49 ofertas

Año de construcción: usado
Ubicación: Land-there are two hydraulic aggregates available, capacity: 630l, rotational speed: 1450/min, connected load: 4kw, machine 2 is defective and can be used as a source of spare parts.  THERE ARE TWO HYDRAULIC AGGREGATES AVAILABLE, CAPACITY: 630L, ROTATIONAL SPEED: 1450/MIN, CONNECTED LOAD: 4KW, MACHINE 2 IS DEFECTIVE AND CAN BE USED AS A SOURCE OF SPARE PARTS.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 20 mm<br/>spindle passage: 24 mm<br/>turning length: 200 mm<br/>turning speeds: 20-10000 u/min<br/>c-axis: 0,001 0<br/>gripping station: 20 <br/>turning length: 80/600 mm<br/>turning speeds: 200-8000 u/min<br/>number of tools: 6+4+3+3 <br/>number of milling stations: 4 <br/>control: mitsubishi meldas <br/>positive location each: 15 grad<br/>number of axles: 5 st.<br/>total power requirement: 3,7 kw<br/>weight of the machine ca.: 1,8 t<br/>dimensions of the machine ca.: 2 x 1,1 x 1,6 plus fmb m<br/>bar loader: fmb 3-26 <br/>swiss type machine citizen l20-vii (serie 5) in good conditions.<br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 20 MM
SPINDLE PASSAGE: 24 MM
TURNING LENGTH: 200 MM
TURNING SPEEDS: 20-10000 U/MIN
C-AXIS: 0,001 0
GRIPPING STATION: 20
TURNING LENGTH: 80/600 MM
TURNING SPEEDS: 200-8000 U/MIN
NUMBER OF TOOLS: 6+4+3+3
NUMBER OF MILLING STATIONS: 4
CONTROL: MITSUBISHI MELDAS
POSITIVE LOCATION EACH: 15 GRAD
NUMBER OF AXLES: 5 ST.
TOTAL POWER REQUIREMENT: 3,7 KW
WEIGHT OF THE MACHINE CA.: 1,8 T
DIMENSIONS OF THE MACHINE CA.: 2 X 1,1 X 1,6 PLUS FMB M
BAR LOADER: FMB 3-26
SWISS TYPE MACHINE CITIZEN L20-VII (SERIE 5) IN GOOD CONDITIONS.





Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-takamaz xy 2000 year 2004 with feeder fmb turbo 10-72 xt

control, fabr. fanuc 18t, 8-axis (c1, c2, x 1, x 2, z1, z2, y1, a2), rotary diameter 250 mm, turning length of 500 mm max, speed maximum 4,000 u/min, main spindle, counter spindle 2 turret, jew. 12, driven tool stations, conveyors, fabr. bermec, part removal device m. sweep, cabin, bar feeder, fabr. fmb, type 10-72 turbo xt / 3200 a, 2004, l 3.200 mm, machine accessories driven tools, steel bracket for indoor / outdoor processing
 TAKAMAZ XY 2000 YEAR 2004 WITH FEEDER FMB TURBO 10-72 XT CONTROL, FABR. FANUC 18T, 8-AXIS (C1, C2, X 1, X 2, Z1, Z2, Y1, A2), ROTARY DIAMETER 250 MM, TURNING LENGTH OF 500 MM MAX, SPEED MAXIMUM 4,000 U/MIN, MAIN SPINDLE, COUNTER SPINDLE 2 TURRET, JEW. 12, DRIVEN TOOL STATIONS, CONVEYORS, FABR. BERMEC, PART REMOVAL DEVICE M. SWEEP, CABIN, BAR FEEDER, FABR. FMB, TYPE 10-72 TURBO XT / 3200 A, 2004, L 3.200 MM, MACHINE ACCESSORIES DRIVEN TOOLS, STEEL BRACKET FOR INDOOR / OUTDOOR PROCESSING
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Precio: used machinery auction RESALE 850 €
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1300 x 1600 x 1600 mm<br/>description: belt length 3180 mm, cutting capacity 240 x 240 mm, max opening 300 x 220 mm. see photo WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1600 X 1600 MM
DESCRIPTION: BELT LENGTH 3180 MM, CUTTING CAPACITY 240 X 240 MM, MAX OPENING 300 X 220 MM. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-main and sub spindle

workpiece conveyor belt

feeder fmb MAIN AND SUB SPINDLE WORKPIECE CONVEYOR BELT FEEDER FMB
Vendedor: MBM-Handel
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 5700 kg<br/>dimensions (l x w x h) approx.: 4000 x 3000 x 2200 mm<br/>description: serial number 05.650, spindle bore 65 mm, turning diameter 185 mm, turning length 450 mm, 2 turret slide, spindle speeds 25 to 4000 rpm, feeds up to 5000 mm/min, rapid traverse 15 m/min, spindle motor 22/29 kw, accessories: loading magazine fmb 300, pick-up spindle, chip conveyor, 1 set tool holders WEIGHT APPROX.: 5700 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 3000 X 2200 MM
DESCRIPTION: SERIAL NUMBER 05.650, SPINDLE BORE 65 MM, TURNING DIAMETER 185 MM, TURNING LENGTH 450 MM, 2 TURRET SLIDE, SPINDLE SPEEDS 25 TO 4000 RPM, FEEDS UP TO 5000 MM/MIN, RAPID TRAVERSE 15 M/MIN, SPINDLE MOTOR 22/29 KW, ACCESSORIES: LOADING MAGAZINE FMB 300, PICK-UP SPINDLE, CHIP CONVEYOR, 1 SET TOOL HOLDERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-main and sub spindle

workpiece conveyor belt

feeder fmb MAIN AND SUB SPINDLE WORKPIECE CONVEYOR BELT FEEDER FMB
Vendedor: MBM-Handel
Año de construcción: usado
Ubicación: Land-bar material dia.: 8-80 mm<br/>bar length: 800-3200 mm<br/>weight: 2800 kg<br/>heat output capacity:  kw<br/>air volumen:  m³/h<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> BAR MATERIAL DIA.: 8-80 MM
BAR LENGTH: 800-3200 MM
WEIGHT: 2800 KG
HEAT OUTPUT CAPACITY: KW
AIR VOLUMEN: M³/H
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Gustav Schönberger GmbH
Año de construcción: usado
Precio: 3.900 €
Ubicación: Land-used cycle bar feeder fmb 3000/1700 lms turbo

max. bar diameter mm 65
max. bar length mm 3,000

usable for mazak - emco - spinner - machine
    USED CYCLE BAR FEEDER FMB 3000/1700 LMS TURBO MAX. BAR DIAMETER MM 65 MAX. BAR LENGTH MM 3,000 USABLE FOR MAZAK - EMCO - SPINNER - MACHINE
Vendedor: GEMATEC GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 600 €
Ubicación: Land-weight approx.: 1400 kg<br/>dimensions (l x w x h) approx.: 6000 x 1000 x 1700 mm<br/>description: for bars with approx. 3000 mm length, machine number 32-201569 WEIGHT APPROX.: 1400 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 1000 X 1700 MM
DESCRIPTION: FOR BARS WITH APPROX. 3000 MM LENGTH, MACHINE NUMBER 32-201569
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year: 2007
axis c: direct 0.001 °,
rapid positioning 80rpm °
x-axis: 150 mm
rapid traverse (x / y / z): 12/06/24 m / min
max. diam. processable by bar: 80 mm
max. diam. machinable chuck: 300 mm
number of turrets: 2
machine weight: 6900 kg
lower tower: 12 motorizable stations, bidirectional servo, positioning 0.2 sec, driven tools 100-3000rpm, 3.7kw
upper tower: 12 motorizable stations, bidirectional servo, positioning 0.2 sec, driven tools 100-3000rpm, 3.7kw
axis z: 420 mm
y-axis: 100 (+ 60 / -40) mm
main spindle: 100-4000rpm, asa6 YEAR: 2007 AXIS C: DIRECT 0.001 °, RAPID POSITIONING 80RPM ° X-AXIS: 150 MM RAPID TRAVERSE (X / Y / Z): 12/06/24 M / MIN MAX. DIAM. PROCESSABLE BY BAR: 80 MM MAX. DIAM. MACHINABLE CHUCK: 300 MM NUMBER OF TURRETS: 2 MACHINE WEIGHT: 6900 KG LOWER TOWER: 12 MOTORIZABLE STATIONS, BIDIRECTIONAL SERVO, POSITIONING 0.2 SEC, DRIVEN TOOLS 100-3000RPM, 3.7KW UPPER TOWER: 12 MOTORIZABLE STATIONS, BIDIRECTIONAL SERVO, POSITIONING 0.2 SEC, DRIVEN TOOLS 100-3000RPM, 3.7KW AXIS Z: 420 MM Y-AXIS: 100 (+ 60 / -40) MM MAIN SPINDLE: 100-4000RPM, ASA6 ", 22 / 26KW, SPINDLE HOLE 80, DIAM INNER BEARING 110, CHUCK 210 BAR CAPACITY: 70 MM COUNTERSPINDLE: 100-4000RPM, ASA5 ", 5.5 / 7.5KW, SPINDLE HOLE 56, DIAM INNER BEARING 90, CHUCK 165 TOOLS FOR MOTORIZED TURRET: 12 OPERATING RANGE: 70-300X690 MM CNC: FANUC 18I-T SIZE TOOLS ALLOWED: 20X20 MM DIAMETER 32 EXTRA: HIGH PRESSURE PUMPS 20 BAR SEPTEMBER 4 DRIVEN TOOLS, BAR LOADER FMB TURBO 10-65XT 2002 DIMENSIONS: 4107X2128X2204 MM
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-turning diameter: 42 mm<br/>spindle passage: max. 42 mm<br/>control:  fanuc <br/>main spindle::  <br/>max. rpm: 5.000 min/-1<br/>power capacity: 7,5 / 5,5 kw<br/>subspindel::  <br/>max. rpm: 5.000 min/-1<br/>power capacity: 3,7 / 2,2 kw<br/>axis stroke::  <br/>x-axis: 1,2,3: 60 mm<br/>x-axis: 4: 130 mm<br/>z-axis: 2,3: 80 mm<br/>z-axis: 4: 340 mm<br/>number of axis: 7 <br/>accelaration: max. 5 m/sec²<br/>rapid traverse: 15 m/min<br/>tool holder positions::  <br/>fixed tool: s1/s2/s3 : 1/1/4 pos.<br/>fixed tool: s4 : 4 pos.<br/>driven statition: s2/s4 : -/1 pos.<br/>backside processing::  <br/>fixed tool: 3 pos.<br/>driven statition: - pos.<br/>total power requirement: - kw<br/>weight of the machine ca.: 3,5 t<br/>dimensions of the machine ca.: 8,0 x 2,5 x  2,0 m<br/>documents:  <br/>chip conveyor:  <br/>subspindle:  <br/>bar feeder interface:  <br/>bar feeder: fmb turbo 5-55 <br/>parts removal:  <br/>cnc - bar automatic lathe longitudinal<br/>gildemeister - msl 42-7<br/><br/>- 7 axis<br/>- barfeeder fmb turbo 5-55<br/><br/><br/><br/><br/> TURNING DIAMETER: 42 MM
SPINDLE PASSAGE: MAX. 42 MM
CONTROL: FANUC
MAIN SPINDLE::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY: 7,5 / 5,5 KW
SUBSPINDEL::
MAX. RPM: 5.000 MIN/-1
POWER CAPACITY: 3,7 / 2,2 KW
AXIS STROKE::
X-AXIS: 1,2,3: 60 MM
X-AXIS: 4: 130 MM
Z-AXIS: 2,3: 80 MM
Z-AXIS: 4: 340 MM
NUMBER OF AXIS: 7
ACCELARATION: MAX. 5 M/SEC²
RAPID TRAVERSE: 15 M/MIN
TOOL HOLDER POSITIONS::
FIXED TOOL: S1/S2/S3 : 1/1/4 POS.
FIXED TOOL: S4 : 4 POS.
DRIVEN STATITION: S2/S4 : -/1 POS.
BACKSIDE PROCESSING::
FIXED TOOL: 3 POS.
DRIVEN STATITION: - POS.
TOTAL POWER REQUIREMENT: - KW
WEIGHT OF THE MACHINE CA.: 3,5 T
DIMENSIONS OF THE MACHINE CA.: 8,0 X 2,5 X 2,0 M
DOCUMENTS:
CHIP CONVEYOR:
SUBSPINDLE:
BAR FEEDER INTERFACE:
BAR FEEDER: FMB TURBO 5-55
PARTS REMOVAL:
CNC - BAR AUTOMATIC LATHE LONGITUDINAL
GILDEMEISTER - MSL 42-7

- 7 AXIS
- BARFEEDER FMB TURBO 5-55




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-2003
max. diam. processable by bar: 70 mm
max. diam. machinable chuck: 300 mm
axis c: direct 0.001 °,
rapid positioning 80rpm °
x-axis: 150 mm
rapid traverse (x / y / z): 12/06/24 m / min
number of turrets: 2 
machine weight: 6900 kg
lower tower: 12 motorizable stations, bidirectional servo, positioning 0.2 sec, driven tools 100-3000rpm, 3.7kw
upper tower: 12 motorizable stations, bidirectional servo, positioning 0.2 sec, driven tools 100-3000rpm, 3.7kw
axis z: 420 mm
y-axis: 100 (+ 60 / -40) mm
main spindle: 100-4000rpm, asa6 2003 MAX. DIAM. PROCESSABLE BY BAR: 70 MM MAX. DIAM. MACHINABLE CHUCK: 300 MM AXIS C: DIRECT 0.001 °, RAPID POSITIONING 80RPM ° X-AXIS: 150 MM RAPID TRAVERSE (X / Y / Z): 12/06/24 M / MIN NUMBER OF TURRETS: 2 MACHINE WEIGHT: 6900 KG LOWER TOWER: 12 MOTORIZABLE STATIONS, BIDIRECTIONAL SERVO, POSITIONING 0.2 SEC, DRIVEN TOOLS 100-3000RPM, 3.7KW UPPER TOWER: 12 MOTORIZABLE STATIONS, BIDIRECTIONAL SERVO, POSITIONING 0.2 SEC, DRIVEN TOOLS 100-3000RPM, 3.7KW AXIS Z: 420 MM Y-AXIS: 100 (+ 60 / -40) MM MAIN SPINDLE: 100-4000RPM, ASA6 ", 22 / 26KW, SPINDLE HOLE 80, DIAM INNER BEARING 110, CHUCK 210 BAR CAPACITY: 70 MM COUNTERSPINDLE: 100-4000RPM, ASA5 ", 5.5 / 7.5KW, SPINDLE HOLE 56, DIAM INNER BEARING 90, CHUCK 165 TOOLS FOR MOTORIZED TURRET: 12 OPERATING RANGE: 70-300X690 MM CNC: FANUC 18I-T SIZE TOOLS ALLOWED: 20X20 MM DIAMETER 32 EXTRA: HIGH PRESSURE PUMPS 20 BAR SEPTEMBER 4 DRIVEN TOOLS BAR LOADER FMB TURBO 10-65XT 2002 DIMENSIONS: 4107X2128X2204 MM
Vendedor: Industrialbay
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 1150 kg<br/>dimensions (l x w x h) approx.: 2600 x 1700 x 1500 mm<br/>description: cutting capacity at 0º: 240 mm (rounded), 240 x 240 mm (squared), 300 x 220 mm (rectangle).<br> cutting capacity at 45º: 200 mm (rounded), 180 x 180 mm (squared), 200 x 100 mm (rectangle).<br> cutting capacity at 60º: 120 mm (rounded), 120 x 120 mm (squared), 110 x 160 mm (rectangle).<br> main motor power: 1,1kw WEIGHT APPROX.: 1150 KG
DIMENSIONS (L X W X H) APPROX.: 2600 X 1700 X 1500 MM
DESCRIPTION: CUTTING CAPACITY AT 0º: 240 MM (ROUNDED), 240 X 240 MM (SQUARED), 300 X 220 MM (RECTANGLE).
CUTTING CAPACITY AT 45º: 200 MM (ROUNDED), 180 X 180 MM (SQUARED), 200 X 100 MM (RECTANGLE).
CUTTING CAPACITY AT 60º: 120 MM (ROUNDED), 120 X 120 MM (SQUARED), 110 X 160 MM (RECTANGLE).
MAIN MOTOR POWER: 1,1KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-qt-primos 150 sg-smoothc	
operating hours: 4655 h	
control system:	
mazatrol smoothc	
bar passage: 5 - 65 mm	
diameter: 250 mm	
bar length: 500 - 3200 mm	
speed: 4000 rpm	
motor power: 2.5 kw	
feed rate: 1000 mm / s	
electrical voltage: 400 v / 24 v	
air pressure: 6 bar	
machine weight: 1800 kg	
accessories:	
tool holder	
pump (10 bar)	
feeder magazine: fmb turbo 5-65 / 3200a		    QT-PRIMOS 150 SG-SMOOTHC OPERATING HOURS: 4655 H CONTROL SYSTEM: MAZATROL SMOOTHC BAR PASSAGE: 5 - 65 MM DIAMETER: 250 MM BAR LENGTH: 500 - 3200 MM SPEED: 4000 RPM MOTOR POWER: 2.5 KW FEED RATE: 1000 MM / S ELECTRICAL VOLTAGE: 400 V / 24 V AIR PRESSURE: 6 BAR MACHINE WEIGHT: 1800 KG ACCESSORIES: TOOL HOLDER PUMP (10 BAR) FEEDER MAGAZINE: FMB TURBO 5-65 / 3200A
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-pressure:36 t<br/>chamfer lenght:1300 mm<br/>distance between columns:960 mm<br/>stroke:150 mm<br/>throat:410 mm<br/>weight of the machine ca.:3,6 t<br/>dimensions of the machine ca.:2,8 x 2,2 x 2,3 m<br/><br/>- amada amncpc control - man. quick clamp - stamped set, 1670 mm - matrix v16 divided, 1665 mm - matrix v40 divided, 1665 mm - die v25 split, 1665 mm - controlled axes: y1, y2, x, r, z1, z2 - lasersafe photocell PRESSURE:36 T
CHAMFER LENGHT:1300 MM
DISTANCE BETWEEN COLUMNS:960 MM
STROKE:150 MM
THROAT:410 MM
WEIGHT OF THE MACHINE CA.:3,6 T
DIMENSIONS OF THE MACHINE CA.:2,8 X 2,2 X 2,3 M

- AMADA AMNCPC CONTROL - MAN. QUICK CLAMP - STAMPED SET, 1670 MM - MATRIX V16 DIVIDED, 1665 MM - MATRIX V40 DIVIDED, 1665 MM - DIE V25 SPLIT, 1665 MM - CONTROLLED AXES: Y1, Y2, X, R, Z1, Z2 - LASERSAFE PHOTOCELL
Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-secondhand automatic edgebander fmb mod. bme/2

gluing unit

end trimming unit

top and bottom trimming unit

min panel lenght mm. 120

min panel width mm. 60

panel thickness mm. 10-60

edge thickness mm. 0,4-10

year of production 2005

ce

secondhand woodworking machine



 SECONDHAND AUTOMATIC EDGEBANDER FMB MOD. BME/2 GLUING UNIT END TRIMMING UNIT TOP AND BOTTOM TRIMMING UNIT MIN PANEL LENGHT MM. 120 MIN PANEL WIDTH MM. 60 PANEL THICKNESS MM. 10-60 EDGE THICKNESS MM. 0,4-10 YEAR OF PRODUCTION 2005 CE SECONDHAND WOODWORKING MACHINE
Vendedor: VERGA ERCOLE di Roberto Verga & C. S.A.S
Año de construcción: usado
Ubicación: Land-turning diameter: 20 mm<br/>turning length: 85 mm<br/>control: fanuc 160 i <br/>turning speeds: 10.000 u/min<br/>c-axis: 0,1 °<br/>gripping station: 20 <br/>c-axis: 0,1 0<br/>turning length: 180 mm<br/>turning speeds: 10000 u/min<br/>number of working hours: 21905 h<br/>tool holder -shaft diameter: 12 x 12 mm<br/>dia. of quill: 20 mm<br/>total power requirement: 5,5 kw<br/>weight of the machine ca.: 2,6 t<br/>dimensions of the machine ca.: 2,3 x 1,3 x 1,8m+4,5 fmb m<br/>bar loader: fmb turbo 3-26 <br/>dmg sliding headstock machine sprint 20/8 linear, built 2008<br/>7-axis, backspindle, 2 off c-axis<br/>on / off 21.905h<br/>spindle hours 14.328h<br/><br/><br/><br/><br/> TURNING DIAMETER: 20 MM
TURNING LENGTH: 85 MM
CONTROL: FANUC 160 I
TURNING SPEEDS: 10.000 U/MIN
C-AXIS: 0,1 °
GRIPPING STATION: 20
C-AXIS: 0,1 0
TURNING LENGTH: 180 MM
TURNING SPEEDS: 10000 U/MIN
NUMBER OF WORKING HOURS: 21905 H
TOOL HOLDER -SHAFT DIAMETER: 12 X 12 MM
DIA. OF QUILL: 20 MM
TOTAL POWER REQUIREMENT: 5,5 KW
WEIGHT OF THE MACHINE CA.: 2,6 T
DIMENSIONS OF THE MACHINE CA.: 2,3 X 1,3 X 1,8M+4,5 FMB M
BAR LOADER: FMB TURBO 3-26
DMG SLIDING HEADSTOCK MACHINE SPRINT 20/8 LINEAR, BUILT 2008
7-AXIS, BACKSPINDLE, 2 OFF C-AXIS
ON / OFF 21.905H
SPINDLE HOURS 14.328H




Vendedor: Detlef Jahn e. K.
Año de construcción: usado
Ubicación: Land-code: 0541
brand: fmb - italy
model: b1/s - ce standard 

sanding machine for edges with 1 group for round, shaped and right raw and coated edges  - ce standard 

sanding group   with speed variator  , tilting from  + 45°  to  - 10°
brush unit rpm 950   motor kw 1,1 with variable speed 
max working height  mm 100
min working lenght  mm 120
variable feed speed of workpiece from  3 to  28 mt/min
operating pressure  6/7 atm
support for panels 
oversall dimensions: mm 2950 x 1300 x 1300 h
weight  kg 950



 CODE: 0541 BRAND: FMB - ITALY MODEL: B1/S - CE STANDARD SANDING MACHINE FOR EDGES WITH 1 GROUP FOR ROUND, SHAPED AND RIGHT RAW AND COATED EDGES - CE STANDARD SANDING GROUP WITH SPEED VARIATOR , TILTING FROM + 45° TO - 10° BRUSH UNIT RPM 950 MOTOR KW 1,1 WITH VARIABLE SPEED MAX WORKING HEIGHT MM 100 MIN WORKING LENGHT MM 120 VARIABLE FEED SPEED OF WORKPIECE FROM 3 TO 28 MT/MIN OPERATING PRESSURE 6/7 ATM SUPPORT FOR PANELS OVERSALL DIMENSIONS: MM 2950 X 1300 X 1300 H WEIGHT KG 950
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-greates pass round over bed:460 mm<br/>swing diameter over bed slide:290 mm<br/>spindle bore:65 mm<br/>y-axis:80 mm<br/>centre distance:580 mm<br/>control:fanuc  18t-itb <br/>spindle turning speed - stepless:4000 1/min<br/>turret head:2 x 12 vdi 30 pos.<br/>rotational speed range of tools:3000 1/min<br/>rapid power traverse in x-and z direction:24 / 30 m/min<br/>total connected load:60 kva<br/>weight of the machine ca.:5,5 t<br/>dimensions of the machine ca.:3,1 x 2,35 x 2,25 m<br/><br/>turning center with y-axis, 6 live tools per turret, subspindel, c-axis, y-axis, chipconveyor, barloader fmb turbo 10-72, no accessories,  approx. 62.800h \ GREATES PASS ROUND OVER BED:460 MM
SWING DIAMETER OVER BED SLIDE:290 MM
SPINDLE BORE:65 MM
Y-AXIS:80 MM
CENTRE DISTANCE:580 MM
CONTROL:FANUC 18T-ITB
SPINDLE TURNING SPEED - STEPLESS:4000 1/MIN
TURRET HEAD:2 X 12 VDI 30 POS.
ROTATIONAL SPEED RANGE OF TOOLS:3000 1/MIN
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:24 / 30 M/MIN
TOTAL CONNECTED LOAD:60 KVA
WEIGHT OF THE MACHINE CA.:5,5 T
DIMENSIONS OF THE MACHINE CA.:3,1 X 2,35 X 2,25 M

TURNING CENTER WITH Y-AXIS, 6 LIVE TOOLS PER TURRET, SUBSPINDEL, C-AXIS, Y-AXIS, CHIPCONVEYOR, BARLOADER FMB TURBO 10-72, NO ACCESSORIES, APPROX. 62.800H \"MACHINE ON\", APPROX 29.500H \"SPINDLE ON\"
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-doosan s 310 sml 5-axis slant bed cnc lathes with driven tools

control: fanuc 18 ttc

with counter spindle, 2 c-axes, sauter vdi 30 turret

initial start up 2007

ran in single-shift operation

flat guides on all axes

technical data:

diameter over bed: 500mm
ogjyzfu
maximum turning diameter: 310 mm
maximum turning length: 530 mm
slant bed 30â°
bar passage: 66 mm spindle, 24 mm sub spindle
2 c-axis

main spindle:
spindle bore 77 mm
speed range 40-4500u/min stepless
max torque 186nm
c1 axis 0-360 â° / 0.001 â°

sub spindle:
spindle bore 37 mm
speed range 40-4500u/min stepless
max torque 74nm
c2 axis 0-360 â° / 0.001 â°
fully synchronous
location-friendly takeover

axis travel:

x 200mm
z 560mm
b 470mm

rapid traverse:
x 24m / min
z 30m / min
b-24 m/min
c1/2 30m / min

turret:

vdi 30 sauter
12 stations up to 3000 rpm
switching time 0.2 sec

main spindle 15kw
sub spindle 5, 5kw

power 35kva/63a/t

footprint 3400x1900mm
weight 3500kg

accessories:

advanced coolant unit with high pressure pump
clamping stroke control on both spindles
2 x collet chuck marquart
1 x three-jaw chuck kitagawa b-210
1 x three-jaw chuck kitagawa b-206
signal lamp
part conveyor
b-axis drive (new)
numerous recordings (see pictures)
documentation
work light
central lubrication system
double foot switch
chip conveyor

fmb bar loader 3000 mm diameter 65 mm with various clamping sleeve (see picture)

loading and application including DOOSAN S 310 SML 5-AXIS SLANT BED CNC LATHES WITH DRIVEN TOOLS CONTROL: FANUC 18 TTC WITH COUNTER SPINDLE, 2 C-AXES, SAUTER VDI 30 TURRET INITIAL START UP 2007 RAN IN SINGLE-SHIFT OPERATION FLAT GUIDES ON ALL AXES TECHNICAL DATA: DIAMETER OVER BED: 500MM OGJYZFU MAXIMUM TURNING DIAMETER: 310 MM MAXIMUM TURNING LENGTH: 530 MM SLANT BED 30&ACIRC;&DEG; BAR PASSAGE: 66 MM SPINDLE, 24 MM SUB SPINDLE 2 C-AXIS MAIN SPINDLE: SPINDLE BORE 77 MM SPEED RANGE 40-4500U/MIN STEPLESS MAX TORQUE 186NM C1 AXIS 0-360 &ACIRC;&DEG; / 0.001 &ACIRC;&DEG; SUB SPINDLE: SPINDLE BORE 37 MM SPEED RANGE 40-4500U/MIN STEPLESS MAX TORQUE 74NM C2 AXIS 0-360 &ACIRC;&DEG; / 0.001 &ACIRC;&DEG; FULLY SYNCHRONOUS LOCATION-FRIENDLY TAKEOVER AXIS TRAVEL: X 200MM Z 560MM B 470MM RAPID TRAVERSE: X 24M / MIN Z 30M / MIN B-24 M/MIN C1/2 30M / MIN TURRET: VDI 30 SAUTER 12 STATIONS UP TO 3000 RPM SWITCHING TIME 0.2 SEC MAIN SPINDLE 15KW SUB SPINDLE 5, 5KW POWER 35KVA/63A/T FOOTPRINT 3400X1900MM WEIGHT 3500KG ACCESSORIES: ADVANCED COOLANT UNIT WITH HIGH PRESSURE PUMP CLAMPING STROKE CONTROL ON BOTH SPINDLES 2 X COLLET CHUCK MARQUART 1 X THREE-JAW CHUCK KITAGAWA B-210 1 X THREE-JAW CHUCK KITAGAWA B-206 SIGNAL LAMP PART CONVEYOR B-AXIS DRIVE (NEW) NUMEROUS RECORDINGS (SEE PICTURES) DOCUMENTATION WORK LIGHT CENTRAL LUBRICATION SYSTEM DOUBLE FOOT SWITCH CHIP CONVEYOR FMB BAR LOADER 3000 MM DIAMETER 65 MM WITH VARIOUS CLAMPING SLEEVE (SEE PICTURE) LOADING AND APPLICATION INCLUDING
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-max. machining diameter: 12,7 mm<br/>max. machining length: 130 mm<br/>control: tx 8i <br/>main spindle::  <br/>turning speed range - main spindle: 0 - 12.000 min/-1<br/>power capacity - main spindel: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>spindle bearing diameter: 35 mm<br/>max. bar capacity: 12,7 mm<br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 0 - 12.000 min/-1<br/>power capacity - sub spindle: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>c-axis: 0,001 °<br/>turret::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>turret 2::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>backside processing::  <br/>number of fixed tools: 3 pos<br/>shank diameter: 20 mm<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: 28 mm<br/>axis stroke::  <br/>x-axis: 1/2: 35 / 4: 39 mm<br/>y-axis: 37,5 (-9,5/+28) mm<br/>z-axis: 2: 50 / 3: 80 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 / 15 / 30 m/min<br/>rapid traverse: c: 0 - 100 1/min<br/>feed speeds: x: max. 7.500 mm/min<br/>feed speeds: y: max. 7.500 mm/min<br/>feed speeds: z: max. 10.000 mm/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 2,0 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>bar feeder: fmb minimag <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>cnc - bar automatic lathe<br/>traub - tnl 12/7<br/><br/>- incl. barfeeder fmb minimag<br/><br/><br/><br/><br/> MAX. MACHINING DIAMETER: 12,7 MM
MAX. MACHINING LENGTH: 130 MM
CONTROL: TX 8I
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
SPINDLE BEARING DIAMETER: 35 MM
MAX. BAR CAPACITY: 12,7 MM
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
C-AXIS: 0,001 °
TURRET::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
TURRET 2::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
BACKSIDE PROCESSING::
NUMBER OF FIXED TOOLS: 3 POS
SHANK DIAMETER: 20 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: 28 MM
AXIS STROKE::
X-AXIS: 1/2: 35 / 4: 39 MM
Y-AXIS: 37,5 (-9,5/+28) MM
Z-AXIS: 2: 50 / 3: 80 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 / 15 / 30 M/MIN
RAPID TRAVERSE: C: 0 - 100 1/MIN
FEED SPEEDS: X: MAX. 7.500 MM/MIN
FEED SPEEDS: Y: MAX. 7.500 MM/MIN
FEED SPEEDS: Z: MAX. 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
BAR FEEDER: FMB MINIMAG
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
CNC - BAR AUTOMATIC LATHE
TRAUB - TNL 12/7

- INCL. BARFEEDER FMB MINIMAG




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-used cnc swiss type lathe cincom b12
barfeeder fmb minimag 3200
maximum processing diameter: 12 mm
backspindle
very good condition
  USED CNC SWISS TYPE LATHE CINCOM B12 BARFEEDER FMB MINIMAG 3200 MAXIMUM PROCESSING DIAMETER: 12 MM BACKSPINDLE VERY GOOD CONDITION
Vendedor: Wietec Björn Wied
Año de construcción: usado
Ubicación: Land-max. machining diameter: 12,7 mm<br/>max. machining length: 130 mm<br/>control: tx 8i <br/>main spindle::  <br/>turning speed range - main spindle: 0 - 12.000 min/-1<br/>power capacity - main spindel: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>spindle bearing diameter: 35 mm<br/>max. bar capacity: 12,7 mm<br/>c-axis: 0,001 °<br/>subspindle::  <br/>spindle speed range subspindle: 0 - 12.000 min/-1<br/>power capacity - sub spindle: 4,0 / 2,5 kw<br/>max. torque: 7 nm<br/>c-axis: 0,001 °<br/>turret::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>turret 2::  <br/>number of toolpositions: 6 pos.<br/>shank diameter: 12 x 12 mm<br/>number of driven toolspositions: 6 pos.<br/>spindle speed - driven tool stations: 0 - 8.000 min -1<br/>power capacity driven tool-stations: 1,5 / 0,9 kw<br/>max. torque: 2,4 nm<br/>backside processing::  <br/>number of fixed tools: 3 pos<br/>shank diameter: 20 mm<br/>number of driven toolspositions: 4 pos.<br/>shank diameter: 28 mm<br/>axis stroke::  <br/>x-axis: 1/2: 35 / 4: 39 mm<br/>y-axis: 37,5 (-9,5/+28) mm<br/>z-axis: 2: 50 / 3: 80 mm<br/>feeds::  <br/>rapid traverse ( x / y / z ): 15 / 15 / 30 m/min<br/>rapid traverse: c: 0 - 100 1/min<br/>feed speeds: x: max. 7.500 mm/min<br/>feed speeds: y: max. 7.500 mm/min<br/>feed speeds: z: max. 10.000 mm/min<br/>total power requirement: 18 kw<br/>weight of the machine ca.: 2,0 t<br/>dimensions of the machine ca.: 7,0 x 2,5 x 2,3 m<br/>documents:  <br/>chip conveyor:  <br/>bar feeder: fmb minimag <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>cnc - bar automatic lathe<br/>traub - tnl 12/7<br/><br/>- incl. barfeeder fmb minimag<br/><br/><br/><br/><br/> MAX. MACHINING DIAMETER: 12,7 MM
MAX. MACHINING LENGTH: 130 MM
CONTROL: TX 8I
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
SPINDLE BEARING DIAMETER: 35 MM
MAX. BAR CAPACITY: 12,7 MM
C-AXIS: 0,001 °
SUBSPINDLE::
SPINDLE SPEED RANGE SUBSPINDLE: 0 - 12.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 4,0 / 2,5 KW
MAX. TORQUE: 7 NM
C-AXIS: 0,001 °
TURRET::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
TURRET 2::
NUMBER OF TOOLPOSITIONS: 6 POS.
SHANK DIAMETER: 12 X 12 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
SPINDLE SPEED - DRIVEN TOOL STATIONS: 0 - 8.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 1,5 / 0,9 KW
MAX. TORQUE: 2,4 NM
BACKSIDE PROCESSING::
NUMBER OF FIXED TOOLS: 3 POS
SHANK DIAMETER: 20 MM
NUMBER OF DRIVEN TOOLSPOSITIONS: 4 POS.
SHANK DIAMETER: 28 MM
AXIS STROKE::
X-AXIS: 1/2: 35 / 4: 39 MM
Y-AXIS: 37,5 (-9,5/+28) MM
Z-AXIS: 2: 50 / 3: 80 MM
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 15 / 15 / 30 M/MIN
RAPID TRAVERSE: C: 0 - 100 1/MIN
FEED SPEEDS: X: MAX. 7.500 MM/MIN
FEED SPEEDS: Y: MAX. 7.500 MM/MIN
FEED SPEEDS: Z: MAX. 10.000 MM/MIN
TOTAL POWER REQUIREMENT: 18 KW
WEIGHT OF THE MACHINE CA.: 2,0 T
DIMENSIONS OF THE MACHINE CA.: 7,0 X 2,5 X 2,3 M
DOCUMENTS:
CHIP CONVEYOR:
BAR FEEDER: FMB MINIMAG
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
CNC - BAR AUTOMATIC LATHE
TRAUB - TNL 12/7

- INCL. BARFEEDER FMB MINIMAG




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-manufacturer: traub
model: tnl 18-7
year of construction: 2011
control: mitsubishi tx8i-s
turning length [mm]: 200
spindle transmission rate [mm]: 18 / 21 main spindle:
technology: motor spindle
speed: 12.000 rpm
power: 5.5 kw
spindle passage: 18 mm
c-axis: 0.001 â°

counter spindle:
speed: 12.000 rpm
power: 3,4 kw
workpiece diameter (maximum): 21 mm
clamping depth workpiece (maximum): 180 mm
clamping pressure (max.): 30 bar

tool carrier i (x/y/z):
technology: turret with 8 stations
tool holder: traub ã¸45 mm
driven tools: 12.000 rpm, 3,4 kw
traverse path x/y/z axis: 120/65/250 mm
rapid traverse x/y/z axis: 20/20/40 m / min

tool carrier ii (x/y/z):
technology: revolvers with 7 stations + counter spindle
tool holder: traub ã¸45 mm
driven tools: 12.000 rpm, 3,4 kw
traverse path x/y/z axis: 120/60/250 mm
rapid traverse x/y/z axis: 20/20/40 m / min

equipment / accessories:
measuring system: engine measuring system
spã¤nemangement: chip conveyor
coolant supply: internal cooling system with paper band filter, 30 bar
raw material supply: rod loader, fmb minimag 20/1600
precast drainage: grab with conveyor belt
oil mist extraction: mechanical separator, fabr. bã¼chel
fire extinguisher: power + bauer
network connection: preparing
tool holder: div. holder MANUFACTURER: TRAUB MODEL: TNL 18-7 YEAR OF CONSTRUCTION: 2011 CONTROL: MITSUBISHI TX8I-S TURNING LENGTH [MM]: 200 SPINDLE TRANSMISSION RATE [MM]: 18 / 21 MAIN SPINDLE: TECHNOLOGY: MOTOR SPINDLE SPEED: 12.000 RPM POWER: 5.5 KW SPINDLE PASSAGE: 18 MM C-AXIS: 0.001 &ACIRC;&DEG; COUNTER SPINDLE: SPEED: 12.000 RPM POWER: 3,4 KW WORKPIECE DIAMETER (MAXIMUM): 21 MM CLAMPING DEPTH WORKPIECE (MAXIMUM): 180 MM CLAMPING PRESSURE (MAX.): 30 BAR TOOL CARRIER I (X/Y/Z): TECHNOLOGY: TURRET WITH 8 STATIONS TOOL HOLDER: TRAUB &ATILDE;&CEDIL;45 MM DRIVEN TOOLS: 12.000 RPM, 3,4 KW TRAVERSE PATH X/Y/Z AXIS: 120/65/250 MM RAPID TRAVERSE X/Y/Z AXIS: 20/20/40 M / MIN TOOL CARRIER II (X/Y/Z): TECHNOLOGY: REVOLVERS WITH 7 STATIONS + COUNTER SPINDLE TOOL HOLDER: TRAUB &ATILDE;&CEDIL;45 MM DRIVEN TOOLS: 12.000 RPM, 3,4 KW TRAVERSE PATH X/Y/Z AXIS: 120/60/250 MM RAPID TRAVERSE X/Y/Z AXIS: 20/20/40 M / MIN EQUIPMENT / ACCESSORIES: MEASURING SYSTEM: ENGINE MEASURING SYSTEM SP&ATILDE;&CURREN;NEMANGEMENT: CHIP CONVEYOR COOLANT SUPPLY: INTERNAL COOLING SYSTEM WITH PAPER BAND FILTER, 30 BAR RAW MATERIAL SUPPLY: ROD LOADER, FMB MINIMAG 20/1600 PRECAST DRAINAGE: GRAB WITH CONVEYOR BELT OIL MIST EXTRACTION: MECHANICAL SEPARATOR, FABR. B&ATILDE;&FRAC14;CHEL FIRE EXTINGUISHER: POWER + BAUER NETWORK CONNECTION: PREPARING TOOL HOLDER: DIV. HOLDER
Vendedor: G+S Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter: 185 mm<br/>turning length: 450 mm<br/>control: eltropilot epl2 <br/>bar material dia.: 65 mm<br/>cross movement: 190 mm<br/>feed: 5000 mm/min<br/>rapid traverse: 15 m/min<br/>spindle turning speed range: 25 - 4000 u/min<br/>main drive dc: 29 kw<br/>tool holder -shaft diameter: 40 mm<br/>total power requirement: 35 kw<br/>weight of the machine ca.: 5,5 t<br/>dimensions of the machine ca.:  m<br/>- with cnc control ep 20<br/>- tail stock<br/>- bar-loader fmb-turbo 3000-1700 lms,<br/>- 12 station turret with 6 driven tools<br/>- c-axis<br/>- bar magazin fmb-turbo model 3000-1700 lms<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 185 MM
TURNING LENGTH: 450 MM
CONTROL: ELTROPILOT EPL2
BAR MATERIAL DIA.: 65 MM
CROSS MOVEMENT: 190 MM
FEED: 5000 MM/MIN
RAPID TRAVERSE: 15 M/MIN
SPINDLE TURNING SPEED RANGE: 25 - 4000 U/MIN
MAIN DRIVE DC: 29 KW
TOOL HOLDER -SHAFT DIAMETER: 40 MM
TOTAL POWER REQUIREMENT: 35 KW
WEIGHT OF THE MACHINE CA.: 5,5 T
DIMENSIONS OF THE MACHINE CA.: M
- WITH CNC CONTROL EP 20
- TAIL STOCK
- BAR-LOADER FMB-TURBO 3000-1700 LMS,
- 12 STATION TURRET WITH 6 DRIVEN TOOLS
- C-AXIS
- BAR MAGAZIN FMB-TURBO MODEL 3000-1700 LMS





Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Precio: 22.780 €
Ubicación: Land-offered here is a lathe of manufacturer a.v.m angelini.
the machine is in good condition and may halls like in our be viewed and tested.

technical data:
manufacturer: a.v.m. angelini
type: snupy 21ti
year of construction: 1999

workspace:
round bed: 320 mm
circulation over carriage: 165 mm
tip height: 190 mm
distance between points: 600 mm
plan travel: 275 mm
longitudinal travel: 400 mm

main spindle:
spindle bore: 60 mm
bar bore: 42 mm
power: 15 kw
speed: 50-4500 rpm

counter spindle:
speed: 50-4500 rpm

feed drive:
rapid traverse x/z: 16/20 m / min

turret with 12 stations
chuck: vdi 30

machine dimensions:
3500 x 2000 x 2000 mm (without chip conveyor)
weight: 3500 kg (without chip conveyor)

bar loader fmb turbo 5-42xt
year of construction: 1999

maximum bar length: 3200 mm
total weight: 1000 kg
overall length: 3750 mm
total width: 600 mm
leasing/financing available. please enquire.

price excl. vat
free loading truck
for more information see also pictures or manufacturer's website.
sales invoice. the vat is shown separately on the invoice
visit any time by appointment only possible and desirable.
it used no guarantee or warranty.
delivery possible. please enquire
errors and omissions as well as subject to prior sale. OFFERED HERE IS A LATHE OF MANUFACTURER A.V.M ANGELINI. THE MACHINE IS IN GOOD CONDITION AND MAY HALLS LIKE IN OUR BE VIEWED AND TESTED. TECHNICAL DATA: MANUFACTURER: A.V.M. ANGELINI TYPE: SNUPY 21TI YEAR OF CONSTRUCTION: 1999 WORKSPACE: ROUND BED: 320 MM CIRCULATION OVER CARRIAGE: 165 MM TIP HEIGHT: 190 MM DISTANCE BETWEEN POINTS: 600 MM PLAN TRAVEL: 275 MM LONGITUDINAL TRAVEL: 400 MM MAIN SPINDLE: SPINDLE BORE: 60 MM BAR BORE: 42 MM POWER: 15 KW SPEED: 50-4500 RPM COUNTER SPINDLE: SPEED: 50-4500 RPM FEED DRIVE: RAPID TRAVERSE X/Z: 16/20 M / MIN TURRET WITH 12 STATIONS CHUCK: VDI 30 MACHINE DIMENSIONS: 3500 X 2000 X 2000 MM (WITHOUT CHIP CONVEYOR) WEIGHT: 3500 KG (WITHOUT CHIP CONVEYOR) BAR LOADER FMB TURBO 5-42XT YEAR OF CONSTRUCTION: 1999 MAXIMUM BAR LENGTH: 3200 MM TOTAL WEIGHT: 1000 KG OVERALL LENGTH: 3750 MM TOTAL WIDTH: 600 MM LEASING/FINANCING AVAILABLE. PLEASE ENQUIRE. PRICE EXCL. VAT FREE LOADING TRUCK FOR MORE INFORMATION SEE ALSO PICTURES OR MANUFACTURER'S WEBSITE. SALES INVOICE. THE VAT IS SHOWN SEPARATELY ON THE INVOICE VISIT ANY TIME BY APPOINTMENT ONLY POSSIBLE AND DESIRABLE. IT USED NO GUARANTEE OR WARRANTY. DELIVERY POSSIBLE. PLEASE ENQUIRE ERRORS AND OMISSIONS AS WELL AS SUBJECT TO PRIOR SALE.
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung
Año de construcción: usado
Ubicación: Land-working length: 295 mmtwin spindletwin turretincluding fmb turbo barfeeder 3000 mm WORKING LENGTH: 295 MMTWIN SPINDLETWIN TURRETINCLUDING FMB TURBO BARFEEDER 3000 MM
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-control tx 8i
bar diameter 12 mm
turning length 130 mm
main / sub spindle
spindle speed 12000 1 / min
6-station turrer with driven tools
y-axis
front- /back apparatur with 4 driven station each
bar loader fmb minimag 18   CONTROL TX 8I BAR DIAMETER 12 MM TURNING LENGTH 130 MM MAIN / SUB SPINDLE SPINDLE SPEED 12000 1 / MIN 6-STATION TURRER WITH DRIVEN TOOLS Y-AXIS FRONT- /BACK APPARATUR WITH 4 DRIVEN STATION EACH BAR LOADER FMB MINIMAG 18
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-<br>bar diameter (mm) <br>bar length (mm) 3200<br>number of bars loaded <br>
BAR DIAMETER (MM)
BAR LENGTH (MM) 3200
NUMBER OF BARS LOADED
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-code: 0489
brand: fmb - italy
model: b/1

sanding machine for edges  with 1 group for round, shaped and right raw and coated edges 

technical data:
electrically  tilting sanding group from +45 to -10 degrees   - speed variator 
max working height mm 100
min working lenght mm 120
advancing speed of the piece variable from 3 to 28 mt/min
working pressure 6-7  atm
panel support
 overall dimensions: mm 2300 x 1300 x 1300 h
weight kg 850


 CODE: 0489 BRAND: FMB - ITALY MODEL: B/1 SANDING MACHINE FOR EDGES WITH 1 GROUP FOR ROUND, SHAPED AND RIGHT RAW AND COATED EDGES TECHNICAL DATA: ELECTRICALLY TILTING SANDING GROUP FROM +45 TO -10 DEGREES - SPEED VARIATOR MAX WORKING HEIGHT MM 100 MIN WORKING LENGHT MM 120 ADVANCING SPEED OF THE PIECE VARIABLE FROM 3 TO 28 MT/MIN WORKING PRESSURE 6-7 ATM PANEL SUPPORT OVERALL DIMENSIONS: MM 2300 X 1300 X 1300 H WEIGHT KG 850
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-<br>bar diameter (mm) <br>bar length (mm) <br>number of bars loaded <br>
BAR DIAMETER (MM)
BAR LENGTH (MM)
NUMBER OF BARS LOADED
Vendedor: Muller Machines SA
Año de construcción: usado
Ubicación: Land-emco lathe cnc mod. turn 365 tc / bj. 98 / 310 x 520 / rods ã? 65 / 0 4,200 u min / 12 pocket tool turret / mk 4 / 18 kw / 20 m-min. / cnc siemens sinumrik 810 d / without tailstock / no angetriebenewerkzeuge / hours: 66.200 / extra: dividing head - bar feeder  fmb state mod turbo 10-65 / good
fe.gi.maschinen.sbg.at

emco lathe cnc mod turn 365 tc / year 98 / 310 x 520 / bars ã? 65 / 0-4,200 rpm / 12 tool turret / mk 4 / 18 kw / 20 m-min. / cnc siemens sinumerik 810 d / without tailstock / without power tools / hours: 66.200 / extra: dividing head - bar loading magazine fmb mod. turbo 10-6 5 / good condition
fe.gi.maschinen.sbg.at EMCO LATHE CNC MOD. TURN 365 TC / BJ. 98 / 310 X 520 / RODS &ATILDE;? 65 / 0 4,200 U MIN / 12 POCKET TOOL TURRET / MK 4 / 18 KW / 20 M-MIN. / CNC SIEMENS SINUMRIK 810 D / WITHOUT TAILSTOCK / NO ANGETRIEBENEWERKZEUGE / HOURS: 66.200 / EXTRA: DIVIDING HEAD - BAR FEEDER FMB STATE MOD TURBO 10-65 / GOOD FE.GI.MASCHINEN.SBG.AT EMCO LATHE CNC MOD TURN 365 TC / YEAR 98 / 310 X 520 / BARS &ATILDE;? 65 / 0-4,200 RPM / 12 TOOL TURRET / MK 4 / 18 KW / 20 M-MIN. / CNC SIEMENS SINUMERIK 810 D / WITHOUT TAILSTOCK / WITHOUT POWER TOOLS / HOURS: 66.200 / EXTRA: DIVIDING HEAD - BAR LOADING MAGAZINE FMB MOD. TURBO 10-6 5 / GOOD CONDITION FE.GI.MASCHINEN.SBG.AT
Vendedor: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools
Año de construcción: usado
Ubicación: Land-control fs 100
robot yaskawa 5 kg
schunk grab 2-fold
20 pallets size 600x400 mm
pneumatic turning station
workpiece sensor


  CONTROL FS 100 ROBOT YASKAWA 5 KG SCHUNK GRAB 2-FOLD 20 PALLETS SIZE 600X400 MM PNEUMATIC TURNING STATION WORKPIECE SENSOR
Vendedor: WMH24
Año de construcción: usado
Ubicación: Land-citizen cincom l25 (1998)

overview
brand: citizen
model: cincom l25
application type: turning
machine type: lathes
availability: immediately
production year: 1998
location: germany
origin country: japan
production hours: 69990

general data
measurements width: 2520 mm
measurements depth: 1100 mm
measurements height: 1700 mm
machine weight: 2500 kg

control unit
brand: mitsubishi
model: meldas 500
cnc main language: german
cnc language customizable: yes

main drive
number of spindles: 1
spindle speed range: 200-8000 rpm

movement
x-axis movement: 250 mm

tools
max tool diameter: 25 mm
max tool length: 250 mm

media
main electronic connection: 380 v
power consumption: 11 kva
chip conveyor: yes
internal cooling: yes

additional equipment
1: bar loader fmb turbo 5-42 CITIZEN CINCOM L25 (1998) OVERVIEW BRAND: CITIZEN MODEL: CINCOM L25 APPLICATION TYPE: TURNING MACHINE TYPE: LATHES AVAILABILITY: IMMEDIATELY PRODUCTION YEAR: 1998 LOCATION: GERMANY ORIGIN COUNTRY: JAPAN PRODUCTION HOURS: 69990 GENERAL DATA MEASUREMENTS WIDTH: 2520 MM MEASUREMENTS DEPTH: 1100 MM MEASUREMENTS HEIGHT: 1700 MM MACHINE WEIGHT: 2500 KG CONTROL UNIT BRAND: MITSUBISHI MODEL: MELDAS 500 CNC MAIN LANGUAGE: GERMAN CNC LANGUAGE CUSTOMIZABLE: YES MAIN DRIVE NUMBER OF SPINDLES: 1 SPINDLE SPEED RANGE: 200-8000 RPM MOVEMENT X-AXIS MOVEMENT: 250 MM TOOLS MAX TOOL DIAMETER: 25 MM MAX TOOL LENGTH: 250 MM MEDIA MAIN ELECTRONIC CONNECTION: 380 V POWER CONSUMPTION: 11 KVA CHIP CONVEYOR: YES INTERNAL COOLING: YES ADDITIONAL EQUIPMENT 1: BAR LOADER FMB TURBO 5-42
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-control of epl 4, with feeder fmb turbo.
turning length 600 mm
umlaufdurchm. bed 400 mm
forward screw 65 mm
speeds of 20-4000 rpm.
2 revolver with 12 tools vdi 30
approx. 29 kw
weight approx. 5.5 t
chip conveyors, chuck fabr. forkardt div tool holders, large number of collets, hydr. tailstock. CONTROL OF EPL 4, WITH FEEDER FMB TURBO. TURNING LENGTH 600 MM UMLAUFDURCHM. BED 400 MM FORWARD SCREW 65 MM SPEEDS OF 20-4000 RPM. 2 REVOLVER WITH 12 TOOLS VDI 30 APPROX. 29 KW WEIGHT APPROX. 5.5 T CHIP CONVEYORS, CHUCK FABR. FORKARDT DIV TOOL HOLDERS, LARGE NUMBER OF COLLETS, HYDR. TAILSTOCK.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-sanding machine for panel and profiles type fmb levig b1s
composed by n.2 units :
1st : sanding unit with inclinations and oscillation
entrance and getting out remote controlled of timer
motor power kw 2,2
2nd : brushing unit motor power kw 1,5
variable  feed speed 5-30 mt/1 min. ( motor with variator  kw 1,1 )
volt. 380/50 SANDING MACHINE FOR PANEL AND PROFILES TYPE FMB LEVIG B1S COMPOSED BY N.2 UNITS : 1ST : SANDING UNIT WITH INCLINATIONS AND OSCILLATION ENTRANCE AND GETTING OUT REMOTE CONTROLLED OF TIMER MOTOR POWER KW 2,2 2ND : BRUSHING UNIT MOTOR POWER KW 1,5 VARIABLE FEED SPEED 5-30 MT/1 MIN. ( MOTOR WITH VARIATOR KW 1,1 ) VOLT. 380/50
Vendedor: IMALL
Año de construcción: usado
Ubicación: Land-automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3ph
 AUTOMATIC MEAT BALL AND FISHBALL FORMING MACHINE, BEEF BALLS, PORK BALLS, FISH BALLS, SQUID BALLS, 400-600KGS HOUR, 18-35MM DIAMETER, STAINLESS MOBILE FRAME, 3PH
Vendedor: UFM
Año de construcción: usado
Ubicación: Land-8 main spindles, chucker afh130 for complete machining means front- and back side, control siemens sinumerik 840di, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading,
workpiece turn around station in pos. 4 , position 4 with workpiece length control, cnc compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures
option: ergomat tb42 fot cutting off for half finnishing with fmb-turbo   8 MAIN SPINDLES, CHUCKER AFH130 FOR COMPLETE MACHINING MEANS FRONT- AND BACK SIDE, CONTROL SIEMENS SINUMERIK 840DI, COMPLETE REVISING AND NEW CONFIGURATION OF THIS MACHINE IN YEAR 2010, LOADING ARM, FOR LOADING AND DISLOADING, WORKPIECE TURN AROUND STATION IN POS. 4 , POSITION 4 WITH WORKPIECE LENGTH CONTROL, CNC COMPOUND SLIDE IN POS. 5, COOLANT PUMP WITH MAGNET CANDLE FILTER, TOOLING: COULD BE DIFFERENT LIKE PICTURES OPTION: ERGOMAT TB42 FOT CUTTING OFF FOR HALF FINNISHING WITH FMB-TURBO
Vendedor: TAR-Maschinen OHG - Vierkotten
Año de construcción: usado
Ubicación: Land-for the cutting of aluminium profiles, max. infeed rod length: 7500mm, max. output rod length: 6000mm, max. profile width: 175mm, max. profile height: 100mm.  FOR THE CUTTING OF ALUMINIUM PROFILES, MAX. INFEED ROD LENGTH: 7500MM, MAX. OUTPUT ROD LENGTH: 6000MM, MAX. PROFILE WIDTH: 175MM, MAX. PROFILE HEIGHT: 100MM.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-insert robot fmb university robot year 2004 INSERT ROBOT FMB UNIVERSITY ROBOT YEAR 2004
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-technical data<br/>  axis 4 piece<br/>  spindle bore 24 mm<br/>  line speed 32 m / min<br/>  guide bushing (synchronously driven) 22.001 central lubrication with level monitoring coolant capacity 240 l / 1.5 bar main spindle<br/>  forward 20 mm<br/>  spindle stock stroke 220 mm<br/>  speed main spindle 0-6,000 rpm<br/>  performance main spindle 3.7 / 5,5 kw<br/>  145e counter spindle collet forward 20 mm<br/>  max travel (z) 220 mm<br/>  speed spindle 0-6,000 rpm<br/>  counter spindle 1.1 kw<br/>  collet 145e cross working drill support 3 x Ø 25 mm<br/>  basic holder for buts 6 pieces 12 x 12 power supply operating voltage ac 220 v 50 hz.<br/>  control voltage dc 24 v total nominal power 16 kw<br/>  total rated current of 60 a.<br/>  circuit diagram no.  1303 - e200 accessories outlet long parts fmb bar feeder 3-26 with 4 meters length machine dimensions dimensions l x w x h machine 3,600 x 1,600 x 2,100 mm<br/>  weight of the machine ca  3,800 kg TECHNICAL DATA
AXIS 4 PIECE
SPINDLE BORE 24 MM
LINE SPEED 32 M / MIN
GUIDE BUSHING (SYNCHRONOUSLY DRIVEN) 22.001 CENTRAL LUBRICATION WITH LEVEL MONITORING COOLANT CAPACITY 240 L / 1.5 BAR MAIN SPINDLE
FORWARD 20 MM
SPINDLE STOCK STROKE 220 MM
SPEED MAIN SPINDLE 0-6,000 RPM
PERFORMANCE MAIN SPINDLE 3.7 / 5,5 KW
145E COUNTER SPINDLE COLLET FORWARD 20 MM
MAX TRAVEL (Z) 220 MM
SPEED SPINDLE 0-6,000 RPM
COUNTER SPINDLE 1.1 KW
COLLET 145E CROSS WORKING DRILL SUPPORT 3 X Ø 25 MM
BASIC HOLDER FOR BUTS 6 PIECES 12 X 12 POWER SUPPLY OPERATING VOLTAGE AC 220 V 50 HZ.
CONTROL VOLTAGE DC 24 V TOTAL NOMINAL POWER 16 KW
TOTAL RATED CURRENT OF 60 A.
CIRCUIT DIAGRAM NO. 1303 - E200 ACCESSORIES OUTLET LONG PARTS FMB BAR FEEDER 3-26 WITH 4 METERS LENGTH MACHINE DIMENSIONS DIMENSIONS L X W X H MACHINE 3,600 X 1,600 X 2,100 MM
WEIGHT OF THE MACHINE CA 3,800 KG
Vendedor: Arnd Sauter GmbH
Año de construcción: usado
Ubicación: Land-the machine is in good technical condition, after agreement possibility of testing. system 1-. main spindle transitionsspindel max d 32 mm spindle in the spindle 220 mm max maximum speed 6000 u / min on the main spindle 100% / 60% ed of 3.7 / 5,5 kw clamping system to lead 145 e. case 22001 2 system. gear spindle spindle max d 32 mm maximum speed of 6000 u / min on the main spindle of 100 / 60% ed of 3.7 / 5.5 kw clamping system 145 e system 3 - front runner number - 4 z the powered - 4 output on the main spindle of 100 / 60% ed of 1.1 / 5.5 kw machines dimensions 2,300 x 1,500 x 1,900 mm weight of machine 3,800 kg tool instead of linear cross tool slide of the main spindle : - rotational stations 16 5 x 16 mm - 4 powered spindles stations including feedback processing - slide 4 driven tools options: y2 - axis with driven tools 6 + 3 seats instrumental work space on the opposite side: rear slide - 4 power plant accessories: feeder rods fmb 5-55 / 3200, 140 bar high pressure pump with a filtration paper and cooling systems hyfra THE MACHINE IS IN GOOD TECHNICAL CONDITION, AFTER AGREEMENT POSSIBILITY OF TESTING. SYSTEM 1-. MAIN SPINDLE TRANSITIONSSPINDEL MAX D 32 MM SPINDLE IN THE SPINDLE 220 MM MAX MAXIMUM SPEED 6000 U / MIN ON THE MAIN SPINDLE 100% / 60% ED OF 3.7 / 5,5 KW CLAMPING SYSTEM TO LEAD 145 E. CASE 22001 2 SYSTEM. GEAR SPINDLE SPINDLE MAX D 32 MM MAXIMUM SPEED OF 6000 U / MIN ON THE MAIN SPINDLE OF 100 / 60% ED OF 3.7 / 5.5 KW CLAMPING SYSTEM 145 E SYSTEM 3 - FRONT RUNNER NUMBER - 4 Z THE POWERED - 4 OUTPUT ON THE MAIN SPINDLE OF 100 / 60% ED OF 1.1 / 5.5 KW MACHINES DIMENSIONS 2,300 X 1,500 X 1,900 MM WEIGHT OF MACHINE 3,800 KG TOOL INSTEAD OF LINEAR CROSS TOOL SLIDE OF THE MAIN SPINDLE : - ROTATIONAL STATIONS 16 5 X 16 MM - 4 POWERED SPINDLES STATIONS INCLUDING FEEDBACK PROCESSING - SLIDE 4 DRIVEN TOOLS OPTIONS: Y2 - AXIS WITH DRIVEN TOOLS 6 + 3 SEATS INSTRUMENTAL WORK SPACE ON THE OPPOSITE SIDE: REAR SLIDE - 4 POWER PLANT ACCESSORIES: FEEDER RODS FMB 5-55 / 3200, 140 BAR HIGH PRESSURE PUMP WITH A FILTRATION PAPER AND COOLING SYSTEMS HYFRA
Vendedor: CEE-Machines
Año de construcción: usado
Precio: 6.890 €
Ubicación: Land-fm-racine fmb 61 hydraulic briquetting press

for briquette diameter 61 mm
performance approx. 150 kg / hour
l x w x h: 120 x 80 x 110 weight 800 kg
built in 1990

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden matec systems + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12      

      FM-RACINE FMB 61 HYDRAULIC BRIQUETTING PRESS FOR BRIQUETTE DIAMETER 61 MM PERFORMANCE APPROX. 150 KG / HOUR L X W X H: 120 X 80 X 110 WEIGHT 800 KG BUILT IN 1990 THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEMS + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Ubicación: Land-machine with double head s 2/160-350. pin up to 160 mm, distance between centres 350 mm. with pwds.
clamping force 400 kn. platen size 700 x 830 mm. (lxw) opening 900 mm. extruder 100/25 d MACHINE WITH DOUBLE HEAD S 2/160-350. PIN UP TO 160 MM, DISTANCE BETWEEN CENTRES 350 MM. WITH PWDS. CLAMPING FORCE 400 KN. PLATEN SIZE 700 X 830 MM. (LXW) OPENING 900 MM. EXTRUDER 100/25 D
Vendedor: UES - Universal Extrusion Service
Año de construcción: usado
Ubicación: Land-output: 280kg/h, clamping force: 400kn, installation height: 500mm, opening stroke: 900mm, dimensions clamping plates: 700x830mm, drive power: 129kw, heat output: 43.1kw, connected load: 172.1kw, operational hours: 70000h.  OUTPUT: 280KG/H, CLAMPING FORCE: 400KN, INSTALLATION HEIGHT: 500MM, OPENING STROKE: 900MM, DIMENSIONS CLAMPING PLATES: 700X830MM, DRIVE POWER: 129KW, HEAT OUTPUT: 43.1KW, CONNECTED LOAD: 172.1KW, OPERATIONAL HOURS: 70000H.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-control system:siemens sinumerik 810m	
pallet changer:	
2 x interchangetable:(integration plate-peiseler)	
4 axis on each table	
axes:5 / siemens	
travel:	
x: 630 mm	
y: 400 mm	
z: 425 mm	
tool changer positions:20	
clamping surface:1250x850 mm	
number of spindles:1	
spindle speed infinitely: 20 -6000 rpm	
rapid traverse:20 m / min	
tool holder:sk 40	
power supply:3ac400v	
machine weight:5500 kg	
machine dimensions:1800 x 3400 x 2.900 mm	
hydraulics:fmb	
switch cabinet cooler: rittal	
extraction system: handte	
chip conveyor:knoll	
coolant:knoll	
main spindle:kessler	
screw conveyor: bauer	
hs cooling fan: kessler	
2xdrive heads  CONTROL SYSTEM:SIEMENS SINUMERIK 810M PALLET CHANGER: 2 X INTERCHANGETABLE:(INTEGRATION PLATE-PEISELER) 4 AXIS ON EACH TABLE AXES:5 / SIEMENS TRAVEL: X: 630 MM Y: 400 MM Z: 425 MM TOOL CHANGER POSITIONS:20 CLAMPING SURFACE:1250X850 MM NUMBER OF SPINDLES:1 SPINDLE SPEED INFINITELY: 20 -6000 RPM RAPID TRAVERSE:20 M / MIN TOOL HOLDER:SK 40 POWER SUPPLY:3AC400V MACHINE WEIGHT:5500 KG MACHINE DIMENSIONS:1800 X 3400 X 2.900 MM HYDRAULICS:FMB SWITCH CABINET COOLER: RITTAL EXTRACTION SYSTEM: HANDTE CHIP CONVEYOR:KNOLL COOLANT:KNOLL MAIN SPINDLE:KESSLER SCREW CONVEYOR: BAUER HS COOLING FAN: KESSLER 2XDRIVE HEADS
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: iso 40 spindle speeds: 60-2700 rpm spindle drive: 10 kw electr. supply: 380 v, 20 kva kw space: 3200 x 2800 x 2650 mm weight: 7.3 t 
 TABLE SIZE: 500 X 1200 MM TRAVERSE PATH X: 1000 MM STROKE Y: 550 MM TRAVERSE PATH Z: 600 MM SPINDLE RETAINER: ISO 40 SPINDLE SPEEDS: 60-2700 RPM SPINDLE DRIVE: 10 KW ELECTR. SUPPLY: 380 V, 20 KVA KW SPACE: 3200 X 2800 X 2650 MM WEIGHT: 7.3 T
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-single station machine with 12 - foldhead 100mm between center. extruder 100/24, immediately free year 1999. SINGLE STATION MACHINE WITH 12 - FOLDHEAD 100MM BETWEEN CENTER. EXTRUDER 100/24, IMMEDIATELY FREE YEAR 1999.
Vendedor: UES - Universal Extrusion Service
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FMB types: