1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: 2008
Precio: 48.000 €
Ubicación: Land-de DE Obermaßfeld b. Würzburg
Vendedor: LM Dairy Consulting

A 1 111 1 sterile tank with 30.000 l Manufacturer year 2008 working pressure: 3,2 bar to -1,0 bar working temp. 30° to 145° is standing on 4 feet, withan automatic working sterile valve knot The bottom of the tank has 30% slint to the middle of the tank with electronic cabinet and with Display to attent to the automatic system with Siemens S 7 control system with CIP back flow centrifugal pump Price up standing point: 48.000,00 Euro more

Año de construcción: usado
Ubicación: Land-DE Germany, 47652 Weeze
Vendedor: Thünnesen GmbH

long input table, width of input approx. 90 mm\r\n more

Año de construcción: usado
Ubicación: Land-de DE 25462 Rellingen, Tangstedter Chaussee 70
Vendedor: Cortelia Systems GmbH

Currently, we have 2 complete mixing units in stock in stock. The machines are offered refurbished! MTI mixer M850 S 250 kW Material 1.4541 All contents 930 dm ³ Freezer 790 dm ³ MTI mixer - for every free-flowing mix with a bulk density of 0.01-4.0 kg / dm3 MTI mixer - no matter whether Nano particulate or granular struc - ture: we have the solution MTI mixer - adjustable friction introduction, somitauch for highly sensitive products kon gurable MTI mixer - with high performance cooling mixers type K or trough mixers type T for heating / cooling combinations can be extended "Greatest variety of process: heat, temper, react, melt, coating, agglomeration, di ... more

Año de construcción: 1995
Precio: used machinery auction RESALE 350 €
Ubicación: Land-de DE Germany, 21465 Reinbek
Vendedor: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 1400 x 500 x 500 mm Description: OPCO 30-50 Spraying Technology and Apparatus material volume flow: 4,5 l/min material overpressure: 240 bar transmission ratio: 30:1 air inlet pressure: 8 bar material temperatur max: 90°C Lot.Nr.208 - 219 at same location - save transport costs! more

Año de construcción: 1994
Precio: 3.200 €
Ubicación: Land-de DE Obermaßfeld b. Würzbg
Vendedor: LM Dairy Consulting

A 1 109 1 raw milk plate cooler manufacturer is GEA No. 1774, only one plate section System VT 40 Capacity: 30.000 l/h Manufacturer year is 1194 with a amount proportional sample device system with a small electronic wall cabinet with IDM flow meter near of the raw milk inlet into the plate cooler with a multiple pipe plate for several tank connections Price up standing place: 3.200,00 Euro more

Año de construcción: 2001
Precio: used machinery auction RESALE 100 €
Ubicación: Land-it IT Spain
Vendedor: Surplex GmbH

Weight approx.: 80 kg Dimensions (l x w x h) approx.: 650 x 600 x 1600 mm Description: Serial number A0110/6727, It works with all glue types of any viscosity using the corresponding pumps, Max Air pressure 7 bar, Power 0,2 kW, With 2 application guns, Air powered pump max flow rate 4,7 l/min, Ratio 15:1, DIN EN 60204-1 Standards, For further information see photos. more

Año de construcción: usado
Precio: 260 €
Ubicación: Land-ch CH Eriswil
Vendedor: MATEC system+technik GmbH

Flower pot press for alumina production with breakf. Forms Built in 1936 Weight 600 kg L x W x H: 150 x 70 x 190 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

Año de construcción: 1992
Precio: used machinery auction RESALE 6.000 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 5000 kg Dimensions (l x w x h) approx.: 6000 x 10000 x 3000 mm Description: Serial number 092/185. Flow rate 150 l. Filter size 5000 x 4500 x 2500 mm. Silos included, already dismanled and loaded on semi-trailer 7000 x 2500 mm. Trailer excluded <,/ b>, See foto more

Año de construcción: 2008
Precio: 134.000 €
Ubicación: Land-de DE Obermaßfeld bei Würzburg
Vendedor: LM Dairy Consulting

A1 103 Raw milk „cold standardisation for UHT processing ESL milk production without pasteurizing processing with the Alfa Laval OSA-cold processing Out of a closed dairy we could offer an ESL milk production from cold raw milk without pasteurizing before UHT heating is following. Alfa Laval OSA-cold milk standardisation existing about: 1 automatic control system with Siemens S 7 300 Type: Alfa Laval Alfast B&R PC manufacturer way is 2008 1 raw milk balance tanks station with 2 balance tanks with IDM flow measurements with 2 centrifugal pumps manufacturer year is 2008 1 Alfa Laval cold milk separator Type Tetra Centri 614 Capacity: 15.000 l/h (it  ... more

Año de construcción: 2012
Precio: used machinery auction RESALE 800 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 400 kg Dimensions (l x w x h) approx.: 2700 x 2600 x 2700 mm Description: Flow rate 2m². Serial number 126, Ø 1270 mm. Material S23JR. 1 bar connection. With protective roof. See photo more

Año de construcción: 2011
Ubicación: Land-de DE Baden Württemberg
Vendedor: METEC GmbH

CNC universal machining center Manufacturer: Coarse Type: G-350 Year of construction: 2011 CNC control: Siemens 840 d SL Traverse paths: X/Y/Z = 600 x 770 x 675 mm Pallet changer: 400 x 400 mm Tool changers: 99-fach + 10 separate courses Tool holder: HSK A63 Probe Hexagon Chip conveyor Weight: 12,000 kg Reference No.: WEI1300 Machine suitable for: 5-sided machining Space holes and angles Forms and flow profiles Precision parts more

Año de construcción: 2008
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 1900 x 1200 x 1650 mm Description: Operating pressure 10 bar. Power 75 HP, 55 kW. Power supply 400 V - 50 Hz. Flow rate 8500 l/h. Serial number BTS0937/08. With LOGIK6-S electronic control unit. See photo more

Año de construcción: 2018
Precio: 60.000 €
Ubicación: Land-ro RO Media?
Vendedor: Kuhn & Partner Romania SRL

Description Brand Altaqua Model AC-L850Y / AHU-2500 ID 7254 Status Active Price 60.000 € + VAT Year of manufacture 2018 Location Media? (RO) Chiller / air handling unit / air distribution box Altaqua manufactured in 2018. Tehnical description: Chiller Altaqua AC-L850Y: cooling capcity: 250 kW, refrigerant: R410a (6500 g x 4), compressor type: Panasonic / Danfoss, no. of compressors: 4. Air handling unit Altaqua AHU-2500: capacity: 250 kW, supply air flow: 40000 m3/h, motor power: 25 kW. Air distribution box: mounted type: floor standing, no. of holes: 6 (3 x 315 mm, 3 x 400 mm), manual valve control. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.57 ... more

Año de construcción: 1995
Precio: used machinery auction RESALE 600 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 355 kg Dimensions (l x w x h) approx.: 650 x 900 x 1600 mm Description: Serial number 33264. Pressure 8 bar. Flow rate 1,75 m³/min. Power 11 kW. Power supply 380 V - 50 Hz. Operating hours 20643. See photo more

Año de construcción: usado
Ubicación: Land-de DE 14641 Nauen/Berlin, Am Dorfanger 29
Vendedor: Kopack GmbH

Flow rack Jungheinrich type E very good condition, directly from the production! 7 segments available 3 layers per segment 5 pallets per location A total of 105 pallets Dimensions per segment: Total height 4007 mm Clear channel width 1400 mm Height 1300 mm per layer Pallet weight of 750 kg more

Año de construcción: 2006
Precio: used machinery auction RESALE 700 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 550 x 630 x 1200 mm Description: Flow rate 5000 l/min. Power 1,43 kW. Pressure 12 bar. Power supply 230 V/50 Hz, with R134A coolant quantity 0,8 kg. See photo more

Año de construcción: 2007
Ubicación: Land-cz CZ 60200 Brno, Janska 12
Vendedor: AMARON s.r.o.

Power on: 33258 h Cutting time: 15826 h Laser power: 3200 W Laser Type: CO2 TruFlow 3200 Control system: Siemens Sinumerik 840 D Table dimensions: 3000 x 1500 mm Max. Workpiece weight: 710 kg Max. Sheet thickness: Steel: 20 mm Stainless steel: 12 mm Aluminum: 8 mm Machine dimensions: 9300 x 4600 x 2000 mm Machine weight: 11500 kg Accessories: 3 laser head ( 3.75 / 5 / 7.5 inches ) Automatic pallet changer Chip conveyor Availability: 30.03.2019 more

Año de construcción: usado
Precio: used machinery auction RESALE 1.300 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 3000 kg Dimensions (l x w x h) approx.: 2100 x 1750 x 3530 mm Description: Serial number 1611450. Fan engine 9193 W. Power supply 220 V - 50 hz or 380 V - 50 Hz. Air flow 31650 m³/hour. 8712 m³/s. Hearth power 601 kW, 51700 kcal/hour. Standard unit 523 kW, 450000 kcal/hour. Methane powered. See photo more

Año de construcción: usado
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Chamber dimensions: 650x700x210mm, welding length: 4x640mm, volume flow: 100m³/h, connected load: 2.2kW. more

Año de construcción: 2005
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-it IT Italy, 37136 Verona (VR)
Vendedor: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 1900 x 1170 x 1650 mm Description: Serial number BTS0455/05. Flow rate 8000l/h. Power supply 400 V/50 Hz. Power 75 HP, 55 kW. Operating pressure 10 bar. With electronic controller LOGIKA CONTROL. See photo more

Año de construcción: 2002
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502659 manufacturer: KRAUSS MAFFEI Typ: KM 420-1900 C2 Controller Unit: MC 4 year of construction: 2002 technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 4200 kN distance between tie bars h: 800 mm distance between tie bars v: 800 mm size of mould plates h: 1270 mm size of mould plates v: 1200 mm min. mould height: 580 mm max. open daylight: 1600 mm opening stroke: 1020 mm ejector stroke: 250 mm ejector force: 95 kN centring device diameter of moving platen: 200 mm centring device diameter of fixed platen: 200 mm mould weight: 6700 kg technical data:i ... more

Año de construcción: 2018
Ubicación: Werk
Vendedor: Sperling Werkzeugmaschinen

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm total power requirement: 4 kW weight of the machine ca.: 0,650 t diameter of piston: 180 mm working feed: 2 mm/sec return speed: 20 mm/sec pressure capacity max.: 200 bar toolpiece height min.: 200 mm dimensions of the machine ca.: 1150 x 750 x 1103 mm This horizontal straightening press is designed for a wide variety of bending, profiling and straightening operations. ? ?The application of this Profi Press horizontal bending / straightening press varies depending on the accessories that can be installed on the worktable, on the tool mount and in the punch- and pin holes. This Profi Press model, the HB-28, is equipped with an angular gra ... more

Año de construcción: 1999
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

warehouse no.: 502310 manufacturer: KRAUSS MAFFEI Typ: KM 30-220 C Controller Unit: MC 4 year of construction: 1999 technical data: Clamping unit clamping force: 300 kN distance between tie bars h: 320 mm distance between tie bars v: 320 mm size of mould plates h: 540 mm size of mould plates v: 540 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm technical data:injection unit screw diameter: 25 mm swept volume: 52 ccm injection pressure: 2500 bar equipment included ? CEE-socket 16A ? core pulling hydraulically 1x ? air valve 1x ? machine without material hopper ? Anti vibration mounts ? Schuko-socket 10A ? machine incl. wate ... more

Año de construcción: 2007
Ubicación: Land-it IT Italy, 10098 Rivoli
Vendedor: Surplex GmbH

Weight approx.: 5500 kg Dimensions (l x w x h) approx.: 3700 x 1300 x 3100 mm Description: Serial number FN365031 Nominal flow rate 2400 kg Maximum lifting height 7000 mm Load center at 500 mm Fork length 1150 mm Weight of the vehicle without batteries 3920 kg. Battery weight from 1480 to 1683 kg Rated power 11 kW  ,With Battery Charger See photos more

Año de construcción: 2000
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

injection moulding machine DEMAG Ergotech 200 - 840 compact warehouse no.: 502664 manufacturer: DEMAG Typ: Ergotech 200 - 840 compact Controller Unit: NC4 year of construction: 2000 technical data: Clamping unit type of drive: fully hydraulically clamping type: toggle method of construction: four tie bars clamping force: 2000 kN distance between tie bars h: 560 mm distance between tie bars v: 560 mm size of mould plates h: 830 mm size of mould plates v: 830 mm min. mould height: 310 mm max. mould height: 660 mm max. open daylight: 1235 mm opening stroke: 575 mm ejector stroke: 180 mm ejector force: 69 kN centring device diameter of moving platen: 160 mm centring dev ... more

Año de construcción: 2000
Ubicación: Land-it IT Italy, 10098 Rivoli
Vendedor: Surplex GmbH

Weight approx.: 6380 kg Dimensions (l x w x h) approx.: 3850 x 1500 x 2700 mm Description: Matricola 5010A00164X Nominal flow 4000 kg Maximum lifting height 3600 mm Fork length 1200 mm Weight of the vehicle without batteries 4140 kg.  ,With Battery Charger See photos more

Año de construcción: 2003
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

DEMAG Ergotech 80-420-200 system for sale warehouse no.: 502629 manufacturer: DEMAG Typ: ERGOtech 80-420-200 System Controller Unit: NC4 year of construction: 2003 operating hours: 34000 h Do you need one used DEMAG ERGOtech 80 / 420-200 system with only approx. 34,000 operating hours? On request, we can make you our non-binding offer. In order to ensure the functionality of the used injection molding machine, we will check the operation of the machine with the Sumitomo-Demag service. Afterwards, this machine will be repaired and can be inspect by you during dry-cycle test run. technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic me ... more

Año de construcción: 2007
Ubicación: Land-it IT Italy, 10098 Rivoli
Vendedor: Surplex GmbH

Weight approx.: 3700 kg Dimensions (l x w x h) approx.: 3250 x 1200 x 2400 mm Description: Serial number FN366368 Nominal flow rate 1750 kg Max lifting height 5550 mm Load center at 500 mm Fork length 1150 mm Weight of the vehicle without batteries 2500 kg. Battery weight from 962 to 1097 kg Nominal power 8 kW  ,With Battery Charger See photos more

Año de construcción: usado
Ubicación: Land-at AT
Vendedor: WPS Molkereimaschinen

used equipment and machinery for cutting of cheese pieces from EURO block with horizontal packing machine FUJI FW710 / BS / B. -Cutting of pieces in bread format from EURO Block -Cutting of pieces in various weights from the bread formats -Packaging in plastic foil (Flow wrapper)Machines are used and ready for use. more

Año de construcción: 1992
Precio: used machinery auction RESALE 9.800 €
Ubicación: Land-nl NL Netherlands, 5384TB Heesch
Vendedor: Surplex GmbH

Weight approx.: 15000 kg Dimensions (l x w x h) approx.: 7400 x 1900 x 2400 mm Description: Serial number 23508, spraying unit: screw diameter 60 mm, dosing path 260 mm, screw speed 5 to 210 rpm, flow rate 51 g/s, injection flow 280 g/s, injection flow with increased injection pressure 240 g/s, max. swept volume 735 cm³, max. injection weight 661 g, specific injection pressure 1500 bar, specific injection pressure increased 1700 bar, nozzle path 350 mm, nozzle press force 96 kN, heat output 21,3 kW, 5 heating zones, closing unit: closing force 2750 kN, locking force 3025 kN, opening path 600 mm, ejector force 70 kN, tool installation height max. 560 mm, min. 200 mm, clamping plates total si ... more

Año de construcción: 2006
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

used injection moulding machine ENGEL VICTORY 1800-260 Power warehouse no.: 502528 manufacturer: ENGEL Typ: VICTORY 1800-260 Power Controller Unit: EC100 A03 year of construction: 2006 operating hours: 42266 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 2600 kN size of mould plates h: 1100 mm size of mould plates v: 1000 mm min. mould height: 400 mm max. open daylight: 1300 mm opening stroke: 900 mm ejector stroke: 200 mm ejector force: 90 kN mould weight: 3300 kg technical data:injection unit screw diameter: 70 mm swept volume: 1039 ccm injection pressure:  ... more

Año de construcción: 2000
Precio: 22.500 €
Ubicación: Land-de DE Barntrup
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: IMA\r\nType: COMPACT PC-6220 F\r\nYear: 2000\r\n\r\nLeft hand machine\r\nWorkpiece transport via a driven transport chain and adjustable top pressure\r\nBeckhoff control\r\n\r\nNeed of space LxWxH mm: 7400x1500x2000mm\r\nWeight: approx. 3600kg\r\n\r\nTechnical data:\r\n\r\nEdge material:\r\na) Veneer/coil and strip ware,\r\nb) PVC/coil and strip ware\r\nc) Solid wood strips\r\n\r\nmin. edge height = approx. 14 mm\r\nmax. edge height = approx. 55 mm\r\nmin. edge tickness = approx. 0,4 mm\r\nmax. edge thickness = approx. 20 mm\r\nmin. panel thickness = approx. 10 mm\r\nmin. panel thickness = approx. 16 mm at use of the multi function unit\r\nmax. pan ... more

Año de construcción: 2004
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

injection moulding machine ENGEL VICTORY 1050-200 Power warehouse no.: 502523 manufacturer: ENGEL Typ: VICTORY 1050-200 Power Controller Unit: EC100 A03 year of construction: 2004 operating hours: 42524 h description of VICTORY 1050-200 Power: Our range of machines includes the detailed examination of all functions as well as the repair or replacement of defective components.Buying this used ENGEL injection molding machine is not a big risk, because we place the highest value on a functional test and further revision. For repair, we use original ENGEL replacement parts that meet the highest standards. The machine specification includes the clamping force of 2000 kN (200 to). ... more

Año de construcción: 2002
Precio: 23.900 €
Ubicación: Land-de DE Barntrup
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided edge banding machine\r\nBrand: Homag\r\nType: Optimat KL 78/A20/S2/Z\r\nYear: 2002\r\nStop on the left hand side\r\n\r\nEquipment:\r\n- Motorical height adjustable top pressure with joined V-belt\r\n- HOMATIC-control with entering unit NC21\r\n- Pre-milling unit with 2 motors\r\n- Hot melt gluing unit A20 for coil ware up to 3 mm and strip ware up to 20 mm\r\n- End trimming unit chamfer/straight\r\n- Rough milling unit\r\n- Profile milling unit FK11\r\n- Universal milling unit\r\n- Multi re-cleaning unit MN21\r\n- Re-cleaning unit glued joint\r\n- Buffing unit\r\n- Workpiece support with roller rail, movable approx. 800 mm\r\n- Infeed fence adjustable\r\n\r\nWorkpiece transport: ... more

Año de construcción: 2000
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

ENGEL ES 650-150 HL warehouse no.: 502566 manufacturer: ENGEL Typ: ES 650-150 HL Controller Unit: EC 100 year of construction: 2000 operating hours: 61835 h We are selling a tie-bar-less injection molding machine of the manufacturer ENGEL type ES 650-150 HL from the year of construction 2000. After the exact technical examination in our technical center in Langenfeld and the subsequent revision, the machine can be seen during test-run (dry-cycle run). technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 1500 kN size of mould plates h: 820 mm size of mould plates v: 750 mm mi ... more

Año de construcción: 2003
Ubicación: Land-ro RO Romania, 807325 Galati Loc. Vanatori
Vendedor: Surplex GmbH

Weight approx.: 9999 kg Dimensions (l x w x h) approx.: 9999 x 9999 x 9999 mm Description: SIMA BDS 76 Machine Tool Cross Shear System - manufacturer: SIMA - type: BDS 76 - year of manufacture: 2003 - serial number: 03.52 - sheet widths: 1000 mm - 1250 mm - sheet thickness: 0,8 mm - 1.5 mm description: 1. uncoiler uncoiler - capacity: 7 m - hydraulic extension - frame 1250 mm - guide pressing device pneumatically driven 2. coil feeding equipment (coil slides) - capacity: 7 m - travel length: 2500 mm - electrohydraulic force 3. cutting machine - material width max.: 1250 mm - steel thickness: 0,8 - 1,5 mm - standard steel: OL 37 - 42 daN / mm² - steel types: standard steel, ... more

Año de construcción: 2003
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

ARBURG Allrounder 420 C 1300-250 warehouse no.: 502581 manufacturer: ARBURG Typ: Allrounder 420 C 1300-250 Controller Unit: SELOGICA year of construction: 2003 technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 1300 kN distance between tie bars h: 420 mm distance between tie bars v: 420 mm size of mould plates h: 600 mm size of mould plates v: 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm ejector stroke: 175 mm ejector force: 40 kN centring device diameter of moving platen: 125 mm centring device diameter of fixed platen: 125 mm tec ... more

Año de construcción: 2012
Ubicación: Land-it IT Italy, 10098 Rivoli
Vendedor: Surplex GmbH

Weight approx.: 4000 kg Dimensions (l x w x h) approx.: 3100 x 1100 x 2800 mm Description: Serial number FN433736 Nominal flow rate 1750 kg Load center at 500 mm Battery weight from 962 to 1094 kg. Weight of the vehicle without batteries 2833 kg  ,With Battery Charger See photos more

Año de construcción: 2006
Ubicación: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Vendedor: Maschinenhandel Borowski GmbH

ARBURG Allrounder 420C 1000-350-60 warehouse no.: 502623 manufacturer: ARBURG Typ: Allrounder 420C 1000-350-60 Controller Unit: SELOGICA year of construction: 2006 operating hours: 58000 h The vertical , second injection unit, of the type 60, has screw diameter 18 mm, swept volume 20 ccm, injection pressure 2500 bar. technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: four tie bars clamping force: 1000 kN distance between tie bars h: 420 mm distance between tie bars v: 420 mm size of mould plates h: 570 mm size of mould plates v: 570 mm min. mould height: 450 mm max. open daylight: 950 mm opening str ... more

Año de construcción: 1995
Precio: used machinery auction RESALE 500 €
Ubicación: Land-de DE Germany, 75397 Simmozheim
Vendedor: Surplex GmbH

Weight approx.: 400 kg volume rate of flow: 1,5 operating pressure: 10 Dimensions (l x w x h) approx.: 700 x 600 x 1400 mm Description: MAHLE MSK-G 15 Screw Compressor - machine no.: 912679 - dimensions of filter housing: 750 x 600 x 600 mm - weight of filter housing: ca. 50 kg more

Año de construcción: 2004
Ubicación: Land-de DE 76646 Bruchsal - Büchenau, Neutharder Str. 24a
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG

DRUCKFLIEÃ?Ã?PPMASCHINE EXTRUDE HONE V8 / 6 (2000) - 10-05-011 Shipping time: immediately Number: 10-05-011 Manufacturer: Extrude hone Type: V8 / 6 (2000) MACHINE DATA Year of construction: approx. 2004 L x W x h: approx. 2500 x 2000 x 2600 mm Weight: approx. 2500 kg Very good condition The AFM process provides high-quality results for serviced components, involving quality defects must be eliminated from mechanical processes. This makes it ideal for the following applications in the field of surface finishing the AFM process: Fillet: Achieving uniform radii. Critical points of fatigue surface tension reduction: Smoothing and removal of notch effect,  ... more

Año de construcción: usado
Ubicación: Oberkochen
Vendedor: Gebr. Engelfried oHG

Number of sanding units: 4 st. sanding width: 190 mm Sanding height max.: 180 mm Control: ja Double sided grinding machine Löwer DSM 2004 Double-sided four-band single-wood sanding machine for sanding Solid wood, e.g. Window wood etc. Highly stable top model with innovative details. Suitable for high Continuous load even at higher chip removal rates. - Successively arranged grinding units for rough grinding, fine grinding and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberised roller and shoe 3.Finish aggregate with fiber brush - Direct driven wheels for slip-free power transmission - Maintenance and wear-free CERMET-c ... more

Año de construcción: 2000
Ubicación: Land-de DE
Vendedor: Innovac GmbH

There are two machines available: (1) ESTA SRF P 10: volume flow: 570-890m³/h, filtration surface: 10m², working pressure: 24mbar, weight: 102kg, year of construction: 2000 (2) ESTA SRF P 13: max. volume flow: 1450m³/h, filtration surface: 15m², working pressure: 43mbar, weight: 220kg. more

Año de construcción: usado
Precio: used machinery auction RESALE 400 €
Ubicación: Land-es ES Spain, 12006 Castellon de la Plana
Vendedor: Surplex GmbH

Weight approx.: 70 kg Dimensions (l x w x h) approx.: 2100 x 1600 x 1810 mm Description: Composed of one armchair with pouf, one corner table, one vase, one Cattelan flowerpot and one folding screen, For further information see photos. more

Año de construcción: 1980
Ubicación: Land-de DE
Vendedor: Innovac GmbH

Volume flow: 1200l/min, operational overpressure: 13bar, rotational speed: 2895/min, connected load: 11kW. more

Año de construcción: 2000
Precio: used machinery auction RESALE 1.350 €
Ubicación: Land-es ES Spain, 46100 BURJASSOT-Valencia
Vendedor: Surplex GmbH

Weight approx.: 300 kg Dimensions (l x w x h) approx.: 70 x 1090 x 1780 mm Description: Air flow 8900 m³/min, Power 85 kW, Pressure 37 bar, For further information see photos. more

Año de construcción: usado
Ubicación: Land-dk DK 6280 Højer, Østermarksvej 16
Vendedor: Højer Pølser A/S

Fuji flowwrapper 3710, with fumigation, new transformer by Fuji Denmark servisiert, ehrzatstile for this machine, there are still 15 years. Bagsealer so foil from the bottom. 100% ok more

Año de construcción: usado
Ubicación: Goldenstedt
Vendedor: WeMa A. Pigge GmbH

current intensivity: 270 A performance DC max: 230 A performance AC max: 270 A weight of the machine ca.: 250 kg watercooled TIG hose package: 4000 mm Included: pressure regulator with flowmeter good condition, leakage at the cooling device! Has to be solded! more

Año de construcción: usado
Ubicación: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Vendedor: TOMESANI Srl

Code: 0440 Brand: ARDESIA Model: DUST-TABLE 2,5 E - CE Standard Sanding dust extraction table - Ce Standard - Year 2015 Lenght mm 2500 Width mm 1000 N° 2 aluminized polyester antistatic cartridges Exhaust fan power Kw 1,5 Nominal air flow m3/h 4300 Cleaning system with compressed air filters Drawers for dust recovery Folding walls Overall dimensions: mm 2600 x 1250 x 1200 h Weight kg 310 more

Año de construcción: usado
Ubicación: Goldenstedt
Vendedor: WeMa A. Pigge GmbH

connection: G 1/4 adjustable from - up to: 0,7 - 8 bar weight: 0,86 kg high flow pressure regulator body material: zinc alloy withour gauge manual included 10 pieces on stock! more

Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FLOW types: