52 ofertas

Año de construcción: usado
Precio: 95.000 €
Ubicación: Land-1.	loading belt conveyor (3.500) with inverter, controlled by and synchronized with the speed of the robot pos.5
2.	panel cleaning machine for top and bottom sides and edges our type g95/24
•	ex-proof electrical motors, electrical switchboard on the machine ip.55
3.	triangular bars conveyor for manual stain retouch, double speed complete with photocells, total length 7.000mm.  with automatic and manual control
4.	composition conveyor, with two speeds controlled by photocells 4.500mm long
•	preheating hood equipped with 3 irm lamps, 3,25 kw. each one, recommended to ensure a reasonable temperature on the panel surface to ensure a better floating of the lacquer sprayed on the panel
•	pressurized pre-chamber, directly supplied by the air make unit of the robot room pos.5
•	top fix de-ionizing blowing bar with 20 nozzles
5.	6 axes robotech gs/25 steel belt na 1500 
•	pressurized cabinet with air make-up unit, cleaning box type, to filtrate and supply air into the cabinet of the machine and pressurize it.
•	automatic washing of the guns heads by means of nylon spiral brush started by pneumatic motor
•	reciprocating head for 4 guns
•	scrubber with sludge collection into non-returnable bags
•	steam battery with stainless steel pipes
•	second spray circuit
6-7	flash-off tunnel, with hot air and 126 tlm low pressure uv-lamps consisting of:
•	straight conveying system for a total length of 6.500 mm
•	180° conical rollers curve, average radius 3.500mm.  the curve will be covered with a flash-off hood
•	linear bar conveyor, pitch 100mm, 24.00mm. long, also covered with flash off hood, including in the final part 126 tlm lamps 140 watt each
•	•	ex-proof motors and spark proof fans
8.	uv curing tunnel our type gst 1500/4 - 3d type (2 x ga 80 watt + 2 x mc 80 watt) + 1400/1 for the lower side installed on a transpor11.500mm long .  gallium lamps for the curing of pigmented lacquers. 

cefla finishing, superfici, venjacob. 
can be split to make smaller line if required
in like new condition - only used occasionally. can be seen working.   
price is ex works, monaghan, ireland. purchaser is responsible for dismantling, loading & shipping. 1. LOADING BELT CONVEYOR (3.500) WITH INVERTER, CONTROLLED BY AND SYNCHRONIZED WITH THE SPEED OF THE ROBOT POS.5 2. PANEL CLEANING MACHINE FOR TOP AND BOTTOM SIDES AND EDGES OUR TYPE G95/24 • EX-PROOF ELECTRICAL MOTORS, ELECTRICAL SWITCHBOARD ON THE MACHINE IP.55 3. TRIANGULAR BARS CONVEYOR FOR MANUAL STAIN RETOUCH, DOUBLE SPEED COMPLETE WITH PHOTOCELLS, TOTAL LENGTH 7.000MM. WITH AUTOMATIC AND MANUAL CONTROL 4. COMPOSITION CONVEYOR, WITH TWO SPEEDS CONTROLLED BY PHOTOCELLS 4.500MM LONG • PREHEATING HOOD EQUIPPED WITH 3 IRM LAMPS, 3,25 KW. EACH ONE, RECOMMENDED TO ENSURE A REASONABLE TEMPERATURE ON THE PANEL SURFACE TO ENSURE A BETTER FLOATING OF THE LACQUER SPRAYED ON THE PANEL • PRESSURIZED PRE-CHAMBER, DIRECTLY SUPPLIED BY THE AIR MAKE UNIT OF THE ROBOT ROOM POS.5 • TOP FIX DE-IONIZING BLOWING BAR WITH 20 NOZZLES 5. 6 AXES ROBOTECH GS/25 STEEL BELT NA 1500 • PRESSURIZED CABINET WITH AIR MAKE-UP UNIT, CLEANING BOX TYPE, TO FILTRATE AND SUPPLY AIR INTO THE CABINET OF THE MACHINE AND PRESSURIZE IT. • AUTOMATIC WASHING OF THE GUNS HEADS BY MEANS OF NYLON SPIRAL BRUSH STARTED BY PNEUMATIC MOTOR • RECIPROCATING HEAD FOR 4 GUNS • SCRUBBER WITH SLUDGE COLLECTION INTO NON-RETURNABLE BAGS • STEAM BATTERY WITH STAINLESS STEEL PIPES • SECOND SPRAY CIRCUIT 6-7 FLASH-OFF TUNNEL, WITH HOT AIR AND 126 TLM LOW PRESSURE UV-LAMPS CONSISTING OF: • STRAIGHT CONVEYING SYSTEM FOR A TOTAL LENGTH OF 6.500 MM • 180° CONICAL ROLLERS CURVE, AVERAGE RADIUS 3.500MM. THE CURVE WILL BE COVERED WITH A FLASH-OFF HOOD • LINEAR BAR CONVEYOR, PITCH 100MM, 24.00MM. LONG, ALSO COVERED WITH FLASH OFF HOOD, INCLUDING IN THE FINAL PART 126 TLM LAMPS 140 WATT EACH • • EX-PROOF MOTORS AND SPARK PROOF FANS 8. UV CURING TUNNEL OUR TYPE GST 1500/4 - 3D TYPE (2 X GA 80 WATT + 2 X MC 80 WATT) + 1400/1 FOR THE LOWER SIDE INSTALLED ON A TRANSPOR11.500MM LONG . GALLIUM LAMPS FOR THE CURING OF PIGMENTED LACQUERS. CEFLA FINISHING, SUPERFICI, VENJACOB. CAN BE SPLIT TO MAKE SMALLER LINE IF REQUIRED IN LIKE NEW CONDITION - ONLY USED OCCASIONALLY. CAN BE SEEN WORKING. PRICE IS EX WORKS, MONAGHAN, IRELAND. PURCHASER IS RESPONSIBLE FOR DISMANTLING, LOADING & SHIPPING.
Vendedor: John E Coyle Furniture
Año de construcción: usado
Ubicación: Land-manufacturer: giardina 3 d uv-trockner, type: gst 1400/3 albatros, year: 2005, work piece width min-max mm: 100-1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-60, number of lamps: 3, kw power 1 lamp: 12, lampen gerade eingebaut: yes, adjustable: yes, position of lamps: gerade, power per lamp watt uv: 80, od distance mm: 120, conveyor lenght mm: 3500, feeding speed m/min: 2-7, drive power kw: 1,5, electrical power consumption kw: 44,1, year :2005 MANUFACTURER: GIARDINA 3 D UV-TROCKNER, TYPE: GST 1400/3 ALBATROS, YEAR: 2005, WORK PIECE WIDTH MIN-MAX MM: 100-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, NUMBER OF LAMPS: 3, KW POWER 1 LAMP: 12, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: YES, POSITION OF LAMPS: GERADE, POWER PER LAMP WATT UV: 80, OD DISTANCE MM: 120, CONVEYOR LENGHT MM: 3500, FEEDING SPEED M/MIN: 2-7, DRIVE POWER KW: 1,5, ELECTRICAL POWER CONSUMPTION KW: 44,1, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 19.950 €
Ubicación: Land-giardina drying tunnel
length 18 metres, 
conveyer length 24 metres (can be modified)
internal width 2700mm
internal height 2300mm
a – flash zone
b—first drying section 
c—second drying section
350,000 k cal.
suitable for a variety of uses. 
can be seen working.
price is ex works, monaghan, ireland. purchaser is responsible for dismantling, loading & shipping.   GIARDINA DRYING TUNNEL LENGTH 18 METRES, CONVEYER LENGTH 24 METRES (CAN BE MODIFIED) INTERNAL WIDTH 2700MM INTERNAL HEIGHT 2300MM A – FLASH ZONE B—FIRST DRYING SECTION C—SECOND DRYING SECTION 350,000 K CAL. SUITABLE FOR A VARIETY OF USES. CAN BE SEEN WORKING. PRICE IS EX WORKS, MONAGHAN, IRELAND. PURCHASER IS RESPONSIBLE FOR DISMANTLING, LOADING & SHIPPING.
Vendedor: John E Coyle Furniture
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: apstapelautomat, year: 1994, control: pogramm, stacking device: yes, work piece length max mm: 500-2500, work piece width max mm: 500-1300, min.-max. workpiece height in mm: 10-60, stack height in mm: ca.1300, number of stacks: 2, stack upper edge mm: ca.1600, stack arrangement: 1 reihig, workpiece weight/individual part: ca.80, start of stack in mm: 300, inlet roller conveyor mm: 3000, cycles approx.: ca.8, number of sucking lines: 8, feeding speed max m/min: ca.25, protective panel feeding: no, year :1994 MANUFACTURER: GIARDINA, TYPE: APSTAPELAUTOMAT, YEAR: 1994, CONTROL: POGRAMM, STACKING DEVICE: YES, WORK PIECE LENGTH MAX MM: 500-2500, WORK PIECE WIDTH MAX MM: 500-1300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, STACK HEIGHT IN MM: CA.1300, NUMBER OF STACKS: 2, STACK UPPER EDGE MM: CA.1600, STACK ARRANGEMENT: 1 REIHIG, WORKPIECE WEIGHT/INDIVIDUAL PART: CA.80, START OF STACK IN MM: 300, INLET ROLLER CONVEYOR MM: 3000, CYCLES APPROX.: CA.8, NUMBER OF SUCKING LINES: 8, FEEDING SPEED MAX M/MIN: CA.25, PROTECTIVE PANEL FEEDING: NO, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-size 50 x 70 external uv dryer giardina
can be used also into gto

quit never used  SIZE 50 X 70 EXTERNAL UV DRYER GIARDINA CAN BE USED ALSO INTO GTO QUIT NEVER USED
Vendedor: Tecnoffset S.r.l.
Año de construcción: usado
Ubicación: Land-manufacturer: giardina  uv-trockner, type: gst 1400/3 , year: 1994, work piece width min-max mm: 100-1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-60, number of lamps: 3, kw power 1 lamp: 12, lampen gerade eingebaut: yes, adjustable: yes, position of lamps: gerade, power per lamp watt uv: 80, od distance mm: 120, conveyor lenght mm: ca.4000, feeding speed m/min: 7-21, drive power kw: 1,5, exhaust air diameter mm: 2 x 400, working height in mm: 920, belt conveyor: uv band, electrical power consumption kw: 44,1, year :1994 MANUFACTURER: GIARDINA UV-TROCKNER, TYPE: GST 1400/3 , YEAR: 1994, WORK PIECE WIDTH MIN-MAX MM: 100-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, NUMBER OF LAMPS: 3, KW POWER 1 LAMP: 12, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: YES, POSITION OF LAMPS: GERADE, POWER PER LAMP WATT UV: 80, OD DISTANCE MM: 120, CONVEYOR LENGHT MM: CA.4000, FEEDING SPEED M/MIN: 7-21, DRIVE POWER KW: 1,5, EXHAUST AIR DIAMETER MM: 2 X 400, WORKING HEIGHT IN MM: 920, BELT CONVEYOR: UV BAND, ELECTRICAL POWER CONSUMPTION KW: 44,1, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-code: 0533
brand: giardina
model: 200

sanding dust extraction table 

technical data: 
worktable mm 2000 x 600
n° 18  filter bags 
drawers for dust collection 
n° 2 electric fans    each hp 1,5 -  rpm 940 
overall dimensions : mm 2150 x 1250 x 1500 h
weight  kg  500


 CODE: 0533 BRAND: GIARDINA MODEL: 200 SANDING DUST EXTRACTION TABLE TECHNICAL DATA: WORKTABLE MM 2000 X 600 N° 18 FILTER BAGS DRAWERS FOR DUST COLLECTION N° 2 ELECTRIC FANS EACH HP 1,5 - RPM 940 OVERALL DIMENSIONS : MM 2150 X 1250 X 1500 H WEIGHT KG 500
Vendedor: TOMESANI Srl
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: g 84/20, year: 1994, control: yes, brush type: gekordelt, diameter of brushes: 150, compressed air cleaning: yes, number of units: 2, kw leistung motoren: ca.2, number of rotations controlled: yes, fast exchange device: no, working width mm: 1400, through running hight mm: 150, vacuum belt: no, feeding speed continous adjustable: yes, feeding speed min-max m/min: 7-21, kw-vorschub: ca.1,5, operating side: rechts, product detection: no, electrical hight adjustment: yes, rotor jets: yes, year :1994 MANUFACTURER: GIARDINA, TYPE: G 84/20, YEAR: 1994, CONTROL: YES, BRUSH TYPE: GEKORDELT, DIAMETER OF BRUSHES: 150, COMPRESSED AIR CLEANING: YES, NUMBER OF UNITS: 2, KW LEISTUNG MOTOREN: CA.2, NUMBER OF ROTATIONS CONTROLLED: YES, FAST EXCHANGE DEVICE: NO, WORKING WIDTH MM: 1400, THROUGH RUNNING HIGHT MM: 150, VACUUM BELT: NO, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, FEEDING SPEED MIN-MAX M/MIN: 7-21, KW-VORSCHUB: CA.1,5, OPERATING SIDE: RECHTS, PRODUCT DETECTION: NO, ELECTRICAL HIGHT ADJUSTMENT: YES, ROTOR JETS: YES, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land--year 1992, 4 colours size 71x102 cms. straight machine
-rci 2 table control with ink and plate registers
-rolandmatic dampening , 133 mil. copies, suction air feeder with steel plate
-baldwin automatic blanket washers, quick clamps, powder spray, air drums, chromed cylinders, ir dryer giardina
-in production, any print test possible and available immediately  -YEAR 1992, 4 COLOURS SIZE 71X102 CMS. STRAIGHT MACHINE -RCI 2 TABLE CONTROL WITH INK AND PLATE REGISTERS -ROLANDMATIC DAMPENING , 133 MIL. COPIES, SUCTION AIR FEEDER WITH STEEL PLATE -BALDWIN AUTOMATIC BLANKET WASHERS, QUICK CLAMPS, POWDER SPRAY, AIR DRUMS, CHROMED CYLINDERS, IR DRYER GIARDINA -IN PRODUCTION, ANY PRINT TEST POSSIBLE AND AVAILABLE IMMEDIATELY
Vendedor: MG Macchine Grafiche
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: bl, year: 2000, program: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 500, min.-max. workpiece height in mm: 10-100, operating side: rechts, working height: 920, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 7-21, gummierte auftragswalze mm: yes, gummiqualität : 50, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: 1350, metering roller drive m/min: ca.3-9, attachment bracket roller: yes, everse drive: yes, rbakel: yes, temperiergerät: yes, hight adjustment by engine: yes, type of transportation: rolle, pump system: membrane, year :2000 MANUFACTURER: GIARDINA, TYPE: BL, YEAR: 2000, PROGRAM: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, OPERATING SIDE: RECHTS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 7-21, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALITäT : 50, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: 1350, METERING ROLLER DRIVE M/MIN: CA.3-9, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, TEMPERIERGERäT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, TYPE OF TRANSPORTATION: ROLLE, PUMP SYSTEM: MEMBRANE, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-year 1974 – size 100 x 140 cm – complete of:

rolandmatic dampening – powder spray – uv dryer ist-giardina YEAR 1974 – SIZE 100 X 140 CM – COMPLETE OF: ROLANDMATIC DAMPENING – POWDER SPRAY – UV DRYER IST-GIARDINA
Vendedor: Alcon SRL
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: transportrollengang, year: 1994, total hight mm: 920, adjustable: yes, roller pitch mm: 140, roller diameter: 80, feeding speed min-max m/min: 7-21, drive adjustable: yes, length mm: 2210, driven: yes, width total mm: 1600, drive power kw: ca.2, free text: es fehlen 3 rollen/schwenorichtung 400 mm, year :1994 MANUFACTURER: GIARDINA, TYPE: TRANSPORTROLLENGANG, YEAR: 1994, TOTAL HIGHT MM: 920, ADJUSTABLE: YES, ROLLER PITCH MM: 140, ROLLER DIAMETER: 80, FEEDING SPEED MIN-MAX M/MIN: 7-21, DRIVE ADJUSTABLE: YES, LENGTH MM: 2210, DRIVEN: YES, WIDTH TOTAL MM: 1600, DRIVE POWER KW: CA.2, FREE TEXT: ES FEHLEN 3 ROLLEN/SCHWENORICHTUNG 400 MM, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-oven for uw 50/70 format
 year 2006
 excellent condition with replacement lamp  OVEN FOR UW 50/70 FORMAT YEAR 2006 EXCELLENT CONDITION WITH REPLACEMENT LAMP
Vendedor: C&L INTERNATIONAL LTD
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: gst, year: 1994, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-80, working widht max mm: 1300, number of lamps: 1, kw power 1 lamp: ca.10, lampen gerade eingebaut: yes, adjustable: yes, power per lamp watt uv: 80-120, conveyor lenght mm: 1940, feeding speed m/min: 7-21, conveyor: uv band, year :1994 MANUFACTURER: GIARDINA, TYPE: GST, YEAR: 1994, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-80, WORKING WIDHT MAX MM: 1300, NUMBER OF LAMPS: 1, KW POWER 1 LAMP: CA.10, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: YES, POWER PER LAMP WATT UV: 80-120, CONVEYOR LENGHT MM: 1940, FEEDING SPEED M/MIN: 7-21, CONVEYOR: UV BAND, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-roland 802-6 ,1980
ref.nr : 2306 
manufacturer roland 
model 802-6 
year built : 1980 
max. sheet size : 100x140 cm 
availability : immediately 
condition : fair 
price : on request 


technical spezification : 
•	2 colors ( 1. color printing unit, 2. colors is uv varnish)
•	giardina uv dryer
•	rolandmatic dampening system
 ROLAND 802-6 ,1980 REF.NR : 2306 MANUFACTURER ROLAND MODEL 802-6 YEAR BUILT : 1980 MAX. SHEET SIZE : 100X140 CM AVAILABILITY : IMMEDIATELY CONDITION : FAIR PRICE : ON REQUEST TECHNICAL SPEZIFICATION : • 2 COLORS ( 1. COLOR PRINTING UNIT, 2. COLORS IS UV VARNISH) • GIARDINA UV DRYER • ROLANDMATIC DAMPENING SYSTEM
Vendedor: PP LION GMBH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: bl, year: 2000, program: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 500, min.-max. workpiece height in mm: 10-100, operating side: rechts, working height: 920, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 7-21, gummierte auftragswalze mm: yes, gummiqualität : 50, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: 1350, metering roller drive m/min: ca.3-9, attachment bracket roller: yes, everse drive: yes, rbakel: yes, temperiergerät: yes, hight adjustment by engine: yes, type of transportation: rolle, pump system: membrane, year :2000 MANUFACTURER: GIARDINA, TYPE: BL, YEAR: 2000, PROGRAM: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-100, OPERATING SIDE: RECHTS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 7-21, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALITäT : 50, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: 1350, METERING ROLLER DRIVE M/MIN: CA.3-9, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, TEMPERIERGERäT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, TYPE OF TRANSPORTATION: ROLLE, PUMP SYSTEM: MEMBRANE, YEAR :2000
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-pdc-s
pqc remote control of ink zones, as well lateral, circumferential and diagonal register
komorimatic damping with baldwin circulation and refrigeration
ink temperature control
s-apc semi-automatic plate change
amr automatic size adjustment
automatic ink roller wash-up device
automatic blanket and impression cylinder wash-up device
ionisator in feeder
powder sprayer weko ap 230
ir-dryer giardina
high pile delivery
serial equipment
max. 16'000 sheets / hour 
(without compresor, central air supply) PDC-S PQC REMOTE CONTROL OF INK ZONES, AS WELL LATERAL, CIRCUMFERENTIAL AND DIAGONAL REGISTER KOMORIMATIC DAMPING WITH BALDWIN CIRCULATION AND REFRIGERATION INK TEMPERATURE CONTROL S-APC SEMI-AUTOMATIC PLATE CHANGE AMR AUTOMATIC SIZE ADJUSTMENT AUTOMATIC INK ROLLER WASH-UP DEVICE AUTOMATIC BLANKET AND IMPRESSION CYLINDER WASH-UP DEVICE IONISATOR IN FEEDER POWDER SPRAYER WEKO AP 230 IR-DRYER GIARDINA HIGH PILE DELIVERY SERIAL EQUIPMENT MAX. 16'000 SHEETS / HOUR (WITHOUT COMPRESOR, CENTRAL AIR SUPPLY)
Vendedor: Black Horse Machinery, S.L.
Año de construcción: usado
Ubicación: Land-manufacturer: giardina  uv-trockner, type: gst 1400/3 , year: 1994, work piece width min-max mm: 100-1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-60, number of lamps: 2, kw power 1 lamp: 12, lampen gerade eingebaut: yes, adjustable: yes, position of lamps: gerade, power per lamp watt uv: 80, od distance mm: 120, conveyor lenght mm: 3500, feeding speed m/min: 7-21, drive power kw: 1,5, exhaust air diameter mm: 2 x 400, working height in mm: 920, belt conveyor: uv band, electrical power consumption kw: 44,1, year :1994 MANUFACTURER: GIARDINA UV-TROCKNER, TYPE: GST 1400/3 , YEAR: 1994, WORK PIECE WIDTH MIN-MAX MM: 100-1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, NUMBER OF LAMPS: 2, KW POWER 1 LAMP: 12, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: YES, POSITION OF LAMPS: GERADE, POWER PER LAMP WATT UV: 80, OD DISTANCE MM: 120, CONVEYOR LENGHT MM: 3500, FEEDING SPEED M/MIN: 7-21, DRIVE POWER KW: 1,5, EXHAUST AIR DIAMETER MM: 2 X 400, WORKING HEIGHT IN MM: 920, BELT CONVEYOR: UV BAND, ELECTRICAL POWER CONSUMPTION KW: 44,1, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-uv dryer for size 35/50
mod. 601/2 q, for low and medium pile
aged 2004
with two uv lamps and one ir lamp

dimension: mt 4 x 1,6
kilowatt: 28

really in as new conditions, still working
 UV DRYER FOR SIZE 35/50 MOD. 601/2 Q, FOR LOW AND MEDIUM PILE AGED 2004 WITH TWO UV LAMPS AND ONE IR LAMP DIMENSION: MT 4 X 1,6 KILOWATT: 28 REALLY IN AS NEW CONDITIONS, STILL WORKING
Vendedor: Tecnoffset S.r.l.
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: baby, year: 1994, control: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 500, min.-max. workpiece height in mm: 6-80, working widht max mm: 1300, operating side: rechts, working height: 920, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 7-21, gummierte auftragswalze mm: yes, gummiqualität : 50 shore, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, metering roller drive m/min: ca3-9, attachment bracket roller: yes, rbakel: yes, hight adjustment by engine: yes, pump system: membrane, year :1994 MANUFACTURER: GIARDINA, TYPE: BABY, YEAR: 1994, CONTROL: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 6-80, WORKING WIDHT MAX MM: 1300, OPERATING SIDE: RECHTS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 7-21, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALITäT : 50 SHORE, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, METERING ROLLER DRIVE M/MIN: CA3-9, ATTACHMENT BRACKET ROLLER: YES, RBAKEL: YES, HIGHT ADJUSTMENT BY ENGINE: YES, PUMP SYSTEM: MEMBRANE, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: apstapelautomat giardina, year: 1994, control: giardina, feeding: yes, work piece length max mm: 2500 x 1300, work piece length min mm: 500, work piece width max mm: 1300, min.-max. workpiece height in mm: 10-60, stack height in mm: 1300, number of stacks: 1, stack upper edge mm: 1300, stack arrangement: 1-reihig, workpiece weight/stack position in kg: 20-80, start of stack in mm: 300, max. stack height in mm: 1300, inlet roller conveyor mm: yes, outlet roller conveyor mm: yes mit winkelüberagbe, rotary station from transverse to longitudinal: wendestation, ce-sign: no,  machine ready for demonstration: yes, year :1994 MANUFACTURER: APSTAPELAUTOMAT GIARDINA, YEAR: 1994, CONTROL: GIARDINA, FEEDING: YES, WORK PIECE LENGTH MAX MM: 2500 X 1300, WORK PIECE LENGTH MIN MM: 500, WORK PIECE WIDTH MAX MM: 1300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, STACK HEIGHT IN MM: 1300, NUMBER OF STACKS: 1, STACK UPPER EDGE MM: 1300, STACK ARRANGEMENT: 1-REIHIG, WORKPIECE WEIGHT/STACK POSITION IN KG: 20-80, START OF STACK IN MM: 300, MAX. STACK HEIGHT IN MM: 1300, INLET ROLLER CONVEYOR MM: YES, OUTLET ROLLER CONVEYOR MM: YES MIT WINKELüBERAGBE, ROTARY STATION FROM TRANSVERSE TO LONGITUDINAL: WENDESTATION, CE-SIGN: NO, MACHINE READY FOR DEMONSTRATION: YES, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giradina, type: winkelüberagabe, year: 1994, control: no, working length mm: 3000, working widht mm: 1500, total hight mm: 920, engine power kw: ca.5, feeding speed max m/min: 7-21, feeding speed continous adjustable: yes, working hight adjustable mm: yes, year :1994 MANUFACTURER: GIRADINA, TYPE: WINKELüBERAGABE, YEAR: 1994, CONTROL: NO, WORKING LENGTH MM: 3000, WORKING WIDHT MM: 1500, TOTAL HIGHT MM: 920, ENGINE POWER KW: CA.5, FEEDING SPEED MAX M/MIN: 7-21, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORKING HIGHT ADJUSTABLE MM: YES, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: baby, year: 1994, control: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 500, min.-max. workpiece height in mm: 6-80, working widht max mm: 1300, operating side: rechts, working height: 920, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 7-21, gummierte auftragswalze mm: yes, gummiqualität : 50 shore, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, metering roller drive m/min: ca3-9, attachment bracket roller: yes, rbakel: yes, hight adjustment by engine: yes, pump system: membrane, year :1994 MANUFACTURER: GIARDINA, TYPE: BABY, YEAR: 1994, CONTROL: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 6-80, WORKING WIDHT MAX MM: 1300, OPERATING SIDE: RECHTS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 7-21, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALITäT : 50 SHORE, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, METERING ROLLER DRIVE M/MIN: CA3-9, ATTACHMENT BRACKET ROLLER: YES, RBAKEL: YES, HIGHT ADJUSTMENT BY ENGINE: YES, PUMP SYSTEM: MEMBRANE, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: baby, year: 1994, control: yes, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 500, min.-max. workpiece height in mm: 6-80, working widht max mm: 1300, operating side: rechts, working height: 920, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 7-21, gummierte auftragswalze mm: yes, gummiqualität : 50 shore, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, metering roller drive m/min: ca3-9, attachment bracket roller: yes, rbakel: yes, hight adjustment by engine: yes, pump system: membrane, year :1994 MANUFACTURER: GIARDINA, TYPE: BABY, YEAR: 1994, CONTROL: YES, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 500, MIN.-MAX. WORKPIECE HEIGHT IN MM: 6-80, WORKING WIDHT MAX MM: 1300, OPERATING SIDE: RECHTS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB FüR AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 7-21, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALITäT : 50 SHORE, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, METERING ROLLER DRIVE M/MIN: CA3-9, ATTACHMENT BRACKET ROLLER: YES, RBAKEL: YES, HIGHT ADJUSTMENT BY ENGINE: YES, PUMP SYSTEM: MEMBRANE, YEAR :1994
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: Öl walze, giradina: yes, roller rubber coating: yes, rubber coating length cm: 1450, shore härte: ca. 18, approx. thickness of rubber coating in mm: 25, stahlkerndurchmesser ca. mm: 170, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, rubber coating defective: schleifen, HERSTELLER : GIARDINA, SPARE ROLLER: ÖL WALZE, GIRADINA: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1450, SHORE HäRTE: CA. 18, APPROX. THICKNESS OF RUBBER COATING IN MM: 25, STAHLKERNDURCHMESSER CA. MM: 170, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: SCHLEIFEN,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-lacquer application line\r\nconsising of:\r\n\r\nloading portal\r\nbrand:bargstedt\r\ntype:tbp 01/d\r\nstack height approx. 1700 mm, flush right stacks\r\n\r\nedge spraying automat\r\nbrand: venjakob\r\ntype: vensprayedge\r\nyear: 2011\r\nwerkstückmaße  3,0 x 1,3 x 0,1 m\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype: 040-5\r\nyear: 1979\r\nheating power 35 kw\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype:dtk 4000\r\nyear:1979\r\nheating medium  pww 100/80 \r\n\r\nuv-dryer\r\nbrand: venjakob\r\ntype: 3d 4sk\r\nyear:2011\r\n4 x quick-silver-lamps\r\n\r\nsanding machine\r\nbrand: heesemann\r\ntype: lsm 8\r\nyearr:1999\r\n 3,0 x 1,3 x 0,1 m\r\n2x crosswise / 4x lengthwise\r\n\r\ndust extraction\r\nbrand: heesemann\r\nyear: 1999\r\n\r\nprimer roller\r\nbrand: hymmen\r\ntype: tlx.m\r\nyear: 1990\r\nwater base  1300 x 100 mm\r\n\r\nprimer roller\r\nbrand: hymmen\r\ntype: tlx.m\r\nyear: 1990\r\nwater base  1300 x 100 mm\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype: 080-srl\r\nyear: 1984\r\nheating power 125 kw\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype: dtk 10.000\r\nyear: 1994\r\nheating medium  pww 130/110\r\n\r\ncooling channel\r\nbrand: rippert\r\ntype: dkk 5000\r\nyearr: 1984\r\n\r\nwide belt sanding machine\r\nbrand: heesemann\r\ntype: fga 4\r\nyear: 1984\r\n1 x lengthwise\r\n\r\nlacquer application (roller) for pre-coating\r\nbrand: bürkle\r\ntype: dal-1 1400\r\nyear: 1989\r\n 1300 x 100 mm\r\n\r\nstain application (roller)\r\nbrand: bürkle\r\ntype: dal/b 1400\r\nyear: 1989\r\n 1300 x 100 mm\r\n\r\ndistribution brush\r\nbrand: bürkle\r\ntype: vbm 1400\r\nyear: 1989\r\n3 x brushes\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype: dtk 040\r\nyear: 1992\r\nheating power 38,8 kw\r\n\r\ndrying channel\r\nbrand: rippert\r\ntype: dtk/ifm 4500\r\nyear: 1992\r\nheating medium  pww 90/70\r\n\r\nuv-channel\r\nbrand: venjakob\r\nyear: 1992\r\n1 x quick-silver lamp\r\n\r\nlacquer application (roller), primer/lacquering\r\nbrand: hymmen\r\ntype: tlx 2\r\nyear: 1984\r\n 1,3 x 0,1 m\r\n\r\nlacquer application (roller), primer/lacquering\r\nbrand: hymmen\r\ntype: tlx 2\r\nyear: 1984\r\n 1,3 x 0,1 m\r\n\r\nlacquer application (roller), primer/lacquering\r\nbrand: giardina\r\ntype: g95/07\r\nyear: 1995\r\n 1,3 x 0,1 m\r\n\r\ncooling channel\r\nbrand: rippert\r\ntype: 01-028-ar\r\n\r\ncooling channel\r\nbrand: rippert\r\ntype: 01-028-zr\r\n\r\nuv 2000\r\nbrand: rippert\r\nyear: 1984\r\ntype: uv 2000/1300\r\nheating power 41,6 kw \r\n2 x gallium / 2x quick-silver lamps\r\n\r\nedge sanding\r\nbrand: arminius\r\ntype: s-55-u4 links\r\nyear: 1979\r\n3 x brushes, lengthwise edge\r\n\r\nedge sanding \r\nbrand: arminius\r\ntype: s-55-u4 rechts\r\nyear: 1979\r\n3 x brushes, lengthwise edge\r\n\r\nedge sanding\r\nbrand: heesemann\r\ntype: dsr 2\r\nyear: 1999\r\n2 x brushes, for head edge\r\n\r\nwide belt sanding machine\r\nbrand: heesemann\r\ntype: fga 4\r\nyear: 1984\r\n1 x lengthwise\r\n\r\nlacquer-roller\r\nbrand: bürkle\r\ntype: rcl 09m1300\r\nyear: 2011\r\nworkpiece dimensions  1,3 x 0,1 m\r\n\r\nuv-channel\r\nbrand: bürkle\r\ntype: truv 1300\r\nyear: 2011\r\n1 x quick-silver lamp\r\n\r\nlacquer-roller\r\nbrand: bürkle\r\ntype: rcl 09m1300\r\nyear: 2011\r\nworkpiece dimensions  1,3 x 0,1 m\r\n\r\nuv-channel\r\nbrand: bürkle\r\nyear: 2011\r\n2 x ga = gallium/ 4 x quick-silver lamp\r\n\r\nturner\r\nbrand: bargstedt\r\ntype: ttg 51/2/25/12\r\nyear: 1992\r\n\r\n\r\nnote:\r\nthe specifications and descriptions are a copy of the order confirmation at that time. datas are for information and are not binding.\r\n LACQUER APPLICATION LINE\R\NCONSISING OF:\R\N\R\NLOADING PORTAL\R\NBRAND:BARGSTEDT\R\NTYPE:TBP 01/D\R\NSTACK HEIGHT APPROX. 1700 MM, FLUSH RIGHT STACKS\R\N\R\NEDGE SPRAYING AUTOMAT\R\NBRAND: VENJAKOB\R\NTYPE: VENSPRAYEDGE\R\NYEAR: 2011\R\NWERKSTüCKMAßE 3,0 X 1,3 X 0,1 M\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: 040-5\R\NYEAR: 1979\R\NHEATING POWER 35 KW\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE:DTK 4000\R\NYEAR:1979\R\NHEATING MEDIUM PWW 100/80 \R\N\R\NUV-DRYER\R\NBRAND: VENJAKOB\R\NTYPE: 3D 4SK\R\NYEAR:2011\R\N4 X QUICK-SILVER-LAMPS\R\N\R\NSANDING MACHINE\R\NBRAND: HEESEMANN\R\NTYPE: LSM 8\R\NYEARR:1999\R\N 3,0 X 1,3 X 0,1 M\R\N2X CROSSWISE / 4X LENGTHWISE\R\N\R\NDUST EXTRACTION\R\NBRAND: HEESEMANN\R\NYEAR: 1999\R\N\R\NPRIMER ROLLER\R\NBRAND: HYMMEN\R\NTYPE: TLX.M\R\NYEAR: 1990\R\NWATER BASE 1300 X 100 MM\R\N\R\NPRIMER ROLLER\R\NBRAND: HYMMEN\R\NTYPE: TLX.M\R\NYEAR: 1990\R\NWATER BASE 1300 X 100 MM\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: 080-SRL\R\NYEAR: 1984\R\NHEATING POWER 125 KW\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: DTK 10.000\R\NYEAR: 1994\R\NHEATING MEDIUM PWW 130/110\R\N\R\NCOOLING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: DKK 5000\R\NYEARR: 1984\R\N\R\NWIDE BELT SANDING MACHINE\R\NBRAND: HEESEMANN\R\NTYPE: FGA 4\R\NYEAR: 1984\R\N1 X LENGTHWISE\R\N\R\NLACQUER APPLICATION (ROLLER) FOR PRE-COATING\R\NBRAND: BüRKLE\R\NTYPE: DAL-1 1400\R\NYEAR: 1989\R\N 1300 X 100 MM\R\N\R\NSTAIN APPLICATION (ROLLER)\R\NBRAND: BüRKLE\R\NTYPE: DAL/B 1400\R\NYEAR: 1989\R\N 1300 X 100 MM\R\N\R\NDISTRIBUTION BRUSH\R\NBRAND: BüRKLE\R\NTYPE: VBM 1400\R\NYEAR: 1989\R\N3 X BRUSHES\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: DTK 040\R\NYEAR: 1992\R\NHEATING POWER 38,8 KW\R\N\R\NDRYING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: DTK/IFM 4500\R\NYEAR: 1992\R\NHEATING MEDIUM PWW 90/70\R\N\R\NUV-CHANNEL\R\NBRAND: VENJAKOB\R\NYEAR: 1992\R\N1 X QUICK-SILVER LAMP\R\N\R\NLACQUER APPLICATION (ROLLER), PRIMER/LACQUERING\R\NBRAND: HYMMEN\R\NTYPE: TLX 2\R\NYEAR: 1984\R\N 1,3 X 0,1 M\R\N\R\NLACQUER APPLICATION (ROLLER), PRIMER/LACQUERING\R\NBRAND: HYMMEN\R\NTYPE: TLX 2\R\NYEAR: 1984\R\N 1,3 X 0,1 M\R\N\R\NLACQUER APPLICATION (ROLLER), PRIMER/LACQUERING\R\NBRAND: GIARDINA\R\NTYPE: G95/07\R\NYEAR: 1995\R\N 1,3 X 0,1 M\R\N\R\NCOOLING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: 01-028-AR\R\N\R\NCOOLING CHANNEL\R\NBRAND: RIPPERT\R\NTYPE: 01-028-ZR\R\N\R\NUV 2000\R\NBRAND: RIPPERT\R\NYEAR: 1984\R\NTYPE: UV 2000/1300\R\NHEATING POWER 41,6 KW \R\N2 X GALLIUM / 2X QUICK-SILVER LAMPS\R\N\R\NEDGE SANDING\R\NBRAND: ARMINIUS\R\NTYPE: S-55-U4 LINKS\R\NYEAR: 1979\R\N3 X BRUSHES, LENGTHWISE EDGE\R\N\R\NEDGE SANDING \R\NBRAND: ARMINIUS\R\NTYPE: S-55-U4 RECHTS\R\NYEAR: 1979\R\N3 X BRUSHES, LENGTHWISE EDGE\R\N\R\NEDGE SANDING\R\NBRAND: HEESEMANN\R\NTYPE: DSR 2\R\NYEAR: 1999\R\N2 X BRUSHES, FOR HEAD EDGE\R\N\R\NWIDE BELT SANDING MACHINE\R\NBRAND: HEESEMANN\R\NTYPE: FGA 4\R\NYEAR: 1984\R\N1 X LENGTHWISE\R\N\R\NLACQUER-ROLLER\R\NBRAND: BüRKLE\R\NTYPE: RCL 09M1300\R\NYEAR: 2011\R\NWORKPIECE DIMENSIONS 1,3 X 0,1 M\R\N\R\NUV-CHANNEL\R\NBRAND: BüRKLE\R\NTYPE: TRUV 1300\R\NYEAR: 2011\R\N1 X QUICK-SILVER LAMP\R\N\R\NLACQUER-ROLLER\R\NBRAND: BüRKLE\R\NTYPE: RCL 09M1300\R\NYEAR: 2011\R\NWORKPIECE DIMENSIONS 1,3 X 0,1 M\R\N\R\NUV-CHANNEL\R\NBRAND: BüRKLE\R\NYEAR: 2011\R\N2 X GA = GALLIUM/ 4 X QUICK-SILVER LAMP\R\N\R\NTURNER\R\NBRAND: BARGSTEDT\R\NTYPE: TTG 51/2/25/12\R\NYEAR: 1992\R\N\R\N\R\NNOTE:\R\NTHE SPECIFICATIONS AND DESCRIPTIONS ARE A COPY OF THE ORDER CONFIRMATION AT THAT TIME. DATAS ARE FOR INFORMATION AND ARE NOT BINDING.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Precio: 3.450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-manufacturer: giradina, type: bürste, year: 2005, monting of the machine: bürstenaggregat, number of units: 1, working widht mm: 1300, through running hight max mm: 60, diameter of brushes: 300, number of rotations controlled: no, fast exchange device: yes, through running hight max mm: 60, kw output motor: ca.1,5, free text: maschine ohne welle/, year :2005 MANUFACTURER: GIRADINA, TYPE: BüRSTE, YEAR: 2005, MONTING OF THE MACHINE: BüRSTENAGGREGAT, NUMBER OF UNITS: 1, WORKING WIDHT MM: 1300, THROUGH RUNNING HIGHT MAX MM: 60, DIAMETER OF BRUSHES: 300, NUMBER OF ROTATIONS CONTROLLED: NO, FAST EXCHANGE DEVICE: YES, THROUGH RUNNING HIGHT MAX MM: 60, KW OUTPUT MOTOR: CA.1,5, FREE TEXT: MASCHINE OHNE WELLE/, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: transportriemenübergabe, year: 2005, control: schaltschrank inkl.umrichter, working length mm: 3000, working widht mm: 2 x 900 mm tief, total hight mm: 950, engine power kw: 2 x 1,2 , feeding speed max m/min: 10-30, feeding speed continous adjustable: yes, working hight adjustable mm: yes, belt 1 length width mm: 900 x 3000, unit 1: 1, belt 2 length width mm: 900 x 3000, unit 2: 1, free text: gereinigt lackiert inkl schaltschrank, year :2005 MANUFACTURER: GIARDINA, TYPE: TRANSPORTRIEMENüBERGABE, YEAR: 2005, CONTROL: SCHALTSCHRANK INKL.UMRICHTER, WORKING LENGTH MM: 3000, WORKING WIDHT MM: 2 X 900 MM TIEF, TOTAL HIGHT MM: 950, ENGINE POWER KW: 2 X 1,2 , FEEDING SPEED MAX M/MIN: 10-30, FEEDING SPEED CONTINOUS ADJUSTABLE: YES, WORKING HIGHT ADJUSTABLE MM: YES, BELT 1 LENGTH WIDTH MM: 900 X 3000, UNIT 1: 1, BELT 2 LENGTH WIDTH MM: 900 X 3000, UNIT 2: 1, FREE TEXT: GEREINIGT LACKIERT INKL SCHALTSCHRANK, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: costa giardina tomanin, type: hochglanzlackierstrasse, finished product: hochglanz und glaslackierung, work piece width min-max mm: 150-1300, min.-max. workpiece height in mm: 3-80, min.-max. workpiece length in mm: 150-2800, feeding speed min-max m/min: ca.10, inlet conveyor: yes, 2 paint roller: 2 stück tomanin lackwalze, 2 uv dryer lamps/watt: 1 lampen giardina 80 watt, 3 uv dryer lamps/watt: 2 lampen uv<crlf>giardina 80-120 watt, sanding machine: costa lackschleifmaschine quer/längs, available: sofort, MANUFACTURER: COSTA GIARDINA TOMANIN, TYPE: HOCHGLANZLACKIERSTRASSE, FINISHED PRODUCT: HOCHGLANZ UND GLASLACKIERUNG, WORK PIECE WIDTH MIN-MAX MM: 150-1300, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3-80, MIN.-MAX. WORKPIECE LENGTH IN MM: 150-2800, FEEDING SPEED MIN-MAX M/MIN: CA.10, INLET CONVEYOR: YES, 2 PAINT ROLLER: 2 ST&UUML;CK TOMANIN LACKWALZE, 2 UV DRYER LAMPS/WATT: 1 LAMPEN GIARDINA 80 WATT, 3 UV DRYER LAMPS/WATT: 2 LAMPEN UV<CRLF>GIARDINA 80-120 WATT, SANDING MACHINE: COSTA LACKSCHLEIFMASCHINE QUER/L&AUML;NGS, AVAILABLE: SOFORT,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: gst 1400, year: 2005, work piece width min-max mm: 50-1350, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 10-60, working widht max mm: 1300, number of lamps: 1, kw power 1 lamp: 12, lampen gerade eingebaut: yes, adjustable: no, power per lamp watt uv: 80, od distance mm: 100, conveyor lenght mm: 2000, outer belt width mm: 2450, feeding speed m/min: 8-20, conveyor: stange, drive power kw: 1,2, year :2005 MANUFACTURER: GIARDINA, TYPE: GST 1400, YEAR: 2005, WORK PIECE WIDTH MIN-MAX MM: 50-1350, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 10-60, WORKING WIDHT MAX MM: 1300, NUMBER OF LAMPS: 1, KW POWER 1 LAMP: 12, LAMPEN GERADE EINGEBAUT: YES, ADJUSTABLE: NO, POWER PER LAMP WATT UV: 80, OD DISTANCE MM: 100, CONVEYOR LENGHT MM: 2000, OUTER BELT WIDTH MM: 2450, FEEDING SPEED M/MIN: 8-20, CONVEYOR: STANGE, DRIVE POWER KW: 1,2, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: dualtech 401, year: 2007, control: programm, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 1500, spraying line: ja, conveyour system: band, laquer circles: 3, by rollers: ja, jet dryers (number): 2, sanding machines (number): 1, design sanding machine no 1: costa ct 32/1350, ir dryers (number): 1, belt conveyors (number): 1, jet dryers (number): 2, year :2007 MANUFACTURER: GIARDINA, TYPE: DUALTECH 401, YEAR: 2007, CONTROL: PROGRAMM, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 1500, SPRAYING LINE: JA, CONVEYOUR SYSTEM: BAND, LAQUER CIRCLES: 3, BY ROLLERS: JA, JET DRYERS (NUMBER): 2, SANDING MACHINES (NUMBER): 1, DESIGN SANDING MACHINE NO 1: COSTA CT 32/1350, IR DRYERS (NUMBER): 1, BELT CONVEYORS (NUMBER): 1, JET DRYERS (NUMBER): 2, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina uv walzenbeschichtungsanlage uv, type: gs 01 fwm + st/spc 302/12, year: 2002, control: siemens, work piece width min-max mm: 85-250, min.-max. workpiece length in mm: 1600, min.-max. workpiece height in mm: 8-30, working widht max mm: 300, operating side: links, working height: 950, regelbarer direktantrieb für auftragswalze: yes, auftragswalzengeschwindigkeit m/min.: 60, gummierte auftragswalze mm: yes, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, metering roller drive m/min: 20-30, glättwalzengeschwindigkeit ca.  m/min.: 10-40, widht of roller coater: 320, rbakel: yes, feeding speed min/max: 60, pump system: yes, uv dryer: 12 lampen, ein mann bedienung: yes, vor und rücklauf: yes, kw power 1 lamp: ca.2,5, adjustable: yes, position of lamps: gerade, conveyor lenght mm: 4500, free text: giesskopf  zum aufgiessen von uv-lacken<crlf>kantenbürsten rechts und links,kamm und nut.<crlf>oben, horizontales flächenbürstenaggregat mit rakel, <crlf>           zum vertreiben der lackoberfläche<crlf>unten, stahlgegenwalze mit rakel<crlf><crlf><crlf>, year :2002 MANUFACTURER: GIARDINA UV WALZENBESCHICHTUNGSANLAGE UV, TYPE: GS 01 FWM + ST/SPC 302/12, YEAR: 2002, CONTROL: SIEMENS, WORK PIECE WIDTH MIN-MAX MM: 85-250, MIN.-MAX. WORKPIECE LENGTH IN MM: 1600, MIN.-MAX. WORKPIECE HEIGHT IN MM: 8-30, WORKING WIDHT MAX MM: 300, OPERATING SIDE: LINKS, WORKING HEIGHT: 950, REGELBARER DIREKTANTRIEB F&UUML;R AUFTRAGSWALZE: YES, AUFTRAGSWALZENGESCHWINDIGKEIT M/MIN.: 60, GUMMIERTE AUFTRAGSWALZE MM: YES, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, METERING ROLLER DRIVE M/MIN: 20-30, GL&AUML;TTWALZENGESCHWINDIGKEIT CA. M/MIN.: 10-40, WIDHT OF ROLLER COATER: 320, RBAKEL: YES, FEEDING SPEED MIN/MAX: 60, PUMP SYSTEM: YES, UV DRYER: 12 LAMPEN, EIN MANN BEDIENUNG: YES, VOR UND R&UUML;CKLAUF: YES, KW POWER 1 LAMP: CA.2,5, ADJUSTABLE: YES, POSITION OF LAMPS: GERADE, CONVEYOR LENGHT MM: 4500, FREE TEXT: GIESSKOPF ZUM AUFGIESSEN VON UV-LACKEN<CRLF>KANTENB&UUML;RSTEN RECHTS UND LINKS,KAMM UND NUT.<CRLF>OBEN, HORIZONTALES FL&AUML;CHENB&UUML;RSTENAGGREGAT MIT RAKEL, <CRLF> ZUM VERTREIBEN DER LACKOBERFL&AUML;CHE<CRLF>UNTEN, STAHLGEGENWALZE MIT RAKEL<CRLF><CRLF><CRLF>, YEAR :2002
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: öl walze, giradina: yes, roller rubber coating: yes, rubber coating length cm: 1450, shore härte: 18, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 170, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, HERSTELLER : GIARDINA, SPARE ROLLER: &OUML;L WALZE, GIRADINA: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: 18, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 170, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: uv walze, giradina: yes, roller rubber coating: yes, rubber coating length cm: 1450, shore härte: ca.30, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 170, epdm: poore 2, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, rubber coating defective: neu, HERSTELLER : GIARDINA, SPARE ROLLER: UV WALZE, GIRADINA: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: CA.30, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 170, EPDM: POORE 2, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: NEU,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: uv lackwalze, giradina: yes, rubber coating length cm: 1450, shore härte: ca 50, approx. thickness of rubber coating in mm: 35, stahlkerndurchmesser ca. mm: 170, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, rubber coating defective: schnitt, HERSTELLER : GIARDINA, SPARE ROLLER: UV LACKWALZE, GIRADINA: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: CA 50, APPROX. THICKNESS OF RUBBER COATING IN MM: 35, STAHLKERNDURCHMESSER CA. MM: 170, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: SCHNITT,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: ölwalze, giradina: yes, rubber coating length cm: 1450, shore härte: 18, approx. thickness of rubber coating in mm: 25, stahlkerndurchmesser ca. mm: 170, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, HERSTELLER : GIARDINA, SPARE ROLLER: &OUML;LWALZE, GIRADINA: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: 18, APPROX. THICKNESS OF RUBBER COATING IN MM: 25, STAHLKERNDURCHMESSER CA. MM: 170, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: g02/05, year: 2007, control: siemens op 7, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 150, min.-max. workpiece height in mm: 3 - 100, working height: 950, uv-laquer roller: yes, regelbarer direktantrieb für auftragswalze: yes, direktantrieb dosierwalze: yes, verchromte dosierwalze mm: yes, widht of roller coater: 1450, widht of metering roller: 1450, attachment bracket roller: yes, everse drive: yes, rbakel: yes, heizung: yes, feeding speed min/max: 7 - 20, roller lift out: yes, hight adjustment by engine: yes, pump system: no, wight approx. kg: 1500, required space l x w x h mm: 1000 x 2500 x 1600, year :2007 MANUFACTURER: GIARDINA, TYPE: G02/05, YEAR: 2007, CONTROL: SIEMENS OP 7, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 150, MIN.-MAX. WORKPIECE HEIGHT IN MM: 3 - 100, WORKING HEIGHT: 950, UV-LAQUER ROLLER: YES, REGELBARER DIREKTANTRIEB F&UUML;R AUFTRAGSWALZE: YES, DIREKTANTRIEB DOSIERWALZE: YES, VERCHROMTE DOSIERWALZE MM: YES, WIDHT OF ROLLER COATER: 1450, WIDHT OF METERING ROLLER: 1450, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, HEIZUNG: YES, FEEDING SPEED MIN/MAX: 7 - 20, ROLLER LIFT OUT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, PUMP SYSTEM: NO, WIGHT APPROX. KG: 1500, REQUIRED SPACE L X W X H MM: 1000 X 2500 X 1600, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: uv walze, giradina: yes, roller rubber coating: yes, rubber coating length cm: 1450, shore härte: ca.30, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 170, creasing on a 1 cm: gerillt, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, rubber coating defective: neu, HERSTELLER : GIARDINA, SPARE ROLLER: UV WALZE, GIRADINA: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: CA.30, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 170, CREASING ON A 1 CM: GERILLT, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: NEU,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-hersteller : giardina, spare roller: uv walze, giradina: yes, roller rubber coating: yes, rubber coating length cm: 1450, shore härte: ca.30, approx. thickness of rubber coating in mm: 30, stahlkerndurchmesser ca. mm: 170, diameter of neck: 30-40-60/40-60, total lenght mm: 1820, wedge follower: yes, rubber coating defective: riss, HERSTELLER : GIARDINA, SPARE ROLLER: UV WALZE, GIRADINA: YES, ROLLER RUBBER COATING: YES, RUBBER COATING LENGTH CM: 1450, SHORE H&AUML;RTE: CA.30, APPROX. THICKNESS OF RUBBER COATING IN MM: 30, STAHLKERNDURCHMESSER CA. MM: 170, DIAMETER OF NECK: 30-40-60/40-60, TOTAL LENGHT MM: 1820, WEDGE FOLLOWER: YES, RUBBER COATING DEFECTIVE: RISS,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: lackier-u.beizmasc. g 02/05, year: 2007, control: siemens op 7, work piece width min-max mm: 150, min.-max. workpiece length in mm: 100, min.-max. workpiece height in mm: 1300, working width min min mm: rechts, operating side: 950, stain roller: yes, uv-laquer roller: 1350, regelbarer direktantrieb für auftragswalze: 1350, gummierte auftragswalze mm: yes, gummiqualität : yes, direktantrieb dosierwalze: yes, direktantrieb glättwalze: 7-20, steuerung nicht-ex : yes, widht of roller coater: yes, application roller drive m/min: band, widht of metering roller: membrane, year :2007 MANUFACTURER: GIARDINA, TYPE: LACKIER-U.BEIZMASC. G 02/05, YEAR: 2007, CONTROL: SIEMENS OP 7, WORK PIECE WIDTH MIN-MAX MM: 150, MIN.-MAX. WORKPIECE LENGTH IN MM: 100, MIN.-MAX. WORKPIECE HEIGHT IN MM: 1300, WORKING WIDTH MIN MIN MM: RECHTS, OPERATING SIDE: 950, STAIN ROLLER: YES, UV-LAQUER ROLLER: 1350, REGELBARER DIREKTANTRIEB F&UUML;R AUFTRAGSWALZE: 1350, GUMMIERTE AUFTRAGSWALZE MM: YES, GUMMIQUALIT&AUML;T : YES, DIREKTANTRIEB DOSIERWALZE: YES, DIREKTANTRIEB GL&AUML;TTWALZE: 7-20, STEUERUNG NICHT-EX : YES, WIDHT OF ROLLER COATER: YES, APPLICATION ROLLER DRIVE M/MIN: BAND, WIDHT OF METERING ROLLER: MEMBRANE, YEAR :2007
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: mcd, year: 1992, work piece width min-max mm: 80 - 240, min.-max. workpiece height in mm: 80 - 240, feeding speed m/min: 15 - 50, electrical power consumption kw: 48, free text: 6 uv röhren - 30 kw, year :1992 MANUFACTURER: GIARDINA, TYPE: MCD, YEAR: 1992, WORK PIECE WIDTH MIN-MAX MM: 80 - 240, MIN.-MAX. WORKPIECE HEIGHT IN MM: 80 - 240, FEEDING SPEED M/MIN: 15 - 50, ELECTRICAL POWER CONSUMPTION KW: 48, FREE TEXT: 6 UV R&OUML;HREN - 30 KW, YEAR :1992
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: transportrollgang, roller pitch mm: 140, roller diameter: 60, über frequenz: yes, length mm: 1000, width total mm: 1700, drive power kw: 0,5, free text: rollen werden neu gummiert/maschine gereinigt und lackiert, MANUFACTURER: GIARDINA, TYPE: TRANSPORTROLLGANG, ROLLER PITCH MM: 140, ROLLER DIAMETER: 60, &UUML;BER FREQUENZ: YES, LENGTH MM: 1000, WIDTH TOTAL MM: 1700, DRIVE POWER KW: 0,5, FREE TEXT: ROLLEN WERDEN NEU GUMMIERT/MASCHINE GEREINIGT UND LACKIERT,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: walzlackstrasse , year: 2005 - 2008, destacking plant: zimac, inlet conveyor: yes, paint sander: costa, wast cleaning: yes, paint rollers: 5, uv dryer: 4, conveyour system: band, uv dryer: 4, stacking plant: zimac, year :2005 - 2008 MANUFACTURER: GIARDINA, TYPE: WALZLACKSTRASSE , YEAR: 2005 - 2008, DESTACKING PLANT: ZIMAC, INLET CONVEYOR: YES, PAINT SANDER: COSTA, WAST CLEANING: YES, PAINT ROLLERS: 5, UV DRYER: 4, CONVEYOUR SYSTEM: BAND, UV DRYER: 4, STACKING PLANT: ZIMAC, YEAR :2005 - 2008
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina , type: ersatzauftragswalze neu gummiert, widht of roller coater: 1450, doppelte gummierung: yes gerillt, thickness mm: 35, MANUFACTURER: GIARDINA , TYPE: ERSATZAUFTRAGSWALZE NEU GUMMIERT, WIDHT OF ROLLER COATER: 1450, DOPPELTE GUMMIERUNG: YES GERILLT, THICKNESS MM: 35,
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giradina lackwalze, type: gelaufen in maschine bmg/95/07, year: 1998, year :1998 MANUFACTURER: GIRADINA LACKWALZE, TYPE: GELAUFEN IN MASCHINE BMG/95/07, YEAR: 1998, YEAR :1998
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina , type: wasser uv spritzstrasse, year: 2005, maschinensteuerung übergeordnet: yes, work piece width min-max mm: 900, work piece hight min-max mm: 10-100, work piece length min-max mm: 4500, feeding speed m/min: 2-6, uv track: yes, wasserlackstrasse + uv: yes, inlet conveyor: 2500, dedusters: yes, spraying machine: dualtech 301, 2 lackkreise: yes, belt conveyor: yes, einlaufrollgang: yes, angular transfer: yes, microwellentrocknung: yes, jet drier mm: yes, heating medium hot water: yes, outlet roller conveyor mm: yes, uv trockner lampen: 2 von oben<crlf>1 von unten, wattleistung: 120, adjustable: yes, outlet transport mm: 4500, jet drier: 1, inlet conveyor: 2500, spraying heads - total: 4, work piece detection: yes, conveyour system: rolle-band, spraying stations: 2, fast exchange system spray gun carrier: yes, laquer system - airmix: yes, laquer recharging: yes, by rollers: yes, dry exhauster: yes, year :2005 MANUFACTURER: GIARDINA , TYPE: WASSER UV SPRITZSTRASSE, YEAR: 2005, MASCHINENSTEUERUNG &UUML;BERGEORDNET: YES, WORK PIECE WIDTH MIN-MAX MM: 900, WORK PIECE HIGHT MIN-MAX MM: 10-100, WORK PIECE LENGTH MIN-MAX MM: 4500, FEEDING SPEED M/MIN: 2-6, UV TRACK: YES, WASSERLACKSTRASSE + UV: YES, INLET CONVEYOR: 2500, DEDUSTERS: YES, SPRAYING MACHINE: DUALTECH 301, 2 LACKKREISE: YES, BELT CONVEYOR: YES, EINLAUFROLLGANG: YES, ANGULAR TRANSFER: YES, MICROWELLENTROCKNUNG: YES, JET DRIER MM: YES, HEATING MEDIUM HOT WATER: YES, OUTLET ROLLER CONVEYOR MM: YES, UV TROCKNER LAMPEN: 2 VON OBEN<CRLF>1 VON UNTEN, WATTLEISTUNG: 120, ADJUSTABLE: YES, OUTLET TRANSPORT MM: 4500, JET DRIER: 1, INLET CONVEYOR: 2500, SPRAYING HEADS - TOTAL: 4, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: ROLLE-BAND, SPRAYING STATIONS: 2, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER SYSTEM - AIRMIX: YES, LAQUER RECHARGING: YES, BY ROLLERS: YES, DRY EXHAUSTER: YES, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: mos-micrwellentrockner, year: 2008, control: programm, channel width in mm: 1500, channel height in mm: 2000, channel length in mm: 2900, heating zone length in mm: mos, thermal output: 30.000 kcal h²o, damper register - items: 1 vorlauf 75/55 grad, heating battery: 1, year :2008 MANUFACTURER: GIARDINA, TYPE: MOS-MICRWELLENTROCKNER, YEAR: 2008, CONTROL: PROGRAMM, CHANNEL WIDTH IN MM: 1500, CHANNEL HEIGHT IN MM: 2000, CHANNEL LENGTH IN MM: 2900, HEATING ZONE LENGTH IN MM: MOS, THERMAL OUTPUT: 30.000 KCAL H&SUP2;O, DAMPER REGISTER - ITEMS: 1 VORLAUF 75/55 GRAD, HEATING BATTERY: 1, YEAR :2008
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: giardina, type: lackwalze, year: 1996, control: programm, work piece width min-max mm: 1300, min.-max. workpiece length in mm: 250, min.-max. workpiece height in mm: 6-120, working widht max mm: 1350, operating side: links, working height: 920, uv-laquer roller: yes, widht of roller coater: 1300, application roller drive m/min: yes, widht of metering roller: 1300, attachment bracket roller: yes, everse drive: yes, rbakel: yes, feeding speed min/max: 8-25, roller lift out: yes, hight adjustment by engine: yes, type of transportation: rolle, pump system: membrane, compressed air bar: 6, year :1996 MANUFACTURER: GIARDINA, TYPE: LACKWALZE, YEAR: 1996, CONTROL: PROGRAMM, WORK PIECE WIDTH MIN-MAX MM: 1300, MIN.-MAX. WORKPIECE LENGTH IN MM: 250, MIN.-MAX. WORKPIECE HEIGHT IN MM: 6-120, WORKING WIDHT MAX MM: 1350, OPERATING SIDE: LINKS, WORKING HEIGHT: 920, UV-LAQUER ROLLER: YES, WIDHT OF ROLLER COATER: 1300, APPLICATION ROLLER DRIVE M/MIN: YES, WIDHT OF METERING ROLLER: 1300, ATTACHMENT BRACKET ROLLER: YES, EVERSE DRIVE: YES, RBAKEL: YES, FEEDING SPEED MIN/MAX: 8-25, ROLLER LIFT OUT: YES, HIGHT ADJUSTMENT BY ENGINE: YES, TYPE OF TRANSPORTATION: ROLLE, PUMP SYSTEM: MEMBRANE, COMPRESSED AIR BAR: 6, YEAR :1996
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-manufacturer: spritzstrasse giradina, type: frontenlackieranlage, year: 2005, work piece width min-max mm: 10-1300, work piece hight min-max mm: 5-60, work piece length min-max mm: 100, geamtlänge meter: ca.30, feeding speed m/min: 2,5-5, uv-strasse: yes, wasserlackstrasse: yes, conveyor belts: 2, schleifmaschinen: kein, enstaubungsmaschinen: 1, spraying machine: 1, uv dryer: yes, anzahl lampen: 3, jet drier: 1 mos trockner<crlf>1 düsentrockner, outlet conveyor: yes, wast cleaning: yes, work piece detection: yes, spraying heads - total: 8, work piece detection: yes, conveyour system: band, fast exchange system spray gun carrier: yes, laquer circles: 2, laquer system - airless: yes, laquer system - airmix: yes, laquer recharging: yes, by rollers: yes, by scraper: yes, water cleaning: no, dry exhauster: yes, jet drier length in mm: 10000+17000, outlet conveyor: yes, free text: inkl. reinraumkabine  und zuluftanlage ersatzspritzköpfe und befeuchtung, year :2005 MANUFACTURER: SPRITZSTRASSE GIRADINA, TYPE: FRONTENLACKIERANLAGE, YEAR: 2005, WORK PIECE WIDTH MIN-MAX MM: 10-1300, WORK PIECE HIGHT MIN-MAX MM: 5-60, WORK PIECE LENGTH MIN-MAX MM: 100, GEAMTL&AUML;NGE METER: CA.30, FEEDING SPEED M/MIN: 2,5-5, UV-STRASSE: YES, WASSERLACKSTRASSE: YES, CONVEYOR BELTS: 2, SCHLEIFMASCHINEN: KEIN, ENSTAUBUNGSMASCHINEN: 1, SPRAYING MACHINE: 1, UV DRYER: YES, ANZAHL LAMPEN: 3, JET DRIER: 1 MOS TROCKNER<CRLF>1 D&UUML;SENTROCKNER, OUTLET CONVEYOR: YES, WAST CLEANING: YES, WORK PIECE DETECTION: YES, SPRAYING HEADS - TOTAL: 8, WORK PIECE DETECTION: YES, CONVEYOUR SYSTEM: BAND, FAST EXCHANGE SYSTEM SPRAY GUN CARRIER: YES, LAQUER CIRCLES: 2, LAQUER SYSTEM - AIRLESS: YES, LAQUER SYSTEM - AIRMIX: YES, LAQUER RECHARGING: YES, BY ROLLERS: YES, BY SCRAPER: YES, WATER CLEANING: NO, DRY EXHAUSTER: YES, JET DRIER LENGTH IN MM: 10000+17000, OUTLET CONVEYOR: YES, FREE TEXT: INKL. REINRAUMKABINE UND ZULUFTANLAGE ERSATZSPRITZK&OUML;PFE UND BEFEUCHTUNG, YEAR :2005
Vendedor: Bödeker Holzbearbeitungsmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)