239 ofertas

Año de construcción: usado
Ubicación: Land-manex new bottle depalletizer and transport system 47 000 bph

manufacturer: manex & co a.s.
type: d313-65l
year: 2008
serial number: 07/030/01 depalletiser
line capacity: 47 000 bottles / hour
electric supply: 32.29 kw ? 230/400 v ? 50 hz
air consumption: 31 m3/h, min 6 bar
control plc: siemens simatic multi panel
pallet dimensions: 1 200 x 1 000 mm
documentation: in english (operating manuals and spare parts list)
condition: installed - very good condition

this system includes smartscan scanning of pallets, a robot for stacking cardboard between the layers, conveyors for transporting the bottles to the next unit and stacking/removing system for pallets. the portal system of machine ensures its maximum stiffness and minimum of covered area. the frame of machine is welded of the bended profiles made of carbon steel. the protective paint is three-plied anticorrosive basic paint and two layers of the top covering paint. depalletizing completion by the pallet chamber and layer pick-up. the basic drive of machine ? the transfer cases are made by sew. the pneumatic elements are made by festo.

working description:
a pallet with a stack of new bottles is transported by a forklift truck to the chain conveyor. operators remove foil from the stack. the pallet with the bottles then moves to the chain conveyor in the depalletizer lift. the depalletizer lift lifts the conveyor with the full pallet as high as required. the transporter moves the top layer of bottles with the top layer pad to the lamella sorting table. the layer pad pick-up removes the layer pad and places it into the layer pad magazine. the bottles are then sorted to the lamella bottle conveyor and continue on the bottle track to the bottle inserter. conveyor in the lift moves up by the thickness of a layer and the entire cycle repeats. once the last layer bottles has been moved by the last remaining layer pad on the pallet, the pick-up removes the layer pads from the pallet. conveyor with the empty pallet moves down to the bottom position. inverter moves in on the roller conveyor to the pallet magazine. the crate transport system moves empty crates to the bottle inserter conveyor. it inserts the bottles from the bottle conveyor to crates. full crates continue moving on the crate conveyors to the sorting roller table.

machinery components:
- chain conveyor for pallets, 3 pcs
- aggregate of depalletization
o elevator
o chain conveyor in the elevator
o transfer layer
o sheet stop
o pinching
o rear bottle thrust
- inverter
- roller conveyor for pallets
- pallet magazine
- layer pad pick-up - complete
o layer pad pick-up
o layer pad magazine
- pallet layer pad pick-up
- lamella bottle splitting table
- lamella bottle conveyor, 3 pcs
- lamella crate conveyor, 7 pcs
- roller sorting table
- platform
- fence   MANEX NEW BOTTLE DEPALLETIZER AND TRANSPORT SYSTEM 47 000 BPH MANUFACTURER: MANEX & CO A.S. TYPE: D313-65L YEAR: 2008 SERIAL NUMBER: 07/030/01 DEPALLETISER LINE CAPACITY: 47 000 BOTTLES / HOUR ELECTRIC SUPPLY: 32.29 KW ? 230/400 V ? 50 HZ AIR CONSUMPTION: 31 M3/H, MIN 6 BAR CONTROL PLC: SIEMENS SIMATIC MULTI PANEL PALLET DIMENSIONS: 1 200 X 1 000 MM DOCUMENTATION: IN ENGLISH (OPERATING MANUALS AND SPARE PARTS LIST) CONDITION: INSTALLED - VERY GOOD CONDITION THIS SYSTEM INCLUDES SMARTSCAN SCANNING OF PALLETS, A ROBOT FOR STACKING CARDBOARD BETWEEN THE LAYERS, CONVEYORS FOR TRANSPORTING THE BOTTLES TO THE NEXT UNIT AND STACKING/REMOVING SYSTEM FOR PALLETS. THE PORTAL SYSTEM OF MACHINE ENSURES ITS MAXIMUM STIFFNESS AND MINIMUM OF COVERED AREA. THE FRAME OF MACHINE IS WELDED OF THE BENDED PROFILES MADE OF CARBON STEEL. THE PROTECTIVE PAINT IS THREE-PLIED ANTICORROSIVE BASIC PAINT AND TWO LAYERS OF THE TOP COVERING PAINT. DEPALLETIZING COMPLETION BY THE PALLET CHAMBER AND LAYER PICK-UP. THE BASIC DRIVE OF MACHINE ? THE TRANSFER CASES ARE MADE BY SEW. THE PNEUMATIC ELEMENTS ARE MADE BY FESTO. WORKING DESCRIPTION: A PALLET WITH A STACK OF NEW BOTTLES IS TRANSPORTED BY A FORKLIFT TRUCK TO THE CHAIN CONVEYOR. OPERATORS REMOVE FOIL FROM THE STACK. THE PALLET WITH THE BOTTLES THEN MOVES TO THE CHAIN CONVEYOR IN THE DEPALLETIZER LIFT. THE DEPALLETIZER LIFT LIFTS THE CONVEYOR WITH THE FULL PALLET AS HIGH AS REQUIRED. THE TRANSPORTER MOVES THE TOP LAYER OF BOTTLES WITH THE TOP LAYER PAD TO THE LAMELLA SORTING TABLE. THE LAYER PAD PICK-UP REMOVES THE LAYER PAD AND PLACES IT INTO THE LAYER PAD MAGAZINE. THE BOTTLES ARE THEN SORTED TO THE LAMELLA BOTTLE CONVEYOR AND CONTINUE ON THE BOTTLE TRACK TO THE BOTTLE INSERTER. CONVEYOR IN THE LIFT MOVES UP BY THE THICKNESS OF A LAYER AND THE ENTIRE CYCLE REPEATS. ONCE THE LAST LAYER BOTTLES HAS BEEN MOVED BY THE LAST REMAINING LAYER PAD ON THE PALLET, THE PICK-UP REMOVES THE LAYER PADS FROM THE PALLET. CONVEYOR WITH THE EMPTY PALLET MOVES DOWN TO THE BOTTOM POSITION. INVERTER MOVES IN ON THE ROLLER CONVEYOR TO THE PALLET MAGAZINE. THE CRATE TRANSPORT SYSTEM MOVES EMPTY CRATES TO THE BOTTLE INSERTER CONVEYOR. IT INSERTS THE BOTTLES FROM THE BOTTLE CONVEYOR TO CRATES. FULL CRATES CONTINUE MOVING ON THE CRATE CONVEYORS TO THE SORTING ROLLER TABLE. MACHINERY COMPONENTS: - CHAIN CONVEYOR FOR PALLETS, 3 PCS - AGGREGATE OF DEPALLETIZATION O ELEVATOR O CHAIN CONVEYOR IN THE ELEVATOR O TRANSFER LAYER O SHEET STOP O PINCHING O REAR BOTTLE THRUST - INVERTER - ROLLER CONVEYOR FOR PALLETS - PALLET MAGAZINE - LAYER PAD PICK-UP - COMPLETE O LAYER PAD PICK-UP O LAYER PAD MAGAZINE - PALLET LAYER PAD PICK-UP - LAMELLA BOTTLE SPLITTING TABLE - LAMELLA BOTTLE CONVEYOR, 3 PCS - LAMELLA CRATE CONVEYOR, 7 PCS - ROLLER SORTING TABLE - PLATFORM - FENCE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink high speed sleeve shrink machine for bottles/cans (with tray) - ty45<br><br>high speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (nordson glue system) and add a tray underneath the multipack. including shrink tunnel. suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. suitable for pe shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. <br><br>- specifications: siemens plc control and siemens touchscreen, schneider contactor, festo cylinder, siemens servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: l(150-720)xw(250-450)xh(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: l10070xw1650xh2485mm | weight: 5600kg | power: 380v, 13kw (machine) and 380v, 63.75kw (shrink tunnel) | compressed air: 160 liter/min, 6bar.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK HIGH SPEED SLEEVE SHRINK MACHINE FOR BOTTLES/CANS (WITH TRAY) - TY45

HIGH SPEED SLEEVE SHRINKING MACHINE TO DO MULTIPACKS OF BOTTLES, CANS, ETC. INCLUDING MODULE TO BUILD UP (NORDSON GLUE SYSTEM) AND ADD A TRAY UNDERNEATH THE MULTIPACK. INCLUDING SHRINK TUNNEL. SUITABLE TO DO 2X3, 3X4, 4X6 OR OTHER ARRANGEMENTS OF CONTAINERS. SUITABLE FOR PE SHRINK FILM WITH A THICKNESS OF 60-100µM AND A FILM TRANSVERSE CONTRACTION RATIO OF 30-40% AND A LONGITUDIONAL CONTRACTION RATIO OF 60-70%.

- SPECIFICATIONS: SIEMENS PLC CONTROL AND SIEMENS TOUCHSCREEN, SCHNEIDER CONTACTOR, FESTO CYLINDER, SIEMENS SERVO MOTORS TO FEED AND CUT THE FILM | BOTTLE (CAN OR CONTAINER) SIZE: 0.25 TO 1.5 LITER, DIAMETER: 55-120MM, HEIGHT: 120-300MM | MAX. DIMENSIONS FOR THE COMPLETE MULTIPACK: L(150-720)XW(250-450)XH(120-300)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | TOTAL DIMENSIONS: L10070XW1650XH2485MM | WEIGHT: 5600KG | POWER: 380V, 13KW (MACHINE) AND 380V, 63.75KW (SHRINK TUNNEL) | COMPRESSED AIR: 160 LITER/MIN, 6BAR.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-agitator festool mx 1000/2 e ef AGITATOR FESTOOL MX 1000/2 E EF
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink high speed sleeve shrink machine for bottles/cans (with pads) - pd45<br><br>high speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to add a pad underneath the multipack. including shrink tunnel. suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. suitable for pe shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. <br><br>- specifications: siemens plc control and siemens touchscreen, schneider contactor, festo cylinder, siemens servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm | max. dimensions for the complete multipack: l(150-720)xw(250-450)xh(120-300)mm | max. speed of the machine in neutral: 45 cycles/min | total dimensions: l6800xw1650xh2270mm, 5500kg | power: 380v, 9kw (machine) and 380v, 63,75kw (shrink tunnel) | compressed air: 160 liter/min, 6bar.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK HIGH SPEED SLEEVE SHRINK MACHINE FOR BOTTLES/CANS (WITH PADS) - PD45

HIGH SPEED SLEEVE SHRINKING MACHINE TO DO MULTIPACKS OF BOTTLES, CANS, ETC. INCLUDING MODULE TO ADD A PAD UNDERNEATH THE MULTIPACK. INCLUDING SHRINK TUNNEL. SUITABLE TO DO 2X3, 3X4, 4X6 OR OTHER ARRANGEMENTS OF CONTAINERS. SUITABLE FOR PE SHRINK FILM WITH A THICKNESS OF 60-100µM AND A FILM TRANSVERSE CONTRACTION RATIO OF 30-40% AND A LONGITUDIONAL CONTRACTION RATIO OF 60-70%.

- SPECIFICATIONS: SIEMENS PLC CONTROL AND SIEMENS TOUCHSCREEN, SCHNEIDER CONTACTOR, FESTO CYLINDER, SIEMENS SERVO MOTORS TO FEED AND CUT THE FILM | BOTTLE (CAN OR CONTAINER) SIZE: 0.25 TO 1.5 LITER, DIAMETER: 50-120MM, HEIGHT: 120-300MM | MAX. DIMENSIONS FOR THE COMPLETE MULTIPACK: L(150-720)XW(250-450)XH(120-300)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 45 CYCLES/MIN | TOTAL DIMENSIONS: L6800XW1650XH2270MM, 5500KG | POWER: 380V, 9KW (MACHINE) AND 380V, 63,75KW (SHRINK TUNNEL) | COMPRESSED AIR: 160 LITER/MIN, 6BAR.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-motor 4kw/3kw
right / left rotation
4 speed 3000/5000/6000/10000 r/min
30s spindle
crosscut saw 1.5 kw
carriage with clamp
festo window stop (not complete)
cable with plug
dust nozzle 120 mm
wrench 50 mm
spindle key
shaper fence with wooden jaws and mounting screws, both sides separately adjustable MOTOR 4KW/3KW RIGHT / LEFT ROTATION 4 SPEED 3000/5000/6000/10000 R/MIN 30S SPINDLE CROSSCUT SAW 1.5 KW CARRIAGE WITH CLAMP FESTO WINDOW STOP (NOT COMPLETE) CABLE WITH PLUG DUST NOZZLE 120 MM WRENCH 50 MM SPINDLE KEY SHAPER FENCE WITH WOODEN JAWS AND MOUNTING SCREWS, BOTH SIDES SEPARATELY ADJUSTABLE
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec sleeveshrink high speed sleeve shrink machine for bottles/cans (no tray) - nt50<br><br>high speed sleeve shrinking machine to do multipacks of bottles, cans, etc. without using a tray or a pad. including shrink tunnel. suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. suitable for pe shrink film with a thickness of 60-100µm and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. <br><br>- specifications: siemens plc control and siemens touchscreen, schneider contactor, festo cylinder, siemens servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 50-120mm, height: 120-300mm | max. dimensions for the complete multipack: l(150-720)xw(110-450)xh(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: l8345xw1460xh2400mm | weight: 5000kg | power: 380v | 6kw (machine) and 380v, 63.75kw (shrink tunnel) | compressed air: 60 liter/min, 6bar.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC SLEEVESHRINK HIGH SPEED SLEEVE SHRINK MACHINE FOR BOTTLES/CANS (NO TRAY) - NT50

HIGH SPEED SLEEVE SHRINKING MACHINE TO DO MULTIPACKS OF BOTTLES, CANS, ETC. WITHOUT USING A TRAY OR A PAD. INCLUDING SHRINK TUNNEL. SUITABLE TO DO 2X3, 3X4, 4X6 OR OTHER ARRANGEMENTS OF CONTAINERS. SUITABLE FOR PE SHRINK FILM WITH A THICKNESS OF 60-100µM AND A FILM TRANSVERSE CONTRACTION RATIO OF 30-40% AND A LONGITUDIONAL CONTRACTION RATIO OF 60-70%.

- SPECIFICATIONS: SIEMENS PLC CONTROL AND SIEMENS TOUCHSCREEN, SCHNEIDER CONTACTOR, FESTO CYLINDER, SIEMENS SERVO MOTORS TO FEED AND CUT THE FILM | BOTTLE (CAN OR CONTAINER) SIZE: 0.25 TO 1.5 LITER, DIAMETER: 50-120MM, HEIGHT: 120-300MM | MAX. DIMENSIONS FOR THE COMPLETE MULTIPACK: L(150-720)XW(110-450)XH(120-300)MM | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | TOTAL DIMENSIONS: L8345XW1460XH2400MM | WEIGHT: 5000KG | POWER: 380V | 6KW (MACHINE) AND 380V, 63.75KW (SHRINK TUNNEL) | COMPRESSED AIR: 60 LITER/MIN, 6BAR.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-crosscut saw motor 1,8 kw
milling motor above 1.8 kw
milling motor below 1.8 kw
sliding table with superfix manual clamping devices,
saw blade
2 st. split washers CROSSCUT SAW MOTOR 1,8 KW MILLING MOTOR ABOVE 1.8 KW MILLING MOTOR BELOW 1.8 KW SLIDING TABLE WITH SUPERFIX MANUAL CLAMPING DEVICES, SAW BLADE 2 ST. SPLIT WASHERS
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap multi-feed-vffs-system (2 auger-/2 volume-doser) to mix granulate/powder pillow bg<br><br>automatic packing machine: siemens plc controlled, equipped with volumetric cups system. applicable for the granule packing. standard features integrate metering, bag-making, packaging, sealing, printing and counting. standard positioning with servo film transporting system. stable for transporting film with two synchronous belts. high automation with auto correction function. reasonable structure, convenient adjusting operation and maintenance. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/minute | bag size: l(50-230mm), w(50-150mm) | the max width of packing film: 320 mm | thickness of film: 0.04-0.09mm | bag making mode: pillow bag, gusset bag | range of measuring: 150-500ml | air consumption: 0.8mps 0.25m³/min | power/voltage: 2kw/220v, 50hz | dimension (lxwxh): 1200×905×1300mm | weight: 300kg | body: ss304 | touch screen siemens, plc siemens, control valve siemens, servo motor panasonic, cylinder and pneumatic components smc/festo, solenoid valve smc/festo, triplet union smc, thermostats omron. - volumetric cup device: suitable for automatic measuring of small granule materials and powder materials with good fluidity, such as granulated sugar, seeds, etc. <br><br>- specifications: max. speed of the machine in neutral: 60 cycles/min | weight range: 100g-500g | soft brush with motor: the turntable is equipped with a soft brush to handle the product carefully | auger system: range 1-50ml | accuracy: within +/-0.1g | max. speed of the machine in neutral: 50 cycles/min | power source: 220v, 50hz/110w. - please note: this is only a sample system. please let us know your requirements.<br><br>that machine/system is available in different versions for different bag types, packaging sizes and with different packaging speeds.<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MULTI-FEED-VFFS-SYSTEM (2 AUGER-/2 VOLUME-DOSER) TO MIX GRANULATE/POWDER PILLOW BG

AUTOMATIC PACKING MACHINE: SIEMENS PLC CONTROLLED, EQUIPPED WITH VOLUMETRIC CUPS SYSTEM. APPLICABLE FOR THE GRANULE PACKING. STANDARD FEATURES INTEGRATE METERING, BAG-MAKING, PACKAGING, SEALING, PRINTING AND COUNTING. STANDARD POSITIONING WITH SERVO FILM TRANSPORTING SYSTEM. STABLE FOR TRANSPORTING FILM WITH TWO SYNCHRONOUS BELTS. HIGH AUTOMATION WITH AUTO CORRECTION FUNCTION. REASONABLE STRUCTURE, CONVENIENT ADJUSTING OPERATION AND MAINTENANCE.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MINUTE | BAG SIZE: L(50-230MM), W(50-150MM) | THE MAX WIDTH OF PACKING FILM: 320 MM | THICKNESS OF FILM: 0.04-0.09MM | BAG MAKING MODE: PILLOW BAG, GUSSET BAG | RANGE OF MEASURING: 150-500ML | AIR CONSUMPTION: 0.8MPS 0.25M³/MIN | POWER/VOLTAGE: 2KW/220V, 50HZ | DIMENSION (LXWXH): 1200×905×1300MM | WEIGHT: 300KG | BODY: SS304 | TOUCH SCREEN SIEMENS, PLC SIEMENS, CONTROL VALVE SIEMENS, SERVO MOTOR PANASONIC, CYLINDER AND PNEUMATIC COMPONENTS SMC/FESTO, SOLENOID VALVE SMC/FESTO, TRIPLET UNION SMC, THERMOSTATS OMRON. - VOLUMETRIC CUP DEVICE: SUITABLE FOR AUTOMATIC MEASURING OF SMALL GRANULE MATERIALS AND POWDER MATERIALS WITH GOOD FLUIDITY, SUCH AS GRANULATED SUGAR, SEEDS, ETC.

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 60 CYCLES/MIN | WEIGHT RANGE: 100G-500G | SOFT BRUSH WITH MOTOR: THE TURNTABLE IS EQUIPPED WITH A SOFT BRUSH TO HANDLE THE PRODUCT CAREFULLY | AUGER SYSTEM: RANGE 1-50ML | ACCURACY: WITHIN +/-0.1G | MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MIN | POWER SOURCE: 220V, 50HZ/110W. - PLEASE NOTE: THIS IS ONLY A SAMPLE SYSTEM. PLEASE LET US KNOW YOUR REQUIREMENTS.

THAT MACHINE/SYSTEM IS AVAILABLE IN DIFFERENT VERSIONS FOR DIFFERENT BAG TYPES, PACKAGING SIZES AND WITH DIFFERENT PACKAGING SPEEDS.

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-wall design
with door pad
with support for narrow frame
tensioner feasible
sword 8-10 x 30 x 150 mm with chain 10 mm WALL DESIGN WITH DOOR PAD WITH SUPPORT FOR NARROW FRAME TENSIONER FEASIBLE SWORD 8-10 X 30 X 150 MM WITH CHAIN 10 MM
Vendedor: Wilhelm Bachmann GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-amtec vertiwrap machine liquid/paste pillow 0-1000ml / 50<br><br>vertical filling machine for liquids or pastes into pillow-bags. including liquid dosing device (for high or low viscosity liquids/pastes). <br><br>- specifications: max. speed of the machine in neutral: 50 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80°c | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m³, 6bar | 220v, 4.8kw. schneider film pulling motor, panasonic/autonics print mark sensor, 7 touchscreen, omron plc, festo pneumatic parts (horizontal seal), other parts from airtac, omron 4 way temperature control, electronic parts from schneider / omron. stainless steel version (ss304), including hot printer (2 lines, 10 characters). dosing equipment: pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. machine dimensions and weight: l1080xw1300xh1400mm, 550kg<br><br>our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. sometimes also not yet fully finished systems are available that can be finished according to your specifications. deviations from the sample photo are possible. an intermediate sale is reserved. - all machines are available with full warranty. AMTEC VERTIWRAP MACHINE LIQUID/PASTE PILLOW 0-1000ML / 50

VERTICAL FILLING MACHINE FOR LIQUIDS OR PASTES INTO PILLOW-BAGS. INCLUDING LIQUID DOSING DEVICE (FOR HIGH OR LOW VISCOSITY LIQUIDS/PASTES).

- SPECIFICATIONS: MAX. SPEED OF THE MACHINE IN NEUTRAL: 50 CYCLES/MINUTE | SUITABLE FOR VOLUMES FROM 0-1000ML | FILLING TEMPERATURE: UP TO 80°C | ACCURACY: +/- 1.0% (DEPENDING ON PRODUCT) | MAX. FILM WIDTH: 430MM | BAG SIZE: MAX. 340X210MM | 1.5M³, 6BAR | 220V, 4.8KW. SCHNEIDER FILM PULLING MOTOR, PANASONIC/AUTONICS PRINT MARK SENSOR, 7 TOUCHSCREEN, OMRON PLC, FESTO PNEUMATIC PARTS (HORIZONTAL SEAL), OTHER PARTS FROM AIRTAC, OMRON 4 WAY TEMPERATURE CONTROL, ELECTRONIC PARTS FROM SCHNEIDER / OMRON. STAINLESS STEEL VERSION (SS304), INCLUDING HOT PRINTER (2 LINES, 10 CHARACTERS). DOSING EQUIPMENT: PUMP WITH FILLING RANGE OF 100-1000ML, 40 LITER HOPPER TANK WITH DOUBLE WALL WITH WARM WATER CIRCULATION. MACHINE DIMENSIONS AND WEIGHT: L1080XW1300XH1400MM, 550KG

OUR MACHINES ARE AVAILABLE AS SAMPLE, EXHIBITION OR DEMONSTRATION MACHINES AND AVAILABLE DIRECTLY FROM STOCK/OVERSTOCK. SOMETIMES ALSO NOT YET FULLY FINISHED SYSTEMS ARE AVAILABLE THAT CAN BE FINISHED ACCORDING TO YOUR SPECIFICATIONS. DEVIATIONS FROM THE SAMPLE PHOTO ARE POSSIBLE. AN INTERMEDIATE SALE IS RESERVED. - ALL MACHINES ARE AVAILABLE WITH FULL WARRANTY.
Vendedor: BluePack Machines GmbH
Año de construcción: usado
Ubicación: Land-a line for filling and packaging creams:

1. inpucker for jars , type: fes201, producer: groninger, year:2009
2. filler plus 1 mobile hopper, type: dfv 4005, producer: groninger, year: 2005
3. capper, type: mcs202l, producer: groninger, year: 2005
4. unscrambler cap, type:zsk1200 ,producer: groninger, year: 2008
5. container and elevator cap, type: de120, producer: groninger, year: 1994
6. labelling cap, type: gamma, producer: promark, year: 2010
7. depucker, type: omikron, producer: promark, year: 2010
8. labelling base label,type: gamma, producer: promark, year: 2010
9. labelling wrap label,type: gamma, producer: promark, year: 2010
10. printer, type: smart datex10, producer:markem, year: 2008
11. inpucker, type: paxinpacker, producer: unilogo, year: 2010
12. cartoning machine, type:avv, producer: cam, year: 2009
13. mechanical turning  carton, festo, year: 2011
14. overwrapper , type:bfb3701,producer: ima, year: 2008
15. shipper sealing  unit, type:sm11-s, producer: siat, year: 2005                       A LINE FOR FILLING AND PACKAGING CREAMS: 1. INPUCKER FOR JARS , TYPE: FES201, PRODUCER: GRONINGER, YEAR:2009 2. FILLER PLUS 1 MOBILE HOPPER, TYPE: DFV 4005, PRODUCER: GRONINGER, YEAR: 2005 3. CAPPER, TYPE: MCS202L, PRODUCER: GRONINGER, YEAR: 2005 4. UNSCRAMBLER CAP, TYPE:ZSK1200 ,PRODUCER: GRONINGER, YEAR: 2008 5. CONTAINER AND ELEVATOR CAP, TYPE: DE120, PRODUCER: GRONINGER, YEAR: 1994 6. LABELLING CAP, TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 7. DEPUCKER, TYPE: OMIKRON, PRODUCER: PROMARK, YEAR: 2010 8. LABELLING BASE LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 9. LABELLING WRAP LABEL,TYPE: GAMMA, PRODUCER: PROMARK, YEAR: 2010 10. PRINTER, TYPE: SMART DATEX10, PRODUCER:MARKEM, YEAR: 2008 11. INPUCKER, TYPE: PAXINPACKER, PRODUCER: UNILOGO, YEAR: 2010 12. CARTONING MACHINE, TYPE:AVV, PRODUCER: CAM, YEAR: 2009 13. MECHANICAL TURNING  CARTON, FESTO, YEAR: 2011 14. OVERWRAPPER , TYPE:BFB3701,PRODUCER: IMA, YEAR: 2008 15. SHIPPER SEALING  UNIT, TYPE:SM11-S, PRODUCER: SIAT, YEAR: 2005                      
Vendedor: Biovesta
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: ca. 800 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2000 mm<br/>description: festo tenon racket, 2 saws, 2 milling spindles,<br> incl. sliding carriage and switch cabinet WEIGHT APPROX.: CA. 800 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2000 MM
DESCRIPTION: FESTO TENON RACKET, 2 SAWS, 2 MILLING SPINDLES,
INCL. SLIDING CARRIAGE AND SWITCH CABINET
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-planing plant of ledinek superles 400 6v + 4f s80 with mechanization

used planing plant of ledinek superles entstapellung multiple caps saw and stappelmechanisirung kallfass

manufacturer: ledinek
year of construction: 2004
type: superles 400 6v + 4f-s80
condition: good, ready to use, can be visited
location: de
availability: immediately

technical data:

working dimensions:
working width: 70-400 mm
working thickness: 19-300 mm
working length: min. 2.000 mm
table height: 1000 mm
feed speed: 20-80 m / min.
* ruler is 8 mm on the feed rollers. clamping length of min. 120 mm.

drive motors
dressing shaft: 37 kw
thickness wave: 45 kw
vertical shaft left: 30 kw
vertical shaft right: 37 kw
chamfer 4 x 3 kw 12 kw
profiling shafts 2 x 30 kw 60 kw
feed: 30 kw
hub gear motor: 2.2 kw
total installed power: 262kw
all spindle with engine brake

tools:
the horizontal shaft speed: 5.000 rpm
the vertical spindle speed: 5,500 rpm
speed of roll forming waves: 6.000 rpm
chamfer mills: 9.000 rpm
vertical spindle diameter: 50 mm
tool clamping length: 150 mm

diameter of tools:
horizontal shaft: 205 mm
vertical spindle: 160-225 mm
joint diameter: 200-205 mm
profile shaft spindle 140-300 (50) mm
chamfer mills 140 / 45â° x10mm

tension decrease normally (with full working width)
dressing shaft max.: 10 mm (4 mm)
thickness shaft max.: 16 mm (5 mm)
vertical shaft left max: 16 mm (5 mm)
vertical shaft right max: 10 mm (5 mm)
chamfer size max: 6 mm / 45â°

operating voltage 400 v / 50 hz
instalierte power: 262 kw
compressed air: 6 bar
pneumatic component: festo
control cabinet according to vde,
component: siemens, klã¶ckner-mã¶ller, telemecanique

soundproof cabin of lighting, window with double glazed windows,
noise reduction about 15db
service crane in the cabin
tool grinding machine is sold

operator panel
with simatic op77b operation panel and all operator buttons. free-standing.

dust nozzle:
horizontal: 1 x 200mm, 1 x 250mm
vertical: 4 x 200mm
chamfer mills 4 x 80 mm
extraction speed: min 30 m / s

weight: 19000 kg

price on request PLANING PLANT OF LEDINEK SUPERLES 400 6V + 4F S80 WITH MECHANIZATION USED PLANING PLANT OF LEDINEK SUPERLES ENTSTAPELLUNG MULTIPLE CAPS SAW AND STAPPELMECHANISIRUNG KALLFASS MANUFACTURER: LEDINEK YEAR OF CONSTRUCTION: 2004 TYPE: SUPERLES 400 6V + 4F-S80 CONDITION: GOOD, READY TO USE, CAN BE VISITED LOCATION: DE AVAILABILITY: IMMEDIATELY TECHNICAL DATA: WORKING DIMENSIONS: WORKING WIDTH: 70-400 MM WORKING THICKNESS: 19-300 MM WORKING LENGTH: MIN. 2.000 MM TABLE HEIGHT: 1000 MM FEED SPEED: 20-80 M / MIN. * RULER IS 8 MM ON THE FEED ROLLERS. CLAMPING LENGTH OF MIN. 120 MM. DRIVE MOTORS DRESSING SHAFT: 37 KW THICKNESS WAVE: 45 KW VERTICAL SHAFT LEFT: 30 KW VERTICAL SHAFT RIGHT: 37 KW CHAMFER 4 X 3 KW 12 KW PROFILING SHAFTS 2 X 30 KW 60 KW FEED: 30 KW HUB GEAR MOTOR: 2.2 KW TOTAL INSTALLED POWER: 262KW ALL SPINDLE WITH ENGINE BRAKE TOOLS: THE HORIZONTAL SHAFT SPEED: 5.000 RPM THE VERTICAL SPINDLE SPEED: 5,500 RPM SPEED OF ROLL FORMING WAVES: 6.000 RPM CHAMFER MILLS: 9.000 RPM VERTICAL SPINDLE DIAMETER: 50 MM TOOL CLAMPING LENGTH: 150 MM DIAMETER OF TOOLS: HORIZONTAL SHAFT: 205 MM VERTICAL SPINDLE: 160-225 MM JOINT DIAMETER: 200-205 MM PROFILE SHAFT SPINDLE 140-300 (50) MM CHAMFER MILLS 140 / 45&ACIRC;&DEG; X10MM TENSION DECREASE NORMALLY (WITH FULL WORKING WIDTH) DRESSING SHAFT MAX.: 10 MM (4 MM) THICKNESS SHAFT MAX.: 16 MM (5 MM) VERTICAL SHAFT LEFT MAX: 16 MM (5 MM) VERTICAL SHAFT RIGHT MAX: 10 MM (5 MM) CHAMFER SIZE MAX: 6 MM / 45&ACIRC;&DEG; OPERATING VOLTAGE 400 V / 50 HZ INSTALIERTE POWER: 262 KW COMPRESSED AIR: 6 BAR PNEUMATIC COMPONENT: FESTO CONTROL CABINET ACCORDING TO VDE, COMPONENT: SIEMENS, KL&ATILDE;&PARA;CKNER-M&ATILDE;&PARA;LLER, TELEMECANIQUE SOUNDPROOF CABIN OF LIGHTING, WINDOW WITH DOUBLE GLAZED WINDOWS, NOISE REDUCTION ABOUT 15DB SERVICE CRANE IN THE CABIN TOOL GRINDING MACHINE IS SOLD OPERATOR PANEL WITH SIMATIC OP77B OPERATION PANEL AND ALL OPERATOR BUTTONS. FREE-STANDING. DUST NOZZLE: HORIZONTAL: 1 X 200MM, 1 X 250MM VERTICAL: 4 X 200MM CHAMFER MILLS 4 X 80 MM EXTRACTION SPEED: MIN 30 M / S WEIGHT: 19000 KG PRICE ON REQUEST
Vendedor: SN-InTec Ltd.& CO.KG
Año de construcción: usado
Precio: used machinery auction RESALE 75 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 450 x 350 x 350 mm<br/>description: 2 pieces<br> 1 x metabo sre 4350 turbotec<br> 1 x festool rs 300 q<br> with accessories<br> in case<br> WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 450 X 350 X 350 MM
DESCRIPTION: 2 PIECES
1 X METABO SRE 4350 TURBOTEC
1 X FESTOOL RS 300 Q
WITH ACCESSORIES
IN CASE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-offer these new cylinders of fa. festo, which were well mounted and have not been used.

telephone inquiries desired price vhb from quantity better rates 0176 27 44 64 14  OFFER THESE NEW CYLINDERS OF FA. FESTO, WHICH WERE WELL MOUNTED AND HAVE NOT BEEN USED. TELEPHONE INQUIRIES DESIRED PRICE VHB FROM QUANTITY BETTER RATES 0176 27 44 64 14
Vendedor: Herr Venjacob
Año de construcción: usado
Precio: 16.090 €
Ubicación: Land-: 600 mm<br/>: 3 mm<br/>: 600 x 2 mm<br/>: 80 mm<br/>: 10 nm<br/>helical gear box wattdrive (made in austria)<br/>festo pneumatic equipment<br/>servo drive and control schneider electric<br/>7", colour touchscreen schneider electric<br/>4 gear rollers drive. prevents the separation of the rollers during piloting operation for higher accuracy<br/>free feeding speed 100mt/min<br/><br/>because the application areas are always very specific for each customer and require intense counseling, we kindly ask for your inquiry in order to make you an individual offer!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/><br/>sheet width: 600 mm<br/>min. sheet thickness: 0,4 mm<br/>max. sheet thickness: 3 mm<br/>max. section: 600 x 2 mm<br/>roll Ø: 80 mm<br/>motor torque: 10 nm<br/><br/><br/><br/> : 600 MM
: 3 MM
: 600 X 2 MM
: 80 MM
: 10 NM
HELICAL GEAR BOX WATTDRIVE (MADE IN AUSTRIA)
FESTO PNEUMATIC EQUIPMENT
SERVO DRIVE AND CONTROL SCHNEIDER ELECTRIC
7", COLOUR TOUCHSCREEN SCHNEIDER ELECTRIC
4 GEAR ROLLERS DRIVE. PREVENTS THE SEPARATION OF THE ROLLERS DURING PILOTING OPERATION FOR HIGHER ACCURACY
FREE FEEDING SPEED 100MT/MIN

BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

(SAMPLE PHOTO)







SHEET WIDTH: 600 MM
MIN. SHEET THICKNESS: 0,4 MM
MAX. SHEET THICKNESS: 3 MM
MAX. SECTION: 600 X 2 MM
ROLL Ø: 80 MM
MOTOR TORQUE: 10 NM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-belt sander, festool type bs 105 e, 1,400 w. BELT SANDER, FESTOOL TYPE BS 105 E, 1,400 W.
Vendedor: OCHMANN Holzbearbeitungsmaschinen
Año de construcción: usado
Precio: 14.340 €
Ubicación: Land-: 200 mm<br/>: 4 mm<br/>: 200 x 3 mm<br/>: 80 mm<br/>: 8 nm<br/>helical gear box wattdrive (made in austria)<br/>festo pneumatic equipment<br/>servo drive and control schneider electric<br/>7", colour touchscreen schneider electric<br/>4 gear rollers drive. prevents the separation of the rollers during piloting operation for higher accuracy<br/>free feeding speed 100mt/min<br/><br/>because the application areas are always very specific for each customer and require intense counseling, we kindly ask for your inquiry in order to make you an individual offer!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/><br/>sheet width: 200 mm<br/>min. sheet thickness: 0,4 mm<br/>max. sheet thickness: 4 mm<br/>max. section: 200 x 3 mm<br/>roll Ø: 80 mm<br/>motor torque: 8 nm<br/><br/><br/><br/> : 200 MM
: 4 MM
: 200 X 3 MM
: 80 MM
: 8 NM
HELICAL GEAR BOX WATTDRIVE (MADE IN AUSTRIA)
FESTO PNEUMATIC EQUIPMENT
SERVO DRIVE AND CONTROL SCHNEIDER ELECTRIC
7", COLOUR TOUCHSCREEN SCHNEIDER ELECTRIC
4 GEAR ROLLERS DRIVE. PREVENTS THE SEPARATION OF THE ROLLERS DURING PILOTING OPERATION FOR HIGHER ACCURACY
FREE FEEDING SPEED 100MT/MIN

BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

(SAMPLE PHOTO)







SHEET WIDTH: 200 MM
MIN. SHEET THICKNESS: 0,4 MM
MAX. SHEET THICKNESS: 4 MM
MAX. SECTION: 200 X 3 MM
ROLL Ø: 80 MM
MOTOR TORQUE: 8 NM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-extraction arm festo asa2500 as wall swing arm

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

swivel arm with power supply unit and druckluftexcenterschleifer
aluminium tube approx. 1700 x 50mm
flexible connection hose 50 mm
height approx. 1300 mm power unit of uk port to uk boom
power supply unit with 2 sockets and 5 compressed air connections, as well as pressure reducer and oiler
new ias2 connection unit
ias2 tube green
grinder festo lex2 150/3
very good condition of vocational school

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EXTRACTION ARM FESTO ASA2500 AS WALL SWING ARM THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. SWIVEL ARM WITH POWER SUPPLY UNIT AND DRUCKLUFTEXCENTERSCHLEIFER ALUMINIUM TUBE APPROX. 1700 X 50MM FLEXIBLE CONNECTION HOSE 50 MM HEIGHT APPROX. 1300 MM POWER UNIT OF UK PORT TO UK BOOM POWER SUPPLY UNIT WITH 2 SOCKETS AND 5 COMPRESSED AIR CONNECTIONS, AS WELL AS PRESSURE REDUCER AND OILER NEW IAS2 CONNECTION UNIT IAS2 TUBE GREEN GRINDER FESTO LEX2 150/3 VERY GOOD CONDITION OF VOCATIONAL SCHOOL PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 14.920 €
Ubicación: Land-: 300 mm<br/>: 3 mm<br/>: 300 x 3 mm<br/>: 80 mm<br/>: 8 nm<br/>helical gear box wattdrive (made in austria)<br/>festo pneumatic equipment<br/>servo drive and control schneider electric<br/>7", colour touchscreen schneider electric<br/>4 gear rollers drive. prevents the separation of the rollers during piloting operation for higher accuracy<br/>free feeding speed 100mt/min<br/><br/>because the application areas are always very specific for each customer and require intense counseling, we kindly ask for your inquiry in order to make you an individual offer!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/><br/>sheet width: 300 mm<br/>min. sheet thickness: 0,4 mm<br/>max. sheet thickness: 3 mm<br/>max. section: 300 x 3 mm<br/>roll Ø: 80 mm<br/>motor torque: 8 nm<br/><br/><br/><br/> : 300 MM
: 3 MM
: 300 X 3 MM
: 80 MM
: 8 NM
HELICAL GEAR BOX WATTDRIVE (MADE IN AUSTRIA)
FESTO PNEUMATIC EQUIPMENT
SERVO DRIVE AND CONTROL SCHNEIDER ELECTRIC
7", COLOUR TOUCHSCREEN SCHNEIDER ELECTRIC
4 GEAR ROLLERS DRIVE. PREVENTS THE SEPARATION OF THE ROLLERS DURING PILOTING OPERATION FOR HIGHER ACCURACY
FREE FEEDING SPEED 100MT/MIN

BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

(SAMPLE PHOTO)







SHEET WIDTH: 300 MM
MIN. SHEET THICKNESS: 0,4 MM
MAX. SHEET THICKNESS: 3 MM
MAX. SECTION: 300 X 3 MM
ROLL Ø: 80 MM
MOTOR TORQUE: 8 NM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.000 €
Ubicación: Land-extraction arm festo asa2500 as wall swing arm

thank you, that you are interested in our offers. if you have specific questions, please use the telephone, personal interview questions can clarify faster than by mail.

swivel arm with power supply unit and druckluftexcenterschleifer
aluminium tube approx. 1700 x 50mm
flexible connection hose 50 mm
height approx. 1300 mm power unit of uk port to uk boom
power supply unit with 2 sockets and 5 compressed air connections, as well as pressure reducer and oiler
new ias2 connection unit
ias2 hose blue
grinder festo let 150-7
the suspension on the swivel unit was obviously changed and new welded, see photos
very good condition of vocational school

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EXTRACTION ARM FESTO ASA2500 AS WALL SWING ARM THANK YOU, THAT YOU ARE INTERESTED IN OUR OFFERS. IF YOU HAVE SPECIFIC QUESTIONS, PLEASE USE THE TELEPHONE, PERSONAL INTERVIEW QUESTIONS CAN CLARIFY FASTER THAN BY MAIL. SWIVEL ARM WITH POWER SUPPLY UNIT AND DRUCKLUFTEXCENTERSCHLEIFER ALUMINIUM TUBE APPROX. 1700 X 50MM FLEXIBLE CONNECTION HOSE 50 MM HEIGHT APPROX. 1300 MM POWER UNIT OF UK PORT TO UK BOOM POWER SUPPLY UNIT WITH 2 SOCKETS AND 5 COMPRESSED AIR CONNECTIONS, AS WELL AS PRESSURE REDUCER AND OILER NEW IAS2 CONNECTION UNIT IAS2 HOSE BLUE GRINDER FESTO LET 150-7 THE SUSPENSION ON THE SWIVEL UNIT WAS OBVIOUSLY CHANGED AND NEW WELDED, SEE PHOTOS VERY GOOD CONDITION OF VOCATIONAL SCHOOL PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Precio: 15.500 €
Ubicación: Land-: 400 mm<br/>: 3 mm<br/>: 400 x 3 mm<br/>: 80 mm<br/>: 10 nm<br/>helical gear box wattdrive (made in austria)<br/>festo pneumatic equipment<br/>servo drive and control schneider electric<br/>7", colour touchscreen schneider electric<br/>4 gear rollers drive. prevents the separation of the rollers during piloting operation for higher accuracy<br/>free feeding speed 100mt/min<br/><br/>because the application areas are always very specific for each customer and require intense counseling, we kindly ask for your inquiry in order to make you an individual offer!<br/><br/>(sample photo)<br/><br/><br/><br/><br/><br/><br/><br/>sheet width: 400 mm<br/>min. sheet thickness: 0,4 mm<br/>max. sheet thickness: 3 mm<br/>max. section: 400 x 3 mm<br/>roll Ø: 80 mm<br/>motor torque: 10 nm<br/><br/><br/><br/> : 400 MM
: 3 MM
: 400 X 3 MM
: 80 MM
: 10 NM
HELICAL GEAR BOX WATTDRIVE (MADE IN AUSTRIA)
FESTO PNEUMATIC EQUIPMENT
SERVO DRIVE AND CONTROL SCHNEIDER ELECTRIC
7", COLOUR TOUCHSCREEN SCHNEIDER ELECTRIC
4 GEAR ROLLERS DRIVE. PREVENTS THE SEPARATION OF THE ROLLERS DURING PILOTING OPERATION FOR HIGHER ACCURACY
FREE FEEDING SPEED 100MT/MIN

BECAUSE THE APPLICATION AREAS ARE ALWAYS VERY SPECIFIC FOR EACH CUSTOMER AND REQUIRE INTENSE COUNSELING, WE KINDLY ASK FOR YOUR INQUIRY IN ORDER TO MAKE YOU AN INDIVIDUAL OFFER!

(SAMPLE PHOTO)







SHEET WIDTH: 400 MM
MIN. SHEET THICKNESS: 0,4 MM
MAX. SHEET THICKNESS: 3 MM
MAX. SECTION: 400 X 3 MM
ROLL Ø: 80 MM
MOTOR TORQUE: 10 NM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-qty.1 second-hand robot sawing line
mfc.:	fill gesellschaft m.b.h.		built:	2007
sub-suppliers:	pneumatic – festo, bosch		hydraulic – bosch
	gear motors, servo motors, control units – sew & siemens	robot - kuka
	saw motors – perske		lubrication unit – vogel  
vibrating channels – jöst        control system 840d – siemens	
basic data of the designed sawing line
different cutting sequences:	90° - chop cuttings	cuts with parallel miter
cuts with opposite miter	cuts with turned profiles – 3d-layer cuts – left & right parts
saw blade change:	approx. 5 min.
loose chips are blown out of the sawn profiles via nozzles and air curtains in automatic mode.
profile definition		profile length:	max. 7200 mm
	finished length:	up to 1750 mm at double miter	80-2500 mm at chop cuttings
	angles: 	0° - 60°		profile height:		20 – 150 mm (chop cuttings)
frame & layer dimensions		in the frame:  1200 mm	to the saw:  1000 mm
	stack in defined stacking boxes	separate layers or reduced width to saw
short & long length		short length:	80 – 499 mm	transverse transport for destacking
	up to 500 mm 	along then cross transport
clamping rest		max. length:	175 mm to aim for 150 mm
transverse transport	- short profiles are advanced by the following material
-	 in this case, the transverse transport is arranged movable, so that there is enough free space for sawing available
permanently sound pressure level	approx. 80 db(a) - measured in front of the saw line
 QTY.1 SECOND-HAND ROBOT SAWING LINE MFC.: FILL GESELLSCHAFT M.B.H. BUILT: 2007 SUB-SUPPLIERS: PNEUMATIC – FESTO, BOSCH HYDRAULIC – BOSCH GEAR MOTORS, SERVO MOTORS, CONTROL UNITS – SEW & SIEMENS ROBOT - KUKA SAW MOTORS – PERSKE LUBRICATION UNIT – VOGEL VIBRATING CHANNELS – JöST CONTROL SYSTEM 840D – SIEMENS BASIC DATA OF THE DESIGNED SAWING LINE DIFFERENT CUTTING SEQUENCES: 90° - CHOP CUTTINGS CUTS WITH PARALLEL MITER CUTS WITH OPPOSITE MITER CUTS WITH TURNED PROFILES – 3D-LAYER CUTS – LEFT & RIGHT PARTS SAW BLADE CHANGE: APPROX. 5 MIN. LOOSE CHIPS ARE BLOWN OUT OF THE SAWN PROFILES VIA NOZZLES AND AIR CURTAINS IN AUTOMATIC MODE. PROFILE DEFINITION PROFILE LENGTH: MAX. 7200 MM FINISHED LENGTH: UP TO 1750 MM AT DOUBLE MITER 80-2500 MM AT CHOP CUTTINGS ANGLES: 0° - 60° PROFILE HEIGHT: 20 – 150 MM (CHOP CUTTINGS) FRAME & LAYER DIMENSIONS IN THE FRAME: 1200 MM TO THE SAW: 1000 MM STACK IN DEFINED STACKING BOXES SEPARATE LAYERS OR REDUCED WIDTH TO SAW SHORT & LONG LENGTH SHORT LENGTH: 80 – 499 MM TRANSVERSE TRANSPORT FOR DESTACKING UP TO 500 MM ALONG THEN CROSS TRANSPORT CLAMPING REST MAX. LENGTH: 175 MM TO AIM FOR 150 MM TRANSVERSE TRANSPORT - SHORT PROFILES ARE ADVANCED BY THE FOLLOWING MATERIAL - IN THIS CASE, THE TRANSVERSE TRANSPORT IS ARRANGED MOVABLE, SO THAT THERE IS ENOUGH FREE SPACE FOR SAWING AVAILABLE PERMANENTLY SOUND PRESSURE LEVEL APPROX. 80 DB(A) - MEASURED IN FRONT OF THE SAW LINE
Vendedor: MET-TECH GMBH
Año de construcción: usado
Precio: used machinery auction RESALE 30 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 400 x 200 x 200 mm<br/>description: up to 10000 oscillations per minute. power 450 w. power supply 230 v - 50/60 hz. see photo WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 200 X 200 MM
DESCRIPTION: UP TO 10000 OSCILLATIONS PER MINUTE. POWER 450 W. POWER SUPPLY 230 V - 50/60 HZ. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 200 €
Ubicación: Land-type	standard 1654
number of wheels (pcs.) 3
feeding speed 2,5 – 30 m/min.
motor power	0,5 kw
diameter of wheels 	90 mm
made in germany 	

 TYPE STANDARD 1654 NUMBER OF WHEELS (PCS.) 3 FEEDING SPEED 2,5 – 30 M/MIN. MOTOR POWER 0,5 KW DIAMETER OF WHEELS 90 MM MADE IN GERMANY
Vendedor: MEDIENOS STAKLES, UAB
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 750 kg<br/>dimensions (l x w x h) approx.: 1200 x 1200 x 1900 mm<br/>description: 4/5.5 hp, machine number 1584, 2800, 4500, 5600, 6000, 9000 and 12000 rpm, manually swivelling and height-adjustable 5° to 45°, feed unit festo with 3 rollers WEIGHT APPROX.: 750 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 1200 X 1900 MM
DESCRIPTION: 4/5.5 HP, MACHINE NUMBER 1584, 2800, 4500, 5600, 6000, 9000 AND 12000 RPM, MANUALLY SWIVELLING AND HEIGHT-ADJUSTABLE 5° TO 45°, FEED UNIT FESTO WITH 3 ROLLERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-we sell fanuc type: m-6ib, production year 2005 with r-j3ib b driver with 61100 standard hours.
the robot is in good condition (maintenance service from preventive maintenance available).
we supply accessories to him:

1. stand
2. schunk pgn + 80/1 parallel gripper
3. valve terminal festo cpv10-vi-10p-10-c4-mp-n-y-2j2l + rw controlled externally from the plc
4. documentation WE SELL FANUC TYPE: M-6IB, PRODUCTION YEAR 2005 WITH R-J3IB B DRIVER WITH 61100 STANDARD HOURS. THE ROBOT IS IN GOOD CONDITION (MAINTENANCE SERVICE FROM PREVENTIVE MAINTENANCE AVAILABLE). WE SUPPLY ACCESSORIES TO HIM: 1. STAND 2. SCHUNK PGN + 80/1 PARALLEL GRIPPER 3. VALVE TERMINAL FESTO CPV10-VI-10P-10-C4-MP-N-Y-2J2L + RW CONTROLLED EXTERNALLY FROM THE PLC 4. DOCUMENTATION
Vendedor: BASTA machinery
Año de construcción: usado
Precio: 30 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 110 €
Ubicación: Land-double-acting pneumatic cylinder DOUBLE-ACTING PNEUMATIC CYLINDER
Vendedor: Wensauer-Edelstahl-Vertrieb-UG
Año de construcción: usado
Ubicación: Land-multi edge magazine for edge banding machines\r\nmake: isas\r\ntype: performance\r\n\r\nlength approx. 2000mm\r\nwidth approx. 2000mm\r\n\r\nmax. edge coil-Ø: 760mm\r\nmax. edge height: 28mm\r\nmax. edge thickness: 2mm\r\n\r\nconsisting of:\r\n- base frame\r\nwith movable thrust plates for take of edge coils, central stored, \r\n1x side shaft for quick supply and higher edge coils\r\n\r\n- upper frame\r\n30 mechanical clamping lever\r\n2 festo axes system for edge systems and loosen the clamping\r\ndrive with servo motor frequency controlled\r\n2 transport rollers central splitted and stored for edge transport forward/backward\r\n\r\n- strip guidance / hopper\r\n\r\n- transfer plate to the machine, special construction\r\n\r\n- control technique\r\nswitch box on the machine, wired\r\nsps control\r\n4 frequency inverter in the switch box\r\npotential free contacts for previous machine\r\n\r\n- display and operator surface 1\r\ntouch panel tp 615 lc fix mounted at the edg magazine,\r\nworking memory 256 mb, application memory 128 mb\r\n\r\n- display and operator surface 1\r\nvia 3tec standard (software for edge- and list management)\r\n\r\ncompressed air supply  6 bar\r\n\r\n- software 3 tec (own developed)\r\nproductions control\r\nlist entering of edge (code) possible,\r\negde pre-selection possible,\r\nedge change at pc,\r\ndisplaying of errors and warnings,\r\nhand function for output switch functions\r\nshaft management\r\nexpanding for automatical process in the named order of production\r\n(quantity: 1 piece) via scanner-interface\r\noperation mix possible\r\n\r\noptional available:\r\n- 60-fold edge magazine \r\nlenght: approx. 2700mm\r\nwidth: approx. 2700mm\r\nupper frame with 60 mechanical clamping levers\r\n\r\n- 90-fold edge magazine\r\nlength approx. 3900mm\r\nwidth approx. 2500mm\r\nupper frame with 90 mechanical clamping levers\r\n\r\nvideo - englisch version >>> MULTI EDGE MAGAZINE FOR EDGE BANDING MACHINES\R\NMAKE: ISAS\R\NTYPE: PERFORMANCE\R\N\R\NLENGTH APPROX. 2000MM\R\NWIDTH APPROX. 2000MM\R\N\R\NMAX. EDGE COIL-Ø: 760MM\R\NMAX. EDGE HEIGHT: 28MM\R\NMAX. EDGE THICKNESS: 2MM\R\N\R\NCONSISTING OF:\R\N- BASE FRAME\R\NWITH MOVABLE THRUST PLATES FOR TAKE OF EDGE COILS, CENTRAL STORED, \R\N1X SIDE SHAFT FOR QUICK SUPPLY AND HIGHER EDGE COILS\R\N\R\N- UPPER FRAME\R\N30 MECHANICAL CLAMPING LEVER\R\N2 FESTO AXES SYSTEM FOR EDGE SYSTEMS AND LOOSEN THE CLAMPING\R\NDRIVE WITH SERVO MOTOR FREQUENCY CONTROLLED\R\N2 TRANSPORT ROLLERS CENTRAL SPLITTED AND STORED FOR EDGE TRANSPORT FORWARD/BACKWARD\R\N\R\N- STRIP GUIDANCE / HOPPER\R\N\R\N- TRANSFER PLATE TO THE MACHINE, SPECIAL CONSTRUCTION\R\N\R\N- CONTROL TECHNIQUE\R\NSWITCH BOX ON THE MACHINE, WIRED\R\NSPS CONTROL\R\N4 FREQUENCY INVERTER IN THE SWITCH BOX\R\NPOTENTIAL FREE CONTACTS FOR PREVIOUS MACHINE\R\N\R\N- DISPLAY AND OPERATOR SURFACE 1\R\NTOUCH PANEL TP 615 LC FIX MOUNTED AT THE EDG MAGAZINE,\R\NWORKING MEMORY 256 MB, APPLICATION MEMORY 128 MB\R\N\R\N- DISPLAY AND OPERATOR SURFACE 1\R\NVIA 3TEC STANDARD (SOFTWARE FOR EDGE- AND LIST MANAGEMENT)\R\N\R\NCOMPRESSED AIR SUPPLY 6 BAR\R\N\R\N- SOFTWARE 3 TEC (OWN DEVELOPED)\R\NPRODUCTIONS CONTROL\R\NLIST ENTERING OF EDGE (CODE) POSSIBLE,\R\NEGDE PRE-SELECTION POSSIBLE,\R\NEDGE CHANGE AT PC,\R\NDISPLAYING OF ERRORS AND WARNINGS,\R\NHAND FUNCTION FOR OUTPUT SWITCH FUNCTIONS\R\NSHAFT MANAGEMENT\R\NEXPANDING FOR AUTOMATICAL PROCESS IN THE NAMED ORDER OF PRODUCTION\R\N(QUANTITY: 1 PIECE) VIA SCANNER-INTERFACE\R\NOPERATION MIX POSSIBLE\R\N\R\NOPTIONAL AVAILABLE:\R\N- 60-FOLD EDGE MAGAZINE \R\NLENGHT: APPROX. 2700MM\R\NWIDTH: APPROX. 2700MM\R\NUPPER FRAME WITH 60 MECHANICAL CLAMPING LEVERS\R\N\R\N- 90-FOLD EDGE MAGAZINE\R\NLENGTH APPROX. 3900MM\R\NWIDTH APPROX. 2500MM\R\NUPPER FRAME WITH 90 MECHANICAL CLAMPING LEVERS\R\N\R\NVIDEO - ENGLISCH VERSION >>>
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-this is a complete line delivered by malek in year 2013. the line has been very little operated and is still installed and powered. it has separate outside cleaning machine and two separate filling lines both with 6 active cleaning station  and 2 active filling preparation stations. this line can fill 30 liters and 50 liters aluminum keg with s-fitting at capacity of 120 kph. control plcs are siemens logo and s7 type and pneumatic valves are festo gear motors are sew drives. equipment is in good condition 
 
list of equipment with technical data:
 
•	gravity roller conveyors       
•	hinged slat chain conveyors 
•	faulty keg rejection unit
•	full keg turner,  capacity up to 240 kegs/h. 
•	external cleaner type aw-l-v-dbh-n-380           
•	pre-cleaner vor
•	cleaning and filling machine variomaster  6r/2sv/2f
•	support / cip  tanks 4 x 1000 liters for hot water, mixed water, caustic and acid
•	keg weighing unit
•	capper for snap caps
•	camera cap check
  THIS IS A COMPLETE LINE DELIVERED BY MALEK IN YEAR 2013. THE LINE HAS BEEN VERY LITTLE OPERATED AND IS STILL INSTALLED AND POWERED. IT HAS SEPARATE OUTSIDE CLEANING MACHINE AND TWO SEPARATE FILLING LINES BOTH WITH 6 ACTIVE CLEANING STATION AND 2 ACTIVE FILLING PREPARATION STATIONS. THIS LINE CAN FILL 30 LITERS AND 50 LITERS ALUMINUM KEG WITH S-FITTING AT CAPACITY OF 120 KPH. CONTROL PLCS ARE SIEMENS LOGO AND S7 TYPE AND PNEUMATIC VALVES ARE FESTO GEAR MOTORS ARE SEW DRIVES. EQUIPMENT IS IN GOOD CONDITION LIST OF EQUIPMENT WITH TECHNICAL DATA: • GRAVITY ROLLER CONVEYORS • HINGED SLAT CHAIN CONVEYORS • FAULTY KEG REJECTION UNIT • FULL KEG TURNER, CAPACITY UP TO 240 KEGS/H. • EXTERNAL CLEANER TYPE AW-L-V-DBH-N-380 • PRE-CLEANER VOR • CLEANING AND FILLING MACHINE VARIOMASTER 6R/2SV/2F • SUPPORT / CIP TANKS 4 X 1000 LITERS FOR HOT WATER, MIXED WATER, CAUSTIC AND ACID • KEG WEIGHING UNIT • CAPPER FOR SNAP CAPS • CAMERA CAP CHECK
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-ship building plant

(movable shelters/goliath gantry cranes/gantry cranes

overhead cranes/welders/paint room)

 

1. shot & paint room

make:koway(korea)

year:2002

1)   air blast unit  × 3set

2)      ?776 × (h) × 2300m/m

2 gantry crane x2 units

make:dui(korea)

year:2002

cap : 20ton

double girder

span : 28m

lift : 15m

runway rail : 150m(37kg/m)

 

5. movable shelter

make:dui(korea)

year:2002

- dim : (l)25 × (w)40 × b77(h)12m

 
6 movable shelter

make:dui(korea)

year:2002

-  dim : (l)25×(w)25×(h)12m

7 grand p.e.system

make:dui(korea)

year:2002

1)   block lifter : 80set (cap : 300ton )

2)   esclating ladder :30set

cap : 200ton

    strorke : 250m/m

    pressure : 700kg/?(max)


4) gondola ? moviable equipment : 14set

    cap : 450kg

5) snatch block : 4set

    cap : 100ton × 2ea

    cap : 80ton × 2ea

8 a type carrier x70sets

 make:faintech(korea)

year:2002

9 goliath gantry crane

make:samsung(korea)

year:2002

total hoisting cap : 250ton

rail span : 81m 2003.7

runway rail : 330m

number of girder : single

- hoisting cap

   upper trolley : 2 × 125ton

   lower trolley : 1 × 150ton

   service crane : 5ton

-  speed

o hoisting

   upper trolley : 6m/min

   lower trolley : 6m/min

   service crane : 10m/min

o traveling

   upper trolley : 30m/min

   lower trolley : 30m/min

   service crane : 10m/min

   gantry : 25m/min

o hook traveling

   upper trolley : 1.0m/min

o hoisting

   upper trolley : 160kw × 2ea

   lower trolley : 200kw × 1ea

   service crane : 11kw × 1ea

o traveling

   upper trolley : 15kw × 4ea

   lower trolley : 11kw × 4ea

   service crance : 0.5kw × 2ea

   gantry : 15kw × 10ea

o hook traveling

   upper trolley : 18.5kw

- lift

  upper troller : 55m

  lower troller : 50m

  service crane : 72.7m

- power : 6.6kv 60hz 3p

- electric supply

  cap : 1700kva

  tr : 1000kva × 1ea

        700kva × 1ea

        10kva × 1ea

  a.s.s : 25.8kv 200a × 1ea

  m.o.f : 22.9kv 50a

  l.a

  c.o.s : 100af

10 titan elevating transporter

make:lineho(korea)

year:2002

cap : 320ton

payload : app.  322,000kg

total weight : app.  396,000kg

swivel axleload : app.  33,000kg
internal degree of lock  : app.  0m/m

electric installation : 24vdc

12 air blast room

make:koway(korea)

year:2002

air blast unit

    970? × 2760(h)mm

13 gantry crane

make:dui(korea)

year:2004

cap : 30t

double girder

lift : 24.7m

span : 43m

run away rail : 150m (37kg/m)

 

14 air compressor

make:hankook(korea)

year;2003

1) compressor : 4set

16 dehumdifier

make:sinsung(korea)

year;2003

17 dehumdifier

make:hankuk techno(korea)

year;2005

18 hoist crane x2sets

make:dain(korea)

year:2005

single girder

hoist : 2t

span : 16m

rail : 24m

 

19 hoist crane x2sets

make:idm(korea)

year:2003

double girder

hoist : 5t

span : 23m

rail : 24m

 


26 goiiath gantry crane

make:dui(korea)

year;2006

300 ton  (150/150×150 ton)

double girder

span : 52m

lift : 50m

travering distance : 194m

27 mega block supporter x110sets

make:juan(korea)

year;2005

weight: 1.6 ton

support height : 1.5~1.8m

 

28 welder x30sets

 make:hyosung(korea)

year:2006
29 titan elevating transporter(600ton)

make:lineho(korea)

year:2011

- 

 
 - 34 .co2/mag arc welder x120sets

make:daewoo(korea)

year:2002
38 movable shelter

make:dui(korea)

year:2002

 - dim : (l)25 × (w)40 × (h)12m

min column : h-beam 700 × 300m/m

                   400 × 400m/m

                  200 × 100m/m

   roof/wall:color steel plate

 - cable reel

 
39  movable shelter

make:dui(korea)

year:2002

50 gantry crane.  (30t × 43m)

make:dui(korea)

year:2004

 trolley ass'y

  crab 1ea

girder ass'y

  double 2set

saddle ass'y (master including)

  1. 5kw 2set

leg ass'y

main & t/l panel(soft starts):800 × 1400

t/s electric (festoon type)
test load main 30ton


 bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567     
  SHIP BUILDING PLANT (MOVABLE SHELTERS/GOLIATH GANTRY CRANES/GANTRY CRANES OVERHEAD CRANES/WELDERS/PAINT ROOM) 1. SHOT & PAINT ROOM MAKE:KOWAY(KOREA) YEAR:2002 1) AIR BLAST UNIT × 3SET 2) ?776 × (H) × 2300M/M 2 GANTRY CRANE X2 UNITS MAKE:DUI(KOREA) YEAR:2002 CAP : 20TON DOUBLE GIRDER SPAN : 28M LIFT : 15M RUNWAY RAIL : 150M(37KG/M) 5. MOVABLE SHELTER MAKE:DUI(KOREA) YEAR:2002 - DIM : (L)25 × (W)40 × B77(H)12M 6 MOVABLE SHELTER MAKE:DUI(KOREA) YEAR:2002 - DIM : (L)25×(W)25×(H)12M 7 GRAND P.E.SYSTEM MAKE:DUI(KOREA) YEAR:2002 1) BLOCK LIFTER : 80SET (CAP : 300TON ) 2) ESCLATING LADDER :30SET CAP : 200TON STRORKE : 250M/M PRESSURE : 700KG/?(MAX) 4) GONDOLA ? MOVIABLE EQUIPMENT : 14SET CAP : 450KG 5) SNATCH BLOCK : 4SET CAP : 100TON × 2EA CAP : 80TON × 2EA 8 A TYPE CARRIER X70SETS MAKE:FAINTECH(KOREA) YEAR:2002 9 GOLIATH GANTRY CRANE MAKE:SAMSUNG(KOREA) YEAR:2002 TOTAL HOISTING CAP : 250TON RAIL SPAN : 81M 2003.7 RUNWAY RAIL : 330M NUMBER OF GIRDER : SINGLE - HOISTING CAP UPPER TROLLEY : 2 × 125TON LOWER TROLLEY : 1 × 150TON SERVICE CRANE : 5TON - SPEED O HOISTING UPPER TROLLEY : 6M/MIN LOWER TROLLEY : 6M/MIN SERVICE CRANE : 10M/MIN O TRAVELING UPPER TROLLEY : 30M/MIN LOWER TROLLEY : 30M/MIN SERVICE CRANE : 10M/MIN GANTRY : 25M/MIN O HOOK TRAVELING UPPER TROLLEY : 1.0M/MIN O HOISTING UPPER TROLLEY : 160KW × 2EA LOWER TROLLEY : 200KW × 1EA SERVICE CRANE : 11KW × 1EA O TRAVELING UPPER TROLLEY : 15KW × 4EA LOWER TROLLEY : 11KW × 4EA SERVICE CRANCE : 0.5KW × 2EA GANTRY : 15KW × 10EA O HOOK TRAVELING UPPER TROLLEY : 18.5KW - LIFT UPPER TROLLER : 55M LOWER TROLLER : 50M SERVICE CRANE : 72.7M - POWER : 6.6KV 60HZ 3P - ELECTRIC SUPPLY CAP : 1700KVA TR : 1000KVA × 1EA 700KVA × 1EA 10KVA × 1EA A.S.S : 25.8KV 200A × 1EA M.O.F : 22.9KV 50A L.A C.O.S : 100AF 10 TITAN ELEVATING TRANSPORTER MAKE:LINEHO(KOREA) YEAR:2002 CAP : 320TON PAYLOAD : APP. 322,000KG TOTAL WEIGHT : APP. 396,000KG SWIVEL AXLELOAD : APP. 33,000KG INTERNAL DEGREE OF LOCK : APP. 0M/M ELECTRIC INSTALLATION : 24VDC 12 AIR BLAST ROOM MAKE:KOWAY(KOREA) YEAR:2002 AIR BLAST UNIT 970? × 2760(H)MM 13 GANTRY CRANE MAKE:DUI(KOREA) YEAR:2004 CAP : 30T DOUBLE GIRDER LIFT : 24.7M SPAN : 43M RUN AWAY RAIL : 150M (37KG/M) 14 AIR COMPRESSOR MAKE:HANKOOK(KOREA) YEAR;2003 1) COMPRESSOR : 4SET 16 DEHUMDIFIER MAKE:SINSUNG(KOREA) YEAR;2003 17 DEHUMDIFIER MAKE:HANKUK TECHNO(KOREA) YEAR;2005 18 HOIST CRANE X2SETS MAKE:DAIN(KOREA) YEAR:2005 SINGLE GIRDER HOIST : 2T SPAN : 16M RAIL : 24M 19 HOIST CRANE X2SETS MAKE:IDM(KOREA) YEAR:2003 DOUBLE GIRDER HOIST : 5T SPAN : 23M RAIL : 24M 26 GOIIATH GANTRY CRANE MAKE:DUI(KOREA) YEAR;2006 300 TON (150/150×150 TON) DOUBLE GIRDER SPAN : 52M LIFT : 50M TRAVERING DISTANCE : 194M 27 MEGA BLOCK SUPPORTER X110SETS MAKE:JUAN(KOREA) YEAR;2005 WEIGHT: 1.6 TON SUPPORT HEIGHT : 1.5~1.8M 28 WELDER X30SETS MAKE:HYOSUNG(KOREA) YEAR:2006 29 TITAN ELEVATING TRANSPORTER(600TON) MAKE:LINEHO(KOREA) YEAR:2011 - - 34 .CO2/MAG ARC WELDER X120SETS MAKE:DAEWOO(KOREA) YEAR:2002 38 MOVABLE SHELTER MAKE:DUI(KOREA) YEAR:2002 - DIM : (L)25 × (W)40 × (H)12M MIN COLUMN : H-BEAM 700 × 300M/M 400 × 400M/M 200 × 100M/M ROOF/WALL:COLOR STEEL PLATE - CABLE REEL 39 MOVABLE SHELTER MAKE:DUI(KOREA) YEAR:2002 50 GANTRY CRANE. (30T × 43M) MAKE:DUI(KOREA) YEAR:2004 TROLLEY ASS'Y CRAB 1EA GIRDER ASS'Y DOUBLE 2SET SADDLE ASS'Y (MASTER INCLUDING) 1. 5KW 2SET LEG ASS'Y MAIN & T/L PANEL(SOFT STARTS):800 × 1400 T/S ELECTRIC (FESTOON TYPE) TEST LOAD MAIN 30TON BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 2.250 €
Ubicación: Land-used pneumatic press 4 kn

-pressing force 4 kn (0.4 to)
-pneumatic cylinder make festo
-pneumatic two-hand control - press plate made in 4 guide pillars
-work surface between guide columns 200 * 220 mm
-machine table made of aluminium profiles and pa plate 600 * 600 * 60 mm
-3-sided walls from plexiglas
-total weight approx. 70 kg

suitable for stamping or embossing tools or plate bonding.

USED PNEUMATIC PRESS 4 KN -PRESSING FORCE 4 KN (0.4 TO) -PNEUMATIC CYLINDER MAKE FESTO -PNEUMATIC TWO-HAND CONTROL - PRESS PLATE MADE IN 4 GUIDE PILLARS -WORK SURFACE BETWEEN GUIDE COLUMNS 200 * 220 MM -MACHINE TABLE MADE OF ALUMINIUM PROFILES AND PA PLATE 600 * 600 * 60 MM -3-SIDED WALLS FROM PLEXIGLAS -TOTAL WEIGHT APPROX. 70 KG SUITABLE FOR STAMPING OR EMBOSSING TOOLS OR PLATE BONDING.
Vendedor: Reitz Technik GmbH
Año de construcción: usado
Precio: 130 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.428 €
Ubicación: Land-to ensure they get the pictured accessories.

technical data:
brand: festo

type: za 101

crosscut saw 2.5 hp

cutting height 110 mm

2 x saw horizontal 30 mm spindle
milling cutter 1 x rear spindle 40 mm 150 mm clamp height
3 x suction nozzle 120 mm ã? TO ENSURE THEY GET THE PICTURED ACCESSORIES. TECHNICAL DATA: BRAND: FESTO TYPE: ZA 101 CROSSCUT SAW 2.5 HP CUTTING HEIGHT 110 MM 2 X SAW HORIZONTAL 30 MM SPINDLE MILLING CUTTER 1 X REAR SPINDLE 40 MM 150 MM CLAMP HEIGHT 3 X SUCTION NOZZLE 120 MM &ATILDE;?
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: 30 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-eyeletting machine hang 103lo<br/>  <br/>  serial-no. 27977<br/>  pneumatic operation festo (dnu 50 cylinder)<br/>  <br/>  -available immediately -<br/>  -can be inspect-<br/>  -on stock - can be test- EYELETTING MACHINE HANG 103LO

SERIAL-NO. 27977
PNEUMATIC OPERATION FESTO (DNU 50 CYLINDER)

-AVAILABLE IMMEDIATELY -
-CAN BE INSPECT-
-ON STOCK - CAN BE TEST-
Vendedor: F1-TRADE GmbH
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 950 €
Ubicación: Land--circular saw 1.5 kw<br/>  -saw blades-dm. max 400 mm<br/>  -cutting height of 125 mm<br/>  -milling motor 5.5 kw<br/>  -tool-dm. max 420 mm<br/>  -spindle-dm. 40 mm<br/>  -festo stop system -CIRCULAR SAW 1.5 KW
-SAW BLADES-DM. MAX 400 MM
-CUTTING HEIGHT OF 125 MM
-MILLING MOTOR 5.5 KW
-TOOL-DM. MAX 420 MM
-SPINDLE-DM. 40 MM
-FESTO STOP SYSTEM
Vendedor: MSH-nrw GmbH
Año de construcción: usado
Precio: 20 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 290 €
Ubicación: Land-ast flick drill festo

for wall mounting
built in 1967
weight approx. 140 kg
l x w x h: 80 x 60 x 70 cm

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      
       AST FLICK DRILL FESTO FOR WALL MOUNTING BUILT IN 1967 WEIGHT APPROX. 140 KG L X W X H: 80 X 60 X 70 CM THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: 25 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 3.400 €
Ubicación: Land-cnc controlled 3 axle system<br/>  <br/>  a 3 axis system for various aufgaben(wie fraesen, bohren, gravieren, handhabung, lasern, laborarbeiten, etc.)<br/>  x-y axes are created by ief. traverse paths x 200 mm, y: 320 mm<br/>  z axis (festo) operated pneumatically. stroke z: 95 mm<br/>  4 x supports height 330 mm<br/>  control ief, pa control<br/>  alu-profilrahmen(4x4cm) with 4 doors with automatic locking system.<br/>  dimensions: l x d x h (ca. 1390 x 990 x 2000 mm)<br/>  aluminum table top cabinet CNC CONTROLLED 3 AXLE SYSTEM

A 3 AXIS SYSTEM FOR VARIOUS AUFGABEN(WIE FRAESEN, BOHREN, GRAVIEREN, HANDHABUNG, LASERN, LABORARBEITEN, ETC.)
X-Y AXES ARE CREATED BY IEF. TRAVERSE PATHS X 200 MM, Y: 320 MM
Z AXIS (FESTO) OPERATED PNEUMATICALLY. STROKE Z: 95 MM
4 X SUPPORTS HEIGHT 330 MM
CONTROL IEF, PA CONTROL
ALU-PROFILRAHMEN(4X4CM) WITH 4 DOORS WITH AUTOMATIC LOCKING SYSTEM.
DIMENSIONS: L X D X H (CA. 1390 X 990 X 2000 MM)
ALUMINUM TABLE TOP CABINET
Vendedor: MATRACOM
Año de construcción: usado
Precio: 25 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 450 €
Ubicación: Land-valve islands<br/>  <br/>  manufacturer: festo<br/>  type: vifb-06-d-1, tn 18 810<br/>  1 x interbus-s modules indent.: 5<br/>  4 x lr cp a/b-d-1<br/>  11 x j-5/2-d-1 c.<br/>  22 x mndh-3-1.4<br/>  external dimensions: width x length x height (approx. 73 x 23 x 8,5 cm)<br/>  all information without guarantee VALVE ISLANDS

MANUFACTURER: FESTO
TYPE: VIFB-06-D-1, TN 18 810
1 X INTERBUS-S MODULES INDENT.: 5
4 X LR CP A/B-D-1
11 X J-5/2-D-1 C.
22 X MNDH-3-1.4
EXTERNAL DIMENSIONS: WIDTH X LENGTH X HEIGHT (APPROX. 73 X 23 X 8,5 CM)
ALL INFORMATION WITHOUT GUARANTEE
Vendedor: MATRACOM
Año de construcción: usado
Precio: 45 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 260 €
Ubicación: Land-chain mortiser; 12-17 rail with 14 chain CHAIN MORTISER; 12-17 RAIL WITH 14 CHAIN
Vendedor: MSH-Maschinenhandel & Service GmbH
Año de construcción: usado
Precio: 30 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)