81 ofertas

Año de construcción: usado
Ubicación: Land-description:
3 - jaw chuck forkardt 315 mm
quick change toolpost multifix
rapid traverse
unfortunately no chip tray
coolant reservoir

technical data

tip height 300 mm
top width 2000 mm
spindle bore 108 mm
spindle speeds 31.5-1400 u. / min.
feeds along 0.08 1.06 mm / rev.	
feed plan 0.037 - 0.53 mm / rev. DESCRIPTION: 3 - JAW CHUCK FORKARDT 315 MM QUICK CHANGE TOOLPOST MULTIFIX RAPID TRAVERSE UNFORTUNATELY NO CHIP TRAY COOLANT RESERVOIR TECHNICAL DATA TIP HEIGHT 300 MM TOP WIDTH 2000 MM SPINDLE BORE 108 MM SPINDLE SPEEDS 31.5-1400 U. / MIN. FEEDS ALONG 0.08 1.06 MM / REV. FEED PLAN 0.037 - 0.53 MM / REV.
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 720 mm<br/>turning diameter over slide rest: 500 mm<br/>turning length: 3000 mm<br/>turning dia. in gap: 800 mm<br/>spindle bore: 60 mm<br/>feed speeds: 1,25 mm/u<br/>turning speeds: 1500 u/min<br/>dimensions: 5,3 x 1,0 x 1,6 m<br/>weight of the machine ca.: 6,0 t<br/>konv. lathe in good condition<br/>- 3- jaw chuck forkardt Ø 315 mm<br/>- 3- jaw chuck Ø 500 mm<br/>- steady<br/>- work light<br/>- some toolhoolder multifix c<br/>- some sets of jaws<br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 720 MM
TURNING DIAMETER OVER SLIDE REST: 500 MM
TURNING LENGTH: 3000 MM
TURNING DIA. IN GAP: 800 MM
SPINDLE BORE: 60 MM
FEED SPEEDS: 1,25 MM/U
TURNING SPEEDS: 1500 U/MIN
DIMENSIONS: 5,3 X 1,0 X 1,6 M
WEIGHT OF THE MACHINE CA.: 6,0 T
KONV. LATHE IN GOOD CONDITION
- 3- JAW CHUCK FORKARDT Ø 315 MM
- 3- JAW CHUCK Ø 500 MM
- STEADY
- WORK LIGHT
- SOME TOOLHOOLDER MULTIFIX C
- SOME SETS OF JAWS





Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe cycles fabr.vdf boehringer type: duc560 bj. 1993
control siemens sinumerik 805t.

turning length: 1000 mm

turning diameter over plan support: 365 mm
turning diameter ã¼berbett: 570 mm

spindle speeds: 3-2500u/min spindle motor: 19kw
spindle bore: 62 mm

chuck diameter: 315 mm forkardt tool turret with 8 pos. vdi40

with accessories and equipment documentation.  CNC LATHE CYCLES FABR.VDF BOEHRINGER TYPE: DUC560 BJ. 1993 CONTROL SIEMENS SINUMERIK 805T. TURNING LENGTH: 1000 MM TURNING DIAMETER OVER PLAN SUPPORT: 365 MM TURNING DIAMETER &ATILDE;&FRAC14;BERBETT: 570 MM SPINDLE SPEEDS: 3-2500U/MIN SPINDLE MOTOR: 19KW SPINDLE BORE: 62 MM CHUCK DIAMETER: 315 MM FORKARDT TOOL TURRET WITH 8 POS. VDI40 WITH ACCESSORIES AND EQUIPMENT DOCUMENTATION.
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Ubicación: Land-turning diameter: 810 mm<br/>turning length: 3000 mm<br/>turning diameter over slide: 510 mm<br/>turning dia. in gap: 880 mm<br/>control: siemens 850 t <br/>turning speeds: 1800 u/min<br/>drive motor: 27 kw<br/>spindle bore: 105 mm<br/>range l-w-h: 6,5 x 2,4 x 1,95 mm<br/>weight of the machine ca.: 6,5 t<br/>used teach in lathe with stabil construction<br/><br/>- 3- ja chuck forkardt Ø 400 mm<br/>- multifixhalter size c<br/>- machine light<br/>- chip conveyor<br/>- some jaws<br/>- some tool holder multifix<br/>- block for bore bars<br/>- machine feets<br/><br/><br/><br/><br/> TURNING DIAMETER: 810 MM
TURNING LENGTH: 3000 MM
TURNING DIAMETER OVER SLIDE: 510 MM
TURNING DIA. IN GAP: 880 MM
CONTROL: SIEMENS 850 T
TURNING SPEEDS: 1800 U/MIN
DRIVE MOTOR: 27 KW
SPINDLE BORE: 105 MM
RANGE L-W-H: 6,5 X 2,4 X 1,95 MM
WEIGHT OF THE MACHINE CA.: 6,5 T
USED TEACH IN LATHE WITH STABIL CONSTRUCTION

- 3- JA CHUCK FORKARDT Ø 400 MM
- MULTIFIXHALTER SIZE C
- MACHINE LIGHT
- CHIP CONVEYOR
- SOME JAWS
- SOME TOOL HOLDER MULTIFIX
- BLOCK FOR BORE BARS
- MACHINE FEETS




Vendedor: Klaus Rosenboom GmbH
Año de construcción: usado
Precio: 11.500 €
Ubicación: Land-travel longitudinal 1400 mm
travel cross           1000 mm
travel vertical of beam 965 mm
travel vertical of spindle carriage 300 mm
table                        1300 x 800 mm
max. work piece diameter while round milling 3000 mm
max. table load            1000 kg
tool taper                     iso 40
spindle speed              45 - 2800 r./min.
length appr.                 3 m
width appr.                  2,5 m
height                         3,025 m
weight                         4,7 t
connected power       5,5 kw

facilities:
table rotatable 360° with hydromechanic drive
stand heightening 300 mm
dro heidenhain positip 850
elektric tool clamping forkardt
hydraulic unit
hydraulic central clamping
hydromechanic feed of milling carriage
automatic central lubrication system  TRAVEL LONGITUDINAL 1400 MM TRAVEL CROSS 1000 MM TRAVEL VERTICAL OF BEAM 965 MM TRAVEL VERTICAL OF SPINDLE CARRIAGE 300 MM TABLE 1300 X 800 MM MAX. WORK PIECE DIAMETER WHILE ROUND MILLING 3000 MM MAX. TABLE LOAD 1000 KG TOOL TAPER ISO 40 SPINDLE SPEED 45 - 2800 R./MIN. LENGTH APPR. 3 M WIDTH APPR. 2,5 M HEIGHT 3,025 M WEIGHT 4,7 T CONNECTED POWER 5,5 KW FACILITIES: TABLE ROTATABLE 360° WITH HYDROMECHANIC DRIVE STAND HEIGHTENING 300 MM DRO HEIDENHAIN POSITIP 850 ELEKTRIC TOOL CLAMPING FORKARDT HYDRAULIC UNIT HYDRAULIC CENTRAL CLAMPING HYDROMECHANIC FEED OF MILLING CARRIAGE AUTOMATIC CENTRAL LUBRICATION SYSTEM
Vendedor: Norbert Gottwald Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-weight approx.: 6500 kg<br/>dimensions (l x w x h) approx.: 5500 x 1800 x 2000 mm<br/>description: machine no. 1224, max. workpiece diameter 100 mm, max. workpiece length 3000 mm, thread pitch 2 up to 100 mm, spindle bore 82 mm, 3 up to 90 rpm, motor drive power 4,5 kw, with 2 tool cabinets lista, 1430 x 630 x 1090 mm, each with 2 sliding doors and drawers with special accessories for the thread whirling device linsinger lgs 01, large documentation in german language, with forkardt f 315 chuck, separate control cabinet, size: 1000 x 300 x 1600 mm. for further data, please refer to the copy of the machine card attached as pdf. WEIGHT APPROX.: 6500 KG
DIMENSIONS (L X W X H) APPROX.: 5500 X 1800 X 2000 MM
DESCRIPTION: MACHINE NO. 1224, MAX. WORKPIECE DIAMETER 100 MM, MAX. WORKPIECE LENGTH 3000 MM, THREAD PITCH 2 UP TO 100 MM, SPINDLE BORE 82 MM, 3 UP TO 90 RPM, MOTOR DRIVE POWER 4,5 KW, WITH 2 TOOL CABINETS LISTA, 1430 X 630 X 1090 MM, EACH WITH 2 SLIDING DOORS AND DRAWERS WITH SPECIAL ACCESSORIES FOR THE THREAD WHIRLING DEVICE LINSINGER LGS 01, LARGE DOCUMENTATION IN GERMAN LANGUAGE, WITH FORKARDT F 315 CHUCK, SEPARATE CONTROL CABINET, SIZE: 1000 X 300 X 1600 MM. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-with offset and hardened guideways of bed and 2-axis digital display.
tip height 180/250 mm
top width 1000 mm
speed range of 54-2000 rpm.
spindle bore 40 mm
3 - jaw chuck forkardt f 160
tailstock mount mt 4
performance approx. 2,2 kw
weight approx. 1,1 t
accessories: running with punched points, coolant pump, multi fix steel bracket. WITH OFFSET AND HARDENED GUIDEWAYS OF BED AND 2-AXIS DIGITAL DISPLAY. TIP HEIGHT 180/250 MM TOP WIDTH 1000 MM SPEED RANGE OF 54-2000 RPM. SPINDLE BORE 40 MM 3 - JAW CHUCK FORKARDT F 160 TAILSTOCK MOUNT MT 4 PERFORMANCE APPROX. 2,2 KW WEIGHT APPROX. 1,1 T ACCESSORIES: RUNNING WITH PUNCHED POINTS, COOLANT PUMP, MULTI FIX STEEL BRACKET.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 3800 kg<br/>dimensions (l x w x h) approx.: 4000 x 1525 x 1750 mm<br/>description: centre height over flat track 240 mm, max. swing diameter over bed 500 mm, over support 285 mm, bed witdth 360 mm, distance between centres 1500 mm, spindle head according to din 5527 size 6, spindle diameter at front bearing 100 mm, diameter of spindle bore 62 mm, 24 spindle speed from 11,2 up to 2240 rpm, 60 longitudinal feeds from 0,06 up to 56 mm/r, 60 cross feeds from 0,03 up to 28 mm/r, 60 metrical thread pitches from 0,25 up to 224 mm, 60 zoll threads from 112 up to 0,125 gears to 1, 1 fixed and 1 rotating steady rest, opening of fixed steady rest approx. 120 mm, 1 pallet of accessories, 25 multifix quick-change steel holder inserts, 6 sets of jaws, mainly base jaws and soft top jaws, digital read out heidenhain for multifix ground holder size b, clamping device protection, chip protection wall, central lubrication, machine light, 3-jaw chuck forkardt f 315, german documentation WEIGHT APPROX.: 3800 KG
DIMENSIONS (L X W X H) APPROX.: 4000 X 1525 X 1750 MM
DESCRIPTION: CENTRE HEIGHT OVER FLAT TRACK 240 MM, MAX. SWING DIAMETER OVER BED 500 MM, OVER SUPPORT 285 MM, BED WITDTH 360 MM, DISTANCE BETWEEN CENTRES 1500 MM, SPINDLE HEAD ACCORDING TO DIN 5527 SIZE 6, SPINDLE DIAMETER AT FRONT BEARING 100 MM, DIAMETER OF SPINDLE BORE 62 MM, 24 SPINDLE SPEED FROM 11,2 UP TO 2240 RPM, 60 LONGITUDINAL FEEDS FROM 0,06 UP TO 56 MM/R, 60 CROSS FEEDS FROM 0,03 UP TO 28 MM/R, 60 METRICAL THREAD PITCHES FROM 0,25 UP TO 224 MM, 60 ZOLL THREADS FROM 112 UP TO 0,125 GEARS TO 1, 1 FIXED AND 1 ROTATING STEADY REST, OPENING OF FIXED STEADY REST APPROX. 120 MM, 1 PALLET OF ACCESSORIES, 25 MULTIFIX QUICK-CHANGE STEEL HOLDER INSERTS, 6 SETS OF JAWS, MAINLY BASE JAWS AND SOFT TOP JAWS, DIGITAL READ OUT HEIDENHAIN FOR MULTIFIX GROUND HOLDER SIZE B, CLAMPING DEVICE PROTECTION, CHIP PROTECTION WALL, CENTRAL LUBRICATION, MACHINE LIGHT, 3-JAW CHUCK FORKARDT F 315, GERMAN DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can -.
04-03-238
shipping time: immediately

number: 04-03-238

manufacturer: weiler
type: can

machine data
year built: approx 1980
l x w x h: approx. 2700 x 1200 x 1800 mm
weight: 1500 kg

good general condition

technical data
digital display: 3 - axes - digital display (new)

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm

maximum turning diameter over support: approx. ã? 190 mm

maximum turning length: approx. 1000 mm

bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 25-2000 rpm

spindle nose: a 2 - 6

power: approx. 4,0 kw

automatic longitudinal & plan vorschuebe:
feed range: approx. 0.013 1,253 mm / rev

suitable for threads: - metric 0.35-12 mm

"- inch 44-2 gg /"

-diametral - pitch threaded 88-5 dp

-module 0.2-4

tailstock: mk 4

accessories
â?¢ 3 - bake - chuck ã? 200 mm (forkardt - wedge bar)

â?¢ quick change toolpost + 3 inserts

â?¢ bed fence

â?¢ complete machine documentation

â?¢ various wrenches

â?¢ machine feet

â?¢ coolant system

â?¢ electric chuck guard

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN -. 04-03-238 SHIPPING TIME: IMMEDIATELY NUMBER: 04-03-238 MANUFACTURER: WEILER TYPE: CAN MACHINE DATA YEAR BUILT: APPROX 1980 L X W X H: APPROX. 2700 X 1200 X 1800 MM WEIGHT: 1500 KG GOOD GENERAL CONDITION TECHNICAL DATA DIGITAL DISPLAY: 3 - AXES - DIGITAL DISPLAY (NEW) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 25-2000 RPM SPINDLE NOSE: A 2 - 6 POWER: APPROX. 4,0 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROX. 0.013 1,253 MM / REV SUITABLE FOR THREADS: - METRIC 0.35-12 MM "- INCH 44-2 GG /" -DIAMETRAL - PITCH THREADED 88-5 DP -MODULE 0.2-4 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 200 MM (FORKARDT - WEDGE BAR) &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 3 INSERTS &ACIRC;?&CENT; BED FENCE &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; MACHINE FEET &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; ELECTRIC CHUCK GUARD OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-weight approx.: 7300 kg<br/>dimensions (l x w x h) approx.: 5000 x 2800 x 2550 mm<br/>description: swing diameter over bed 840 mm, over support 515 mm, turning diameter at gap 900 mm, centre height 400 mm, centre length 2000 mm, 24 main spindle speeds from 7,1 up to 1400 rpm, spindle bore 100 mm, with forkardt 3-jaw chuck f 400 and several jaws, 4-fold steel holder, coolant unit, machine light, foldable chuck protection, live centre, face plate 800 mm diameter with additional jaws, heidenhain digital read out for longitudinal and cross axis, drive power 22 kw, with large set of clamping jaws, with documentation WEIGHT APPROX.: 7300 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 2800 X 2550 MM
DESCRIPTION: SWING DIAMETER OVER BED 840 MM, OVER SUPPORT 515 MM, TURNING DIAMETER AT GAP 900 MM, CENTRE HEIGHT 400 MM, CENTRE LENGTH 2000 MM, 24 MAIN SPINDLE SPEEDS FROM 7,1 UP TO 1400 RPM, SPINDLE BORE 100 MM, WITH FORKARDT 3-JAW CHUCK F 400 AND SEVERAL JAWS, 4-FOLD STEEL HOLDER, COOLANT UNIT, MACHINE LIGHT, FOLDABLE CHUCK PROTECTION, LIVE CENTRE, FACE PLATE 800 MM DIAMETER WITH ADDITIONAL JAWS, HEIDENHAIN DIGITAL READ OUT FOR LONGITUDINAL AND CROSS AXIS, DRIVE POWER 22 KW, WITH LARGE SET OF CLAMPING JAWS, WITH DOCUMENTATION
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cycle lathe cnc fabr.weiler type: e50/1 bj. 1999
control siemens/hamlet feed 250mm forkardt, multi fix size: c with 5 stop pockets
coolant system, complete documentation available.

turning diameter over bed: 570 mm
turning diameter over plan support: 340 mm
turning length: 1000 mm

spindle speeds: 1-2500u/min
total power: 20kw
spindle bore: 66 mm
 
machine tool and mould making
machine is in good condition under current vorfã¼hrbar. CYCLE LATHE CNC FABR.WEILER TYPE: E50/1 BJ. 1999 CONTROL SIEMENS/HAMLET FEED 250MM FORKARDT, MULTI FIX SIZE: C WITH 5 STOP POCKETS COOLANT SYSTEM, COMPLETE DOCUMENTATION AVAILABLE. TURNING DIAMETER OVER BED: 570 MM TURNING DIAMETER OVER PLAN SUPPORT: 340 MM TURNING LENGTH: 1000 MM SPINDLE SPEEDS: 1-2500U/MIN TOTAL POWER: 20KW SPINDLE BORE: 66 MM MACHINE TOOL AND MOULD MAKING MACHINE IS IN GOOD CONDITION UNDER CURRENT VORF&ATILDE;&FRAC14;HRBAR.
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Ubicación: Land-weight approx.: 3000 kg<br/>dimensions (l x w x h) approx.: 5500 x 1400 x 1850 mm<br/>description: max. swing diameter over bed 480 mm, over bed slide 295 mm, spindle head according to din 55022 size 6, spindle bore 56 mm, tailstock taper mk 4, 90 up to 500 rpm, 5,5 kw, with inner thread-wirbelwhirling device burgsmÜller hw 1, 3-jaw chuck forkardt f 315, fixed steady rest for workpiece opening approx. 130 mm, machine light, rearward chip protection, rapid traverse, threading gauge, additional tool cabinet lista with 2 sliding doors, content of accessories for inner thread-whirling device, cabinet dimensions 1430 x 650 x 1100 mm, german documentation. for further data, please refer to the copy of the machine card attached as pdf. WEIGHT APPROX.: 3000 KG
DIMENSIONS (L X W X H) APPROX.: 5500 X 1400 X 1850 MM
DESCRIPTION: MAX. SWING DIAMETER OVER BED 480 MM, OVER BED SLIDE 295 MM, SPINDLE HEAD ACCORDING TO DIN 55022 SIZE 6, SPINDLE BORE 56 MM, TAILSTOCK TAPER MK 4, 90 UP TO 500 RPM, 5,5 KW, WITH INNER THREAD-WIRBELWHIRLING DEVICE BURGSMÜLLER HW 1, 3-JAW CHUCK FORKARDT F 315, FIXED STEADY REST FOR WORKPIECE OPENING APPROX. 130 MM, MACHINE LIGHT, REARWARD CHIP PROTECTION, RAPID TRAVERSE, THREADING GAUGE, ADDITIONAL TOOL CABINET LISTA WITH 2 SLIDING DOORS, CONTENT OF ACCESSORIES FOR INNER THREAD-WHIRLING DEVICE, CABINET DIMENSIONS 1430 X 650 X 1100 MM, GERMAN DOCUMENTATION. FOR FURTHER DATA, PLEASE REFER TO THE COPY OF THE MACHINE CARD ATTACHED AS PDF.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cnc lathe cycles fabr.weiler type: e50/1 bj. 1997
control system siemens 805 / hamlet
with forkardt feed 250mm multi fix holder size: b
chip conveyor, complete machine documentation available machine
under current vorfã¼hrbar.

turning diameter: excess bed: 570 mm
turning diameter: ã¼berplansupport: 340 mm
turning length: 1000 mm

spindle bore: 66 mm
spindle speeds: 1-2500u/min
total power: 20kw
 CNC LATHE CYCLES FABR.WEILER TYPE: E50/1 BJ. 1997 CONTROL SYSTEM SIEMENS 805 / HAMLET WITH FORKARDT FEED 250MM MULTI FIX HOLDER SIZE: B CHIP CONVEYOR, COMPLETE MACHINE DOCUMENTATION AVAILABLE MACHINE UNDER CURRENT VORF&ATILDE;&FRAC14;HRBAR. TURNING DIAMETER: EXCESS BED: 570 MM TURNING DIAMETER: &ATILDE;&FRAC14;BERPLANSUPPORT: 340 MM TURNING LENGTH: 1000 MM SPINDLE BORE: 66 MM SPINDLE SPEEDS: 1-2500U/MIN TOTAL POWER: 20KW
Vendedor: IMDAT-WERKZEUGMASCHINENHANDEL
Año de construcción: usado
Ubicación: Land-diameter: 500 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>15 pieces three-jaw, four-jaw chuck and face plates Ø 200 - 500 mm,<br/>among other things forkardt f 315, forkardt f 400, smw hg 250, <br/>smw hg 400, rÖhm 4-jaw chuck Ø 400, rÖhm face plate Ø 500 and many more.<br/><br/><br/><br/><br/> DIAMETER: 500 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
15 PIECES THREE-JAW, FOUR-JAW CHUCK AND FACE PLATES Ø 200 - 500 MM,
AMONG OTHER THINGS FORKARDT F 315, FORKARDT F 400, SMW HG 250,
SMW HG 400, RÖHM 4-JAW CHUCK Ø 400, RÖHM FACE PLATE Ø 500 AND MANY MORE.




Vendedor: EKW Werkzeugmaschinen AG & Co. KG
Año de construcción: usado
Ubicación: Land-top width 800 mm
tip height a.s.l. bed 180 mm
circulation ã? above bed 380 mm
circulation ã? above slide 200 mm
spindle hole 52 mm
speed range 33-1.500 u/min

accessories:
3 bake forkardt chucks ã? 200 mm
digital display of the axes
coolant system
spindle safety cover
tailstock
multifix tool holder dimensions: (lxwxh) 0.95 m x 2.00 m x 1.38 m
weight approx. 1,2 t

the fixators are not part of the sale. TOP WIDTH 800 MM TIP HEIGHT A.S.L. BED 180 MM CIRCULATION &ATILDE;? ABOVE BED 380 MM CIRCULATION &ATILDE;? ABOVE SLIDE 200 MM SPINDLE HOLE 52 MM SPEED RANGE 33-1.500 U/MIN ACCESSORIES: 3 BAKE FORKARDT CHUCKS &ATILDE;? 200 MM DIGITAL DISPLAY OF THE AXES COOLANT SYSTEM SPINDLE SAFETY COVER TAILSTOCK MULTIFIX TOOL HOLDER DIMENSIONS: (LXWXH) 0.95 M X 2.00 M X 1.38 M WEIGHT APPROX. 1,2 T THE FIXATORS ARE NOT PART OF THE SALE.
Vendedor: KW Maschinen GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 26.900 €
Ubicación: Land-weight approx.: 8200 kg<br/>dimensions (l x w x h) approx.: 7700 x 2300 x 2000 mm<br/>description: - distance between centres: 3950 mm<br> -max. swing diameter: 830 mm<br> - swing diameter over cross slide: 540 mm<br> - travel of cross slide: 450 mm<br> - spindle head (din 55027): size 11<br> - spindle diameter at front bearing: 180 mm<br> - material passages (max.): 130 mm<br> - collet chuck diameter (standard): 315/400 mm<br> - speed range: 2 - 1600 rpm<br> <br> tailstock:<br> - external diameter of quill: 125 mm<br> - quill stroke (max.): 200 mm<br> - internal taper: mk 6<br> <br> - order number: 08122971<br> - serial no.: 469/02<br> - with siemens control system<br> - machine is equipped with a forkardt three-jaw chuck, one tailstock as well as a chip conveyor mayfran, serial no.: p01 01m6864 01<br> - included in delivery is a big lot of machine accessories. consisting of: four steady rests, seven multifix holders, as well as further lathe accessories<br> - with complete documentation as well as operating instructions<br> - read off operating hours approx.: 6540<br> - important note: the company hdc huttelmayer conducted a retrofit in april 2014.<br> - the machine has to be picked up on 13th or 14th of may 2019<br> - see video as well as pdf WEIGHT APPROX.: 8200 KG
DIMENSIONS (L X W X H) APPROX.: 7700 X 2300 X 2000 MM
DESCRIPTION: - DISTANCE BETWEEN CENTRES: 3950 MM
-MAX. SWING DIAMETER: 830 MM
- SWING DIAMETER OVER CROSS SLIDE: 540 MM
- TRAVEL OF CROSS SLIDE: 450 MM
- SPINDLE HEAD (DIN 55027): SIZE 11
- SPINDLE DIAMETER AT FRONT BEARING: 180 MM
- MATERIAL PASSAGES (MAX.): 130 MM
- COLLET CHUCK DIAMETER (STANDARD): 315/400 MM
- SPEED RANGE: 2 - 1600 RPM

TAILSTOCK:
- EXTERNAL DIAMETER OF QUILL: 125 MM
- QUILL STROKE (MAX.): 200 MM
- INTERNAL TAPER: MK 6

- ORDER NUMBER: 08122971
- SERIAL NO.: 469/02
- WITH SIEMENS CONTROL SYSTEM
- MACHINE IS EQUIPPED WITH A FORKARDT THREE-JAW CHUCK, ONE TAILSTOCK AS WELL AS A CHIP CONVEYOR MAYFRAN, SERIAL NO.: P01 01M6864 01
- INCLUDED IN DELIVERY IS A BIG LOT OF MACHINE ACCESSORIES. CONSISTING OF: FOUR STEADY RESTS, SEVEN MULTIFIX HOLDERS, AS WELL AS FURTHER LATHE ACCESSORIES
- WITH COMPLETE DOCUMENTATION AS WELL AS OPERATING INSTRUCTIONS
- READ OFF OPERATING HOURS APPROX.: 6540
- IMPORTANT NOTE: THE COMPANY HDC HUTTELMAYER CONDUCTED A RETROFIT IN APRIL 2014.
- THE MACHINE HAS TO BE PICKED UP ON 13TH OR 14TH OF MAY 2019
- SEE VIDEO AS WELL AS PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-control of epl 4, with feeder fmb turbo.
turning length 600 mm
umlaufdurchm. bed 400 mm
forward screw 65 mm
speeds of 20-4000 rpm.
2 revolver with 12 tools vdi 30
approx. 29 kw
weight approx. 5.5 t
chip conveyors, chuck fabr. forkardt div tool holders, large number of collets, hydr. tailstock. CONTROL OF EPL 4, WITH FEEDER FMB TURBO. TURNING LENGTH 600 MM UMLAUFDURCHM. BED 400 MM FORWARD SCREW 65 MM SPEEDS OF 20-4000 RPM. 2 REVOLVER WITH 12 TOOLS VDI 30 APPROX. 29 KW WEIGHT APPROX. 5.5 T CHIP CONVEYORS, CHUCK FABR. FORKARDT DIV TOOL HOLDERS, LARGE NUMBER OF COLLETS, HYDR. TAILSTOCK.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-lathe, lathe, master and center lathe<br /><br />-drive length 1060 mm<br />-turning Ø over bed 530 mm<br />-turning Ø over support 270 mm<br />-screw hole Ø 62 mm<br />-spindle speeds 14-710 rpm<br />-power chuck forkardt 315 mm<br />-lünette<br />-multifix change steel holder<br />-shank mk5<br />-drive engine 7.5 kw<br />-dimensions 3020/1140 / h1250 mm<br />-weight 2615 kg LATHE, LATHE, MASTER AND CENTER LATHE

-DRIVE LENGTH 1060 MM
-TURNING Ø OVER BED 530 MM
-TURNING Ø OVER SUPPORT 270 MM
-SCREW HOLE Ø 62 MM
-SPINDLE SPEEDS 14-710 RPM
-POWER CHUCK FORKARDT 315 MM
-LüNETTE
-MULTIFIX CHANGE STEEL HOLDER
-SHANK MK5
-DRIVE ENGINE 7.5 KW
-DIMENSIONS 3020/1140 / H1250 MM
-WEIGHT 2615 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-l + z lathe hamlet can
75 - 04-03-234
shipping time: immediately

number: 04-03-234

manufacturer: weiler
type: can 75

machine data
year of construction: approx. 1985
l x w x h: approx. 2500 x 1200 x 1800 mm
weight: 1500 kg

good general condition

technical data
digital display (optional): 2 or 3 - axes - digital display (new)

dimensions:
maximum turning diameter over bed: approx. ã? 380 mm

maximum turning diameter over support: approx. ã? 190 mm

maximum turning length: approx. 1000 mm

bar passage: approx. ã? 56 mm

spindle:
speed range: approx. 13-2000 rpm

spindle nose: a 2 - 6

power: approx. 7,5 kw

automatic longitudinal & plan vorschuebe:
feed range: approximately 0.014 1.00 mm / rev

suitable for threads: - metric 0.30 mm-80 mm

"- inch 80 - 3/8 gg /"

-diametral - pitch thread 80-1 dp

-module 0.2-26

tailstock: mk 4

accessories
â?¢ 3 - bake - chuck ã? 200 mm (forkardt - wedge bar)

â?¢ quick change toolpost + 1

â?¢ coolant system

â?¢ complete machine documentation

â?¢ emergency

â?¢ electric - chuck guard

â?¢ various wrenches

â?¢ bed fence

other accessories on request
price and other specifications on request L + Z LATHE HAMLET CAN 75 - 04-03-234 SHIPPING TIME: IMMEDIATELY NUMBER: 04-03-234 MANUFACTURER: WEILER TYPE: CAN 75 MACHINE DATA YEAR OF CONSTRUCTION: APPROX. 1985 L X W X H: APPROX. 2500 X 1200 X 1800 MM WEIGHT: 1500 KG GOOD GENERAL CONDITION TECHNICAL DATA DIGITAL DISPLAY (OPTIONAL): 2 OR 3 - AXES - DIGITAL DISPLAY (NEW) DIMENSIONS: MAXIMUM TURNING DIAMETER OVER BED: APPROX. &ATILDE;? 380 MM MAXIMUM TURNING DIAMETER OVER SUPPORT: APPROX. &ATILDE;? 190 MM MAXIMUM TURNING LENGTH: APPROX. 1000 MM BAR PASSAGE: APPROX. &ATILDE;? 56 MM SPINDLE: SPEED RANGE: APPROX. 13-2000 RPM SPINDLE NOSE: A 2 - 6 POWER: APPROX. 7,5 KW AUTOMATIC LONGITUDINAL & PLAN VORSCHUEBE: FEED RANGE: APPROXIMATELY 0.014 1.00 MM / REV SUITABLE FOR THREADS: - METRIC 0.30 MM-80 MM "- INCH 80 - 3/8 GG /" -DIAMETRAL - PITCH THREAD 80-1 DP -MODULE 0.2-26 TAILSTOCK: MK 4 ACCESSORIES &ACIRC;?&CENT; 3 - BAKE - CHUCK &ATILDE;? 200 MM (FORKARDT - WEDGE BAR) &ACIRC;?&CENT; QUICK CHANGE TOOLPOST + 1 &ACIRC;?&CENT; COOLANT SYSTEM &ACIRC;?&CENT; COMPLETE MACHINE DOCUMENTATION &ACIRC;?&CENT; EMERGENCY &ACIRC;?&CENT; ELECTRIC - CHUCK GUARD &ACIRC;?&CENT; VARIOUS WRENCHES &ACIRC;?&CENT; BED FENCE OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 210 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 330 mm<br/>description: - fwb315-425, cd32-70 / 150 etc.<br> - different manufacturers such as forkardt and schunk WEIGHT APPROX.: 210 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 330 MM
DESCRIPTION: - FWB315-425, CD32-70 / 150 ETC.
- DIFFERENT MANUFACTURERS SUCH AS FORKARDT AND SCHUNK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
z310 hydraulic power chuck forkardt model kl 250 / 4m-34941
  three-jaw chuck with hydraulic cylinder both forkardt .ausgebaut from lathe of monforts.
  i have crates forkaerdtbacken if required they be sorted
  and can be supplied with 
 Z310 HYDRAULIC POWER CHUCK FORKARDT MODEL KL 250 / 4M-34941 THREE-JAW CHUCK WITH HYDRAULIC CYLINDER BOTH FORKARDT .AUSGEBAUT FROM LATHE OF MONFORTS. I HAVE CRATES FORKAERDTBACKEN IF REQUIRED THEY BE SORTED AND CAN BE SUPPLIED WITH
Vendedor: Ostertag-Plastic
Año de construcción: usado
Precio: used machinery auction RESALE 180 €
Ubicación: Land-weight approx.: 370 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 540 mm<br/>description: - fwb315 / ffa315<br> - several manufacturer, i.a. schunk and forkardt WEIGHT APPROX.: 370 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 540 MM
DESCRIPTION: - FWB315 / FFA315
- SEVERAL MANUFACTURER, I.A. SCHUNK AND FORKARDT
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land--digital display - forkardt f630 wedge bar chucks lünettespitzenhöhe610mmspitzenweite7000mmdrehdurchmesser about support850mmdrehdurchmesser about bett1220mmdrehdurchmesser about aussparung1550mmbettbreite850mmbettbreite on the basis1050mmgewicht between peaks without lünette12000kggewicht between top with lünette15000kgmax. weight fliegend300 mm in front of the planscheibe3000kgdrehzahl3 - 630u/minspindelbohrung112mmeilgang bettschlitten3000mm/min. rapid traverse of the querschlitten1500mm/min. dimension (l x w x h) 11000 x 1800 x 2000mmgewicht approx. 18000kg   -DIGITAL DISPLAY - FORKARDT F630 WEDGE BAR CHUCKS LüNETTESPITZENHöHE610MMSPITZENWEITE7000MMDREHDURCHMESSER ABOUT SUPPORT850MMDREHDURCHMESSER ABOUT BETT1220MMDREHDURCHMESSER ABOUT AUSSPARUNG1550MMBETTBREITE850MMBETTBREITE ON THE BASIS1050MMGEWICHT BETWEEN PEAKS WITHOUT LüNETTE12000KGGEWICHT BETWEEN TOP WITH LüNETTE15000KGMAX. WEIGHT FLIEGEND300 MM IN FRONT OF THE PLANSCHEIBE3000KGDREHZAHL3 - 630U/MINSPINDELBOHRUNG112MMEILGANG BETTSCHLITTEN3000MM/MIN. RAPID TRAVERSE OF THE QUERSCHLITTEN1500MM/MIN. DIMENSION (L X W X H) 11000 X 1800 X 2000MMGEWICHT APPROX. 18000KG
Vendedor: Catalano Werkzeugmaschinen AG
Año de construcción: usado
Precio: used machinery auction RESALE 130 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 1200 x 800 x 330 mm<br/>description: - 315-80 / 315-40 WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 1200 X 800 X 330 MM
DESCRIPTION: - 315-80 / 315-40
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-dividing with forkardt f250 DIVIDING WITH FORKARDT F250
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 750 x 720 x 1100 mm<br/>description: - content of three jaw chuck forkardt, several tips, multifix holders, lathe tools, jaws and steady rest WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 720 X 1100 MM
DESCRIPTION: - CONTENT OF THREE JAW CHUCK FORKARDT, SEVERAL TIPS, MULTIFIX HOLDERS, LATHE TOOLS, JAWS AND STEADY REST
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-diameter 250 x 60 mm DIAMETER 250 X 60 MM
Vendedor: rinke + Partner GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 10000 kg<br/>dimensions (l x w x h) approx.: 4600 x 2100 x 1900 mm<br/>description: - swing diameter over bed: 710 mm<br> - swing diameter over face slide: 415 mm<br> - chuck forkardt 400<br> - distance between centres: 2000 mm<br> - drive power: 22 kw<br> - speed range: 16-1800 rpm<br> - many accessories: two steady rests, one pallet of multifix steel holders, clamping jaws WEIGHT APPROX.: 10000 KG
DIMENSIONS (L X W X H) APPROX.: 4600 X 2100 X 1900 MM
DESCRIPTION: - SWING DIAMETER OVER BED: 710 MM
- SWING DIAMETER OVER FACE SLIDE: 415 MM
- CHUCK FORKARDT 400
- DISTANCE BETWEEN CENTRES: 2000 MM
- DRIVE POWER: 22 KW
- SPEED RANGE: 16-1800 RPM
- MANY ACCESSORIES: TWO STEADY RESTS, ONE PALLET OF MULTIFIX STEEL HOLDERS, CLAMPING JAWS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-1 piece of overbeck\'s interior and surface grinding machine<br/>  model: 400 i ha<br/>  year of construction: 1979 / reconditioned in 1997<br/>  schleifbarer bore diameter 120 mm<br/>  grinding hole length 45 mm<br/>  work piece clamping length 45 mm<br/>  workpiece diameter max.            160 mm<br/>  <br/>  with three-jaw chucks 200 mm (forkardt),.<br/>  coolant tank with pump,<br/>  plan grinding device, side 1 PIECE OF OVERBECK\'S INTERIOR AND SURFACE GRINDING MACHINE
MODEL: 400 I HA
YEAR OF CONSTRUCTION: 1979 / RECONDITIONED IN 1997
SCHLEIFBARER BORE DIAMETER 120 MM
GRINDING HOLE LENGTH 45 MM
WORK PIECE CLAMPING LENGTH 45 MM
WORKPIECE DIAMETER MAX. 160 MM

WITH THREE-JAW CHUCKS 200 MM (FORKARDT),.
COOLANT TANK WITH PUMP,
PLAN GRINDING DEVICE, SIDE
Vendedor: Bernd Gail GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 100 €
Ubicación: Land-weight approx.: 50 kg<br/>dimensions (l x w x h) approx.: 640 x 340 x 340 mm<br/>description: - 1 x rÖhm 4-jaw chuck, diameter: 250 mm<br> - 1 x forkardt 3-jaw chuck, diameter: 250 mm WEIGHT APPROX.: 50 KG
DIMENSIONS (L X W X H) APPROX.: 640 X 340 X 340 MM
DESCRIPTION: - 1 X RÖHM 4-JAW CHUCK, DIAMETER: 250 MM
- 1 X FORKARDT 3-JAW CHUCK, DIAMETER: 250 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-white goliath gsa high performance lathe with automatic thread cutting system<br/>  <br/>  built in 1982<br/>  maximum swing over bed 450 mm<br/>  over bed slide 240 mm<br/>  top width 2000 mm<br/>  spindle speed 7.1-1400 rpm<br/>  spindle nose gr. 8<br/>  spindle bore 70 mm<br/>  main drive 15 kw<br/>  forkardt rotary feed 250 mm<br/>  quill way 250 mm<br/>  weight approx. 5000 kg<br/>  <br/>  accessories: thread cutting automatic, digital display, coolant system, multi fix toolpost, feed in the upper support, lynette, centre point... WHITE GOLIATH GSA HIGH PERFORMANCE LATHE WITH AUTOMATIC THREAD CUTTING SYSTEM

BUILT IN 1982
MAXIMUM SWING OVER BED 450 MM
OVER BED SLIDE 240 MM
TOP WIDTH 2000 MM
SPINDLE SPEED 7.1-1400 RPM
SPINDLE NOSE GR. 8
SPINDLE BORE 70 MM
MAIN DRIVE 15 KW
FORKARDT ROTARY FEED 250 MM
QUILL WAY 250 MM
WEIGHT APPROX. 5000 KG

ACCESSORIES: THREAD CUTTING AUTOMATIC, DIGITAL DISPLAY, COOLANT SYSTEM, MULTI FIX TOOLPOST, FEED IN THE UPPER SUPPORT, LYNETTE, CENTRE POINT...
Vendedor: Zölch GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 34.000 €
Ubicación: Land-weight approx.: 18500 kg<br/>dimensions (l x w x h) approx.: 8000 x 4000 x 3200 mm<br/>description: cnc control siemens 840 d<br> technical data<br> max. turning diameter 610 mm<br> max. turning length 1850 mm<br> travel y-axis (slide 1) 210 mm<br> travel b-axis (slide 1) 240 mm<br> cross path (slide 1/slide 2) 605/267 mm<br> longitudinal path (slide 1/slide 2) 1470/1440 mm<br> longitudinal path (slide 3) 1490 mm<br> spindle bore 118 mm<br> tool spindle speed 4000 1/min<br> speed range stepless 20 - 3.200 rpm.<br> torque at the spindle 650/1080 nm<br> speed range c-axis 3200 rpm<br> rapid traverse (slide 1) 46/24 n/min.<br> rapid traverse (slide 2) 24/60 m/min<br> total power requirement 130/180 kw<br> weight approx. 18.5 t<br> space requirement lt aw card (lx wx h) 8000 x 4000 x 3200 mm<br> <br> equipment<br> main and counter spindle as integrated spindle motor<br> differential clamping pressure for main and counter spindle<br> drive power each 69 kw (56 - 40% duty cycle)<br> separate speed limitation unit for power chuck<br> tool magazine 40-fold (permitted expansion of tool magazine by a second chain with further 40 places)<br> three-jaw power chuck with bore and jaw quick-changing system fnc 250-72  forkardt, incl. attachment parts for main spindle<br> holder for counter spindle<br> spindle flange with mks (holder and revolving tailstock center<br> in-process probe marposs<br> blower air controllable alternative to the coolant<br> double clamping cylinder<br> the adjustable setting force of the counter spindle for the tailstock operation is made with the programming function 11 traversing to a fixed stop<br> measuring cycles: there is the possibility of measuring with probes at the c-axis.<br> the 5-axis-simultaneous movement programs the axes: x, y, z, c and b.<br> 4-path bed - roller guides<br> kuehlmittelspritzpistole<br> compact filter system lnterlit<br> additional coolant pump 80 bar, for upper tool carrier<br> chip conveyor<br> ethernet interface<br> WEIGHT APPROX.: 18500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 4000 X 3200 MM
DESCRIPTION: CNC CONTROL SIEMENS 840 D
TECHNICAL DATA
MAX. TURNING DIAMETER 610 MM
MAX. TURNING LENGTH 1850 MM
TRAVEL Y-AXIS (SLIDE 1) 210 MM
TRAVEL B-AXIS (SLIDE 1) 240 MM
CROSS PATH (SLIDE 1/SLIDE 2) 605/267 MM
LONGITUDINAL PATH (SLIDE 1/SLIDE 2) 1470/1440 MM
LONGITUDINAL PATH (SLIDE 3) 1490 MM
SPINDLE BORE 118 MM
TOOL SPINDLE SPEED 4000 1/MIN
SPEED RANGE STEPLESS 20 - 3.200 RPM.
TORQUE AT THE SPINDLE 650/1080 NM
SPEED RANGE C-AXIS 3200 RPM
RAPID TRAVERSE (SLIDE 1) 46/24 N/MIN.
RAPID TRAVERSE (SLIDE 2) 24/60 M/MIN
TOTAL POWER REQUIREMENT 130/180 KW
WEIGHT APPROX. 18.5 T
SPACE REQUIREMENT LT AW CARD (LX WX H) 8000 X 4000 X 3200 MM

EQUIPMENT
MAIN AND COUNTER SPINDLE AS INTEGRATED SPINDLE MOTOR
DIFFERENTIAL CLAMPING PRESSURE FOR MAIN AND COUNTER SPINDLE
DRIVE POWER EACH 69 KW (56 - 40% DUTY CYCLE)
SEPARATE SPEED LIMITATION UNIT FOR POWER CHUCK
TOOL MAGAZINE 40-FOLD (PERMITTED EXPANSION OF TOOL MAGAZINE BY A SECOND CHAIN WITH FURTHER 40 PLACES)
THREE-JAW POWER CHUCK WITH BORE AND JAW QUICK-CHANGING SYSTEM FNC 250-72 FORKARDT, INCL. ATTACHMENT PARTS FOR MAIN SPINDLE
HOLDER FOR COUNTER SPINDLE
SPINDLE FLANGE WITH MKS (HOLDER AND REVOLVING TAILSTOCK CENTER
IN-PROCESS PROBE MARPOSS
BLOWER AIR CONTROLLABLE ALTERNATIVE TO THE COOLANT
DOUBLE CLAMPING CYLINDER
THE ADJUSTABLE SETTING FORCE OF THE COUNTER SPINDLE FOR THE TAILSTOCK OPERATION IS MADE WITH THE PROGRAMMING FUNCTION 11 TRAVERSING TO A FIXED STOP
MEASURING CYCLES: THERE IS THE POSSIBILITY OF MEASURING WITH PROBES AT THE C-AXIS.
THE 5-AXIS-SIMULTANEOUS MOVEMENT PROGRAMS THE AXES: X, Y, Z, C AND B.
4-PATH BED - ROLLER GUIDES
KUEHLMITTELSPRITZPISTOLE
COMPACT FILTER SYSTEM LNTERLIT
ADDITIONAL COOLANT PUMP 80 BAR, FOR UPPER TOOL CARRIER
CHIP CONVEYOR
ETHERNET INTERFACE
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.300 €
Ubicación: Land-control: okuma osp 5000 l-g<br/>  schwing - ø over cross slide 480 mm<br/>  max turning - ø 360 mm<br/>  maximum turning length 1200 mm<br/>  spindle bore - ø 80 mm<br/>  spindle speed 65-3,500 rpm (stepless)<br/>  sledge 670 mm z-axis längsverfahrweg<br/>  cross slide cross slide travel x-axis 185 mm + 45 mm<br/>  turret with 12 tool stations<br/>  hydraulic tailstock with a quill ø 100 mm quill stroke 120 mm<br/>  main spindle motor 15/11 ac<br/>  <br/>  accessories:<br/>  coolant system 105 l<br/>  hydraulic tailstock<br/>  3 bake power forkardt chucks<br/>  <br/>  machine has been already repainted. CONTROL: OKUMA OSP 5000 L-G
SCHWING - ø OVER CROSS SLIDE 480 MM
MAX TURNING - ø 360 MM
MAXIMUM TURNING LENGTH 1200 MM
SPINDLE BORE - ø 80 MM
SPINDLE SPEED 65-3,500 RPM (STEPLESS)
SLEDGE 670 MM Z-AXIS LäNGSVERFAHRWEG
CROSS SLIDE CROSS SLIDE TRAVEL X-AXIS 185 MM + 45 MM
TURRET WITH 12 TOOL STATIONS
HYDRAULIC TAILSTOCK WITH A QUILL ø 100 MM QUILL STROKE 120 MM
MAIN SPINDLE MOTOR 15/11 AC

ACCESSORIES:
COOLANT SYSTEM 105 L
HYDRAULIC TAILSTOCK
3 BAKE POWER FORKARDT CHUCKS

MACHINE HAS BEEN ALREADY REPAINTED.
Vendedor: KW Maschinen GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: max. 570 mm<br/>turning length: 2000 mm<br/>control: sinumerik 805  siemens<br/>greates pass round over bed: 570 mm<br/>swing diameter over face slide: 365 mm<br/>standard turning dia.: 345 mm<br/>main spindle::  <br/>turning speed range - main spindle: 3 - 2.500 min/-1<br/>no. of turning speeds: 2 <br/>power capacity - main spindel: 19/15 kw<br/>max. torque: 1800/1400 nm<br/>spindle diameter in front bearing: 100 mm<br/>spindle bore: 62 mm<br/>spindle head: din 55027 no. 8<br/>axis stroke::  <br/>radial face slide travel: 345 mm<br/>travel upper slide: 125 mm<br/>tailstock::  <br/>diameter of quill: 80 mm<br/>taper of center: mk 5 <br/>quill stroke: 190 mm<br/>feeds::  <br/>speed longitudinal: max. 10 m/min<br/>face feeds: max. 5 m/min<br/>threading cutting device::  <br/>thread pitch: 0,1 - 400 mm<br/>total power requirement: 58 a<br/>weight of the machine ca.: 5,0 t<br/>dimensions of the machine ca.: 4,1x 2,0 x 1,9 m<br/>documents:  <br/>coolantsystem:  <br/>tailstock:  <br/>multifix holder:  <br/>power on = 4915 h.<br/>spindeltime = 1820 h.<br/><br/>incl. working lamp<br/>incl. multifix- system incl. one holder<br/>incl. 3-jaw forkardt 315<br/>incl. coolantpump<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 570 MM
TURNING LENGTH: 2000 MM
CONTROL: SINUMERIK 805 SIEMENS
GREATES PASS ROUND OVER BED: 570 MM
SWING DIAMETER OVER FACE SLIDE: 365 MM
STANDARD TURNING DIA.: 345 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: 3 - 2.500 MIN/-1
NO. OF TURNING SPEEDS: 2
POWER CAPACITY - MAIN SPINDEL: 19/15 KW
MAX. TORQUE: 1800/1400 NM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
SPINDLE BORE: 62 MM
SPINDLE HEAD: DIN 55027 NO. 8
AXIS STROKE::
RADIAL FACE SLIDE TRAVEL: 345 MM
TRAVEL UPPER SLIDE: 125 MM
TAILSTOCK::
DIAMETER OF QUILL: 80 MM
TAPER OF CENTER: MK 5
QUILL STROKE: 190 MM
FEEDS::
SPEED LONGITUDINAL: MAX. 10 M/MIN
FACE FEEDS: MAX. 5 M/MIN
THREADING CUTTING DEVICE::
THREAD PITCH: 0,1 - 400 MM
TOTAL POWER REQUIREMENT: 58 A
WEIGHT OF THE MACHINE CA.: 5,0 T
DIMENSIONS OF THE MACHINE CA.: 4,1X 2,0 X 1,9 M
DOCUMENTS:
COOLANTSYSTEM:
TAILSTOCK:
MULTIFIX HOLDER:
POWER ON = 4915 H.
SPINDELTIME = 1820 H.

INCL. WORKING LAMP
INCL. MULTIFIX- SYSTEM INCL. ONE HOLDER
INCL. 3-JAW FORKARDT 315
INCL. COOLANTPUMP




Vendedor: SKM Industriemaschinen
Año de construcción: usado
Ubicación: Land-3 piece clamping jaws for forkardt f 500 l<br/>  <br/>  the restart jaws are soft jaws (without guarantee.) 3 PIECE CLAMPING JAWS FOR FORKARDT F 500 L

THE RESTART JAWS ARE SOFT JAWS (WITHOUT GUARANTEE.)
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-turning diameter over bed: 480 mm<br/>turning diameter over slide rest: 355 mm<br/>turning length: 2000 mm<br/>centre height: 240 mm<br/>bed width: 375 mm<br/>spindle passage: 52 mm<br/>speeds: 24: 11,2 - 1120 u/min<br/>drive: 4 kw<br/>quill taper in tailstock: mk 4 <br/>feed longitudinal: 0,025 - 5,6 mm/u<br/>feeds cross: 0,01 - 2,23 mm/u<br/>weight of the machine ca.: 2,2 t<br/>dimensions of the machine ca.: 3,5 x 1,1 x 1,35 m<br/>electric 380 volt:  <br/>cooling equipment:  <br/>fixed and revolving steady: durchgang 150 mm<br/>power traverse in the top carriage:  <br/>3 jaw chuck: forkardt 250 mm<br/>faceplate: 450 mm<br/>rapid transfer-steel holder with applications:  <br/>german quality product, the machine is in good condition.<br/>machine dealer with own stock of 2500 m².<br/><br/><br/><br/><br/><br/> TURNING DIAMETER OVER BED: 480 MM
TURNING DIAMETER OVER SLIDE REST: 355 MM
TURNING LENGTH: 2000 MM
CENTRE HEIGHT: 240 MM
BED WIDTH: 375 MM
SPINDLE PASSAGE: 52 MM
SPEEDS: 24: 11,2 - 1120 U/MIN
DRIVE: 4 KW
QUILL TAPER IN TAILSTOCK: MK 4
FEED LONGITUDINAL: 0,025 - 5,6 MM/U
FEEDS CROSS: 0,01 - 2,23 MM/U
WEIGHT OF THE MACHINE CA.: 2,2 T
DIMENSIONS OF THE MACHINE CA.: 3,5 X 1,1 X 1,35 M
ELECTRIC 380 VOLT:
COOLING EQUIPMENT:
FIXED AND REVOLVING STEADY: DURCHGANG 150 MM
POWER TRAVERSE IN THE TOP CARRIAGE:
3 JAW CHUCK: FORKARDT 250 MM
FACEPLATE: 450 MM
RAPID TRANSFER-STEEL HOLDER WITH APPLICATIONS:
GERMAN QUALITY PRODUCT, THE MACHINE IS IN GOOD CONDITION.
MACHINE DEALER WITH OWN STOCK OF 2500 M².





Vendedor: Plum & Partner Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-make: mori seiki
model: sl 45
year: 1992
condition: used
machine type: lathe 
location of machine: uk

machine details
make

mori seiki

model

sl-45m

year

1992

control

fanuc ot-c

chuck

400mm

swing

670mm

between centres

1200mm

spindle speed

2,500 rpm

turret

12 stations

tailstock

not included

plus

milling function

c-axis

15in forkardt quick change chuck  MAKE: MORI SEIKI MODEL: SL 45 YEAR: 1992 CONDITION: USED MACHINE TYPE: LATHE LOCATION OF MACHINE: UK MACHINE DETAILS MAKE MORI SEIKI MODEL SL-45M YEAR 1992 CONTROL FANUC OT-C CHUCK 400MM SWING 670MM BETWEEN CENTRES 1200MM SPINDLE SPEED 2,500 RPM TURRET 12 STATIONS TAILSTOCK NOT INCLUDED PLUS MILLING FUNCTION C-AXIS 15IN FORKARDT QUICK CHANGE CHUCK
Vendedor: CNC Management Ltd
Año de construcción: usado
Ubicación: Land-diameter: 400 mm<br/>height: 167 mm<br/>hollow: 100 mm<br/>weight of the machine ca.: 0,2 t<br/>dimensions of the machine ca.: 0,4 x 0,4 x 0,35 m<br/><br/><br/><br/><br/> DIAMETER: 400 MM
HEIGHT: 167 MM
HOLLOW: 100 MM
WEIGHT OF THE MACHINE CA.: 0,2 T
DIMENSIONS OF THE MACHINE CA.: 0,4 X 0,4 X 0,35 M




Vendedor: WMT GmbH & Co. KG
Año de construcción: usado
Precio: 5.000 €
Ubicación: Land-built in 1990<br/>  uddin überbettschlitten 540 mm<br/>  circulation over cross slide 450 mm<br/>  maximum turning length 1000 mm<br/>  maximum workpiece weight 1250 g<br/>  spindle bore 77 mm<br/>  2 revolver<br/>  forkardt feed 315 mm, size 8<br/>  connection value 65 kva<br/>  weight 8000 kg<br/>  <br/>  chip conveyor<br/>  <br/>  the machine comes from an operating sau rafts. a besichtigunmg power is not possible, because the machine at a forwarding agent is stored. BUILT IN 1990
UDDIN üBERBETTSCHLITTEN 540 MM
CIRCULATION OVER CROSS SLIDE 450 MM
MAXIMUM TURNING LENGTH 1000 MM
MAXIMUM WORKPIECE WEIGHT 1250 G
SPINDLE BORE 77 MM
2 REVOLVER
FORKARDT FEED 315 MM, SIZE 8
CONNECTION VALUE 65 KVA
WEIGHT 8000 KG

CHIP CONVEYOR

THE MACHINE COMES FROM AN OPERATING SAU RAFTS. A BESICHTIGUNMG POWER IS NOT POSSIBLE, BECAUSE THE MACHINE AT A FORWARDING AGENT IS STORED.
Vendedor: Zölch GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-turning diameter:425 mm<br/>turning length:1000 mm<br/>control: <br/>swing diameter max. over bed cover:590 mm<br/>swing diameter over face slide:425 mm<br/>turning speeds:40 - 4.000 1/min<br/>spindle hollow:86 mm<br/>spindle:30,5 / 21,5 kw<br/>turret head:12 vdi 40 pos.<br/>turret head drive:13,6 (25%ed) kw<br/>rapid power traverse in x-and z direction:12 / 15 m/min<br/>rotational speed range of tools:4500 1/min<br/>speed range c-axis:0-25 1/min<br/>tailstock quill taper mt:4 <br/>tailstock adjustment:1200 mm<br/>quill stroke:105 mm<br/>total power requirement:41 kva<br/>weight of the machine ca.:8,5 t<br/>dimensions of the machine ca.: m<br/><br/>cnc-lathe, turret head with 12 driven tools,   c-axis tailstock (automatic),  tooleye, hollow clamping device, second (programable or manually) clamping force for chuck, el.handwheel, additional memory up to 1gb, auto turn, cycle for turning/drilling/milling, ethernet, reinforced coolant device 20bar, chipconveyor, filter for coolant, suction, accessories (5 pcs. live tools), 3-jaw chuck forkardt 315mm TURNING DIAMETER:425 MM
TURNING LENGTH:1000 MM
CONTROL:
SWING DIAMETER MAX. OVER BED COVER:590 MM
SWING DIAMETER OVER FACE SLIDE:425 MM
TURNING SPEEDS:40 - 4.000 1/MIN
SPINDLE HOLLOW:86 MM
SPINDLE:30,5 / 21,5 KW
TURRET HEAD:12 VDI 40 POS.
TURRET HEAD DRIVE:13,6 (25%ED) KW
RAPID POWER TRAVERSE IN X-AND Z DIRECTION:12 / 15 M/MIN
ROTATIONAL SPEED RANGE OF TOOLS:4500 1/MIN
SPEED RANGE C-AXIS:0-25 1/MIN
TAILSTOCK QUILL TAPER MT:4
TAILSTOCK ADJUSTMENT:1200 MM
QUILL STROKE:105 MM
TOTAL POWER REQUIREMENT:41 KVA
WEIGHT OF THE MACHINE CA.:8,5 T
DIMENSIONS OF THE MACHINE CA.: M

CNC-LATHE, TURRET HEAD WITH 12 DRIVEN TOOLS, C-AXIS TAILSTOCK (AUTOMATIC), TOOLEYE, HOLLOW CLAMPING DEVICE, SECOND (PROGRAMABLE OR MANUALLY) CLAMPING FORCE FOR CHUCK, EL.HANDWHEEL, ADDITIONAL MEMORY UP TO 1GB, AUTO TURN, CYCLE FOR TURNING/DRILLING/MILLING, ETHERNET, REINFORCED COOLANT DEVICE 20BAR, CHIPCONVEYOR, FILTER FOR COOLANT, SUCTION, ACCESSORIES (5 PCS. LIVE TOOLS), 3-JAW CHUCK FORKARDT 315MM
Vendedor: S+B Maschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-de Germany, 58256 Ennepetal
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-internal diameter: 40 - 400 mm<br/>grinding depth: 315 mm<br/>swing diameter: 500 mm<br/>internal grinding motor: 7,5 kw<br/>face grinding motor: 4 kw<br/>workpiece motor: 0,9/1,5 kw<br/>work piece spindle speed: 40 - 400 u/min<br/>table speeds: 0,1 - 8 m/min<br/>rapid traverse of table: 10 m/min<br/>total power requirement: 17 kw<br/>weight of the machine ca.: 5,8 t<br/>dimensions of the machine ca.: 3500 x 2400 x 2000 mm<br/>equipped with:<br/>face grinding attachment<br/>3-jaw chuck forkardt f 400<br/>dresser<br/>internal grinding spindle with several grinding arbors and grinding wheels<br/>documentation<br/><br/><br/><br/><br/> INTERNAL DIAMETER: 40 - 400 MM
GRINDING DEPTH: 315 MM
SWING DIAMETER: 500 MM
INTERNAL GRINDING MOTOR: 7,5 KW
FACE GRINDING MOTOR: 4 KW
WORKPIECE MOTOR: 0,9/1,5 KW
WORK PIECE SPINDLE SPEED: 40 - 400 U/MIN
TABLE SPEEDS: 0,1 - 8 M/MIN
RAPID TRAVERSE OF TABLE: 10 M/MIN
TOTAL POWER REQUIREMENT: 17 KW
WEIGHT OF THE MACHINE CA.: 5,8 T
DIMENSIONS OF THE MACHINE CA.: 3500 X 2400 X 2000 MM
EQUIPPED WITH:
FACE GRINDING ATTACHMENT
3-JAW CHUCK FORKARDT F 400
DRESSER
INTERNAL GRINDING SPINDLE WITH SEVERAL GRINDING ARBORS AND GRINDING WHEELS
DOCUMENTATION




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-; good ; GOOD
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: 650 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-de Germany, 58256 Ennepetal
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
producer: saeed
model: you 500 machines no.: 15104
construction year: ca. 1955 weight: 3000 kg
general information / technical data:
pre-owned lathes made in germany with original multifix tool holder control and spindle system in good condition.
speed: 24 pcs-9, 11, 14, 18, 22, 28, 36, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900, 1120, 1400, 1800u/min
feed: 2 x 96 piece of mechanical transmission and change gears, with thread cutting function of transmission for metric and whitworth -, thread
tip height: 275 mm (160 mm above support) measured values
centre distance: 1750 mm (max. approx. 1500 mm between feed face and quill tailstock)
spindle passage: 60 mm dimensions machine: (w x d x h) 3400 mm x 1650 mm x 1500 mm
power supply/control voltage: 500volt 50 hz / 220v

optional accessories:
&bull; original multifix tool carrier system type "c" with 3 piece tool holders
&bull; 2 piece fixed steady rest different ã? (closed)
&bull; 1 piece 3 jaw power chuck chuck make forkardt ã?250mmmit feed key
&bull; 1 piece faceplate ã? 500 mm
&bull; coolant system
&bull; machine documentation
&bull; various fixed centres and lathe tools
comments:
the machine is with us in the camp under power and ready on the demonstration. the machine funktioniertmit a minor performance loss (approximately 20%) on the 400volt network. the machine has a preparation for a hydraulic copying device, the copy slide is missing!
 PRODUCER: SAEED MODEL: YOU 500 MACHINES NO.: 15104 CONSTRUCTION YEAR: CA. 1955 WEIGHT: 3000 KG GENERAL INFORMATION / TECHNICAL DATA: PRE-OWNED LATHES MADE IN GERMANY WITH ORIGINAL MULTIFIX TOOL HOLDER CONTROL AND SPINDLE SYSTEM IN GOOD CONDITION. SPEED: 24 PCS-9, 11, 14, 18, 22, 28, 36, 45, 56, 71, 90, 112, 140, 180, 224, 280, 355, 450, 560, 710, 900, 1120, 1400, 1800U/MIN FEED: 2 X 96 PIECE OF MECHANICAL TRANSMISSION AND CHANGE GEARS, WITH THREAD CUTTING FUNCTION OF TRANSMISSION FOR METRIC AND WHITWORTH -, THREAD TIP HEIGHT: 275 MM (160 MM ABOVE SUPPORT) MEASURED VALUES CENTRE DISTANCE: 1750 MM (MAX. APPROX. 1500 MM BETWEEN FEED FACE AND QUILL TAILSTOCK) SPINDLE PASSAGE: 60 MM DIMENSIONS MACHINE: (W X D X H) 3400 MM X 1650 MM X 1500 MM POWER SUPPLY/CONTROL VOLTAGE: 500VOLT 50 HZ / 220V OPTIONAL ACCESSORIES: &BULL; ORIGINAL MULTIFIX TOOL CARRIER SYSTEM TYPE "C" WITH 3 PIECE TOOL HOLDERS &BULL; 2 PIECE FIXED STEADY REST DIFFERENT &ATILDE;? (CLOSED) &BULL; 1 PIECE 3 JAW POWER CHUCK CHUCK MAKE FORKARDT &ATILDE;?250MMMIT FEED KEY &BULL; 1 PIECE FACEPLATE &ATILDE;? 500 MM &BULL; COOLANT SYSTEM &BULL; MACHINE DOCUMENTATION &BULL; VARIOUS FIXED CENTRES AND LATHE TOOLS COMMENTS: THE MACHINE IS WITH US IN THE CAMP UNDER POWER AND READY ON THE DEMONSTRATION. THE MACHINE FUNKTIONIERTMIT A MINOR PERFORMANCE LOSS (APPROXIMATELY 20%) ON THE 400VOLT NETWORK. THE MACHINE HAS A PREPARATION FOR A HYDRAULIC COPYING DEVICE, THE COPY SLIDE IS MISSING!
Vendedor: Wiemers AG
Año de construcción: usado
Precio: 540 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-year built: approx 1973spitzenhoehe: 190 mmdrehlaenge: 1000 mmdrehzahlbereich: 30-1500 upmspindeldurchlass: 38 mmgesamtleistungsbedarf: approx. 2.5 kw / 380 voltmaschinengewicht: 1,200 kgausstattung / accessories: 3 jaw chuck forkardt 200 mmmultifix quick change toolpost mod. ed 2512 incl. 3 taschenschnellspannbohrfuttermitlfd. koernerspitzediv. kleinteilealle created technical data after best knowledge and existing documents; expressly reserved by mistake. each party has the opportunity to test the machine before making a purchase after consultation under power.  YEAR BUILT: APPROX 1973SPITZENHOEHE: 190 MMDREHLAENGE: 1000 MMDREHZAHLBEREICH: 30-1500 UPMSPINDELDURCHLASS: 38 MMGESAMTLEISTUNGSBEDARF: APPROX. 2.5 KW / 380 VOLTMASCHINENGEWICHT: 1,200 KGAUSSTATTUNG / ACCESSORIES: 3 JAW CHUCK FORKARDT 200 MMMULTIFIX QUICK CHANGE TOOLPOST MOD. ED 2512 INCL. 3 TASCHENSCHNELLSPANNBOHRFUTTERMITLFD. KOERNERSPITZEDIV. KLEINTEILEALLE CREATED TECHNICAL DATA AFTER BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE MAKING A PURCHASE AFTER CONSULTATION UNDER POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FORKARDT types: