671 ofertas

Año de construcción: usado
Ubicación: Land-used sausage / cheese slicer weber, type: mcs 902

- build-in: 07 / 1999

slicer weber, type: slicer mcs 902
- gripper for 3 x 100 caliber and 2 x 135 caliber
- mono weigher
- automatic loading
- down holder
- 450 mm circular knife

infeeder weber, type: cca
- cross spreader 
- spreading of 2 products to 3 rows
- grouping conveyors
- buffer conveyor
- automatic infeeder

the line is in operation since to december 2018. inspection and test run are possible at every time. USED SAUSAGE / CHEESE SLICER WEBER, TYPE: MCS 902 - BUILD-IN: 07 / 1999 SLICER WEBER, TYPE: SLICER MCS 902 - GRIPPER FOR 3 X 100 CALIBER AND 2 X 135 CALIBER - MONO WEIGHER - AUTOMATIC LOADING - DOWN HOLDER - 450 MM CIRCULAR KNIFE INFEEDER WEBER, TYPE: CCA - CROSS SPREADER - SPREADING OF 2 PRODUCTS TO 3 ROWS - GROUPING CONVEYORS - BUFFER CONVEYOR - AUTOMATIC INFEEDER THE LINE IS IN OPERATION SINCE TO DECEMBER 2018. INSPECTION AND TEST RUN ARE POSSIBLE AT EVERY TIME.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-cutting length max.: 4.100mm
plate thickness max.: 6,5mm
cutting angle max.: 1,15°
way back gauge: 1.000mm
number of downholders: 16
required power: 18,5kw

equipment:
- in front usable motorized back gauge with diagonal positioning
- cutting kerf fast adjustment
- 1x lateral stop
- 4x front lay-on arms
- replacement blades
- foot switch CUTTING LENGTH MAX.: 4.100MM PLATE THICKNESS MAX.: 6,5MM CUTTING ANGLE MAX.: 1,15° WAY BACK GAUGE: 1.000MM NUMBER OF DOWNHOLDERS: 16 REQUIRED POWER: 18,5KW EQUIPMENT: - IN FRONT USABLE MOTORIZED BACK GAUGE WITH DIAGONAL POSITIONING - CUTTING KERF FAST ADJUSTMENT - 1X LATERAL STOP - 4X FRONT LAY-ON ARMS - REPLACEMENT BLADES - FOOT SWITCH
Vendedor: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE
Año de construcción: usado
Ubicación: Land-cylinder 30 l, cylinder inside stainless steel\r\n          dimensions: d 310 mm, h 400 mm CYLINDER 30 L, CYLINDER INSIDE STAINLESS STEEL\R\N DIMENSIONS: D 310 MM, H 400 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 2.195 €
Ubicación: Land-tgw curve roller conveyor 90 â° left
pos. 03.722
year of construction: 2012
nb: 420 mm
usable width: 345 mm plastic rollers
usable width: 400 mm metal rollers
inner radius: 1050 mm
speed: 0.45 m/sec

guide on both sides

rolls: conical plastic molding
role: metal

without the posts! optional: 3 supports a' â?¬ 69.00

shipping dimensions: lxwxh 2200 x 800 x 400 mm

weight: 110 kg
 TGW CURVE ROLLER CONVEYOR 90 ° LEFT POS. 03.722 YEAR OF CONSTRUCTION: 2012 NB: 420 MM USABLE WIDTH: 345 MM PLASTIC ROLLERS USABLE WIDTH: 400 MM METAL ROLLERS INNER RADIUS: 1050 MM SPEED: 0.45 M/SEC GUIDE ON BOTH SIDES ROLLS: CONICAL PLASTIC MOLDING ROLE: METAL WITHOUT THE POSTS! OPTIONAL: 3 SUPPORTS A' Â?¬ 69.00 SHIPPING DIMENSIONS: LXWXH 2200 X 800 X 400 MM WEIGHT: 110 KG
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Ubicación: Land-cutting diameter: 105 mm<br/>saw band length: 1140 x 13 x 0,65 mm<br/>cutting width: 100/100x105 mm<br/>capacity 60 degrees: round:  mm<br/>capacity 45 degrees: flat: 55 x 55 mm<br/>capacity 45 degrees: round: 60 mm<br/>total power requirement: 0,18 kw<br/>weight of the machine ca.: 18 kg<br/>dimensions of the machine ca.: ca.400 x 300 x 350 mm<br/>14322<br/><br/>- gear drive<br/>- adjustable belt speed 20 - 100 m/min<br/>- automatic belt tension<br/>- lightweight and therefore usable as mobile unit<br/><br/><br/><br/><br/> CUTTING DIAMETER: 105 MM
SAW BAND LENGTH: 1140 X 13 X 0,65 MM
CUTTING WIDTH: 100/100X105 MM
CAPACITY 60 DEGREES: ROUND: MM
CAPACITY 45 DEGREES: FLAT: 55 X 55 MM
CAPACITY 45 DEGREES: ROUND: 60 MM
TOTAL POWER REQUIREMENT: 0,18 KW
WEIGHT OF THE MACHINE CA.: 18 KG
DIMENSIONS OF THE MACHINE CA.: CA.400 X 300 X 350 MM
14322

- GEAR DRIVE
- ADJUSTABLE BELT SPEED 20 - 100 M/MIN
- AUTOMATIC BELT TENSION
- LIGHTWEIGHT AND THEREFORE USABLE AS MOBILE UNIT




Vendedor: Ralf Schmeißer Werkzeugmaschinen
Año de construcción: usado
Precio: 2.195 €
Ubicación: Land-tgw curve roller conveyor 90 â° right with straight piece 1000 mm
flat belt drive tc-20ef
pos. 03.703
year of construction: 2012
order: 150072
nb: 420 mm
usable width: 345 mm plastic rollers
usable width: 400 mm metal rollers
nr: 1050 mm
id.nr. 00312309

guide on both sides

rolls: conical plastic molding
role: metal

without the posts! optional: 3 supports a' â?¬ 69.00

shipping dimensions: lxwxh 2300 x 1200 x 400 mm

weight: 120 kg TGW CURVE ROLLER CONVEYOR 90 &ACIRC;&DEG; RIGHT WITH STRAIGHT PIECE 1000 MM FLAT BELT DRIVE TC-20EF POS. 03.703 YEAR OF CONSTRUCTION: 2012 ORDER: 150072 NB: 420 MM USABLE WIDTH: 345 MM PLASTIC ROLLERS USABLE WIDTH: 400 MM METAL ROLLERS NR: 1050 MM ID.NR. 00312309 GUIDE ON BOTH SIDES ROLLS: CONICAL PLASTIC MOLDING ROLE: METAL WITHOUT THE POSTS! OPTIONAL: 3 SUPPORTS A' &ACIRC;?&NOT; 69.00 SHIPPING DIMENSIONS: LXWXH 2300 X 1200 X 400 MM WEIGHT: 120 KG
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Ubicación: Land-vedgetable cutter, make urschel laboratories inc., type n, no 225, material stainless steel, rotor sizes dia. 90 x 270 mm, strip cutter, with motor 0,55 kw, 380 volt, with variable speed drive, with hopper 320 x 220 mm, mounted on frame, mounted on wheels, with switchgear, floorspace 1,5 x 0,9 m, total height 1,9 m, weight 280 kgvegetable cuttersgrinders > vegetable cutters VEDGETABLE CUTTER, MAKE URSCHEL LABORATORIES INC., TYPE N, NO 225, MATERIAL STAINLESS STEEL, ROTOR SIZES DIA. 90 X 270 MM, STRIP CUTTER, WITH MOTOR 0,55 KW, 380 VOLT, WITH VARIABLE SPEED DRIVE, WITH HOPPER 320 X 220 MM, MOUNTED ON FRAME, MOUNTED ON WHEELS, WITH SWITCHGEAR, FLOORSPACE 1,5 X 0,9 M, TOTAL HEIGHT 1,9 M, WEIGHT 280 KGVEGETABLE CUTTERSGRINDERS > VEGETABLE CUTTERS
Vendedor: Foeth
Año de construcción: usado
Precio: 2.100 €
Ubicación: Land-pneumatic ham press / meat & sausage press

inject star

technical data:

type: fwp-14
    to the presses of raw & length software
    completely made of stainless steel
    capacity up to 400 kg
    pressure generation by means of pneumatic system
    air pressure connection at least 4 bar / maximum 12 bar
    pressing force up to 950 kg
    all-inclusive 14 stainless steel insert panels & 35 plates of kant
    mobile on 4 wheels
    curb weight approx. 200 kg
    dimensions exterior h132 total x t43 x b160 cm
    dimensions board: h101 x b93 x t35 cm
    purchase price incl.19% vat a regular invoice will be issued!

see state original images!  PNEUMATIC HAM PRESS / MEAT & SAUSAGE PRESS INJECT STAR TECHNICAL DATA: TYPE: FWP-14 TO THE PRESSES OF RAW & LENGTH SOFTWARE COMPLETELY MADE OF STAINLESS STEEL CAPACITY UP TO 400 KG PRESSURE GENERATION BY MEANS OF PNEUMATIC SYSTEM AIR PRESSURE CONNECTION AT LEAST 4 BAR / MAXIMUM 12 BAR PRESSING FORCE UP TO 950 KG ALL-INCLUSIVE 14 STAINLESS STEEL INSERT PANELS & 35 PLATES OF KANT MOBILE ON 4 WHEELS CURB WEIGHT APPROX. 200 KG DIMENSIONS EXTERIOR H132 TOTAL X T43 X B160 CM DIMENSIONS BOARD: H101 X B93 X T35 CM PURCHASE PRICE INCL.19% VAT A REGULAR INVOICE WILL BE ISSUED! SEE STATE ORIGINAL IMAGES!
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-vertical pressure tank high pressure vessel (1x), make parr instruments co. usa, type 4740-1111-24275, new 2011, material hastelloy c, capacity 0,075 ltr, vessel sizes dia. 25x150mm, with cover, working pressure 585 bar, test pressure 1110 bar, max. temperature 350 degr. c., with switchgear (parr reactor controller model 4838), floorspace 0,5x0,4 m, total height 0,8 m, weight 15 kg, extra specifications - with electric heating (700 watt), parr heater assembly model 4921pressure vesselstanks > pressure vessels VERTICAL PRESSURE TANK HIGH PRESSURE VESSEL (1X), MAKE PARR INSTRUMENTS CO. USA, TYPE 4740-1111-24275, NEW 2011, MATERIAL HASTELLOY C, CAPACITY 0,075 LTR, VESSEL SIZES DIA. 25X150MM, WITH COVER, WORKING PRESSURE 585 BAR, TEST PRESSURE 1110 BAR, MAX. TEMPERATURE 350 DEGR. C., WITH SWITCHGEAR (PARR REACTOR CONTROLLER MODEL 4838), FLOORSPACE 0,5X0,4 M, TOTAL HEIGHT 0,8 M, WEIGHT 15 KG, EXTRA SPECIFICATIONS - WITH ELECTRIC HEATING (700 WATT), PARR HEATER ASSEMBLY MODEL 4921PRESSURE VESSELSTANKS > PRESSURE VESSELS
Vendedor: Foeth
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-meng machine for sausage meat

dadaux

facilities:

machine made of stainless steel
    bowl contents up to 60 litres
    dimensions of machine with the lid closed: height 114 x width 65 x depth 95 cm

technical data rating plate:
    400v / 50 hz / bj. 2003
    16 amper cee plug
    folding bowl
    the bowl can be determined -.
    or will displace out of the mixture by the fork powered
    meng header folding
    function checked, machine is ready for use immediately

see pictures original condition & accessories!

if you have questions, email or call. MENG MACHINE FOR SAUSAGE MEAT DADAUX FACILITIES: MACHINE MADE OF STAINLESS STEEL BOWL CONTENTS UP TO 60 LITRES DIMENSIONS OF MACHINE WITH THE LID CLOSED: HEIGHT 114 X WIDTH 65 X DEPTH 95 CM TECHNICAL DATA RATING PLATE: 400V / 50 HZ / BJ. 2003 16 AMPER CEE PLUG FOLDING BOWL THE BOWL CAN BE DETERMINED -. OR WILL DISPLACE OUT OF THE MIXTURE BY THE FORK POWERED MENG HEADER FOLDING FUNCTION CHECKED, MACHINE IS READY FOR USE IMMEDIATELY SEE PICTURES ORIGINAL CONDITION & ACCESSORIES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-piston homogeniser (1x), make manton-gaulin mfg co. usa, type 15m-8ba smd, no 828596878, material stainless steel, capacity ± 50 ltr/hr (15 gallon p/hr), pressure max. 650 bar (10.000 psi), number of pistons: 1, motor 1,5 kw, 220/380 volt, with switch, floorspace 1,0x0,6 m, total height 1,3 m, weight 240 kgpiston homogenisersgrinders > piston homogenisers PISTON HOMOGENISER (1X), MAKE MANTON-GAULIN MFG CO. USA, TYPE 15M-8BA SMD, NO 828596878, MATERIAL STAINLESS STEEL, CAPACITY ± 50 LTR/HR (15 GALLON P/HR), PRESSURE MAX. 650 BAR (10.000 PSI), NUMBER OF PISTONS: 1, MOTOR 1,5 KW, 220/380 VOLT, WITH SWITCH, FLOORSPACE 1,0X0,6 M, TOTAL HEIGHT 1,3 M, WEIGHT 240 KGPISTON HOMOGENISERSGRINDERS > PISTON HOMOGENISERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-forming roll for elevator guide rail


usage:cold forming for elevator guide rail

quantity:2lines

make:nakata(japan)

manufacturing year:1982

the number of stand: 10

product size: 4.5mm x 300mm

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 FORMING ROLL FOR ELEVATOR GUIDE RAIL USAGE:COLD FORMING FOR ELEVATOR GUIDE RAIL QUANTITY:2LINES MAKE:NAKATA(JAPAN) MANUFACTURING YEAR:1982 THE NUMBER OF STAND: 10 PRODUCT SIZE: 4.5MM X 300MM BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-scraped surface heat exchanger (1x), make alfa laval newburyport usa, type convap 6x4 scraped surface evaporator, no hc-2917 scn, new 1985, heating surface 0,36 m2, cylinder sizes dia. 155x600mm, working pressure 31 bar (450 psi), max. temperature 157 degr. c. (315 fahrenheit), with jacket, working pressure 15,5 bar (225 psi), inlet dia. 150mm, outlet dia. 50mm, motor 5,5 kw, 380 volt, floorspace 1,3x0,7 m, total height 2,2 m, weight 340 kgscraped surface heatexchangersheat exchangers > scraped surface heatexchangers SCRAPED SURFACE HEAT EXCHANGER (1X), MAKE ALFA LAVAL NEWBURYPORT USA, TYPE CONVAP 6X4 SCRAPED SURFACE EVAPORATOR, NO HC-2917 SCN, NEW 1985, HEATING SURFACE 0,36 M2, CYLINDER SIZES DIA. 155X600MM, WORKING PRESSURE 31 BAR (450 PSI), MAX. TEMPERATURE 157 DEGR. C. (315 FAHRENHEIT), WITH JACKET, WORKING PRESSURE 15,5 BAR (225 PSI), INLET DIA. 150MM, OUTLET DIA. 50MM, MOTOR 5,5 KW, 380 VOLT, FLOORSPACE 1,3X0,7 M, TOTAL HEIGHT 2,2 M, WEIGHT 340 KGSCRAPED SURFACE HEATEXCHANGERSHEAT EXCHANGERS > SCRAPED SURFACE HEATEXCHANGERS
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-injection molding machines/vacuum coating machines

 usages:automotive parts, electronics parts




(main equipment)

-injection molding machines(9sets)

-vacuum coating machines(2sets)

- injection automation machines(11sets)

 

1. injection molding machine

make:dongshin(korea)

year:2015 

model: pro dima 170mc 

cap': 170ton

stroke: 220mm

tiebar distance(h,v): 520×520mm

 

2.  injection molding machine x3sets

make:dongshin(korea)

year:2015

 model: pro dima 220mc 

cap': 220ton 

stroke: 250mm 

tiebar distance(h,v): 560×490mm

 

3.  injection molding machine

make:dongshin(korea)

year:2015

model: pro dima 380mc

cap': 380ton

stroke: 300mm

tiebar distance(h,v): 710×710mm

 

4.  injection molding machine x3sets

make:dongshin(korea)

year:2015

model: pro dima 450mc

cap': 450ton 

stroke: 320mm 

tiebar distance(  h,v): 790×740mm

 

5.  injection molding machine

make:dongshin(korea)

year:2015

model: pro dima 550mc 

cap': 550ton

stroke: 364mm

tiebar distance(h,v): 900×760mm

 

6.  injection molding machine

make:dongshin(korea)

year:2015

model: pro dima 650mc 

cap': 650ton

stroke: 430mm

tiebar distance(h,v): 970×970mm

 

7. injection automation system

make:daehan(korea)

year:2015

for 170ton 

? robot

   model:zest-200s

   3 axis servo type

? hopper dryer

   model:dhd-10

   cap:50kg

? hopper loader

   model:dhl-300

   cap:2.2kw

? material tank:50kg

? hot runner con't:6zone

? mold temp. controller

?  conveyor:   (w)400×(l)4,000m/m

? workstation:   1500×750×1700m/m

 

8. injection automation system x3sets

make:daehan(korea)

year:2015

for 220ton

? robot

   model:zest-200s

   3 axis servo type

? hopper dryer

   model:dhd-20

   cap:100kg

? hopper loader

   model:dhl-300

   cap:2.2kw

? material box:50kg

? hot runner con't:6zone

? mold temp. controllerx 2set

? conveyor   (w)400×(l)4,000m/m

? workstation   1500×750×1700m/m

 

 9. injection automation system

make:daehan(korea)

year:2015

for 380ton

? robot

   model:zest-300s

   3 axis servo type

? hopper dryer

   model:dhd-30

   cap:150kg

? hopper loader

   model:dhl-300

   cap:2.2kw

? material box:150kg

? hot runner con't:6zone

 ? mold temp. controller

? conveyor   (w)600×(l)5,000m/m

? workstation   1500×750×1700m/m



10. injection automation system x3set

make:daehan(korea)

year:2015

for 450ton

? robot

   model:nexia-400s

   3 axis servo type

? hopper dryer  cap:150kg

? hopper loader

   model:dhl-300

   cap:2.2kw

? material box:200kg

? hot runner con't:6zone

? mold temp. controller

   model:spc-60 × 2set

? conveyor   (w)600×(l)5,000m/m

? workstation   1500×750×1700m/m

 

11. injection automation system

make:daehan(korea)

year:2015

for 550ton 

? robot

   model:nexia-e-600s

   3 axis servo type

? hopper dryer

cap:200kg

? hopper loader

   model:dhl-500

   cap:3.7kw

? material box:300kg

? hot runner con't:6zone

? mold temp. controller

   model:spc-60 × 2set

? conveyor

   (w)600×(l)5,000m/m

? workstation

   1500×750×1700m/m


12. injection automation system

make:daehan(korea)

year:2015

for 650ton 

? robot

   model:nexia-e-600s

   3 axis servo type

? hopper dryer

cap:250kg

? hopper loader

   model:dhl-500

   cap:3.7kw

? materiasl box:400kg

? hot runner con't:6zone

? mold temp. controller

 ?  conveyor   (w)600×(l)5,000m/m

?workstation   1500×750×1700m/m

 

13. injection automation system

make:daehan(korea)

year:2015

common equipment

? over dryer

   dhd-10

? mold pre-heater

   sac-100

? hot runner con't:2zone

 

14. vacuum coating system

make:interteck(korea)

year:2015

model:gves-v150

2 door type

chamber size: Ø1,500×1,800mml

jig size:Ø1,350×1,250mml

consist of

 oil rotary & booster pump

 diffusion pump

 poly cold

 vacuum valve

 auto chiller

 control panel 

 

15. vacuum coating system

make:interteck(korea)

year:2015

 model:gves-v150

2 door type

chamber size: Ø1,500×1,800mml

jig size:Ø1,350×1,250mml

consist of

 oil rotary & booster pump

 diffusion pump

 poly cold

 vacuum valve

 auto chiller

 control panel 

 

16. air compressor 

make:hanshin(korea)

year:2015

1)compressor

   model:grh3-35ac × 2set

2)air dryer

   model:hrd-50ht

3)receiver tank:1.1?

4)line filter

 
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567


 INJECTION MOLDING MACHINES/VACUUM COATING MACHINES USAGES:AUTOMOTIVE PARTS, ELECTRONICS PARTS (MAIN EQUIPMENT) -INJECTION MOLDING MACHINES(9SETS) -VACUUM COATING MACHINES(2SETS) - INJECTION AUTOMATION MACHINES(11SETS) 1. INJECTION MOLDING MACHINE MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 170MC CAP': 170TON STROKE: 220MM TIEBAR DISTANCE(H,V): 520×520MM 2. INJECTION MOLDING MACHINE X3SETS MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 220MC CAP': 220TON STROKE: 250MM TIEBAR DISTANCE(H,V): 560×490MM 3. INJECTION MOLDING MACHINE MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 380MC CAP': 380TON STROKE: 300MM TIEBAR DISTANCE(H,V): 710×710MM 4. INJECTION MOLDING MACHINE X3SETS MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 450MC CAP': 450TON STROKE: 320MM TIEBAR DISTANCE( H,V): 790×740MM 5. INJECTION MOLDING MACHINE MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 550MC CAP': 550TON STROKE: 364MM TIEBAR DISTANCE(H,V): 900×760MM 6. INJECTION MOLDING MACHINE MAKE:DONGSHIN(KOREA) YEAR:2015 MODEL: PRO DIMA 650MC CAP': 650TON STROKE: 430MM TIEBAR DISTANCE(H,V): 970×970MM 7. INJECTION AUTOMATION SYSTEM MAKE:DAEHAN(KOREA) YEAR:2015 FOR 170TON ? ROBOT MODEL:ZEST-200S 3 AXIS SERVO TYPE ? HOPPER DRYER MODEL:DHD-10 CAP:50KG ? HOPPER LOADER MODEL:DHL-300 CAP:2.2KW ? MATERIAL TANK:50KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLER ? CONVEYOR: (W)400×(L)4,000M/M ? WORKSTATION: 1500×750×1700M/M 8. INJECTION AUTOMATION SYSTEM X3SETS MAKE:DAEHAN(KOREA) YEAR:2015 FOR 220TON ? ROBOT MODEL:ZEST-200S 3 AXIS SERVO TYPE ? HOPPER DRYER MODEL:DHD-20 CAP:100KG ? HOPPER LOADER MODEL:DHL-300 CAP:2.2KW ? MATERIAL BOX:50KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLERX 2SET ? CONVEYOR (W)400×(L)4,000M/M ? WORKSTATION 1500×750×1700M/M 9. INJECTION AUTOMATION SYSTEM MAKE:DAEHAN(KOREA) YEAR:2015 FOR 380TON ? ROBOT MODEL:ZEST-300S 3 AXIS SERVO TYPE ? HOPPER DRYER MODEL:DHD-30 CAP:150KG ? HOPPER LOADER MODEL:DHL-300 CAP:2.2KW ? MATERIAL BOX:150KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLER ? CONVEYOR (W)600×(L)5,000M/M ? WORKSTATION 1500×750×1700M/M 10. INJECTION AUTOMATION SYSTEM X3SET MAKE:DAEHAN(KOREA) YEAR:2015 FOR 450TON ? ROBOT MODEL:NEXIA-400S 3 AXIS SERVO TYPE ? HOPPER DRYER CAP:150KG ? HOPPER LOADER MODEL:DHL-300 CAP:2.2KW ? MATERIAL BOX:200KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLER MODEL:SPC-60 × 2SET ? CONVEYOR (W)600×(L)5,000M/M ? WORKSTATION 1500×750×1700M/M 11. INJECTION AUTOMATION SYSTEM MAKE:DAEHAN(KOREA) YEAR:2015 FOR 550TON ? ROBOT MODEL:NEXIA-E-600S 3 AXIS SERVO TYPE ? HOPPER DRYER CAP:200KG ? HOPPER LOADER MODEL:DHL-500 CAP:3.7KW ? MATERIAL BOX:300KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLER MODEL:SPC-60 × 2SET ? CONVEYOR (W)600×(L)5,000M/M ? WORKSTATION 1500×750×1700M/M 12. INJECTION AUTOMATION SYSTEM MAKE:DAEHAN(KOREA) YEAR:2015 FOR 650TON ? ROBOT MODEL:NEXIA-E-600S 3 AXIS SERVO TYPE ? HOPPER DRYER CAP:250KG ? HOPPER LOADER MODEL:DHL-500 CAP:3.7KW ? MATERIASL BOX:400KG ? HOT RUNNER CON'T:6ZONE ? MOLD TEMP. CONTROLLER ? CONVEYOR (W)600×(L)5,000M/M ?WORKSTATION 1500×750×1700M/M 13. INJECTION AUTOMATION SYSTEM MAKE:DAEHAN(KOREA) YEAR:2015 COMMON EQUIPMENT ? OVER DRYER DHD-10 ? MOLD PRE-HEATER SAC-100 ? HOT RUNNER CON'T:2ZONE 14. VACUUM COATING SYSTEM MAKE:INTERTECK(KOREA) YEAR:2015 MODEL:GVES-V150 2 DOOR TYPE CHAMBER SIZE: Ø1,500×1,800MML JIG SIZE:Ø1,350×1,250MML CONSIST OF OIL ROTARY & BOOSTER PUMP DIFFUSION PUMP POLY COLD VACUUM VALVE AUTO CHILLER CONTROL PANEL 15. VACUUM COATING SYSTEM MAKE:INTERTECK(KOREA) YEAR:2015 MODEL:GVES-V150 2 DOOR TYPE CHAMBER SIZE: Ø1,500×1,800MML JIG SIZE:Ø1,350×1,250MML CONSIST OF OIL ROTARY & BOOSTER PUMP DIFFUSION PUMP POLY COLD VACUUM VALVE AUTO CHILLER CONTROL PANEL 16. AIR COMPRESSOR MAKE:HANSHIN(KOREA) YEAR:2015 1)COMPRESSOR MODEL:GRH3-35AC × 2SET 2)AIR DRYER MODEL:HRD-50HT 3)RECEIVER TANK:1.1? 4)LINE FILTER BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: 840 d sl shopturn  siemens<br/>centre height: 190 mm<br/>standard turning dia.: 200 mm<br/>turning diameter over bed: 330 mm<br/>turning dia. over face-slide: 260 mm<br/>main spindle::  <br/>turning speed range - main spindle: max. 5.000 min/-1<br/>power capacity - main spindel: 16,5 / 11 kw<br/>max. torque: 166,5 nm<br/>usable bar diameter: - mm<br/>max. bar capacity: 65 mm<br/>spindle bore: 82,5 mm<br/>spindle diameter in front bearing: 120 mm<br/>max. chucking diameter: 210 mm<br/>chucking diameter: - mm<br/>c-axis: 0,04 °<br/>axis stroke::  <br/>travel -x axis: 160 mm<br/>travel -z axis: 450 mm<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>tool taper: vdi 30 <br/>switching time: 30° : 0,37 sec<br/>number of driven toolspositions: 6 pos.<br/>tailstock::  <br/>tailstock adjustment: 400 mm<br/>intake pressure max.: 4.000 n<br/>feeds::  <br/>rapid traverse: x: 20 / z: 30 m/min<br/>feed force ( x / z ): 4,5 kn<br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,2 t<br/>dimensions of the machine ca.: 5,0 x 2,2 x 1,8 m<br/>chip conveyor:  <br/>c-axis:  <br/>tool drive mechanisum:  <br/>coolantsystem:  <br/>tailstock:  <br/>signal-light:  <br/>turret:  <br/>bar feeder: hydrofeed <br/>parts catcher:  <br/>cnc - turning- and millingcenter<br/>dmg mori - ctx 310 eco v3<br/><br/>- incl. bar-feeder<br/>- without tools !<br/><br/><br/> <br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: 840 D SL SHOPTURN SIEMENS
CENTRE HEIGHT: 190 MM
STANDARD TURNING DIA.: 200 MM
TURNING DIAMETER OVER BED: 330 MM
TURNING DIA. OVER FACE-SLIDE: 260 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 16,5 / 11 KW
MAX. TORQUE: 166,5 NM
USABLE BAR DIAMETER: - MM
MAX. BAR CAPACITY: 65 MM
SPINDLE BORE: 82,5 MM
SPINDLE DIAMETER IN FRONT BEARING: 120 MM
MAX. CHUCKING DIAMETER: 210 MM
CHUCKING DIAMETER: - MM
C-AXIS: 0,04 °
AXIS STROKE::
TRAVEL -X AXIS: 160 MM
TRAVEL -Z AXIS: 450 MM
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SWITCHING TIME: 30° : 0,37 SEC
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 400 MM
INTAKE PRESSURE MAX.: 4.000 N
FEEDS::
RAPID TRAVERSE: X: 20 / Z: 30 M/MIN
FEED FORCE ( X / Z ): 4,5 KN
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,2 T
DIMENSIONS OF THE MACHINE CA.: 5,0 X 2,2 X 1,8 M
CHIP CONVEYOR:
C-AXIS:
TOOL DRIVE MECHANISUM:
COOLANTSYSTEM:
TAILSTOCK:
SIGNAL-LIGHT:
TURRET:
BAR FEEDER: HYDROFEED
PARTS CATCHER:
CNC - TURNING- AND MILLINGCENTER
DMG MORI - CTX 310 ECO V3

- INCL. BAR-FEEDER
- WITHOUT TOOLS !







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-pressa piegatrice ermaksan 3100 x 175 ton 2010 usata

lunghezza di piegatura 3100

bgehezk8
potenza 175 ton

peso del macchinario 9500kg

approach speed 200 mm / s

motor power 30 kw

voltage 380 v

width 2200mm

height 277o mm PRESSA PIEGATRICE ERMAKSAN 3100 X 175 TON 2010 USATA LUNGHEZZA DI PIEGATURA 3100 BGEHEZK8 POTENZA 175 TON PESO DEL MACCHINARIO 9500KG APPROACH SPEED 200 MM / S MOTOR POWER 30 KW VOLTAGE 380 V WIDTH 2200MM HEIGHT 277O MM
Vendedor: Pellitteri Macchine Utensili srl
Año de construcción: usado
Ubicación: Land-turning diameter: max. 260 mm<br/>turning length: 450 mm<br/>control: 840 d sl shopturn  siemens<br/>centre height: 190 mm<br/>standard turning dia.: 200 mm<br/>turning diameter over bed: 330 mm<br/>turning dia. over face-slide: 260 mm<br/>main spindle::  <br/>turning speed range - main spindle: max. 5.000 min/-1<br/>power capacity - main spindel: 16,5 / 11 kw<br/>max. torque: 166,5 nm<br/>usable bar diameter: - mm<br/>max. bar capacity: 51 mm<br/>spindle bore: 68,5 mm<br/>spindle diameter in front bearing: 100 mm<br/>max. chucking diameter: 210 mm<br/>chucking diameter: - mm<br/>c-axis: 0,04 °<br/>axis stroke::  <br/>travel -x axis: 160 mm<br/>travel -z axis: 450 mm<br/>turret::  <br/>number of toolpositions: 12 pos.<br/>tool taper: vdi 30 <br/>switching time: 30° : 0,37 sec<br/>number of driven toolspositions: 6 pos.<br/>tailstock::  <br/>tailstock adjustment: 400 mm<br/>intake pressure max.: 4.000 n<br/>feeds::  <br/>rapid traverse: x: 20 / z: 30 m/min<br/>feed force ( x / z ): 4,5 kn<br/>total power requirement: 21 kw<br/>weight of the machine ca.: 3,2 t<br/>dimensions of the machine ca.: 5,0 x 2,2 x 1,8 m<br/>chip conveyor:  <br/>c-axis:  <br/>tool drive mechanisum:  <br/>coolantsystem:  <br/>tailstock:  <br/>signal-light:  <br/>turret:  <br/>cnc - turning- and millingcenter<br/>dmg mori - ctx 310 eco v3<br/><br/><br/> <br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 260 MM
TURNING LENGTH: 450 MM
CONTROL: 840 D SL SHOPTURN SIEMENS
CENTRE HEIGHT: 190 MM
STANDARD TURNING DIA.: 200 MM
TURNING DIAMETER OVER BED: 330 MM
TURNING DIA. OVER FACE-SLIDE: 260 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 16,5 / 11 KW
MAX. TORQUE: 166,5 NM
USABLE BAR DIAMETER: - MM
MAX. BAR CAPACITY: 51 MM
SPINDLE BORE: 68,5 MM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
MAX. CHUCKING DIAMETER: 210 MM
CHUCKING DIAMETER: - MM
C-AXIS: 0,04 °
AXIS STROKE::
TRAVEL -X AXIS: 160 MM
TRAVEL -Z AXIS: 450 MM
TURRET::
NUMBER OF TOOLPOSITIONS: 12 POS.
TOOL TAPER: VDI 30
SWITCHING TIME: 30° : 0,37 SEC
NUMBER OF DRIVEN TOOLSPOSITIONS: 6 POS.
TAILSTOCK::
TAILSTOCK ADJUSTMENT: 400 MM
INTAKE PRESSURE MAX.: 4.000 N
FEEDS::
RAPID TRAVERSE: X: 20 / Z: 30 M/MIN
FEED FORCE ( X / Z ): 4,5 KN
TOTAL POWER REQUIREMENT: 21 KW
WEIGHT OF THE MACHINE CA.: 3,2 T
DIMENSIONS OF THE MACHINE CA.: 5,0 X 2,2 X 1,8 M
CHIP CONVEYOR:
C-AXIS:
TOOL DRIVE MECHANISUM:
COOLANTSYSTEM:
TAILSTOCK:
SIGNAL-LIGHT:
TURRET:
CNC - TURNING- AND MILLINGCENTER
DMG MORI - CTX 310 ECO V3







Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-
calandra imcar 4 rulli anno 2007 usata 2.2kw

anno di costruzione macchinario 2007

potenza 2.2 kw CALANDRA IMCAR 4 RULLI ANNO 2007 USATA 2.2KW ANNO DI COSTRUZIONE MACCHINARIO 2007 POTENZA 2.2 KW
Vendedor: Pellitteri Macchine Utensili srl
Año de construcción: usado
Precio: used machinery auction RESALE 120 €
Ubicación: Land-weight approx.: 70 kg<br/>dimensions (l x w x h) approx.: 3200 x 430 x 2450 mm<br/>description: laterally usable material storage space 150 x 3000 x 2300 mm WEIGHT APPROX.: 70 KG
DIMENSIONS (L X W X H) APPROX.: 3200 X 430 X 2450 MM
DESCRIPTION: LATERALLY USABLE MATERIAL STORAGE SPACE 150 X 3000 X 2300 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-encrusting machine
year of construction: 2000
weight range 10 - 300g
movable
usable for many filled and undfilled products
incl. 2 inner nozzles: depends on availability
incl. 2 outer nozzle: depends on availability
incl. 1 shutter: depends on availability

optional available 
solid feeder (filling tool to fill products with fruits or eggs etc

on request we will send you our offer you  ENCRUSTING MACHINE YEAR OF CONSTRUCTION: 2000 WEIGHT RANGE 10 - 300G MOVABLE USABLE FOR MANY FILLED AND UNDFILLED PRODUCTS INCL. 2 INNER NOZZLES: DEPENDS ON AVAILABILITY INCL. 2 OUTER NOZZLE: DEPENDS ON AVAILABILITY INCL. 1 SHUTTER: DEPENDS ON AVAILABILITY OPTIONAL AVAILABLE SOLID FEEDER (FILLING TOOL TO FILL PRODUCTS WITH FRUITS OR EGGS ETC ON REQUEST WE WILL SEND YOU OUR OFFER YOU
Vendedor: Bakers Good GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.200 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 1250 x 1000 x 1850 mm<br/>description: serial number 9405 e. for pipes 88.9 x 3.2 - 3 gas (3.5), shaft diameter 60 mm, roller diameter 215 mm, 6 rpm, machine is usable horizontally and vertically, german documentation, accessories as usual except roller set. the machine is equipped with hydraulic upper roller adjustment in the range from approx. 80 mm, separate operating panel for roller height adjustment, digital readout, with additional set of profile rollers WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 1250 X 1000 X 1850 MM
DESCRIPTION: SERIAL NUMBER 9405 E. FOR PIPES 88.9 X 3.2 - 3 GAS (3.5), SHAFT DIAMETER 60 MM, ROLLER DIAMETER 215 MM, 6 RPM, MACHINE IS USABLE HORIZONTALLY AND VERTICALLY, GERMAN DOCUMENTATION, ACCESSORIES AS USUAL EXCEPT ROLLER SET. THE MACHINE IS EQUIPPED WITH HYDRAULIC UPPER ROLLER ADJUSTMENT IN THE RANGE FROM APPROX. 80 MM, SEPARATE OPERATING PANEL FOR ROLLER HEIGHT ADJUSTMENT, DIGITAL READOUT, WITH ADDITIONAL SET OF PROFILE ROLLERS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.650 €
Ubicación: Land-meng machine for sausage meat

vakona

type: 150

facilities:

machine made of stainless steel
    1 motor-driven mixing vanes
    1 fixed mixing vanes
    bowl contents up to 150 litres
    free rotating bowl
    plexiglas cover (new)
    dimensions of machine with the lid closed: height 125 x width depth 71 x 103 cm
    bowl diameter: 68 cm
    bowl height: 42 cm

technical data rating plate:
    220/380v / 50 hz / 1,5 kw / 6/3.5 a
    16 amper cee plug
    folding bowl
    meng header folding
    function checked, machine is ready for use immediately

see pictures original condition & accessories!

if you have questions, email or call. MENG MACHINE FOR SAUSAGE MEAT VAKONA TYPE: 150 FACILITIES: MACHINE MADE OF STAINLESS STEEL 1 MOTOR-DRIVEN MIXING VANES 1 FIXED MIXING VANES BOWL CONTENTS UP TO 150 LITRES FREE ROTATING BOWL PLEXIGLAS COVER (NEW) DIMENSIONS OF MACHINE WITH THE LID CLOSED: HEIGHT 125 X WIDTH DEPTH 71 X 103 CM BOWL DIAMETER: 68 CM BOWL HEIGHT: 42 CM TECHNICAL DATA RATING PLATE: 220/380V / 50 HZ / 1,5 KW / 6/3.5 A 16 AMPER CEE PLUG FOLDING BOWL MENG HEADER FOLDING FUNCTION CHECKED, MACHINE IS READY FOR USE IMMEDIATELY SEE PICTURES ORIGINAL CONDITION & ACCESSORIES! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-diameter: mm,passage: 98 mm,width: 90 mm,weight of the machine approx.: 80 kg,dimension l-w-h: Ø 400 x h 140 mm,flange mounting: Ø 330 x 5 mm,clamping range of chuck: max. Ø 380 , min. Ø 5 mm,4 jaw chuck  vierbackenfutter material: stahl inkl. zusatzbacken und futterschlüssel  es sind zwei stück verfügbar. DIAMETER: MM,PASSAGE: 98 MM,WIDTH: 90 MM,WEIGHT OF THE MACHINE APPROX.: 80 KG,DIMENSION L-W-H: Ø 400 X H 140 MM,FLANGE MOUNTING: Ø 330 X 5 MM,CLAMPING RANGE OF CHUCK: MAX. Ø 380 , MIN. Ø 5 MM,4 JAW CHUCK VIERBACKENFUTTER MATERIAL: STAHL INKL. ZUSATZBACKEN UND FUTTERSCHLüSSEL ES SIND ZWEI STüCK VERFüGBAR.
Vendedor: WMW AG
Año de construcción: usado
Precio: 7.400 €
Ubicación: Land-technical data:

brand: elma

type: ti h 160 sf1

year: 2004

technical data:

the cleaning line consists of the following devices:

ultrasonic cleaner type ti-h 160 sf1

rinse tub 160 swi

rinse tub swi 160 (to blow off the parts)

oil separator ã?a 100

filter pump unit fp 250 a

lift and swivel unit incl.

manual slider

abduschen setup

automatic dosing device incl. reservoir

3 piece stainless steel carts type eko / s 160 incl. part usage

documentation

gratings TECHNICAL DATA: BRAND: ELMA TYPE: TI H 160 SF1 YEAR: 2004 TECHNICAL DATA: THE CLEANING LINE CONSISTS OF THE FOLLOWING DEVICES: ULTRASONIC CLEANER TYPE TI-H 160 SF1 RINSE TUB 160 SWI RINSE TUB SWI 160 (TO BLOW OFF THE PARTS) OIL SEPARATOR &ATILDE;?A 100 FILTER PUMP UNIT FP 250 A LIFT AND SWIVEL UNIT INCL. MANUAL SLIDER ABDUSCHEN SETUP AUTOMATIC DOSING DEVICE INCL. RESERVOIR 3 PIECE STAINLESS STEEL CARTS TYPE EKO / S 160 INCL. PART USAGE DOCUMENTATION GRATINGS
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 8000 x 2500 x 2200 mm<br/>description: insulated, with heating, individual dimensions 1st silo 900 x 1500 mm, 2nd and 3rd silo diameter approx. 730 mm, usable height approx. 1200 mm, 4th and 5th silo diameter approx. 650 mm, usable height approx. 850 mm, each silo 1 lower outlet with mechanic slide flap, various pipings diameter approx. 1500 mm, partly with and partly without insulation, 1 metal add-on frame, platform footprint approx. 6000 x 2500 mm, height approx. 3950 mm, 1 dry-air generator motan lx-400, serial number 00010065/000067, dry air volume max. 400 m³/h, heating capacity 9 kw, various attachment parts, device is possibly defective, unchecked, dimensions 1000 x 1250 x 2800 mm, system was partly already pre-dismantled, is still in complete state, it is included a motan control cabinet for drying plant with various control elements, dimensions control cabinet 2000 x 500 x 2000 mm, including mix battery 1180 x 450 x 1000 mm, in total 6 canals, 3 connections per canal, closing caps without piping, control siemens s 5 WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 8000 X 2500 X 2200 MM
DESCRIPTION: INSULATED, WITH HEATING, INDIVIDUAL DIMENSIONS 1ST SILO 900 X 1500 MM, 2ND AND 3RD SILO DIAMETER APPROX. 730 MM, USABLE HEIGHT APPROX. 1200 MM, 4TH AND 5TH SILO DIAMETER APPROX. 650 MM, USABLE HEIGHT APPROX. 850 MM, EACH SILO 1 LOWER OUTLET WITH MECHANIC SLIDE FLAP, VARIOUS PIPINGS DIAMETER APPROX. 1500 MM, PARTLY WITH AND PARTLY WITHOUT INSULATION, 1 METAL ADD-ON FRAME, PLATFORM FOOTPRINT APPROX. 6000 X 2500 MM, HEIGHT APPROX. 3950 MM, 1 DRY-AIR GENERATOR MOTAN LX-400, SERIAL NUMBER 00010065/000067, DRY AIR VOLUME MAX. 400 M³/H, HEATING CAPACITY 9 KW, VARIOUS ATTACHMENT PARTS, DEVICE IS POSSIBLY DEFECTIVE, UNCHECKED, DIMENSIONS 1000 X 1250 X 2800 MM, SYSTEM WAS PARTLY ALREADY PRE-DISMANTLED, IS STILL IN COMPLETE STATE, IT IS INCLUDED A MOTAN CONTROL CABINET FOR DRYING PLANT WITH VARIOUS CONTROL ELEMENTS, DIMENSIONS CONTROL CABINET 2000 X 500 X 2000 MM, INCLUDING MIX BATTERY 1180 X 450 X 1000 MM, IN TOTAL 6 CANALS, 3 CONNECTIONS PER CANAL, CLOSING CAPS WITHOUT PIPING, CONTROL SIEMENS S 5
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: stephan
model: umm sk40 e gni
capacity: 120 kg / h
capacity: 30 litres per batch
volume: 40 litres
maximum temperature: 127 â° c

this is a used stephan umm / sk 40 e vertical machine for cutting, mixing and heating products such as cheese. the machine has a double wall for indirect heating and steam in duesungen in the pan to heat the product directly. the machines are equipped with a high speed cutter, a slowly rotating agitator and a drain valve to remove the product from the pan. it is a batch process by approximately 6-10 minutes per batch MANUFACTURER: STEPHAN MODEL: UMM SK40 E GNI CAPACITY: 120 KG / H CAPACITY: 30 LITRES PER BATCH VOLUME: 40 LITRES MAXIMUM TEMPERATURE: 127 &ACIRC;&DEG; C THIS IS A USED STEPHAN UMM / SK 40 E VERTICAL MACHINE FOR CUTTING, MIXING AND HEATING PRODUCTS SUCH AS CHEESE. THE MACHINE HAS A DOUBLE WALL FOR INDIRECT HEATING AND STEAM IN DUESUNGEN IN THE PAN TO HEAT THE PRODUCT DIRECTLY. THE MACHINES ARE EQUIPPED WITH A HIGH SPEED CUTTER, A SLOWLY ROTATING AGITATOR AND A DRAIN VALVE TO REMOVE THE PRODUCT FROM THE PAN. IT IS A BATCH PROCESS BY APPROXIMATELY 6-10 MINUTES PER BATCH
Vendedor: Merx Handel & Industrie GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 1600 x 3200 x 2400 mm<br/>description: lifting capacity 3900 kg, free lift approx. 1800 mm, incl. charger battery change approx. 2008, read operating hours 3085, limited usability of forklift truck WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 3200 X 2400 MM
DESCRIPTION: LIFTING CAPACITY 3900 KG, FREE LIFT APPROX. 1800 MM, INCL. CHARGER BATTERY CHANGE APPROX. 2008, READ OPERATING HOURS 3085, LIMITED USABILITY OF FORKLIFT TRUCK
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-consisting of: dji osmo + incl. accessories (charger, 2 stk. battery's, additional ext. micro) micro sd hc card lexington 32gbb system case b & w3000 with osmo mobile inserts comments on the condition: slight traces of usage 
CONSISTING OF: DJI OSMO + INCL. ACCESSORIES (CHARGER, 2 STK. BATTERY'S, ADDITIONAL EXT. MICRO) MICRO SD HC CARD LEXINGTON 32GBB SYSTEM CASE B & W3000 WITH OSMO MOBILE INSERTS COMMENTS ON THE CONDITION: SLIGHT TRACES OF USAGE
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Ubicación: Land-manufacturer: brusa, type: lt 80, year: 1995, control: hand, schleifdurchmesser min-max mm: 15-79, automatsche tastung: yes, feeding speed m/min: 4-20, schleifbandbreite mm: 40, schleifbandlänge mm: 2150, kw-leistung schleifmotor: ca.3, number of sanding belts: 1, year :1995 MANUFACTURER: BRUSA, TYPE: LT 80, YEAR: 1995, CONTROL: HAND, SCHLEIFDURCHMESSER MIN-MAX MM: 15-79, AUTOMATSCHE TASTUNG: YES, FEEDING SPEED M/MIN: 4-20, SCHLEIFBANDBREITE MM: 40, SCHLEIFBANDL&AUML;NGE MM: 2150, KW-LEISTUNG SCHLEIFMOTOR: CA.3, NUMBER OF SANDING BELTS: 1, YEAR :1995
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 2.000 €
Ubicación: Land-strip cutter / fleischmã¼rber

bizerba

technical data:

type:-s 111
    230 volt / 50 hz
    all-inclusive 4 inserts
    strip cutter: 5 mm / 5 mm / 10 mm
    steak marker usage
    includes original instruction manual

the machine works fine, see pictures original condition!

if you have questions, email or call. STRIP CUTTER / FLEISCHM&ATILDE;&FRAC14;RBER BIZERBA TECHNICAL DATA: TYPE:-S 111 230 VOLT / 50 HZ ALL-INCLUSIVE 4 INSERTS STRIP CUTTER: 5 MM / 5 MM / 10 MM STEAK MARKER USAGE INCLUDES ORIGINAL INSTRUCTION MANUAL THE MACHINE WORKS FINE, SEE PICTURES ORIGINAL CONDITION! IF YOU HAVE QUESTIONS, EMAIL OR CALL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: woodeye, year: 2005, brettbreite min-max mm: 30-90, brettstärke min-max mm: 20-55, brettlänge min-max mm: 500-5000, holzarten buche kernbuche eiche erle : yes, kanteseiten gesägt: yes, längenoptimierung: yes, breitenoptimierung: yes, farberkunnung: yes, erkennen von rissen und ästen: yes, struckturerkennung: yes, dunkelheit: yes, profilerkennung für baumkanten profilfehler: yes, stärkenerkennung: yes, faseranalyse: yes, zusammen mehrer defekte: yes, erkennung hobelfehler: yes, fleckerkennung: yes, vergeben von klassifizierungsregeln: yes, qualitäten: yes, fixmasse: yes, optimierung veschiedener längen: yes, weitergabe der daten an sägestatuion: yes, modem: yes, statistik produktionsleistung: yes, touchscreen: yes, required space l x w x h mm: 1930 x 1920 x 780,  machine ready for demonstration: ja, year :2005 MANUFACTURER: WOODEYE, YEAR: 2005, BRETTBREITE MIN-MAX MM: 30-90, BRETTST&AUML;RKE MIN-MAX MM: 20-55, BRETTL&AUML;NGE MIN-MAX MM: 500-5000, HOLZARTEN BUCHE KERNBUCHE EICHE ERLE : YES, KANTESEITEN GES&AUML;GT: YES, L&AUML;NGENOPTIMIERUNG: YES, BREITENOPTIMIERUNG: YES, FARBERKUNNUNG: YES, ERKENNEN VON RISSEN UND &AUML;STEN: YES, STRUCKTURERKENNUNG: YES, DUNKELHEIT: YES, PROFILERKENNUNG F&UUML;R BAUMKANTEN PROFILFEHLER: YES, ST&AUML;RKENERKENNUNG: YES, FASERANALYSE: YES, ZUSAMMEN MEHRER DEFEKTE: YES, ERKENNUNG HOBELFEHLER: YES, FLECKERKENNUNG: YES, VERGEBEN VON KLASSIFIZIERUNGSREGELN: YES, QUALIT&AUML;TEN: YES, FIXMASSE: YES, OPTIMIERUNG VESCHIEDENER L&AUML;NGEN: YES, WEITERGABE DER DATEN AN S&AUML;GESTATUION: YES, MODEM: YES, STATISTIK PRODUKTIONSLEISTUNG: YES, TOUCHSCREEN: YES, REQUIRED SPACE L X W X H MM: 1930 X 1920 X 780, MACHINE READY FOR DEMONSTRATION: JA, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-chicken feet processing plant

this is a professional and whole chicken feet peeling production line, easy to operate, high output. the line was used only 4 months and could also be customized according to the requirements of the buyer.

chicken feet peeling production line advantages:
* the machines are all made of stainless steel, wich makes the chicken feet hygiene.
* excellent production quality, easy to operate
* a variety of processing capacity, we can customize it
* stable performance, low cost and labor saving.

the flow chart of the chicken feet peeling line is as follows

1 conveying
2 chicken feet
3 conveying
4 blanching
5 peeling
6 pre-cooling
7 sorting conveyor
8 cutting machine

1 put the chicken paw on the conveyor and transport the chicken feet to the blanching machine.
2 blanching is a necessary part in processing the chicken feet, through disinfect and cook chicken feet, the chicken feet is easy to peeling and it also can protect its natural flavor from being broken.
3 transport the chicken feet to the chicken feet peeling machine for peeling the skin via the conveyor.
4 the last and also core step is peeling, the chicken peeling machine can peeling the chicken feet skin and nail cleanly and there is no damage to chicken feet.
5 spyral type auto feet pre-cooling machine used for cooling chickens, in order to achieve the purpose of detoxification.


location latvia
voltage 400
frequency 50
4 months old
manufactured 2017

for sale the whole line consisting of

1 peeling line

setup in buyers plant available upon request

* for sale is a full set of machines for chicken feet processing.
* an example of average factory scheme in pdf format (drawing) to understand better all process together is available upon request.
* nominal power of this machines are 1 ton per hour, in fact optimal power is 6tn ready product in 8 working hr time.
* all machines goes with 3 phase, 380-400v electricity supply (consumption 21kw/hr)
* for heating purposes steam is needed (500kg/hr, range +130+160c degrees)
* water and drainage supply is needed (min 550 l/ hr)
* people for operation depends dramatically from feet quality.(percentage of black pads to remove) 

here are detailed description:

1. net chain lifting conveyor. main body is from stainless steel 304, net chain type lifting mechanism. chain width 600mm. usage - as supply point to feed scalding machine. 1 pc.

2. net chain chicken feet scalding machine. main body from stainless steel 304, net chain type transmission mechanism. steam pipe connector, automatic temperature controller for steam machine electromagnetic valve. with air supply heat mixer. outlet chute is divided into two parts- for two chicken feet peeling machines. machine dimensions: 5000x1100xh. usage - to blanche raw chicken feet and repair for yellow skin removal. 1 pc.

3. chicken feet peeling machine. main body from stainless steel 304 with food grade rubber peeling fingers inside. equipped with water supply. cleaning programme speed control with frequency controller. usage - for automatic chicken feet yellow skin peeling. length 3200. 2 pc.

4. elevating conveyor. main body from stainless steel 304, belt from 4 mm oil resistant food grade rubber. size 2500x550xh. usage - transporting chicken into cooling tank. 1 pc.

5. chute. usage - between elevating conveyor and cooling tank. main body from stainless steel 304. size 2000x800xh. 1 pc.

6. net chain washing cooling machine. main body from stainless steel 304. belt- net chain type transmission mechanism. with air supply water mixer, with water supply. usage - for chicken feet washing and pre-cooling. size: 6000x1100xh. 1 pc.

7. sorting table - conveyor. main body from stainless steel 304. belt from food grade rubber. usage - for sorting peeled chicken feet and check quality. size 6000x1100xh. 1 pc.

8. feet cutting machine. main body from stainless steel 304. special chicken feet keeping conveyor belt. equipped with 2 chicken feet cutting blades. usage - to cut chicken feet ankle part to make paws. 2 pc.

9. electricity controller (on/off for each machine) 2 pc. and frequency (speed) controller for chicken feet peeling machines. 2 pc.

10. sorting table. from stainless steel 304. usage - for any additional job - packaging, weighting, cleaning etc. 800x1800xh 2 pc. and 900x1900xh 2 pc.         CHICKEN FEET PROCESSING PLANT THIS IS A PROFESSIONAL AND WHOLE CHICKEN FEET PEELING PRODUCTION LINE, EASY TO OPERATE, HIGH OUTPUT. THE LINE WAS USED ONLY 4 MONTHS AND COULD ALSO BE CUSTOMIZED ACCORDING TO THE REQUIREMENTS OF THE BUYER. CHICKEN FEET PEELING PRODUCTION LINE ADVANTAGES: * THE MACHINES ARE ALL MADE OF STAINLESS STEEL, WICH MAKES THE CHICKEN FEET HYGIENE. * EXCELLENT PRODUCTION QUALITY, EASY TO OPERATE * A VARIETY OF PROCESSING CAPACITY, WE CAN CUSTOMIZE IT * STABLE PERFORMANCE, LOW COST AND LABOR SAVING. THE FLOW CHART OF THE CHICKEN FEET PEELING LINE IS AS FOLLOWS 1 CONVEYING 2 CHICKEN FEET 3 CONVEYING 4 BLANCHING 5 PEELING 6 PRE-COOLING 7 SORTING CONVEYOR 8 CUTTING MACHINE 1 PUT THE CHICKEN PAW ON THE CONVEYOR AND TRANSPORT THE CHICKEN FEET TO THE BLANCHING MACHINE. 2 BLANCHING IS A NECESSARY PART IN PROCESSING THE CHICKEN FEET, THROUGH DISINFECT AND COOK CHICKEN FEET, THE CHICKEN FEET IS EASY TO PEELING AND IT ALSO CAN PROTECT ITS NATURAL FLAVOR FROM BEING BROKEN. 3 TRANSPORT THE CHICKEN FEET TO THE CHICKEN FEET PEELING MACHINE FOR PEELING THE SKIN VIA THE CONVEYOR. 4 THE LAST AND ALSO CORE STEP IS PEELING, THE CHICKEN PEELING MACHINE CAN PEELING THE CHICKEN FEET SKIN AND NAIL CLEANLY AND THERE IS NO DAMAGE TO CHICKEN FEET. 5 SPYRAL TYPE AUTO FEET PRE-COOLING MACHINE USED FOR COOLING CHICKENS, IN ORDER TO ACHIEVE THE PURPOSE OF DETOXIFICATION. LOCATION LATVIA VOLTAGE 400 FREQUENCY 50 4 MONTHS OLD MANUFACTURED 2017 FOR SALE THE WHOLE LINE CONSISTING OF 1 PEELING LINE SETUP IN BUYERS PLANT AVAILABLE UPON REQUEST * FOR SALE IS A FULL SET OF MACHINES FOR CHICKEN FEET PROCESSING. * AN EXAMPLE OF AVERAGE FACTORY SCHEME IN PDF FORMAT (DRAWING) TO UNDERSTAND BETTER ALL PROCESS TOGETHER IS AVAILABLE UPON REQUEST. * NOMINAL POWER OF THIS MACHINES ARE 1 TON PER HOUR, IN FACT OPTIMAL POWER IS 6TN READY PRODUCT IN 8 WORKING HR TIME. * ALL MACHINES GOES WITH 3 PHASE, 380-400V ELECTRICITY SUPPLY (CONSUMPTION 21KW/HR) * FOR HEATING PURPOSES STEAM IS NEEDED (500KG/HR, RANGE +130+160C DEGREES) * WATER AND DRAINAGE SUPPLY IS NEEDED (MIN 550 L/ HR) * PEOPLE FOR OPERATION DEPENDS DRAMATICALLY FROM FEET QUALITY.(PERCENTAGE OF BLACK PADS TO REMOVE) HERE ARE DETAILED DESCRIPTION: 1. NET CHAIN LIFTING CONVEYOR. MAIN BODY IS FROM STAINLESS STEEL 304, NET CHAIN TYPE LIFTING MECHANISM. CHAIN WIDTH 600MM. USAGE - AS SUPPLY POINT TO FEED SCALDING MACHINE. 1 PC. 2. NET CHAIN CHICKEN FEET SCALDING MACHINE. MAIN BODY FROM STAINLESS STEEL 304, NET CHAIN TYPE TRANSMISSION MECHANISM. STEAM PIPE CONNECTOR, AUTOMATIC TEMPERATURE CONTROLLER FOR STEAM MACHINE ELECTROMAGNETIC VALVE. WITH AIR SUPPLY HEAT MIXER. OUTLET CHUTE IS DIVIDED INTO TWO PARTS- FOR TWO CHICKEN FEET PEELING MACHINES. MACHINE DIMENSIONS: 5000X1100XH. USAGE - TO BLANCHE RAW CHICKEN FEET AND REPAIR FOR YELLOW SKIN REMOVAL. 1 PC. 3. CHICKEN FEET PEELING MACHINE. MAIN BODY FROM STAINLESS STEEL 304 WITH FOOD GRADE RUBBER PEELING FINGERS INSIDE. EQUIPPED WITH WATER SUPPLY. CLEANING PROGRAMME SPEED CONTROL WITH FREQUENCY CONTROLLER. USAGE - FOR AUTOMATIC CHICKEN FEET YELLOW SKIN PEELING. LENGTH 3200. 2 PC. 4. ELEVATING CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304, BELT FROM 4 MM OIL RESISTANT FOOD GRADE RUBBER. SIZE 2500X550XH. USAGE - TRANSPORTING CHICKEN INTO COOLING TANK. 1 PC. 5. CHUTE. USAGE - BETWEEN ELEVATING CONVEYOR AND COOLING TANK. MAIN BODY FROM STAINLESS STEEL 304. SIZE 2000X800XH. 1 PC. 6. NET CHAIN WASHING COOLING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. BELT- NET CHAIN TYPE TRANSMISSION MECHANISM. WITH AIR SUPPLY WATER MIXER, WITH WATER SUPPLY. USAGE - FOR CHICKEN FEET WASHING AND PRE-COOLING. SIZE: 6000X1100XH. 1 PC. 7. SORTING TABLE - CONVEYOR. MAIN BODY FROM STAINLESS STEEL 304. BELT FROM FOOD GRADE RUBBER. USAGE - FOR SORTING PEELED CHICKEN FEET AND CHECK QUALITY. SIZE 6000X1100XH. 1 PC. 8. FEET CUTTING MACHINE. MAIN BODY FROM STAINLESS STEEL 304. SPECIAL CHICKEN FEET KEEPING CONVEYOR BELT. EQUIPPED WITH 2 CHICKEN FEET CUTTING BLADES. USAGE - TO CUT CHICKEN FEET ANKLE PART TO MAKE PAWS. 2 PC. 9. ELECTRICITY CONTROLLER (ON/OFF FOR EACH MACHINE) 2 PC. AND FREQUENCY (SPEED) CONTROLLER FOR CHICKEN FEET PEELING MACHINES. 2 PC. 10. SORTING TABLE. FROM STAINLESS STEEL 304. USAGE - FOR ANY ADDITIONAL JOB - PACKAGING, WEIGHTING, CLEANING ETC. 800X1800XH 2 PC. AND 900X1900XH 2 PC.
Vendedor: Optimisense LLC
Año de construcción: usado
Ubicación: Land-turning diameter: 200 mm<br/>turning length: 400 mm<br/>control: c 200-4  index<br/>swing diameter: 420 mm<br/>main spindle::  <br/>usable bar diameter: 42 mm<br/>spindle diameter in front bearing: 100 mm<br/>chuck diameter: max. 160 mm<br/>spindle nose: iso 702/1  / 5<br/>turning speed range - spindle: max. 5.000 min/-1<br/>drive capacity - spindle motor: 100% ed= 7,5/13/20 kw<br/>drive capacity - spindle motor: 40% ed= 13,3/22/29 kw<br/>c-axis: 0,001 °<br/>subspindel::  <br/>bar diameter: 36 mm<br/>spindle diameter in front bearing: 100 mm<br/>clamping chuck diameter: max. 160 mm<br/>spindle nose: iso 702/1  / 5<br/>turning speed range - spindle: max. 5.000 min/-1<br/>drive capacity - spindle motor: 100% ed= 7,5/13 kw<br/>drive capacity - spindle motor: 40% ed= 13,3/22 kw<br/>c - axis: 0,001 °<br/>traverses subspindle: 445 mm<br/>turret::  <br/>number of turrets: 2 <br/>turret (x-stations): 2 x 14 pos<br/>tool taper: vdi 25 <br/>turret 1::  <br/>travel -x axis: 155 mm<br/>travel -z axis: 400 mm<br/>spindle speed - driven tool stations: max. 6.000 min -1<br/>power capacity driven tool-stations: 5,5 kw<br/>turret 2::  <br/>travel -x axis: 105 mm<br/>travel -z axis: 400 mm<br/>spindle speed - driven tool stations: max. 6.000 min -1<br/>power capacity driven tool-stations: 5,5 kw<br/>feeds::  <br/>rapid traverse x-axis: 20 m/min<br/>rapid traverse z-axis: 30 m/min<br/>total power requirement: 33 kw<br/>weight of the machine ca.: 5,0 t<br/>dimensions of the machine ca.: 6,5 x 2,1 x 2,1 m<br/>documents:  <br/>chip conveyor:  <br/>turret: 2x <br/>coolantsystem:  <br/>tool drive mechanisum:  <br/>c-axis:  <br/>hydraulic system:  <br/>cnc - turning- and millingcenter<br/>index g 200<br/><br/>- 2 turrets<br/>- tool-drive<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: 200 MM
TURNING LENGTH: 400 MM
CONTROL: C 200-4 INDEX
SWING DIAMETER: 420 MM
MAIN SPINDLE::
USABLE BAR DIAMETER: 42 MM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
CHUCK DIAMETER: MAX. 160 MM
SPINDLE NOSE: ISO 702/1 / 5
TURNING SPEED RANGE - SPINDLE: MAX. 5.000 MIN/-1
DRIVE CAPACITY - SPINDLE MOTOR: 100% ED= 7,5/13/20 KW
DRIVE CAPACITY - SPINDLE MOTOR: 40% ED= 13,3/22/29 KW
C-AXIS: 0,001 °
SUBSPINDEL::
BAR DIAMETER: 36 MM
SPINDLE DIAMETER IN FRONT BEARING: 100 MM
CLAMPING CHUCK DIAMETER: MAX. 160 MM
SPINDLE NOSE: ISO 702/1 / 5
TURNING SPEED RANGE - SPINDLE: MAX. 5.000 MIN/-1
DRIVE CAPACITY - SPINDLE MOTOR: 100% ED= 7,5/13 KW
DRIVE CAPACITY - SPINDLE MOTOR: 40% ED= 13,3/22 KW
C - AXIS: 0,001 °
TRAVERSES SUBSPINDLE: 445 MM
TURRET::
NUMBER OF TURRETS: 2
TURRET (X-STATIONS): 2 X 14 POS
TOOL TAPER: VDI 25
TURRET 1::
TRAVEL -X AXIS: 155 MM
TRAVEL -Z AXIS: 400 MM
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 6.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 5,5 KW
TURRET 2::
TRAVEL -X AXIS: 105 MM
TRAVEL -Z AXIS: 400 MM
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 6.000 MIN -1
POWER CAPACITY DRIVEN TOOL-STATIONS: 5,5 KW
FEEDS::
RAPID TRAVERSE X-AXIS: 20 M/MIN
RAPID TRAVERSE Z-AXIS: 30 M/MIN
TOTAL POWER REQUIREMENT: 33 KW
WEIGHT OF THE MACHINE CA.: 5,0 T
DIMENSIONS OF THE MACHINE CA.: 6,5 X 2,1 X 2,1 M
DOCUMENTS:
CHIP CONVEYOR:
TURRET: 2X
COOLANTSYSTEM:
TOOL DRIVE MECHANISUM:
C-AXIS:
HYDRAULIC SYSTEM:
CNC - TURNING- AND MILLINGCENTER
INDEX G 200

- 2 TURRETS
- TOOL-DRIVE





Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-stock number: u2271-9
second hand stainless steel comminuting hammer mill by fitzmill (usa) model das06. machine has milling chamber with internal dimensions: width 155 mm x length 290 mm. mill has stainless steel rotating shaft with 130 mm width and mounted 16 stainless steel fixed knives/hammers. shaft is belt driven via el motor 5.5 kw/ 7.5 hp, 1455 rpm, 380 v, 50 hz in ex design. mill has stainless steel hopper for feeding material with inlet dimensions: w 145 mm x h 105 mm. bottom discharge. machine is mounted on stainless steel mobile supporting frame and is equipped with ex hermetic design electric box.
 STOCK NUMBER: U2271-9 SECOND HAND STAINLESS STEEL COMMINUTING HAMMER MILL BY FITZMILL (USA) MODEL DAS06. MACHINE HAS MILLING CHAMBER WITH INTERNAL DIMENSIONS: WIDTH 155 MM X LENGTH 290 MM. MILL HAS STAINLESS STEEL ROTATING SHAFT WITH 130 MM WIDTH AND MOUNTED 16 STAINLESS STEEL FIXED KNIVES/HAMMERS. SHAFT IS BELT DRIVEN VIA EL MOTOR 5.5 KW/ 7.5 HP, 1455 RPM, 380 V, 50 HZ IN EX DESIGN. MILL HAS STAINLESS STEEL HOPPER FOR FEEDING MATERIAL WITH INLET DIMENSIONS: W 145 MM X H 105 MM. BOTTOM DISCHARGE. MACHINE IS MOUNTED ON STAINLESS STEEL MOBILE SUPPORTING FRAME AND IS EQUIPPED WITH EX HERMETIC DESIGN ELECTRIC BOX.
Vendedor: Perry Machinery Poland
Año de construcción: usado
Precio: used machinery auction RESALE 1.900 €
Ubicación: Land-weight approx.: 2700 kg<br/>dimensions (l x w x h) approx.: 3000 x 2000 x 2200 mm<br/>description: - serial no.: 3401<br> - control system: sinumerik siemens<br> - centre width between workpiece carriage and tailstock: 520 mm - grinding table: longitudinal travel x-axis: 550 mm<br> - grinding head: cross stroke z-axis: 250 mm<br> - grinding head: height stroke y-axis: 250 mm - usable table surface: 980 x 200 mm<br> <br> grinding spindle:<br> - diameter: 80 mm<br> - speed in 4 steps: 2100 / 3000 /4200 / 6000 rpm<br> - max. grinding disc diameter: 200 mm<br> - tool holder: iso 50 /mk 5<br> - space requirement: 2800 x 2000 mm<br> - control cabinet dimensions: 880 x 880 x 2555 mm<br> - see also pdf<br> WEIGHT APPROX.: 2700 KG
DIMENSIONS (L X W X H) APPROX.: 3000 X 2000 X 2200 MM
DESCRIPTION: - SERIAL NO.: 3401
- CONTROL SYSTEM: SINUMERIK SIEMENS
- CENTRE WIDTH BETWEEN WORKPIECE CARRIAGE AND TAILSTOCK: 520 MM - GRINDING TABLE: LONGITUDINAL TRAVEL X-AXIS: 550 MM
- GRINDING HEAD: CROSS STROKE Z-AXIS: 250 MM
- GRINDING HEAD: HEIGHT STROKE Y-AXIS: 250 MM - USABLE TABLE SURFACE: 980 X 200 MM

GRINDING SPINDLE:
- DIAMETER: 80 MM
- SPEED IN 4 STEPS: 2100 / 3000 /4200 / 6000 RPM
- MAX. GRINDING DISC DIAMETER: 200 MM
- TOOL HOLDER: ISO 50 /MK 5
- SPACE REQUIREMENT: 2800 X 2000 MM
- CONTROL CABINET DIMENSIONS: 880 X 880 X 2555 MM
- SEE ALSO PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-conveyor type rhir 80 length 8.6 m aa
conveyed goods
chips, short (aluminium), aluminium sections
up to approx. 1 kg
conveying capacity
unknown
line management
approx. 3.85 m / 0 â°-4.35 m / 41.5 â° - 0.4 m / 0 â°
frame
sheet metal construction with a height of 400 mm
conveyor belt
rubber belt, oil - and grease-resistant
40 mm high with t studs
at a distance of approx. 600 mm
20 mm high with margin gallery
and through romp 20 mm high
belt width 800 mm
usable width: track left 195 mm, right lane 395 mm
load stations
roll diameter. 89 mm, ball bearing
at a distance of approx. 500 mm
return rollers
roll diameter. 44.5 mm, ball bearing CONVEYOR TYPE RHIR 80 LENGTH 8.6 M AA CONVEYED GOODS CHIPS, SHORT (ALUMINIUM), ALUMINIUM SECTIONS UP TO APPROX. 1 KG CONVEYING CAPACITY UNKNOWN LINE MANAGEMENT APPROX. 3.85 M / 0 &ACIRC;&DEG;-4.35 M / 41.5 &ACIRC;&DEG; - 0.4 M / 0 &ACIRC;&DEG; FRAME SHEET METAL CONSTRUCTION WITH A HEIGHT OF 400 MM CONVEYOR BELT RUBBER BELT, OIL - AND GREASE-RESISTANT 40 MM HIGH WITH T STUDS AT A DISTANCE OF APPROX. 600 MM 20 MM HIGH WITH MARGIN GALLERY AND THROUGH ROMP 20 MM HIGH BELT WIDTH 800 MM USABLE WIDTH: TRACK LEFT 195 MM, RIGHT LANE 395 MM LOAD STATIONS ROLL DIAMETER. 89 MM, BALL BEARING AT A DISTANCE OF APPROX. 500 MM RETURN ROLLERS ROLL DIAMETER. 44.5 MM, BALL BEARING
Vendedor: A-Z Maschinenwelt
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 0 x 0 x 0 mm<br/>description: -serial no.: 20033<br> - control system: sinumerik siemens<br> - centre width between workpiece carriage and tailstock: 500 mm<br> - centre height: 150 mm<br> - usable table surface: 880 x 140 mm<br> <br> grinding spindle:<br> - diameter: 60 mm<br> - speed in 4 steps: 2100 / 3000 /4200 / 6000 rpm<br> - grinding disc diameter: 150 mm (200)<br> - tool holder: iso 50<br> - with extraction unit: sara ultrajet 1<br> - sartorius<br> - with belt filter unit<br> - space requirement: 2600 x 2600 mm<br> - see also pdf WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 0 X 0 X 0 MM
DESCRIPTION: -SERIAL NO.: 20033
- CONTROL SYSTEM: SINUMERIK SIEMENS
- CENTRE WIDTH BETWEEN WORKPIECE CARRIAGE AND TAILSTOCK: 500 MM
- CENTRE HEIGHT: 150 MM
- USABLE TABLE SURFACE: 880 X 140 MM

GRINDING SPINDLE:
- DIAMETER: 60 MM
- SPEED IN 4 STEPS: 2100 / 3000 /4200 / 6000 RPM
- GRINDING DISC DIAMETER: 150 MM (200)
- TOOL HOLDER: ISO 50
- WITH EXTRACTION UNIT: SARA ULTRAJET 1
- SARTORIUS
- WITH BELT FILTER UNIT
- SPACE REQUIREMENT: 2600 X 2600 MM
- SEE ALSO PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 12.500 €
Ubicación: Land-solid steel construction - bearing stage (gallery, stock level), 500 kg / m2, approx. 300 m 2 - used -:
 
price from site: â?¬12.500.-(net), at its own disassembly!
 
manufacturer: lã¤derach storage systems ag (langenthal)
type: storage lift
year of built: unknown
area: approx. 15 m x 20m
lower edge height stage (carrier): approx. 2, 26 m (or 2. 38 m)
lower edge height surface (chip board): approx. 2, 56 m
top surface: according to plan 2, 62 m
load capacity: 500 kg / m â²
grid approx. 4 x 4, 80m
railing on all sides! railing height approx. 1, 10 m
1 staircase
1 large palette transfer station
condition: good
available from: ca middle of november
location: switzerland room lausanne SOLID STEEL CONSTRUCTION - BEARING STAGE (GALLERY, STOCK LEVEL), 500 KG / M2, APPROX. 300 M 2 - USED -: PRICE FROM SITE: &ACIRC;?&NOT;12.500.-(NET), AT ITS OWN DISASSEMBLY! MANUFACTURER: L&ATILDE;&CURREN;DERACH STORAGE SYSTEMS AG (LANGENTHAL) TYPE: STORAGE LIFT YEAR OF BUILT: UNKNOWN AREA: APPROX. 15 M X 20M LOWER EDGE HEIGHT STAGE (CARRIER): APPROX. 2, 26 M (OR 2. 38 M) LOWER EDGE HEIGHT SURFACE (CHIP BOARD): APPROX. 2, 56 M TOP SURFACE: ACCORDING TO PLAN 2, 62 M LOAD CAPACITY: 500 KG / M &ACIRC;&SUP2; GRID APPROX. 4 X 4, 80M RAILING ON ALL SIDES! RAILING HEIGHT APPROX. 1, 10 M 1 STAIRCASE 1 LARGE PALETTE TRANSFER STATION CONDITION: GOOD AVAILABLE FROM: CA MIDDLE OF NOVEMBER LOCATION: SWITZERLAND ROOM LAUSANNE
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: used machinery auction RESALE 1.900 €
Ubicación: Land-weight approx.: 1800 kg<br/>dimensions (l x w x h) approx.: 2300 x 1800 x 2200 mm<br/>description: - serial no.: 20156<br> - control system: sinumerik siemens<br> - centre width between workpiece carriage and tailstock: 500 mm - grinding table:longitudinal travel x-axis: 400 mm<br> - grinding head: cross stroke z-axis: 200 mm<br> - grinding head: height stroke y-axis: 280 mm - usable table surface: 880 x 140 mm<br> <br> grinding spindle:<br> - diameter: 80 mm<br> - speed in 4 steps: 2100 / 3000 /4200 / 6000 rpm<br> - max. grinding disc diameter: 200 mm<br> - tool holder: iso 50<br> - space requirement: 2600 x 2600 mm<br> - control cabinet dimensions: 880 x 880 x 2555 mm<br> - see also pdf<br> WEIGHT APPROX.: 1800 KG
DIMENSIONS (L X W X H) APPROX.: 2300 X 1800 X 2200 MM
DESCRIPTION: - SERIAL NO.: 20156
- CONTROL SYSTEM: SINUMERIK SIEMENS
- CENTRE WIDTH BETWEEN WORKPIECE CARRIAGE AND TAILSTOCK: 500 MM - GRINDING TABLE:LONGITUDINAL TRAVEL X-AXIS: 400 MM
- GRINDING HEAD: CROSS STROKE Z-AXIS: 200 MM
- GRINDING HEAD: HEIGHT STROKE Y-AXIS: 280 MM - USABLE TABLE SURFACE: 880 X 140 MM

GRINDING SPINDLE:
- DIAMETER: 80 MM
- SPEED IN 4 STEPS: 2100 / 3000 /4200 / 6000 RPM
- MAX. GRINDING DISC DIAMETER: 200 MM
- TOOL HOLDER: ISO 50
- SPACE REQUIREMENT: 2600 X 2600 MM
- CONTROL CABINET DIMENSIONS: 880 X 880 X 2555 MM
- SEE ALSO PDF
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land- length x width x height 13500.0 mm ã? 4500.0 mm ã? 3000.0 mm, weight 2000.0 kg

this system was used to thaw frozen shrimp, frozen fish and frozen meat and / or iqf are used as raw material usage.
vsk8ty
it is optimized, carefully to defrost the product in a power-saving mode and to minimize the damage, as well as the weight loss during the process. the income proved to 3-5% better than other systems, which the seller has operated.
it was manufactured by the german high-tech company heinrich gmbh and was installed in 2004.
the system has been well maintained over the years by the manufacturer and maintained. the heinrich gmbh will support the proper removal and, if requested by buyers, rebuild the system at the destination of the buyer and provide the necessary technical support.
with a capacity of 9 by chambers it can a volume of approx. 10 to 12 tons frozen product within 6 to 8 hours.
everything is easy to handle by the workers and has worked perfectly over the years.

description:
-9 defrosting cabins from isolated panels total width of 13.5 metres, depth 450 cm and 300 cm
each of the 9 cabins width: 130cm depth 450cm height.

-1 washing / cleaning cabin for wheelbarrows (product car):
width 170 cm-depth 160 cm height 300 cm plus 1 buffer tank for hot water height of 192 cm and 1 tank for cold water of 270 cm in height

-36 wheel barrows (product wagons) made of galvanized steel for 20 trays
-630 trays of blue color, made of hard plastic food grade of 92 cm x 55 cm dimension

LENGTH X WIDTH X HEIGHT 13500.0 MM &ATILDE;? 4500.0 MM &ATILDE;? 3000.0 MM, WEIGHT 2000.0 KG THIS SYSTEM WAS USED TO THAW FROZEN SHRIMP, FROZEN FISH AND FROZEN MEAT AND / OR IQF ARE USED AS RAW MATERIAL USAGE. VSK8TY IT IS OPTIMIZED, CAREFULLY TO DEFROST THE PRODUCT IN A POWER-SAVING MODE AND TO MINIMIZE THE DAMAGE, AS WELL AS THE WEIGHT LOSS DURING THE PROCESS. THE INCOME PROVED TO 3-5% BETTER THAN OTHER SYSTEMS, WHICH THE SELLER HAS OPERATED. IT WAS MANUFACTURED BY THE GERMAN HIGH-TECH COMPANY HEINRICH GMBH AND WAS INSTALLED IN 2004. THE SYSTEM HAS BEEN WELL MAINTAINED OVER THE YEARS BY THE MANUFACTURER AND MAINTAINED. THE HEINRICH GMBH WILL SUPPORT THE PROPER REMOVAL AND, IF REQUESTED BY BUYERS, REBUILD THE SYSTEM AT THE DESTINATION OF THE BUYER AND PROVIDE THE NECESSARY TECHNICAL SUPPORT. WITH A CAPACITY OF 9 BY CHAMBERS IT CAN A VOLUME OF APPROX. 10 TO 12 TONS FROZEN PRODUCT WITHIN 6 TO 8 HOURS. EVERYTHING IS EASY TO HANDLE BY THE WORKERS AND HAS WORKED PERFECTLY OVER THE YEARS. DESCRIPTION: -9 DEFROSTING CABINS FROM ISOLATED PANELS TOTAL WIDTH OF 13.5 METRES, DEPTH 450 CM AND 300 CM EACH OF THE 9 CABINS WIDTH: 130CM DEPTH 450CM HEIGHT. -1 WASHING / CLEANING CABIN FOR WHEELBARROWS (PRODUCT CAR): WIDTH 170 CM-DEPTH 160 CM HEIGHT 300 CM PLUS 1 BUFFER TANK FOR HOT WATER HEIGHT OF 192 CM AND 1 TANK FOR COLD WATER OF 270 CM IN HEIGHT -36 WHEEL BARROWS (PRODUCT WAGONS) MADE OF GALVANIZED STEEL FOR 20 TRAYS -630 TRAYS OF BLUE COLOR, MADE OF HARD PLASTIC FOOD GRADE OF 92 CM X 55 CM DIMENSION
Vendedor: Prime Catch Seafood GmbH
Año de construcción: usado
Precio: 39.500 €
Ubicación: Land-; power [ps]: 364; front tyre size: 30.5l32; rear tyre size: 540/65-24; accessories: motorhersteller:mercedes benz, breite:3, allrad, kugelkopfkupplung, bordcomputer / monitor, corncracker, heizung, hydrostatische(s) antrieb/getriebe, kabine, klimaanlage - manuell, maisgebiss, zentralschmierung, zusatzgewicht; working width [cm]: 300; top speed [km/h]: 20 ; POWER [PS]: 364; FRONT TYRE SIZE: 30.5L32; REAR TYRE SIZE: 540/65-24; ACCESSORIES: MOTORHERSTELLER:MERCEDES BENZ, BREITE:3, ALLRAD, KUGELKOPFKUPPLUNG, BORDCOMPUTER / MONITOR, CORNCRACKER, HEIZUNG, HYDROSTATISCHE(S) ANTRIEB/GETRIEBE, KABINE, KLIMAANLAGE - MANUELL, MAISGEBISS, ZENTRALSCHMIERUNG, ZUSATZGEWICHT; WORKING WIDTH [CM]: 300; TOP SPEED [KM/H]: 20
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-styroporshredder styro cut 500
is a device for shredding (pelletizing) of styrofoam (eps)
the packing particles are sucked by the device automatically.

the device reduces the storage space by 70-80% and thus also the storage and transport costs.

not contaminated esp granules can be used in the production of new products from esp as a filling material in the
furniture industry or in the field of agriculture to the loosening of the earth.
not contaminated esp granules can be used in the production of new products from esp as a filling material in the furniture industry or in the field of agriculture to the loosening of the earth.

slightly contaminated eps granules are in the construction industry as a repro material to the faã§ade construction or for the production of light
concrete element used.
styro-cut 500 is a professional mill for the grinding of waste styrofoam to the desired size of the granules.

usage possibilities:
company which recycled waste polystyrene.
construction industries that use styrofoam as a heat and sound insulation.
stores that have much styrofoam packaging.
gardeners who use styrofoam as an encore to loosen the soil.
all others, who daily have to deal with much waste styrofoam or polystyrene granules for breakf. purposes need (packaging, etc.)

technical data:
    dimensions: 920 x 1,130 h 1,640 mm
    the turbine electric motor: 11 kw / 2.900 rpm.  -380 v
    approximate weight: 300 kg
    grinding capacity up to approx.: 25 mâ³/h
    granule size with standard filter: 9 mm / granules up to 6 mm
 STYROPORSHREDDER STYRO CUT 500 IS A DEVICE FOR SHREDDING (PELLETIZING) OF STYROFOAM (EPS) THE PACKING PARTICLES ARE SUCKED BY THE DEVICE AUTOMATICALLY. THE DEVICE REDUCES THE STORAGE SPACE BY 70-80% AND THUS ALSO THE STORAGE AND TRANSPORT COSTS. NOT CONTAMINATED ESP GRANULES CAN BE USED IN THE PRODUCTION OF NEW PRODUCTS FROM ESP AS A FILLING MATERIAL IN THE FURNITURE INDUSTRY OR IN THE FIELD OF AGRICULTURE TO THE LOOSENING OF THE EARTH. NOT CONTAMINATED ESP GRANULES CAN BE USED IN THE PRODUCTION OF NEW PRODUCTS FROM ESP AS A FILLING MATERIAL IN THE FURNITURE INDUSTRY OR IN THE FIELD OF AGRICULTURE TO THE LOOSENING OF THE EARTH. SLIGHTLY CONTAMINATED EPS GRANULES ARE IN THE CONSTRUCTION INDUSTRY AS A REPRO MATERIAL TO THE FA&ATILDE;&SECT;ADE CONSTRUCTION OR FOR THE PRODUCTION OF LIGHT CONCRETE ELEMENT USED. STYRO-CUT 500 IS A PROFESSIONAL MILL FOR THE GRINDING OF WASTE STYROFOAM TO THE DESIRED SIZE OF THE GRANULES. USAGE POSSIBILITIES: COMPANY WHICH RECYCLED WASTE POLYSTYRENE. CONSTRUCTION INDUSTRIES THAT USE STYROFOAM AS A HEAT AND SOUND INSULATION. STORES THAT HAVE MUCH STYROFOAM PACKAGING. GARDENERS WHO USE STYROFOAM AS AN ENCORE TO LOOSEN THE SOIL. ALL OTHERS, WHO DAILY HAVE TO DEAL WITH MUCH WASTE STYROFOAM OR POLYSTYRENE GRANULES FOR BREAKF. PURPOSES NEED (PACKAGING, ETC.) TECHNICAL DATA: DIMENSIONS: 920 X 1,130 H 1,640 MM THE TURBINE ELECTRIC MOTOR: 11 KW / 2.900 RPM. -380 V APPROXIMATE WEIGHT: 300 KG GRINDING CAPACITY UP TO APPROX.: 25 M&ACIRC;&SUP3;/H GRANULE SIZE WITH STANDARD FILTER: 9 MM / GRANULES UP TO 6 MM
Vendedor: Wilhelm Freudlinger Werkzeuge und Maschinen
Año de construcción: usado
Precio: 45.000 €
Ubicación: Land-; power [ps]: 415; front tyre size: 800/65-32; rear tyre size: 540/65-24; accessories: motorhersteller:mercedes benz, breite:3, allrad, kugelkopfkupplung, autopilot, gegenschneide einst. elektr., heizung, hydrostatische(s) antrieb/getriebe, kabine, klimaanlage - manuell, pickup, schleifeinrichtung elektr., zentralschmierung, zusatzgewicht, ; working width [cm]: 300; top speed [km/h]: 20 ; POWER [PS]: 415; FRONT TYRE SIZE: 800/65-32; REAR TYRE SIZE: 540/65-24; ACCESSORIES: MOTORHERSTELLER:MERCEDES BENZ, BREITE:3, ALLRAD, KUGELKOPFKUPPLUNG, AUTOPILOT, GEGENSCHNEIDE EINST. ELEKTR., HEIZUNG, HYDROSTATISCHE(S) ANTRIEB/GETRIEBE, KABINE, KLIMAANLAGE - MANUELL, PICKUP, SCHLEIFEINRICHTUNG ELEKTR., ZENTRALSCHMIERUNG, ZUSATZGEWICHT, ; WORKING WIDTH [CM]: 300; TOP SPEED [KM/H]: 20
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Precio: 4.675 €
Ubicación: Land-%%%%%% attention – special offers now available !!! 
%%%%%% so prices are currently reduced by 15% !!!


horiz. surface grinding machine jung g 60

manufacturer: jung
type: g 60
mach.-nr.: 12972
year of construction: ??? / 09.2018 tüp.
comm.-nr.: 3990400/009
stock-nr.: 1907

+++ special price: old 5.500,- € | now 4.675,- € bn
+++ all prices are shown without taxes (net price)

 
technical data

(according to manufacturer)

table clamping surface: 600 x 200 mm
max. grinding length: 500 mm
max. grinding width: 200 mm
table speed: infinitely adjustable up to 15 m / min.

max. grinding wheel – Ø : 200 mm
max. grinding wheel width: 30 mm

drive power: 1,6 kw
weight: ca. 800 kg
standing area: w 2,00 x d 1,20 x h 2,00 m
color: grey-white/ blue

 
features

* automatic cross feed
* hydr. table adjustment, infinitely adjustable
* fine adjustments by hand = 0,01 / 0,005 mm
* grinding wheel honing device
* flange with grinding wheel
* magnetic clamp plate 500 x 200 mm
* wet grinding installation
* 4 machine feet, adjustable
* betriebsanleitung jung g60

	
* hat das baujahr zusaetzlich den hinweis „tuep.“, heisst das, die maschine ist elektrisch und technisch bei uns ueberprueft worden.
* hat ein jahr zusaetzlich den hinweis „tueb.“, dann ist die maschine in dem jahr teilueberholt worden. laut angabe des vorherigen besitzers.
* ist das baujahr mit einem * versehen, entspricht das der kundenangabe oder ist geschaetzt.  %%%%%% ATTENTION – SPECIAL OFFERS NOW AVAILABLE !!! %%%%%% SO PRICES ARE CURRENTLY REDUCED BY 15% !!! HORIZ. SURFACE GRINDING MACHINE JUNG G 60 MANUFACTURER: JUNG TYPE: G 60 MACH.-NR.: 12972 YEAR OF CONSTRUCTION: ??? / 09.2018 TüP. COMM.-NR.: 3990400/009 STOCK-NR.: 1907 +++ SPECIAL PRICE: OLD 5.500,- € | NOW 4.675,- € BN +++ ALL PRICES ARE SHOWN WITHOUT TAXES (NET PRICE) TECHNICAL DATA (ACCORDING TO MANUFACTURER) TABLE CLAMPING SURFACE: 600 X 200 MM MAX. GRINDING LENGTH: 500 MM MAX. GRINDING WIDTH: 200 MM TABLE SPEED: INFINITELY ADJUSTABLE UP TO 15 M / MIN. MAX. GRINDING WHEEL – Ø : 200 MM MAX. GRINDING WHEEL WIDTH: 30 MM DRIVE POWER: 1,6 KW WEIGHT: CA. 800 KG STANDING AREA: W 2,00 X D 1,20 X H 2,00 M COLOR: GREY-WHITE/ BLUE FEATURES * AUTOMATIC CROSS FEED * HYDR. TABLE ADJUSTMENT, INFINITELY ADJUSTABLE * FINE ADJUSTMENTS BY HAND = 0,01 / 0,005 MM * GRINDING WHEEL HONING DEVICE * FLANGE WITH GRINDING WHEEL * MAGNETIC CLAMP PLATE 500 X 200 MM * WET GRINDING INSTALLATION * 4 MACHINE FEET, ADJUSTABLE * BETRIEBSANLEITUNG JUNG G60 * HAT DAS BAUJAHR ZUSAETZLICH DEN HINWEIS „TUEP.“, HEISST DAS, DIE MASCHINE IST ELEKTRISCH UND TECHNISCH BEI UNS UEBERPRUEFT WORDEN. * HAT EIN JAHR ZUSAETZLICH DEN HINWEIS „TUEB.“, DANN IST DIE MASCHINE IN DEM JAHR TEILUEBERHOLT WORDEN. LAUT ANGABE DES VORHERIGEN BESITZERS. * IST DAS BAUJAHR MIT EINEM * VERSEHEN, ENTSPRICHT DAS DER KUNDENANGABE ODER IST GESCHAETZT.
Vendedor: ProHa Maschinen
Año de construcción: usado
Ubicación: Land-turning diameter: max. 500 mm<br/>turning length: 1.250 mm<br/>control: 840d sl shopturn  siemens<br/>swing diameter: 500 mm<br/>distance between spindles: 1.450 mm<br/>standard turning dia.: 390 mm<br/>main spindle::  <br/>turning speed range - main spindle: max. 5.000 min/-1<br/>power capacity - main spindel: 25 / 34 kw<br/>max. torque: 380 / 280 nm<br/>spindle head: 170h5 <br/>spindle bearing diameter: 130 mm<br/>spindle bore: 87 mm<br/>bar material dia.: 67 mm<br/>usable bar diameter: 66 mm<br/>c-axis: 360 °<br/>chucking diameter: 250 mm<br/>tool magazin::  <br/>number of toolpositions: 48 pos.<br/>max. tool diameter: 80 mm<br/>max. tool-dia with free toolbox: 120 mm<br/>max. tool weight: 8,0 kg<br/>max. tool length: 300 mm<br/>milling spindle::  <br/>speed milling spindle: max. 12.000 min/-1<br/>power capacity - milling spindle: 22 kw<br/>max. torque: 100 nm<br/>tool taper: capto c6 <br/>b-axis: +/- 110 °<br/>axis stroke::  <br/>x-axis: 450 (-10) mm<br/>z-axis: 1.300 mm<br/>y-axis: +/- 100 mm<br/>subspindel::  <br/>spindle speed range subspindle: max. 5.000 min/-1<br/>power capacity - sub spindle: 25 / 32 kw<br/>max. torque: 170 nm<br/>chucking diameter: 250 mm<br/>max. bar capacity: 67 mm<br/>usable bar diameter: 66 mm<br/>c-axis: 360 °<br/>total power requirement: 70 kva<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.: 4,0 x 2,5 x 2,5 m<br/>documents:  <br/>chip conveyor:  <br/>milling spindle:  <br/>coolantsystem:  <br/>hydraulic system:  <br/>automatic tool changer: 48 pos. <br/>work light:  <br/>c-axis:  <br/>b-axis:  <br/>y-axis:  <br/>tailstock function counter spindle:  <br/>direct probing: x / y / z <br/>subspindle:  <br/>signal lamp - 4 colour:  <br/>three jaw chuck: smw bhd 250/66 <br/>hollow chuck unit:  <br/>partical hollow chuck unit:  <br/>internal coolant:  <br/>cnc - turning- and millingcenter<br/>gildemeister - ctx beta 1250 tc<br/><br/>- 5-axis-simultaneous-machining<br/>- main- and subspindle ism 76<br/>- milling-spindle<br/><br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 500 MM
TURNING LENGTH: 1.250 MM
CONTROL: 840D SL SHOPTURN SIEMENS
SWING DIAMETER: 500 MM
DISTANCE BETWEEN SPINDLES: 1.450 MM
STANDARD TURNING DIA.: 390 MM
MAIN SPINDLE::
TURNING SPEED RANGE - MAIN SPINDLE: MAX. 5.000 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 25 / 34 KW
MAX. TORQUE: 380 / 280 NM
SPINDLE HEAD: 170H5
SPINDLE BEARING DIAMETER: 130 MM
SPINDLE BORE: 87 MM
BAR MATERIAL DIA.: 67 MM
USABLE BAR DIAMETER: 66 MM
C-AXIS: 360 °
CHUCKING DIAMETER: 250 MM
TOOL MAGAZIN::
NUMBER OF TOOLPOSITIONS: 48 POS.
MAX. TOOL DIAMETER: 80 MM
MAX. TOOL-DIA WITH FREE TOOLBOX: 120 MM
MAX. TOOL WEIGHT: 8,0 KG
MAX. TOOL LENGTH: 300 MM
MILLING SPINDLE::
SPEED MILLING SPINDLE: MAX. 12.000 MIN/-1
POWER CAPACITY - MILLING SPINDLE: 22 KW
MAX. TORQUE: 100 NM
TOOL TAPER: CAPTO C6
B-AXIS: +/- 110 °
AXIS STROKE::
X-AXIS: 450 (-10) MM
Z-AXIS: 1.300 MM
Y-AXIS: +/- 100 MM
SUBSPINDEL::
SPINDLE SPEED RANGE SUBSPINDLE: MAX. 5.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 25 / 32 KW
MAX. TORQUE: 170 NM
CHUCKING DIAMETER: 250 MM
MAX. BAR CAPACITY: 67 MM
USABLE BAR DIAMETER: 66 MM
C-AXIS: 360 °
TOTAL POWER REQUIREMENT: 70 KVA
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: 4,0 X 2,5 X 2,5 M
DOCUMENTS:
CHIP CONVEYOR:
MILLING SPINDLE:
COOLANTSYSTEM:
HYDRAULIC SYSTEM:
AUTOMATIC TOOL CHANGER: 48 POS.
WORK LIGHT:
C-AXIS:
B-AXIS:
Y-AXIS:
TAILSTOCK FUNCTION COUNTER SPINDLE:
DIRECT PROBING: X / Y / Z
SUBSPINDLE:
SIGNAL LAMP - 4 COLOUR:
THREE JAW CHUCK: SMW BHD 250/66
HOLLOW CHUCK UNIT:
PARTICAL HOLLOW CHUCK UNIT:
INTERNAL COOLANT:
CNC - TURNING- AND MILLINGCENTER
GILDEMEISTER - CTX BETA 1250 TC

- 5-AXIS-SIMULTANEOUS-MACHINING
- MAIN- AND SUBSPINDLE ISM 76
- MILLING-SPINDLE





Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Precio: 17.500 €
Ubicación: Land-edgebander brandt optimat kdf 210 with add and two scraping.

edge thickness role approx. 0,4-3 mm
workpiece height approx. 8-50 mm
feed about 10m / min
noise guard
pull-out workpiece support
suction connection 1 x 125 mm, 1 x 100 mm, 3 x 60 mm
easycontrol control ec10 + simple intuitive operation of the machine
four control programs can be stored

aggregates:
top pressure manual adjustment

infeed fence (manual adjustment with siku counter)

fuegefraesen with slide cutters

kontaktheizschuh to heat the plate

change pool colour change (currently exists for a pool)

gluing unit with automatic edge feeder roll material up to 3 mm

pressure zone with 3 rolls

caps with two motors, bevel caps manual

combined milling unit (easy with hand), adjustable for flush milling, thin or thick edge there are really only two handles

radius scraper r2, manually einrueckbar

glue joint scraper with a large roller, pneumatically controlled to usage

hood latch
ce mark
manual folder

a video of the current machine can be sent on request.

all indexable of milling units and the scraping were renewed, sharpened saws, machine is directly accessible. only the diafuegefraeser were not renewed, but still can be used.

machine dimensions approx. 3700 (with plate) x 1250 x 1550mm (lxwxh)
weight approx. 1200kg.

please the pdf file with our terms and conditions and order form.
the machine can be demonstrated like by appointment with us on-site. we offer only machines that demonstration ready are available in our warehouse, see "more offers of this provider". EDGEBANDER BRANDT OPTIMAT KDF 210 WITH ADD AND TWO SCRAPING. EDGE THICKNESS ROLE APPROX. 0,4-3 MM WORKPIECE HEIGHT APPROX. 8-50 MM FEED ABOUT 10M / MIN NOISE GUARD PULL-OUT WORKPIECE SUPPORT SUCTION CONNECTION 1 X 125 MM, 1 X 100 MM, 3 X 60 MM EASYCONTROL CONTROL EC10 + SIMPLE INTUITIVE OPERATION OF THE MACHINE FOUR CONTROL PROGRAMS CAN BE STORED AGGREGATES: TOP PRESSURE MANUAL ADJUSTMENT INFEED FENCE (MANUAL ADJUSTMENT WITH SIKU COUNTER) FUEGEFRAESEN WITH SLIDE CUTTERS KONTAKTHEIZSCHUH TO HEAT THE PLATE CHANGE POOL COLOUR CHANGE (CURRENTLY EXISTS FOR A POOL) GLUING UNIT WITH AUTOMATIC EDGE FEEDER ROLL MATERIAL UP TO 3 MM PRESSURE ZONE WITH 3 ROLLS CAPS WITH TWO MOTORS, BEVEL CAPS MANUAL COMBINED MILLING UNIT (EASY WITH HAND), ADJUSTABLE FOR FLUSH MILLING, THIN OR THICK EDGE THERE ARE REALLY ONLY TWO HANDLES RADIUS SCRAPER R2, MANUALLY EINRUECKBAR GLUE JOINT SCRAPER WITH A LARGE ROLLER, PNEUMATICALLY CONTROLLED TO USAGE HOOD LATCH CE MARK MANUAL FOLDER A VIDEO OF THE CURRENT MACHINE CAN BE SENT ON REQUEST. ALL INDEXABLE OF MILLING UNITS AND THE SCRAPING WERE RENEWED, SHARPENED SAWS, MACHINE IS DIRECTLY ACCESSIBLE. ONLY THE DIAFUEGEFRAESER WERE NOT RENEWED, BUT STILL CAN BE USED. MACHINE DIMENSIONS APPROX. 3700 (WITH PLATE) X 1250 X 1550MM (LXWXH) WEIGHT APPROX. 1200KG. PLEASE THE PDF FILE WITH OUR TERMS AND CONDITIONS AND ORDER FORM. THE MACHINE CAN BE DEMONSTRATED LIKE BY APPOINTMENT WITH US ON-SITE. WE OFFER ONLY MACHINES THAT DEMONSTRATION READY ARE AVAILABLE IN OUR WAREHOUSE, SEE "MORE OFFERS OF THIS PROVIDER".
Vendedor: Tischlerei Bracht GbR
Año de construcción: usado
Ubicación: Land-turning diameter: max. 190 mm<br/>turning length: max. 620 mm<br/>control: fanuc 18 itb <br/>greates pass round over bed: 190 mm<br/>swing dia. over traverse guideway: 190 mm<br/>standard turning dia.: 170 mm<br/>distance between spindles: max. 970 mm<br/>:  <br/>main spindle::  <br/>max. spindle speed: 4.500 min/-1<br/>power capacity - main spindel: 18,5 / 15 kw<br/>spindle bearing diameter: 110 mm<br/>spindle bore: 80 mm<br/>max. bar capacity: 65 mm<br/>usable bar diameter: 52 mm<br/>spindle nose: a2-6 <br/>max. chucking diameter: 165 mm<br/>c-axis: 0,001 °<br/>spindle center height - floor: 1.150 mm<br/>:  <br/>subspindle::  <br/>max. spindle speed: 5.000 min/-1<br/>power capacity - sub spindle: 11 / 7,5 kw<br/>spindle bearing diameter: 90 mm<br/>spindle bore: 63 mm<br/>max. bar capacity: 51 mm<br/>usable bar diameter: - mm<br/>spindle nose: a2-5 <br/>max. chucking diameter: 165 mm<br/>c-axis: 0,001 °<br/>spindle center height - floor: 1.150 mm<br/>traverses subspindle: 760 mm<br/>:  <br/>upper turret 1::  <br/>number of toolpositions: (2x 12) 24 pos.<br/>number of driven toolspositions: 12 pos.<br/>shank diameter: 25 mm<br/>drill shank diameter: 32 mm<br/>switching time: 0,2 - 0,7 sec<br/>change-time chip to chip: 3,0 sec<br/>max. tool diameter: 80 mm<br/>b - axis: (+91°/-91°) 182 °<br/>indexing: 1 °<br/>y-axis: (+45/-45) 90 mm<br/>:  <br/>lower turret 2::  <br/>number of toolpositions: (2x 12) 24 pos.<br/>number of driven toolspositions: 12 pos.<br/>shank diameter: 25 mm<br/>drill shank diameter: 32 mm<br/>switching time: 0,2 - 0,7 sec<br/>change-time chip to chip: 3,0 sec<br/>max. tool diameter: 80 mm<br/>:  <br/>tool actuation turret::  <br/>spindle speed - driven tool stations: max. 6.000 min -1<br/>power capacity - driven tool-stations: 5,5 / 3,7 kw<br/>number of driven toolspositions: 2x 12 pos.<br/>shaft diameter - max. of the bolts: 25mm / 32 mm<br/>:  <br/>axis stroke::  <br/>x-axis: 1: 345 mm<br/>x-axis: 2: 167,5 mm<br/>y-axis: +/- 45 mm<br/>z-axis: 1: 1.240 mm<br/>z-axis: 2: 685 mm<br/>b-axis: +/- 91 °<br/>c-axis: 1+2: 360 °<br/>:  <br/>feeds::  <br/>rapid traverse ( x / y / z ): 16 / 6 / 40 m/min<br/>rapid b-axis: 180° /sec<br/>rapid traverse c-axis: 600 min/-1<br/>feed speeds: x: max. 16.000 mm/min<br/>feed speeds: y: max. 6.000 mm/min<br/>feed speeds: z: max. 40.000 mm/min<br/>tipp feed: 0 - 1.260 mm/min<br/>feed speeds: c: 1 - 4.800 °/min<br/>:  <br/>total power requirement: 77 kva<br/>weight of the machine ca.: 12,5 t<br/>dimensions of the machine ca.: (11,0) 6,0 x 3,7 x 2,5 m<br/>:  <br/>accessories::  <br/>documents:  <br/>coolantsystem:  <br/>chip conveyor:  <br/>subspindle:  <br/>tool drive mechanisum:  <br/>y-axis:  <br/>c-axis:  <br/>work light:  <br/>bar feeder interface:  <br/>div. tool holder:  <br/>driven tools: 16 (13x z / 3x x) <br/>collet chuck: 2x <br/>bar feeder irco simag: option (+ ?13.000,00) <br/>cnc - high-performance- turning- and millingcenter<br/>nakamura - super ntj<br/><br/>- main- and subspindle<br/>- upper swivel-turret incl. y-axis<br/>- lower turret<br/>- 2 c-axis<br/>- starting-up in 2004<br/>- option: barloader breuning irco - simag 70.1r ´1998 (surcharge ?13.000,00)<br/><br/><br/><br/><br/> TURNING DIAMETER: MAX. 190 MM
TURNING LENGTH: MAX. 620 MM
CONTROL: FANUC 18 ITB
GREATES PASS ROUND OVER BED: 190 MM
SWING DIA. OVER TRAVERSE GUIDEWAY: 190 MM
STANDARD TURNING DIA.: 170 MM
DISTANCE BETWEEN SPINDLES: MAX. 970 MM
:
MAIN SPINDLE::
MAX. SPINDLE SPEED: 4.500 MIN/-1
POWER CAPACITY - MAIN SPINDEL: 18,5 / 15 KW
SPINDLE BEARING DIAMETER: 110 MM
SPINDLE BORE: 80 MM
MAX. BAR CAPACITY: 65 MM
USABLE BAR DIAMETER: 52 MM
SPINDLE NOSE: A2-6
MAX. CHUCKING DIAMETER: 165 MM
C-AXIS: 0,001 °
SPINDLE CENTER HEIGHT - FLOOR: 1.150 MM
:
SUBSPINDLE::
MAX. SPINDLE SPEED: 5.000 MIN/-1
POWER CAPACITY - SUB SPINDLE: 11 / 7,5 KW
SPINDLE BEARING DIAMETER: 90 MM
SPINDLE BORE: 63 MM
MAX. BAR CAPACITY: 51 MM
USABLE BAR DIAMETER: - MM
SPINDLE NOSE: A2-5
MAX. CHUCKING DIAMETER: 165 MM
C-AXIS: 0,001 °
SPINDLE CENTER HEIGHT - FLOOR: 1.150 MM
TRAVERSES SUBSPINDLE: 760 MM
:
UPPER TURRET 1::
NUMBER OF TOOLPOSITIONS: (2X 12) 24 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
SHANK DIAMETER: 25 MM
DRILL SHANK DIAMETER: 32 MM
SWITCHING TIME: 0,2 - 0,7 SEC
CHANGE-TIME CHIP TO CHIP: 3,0 SEC
MAX. TOOL DIAMETER: 80 MM
B - AXIS: (+91°/-91°) 182 °
INDEXING: 1 °
Y-AXIS: (+45/-45) 90 MM
:
LOWER TURRET 2::
NUMBER OF TOOLPOSITIONS: (2X 12) 24 POS.
NUMBER OF DRIVEN TOOLSPOSITIONS: 12 POS.
SHANK DIAMETER: 25 MM
DRILL SHANK DIAMETER: 32 MM
SWITCHING TIME: 0,2 - 0,7 SEC
CHANGE-TIME CHIP TO CHIP: 3,0 SEC
MAX. TOOL DIAMETER: 80 MM
:
TOOL ACTUATION TURRET::
SPINDLE SPEED - DRIVEN TOOL STATIONS: MAX. 6.000 MIN -1
POWER CAPACITY - DRIVEN TOOL-STATIONS: 5,5 / 3,7 KW
NUMBER OF DRIVEN TOOLSPOSITIONS: 2X 12 POS.
SHAFT DIAMETER - MAX. OF THE BOLTS: 25MM / 32 MM
:
AXIS STROKE::
X-AXIS: 1: 345 MM
X-AXIS: 2: 167,5 MM
Y-AXIS: +/- 45 MM
Z-AXIS: 1: 1.240 MM
Z-AXIS: 2: 685 MM
B-AXIS: +/- 91 °
C-AXIS: 1+2: 360 °
:
FEEDS::
RAPID TRAVERSE ( X / Y / Z ): 16 / 6 / 40 M/MIN
RAPID B-AXIS: 180° /SEC
RAPID TRAVERSE C-AXIS: 600 MIN/-1
FEED SPEEDS: X: MAX. 16.000 MM/MIN
FEED SPEEDS: Y: MAX. 6.000 MM/MIN
FEED SPEEDS: Z: MAX. 40.000 MM/MIN
TIPP FEED: 0 - 1.260 MM/MIN
FEED SPEEDS: C: 1 - 4.800 °/MIN
:
TOTAL POWER REQUIREMENT: 77 KVA
WEIGHT OF THE MACHINE CA.: 12,5 T
DIMENSIONS OF THE MACHINE CA.: (11,0) 6,0 X 3,7 X 2,5 M
:
ACCESSORIES::
DOCUMENTS:
COOLANTSYSTEM:
CHIP CONVEYOR:
SUBSPINDLE:
TOOL DRIVE MECHANISUM:
Y-AXIS:
C-AXIS:
WORK LIGHT:
BAR FEEDER INTERFACE:
DIV. TOOL HOLDER:
DRIVEN TOOLS: 16 (13X Z / 3X X)
COLLET CHUCK: 2X
BAR FEEDER IRCO SIMAG: OPTION (+ ?13.000,00)
CNC - HIGH-PERFORMANCE- TURNING- AND MILLINGCENTER
NAKAMURA - SUPER NTJ

- MAIN- AND SUBSPINDLE
- UPPER SWIVEL-TURRET INCL. Y-AXIS
- LOWER TURRET
- 2 C-AXIS
- STARTING-UP IN 2004
- OPTION: BARLOADER BREUNING IRCO - SIMAG 70.1R ´1998 (SURCHARGE ?13.000,00)




Vendedor: Stiens Werkzeugmaschinenhandelsgesellschaft mbH
Año de construcción: usado
Ubicación: Land-1xofen dosing furnace manufacturer strikowestofen model w 1200 year of production: 2005

1xniederdrucktiegelã¶fen electrically heated hindenlang type: nm 2700 year: 2013

use/process: melting / holding / metering, application process,

materials/metals: aluminium

heating type: electrically heated,.

electrical resistance heated crucible furnace for melting, holding and casting of aluminium.
the furnace cover ends with the upper lid, so that customer the corresponding plate of low pressure casting device can be used on the riser pipe is included in the even.
furnace for casting of light metals in the low-pressure processes up to approx. 0.9 bar (higher pressure on request).
the oven is electrically heated and equipped with high-quality insulation.
advantages of low-pressure heater

low heat loss through high-quality insulation
precise temperature control
fast production readiness
uniform heating
low emission

capacity

2700 kg aluminium

usage area

for aluminium 1XOFEN DOSING FURNACE MANUFACTURER STRIKOWESTOFEN MODEL W 1200 YEAR OF PRODUCTION: 2005 1XNIEDERDRUCKTIEGEL&ATILDE;&PARA;FEN ELECTRICALLY HEATED HINDENLANG TYPE: NM 2700 YEAR: 2013 USE/PROCESS: MELTING / HOLDING / METERING, APPLICATION PROCESS, MATERIALS/METALS: ALUMINIUM HEATING TYPE: ELECTRICALLY HEATED,. ELECTRICAL RESISTANCE HEATED CRUCIBLE FURNACE FOR MELTING, HOLDING AND CASTING OF ALUMINIUM. THE FURNACE COVER ENDS WITH THE UPPER LID, SO THAT CUSTOMER THE CORRESPONDING PLATE OF LOW PRESSURE CASTING DEVICE CAN BE USED ON THE RISER PIPE IS INCLUDED IN THE EVEN. FURNACE FOR CASTING OF LIGHT METALS IN THE LOW-PRESSURE PROCESSES UP TO APPROX. 0.9 BAR (HIGHER PRESSURE ON REQUEST). THE OVEN IS ELECTRICALLY HEATED AND EQUIPPED WITH HIGH-QUALITY INSULATION. ADVANTAGES OF LOW-PRESSURE HEATER LOW HEAT LOSS THROUGH HIGH-QUALITY INSULATION PRECISE TEMPERATURE CONTROL FAST PRODUCTION READINESS UNIFORM HEATING LOW EMISSION CAPACITY 2700 KG ALUMINIUM USAGE AREA FOR ALUMINIUM
Vendedor: Metalmak GmbH
Año de construcción: usado
Precio: 1.550 €
Ubicación: Land-furnierzusammensetzmaschine\r\nfabrikat: kuper\r\ntyp: fwj 920\r\n\r\nauslegerarm (max. größe der durchzuführenden teile) 920mm\r\nfurnierverleimung mittels leimfaden von oben \r\nbetätigung mit fußpedal \r\nmaschine auf rollen verfahrbar \r\n380v \r\nwerkstückspannung und vorschub pneumatisch \r\n\r\nhinweis: \r\ndie technischen daten und beschreibungen sind abschrift der damaligen auftragsbestätigung. daten dienen zur information und sind nicht verbindlich. FURNIERZUSAMMENSETZMASCHINE\R\NFABRIKAT: KUPER\R\NTYP: FWJ 920\R\N\R\NAUSLEGERARM (MAX. GRößE DER DURCHZUFüHRENDEN TEILE) 920MM\R\NFURNIERVERLEIMUNG MITTELS LEIMFADEN VON OBEN \R\NBETäTIGUNG MIT FUßPEDAL \R\NMASCHINE AUF ROLLEN VERFAHRBAR \R\N380V \R\NWERKSTüCKSPANNUNG UND VORSCHUB PNEUMATISCH \R\N\R\NHINWEIS: \R\NDIE TECHNISCHEN DATEN UND BESCHREIBUNGEN SIND ABSCHRIFT DER DAMALIGEN AUFTRAGSBESTäTIGUNG. DATEN DIENEN ZUR INFORMATION UND SIND NICHT VERBINDLICH.
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more GE types: