537 ofertas

Año de construcción: usado
Ubicación: Land-technical data:

-mot 3. driven roller - hydr. delivery of the two bottom rollers + the two setup roles / lead role
-the machine is 240 n / mmâ² strength of the material / yield point horizontally or vertically can be used-
/ re max torque 25
-bending performance: - flat stock - upright 80 x 20 mm ã? 800 mm - flat 140 x 30 mm ã? 700 mm
-hea 120 ã? 1000 mm
-tubular 88.9 x 3, 2 ã? 1000 mm
-bending speed 0-5 m / min
-roll diameter 290 mm
-shaft diameter 90 mm
-drive 400 v / 9,2 kw
-with:-analogue actual value indicators
-standart bending set for flat and angle material - div. tube roller sets 28; 48.3; 
	-weight approx.						2000 kg
	-space requirement approx.		            b h 1600 x 1300 x 1400 mm    
 TECHNICAL DATA: -MOT 3. DRIVEN ROLLER - HYDR. DELIVERY OF THE TWO BOTTOM ROLLERS + THE TWO SETUP ROLES / LEAD ROLE -THE MACHINE IS 240 N / MM² STRENGTH OF THE MATERIAL / YIELD POINT HORIZONTALLY OR VERTICALLY CAN BE USED- / RE MAX TORQUE 25 -BENDING PERFORMANCE: - FLAT STOCK - UPRIGHT 80 X 20 MM � 800 MM - FLAT 140 X 30 MM � 700 MM -HEA 120 � 1000 MM -TUBULAR 88.9 X 3, 2 � 1000 MM -BENDING SPEED 0-5 M / MIN -ROLL DIAMETER 290 MM -SHAFT DIAMETER 90 MM -DRIVE 400 V / 9,2 KW -WITH:-ANALOGUE ACTUAL VALUE INDICATORS -STANDART BENDING SET FOR FLAT AND ANGLE MATERIAL - DIV. TUBE ROLLER SETS 28; 48.3; -WEIGHT APPROX. 2000 KG -SPACE REQUIREMENT APPROX. B H 1600 X 1300 X 1400 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-technical data:

-bandsaw half machine with microprocessor control and manual function
-band saw blade size 4500 x 34.0 x 1.1 mm
-infinitely variable n 15 to 100 m/min cutting speed
-hydr. material clamping stock
-maximum clamping possibility 455 mm - mitre adjustable left to 60 â° right up to 45 â° - cutting capacity at 90 â° round 330 mm
	-square 320 mm
	-flat 450 x 320 mm
	-cutting capacity at 45 â° li + re around 320 mm
	-45 â° li + re flat 300 x 300 mm
	-60 â° li + re flat 200 x 200 mm
-drive 400 v / 4 kw
-coolant system - spã¤nerã¤umbã¼rste - original removal roller 3000 mm
-weight approx.					  	1200 kg - space requirement approx.	                 b h 1800 x 1950 x h 2000 mm
 TECHNICAL DATA: -BANDSAW HALF MACHINE WITH MICROPROCESSOR CONTROL AND MANUAL FUNCTION -BAND SAW BLADE SIZE 4500 X 34.0 X 1.1 MM -INFINITELY VARIABLE N 15 TO 100 M/MIN CUTTING SPEED -HYDR. MATERIAL CLAMPING STOCK -MAXIMUM CLAMPING POSSIBILITY 455 MM - MITRE ADJUSTABLE LEFT TO 60 ° RIGHT UP TO 45 ° - CUTTING CAPACITY AT 90 ° ROUND 330 MM -SQUARE 320 MM -FLAT 450 X 320 MM -CUTTING CAPACITY AT 45 ° LI + RE AROUND 320 MM -45 ° LI + RE FLAT 300 X 300 MM -60 ° LI + RE FLAT 200 X 200 MM -DRIVE 400 V / 4 KW -COOLANT SYSTEM - SPäNERäUMBüRSTE - ORIGINAL REMOVAL ROLLER 3000 MM -WEIGHT APPROX. 1200 KG - SPACE REQUIREMENT APPROX. B H 1800 X 1950 X H 2000 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-tube bending machines; numerically controlled; max aluminum tube diameter 20 mm â?? control fabr. siemens; type simatic hmi; gittereumhausung with safety light barrier TUBE BENDING MACHINES; NUMERICALLY CONTROLLED; MAX ALUMINUM TUBE DIAMETER 20 MM Â?? CONTROL FABR. SIEMENS; TYPE SIMATIC HMI; GITTEREUMHAUSUNG WITH SAFETY LIGHT BARRIER
Vendedor: Troostwijk Auctions
Año de construcción: usado
Ubicación: Land-weight approx.: 1200 kg<br/>dimensions (l x w x h) approx.: 1850 x 800 x 1500 mm<br/>description: turning diameter over bed: 370 mm turning diameter over slide rest: 230 mm turning length: 700 mm speeds: 25-2000 u/min centre height: 185 mm spindle bore: 40 mm tailstock quill taper mt: 3 total power: 3,2 kw WEIGHT APPROX.: 1200 KG
DIMENSIONS (L X W X H) APPROX.: 1850 X 800 X 1500 MM
DESCRIPTION: TURNING DIAMETER OVER BED: 370 MM TURNING DIAMETER OVER SLIDE REST: 230 MM TURNING LENGTH: 700 MM SPEEDS: 25-2000 U/MIN CENTRE HEIGHT: 185 MM SPINDLE BORE: 40 MM TAILSTOCK QUILL TAPER MT: 3 TOTAL POWER: 3,2 KW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-forte
machine name : bandsaw machine
manufacturer : forte
location : mumbai
year of manufacturing :
technical specification: 
make: forte capacity: 500mm capacity 90 approximately 420 mm flat 500 x 250 mm 
flat mitered at 45 300 mm 300 x 380 mm max. opening width of vise mm - saw-band 4870 x 25 x 0.9 mm
4 cutting speeds 20 - 30 - 40 - 60 m / min  FORTE MACHINE NAME : BANDSAW MACHINE MANUFACTURER : FORTE LOCATION : MUMBAI YEAR OF MANUFACTURING : TECHNICAL SPECIFICATION: MAKE: FORTE CAPACITY: 500MM CAPACITY 90 APPROXIMATELY 420 MM FLAT 500 X 250 MM FLAT MITERED AT 45 300 MM 300 X 380 MM MAX. OPENING WIDTH OF VISE MM - SAW-BAND 4870 X 25 X 0.9 MM 4 CUTTING SPEEDS 20 - 30 - 40 - 60 M / MIN
Vendedor: Syndicate Machines Pvt. Ltd.
Año de construcción: usado
Ubicación: Land-: 6.400 mm<br/>: 1.000 mm<br/>fully automatic bending in two ways without the need to rotate the sheet<br/>hydraulic drive<br/>bms multi-touch with automatic depth stop<br/>powered rotary shear<br/>additional rail on the bending beam<br/>material support<br/>2x foot pedal<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/><br/>   preserving material support made out of synthetics price on request   hydraulic radius adjustment (air gap adjustment)<br/>the bending capacitiy of aluminium rises up to 2,5mm price on request   extended depth 20 - 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   fully automatic gripper system with 4 gripper units price on request   <br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/><br/><br/><br/>bending length: 6.400 mm<br/>bending capacity: steel 400 n/mm² = 1,25 mm, alu 190 n/mm² = 2,00 mm<br/>shearing capacity motorized shear: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 4<br/>no. of driven linkage assemblies: 4<br/>max. depth: 1.000 mm<br/><br/><br/><br/> : 6.400 MM
: 1.000 MM
FULLY AUTOMATIC BENDING IN TWO WAYS WITHOUT THE NEED TO ROTATE THE SHEET
HYDRAULIC DRIVE
BMS MULTI-TOUCH WITH AUTOMATIC DEPTH STOP
POWERED ROTARY SHEAR
ADDITIONAL RAIL ON THE BENDING BEAM
MATERIAL SUPPORT
2X FOOT PEDAL
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


PRESERVING MATERIAL SUPPORT MADE OUT OF SYNTHETICS PRICE ON REQUEST HYDRAULIC RADIUS ADJUSTMENT (AIR GAP ADJUSTMENT)
THE BENDING CAPACITIY OF ALUMINIUM RISES UP TO 2,5MM PRICE ON REQUEST EXTENDED DEPTH 20 - 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST FULLY AUTOMATIC GRIPPER SYSTEM WITH 4 GRIPPER UNITS PRICE ON REQUEST

PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)







BENDING LENGTH: 6.400 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,25 MM, ALU 190 N/MM² = 2,00 MM
SHEARING CAPACITY MOTORIZED SHEAR: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 4
NO. OF DRIVEN LINKAGE ASSEMBLIES: 4
MAX. DEPTH: 1.000 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-miter bandsaw behringer

hbp 263 g-type

year of manufacture 2004

cutting diameter: 260 mm

blade length: 4640 mm

cutting width: 400 x 260 mm

material height: 800 mm

band saw blade dimensions: 4640 x 34 x 1,1 mm

miter cuts / + degree :-30 + 60 â° c

cutting speed: 20-140 m / min

power: 4,0 kw

microschmiereinrichtung

machine weight approx.: 1.5 t

mechanical length stop with roller conveyor 4 m

feed roller 6 m
the offer is aimed exclusively at professionals in the sense of ⧠14bgb
no sales to private! MITER BANDSAW BEHRINGER HBP 263 G-TYPE YEAR OF MANUFACTURE 2004 CUTTING DIAMETER: 260 MM BLADE LENGTH: 4640 MM CUTTING WIDTH: 400 X 260 MM MATERIAL HEIGHT: 800 MM BAND SAW BLADE DIMENSIONS: 4640 X 34 X 1,1 MM MITER CUTS / + DEGREE :-30 + 60 &ACIRC;&DEG; C CUTTING SPEED: 20-140 M / MIN POWER: 4,0 KW MICROSCHMIEREINRICHTUNG MACHINE WEIGHT APPROX.: 1.5 T MECHANICAL LENGTH STOP WITH ROLLER CONVEYOR 4 M FEED ROLLER 6 M THE OFFER IS AIMED EXCLUSIVELY AT PROFESSIONALS IN THE SENSE OF &ACIRC;&SECT; 14BGB NO SALES TO PRIVATE!
Vendedor: Jens Kürschner Maschinenhandel
Año de construcción: usado
Ubicación: Land-: 6.400 mm<br/>: 1.000 mm<br/>fully automatic bending in two ways without the need to rotate the sheet<br/>hydraulic drive<br/>bms multi-touch with automatic depth stop<br/>powered rotary shear<br/>additional rail on the bending beam<br/>material support<br/>2x foot pedal<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/><br/>   preserving material support made out of synthetics price on request   hydraulic radius adjustment (air gap adjustment)<br/>the bending capacitiy of aluminium rises up to 2,5mm price on request   extended depth 20 - 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   fully automatic gripper system with 4 gripper units price on request   <br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/><br/><br/><br/>bending length: 6.400 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>shearing capacity motorized shear: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 5<br/>no. of driven linkage assemblies: 5<br/>max. depth: 1.000 mm<br/><br/><br/><br/> : 6.400 MM
: 1.000 MM
FULLY AUTOMATIC BENDING IN TWO WAYS WITHOUT THE NEED TO ROTATE THE SHEET
HYDRAULIC DRIVE
BMS MULTI-TOUCH WITH AUTOMATIC DEPTH STOP
POWERED ROTARY SHEAR
ADDITIONAL RAIL ON THE BENDING BEAM
MATERIAL SUPPORT
2X FOOT PEDAL
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


PRESERVING MATERIAL SUPPORT MADE OUT OF SYNTHETICS PRICE ON REQUEST HYDRAULIC RADIUS ADJUSTMENT (AIR GAP ADJUSTMENT)
THE BENDING CAPACITIY OF ALUMINIUM RISES UP TO 2,5MM PRICE ON REQUEST EXTENDED DEPTH 20 - 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST FULLY AUTOMATIC GRIPPER SYSTEM WITH 4 GRIPPER UNITS PRICE ON REQUEST

PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)







BENDING LENGTH: 6.400 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
SHEARING CAPACITY MOTORIZED SHEAR: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 5
NO. OF DRIVEN LINKAGE ASSEMBLIES: 5
MAX. DEPTH: 1.000 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-ostas round bending machine

type sbm 1070 x 95

-capaciteit 1070 x 3 mm
-walsen conisch
-bovenrol wegdraaibare
-voetbediening
-noodstop
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS ROUND BENDING MACHINE TYPE SBM 1070 X 95 -CAPACITEIT 1070 X 3 MM -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -VOETBEDIENING -NOODSTOP -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>electrocinematic drive of the bending joints<br/>millmeter precise adjustment of the clamping beam<br/>bms multi-touch control<br/>electric powered rotary shear<br/>electronic depth stop<br/>flexible material supports<br/>inclined bending beam<br/>optimized geometry of the clamping beam<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/><br/>   extended depth 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   clamping beam made out of hardox price on request   <br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 4<br/><br/><br/><br/> : 4.010 MM
ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS
MILLMETER PRECISE ADJUSTMENT OF THE CLAMPING BEAM
BMS MULTI-TOUCH CONTROL
ELECTRIC POWERED ROTARY SHEAR
ELECTRONIC DEPTH STOP
FLEXIBLE MATERIAL SUPPORTS
INCLINED BENDING BEAM
OPTIMIZED GEOMETRY OF THE CLAMPING BEAM
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


EXTENDED DEPTH 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST CLAMPING BEAM MADE OUT OF HARDOX PRICE ON REQUEST


PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)




BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 4



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.080 €
Ubicación: Land-jaespa

w260

metal band saw

technical data:

jaespa w260

power 1 .1kw

stepless cutting speed

bevel cuts up to 45 â°

coolant system

slewing ring

weight approx. 400kg

a vat invoice is created for you.

JAESPA W260 METAL BAND SAW TECHNICAL DATA: JAESPA W260 POWER 1 .1KW STEPLESS CUTTING SPEED BEVEL CUTS UP TO 45 &ACIRC;&DEG; COOLANT SYSTEM SLEWING RING WEIGHT APPROX. 400KG A VAT INVOICE IS CREATED FOR YOU.
Vendedor: Fa. Schönknecht
Año de construcción: usado
Ubicación: Land-: 6.400 mm<br/>electrocinematic drive of the bending joints<br/>millmeter precise adjustment of the clamping beam<br/>bms multi-touch control<br/>electric powered rotary shear<br/>electronic depth stop<br/>flexible material supports<br/>inclined bending beam<br/>optimized geometry of the clamping beam<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/> <br/>   extended depth 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   clamping beam made out of hardox price on request   <br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/>bending length: 6.400 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 6<br/><br/><br/><br/> : 6.400 MM
ELECTROCINEMATIC DRIVE OF THE BENDING JOINTS
MILLMETER PRECISE ADJUSTMENT OF THE CLAMPING BEAM
BMS MULTI-TOUCH CONTROL
ELECTRIC POWERED ROTARY SHEAR
ELECTRONIC DEPTH STOP
FLEXIBLE MATERIAL SUPPORTS
INCLINED BENDING BEAM
OPTIMIZED GEOMETRY OF THE CLAMPING BEAM
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


EXTENDED DEPTH 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST CLAMPING BEAM MADE OUT OF HARDOX PRICE ON REQUEST


PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)




BENDING LENGTH: 6.400 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 6



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-ayel-tech round bending machine

type rm 1270 x 90

-capaciteit 1270 x 2.5 mm
-walsen conisch
-bovenrol wegdraaibare
-remmotor
-voetbediening
-noodstop
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) AYEL-TECH ROUND BENDING MACHINE TYPE RM 1270 X 90 -CAPACITEIT 1270 X 2.5 MM -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -REMMOTOR -VOETBEDIENING -NOODSTOP -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-: 6 h<br/>: 6 h<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 3,0 kw<br/>: 4.550 mm<br/>: 5.200 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 2.900 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   powered rotary shear with cutting head s2 st/al 2,00/2,50 mm price on request   powered rotary shear with cutting head s3 st/al 3,00/4,00 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 3 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/><br/>   graphic touch control with powered back gauge taz 1000 with 3 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/><br/><br/>clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending capacity: steel 400 n/mm² = 3,00 mm, alu 190 n/mm² = 4,00 mm<br/>no. of stand and tension arm units: 6h<br/>no. of driven linkage assemblies: 6h<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 3,0 kw<br/>length with hand shear: 4.550 mm<br/>length with motorized shear: 5.200 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 2.900 kg<br/><br/><br/><br/> : 6 H
: 6 H
: 1.130 MM
: 180 MM
: 915 MM
: 3,0 KW
: 4.550 MM
: 5.200 MM
: 1.435 MM
: 1.460 MM
: 2.900 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD S2 ST/AL 2,00/2,50 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD S3 ST/AL 3,00/4,00 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH

GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST


CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST







PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING CAPACITY: STEEL 400 N/MM² = 3,00 MM, ALU 190 N/MM² = 4,00 MM
NO. OF STAND AND TENSION ARM UNITS: 6H
NO. OF DRIVEN LINKAGE ASSEMBLIES: 6H
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 3,0 KW
LENGTH WITH HAND SHEAR: 4.550 MM
LENGTH WITH MOTORIZED SHEAR: 5.200 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 2.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-cap. max. 300 kn, machine weight 800 kg, stroke 300 mm
de:
horizontal-richt- und biegemaschine, fabr. stierli bieger, typ 300 he/ce, bj. 2009, ser.-nr. a655, arbeitsdruck max. 300 kn, maschinengewicht 800 kg, hublänge 300 m
 CAP. MAX. 300 KN, MACHINE WEIGHT 800 KG, STROKE 300 MM DE: HORIZONTAL-RICHT- UND BIEGEMASCHINE, FABR. STIERLI BIEGER, TYP 300 HE/CE, BJ. 2009, SER.-NR. A655, ARBEITSDRUCK MAX. 300 KN, MASCHINENGEWICHT 800 KG, HUBLäNGE 300 M
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-: 1,25 mm<br/>: 8.020 mm<br/>: 190 mm<br/>: 3,0 kw<br/>: 9.200 mm<br/>: 1.300 mm<br/>: 1.300 mm<br/>: 2.800 kg<br/>year of manufacturing 1980 / refurbished 2017<br/><br/>new:<br/>digital bending angle adjustment - control bms 9<br/>electric wiring<br/>electric cabinet<br/>several hydraulic tubes<br/>drive belt<br/>blades of electric shear<br/><br/>refurbished:<br/>rail of bending flange and hold down unit<br/><br/><br/>electric shear<br/>2 foot pedals<br/><br/>complys with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>bending capacity: 1,25 mm<br/>effective length: 8.020 mm<br/>max. opening of upper beam: 190 mm<br/>no. of stands/clamping arms: 7<br/>no. of clamping cylinders: 7<br/>no. of bending cylinders: 7<br/>no. of bending elements: 7<br/>motor-hydraulic: 3,0 kw<br/>length: 9.200 mm<br/>width: 1.300 mm<br/>height: 1.300 mm<br/>weight: 2.800 kg<br/><br/><br/><br/> : 1,25 MM
: 8.020 MM
: 190 MM
: 3,0 KW
: 9.200 MM
: 1.300 MM
: 1.300 MM
: 2.800 KG
YEAR OF MANUFACTURING 1980 / REFURBISHED 2017

NEW:
DIGITAL BENDING ANGLE ADJUSTMENT - CONTROL BMS 9
ELECTRIC WIRING
ELECTRIC CABINET
SEVERAL HYDRAULIC TUBES
DRIVE BELT
BLADES OF ELECTRIC SHEAR

REFURBISHED:
RAIL OF BENDING FLANGE AND HOLD DOWN UNIT


ELECTRIC SHEAR
2 FOOT PEDALS

COMPLYS WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




BENDING CAPACITY: 1,25 MM
EFFECTIVE LENGTH: 8.020 MM
MAX. OPENING OF UPPER BEAM: 190 MM
NO. OF STANDS/CLAMPING ARMS: 7
NO. OF CLAMPING CYLINDERS: 7
NO. OF BENDING CYLINDERS: 7
NO. OF BENDING ELEMENTS: 7
MOTOR-HYDRAULIC: 3,0 KW
LENGTH: 9.200 MM
WIDTH: 1.300 MM
HEIGHT: 1.300 MM
WEIGHT: 2.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-working width max. 2,000 mm
de:
dreiwalzen-rundbiegemaschine, fabr. mg, typ ak 206 p, bj. 2000, ser.-nr. 2095, arbeitsbreite max. 2.000 mm
  WORKING WIDTH MAX. 2,000 MM DE: DREIWALZEN-RUNDBIEGEMASCHINE, FABR. MG, TYP AK 206 P, BJ. 2000, SER.-NR. 2095, ARBEITSBREITE MAX. 2.000 MM
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-: 6.200 mm<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 3 kw<br/>: 6.730 mm<br/>: 7.380 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 3.200 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 4 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/>   graphic touch control with powered back gauge taz 1000 with 4 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/><br/> clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending length: 6.200 mm<br/>bending capacity: steel 400 n/mm² = 1,25 mm, alu 190 n/mm² = 2 mm<br/>no. of stand and tension arm units: 5<br/>no. of driven linkage assemblies: 5<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 3 kw<br/>length with hand shear: 6.730 mm<br/>length with motorized shear: 7.380 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 3.200 kg<br/><br/><br/><br/> : 6.200 MM
: 1.130 MM
: 180 MM
: 915 MM
: 3 KW
: 6.730 MM
: 7.380 MM
: 1.435 MM
: 1.460 MM
: 3.200 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 4 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH
GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 4 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST

 CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST






PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING LENGTH: 6.200 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,25 MM, ALU 190 N/MM² = 2 MM
NO. OF STAND AND TENSION ARM UNITS: 5
NO. OF DRIVEN LINKAGE ASSEMBLIES: 5
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 3 KW
LENGTH WITH HAND SHEAR: 6.730 MM
LENGTH WITH MOTORIZED SHEAR: 7.380 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 3.200 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-usable length 750 mm, sheet thickness max. 2 mm, machine weight 900 kg
de:
zweiwalzen-rundbiegemaschine, fabr. stölting, typ bu-u, bj. 1998, ser.-nr. m179, nutzlänge 750 mm, blechstärke max. 2 mm, maschinengewicht 900
  USABLE LENGTH 750 MM, SHEET THICKNESS MAX. 2 MM, MACHINE WEIGHT 900 KG DE: ZWEIWALZEN-RUNDBIEGEMASCHINE, FABR. STöLTING, TYP BU-U, BJ. 1998, SER.-NR. M179, NUTZLäNGE 750 MM, BLECHSTäRKE MAX. 2 MM, MASCHINENGEWICHT 900
Vendedor: Hilco
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 3,0 kw<br/>: 4.550 mm<br/>: 5.200 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 2.900 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   powered rotary shear with cutting head s2 st/al 2,00/2,50 mm price on request   powered rotary shear with cutting head s3 st/al 3,00/4,00 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 3 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/><br/>   graphic touch control with powered back gauge taz 1000 with 3 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/><br/><br/>clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 2,00 mm, alu 190 n/mm² = 3,00 mm<br/>no. of stand and tension arm units: 7<br/>no. of driven linkage assemblies: 7<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 3,0 kw<br/>length with hand shear: 4.550 mm<br/>length with motorized shear: 5.200 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 2.900 kg<br/><br/><br/><br/> : 4.010 MM
: 1.130 MM
: 180 MM
: 915 MM
: 3,0 KW
: 4.550 MM
: 5.200 MM
: 1.435 MM
: 1.460 MM
: 2.900 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD S2 ST/AL 2,00/2,50 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD S3 ST/AL 3,00/4,00 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH

GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST


CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST







PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 2,00 MM, ALU 190 N/MM² = 3,00 MM
NO. OF STAND AND TENSION ARM UNITS: 7
NO. OF DRIVEN LINKAGE ASSEMBLIES: 7
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 3,0 KW
LENGTH WITH HAND SHEAR: 4.550 MM
LENGTH WITH MOTORIZED SHEAR: 5.200 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 2.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-code: 0566
brand: artiglio
model: agf 400

band saw for beam cutting 

technical data: 
column height  mm 2350
arm lenght mm 1900
swiveling arm   180 °
band saw  height mm 1600
flywheel diameter   mm 400
max width of  wood to cut   mm 380
max cutting height mm 280
three-phase motor  hp 1,8
weight  kg 350


 CODE: 0566 BRAND: ARTIGLIO MODEL: AGF 400 BAND SAW FOR BEAM CUTTING TECHNICAL DATA: COLUMN HEIGHT MM 2350 ARM LENGHT MM 1900 SWIVELING ARM 180 ° BAND SAW HEIGHT MM 1600 FLYWHEEL DIAMETER MM 400 MAX WIDTH OF WOOD TO CUT MM 380 MAX CUTTING HEIGHT MM 280 THREE-PHASE MOTOR HP 1,8 WEIGHT KG 350
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 3,0 kw<br/>: 4.550 mm<br/>: 5.200 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 2.900 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 3 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/><br/>   graphic touch control with powered back gauge taz 1000 with 3 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/><br/><br/>clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2 mm<br/>no. of stand and tension arm units: 5<br/>no. of driven linkage assemblies: 5<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 3,0 kw<br/>length with hand shear: 4.550 mm<br/>length with motorized shear: 5.200 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 2.900 kg<br/><br/><br/><br/> : 4.010 MM
: 1.130 MM
: 180 MM
: 915 MM
: 3,0 KW
: 4.550 MM
: 5.200 MM
: 1.435 MM
: 1.460 MM
: 2.900 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH

GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST


CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST







PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2 MM
NO. OF STAND AND TENSION ARM UNITS: 5
NO. OF DRIVEN LINKAGE ASSEMBLIES: 5
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 3,0 KW
LENGTH WITH HAND SHEAR: 4.550 MM
LENGTH WITH MOTORIZED SHEAR: 5.200 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 2.900 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-year of constr.: 2015
hours of operation machine: 8.429 h (06.03.2019)
pressing force approx.: 360 kn
bending length approx.: 1020 mm
control: tasc 6000
working height approx.: 1150 mm
free stand round about: 932 mm
usable height approx.: 300 mm
space requirements: 1805 x 1330 x 2380 mm
approximate weight machine: 2,600 kg
total connected load approx.: 6 kva

standard equipment

bejyws0sqk
a time program: 6.510 h
press bar runtime: 1: 058 h
cycles press bar: 2.185.654 pcs.

machine
-stable machine frame for standing and seated operation
-deformation enhanced press bar
-highly dynamic, electro. direct drive (torque motor)
-inductive length measuring system with temperature compensation
-enclosure air conditioning
-ergonomic machine design

control
-trump integrated tasc 6000
-numeric workshop programming
-windows xpe, pentium m 1.1 ghz clock frequency
-1 gb ram memory
-15-inch touch screen
-network capable

security
-side hinged doors
-rear protection cover
-2-button foot switch, for standing and seated operation
-ce marking

advanced facilities
-trailing stop system 6 axes

ergonomics package
-comfort plate (front)
-comfort footrest
-2 shelf brackets
-2 document shelves
-lighting of workroom front (led)
-control unit swivel
-sitting and standing support

productivity plus package
-bendguard (with block-laser)
-graphic workshop programming
-automatic tool clamping

technical data subject to change - subject to prior sale
the operating hours for delivery of the machine may differ from the hours recorded in the offer YEAR OF CONSTR.: 2015 HOURS OF OPERATION MACHINE: 8.429 H (06.03.2019) PRESSING FORCE APPROX.: 360 KN BENDING LENGTH APPROX.: 1020 MM CONTROL: TASC 6000 WORKING HEIGHT APPROX.: 1150 MM FREE STAND ROUND ABOUT: 932 MM USABLE HEIGHT APPROX.: 300 MM SPACE REQUIREMENTS: 1805 X 1330 X 2380 MM APPROXIMATE WEIGHT MACHINE: 2,600 KG TOTAL CONNECTED LOAD APPROX.: 6 KVA STANDARD EQUIPMENT BEJYWS0SQK A TIME PROGRAM: 6.510 H PRESS BAR RUNTIME: 1: 058 H CYCLES PRESS BAR: 2.185.654 PCS. MACHINE -STABLE MACHINE FRAME FOR STANDING AND SEATED OPERATION -DEFORMATION ENHANCED PRESS BAR -HIGHLY DYNAMIC, ELECTRO. DIRECT DRIVE (TORQUE MOTOR) -INDUCTIVE LENGTH MEASURING SYSTEM WITH TEMPERATURE COMPENSATION -ENCLOSURE AIR CONDITIONING -ERGONOMIC MACHINE DESIGN CONTROL -TRUMP INTEGRATED TASC 6000 -NUMERIC WORKSHOP PROGRAMMING -WINDOWS XPE, PENTIUM M 1.1 GHZ CLOCK FREQUENCY -1 GB RAM MEMORY -15-INCH TOUCH SCREEN -NETWORK CAPABLE SECURITY -SIDE HINGED DOORS -REAR PROTECTION COVER -2-BUTTON FOOT SWITCH, FOR STANDING AND SEATED OPERATION -CE MARKING ADVANCED FACILITIES -TRAILING STOP SYSTEM 6 AXES ERGONOMICS PACKAGE -COMFORT PLATE (FRONT) -COMFORT FOOTREST -2 SHELF BRACKETS -2 DOCUMENT SHELVES -LIGHTING OF WORKROOM FRONT (LED) -CONTROL UNIT SWIVEL -SITTING AND STANDING SUPPORT PRODUCTIVITY PLUS PACKAGE -BENDGUARD (WITH BLOCK-LASER) -GRAPHIC WORKSHOP PROGRAMMING -AUTOMATIC TOOL CLAMPING TECHNICAL DATA SUBJECT TO CHANGE - SUBJECT TO PRIOR SALE THE OPERATING HOURS FOR DELIVERY OF THE MACHINE MAY DIFFER FROM THE HOURS RECORDED IN THE OFFER
Vendedor: mteg GmbH
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>: 1.000 mm<br/>fully automatic bending in two ways without the need to rotate the sheet<br/>hydraulic drive<br/>bms multi-touch with automatic depth stop<br/>powered rotary shear<br/>additional rail on the bending beam<br/>material support<br/>2x foot pedal<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/>options:<br/><br/><br/>   preserving material support made out of synthetics price on request   hydraulic radius adjustment (air gap adjustment)<br/>the bending capacitiy of aluminium rises up to 2,5mm price on request   extended depth 20 - 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   fully automatic gripper system with 4 gripper units price on request   <br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/><br/><br/><br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 2,00 mm, alu 190 n/mm² = 2,00 mm<br/>shearing capacity motorized shear: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 5<br/>no. of driven linkage assemblies: 5<br/>max. depth: 1.000 mm<br/><br/><br/><br/> : 4.010 MM
: 1.000 MM
FULLY AUTOMATIC BENDING IN TWO WAYS WITHOUT THE NEED TO ROTATE THE SHEET
HYDRAULIC DRIVE
BMS MULTI-TOUCH WITH AUTOMATIC DEPTH STOP
POWERED ROTARY SHEAR
ADDITIONAL RAIL ON THE BENDING BEAM
MATERIAL SUPPORT
2X FOOT PEDAL
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.

OPTIONS:


PRESERVING MATERIAL SUPPORT MADE OUT OF SYNTHETICS PRICE ON REQUEST HYDRAULIC RADIUS ADJUSTMENT (AIR GAP ADJUSTMENT)
THE BENDING CAPACITIY OF ALUMINIUM RISES UP TO 2,5MM PRICE ON REQUEST EXTENDED DEPTH 20 - 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST FULLY AUTOMATIC GRIPPER SYSTEM WITH 4 GRIPPER UNITS PRICE ON REQUEST

PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)








BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 2,00 MM, ALU 190 N/MM² = 2,00 MM
SHEARING CAPACITY MOTORIZED SHEAR: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 5
NO. OF DRIVEN LINKAGE ASSEMBLIES: 5
MAX. DEPTH: 1.000 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.800 €
Ubicación: Land-used metal bandsaw
internal number: m2735

manufacturer kamu karl mã¼ller
hbs type 260 n
ma. no. 517
built in 1986
cutting area
 -90 â° - round - 260 mm
 -90 â° - square - 130 x 230 mm
 -90 â° - rectangle - 300 x 150 mm
 -45 â° - round - 210 mm
 -45 â° - square - 190 x 190 mm
 -45 â° - rectangle - 190 x 190 mm
weight approx. 500 kg

stepless cutting speed
lowering the saw frame with hydraulic adjustable
mitre cuts possible

item location: 58730 frã¶ndenberg/ruhr

the machine can be visited like to see power and tried out.

a forklift/crane for loading is available.

there is the way learned to examine suburb for sale articles. specific questions should be clarified in advance. the information, technical data, dimensions, year, condition are non-binding and were shown to the best of my knowledge and belief. errors are reserved. the warranty / guarantee is excluded. the goods will be sold from location / camp, with national transfer of risk to the buyer, this also applies to a shipping from us, which we have carried out on your behalf. this offer is only to traders, merchants and legal persons.

specified trade names, and trademarks are property of their owners and are used only for identification and description of products.

the structure and the electrical connection of the machine / the device must be carried out by a qualified person trained or checked.

see also my other offers.

the article must be paid unless otherwise agreed within 14 days of invoice creation and picked up.
otherwise, the cost of the storage charge must be made. USED METAL BANDSAW INTERNAL NUMBER: M2735 MANUFACTURER KAMU KARL M&ATILDE;&FRAC14;LLER HBS TYPE 260 N MA. NO. 517 BUILT IN 1986 CUTTING AREA -90 &ACIRC;&DEG; - ROUND - 260 MM -90 &ACIRC;&DEG; - SQUARE - 130 X 230 MM -90 &ACIRC;&DEG; - RECTANGLE - 300 X 150 MM -45 &ACIRC;&DEG; - ROUND - 210 MM -45 &ACIRC;&DEG; - SQUARE - 190 X 190 MM -45 &ACIRC;&DEG; - RECTANGLE - 190 X 190 MM WEIGHT APPROX. 500 KG STEPLESS CUTTING SPEED LOWERING THE SAW FRAME WITH HYDRAULIC ADJUSTABLE MITRE CUTS POSSIBLE ITEM LOCATION: 58730 FR&ATILDE;&PARA;NDENBERG/RUHR THE MACHINE CAN BE VISITED LIKE TO SEE POWER AND TRIED OUT. A FORKLIFT/CRANE FOR LOADING IS AVAILABLE. THERE IS THE WAY LEARNED TO EXAMINE SUBURB FOR SALE ARTICLES. SPECIFIC QUESTIONS SHOULD BE CLARIFIED IN ADVANCE. THE INFORMATION, TECHNICAL DATA, DIMENSIONS, YEAR, CONDITION ARE NON-BINDING AND WERE SHOWN TO THE BEST OF MY KNOWLEDGE AND BELIEF. ERRORS ARE RESERVED. THE WARRANTY / GUARANTEE IS EXCLUDED. THE GOODS WILL BE SOLD FROM LOCATION / CAMP, WITH NATIONAL TRANSFER OF RISK TO THE BUYER, THIS ALSO APPLIES TO A SHIPPING FROM US, WHICH WE HAVE CARRIED OUT ON YOUR BEHALF. THIS OFFER IS ONLY TO TRADERS, MERCHANTS AND LEGAL PERSONS. SPECIFIED TRADE NAMES, AND TRADEMARKS ARE PROPERTY OF THEIR OWNERS AND ARE USED ONLY FOR IDENTIFICATION AND DESCRIPTION OF PRODUCTS. THE STRUCTURE AND THE ELECTRICAL CONNECTION OF THE MACHINE / THE DEVICE MUST BE CARRIED OUT BY A QUALIFIED PERSON TRAINED OR CHECKED. SEE ALSO MY OTHER OFFERS. THE ARTICLE MUST BE PAID UNLESS OTHERWISE AGREED WITHIN 14 DAYS OF INVOICE CREATION AND PICKED UP. OTHERWISE, THE COST OF THE STORAGE CHARGE MUST BE MADE.
Vendedor: Fritz Ernst Maschinenhandel e K
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 2,2 kw<br/>: 4.550 mm<br/>: 5.200 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 2.600 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 3 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/>   graphic touch control with powered back gauge taz 1000 with 3 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/> <br/><br/>clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 1,25 mm, alu 190 n/mm² = 2 mm<br/>no. of stand and tension arm units: 4<br/>no. of driven linkage assemblies: 4<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 2,2 kw<br/>length with hand shear: 4.550 mm<br/>length with motorized shear: 5.200 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 2.600 kg<br/><br/><br/><br/> : 4.010 MM
: 1.130 MM
: 180 MM
: 915 MM
: 2,2 KW
: 4.550 MM
: 5.200 MM
: 1.435 MM
: 1.460 MM
: 2.600 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.


OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH
GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 3 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST
 

CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST







PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,25 MM, ALU 190 N/MM² = 2 MM
NO. OF STAND AND TENSION ARM UNITS: 4
NO. OF DRIVEN LINKAGE ASSEMBLIES: 4
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 2,2 KW
LENGTH WITH HAND SHEAR: 4.550 MM
LENGTH WITH MOTORIZED SHEAR: 5.200 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 2.600 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-teigabwieger werner pfleiderer machines no. h64092649

hopper size: 1150 x 1150 mm

weight range: 400-2400 g

piston size 240 x 110 mm

finish: stainless steel

TEIGABWIEGER WERNER PFLEIDERER MACHINES NO. H64092649 HOPPER SIZE: 1150 X 1150 MM WEIGHT RANGE: 400-2400 G PISTON SIZE 240 X 110 MM FINISH: STAINLESS STEEL
Vendedor: Klaudia Sarnowska
Año de construcción: usado
Ubicación: Land-: 6.200 mm<br/>: 1.130 mm<br/>: 180 mm<br/>: 915 mm<br/>: 4 kw<br/>: 6.730 mm<br/>: 7.380 mm<br/>: 1.435 mm<br/>: 1.460 mm<br/>: 3.800 kg<br/>hydraulic drive<br/>standard control<br/>additional rail on the bending beam<br/>2x foot pedal<br/>removeable material support<br/>safety equipment accoring to the control rules bg germany<br/><br/>stands and tension arms are made of high quality ductile cast iron eliminating any possibility of cracking, breaking, twisting, warping or other distortions.<br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 3,00 mm bending capacity on request.<br/><br/>optional equipment:<br/><br/><br/>   manual rotary shear price on request   powered rotary shear st/al 1,25/1,5 mm price on request   powered rotary shear with cutting head ",s", st/al 1,5/2,0 mm price on request   <br/><br/><br/>control bm 10<br/><br/>   7-inch display, presetting of up to 10 different angles price on request   <br/><br/><br/>control bms 100 <br/>   10-inch display control price on request   <br/><br/><br/>control bms 150<br/>   10-inch display control with powered back gauge taz 1000 with 4 adjustable<br/>gauge fingers, area 22 - 985 mm price on request   <br/><br/><br/>control bms multi-touch<br/>   graphic touch control with powered back gauge taz 1000 with 4 adjustable gauge<br/>fingers, area 22 - 985 mm price on request   <br/><br/><br/><br/>   additional fingers for back gauge taz1000 price on request   pc-software ",bms touch", price on request   <br/><br/><br/> konical back gauge tazk 1000<br/>   seperate gauge finger, driven independant from the back gauge<br/>controlled by control bms touch, area  22 - 985 mm price on request   <br/><br/><br/><br/>   manual back gauge, area 70 - 1000 mm price on request   <br/> <br/>clamping beam adjustment<br/><br/>   manual clamping beam adjustment price on request   hydraulic clamping beam adjustment (incl. manual clamping beam adjustment) price on request   <br/><br/><br/><br/><br/><br/><br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/>bending length: 6.200 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2 mm<br/>no. of stand and tension arm units: 7<br/>no. of driven linkage assemblies: 7<br/>max. depth: 1.130 mm<br/>opening of upper arm: 180 mm<br/>working height: 915 mm<br/>motor-hydraulic: 4 kw<br/>length with hand shear: 6.730 mm<br/>length with motorized shear: 7.380 mm<br/>width: 1.435 mm<br/>height with open arm: 1.460 mm<br/>weight: 3.800 kg<br/><br/><br/><br/> : 6.200 MM
: 1.130 MM
: 180 MM
: 915 MM
: 4 KW
: 6.730 MM
: 7.380 MM
: 1.435 MM
: 1.460 MM
: 3.800 KG
HYDRAULIC DRIVE
STANDARD CONTROL
ADDITIONAL RAIL ON THE BENDING BEAM
2X FOOT PEDAL
REMOVEABLE MATERIAL SUPPORT
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY

STANDS AND TENSION ARMS ARE MADE OF HIGH QUALITY DUCTILE CAST IRON ELIMINATING ANY POSSIBILITY OF CRACKING, BREAKING, TWISTING, WARPING OR OTHER DISTORTIONS.

3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 3,00 MM BENDING CAPACITY ON REQUEST.

OPTIONAL EQUIPMENT:


MANUAL ROTARY SHEAR PRICE ON REQUEST POWERED ROTARY SHEAR ST/AL 1,25/1,5 MM PRICE ON REQUEST POWERED ROTARY SHEAR WITH CUTTING HEAD ",S", ST/AL 1,5/2,0 MM PRICE ON REQUEST


CONTROL BM 10

7-INCH DISPLAY, PRESETTING OF UP TO 10 DIFFERENT ANGLES PRICE ON REQUEST


CONTROL BMS 100
10-INCH DISPLAY CONTROL PRICE ON REQUEST


CONTROL BMS 150
10-INCH DISPLAY CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 4 ADJUSTABLE
GAUGE FINGERS, AREA 22 - 985 MM PRICE ON REQUEST


CONTROL BMS MULTI-TOUCH
GRAPHIC TOUCH CONTROL WITH POWERED BACK GAUGE TAZ 1000 WITH 4 ADJUSTABLE GAUGE
FINGERS, AREA 22 - 985 MM PRICE ON REQUEST



ADDITIONAL FINGERS FOR BACK GAUGE TAZ1000 PRICE ON REQUEST PC-SOFTWARE ",BMS TOUCH", PRICE ON REQUEST


KONICAL BACK GAUGE TAZK 1000
SEPERATE GAUGE FINGER, DRIVEN INDEPENDANT FROM THE BACK GAUGE
CONTROLLED BY CONTROL BMS TOUCH, AREA  22 - 985 MM PRICE ON REQUEST



MANUAL BACK GAUGE, AREA 70 - 1000 MM PRICE ON REQUEST
 
CLAMPING BEAM ADJUSTMENT

MANUAL CLAMPING BEAM ADJUSTMENT PRICE ON REQUEST HYDRAULIC CLAMPING BEAM ADJUSTMENT (INCL. MANUAL CLAMPING BEAM ADJUSTMENT) PRICE ON REQUEST







PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)

BENDING LENGTH: 6.200 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2 MM
NO. OF STAND AND TENSION ARM UNITS: 7
NO. OF DRIVEN LINKAGE ASSEMBLIES: 7
MAX. DEPTH: 1.130 MM
OPENING OF UPPER ARM: 180 MM
WORKING HEIGHT: 915 MM
MOTOR-HYDRAULIC: 4 KW
LENGTH WITH HAND SHEAR: 6.730 MM
LENGTH WITH MOTORIZED SHEAR: 7.380 MM
WIDTH: 1.435 MM
HEIGHT WITH OPEN ARM: 1.460 MM
WEIGHT: 3.800 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-cutting areas: up to diameter 360 mm at 45 â° 220 mm voltage: 380 v - 50 hz power: 4, 3 kw weight: 690 kg rotating frame for miter cuts  CUTTING AREAS: UP TO DIAMETER 360 MM AT 45 &ACIRC;&DEG; 220 MM VOLTAGE: 380 V - 50 HZ POWER: 4, 3 KW WEIGHT: 690 KG ROTATING FRAME FOR MITER CUTS
Vendedor: WTS Maschinenhandels KG
Año de construcción: usado
Precio: 16.800 €
Ubicación: Land-: 2.020 mm<br/>: 4 mm<br/>: 1,5 kw<br/>: 4 kw<br/>: 200 mm<br/>: 60 mm<br/>: 3.500 mm<br/>: 900 mm<br/>: 1.400 mm<br/>: 3.930 kg<br/>mot. folding machine<br/>straight tool<br/>no back gauge<br/>2 stops on bending rail on the front<br/>straight rail ktm 45° new<br/>attachment rail 35 mm regrinded<br/>tabe refinished and insert rail built<br/>equipment: 1x attachment rail alim 15 mm<br/>1x angle rail 150 mm<br/>circuit diagram<br/>users manual in geman + ce<br/><br/>complies with the current industrial safety regulations (amvo &, uvv)<br/><br/><br/><br/><br/>bending length: 2.020 mm<br/>bending power: 4 mm<br/>motor power upper beam: 1,5 kw<br/>motor power bending beam: 4 kw<br/>opening height of upper beam: 200 mm<br/>adjustment area lower beam: 60 mm<br/>bending angle: 0- 135°<br/>motor power: 3+1,5 kw<br/>lowering speed of upper beam: 4,48 mm/sek.<br/>cycle continuous (sheet bending right angle): 10. sek<br/>length: 3.500 mm<br/>width: 900 mm<br/>height: 1.400 mm<br/>weight: 3.930 kg<br/><br/><br/><br/> : 2.020 MM
: 4 MM
: 1,5 KW
: 4 KW
: 200 MM
: 60 MM
: 3.500 MM
: 900 MM
: 1.400 MM
: 3.930 KG
MOT. FOLDING MACHINE
STRAIGHT TOOL
NO BACK GAUGE
2 STOPS ON BENDING RAIL ON THE FRONT
STRAIGHT RAIL KTM 45° NEW
ATTACHMENT RAIL 35 MM REGRINDED
TABE REFINISHED AND INSERT RAIL BUILT
EQUIPMENT: 1X ATTACHMENT RAIL ALIM 15 MM
1X ANGLE RAIL 150 MM
CIRCUIT DIAGRAM
USERS MANUAL IN GEMAN + CE

COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)




BENDING LENGTH: 2.020 MM
BENDING POWER: 4 MM
MOTOR POWER UPPER BEAM: 1,5 KW
MOTOR POWER BENDING BEAM: 4 KW
OPENING HEIGHT OF UPPER BEAM: 200 MM
ADJUSTMENT AREA LOWER BEAM: 60 MM
BENDING ANGLE: 0- 135°
MOTOR POWER: 3+1,5 KW
LOWERING SPEED OF UPPER BEAM: 4,48 MM/SEK.
CYCLE CONTINUOUS (SHEET BENDING RIGHT ANGLE): 10. SEK
LENGTH: 3.500 MM
WIDTH: 900 MM
HEIGHT: 1.400 MM
WEIGHT: 3.930 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Precio: 1.850 €
Ubicación: Land-the cy270n is the perfect universal band saw for every metal worker, artisan, or other professionals.

-the machine is suitable for the cutting of steel, stainless steel and aluminium profiles.
-blade - page guide each 6-set of ball bearings
blade back guide set of ball bearings
-manometer for belt tension
-ergonomic handle
electrical kã¼hlmittellpumpe
-hydrauliches lowering the saw frame (adjustable)
-automatic shut-off
-2 reversible saw speeds
-with sturdy pedestal

data
connection voltage 400 v
motor power 1100 w
coolant pump 100 w
weight approx. 190 kg
machine dimensions lxdxh 1430 x 720 x 1700 mm
cutting speeds 45 + 90 m / min
band saw blade dimensions 2480 x 27 x 0,9 mm
working height 910 mm
cutting capacity round 90 â° and 225 mm
cutting capacity 90 â° 200 x 200 mm square
section flat 90 â° 245 x 150 mm
cutting area around 45â° 160 mm
section square 45 â° 160 x 160 mm
cutting area around 60 â° 100 mm
cutting range, square 60 â° 100 x 100 mm

scope of delivery:
bi metal saw strip
workpiece stop THE CY270N IS THE PERFECT UNIVERSAL BAND SAW FOR EVERY METAL WORKER, ARTISAN, OR OTHER PROFESSIONALS. -THE MACHINE IS SUITABLE FOR THE CUTTING OF STEEL, STAINLESS STEEL AND ALUMINIUM PROFILES. -BLADE - PAGE GUIDE EACH 6-SET OF BALL BEARINGS BLADE BACK GUIDE SET OF BALL BEARINGS -MANOMETER FOR BELT TENSION -ERGONOMIC HANDLE ELECTRICAL K&ATILDE;&FRAC14;HLMITTELLPUMPE -HYDRAULICHES LOWERING THE SAW FRAME (ADJUSTABLE) -AUTOMATIC SHUT-OFF -2 REVERSIBLE SAW SPEEDS -WITH STURDY PEDESTAL DATA CONNECTION VOLTAGE 400 V MOTOR POWER 1100 W COOLANT PUMP 100 W WEIGHT APPROX. 190 KG MACHINE DIMENSIONS LXDXH 1430 X 720 X 1700 MM CUTTING SPEEDS 45 + 90 M / MIN BAND SAW BLADE DIMENSIONS 2480 X 27 X 0,9 MM WORKING HEIGHT 910 MM CUTTING CAPACITY ROUND 90 &ACIRC;&DEG; AND 225 MM CUTTING CAPACITY 90 &ACIRC;&DEG; 200 X 200 MM SQUARE SECTION FLAT 90 &ACIRC;&DEG; 245 X 150 MM CUTTING AREA AROUND 45&ACIRC;&DEG; 160 MM SECTION SQUARE 45 &ACIRC;&DEG; 160 X 160 MM CUTTING AREA AROUND 60 &ACIRC;&DEG; 100 MM CUTTING RANGE, SQUARE 60 &ACIRC;&DEG; 100 X 100 MM SCOPE OF DELIVERY: BI METAL SAW STRIP WORKPIECE STOP
Vendedor: Hagen Busch Maschinenhandel
Año de construcción: usado
Ubicación: Land-: 6.400 mm<br/>: 1.000 mm<br/>fully automatic bending in two ways without the need to rotate the sheet<br/>hydraulic drive<br/>bms multi-touch with automatic depth stop<br/>powered rotary shear<br/>additional rail on the bending beam<br/>material support<br/>2x foot pedal<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/><br/>   preserving material support made out of synthetics price on request   hydraulic radius adjustment (air gap adjustment)<br/>the bending capacitiy of aluminium rises up to 2,5mm price on request   extended depth 20 - 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   fully automatic gripper system with 4 gripper units price on request   <br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/><br/><br/><br/>bending length: 6.400 mm<br/>bending capacity: steel 400 n/mm² = 2,00 mm, alu 190 n/mm² = 2,00 mm<br/>shearing capacity motorized shear: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 7<br/>no. of driven linkage assemblies: 7<br/>max. depth: 1.000 mm<br/><br/><br/><br/> : 6.400 MM
: 1.000 MM
FULLY AUTOMATIC BENDING IN TWO WAYS WITHOUT THE NEED TO ROTATE THE SHEET
HYDRAULIC DRIVE
BMS MULTI-TOUCH WITH AUTOMATIC DEPTH STOP
POWERED ROTARY SHEAR
ADDITIONAL RAIL ON THE BENDING BEAM
MATERIAL SUPPORT
2X FOOT PEDAL
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


PRESERVING MATERIAL SUPPORT MADE OUT OF SYNTHETICS PRICE ON REQUEST HYDRAULIC RADIUS ADJUSTMENT (AIR GAP ADJUSTMENT)
THE BENDING CAPACITIY OF ALUMINIUM RISES UP TO 2,5MM PRICE ON REQUEST EXTENDED DEPTH 20 - 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST FULLY AUTOMATIC GRIPPER SYSTEM WITH 4 GRIPPER UNITS PRICE ON REQUEST

PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)







BENDING LENGTH: 6.400 MM
BENDING CAPACITY: STEEL 400 N/MM² = 2,00 MM, ALU 190 N/MM² = 2,00 MM
SHEARING CAPACITY MOTORIZED SHEAR: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 7
NO. OF DRIVEN LINKAGE ASSEMBLIES: 7
MAX. DEPTH: 1.000 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-ayel-tech round bending machine

type rm 1050 x 90

-capaciteit 1050 x 3 mm
-walsen conisch
-bovenrol wegdraaibare
-remmotor
-voetbediening
-noodstop
-documentatie
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) AYEL-TECH ROUND BENDING MACHINE TYPE RM 1050 X 90 -CAPACITEIT 1050 X 3 MM -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -REMMOTOR -VOETBEDIENING -NOODSTOP -DOCUMENTATIE -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-: 4.010 mm<br/>: 1.000 mm<br/>fully automatic bending in two ways without the need to rotate the sheet<br/>hydraulic drive<br/>bms multi-touch with automatic depth stop<br/>powered rotary shear<br/>additional rail on the bending beam<br/>material support<br/>2x foot pedal<br/>safety equipment accoring to the control rules bg germany<br/><br/><br/>3 year warranty on stands and tension arms.<br/><br/>quality made in germany.<br/><br/>further models from 3 up to 12 m length and from 1,25 mm up to 2,00 mm bending capacity on request.<br/><br/><br/>options:<br/><br/><br/>   preserving material support made out of synthetics price on request   hydraulic radius adjustment (air gap adjustment)<br/>the bending capacitiy of aluminium rises up to 2,5mm price on request   extended depth 20 - 1.250 mm price on request   conical depth stop to bend conical profiles and<br/>narrow/wide bendings for easy intermateing price on request   fully automatic gripper system with 4 gripper units price on request   <br/><br/>prices ex works germany. <br/>transport and commissioning at customers place on request.<br/>(sample photos)<br/><br/><br/><br/><br/><br/><br/><br/>bending length: 4.010 mm<br/>bending capacity: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>shearing capacity motorized shear: steel 400 n/mm² = 1,50 mm, alu 190 n/mm² = 2,00 mm<br/>no. of stand and tension arm units: 3<br/>no. of driven linkage assemblies: 3<br/>max. depth: 1.000 mm<br/><br/><br/><br/> : 4.010 MM
: 1.000 MM
FULLY AUTOMATIC BENDING IN TWO WAYS WITHOUT THE NEED TO ROTATE THE SHEET
HYDRAULIC DRIVE
BMS MULTI-TOUCH WITH AUTOMATIC DEPTH STOP
POWERED ROTARY SHEAR
ADDITIONAL RAIL ON THE BENDING BEAM
MATERIAL SUPPORT
2X FOOT PEDAL
SAFETY EQUIPMENT ACCORING TO THE CONTROL RULES BG GERMANY


3 YEAR WARRANTY ON STANDS AND TENSION ARMS.

QUALITY MADE IN GERMANY.

FURTHER MODELS FROM 3 UP TO 12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.


OPTIONS:


PRESERVING MATERIAL SUPPORT MADE OUT OF SYNTHETICS PRICE ON REQUEST HYDRAULIC RADIUS ADJUSTMENT (AIR GAP ADJUSTMENT)
THE BENDING CAPACITIY OF ALUMINIUM RISES UP TO 2,5MM PRICE ON REQUEST EXTENDED DEPTH 20 - 1.250 MM PRICE ON REQUEST CONICAL DEPTH STOP TO BEND CONICAL PROFILES AND
NARROW/WIDE BENDINGS FOR EASY INTERMATEING PRICE ON REQUEST FULLY AUTOMATIC GRIPPER SYSTEM WITH 4 GRIPPER UNITS PRICE ON REQUEST

PRICES EX WORKS GERMANY.
TRANSPORT AND COMMISSIONING AT CUSTOMERS PLACE ON REQUEST.
(SAMPLE PHOTOS)







BENDING LENGTH: 4.010 MM
BENDING CAPACITY: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
SHEARING CAPACITY MOTORIZED SHEAR: STEEL 400 N/MM² = 1,50 MM, ALU 190 N/MM² = 2,00 MM
NO. OF STAND AND TENSION ARM UNITS: 3
NO. OF DRIVEN LINKAGE ASSEMBLIES: 3
MAX. DEPTH: 1.000 MM



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-ayel-tech round bending machine

type ir 1050 x 46

-capaciteit 1050 x 0.8 mm
-walsen conisch
-bovenrol wegdraaibare
-remmotor
-voetbediening
-noodstop
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) AYEL-TECH ROUND BENDING MACHINE TYPE IR 1050 X 46 -CAPACITEIT 1050 X 0.8 MM -WALSEN CONISCH -BOVENROL WEGDRAAIBARE -REMMOTOR -VOETBEDIENING -NOODSTOP -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Precio: used machinery auction RESALE 4.200 €
Ubicación: Land-weight approx.: 15000 kg<br/>dimensions (l x w x h) approx.: 13000 x 5000 x 5500 mm<br/>description: system consisting of several components:<br> cabin with object silhouette with a height of max. 1800 mm,<br> width max. 600 mm,<br> conveying speed approx. 1 m/min,<br> powder coating device aps 2-6 turrets,<br> footprint of 2 control cabinets each approx. 1150 x 600 mm,<br> 6 basic units for gun control opti tronic,<br> 2 lifting devices acr 1/21,<br> lifting height 3385 mm,<br> max. load 15 kg,<br> quick-colour-changing system magic plus,<br> cabin dimensions inside approx. 4800 x 1200 x 2700 mm,<br> outside approx. 5000 x 1480 x 2950 mm,<br> plastic cabin in sandwich construction,<br> powder recovery with mono cyclone,<br> exhaust air volume approx. 12000 m³/h,<br> sieve swivelling, integrated with machine width of 400 µm,<br> afterfilter exhaust air volume 14000 m³/h,<br> consisting of fan and motor,<br> filer cartridges with autmatic cleaning unit,<br> collection drawer for powder,<br> pressure monitoring,<br> noise level +/- 78 dba,<br> control cabinet ics 600 x 600 mm,<br> various other components.<br> the system was used for the treatment of aluminium shutters,<br> powder center pc 6 for fast processing of the powder,<br> operating manuals are available,<br> including floor plans and detail description in german,<br> control siemens s 7 and itw gema opti tronic,<br> infeed crane system and lateral drying holder.<br> <br> <b>attention: machine may be without ce marking and therefore may not be approved for use or trade within the eu. interested parties have to check this before submitting a bid, e.g. by inspecting the machine on site. surplex cannot issue a ce certificate for machines! due to this probably missing property, a purchase cannot be returned later, your bids are binding.</b> WEIGHT APPROX.: 15000 KG
DIMENSIONS (L X W X H) APPROX.: 13000 X 5000 X 5500 MM
DESCRIPTION: SYSTEM CONSISTING OF SEVERAL COMPONENTS:
CABIN WITH OBJECT SILHOUETTE WITH A HEIGHT OF MAX. 1800 MM,
WIDTH MAX. 600 MM,
CONVEYING SPEED APPROX. 1 M/MIN,
POWDER COATING DEVICE APS 2-6 TURRETS,
FOOTPRINT OF 2 CONTROL CABINETS EACH APPROX. 1150 X 600 MM,
6 BASIC UNITS FOR GUN CONTROL OPTI TRONIC,
2 LIFTING DEVICES ACR 1/21,
LIFTING HEIGHT 3385 MM,
MAX. LOAD 15 KG,
QUICK-COLOUR-CHANGING SYSTEM MAGIC PLUS,
CABIN DIMENSIONS INSIDE APPROX. 4800 X 1200 X 2700 MM,
OUTSIDE APPROX. 5000 X 1480 X 2950 MM,
PLASTIC CABIN IN SANDWICH CONSTRUCTION,
POWDER RECOVERY WITH MONO CYCLONE,
EXHAUST AIR VOLUME APPROX. 12000 M³/H,
SIEVE SWIVELLING, INTEGRATED WITH MACHINE WIDTH OF 400 µM,
AFTERFILTER EXHAUST AIR VOLUME 14000 M³/H,
CONSISTING OF FAN AND MOTOR,
FILER CARTRIDGES WITH AUTMATIC CLEANING UNIT,
COLLECTION DRAWER FOR POWDER,
PRESSURE MONITORING,
NOISE LEVEL +/- 78 DBA,
CONTROL CABINET ICS 600 X 600 MM,
VARIOUS OTHER COMPONENTS.
THE SYSTEM WAS USED FOR THE TREATMENT OF ALUMINIUM SHUTTERS,
POWDER CENTER PC 6 FOR FAST PROCESSING OF THE POWDER,
OPERATING MANUALS ARE AVAILABLE,
INCLUDING FLOOR PLANS AND DETAIL DESCRIPTION IN GERMAN,
CONTROL SIEMENS S 7 AND ITW GEMA OPTI TRONIC,
INFEED CRANE SYSTEM AND LATERAL DRYING HOLDER.

ATTENTION: MACHINE MAY BE WITHOUT CE MARKING AND THEREFORE MAY NOT BE APPROVED FOR USE OR TRADE WITHIN THE EU. INTERESTED PARTIES HAVE TO CHECK THIS BEFORE SUBMITTING A BID, E.G. BY INSPECTING THE MACHINE ON SITE. SURPLEX CANNOT ISSUE A CE CERTIFICATE FOR MACHINES! DUE TO THIS PROBABLY MISSING PROPERTY, A PURCHASE CANNOT BE RETURNED LATER, YOUR BIDS ARE BINDING.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
	
	-bending performance - copper / brass 42 x 1.5 mm
					-steel 40 x 1.5 mm
					-stainless steel 30 x 3.2 mm
					-hydraulic pipes 42 x 3 mm
					-42 x 3 mm aluminium tubes
	-bending radius 3 d and 4 d
	-div. bending tools cast bending segments:
12r58; 14r42; 16r48; 18r54; 20r60; 22r88;
25r75;  â½ "r60;  â¾ "r70; 3/8 "r54; 1 "rca. 100; 11/4 "rca. 140;" 

-drive 220 v / 0,35 kw
	-space requirement approx.		           b 550 x h 350 x t 180 mm - weight approx.						    35 kg
	-mobile roller cabinet with 5 drawers
						           b 950 x h 900 x d 530 mm	
 TECHNICAL DATA: -BENDING PERFORMANCE - COPPER / BRASS 42 X 1.5 MM -STEEL 40 X 1.5 MM -STAINLESS STEEL 30 X 3.2 MM -HYDRAULIC PIPES 42 X 3 MM -42 X 3 MM ALUMINIUM TUBES -BENDING RADIUS 3 D AND 4 D -DIV. BENDING TOOLS CAST BENDING SEGMENTS: 12R58; 14R42; 16R48; 18R54; 20R60; 22R88; 25R75; &ACIRC;&FRAC12; "R60; &ACIRC;&FRAC34; "R70; 3/8 "R54; 1 "RCA. 100; 11/4 "RCA. 140;" -DRIVE 220 V / 0,35 KW -SPACE REQUIREMENT APPROX. B 550 X H 350 X T 180 MM - WEIGHT APPROX. 35 KG -MOBILE ROLLER CABINET WITH 5 DRAWERS B 950 X H 900 X D 530 MM
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 235 / 75 r 17,5; rear tyre size: 235 / 75 r 17,5; accessories: abs; colour: blau; suspension type: luft/luft; cargo space dimensions [lxbxh]: 8450x2460x3050; max payload [kg]: 13700 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 235 / 75 R 17,5; REAR TYRE SIZE: 235 / 75 R 17,5; ACCESSORIES: ABS; COLOUR: BLAU; SUSPENSION TYPE: LUFT/LUFT; CARGO SPACE DIMENSIONS [LXBXH]: 8450X2460X3050; MAX PAYLOAD [KG]: 13700
Vendedor: Gassmann GmbH
Año de construcción: usado
Precio: 850 €
Ubicación: Land-d meat grinder

nagema

type: d-114

technical data:

380 v / 50 hz / 16 a cee plug
    disk diameter 114 mm
    1 screw speed
    with schneckenausstoã?er
    blade unger set 5 pieces
    see accessories original images!
    transmission rate: 800 kg / h
    machine weight: 300 kg
    dimensions h/w/d: of 102 x 㸠65 cm total
    rugged & durable machine
    function tested machine ready for use immediately,

see state original images!

if you have questions call or email. D MEAT GRINDER NAGEMA TYPE: D-114 TECHNICAL DATA: 380 V / 50 HZ / 16 A CEE PLUG DISK DIAMETER 114 MM 1 SCREW SPEED WITH SCHNECKENAUSSTO&ATILDE;?ER BLADE UNGER SET 5 PIECES SEE ACCESSORIES ORIGINAL IMAGES! TRANSMISSION RATE: 800 KG / H MACHINE WEIGHT: 300 KG DIMENSIONS H/W/D: OF 102 X &ATILDE;&CEDIL; 65 CM TOTAL RUGGED & DURABLE MACHINE FUNCTION TESTED MACHINE READY FOR USE IMMEDIATELY, SEE STATE ORIGINAL IMAGES! IF YOU HAVE QUESTIONS CALL OR EMAIL.
Vendedor: MMD-Food-Technik GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-; gross weight [kg]: 18000; transmission: sonstige; front tyre size: 235 / 75 r 17,5; rear tyre size: 235 / 75 r 17,5; accessories: abs; colour: blau; suspension type: luft/luft; cargo space dimensions [lxbxh]: 8450x2460x3050; max payload [kg]: 13700 ; GROSS WEIGHT [KG]: 18000; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: 235 / 75 R 17,5; REAR TYRE SIZE: 235 / 75 R 17,5; ACCESSORIES: ABS; COLOUR: BLAU; SUSPENSION TYPE: LUFT/LUFT; CARGO SPACE DIMENSIONS [LXBXH]: 8450X2460X3050; MAX PAYLOAD [KG]: 13700
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-gr. working width: 2040 mm for sheet metal up to: 3 mm opening distance upper cheek: 250 mm adjustable beam: 115 mm rear gauge: manually adjustable weight: 2250 kg space requirement: 3250 x 900 x 1570 mm 
 GR. WORKING WIDTH: 2040 MM FOR SHEET METAL UP TO: 3 MM OPENING DISTANCE UPPER CHEEK: 250 MM ADJUSTABLE BEAM: 115 MM REAR GAUGE: MANUALLY ADJUSTABLE WEIGHT: 2250 KG SPACE REQUIREMENT: 3250 X 900 X 1570 MM
Vendedor: Kurt Steiger Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-staff twister-f. hamidi - 15-99-004
shipping time: immediately

number: 15-99-004

manufacturer: f.helmich
type: bar turning device

machine data
year built: approx 1980
l x w x h: ca. 2100 x 500 x 800 mm
weight: 200 kg

good general condition

suitable for the twisting of square - steel

technical data - iron twister
max square: approx. 22 x 22 mm
max.vierkant: ca. 12 x 12 mm
max.vierkant: ca. 17 x 17 mm
max.vierkant: ca. 15 x 15 mm
maximum turning length: 1200 mm

twisting levels: left/right incl. timer
power: approx. 2,2 kw
operation: manual / automatic

other accessories on request
price and other specifications on request STAFF TWISTER-F. HAMIDI - 15-99-004 SHIPPING TIME: IMMEDIATELY NUMBER: 15-99-004 MANUFACTURER: F.HELMICH TYPE: BAR TURNING DEVICE MACHINE DATA YEAR BUILT: APPROX 1980 L X W X H: CA. 2100 X 500 X 800 MM WEIGHT: 200 KG GOOD GENERAL CONDITION SUITABLE FOR THE TWISTING OF SQUARE - STEEL TECHNICAL DATA - IRON TWISTER MAX SQUARE: APPROX. 22 X 22 MM MAX.VIERKANT: CA. 12 X 12 MM MAX.VIERKANT: CA. 17 X 17 MM MAX.VIERKANT: CA. 15 X 15 MM MAXIMUM TURNING LENGTH: 1200 MM TWISTING LEVELS: LEFT/RIGHT INCL. TIMER POWER: APPROX. 2,2 KW OPERATION: MANUAL / AUTOMATIC OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 3.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-staff twister-f. hamidi - 15-99-003
shipping time: immediately

number: 15-99-003

manufacturer: f.helmich
type: bar turning device

machine data
year built: approx 1980
l x w x h: ca. 2100 x 500 x 800 mm
weight: 200 kg

good general condition

suitable for the twisting of square - steel

technical data - iron twister
max square: approx. 22 x 22 mm
max.vierkant: ca. 12 x 12 mm
max.vierkant: ca. 17 x 17 mm
max.vierkant: ca. 15 x 15 mm
maximum turning length: 1200 mm

twisting levels: left/right incl. timer
power: approx. 2,2 kw
operation: manual / automatic

other accessories on request
price and other specifications on request STAFF TWISTER-F. HAMIDI - 15-99-003 SHIPPING TIME: IMMEDIATELY NUMBER: 15-99-003 MANUFACTURER: F.HELMICH TYPE: BAR TURNING DEVICE MACHINE DATA YEAR BUILT: APPROX 1980 L X W X H: CA. 2100 X 500 X 800 MM WEIGHT: 200 KG GOOD GENERAL CONDITION SUITABLE FOR THE TWISTING OF SQUARE - STEEL TECHNICAL DATA - IRON TWISTER MAX SQUARE: APPROX. 22 X 22 MM MAX.VIERKANT: CA. 12 X 12 MM MAX.VIERKANT: CA. 17 X 17 MM MAX.VIERKANT: CA. 15 X 15 MM MAXIMUM TURNING LENGTH: 1200 MM TWISTING LEVELS: LEFT/RIGHT INCL. TIMER POWER: APPROX. 2,2 KW OPERATION: MANUAL / AUTOMATIC OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: 2.850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 28.300 €
Ubicación: Land-maximum bending length: 2540 mm
maximum sheet thickness: 3 mm steel
motor-driven backgauge with 3 different anchor points
program control over multibend 2000
automatic bending mode via foot switch
bending rail ground

weight: approx. 3500 kg MAXIMUM BENDING LENGTH: 2540 MM MAXIMUM SHEET THICKNESS: 3 MM STEEL MOTOR-DRIVEN BACKGAUGE WITH 3 DIFFERENT ANCHOR POINTS PROGRAM CONTROL OVER MULTIBEND 2000 AUTOMATIC BENDING MODE VIA FOOT SWITCH BENDING RAIL GROUND WEIGHT: APPROX. 3500 KG
Vendedor: Venker Werkzeugmaschinen GmbH
Año de construcción: usado
Precio: 2.850 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more GEMA types: