144 ofertas

Año de construcción: usado
Ubicación: Land-it is a used, reconditioned fortuna bun press gr. 4 (semiautomatic, 30-teilig) for sale. the sandwich press is fully functional in top condition, and runs very quietly. a new star of blade made of stainless steel was installed, no visible wear. the motor has been stored new and built a new main switch. the machine has been repainted. the weight of the machine is 40gr. -110 gr. each piece of dough (30-teilig). dough deposit: 1200gr. -3300gr. dough should be just pressed and cut a higher weight range is possible. incl. 3 x effect plates (active panels more upon request).
height: 1350mm, width: 580mm, depth: 580mm, weight: 330kg
power: approx. 0,74 kw
a video can be sent on request.

price on request.  IT IS A USED, RECONDITIONED FORTUNA BUN PRESS GR. 4 (SEMIAUTOMATIC, 30-TEILIG) FOR SALE. THE SANDWICH PRESS IS FULLY FUNCTIONAL IN TOP CONDITION, AND RUNS VERY QUIETLY. A NEW STAR OF BLADE MADE OF STAINLESS STEEL WAS INSTALLED, NO VISIBLE WEAR. THE MOTOR HAS BEEN STORED NEW AND BUILT A NEW MAIN SWITCH. THE MACHINE HAS BEEN REPAINTED. THE WEIGHT OF THE MACHINE IS 40GR. -110 GR. EACH PIECE OF DOUGH (30-TEILIG). DOUGH DEPOSIT: 1200GR. -3300GR. DOUGH SHOULD BE JUST PRESSED AND CUT A HIGHER WEIGHT RANGE IS POSSIBLE. INCL. 3 X EFFECT PLATES (ACTIVE PANELS MORE UPON REQUEST). HEIGHT: 1350MM, WIDTH: 580MM, DEPTH: 580MM, WEIGHT: 330KG POWER: APPROX. 0,74 KW A VIDEO CAN BE SENT ON REQUEST. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nhead turning backwards by a motor\r\ninclude 3 new rounding plates TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NHEAD TURNING BACKWARDS BY A MOTOR\R\NINCLUDE 3 NEW ROUNDING PLATES
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-it is a used fortuna head machine km 4 rows for sale. the machine is in state of the bakery, not cleaned.
to overtake or for parts.

price on request.  IT IS A USED FORTUNA HEAD MACHINE KM 4 ROWS FOR SALE. THE MACHINE IS IN STATE OF THE BAKERY, NOT CLEANED. TO OVERTAKE OR FOR PARTS. PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Ubicación: Land-v _ cutter alpina pbv 330 20 dc with water metering, continuously and program automatic complete stainless steel
loading
ejector
year 1998 interior is the frame also made of stainless steel vacuum pump is unfortunately not...
 V _ CUTTER ALPINA PBV 330 20 DC WITH WATER METERING, CONTINUOUSLY AND PROGRAM AUTOMATIC COMPLETE STAINLESS STEEL LOADING EJECTOR YEAR 1998 INTERIOR IS THE FRAME ALSO MADE OF STAINLESS STEEL VACUUM PUMP IS UNFORTUNATELY NOT...
Vendedor: HFM Fleischereimaschinen
Año de construcción: usado
Ubicación: Land-type automat, 30 pcs.,  32  -  70 g\r\nmanually head turning backwards\r\n TYPE AUTOMAT, 30 PCS., 32 - 70 G\R\NMANUALLY HEAD TURNING BACKWARDS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-description:
3 - jaw chuck forkardt 315 mm
quick change toolpost multifix
rapid traverse
unfortunately no chip tray
coolant reservoir

technical data

tip height 300 mm
top width 2000 mm
spindle bore 108 mm
spindle speeds 31.5-1400 u. / min.
feeds along 0.08 1.06 mm / rev.	
feed plan 0.037 - 0.53 mm / rev. DESCRIPTION: 3 - JAW CHUCK FORKARDT 315 MM QUICK CHANGE TOOLPOST MULTIFIX RAPID TRAVERSE UNFORTUNATELY NO CHIP TRAY COOLANT RESERVOIR TECHNICAL DATA TIP HEIGHT 300 MM TOP WIDTH 2000 MM SPINDLE BORE 108 MM SPINDLE SPEEDS 31.5-1400 U. / MIN. FEEDS ALONG 0.08 1.06 MM / REV. FEED PLAN 0.037 - 0.53 MM / REV.
Vendedor: Oeben Werkzeugmaschinen
Año de construcción: usado
Precio: used machinery auction RESALE 20 €
Ubicación: Land-weight approx.: 40 kg<br/>dimensions (l x w x h) approx.: 500 x 500 x 300 mm<br/>description: - 610 x 203,2 WEIGHT APPROX.: 40 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 500 X 300 MM
DESCRIPTION: - 610 X 203,2
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 415 €
Ubicación: Land-linde

lagw 365 e

welding machine tig welding machine

technical data:
 
linde lagw 365 e

schweisstrom max 360 a

incl. cable, pressure reducer

tig hose package

weight weighed 435 kg

performance data please take the nameplate

the plant is native to a closure, power connector plug is a 63a, therefore we can not test unfortunately the welding machine, but has been used according to previous owner until closure.

we sell the item as defective, or carrier of part of.

a vat invoice is created for you.

LINDE LAGW 365 E WELDING MACHINE TIG WELDING MACHINE TECHNICAL DATA: LINDE LAGW 365 E SCHWEISSTROM MAX 360 A INCL. CABLE, PRESSURE REDUCER TIG HOSE PACKAGE WEIGHT WEIGHED 435 KG PERFORMANCE DATA PLEASE TAKE THE NAMEPLATE THE PLANT IS NATIVE TO A CLOSURE, POWER CONNECTOR PLUG IS A 63A, THEREFORE WE CAN NOT TEST UNFORTUNATELY THE WELDING MACHINE, BUT HAS BEEN USED ACCORDING TO PREVIOUS OWNER UNTIL CLOSURE. WE SELL THE ITEM AS DEFECTIVE, OR CARRIER OF PART OF. A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Precio: 15.900 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-young rf 50
unfortunately, the machine has problems with the height adjustment, which is why we offer them as defective or the battles for spare parts. YOUNG RF 50 UNFORTUNATELY, THE MACHINE HAS PROBLEMS WITH THE HEIGHT ADJUSTMENT, WHICH IS WHY WE OFFER THEM AS DEFECTIVE OR THE BATTLES FOR SPARE PARTS.
Vendedor: IDS Trade GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 470 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 1900 x 1400 x 1800 mm<br/>description: grinder Ø between 180 and 300 mm. see photo WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 1900 X 1400 X 1800 MM
DESCRIPTION: GRINDER Ø BETWEEN 180 AND 300 MM. SEE PHOTO
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-something printed unfortunately something on the page. see photos.
works and as good as new.
no deposited dust of cooler and smell.
015254306961 SOMETHING PRINTED UNFORTUNATELY SOMETHING ON THE PAGE. SEE PHOTOS. WORKS AND AS GOOD AS NEW. NO DEPOSITED DUST OF COOLER AND SMELL. 015254306961
Vendedor: Herr thienlan
Año de construcción: usado
Ubicación: Land-grinding diameter: 190 mm<br/>grinding length: 250 mm<br/>centre height: 95 mm<br/>grinding wheel size: 300 x 25 x 127 mm<br/>turning speeds: 2800 u/min<br/>workpiece turning speeds: 260 - 700 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: 0,8 t<br/>dimensions of the machine ca.: 1,2 x 0,8 x 1,5 m<br/>very nice condition, under power, accessories!<br/><br/><br/><br/><br/> GRINDING DIAMETER: 190 MM
GRINDING LENGTH: 250 MM
CENTRE HEIGHT: 95 MM
GRINDING WHEEL SIZE: 300 X 25 X 127 MM
TURNING SPEEDS: 2800 U/MIN
WORKPIECE TURNING SPEEDS: 260 - 700 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 0,8 T
DIMENSIONS OF THE MACHINE CA.: 1,2 X 0,8 X 1,5 M
VERY NICE CONDITION, UNDER POWER, ACCESSORIES!




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-tschudin cylindrical grinding machine with feeder
because there is no nameplate i can do unfortunately no further details
not complete and may be broken to make possible an accurate picture of the machine, i recommend a visit to

changes and errors in the technical data and information and subject to prior sale!

TSCHUDIN CYLINDRICAL GRINDING MACHINE WITH FEEDER BECAUSE THERE IS NO NAMEPLATE I CAN DO UNFORTUNATELY NO FURTHER DETAILS NOT COMPLETE AND MAY BE BROKEN TO MAKE POSSIBLE AN ACCURATE PICTURE OF THE MACHINE, I RECOMMEND A VISIT TO CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-to see the press as shown in the pictures.
povl mã¸llers borup ep16

unfortunately no nameplate is off so i can do unfortunately no further details.
a visit to power is always possible.

changes and errors in the technical data and information and subject to prior sale! TO SEE THE PRESS AS SHOWN IN THE PICTURES. POVL M&ATILDE;&CEDIL;LLERS BORUP EP16 UNFORTUNATELY NO NAMEPLATE IS OFF SO I CAN DO UNFORTUNATELY NO FURTHER DETAILS. A VISIT TO POWER IS ALWAYS POSSIBLE. CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-to see the press as shown in the pictures.
dirinler edp300
can unfortunately no further information provide.
a visit to power is always possible.

changes and errors in the technical data and information and subject to prior sale!

TO SEE THE PRESS AS SHOWN IN THE PICTURES. DIRINLER EDP300 CAN UNFORTUNATELY NO FURTHER INFORMATION PROVIDE. A VISIT TO POWER IS ALWAYS POSSIBLE. CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 350 mm<br/>grinding length: 630 mm<br/>centre height: 175 mm<br/>centre distance: 630 mm<br/>total power requirement:  kw<br/>weight of the machine ca.: 4,4 t<br/>dimensions of the machine ca.:  m<br/>universal external and internal cylindrical grinding machine <br/><br/>equipments:<br/>swiveling internal grinding device with fortuna internal grinding spindle<br/>type fivs 60x315l<br/>2-axis digital display heidenhain<br/>tailstock<br/>magnetic chuck<br/>various grinding wheels with flanges<br/>other accessories for the machine.<br/>two special cabinets for the storage of grinding wheels<br/>separate control cabinet<br/>coolant tank with pump<br/>complete documentation with operating instructions<br/><br/>technical specifications:<br/>center distance 630 mm<br/>center height 175 mm<br/>workpiece passage 350 mm<br/>grinding wheel diameter 500 mm<br/>maximum grinding wheel width 123 mm<br/>grinding wheel drive power 5.5 kw<br/>grinding wheel peripheral speed 35 m / s<br/>largest grinding diameter 350 mm<br/>grinding length between the center 630 mm<br/>largest workpiece weight between the center about 300 kg<br/>largest workpiece weight with chuck approx. 100 kg<br/>machine weight approx. 4400 kg<br/><br/><br/><br/><br/> GRINDING DIAMETER: 350 MM
GRINDING LENGTH: 630 MM
CENTRE HEIGHT: 175 MM
CENTRE DISTANCE: 630 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 4,4 T
DIMENSIONS OF THE MACHINE CA.: M
UNIVERSAL EXTERNAL AND INTERNAL CYLINDRICAL GRINDING MACHINE

EQUIPMENTS:
SWIVELING INTERNAL GRINDING DEVICE WITH FORTUNA INTERNAL GRINDING SPINDLE
TYPE FIVS 60X315L
2-AXIS DIGITAL DISPLAY HEIDENHAIN
TAILSTOCK
MAGNETIC CHUCK
VARIOUS GRINDING WHEELS WITH FLANGES
OTHER ACCESSORIES FOR THE MACHINE.
TWO SPECIAL CABINETS FOR THE STORAGE OF GRINDING WHEELS
SEPARATE CONTROL CABINET
COOLANT TANK WITH PUMP
COMPLETE DOCUMENTATION WITH OPERATING INSTRUCTIONS

TECHNICAL SPECIFICATIONS:
CENTER DISTANCE 630 MM
CENTER HEIGHT 175 MM
WORKPIECE PASSAGE 350 MM
GRINDING WHEEL DIAMETER 500 MM
MAXIMUM GRINDING WHEEL WIDTH 123 MM
GRINDING WHEEL DRIVE POWER 5.5 KW
GRINDING WHEEL PERIPHERAL SPEED 35 M / S
LARGEST GRINDING DIAMETER 350 MM
GRINDING LENGTH BETWEEN THE CENTER 630 MM
LARGEST WORKPIECE WEIGHT BETWEEN THE CENTER ABOUT 300 KG
LARGEST WORKPIECE WEIGHT WITH CHUCK APPROX. 100 KG
MACHINE WEIGHT APPROX. 4400 KG




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Precio: 1.150 €
Ubicación: Land-boring machine, drilling unit, drill with pneumatic feed and control

we have drilled 2 holes in aluringe on this machine.
the drilling units are now montiert-at an angle can be aligned but again achsparallel.
other data are unfortunately not known

changes and errors in the technical data and information and subject to prior sale!

BORING MACHINE, DRILLING UNIT, DRILL WITH PNEUMATIC FEED AND CONTROL WE HAVE DRILLED 2 HOLES IN ALURINGE ON THIS MACHINE. THE DRILLING UNITS ARE NOW MONTIERT-AT AN ANGLE CAN BE ALIGNED BUT AGAIN ACHSPARALLEL. OTHER DATA ARE UNFORTUNATELY NOT KNOWN CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-grinding wheel diameter: 0 mm<br/>power requirement: 0 kw<br/>following grinding spindles available:<br/>2 fortuna sa 100 x 340.20 r, nr. 126 334, 1.600 u/min<br/>2 fortuna sa 85 x 272.2 r, nr. 100 588, 2.500 u/min<br/>1 fortuna favs 100 r, 250.250, 12.000 u/min<br/>1 fortuna sa 90 x 418.24r, 2.800 u/min<br/>1 skf a-10 332 93-1/115<br/>1 skf 1033293-1 (ex hoefler)<br/>1 skf 1033293-2 (ex hoefler)<br/>1 skf 1040329 (ex hoefler)<br/>1 dkf/ddr, 6.259/2<br/>1 sfj, afs 50<br/>1 unknown 50x250, z149<br/><br/><br/><br/><br/> GRINDING WHEEL DIAMETER: 0 MM
POWER REQUIREMENT: 0 KW
FOLLOWING GRINDING SPINDLES AVAILABLE:
2 FORTUNA SA 100 X 340.20 R, NR. 126 334, 1.600 U/MIN
2 FORTUNA SA 85 X 272.2 R, NR. 100 588, 2.500 U/MIN
1 FORTUNA FAVS 100 R, 250.250, 12.000 U/MIN
1 FORTUNA SA 90 X 418.24R, 2.800 U/MIN
1 SKF A-10 332 93-1/115
1 SKF 1033293-1 (EX HOEFLER)
1 SKF 1033293-2 (EX HOEFLER)
1 SKF 1040329 (EX HOEFLER)
1 DKF/DDR, 6.259/2
1 SFJ, AFS 50
1 UNKNOWN 50X250, Z149




Vendedor: SK Maschinen-Service GmbH
Año de construcción: usado
Precio: 950 €
Ubicación: Land-orbital riveting machine as shown in the pictures.
manufacturers probably steinel
unfortunately no nameplate is off so i can do unfortunately no further details.

changes and errors in the technical data and information and subject to prior sale!

ORBITAL RIVETING MACHINE AS SHOWN IN THE PICTURES. MANUFACTURERS PROBABLY STEINEL UNFORTUNATELY NO NAMEPLATE IS OFF SO I CAN DO UNFORTUNATELY NO FURTHER DETAILS. CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-grinding diameter: 510 mm<br/>grinding length: 2500 mm<br/>centre height: 260 mm<br/>grinding wheel dia. x width: 800x100 mm<br/>cone grinding up to: +/-4/5 grad<br/>workpiece turning speeds: 12-190 u/min<br/>total power requirement:  kw<br/>weight of the machine ca.: 13 t<br/>dimensions of the machine ca.: 5x5x1,8 m<br/><br/><br/><br/><br/> GRINDING DIAMETER: 510 MM
GRINDING LENGTH: 2500 MM
CENTRE HEIGHT: 260 MM
GRINDING WHEEL DIA. X WIDTH: 800X100 MM
CONE GRINDING UP TO: +/-4/5 GRAD
WORKPIECE TURNING SPEEDS: 12-190 U/MIN
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 13 T
DIMENSIONS OF THE MACHINE CA.: 5X5X1,8 M




Vendedor: Markus Hirsch GmbH
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-notching machine hydraulically as shown on the pictures to see.
adjustable stops

unfortunately no nameplate is off so i can do unfortunately no further details.

a visit to power is always possible.

changes and errors in the technical data and information and subject to prior sale! NOTCHING MACHINE HYDRAULICALLY AS SHOWN ON THE PICTURES TO SEE. ADJUSTABLE STOPS UNFORTUNATELY NO NAMEPLATE IS OFF SO I CAN DO UNFORTUNATELY NO FURTHER DETAILS. A VISIT TO POWER IS ALWAYS POSSIBLE. CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-drilling capacity diameter max.: 25 ( in steel st.60) mm<br/>drilling capacity diameter min.: 3 (4) mm<br/>bore depth: 1000 mm<br/>numbers of pallets: 2 <br/>size of pallet: 1000 x 800 mm<br/>control: siemens 840 d <br/>number of controlled axis: 5 <br/>travel -x axis: 2000 mm<br/>travel -y axis: 1000 mm<br/>travel -z axis: 1500 (1340) mm<br/>travel -w axis: 1000 mm<br/>b-axis (table): 360° deg<br/>workpiece dia.: max. 1700 (störkreis) mm<br/>spindle turning speed range: 1250/2950/6880/15000 u/min<br/>output: 7/16/7/2 (100 %) kw<br/>output: 8,4/19,2/8,4/2,4 (60 %) kw<br/>torque: 60/55/12/1,5 nm<br/>feed speed: 0 - 15000 (z) m/min.<br/>feed speeds: 100 - 10000 (x) mm/min<br/>feed speeds: 100 - 10000 (y) mm/min<br/>feed speeds: 100 - 10000 (w) mm/min<br/>table load: 5000 (nutzlast) dan<br/>total power requirement: 32 (100a) kw<br/>weight of the machine ca.: 16650 kg<br/>dimensions of the machine ca.: 7,8 x 6,15 x 3,26 m<br/>cnc deephole boring machine with pallet-changer<br/><br/>equipment:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>machine in very good condition, now stored in our warehouse in düsseldorf (not<br/>under power).<br/><br/>equipment / accessories:<br/>pallet changer with two pallets<br/>housing<br/>15 off boring bars<br/>machine documentation in german language<br/>coolant equipment<br/>chip (swarf) conveyor<br/><br/>the previous owner ist he company multivac.<br/>multivac is the leader in horizontal thermoforming packaging solutions. <br/>with our thermoforming machines pack efficiently and economically a wide range <br/>of products such. <br/>as food, industrial and consumer products and medical and pharmaceutical <br/>products.<br/><br/>some more technical details:<br/>cnc deep hole drilling machine with pallet changer<br/><br/>technical specifications:<br/>scope of application<br/>deep drilling<br/>spindle number 1<br/>bore slide stroke 1500 mm, with 2 steadies 1340 mm<br/>drilling method single-fluted gun drill<br/>drilling depth max. 1000 mm with 2 steadies<br/>drilling (in steel st.60)<br/>min. diameter 4 mm (standard)<br/>min. diameter 3 mm (optional)<br/>max. diameter 25 mm<br/>with single-fluted gun drill<br/><br/>boring drive<br/>manufacturer fortuna, msl-rz 210 fl 15/7<br/>without spindle cooling, with lifetime grease filling, with ptc,<br/>with temperature sensor, with sealing air connection 0,8 bar<br/>speeds 1250/2950/6880/15000 rpm<br/>power 7/16/7/2 kw at 100%<br/>power 8.4 / 19.2 / 8.4 / 2.4 kw at 60%<br/>torque 60/55/12 / 1.5 nm<br/><br/>z-axis<br/>feed speeds 0-15000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 20 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>feed force 1000 dan<br/>travel 1500 mm (1340 mm with 2 steadies)<br/><br/>x axis <br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel 2000 mm<br/><br/>y-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ern 1387<br/>travel 1000 mm<br/><br/><br/>w-axis<br/>roller monorail rue 55<br/>feed speeds from 100 to 10000 mm / min.<br/>rapid traverse rate 15 m / min.<br/>engine power 27 nm at 2000 rpm<br/>integrated encoder type ag 612<br/>travel  1000 mm<br/><br/>worktable<br/>clamping size 1000 x 800 mm<br/>angle measurement directly display on the screen, 360 deg continuously <br/>rotatably.<br/>b-axis integrated rotary encoder type rod 426<br/>max. table load 5000 dan<br/>transport capacity 25000 nm<br/>t-slots along 7 piece<br/>aligning slots lengthwise and crosswise 1<br/>centering 1<br/><br/>nc table<br/>type pktf<br/>size 45<br/>engine power 27 nm<br/>speed 3000 rpm<br/>reduction 1: 180 + 1: 2<br/>clamping hydraulically<br/>clamping force 34 kn<br/>max. turning speed 10 1 / min.<br/>dividing accuracy +/- 6.75 <br/><br/>voltage<br/>operating voltage 400 v<br/>frequency 50 hz<br/>control voltage 230 v / 24 v<br/>total power 32 kw<br/>cross section 35 mm²<br/>fuse 100 a<br/>rated current 72 a<br/><br/>main dimensions<br/>length x width x height approx. 7800 x 6150 x 3260 mm<br/>transport weight 15 t<br/><br/>coolant system<br/>cooling lubricant emulsion<br/>km-1000 l container with level indicator<br/>submersible pump 100 ltr. at 5 bar<br/>submersible pump 20 ltr. at 0.52 bar<br/>high-pressure pump unit 56 l / min. at 80 bar, 75 l / min. at 70 bar<br/>?rollensieb? filter flow rate 100 l / min.<br/>submersible pump 100 ltr. at 0.5 bar<br/>chip conveying chips amount approximately 25 kg / h<br/><br/>description of the machine:<br/>the complete solution with high-frequency spindle and coolant system in<br/>machine bed is integrated for machining different workpieces suitable.<br/><br/>the drilling machine is equipped with a circular dividing table.<br/>the rotary indexing table is individually displaced.<br/><br/>the workpiece clamping, drill bushing and editing tools (possibly<br/>steady rest) are select the workpiece to be machined accordingly<br/><br/>(additional equipment).<br/>processing methods<br/>this boring machine is designed for deep drilling (single-fluted gun drill).<br/><br/>processing unit<br/>the spindle unit is mounted on a feed slide with linear rolling guides <br/>assembled. <br/>the feed drive is infinitely adjustable.<br/>the rapid traverse speed is determined by the nc program (parameters)<br/>and monitored.<br/><br/>the spindle speed is infinitely variable (frequency controlled) the<br/>performance data for the main and feed drives through the digital<br/>drive technology is available directly from the inverters.<br/><br/>the spindle bearing is a precision spindle bearing with lifetime grease <br/>lubrication.<br/><br/>sealing air against the penetration of the cooling lubricant.<br/><br/>workpiece clamping<br/>the nc rotary table has a clamping area of 1000 x 800 mm.<br/>the rotary indexing table is adjustable by electric motors. the position<br/>is detected by a rotary encoder and displayed in the control picture.<br/>the rotary indexing table is hydraulically clamped in the basic position.<br/>the surface of the circular table top section is as pallet clamping station<br/>educated.<br/><br/>the traveling column (x-axis) is mounted on linear roller guides.<br/>the feed drive is adjustable. the positioning of the traveling column<br/>via the the nc program.<br/><br/>steady rest<br/>the steady rest serves to support the drill pipe. the steady rest bush<br/>reduces the drill pipe and machining vibrations. the retreat is<br/>determined via a roller chain and set.<br/><br/>additional equipment<br/>the coolant system with high-pressure diaphragm piston pump, chip conveyor<br/>?rollensieb? filter, mud pump, submersible pump pumps the cleaned cooling<br/>lubricant for drilling.<br/><br/>cnc control consisting of a siemens sinumerik 840 d including<br/>plc s7-300, slimline operator panel (op31) with color display and operating and<br/>control panel with override function.<br/><br/>nc / plc<br/>the machine is equipped with an nc control for deep hole drilling machines and a<br/>memory programming controller (plc) equipped.<br/><br/>equipment:<br/>fully protective housing<br/>separate electric cabinet<br/>machine documentation in german language<br/>various drill spindles, 15 pcs.<br/><br/><br/><br/><br/><br/><br/> DRILLING CAPACITY DIAMETER MAX.: 25 ( IN STEEL ST.60) MM
DRILLING CAPACITY DIAMETER MIN.: 3 (4) MM
BORE DEPTH: 1000 MM
NUMBERS OF PALLETS: 2
SIZE OF PALLET: 1000 X 800 MM
CONTROL: SIEMENS 840 D
NUMBER OF CONTROLLED AXIS: 5
TRAVEL -X AXIS: 2000 MM
TRAVEL -Y AXIS: 1000 MM
TRAVEL -Z AXIS: 1500 (1340) MM
TRAVEL -W AXIS: 1000 MM
B-AXIS (TABLE): 360° DEG
WORKPIECE DIA.: MAX. 1700 (STöRKREIS) MM
SPINDLE TURNING SPEED RANGE: 1250/2950/6880/15000 U/MIN
OUTPUT: 7/16/7/2 (100 %) KW
OUTPUT: 8,4/19,2/8,4/2,4 (60 %) KW
TORQUE: 60/55/12/1,5 NM
FEED SPEED: 0 - 15000 (Z) M/MIN.
FEED SPEEDS: 100 - 10000 (X) MM/MIN
FEED SPEEDS: 100 - 10000 (Y) MM/MIN
FEED SPEEDS: 100 - 10000 (W) MM/MIN
TABLE LOAD: 5000 (NUTZLAST) DAN
TOTAL POWER REQUIREMENT: 32 (100A) KW
WEIGHT OF THE MACHINE CA.: 16650 KG
DIMENSIONS OF THE MACHINE CA.: 7,8 X 6,15 X 3,26 M
CNC DEEPHOLE BORING MACHINE WITH PALLET-CHANGER

EQUIPMENT:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

MACHINE IN VERY GOOD CONDITION, NOW STORED IN OUR WAREHOUSE IN DüSSELDORF (NOT
UNDER POWER).

EQUIPMENT / ACCESSORIES:
PALLET CHANGER WITH TWO PALLETS
HOUSING
15 OFF BORING BARS
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
COOLANT EQUIPMENT
CHIP (SWARF) CONVEYOR

THE PREVIOUS OWNER IST HE COMPANY MULTIVAC.
MULTIVAC IS THE LEADER IN HORIZONTAL THERMOFORMING PACKAGING SOLUTIONS.
WITH OUR THERMOFORMING MACHINES PACK EFFICIENTLY AND ECONOMICALLY A WIDE RANGE
OF PRODUCTS SUCH.
AS FOOD, INDUSTRIAL AND CONSUMER PRODUCTS AND MEDICAL AND PHARMACEUTICAL
PRODUCTS.

SOME MORE TECHNICAL DETAILS:
CNC DEEP HOLE DRILLING MACHINE WITH PALLET CHANGER

TECHNICAL SPECIFICATIONS:
SCOPE OF APPLICATION
DEEP DRILLING
SPINDLE NUMBER 1
BORE SLIDE STROKE 1500 MM, WITH 2 STEADIES 1340 MM
DRILLING METHOD SINGLE-FLUTED GUN DRILL
DRILLING DEPTH MAX. 1000 MM WITH 2 STEADIES
DRILLING (IN STEEL ST.60)
MIN. DIAMETER 4 MM (STANDARD)
MIN. DIAMETER 3 MM (OPTIONAL)
MAX. DIAMETER 25 MM
WITH SINGLE-FLUTED GUN DRILL

BORING DRIVE
MANUFACTURER FORTUNA, MSL-RZ 210 FL 15/7
WITHOUT SPINDLE COOLING, WITH LIFETIME GREASE FILLING, WITH PTC,
WITH TEMPERATURE SENSOR, WITH SEALING AIR CONNECTION 0,8 BAR
SPEEDS 1250/2950/6880/15000 RPM
POWER 7/16/7/2 KW AT 100%
POWER 8.4 / 19.2 / 8.4 / 2.4 KW AT 60%
TORQUE 60/55/12 / 1.5 NM

Z-AXIS
FEED SPEEDS 0-15000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 20 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
FEED FORCE 1000 DAN
TRAVEL 1500 MM (1340 MM WITH 2 STEADIES)

X AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 2000 MM

Y-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE ERN 1387
TRAVEL 1000 MM


W-AXIS
ROLLER MONORAIL RUE 55
FEED SPEEDS FROM 100 TO 10000 MM / MIN.
RAPID TRAVERSE RATE 15 M / MIN.
ENGINE POWER 27 NM AT 2000 RPM
INTEGRATED ENCODER TYPE AG 612
TRAVEL 1000 MM

WORKTABLE
CLAMPING SIZE 1000 X 800 MM
ANGLE MEASUREMENT DIRECTLY DISPLAY ON THE SCREEN, 360 DEG CONTINUOUSLY
ROTATABLY.
B-AXIS INTEGRATED ROTARY ENCODER TYPE ROD 426
MAX. TABLE LOAD 5000 DAN
TRANSPORT CAPACITY 25000 NM
T-SLOTS ALONG 7 PIECE
ALIGNING SLOTS LENGTHWISE AND CROSSWISE 1
CENTERING 1

NC TABLE
TYPE PKTF
SIZE 45
ENGINE POWER 27 NM
SPEED 3000 RPM
REDUCTION 1: 180 + 1: 2
CLAMPING HYDRAULICALLY
CLAMPING FORCE 34 KN
MAX. TURNING SPEED 10 1 / MIN.
DIVIDING ACCURACY +/- 6.75

VOLTAGE
OPERATING VOLTAGE 400 V
FREQUENCY 50 HZ
CONTROL VOLTAGE 230 V / 24 V
TOTAL POWER 32 KW
CROSS SECTION 35 MM²
FUSE 100 A
RATED CURRENT 72 A

MAIN DIMENSIONS
LENGTH X WIDTH X HEIGHT APPROX. 7800 X 6150 X 3260 MM
TRANSPORT WEIGHT 15 T

COOLANT SYSTEM
COOLING LUBRICANT EMULSION
KM-1000 L CONTAINER WITH LEVEL INDICATOR
SUBMERSIBLE PUMP 100 LTR. AT 5 BAR
SUBMERSIBLE PUMP 20 LTR. AT 0.52 BAR
HIGH-PRESSURE PUMP UNIT 56 L / MIN. AT 80 BAR, 75 L / MIN. AT 70 BAR
?ROLLENSIEB? FILTER FLOW RATE 100 L / MIN.
SUBMERSIBLE PUMP 100 LTR. AT 0.5 BAR
CHIP CONVEYING CHIPS AMOUNT APPROXIMATELY 25 KG / H

DESCRIPTION OF THE MACHINE:
THE COMPLETE SOLUTION WITH HIGH-FREQUENCY SPINDLE AND COOLANT SYSTEM IN
MACHINE BED IS INTEGRATED FOR MACHINING DIFFERENT WORKPIECES SUITABLE.

THE DRILLING MACHINE IS EQUIPPED WITH A CIRCULAR DIVIDING TABLE.
THE ROTARY INDEXING TABLE IS INDIVIDUALLY DISPLACED.

THE WORKPIECE CLAMPING, DRILL BUSHING AND EDITING TOOLS (POSSIBLY
STEADY REST) ARE SELECT THE WORKPIECE TO BE MACHINED ACCORDINGLY

(ADDITIONAL EQUIPMENT).
PROCESSING METHODS
THIS BORING MACHINE IS DESIGNED FOR DEEP DRILLING (SINGLE-FLUTED GUN DRILL).

PROCESSING UNIT
THE SPINDLE UNIT IS MOUNTED ON A FEED SLIDE WITH LINEAR ROLLING GUIDES
ASSEMBLED.
THE FEED DRIVE IS INFINITELY ADJUSTABLE.
THE RAPID TRAVERSE SPEED IS DETERMINED BY THE NC PROGRAM (PARAMETERS)
AND MONITORED.

THE SPINDLE SPEED IS INFINITELY VARIABLE (FREQUENCY CONTROLLED) THE
PERFORMANCE DATA FOR THE MAIN AND FEED DRIVES THROUGH THE DIGITAL
DRIVE TECHNOLOGY IS AVAILABLE DIRECTLY FROM THE INVERTERS.

THE SPINDLE BEARING IS A PRECISION SPINDLE BEARING WITH LIFETIME GREASE
LUBRICATION.

SEALING AIR AGAINST THE PENETRATION OF THE COOLING LUBRICANT.

WORKPIECE CLAMPING
THE NC ROTARY TABLE HAS A CLAMPING AREA OF 1000 X 800 MM.
THE ROTARY INDEXING TABLE IS ADJUSTABLE BY ELECTRIC MOTORS. THE POSITION
IS DETECTED BY A ROTARY ENCODER AND DISPLAYED IN THE CONTROL PICTURE.
THE ROTARY INDEXING TABLE IS HYDRAULICALLY CLAMPED IN THE BASIC POSITION.
THE SURFACE OF THE CIRCULAR TABLE TOP SECTION IS AS PALLET CLAMPING STATION
EDUCATED.

THE TRAVELING COLUMN (X-AXIS) IS MOUNTED ON LINEAR ROLLER GUIDES.
THE FEED DRIVE IS ADJUSTABLE. THE POSITIONING OF THE TRAVELING COLUMN
VIA THE THE NC PROGRAM.

STEADY REST
THE STEADY REST SERVES TO SUPPORT THE DRILL PIPE. THE STEADY REST BUSH
REDUCES THE DRILL PIPE AND MACHINING VIBRATIONS. THE RETREAT IS
DETERMINED VIA A ROLLER CHAIN AND SET.

ADDITIONAL EQUIPMENT
THE COOLANT SYSTEM WITH HIGH-PRESSURE DIAPHRAGM PISTON PUMP, CHIP CONVEYOR
?ROLLENSIEB? FILTER, MUD PUMP, SUBMERSIBLE PUMP PUMPS THE CLEANED COOLING
LUBRICANT FOR DRILLING.

CNC CONTROL CONSISTING OF A SIEMENS SINUMERIK 840 D INCLUDING
PLC S7-300, SLIMLINE OPERATOR PANEL (OP31) WITH COLOR DISPLAY AND OPERATING AND
CONTROL PANEL WITH OVERRIDE FUNCTION.

NC / PLC
THE MACHINE IS EQUIPPED WITH AN NC CONTROL FOR DEEP HOLE DRILLING MACHINES AND A
MEMORY PROGRAMMING CONTROLLER (PLC) EQUIPPED.

EQUIPMENT:
FULLY PROTECTIVE HOUSING
SEPARATE ELECTRIC CABINET
MACHINE DOCUMENTATION IN GERMAN LANGUAGE
VARIOUS DRILL SPINDLES, 15 PCS.






Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Precio: 10.700 €
Ubicación: Land-thrust ground, crushers, shredders for chipboard, solid wood and the crushed pallets

machine is unfortunately no hour meter, it has gone but obviously still not much

a video of the current machine can be sent on request.

big gl 6
hopper size, approx. 800 x 1000 x 900 mm, throw 1300 x 800 mm
rotor length 800 mm, rotor diameter 252 mm
low-speed
engine 18, 5kw
sieve diameter top 15 mm, 12 mm
shaft 19 knives
the knives are freshly turned and rotate 5 x at least.
dust spout 200 mm
operating instructions
without shown orange cord.
original paint, top condition

dimensions approx. 2100 x 1350 x 1650 mm (lxwxh). weight approx. 1500kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". THRUST GROUND, CRUSHERS, SHREDDERS FOR CHIPBOARD, SOLID WOOD AND THE CRUSHED PALLETS MACHINE IS UNFORTUNATELY NO HOUR METER, IT HAS GONE BUT OBVIOUSLY STILL NOT MUCH A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. BIG GL 6 HOPPER SIZE, APPROX. 800 X 1000 X 900 MM, THROW 1300 X 800 MM ROTOR LENGTH 800 MM, ROTOR DIAMETER 252 MM LOW-SPEED ENGINE 18, 5KW SIEVE DIAMETER TOP 15 MM, 12 MM SHAFT 19 KNIVES THE KNIVES ARE FRESHLY TURNED AND ROTATE 5 X AT LEAST. DUST SPOUT 200 MM OPERATING INSTRUCTIONS WITHOUT SHOWN ORANGE CORD. ORIGINAL PAINT, TOP CONDITION DIMENSIONS APPROX. 2100 X 1350 X 1650 MM (LXWXH). WEIGHT APPROX. 1500KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-internal diameter: 20/300 mm<br/>grinding depth: 250 mm<br/>swing diameter: 250 mm<br/>workpiece spindle - bore: 45 mm<br/>workpiece spindle swivable +/-: 25 °<br/>taper setting angle of the workpiece column: 50 °<br/>work piece spindle speed: 42 - 400 u/min<br/>grinding spindle speed: 10.000 u/min<br/>table speed -stepless-: 0,1 - 8 m/min<br/>grinding spindle drive: 4 kw<br/>power capacity: 10 kw<br/>weight of the machine ca.: 4.500 kg<br/>dimensions of the machine ca.:  m<br/>:  <br/>:  <br/>:  <br/>:  <br/>:  <br/><br/>internal grinding Æ, min./max.                      20 / 300 mm<br/>grinding depth                                           500 mm<br/>table stroke, min./max.                              5 / 800 mm<br/> <br/>height of centres above table                            250 mm<br/>swing Æ in the table recess                              600 mm<br/><br/>workspindle bore                                     62 / 45 mm<br/>swivability of workpiece wheelhead                        25 °<br/>max. taper angle which can be ground                      50 °<br/>infeed, per stroke                              0.0025 - 0.5 mm<br/><br/>workspindle speeds                                  20 - 400 rpm<br/>grinding spindle speeds                               10,000 rpm<br/><br/>table speeds, steplessly adjustable                  0.1 - 8 m/min<br/><br/>grinding spindle drive                   4   kw<br/>total electical load approx.             8.3 kw - 380 v - 50 hz<br/>weight approx.                                         4,500 kg<br/><br/>accessories / special features<br/>* manually swivable face grinding equipment with cup wheel,<br/>  approx. Æ 150 mm, and built-on dressing device.  longitudinal<br/>  travel approx. 350 mm.<br/>* fortuna internal grinding spindle, model si 80 x 630, <br/>  n = 10,000 rpm.<br/>* hydraulically swivable diamond dressing device for the internal<br/>  grinding spindle.<br/>* separate coolant equipment.<br/><br/><br/><br/> INTERNAL DIAMETER: 20/300 MM
GRINDING DEPTH: 250 MM
SWING DIAMETER: 250 MM
WORKPIECE SPINDLE - BORE: 45 MM
WORKPIECE SPINDLE SWIVABLE +/-: 25 °
TAPER SETTING ANGLE OF THE WORKPIECE COLUMN: 50 °
WORK PIECE SPINDLE SPEED: 42 - 400 U/MIN
GRINDING SPINDLE SPEED: 10.000 U/MIN
TABLE SPEED -STEPLESS-: 0,1 - 8 M/MIN
GRINDING SPINDLE DRIVE: 4 KW
POWER CAPACITY: 10 KW
WEIGHT OF THE MACHINE CA.: 4.500 KG
DIMENSIONS OF THE MACHINE CA.: M
:
:
:
:
:

INTERNAL GRINDING Æ, MIN./MAX. 20 / 300 MM
GRINDING DEPTH 500 MM
TABLE STROKE, MIN./MAX. 5 / 800 MM

HEIGHT OF CENTRES ABOVE TABLE 250 MM
SWING Æ IN THE TABLE RECESS 600 MM

WORKSPINDLE BORE 62 / 45 MM
SWIVABILITY OF WORKPIECE WHEELHEAD 25 °
MAX. TAPER ANGLE WHICH CAN BE GROUND 50 °
INFEED, PER STROKE 0.0025 - 0.5 MM

WORKSPINDLE SPEEDS 20 - 400 RPM
GRINDING SPINDLE SPEEDS 10,000 RPM

TABLE SPEEDS, STEPLESSLY ADJUSTABLE 0.1 - 8 M/MIN

GRINDING SPINDLE DRIVE 4 KW
TOTAL ELECTICAL LOAD APPROX. 8.3 KW - 380 V - 50 HZ
WEIGHT APPROX. 4,500 KG

ACCESSORIES / SPECIAL FEATURES
* MANUALLY SWIVABLE FACE GRINDING EQUIPMENT WITH CUP WHEEL,
APPROX. Æ 150 MM, AND BUILT-ON DRESSING DEVICE. LONGITUDINAL
TRAVEL APPROX. 350 MM.
* FORTUNA INTERNAL GRINDING SPINDLE, MODEL SI 80 X 630,
N = 10,000 RPM.
* HYDRAULICALLY SWIVABLE DIAMOND DRESSING DEVICE FOR THE INTERNAL
GRINDING SPINDLE.
* SEPARATE COOLANT EQUIPMENT.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Precio: 7.000 €
Ubicación: Land-the buyer must organize a collection with forklift itself because we unfortunately do not have.

the machine and extraction function properly.

the detailed description follows promptly. THE BUYER MUST ORGANIZE A COLLECTION WITH FORKLIFT ITSELF BECAUSE WE UNFORTUNATELY DO NOT HAVE. THE MACHINE AND EXTRACTION FUNCTION PROPERLY. THE DETAILED DESCRIPTION FOLLOWS PROMPTLY.
Vendedor: PAPERSHRED®
Año de construcción: usado
Ubicación: Land-max. grinding diameter: 400 mm<br/>grinding width: 0 mm<br/>max. module:  <br/>min. module:  <br/>total power requirement: 3 kw<br/>weight of the machine ca.: 4,2 t<br/>dimensions of the machine ca.:  m<br/>shaver cutter Ø, min./max.	64 - 320	mm<br/>module range	1 - 12<br/>shaver cutter width, max.	40	mm<br/><br/>no. of teeth	13 - 240<br/>pitch block Ø	73 - 320	mm<br/><br/>speeds of workpiece slide	5 / 20 / 30 / 40	teeth per min.<br/>grinding slide speed	690	rpm<br/>grinding slide Ø	762	mm<br/><br/>grinding wheel swivelling (pressure angle)	5 - 21	°<br/>grinding slide swivelling (helical angle)	2 x 35	°<br/>grinding slide adjustment, vertical	240	mm<br/><br/>cutting speed	1 / 0.5 / 0.25	m/min<br/><br/>spindle drive	1.1 	kw<br/>total electrical load, approx.	3 kw  -  500 v  -  50	hz<br/>weight, approx.	4,200	kg<br/><br/>accessories / special features    <br/>*	machine is suitable for grinding internal and external shaver cutters.  it is also suitable for master gears as well as cutters for gear shapers.<br/><br/>unfortunately the machine does not have many accessories.  it would therefore be a good investment as a second machine if you already have suitable accessories available.<br/><br/><br/><br/> MAX. GRINDING DIAMETER: 400 MM
GRINDING WIDTH: 0 MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: 3 KW
WEIGHT OF THE MACHINE CA.: 4,2 T
DIMENSIONS OF THE MACHINE CA.: M
SHAVER CUTTER Ø, MIN./MAX. 64 - 320 MM
MODULE RANGE 1 - 12
SHAVER CUTTER WIDTH, MAX. 40 MM

NO. OF TEETH 13 - 240
PITCH BLOCK Ø 73 - 320 MM

SPEEDS OF WORKPIECE SLIDE 5 / 20 / 30 / 40 TEETH PER MIN.
GRINDING SLIDE SPEED 690 RPM
GRINDING SLIDE Ø 762 MM

GRINDING WHEEL SWIVELLING (PRESSURE ANGLE) 5 - 21 °
GRINDING SLIDE SWIVELLING (HELICAL ANGLE) 2 X 35 °
GRINDING SLIDE ADJUSTMENT, VERTICAL 240 MM

CUTTING SPEED 1 / 0.5 / 0.25 M/MIN

SPINDLE DRIVE 1.1 KW
TOTAL ELECTRICAL LOAD, APPROX. 3 KW - 500 V - 50 HZ
WEIGHT, APPROX. 4,200 KG

ACCESSORIES / SPECIAL FEATURES
* MACHINE IS SUITABLE FOR GRINDING INTERNAL AND EXTERNAL SHAVER CUTTERS. IT IS ALSO SUITABLE FOR MASTER GEARS AS WELL AS CUTTERS FOR GEAR SHAPERS.

UNFORTUNATELY THE MACHINE DOES NOT HAVE MANY ACCESSORIES. IT WOULD THEREFORE BE A GOOD INVESTMENT AS A SECOND MACHINE IF YOU ALREADY HAVE SUITABLE ACCESSORIES AVAILABLE.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-fortuna automat gr. 4 - 30pcs
sandwich press

used

professional long-lasting roll press
for round and square buns from 85 to 120 g
mechanical head count
new paint job

accessories:
2 work plate

technical data:
manufacturer: schrã¶der, staffelstein
type: fortuna automat gr. 4
380 v 50 hz
the machine has no nameplate.

dimensions:
width: 75 cm
depth. approx. 80 cm
height: 148 cm

the machine is cleaned, repainted and tested for function.

delivery or pick up 10 days after checkout.

combined shipping is possible when purchasing multiple items.  FORTUNA AUTOMAT GR. 4 - 30PCS SANDWICH PRESS USED PROFESSIONAL LONG-LASTING ROLL PRESS FOR ROUND AND SQUARE BUNS FROM 85 TO 120 G MECHANICAL HEAD COUNT NEW PAINT JOB ACCESSORIES: 2 WORK PLATE TECHNICAL DATA: MANUFACTURER: SCHR&ATILDE;&PARA;DER, STAFFELSTEIN TYPE: FORTUNA AUTOMAT GR. 4 380 V 50 HZ THE MACHINE HAS NO NAMEPLATE. DIMENSIONS: WIDTH: 75 CM DEPTH. APPROX. 80 CM HEIGHT: 148 CM THE MACHINE IS CLEANED, REPAINTED AND TESTED FOR FUNCTION. DELIVERY OR PICK UP 10 DAYS AFTER CHECKOUT. COMBINED SHIPPING IS POSSIBLE WHEN PURCHASING MULTIPLE ITEMS.
Vendedor: AY-BACK Technik Bäckerei & Gastronomiemaschinen
Año de construcción: usado
Ubicación: Land-looking for complete resolution of the bakery or individual machines
mixers (kemper diosna)
ovens, sandwich press machines (fortuna gr. 4)
also broken machines!
 LOOKING FOR COMPLETE RESOLUTION OF THE BAKERY OR INDIVIDUAL MACHINES MIXERS (KEMPER DIOSNA) OVENS, SANDWICH PRESS MACHINES (FORTUNA GR. 4) ALSO BROKEN MACHINES!
Vendedor: Bäckereitechnik M.Kaya
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-painting plant with wet spraying wall and drying plant

we bought a carpentry few years ago, until then the paint shop was used repeatedly by the company.
however, we do not use the company as a carpentry but as a warehouse and urgently need the space.
therefore, we would like to sell the system quickly for a very reasonable price.

unfortunately, we have only limited data available:
1) manufacturer fa. hurrican
2) the system consists of:
   a. a wet spray wall approx. 2900 long and 2200mm high type fwk-b 3/1/1
   b. lateral walls / doors for the wet spray wall available
   c. sump with circulation pump and grate cover
   d. exhaust air system 9500m³ / h / or 4750m³ / h
   e. supply air unit zla100 1000m³ / h or 5000m³ / h
   f.  heating for the drying room
   g. heating by means of hot water via the central heating.
   h. rectangular tube channel for the drying plant
   i.   control cabinet
3) special price € 1,800 excl. vat
4) removal by the customer with the help of the seller
5) settlement very urgent, dismantling can be started immediately after agreement.
6) in the attachment we have 2 pages with data from the approval procedure  PAINTING PLANT WITH WET SPRAYING WALL AND DRYING PLANT WE BOUGHT A CARPENTRY FEW YEARS AGO, UNTIL THEN THE PAINT SHOP WAS USED REPEATEDLY BY THE COMPANY. HOWEVER, WE DO NOT USE THE COMPANY AS A CARPENTRY BUT AS A WAREHOUSE AND URGENTLY NEED THE SPACE. THEREFORE, WE WOULD LIKE TO SELL THE SYSTEM QUICKLY FOR A VERY REASONABLE PRICE. UNFORTUNATELY, WE HAVE ONLY LIMITED DATA AVAILABLE: 1) MANUFACTURER FA. HURRICAN 2) THE SYSTEM CONSISTS OF: A. A WET SPRAY WALL APPROX. 2900 LONG AND 2200MM HIGH TYPE FWK-B 3/1/1 B. LATERAL WALLS / DOORS FOR THE WET SPRAY WALL AVAILABLE C. SUMP WITH CIRCULATION PUMP AND GRATE COVER D. EXHAUST AIR SYSTEM 9500M³ / H / OR 4750M³ / H E. SUPPLY AIR UNIT ZLA100 1000M³ / H OR 5000M³ / H F. HEATING FOR THE DRYING ROOM G. HEATING BY MEANS OF HOT WATER VIA THE CENTRAL HEATING. H. RECTANGULAR TUBE CHANNEL FOR THE DRYING PLANT I. CONTROL CABINET 3) SPECIAL PRICE € 1,800 EXCL. VAT 4) REMOVAL BY THE CUSTOMER WITH THE HELP OF THE SELLER 5) SETTLEMENT VERY URGENT, DISMANTLING CAN BE STARTED IMMEDIATELY AFTER AGREEMENT. 6) IN THE ATTACHMENT WE HAVE 2 PAGES WITH DATA FROM THE APPROVAL PROCEDURE
Vendedor: IPV GmbH
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine

make: schrã?der

model: fortuna a-3 slot 30-piece set

with 3 new casting plates

-top obsolete

-with warranty

-delivery: free house within germany DOUGH DIVIDING AND MOULDING MACHINE MAKE: SCHR&ATILDE;?DER MODEL: FORTUNA A-3 SLOT 30-PIECE SET WITH 3 NEW CASTING PLATES -TOP OBSOLETE -WITH WARRANTY -DELIVERY: FREE HOUSE WITHIN GERMANY
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Ubicación: Land-we have one mitsubishi 16zylinder engine in used condition to sell. the engine looks like it never runs. unfortunately, a cylinder head is missing. therefore, the engine is for export or dealer ore export under exclusion of warranty. you can use it for sparepart delivery or refurbish.

data:
manufacturer: mitsubishi heavy industries
year of construction: 2004
power: 916.2kw
turning speed: 1500 1/min
bore diameter 170/180 mm
gas pressure: min. 350kpa max 800kpa * 1
fuel: natural gas


    WE HAVE ONE MITSUBISHI 16ZYLINDER ENGINE IN USED CONDITION TO SELL. THE ENGINE LOOKS LIKE IT NEVER RUNS. UNFORTUNATELY, A CYLINDER HEAD IS MISSING. THEREFORE, THE ENGINE IS FOR EXPORT OR DEALER ORE EXPORT UNDER EXCLUSION OF WARRANTY. YOU CAN USE IT FOR SPAREPART DELIVERY OR REFURBISH. DATA: MANUFACTURER: MITSUBISHI HEAVY INDUSTRIES YEAR OF CONSTRUCTION: 2004 POWER: 916.2KW TURNING SPEED: 1500 1/MIN BORE DIAMETER 170/180 MM GAS PRESSURE: MIN. 350KPA MAX 800KPA * 1 FUEL: NATURAL GAS
Vendedor: EUROTECHNIK Dittrich GmbH
Año de construcción: usado
Ubicación: Land-it is a used, reconditioned fortuna bun press gr. 3 (semiautomatic, 30-teilig) for sale. the sandwich press is fully functional in top condition, and runs very quietly. a new blade star was installed, no visible wear. the motor has been stored new and built a new main switch. the machine has been repainted. the weight of the machine is 32gr. -70gr. each piece of dough (30-teilig). dough should be just pressed and cut a higher weight range is possible.
incl. 3 x effect plates (active panels more upon request).
height: 1350mm, width: 580mm, depth: 580mm, weight: 330kg
power: approx. 0,74 kw

price on request. IT IS A USED, RECONDITIONED FORTUNA BUN PRESS GR. 3 (SEMIAUTOMATIC, 30-TEILIG) FOR SALE. THE SANDWICH PRESS IS FULLY FUNCTIONAL IN TOP CONDITION, AND RUNS VERY QUIETLY. A NEW BLADE STAR WAS INSTALLED, NO VISIBLE WEAR. THE MOTOR HAS BEEN STORED NEW AND BUILT A NEW MAIN SWITCH. THE MACHINE HAS BEEN REPAINTED. THE WEIGHT OF THE MACHINE IS 32GR. -70GR. EACH PIECE OF DOUGH (30-TEILIG). DOUGH SHOULD BE JUST PRESSED AND CUT A HIGHER WEIGHT RANGE IS POSSIBLE. INCL. 3 X EFFECT PLATES (ACTIVE PANELS MORE UPON REQUEST). HEIGHT: 1350MM, WIDTH: 580MM, DEPTH: 580MM, WEIGHT: 330KG POWER: APPROX. 0,74 KW PRICE ON REQUEST.
Vendedor: Pick Bäckereimaschinenhandel
Año de construcción: usado
Precio: 1.190 €
Ubicación: Land-mobile hydraulic unit - used
manufacturer: log hydraulics gmbh

technical specifications:
- the design data of the unit are unfortunately not available.
- the hydraulic unit is mounted on a trolley with wheels,
- one hydac 5 liter nitrogen bottle incl. connection unit,
- one hydac 20 liter nitrogen bottle incl. connection unit,
- tank with about 200 liters volume for the hydraulic oil,
- 2 presettable pressure circuits,
- drive motor for the hydraulic pump elmot schäfer, 15 kw, 400 v,

length 1700 mm, width 600 mm, height 1550 mm, weight approx. 400 kg,

condition: used, the aggregate was according to the previous owner until last in operation. since the oil was left out to transport the unit, we could not test the function. if the engine is proven not to work, we will refund € 300. the pressure gauges should be renewed. otherwise we can not accept any guaranties or warranties for used equipment.   MOBILE HYDRAULIC UNIT - USED MANUFACTURER: LOG HYDRAULICS GMBH TECHNICAL SPECIFICATIONS: - THE DESIGN DATA OF THE UNIT ARE UNFORTUNATELY NOT AVAILABLE. - THE HYDRAULIC UNIT IS MOUNTED ON A TROLLEY WITH WHEELS, - ONE HYDAC 5 LITER NITROGEN BOTTLE INCL. CONNECTION UNIT, - ONE HYDAC 20 LITER NITROGEN BOTTLE INCL. CONNECTION UNIT, - TANK WITH ABOUT 200 LITERS VOLUME FOR THE HYDRAULIC OIL, - 2 PRESETTABLE PRESSURE CIRCUITS, - DRIVE MOTOR FOR THE HYDRAULIC PUMP ELMOT SCHäFER, 15 KW, 400 V, LENGTH 1700 MM, WIDTH 600 MM, HEIGHT 1550 MM, WEIGHT APPROX. 400 KG, CONDITION: USED, THE AGGREGATE WAS ACCORDING TO THE PREVIOUS OWNER UNTIL LAST IN OPERATION. SINCE THE OIL WAS LEFT OUT TO TRANSPORT THE UNIT, WE COULD NOT TEST THE FUNCTION. IF THE ENGINE IS PROVEN NOT TO WORK, WE WILL REFUND € 300. THE PRESSURE GAUGES SHOULD BE RENEWED. OTHERWISE WE CAN NOT ACCEPT ANY GUARANTIES OR WARRANTIES FOR USED EQUIPMENT.
Vendedor: IPV GmbH
Año de construcción: usado
Precio: 2.605 €
Ubicación: Land-brand: fortuna
type: afb 500

max grinding length 500 mm
min loop 2 mm ã?
max grinding run a 60 mm grind
distance between center 135 mm
mk 2
spindle bore 20 mm
angle 90 â° BRAND: FORTUNA TYPE: AFB 500 MAX GRINDING LENGTH 500 MM MIN LOOP 2 MM &ATILDE;? MAX GRINDING RUN A 60 MM GRIND DISTANCE BETWEEN CENTER 135 MM MK 2 SPINDLE BORE 20 MM ANGLE 90 &ACIRC;&DEG;
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Ubicación: Land-stainless steel execution
4 rows
part overhaul in good condition
weight range 35-80 gram
capacity per hour maximum 4800 pcs. / h
digital control
380v / 50 hz. STAINLESS STEEL EXECUTION 4 ROWS PART OVERHAUL IN GOOD CONDITION WEIGHT RANGE 35-80 GRAM CAPACITY PER HOUR MAXIMUM 4800 PCS. / H DIGITAL CONTROL 380V / 50 HZ.
Vendedor: Güzel Taceddin
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-mainca needed em-25 piston filler
unfortunately no nameplate, device seems to have been built by mainca and sold under benedict
older machine in ordentlischem state
must be before using thoroughly cleaned
two filling tubes, piston spanner and piston extension screw are supplied
housing and cover made of stainless steel
developed video about test run  MAINCA NEEDED EM-25 PISTON FILLER UNFORTUNATELY NO NAMEPLATE, DEVICE SEEMS TO HAVE BEEN BUILT BY MAINCA AND SOLD UNDER BENEDICT OLDER MACHINE IN ORDENTLISCHEM STATE MUST BE BEFORE USING THOROUGHLY CLEANED TWO FILLING TUBES, PISTON SPANNER AND PISTON EXTENSION SCREW ARE SUPPLIED HOUSING AND COVER MADE OF STAINLESS STEEL DEVELOPED VIDEO ABOUT TEST RUN
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-a used bezel for a lathe

max flow: 140 mm
passage height mid: 200 mm
width of the foot until the middle groove: 210 mm
pictures see more dimensions.

unfortunately lacks a leadership role that but simply built to / can be purchased

the bezel has traces of use. (slight rust, scratches)

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED BEZEL FOR A LATHE MAX FLOW: 140 MM PASSAGE HEIGHT MID: 200 MM WIDTH OF THE FOOT UNTIL THE MIDDLE GROOVE: 210 MM PICTURES SEE MORE DIMENSIONS. UNFORTUNATELY LACKS A LEADERSHIP ROLE THAT BUT SIMPLY BUILT TO / CAN BE PURCHASED THE BEZEL HAS TRACES OF USE. (SLIGHT RUST, SCRATCHES) CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-a used electric wet adhesive device.

the device works. two new buttons were installed on the front. start (a + b)
unfortunately, the water container on the page is missing.  



manufacturer: vario taper
type: vt 1500

-desired stripes at your fingertips
-strip length continously variable from 100 mm up to 1500 mm adjustable
-up to 100 mm wide roll
-strip in any length or two preselectable length (a and b)
-strip length a, a-b or a-b-b selectable through integrated repeater system
-donations string between 0 and 24 seconds work time customizable - heating for water tank

the device has traces of use, like quirks, scratches and light wear.

contact person mr. mueller see also our over 200 more deals at.

(changes and errors in the technical data, information
and prices and subject to prior sale!)  A USED ELECTRIC WET ADHESIVE DEVICE. THE DEVICE WORKS. TWO NEW BUTTONS WERE INSTALLED ON THE FRONT. START (A + B) UNFORTUNATELY, THE WATER CONTAINER ON THE PAGE IS MISSING. MANUFACTURER: VARIO TAPER TYPE: VT 1500 -DESIRED STRIPES AT YOUR FINGERTIPS -STRIP LENGTH CONTINOUSLY VARIABLE FROM 100 MM UP TO 1500 MM ADJUSTABLE -UP TO 100 MM WIDE ROLL -STRIP IN ANY LENGTH OR TWO PRESELECTABLE LENGTH (A AND B) -STRIP LENGTH A, A-B OR A-B-B SELECTABLE THROUGH INTEGRATED REPEATER SYSTEM -DONATIONS STRING BETWEEN 0 AND 24 SECONDS WORK TIME CUSTOMIZABLE - HEATING FOR WATER TANK THE DEVICE HAS TRACES OF USE, LIKE QUIRKS, SCRATCHES AND LIGHT WEAR. CONTACT PERSON MR. MUELLER SEE ALSO OUR OVER 200 MORE DEALS AT. (CHANGES AND ERRORS IN THE TECHNICAL DATA, INFORMATION AND PRICES AND SUBJECT TO PRIOR SALE!)
Vendedor: MPS Frank Müller
Año de construcción: usado
Ubicación: Land-dough dividing and knitting machine / head unit model: fortuna km 4

4 rows
weight range from 35 to 80 grams
power max 5300 pieces / hour
spreading belts work direction from left to right
connection 400v,4 kw, 16a-cee plug DOUGH DIVIDING AND KNITTING MACHINE / HEAD UNIT MODEL: FORTUNA KM 4 4 ROWS WEIGHT RANGE FROM 35 TO 80 GRAMS POWER MAX 5300 PIECES / HOUR SPREADING BELTS WORK DIRECTION FROM LEFT TO RIGHT CONNECTION 400V,4 KW, 16A-CEE PLUG
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-edge grinder, edge sander, belt sander
motor output 3kw / 380(400) volt
strap length: 260-265 cm
unfortunately no nameplate available

EDGE GRINDER, EDGE SANDER, BELT SANDER MOTOR OUTPUT 3KW / 380(400) VOLT STRAP LENGTH: 260-265 CM UNFORTUNATELY NO NAMEPLATE AVAILABLE
Vendedor: Ralph Rosenthal Maschinenlager
Año de construcción: usado
Ubicación: Land-fritsch multi twist pretz-/ stick plant

year of construction 2006
    complete stainless 
    1 row
    power approx. 2,000 pretzels and sticks per hour
    pretzel weight about 60 - 100 gr
    length approx. 250-600 mm

composed of:

fortuna head machine
year of construction 2003
4 rows
weight ranges 40 - 100gr

fortuna pre-proofer type ge 8-2k

conveyor belt centering and flattening unit type zfde 300 table wide 300 mm 
belt wide 250 mm speed 4 m/min 

winder type bsm 
adjustable roller gap 0,5 – 20mm 

long molder type lw 500/900 
length after first step (w1): max. 400 mm 
lenth after second step (w2): max. 750 mm 

conveyor belt with blower
 
pretzel looper type ssb 700-600 
table wide 700 mm weight 60-100 g 
- incl. twisting tool for pretzel  

tray depositor 

the system is ex stock rottenburg available!  FRITSCH MULTI TWIST PRETZ-/ STICK PLANT YEAR OF CONSTRUCTION 2006 COMPLETE STAINLESS 1 ROW POWER APPROX. 2,000 PRETZELS AND STICKS PER HOUR PRETZEL WEIGHT ABOUT 60 - 100 GR LENGTH APPROX. 250-600 MM COMPOSED OF: FORTUNA HEAD MACHINE YEAR OF CONSTRUCTION 2003 4 ROWS WEIGHT RANGES 40 - 100GR FORTUNA PRE-PROOFER TYPE GE 8-2K CONVEYOR BELT CENTERING AND FLATTENING UNIT TYPE ZFDE 300 TABLE WIDE 300 MM BELT WIDE 250 MM SPEED 4 M/MIN WINDER TYPE BSM ADJUSTABLE ROLLER GAP 0,5 – 20MM LONG MOLDER TYPE LW 500/900 LENGTH AFTER FIRST STEP (W1): MAX. 400 MM LENTH AFTER SECOND STEP (W2): MAX. 750 MM CONVEYOR BELT WITH BLOWER PRETZEL LOOPER TYPE SSB 700-600 TABLE WIDE 700 MM WEIGHT 60-100 G - INCL. TWISTING TOOL FOR PRETZEL TRAY DEPOSITOR THE SYSTEM IS EX STOCK ROTTENBURG AVAILABLE!
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine
sandwich press new top model
fortuna automat gr. 3 +
with active switch-off
head cleaning to the rear electric
newly revised head of part of
dough deposit up to 2400 g
with 3 new casting plates
roll press brake and chassis
e system new
checked dguv v3
connection 400v, 16a-cee plug
reconditioned second-hand machine with 6 months warranty DOUGH DIVIDING AND MOULDING MACHINE SANDWICH PRESS NEW TOP MODEL FORTUNA AUTOMAT GR. 3 + WITH ACTIVE SWITCH-OFF HEAD CLEANING TO THE REAR ELECTRIC NEWLY REVISED HEAD OF PART OF DOUGH DEPOSIT UP TO 2400 G WITH 3 NEW CASTING PLATES ROLL PRESS BRAKE AND CHASSIS E SYSTEM NEW CHECKED DGUV V3 CONNECTION 400V, 16A-CEE PLUG RECONDITIONED SECOND-HAND MACHINE WITH 6 MONTHS WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-kã¶vy brã¶tchen plant with fortuna head machine

type: km
    6 rows
    hour performance formerly 6,000 pieces per hour
    weight range: 40-90 grams

K&ATILDE;&PARA;VY BR&ATILDE;&PARA;TCHEN PLANT WITH FORTUNA HEAD MACHINE TYPE: KM 6 ROWS HOUR PERFORMANCE FORMERLY 6,000 PIECES PER HOUR WEIGHT RANGE: 40-90 GRAMS
Vendedor: Backservice Gaux GmbH
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine
sandwich press new model
fortuna automat gr. 3 +
with active switch-off
head cleaning to the rear electric

dough deposit up to 2400 g
with 3 active plate
checked dguv v3
connection 400v, 16a-cee plug
reconditioned second-hand machine with 6 months warranty DOUGH DIVIDING AND MOULDING MACHINE SANDWICH PRESS NEW MODEL FORTUNA AUTOMAT GR. 3 + WITH ACTIVE SWITCH-OFF HEAD CLEANING TO THE REAR ELECTRIC DOUGH DEPOSIT UP TO 2400 G WITH 3 ACTIVE PLATE CHECKED DGUV V3 CONNECTION 400V, 16A-CEE PLUG RECONDITIONED SECOND-HAND MACHINE WITH 6 MONTHS WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine
sandwich press new model
fortuna automat gr. 3 +
with active switch-off
head cleaning to the rear
newly revised head of part of
dough deposit up to 2500 g
rewind button
with 3 new casting plates
e system new
checked dguv v3
connection 400v, 16a-cee plug
reconditioned second-hand machine
with 6 months warranty DOUGH DIVIDING AND MOULDING MACHINE SANDWICH PRESS NEW MODEL FORTUNA AUTOMAT GR. 3 + WITH ACTIVE SWITCH-OFF HEAD CLEANING TO THE REAR NEWLY REVISED HEAD OF PART OF DOUGH DEPOSIT UP TO 2500 G REWIND BUTTON WITH 3 NEW CASTING PLATES E SYSTEM NEW CHECKED DGUV V3 CONNECTION 400V, 16A-CEE PLUG RECONDITIONED SECOND-HAND MACHINE WITH 6 MONTHS WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine
fortuna bun press gr. 4 semi automatic 30-teilig
pasta insert 1200 up to 3300 g, pieces from 40 to 110 g
newly revised head of part of
with 3 new casting plates
e system newly tested dguv v3
connection 400v, 16a-cee plug

reconditioned second-hand machine
with 6 months warranty DOUGH DIVIDING AND MOULDING MACHINE FORTUNA BUN PRESS GR. 4 SEMI AUTOMATIC 30-TEILIG PASTA INSERT 1200 UP TO 3300 G, PIECES FROM 40 TO 110 G NEWLY REVISED HEAD OF PART OF WITH 3 NEW CASTING PLATES E SYSTEM NEWLY TESTED DGUV V3 CONNECTION 400V, 16A-CEE PLUG RECONDITIONED SECOND-HAND MACHINE WITH 6 MONTHS WARRANTY
Vendedor: Milbrandt GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)