9 ofertas

Año de construcción: usado
Ubicación: Land-francis shaw ko intermix  
year: jan 1987
approx. mixing capacity 1.8 litres
mawdsley dc motor, shunt wound, serial no. 180t827, 30kw, 460 volts, 74 amps, 1800rpm, continuous rating
apex denison hydraulic pump
holroyd gearbox
barco rotary joints
fortress interlock system
water steam inlet
water steam drain
mixing chamber 
rotors
plunger
drop door
grease points
with hopper
thorn emi electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, november 1987
operator panel consisting of rotor speed, main motor current process timer, mix temperature
complete with control panel FRANCIS SHAW KO INTERMIX YEAR: JAN 1987 APPROX. MIXING CAPACITY 1.8 LITRES MAWDSLEY DC MOTOR, SHUNT WOUND, SERIAL NO. 180T827, 30KW, 460 VOLTS, 74 AMPS, 1800RPM, CONTINUOUS RATING APEX DENISON HYDRAULIC PUMP HOLROYD GEARBOX BARCO ROTARY JOINTS FORTRESS INTERLOCK SYSTEM WATER STEAM INLET WATER STEAM DRAIN MIXING CHAMBER ROTORS PLUNGER DROP DOOR GREASE POINTS WITH HOPPER THORN EMI ELECTRONIC STAR DRIVE; 415 VOLTS, 3 WIRE, 50 CYCLES, 54KVA, NOVEMBER 1987 OPERATOR PANEL CONSISTING OF ROTOR SPEED, MAIN MOTOR CURRENT PROCESS TIMER, MIX TEMPERATURE COMPLETE WITH CONTROL PANEL
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-francis shaw rotorcure 
main drum diameter : 60” / 1524mm
main drum width : 1575mm
bottom drum width : 1530mm
top drum width : 1525mm
pressure drum width : 1525mm
ss belt width : 1430mm
belt thick : 1.8mm
for 2-3mm up to 20mm thick sheet
steel belt
make : francis shaw
heaters type : electrical heater
quantity : 3 set x 4nos
heater capacity : 1.6kweach
motor hp : 35hp
aproximateweight : 80 tons
with winder let off
status : working condition
 FRANCIS SHAW ROTORCURE MAIN DRUM DIAMETER : 60” / 1524MM MAIN DRUM WIDTH : 1575MM BOTTOM DRUM WIDTH : 1530MM TOP DRUM WIDTH : 1525MM PRESSURE DRUM WIDTH : 1525MM SS BELT WIDTH : 1430MM BELT THICK : 1.8MM FOR 2-3MM UP TO 20MM THICK SHEET STEEL BELT MAKE : FRANCIS SHAW HEATERS TYPE : ELECTRICAL HEATER QUANTITY : 3 SET X 4NOS HEATER CAPACITY : 1.6KWEACH MOTOR HP : 35HP APROXIMATEWEIGHT : 80 TONS WITH WINDER LET OFF STATUS : WORKING CONDITION
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-francis shaw pin barrel extruder
screw diam. 90mm
ld ratio 16:1
roller feed
barrel jacked / pinned
clamp swing bolt
dc drive motor
63kw
1750rpm
45volts, 3 phase, 50 cycles
complete with panel and 4 x temperature control units FRANCIS SHAW PIN BARREL EXTRUDER SCREW DIAM. 90MM LD RATIO 16:1 ROLLER FEED BARREL JACKED / PINNED CLAMP SWING BOLT DC DRIVE MOTOR 63KW 1750RPM 45VOLTS, 3 PHASE, 50 CYCLES COMPLETE WITH PANEL AND 4 X TEMPERATURE CONTROL UNITS
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-1 x francis shaw model k1 intermix mk4,
m/c number: 4176, date: jan 1991, 
net chamber volume: 5.5litres,
nr2 style intermeshing rotors,
pneumatic hopper,
hydraulic drop door discharge,
with thrigge scott 45kw dc variable speed motor.
2 x tool temp temperature control units.
the mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  all other components checked, serviced or replaced during re-assembly.  the mixer will be supplied with new control panel with plc, touch screen pc with data capture. 1 X FRANCIS SHAW MODEL K1 INTERMIX MK4, M/C NUMBER: 4176, DATE: JAN 1991, NET CHAMBER VOLUME: 5.5LITRES, NR2 STYLE INTERMESHING ROTORS, PNEUMATIC HOPPER, HYDRAULIC DROP DOOR DISCHARGE, WITH THRIGGE SCOTT 45KW DC VARIABLE SPEED MOTOR. 2 X TOOL TEMP TEMPERATURE CONTROL UNITS. THE MIXER HAS BEEN COMPLETELY DISMANTLED AND THE ROTORS, DOOR TOP, DRILLED SIDES AND FLOATING WEIGHT HAVE BEEN REFURBISHED AND RE-CHROMED.  ALL OTHER COMPONENTS CHECKED, SERVICED OR REPLACED DURING RE-ASSEMBLY.  THE MIXER WILL BE SUPPLIED WITH NEW CONTROL PANEL WITH PLC, TOUCH SCREEN PC WITH DATA CAPTURE.
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-1 x francis shaw model k7 mk5 intermix,
contract no. 1443, date: 22.1.98 (year 1998),
nr5 rotors,
net chamber volume 310litres,
batch size: 217kgs,
hydraulic drop door with linear actuator,
hydraulic hopper,
francis shaw unidrive gearbox:
order no. g590304, kw rating 1300,
output 46.45 rpm, ratio 25.834/1,
2 x 700kw, 1250rpm dc motors, 3ph, 660v, 50hz.
the mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (can all be quoted if required).
full manuals/drawings available.
available: immediately (ex stock uk). 1 X FRANCIS SHAW MODEL K7 MK5 INTERMIX, CONTRACT NO. 1443, DATE: 22.1.98 (YEAR 1998), NR5 ROTORS, NET CHAMBER VOLUME 310LITRES, BATCH SIZE: 217KGS, HYDRAULIC DROP DOOR WITH LINEAR ACTUATOR, HYDRAULIC HOPPER, FRANCIS SHAW UNIDRIVE GEARBOX: ORDER NO. G590304, KW RATING 1300, OUTPUT 46.45 RPM, RATIO 25.834/1, 2 X 700KW, 1250RPM DC MOTORS, 3PH, 660V, 50HZ. THE MIXER IS IN SERVICEABLE CONDITION, BUT IS WITHOUT ELECTRICAL DRIVES/OPERATOR CONTROLS, HYDRAULIC UNIT OR LUBRICATION UNIT (CAN ALL BE QUOTED IF REQUIRED). FULL MANUALS/DRAWINGS AVAILABLE. AVAILABLE: IMMEDIATELY (EX STOCK UK).
Vendedor: Euro Rubber Lines
Año de construcción: usado
Ubicación: Land-internal mixer - used
work batch capacity:		50 liter
pneumatic hopper
hydraulic drop door	
lubrication: central
water cooling: of drop door, upper ram, rotors and chamber
dc motor: 275 kw, 460 v, 1158 rpm, brand enco - france	
speed input: 980/490 rpm
speed output: 34/17 rpm
total weight: 17000 kg
complete set of original documents available

   INTERNAL MIXER - USED WORK BATCH CAPACITY: 50 LITER PNEUMATIC HOPPER HYDRAULIC DROP DOOR LUBRICATION: CENTRAL WATER COOLING: OF DROP DOOR, UPPER RAM, ROTORS AND CHAMBER DC MOTOR: 275 KW, 460 V, 1158 RPM, BRAND ENCO - FRANCE SPEED INPUT: 980/490 RPM SPEED OUTPUT: 34/17 RPM TOTAL WEIGHT: 17000 KG COMPLETE SET OF ORIGINAL DOCUMENTS AVAILABLE
Vendedor: USD Gebrauchtmaschinen GmbH
Año de construcción: usado
Ubicación: Land-intermix mixer k-5

yom: 1987, start up 1989
type: k-5, chamber mk-4, rotors nr 2
volume: 92l
hopper: pneumatic
gear box: jahnel, 720kw
engine: ansaldo, dc, 784kw

 INTERMIX MIXER K-5 YOM: 1987, START UP 1989 TYPE: K-5, CHAMBER MK-4, ROTORS NR 2 VOLUME: 92L HOPPER: PNEUMATIC GEAR BOX: JAHNEL, 720KW ENGINE: ANSALDO, DC, 784KW
Vendedor: Pelmar Engineering Germany GmbH
Año de construcción: usado
Ubicación: Land-francis shaw extruder
screw diam. 100mm (4?)
ld ratio 10:1
roller feed
brush dc motor
100hp motor 
1500rpm
460 volts
variable speed drive
complete with control panel
       FRANCIS SHAW EXTRUDER SCREW DIAM. 100MM (4?) LD RATIO 10:1 ROLLER FEED BRUSH DC MOTOR 100HP MOTOR 1500RPM 460 VOLTS VARIABLE SPEED DRIVE COMPLETE WITH CONTROL PANEL
Vendedor: Andrew Isaacs Machinery International Ltd
Año de construcción: usado
Ubicación: Land-k2a francis shaw mixer 
unidrive
drop door
complete with 220 hp motor
with control panel
lubrication pump
francis shaw gearbox
complete with electrical control panel, grease pump and associated parts
       K2A FRANCIS SHAW MIXER UNIDRIVE DROP DOOR COMPLETE WITH 220 HP MOTOR WITH CONTROL PANEL LUBRICATION PUMP FRANCIS SHAW GEARBOX COMPLETE WITH ELECTRICAL CONTROL PANEL, GREASE PUMP AND ASSOCIATED PARTS
Vendedor: Andrew Isaacs Machinery International Ltd
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FRANCIS types: