1000 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-mobile slow-speed shredder.
diesel engine: 490 hp

more capacity and torque than the standard version of dw 3060 buffalo.

rear discharge conveyor with overband magnetic separator
comb lengthening
hydr. self-propelled drive (crawler gear)
radio remote control MOBILE SLOW-SPEED SHREDDER. DIESEL ENGINE: 490 HP MORE CAPACITY AND TORQUE THAN THE STANDARD VERSION OF DW 3060 BUFFALO. REAR DISCHARGE CONVEYOR WITH OVERBAND MAGNETIC SEPARATOR COMB LENGTHENING HYDR. SELF-PROPELLED DRIVE (CRAWLER GEAR) RADIO REMOTE CONTROL
Vendedor: Hawamex Recycling und Umwelttechnik GmbH & Co. KG
Año de construcción: usado
Precio: 1.750 €
Ubicación: Land-drilling machine, drilling machine, pillar drilling machine, column drilling machine, multi-spindle head, multi-spindle drilling head, drilling gear<br /><br />-table size 280 mm<br />-spindle mount mk3<br />-unloading 225 mm<br />-speeds 100-2900 rpm<br />-columns Ø 100 mm<br />-spindle stroke 120 mm<br />-transmission<br />-dimensions 400/600 / h1650 mm<br />-weight 142 kg DRILLING MACHINE, DRILLING MACHINE, PILLAR DRILLING MACHINE, COLUMN DRILLING MACHINE, MULTI-SPINDLE HEAD, MULTI-SPINDLE DRILLING HEAD, DRILLING GEAR

-TABLE SIZE 280 MM
-SPINDLE MOUNT MK3
-UNLOADING 225 MM
-SPEEDS 100-2900 RPM
-COLUMNS Ø 100 MM
-SPINDLE STROKE 120 MM
-TRANSMISSION
-DIMENSIONS 400/600 / H1650 MM
-WEIGHT 142 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-lightweight steel framed warehouse from 1998 with a covered floor surface area of approximately 864 square meters [36m * 24m * 5.7 / 7.8 m] which is due to be dismantled mid april 2019.

future uses:
as a factory building, craftsmen workshop, warehouse, machine shop and much more.

approximate dimensions:
covered area: 864 square meters; usable area: approx. 843 sq m;
hall length: 36.07 meters outside wall cladding;
longitudinal grid: 6,00 m bay width.
hall width: approx. 24.07 m outside of wall cladding;
endwall grid: 6.00 m distance between end wall posts.
clear hight: 5,00 m to the frame tie/ strap;
eave height: 5.74 m top steel;
apex hight: 7,86 meters top of steel work;
roof pitch: 10 degree symmetrical saddle roof;
snow load: so = 0,75 kn/sqm / 75 kg/m²;
wind load: alex = 0,50 kn/m² pressure;

structural steel work:
bolted frame structure from hot-rolled, hot-dip galvanized euro-profiles of steel grade s 235 jr g2 according to din en 10 027-1 (st 37). it's 5 main frames with uprights ipe 300 and trusses ipe 360 with frame-ties fl 8 x 100 s 355; two end wall frames with corner posts and intermediary posts he-a 140 spaced 6.00 c2c. 

roof covering:
sandwich iso roof panels - ral 9002 - mounted on galvanized cold formed z profile purlins.

wall covering:
horizontal fixed corrugated steel sheets ral 9006 - white aluminium and steel trapezoidal profiles (primed and coated). the wall panel is dented and incomplete because of the adjacent connecting building. 

facilities:
1x sectional door (4000 x 4000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the side wall.
1x steel doors (1000 x 2000 mm) in the end wall.
4x smoke and heat vent flaps (1800 x 1200 mm);
various lights with switch gear and fuse box;

documentation: drawings from 1997/ 1998.
hall location: bavaria. availability and viewing by appointment.
availability: to be removed by the end of april.

net price:
upon written request with full company / contact information.    LIGHTWEIGHT STEEL FRAMED WAREHOUSE FROM 1998 WITH A COVERED FLOOR SURFACE AREA OF APPROXIMATELY 864 SQUARE METERS [36M * 24M * 5.7 / 7.8 M] WHICH IS DUE TO BE DISMANTLED MID APRIL 2019. FUTURE USES: AS A FACTORY BUILDING, CRAFTSMEN WORKSHOP, WAREHOUSE, MACHINE SHOP AND MUCH MORE. APPROXIMATE DIMENSIONS: COVERED AREA: 864 SQUARE METERS; USABLE AREA: APPROX. 843 SQ M; HALL LENGTH: 36.07 METERS OUTSIDE WALL CLADDING; LONGITUDINAL GRID: 6,00 M BAY WIDTH. HALL WIDTH: APPROX. 24.07 M OUTSIDE OF WALL CLADDING; ENDWALL GRID: 6.00 M DISTANCE BETWEEN END WALL POSTS. CLEAR HIGHT: 5,00 M TO THE FRAME TIE/ STRAP; EAVE HEIGHT: 5.74 M TOP STEEL; APEX HIGHT: 7,86 METERS TOP OF STEEL WORK; ROOF PITCH: 10 DEGREE SYMMETRICAL SADDLE ROOF; SNOW LOAD: SO = 0,75 KN/SQM / 75 KG/M²; WIND LOAD: ALEX = 0,50 KN/M² PRESSURE; STRUCTURAL STEEL WORK: BOLTED FRAME STRUCTURE FROM HOT-ROLLED, HOT-DIP GALVANIZED EURO-PROFILES OF STEEL GRADE S 235 JR G2 ACCORDING TO DIN EN 10 027-1 (ST 37). IT'S 5 MAIN FRAMES WITH UPRIGHTS IPE 300 AND TRUSSES IPE 360 WITH FRAME-TIES FL 8 X 100 S 355; TWO END WALL FRAMES WITH CORNER POSTS AND INTERMEDIARY POSTS HE-A 140 SPACED 6.00 C2C. ROOF COVERING: SANDWICH ISO ROOF PANELS - RAL 9002 - MOUNTED ON GALVANIZED COLD FORMED Z PROFILE PURLINS. WALL COVERING: HORIZONTAL FIXED CORRUGATED STEEL SHEETS RAL 9006 - WHITE ALUMINIUM AND STEEL TRAPEZOIDAL PROFILES (PRIMED AND COATED). THE WALL PANEL IS DENTED AND INCOMPLETE BECAUSE OF THE ADJACENT CONNECTING BUILDING. FACILITIES: 1X SECTIONAL DOOR (4000 X 4000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE SIDE WALL. 1X STEEL DOORS (1000 X 2000 MM) IN THE END WALL. 4X SMOKE AND HEAT VENT FLAPS (1800 X 1200 MM); VARIOUS LIGHTS WITH SWITCH GEAR AND FUSE BOX; DOCUMENTATION: DRAWINGS FROM 1997/ 1998. HALL LOCATION: BAVARIA. AVAILABILITY AND VIEWING BY APPOINTMENT. AVAILABILITY: TO BE REMOVED BY THE END OF APRIL. NET PRICE: UPON WRITTEN REQUEST WITH FULL COMPANY / CONTACT INFORMATION.
Vendedor: THAL BAUSATZHALLEN
Año de construcción: usado
Precio: 2.650 €
Ubicación: Land-drilling machine, drilling machine, pillar drilling machine, pillar drilling machine<br /><br />-with clamping table and fixed machine vice<br />-table size 275 x 325 mm<br />-spindle mount mk3<br />-unloading 300 mm<br />-speeds 90-1450 rpm<br />-columns Ø 120 mm<br />-spindle stroke 125 mm<br />-translation via gears<br />-1x drills available<br />-prize piece<br />-dimensions 770/660 / h2060 mm<br />-weight 284 kg DRILLING MACHINE, DRILLING MACHINE, PILLAR DRILLING MACHINE, PILLAR DRILLING MACHINE

-WITH CLAMPING TABLE AND FIXED MACHINE VICE
-TABLE SIZE 275 X 325 MM
-SPINDLE MOUNT MK3
-UNLOADING 300 MM
-SPEEDS 90-1450 RPM
-COLUMNS Ø 120 MM
-SPINDLE STROKE 125 MM
-TRANSLATION VIA GEARS
-1X DRILLS AVAILABLE
-PRIZE PIECE
-DIMENSIONS 770/660 / H2060 MM
-WEIGHT 284 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-machine type lathe - cycle controlled make gildemeister nef type plus 500 year 1998
control type cnc forkhart 315 mm three-back chuck
storage location eersel
country of origin germany delivery immediately cargo basis exw technical details
control heidenhain manual plus rotary diameter 500 mm turning diameter over slide 290 mm turning length 1000 mm plan route 250 mm chuck diameter of 260 mm spindle speeds gear-unit stage 1 80-250 1 rpm 
spindle speeds gear-unit stage 2 20-710 1/min. 
spindle speed gear level 3 80-2800 1/min. 
spindle drive 11 kw torque spindle 100% ed 1050 nm max spindle nose according to din 55027 - size 8 spindle bore 70 mm hollow cone of spindle nose metric 80 spindle diameter in the vord. camp 100 mm feed force longitudinal / plan 10 / 5 kn feed 5 m / min rapid traverse - longitudinal/plan 8 / 6 m / min tool holder multifix c tailstock quill diameter 80 mm tailstock hub 180 mm tailstock spindle mount mt 5 weight - machine 3.20 x 1.75 x 1.85 m additional information
grundig heidenhain manual plus control
 MACHINE TYPE LATHE - CYCLE CONTROLLED MAKE GILDEMEISTER NEF TYPE PLUS 500 YEAR 1998 CONTROL TYPE CNC FORKHART 315 MM THREE-BACK CHUCK STORAGE LOCATION EERSEL COUNTRY OF ORIGIN GERMANY DELIVERY IMMEDIATELY CARGO BASIS EXW TECHNICAL DETAILS CONTROL HEIDENHAIN MANUAL PLUS ROTARY DIAMETER 500 MM TURNING DIAMETER OVER SLIDE 290 MM TURNING LENGTH 1000 MM PLAN ROUTE 250 MM CHUCK DIAMETER OF 260 MM SPINDLE SPEEDS GEAR-UNIT STAGE 1 80-250 1 RPM SPINDLE SPEEDS GEAR-UNIT STAGE 2 20-710 1/MIN. SPINDLE SPEED GEAR LEVEL 3 80-2800 1/MIN. SPINDLE DRIVE 11 KW TORQUE SPINDLE 100% ED 1050 NM MAX SPINDLE NOSE ACCORDING TO DIN 55027 - SIZE 8 SPINDLE BORE 70 MM HOLLOW CONE OF SPINDLE NOSE METRIC 80 SPINDLE DIAMETER IN THE VORD. CAMP 100 MM FEED FORCE LONGITUDINAL / PLAN 10 / 5 KN FEED 5 M / MIN RAPID TRAVERSE - LONGITUDINAL/PLAN 8 / 6 M / MIN TOOL HOLDER MULTIFIX C TAILSTOCK QUILL DIAMETER 80 MM TAILSTOCK HUB 180 MM TAILSTOCK SPINDLE MOUNT MT 5 WEIGHT - MACHINE 3.20 X 1.75 X 1.85 M ADDITIONAL INFORMATION GRUNDIG HEIDENHAIN MANUAL PLUS CONTROL
Vendedor: Maschinenhandel Eersel
Año de construcción: usado
Ubicación: Land-2 cylinders, cap. variable speed 4 - 26 rpm\r\ncylinder diameter 2 pcs. 95 mm, grooved\r\n                            length 300 mm\r\ntemplate with 3 holes d 25 mm, distance 110 mm\r\ntemplate changeable\r\n\r\ncategory: bakery machine\r\nsales of bakery machines used machines bakery resolution food machine reconditioned condition as it is new\r\n 2 CYLINDERS, CAP. VARIABLE SPEED 4 - 26 RPM\R\NCYLINDER DIAMETER 2 PCS. 95 MM, GROOVED\R\N LENGTH 300 MM\R\NTEMPLATE WITH 3 HOLES D 25 MM, DISTANCE 110 MM\R\NTEMPLATE CHANGEABLE\R\N\R\NCATEGORY: BAKERY MACHINE\R\NSALES OF BAKERY MACHINES USED MACHINES BAKERY RESOLUTION FOOD MACHINE RECONDITIONED CONDITION AS IT IS NEW\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-man 9l 48/60 crankshafts std size.

together with counter weights and gears.

     MAN 9L 48/60 CRANKSHAFTS STD SIZE. TOGETHER WITH COUNTER WEIGHTS AND GEARS.
Vendedor: DEPA MARINE
Año de construcción: usado
Ubicación: Land-volume scaling, cap. max. 50 cycl/min.,(estimation)\r\nvolume scaling between 450 - 1350 ccm, (depends on the product)\r\ndepositing nozzles changeable,\r\ndiameter of the nozzle approx. 24 mm, hopper approx. 60 l\r\nmade from stainless steel, machine moveable\r\n VOLUME SCALING, CAP. MAX. 50 CYCL/MIN.,(ESTIMATION)\R\NVOLUME SCALING BETWEEN 450 - 1350 CCM, (DEPENDS ON THE PRODUCT)\R\NDEPOSITING NOZZLES CHANGEABLE,\R\NDIAMETER OF THE NOZZLE APPROX. 24 MM, HOPPER APPROX. 60 L\R\NMADE FROM STAINLESS STEEL, MACHINE MOVEABLE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 mm
	-space requirement approx.	         b t 810 x 570 x h 1260 mm
-weight approx.					  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-variable speed\r\ncylinder diameter 2 pcs. 95 mm, grooved, length 620 mm\r\ntemplate with 2 holes d 25 mm, template changeable VARIABLE SPEED\R\NCYLINDER DIAMETER 2 PCS. 95 MM, GROOVED, LENGTH 620 MM\R\NTEMPLATE WITH 2 HOLES D 25 MM, TEMPLATE CHANGEABLE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	 
	-ease of use
-grinding process by means of geared motor
-drills dimensions 3-50 mm
-angle of the spitz 90-140 â°
-adjustable angle
	-grinding motor 400 v / 0.25 kw
	-geared motor for swinging 400 v / 0.12 kw
-grinding wheel dimensions 175 x 22 x 20/90 x 20 mm
	-space requirement approx.	 		 b t 810 x 570 x h 1260 mm
-weight approx.					  	  120 kg
-with - clamping device
		 -before setting device
 TECHNICAL DATA: -EASE OF USE -GRINDING PROCESS BY MEANS OF GEARED MOTOR -DRILLS DIMENSIONS 3-50 MM -ANGLE OF THE SPITZ 90-140 &ACIRC;&DEG; -ADJUSTABLE ANGLE -GRINDING MOTOR 400 V / 0.25 KW -GEARED MOTOR FOR SWINGING 400 V / 0.12 KW -GRINDING WHEEL DIMENSIONS 175 X 22 X 20/90 X 20 MM -SPACE REQUIREMENT APPROX. B T 810 X 570 X H 1260 MM -WEIGHT APPROX. 120 KG -WITH - CLAMPING DEVICE -BEFORE SETTING DEVICE
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-qty. 1 second-hand extrusion press line
mfc.:	clecim, rexroth, oilgear, eri, omav, auburtin	
type:	horizontal front loading press
built:	1986		continuously modernised!	stopped production in 2009
force:	3000 mt		pressure:	300 bar
billet dia.:	9.5” can be modified to 9”	billet length:	540 – 1080 mm
automation	plc siemens s7-400 cpu to control press and furnace
plc siemens s5-135 cpu to control profile exit table and traction bench plc pb400 merlin to control roller table, cold saw, stacker, spacer feeder.
scope of supply:	feeding system	billet furnace		hot shear
	extrusion press	run-out table		double puller		hot saw
	stretcher 	finishing saw           stacker
  QTY. 1 SECOND-HAND EXTRUSION PRESS LINE MFC.: CLECIM, REXROTH, OILGEAR, ERI, OMAV, AUBURTIN TYPE: HORIZONTAL FRONT LOADING PRESS BUILT: 1986 CONTINUOUSLY MODERNISED! STOPPED PRODUCTION IN 2009 FORCE: 3000 MT PRESSURE: 300 BAR BILLET DIA.: 9.5” CAN BE MODIFIED TO 9” BILLET LENGTH: 540 – 1080 MM AUTOMATION PLC SIEMENS S7-400 CPU TO CONTROL PRESS AND FURNACE PLC SIEMENS S5-135 CPU TO CONTROL PROFILE EXIT TABLE AND TRACTION BENCH PLC PB400 MERLIN TO CONTROL ROLLER TABLE, COLD SAW, STACKER, SPACER FEEDER. SCOPE OF SUPPLY: FEEDING SYSTEM BILLET FURNACE HOT SHEAR EXTRUSION PRESS RUN-OUT TABLE DOUBLE PULLER HOT SAW STRETCHER FINISHING SAW STACKER
Vendedor: MET-TECH GMBH
Año de construcción: usado
Ubicación: Land-technical data conveyor belt<br/>manufacturer not known<br/>typ  kgf 800-1200<br/>year of construction 2018<br/>driving motor 5,5 kw, 400 v, 10,5 a, yoc 2017<br/>length feeding conveyor 4,970 mm<br/>length elevating conveyor 13,400 mm<br/>length goose neck 2,530 mm<br/>grade 30°<br/>height of drive axle above ground approx. 6,400 mm<br/>effecting width 1,170 mm<br/>height of side wall feeding conv. 530 mm<br/>height of side wall elevating conv. 800 mm<br/>transport dimensions feeding conveyor 7,000 x 1,700 x 1,800 mm (l x w x h)<br/>transport dimensions elevating conveyor 13,400 x 2,300 x 2,400 mm (l x w x h)<br/>weight approx. 9 tons<br/><br/>condition of the conveyor belt:<br/>the chain belt conveyor was completely overhauled in 2018 and rebuilt with new components. the frame and all attachments are sandblasted, primed and painted. the following components were renewed:<br/>the frame parts with the running surfaces for the chains, the chains, the sprockets, the traverses and the belt. the sew eurodrive engine with gearbox was built in 2017.<br/><br/>comments:<br/>inspections are possible after agreement.  we will not assume liability for the given technical data and possible errors. TECHNICAL DATA CONVEYOR BELT
MANUFACTURER NOT KNOWN
TYP KGF 800-1200
YEAR OF CONSTRUCTION 2018
DRIVING MOTOR 5,5 KW, 400 V, 10,5 A, YOC 2017
LENGTH FEEDING CONVEYOR 4,970 MM
LENGTH ELEVATING CONVEYOR 13,400 MM
LENGTH GOOSE NECK 2,530 MM
GRADE 30°
HEIGHT OF DRIVE AXLE ABOVE GROUND APPROX. 6,400 MM
EFFECTING WIDTH 1,170 MM
HEIGHT OF SIDE WALL FEEDING CONV. 530 MM
HEIGHT OF SIDE WALL ELEVATING CONV. 800 MM
TRANSPORT DIMENSIONS FEEDING CONVEYOR 7,000 X 1,700 X 1,800 MM (L X W X H)
TRANSPORT DIMENSIONS ELEVATING CONVEYOR 13,400 X 2,300 X 2,400 MM (L X W X H)
WEIGHT APPROX. 9 TONS

CONDITION OF THE CONVEYOR BELT:
THE CHAIN BELT CONVEYOR WAS COMPLETELY OVERHAULED IN 2018 AND REBUILT WITH NEW COMPONENTS. THE FRAME AND ALL ATTACHMENTS ARE SANDBLASTED, PRIMED AND PAINTED. THE FOLLOWING COMPONENTS WERE RENEWED:
THE FRAME PARTS WITH THE RUNNING SURFACES FOR THE CHAINS, THE CHAINS, THE SPROCKETS, THE TRAVERSES AND THE BELT. THE SEW EURODRIVE ENGINE WITH GEARBOX WAS BUILT IN 2017.

COMMENTS:
INSPECTIONS ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-maximum turning diameter 560 mm
maximum turning length 978 mm
step 116.5 mm bar
x-axis 357 mm
z axis 1105 mm
tours 2000
spindle line asa 11
c axis
turret 12 driven tools
2001
cnc fanuc 18i-t
mechanical gearbox range
presetting
evacuator chips MAXIMUM TURNING DIAMETER 560 MM MAXIMUM TURNING LENGTH 978 MM STEP 116.5 MM BAR X-AXIS 357 MM Z AXIS 1105 MM TOURS 2000 SPINDLE LINE ASA 11 C AXIS TURRET 12 DRIVEN TOOLS 2001 CNC FANUC 18I-T MECHANICAL GEARBOX RANGE PRESETTING EVACUATOR CHIPS
Vendedor: Industrialbay
Año de construcción: usado
Ubicación: Land-manufacturer bollegraaf<br/>type hbc 100<br/>year of construction 1991, 2017 overhauled<br/>hours of operation 40,586 hours<br/>press power main press 100 tons<br/>press power of pre-press 50 tons<br/>feed channel 1,600 x 1,100 mm (l x w)<br/>capacity per cycle time 3,15 m³<br/>theoretic cycle time 22 sec.<br/>bale size 750 x 1,100 mm, length variable<br/>driving motor 2 x 30 kw<br/>tying system 5 fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm up to 12 tons/h<br/>bulk weight of 50 kg/cbm up to 25 tons/h<br/>bulk weight of 100 kg/cbm up to 47 tons/h<br/>bale weight 550 up to 850 kg, depends on material<br/>volume hydraulic oil tank 1,200 l<br/>sps controller (manuf., type)  telemecanique tsx micro<br/>operating panel (manuf., type)  schneider magelis touch panel<br/>transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h)<br/>machine weight baler approx. 30 tons<br/><br/>comments:<br/>the machine has been overhauled. the following work was carried out or parts were replaced.<br/>this press has been overhauled. following steps of repair and overhauling have been taken:<br/><br/>elder sps controls including enter and exit component assemblies were replaced by new controls of telemécanique tsx micro and the input commands in    the touch panel translated into russian.<br/>manual service push buttons were replaced by schneider tft touch panel 7,5? of type magelis.<br/>upper and lower light barriers including repeater (telco) have been renewed.<br/>the electric connection at hydraulic manifold is new, with partially renewed machine control cables and removal of needless connection.<br/>hydraulic oil tank has been emptied, cleaned and all filters were renewed.<br/>rubber gear for diminishing pressure between pumps and electric motors were renewed.<br/>pipes between high pressure part of the pump and hydraulic manifold have been renewed.<br/>cartridge cap on manifold has been sealed up newly.<br/>rubber buffers of pre-press flap are new.<br/>filling level indicator at tank has been renewed.<br/>measurement connections at hydraulic tank were altered.<br/>all flanges of hydraulic pipes have been sealed up newly.<br/>main cylinder, clam shell cylinder, needle cylinder and cylinder for wire core have all been sealed up newly.<br/>plunger of main cylinder, of clam shell cylinder and of needle cylinder have been ground and chrome-plated newly.<br/>all rollers and guide pulleys of press ram have been cleaned and loosened, the front rollers were renewed.<br/>wire guidance was cleaned and loosened, the back wire guidance rollers and wire core with pinhead rollers have been renewed.<br/>pinheads including blades have been reworked.<br/>hinges at press channel, on lateral parts and cap have been renewed.<br/>all hydraulic hoses of clam shell cylinders have been renewed.<br/><br/>inspections in russia, near moscow are possible after agreement.  we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYPE HBC 100
YEAR OF CONSTRUCTION 1991, 2017 OVERHAULED
HOURS OF OPERATION 40,586 HOURS
PRESS POWER MAIN PRESS 100 TONS
PRESS POWER OF PRE-PRESS 50 TONS
FEED CHANNEL 1,600 X 1,100 MM (L X W)
CAPACITY PER CYCLE TIME 3,15 M³
THEORETIC CYCLE TIME 22 SEC.
BALE SIZE 750 X 1,100 MM, LENGTH VARIABLE
DRIVING MOTOR 2 X 30 KW
TYING SYSTEM 5 FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM UP TO 12 TONS/H
BULK WEIGHT OF 50 KG/CBM UP TO 25 TONS/H
BULK WEIGHT OF 100 KG/CBM UP TO 47 TONS/H
BALE WEIGHT 550 UP TO 850 KG, DEPENDS ON MATERIAL
VOLUME HYDRAULIC OIL TANK 1,200 L
SPS CONTROLLER (MANUF., TYPE) TELEMECANIQUE TSX MICRO
OPERATING PANEL (MANUF., TYPE) SCHNEIDER MAGELIS TOUCH PANEL
TRANSPORT DIMENSIONS ONLY BALER 11,750 X 2,250 X 3,150 MM (L X W X H)
MACHINE WEIGHT BALER APPROX. 30 TONS

COMMENTS:
THE MACHINE HAS BEEN OVERHAULED. THE FOLLOWING WORK WAS CARRIED OUT OR PARTS WERE REPLACED.
THIS PRESS HAS BEEN OVERHAULED. FOLLOWING STEPS OF REPAIR AND OVERHAULING HAVE BEEN TAKEN:

ELDER SPS CONTROLS INCLUDING ENTER AND EXIT COMPONENT ASSEMBLIES WERE REPLACED BY NEW CONTROLS OF TELEMéCANIQUE TSX MICRO AND THE INPUT COMMANDS IN THE TOUCH PANEL TRANSLATED INTO RUSSIAN.
MANUAL SERVICE PUSH BUTTONS WERE REPLACED BY SCHNEIDER TFT TOUCH PANEL 7,5? OF TYPE MAGELIS.
UPPER AND LOWER LIGHT BARRIERS INCLUDING REPEATER (TELCO) HAVE BEEN RENEWED.
THE ELECTRIC CONNECTION AT HYDRAULIC MANIFOLD IS NEW, WITH PARTIALLY RENEWED MACHINE CONTROL CABLES AND REMOVAL OF NEEDLESS CONNECTION.
HYDRAULIC OIL TANK HAS BEEN EMPTIED, CLEANED AND ALL FILTERS WERE RENEWED.
RUBBER GEAR FOR DIMINISHING PRESSURE BETWEEN PUMPS AND ELECTRIC MOTORS WERE RENEWED.
PIPES BETWEEN HIGH PRESSURE PART OF THE PUMP AND HYDRAULIC MANIFOLD HAVE BEEN RENEWED.
CARTRIDGE CAP ON MANIFOLD HAS BEEN SEALED UP NEWLY.
RUBBER BUFFERS OF PRE-PRESS FLAP ARE NEW.
FILLING LEVEL INDICATOR AT TANK HAS BEEN RENEWED.
MEASUREMENT CONNECTIONS AT HYDRAULIC TANK WERE ALTERED.
ALL FLANGES OF HYDRAULIC PIPES HAVE BEEN SEALED UP NEWLY.
MAIN CYLINDER, CLAM SHELL CYLINDER, NEEDLE CYLINDER AND CYLINDER FOR WIRE CORE HAVE ALL BEEN SEALED UP NEWLY.
PLUNGER OF MAIN CYLINDER, OF CLAM SHELL CYLINDER AND OF NEEDLE CYLINDER HAVE BEEN GROUND AND CHROME-PLATED NEWLY.
ALL ROLLERS AND GUIDE PULLEYS OF PRESS RAM HAVE BEEN CLEANED AND LOOSENED, THE FRONT ROLLERS WERE RENEWED.
WIRE GUIDANCE WAS CLEANED AND LOOSENED, THE BACK WIRE GUIDANCE ROLLERS AND WIRE CORE WITH PINHEAD ROLLERS HAVE BEEN RENEWED.
PINHEADS INCLUDING BLADES HAVE BEEN REWORKED.
HINGES AT PRESS CHANNEL, ON LATERAL PARTS AND CAP HAVE BEEN RENEWED.
ALL HYDRAULIC HOSES OF CLAM SHELL CYLINDERS HAVE BEEN RENEWED.

INSPECTIONS IN RUSSIA, NEAR MOSCOW ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Precio: 2.400 
Ubicación: Land-bt rrb2

technical data

type: rr b2
brand: bt
condition: used
drive: electric
3ecslldf
gearbox: automatic
weight capacity: 1600 kg
year: 2008
lifting height: 5700 mm
mast type: triplex
 BT RRB2 TECHNICAL DATA TYPE: RR B2 BRAND: BT CONDITION: USED DRIVE: ELECTRIC 3ECSLLDF GEARBOX: AUTOMATIC WEIGHT CAPACITY: 1600 KG YEAR: 2008 LIFTING HEIGHT: 5700 MM MAST TYPE: TRIPLEX
Vendedor: Machine-For-Sale.com
Año de construcción: usado
Ubicación: Land-manufacturer anis trend d.o.o.<br/>type ats110-75d 60 tons <br/>year of construction 2019<br/>hours of operation 52 hours<br/>press power main press 59 tons<br/>specific press capacity 71 n/cm²<br/>bale density with material cardboard approx.450 kg/m³<br/>bale density with material pet- and hdpe bottles approx. 280 up to 320 kg/m³<br/>feed hopper 1,600 x 1,040 mm<br/>capacity per cycle 2,13 m³<br/>theoretic cycle time 10,7 sec.<br/>cycle time under operating conditions approx. 20 sec.<br/>theoretic throughput rate 441 m³/hour<br/>throughput rate under operating conditions approx. 235 m³/hour  <br/>bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l)<br/>driving motor 45 kw<br/>oil cooler 1,5 kw<br/>oil heater 2,0 kw<br/>main electric power 400 v / 50 hz<br/>connected load 49 kw (without conveyor)<br/>total input current 96 a<br/>power supply fuses 3 x 125 a<br/>power supply wire size 4 x 50 mm²<br/>isolations class ip 55<br/>tying system 4- fold vertical, fully automatic<br/>throughput rate at a<br/>bulk weight of 30 kg/cbm approx. 7 up to 8 tons/hour<br/>bulk weight of 50 kg/cbm approx. 10 up to 12 tons/hour<br/>bulk weight of 80 kg/cbm approx. 14 up to 16 tons/hour<br/>throughput rate with ruffler approx. 15 tons/hour<br/>bale weight 450 up to 750 kg, depends on material and bale length<br/>bale weight mixed cardboard approx. 580 kg<br/>bale weight mixed paper approx.  650<br/>bale weight pet- and hdpe bottles approx. 300 kg<br/>volume hydraulic oil tank 1,000 l<br/>hydraulic system working pressure 290 bar<br/>sps controller (manuf., type) siemens et 200 s<br/>operating panel (manuf., type) siemens ktp 700<br/>baler dimensions built up without hopper 9,755 x 2,227 x 3,229 mm (l x w x h)<br/>transport dimensions only baler 9,600 x 2,200 x 2,750 mm<br/>machine weight baler approx. 20 tons<br/><br/>special features of the machine:<br/>german plc, siemens, type et 200 s with touch panel, siemens, type kpt 700, internet modem for online service and system diagnosis can be retrofitted.<br/>german hydraulic pump from bucher hydraulics, internal gear qx, 5th generation, extremely robust and durable for over 30 years.<br/>german hydraulic valves from parker, available at short notice throughout europe. <br/>wear-resistant hardox 450 plates in the pressing chamber (base and side walls), as well as the press stemp is equipped with hardox 450 plates all around. <br/>service-friendly motor/pump unit, over 500 x 500 mm flange plate can be dismantled in one unit without disconnecting the motor from the pump. <br/>all knives, on the press stemp as well as the counter knives in the frame are segmented, can be interchanged and can be rotated by 180°, so they can be used twice.<br/><br/>service of the manufacturer and its partners in europe:<br/>all wearing parts and spare parts, also hydraulic pumps and cylinders are available in 12 up to max. 24 hours by courier service.<br/>service technicians are on site within 24 up to max. 48 hours within europe. MANUFACTURER ANIS TREND D.O.O.
TYPE ATS110-75D 60 TONS
YEAR OF CONSTRUCTION 2019
HOURS OF OPERATION 52 HOURS
PRESS POWER MAIN PRESS 59 TONS
SPECIFIC PRESS CAPACITY 71 N/CM²
BALE DENSITY WITH MATERIAL CARDBOARD APPROX.450 KG/M³
BALE DENSITY WITH MATERIAL PET- AND HDPE BOTTLES APPROX. 280 UP TO 320 KG/M³
FEED HOPPER 1,600 X 1,040 MM
CAPACITY PER CYCLE 2,13 M³
THEORETIC CYCLE TIME 10,7 SEC.
CYCLE TIME UNDER OPERATING CONDITIONS APPROX. 20 SEC.
THEORETIC THROUGHPUT RATE 441 M³/HOUR
THROUGHPUT RATE UNDER OPERATING CONDITIONS APPROX. 235 M³/HOUR
BALE SIZE 1,100 X 770 X 1,200 UP TO 2,200 MM (W X H X L)
DRIVING MOTOR 45 KW
OIL COOLER 1,5 KW
OIL HEATER 2,0 KW
MAIN ELECTRIC POWER 400 V / 50 HZ
CONNECTED LOAD 49 KW (WITHOUT CONVEYOR)
TOTAL INPUT CURRENT 96 A
POWER SUPPLY FUSES 3 X 125 A
POWER SUPPLY WIRE SIZE 4 X 50 MM²
ISOLATIONS CLASS IP 55
TYING SYSTEM 4- FOLD VERTICAL, FULLY AUTOMATIC
THROUGHPUT RATE AT A
BULK WEIGHT OF 30 KG/CBM APPROX. 7 UP TO 8 TONS/HOUR
BULK WEIGHT OF 50 KG/CBM APPROX. 10 UP TO 12 TONS/HOUR
BULK WEIGHT OF 80 KG/CBM APPROX. 14 UP TO 16 TONS/HOUR
THROUGHPUT RATE WITH RUFFLER APPROX. 15 TONS/HOUR
BALE WEIGHT 450 UP TO 750 KG, DEPENDS ON MATERIAL AND BALE LENGTH
BALE WEIGHT MIXED CARDBOARD APPROX. 580 KG
BALE WEIGHT MIXED PAPER APPROX. 650
BALE WEIGHT PET- AND HDPE BOTTLES APPROX. 300 KG
VOLUME HYDRAULIC OIL TANK 1,000 L
HYDRAULIC SYSTEM WORKING PRESSURE 290 BAR
SPS CONTROLLER (MANUF., TYPE) SIEMENS ET 200 S
OPERATING PANEL (MANUF., TYPE) SIEMENS KTP 700
BALER DIMENSIONS BUILT UP WITHOUT HOPPER 9,755 X 2,227 X 3,229 MM (L X W X H)
TRANSPORT DIMENSIONS ONLY BALER 9,600 X 2,200 X 2,750 MM
MACHINE WEIGHT BALER APPROX. 20 TONS

SPECIAL FEATURES OF THE MACHINE:
GERMAN PLC, SIEMENS, TYPE ET 200 S WITH TOUCH PANEL, SIEMENS, TYPE KPT 700, INTERNET MODEM FOR ONLINE SERVICE AND SYSTEM DIAGNOSIS CAN BE RETROFITTED.
GERMAN HYDRAULIC PUMP FROM BUCHER HYDRAULICS, INTERNAL GEAR QX, 5TH GENERATION, EXTREMELY ROBUST AND DURABLE FOR OVER 30 YEARS.
GERMAN HYDRAULIC VALVES FROM PARKER, AVAILABLE AT SHORT NOTICE THROUGHOUT EUROPE.
WEAR-RESISTANT HARDOX 450 PLATES IN THE PRESSING CHAMBER (BASE AND SIDE WALLS), AS WELL AS THE PRESS STEMP IS EQUIPPED WITH HARDOX 450 PLATES ALL AROUND.
SERVICE-FRIENDLY MOTOR/PUMP UNIT, OVER 500 X 500 MM FLANGE PLATE CAN BE DISMANTLED IN ONE UNIT WITHOUT DISCONNECTING THE MOTOR FROM THE PUMP.
ALL KNIVES, ON THE PRESS STEMP AS WELL AS THE COUNTER KNIVES IN THE FRAME ARE SEGMENTED, CAN BE INTERCHANGED AND CAN BE ROTATED BY 180°, SO THEY CAN BE USED TWICE.

SERVICE OF THE MANUFACTURER AND ITS PARTNERS IN EUROPE:
ALL WEARING PARTS AND SPARE PARTS, ALSO HYDRAULIC PUMPS AND CYLINDERS ARE AVAILABLE IN 12 UP TO MAX. 24 HOURS BY COURIER SERVICE.
SERVICE TECHNICIANS ARE ON SITE WITHIN 24 UP TO MAX. 48 HOURS WITHIN EUROPE.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-3d pipe laser mazak fabri gear 400 ii

the used 3d pipe laser mazak fabri gear 400 ii is in a technically and optically flawless condition and can still be seen under power. 15 m long pipes and profiles can be edited to a shell diameter of 400 mm.

the pipe laser 3d fabri gear 400 mkii is 4kw as new and in top condition with low hours.

facilities:

15m loading and unloading for processing of up to 15 m long profiles/tubes
    tapping unit with 6 thread stops up to m10
    4kw resonator to wall thickness 20 mm fe at 90 â°
    3d cutting head for the processing of tubes / profiles / free form part
    tactile sensor for material scanning
    clamping of the material on both sides of the cutting head for unbeatable precision
    automatic pipe measurement
    automatic profile centering
    non-contact height scanning
    work piece clamping jaws
    documentation
    7.5 'cutting head (non-contact height scanning)
    super high pressure gas pipeline

cutting performance 90â°:

fe up to 20mm
    va up to 10mm
    aluminium up to 8mm

the machine comes with warranty, commissioning + training, software + training offered.
 3D PIPE LASER MAZAK FABRI GEAR 400 II THE USED 3D PIPE LASER MAZAK FABRI GEAR 400 II IS IN A TECHNICALLY AND OPTICALLY FLAWLESS CONDITION AND CAN STILL BE SEEN UNDER POWER. 15 M LONG PIPES AND PROFILES CAN BE EDITED TO A SHELL DIAMETER OF 400 MM. THE PIPE LASER 3D FABRI GEAR 400 MKII IS 4KW AS NEW AND IN TOP CONDITION WITH LOW HOURS. FACILITIES: 15M LOADING AND UNLOADING FOR PROCESSING OF UP TO 15 M LONG PROFILES/TUBES TAPPING UNIT WITH 6 THREAD STOPS UP TO M10 4KW RESONATOR TO WALL THICKNESS 20 MM FE AT 90 &ACIRC;&DEG; 3D CUTTING HEAD FOR THE PROCESSING OF TUBES / PROFILES / FREE FORM PART TACTILE SENSOR FOR MATERIAL SCANNING CLAMPING OF THE MATERIAL ON BOTH SIDES OF THE CUTTING HEAD FOR UNBEATABLE PRECISION AUTOMATIC PIPE MEASUREMENT AUTOMATIC PROFILE CENTERING NON-CONTACT HEIGHT SCANNING WORK PIECE CLAMPING JAWS DOCUMENTATION 7.5 'CUTTING HEAD (NON-CONTACT HEIGHT SCANNING) SUPER HIGH PRESSURE GAS PIPELINE CUTTING PERFORMANCE 90&ACIRC;&DEG;: FE UP TO 20MM VA UP TO 10MM ALUMINIUM UP TO 8MM THE MACHINE COMES WITH WARRANTY, COMMISSIONING + TRAINING, SOFTWARE + TRAINING OFFERED.
Vendedor: H+S Maschinentechnik GmbH
Año de construcción: usado
Precio: 46.900 €
Ubicación: Land-manufacturer bollegraaf<br/>typ hbt 600/2000 x 21,986<br/>year of contruction 2000 (overhauled 2017)<br/>drive power 7,5 kw<br/>length infeed conveyor over all 6,723 mm<br/>length module infeed conveyor 5,500 mm<br/>height infeed conveyor over all 1,300 mm<br/>height side wall infeed conveyor 500 mm<br/>length elevating conveyor over all 13,923 mm<br/>lenght module elevating conveyor 13,300 mm<br/>height side wall elevating conveyor 800 mm<br/>gradient of elevating conveyor 30°<br/>length gooseneck 1,340 mm<br/>lenght module gooseneck 1,000<br/>slope of gooseneck 15°<br/>height drive shaft over ground approx.. 5,900 mm<br/>effective width 2,000 mm<br/>pit dimensions 9,900 x 2,750 x 1,300 mm (l x w x h)<br/>transport dimensions, dismantled  16,200 x 2,500 x 2,750 mm (l x w x h)<br/> <br/>overhaul work: <br/>? frame sandblasted, primed and repainted<br/>? chain guide rails renewed<br/>? chain will renewed<br/>? gears will renewed<br/>? rubber belt will renewed<br/> <br/>comments: the steel construction of the conveyor belt was completely overhauled. wearing parts such as chains, gears and rubber belt are renewed when the dimensions for the new location have been determined. at the customers request, the belt can be adapted, shortened or extended.<br/>inspections at our warehouse are possible after agreement. we will not assume liability for the given technical data and possible errors. MANUFACTURER BOLLEGRAAF
TYP HBT 600/2000 X 21,986
YEAR OF CONTRUCTION 2000 (OVERHAULED 2017)
DRIVE POWER 7,5 KW
LENGTH INFEED CONVEYOR OVER ALL 6,723 MM
LENGTH MODULE INFEED CONVEYOR 5,500 MM
HEIGHT INFEED CONVEYOR OVER ALL 1,300 MM
HEIGHT SIDE WALL INFEED CONVEYOR 500 MM
LENGTH ELEVATING CONVEYOR OVER ALL 13,923 MM
LENGHT MODULE ELEVATING CONVEYOR 13,300 MM
HEIGHT SIDE WALL ELEVATING CONVEYOR 800 MM
GRADIENT OF ELEVATING CONVEYOR 30°
LENGTH GOOSENECK 1,340 MM
LENGHT MODULE GOOSENECK 1,000
SLOPE OF GOOSENECK 15°
HEIGHT DRIVE SHAFT OVER GROUND APPROX.. 5,900 MM
EFFECTIVE WIDTH 2,000 MM
PIT DIMENSIONS 9,900 X 2,750 X 1,300 MM (L X W X H)
TRANSPORT DIMENSIONS, DISMANTLED 16,200 X 2,500 X 2,750 MM (L X W X H)

OVERHAUL WORK:
? FRAME SANDBLASTED, PRIMED AND REPAINTED
? CHAIN GUIDE RAILS RENEWED
? CHAIN WILL RENEWED
? GEARS WILL RENEWED
? RUBBER BELT WILL RENEWED

COMMENTS: THE STEEL CONSTRUCTION OF THE CONVEYOR BELT WAS COMPLETELY OVERHAULED. WEARING PARTS SUCH AS CHAINS, GEARS AND RUBBER BELT ARE RENEWED WHEN THE DIMENSIONS FOR THE NEW LOCATION HAVE BEEN DETERMINED. AT THE CUSTOMERS REQUEST, THE BELT CAN BE ADAPTED, SHORTENED OR EXTENDED.
INSPECTIONS AT OUR WAREHOUSE ARE POSSIBLE AFTER AGREEMENT. WE WILL NOT ASSUME LIABILITY FOR THE GIVEN TECHNICAL DATA AND POSSIBLE ERRORS.
Vendedor: OBM Recycling Machinery B.V.
Año de construcción: usado
Ubicación: Land-
complete westfalia  milk  clarifier separator
year 2015
capacity is : 15,000kg/h

working condations

 COMPLETE WESTFALIA MILK CLARIFIER SEPARATOR YEAR 2015 CAPACITY IS : 15,000KG/H WORKING CONDATIONS
Vendedor: Ozbek Machinery Trade
Año de construcción: usado
Ubicación: Land-make mixaco maschinenbau neuenrade, type cm-2000 d, no 22.856, new 1993, cold mixer container mixer (1x), material stainless steel (304), capacity 1600 ltr, useful capacity 800 ltr, vessel sizes dia. 1500x750mm (brand new oem vessel), with cover (jacketed), outlet dia. 300mm, with motor 90 kw, 380 volt, with switchgear , floorspace 3,2x1,8 m, total height 3,0 m, weight 10.000 kg, extra specifications -- reconditioned --cold mixersplastic machinery > cold mixers what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE MIXACO MASCHINENBAU NEUENRADE, TYPE CM-2000 D, NO 22.856, NEW 1993, COLD MIXER CONTAINER MIXER (1X), MATERIAL STAINLESS STEEL (304), CAPACITY 1600 LTR, USEFUL CAPACITY 800 LTR, VESSEL SIZES DIA. 1500X750MM (BRAND NEW OEM VESSEL), WITH COVER (JACKETED), OUTLET DIA. 300MM, WITH MOTOR 90 KW, 380 VOLT, WITH SWITCHGEAR , FLOORSPACE 3,2X1,8 M, TOTAL HEIGHT 3,0 M, WEIGHT 10.000 KG, EXTRA SPECIFICATIONS -- RECONDITIONED --COLD MIXERSPLASTIC MACHINERY > COLD MIXERS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-multi spindle automatic lathe afh 130-8 pour dnt proj. no. 000310 year 1991
8 spindle rotary feeder
collet chuck
in dnt version, no change gears for speed and cycle time required
-1 set of curves for cross slide - 1 set of curves for longitudinal slide high pressure coolant pump
2 sep. control panels
spindle stop setup

balluff cam schaltwerk
wã¶hrle clear text display
 MULTI SPINDLE AUTOMATIC LATHE AFH 130-8 POUR DNT PROJ. NO. 000310 YEAR 1991 8 SPINDLE ROTARY FEEDER COLLET CHUCK IN DNT VERSION, NO CHANGE GEARS FOR SPEED AND CYCLE TIME REQUIRED -1 SET OF CURVES FOR CROSS SLIDE - 1 SET OF CURVES FOR LONGITUDINAL SLIDE HIGH PRESSURE COOLANT PUMP 2 SEP. CONTROL PANELS SPINDLE STOP SETUP BALLUFF CAM SCHALTWERK W&ATILDE;&PARA;HRLE CLEAR TEXT DISPLAY
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 130 mm<br/>gear width: 25 mm<br/>max. module: 4 <br/>min. module: 0,5 <br/>control: 840 d siemens<br/>strokes - infinitely variable: 500-2500 hub/min<br/>stroke: 30 mm<br/>column swivelling: 0-12 grad<br/>work-spindle diameter: 85 mm<br/>total power requirement: 49 kw<br/>weight of the machine ca.: 11.5 t<br/>dimensions of the machine ca.: 6,4 x 4,5 x 4,4 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 130 MM
GEAR WIDTH: 25 MM
MAX. MODULE: 4
MIN. MODULE: 0,5
CONTROL: 840 D SIEMENS
STROKES - INFINITELY VARIABLE: 500-2500 HUB/MIN
STROKE: 30 MM
COLUMN SWIVELLING: 0-12 GRAD
WORK-SPINDLE DIAMETER: 85 MM
TOTAL POWER REQUIREMENT: 49 KW
WEIGHT OF THE MACHINE CA.: 11.5 T
DIMENSIONS OF THE MACHINE CA.: 6,4 X 4,5 X 4,4 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-schã¼tte multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
"" (special) to: 100/63 mm

number of independent cross slide: 6
total / working ways middle and upper carriage up: 32/20 mm
lower carriage up: 40/25 mm

spindle diameter: 224 mm
main time min/max: 0.36/150 sec.
productive time min./max.: 0.45/0.80 sec.

spindle speed from / to: 900-5000 u/min
2. area: 355-2000 u/min

nominal power of the motor: 15 kw
power supply: 50 kva
the drive motor speed: 1500 rpm
length * width (standard execution) 3705 * 1320 mm
incl. rod guide (standard execution) 6335 mm

approximate weight without rod guide and accessories: 4.6 to.
the rod guide approximately: 0.5 to.
total without accessories approx. to 5.1.
(all information according to manufacturer)

beiuyg98hw
equipment:
sub unit with rear processing
thread cutter gearbox with electric clutch
gewindescheidspindel
additional longitudinal slide on location: 1, 2 + 4, 5
discharge
hydraulic part tray in pos 6
force and farmer c02 fire equipment (non-operating)

electrical:

siemens s5 control
camshaft gear: mahani seperate control panel / control panel on the operating side and back
waheed clear text display
electrically prepared for bar loader (n)

other:
prepared for decentralized oil mist separator

machine is in our showroom under power! SCH&ATILDE;&FRAC14;TTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 2.500 €
Ubicación: Land-weight approx.: 1700 kg<br/>dimensions (l x w x h) approx.: 3700 x 1700 x 2500 mm<br/>description: cnc boring machine<br> serial number al1 / 001406<br> working width from 70 mm to 900 mm<br> maximum panel length from 200 mm to 3000 mm<br> maximum thickness from 10 mm to 60 mm<br> universal group for interchangeable heads<br> 12 vertical drills<br> 4 hz-x<br> x-axis scoring group<br> ce standards<br> WEIGHT APPROX.: 1700 KG
DIMENSIONS (L X W X H) APPROX.: 3700 X 1700 X 2500 MM
DESCRIPTION: CNC BORING MACHINE
SERIAL NUMBER AL1 / 001406
WORKING WIDTH FROM 70 MM TO 900 MM
MAXIMUM PANEL LENGTH FROM 200 MM TO 3000 MM
MAXIMUM THICKNESS FROM 10 MM TO 60 MM
UNIVERSAL GROUP FOR INTERCHANGEABLE HEADS
12 VERTICAL DRILLS
4 HZ-X
X-AXIS SCORING GROUP
CE STANDARDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-schuette multi spindle automatic lathe
pour sf 20-6
curve controlled number of spindles: 6

with mechanical transmission

rod diameter: approx. 20 mm
sw 17 mm
ak 18 mm
uk 14 mm

max bar feeder: 80 /(160) mm

independent longitudinal slide number: 6
total / working ways (standart): 63/40 mm
SCHUETTE MULTI SPINDLE AUTOMATIC LATHE POUR SF 20-6 CURVE CONTROLLED NUMBER OF SPINDLES: 6 WITH MECHANICAL TRANSMISSION ROD DIAMETER: APPROX. 20 MM SW 17 MM AK 18 MM UK 14 MM MAX BAR FEEDER: 80 /(160) MM INDEPENDENT LONGITUDINAL SLIDE NUMBER: 6 TOTAL / WORKING WAYS (STANDART): 63/40 MM "" (SPECIAL) TO: 100/63 MM NUMBER OF INDEPENDENT CROSS SLIDE: 6 TOTAL / WORKING WAYS MIDDLE AND UPPER CARRIAGE UP: 32/20 MM LOWER CARRIAGE UP: 40/25 MM SPINDLE DIAMETER: 224 MM MAIN TIME MIN/MAX: 0.36/150 SEC. PRODUCTIVE TIME MIN./MAX.: 0.45/0.80 SEC. SPINDLE SPEED FROM / TO: 900-5000 U/MIN 2. AREA: 355-2000 U/MIN NOMINAL POWER OF THE MOTOR: 15 KW POWER SUPPLY: 50 KVA THE DRIVE MOTOR SPEED: 1500 RPM LENGTH * WIDTH (STANDARD EXECUTION) 3705 * 1320 MM INCL. ROD GUIDE (STANDARD EXECUTION) 6335 MM APPROXIMATE WEIGHT WITHOUT ROD GUIDE AND ACCESSORIES: 4.6 TO. THE ROD GUIDE APPROXIMATELY: 0.5 TO. TOTAL WITHOUT ACCESSORIES APPROX. TO 5.1. (ALL INFORMATION ACCORDING TO MANUFACTURER) BEIUYG98HW EQUIPMENT: SUB UNIT WITH REAR PROCESSING THREAD CUTTER GEARBOX WITH ELECTRIC CLUTCH GEWINDESCHEIDSPINDEL ADDITIONAL LONGITUDINAL SLIDE ON LOCATION: 1, 2 + 4, 5 DISCHARGE HYDRAULIC PART TRAY IN POS 6 FORCE AND FARMER C02 FIRE EQUIPMENT (NON-OPERATING) ELECTRICAL: SIEMENS S5 CONTROL CAMSHAFT GEAR: MAHANI SEPERATE CONTROL PANEL / CONTROL PANEL ON THE OPERATING SIDE AND BACK WAHEED CLEAR TEXT DISPLAY ELECTRICALLY PREPARED FOR BAR LOADER (N) OTHER: PREPARED FOR DECENTRALIZED OIL MIST SEPARATOR MACHINE IS IN OUR SHOWROOM UNDER POWER!
Vendedor: turn-tec Produktion & Service GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 20 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 400x200x200 mm<br/>description: 4 pieces, für magnett drill gear details see pictures WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 400X200X200 MM
DESCRIPTION: 4 PIECES, FüR MAGNETT DRILL GEAR DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ionized air can rinser trans-tech hysek 120 000 cph
 
this german built trans-tech can rinser with 2x bmh empty can inverters was built and installed in 2011. it is in excellent conditions. it comes with a 180 degree can twister on the top part, the ionized air rinser (with pumps and treatment) and a 180 degree upright twister on the bottom of the rinser. the platform and supports are included. the equipment is installed and in use, and can be inspected in operation.
 
make: trans-tech hysek and bmh feed gear
manufacturing year: 2011
capacity: up to 2.000 can per minute (120 000 cph)
running hours: less than 8.000 hrs
container handling: 8oz – 66mm diameter / 87mm height
350ml – 66 mm diameter / 122 mm height
473ml – 66 mm diameter / 157 mm height
10.5oz – 57 mm diameter / 138 mm heigth
electricity: 460 v / 60 hz   IONIZED AIR CAN RINSER TRANS-TECH HYSEK 120 000 CPH THIS GERMAN BUILT TRANS-TECH CAN RINSER WITH 2X BMH EMPTY CAN INVERTERS WAS BUILT AND INSTALLED IN 2011. IT IS IN EXCELLENT CONDITIONS. IT COMES WITH A 180 DEGREE CAN TWISTER ON THE TOP PART, THE IONIZED AIR RINSER (WITH PUMPS AND TREATMENT) AND A 180 DEGREE UPRIGHT TWISTER ON THE BOTTOM OF THE RINSER. THE PLATFORM AND SUPPORTS ARE INCLUDED. THE EQUIPMENT IS INSTALLED AND IN USE, AND CAN BE INSPECTED IN OPERATION. MAKE: TRANS-TECH HYSEK AND BMH FEED GEAR MANUFACTURING YEAR: 2011 CAPACITY: UP TO 2.000 CAN PER MINUTE (120 000 CPH) RUNNING HOURS: LESS THAN 8.000 HRS CONTAINER HANDLING: 8OZ – 66MM DIAMETER / 87MM HEIGHT 350ML – 66 MM DIAMETER / 122 MM HEIGHT 473ML – 66 MM DIAMETER / 157 MM HEIGHT 10.5OZ – 57 MM DIAMETER / 138 MM HEIGTH ELECTRICITY: 460 V / 60 HZ
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 20 €
Ubicación: Land-weight approx.: 20 kg<br/>dimensions (l x w x h) approx.: 400x200x200 mm<br/>description: 4 pieces, für magnett drill gear details see pictures WEIGHT APPROX.: 20 KG
DIMENSIONS (L X W X H) APPROX.: 400X200X200 MM
DESCRIPTION: 4 PIECES, FüR MAGNETT DRILL GEAR DETAILS SEE PICTURES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gebr. aluminium circular saw make mountain schmidmodell velox. no.: 62219 built 1986sã¤geblatt-ã?350 mmgehrungsschnitt re.   li. vert 45 â°. swivel gear head for schrã¤gschnitt45 â° linksschnitt - ã?: 90 â° rund130 mm45 â° rund120 from mm45 â° gear head at 45 â° stellung105 mm90 â° flach200 x 80 mm45 â° flach130 x 80 mmsã¤geblattdrehzahl1400/2800 upmmotor380 v1, 5 / 1.8 kwauã?enmaã?e: breite800 mmtiefe900 mmhã¶he1500 mmgewicht ca. 213 kgmit: doppelspanneinrichtungrollbahnen total length 3800 mm  GEBR. ALUMINIUM CIRCULAR SAW MAKE MOUNTAIN SCHMIDMODELL VELOX. NO.: 62219 BUILT 1986S&ATILDE;&CURREN;GEBLATT-&ATILDE;?350 MMGEHRUNGSSCHNITT RE. LI. VERT 45 &ACIRC;&DEG;. SWIVEL GEAR HEAD FOR SCHR&ATILDE;&CURREN;GSCHNITT45 &ACIRC;&DEG; LINKSSCHNITT - &ATILDE;?: 90 &ACIRC;&DEG; RUND130 MM45 &ACIRC;&DEG; RUND120 FROM MM45 &ACIRC;&DEG; GEAR HEAD AT 45 &ACIRC;&DEG; STELLUNG105 MM90 &ACIRC;&DEG; FLACH200 X 80 MM45 &ACIRC;&DEG; FLACH130 X 80 MMS&ATILDE;&CURREN;GEBLATTDREHZAHL1400/2800 UPMMOTOR380 V1, 5 / 1.8 KWAU&ATILDE;?ENMA&ATILDE;?E: BREITE800 MMTIEFE900 MMH&ATILDE;&PARA;HE1500 MMGEWICHT CA. 213 KGMIT: DOPPELSPANNEINRICHTUNGROLLBAHNEN TOTAL LENGTH 3800 MM
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: used machinery auction RESALE 2.200 €
Ubicación: Land-weight approx.: 3300 kg<br/>dimensions (l x w x h) approx.: 5000 x 5000 x 2300 mm<br/>description: <h3>klopp-korradi uw 3 cnc-universal milling machine</h3> - machine no.: 54101<br> <br> - control system: siemens sinumerik 820 m<br> <br> technical data:<br> - spindle-speed 20-4000 upm<br> - feed x,y,z -axis 1-2000 mm/min, 4.achse 1-2000 °/min<br> - fast gear x,y,z -achse 7000 mm/min, 4.achse 1-2000 °/min<br> <br> electrical data:<br> - connected load: 15 kw<br> <br> - operating hours approx.: 120<br> - with documentation [see pdf file]<br> - attention: backup battery is empty, parameter data are missing<br> WEIGHT APPROX.: 3300 KG
DIMENSIONS (L X W X H) APPROX.: 5000 X 5000 X 2300 MM
DESCRIPTION:

KLOPP-KORRADI UW 3 CNC-UNIVERSAL MILLING MACHINE

- MACHINE NO.: 54101

- CONTROL SYSTEM: SIEMENS SINUMERIK 820 M

TECHNICAL DATA:
- SPINDLE-SPEED 20-4000 UPM
- FEED X,Y,Z -AXIS 1-2000 MM/MIN, 4.ACHSE 1-2000 °/MIN
- FAST GEAR X,Y,Z -ACHSE 7000 MM/MIN, 4.ACHSE 1-2000 °/MIN

ELECTRICAL DATA:
- CONNECTED LOAD: 15 KW

- OPERATING HOURS APPROX.: 120
- WITH DOCUMENTATION [SEE PDF FILE]
- ATTENTION: BACKUP BATTERY IS EMPTY, PARAMETER DATA ARE MISSING
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-rotary lobe pump, stainless steel, shaft seal: mechanical seal,
connections 65 mm diam., on base plate with sew geared motor,.
7.5 kw, 344 rpm, 380/660 v, 50 hz, ip55. 
total weight: 225 kg.
capacity: 170 l/min at 5 bar.   
max working pressure 20 bar.
this pump has never been in use.  ROTARY LOBE PUMP, STAINLESS STEEL, SHAFT SEAL: MECHANICAL SEAL, CONNECTIONS 65 MM DIAM., ON BASE PLATE WITH SEW GEARED MOTOR,. 7.5 KW, 344 RPM, 380/660 V, 50 HZ, IP55. TOTAL WEIGHT: 225 KG. CAPACITY: 170 L/MIN AT 5 BAR. MAX WORKING PRESSURE 20 BAR. THIS PUMP HAS NEVER BEEN IN USE.
Vendedor: Omnytec BV
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 540 mm<br />-bearing load max. 5,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-2 pieces car available<br />-prize piece<br />-external dimensions 3020/1250 / h540 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 540 MM
-BEARING LOAD MAX. 5,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-2 PIECES CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 3020/1250 / H540 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 6.700 €
Ubicación: Land-gear hobber mikron type 102 (102.04) :

- right and helical wheels, max diameter : 120 [mm]
- max cutting length : 130 [mm]
- number of teeth : from 6 to 325
- feed : 7 from 0.05 to 0.6 [mm]
- milling rotation speeds : 10 from 140 - 1870 [rpm]
- pitch of the helix : 2 - 5000 [mm]
- angle of the pitch of the helix (left/right) : 0 - 90 [°]
- max module : 2
- size : 0.615 x 1 x 1.5 [m]
- weight : 620 [kg]

machine in nice condition, visible under power for inspection.

shipping in europe is possible.

more pictures and details on request.

prix vat excluded, ex works loading on truck included.
 GEAR HOBBER MIKRON TYPE 102 (102.04) : - RIGHT AND HELICAL WHEELS, MAX DIAMETER : 120 [MM] - MAX CUTTING LENGTH : 130 [MM] - NUMBER OF TEETH : FROM 6 TO 325 - FEED : 7 FROM 0.05 TO 0.6 [MM] - MILLING ROTATION SPEEDS : 10 FROM 140 - 1870 [RPM] - PITCH OF THE HELIX : 2 - 5000 [MM] - ANGLE OF THE PITCH OF THE HELIX (LEFT/RIGHT) : 0 - 90 [°] - MAX MODULE : 2 - SIZE : 0.615 X 1 X 1.5 [M] - WEIGHT : 620 [KG] MACHINE IN NICE CONDITION, VISIBLE UNDER POWER FOR INSPECTION. SHIPPING IN EUROPE IS POSSIBLE. MORE PICTURES AND DETAILS ON REQUEST. PRIX VAT EXCLUDED, EX WORKS LOADING ON TRUCK INCLUDED.
Vendedor: SARL Kraffter
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 4000 x 2000 mm<br />-loading height 650 mm<br />-bearing load max. 12,000 kg<br />-full rubber tires<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-external dimensions 4680/2000 / h650 mm<br />-eigen weight 1440 kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 4000 X 2000 MM
-LOADING HEIGHT 650 MM
-BEARING LOAD MAX. 12,000 KG
-FULL RUBBER TIRES
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-EXTERNAL DIMENSIONS 4680/2000 / H650 MM
-EIGEN WEIGHT 1440 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-
complete uht processing line by tetra pak
3.200 l/h - 7,000 l / h

200 ml, 250 ml, 500 ml

including all machines and accessories:

-ta flex 10 tetra therm aseptic flex
-tetra tray shrink 51
-tetra pak homogenising
-tetra pak alcip 10 cip module
-tetra pak helix accumulator ache
-tetra pak cap applicator
-tetra cardboard packer
-tetra pak a3 flex
-gea grasso chilled water compressor
-conversion kits for tetra pak a3 flex
-1 x 250 ml
-1 x 500 ml
 COMPLETE UHT PROCESSING LINE BY TETRA PAK 3.200 L/H - 7,000 L / H 200 ML, 250 ML, 500 ML INCLUDING ALL MACHINES AND ACCESSORIES: -TA FLEX 10 TETRA THERM ASEPTIC FLEX -TETRA TRAY SHRINK 51 -TETRA PAK HOMOGENISING -TETRA PAK ALCIP 10 CIP MODULE -TETRA PAK HELIX ACCUMULATOR ACHE -TETRA PAK CAP APPLICATOR -TETRA CARDBOARD PACKER -TETRA PAK A3 FLEX -GEA GRASSO CHILLED WATER COMPRESSOR -CONVERSION KITS FOR TETRA PAK A3 FLEX -1 X 250 ML -1 X 500 ML
Vendedor: Merx Handel & Industrie GmbH
Año de construcción: usado
Ubicación: Land-platform trucks, transport trucks, heavy trucks, table trolleys, assembly cars, industrial trailers<br /><br />-industrial trailer with 2-axle steering<br />-platform 6200 x 2480 mm<br />-loading height 915 mm<br />-bearing load max. 50,000 kg<br />-full rubber tires 620/200-410 stb-mh20-a-robust<br />-drawbar as interchangeable drawbar<br />-1 piece car available<br />-prize piece<br />-outer dimensions 6800/2480 / h915 mm<br />-eigen weight kg PLATFORM TRUCKS, TRANSPORT TRUCKS, HEAVY TRUCKS, TABLE TROLLEYS, ASSEMBLY CARS, INDUSTRIAL TRAILERS

-INDUSTRIAL TRAILER WITH 2-AXLE STEERING
-PLATFORM 6200 X 2480 MM
-LOADING HEIGHT 915 MM
-BEARING LOAD MAX. 50,000 KG
-FULL RUBBER TIRES 620/200-410 STB-MH20-A-ROBUST
-DRAWBAR AS INTERCHANGEABLE DRAWBAR
-1 PIECE CAR AVAILABLE
-PRIZE PIECE
-OUTER DIMENSIONS 6800/2480 / H915 MM
-EIGEN WEIGHT KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 6.000 €
Ubicación: Land-mercury auctions is taking care of the sale of the warehouses and numerous equipment of the enel thermoelectric power station in genoa, next april 16 at the headquarters in genoa in via all'ex idroscalo. 
the visions of the goods are organized on tuesday 12, 19, 26 march and on 2 and 9 april, from 9 to 12 and from 13 to 15, by appointment only. 
- nr. 6 large gearboxes (transmission ratio 1/14)
- nr. 3 medium size and others small size
many lots will be on sale, a complete catalogue of which is published on our website or contact us at 030 7751645 during office hours 9-13, 14:18.
  MERCURY AUCTIONS IS TAKING CARE OF THE SALE OF THE WAREHOUSES AND NUMEROUS EQUIPMENT OF THE ENEL THERMOELECTRIC POWER STATION IN GENOA, NEXT APRIL 16 AT THE HEADQUARTERS IN GENOA IN VIA ALL'EX IDROSCALO. THE VISIONS OF THE GOODS ARE ORGANIZED ON TUESDAY 12, 19, 26 MARCH AND ON 2 AND 9 APRIL, FROM 9 TO 12 AND FROM 13 TO 15, BY APPOINTMENT ONLY. - NR. 6 LARGE GEARBOXES (TRANSMISSION RATIO 1/14) - NR. 3 MEDIUM SIZE AND OTHERS SMALL SIZE MANY LOTS WILL BE ON SALE, A COMPLETE CATALOGUE OF WHICH IS PUBLISHED ON OUR WEBSITE OR CONTACT US AT 030 7751645 DURING OFFICE HOURS 9-13, 14:18.
Vendedor: Mercury Auctions s.r.l.
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-geared motor, electric motor, three-phase motor<br /><br />-speed 105 u / min<br />-output 7.5 kw<br />-type b3 angle<br />-diameter shaft Ø 55 mm<br />-protection class ip55<br />-dimensions 750/500 / h370 mm<br />-weight 190 kg GEARED MOTOR, ELECTRIC MOTOR, THREE-PHASE MOTOR

-SPEED 105 U / MIN
-OUTPUT 7.5 KW
-TYPE B3 ANGLE
-DIAMETER SHAFT Ø 55 MM
-PROTECTION CLASS IP55
-DIMENSIONS 750/500 / H370 MM
-WEIGHT 190 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-cassette for warehouse, about 1,539 cassettes, cassette length 6, 50 m, 3, 000 kg/kasstte - used -:
 
price on request!
 
manufacturer: fehr
year of construction: 2001
cassettes ges. 1,539 units
specification
1 electrically operated double table long good stack machine, automatically controlled, for the storage and retrieval of for good material, with the help of cassettes
technical data:
capacity 2x3000kg
bottom load table position above ground 700 mm
top load table position above ground 12110 mm
room height 13'450 mm
lifting speed 35 m / min
travel speed 80 m / min
pull-out speed 85 m / min
operating voltage, three-phase 400 v / 50 hz
control voltage 230 v / 50 hz
24 v dc
cassette type internal dimensions (wxhxl) a 520 x 270 x 6500 mm
type b 520 x 520 x 6500 mm
device performance at 100% load 46 ds / h
according to fem based on ub-3000 9.851
pull-out force on the cassette gripper (20% of the payload plus cartridge weight)
 
control automatically arranged using an automatic control over operating terminal, at the camp office
1. 1 double-sided track, length approx 29 m
to hang up on the concrete floor, consisting of:
the two rails of a 55, with the shocks, complete with attachment fittings and the limit stops. the rails are with fade-free special grout under poured.
2. 1 longitudinal-power supply, length approx 29 m, consisting of:
vahle plastic conductor line, with guard, complete with the mounting brackets.
3. 1 long goods stacking devices, consisting of:
camp 2 head straps welded design, with the chassis, this consisting of wã¤lzge controlled from the two engines with shaft mounted gearboxes built-on, as well as the 4 - crane wheels, with leadership roles, running laterally on the road,
2 columns in welded box construction, with the guides for the lifters from material performed st 52.3, screwed on the head straps, including the stiffening frame, as well as a ladder of descent,.
1 pallet truck, consisting of: the steel construction with the necessary rubber buffers for the two hã¶henend positions, the roller bearing support and leadership roles, the double cassette table with glides, the extractor, the centering with side guard rails to complete the box, complete with the runners for the gripper, the drive motors, sprockets, shafts, chains and electrical installation,
controls the horizontal, which â«fachbelegtâ».
as a hoist is used:
1 controlled engine
with intermediate gear (designed according to fem 3 m) and drum includes cords and ball-bearing pulleys; security 12, with double-grooved rope drum, dust-protected bearings drum bearing,
rope pulleys conditions according to din 15020.
4. electrical installation, comprising:
-the special cables, including all required terminal boxes, connecting cables fixed installed on the device
-the flexible power supply in cable caterpillar to the trucks,
-completely wired cabinet incl. contactor and the necessary controls, the mushroom-head pushbutton, which shuts off the main contactor (red mushroom can be rotated), switch with push button, key switch
-the two key selector switches, which are used for the pre-selection of the operating modes â«tip operation/automatic modeâ»,
the limit switches for the limitation of the lifting and moving
-the reciprocal locking of lifting and suspension compared to the ausziehvorâ¬
-direction, the laterally mounted clamping wires to the continuous control of the speed profile
-the profile control, which monitors whether the space between the shelf and device is free,
-the output fuse, which prevents that cassettes in a free space be outsourced,
-excess height control, which prevents a training and storage of high-loaded cartridges,
-the control of tape position on the table,
-the fault indicator in the control panel on the lift truck,
-the operating hour counters for driving and lifting mechanism
displacement measuring systems
the wear-free optical measuring system guarantees maximum service life and precise way capture of the x - and y-coordinates. the way capture of the two gripper through the absolute value encoder is located in the millimetre range. both systems deliver the absolutely correct readings again even after a power failure. thus it takes no movements for repositioning and the device starts working immediately without delay.
driving behavior
driving in the x and y axes is such that at the maximum possible speed infinitely variable over short or long distances optimal speed curves are driven. the behavior of the device dimensions at various distances is taken into account and flows as a control variable with a. the pendulum effect is compensated with counteract the driving curve characteristics,
learning functions
the computer software is so forward-looking that hardly a parameterization of various sizes must be done by the programmer. the software adaptation to different design types of device and storage compartments is done through the learning and self-learning onsite. following learning processes take place during commissioning on site:
-self-learning of the xy-driving behavior
-learning of the gripper behavior
-learning the transfer and recording places of the periphery
self learning the topology of all storage compartments of different arrangement and sizes
operating modes
-jog
the long good stacking device in the direction of travel, the truck and the two pull-out devices can be moved with the control buttons.
-semi automatic (automatic start-up), arranged in the stationary cupboard.
with the hand-held micro terminal, various movements are run separately or in combination automatically:
-driving horizontal
vertical lifting/lowering
-pull cassette
-slide tape
-positioning in front of the nearest
option
pc-cabinet for m fs calculator
execution: wxhxd 600 x 1900 x 600 mm
4-field 17 "monitor field of vision
part of front door for computer unit
integrated keyboard tray
storage compartment with removable rails
socket 100 mm
(ii) peripheral components, including:
1 1 carousel ka-3000 gr gr
for cassettes with rods
technical data:
capacity/capacity 3000 kg
number of pitches 4
conveying speed along 24 m / min
cross conveyor speed 40 m / min
height from top of floor 700 mm
operating voltage 400 v / 50 hz
control voltage 230 v / 50 hz
the cartridge space tracking via the automatic control. the carousel consists in particular of:
outsourcing train, consisting of:
-the steel foot plates and anchors, directly on the ground turned off and integrated into the shelf, suitable for the installation of the required mechanical parts
-the spezialgleitem, as well as the lateral guide
-the gripper mechanism, which contains the tape and transported to the next position positively
the gear motor with chain, the sprocket wheels and the chain guide
cross conveyor belt, comprising;
-two cassette courses, one of them as work provided
-the steel construction incl. foot plates and anchors, placed directly on the floor, suitable for the installation of the required mechanical parts
-the special gliders, as well as the lateral guide
-the querverschiebebalken as a driver for the cassettes
-the drive motor with the required drive elements
-the mechanical preparations for the load cells installation at the workplace
storage car, running such as paging railway
electrical control consisting of:
-the control panel with push buttons for all individual movements, including on/off button and emergency push button
-the position and control switches
-power and control supply
-firmly installed control cabinets with built-in control
-the necessary cables, as well as the internal wiring
the safety light barrier incl. mounting brackets, which perceives the person protection during cartridge movement
 
condition: used, the last maintenance was performed in 2017, shortly after it was mined professionally, so that it can be rebuilt at any time. the company which has degraded the plant could perform the installation.
available: available now
location: nuremberg CASSETTE FOR WAREHOUSE, ABOUT 1,539 CASSETTES, CASSETTE LENGTH 6, 50 M, 3, 000 KG/KASSTTE - USED -: PRICE ON REQUEST! MANUFACTURER: FEHR YEAR OF CONSTRUCTION: 2001 CASSETTES GES. 1,539 UNITS SPECIFICATION 1 ELECTRICALLY OPERATED DOUBLE TABLE LONG GOOD STACK MACHINE, AUTOMATICALLY CONTROLLED, FOR THE STORAGE AND RETRIEVAL OF FOR GOOD MATERIAL, WITH THE HELP OF CASSETTES TECHNICAL DATA: CAPACITY 2X3000KG BOTTOM LOAD TABLE POSITION ABOVE GROUND 700 MM TOP LOAD TABLE POSITION ABOVE GROUND 12110 MM ROOM HEIGHT 13'450 MM LIFTING SPEED 35 M / MIN TRAVEL SPEED 80 M / MIN PULL-OUT SPEED 85 M / MIN OPERATING VOLTAGE, THREE-PHASE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ 24 V DC CASSETTE TYPE INTERNAL DIMENSIONS (WXHXL) A 520 X 270 X 6500 MM TYPE B 520 X 520 X 6500 MM DEVICE PERFORMANCE AT 100% LOAD 46 DS / H ACCORDING TO FEM BASED ON UB-3000 9.851 PULL-OUT FORCE ON THE CASSETTE GRIPPER (20% OF THE PAYLOAD PLUS CARTRIDGE WEIGHT) CONTROL AUTOMATICALLY ARRANGED USING AN AUTOMATIC CONTROL OVER OPERATING TERMINAL, AT THE CAMP OFFICE 1. 1 DOUBLE-SIDED TRACK, LENGTH APPROX 29 M TO HANG UP ON THE CONCRETE FLOOR, CONSISTING OF: THE TWO RAILS OF A 55, WITH THE SHOCKS, COMPLETE WITH ATTACHMENT FITTINGS AND THE LIMIT STOPS. THE RAILS ARE WITH FADE-FREE SPECIAL GROUT UNDER POURED. 2. 1 LONGITUDINAL-POWER SUPPLY, LENGTH APPROX 29 M, CONSISTING OF: VAHLE PLASTIC CONDUCTOR LINE, WITH GUARD, COMPLETE WITH THE MOUNTING BRACKETS. 3. 1 LONG GOODS STACKING DEVICES, CONSISTING OF: CAMP 2 HEAD STRAPS WELDED DESIGN, WITH THE CHASSIS, THIS CONSISTING OF W&ATILDE;&CURREN;LZGE CONTROLLED FROM THE TWO ENGINES WITH SHAFT MOUNTED GEARBOXES BUILT-ON, AS WELL AS THE 4 - CRANE WHEELS, WITH LEADERSHIP ROLES, RUNNING LATERALLY ON THE ROAD, 2 COLUMNS IN WELDED BOX CONSTRUCTION, WITH THE GUIDES FOR THE LIFTERS FROM MATERIAL PERFORMED ST 52.3, SCREWED ON THE HEAD STRAPS, INCLUDING THE STIFFENING FRAME, AS WELL AS A LADDER OF DESCENT,. 1 PALLET TRUCK, CONSISTING OF: THE STEEL CONSTRUCTION WITH THE NECESSARY RUBBER BUFFERS FOR THE TWO H&ATILDE;&PARA;HENEND POSITIONS, THE ROLLER BEARING SUPPORT AND LEADERSHIP ROLES, THE DOUBLE CASSETTE TABLE WITH GLIDES, THE EXTRACTOR, THE CENTERING WITH SIDE GUARD RAILS TO COMPLETE THE BOX, COMPLETE WITH THE RUNNERS FOR THE GRIPPER, THE DRIVE MOTORS, SPROCKETS, SHAFTS, CHAINS AND ELECTRICAL INSTALLATION, CONTROLS THE HORIZONTAL, WHICH &ACIRC;&LAQUO;FACHBELEGT&ACIRC;&RAQUO;. AS A HOIST IS USED: 1 CONTROLLED ENGINE WITH INTERMEDIATE GEAR (DESIGNED ACCORDING TO FEM 3 M) AND DRUM INCLUDES CORDS AND BALL-BEARING PULLEYS; SECURITY 12, WITH DOUBLE-GROOVED ROPE DRUM, DUST-PROTECTED BEARINGS DRUM BEARING, ROPE PULLEYS CONDITIONS ACCORDING TO DIN 15020. 4. ELECTRICAL INSTALLATION, COMPRISING: -THE SPECIAL CABLES, INCLUDING ALL REQUIRED TERMINAL BOXES, CONNECTING CABLES FIXED INSTALLED ON THE DEVICE -THE FLEXIBLE POWER SUPPLY IN CABLE CATERPILLAR TO THE TRUCKS, -COMPLETELY WIRED CABINET INCL. CONTACTOR AND THE NECESSARY CONTROLS, THE MUSHROOM-HEAD PUSHBUTTON, WHICH SHUTS OFF THE MAIN CONTACTOR (RED MUSHROOM CAN BE ROTATED), SWITCH WITH PUSH BUTTON, KEY SWITCH -THE TWO KEY SELECTOR SWITCHES, WHICH ARE USED FOR THE PRE-SELECTION OF THE OPERATING MODES &ACIRC;&LAQUO;TIP OPERATION/AUTOMATIC MODE&ACIRC;&RAQUO;, THE LIMIT SWITCHES FOR THE LIMITATION OF THE LIFTING AND MOVING -THE RECIPROCAL LOCKING OF LIFTING AND SUSPENSION COMPARED TO THE AUSZIEHVOR&ACIRC;&NOT; -DIRECTION, THE LATERALLY MOUNTED CLAMPING WIRES TO THE CONTINUOUS CONTROL OF THE SPEED PROFILE -THE PROFILE CONTROL, WHICH MONITORS WHETHER THE SPACE BETWEEN THE SHELF AND DEVICE IS FREE, -THE OUTPUT FUSE, WHICH PREVENTS THAT CASSETTES IN A FREE SPACE BE OUTSOURCED, -EXCESS HEIGHT CONTROL, WHICH PREVENTS A TRAINING AND STORAGE OF HIGH-LOADED CARTRIDGES, -THE CONTROL OF TAPE POSITION ON THE TABLE, -THE FAULT INDICATOR IN THE CONTROL PANEL ON THE LIFT TRUCK, -THE OPERATING HOUR COUNTERS FOR DRIVING AND LIFTING MECHANISM DISPLACEMENT MEASURING SYSTEMS THE WEAR-FREE OPTICAL MEASURING SYSTEM GUARANTEES MAXIMUM SERVICE LIFE AND PRECISE WAY CAPTURE OF THE X - AND Y-COORDINATES. THE WAY CAPTURE OF THE TWO GRIPPER THROUGH THE ABSOLUTE VALUE ENCODER IS LOCATED IN THE MILLIMETRE RANGE. BOTH SYSTEMS DELIVER THE ABSOLUTELY CORRECT READINGS AGAIN EVEN AFTER A POWER FAILURE. THUS IT TAKES NO MOVEMENTS FOR REPOSITIONING AND THE DEVICE STARTS WORKING IMMEDIATELY WITHOUT DELAY. DRIVING BEHAVIOR DRIVING IN THE X AND Y AXES IS SUCH THAT AT THE MAXIMUM POSSIBLE SPEED INFINITELY VARIABLE OVER SHORT OR LONG DISTANCES OPTIMAL SPEED CURVES ARE DRIVEN. THE BEHAVIOR OF THE DEVICE DIMENSIONS AT VARIOUS DISTANCES IS TAKEN INTO ACCOUNT AND FLOWS AS A CONTROL VARIABLE WITH A. THE PENDULUM EFFECT IS COMPENSATED WITH COUNTERACT THE DRIVING CURVE CHARACTERISTICS, LEARNING FUNCTIONS THE COMPUTER SOFTWARE IS SO FORWARD-LOOKING THAT HARDLY A PARAMETERIZATION OF VARIOUS SIZES MUST BE DONE BY THE PROGRAMMER. THE SOFTWARE ADAPTATION TO DIFFERENT DESIGN TYPES OF DEVICE AND STORAGE COMPARTMENTS IS DONE THROUGH THE LEARNING AND SELF-LEARNING ONSITE. FOLLOWING LEARNING PROCESSES TAKE PLACE DURING COMMISSIONING ON SITE: -SELF-LEARNING OF THE XY-DRIVING BEHAVIOR -LEARNING OF THE GRIPPER BEHAVIOR -LEARNING THE TRANSFER AND RECORDING PLACES OF THE PERIPHERY SELF LEARNING THE TOPOLOGY OF ALL STORAGE COMPARTMENTS OF DIFFERENT ARRANGEMENT AND SIZES OPERATING MODES -JOG THE LONG GOOD STACKING DEVICE IN THE DIRECTION OF TRAVEL, THE TRUCK AND THE TWO PULL-OUT DEVICES CAN BE MOVED WITH THE CONTROL BUTTONS. -SEMI AUTOMATIC (AUTOMATIC START-UP), ARRANGED IN THE STATIONARY CUPBOARD. WITH THE HAND-HELD MICRO TERMINAL, VARIOUS MOVEMENTS ARE RUN SEPARATELY OR IN COMBINATION AUTOMATICALLY: -DRIVING HORIZONTAL VERTICAL LIFTING/LOWERING -PULL CASSETTE -SLIDE TAPE -POSITIONING IN FRONT OF THE NEAREST OPTION PC-CABINET FOR M FS CALCULATOR EXECUTION: WXHXD 600 X 1900 X 600 MM 4-FIELD 17 "MONITOR FIELD OF VISION PART OF FRONT DOOR FOR COMPUTER UNIT INTEGRATED KEYBOARD TRAY STORAGE COMPARTMENT WITH REMOVABLE RAILS SOCKET 100 MM (II) PERIPHERAL COMPONENTS, INCLUDING: 1 1 CAROUSEL KA-3000 GR GR FOR CASSETTES WITH RODS TECHNICAL DATA: CAPACITY/CAPACITY 3000 KG NUMBER OF PITCHES 4 CONVEYING SPEED ALONG 24 M / MIN CROSS CONVEYOR SPEED 40 M / MIN HEIGHT FROM TOP OF FLOOR 700 MM OPERATING VOLTAGE 400 V / 50 HZ CONTROL VOLTAGE 230 V / 50 HZ THE CARTRIDGE SPACE TRACKING VIA THE AUTOMATIC CONTROL. THE CAROUSEL CONSISTS IN PARTICULAR OF: OUTSOURCING TRAIN, CONSISTING OF: -THE STEEL FOOT PLATES AND ANCHORS, DIRECTLY ON THE GROUND TURNED OFF AND INTEGRATED INTO THE SHELF, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPEZIALGLEITEM, AS WELL AS THE LATERAL GUIDE -THE GRIPPER MECHANISM, WHICH CONTAINS THE TAPE AND TRANSPORTED TO THE NEXT POSITION POSITIVELY THE GEAR MOTOR WITH CHAIN, THE SPROCKET WHEELS AND THE CHAIN GUIDE CROSS CONVEYOR BELT, COMPRISING; -TWO CASSETTE COURSES, ONE OF THEM AS WORK PROVIDED -THE STEEL CONSTRUCTION INCL. FOOT PLATES AND ANCHORS, PLACED DIRECTLY ON THE FLOOR, SUITABLE FOR THE INSTALLATION OF THE REQUIRED MECHANICAL PARTS -THE SPECIAL GLIDERS, AS WELL AS THE LATERAL GUIDE -THE QUERVERSCHIEBEBALKEN AS A DRIVER FOR THE CASSETTES -THE DRIVE MOTOR WITH THE REQUIRED DRIVE ELEMENTS -THE MECHANICAL PREPARATIONS FOR THE LOAD CELLS INSTALLATION AT THE WORKPLACE STORAGE CAR, RUNNING SUCH AS PAGING RAILWAY ELECTRICAL CONTROL CONSISTING OF: -THE CONTROL PANEL WITH PUSH BUTTONS FOR ALL INDIVIDUAL MOVEMENTS, INCLUDING ON/OFF BUTTON AND EMERGENCY PUSH BUTTON -THE POSITION AND CONTROL SWITCHES -POWER AND CONTROL SUPPLY -FIRMLY INSTALLED CONTROL CABINETS WITH BUILT-IN CONTROL -THE NECESSARY CABLES, AS WELL AS THE INTERNAL WIRING THE SAFETY LIGHT BARRIER INCL. MOUNTING BRACKETS, WHICH PERCEIVES THE PERSON PROTECTION DURING CARTRIDGE MOVEMENT CONDITION: USED, THE LAST MAINTENANCE WAS PERFORMED IN 2017, SHORTLY AFTER IT WAS MINED PROFESSIONALLY, SO THAT IT CAN BE REBUILT AT ANY TIME. THE COMPANY WHICH HAS DEGRADED THE PLANT COULD PERFORM THE INSTALLATION. AVAILABLE: AVAILABLE NOW LOCATION: NUREMBERG
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: 100 mm<br/>max. module: 1 <br/>min. module: 10 <br/>control: siemens sps control (s 7) <br/>total power requirement: 3 kw<br/>weight of the machine ca.: 1.800 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: 100 MM
MAX. MODULE: 1
MIN. MODULE: 10
CONTROL: SIEMENS SPS CONTROL (S 7)
TOTAL POWER REQUIREMENT: 3 KW
WEIGHT OF THE MACHINE CA.: 1.800 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-year 1981, with various removable wheels.
max frã¤sbarer workpiece diameter. 40 mm (46 mm)
max workpiece length 75 mm (110 mm)
max can be milled workpiece length 40 mm
max frã¤sbares module 1
maximum cutter diameter. 32 mm (40 mm)
max milling width 15 mm
shifting 12 mm
spindle tiltable +-6â°
milling cutter speeds of 400-4800 rpm.
radial &amp; axial feed rates of 0-4 mm / sec.
tailstock spindle stroke 30 mm (60 mm)
tailstock moved 61 mm
weight 800 kg
accessories: coolant system, various recordings, feeder rail. YEAR 1981, WITH VARIOUS REMOVABLE WHEELS. MAX FR&ATILDE;&CURREN;SBARER WORKPIECE DIAMETER. 40 MM (46 MM) MAX WORKPIECE LENGTH 75 MM (110 MM) MAX CAN BE MILLED WORKPIECE LENGTH 40 MM MAX FR&ATILDE;&CURREN;SBARES MODULE 1 MAXIMUM CUTTER DIAMETER. 32 MM (40 MM) MAX MILLING WIDTH 15 MM SHIFTING 12 MM SPINDLE TILTABLE +-6&ACIRC;&DEG; MILLING CUTTER SPEEDS OF 400-4800 RPM. RADIAL &AMP; AXIAL FEED RATES OF 0-4 MM / SEC. TAILSTOCK SPINDLE STROKE 30 MM (60 MM) TAILSTOCK MOVED 61 MM WEIGHT 800 KG ACCESSORIES: COOLANT SYSTEM, VARIOUS RECORDINGS, FEEDER RAIL.
Vendedor: Schraag Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-sheet width: 2100 mm<br/>plate thickness: 6 mm<br/>pre-bending: 5 mm<br/>upper roll diameter: 170 mm<br/>min. bending diameter: 255 mm<br/>total power requirement: 4 kw<br/>weight of the machine ca.: 2300 kg<br/>dimensions of the machine ca.: 3800x1130x1100 mm<br/>accessories / equipment:<br/>- conical bending device<br/>- induction hardened rolls<br/>- digital display for side rollers<br/>- machine made of steel construction<br/>- separate control panel<br/>- two speeds<br/>- all rollers on ball bearings<br/>- folding and support bearing from the top roller is actuated from the control panel.<br/>when the folding bearing is opened, the roller moves automatically upwards.<br/>- conical adjustment of the rollers via control panel<br/>- central rollers are via hydraulic motor and rotary reduction gear<br/>driven. (top and bottom rollers)<br/>- calibration<br/><br/><br/><br/><br/> SHEET WIDTH: 2100 MM
PLATE THICKNESS: 6 MM
PRE-BENDING: 5 MM
UPPER ROLL DIAMETER: 170 MM
MIN. BENDING DIAMETER: 255 MM
TOTAL POWER REQUIREMENT: 4 KW
WEIGHT OF THE MACHINE CA.: 2300 KG
DIMENSIONS OF THE MACHINE CA.: 3800X1130X1100 MM
ACCESSORIES / EQUIPMENT:
- CONICAL BENDING DEVICE
- INDUCTION HARDENED ROLLS
- DIGITAL DISPLAY FOR SIDE ROLLERS
- MACHINE MADE OF STEEL CONSTRUCTION
- SEPARATE CONTROL PANEL
- TWO SPEEDS
- ALL ROLLERS ON BALL BEARINGS
- FOLDING AND SUPPORT BEARING FROM THE TOP ROLLER IS ACTUATED FROM THE CONTROL PANEL.
WHEN THE FOLDING BEARING IS OPENED, THE ROLLER MOVES AUTOMATICALLY UPWARDS.
- CONICAL ADJUSTMENT OF THE ROLLERS VIA CONTROL PANEL
- CENTRAL ROLLERS ARE VIA HYDRAULIC MOTOR AND ROTARY REDUCTION GEAR
DRIVEN. (TOP AND BOTTOM ROLLERS)
- CALIBRATION




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2006
hours of operation machine: 25.436 h (06.03.2019)
pressing force approx.: 850 kn
bending length approx.: 2210 mm
control: tasc 6000
working height approx.: 1050 mm
free stand round about: 1750 mm
usable height approx.: 615 mm
space requirements: 2840 x 3100 x 1740 mm
approximate weight machine: 7,800 kg
total connected load approx.: 17 kva

hours of operation a machine: 25.436 h (06.03.2019)
a hydraulic: 17.535 h (06.03.2019)
run-time compression beams: 2593 h (06.03.2019)

standard equipment
-stable machine frame in all-steel construction
-pressure bar with high flexural strength
-electro-hydraulic top drive proportional valves - modern block hydraulic - cnc back gauge with gear rack / bevel drive, for x - and r axes, risk free move the stop fingers from the front - top tool clamping hydraulically
substation stuff for ev matrices, hydraulic clamping, programmable shift (2 positions) - safety device, roll protection covers rear - enclosure air conditioning control
-tasc 6000
-network capability

advanced machine equipment
-increase height/stroke
-additional stop fingers 2-axis
-crowning cnc
-safety device bendguard
-acb preparation
-edition console
-tasc 6000 characters module topscad

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTRUCTION: 2006 HOURS OF OPERATION MACHINE: 25.436 H (06.03.2019) PRESSING FORCE APPROX.: 850 KN BENDING LENGTH APPROX.: 2210 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1050 MM FREE STAND ROUND ABOUT: 1750 MM USABLE HEIGHT APPROX.: 615 MM SPACE REQUIREMENTS: 2840 X 3100 X 1740 MM APPROXIMATE WEIGHT MACHINE: 7,800 KG TOTAL CONNECTED LOAD APPROX.: 17 KVA HOURS OF OPERATION A MACHINE: 25.436 H (06.03.2019) A HYDRAULIC: 17.535 H (06.03.2019) RUN-TIME COMPRESSION BEAMS: 2593 H (06.03.2019) STANDARD EQUIPMENT -STABLE MACHINE FRAME IN ALL-STEEL CONSTRUCTION -PRESSURE BAR WITH HIGH FLEXURAL STRENGTH -ELECTRO-HYDRAULIC TOP DRIVE PROPORTIONAL VALVES - MODERN BLOCK HYDRAULIC - CNC BACK GAUGE WITH GEAR RACK / BEVEL DRIVE, FOR X - AND R AXES, RISK FREE MOVE THE STOP FINGERS FROM THE FRONT - TOP TOOL CLAMPING HYDRAULICALLY SUBSTATION STUFF FOR EV MATRICES, HYDRAULIC CLAMPING, PROGRAMMABLE SHIFT (2 POSITIONS) - SAFETY DEVICE, ROLL PROTECTION COVERS REAR - ENCLOSURE AIR CONDITIONING CONTROL -TASC 6000 -NETWORK CAPABILITY ADVANCED MACHINE EQUIPMENT -INCREASE HEIGHT/STROKE -ADDITIONAL STOP FINGERS 2-AXIS -CROWNING CNC -SAFETY DEVICE BENDGUARD -ACB PREPARATION -EDITION CONSOLE -TASC 6000 CHARACTERS MODULE TOPSCAD TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 450 kg<br/>dimensions (l x w x h) approx.: 850 x 700 x 1800 mm<br/>description: machine number: 2816000<br> drilling capacity in steel (diameter) 16 mm<br> throat depth 250 mm<br> drill stroke 100 mm<br> spindle holder mk 2<br> table: 360 x 290 mm<br> speed 430 - 4500 rpm<br> rack and pinion gear defective WEIGHT APPROX.: 450 KG
DIMENSIONS (L X W X H) APPROX.: 850 X 700 X 1800 MM
DESCRIPTION: MACHINE NUMBER: 2816000
DRILLING CAPACITY IN STEEL (DIAMETER) 16 MM
THROAT DEPTH 250 MM
DRILL STROKE 100 MM
SPINDLE HOLDER MK 2
TABLE: 360 X 290 MM
SPEED 430 - 4500 RPM
RACK AND PINION GEAR DEFECTIVE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ammonia liquid chiller gea grasso vp 1300
 
capacity control
all screw compressors used in the package series are
fitted with a continuous capacity control with a range
of 10 - 100%.
the capacity is adjusted by shortening the compressor
stroke. the defining factor for the compression
process is the effective rotor length; this is altered by
a hydraulically operated control slide (mounted below
the rotors).
as a standard, each grasso liquid chiller fx pp, lp, vp comprises a low-voltage switchgear installation (ip54) with
integral freely programmable logic controller (plc) gsc. the software functions and the assignment of
inputs/outputs of the gsc control are described separately.
the standard scope of delivery for the low-voltage switchgear installation for liquid
chillers fx comprises:
 
• main switch (load break cut-out)
• star/delta combination for drive motor
• motor fuse
• motor current transformer
• motor winding protector
• plc hardware
• oil pump contactor
• control transformer with double control fuse on primary and
secondary side
• 24 v dc current supply
• emergency off button
• signal lamp - compressor running
• signal lamp — fault
• signal lamp - warning   AMMONIA LIQUID CHILLER GEA GRASSO VP 1300 CAPACITY CONTROL ALL SCREW COMPRESSORS USED IN THE PACKAGE SERIES ARE FITTED WITH A CONTINUOUS CAPACITY CONTROL WITH A RANGE OF 10 - 100%. THE CAPACITY IS ADJUSTED BY SHORTENING THE COMPRESSOR STROKE. THE DEFINING FACTOR FOR THE COMPRESSION PROCESS IS THE EFFECTIVE ROTOR LENGTH; THIS IS ALTERED BY A HYDRAULICALLY OPERATED CONTROL SLIDE (MOUNTED BELOW THE ROTORS). AS A STANDARD, EACH GRASSO LIQUID CHILLER FX PP, LP, VP COMPRISES A LOW-VOLTAGE SWITCHGEAR INSTALLATION (IP54) WITH INTEGRAL FREELY PROGRAMMABLE LOGIC CONTROLLER (PLC) GSC. THE SOFTWARE FUNCTIONS AND THE ASSIGNMENT OF INPUTS/OUTPUTS OF THE GSC CONTROL ARE DESCRIBED SEPARATELY. THE STANDARD SCOPE OF DELIVERY FOR THE LOW-VOLTAGE SWITCHGEAR INSTALLATION FOR LIQUID CHILLERS FX COMPRISES: • MAIN SWITCH (LOAD BREAK CUT-OUT) • STAR/DELTA COMBINATION FOR DRIVE MOTOR • MOTOR FUSE • MOTOR CURRENT TRANSFORMER • MOTOR WINDING PROTECTOR • PLC HARDWARE • OIL PUMP CONTACTOR • CONTROL TRANSFORMER WITH DOUBLE CONTROL FUSE ON PRIMARY AND SECONDARY SIDE • 24 V DC CURRENT SUPPLY • EMERGENCY OFF BUTTON • SIGNAL LAMP - COMPRESSOR RUNNING • SIGNAL LAMP — FAULT • SIGNAL LAMP - WARNING
Vendedor: JADE Trading OY
Año de construcción: usado
Precio: used machinery auction RESALE 1.600 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 6000 x 2500 x 1800 mm<br/>description: 77kw/105 ps,gebnz,divided back seat, klimatronic, lra, mal,multiflkrd,navi,neb, rcd, rain sensor,railing, particulate filter, cheuquebook, sport seats,sv, speed, zv, 4efh, 5 gear, ab front, ab side front, abs, ahk, alu, bc, col,esp,espgl.hzg WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 6000 X 2500 X 1800 MM
DESCRIPTION: 77KW/105 PS,GEBNZ,DIVIDED BACK SEAT, KLIMATRONIC, LRA, MAL,MULTIFLKRD,NAVI,NEB, RCD, RAIN SENSOR,RAILING, PARTICULATE FILTER, CHEUQUEBOOK, SPORT SEATS,SV, SPEED, ZV, 4EFH, 5 GEAR, AB FRONT, AB SIDE FRONT, ABS, AHK, ALU, BC, COL,ESP,ESPGL.HZG
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-glass bottle filling line krones one way 54.000 bph
 
complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. it was delivered by krones in year 2000 and it was in operation till 2015 and is currently installed and powered. equipment is very well maintaned and it has a complete techncial documentation in english.
 
main characteristics
- capacity 54 000 bph at 0.33 liter bottles
- made by krones in year 2000, in operation till 2015 still installed
- bottle volumes 275, 330 ml and earlier also 660 ml bottles
- total operating hours approx 70.000
- one way line for new glass bottles
- secondary packaging kisters wraparound packer and khs innopac wsp a-m combi packer
- operation controls made with siemens simatic s7 plc system
- overall line efficiency 75 %

list of main equipment:

1. empty bottle pallet transport conveyor system, kensal, year 2010
2. empty bottle depalletiser, kettner pressant universal
- capacity 100 pallets / hour
- layer interleave removal device
- empty pallet stacking device, type 454, model lpmt with max 15 pallet magazine
- empty pallet transport conveyor system
3. empty bottle transport conveyors (mass flow), krones
4. empty bottle transport conveyors/reject lane (single file), krones
5. zero pressure single filer, krones
6. empty bottle inspector krones linatronic
7. filler monobloc (rinser-filler-capper) krones mecafill vk(2v)cf
- short tube filling system for beer and soft drinks with double pre-evacuation before filling
- 132 filling valves, two maxicrown (year 2007) 26 capping stations, one for crown and one for twist off caps
- maxicrown cap feeding system
- inbuilt monoblock cip system
- valve block with buffer tank
- change parts for all bottles sizes
8. full bottle transport conveyor system (filler - pasteuriser), krones
9. full bottle inspector krones checkmat type 707 with swing-push rejection
10. tunnel pasteuriser, sander hansen pb 17.9-504-42, machine number 622
- it has 7 zones total, 4 pasteurization and 3 regerative zones
- total process area 240 m2
- the pasteurizer was refurbished one year ago and it has new martahoon plastic betls and new gear drives.
11. full bottle transport conveyor system (pasteuriser - labellers), krones
12. two bottle driers (air knives)
13. two labelers krones solomatic 018-g88
- combined output between 54.000 bph
- cold glue system, both with two label stations for ready cut paper labels
- rotation l-r and r-l (oposite directions)
- inbuilt no-label checking and rejecting system
- bottle handling change parts and storage racks for parts
14. bottle marking system with
- two videojet inc date coders, model xl 170i uhs af (one for each labeler)
- two domino lazer marker, model dpx1500 digital (one for each labeler)
- two domino digital coder 3, model ddc3l, year 2010 (one for each labeler)
15. two label inspectors, krones checkmat type 707 (one for each line)
16. full bottle transport conveyor system (labelers - kisters) incl. labeler reject conveyor
17. wraparound packer khs kisters innopac wp 070v, year 2005, 70 cycle per min, various configurations with automatic carton feeding system
18. full bottle transport conveyor system (feeding loose bottles to kister combi)
19. khs combi packer, type innopac wsp a-m, year 2011, machine number k-89403431- 000100, max 58 cycles/min, with automatic carton feeding system
20. two finished pack coders, type videojet
21. two lock & pop device made by nordson, in year 2010
22. finished pack transport conveyors
23. finished pack transport spiral elevator made by ambaflex in 2000
24. related electrical control and mcc panels   GLASS BOTTLE FILLING LINE KRONES ONE WAY 54.000 BPH COMPLETE LINE FOR BOTTLING BEER, CARBONATED AND NON CARBONATED SOFT DRINKS IN ONE WAY GLASS BOTTLES AT NOMINAL CAPACITY OF 54 000 BPH. IT WAS DELIVERED BY KRONES IN YEAR 2000 AND IT WAS IN OPERATION TILL 2015 AND IS CURRENTLY INSTALLED AND POWERED. EQUIPMENT IS VERY WELL MAINTANED AND IT HAS A COMPLETE TECHNCIAL DOCUMENTATION IN ENGLISH. MAIN CHARACTERISTICS - CAPACITY 54 000 BPH AT 0.33 LITER BOTTLES - MADE BY KRONES IN YEAR 2000, IN OPERATION TILL 2015 STILL INSTALLED - BOTTLE VOLUMES 275, 330 ML AND EARLIER ALSO 660 ML BOTTLES - TOTAL OPERATING HOURS APPROX 70.000 - ONE WAY LINE FOR NEW GLASS BOTTLES - SECONDARY PACKAGING KISTERS WRAPAROUND PACKER AND KHS INNOPAC WSP A-M COMBI PACKER - OPERATION CONTROLS MADE WITH SIEMENS SIMATIC S7 PLC SYSTEM - OVERALL LINE EFFICIENCY 75 % LIST OF MAIN EQUIPMENT: 1. EMPTY BOTTLE PALLET TRANSPORT CONVEYOR SYSTEM, KENSAL, YEAR 2010 2. EMPTY BOTTLE DEPALLETISER, KETTNER PRESSANT UNIVERSAL - CAPACITY 100 PALLETS / HOUR - LAYER INTERLEAVE REMOVAL DEVICE - EMPTY PALLET STACKING DEVICE, TYPE 454, MODEL LPMT WITH MAX 15 PALLET MAGAZINE - EMPTY PALLET TRANSPORT CONVEYOR SYSTEM 3. EMPTY BOTTLE TRANSPORT CONVEYORS (MASS FLOW), KRONES 4. EMPTY BOTTLE TRANSPORT CONVEYORS/REJECT LANE (SINGLE FILE), KRONES 5. ZERO PRESSURE SINGLE FILER, KRONES 6. EMPTY BOTTLE INSPECTOR KRONES LINATRONIC 7. FILLER MONOBLOC (RINSER-FILLER-CAPPER) KRONES MECAFILL VK(2V)CF - SHORT TUBE FILLING SYSTEM FOR BEER AND SOFT DRINKS WITH DOUBLE PRE-EVACUATION BEFORE FILLING - 132 FILLING VALVES, TWO MAXICROWN (YEAR 2007) 26 CAPPING STATIONS, ONE FOR CROWN AND ONE FOR TWIST OFF CAPS - MAXICROWN CAP FEEDING SYSTEM - INBUILT MONOBLOCK CIP SYSTEM - VALVE BLOCK WITH BUFFER TANK - CHANGE PARTS FOR ALL BOTTLES SIZES 8. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FILLER - PASTEURISER), KRONES 9. FULL BOTTLE INSPECTOR KRONES CHECKMAT TYPE 707 WITH SWING-PUSH REJECTION 10. TUNNEL PASTEURISER, SANDER HANSEN PB 17.9-504-42, MACHINE NUMBER 622 - IT HAS 7 ZONES TOTAL, 4 PASTEURIZATION AND 3 REGERATIVE ZONES - TOTAL PROCESS AREA 240 M2 - THE PASTEURIZER WAS REFURBISHED ONE YEAR AGO AND IT HAS NEW MARTAHOON PLASTIC BETLS AND NEW GEAR DRIVES. 11. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (PASTEURISER - LABELLERS), KRONES 12. TWO BOTTLE DRIERS (AIR KNIVES) 13. TWO LABELERS KRONES SOLOMATIC 018-G88 - COMBINED OUTPUT BETWEEN 54.000 BPH - COLD GLUE SYSTEM, BOTH WITH TWO LABEL STATIONS FOR READY CUT PAPER LABELS - ROTATION L-R AND R-L (OPOSITE DIRECTIONS) - INBUILT NO-LABEL CHECKING AND REJECTING SYSTEM - BOTTLE HANDLING CHANGE PARTS AND STORAGE RACKS FOR PARTS 14. BOTTLE MARKING SYSTEM WITH - TWO VIDEOJET INC DATE CODERS, MODEL XL 170I UHS AF (ONE FOR EACH LABELER) - TWO DOMINO LAZER MARKER, MODEL DPX1500 DIGITAL (ONE FOR EACH LABELER) - TWO DOMINO DIGITAL CODER 3, MODEL DDC3L, YEAR 2010 (ONE FOR EACH LABELER) 15. TWO LABEL INSPECTORS, KRONES CHECKMAT TYPE 707 (ONE FOR EACH LINE) 16. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (LABELERS - KISTERS) INCL. LABELER REJECT CONVEYOR 17. WRAPAROUND PACKER KHS KISTERS INNOPAC WP 070V, YEAR 2005, 70 CYCLE PER MIN, VARIOUS CONFIGURATIONS WITH AUTOMATIC CARTON FEEDING SYSTEM 18. FULL BOTTLE TRANSPORT CONVEYOR SYSTEM (FEEDING LOOSE BOTTLES TO KISTER COMBI) 19. KHS COMBI PACKER, TYPE INNOPAC WSP A-M, YEAR 2011, MACHINE NUMBER K-89403431- 000100, MAX 58 CYCLES/MIN, WITH AUTOMATIC CARTON FEEDING SYSTEM 20. TWO FINISHED PACK CODERS, TYPE VIDEOJET 21. TWO LOCK & POP DEVICE MADE BY NORDSON, IN YEAR 2010 22. FINISHED PACK TRANSPORT CONVEYORS 23. FINISHED PACK TRANSPORT SPIRAL ELEVATOR MADE BY AMBAFLEX IN 2000 24. RELATED ELECTRICAL CONTROL AND MCC PANELS
Vendedor: JADE Trading OY
Año de construcción: usado
Ubicación: Land-max. wheel diameter:600 mm<br/>max. module:10 <br/>min. module:2 <br/>total power requirement:1,4 kw<br/>weight of the machine ca.:0,68 t<br/>dimensions of the machine ca.:1,6x0,75 m<br/>diameter of hob:15 mm<br/>gear width:140 mm<br/><br/> MAX. WHEEL DIAMETER:600 MM
MAX. MODULE:10
MIN. MODULE:2
TOTAL POWER REQUIREMENT:1,4 KW
WEIGHT OF THE MACHINE CA.:0,68 T
DIMENSIONS OF THE MACHINE CA.:1,6X0,75 M
DIAMETER OF HOB:15 MM
GEAR WIDTH:140 MM

Vendedor: HD Werkzeugmaschinenhandel GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)