fan
-connector "piping"
-connecting piece "firing socket"
-electr. control "recirculation"

1 fire room temperature control to limit the temperature
in the hearth of the furnace base

scope of delivery:
-combustion chamber thermocouple
-control module

1 ash discharge screw "combustion chamber"
helical made of highly heat-resistant stainless steel
driven via worm gears ash support in separate ash container next to the boiler

1 ash "exchanger"
about wirbulatoren in the smoke pipes
the wirbulatoren promote the ashes forward into an ash collection box attached before the boiler.
from there, the ashes with an ash removal worm in a sideways next to the boiler tank is promoted.

1 exhaust pipe to the fireplace, d = 250 mm with arches and wall sleeve, approx. 2.5 m long without insulation

heavy equipment and machinery and equipment, without warranty.
technical data, year of manufacture and condition no warranty! bought as seen!
subject to prior sale

payment conditions: prices zuzã¼gl. used. vat, payment before picking up or shipping 

terms of delivery: from site

our general terms and conditions apply, see in the  WOOD CHIP HEATING NOLTING LCS RV 95/135 USED, BJ. 2010 135 KW CONTENT V 880 L CONTROL SUTRON BT 2 INCL. AUTOMATIC CHIP REMOVAL TO THE SELF-DESTRUCTION FROM SITE SPACE ULM TECHNICAL DATA: NOLTING FURNACES LCS RV 95/135, WHICH INCLUDES: BOILER LCS RV 95/135 ACCORDING TO DIN 4751 WITH INTEGRATED FEED GRATE FIRING FOR THE COMBUSTION OF WOOD SHAVINGS, WOOD CHIPS AND OTHER BIOMASS OF CRUSHED. THREE-PASS TUBE BOILERS WITH A COMBUSTION TRAIN AND TWO SMOKE TUBE TRAINS. STEEL BOILER WITH INSPECTION OPENINGS FOR THE FIREBOX AND ASH ROOM FIREBOX LINING MADE OF HEAT-RESISTANT REFRACTORY OR FIRE CONCRETING, PIVOTING REVISION AND CLEANING DOORS, GENEROUSLY DIMENSIONED, INSULATED HEATING DOOR WITH SAFETY LIMIT SWITCHES COMBUSTION CHAMBER WITH HIGH-QUALITY CERAMIC LINING FIRING SOCKET WITH INTEGRATED FEED GRATE FIRING. THE FEED GRATE FIRING MAY WELL COMPENSATE FOR FUELS WITH HIGHER ASH CONTENT AND EASY CAKING PROPERTIES OF THE FUEL. EX DUCK DRIVE FOR GRATE ELEMENT MOVEMENT, GRATE BARS IN HIGH WEAR-RESISTANT MATERIAL QUALITY WITH EXCELLENT THERMAL RESISTANCE PROPERTIES. THE BURNED-OUT ASHES FALLING FROM THE RUST IN THE CHANNEL OF THE ASHES. RATED POWER: 135 KW (DEPENDING ON THE FUEL USED AND FUEL MOISTURE) AT INCREASING FUEL HUMIDITY FOLLOWING BENEFITS ARISING FOR THE COMBUSTION PLANT: % ATROO % RELATIVE HUMIDITY PERFORMANCE 20 15 135 KW 43 30 95 KW 82 45 85 KW -MAXIMUM OPERATING TEMPERATURE/STB *: 90/100 &ACIRC;&DEG; C * MUST BE SPECIFIED OR 100/110 &ACIRC;&DEG; C -MAX. OPERATING PRESSURE: 3.0 BAR -TEST PRESSURE: 5,2 BAR -BOILER WEIGHT: CA. 2135 KG -DIMENSIONS: -LENGTH: APPROX. 1925 MM (BOILER WITHOUT DUST EXTRACTOR) -WIDTH: APPROX. 1020 MM (BOILER) -HEIGHT: APPROX. 1760 MM (OK BOILER) ACCESSORIES: -SET COUNTER FLANGES ON 65 -EXHAUST GAS THERMOMETER -BOILER THERMOMETER -SCH&ATILDE;&FRAC14;R - AND CLEANING DEVICE 1 SAFETY HEAT CONSUMERS THE SAFETY HEAT EXCHANGER IS BUILT DIRECTLY INTO THE BOILER. THE FLOW PRESSURE IN THE COLD WATER PIPE MUST BE AT LEAST 2,0 BAR. A SAFETY HEAT CONSUMERS IS REQUIRED ACCORDING TO DIN 4751.2 (CLOSED SYSTEMS). THE REQUIRED THERMO VALVE, THE THERMAL DRAIN SECURITY MUST BE ON SITE (SUCH AS THROUGH THE HEATING ENGINEERS). 1 RACK UNIT (INSERTION IS PERFORMED FROM THE BACK) CONSISTING OF: -TRAY WORM WITH GEAR MOTOR AUGER WITH HEAT-RESISTANT END -DOSING SCREW WITH GEAR MOTOR AND FUEL TEMPLATE SLOT FOR BETTER DOSING OF THE QUANTITY OF FUEL -ELECTRICAL BACK FIRE DETECTORS -THERMOSTATIC PURGE VALVE WITH WATER TANK -ELECTRICAL FUEL LEVEL MONITORING IN THE SHAFT OF THE TEMPLATE -ADDITIONAL THERMOSTATIC PURGE VALVE TO THE CONSTRUCTION SIDE CONNECTED DIRECTLY TO THE WATER LINE -ROTARY VALVES GASTIGHT SEPARATION OF FUEL FEEDING STEEL ROTOR WITH 9 MM-THICK FABRIC-REINFORCED RUBBER WINGS, POWERED BY GEARED MOTOR 1 DUST COLLECTOR LCS 133 MULTI CYCLONE DUST COLLECTORS WITH SINGLE CYCLONES, CLEANING, INSULATION AND SHEET METAL PANELLING, DUST TON RECORDING AND DUST BIN, MOUNTED SUCTION DRAUGHT FAN WITH ROTATING BODY, BALANCE WHEEL, MOTOR WITH COOLING DISC, DESIGNED FOR THERMAL STRESS 1 ELECTRICAL CONTROL AND REGULATION SYSTEM "LCR" WITH O2 CONTROL IN PLC DESIGN WITH ALL NECESSARY MOTOR CONTACTORS AND MOTOR PROTECTION SWITCHES DATA ENTRY WITH CLEAR, EASY-TO-USE KEYPAD, OUTPUT ON ILLUMINATED DISPLAY INCL. DEVICE SET: -HEATED OXYGEN SENSOR -VACUUM SWITCH -TEMPERATURE PROBE PT 100 -DOUBLE THERMOSTAT -WASTE GAS THERMOSTAT 1 CONSUMPTION-DEPENDENT POWER ADJUSTMENT WITH VACUUM CONTROL TYPE "VALA" 1 AUTOMATIC IGNITION FOR COMBUSTION PLANT BY HOT AIR BLOWER 1 EXHAUST GAS RECIRCULATION INCLUDED: -PARTLY INSULATED PIPING MANIFOLDS AND FLANGES -RE CIRCULATION FAN -CONNECTOR "PIPING" -CONNECTING PIECE "FIRING SOCKET" -ELECTR. CONTROL "RECIRCULATION" 1 FIRE ROOM TEMPERATURE CONTROL TO LIMIT THE TEMPERATURE IN THE HEARTH OF THE FURNACE BASE SCOPE OF DELIVERY: -COMBUSTION CHAMBER THERMOCOUPLE -CONTROL MODULE 1 ASH DISCHARGE SCREW "COMBUSTION CHAMBER" HELICAL MADE OF HIGHLY HEAT-RESISTANT STAINLESS STEEL DRIVEN VIA WORM GEARS ASH SUPPORT IN SEPARATE ASH CONTAINER NEXT TO THE BOILER 1 ASH "EXCHANGER" ABOUT WIRBULATOREN IN THE SMOKE PIPES THE WIRBULATOREN PROMOTE THE ASHES FORWARD INTO AN ASH COLLECTION BOX ATTACHED BEFORE THE BOILER. FROM THERE, THE ASHES WITH AN ASH REMOVAL WORM IN A SIDEWAYS NEXT TO THE BOILER TANK IS PROMOTED. 1 EXHAUST PIPE TO THE FIREPLACE, D = 250 MM WITH ARCHES AND WALL SLEEVE, APPROX. 2.5 M LONG WITHOUT INSULATION HEAVY EQUIPMENT AND MACHINERY AND EQUIPMENT, WITHOUT WARRANTY. TECHNICAL DATA, YEAR OF MANUFACTURE AND CONDITION NO WARRANTY! BOUGHT AS SEEN! SUBJECT TO PRIOR SALE PAYMENT CONDITIONS: PRICES ZUZ&ATILDE;&FRAC14;GL. USED. VAT, PAYMENT BEFORE PICKING UP OR SHIPPING TERMS OF DELIVERY: FROM SITE OUR GENERAL TERMS AND CONDITIONS APPLY, SEE IN THE
Vendedor: Kauz Maschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-arm length: 2000 mm<br/>workpiece height max.: 1500 mm<br/>turning speeds: 28-1250 u/min<br/>feed: 0,1-1,12 mm/u<br/>spindle diameter: 80 mm<br/>surface area: 1800x1100 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> ARM LENGTH: 2000 MM
WORKPIECE HEIGHT MAX.: 1500 MM
TURNING SPEEDS: 28-1250 U/MIN
FEED: 0,1-1,12 MM/U
SPINDLE DIAMETER: 80 MM
SURFACE AREA: 1800X1100 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M



THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 3.200 €
Ubicación: Land-code: 0601
brand: kuper
model: fw /j 920 - ce standard

thread splicer for veneer - ce standard

reach  mm 1920
veneer thickness  0,4 - 2 mm
feed speed  15 mt/min 
power  0,5  kw
overall dimensions: mm 1250 x 580 x 1470 h
weight kg 320



 CODE: 0601 BRAND: KUPER MODEL: FW /J 920 - CE STANDARD THREAD SPLICER FOR VENEER - CE STANDARD REACH MM 1920 VENEER THICKNESS 0,4 - 2 MM FEED SPEED 15 MT/MIN POWER 0,5 KW OVERALL DIMENSIONS: MM 1250 X 580 X 1470 H WEIGHT KG 320
Vendedor: TOMESANI Srl
Año de construcción: usado
Precio: 11.230 €
Ubicación: Land-: 3.370 x 27 x 0,9 mm<br/>: 940 mm<br/>: 1,5/1,8 kw<br/>: 1.750 x 1.480 x 1.900 mm<br/>: 649 kg<br/>hydraulic vice with adjustable guides<br/>steel sawframe<br/>adjustable blade tension<br/>suitable for cutting steel and cast iron<br/>position sensor automatically detects start-cut point<br/>adjustable bar stop<br/>blade-cleaning brush<br/>removable chip collector<br/>coolant tank<br/><br/><br/><br/><br/><br/>cutting capacity:<br/>90°: round 305 mm <br/> square 250 mm <br/> rectangular 350 x 200 mm<br/>45° right: round 250 mm <br/> square 230 mm <br/> rectangular 230 x 200 mm<br/>45° left: round 250 mm <br/> square 230 mm <br/> rectangular 230 x 200 mm<br/>60° left: round 175 mm <br/> square 155 mm <br/> rectangular 170 x 100 mm<br/>blade dimension: 3.370 x 27 x 0,9 mm<br/>speed: 37/74 m/min<br/>working height: 940 mm<br/>motor: 1,5/1,8 kw<br/>dimensions: 1.750 x 1.480 x 1.900 mm<br/>weight: 649 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.370 X 27 X 0,9 MM
: 940 MM
: 1,5/1,8 KW
: 1.750 X 1.480 X 1.900 MM
: 649 KG
HYDRAULIC VICE WITH ADJUSTABLE GUIDES
STEEL SAWFRAME
ADJUSTABLE BLADE TENSION
SUITABLE FOR CUTTING STEEL AND CAST IRON
POSITION SENSOR AUTOMATICALLY DETECTS START-CUT POINT
ADJUSTABLE BAR STOP
BLADE-CLEANING BRUSH
REMOVABLE CHIP COLLECTOR
COOLANT TANK





CUTTING CAPACITY:
90°: ROUND 305 MM
SQUARE 250 MM
RECTANGULAR 350 X 200 MM
45° RIGHT: ROUND 250 MM
SQUARE 230 MM
RECTANGULAR 230 X 200 MM
45° LEFT: ROUND 250 MM
SQUARE 230 MM
RECTANGULAR 230 X 200 MM
60° LEFT: ROUND 175 MM
SQUARE 155 MM
RECTANGULAR 170 X 100 MM
BLADE DIMENSION: 3.370 X 27 X 0,9 MM
SPEED: 37/74 M/MIN
WORKING HEIGHT: 940 MM
MOTOR: 1,5/1,8 KW
DIMENSIONS: 1.750 X 1.480 X 1.900 MM
WEIGHT: 649 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-krauss maffei km 110-380 cx
year of construction: 2008

injection unit:
screw diameter: 35 mm
shot weight: 140 g
injection pressure: 2500 bar
dosing volume: 154 ccm

clamping unit:
clamping force: 110 t
tie bar distance: 470 x 470 mm
size of the clamping plates: 745 x 770 mm
ejector: hydraulic
clamping unit: hydraulic

control: mc v - touch control panel

additional equipment:
high machine
air valve x 1
hot channel control
hardened spritzaggragt - bimetal
battery - powered with nitrogen (bottle with nitrogen - to quick work)
parallel movements

dimensions:
weight: 7800 kg
length/width/height: 5.30 x 1.60 x 2.05 m

drive:
pump/motor: 18.5 kw

price: on request
KRAUSS MAFFEI KM 110-380 CX YEAR OF CONSTRUCTION: 2008 INJECTION UNIT: SCREW DIAMETER: 35 MM SHOT WEIGHT: 140 G INJECTION PRESSURE: 2500 BAR DOSING VOLUME: 154 CCM CLAMPING UNIT: CLAMPING FORCE: 110 T TIE BAR DISTANCE: 470 X 470 MM SIZE OF THE CLAMPING PLATES: 745 X 770 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: MC V - TOUCH CONTROL PANEL ADDITIONAL EQUIPMENT: HIGH MACHINE AIR VALVE X 1 HOT CHANNEL CONTROL HARDENED SPRITZAGGRAGT - BIMETAL BATTERY - POWERED WITH NITROGEN (BOTTLE WITH NITROGEN - TO QUICK WORK) PARALLEL MOVEMENTS DIMENSIONS: WEIGHT: 7800 KG LENGTH/WIDTH/HEIGHT: 5.30 X 1.60 X 2.05 M DRIVE: PUMP/MOTOR: 18.5 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 59.130 €
Ubicación: Land-: 3.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 2.600 mm<br/>: 265 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 11.500 kg<br/>4 axes (y1, y2, x, r) <br/>cnc dt-15<br/>- 2d grafic display 15",<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/>   cnc cybelec modeva 19t â?¬ 5.750,--   cnc controlled r-axis included   quick connecting terminals for the upper tool â?¬ 690,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 620 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 175 to<br/>axis: 4 (y1, y2, x, r)<br/>upper tool: yes<br/>lower tool: yes<br/>anti deflection: ja<br/>back gauge: cnc conrolled<br/>motor power: 18,5 kw<br/>distance between columns: 2.600 mm<br/>stroke: 265 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.700 mm<br/>height: 2.750 mm<br/>weight: 11.500 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.050 MM
: 175 TO
: 18,5 KW
: 2.600 MM
: 265 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.700 MM
: 2.750 MM
: 11.500 KG
4 AXES (Y1, Y2, X, R) 
CNC DT-15
- 2D GRAFIC DISPLAY 15",
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:

CNC CYBELEC MODEVA 19T â?¬ 5.750,-- CNC CONTROLLED R-AXIS INCLUDED QUICK CONNECTING TERMINALS FOR THE UPPER TOOL â?¬ 690,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 620 REFERENCES!






BENDING LENGTH: 3.050 MM
BENDING FORCE: 175 TO
AXIS: 4 (Y1, Y2, X, R)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: JA
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 18,5 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
STROKE: 265 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: 11.500 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-krauss maffei km 110-520 c2
year of construction: 2001

injection unit:
screw diameter: 45 mm
shot weight: 250 g
injection pressure: 1878 bar
metering capacity: 275 cc

clamping unit:
clamping force: 110 t
tie bar distance: 470 x 470 mm
size of the clamping plates: 745 x 770 mm
ejector: hydraulic
clamping unit: hydraulic

control: mc iv

additional equipment:
euromap 12
robot interface
hydraulic core pulling x 2
air valve x 3
control hot-channel x 12
injection unit cured - bi
sensor of kistler - pressure control in the tool
battery - powered with nitrogen (bottle with nitrogen - to quick work)
proportional valve on the injection unit - precise injection
parallel movements

dimensions:
weight: 6000 kg
length/width/height: 4.48 x 1.51 x 2.19 m

drive:
pump/motor: 22 kw
heating power: 13 kw
total capacity: 35 kw

price: on request KRAUSS MAFFEI KM 110-520 C2 YEAR OF CONSTRUCTION: 2001 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 250 G INJECTION PRESSURE: 1878 BAR METERING CAPACITY: 275 CC CLAMPING UNIT: CLAMPING FORCE: 110 T TIE BAR DISTANCE: 470 X 470 MM SIZE OF THE CLAMPING PLATES: 745 X 770 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: MC IV ADDITIONAL EQUIPMENT: EUROMAP 12 ROBOT INTERFACE HYDRAULIC CORE PULLING X 2 AIR VALVE X 3 CONTROL HOT-CHANNEL X 12 INJECTION UNIT CURED - BI SENSOR OF KISTLER - PRESSURE CONTROL IN THE TOOL BATTERY - POWERED WITH NITROGEN (BOTTLE WITH NITROGEN - TO QUICK WORK) PROPORTIONAL VALVE ON THE INJECTION UNIT - PRECISE INJECTION PARALLEL MOVEMENTS DIMENSIONS: WEIGHT: 6000 KG LENGTH/WIDTH/HEIGHT: 4.48 X 1.51 X 2.19 M DRIVE: PUMP/MOTOR: 22 KW HEATING POWER: 13 KW TOTAL CAPACITY: 35 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 12.200 €
Ubicación: Land-: 80x40x3 mm<br/>: 60x60x4 mm<br/>: 60 mm<br/>: 177 mm<br/>: 3,7 kw<br/>: 6 upm<br/>: 1.160 mm<br/>: 1.000 mm<br/>: 1.175 mm<br/>: 1.194 kg<br/>3 driven rolls <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions on seperate control panel <br/>plane and hardened universal rolls <br/>lateral rolls adjustable in 3 axes manual/hydr. <br/>horizontal and vertical operation <br/>for- and backward drive <br/>machine and equipment according to the ce regulations <br/>user manual in german and english <br/><br/>we have more than 235 references!<br/><br/><br/><br/><br/>performances <br/>flat steel vertical position: 70x10 mm / 600 mm, 30x10 mm / 250 mm<br/>flat steel horizontal position: 90x25 mm / 500 mm, 50x5 mm / 250 mm<br/>square bar: 40x40 mm / 500 mm, 20x20 mm / 300 mm<br/>round bar: Ã?. 40 mm / 500 mm, Ã? 20 mm / 300 mm<br/>tube: Ã? 60x2 mm / 600 mm, Ã? 20x1 / 250 mm<br/>form tube vertical position: 80x40x3 mm<br/>form tube square: 60x60x4 mm<br/>angle leg outside: 50x5 mm / 1.000 mm, 30x4 mm / 350 mm<br/>angle leg inside: 50x5 mm / 500 mm, 30x3 mm / 250 mm<br/>shaft diameter: 60 mm <br/>roll diameter: 177 mm <br/>driven roll: 3 <br/>motor power: 3,7 kw <br/>speed: 6 rpm <br/>length: 1.160 mm <br/>width: 1.000 mm <br/>heigth: 1.175 mm<br/>weight: 1.194 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 80X40X3 MM
: 60X60X4 MM
: 60 MM
: 177 MM
: 3,7 KW
: 6 UPM
: 1.160 MM
: 1.000 MM
: 1.175 MM
: 1.194 KG
3 DRIVEN ROLLS 
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS ON SEPERATE CONTROL PANEL 
PLANE AND HARDENED UNIVERSAL ROLLS 
LATERAL ROLLS ADJUSTABLE IN 3 AXES MANUAL/HYDR. 
HORIZONTAL AND VERTICAL OPERATION 
FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS 
USER MANUAL IN GERMAN AND ENGLISH

WE HAVE MORE THAN 235 REFERENCES!




PERFORMANCES
FLAT STEEL VERTICAL POSITION: 70X10 MM / 600 MM, 30X10 MM / 250 MM
FLAT STEEL HORIZONTAL POSITION: 90X25 MM / 500 MM, 50X5 MM / 250 MM
SQUARE BAR: 40X40 MM / 500 MM, 20X20 MM / 300 MM
ROUND BAR: Ã?. 40 MM / 500 MM, Ã? 20 MM / 300 MM
TUBE: Ã? 60X2 MM / 600 MM, Ã? 20X1 / 250 MM
FORM TUBE VERTICAL POSITION: 80X40X3 MM
FORM TUBE SQUARE: 60X60X4 MM
ANGLE LEG OUTSIDE: 50X5 MM / 1.000 MM, 30X4 MM / 350 MM
ANGLE LEG INSIDE: 50X5 MM / 500 MM, 30X3 MM / 250 MM
SHAFT DIAMETER: 60 MM
ROLL DIAMETER: 177 MM
DRIVEN ROLL: 3
MOTOR POWER: 3,7 KW
SPEED: 6 RPM
LENGTH: 1.160 MM
WIDTH: 1.000 MM
HEIGTH: 1.175 MM
WEIGHT: 1.194 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-krauss maffei km 125-520 c2
year of construction: 1999

injection unit:
screw diameter: 45 mm
shot weight: 250 g
injection pressure: 1878 bar
metering capacity: 275 cc

clamping unit:
clamping force: 125 t
tie bar distance: 470 x 470 mm
size of the clamping plates: 745 x 770 mm
ejector: hydraulic
clamping unit: hydraulic

control: mc iv

additional equipment:
euromap
robot interface
core move x 1
air valve x 2
injection unit made of bimetal
parallel movements
machine with battery for fast work

dimensions:
weight: 6000 kg
length/width/height: 4.48 x 1.51 x 2.19 m

drive:
pump/motor: 18.5 kw
heating power: 13 kw
cylinder heating: 31.5 kw

price: on request KRAUSS MAFFEI KM 125-520 C2 YEAR OF CONSTRUCTION: 1999 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 250 G INJECTION PRESSURE: 1878 BAR METERING CAPACITY: 275 CC CLAMPING UNIT: CLAMPING FORCE: 125 T TIE BAR DISTANCE: 470 X 470 MM SIZE OF THE CLAMPING PLATES: 745 X 770 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: MC IV ADDITIONAL EQUIPMENT: EUROMAP ROBOT INTERFACE CORE MOVE X 1 AIR VALVE X 2 INJECTION UNIT MADE OF BIMETAL PARALLEL MOVEMENTS MACHINE WITH BATTERY FOR FAST WORK DIMENSIONS: WEIGHT: 6000 KG LENGTH/WIDTH/HEIGHT: 4.48 X 1.51 X 2.19 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING POWER: 13 KW CYLINDER HEATING: 31.5 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Precio: 79.000 €
Ubicación: Land-: 180x70x8 mm<br/>: 120x120x8 mm<br/>: 180-160 mm<br/>: 460 mm<br/>: 30 kw<br/>: 2.500 mm<br/>: 2.000 mm<br/>: 1.900 mm<br/>: 8.600 kg<br/>3 driven rolls (hydromotor and planetary gear) <br/>strong welded steel construction <br/>lower rolls hydr. adjustable <br/>digital read-out for lower rolls positions<br/>plane rolls <br/>lateral rolls (forward-backward hydraulic, rest manual)<br/>horizontal and vertical operation <br/>double foot pedal for- and backward drive <br/> machine and equipment according to the ce regulations<br/><br/>we have more than 235 references!<br/><br/>(sample photo shows mod. pbh 125)<br/><br/><br/>performances:	<br/>flat steel vertical position: 150x30 mm / 1.000 mm<br/>flat steel horizontal position: 250x40 mm / 1.000 mm<br/>square bar: 90x90 mm / 1.300 mm<br/>round bar: Ã? 100 mm / 1.000 mm<br/>tube: Ã? 170x6 mm / 2.800 mm<br/>form tube vertical position: 180x70x8 mm<br/>form tube square: 120x120x8 mm<br/>angle leg outside: 130x15 mm / 1.400 mm<br/>angle leg inside: 150x15 mm / 1.200 mm<br/>shaft diameter: 180-160 mm<br/>roll diameter: 460 mm<br/>driven rolls: 3<br/>motor power: 30 kw<br/>length: 2.500 mm<br/>width: 2.000 mm<br/>heigth: 1.900 mm<br/>weight: 8.600 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 180X70X8 MM
: 120X120X8 MM
: 180-160 MM
: 460 MM
: 30 KW
: 2.500 MM
: 2.000 MM
: 1.900 MM
: 8.600 KG
3 DRIVEN ROLLS (HYDROMOTOR AND PLANETARY GEAR)
STRONG WELDED STEEL CONSTRUCTION 
LOWER ROLLS HYDR. ADJUSTABLE 
DIGITAL READ-OUT FOR LOWER ROLLS POSITIONS
PLANE ROLLS 
LATERAL ROLLS (FORWARD-BACKWARD HYDRAULIC, REST MANUAL)
HORIZONTAL AND VERTICAL OPERATION 
DOUBLE FOOT PEDAL FOR- AND BACKWARD DRIVE 
MACHINE AND EQUIPMENT ACCORDING TO THE CE REGULATIONS

WE HAVE MORE THAN 235 REFERENCES!

(SAMPLE PHOTO SHOWS MOD. PBH 125)


PERFORMANCES:
FLAT STEEL VERTICAL POSITION: 150X30 MM / 1.000 MM
FLAT STEEL HORIZONTAL POSITION: 250X40 MM / 1.000 MM
SQUARE BAR: 90X90 MM / 1.300 MM
ROUND BAR: Ã? 100 MM / 1.000 MM
TUBE: Ã? 170X6 MM / 2.800 MM
FORM TUBE VERTICAL POSITION: 180X70X8 MM
FORM TUBE SQUARE: 120X120X8 MM
ANGLE LEG OUTSIDE: 130X15 MM / 1.400 MM
ANGLE LEG INSIDE: 150X15 MM / 1.200 MM
SHAFT DIAMETER: 180-160 MM
ROLL DIAMETER: 460 MM
DRIVEN ROLLS: 3
MOTOR POWER: 30 KW
LENGTH: 2.500 MM
WIDTH: 2.000 MM
HEIGTH: 1.900 MM
WEIGHT: 8.600 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-krauss maffei km 125-520 c2
year of construction: 2002

injection unit:
screw diameter: 45 mm
shot weight: 250 g
injection pressure: 1878 bar
metering capacity: 275 cc

clamping unit:
clamping force: 125 t
tie bar distance: 470 x 470 mm
size of the clamping plates: 745 x 770 mm
ejector: hydraulic
clamping unit: hydraulic

control: mc iv

additional equipment:
air valve x 1
parallel movements
proportional valve on the injection unit - precise injection
machine is equipped with battery (nitrogen bottle) - charging with nitrogen, which is used for the fast work

dimensions:
weight: 6000 kg
length/width/height: 4.48 x 1.51 x 2.19 m

drive:
pump/motor: 18.5 kw
heating power: 13 kw
total power: 31.5 kw

price: on request KRAUSS MAFFEI KM 125-520 C2 YEAR OF CONSTRUCTION: 2002 INJECTION UNIT: SCREW DIAMETER: 45 MM SHOT WEIGHT: 250 G INJECTION PRESSURE: 1878 BAR METERING CAPACITY: 275 CC CLAMPING UNIT: CLAMPING FORCE: 125 T TIE BAR DISTANCE: 470 X 470 MM SIZE OF THE CLAMPING PLATES: 745 X 770 MM EJECTOR: HYDRAULIC CLAMPING UNIT: HYDRAULIC CONTROL: MC IV ADDITIONAL EQUIPMENT: AIR VALVE X 1 PARALLEL MOVEMENTS PROPORTIONAL VALVE ON THE INJECTION UNIT - PRECISE INJECTION MACHINE IS EQUIPPED WITH BATTERY (NITROGEN BOTTLE) - CHARGING WITH NITROGEN, WHICH IS USED FOR THE FAST WORK DIMENSIONS: WEIGHT: 6000 KG LENGTH/WIDTH/HEIGHT: 4.48 X 1.51 X 2.19 M DRIVE: PUMP/MOTOR: 18.5 KW HEATING POWER: 13 KW TOTAL POWER: 31.5 KW PRICE: ON REQUEST
Vendedor: Szczep-pol s.c.
Año de construcción: usado
Ubicación: Land-: 30 mm<br/>: -25 m<br/>: 3 mk<br/>: 250 mm<br/>: 120 mm<br/>: 35 - 365 mm<br/>: 100 mm<br/>: 430 x 240 mm<br/>: 1,1 / 1,4 kw<br/>: 1.000 mm<br/>: 600 mm<br/>: 1.450 mm<br/>: 240 kg<br/>erlo  (made in spain)<br/><br/>for demanding workshop use<br/><br/>manual feed<br/>geared drive<br/>fixed table with t-slots and displaceable headstock<br/>cross table<br/>frontal wheel<br/>lighting equipment<br/>drill guard<br/><br/>drilling capacity: 30 mm<br/>tapping capacity: m-25<br/>spindle cone: mk 3<br/>gap: 250 mm<br/>speed range: 65- 3.060 rpm (8) 50 hz <br/> 78 - 3.672 rpm (8) 60 hz<br/>spindle stroke: 120 mm<br/>distance spindle-table: 35 - 365 mm<br/>column diameter: 100 mm<br/>table dimensions: 430 x 240 mm<br/>motor speed: 1.500 - 3.000 rpm<br/>motor: 1,1 / 1,4 kw<br/>length: 1.000 mm<br/>width: 600 mm<br/>height: 1.450 mm<br/>weight: 240 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 30 MM
: -25 M
: 3 MK
: 250 MM
: 120 MM
: 35 - 365 MM
: 100 MM
: 430 X 240 MM
: 1,1 / 1,4 KW
: 1.000 MM
: 600 MM
: 1.450 MM
: 240 KG
ERLO  (MADE IN SPAIN)

FOR DEMANDING WORKSHOP USE

MANUAL FEED
GEARED DRIVE
FIXED TABLE WITH T-SLOTS AND DISPLACEABLE HEADSTOCK
CROSS TABLE
FRONTAL WHEEL
LIGHTING EQUIPMENT
DRILL GUARD

DRILLING CAPACITY: 30 MM
TAPPING CAPACITY: M-25
SPINDLE CONE: MK 3
GAP: 250 MM
SPEED RANGE: 65- 3.060 RPM (8) 50 HZ
78 - 3.672 RPM (8) 60 HZ
SPINDLE STROKE: 120 MM
DISTANCE SPINDLE-TABLE: 35 - 365 MM
COLUMN DIAMETER: 100 MM
TABLE DIMENSIONS: 430 X 240 MM
MOTOR SPEED: 1.500 - 3.000 RPM
MOTOR: 1,1 / 1,4 KW
LENGTH: 1.000 MM
WIDTH: 600 MM
HEIGHT: 1.450 MM
WEIGHT: 240 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-
manufacturer: gildemeister                   
type: ctx 620 linear v3
year of construction: 2004	
control: siemens 840 d 
swing above bed: 800 mm
swing a.s.l. cross slide: 500 mm 	    
plan travel: 382 mm
longitudinal travel: 2100 mm
power: 40% / 100% 43/33 kw 
speed range from - until: 20-2500 rpm	
three-jaw chuck smw 315 mm
facilities
axles: 3	
tool carrier: 12 stations vdi 50 
it powered: 12 stations part hollow clamping device:			    
tailstock: yes
automatic quill stroke: 150 mm
quill recording: mk 5
chip conveyor: yes
dimensions: l x w x h 5500 x 2850 x 2275 
weight: ca. 12 800 kg incl. chip conveyor.

very good condition. 

immediately available.
 MANUFACTURER: GILDEMEISTER TYPE: CTX 620 LINEAR V3 YEAR OF CONSTRUCTION: 2004 CONTROL: SIEMENS 840 D SWING ABOVE BED: 800 MM SWING A.S.L. CROSS SLIDE: 500 MM PLAN TRAVEL: 382 MM LONGITUDINAL TRAVEL: 2100 MM POWER: 40% / 100% 43/33 KW SPEED RANGE FROM - UNTIL: 20-2500 RPM THREE-JAW CHUCK SMW 315 MM FACILITIES AXLES: 3 TOOL CARRIER: 12 STATIONS VDI 50 IT POWERED: 12 STATIONS PART HOLLOW CLAMPING DEVICE: TAILSTOCK: YES AUTOMATIC QUILL STROKE: 150 MM QUILL RECORDING: MK 5 CHIP CONVEYOR: YES DIMENSIONS: L X W X H 5500 X 2850 X 2275 WEIGHT: CA. 12 800 KG INCL. CHIP CONVEYOR. VERY GOOD CONDITION. IMMEDIATELY AVAILABLE.
Vendedor: Spantech GmbH
Año de construcción: usado
Ubicación: Land-: 18 mm<br/>: -14 m<br/>: 3 mk<br/>: 250 mm<br/>: 120 mm<br/>: 200 - 620 mm<br/>: 100 mm<br/>: 520 x 390 mm<br/>: 400 kg<br/>erlo  (made in spain)<br/><br/>for demanding workshop use<br/><br/>manual feed<br/>10 speeds<br/>fixed table and displaceable headstock<br/>lighting equipment<br/>coolant equipment<br/>drill guard<br/><br/>drilling capacity: 18 mm<br/>tapping capacity: m-14<br/>spindle cone: mk 3<br/>gap: 250 mm<br/>speed range: 245 - 4.000 rpm (10) 50 hz <br/> 295 - 4.800 rpm (10) 60 hz<br/>spindle stroke: 120 mm<br/>distance spindle-table: 200 - 620 mm<br/>column diameter: 100 mm<br/>table dimensions: 520 x 390 mm<br/>motor speed: 750 - 1.500 rpm<br/>motor: 0,5 / 0,9 kw<br/>weight: 400 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 18 MM
: -14 M
: 3 MK
: 250 MM
: 120 MM
: 200 - 620 MM
: 100 MM
: 520 X 390 MM
: 400 KG
ERLO  (MADE IN SPAIN)

FOR DEMANDING WORKSHOP USE

MANUAL FEED
10 SPEEDS
FIXED TABLE AND DISPLACEABLE HEADSTOCK
LIGHTING EQUIPMENT
COOLANT EQUIPMENT
DRILL GUARD

DRILLING CAPACITY: 18 MM
TAPPING CAPACITY: M-14
SPINDLE CONE: MK 3
GAP: 250 MM
SPEED RANGE: 245 - 4.000 RPM (10) 50 HZ
295 - 4.800 RPM (10) 60 HZ
SPINDLE STROKE: 120 MM
DISTANCE SPINDLE-TABLE: 200 - 620 MM
COLUMN DIAMETER: 100 MM
TABLE DIMENSIONS: 520 X 390 MM
MOTOR SPEED: 750 - 1.500 RPM
MOTOR: 0,5 / 0,9 KW
WEIGHT: 400 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-schenck vibrating machine with frame, spring,
vibromotors: 1.7 kw
working length: l = 2500 mm
working width: w = 400 mm
total height: h = 1300 mm.
 SCHENCK VIBRATING MACHINE WITH FRAME, SPRING, VIBROMOTORS: 1.7 KW WORKING LENGTH: L = 2500 MM WORKING WIDTH: W = 400 MM TOTAL HEIGHT: H = 1300 MM.
Vendedor: Recotech Recyclingmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 1.433 €
Ubicación: Land-: 3.000 mm<br/>: 350 mm<br/>: 60 x 2 mm<br/>: 15 mm<br/>: 2.550 mm<br/>: 820 - 940 mm<br/>: 250 mm<br/>: 900 kg<br/>: 200 kg<br/>supply- and removal roller table<br/>with lateral guidance<br/><br/>further lengths:<br/><br/><br/>   2 meter  â?¬ 1.029,-   4 meter  â?¬ 1.663,-   6 meter  â?¬ 2.521,-   <br/><br/>further lengths and roll widths on reques.<br/><br/>(sample photo)<br/><br/><br/><br/>length: 3.000 mm<br/>width of rolls: 350 mm<br/>diameter of rolls: 60 x 2 mm<br/>axes diameter: 15 mm<br/>number of rolls:	12<br/>max. gauge length: 2.550 mm<br/>working height: 820 - 940 mm<br/>roll gapping: 250 mm<br/>max. load:	900 kg<br/>weight: 200 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.000 MM
: 350 MM
: 60 X 2 MM
: 15 MM
: 2.550 MM
: 820 - 940 MM
: 250 MM
: 900 KG
: 200 KG
SUPPLY- AND REMOVAL ROLLER TABLE
WITH LATERAL GUIDANCE

FURTHER LENGTHS:


2 METER  � 1.029,- 4 METER  � 1.663,- 6 METER  � 2.521,-

FURTHER LENGTHS AND ROLL WIDTHS ON REQUES.

(SAMPLE PHOTO)



LENGTH: 3.000 MM
WIDTH OF ROLLS: 350 MM
DIAMETER OF ROLLS: 60 X 2 MM
AXES DIAMETER: 15 MM
NUMBER OF ROLLS: 12
MAX. GAUGE LENGTH: 2.550 MM
WORKING HEIGHT: 820 - 940 MM
ROLL GAPPING: 250 MM
MAX. LOAD: 900 KG
WEIGHT: 200 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-fe-separator, parent band magnet, permanent magnet with new rubber strap, drive, drive and idler pulleys.
overall dimensions with gear lxwxh: 2125 x 1500 x 690 mm
rubber belt width: 1000 mm new
magnetic core dimensions lxwxh: 1100 x 950 mm
transmission: north
power: 2.2 kw 
check machine, ready to use
strong magnetic
 FE-SEPARATOR, PARENT BAND MAGNET, PERMANENT MAGNET WITH NEW RUBBER STRAP, DRIVE, DRIVE AND IDLER PULLEYS. OVERALL DIMENSIONS WITH GEAR LXWXH: 2125 X 1500 X 690 MM RUBBER BELT WIDTH: 1000 MM NEW MAGNETIC CORE DIMENSIONS LXWXH: 1100 X 950 MM TRANSMISSION: NORTH POWER: 2.2 KW CHECK MACHINE, READY TO USE STRONG MAGNETIC
Vendedor: Recotech Recyclingmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 45.700 €
Ubicación: Land-: 3.050 mm<br/>: 200 to<br/>: 15 kw<br/>: 2.550 mm<br/>: 445 mm<br/>: 210 mm<br/>: 104 mm<br/>: 858 mm<br/>: 250 mm<br/>: 4.500 mm<br/>: 1.390 mm<br/>: 2.520 mm<br/>: 150 lt<br/>: 7.950 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>manual, centralized adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>option:<br/><br/><br/>   cnc controlled crowning table â?¬ 3.630,-   cnc controlled r-axis â?¬ 5.550,-   <br/><br/><br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/> <br/><br/>bending length: 3.050 mm <br/>bending force: 200 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: manual, central adjustable <br/>back gauge: cnc controlled (x-axis) <br/>motor power: 15 kw <br/>distance between columns: 2.550 mm <br/>daylight: 445 mm <br/>stroke: 210 mm<br/>table width: 104 mm <br/>table height: 858 mm <br/>throat depth: 250 mm <br/>travel of back gauge (x): 500 mm <br/>oiltank: 150 lt <br/>length: 4.500 mm <br/>width: 1.390 mm <br/>height: 2.520 mm <br/>weight: 7.950 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.050 MM
: 200 TO
: 15 KW
: 2.550 MM
: 445 MM
: 210 MM
: 104 MM
: 858 MM
: 250 MM
: 4.500 MM
: 1.390 MM
: 2.520 MM
: 150 LT
: 7.950 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
MANUAL, CENTRALIZED ADJUSTABLE CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

OPTION:


CNC CONTROLLED CROWNING TABLE â?¬ 3.630,- CNC CONTROLLED R-AXIS â?¬ 5.550,-



WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)


BENDING LENGTH: 3.050 MM
BENDING FORCE: 200 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MANUAL, CENTRAL ADJUSTABLE
BACK GAUGE: CNC CONTROLLED (X-AXIS)
MOTOR POWER: 15 KW
DISTANCE BETWEEN COLUMNS: 2.550 MM
DAYLIGHT: 445 MM
STROKE: 210 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 858 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 500 MM
OILTANK: 150 LT
LENGTH: 4.500 MM
WIDTH: 1.390 MM
HEIGHT: 2.520 MM
WEIGHT: 7.950 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-general information:
year of manufacture 2010
control siemens 840 d sl shopmill
traverse paths x 620 mm y 520 mm z 460 mm
min. distance of spindle nose 150 mm
maximum distance spindle nose 610 mm

table:
table dimensions 㸠650 / 545 mm
maximum table load of 500 kg

spindle:
maximum speed 12,000 rpm
chuck sk40
tool changer 32-fold

tool magazine:
maximum tool length 290 mm
maximum tool weight 7 kg

dimensions and weight:
3.133 mm x 2,415 mm x 2.920 mm
weight approx. 7,500 kg

other facilities:
ikz factory cavity cooling
band filter system with booster pump
chip conveyor
complete housing GENERAL INFORMATION: YEAR OF MANUFACTURE 2010 CONTROL SIEMENS 840 D SL SHOPMILL TRAVERSE PATHS X 620 MM Y 520 MM Z 460 MM MIN. DISTANCE OF SPINDLE NOSE 150 MM MAXIMUM DISTANCE SPINDLE NOSE 610 MM TABLE: TABLE DIMENSIONS &ATILDE;&CEDIL; 650 / 545 MM MAXIMUM TABLE LOAD OF 500 KG SPINDLE: MAXIMUM SPEED 12,000 RPM CHUCK SK40 TOOL CHANGER 32-FOLD TOOL MAGAZINE: MAXIMUM TOOL LENGTH 290 MM MAXIMUM TOOL WEIGHT 7 KG DIMENSIONS AND WEIGHT: 3.133 MM X 2,415 MM X 2.920 MM WEIGHT APPROX. 7,500 KG OTHER FACILITIES: IKZ FACTORY CAVITY COOLING BAND FILTER SYSTEM WITH BOOSTER PUMP CHIP CONVEYOR COMPLETE HOUSING
Vendedor: CNC BOTE Johann Demmel
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-: 3.050 mm<br/>: 120 to<br/>: 11 kw<br/>: 2.550 mm<br/>: 375 mm<br/>: 180 mm<br/>: 104 mm<br/>: 878 mm<br/>: 250 mm<br/>: 620 mm<br/>: 150 lt<br/>: 4.200 mm<br/>: 1.230 mm<br/>: 2.400 mm<br/>: 5.900 kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-10 incl. pc-software<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>cnc controlled back gauge with linear guide and ball screw spindles<br/>manual, centralized adjustable crowning table <br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/><br/>(sample photo shows mod. pbf 30200)<br/><br/>option:<br/>   cnc controlled crowning table â?¬ 3.630,-   cnc controlled r-axis â?¬ 5.550,-   <br/><br/><br/>we have more than 600 references!<br/><br/>bending length: 3.050 mm <br/>bending force: 120 to <br/>axis: 3 (y1, y2, x) <br/>upper tool: yes <br/>lower tool: yes <br/>anti deflection: manual, central adjustable <br/>back gauge: cnc controlled (x-axis) <br/>motor power: 11 kw <br/>distance between columns: 2.550 mm <br/>daylight: 375 mm <br/>stroke: 180 mm<br/>table width: 104 mm <br/>table height: 878 mm <br/>throat depth: 250 mm <br/>travel of back gauge (x): 620 mm <br/>oiltank: 150 lt <br/>length: 4.200 mm <br/>width: 1.230 mm <br/>height: 2.400 mm <br/>weight: 5.900 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.050 MM
: 120 TO
: 11 KW
: 2.550 MM
: 375 MM
: 180 MM
: 104 MM
: 878 MM
: 250 MM
: 620 MM
: 150 LT
: 4.200 MM
: 1.230 MM
: 2.400 MM
: 5.900 KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-10 INCL. PC-SOFTWARE
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
CNC CONTROLLED BACK GAUGE WITH LINEAR GUIDE AND BALL SCREW SPINDLES
MANUAL, CENTRALIZED ADJUSTABLE CROWNING TABLE 
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH

(SAMPLE PHOTO SHOWS MOD. PBF 30200)

OPTION:
CNC CONTROLLED CROWNING TABLE â?¬ 3.630,- CNC CONTROLLED R-AXIS â?¬ 5.550,-


WE HAVE MORE THAN 600 REFERENCES!

BENDING LENGTH: 3.050 MM
BENDING FORCE: 120 TO
AXIS: 3 (Y1, Y2, X)
UPPER TOOL: YES
LOWER TOOL: YES
ANTI DEFLECTION: MANUAL, CENTRAL ADJUSTABLE
BACK GAUGE: CNC CONTROLLED (X-AXIS)
MOTOR POWER: 11 KW
DISTANCE BETWEEN COLUMNS: 2.550 MM
DAYLIGHT: 375 MM
STROKE: 180 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 878 MM
THROAT DEPTH: 250 MM
TRAVEL OF BACK GAUGE (X): 620 MM
OILTANK: 150 LT
LENGTH: 4.200 MM
WIDTH: 1.230 MM
HEIGHT: 2.400 MM
WEIGHT: 5.900 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-tip height: 180 mm
top width: 800 mm
spindle bore: 38 mm
bed width: 255 mm
speed: 28 2500 u/min
quill stroke: 100 mm
motor: 4 kw
approximate weight: 1500 kg
dimensions, lxwxh approx.: 2090 x 900 x 1430 mm

facilities:
-4-jaw lathe chuck bison
-quick-change holder system multifunction fixed with 3 inserts
-engine light
-bed fence
-coolant system
-revolving bezel
-mounts TIP HEIGHT: 180 MM TOP WIDTH: 800 MM SPINDLE BORE: 38 MM BED WIDTH: 255 MM SPEED: 28 2500 U/MIN QUILL STROKE: 100 MM MOTOR: 4 KW APPROXIMATE WEIGHT: 1500 KG DIMENSIONS, LXWXH APPROX.: 2090 X 900 X 1430 MM FACILITIES: -4-JAW LATHE CHUCK BISON -QUICK-CHANGE HOLDER SYSTEM MULTIFUNCTION FIXED WITH 3 INSERTS -ENGINE LIGHT -BED FENCE -COOLANT SYSTEM -REVOLVING BEZEL -MOUNTS
Vendedor: Weber Werkzeugmaschinen GbR
Año de construcción: usado
Precio: 4.870 €
Ubicación: Land-: 25/30 mm<br/>: 250 mm<br/>: 120 mm<br/>: 250 mm<br/>: 170 - 660 mm<br/>: 1.216 mm<br/>: 100 mm<br/>: 300 x 270 mm<br/>: 600 x 380 mm<br/>: 1,1/1,6 ps<br/>: 380 mm<br/>: 600 mm<br/>: 2.060 mm<br/>: 260 kg<br/>erlo  (made in spain)<br/><br/>for manufacturing use<br/><br/>high quality geardrive machine <br/>manual feed<br/>left-right drilling <br/>automatic tool ejector<br/>adjustable depth stop<br/>table with t-slots<br/>base plate with t-slots<br/>drill guard with micro switch<br/>lightening equipment<br/>user manual in english or german<br/>ce<br/><br/>option: <br/>reverse for tapping                                â?¬Â Â  570,--<br/><br/><br/>alternative: <br/>model tsr 25 (with coolant equipment):    â?¬Â Â  5.390,--<br/><br/>drilling capacity (steel/cast iron): 25/30 mm<br/>tapping capacity (steel/cast iron): m22 / m24<br/>more taper: 3<br/>gap: 250 mm<br/>revs: 65 - 3.060 r/min (8)<br/>spindle stroke: 120 mm<br/>distance spindle-column: 250 mm<br/>distance spindle-table: 170 - 660 mm<br/>distance spindle-base: 1.216 mm<br/>column diameter: 100 mm<br/>table: 300 x 270 mm<br/>base dimensions: 600 x 380 mm<br/>motor: 1,1/1,6 ps<br/>length: 380 mm<br/>width: 600 mm<br/>height: 2.060 mm<br/>weight: 260 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 25/30 MM
: 250 MM
: 120 MM
: 250 MM
: 170 - 660 MM
: 1.216 MM
: 100 MM
: 300 X 270 MM
: 600 X 380 MM
: 1,1/1,6 PS
: 380 MM
: 600 MM
: 2.060 MM
: 260 KG
ERLO  (MADE IN SPAIN)

FOR MANUFACTURING USE

HIGH QUALITY GEARDRIVE MACHINE
MANUAL FEED
LEFT-RIGHT DRILLING
AUTOMATIC TOOL EJECTOR
ADJUSTABLE DEPTH STOP
TABLE WITH T-SLOTS
BASE PLATE WITH T-SLOTS
DRILL GUARD WITH MICRO SWITCH
LIGHTENING EQUIPMENT
USER MANUAL IN ENGLISH OR GERMAN
CE

OPTION:
REVERSE FOR TAPPING                                �   570,--


ALTERNATIVE:
MODEL TSR 25 (WITH COOLANT EQUIPMENT):    �   5.390,--

DRILLING CAPACITY (STEEL/CAST IRON): 25/30 MM
TAPPING CAPACITY (STEEL/CAST IRON): M22 / M24
MORE TAPER: 3
GAP: 250 MM
REVS: 65 - 3.060 R/MIN (8)
SPINDLE STROKE: 120 MM
DISTANCE SPINDLE-COLUMN: 250 MM
DISTANCE SPINDLE-TABLE: 170 - 660 MM
DISTANCE SPINDLE-BASE: 1.216 MM
COLUMN DIAMETER: 100 MM
TABLE: 300 X 270 MM
BASE DIMENSIONS: 600 X 380 MM
MOTOR: 1,1/1,6 PS
LENGTH: 380 MM
WIDTH: 600 MM
HEIGHT: 2.060 MM
WEIGHT: 260 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land- injection moulding machine 
ube ubemax 2500

yom 1998

max. clamping force [kn] 25000
	the type of hydraulic clamping
	the dimension of mounting plates [mm] 2460x2260
	max. stroke [mm] 2700
	distance between columns [mm] 1830x1500
	snail diameter [mm] 132
	theoretical injection volume [cm3] 10838
	injection pressure [bar] 1722
	max. injection weight [g] 9970
	mould height (min.-max.) [mm] 900-1700
	working hours, 45400
	total weight 146
	instaled power [kw] 238
	outside dimension 14, 3 x 4, 4 x 3, 914x4, 4 x 7, 4 (with robot)

additional equipment

the robot for part taking out
thermostats-2pcs
cooler
loading trolley
material delivery system

injection moulding machine 
ube ubemax 3500

year of manufacture 1998

max. clamping force [kn] 35000
	the type of hydraulic clamping
	the dimension of mounting plates [mm] 3000x2680
	max. stroke [mm] 2700
	distance between columns [mm] 2164x1700
	snail diameter [mm] 140
	theoretical injection volume [cm3] 12930
	injection pressure [bar] 1760
	max. injection weight [g] 11896
	mould height (min.-max.) [mm] 1000-1900
	working hours, 48600
	total weight 225
	instaled power [kw] 287
	outside dimension 15, 3 x 5, 1x34, 415, 3 x 5, 1 x 7, 6 (with robot)

additional equipment

the robot for part taking out
thermostats-2pcs
cooler
loading trolley
material delivery system

INJECTION MOULDING MACHINE UBE UBEMAX 2500 YOM 1998 MAX. CLAMPING FORCE [KN] 25000 THE TYPE OF HYDRAULIC CLAMPING THE DIMENSION OF MOUNTING PLATES [MM] 2460X2260 MAX. STROKE [MM] 2700 DISTANCE BETWEEN COLUMNS [MM] 1830X1500 SNAIL DIAMETER [MM] 132 THEORETICAL INJECTION VOLUME [CM3] 10838 INJECTION PRESSURE [BAR] 1722 MAX. INJECTION WEIGHT [G] 9970 MOULD HEIGHT (MIN.-MAX.) [MM] 900-1700 WORKING HOURS, 45400 TOTAL WEIGHT 146 INSTALED POWER [KW] 238 OUTSIDE DIMENSION 14, 3 X 4, 4 X 3, 914X4, 4 X 7, 4 (WITH ROBOT) ADDITIONAL EQUIPMENT THE ROBOT FOR PART TAKING OUT THERMOSTATS-2PCS COOLER LOADING TROLLEY MATERIAL DELIVERY SYSTEM INJECTION MOULDING MACHINE UBE UBEMAX 3500 YEAR OF MANUFACTURE 1998 MAX. CLAMPING FORCE [KN] 35000 THE TYPE OF HYDRAULIC CLAMPING THE DIMENSION OF MOUNTING PLATES [MM] 3000X2680 MAX. STROKE [MM] 2700 DISTANCE BETWEEN COLUMNS [MM] 2164X1700 SNAIL DIAMETER [MM] 140 THEORETICAL INJECTION VOLUME [CM3] 12930 INJECTION PRESSURE [BAR] 1760 MAX. INJECTION WEIGHT [G] 11896 MOULD HEIGHT (MIN.-MAX.) [MM] 1000-1900 WORKING HOURS, 48600 TOTAL WEIGHT 225 INSTALED POWER [KW] 287 OUTSIDE DIMENSION 15, 3 X 5, 1X34, 415, 3 X 5, 1 X 7, 6 (WITH ROBOT) ADDITIONAL EQUIPMENT THE ROBOT FOR PART TAKING OUT THERMOSTATS-2PCS COOLER LOADING TROLLEY MATERIAL DELIVERY SYSTEM
Vendedor: GORBREX Machinery Trade Sp.z o.o.
Año de construcción: usado
Precio: 16.600 €
Ubicación: Land-: 4 mm<br/>: 2 mm<br/>: 3.030 mm<br/>: 180 mm<br/>: 4 kw<br/>: 4.600 mm<br/>: 1.120 mm<br/>: 1.020 mm<br/>: 4.250 kg<br/>3 rolls <br/>asymetric roll arrangement - with pre-bending <br/>forward tiltable upper roll <br/>mot. left- right control <br/>operation by foot-pedal <br/>hardened rolls <br/>digital readout<br/><br/>(sample photo)<br/><br/>sheet thickness: 4 mm<br/>prebending: 2 mm<br/>bending length: 3.030 mm<br/>roll diameter: 180 mm<br/>motor power: 4 kw<br/>length: 4.600 mm<br/>width: 1.120 mm<br/>heigth: 1.020 mm<br/>weight: 4.250 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 4 MM
: 2 MM
: 3.030 MM
: 180 MM
: 4 KW
: 4.600 MM
: 1.120 MM
: 1.020 MM
: 4.250 KG
3 ROLLS
ASYMETRIC ROLL ARRANGEMENT - WITH PRE-BENDING
FORWARD TILTABLE UPPER ROLL
MOT. LEFT- RIGHT CONTROL
OPERATION BY FOOT-PEDAL
HARDENED ROLLS
DIGITAL READOUT

(SAMPLE PHOTO)

SHEET THICKNESS: 4 MM
PREBENDING: 2 MM
BENDING LENGTH: 3.030 MM
ROLL DIAMETER: 180 MM
MOTOR POWER: 4 KW
LENGTH: 4.600 MM
WIDTH: 1.120 MM
HEIGTH: 1.020 MM
WEIGHT: 4.250 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type f6l413f

123 kw at 2500 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE F6L413F 123 KW AT 2500 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Precio: 20.400 €
Ubicación: Land-: 6 mm<br/>: 4 mm<br/>: 2.530 mm<br/>: 190 mm<br/>: 5,5 kw<br/>: 4.250 mm<br/>: 1.200 mm<br/>: 1.150 mm<br/>: 3.750 kg<br/>3 rolls <br/>asymetric roll arrangement - with pre-bending <br/>forward tiltable upper roll <br/>mot. left- right control <br/>operation by foot-pedal <br/>hardened rolls <br/>digital readout<br/><br/>(sample photo)<br/><br/>sheet thickness: 6 mm<br/>prebending: 4 mm<br/>bending length: 2.530 mm<br/>roll diameter: 190 mm<br/>motor power: 5,5 kw<br/>length: 4.250 mm<br/>width: 1.200 mm<br/>heigth: 1.150 mm<br/>weight: 3.750 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 6 MM
: 4 MM
: 2.530 MM
: 190 MM
: 5,5 KW
: 4.250 MM
: 1.200 MM
: 1.150 MM
: 3.750 KG
3 ROLLS
ASYMETRIC ROLL ARRANGEMENT - WITH PRE-BENDING
FORWARD TILTABLE UPPER ROLL
MOT. LEFT- RIGHT CONTROL
OPERATION BY FOOT-PEDAL
HARDENED ROLLS
DIGITAL READOUT

(SAMPLE PHOTO)

SHEET THICKNESS: 6 MM
PREBENDING: 4 MM
BENDING LENGTH: 2.530 MM
ROLL DIAMETER: 190 MM
MOTOR POWER: 5,5 KW
LENGTH: 4.250 MM
WIDTH: 1.200 MM
HEIGTH: 1.150 MM
WEIGHT: 3.750 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-machine type: wig welding machine.
manufacturer: oerlikon.
model: dtw 251-2.
year of build: 1990.
condition: good,.
type of offer: used machine,
     ,.	
technical data:.
type: wig / electr.,.
supply: 400 v,
power: 250 amps.
note: 9.6 of kva, water-cooling of.
weight: 150 kg.
     ,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  MACHINE TYPE: WIG WELDING MACHINE. MANUFACTURER: OERLIKON. MODEL: DTW 251-2. YEAR OF BUILD: 1990. CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TYPE: WIG / ELECTR.,. SUPPLY: 400 V, POWER: 250 AMPS. NOTE: 9.6 OF KVA, WATER-COOLING OF. WEIGHT: 150 KG. ,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 61.610 €
Ubicación: Land-: 4.050 mm<br/>: 175 to<br/>: 18,5 kw<br/>: 5.250 mm<br/>: 1.700 mm<br/>: 2.750 mm<br/>: 12.850 ~  kg<br/>3 axes (y1, y2, and x axis) <br/>cnc dt-15<br/>- intuitive touch-screen control (simple drawing of the bending outline with your finger)<br/>- direct programming of the bending angle<br/>- user friendly programming in dialogue form<br/>- graphic simulation of the bending sequence<br/>- automatic calculation of the blank sheet size<br/>- graphic product and tool memory<br/>- correction possibility<br/>- manual, half and fully automatic work mode<br/>- tonnage calculation/programming by cnc<br/>- internal database<br/>- usb interfaces for backup and programm transportation<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>cnc crowning table<br/>intermediate clamps for upper tool <br/>upper tool 1010/a/75°/0,8/105, sectioned, bending radius hardened and ground <br/>die holder for 60 mm dies <br/>die type 2009/85° (v 16, 22, 35, 50 mm) sectioned, geteilt, bending radii hardened and ground <br/>laser safety device fiessler akas mounted on the upper beam <br/>linear guided sheet support arms<br/>protection covers on the sides and back side <br/>according to ce rules<br/>oilfilling<br/>users manual in german and english<br/>(sample photo)<br/><br/>optional equipment:<br/><br/><br/>   cnc cybelec modeva 19t â?¬ 5.750,--   cnc controlled r-axis â?¬ 7.640,--   quick connecting terminals for the upper tool â?¬ 810,--   hydraulic or pneumatic tool clamping on request   <br/><br/>we have more than 600 references!<br/><br/><br/><br/><br/><br/><br/>bending length: 4.050 mm <br/>bending force: 175 to <br/>axes: y1 / y2 and x axes<br/>upper tool: 75° divided <br/>lower tool: 4 v- die 16,22,35 and 50 mm <br/>anti deflection: yes, motorized system controlled by cnc<br/>back gauge: cnc controlled<br/>motor power: 18,5 kw <br/>length: 5.250 mm <br/>width: 1.700 mm <br/>height: 2.750 mm<br/>weight: ~ 12.850 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 4.050 MM
: 175 TO
: 18,5 KW
: 5.250 MM
: 1.700 MM
: 2.750 MM
: 12.850 ~ KG
3 AXES (Y1, Y2, AND X AXIS) 
CNC DT-15
- INTUITIVE TOUCH-SCREEN CONTROL (SIMPLE DRAWING OF THE BENDING OUTLINE WITH YOUR FINGER)
- DIRECT PROGRAMMING OF THE BENDING ANGLE
- USER FRIENDLY PROGRAMMING IN DIALOGUE FORM
- GRAPHIC SIMULATION OF THE BENDING SEQUENCE
- AUTOMATIC CALCULATION OF THE BLANK SHEET SIZE
- GRAPHIC PRODUCT AND TOOL MEMORY
- CORRECTION POSSIBILITY
- MANUAL, HALF AND FULLY AUTOMATIC WORK MODE
- TONNAGE CALCULATION/PROGRAMMING BY CNC
- INTERNAL DATABASE
- USB INTERFACES FOR BACKUP AND PROGRAMM TRANSPORTATION
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
CNC CROWNING TABLE
INTERMEDIATE CLAMPS FOR UPPER TOOL 
UPPER TOOL 1010/A/75°/0,8/105, SECTIONED, BENDING RADIUS HARDENED AND GROUND 
DIE HOLDER FOR 60 MM DIES 
DIE TYPE 2009/85° (V 16, 22, 35, 50 MM) SECTIONED, GETEILT, BENDING RADII HARDENED AND GROUND 
LASER SAFETY DEVICE FIESSLER AKAS MOUNTED ON THE UPPER BEAM
LINEAR GUIDED SHEET SUPPORT ARMS
PROTECTION COVERS ON THE SIDES AND BACK SIDE 
ACCORDING TO CE RULES
OILFILLING
USERS MANUAL IN GERMAN AND ENGLISH
(SAMPLE PHOTO)

OPTIONAL EQUIPMENT:


CNC CYBELEC MODEVA 19T â?¬ 5.750,-- CNC CONTROLLED R-AXIS â?¬ 7.640,-- QUICK CONNECTING TERMINALS FOR THE UPPER TOOL â?¬ 810,-- HYDRAULIC OR PNEUMATIC TOOL CLAMPING ON REQUEST

WE HAVE MORE THAN 600 REFERENCES!






BENDING LENGTH: 4.050 MM
BENDING FORCE: 175 TO
AXES: Y1 / Y2 AND X AXES
UPPER TOOL: 75° DIVIDED
LOWER TOOL: 4 V- DIE 16,22,35 AND 50 MM
ANTI DEFLECTION: YES, MOTORIZED SYSTEM CONTROLLED BY CNC
BACK GAUGE: CNC CONTROLLED
MOTOR POWER: 18,5 KW
LENGTH: 5.250 MM
WIDTH: 1.700 MM
HEIGHT: 2.750 MM
WEIGHT: ~ 12.850 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-type of machine: center lathe.
manufacturer: meuser,.
model: m 2 l,.
year of construction: 1975.
condition: good,.
type of offer: used machine,
     ,.	
technical data:.
tip height: 255 mm,
top width: 2550 mm,
spindle bore: 63 mm,
spindle speed: 25-1120 rpm,.
drive: 7.5 kw.
weight: 2500 kg.
     ,.
the machine is in a good shape and ready for operation. it can be visited and demonstrated at our location.,.
     ,.
we will be pleased if you take an interest in our offer.,.
  TYPE OF MACHINE: CENTER LATHE. MANUFACTURER: MEUSER,. MODEL: M 2 L,. YEAR OF CONSTRUCTION: 1975. CONDITION: GOOD,. TYPE OF OFFER: USED MACHINE, ,. TECHNICAL DATA:. TIP HEIGHT: 255 MM, TOP WIDTH: 2550 MM, SPINDLE BORE: 63 MM, SPINDLE SPEED: 25-1120 RPM,. DRIVE: 7.5 KW. WEIGHT: 2500 KG. ,. THE MACHINE IS IN A GOOD SHAPE AND READY FOR OPERATION. IT CAN BE VISITED AND DEMONSTRATED AT OUR LOCATION.,. ,. WE WILL BE PLEASED IF YOU TAKE AN INTEREST IN OUR OFFER.,.
Vendedor: H.-G. Zach Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 74.200 €
Ubicación: Land-: 3.050 mm<br/>: 220 to<br/>: 22 kw<br/>: 2.600 mm<br/>: 530 mm<br/>: 104 mm<br/>: 900 mm<br/>: 410 mm<br/>: 650 mm<br/>: 4.250 mm<br/>: 1.770 mm<br/>: 2.900 mm<br/>: 12.500 kg<br/>advantages compared to ad-r series:<br/><br/>- touch screen control cybelec modeva 19t with 3d presentation of the programmed workpiece<br/>- extended option amount<br/><br/><br/>standard equiptment:<br/><br/>3d grafic colour display control cybelec modeva 19t (touchscreen) for y1, y2 , x and r axes incl. bending sequence calculation, numeric display and grafic<br/>servo motorized back gauge on linear guides and ball screws<br/>back gauge finger blocks on double linear guides<br/>sectioned goose neck upper tool 1010/a/75°<br/>4-v die block 60x60 2009 (v= 16,22,35 and 50 mm)<br/>mot. anti deflection adjustable by cnc control<br/>sheet support arms on linear guiding<br/>laser safety device on upper beam<br/>oil filling<br/>users manual in english and german<br/><br/><br/>options:<br/><br/>additional controlled axes of back gauge<br/>ap3-ap4 bending supports with sliding guide<br/>hydr. upper- and lower tool clamping for wila tools<br/>die relocate feature<br/>sheet feeding feature<br/>tandem preperation<br/>cnc delem da-66t<br/>3d touch screen cnc delem da-69t<br/><br/>we have more than 600 references!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/>bending length: 3.050 mm<br/>bending force: 220 to<br/>axis: y1 / y2, x und r axes<br/>upper tool: 1010/a/75° goose neck, sectioned<br/>lower tool: 4-v die 60x60 2009 (v= 16,22,35 and 50 mm)<br/>anti deflection: cnc contolled<br/>back gauge: cnc conrolled<br/>motor power: 22 kw<br/>distance between columns: 	2.600 mm<br/>daylight: 530 mm<br/>table width: 104 mm<br/>table height: 900 mm<br/>throat depth: 410 mm<br/>travel of back gauge (x): 650 mm<br/>length: 4.250 mm<br/>width: 1.770 mm<br/>height: 2.900 mm<br/>weight: 12.500 kg<br/><br/><br/><small>the data for this ad was created with modulmws - the software solution of logotech ohg.</small><br/> : 3.050 MM
: 220 TO
: 22 KW
: 2.600 MM
: 530 MM
: 104 MM
: 900 MM
: 410 MM
: 650 MM
: 4.250 MM
: 1.770 MM
: 2.900 MM
: 12.500 KG
ADVANTAGES COMPARED TO AD-R SERIES:

- TOUCH SCREEN CONTROL CYBELEC MODEVA 19T WITH 3D PRESENTATION OF THE PROGRAMMED WORKPIECE
- EXTENDED OPTION AMOUNT


STANDARD EQUIPTMENT:

3D GRAFIC COLOUR DISPLAY CONTROL CYBELEC MODEVA 19T (TOUCHSCREEN) FOR Y1, Y2 , X AND R AXES INCL. BENDING SEQUENCE CALCULATION, NUMERIC DISPLAY AND GRAFIC
SERVO MOTORIZED BACK GAUGE ON LINEAR GUIDES AND BALL SCREWS
BACK GAUGE FINGER BLOCKS ON DOUBLE LINEAR GUIDES
SECTIONED GOOSE NECK UPPER TOOL 1010/A/75°
4-V DIE BLOCK 60X60 2009 (V= 16,22,35 AND 50 MM)
MOT. ANTI DEFLECTION ADJUSTABLE BY CNC CONTROL
SHEET SUPPORT ARMS ON LINEAR GUIDING
LASER SAFETY DEVICE ON UPPER BEAM
OIL FILLING
USERS MANUAL IN ENGLISH AND GERMAN


OPTIONS:

ADDITIONAL CONTROLLED AXES OF BACK GAUGE
AP3-AP4 BENDING SUPPORTS WITH SLIDING GUIDE
HYDR. UPPER- AND LOWER TOOL CLAMPING FOR WILA TOOLS
DIE RELOCATE FEATURE
SHEET FEEDING FEATURE
TANDEM PREPERATION
CNC DELEM DA-66T
3D TOUCH SCREEN CNC DELEM DA-69T

WE HAVE MORE THAN 600 REFERENCES!

(SAMPLE PHOTO)






BENDING LENGTH: 3.050 MM
BENDING FORCE: 220 TO
AXIS: Y1 / Y2, X UND R AXES
UPPER TOOL: 1010/A/75° GOOSE NECK, SECTIONED
LOWER TOOL: 4-V DIE 60X60 2009 (V= 16,22,35 AND 50 MM)
ANTI DEFLECTION: CNC CONTOLLED
BACK GAUGE: CNC CONROLLED
MOTOR POWER: 22 KW
DISTANCE BETWEEN COLUMNS: 2.600 MM
DAYLIGHT: 530 MM
TABLE WIDTH: 104 MM
TABLE HEIGHT: 900 MM
THROAT DEPTH: 410 MM
TRAVEL OF BACK GAUGE (X): 650 MM
LENGTH: 4.250 MM
WIDTH: 1.770 MM
HEIGHT: 2.900 MM
WEIGHT: 12.500 KG


THE DATA FOR THIS AD WAS CREATED WITH MODULMWS - THE SOFTWARE SOLUTION OF LOGOTECH OHG.
Vendedor: HESSE+CO GesmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)