3222 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-max. pressure: 54 tons 	
year of production: 2004
unit pressure: 5.62 kg/cm² 	
productivity: 2 bale/h.
bale dimensions: 1200x800x1200 mm 	
price: 	to inquiry
bale weight: ca. 500 kg 	  	 
supply: 400 v/ 7,5 kw 	  	 

binding only with wire

the machine is fully operational and after service.

englisch - ewelina pekala +48 696 072 985
deutsch - ewelina pekala +48 696 072 985
polnisch – ryszard £uba +48 501 330 786
russisch – alina hykava +48 795 135 939  MAX. PRESSURE: 54 TONS YEAR OF PRODUCTION: 2004 UNIT PRESSURE: 5.62 KG/CM² PRODUCTIVITY: 2 BALE/H. BALE DIMENSIONS: 1200X800X1200 MM PRICE: TO INQUIRY BALE WEIGHT: CA. 500 KG SUPPLY: 400 V/ 7,5 KW BINDING ONLY WITH WIRE THE MACHINE IS FULLY OPERATIONAL AND AFTER SERVICE. ENGLISCH - EWELINA PEKALA +48 696 072 985 DEUTSCH - EWELINA PEKALA +48 696 072 985 POLNISCH – RYSZARD £UBA +48 501 330 786 RUSSISCH – ALINA HYKAVA +48 795 135 939
Vendedor: ARTechnic
Año de construcción: usado
Ubicación: Land-<span style=color: #ff0000;><span style=caret-color: #ff0000;><b>about 20000 working hours. </b></span></span>

<span style=color: #ff0000;><span style=caret-color: #ff0000;><b>machine working. exchange due to new purchase. dismounted and ready to be delivered.</b></span></span>

 

x-axis travel (mm):
x-axis travel (mm):
x-axis travel (mm):
worktank length:
worktank width:
worktank height:
max. workpiece length:
max. workpiece width:
max. workpiece height:
max. workpiece weight:
taper angle/height:
automatic wire feeding:
length x width x height:
weight (kg):
worked power hours:

<em>the technical data and illustrations are not binding. they are not warranted characteristics and are subject to change.</em> ABOUT 20000 WORKING HOURS. MACHINE WORKING. EXCHANGE DUE TO NEW PURCHASE. DISMOUNTED AND READY TO BE DELIVERED. &NBSP; X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): X-AXIS TRAVEL (MM): WORKTANK LENGTH: WORKTANK WIDTH: WORKTANK HEIGHT: MAX. WORKPIECE LENGTH: MAX. WORKPIECE WIDTH: MAX. WORKPIECE HEIGHT: MAX. WORKPIECE WEIGHT: TAPER ANGLE/HEIGHT: AUTOMATIC WIRE FEEDING: LENGTH X WIDTH X HEIGHT: WEIGHT (KG): WORKED POWER HOURS: THE TECHNICAL DATA AND ILLUSTRATIONS ARE NOT BINDING. THEY ARE NOT WARRANTED CHARACTERISTICS AND ARE SUBJECT TO CHANGE.
Vendedor: ibeXtra Sàrl
Año de construcción: usado
Precio: 130.000 €
Ubicación: Land-
-year 2007, five colours straight machine, maximum printing size is 600x750 mms.
-model oliver 75 sd ,can print carton up to 6 micron

technical details:
-max. paper size: 770x600 mms
-image area: 765x585 mms
-plate size: 770 x 660 mms
-speed max: 15.000 sheets/hour
-counter: 42 mio copies

-densitometer in line with sakurai colour console with qss and sis register system
-sakurai auto-plate change system with olivermatic dampening
-new aquapress refrigeration system, all washing devices
-ir dryer, double size impression cylinders
-set of new rollers, all manuals and accessories
-any print test possible, damages free
 -YEAR 2007, FIVE COLOURS STRAIGHT MACHINE, MAXIMUM PRINTING SIZE IS 600X750 MMS. -MODEL OLIVER 75 SD ,CAN PRINT CARTON UP TO 6 MICRON TECHNICAL DETAILS: -MAX. PAPER SIZE: 770X600 MMS -IMAGE AREA: 765X585 MMS -PLATE SIZE: 770 X 660 MMS -SPEED MAX: 15.000 SHEETS/HOUR -COUNTER: 42 MIO COPIES -DENSITOMETER IN LINE WITH SAKURAI COLOUR CONSOLE WITH QSS AND SIS REGISTER SYSTEM -SAKURAI AUTO-PLATE CHANGE SYSTEM WITH OLIVERMATIC DAMPENING -NEW AQUAPRESS REFRIGERATION SYSTEM, ALL WASHING DEVICES -IR DRYER, DOUBLE SIZE IMPRESSION CYLINDERS -SET OF NEW ROLLERS, ALL MANUALS AND ACCESSORIES -ANY PRINT TEST POSSIBLE, DAMAGES FREE
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Precio: 24.950 EU€
Ubicación: Land-round balers are designed for bales of grass or hay. the picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. complete machine in good condition. ROUND BALERS ARE DESIGNED FOR BALES OF GRASS OR HAY. THE PICKING OF THE SPOIL TAKES PLACE FROM THE SWATH WITH A PICK-UP AND THE MACHINE IS DRIVEN FROM THE FARM TRACTOR VIA A POWER TAKE-OFF. COMPLETE MACHINE IN GOOD CONDITION.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum tx units
 
the machine was installed in year 2007 and its currently in very good operational condition. the capacity is 72 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has heuft pilot cd manuals in english
 
this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.
 
sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.
 
the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.
 
this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.
 
technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft spectrum tx inline ebi with reflexx image processing and heuft syncron system
capacity: 72 000 bph
reliability: 99.9 % detection complete heuft manuals in english. EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM TX UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION. THE CAPACITY IS 72 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS HEUFT PILOT CD MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT SPECTRUM TX INLINE EBI WITH REFLEXX IMAGE PROCESSING AND HEUFT SYNCRON SYSTEM CAPACITY: 72 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH.
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 33.000 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-ammonia liquid chiller gea grasso vp 1300
 
capacity control
all screw compressors used in the package series are
fitted with a continuous capacity control with a range
of 10 - 100%.
the capacity is adjusted by shortening the compressor
stroke. the defining factor for the compression
process is the effective rotor length; this is altered by
a hydraulically operated control slide (mounted below
the rotors).
as a standard, each grasso liquid chiller fx pp, lp, vp comprises a low-voltage switchgear installation (ip54) with
integral freely programmable logic controller (plc) gsc. the software functions and the assignment of
inputs/outputs of the gsc control are described separately.
the standard scope of delivery for the low-voltage switchgear installation for liquid
chillers fx comprises:
 
• main switch (load break cut-out)
• star/delta combination for drive motor
• motor fuse
• motor current transformer
• motor winding protector
• plc hardware
• oil pump contactor
• control transformer with double control fuse on primary and
secondary side
• 24 v dc current supply
• emergency off button
• signal lamp - compressor running
• signal lamp — fault
• signal lamp - warning AMMONIA LIQUID CHILLER GEA GRASSO VP 1300 CAPACITY CONTROL ALL SCREW COMPRESSORS USED IN THE PACKAGE SERIES ARE FITTED WITH A CONTINUOUS CAPACITY CONTROL WITH A RANGE OF 10 - 100%. THE CAPACITY IS ADJUSTED BY SHORTENING THE COMPRESSOR STROKE. THE DEFINING FACTOR FOR THE COMPRESSION PROCESS IS THE EFFECTIVE ROTOR LENGTH; THIS IS ALTERED BY A HYDRAULICALLY OPERATED CONTROL SLIDE (MOUNTED BELOW THE ROTORS). AS A STANDARD, EACH GRASSO LIQUID CHILLER FX PP, LP, VP COMPRISES A LOW-VOLTAGE SWITCHGEAR INSTALLATION (IP54) WITH INTEGRAL FREELY PROGRAMMABLE LOGIC CONTROLLER (PLC) GSC. THE SOFTWARE FUNCTIONS AND THE ASSIGNMENT OF INPUTS/OUTPUTS OF THE GSC CONTROL ARE DESCRIBED SEPARATELY. THE STANDARD SCOPE OF DELIVERY FOR THE LOW-VOLTAGE SWITCHGEAR INSTALLATION FOR LIQUID CHILLERS FX COMPRISES: • MAIN SWITCH (LOAD BREAK CUT-OUT) • STAR/DELTA COMBINATION FOR DRIVE MOTOR • MOTOR FUSE • MOTOR CURRENT TRANSFORMER • MOTOR WINDING PROTECTOR • PLC HARDWARE • OIL PUMP CONTACTOR • CONTROL TRANSFORMER WITH DOUBLE CONTROL FUSE ON PRIMARY AND SECONDARY SIDE • 24 V DC CURRENT SUPPLY • EMERGENCY OFF BUTTON • SIGNAL LAMP - COMPRESSOR RUNNING • SIGNAL LAMP — FAULT • SIGNAL LAMP - WARNING
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make hubbes, no 409, dissolver (1x), double shaft , material stainless steel , shaft length ± 350mm, disc diameter 3x dia. 125mm, manhole dia. 160mm, with scraper , motor 5,0 kw, 380 volt (ex), with variable speed drive , speed mixing shaft 264-1580 rpm, working pressure 0,48 bar, with pans (1x), pan material stainless steel , capacity 50 ltr, pan sizes dia. 480x400mm, outlet dia. 80mm, with jacket (4 ltr), working pressure 0,48 bar, with switch , floorspace 2,1x0,7 m, total height 1,9 mdissolversmixers > dissolvers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE HUBBES, NO 409, DISSOLVER (1X), DOUBLE SHAFT , MATERIAL STAINLESS STEEL , SHAFT LENGTH ± 350MM, DISC DIAMETER 3X DIA. 125MM, MANHOLE DIA. 160MM, WITH SCRAPER , MOTOR 5,0 KW, 380 VOLT (EX), WITH VARIABLE SPEED DRIVE , SPEED MIXING SHAFT 264-1580 RPM, WORKING PRESSURE 0,48 BAR, WITH PANS (1X), PAN MATERIAL STAINLESS STEEL , CAPACITY 50 LTR, PAN SIZES DIA. 480X400MM, OUTLET DIA. 80MM, WITH JACKET (4 LTR), WORKING PRESSURE 0,48 BAR, WITH SWITCH , FLOORSPACE 2,1X0,7 M, TOTAL HEIGHT 1,9 MDISSOLVERSMIXERS > DISSOLVERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-refrigeration screw compressor duopack sab 128 hf - 750 kw

this is a chiller package made by sabroe denmark in 2002, cooling capacity 750 kw, adjustable for 10-100% load. the package consist of two separate liquid cooling screw compressors type sab 128 hf (duopack) with their own electric motor, both operating with r22 refrigerant. units are built on a common base frame with an integrated horizontally mounted common oil separator, oil circulation pump, oil filter, suction- discharge- and safety valves. unit has local control unit unisab iii system. unit was dismantled in year 2014 and is ready for immediate shipment

lubrication oil of the refrigeration compressor is fed to the compressors during the compression process for lubrication, sealing, noise reduction and to remove some of the heat of compression. after the compression process, the oil is separated from the refrigerant in the oil separator. the refrigerant-oil mixture is led into the lower part of the vertical oil separator. there, the first step of oil separation is performed by a combined agglomerator/ demister. the lower part of the oil separator is also used as an oil receiver. the fine separation of the aerosol-type oil portion from the refrigerant is carried out in the upper part of the oil separator by means of coalescing cartridges. the oil separated in the fine section of the oil separator is returned to the compressors suction side via an additional injection orifice.

technical data
manufacturer: york sabroe denmark
manufacturing year: 2002
compressor type: sab 128 hf (duopack)
refrigerant: r 22
cooling capacity: 2 x 379 kw ( 0 /+40c)
swept volume: 2 x 454 m3/h
electric drives (compressor): 2 x 110 kw - 400/690 v 50hz (also suitable for 60hz)
control system: unisab iii REFRIGERATION SCREW COMPRESSOR DUOPACK SAB 128 HF - 750 KW THIS IS A CHILLER PACKAGE MADE BY SABROE DENMARK IN 2002, COOLING CAPACITY 750 KW, ADJUSTABLE FOR 10-100% LOAD. THE PACKAGE CONSIST OF TWO SEPARATE LIQUID COOLING SCREW COMPRESSORS TYPE SAB 128 HF (DUOPACK) WITH THEIR OWN ELECTRIC MOTOR, BOTH OPERATING WITH R22 REFRIGERANT. UNITS ARE BUILT ON A COMMON BASE FRAME WITH AN INTEGRATED HORIZONTALLY MOUNTED COMMON OIL SEPARATOR, OIL CIRCULATION PUMP, OIL FILTER, SUCTION- DISCHARGE- AND SAFETY VALVES. UNIT HAS LOCAL CONTROL UNIT UNISAB III SYSTEM. UNIT WAS DISMANTLED IN YEAR 2014 AND IS READY FOR IMMEDIATE SHIPMENT LUBRICATION OIL OF THE REFRIGERATION COMPRESSOR IS FED TO THE COMPRESSORS DURING THE COMPRESSION PROCESS FOR LUBRICATION, SEALING, NOISE REDUCTION AND TO REMOVE SOME OF THE HEAT OF COMPRESSION. AFTER THE COMPRESSION PROCESS, THE OIL IS SEPARATED FROM THE REFRIGERANT IN THE OIL SEPARATOR. THE REFRIGERANT-OIL MIXTURE IS LED INTO THE LOWER PART OF THE VERTICAL OIL SEPARATOR. THERE, THE FIRST STEP OF OIL SEPARATION IS PERFORMED BY A COMBINED AGGLOMERATOR/ DEMISTER. THE LOWER PART OF THE OIL SEPARATOR IS ALSO USED AS AN OIL RECEIVER. THE FINE SEPARATION OF THE AEROSOL-TYPE OIL PORTION FROM THE REFRIGERANT IS CARRIED OUT IN THE UPPER PART OF THE OIL SEPARATOR BY MEANS OF COALESCING CARTRIDGES. THE OIL SEPARATED IN THE FINE SECTION OF THE OIL SEPARATOR IS RETURNED TO THE COMPRESSORS SUCTION SIDE VIA AN ADDITIONAL INJECTION ORIFICE. TECHNICAL DATA MANUFACTURER: YORK SABROE DENMARK MANUFACTURING YEAR: 2002 COMPRESSOR TYPE: SAB 128 HF (DUOPACK) REFRIGERANT: R 22 COOLING CAPACITY: 2 X 379 KW ( 0 /+40C) SWEPT VOLUME: 2 X 454 M3/H ELECTRIC DRIVES (COMPRESSOR): 2 X 110 KW - 400/690 V 50HZ (ALSO SUITABLE FOR 60HZ) CONTROL SYSTEM: UNISAB III
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make vollrath, type ewthv 0.5, no 24.643, new 2002, dissolver , material mild steel , shaft length 290mm, disc diameter (2x)dia.34mm, dia.47mm, dia.87mm, motor 0,30 kw, 218-242/380-420 volt (ex), with variable speed drive , speed mixing shaft 259-1964 rpm, floorspace 0,6x0,35 m, total height 0,95 m, weight 100 kg, height pan max.250mmdissolversmixers > dissolvers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE VOLLRATH, TYPE EWTHV 0.5, NO 24.643, NEW 2002, DISSOLVER , MATERIAL MILD STEEL , SHAFT LENGTH 290MM, DISC DIAMETER (2X)DIA.34MM, DIA.47MM, DIA.87MM, MOTOR 0,30 KW, 218-242/380-420 VOLT (EX), WITH VARIABLE SPEED DRIVE , SPEED MIXING SHAFT 259-1964 RPM, FLOORSPACE 0,6X0,35 M, TOTAL HEIGHT 0,95 M, WEIGHT 100 KG, HEIGHT PAN MAX.250MMDISSOLVERSMIXERS > DISSOLVERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-filler monoblock for 5 liter pet bottles khs innofill dvf 84/9sv pet

this volumetric pet bottler filler was manufactured by khs in 2006 and it has been used for filling beer in 5 liter pet bottles and it is suitable also for filling csd. this filler has capacity of 7000 x 5 liter pet bottles beer in an hour and it has been used very limited hours, around 10 000 hours only and it is in excellent condition. the filler comes with full bottle inspection system.

technical data
manufactured by khs in 2006
monobloc capacity 7 000 x 5 liter pet / hour
pet bottle used 5 liter with pco 34 mm closure
filler type khs innofill dvf 84/9sv pet with 84 filling valves
rinser khs innoclean fr-zmv 30/60 pet with 30 rinsing position
cap closing unit khs 9 stations 34 mm screw cap
cap loading unit magnettechnik corkmaster
filling inspector metec p4000, fms-r(uf) FILLER MONOBLOCK FOR 5 LITER PET BOTTLES KHS INNOFILL DVF 84/9SV PET THIS VOLUMETRIC PET BOTTLER FILLER WAS MANUFACTURED BY KHS IN 2006 AND IT HAS BEEN USED FOR FILLING BEER IN 5 LITER PET BOTTLES AND IT IS SUITABLE ALSO FOR FILLING CSD. THIS FILLER HAS CAPACITY OF 7000 X 5 LITER PET BOTTLES BEER IN AN HOUR AND IT HAS BEEN USED VERY LIMITED HOURS, AROUND 10 000 HOURS ONLY AND IT IS IN EXCELLENT CONDITION. THE FILLER COMES WITH FULL BOTTLE INSPECTION SYSTEM. TECHNICAL DATA MANUFACTURED BY KHS IN 2006 MONOBLOC CAPACITY 7 000 X 5 LITER PET / HOUR PET BOTTLE USED 5 LITER WITH PCO 34 MM CLOSURE FILLER TYPE KHS INNOFILL DVF 84/9SV PET WITH 84 FILLING VALVES RINSER KHS INNOCLEAN FR-ZMV 30/60 PET WITH 30 RINSING POSITION CAP CLOSING UNIT KHS 9 STATIONS 34 MM SCREW CAP CAP LOADING UNIT MAGNETTECHNIK CORKMASTER FILLING INSPECTOR METEC P4000, FMS-R(UF)
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make wilhelm niemann machinenfabriek, type kdv 491, no 891562, dissolver , material stainless steel , shaft length 1000mm, disc diameter (1x)dia.500, (1x)dia.560mm, motor 36 kw, 380 volt (ex), speed mixing shaft 300/1400 rpm, with pans (1x), pan material stainless steel , capacity +/- 1700 ltr, pan sizes dia.1300 x1350mm, outlet dia.75mm, with hydraulic lifting , motor 1,1 kw, 220/380volt (ex), with switch , floorspace 2,1x1,3 m, total height 2,4 m, weight 1600 kgdissolversmixers > dissolvers what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE WILHELM NIEMANN MACHINENFABRIEK, TYPE KDV 491, NO 891562, DISSOLVER , MATERIAL STAINLESS STEEL , SHAFT LENGTH 1000MM, DISC DIAMETER (1X)DIA.500, (1X)DIA.560MM, MOTOR 36 KW, 380 VOLT (EX), SPEED MIXING SHAFT 300/1400 RPM, WITH PANS (1X), PAN MATERIAL STAINLESS STEEL , CAPACITY +/- 1700 LTR, PAN SIZES DIA.1300 X1350MM, OUTLET DIA.75MM, WITH HYDRAULIC LIFTING , MOTOR 1,1 KW, 220/380VOLT (EX), WITH SWITCH , FLOORSPACE 2,1X1,3 M, TOTAL HEIGHT 2,4 M, WEIGHT 1600 KGDISSOLVERSMIXERS > DISSOLVERS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-yeast tanks 8 x 7.6 m3, scandi brew

yeast tank farm with 8 insulated stainless steel tanks with agitators and heating & cooling circuits for temperature control. each tank has electric motor driven agitator for mixing. tanks comes with valve banks, control cabinet and service platforms as shown in pictures.

manufacturer: scandi brew, denmark
made in year: 1998
number of tanks: 8
gross volume of each tank: 7627 liters
operating pressure: - 1 / 2.2 bar
operating temperature max. 120 °c
material: stainless steel 1.4301
cooling and heating media: glycol
tanks are equipped with electric motor driven agitator
one heating and one cooling circuit
insulation with stainless steel cladding
service platform
valve and controls YEAST TANKS 8 X 7.6 M3, SCANDI BREW YEAST TANK FARM WITH 8 INSULATED STAINLESS STEEL TANKS WITH AGITATORS AND HEATING & COOLING CIRCUITS FOR TEMPERATURE CONTROL. EACH TANK HAS ELECTRIC MOTOR DRIVEN AGITATOR FOR MIXING. TANKS COMES WITH VALVE BANKS, CONTROL CABINET AND SERVICE PLATFORMS AS SHOWN IN PICTURES. MANUFACTURER: SCANDI BREW, DENMARK MADE IN YEAR: 1998 NUMBER OF TANKS: 8 GROSS VOLUME OF EACH TANK: 7627 LITERS OPERATING PRESSURE: - 1 / 2.2 BAR OPERATING TEMPERATURE MAX. 120 °C MATERIAL: STAINLESS STEEL 1.4301 COOLING AND HEATING MEDIA: GLYCOL TANKS ARE EQUIPPED WITH ELECTRIC MOTOR DRIVEN AGITATOR ONE HEATING AND ONE COOLING CIRCUIT INSULATION WITH STAINLESS STEEL CLADDING SERVICE PLATFORM VALVE AND CONTROLS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make donati srl calcio (it), type pvc/r2, mach.no. ntp 700/520, elevator belt , material mild steel , belt material plastic , belt width 530mm, belt length 5200mm, with carriers , carrier height 50mm, with side guides /brushes, with motor 1,5 kw, 220/380 volt, mounted on frame , floorspace 7,0x1,2 m, weight 640 kgconveyor beltsconveyor screws > conveyor belts what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE DONATI SRL CALCIO (IT), TYPE PVC/R2, MACH.NO. NTP 700/520, ELEVATOR BELT , MATERIAL MILD STEEL , BELT MATERIAL PLASTIC , BELT WIDTH 530MM, BELT LENGTH 5200MM, WITH CARRIERS , CARRIER HEIGHT 50MM, WITH SIDE GUIDES /BRUSHES, WITH MOTOR 1,5 KW, 220/380 VOLT, MOUNTED ON FRAME , FLOORSPACE 7,0X1,2 M, WEIGHT 640 KGCONVEYOR BELTSCONVEYOR SCREWS > CONVEYOR BELTS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-make hethon feeder, type 42-s-liw, no 0662, new 1997, metering screw , material stainless steel , screw diameter dia.25mm, pitch 25mm, screw length 400mm, with hopper , hopper sizes 370x370x400mm, with motor 0.18kw, 220volt, hopper with flexible wall , with switchgear , floorspace 1.1x0.7 m, total height 0.9 m, weight 100 kgmetering screwsconveyor screws > metering screws what you can expect from foeth: -- machine is in working condition -- at a reduced price compared to new -- ready for shipping to any destination worldwide -- you are welcome to inspect the machine in barneveld, the netherlands. visit our  foeth  for many more machines! MAKE HETHON FEEDER, TYPE 42-S-LIW, NO 0662, NEW 1997, METERING SCREW , MATERIAL STAINLESS STEEL , SCREW DIAMETER DIA.25MM, PITCH 25MM, SCREW LENGTH 400MM, WITH HOPPER , HOPPER SIZES 370X370X400MM, WITH MOTOR 0.18KW, 220VOLT, HOPPER WITH FLEXIBLE WALL , WITH SWITCHGEAR , FLOORSPACE 1.1X0.7 M, TOTAL HEIGHT 0.9 M, WEIGHT 100 KGMETERING SCREWSCONVEYOR SCREWS > METERING SCREWS WHAT YOU CAN EXPECT FROM FOETH: -- MACHINE IS IN WORKING CONDITION -- AT A REDUCED PRICE COMPARED TO NEW -- READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE -- YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR FOETH FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection molding machine demag dnc ii 175

this demag injection molding machine was a testing machine in a petrochemical factory and afterwards it served several years as a training machine in a local technical university. the machine is used in laboratory test production and training purposes only, not in actual production ever. we dismantled it in 2008 and took it to our warehouse where it is today. it looks to be in good condition.

technical description:
manufacturer: mannesmann demag kunstofftechnik, germany
type: m-type demag dnc ii 175
year: 1981 – very little used
screw diameter: 52 mm, 16d
clamping force: 1750kn
injection volume: 380 cm3
control: microprocessor control system
measurements: 6.6 x 1.5 x 2.2 m (lxwxh)
weight: 7.800 kg
condition: very good – operational
typical products: pipe fittings, house hold articles, technical products INJECTION MOLDING MACHINE DEMAG DNC II 175 THIS DEMAG INJECTION MOLDING MACHINE WAS A TESTING MACHINE IN A PETROCHEMICAL FACTORY AND AFTERWARDS IT SERVED SEVERAL YEARS AS A TRAINING MACHINE IN A LOCAL TECHNICAL UNIVERSITY. THE MACHINE IS USED IN LABORATORY TEST PRODUCTION AND TRAINING PURPOSES ONLY, NOT IN ACTUAL PRODUCTION EVER. WE DISMANTLED IT IN 2008 AND TOOK IT TO OUR WAREHOUSE WHERE IT IS TODAY. IT LOOKS TO BE IN GOOD CONDITION. TECHNICAL DESCRIPTION: MANUFACTURER: MANNESMANN DEMAG KUNSTOFFTECHNIK, GERMANY TYPE: M-TYPE DEMAG DNC II 175 YEAR: 1981 – VERY LITTLE USED SCREW DIAMETER: 52 MM, 16D CLAMPING FORCE: 1750KN INJECTION VOLUME: 380 CM3 CONTROL: MICROPROCESSOR CONTROL SYSTEM MEASUREMENTS: 6.6 X 1.5 X 2.2 M (LXWXH) WEIGHT: 7.800 KG CONDITION: VERY GOOD – OPERATIONAL TYPICAL PRODUCTS: PIPE FITTINGS, HOUSE HOLD ARTICLES, TECHNICAL PRODUCTS
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: 78.000 €
Ubicación: Land-blade, stabilizers, hydraulic boom, hammer, shear and tilt hydraulics, air condition, central greasing, steelwrist, quick coupler, 1 tilt bucket, 16,9t; gross weight [kg]: 16900; accessories: schild, pratzen, hydraulischer ausleger, hammer-, scheren- und tilthydraulik, air condition, zentralschmierung, steelwrist, schnellwechslung, 1 hydraulischer grabenräumer, 16, 9t // blade, stabilizers, hydraulic boom, hammer, shear and tilt hydraulics, ai BLADE, STABILIZERS, HYDRAULIC BOOM, HAMMER, SHEAR AND TILT HYDRAULICS, AIR CONDITION, CENTRAL GREASING, STEELWRIST, QUICK COUPLER, 1 TILT BUCKET, 16,9T; GROSS WEIGHT [KG]: 16900; ACCESSORIES: SCHILD, PRATZEN, HYDRAULISCHER AUSLEGER, HAMMER-, SCHEREN- UND TILTHYDRAULIK, AIR CONDITION, ZENTRALSCHMIERUNG, STEELWRIST, SCHNELLWECHSLUNG, 1 HYDRAULISCHER GRABENRäUMER, 16, 9T // BLADE, STABILIZERS, HYDRAULIC BOOM, HAMMER, SHEAR AND TILT HYDRAULICS, AI
Vendedor: Podlasly Baumaschinen GmbH
Año de construcción: usado
Ubicación: Land-wartsila 52 mw chp power plant with 6 x 20v34sg gas generators - 2005

complete running power plant with 6 units of wartsila 20v34sg spark ignited natural gas engine driven generators. plant has the heat recovery boilers which can produce 6 x 4.5 t/h low pressure steam. the main equipment was delivered and commissioned by wartsila in year 2006 and 2008 and today the units have approx 40 000 - 50 000 operating hours depending on unit. the equipment is in good operational condition but the engines need a 46 000 hour overhaul.

generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.

the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power

main technical data at full load and current site conditions:
installed power 52 300 kw at 31.5 kv, 50 hz
plant steam output 6 x 5 tons/h at 14 bar
fuel: natural gas
engines: 6 x w20v34sg, running at 750 rpm
alternators: 6 x abb 12 162 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2005
operating hours: approx 50000 /unit
original heat rate (at alt.) 8188 kj/kwhe (44.0 %)
plant own consumption: 1200 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: in good operational WARTSILA 52 MW CHP POWER PLANT WITH 6 X 20V34SG GAS GENERATORS - 2005 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 20V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. PLANT HAS THE HEAT RECOVERY BOILERS WHICH CAN PRODUCE 6 X 4.5 T/H LOW PRESSURE STEAM. THE MAIN EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2006 AND 2008 AND TODAY THE UNITS HAVE APPROX 40 000 - 50 000 OPERATING HOURS DEPENDING ON UNIT. THE EQUIPMENT IS IN GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 46 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER 52 300 KW AT 31.5 KV, 50 HZ PLANT STEAM OUTPUT 6 X 5 TONS/H AT 14 BAR FUEL: NATURAL GAS ENGINES: 6 X W20V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X ABB 12 162 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2005 OPERATING HOURS: APPROX 50000 /UNIT ORIGINAL HEAT RATE (AT ALT.) 8188 KJ/KWHE (44.0 %) PLANT OWN CONSUMPTION: 1200 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: IN GOOD OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6852; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 454 ; GROSS WEIGHT [KG]: 6852; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 454
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-wartsila 41 mw single cycle power plant with 6 x 16v34sg gas generators - 2008
 
complete running power plant with 6 units of wartsila 16v34sg spark ignited natural gas engine driven generators. the equipment was delivered and commissioned by wartsila in year 2008 and today the units have approx 25 000 operating hours. the equipment is in very good operational condition but the engines need a 24 000 hour overhaul.
 
generators are installed on common base frame with the engines and common base frame is isolated from the foundation by flexible mounting with steel springs. most of the auxiliaries are in the factory built in large new type modules which enable easy relocation of the equipment.
 
the engines are of the four stroke, lean burn, pre chamber, spark ignited, port injected, trunk piston, turbocharged and intercooled design. the engine automation is a complete embedded management system, integrated with an engine control system for electricity controlled fuel injection. the control system is distributed bus based system where monitoring and control function is placed close to measuring and control point. this leads to less wiring and improved performance. the engines are designed for continuous operation in gas mode in island mode at any load between 40 -100% of nominal power
 
main technical data at full load and current site conditions:
 
installed power: 41 820 kw at 31.5 kv, 50 hz
fuel: natural gas
engines: 6 x w16v34sg, running at 750 rpm
alternators: 6 x akv 8712 kva, 11 kv, 50 hz, p.f. 0.8
year of manufacturing: 2008
operating hours: approx 25000 /unit
original heat rate (at alt. term) 8140 kj/kwhe (44.2 %)
plant own consumption: 836 kw
cooling system: closed loop radiators
status: in peak loading operation
condition: very good, operational WARTSILA 41 MW SINGLE CYCLE POWER PLANT WITH 6 X 16V34SG GAS GENERATORS - 2008 COMPLETE RUNNING POWER PLANT WITH 6 UNITS OF WARTSILA 16V34SG SPARK IGNITED NATURAL GAS ENGINE DRIVEN GENERATORS. THE EQUIPMENT WAS DELIVERED AND COMMISSIONED BY WARTSILA IN YEAR 2008 AND TODAY THE UNITS HAVE APPROX 25 000 OPERATING HOURS. THE EQUIPMENT IS IN VERY GOOD OPERATIONAL CONDITION BUT THE ENGINES NEED A 24 000 HOUR OVERHAUL. GENERATORS ARE INSTALLED ON COMMON BASE FRAME WITH THE ENGINES AND COMMON BASE FRAME IS ISOLATED FROM THE FOUNDATION BY FLEXIBLE MOUNTING WITH STEEL SPRINGS. MOST OF THE AUXILIARIES ARE IN THE FACTORY BUILT IN LARGE NEW TYPE MODULES WHICH ENABLE EASY RELOCATION OF THE EQUIPMENT. THE ENGINES ARE OF THE FOUR STROKE, LEAN BURN, PRE CHAMBER, SPARK IGNITED, PORT INJECTED, TRUNK PISTON, TURBOCHARGED AND INTERCOOLED DESIGN. THE ENGINE AUTOMATION IS A COMPLETE EMBEDDED MANAGEMENT SYSTEM, INTEGRATED WITH AN ENGINE CONTROL SYSTEM FOR ELECTRICITY CONTROLLED FUEL INJECTION. THE CONTROL SYSTEM IS DISTRIBUTED BUS BASED SYSTEM WHERE MONITORING AND CONTROL FUNCTION IS PLACED CLOSE TO MEASURING AND CONTROL POINT. THIS LEADS TO LESS WIRING AND IMPROVED PERFORMANCE. THE ENGINES ARE DESIGNED FOR CONTINUOUS OPERATION IN GAS MODE IN ISLAND MODE AT ANY LOAD BETWEEN 40 -100% OF NOMINAL POWER MAIN TECHNICAL DATA AT FULL LOAD AND CURRENT SITE CONDITIONS: INSTALLED POWER: 41 820 KW AT 31.5 KV, 50 HZ FUEL: NATURAL GAS ENGINES: 6 X W16V34SG, RUNNING AT 750 RPM ALTERNATORS: 6 X AKV 8712 KVA, 11 KV, 50 HZ, P.F. 0.8 YEAR OF MANUFACTURING: 2008 OPERATING HOURS: APPROX 25000 /UNIT ORIGINAL HEAT RATE (AT ALT. TERM) 8140 KJ/KWHE (44.2 %) PLANT OWN CONSUMPTION: 836 KW COOLING SYSTEM: CLOSED LOOP RADIATORS STATUS: IN PEAK LOADING OPERATION CONDITION: VERY GOOD, OPERATIONAL
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6852; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 454 ; GROSS WEIGHT [KG]: 6852; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 454
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-labeling machine krones autocol 747 rotary pressure sensitive 55 000 bph

this labeling machine was manufactured in year 2009 by krones and it has been operated very limited hours till year 2012. it has three double reel stations for self-adhesive paper and film labels to be placed on front-back-neck of a bottle. each container plate on the container table is powered by a computer controlled actuator. the bottle rotations required for rolling on the labels are conducted according to a set program. when changing over to a new type label, no mechanical cam must be changed. capacity with 0.5 liter glass bottle is 55 000 bph, the labeler is still installed and in excellent condition (with a aci empty bottle inspector, europool dryer and krones checkmatic label inspector and related conveyors)
technical data of this labeler:
- manufactured by korones ag in year 2009
- estimated running hours approx 15 000 only
- model autocol asl k-747-838a34
- three label stations with double reels for discontinuous reel change over
- 60 computer controlled container stations
- front-back-neck adhesive paper and film labels
- capacity 55 000 bph with 0.5 liter glass bottle
- simens simatic s7 plc with touch screen
- helix style infeed and discharge
- videojet laser coder
- vertical sliding safety guards with interlocks LABELING MACHINE KRONES AUTOCOL 747 ROTARY PRESSURE SENSITIVE 55 000 BPH THIS LABELING MACHINE WAS MANUFACTURED IN YEAR 2009 BY KRONES AND IT HAS BEEN OPERATED VERY LIMITED HOURS TILL YEAR 2012. IT HAS THREE DOUBLE REEL STATIONS FOR SELF-ADHESIVE PAPER AND FILM LABELS TO BE PLACED ON FRONT-BACK-NECK OF A BOTTLE. EACH CONTAINER PLATE ON THE CONTAINER TABLE IS POWERED BY A COMPUTER CONTROLLED ACTUATOR. THE BOTTLE ROTATIONS REQUIRED FOR ROLLING ON THE LABELS ARE CONDUCTED ACCORDING TO A SET PROGRAM. WHEN CHANGING OVER TO A NEW TYPE LABEL, NO MECHANICAL CAM MUST BE CHANGED. CAPACITY WITH 0.5 LITER GLASS BOTTLE IS 55 000 BPH, THE LABELER IS STILL INSTALLED AND IN EXCELLENT CONDITION (WITH A ACI EMPTY BOTTLE INSPECTOR, EUROPOOL DRYER AND KRONES CHECKMATIC LABEL INSPECTOR AND RELATED CONVEYORS) TECHNICAL DATA OF THIS LABELER: - MANUFACTURED BY KORONES AG IN YEAR 2009 - ESTIMATED RUNNING HOURS APPROX 15 000 ONLY - MODEL AUTOCOL ASL K-747-838A34 - THREE LABEL STATIONS WITH DOUBLE REELS FOR DISCONTINUOUS REEL CHANGE OVER - 60 COMPUTER CONTROLLED CONTAINER STATIONS - FRONT-BACK-NECK ADHESIVE PAPER AND FILM LABELS - CAPACITY 55 000 BPH WITH 0.5 LITER GLASS BOTTLE - SIMENS SIMATIC S7 PLC WITH TOUCH SCREEN - HELIX STYLE INFEED AND DISCHARGE - VIDEOJET LASER CODER - VERTICAL SLIDING SAFETY GUARDS WITH INTERLOCKS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-empty bottle inspector heuft inline ebi with reflexx and spectrum units

the machine was installed in year 2007 and its currently in very good operational condition, it has been last serviced and can be demonstrated to customers. the capacity is 60 000 bph. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. it has complete heuft manuals in english

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on a glass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 9/2007
type: heuft inline ebi with reflexx image processing
model: h8 bsxt b 72
capacity: 60 000 bph
reliability: 99.9 % detection complete heuft manuals in english. this unit can be sold to the market.
total operating hours 12750
total on duty hours 27500 EMPTY BOTTLE INSPECTOR HEUFT INLINE EBI WITH REFLEXX AND SPECTRUM UNITS THE MACHINE WAS INSTALLED IN YEAR 2007 AND ITS CURRENTLY IN VERY GOOD OPERATIONAL CONDITION, IT HAS BEEN LAST SERVICED AND CAN BE DEMONSTRATED TO CUSTOMERS. THE CAPACITY IS 60 000 BPH. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. IT HAS COMPLETE HEUFT MANUALS IN ENGLISH THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON A GLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 9/2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING MODEL: H8 BSXT B 72 CAPACITY: 60 000 BPH RELIABILITY: 99.9 % DETECTION COMPLETE HEUFT MANUALS IN ENGLISH. THIS UNIT CAN BE SOLD TO THE MARKET. TOTAL OPERATING HOURS 12750 TOTAL ON DUTY HOURS 27500
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 7402; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; GROSS WEIGHT [KG]: 7402; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-manex new bottle depalletizer and transport system 47 000 bph

manufacturer: manex & co a.s.
type: d313-65l
year: 2008
serial number: 07/030/01 depalletiser
line capacity: 47 000 bottles / hour
electric supply: 32.29 kw ? 230/400 v ? 50 hz
air consumption: 31 m3/h, min 6 bar
control plc: siemens simatic multi panel
pallet dimensions: 1 200 x 1 000 mm
documentation: in english (operating manuals and spare parts list)
condition: installed - very good condition

this system includes smartscan scanning of pallets, a robot for stacking cardboard between the layers, conveyors for transporting the bottles to the next unit and stacking/removing system for pallets. the portal system of machine ensures its maximum stiffness and minimum of covered area. the frame of machine is welded of the bended profiles made of carbon steel. the protective paint is three-plied anticorrosive basic paint and two layers of the top covering paint. depalletizing completion by the pallet chamber and layer pick-up. the basic drive of machine ? the transfer cases are made by sew. the pneumatic elements are made by festo.

working description:
a pallet with a stack of new bottles is transported by a forklift truck to the chain conveyor. operators remove foil from the stack. the pallet with the bottles then moves to the chain conveyor in the depalletizer lift. the depalletizer lift lifts the conveyor with the full pallet as high as required. the transporter moves the top layer of bottles with the top layer pad to the lamella sorting table. the layer pad pick-up removes the layer pad and places it into the layer pad magazine. the bottles are then sorted to the lamella bottle conveyor and continue on the bottle track to the bottle inserter. conveyor in the lift moves up by the thickness of a layer and the entire cycle repeats. once the last layer bottles has been moved by the last remaining layer pad on the pallet, the pick-up removes the layer pads from the pallet. conveyor with the empty pallet moves down to the bottom position. inverter moves in on the roller conveyor to the pallet magazine. the crate transport system moves empty crates to the bottle inserter conveyor. it inserts the bottles from the bottle conveyor to crates. full crates continue moving on the crate conveyors to the sorting roller table.

machinery components:
- chain conveyor for pallets, 3 pcs
- aggregate of depalletization
o elevator
o chain conveyor in the elevator
o transfer layer
o sheet stop
o pinching
o rear bottle thrust
- inverter
- roller conveyor for pallets
- pallet magazine
- layer pad pick-up - complete
o layer pad pick-up
o layer pad magazine
- pallet layer pad pick-up
- lamella bottle splitting table
- lamella bottle conveyor, 3 pcs
- lamella crate conveyor, 7 pcs
- roller sorting table
- platform
- fence MANEX NEW BOTTLE DEPALLETIZER AND TRANSPORT SYSTEM 47 000 BPH MANUFACTURER: MANEX & CO A.S. TYPE: D313-65L YEAR: 2008 SERIAL NUMBER: 07/030/01 DEPALLETISER LINE CAPACITY: 47 000 BOTTLES / HOUR ELECTRIC SUPPLY: 32.29 KW ? 230/400 V ? 50 HZ AIR CONSUMPTION: 31 M3/H, MIN 6 BAR CONTROL PLC: SIEMENS SIMATIC MULTI PANEL PALLET DIMENSIONS: 1 200 X 1 000 MM DOCUMENTATION: IN ENGLISH (OPERATING MANUALS AND SPARE PARTS LIST) CONDITION: INSTALLED - VERY GOOD CONDITION THIS SYSTEM INCLUDES SMARTSCAN SCANNING OF PALLETS, A ROBOT FOR STACKING CARDBOARD BETWEEN THE LAYERS, CONVEYORS FOR TRANSPORTING THE BOTTLES TO THE NEXT UNIT AND STACKING/REMOVING SYSTEM FOR PALLETS. THE PORTAL SYSTEM OF MACHINE ENSURES ITS MAXIMUM STIFFNESS AND MINIMUM OF COVERED AREA. THE FRAME OF MACHINE IS WELDED OF THE BENDED PROFILES MADE OF CARBON STEEL. THE PROTECTIVE PAINT IS THREE-PLIED ANTICORROSIVE BASIC PAINT AND TWO LAYERS OF THE TOP COVERING PAINT. DEPALLETIZING COMPLETION BY THE PALLET CHAMBER AND LAYER PICK-UP. THE BASIC DRIVE OF MACHINE ? THE TRANSFER CASES ARE MADE BY SEW. THE PNEUMATIC ELEMENTS ARE MADE BY FESTO. WORKING DESCRIPTION: A PALLET WITH A STACK OF NEW BOTTLES IS TRANSPORTED BY A FORKLIFT TRUCK TO THE CHAIN CONVEYOR. OPERATORS REMOVE FOIL FROM THE STACK. THE PALLET WITH THE BOTTLES THEN MOVES TO THE CHAIN CONVEYOR IN THE DEPALLETIZER LIFT. THE DEPALLETIZER LIFT LIFTS THE CONVEYOR WITH THE FULL PALLET AS HIGH AS REQUIRED. THE TRANSPORTER MOVES THE TOP LAYER OF BOTTLES WITH THE TOP LAYER PAD TO THE LAMELLA SORTING TABLE. THE LAYER PAD PICK-UP REMOVES THE LAYER PAD AND PLACES IT INTO THE LAYER PAD MAGAZINE. THE BOTTLES ARE THEN SORTED TO THE LAMELLA BOTTLE CONVEYOR AND CONTINUE ON THE BOTTLE TRACK TO THE BOTTLE INSERTER. CONVEYOR IN THE LIFT MOVES UP BY THE THICKNESS OF A LAYER AND THE ENTIRE CYCLE REPEATS. ONCE THE LAST LAYER BOTTLES HAS BEEN MOVED BY THE LAST REMAINING LAYER PAD ON THE PALLET, THE PICK-UP REMOVES THE LAYER PADS FROM THE PALLET. CONVEYOR WITH THE EMPTY PALLET MOVES DOWN TO THE BOTTOM POSITION. INVERTER MOVES IN ON THE ROLLER CONVEYOR TO THE PALLET MAGAZINE. THE CRATE TRANSPORT SYSTEM MOVES EMPTY CRATES TO THE BOTTLE INSERTER CONVEYOR. IT INSERTS THE BOTTLES FROM THE BOTTLE CONVEYOR TO CRATES. FULL CRATES CONTINUE MOVING ON THE CRATE CONVEYORS TO THE SORTING ROLLER TABLE. MACHINERY COMPONENTS: - CHAIN CONVEYOR FOR PALLETS, 3 PCS - AGGREGATE OF DEPALLETIZATION O ELEVATOR O CHAIN CONVEYOR IN THE ELEVATOR O TRANSFER LAYER O SHEET STOP O PINCHING O REAR BOTTLE THRUST - INVERTER - ROLLER CONVEYOR FOR PALLETS - PALLET MAGAZINE - LAYER PAD PICK-UP - COMPLETE O LAYER PAD PICK-UP O LAYER PAD MAGAZINE - PALLET LAYER PAD PICK-UP - LAMELLA BOTTLE SPLITTING TABLE - LAMELLA BOTTLE CONVEYOR, 3 PCS - LAMELLA CRATE CONVEYOR, 7 PCS - ROLLER SORTING TABLE - PLATFORM - FENCE
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 830; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 830; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-oil free screw air compressor atlas-copco zr 250 with mb 600 desiccant dryer
 
the compressor is water cooled and totally oil free two stage screw compressor with inter- and after coolers. package includes also md adsorption dryer for out let air which don't need any external energy (purge air). the equipment is a sound canopy and it is controlled with advanced eletronikon control system. the compressor in good operational condition, it has ce marking and it is still installed and can be tested. running video available
 
technical data
manufactured by: atlas copco belgium
made in year: 1997
type: zr 250
serial number: atf 053886
total operation hours: 64200
loaded hours: 50700
capacity (fad): 37.7 m3/min at 10.0 bar
electric motor: 250 kw
compressor rotating speed: 1485 rpm
air dryer: atlas-copco md 600, sr no aio 009885
compressor dimensions: 4.34 x 2.00 x 1.65 m (l x h x w)
weight - compressor 5360 kg OIL FREE SCREW AIR COMPRESSOR ATLAS-COPCO ZR 250 WITH MB 600 DESICCANT DRYER THE COMPRESSOR IS WATER COOLED AND TOTALLY OIL FREE TWO STAGE SCREW COMPRESSOR WITH INTER- AND AFTER COOLERS. PACKAGE INCLUDES ALSO MD ADSORPTION DRYER FOR OUT LET AIR WHICH DON'T NEED ANY EXTERNAL ENERGY (PURGE AIR). THE EQUIPMENT IS A SOUND CANOPY AND IT IS CONTROLLED WITH ADVANCED ELETRONIKON CONTROL SYSTEM. THE COMPRESSOR IN GOOD OPERATIONAL CONDITION, IT HAS CE MARKING AND IT IS STILL INSTALLED AND CAN BE TESTED. RUNNING VIDEO AVAILABLE TECHNICAL DATA MANUFACTURED BY: ATLAS COPCO BELGIUM MADE IN YEAR: 1997 TYPE: ZR 250 SERIAL NUMBER: ATF 053886 TOTAL OPERATION HOURS: 64200 LOADED HOURS: 50700 CAPACITY (FAD): 37.7 M3/MIN AT 10.0 BAR ELECTRIC MOTOR: 250 KW COMPRESSOR ROTATING SPEED: 1485 RPM AIR DRYER: ATLAS-COPCO MD 600, SR NO AIO 009885 COMPRESSOR DIMENSIONS: 4.34 X 2.00 X 1.65 M (L X H X W) WEIGHT - COMPRESSOR 5360 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type tcd2012l042vm

75 kw at 2400 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE TCD2012L042VM 75 KW AT 2400 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 227 ; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 227
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-this inline heuft ebi was made in year 2007 and relocated in 2011. today it is still installed but not in use nor connected to the power. this ebi is designed for class bottles, sizes 0.33 and 0.5 liters. the capacity of this inline ebi is min 50 000 bph and equipment is in very good condition.

this heuft inline ebi makes the following scans:
for detecting residual material in a bottle it has both hf (high frequency) and if (infra red) detections systems. during hf scanning an electric field is generated in the base area of the container. conductive liquids in a container change this field. even a single drop of lye can be reliably detected with this hf system. the ir detection is based on the absorption of infrared radiation in a liquid. non-conductive material can be detected by a special sensor which measures the infrared radiation which has passed through.

sidewall inspection is made rotating bottle full 90 degree and it will be optically examined all around bottle in order to detect all possible contamination and damage. finishing inspection for faults and cracks on the bottle finish wide range of analysis tools for specifically identifying critical faults around the bottle opening. for this led strobes project different colored rings of light from above onto the bottle opening. their reflections are specifically analyzed with an interaction of high-resolution camera technology and high-performance image processing and filter procedures. faulty bottles are removed directly from the production flow. the inspection covers the complete sealing surface of the finish but also the sealing lip, the locking ring and the curved side finish area below it.

the ebi has optical heuft thread detection system which inspects the screw closure finish on aglass bottle completely. the system takes a picture of the complete circumference of the closure area with two separate cameras and mirror cabinets. the individual pictures of the different views are then put together and checked for faults.

this ebi is equipped with powerful heuft reflexx image processing system which is combining several camera pictures and x-ray images in real time. the heuft inline with heuft reflexx technology offers an optimal fault detection with a minimum false rejection rate. in this way standard glass bottles which contain the following foreign objects are detected with a reliability of 99.9 % and rejected.

technical data:
manufacturer: heuft gmbh, germany
year: 2007
type: heuft inline ebi with reflexx image processing
capacity: up to 70 000 bph
reliability: 99.9 % detection THIS INLINE HEUFT EBI WAS MADE IN YEAR 2007 AND RELOCATED IN 2011. TODAY IT IS STILL INSTALLED BUT NOT IN USE NOR CONNECTED TO THE POWER. THIS EBI IS DESIGNED FOR CLASS BOTTLES, SIZES 0.33 AND 0.5 LITERS. THE CAPACITY OF THIS INLINE EBI IS MIN 50 000 BPH AND EQUIPMENT IS IN VERY GOOD CONDITION. THIS HEUFT INLINE EBI MAKES THE FOLLOWING SCANS: FOR DETECTING RESIDUAL MATERIAL IN A BOTTLE IT HAS BOTH HF (HIGH FREQUENCY) AND IF (INFRA RED) DETECTIONS SYSTEMS. DURING HF SCANNING AN ELECTRIC FIELD IS GENERATED IN THE BASE AREA OF THE CONTAINER. CONDUCTIVE LIQUIDS IN A CONTAINER CHANGE THIS FIELD. EVEN A SINGLE DROP OF LYE CAN BE RELIABLY DETECTED WITH THIS HF SYSTEM. THE IR DETECTION IS BASED ON THE ABSORPTION OF INFRARED RADIATION IN A LIQUID. NON-CONDUCTIVE MATERIAL CAN BE DETECTED BY A SPECIAL SENSOR WHICH MEASURES THE INFRARED RADIATION WHICH HAS PASSED THROUGH. SIDEWALL INSPECTION IS MADE ROTATING BOTTLE FULL 90 DEGREE AND IT WILL BE OPTICALLY EXAMINED ALL AROUND BOTTLE IN ORDER TO DETECT ALL POSSIBLE CONTAMINATION AND DAMAGE. FINISHING INSPECTION FOR FAULTS AND CRACKS ON THE BOTTLE FINISH WIDE RANGE OF ANALYSIS TOOLS FOR SPECIFICALLY IDENTIFYING CRITICAL FAULTS AROUND THE BOTTLE OPENING. FOR THIS LED STROBES PROJECT DIFFERENT COLORED RINGS OF LIGHT FROM ABOVE ONTO THE BOTTLE OPENING. THEIR REFLECTIONS ARE SPECIFICALLY ANALYZED WITH AN INTERACTION OF HIGH-RESOLUTION CAMERA TECHNOLOGY AND HIGH-PERFORMANCE IMAGE PROCESSING AND FILTER PROCEDURES. FAULTY BOTTLES ARE REMOVED DIRECTLY FROM THE PRODUCTION FLOW. THE INSPECTION COVERS THE COMPLETE SEALING SURFACE OF THE FINISH BUT ALSO THE SEALING LIP, THE LOCKING RING AND THE CURVED SIDE FINISH AREA BELOW IT. THE EBI HAS OPTICAL HEUFT THREAD DETECTION SYSTEM WHICH INSPECTS THE SCREW CLOSURE FINISH ON AGLASS BOTTLE COMPLETELY. THE SYSTEM TAKES A PICTURE OF THE COMPLETE CIRCUMFERENCE OF THE CLOSURE AREA WITH TWO SEPARATE CAMERAS AND MIRROR CABINETS. THE INDIVIDUAL PICTURES OF THE DIFFERENT VIEWS ARE THEN PUT TOGETHER AND CHECKED FOR FAULTS. THIS EBI IS EQUIPPED WITH POWERFUL HEUFT REFLEXX IMAGE PROCESSING SYSTEM WHICH IS COMBINING SEVERAL CAMERA PICTURES AND X-RAY IMAGES IN REAL TIME. THE HEUFT INLINE WITH HEUFT REFLEXX TECHNOLOGY OFFERS AN OPTIMAL FAULT DETECTION WITH A MINIMUM FALSE REJECTION RATE. IN THIS WAY STANDARD GLASS BOTTLES WHICH CONTAIN THE FOLLOWING FOREIGN OBJECTS ARE DETECTED WITH A RELIABILITY OF 99.9 % AND REJECTED. TECHNICAL DATA: MANUFACTURER: HEUFT GMBH, GERMANY YEAR: 2007 TYPE: HEUFT INLINE EBI WITH REFLEXX IMAGE PROCESSING CAPACITY: UP TO 70 000 BPH RELIABILITY: 99.9 % DETECTION
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-well-functioning used hatz engine (diesel) type 4m41

49 kw at 2500 rpm

we have a large choice of new and used engines. 
please contact us regarding pricing and availability.
  WELL-FUNCTIONING USED HATZ ENGINE (DIESEL) TYPE 4M41 49 KW AT 2500 RPM WE HAVE A LARGE CHOICE OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 15500; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 350 ; GROSS WEIGHT [KG]: 15500; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 350
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-well-functioning used isuzu motor (diesel) 4jg1 type

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED ISUZU MOTOR (DIESEL) 4JG1 TYPE WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-automatic line for non-alcohol beer production from the normal filtered beer.

two identical plants to produce non-alcoholic beer from normal filtered beer by utilizing microfiltration production technology. the production lines were installed in year 2001 and they are still installed and in good operational condition.

beer is pumped through the microfilter under pressure, water and flavors pass through the microfilter, but alcohol molecules remain on the filter surface and then wash off with the water. after the water with alcohol goes to distillation column, where alcohol separates from the water. water after separation returns back into the system for reuse. both lines has original capacity of 20 hl unfiltered beer but due to capacity decrease of wood framed filters, currently microfilters work with capacity up to 10 hl/h. the cost of replacement new type (plastic) microfilters is about 320 thousand euros. lifetime of new microfilters is about 10 years. otherwise the equipment is in very good condition and immediately available.

technical data

- manufacturer apv
- year of manufacture 2001
- filter type microdyn-nadir dp 100 fp/s
- capacity 2 x 20 hl/h original


list of equipment:
- set of microfilters, 48 pieces with their stainless steel supports and piping
- rectification column with boiler, pumps and valves
- water purification system
- water tank
- cip
- control cabinets
- samplers
- pipes, pumps, valves etc.

note: the heat exchanger and the cooling tower remain at the plant and they are not included in the scope of supply. AUTOMATIC LINE FOR NON-ALCOHOL BEER PRODUCTION FROM THE NORMAL FILTERED BEER. TWO IDENTICAL PLANTS TO PRODUCE NON-ALCOHOLIC BEER FROM NORMAL FILTERED BEER BY UTILIZING MICROFILTRATION PRODUCTION TECHNOLOGY. THE PRODUCTION LINES WERE INSTALLED IN YEAR 2001 AND THEY ARE STILL INSTALLED AND IN GOOD OPERATIONAL CONDITION. BEER IS PUMPED THROUGH THE MICROFILTER UNDER PRESSURE, WATER AND FLAVORS PASS THROUGH THE MICROFILTER, BUT ALCOHOL MOLECULES REMAIN ON THE FILTER SURFACE AND THEN WASH OFF WITH THE WATER. AFTER THE WATER WITH ALCOHOL GOES TO DISTILLATION COLUMN, WHERE ALCOHOL SEPARATES FROM THE WATER. WATER AFTER SEPARATION RETURNS BACK INTO THE SYSTEM FOR REUSE. BOTH LINES HAS ORIGINAL CAPACITY OF 20 HL UNFILTERED BEER BUT DUE TO CAPACITY DECREASE OF WOOD FRAMED FILTERS, CURRENTLY MICROFILTERS WORK WITH CAPACITY UP TO 10 HL/H. THE COST OF REPLACEMENT NEW TYPE (PLASTIC) MICROFILTERS IS ABOUT 320 THOUSAND EUROS. LIFETIME OF NEW MICROFILTERS IS ABOUT 10 YEARS. OTHERWISE THE EQUIPMENT IS IN VERY GOOD CONDITION AND IMMEDIATELY AVAILABLE. TECHNICAL DATA - MANUFACTURER APV - YEAR OF MANUFACTURE 2001 - FILTER TYPE MICRODYN-NADIR DP 100 FP/S - CAPACITY 2 X 20 HL/H ORIGINAL LIST OF EQUIPMENT: - SET OF MICROFILTERS, 48 PIECES WITH THEIR STAINLESS STEEL SUPPORTS AND PIPING - RECTIFICATION COLUMN WITH BOILER, PUMPS AND VALVES - WATER PURIFICATION SYSTEM - WATER TANK - CIP - CONTROL CABINETS - SAMPLERS - PIPES, PUMPS, VALVES ETC. NOTE: THE HEAT EXCHANGER AND THE COOLING TOWER REMAIN AT THE PLANT AND THEY ARE NOT INCLUDED IN THE SCOPE OF SUPPLY.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-well-functioning used deutz engine (diesel) type d2011l04i

41 kw at 2300 rpm

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 WELL-FUNCTIONING USED DEUTZ ENGINE (DIESEL) TYPE D2011L04I 41 KW AT 2300 RPM WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-for sale exclusively on 30 august 2019 hours 10-30 in cazzago san martino, bs
brand: fiat
model: doblo multijet
year: 2007
km: 173,433
plate: dh719hn
fuel: diesel
displacement: 1248
ps: 84
gearbox: manual
range: 510 kg
libretto and missing cdp
for more information or contact us at + 39 392 4703149 view from monday to friday from 8:30 to 13:00 and from 14:00 to 19:00
  FOR SALE EXCLUSIVELY ON 30 AUGUST 2019 HOURS 10-30 IN CAZZAGO SAN MARTINO, BS BRAND: FIAT MODEL: DOBLO MULTIJET YEAR: 2007 KM: 173,433 PLATE: DH719HN FUEL: DIESEL DISPLACEMENT: 1248 PS: 84 GEARBOX: MANUAL RANGE: 510 KG LIBRETTO AND MISSING CDP FOR MORE INFORMATION OR CONTACT US AT + 39 392 4703149 VIEW FROM MONDAY TO FRIDAY FROM 8:30 TO 13:00 AND FROM 14:00 TO 19:00
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-4l40c type well-functioning used hatz engine (diesel)

we have a large selection of new and used engines. 
please contact us regarding pricing and availability.
 4L40C TYPE WELL-FUNCTIONING USED HATZ ENGINE (DIESEL) WE HAVE A LARGE SELECTION OF NEW AND USED ENGINES. PLEASE CONTACT US REGARDING PRICING AND AVAILABILITY.
Vendedor: Handelsonderneming B.L.J. Roosen BV
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-liquid chiller gea grasso fx 2800 / s - 2 x 2800 kw

two gea grasso fx pv 2800 s - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. the compressors have flooded evaporation, plate type evaporator and evaporative condenser cooler. type they have been operated only 15 000 hours, their cooling capacity is 2800 kw/unit. refrigerant is r717 (nh3)

the delivery includes complete system with compressor package, evaporators, pumps, intermediate nh3 tanks, evaporative condenser and control cabinets.

the screw compressor sucks nh3 gas out of the liquid separator and compresses it up to condensation pressure. the refrigerant turns to liquid as it is cooled in the condenser. the liquid nh3 is injected back to the liquid separator via a high pressure float valve as expansion device. inside the liquid separator liquid form and gas for are separated. the liquid nh3 passes in a gravity driven circuit to the evaporator. during the evaporation into gaseous form (with heat energy delivered by the secondary refrigerant) it evaporates and a mixture of gas and liquid is coming back to the liquid separator. oil is injected into the working chamber of the screw compressor during operation and it is then separated again from the refrigerant in the discharge side oil separator. the oil which has heated up in the compressor is cooled in an oil cooler to reach the entry temperature and passes a fine filter.

this liquid chillers is equipped with a freely programmable standard logic controller plc simatic c7-633. all operating and fault signals as well as the process variables can be read from a lcd display with background lighting. the display is operated via a robust foil keyboard having 6 functions and 24 system keys.

technical data:

manufacturer: gea grasso gmbh
manufacturing year: 2002
number of units: 2 complete units
type: grasso fx vp 2008 / s
cooling capacity: 2800 kw / unit
electric motor: schorch 560 kw / 2988 rpm / 50 hz
refrigerant: r 717 (ammonia)
evaporator: alfa-laval m20-mwfrc
evaporative condenser: bac xx
compressor package ew: 13250 kg LIQUID CHILLER GEA GRASSO FX 2800 / S - 2 X 2800 KW TWO GEA GRASSO FX PV 2800 S - SCREW TYPE LIQUID CHILLER COMPRESSORS WERE INSTALLED IN 2003 (MADE IN 2002) AND THEY STILL INSTALLED AND IN VERY GOOD WORKING CONDITION. THE COMPRESSORS HAVE FLOODED EVAPORATION, PLATE TYPE EVAPORATOR AND EVAPORATIVE CONDENSER COOLER. TYPE THEY HAVE BEEN OPERATED ONLY 15 000 HOURS, THEIR COOLING CAPACITY IS 2800 KW/UNIT. REFRIGERANT IS R717 (NH3) THE DELIVERY INCLUDES COMPLETE SYSTEM WITH COMPRESSOR PACKAGE, EVAPORATORS, PUMPS, INTERMEDIATE NH3 TANKS, EVAPORATIVE CONDENSER AND CONTROL CABINETS. THE SCREW COMPRESSOR SUCKS NH3 GAS OUT OF THE LIQUID SEPARATOR AND COMPRESSES IT UP TO CONDENSATION PRESSURE. THE REFRIGERANT TURNS TO LIQUID AS IT IS COOLED IN THE CONDENSER. THE LIQUID NH3 IS INJECTED BACK TO THE LIQUID SEPARATOR VIA A HIGH PRESSURE FLOAT VALVE AS EXPANSION DEVICE. INSIDE THE LIQUID SEPARATOR LIQUID FORM AND GAS FOR ARE SEPARATED. THE LIQUID NH3 PASSES IN A GRAVITY DRIVEN CIRCUIT TO THE EVAPORATOR. DURING THE EVAPORATION INTO GASEOUS FORM (WITH HEAT ENERGY DELIVERED BY THE SECONDARY REFRIGERANT) IT EVAPORATES AND A MIXTURE OF GAS AND LIQUID IS COMING BACK TO THE LIQUID SEPARATOR. OIL IS INJECTED INTO THE WORKING CHAMBER OF THE SCREW COMPRESSOR DURING OPERATION AND IT IS THEN SEPARATED AGAIN FROM THE REFRIGERANT IN THE DISCHARGE SIDE OIL SEPARATOR. THE OIL WHICH HAS HEATED UP IN THE COMPRESSOR IS COOLED IN AN OIL COOLER TO REACH THE ENTRY TEMPERATURE AND PASSES A FINE FILTER. THIS LIQUID CHILLERS IS EQUIPPED WITH A FREELY PROGRAMMABLE STANDARD LOGIC CONTROLLER PLC SIMATIC C7-633. ALL OPERATING AND FAULT SIGNALS AS WELL AS THE PROCESS VARIABLES CAN BE READ FROM A LCD DISPLAY WITH BACKGROUND LIGHTING. THE DISPLAY IS OPERATED VIA A ROBUST FOIL KEYBOARD HAVING 6 FUNCTIONS AND 24 SYSTEM KEYS. TECHNICAL DATA: MANUFACTURER: GEA GRASSO GMBH MANUFACTURING YEAR: 2002 NUMBER OF UNITS: 2 COMPLETE UNITS TYPE: GRASSO FX VP 2008 / S COOLING CAPACITY: 2800 KW / UNIT ELECTRIC MOTOR: SCHORCH 560 KW / 2988 RPM / 50 HZ REFRIGERANT: R 717 (AMMONIA) EVAPORATOR: ALFA-LAVAL M20-MWFRC EVAPORATIVE CONDENSER: BAC XX COMPRESSOR PACKAGE EW: 13250 KG
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Año de construcción: usado
Ubicación: Land-brewhouse huppmann 410 hl / brew - approx 1 m hl / year

brewhouse made by huppmann in year 2000, 410 hl/brew, with a mash filter, made by nordon in year 1997. it is complete line, in good condition, not dismantled, it is possible to test the equipment. the brewhouse is controlled by pc.

installed mash filter nordon improves the performance of brewing process (compare to filer tank) and allows the use in the production low quality (dusty) malt and the filtration speed and quality do not change.

capacity: mash tank - 410 hl/brew, malt 9 tn. per brew, 12 brews per day
bottle neck is mash tank. brewhouse capacity can be doubled by installation of second mash tank.

list of equipment:
- mash tank huppmann, 410 hl, 4200 mm diameter, malt 9 tons per brew, capacity 12 brews per day, year 2002
- mash tank heat exchanger, api schmidt-bretten type: si 108 sbl, year 2000
- ferments dosing system by prominent with 3 x 500 liter pvc tanks
- mash filter nordon, 53 plates, 1997
- wort collecting tank, horizontal, 410 hl
- wort kettle huppmann, 930 hl, 5200 mm diameter, the heating boiler surface - 55 m2, 2002. boiling of the wort runs at high pressure that allows to reach temperature of 104 - 106 c,
- hop dosing tanks, huppmann 3 x 235 liters, year 1998
- heat exchanger of wort kettle, apv type k55,year 1998
- whirlpool huppmann, 650 hl, diameter 5800 mm, year 2002
- press-filter buffer tanks, huppmann, 1999
- tank for collecting protein
- piping, pumps, valves, etc.
- computer control system of brewhouse based on the pc. BREWHOUSE HUPPMANN 410 HL / BREW - APPROX 1 M HL / YEAR BREWHOUSE MADE BY HUPPMANN IN YEAR 2000, 410 HL/BREW, WITH A MASH FILTER, MADE BY NORDON IN YEAR 1997. IT IS COMPLETE LINE, IN GOOD CONDITION, NOT DISMANTLED, IT IS POSSIBLE TO TEST THE EQUIPMENT. THE BREWHOUSE IS CONTROLLED BY PC. INSTALLED MASH FILTER NORDON IMPROVES THE PERFORMANCE OF BREWING PROCESS (COMPARE TO FILER TANK) AND ALLOWS THE USE IN THE PRODUCTION LOW QUALITY (DUSTY) MALT AND THE FILTRATION SPEED AND QUALITY DO NOT CHANGE. CAPACITY: MASH TANK - 410 HL/BREW, MALT 9 TN. PER BREW, 12 BREWS PER DAY BOTTLE NECK IS MASH TANK. BREWHOUSE CAPACITY CAN BE DOUBLED BY INSTALLATION OF SECOND MASH TANK. LIST OF EQUIPMENT: - MASH TANK HUPPMANN, 410 HL, 4200 MM DIAMETER, MALT 9 TONS PER BREW, CAPACITY 12 BREWS PER DAY, YEAR 2002 - MASH TANK HEAT EXCHANGER, API SCHMIDT-BRETTEN TYPE: SI 108 SBL, YEAR 2000 - FERMENTS DOSING SYSTEM BY PROMINENT WITH 3 X 500 LITER PVC TANKS - MASH FILTER NORDON, 53 PLATES, 1997 - WORT COLLECTING TANK, HORIZONTAL, 410 HL - WORT KETTLE HUPPMANN, 930 HL, 5200 MM DIAMETER, THE HEATING BOILER SURFACE - 55 M2, 2002. BOILING OF THE WORT RUNS AT HIGH PRESSURE THAT ALLOWS TO REACH TEMPERATURE OF 104 - 106 C, - HOP DOSING TANKS, HUPPMANN 3 X 235 LITERS, YEAR 1998 - HEAT EXCHANGER OF WORT KETTLE, APV TYPE K55,YEAR 1998 - WHIRLPOOL HUPPMANN, 650 HL, DIAMETER 5800 MM, YEAR 2002 - PRESS-FILTER BUFFER TANKS, HUPPMANN, 1999 - TANK FOR COLLECTING PROTEIN - PIPING, PUMPS, VALVES, ETC. - COMPUTER CONTROL SYSTEM OF BREWHOUSE BASED ON THE PC.
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-; gross weight [kg]: 6200; rear tyres remaining: 100; front tyres remaining: 100; maximum lift capacity [kg]: 230 ; GROSS WEIGHT [KG]: 6200; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; MAXIMUM LIFT CAPACITY [KG]: 230
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more FRIULAIR types: