791 ofertas

Año de construcción: usado
Ubicación: Land-product number: 1384
type: flow 350
serial number: 04576
year of construction: 2014
capacity: max 120 packages/min.
bag width: 50 - 350 mm
bag length: unlimited
film thickness: 25 - 130 µ
packaged weight: max 10 kg
film width: max 740 mm
power: 230vac, 50hz, 2kw
pneumatics4 - 6 bar, 200 - 400 l/min.dimensions2450 x 1200 x 2200 mmweight700 kg with adjustable supportplate and combination seal
used for bags of 350 mm PRODUCT NUMBER: 1384 TYPE: FLOW 350 SERIAL NUMBER: 04576 YEAR OF CONSTRUCTION: 2014 CAPACITY: MAX 120 PACKAGES/MIN. BAG WIDTH: 50 - 350 MM BAG LENGTH: UNLIMITED FILM THICKNESS: 25 - 130 µ PACKAGED WEIGHT: MAX 10 KG FILM WIDTH: MAX 740 MM POWER: 230VAC, 50HZ, 2KW PNEUMATICS4 - 6 BAR, 200 - 400 L/MIN.DIMENSIONS2450 X 1200 X 2200 MMWEIGHT700 KG WITH ADJUSTABLE SUPPORTPLATE AND COMBINATION SEAL USED FOR BAGS OF 350 MM
Vendedor: Van Zutphen BV
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-agk table for fish gutting

manufactured year: 2004

condition: excellent

designed for semi-manual processing fish. equipped with a special hook for hanging fish before gutting, device for suction offals and automatic brush for final cleaning of flesh. 

suitable for small restaurants, buffets and fish shops.

an operator can reach capacity in gutting up to 400 per hour.  

power: 0,38 kw

voltage: 380 v \ 50 hz

dimensions (lxwxh): 1200 x 600 x 850 mm

construction of table and order of tools required to all hygiene and safety demands. all internal organs and blood accurately carrying away by the suction device. AGK TABLE FOR FISH GUTTING MANUFACTURED YEAR: 2004 CONDITION: EXCELLENT DESIGNED FOR SEMI-MANUAL PROCESSING FISH. EQUIPPED WITH A SPECIAL HOOK FOR HANGING FISH BEFORE GUTTING, DEVICE FOR SUCTION OFFALS AND AUTOMATIC BRUSH FOR FINAL CLEANING OF FLESH. SUITABLE FOR SMALL RESTAURANTS, BUFFETS AND FISH SHOPS. AN OPERATOR CAN REACH CAPACITY IN GUTTING UP TO 400 PER HOUR. POWER: 0,38 KW VOLTAGE: 380 V \ 50 HZ DIMENSIONS (LXWXH): 1200 X 600 X 850 MM CONSTRUCTION OF TABLE AND ORDER OF TOOLS REQUIRED TO ALL HYGIENE AND SAFETY DEMANDS. ALL INTERNAL ORGANS AND BLOOD ACCURATELY CARRYING AWAY BY THE SUCTION DEVICE.
Vendedor: Normar Trading
Año de construcción: usado
Ubicación: Land-pressure: 360 t<br/>distance between columns: 640 mm<br/>stroke: 90 mm<br/>strokes - infinitely variable: 20-80 hub/min<br/>dayligth: 780 mm<br/>adjustment: 6 mm<br/>table surface area: 580x400 mm<br/>ram surface: 600x410 mm<br/>capacity of ejector in table: 5 t<br/>ejector stroke: 12 mm<br/>total power requirement: 25,4 kw<br/>weight of the machine ca.: 15 t<br/>dimensions of the machine ca.: 3400x2150x3250 mm<br/><br/><br/><br/><br/> PRESSURE: 360 T
DISTANCE BETWEEN COLUMNS: 640 MM
STROKE: 90 MM
STROKES - INFINITELY VARIABLE: 20-80 HUB/MIN
DAYLIGTH: 780 MM
ADJUSTMENT: 6 MM
TABLE SURFACE AREA: 580X400 MM
RAM SURFACE: 600X410 MM
CAPACITY OF EJECTOR IN TABLE: 5 T
EJECTOR STROKE: 12 MM
TOTAL POWER REQUIREMENT: 25,4 KW
WEIGHT OF THE MACHINE CA.: 15 T
DIMENSIONS OF THE MACHINE CA.: 3400X2150X3250 MM




Vendedor: Maschinen Schwartpaul GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used roller folding item of manufacturer's scarce
feet must be ordered separately
condition: fully functional with traces of use
expertly disassembled and packed
drive: flat belt without motor
price per pcs.

<b>technical data:

dimensions of the klappelemts</b>
overall length: 1,280 and 910 mm
total width: 485

<b>information on the role</b>
clamping length approx.: 415 mm
rolling cross sectional area: 50 mm
material: steel, galvanised

<b>information on the framework</b>
height: 90mm
width: 30mm

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED ROLLER FOLDING ITEM OF MANUFACTURER'S SCARCE FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE EXPERTLY DISASSEMBLED AND PACKED DRIVE: FLAT BELT WITHOUT MOTOR PRICE PER PCS. <B>TECHNICAL DATA: DIMENSIONS OF THE KLAPPELEMTS</B> OVERALL LENGTH: 1,280 AND 910 MM TOTAL WIDTH: 485 <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH APPROX.: 415 MM ROLLING CROSS SECTIONAL AREA: 50 MM MATERIAL: STEEL, GALVANISED <B>INFORMATION ON THE FRAMEWORK</B> HEIGHT: 90MM WIDTH: 30MM <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-tenoning spindle: 1 st.<br/>number of milling agregates: 7 st.<br/>spindle diameter: 50 mm<br/>control: pc-steuerung/ nexus <br/><br/>window system weinig unicontrol 12 with cnc spindles, radial / axial cnc,<br/>vario table with horizontal nc axis studio window production possible<br/><br/><br/>- crosscut saw axial nc axis<br/>- rounding unit axial nc axis<br/>- slit spindle with 640 mm length axial nc-axis werkzeugflugkreis max.320<br/>- length stop 3500 mm with nc axis<br/>- 3 profile spindles, each 400 mm in length nc axis axial-radial<br/>- profilfräsaggregat right nc axis axial- radial<br/>- 2 x profile milling units top nc axis axial-radial u.8fach turret<br/>- profilfräsaggregat down nc axis axial-radial<br/>- pc nexus control<br/>- online data transmission<br/>- double parts package<br/>- return conveyor for one-man operation: slat conveyor<br/><br/>detailed technical description can be found in the adjacent pdf file!<br/><br/>option:<br/><br/>- used window tool set oertli iv 67/77 wood / wood-aluminum<br/>- electric drill stegherr fd / e2<br/><br/>(technical information according to manufacturer - without guarantee!)<br/><br/><br/><br/><br/> TENONING SPINDLE: 1 ST.
NUMBER OF MILLING AGREGATES: 7 ST.
SPINDLE DIAMETER: 50 MM
CONTROL: PC-STEUERUNG/ NEXUS

WINDOW SYSTEM WEINIG UNICONTROL 12 WITH CNC SPINDLES, RADIAL / AXIAL CNC,
VARIO TABLE WITH HORIZONTAL NC AXIS STUDIO WINDOW PRODUCTION POSSIBLE


- CROSSCUT SAW AXIAL NC AXIS
- ROUNDING UNIT AXIAL NC AXIS
- SLIT SPINDLE WITH 640 MM LENGTH AXIAL NC-AXIS WERKZEUGFLUGKREIS MAX.320
- LENGTH STOP 3500 MM WITH NC AXIS
- 3 PROFILE SPINDLES, EACH 400 MM IN LENGTH NC AXIS AXIAL-RADIAL
- PROFILFRäSAGGREGAT RIGHT NC AXIS AXIAL- RADIAL
- 2 X PROFILE MILLING UNITS TOP NC AXIS AXIAL-RADIAL U.8FACH TURRET
- PROFILFRäSAGGREGAT DOWN NC AXIS AXIAL-RADIAL
- PC NEXUS CONTROL
- ONLINE DATA TRANSMISSION
- DOUBLE PARTS PACKAGE
- RETURN CONVEYOR FOR ONE-MAN OPERATION: SLAT CONVEYOR

DETAILED TECHNICAL DESCRIPTION CAN BE FOUND IN THE ADJACENT PDF FILE!

OPTION:

- USED WINDOW TOOL SET OERTLI IV 67/77 WOOD / WOOD-ALUMINUM
- ELECTRIC DRILL STEGHERR FD / E2

(TECHNICAL INFORMATION ACCORDING TO MANUFACTURER - WITHOUT GUARANTEE!)




Vendedor: Gebr. Engelfried oHG
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
feet must be ordered separately
material: steel
ideal for fast material handling
expertly disassembled and packed
drive type: round belts with motor

<b>technical data:

mass of rolling railway curve</b>
total width approx.: 485 mm
total width with lateral guide: 550 mm
curve radius approx.: 90 degrees
outer radius: 1,490 mm
inner radius: 810 mm

<b>information on the role</b>
clamping length approx.: 415 mm
roll diameter: 50 mm
material: galvanized
manufacturer: interroll

<b>frame</b>
height: 90mm
width: 30mm

<b>roller rail curve</b>

thanks to the superb craftsmanship of the roller path curve glides your material, even under high load, gently to the place of destination.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP FEET MUST BE ORDERED SEPARATELY MATERIAL: STEEL IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED DRIVE TYPE: ROUND BELTS WITH MOTOR <B>TECHNICAL DATA: MASS OF ROLLING RAILWAY CURVE</B> TOTAL WIDTH APPROX.: 485 MM TOTAL WIDTH WITH LATERAL GUIDE: 550 MM CURVE RADIUS APPROX.: 90 DEGREES OUTER RADIUS: 1,490 MM INNER RADIUS: 810 MM <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH APPROX.: 415 MM ROLL DIAMETER: 50 MM MATERIAL: GALVANIZED MANUFACTURER: INTERROLL <B>FRAME</B> HEIGHT: 90MM WIDTH: 30MM <B>ROLLER RAIL CURVE</B> THANKS TO THE SUPERB CRAFTSMANSHIP OF THE ROLLER PATH CURVE GLIDES YOUR MATERIAL, EVEN UNDER HIGH LOAD, GENTLY TO THE PLACE OF DESTINATION. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 6.900 €
Ubicación: Land-; transmission: sonstige; front tyre size: ; rear tyre size: ; colour: ; wheelbase: ; cargo space dimensions [lxbxh]: xx ; TRANSMISSION: SONSTIGE; FRONT TYRE SIZE: ; REAR TYRE SIZE: ; COLOUR: ; WHEELBASE: ; CARGO SPACE DIMENSIONS [LXBXH]: XX
Vendedor: Gassmann GmbH
Año de construcción: usado
Ubicación: Land-hochleistungsfrã¤scenter huron kx 30
year of construction: 2000
workspace:
-x: 1 â´ 800 mm - y: 1 â´ 000 mm w: 550 mm
spindle: step tec 42 â´ 000 u/mn - 10kw
blffauvk
tool changers: 28 seats
tool measurement: system blum - laser
vacuum plate: yes
spã¤nefã¶rder: yes
control: siemens - 840 d
maintenance: 2009: new spindle
2013: blum, laser measuring head
2017: major revision HOCHLEISTUNGSFR&ATILDE;&CURREN;SCENTER HURON KX 30 YEAR OF CONSTRUCTION: 2000 WORKSPACE: -X: 1 &ACIRC;&ACUTE; 800 MM - Y: 1 &ACIRC;&ACUTE; 000 MM W: 550 MM SPINDLE: STEP TEC 42 &ACIRC;&ACUTE; 000 U/MN - 10KW BLFFAUVK TOOL CHANGERS: 28 SEATS TOOL MEASUREMENT: SYSTEM BLUM - LASER VACUUM PLATE: YES SP&ATILDE;&CURREN;NEF&ATILDE;&PARA;RDER: YES CONTROL: SIEMENS - 840 D MAINTENANCE: 2009: NEW SPINDLE 2013: BLUM, LASER MEASURING HEAD 2017: MAJOR REVISION
Vendedor: IDS Trade GmbH
Año de construcción: usado
Ubicación: Land-please check the plaque for technical specifications.

if you need further information, please feel free to contact us via mail or phone. PLEASE CHECK THE PLAQUE FOR TECHNICAL SPECIFICATIONS. IF YOU NEED FURTHER INFORMATION, PLEASE FEEL FREE TO CONTACT US VIA MAIL OR PHONE.
Vendedor: Dimex Import Export
Año de construcción: usado
Precio: 1.650 €
Ubicación: Land-42 x sfs smart prop plus 20-350 new 㢠36,20eur/st â?¬1520,40 = net
 1 x doka stacking rack new 130,00eur

unlimited quantities / construction support also available separately

prices exclusive vat and transport

-tragkraft min. 20 kn at any extended length (according to german approval z 8,311 946)

maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing

-schnelles and safe release of the clamped support through optimized thread pitch

european community product, produced according to din 1065

tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 mr. becker       42 X SFS SMART PROP PLUS 20-350 NEW &ATILDE;&CENT; 36,20EUR/ST &ACIRC;?&NOT;1520,40 = NET 1 X DOKA STACKING RACK NEW 130,00EUR UNLIMITED QUANTITIES / CONSTRUCTION SUPPORT ALSO AVAILABLE SEPARATELY PRICES EXCLUSIVE VAT AND TRANSPORT -TRAGKRAFT MIN. 20 KN AT ANY EXTENDED LENGTH (ACCORDING TO GERMAN APPROVAL Z 8,311 946) MAINTAINING THE VALUE OF THE SUPPORTS FOR MANY YEARS THANKS TO HIGH-QUALITY MANUFACTURING AND GALVANIZING -SCHNELLES AND SAFE RELEASE OF THE CLAMPED SUPPORT THROUGH OPTIMIZED THREAD PITCH EUROPEAN COMMUNITY PRODUCT, PRODUCED ACCORDING TO DIN 1065 TAP-PROOF WORKS THANKS TO CRUSHING AND RESILIENCY ISSUES LIKE AT 0049 176 70044689 MR. BECKER
Vendedor: SFS Andreas Becker e.Kfm.
Año de construcción: usado
Precio: 150 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.520 €
Ubicación: Land-42 x sfs smart prop plus 20-350 new a 36,20eur/st. â?¬1520,40 =
 1 x doka stack frame new 130,00 eur

42 x sfs smart prop plus 20-300 of new 31,90eur/st
 1 x doka stacking rack new 130,00eur

number of ungebgrenzt / construction support also available separately

prices exclusive vat and transport

-tragkraft min. 20 kn at any extended length (according to german approval z 8,311 946)

maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing

-schnelles and safe release of the clamped support through optimized thread pitch

european community product, produced according to din 1065

tap-proof works thanks to crushing and failover   42 X SFS SMART PROP PLUS 20-350 NEW A 36,20EUR/ST. &ACIRC;?&NOT;1520,40 = 1 X DOKA STACK FRAME NEW 130,00 EUR 42 X SFS SMART PROP PLUS 20-300 OF NEW 31,90EUR/ST 1 X DOKA STACKING RACK NEW 130,00EUR NUMBER OF UNGEBGRENZT / CONSTRUCTION SUPPORT ALSO AVAILABLE SEPARATELY PRICES EXCLUSIVE VAT AND TRANSPORT -TRAGKRAFT MIN. 20 KN AT ANY EXTENDED LENGTH (ACCORDING TO GERMAN APPROVAL Z 8,311 946) MAINTAINING THE VALUE OF THE SUPPORTS FOR MANY YEARS THANKS TO HIGH-QUALITY MANUFACTURING AND GALVANIZING -SCHNELLES AND SAFE RELEASE OF THE CLAMPED SUPPORT THROUGH OPTIMIZED THREAD PITCH EUROPEAN COMMUNITY PRODUCT, PRODUCED ACCORDING TO DIN 1065 TAP-PROOF WORKS THANKS TO CRUSHING AND FAILOVER
Vendedor: SFS Andreas Becker e.Kfm.
Año de construcción: usado
Precio: 380 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.470 €
Ubicación: Land-42 x sfs smart prop plus 20-300 new a 31,90eur/st. â?¬1339,80 =
 1 x doka stack frame new 130,00 eur

42 x sfs smart prop plus 20-350 of new 36,20eur/st
 1 x doka stacking rack new 130,00eur

number of ungebgrenzt / construction support also available separately

prices exclusive vat and transport

-tragkraft min. 20 kn at any extended length (according to german approval z 8,311 946)

maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing

-schnelles and safe release of the clamped support through optimized thread pitch

european community product, produced according to din 1065

tap-proof works thanks to crushing and failover 42 X SFS SMART PROP PLUS 20-300 NEW A 31,90EUR/ST. &ACIRC;?&NOT;1339,80 = 1 X DOKA STACK FRAME NEW 130,00 EUR 42 X SFS SMART PROP PLUS 20-350 OF NEW 36,20EUR/ST 1 X DOKA STACKING RACK NEW 130,00EUR NUMBER OF UNGEBGRENZT / CONSTRUCTION SUPPORT ALSO AVAILABLE SEPARATELY PRICES EXCLUSIVE VAT AND TRANSPORT -TRAGKRAFT MIN. 20 KN AT ANY EXTENDED LENGTH (ACCORDING TO GERMAN APPROVAL Z 8,311 946) MAINTAINING THE VALUE OF THE SUPPORTS FOR MANY YEARS THANKS TO HIGH-QUALITY MANUFACTURING AND GALVANIZING -SCHNELLES AND SAFE RELEASE OF THE CLAMPED SUPPORT THROUGH OPTIMIZED THREAD PITCH EUROPEAN COMMUNITY PRODUCT, PRODUCED ACCORDING TO DIN 1065 TAP-PROOF WORKS THANKS TO CRUSHING AND FAILOVER
Vendedor: SFS Andreas Becker e.Kfm.
Año de construcción: usado
Precio: 490 €
Ubicación: Land-tapping machine, pipe thread cutter, electric tapping screw with quick change cutter heads<br /><br />-for pipe size max. 2 inches<br />-7x jaws 3/8 -2 inches<br />-werkzeugkoffer<br />-dimensions 680/270 / h150 mm<br />-weight 23 kg TAPPING MACHINE, PIPE THREAD CUTTER, ELECTRIC TAPPING SCREW WITH QUICK CHANGE CUTTER HEADS

-FOR PIPE SIZE MAX. 2 INCHES
-7X JAWS 3/8 -2 INCHES
-WERKZEUGKOFFER
-DIMENSIONS 680/270 / H150 MM
-WEIGHT 23 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 24.950 €
Ubicación: Land-milling machine was origin built 1973 2002 rebuilt. rebuilt by copying milling machine cnc control with new drives and new ball screws for x / y / z axes. control serial. fidia type cnc-m 1 with indramat & simatic s5

fidia control for complex and high-precision parts with frequently changing geometry, specifically for tool and mould making

traverse paths x y = 1900 = 900 z = 800
spindle speed max. 1600 rpm
power 33 kw / kva total capacity 70
feed speed 0-6000 mm / min rapid traverse 6000 mm / min
table dimensions 2000 x 1000
electr. automatic central lubrication fabr. schimpke
w-axis heidenhain = display
manual tool mounting sk 50 MILLING MACHINE WAS ORIGIN BUILT 1973 2002 REBUILT. REBUILT BY COPYING MILLING MACHINE CNC CONTROL WITH NEW DRIVES AND NEW BALL SCREWS FOR X / Y / Z AXES. CONTROL SERIAL. FIDIA TYPE CNC-M 1 WITH INDRAMAT & SIMATIC S5 FIDIA CONTROL FOR COMPLEX AND HIGH-PRECISION PARTS WITH FREQUENTLY CHANGING GEOMETRY, SPECIFICALLY FOR TOOL AND MOULD MAKING TRAVERSE PATHS X Y = 1900 = 900 Z = 800 SPINDLE SPEED MAX. 1600 RPM POWER 33 KW / KVA TOTAL CAPACITY 70 FEED SPEED 0-6000 MM / MIN RAPID TRAVERSE 6000 MM / MIN TABLE DIMENSIONS 2000 X 1000 ELECTR. AUTOMATIC CENTRAL LUBRICATION FABR. SCHIMPKE W-AXIS HEIDENHAIN = DISPLAY MANUAL TOOL MOUNTING SK 50
Vendedor: Schweizer Service
Año de construcción: usado
Precio: 170 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-intermeshing mixer, gk-110-e, fabikat werner & pfleiderer, hydraulic hopper, uni-drive gearbox, 630 kw dc drive
INTERMESHING MIXER, GK-110-E, FABIKAT WERNER & PFLEIDERER, HYDRAULIC HOPPER, UNI-DRIVE GEARBOX, 630 KW DC DRIVE
Vendedor: DEWIKO.de Inh. Kicinski
Año de construcción: usado
Precio: 380 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 30.750 PLN
Ubicación: Land-natural gas boiler 2900kw for thermal oil babcock wanson
thermal fluid heater
babcock wanson thermopac 2500 sc
power output of 2900 kw (according to)
output power 2908 kw = 2500 kcal/h x 1000 (according to the)
the year 1994
contents of fluid 1188 litre (catalogue)
fuel-natural gas 300 mbar
3faz. 380v,
reliable and easy to use • boiler type of tpc-b babcock wanson consists of vertical wieloci?gowej furnace chamber, refined through the years in terms of both design and construction. the solution with the facing down flame burner, you can use the free expansion of the coil during operation, eliminating the formation of thermal stress. • integral, cooled from the inside air boiler casing tpc-b, yet perfectly isolates the outer portion of the device from high temperature exhaust, as well as shall constitute the initial combustion air heater/economizer. this type of construction ensures safer operation and longer service life of the device. • the boiler has a fully integrated and tested at the factory process control system, making it much easier to assemble.
more info:
abc://abc.babcock-wanson.pl/resources/fichiers/bw_pl/brochures/tpc-b_kociol_na_olej_termalny.pdf
abc://pdfs.findtheneedle.co.uk/8233-gk-2008-d-gb-nl.pdf
product used
net price £ 25000.00
gross price 30750.00 z?
product code: 6612 NATURAL GAS BOILER 2900KW FOR THERMAL OIL BABCOCK WANSON THERMAL FLUID HEATER BABCOCK WANSON THERMOPAC 2500 SC POWER OUTPUT OF 2900 KW (ACCORDING TO) OUTPUT POWER 2908 KW = 2500 KCAL/H X 1000 (ACCORDING TO THE) THE YEAR 1994 CONTENTS OF FLUID 1188 LITRE (CATALOGUE) FUEL-NATURAL GAS 300 MBAR 3FAZ. 380V, RELIABLE AND EASY TO USE • BOILER TYPE OF TPC-B BABCOCK WANSON CONSISTS OF VERTICAL WIELOCI?GOWEJ FURNACE CHAMBER, REFINED THROUGH THE YEARS IN TERMS OF BOTH DESIGN AND CONSTRUCTION. THE SOLUTION WITH THE FACING DOWN FLAME BURNER, YOU CAN USE THE FREE EXPANSION OF THE COIL DURING OPERATION, ELIMINATING THE FORMATION OF THERMAL STRESS. • INTEGRAL, COOLED FROM THE INSIDE AIR BOILER CASING TPC-B, YET PERFECTLY ISOLATES THE OUTER PORTION OF THE DEVICE FROM HIGH TEMPERATURE EXHAUST, AS WELL AS SHALL CONSTITUTE THE INITIAL COMBUSTION AIR HEATER/ECONOMIZER. THIS TYPE OF CONSTRUCTION ENSURES SAFER OPERATION AND LONGER SERVICE LIFE OF THE DEVICE. • THE BOILER HAS A FULLY INTEGRATED AND TESTED AT THE FACTORY PROCESS CONTROL SYSTEM, MAKING IT MUCH EASIER TO ASSEMBLE. MORE INFO: ABC://ABC.BABCOCK-WANSON.PL/RESOURCES/FICHIERS/BW_PL/BROCHURES/TPC-B_KOCIOL_NA_OLEJ_TERMALNY.PDF ABC://PDFS.FINDTHENEEDLE.CO.UK/8233-GK-2008-D-GB-NL.PDF PRODUCT USED NET PRICE £ 25000.00 GROSS PRICE 30750.00 Z? PRODUCT CODE: 6612
Vendedor: Aman Janusz Mlynarczyk
Año de construcción: usado
Precio: 160 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 650 €
Ubicación: Land-boge pressure safe bps 100 sized pneumatic pressurization system

-guarantee a constant high quality of the compressed air
-ensure a continuous build-up of pressure in the system
to reliably prevent the 'uberfahren' of equipment components,
-keep the pressure in the network constant - low at tempo rar load
-long service life of the plant
-optimize the energy requirements
-after the pressure accumulator installed they make restarting
the compressor after rest periods or periods of low load a
slow and continuous pressure build-up in the network secure
-together pressure build-up - without regulation by bps - the risk
that the high stromungsgeschwindigkeit the capacity of the following components
by far exceed
-in the initial state, the valve is closed, so are
based at start-up of the compressor pressure in the system. only upon reaching a
preset pressure opens the valve and feeds air into the network.
the pressure in front of the bps fall off again and the valve closes.
the process begins again,
-the operating pressure should be the maximum mains pressure 1.5 bar and
is freely adjustable between 0, 5... 7, 5 bar
-the opening and schliesgeschwindigkeit of the valve can be adjusted about chokes

been only briefly in use. BOGE PRESSURE SAFE BPS 100 SIZED PNEUMATIC PRESSURIZATION SYSTEM -GUARANTEE A CONSTANT HIGH QUALITY OF THE COMPRESSED AIR -ENSURE A CONTINUOUS BUILD-UP OF PRESSURE IN THE SYSTEM TO RELIABLY PREVENT THE 'UBERFAHREN' OF EQUIPMENT COMPONENTS, -KEEP THE PRESSURE IN THE NETWORK CONSTANT - LOW AT TEMPO RAR LOAD -LONG SERVICE LIFE OF THE PLANT -OPTIMIZE THE ENERGY REQUIREMENTS -AFTER THE PRESSURE ACCUMULATOR INSTALLED THEY MAKE RESTARTING THE COMPRESSOR AFTER REST PERIODS OR PERIODS OF LOW LOAD A SLOW AND CONTINUOUS PRESSURE BUILD-UP IN THE NETWORK SECURE -TOGETHER PRESSURE BUILD-UP - WITHOUT REGULATION BY BPS - THE RISK THAT THE HIGH STROMUNGSGESCHWINDIGKEIT THE CAPACITY OF THE FOLLOWING COMPONENTS BY FAR EXCEED -IN THE INITIAL STATE, THE VALVE IS CLOSED, SO ARE BASED AT START-UP OF THE COMPRESSOR PRESSURE IN THE SYSTEM. ONLY UPON REACHING A PRESET PRESSURE OPENS THE VALVE AND FEEDS AIR INTO THE NETWORK. THE PRESSURE IN FRONT OF THE BPS FALL OFF AGAIN AND THE VALVE CLOSES. THE PROCESS BEGINS AGAIN, -THE OPERATING PRESSURE SHOULD BE THE MAXIMUM MAINS PRESSURE 1.5 BAR AND IS FREELY ADJUSTABLE BETWEEN 0, 5... 7, 5 BAR -THE OPENING AND SCHLIESGESCHWINDIGKEIT OF THE VALVE CAN BE ADJUSTED ABOUT CHOKES BEEN ONLY BRIEFLY IN USE.
Vendedor: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-top machine with super mass!
hand man ubz nt-g500/300 13
year of construction: 2003
5500 x-y-3200
z-1500
spindle: hsk100 at 10,000 rpm
               hsk 63 at 20,000 rpm
table length: 5000 x 3000 mm
control: fidia

machine is available on request!

see pictures! TOP MACHINE WITH SUPER MASS! HAND MAN UBZ NT-G500/300 13 YEAR OF CONSTRUCTION: 2003 5500 X-Y-3200 Z-1500 SPINDLE: HSK100 AT 10,000 RPM HSK 63 AT 20,000 RPM TABLE LENGTH: 5000 X 3000 MM CONTROL: FIDIA MACHINE IS AVAILABLE ON REQUEST! SEE PICTURES!
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 1.425 €
Ubicación: Land-rolling curve 90 â°, conveyor curves
make: transnorm
type: ts 2712
year of manufacture: 2009
order no. n144304
pos. 1060
conveyor angle: 90 â°
request width: 600 mm
total width outside: 680 mm
inner radius: 816 mm
foerdergeschwindigket: v = 0.58 m/sec
drive center
role: slide stored with conical plastic molding

without posts
optional: 2 columns 138,--euro

shipping weight: 130 kg on euro pallet
transportmasze: l x b x h = 1800 x 800 x 450 mm ROLLING CURVE 90 &ACIRC;&DEG;, CONVEYOR CURVES MAKE: TRANSNORM TYPE: TS 2712 YEAR OF MANUFACTURE: 2009 ORDER NO. N144304 POS. 1060 CONVEYOR ANGLE: 90 &ACIRC;&DEG; REQUEST WIDTH: 600 MM TOTAL WIDTH OUTSIDE: 680 MM INNER RADIUS: 816 MM FOERDERGESCHWINDIGKET: V = 0.58 M/SEC DRIVE CENTER ROLE: SLIDE STORED WITH CONICAL PLASTIC MOLDING WITHOUT POSTS OPTIONAL: 2 COLUMNS 138,--EURO SHIPPING WEIGHT: 130 KG ON EURO PALLET TRANSPORTMASZE: L X B X H = 1800 X 800 X 450 MM
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Precio: 200 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-tgw curves roller conveyors 45â° linksauftrag nr. 150072pos. 03.0721baujahr: 2012-working width: 345 mm kunststoffrollennutzbreite: 400 mm metallrollengesamtbreite: 480 mminnenradius: 1050 mmgeschwindigkeit: 0.45 m / secseitenfã¼hrung beidseitigrollen: conical plastic formteilrollen: metalloptional: 3 supports a' â?¬ 69,00versandabmessungen: lxwxh 2200 x 800 x 400 mm: 90 kg  TGW CURVES ROLLER CONVEYORS 45&ACIRC;&DEG; LINKSAUFTRAG NR. 150072POS. 03.0721BAUJAHR: 2012-WORKING WIDTH: 345 MM KUNSTSTOFFROLLENNUTZBREITE: 400 MM METALLROLLENGESAMTBREITE: 480 MMINNENRADIUS: 1050 MMGESCHWINDIGKEIT: 0.45 M / SECSEITENF&ATILDE;&FRAC14;HRUNG BEIDSEITIGROLLEN: CONICAL PLASTIC FORMTEILROLLEN: METALLOPTIONAL: 3 SUPPORTS A' &ACIRC;?&NOT; 69,00VERSANDABMESSUNGEN: LXWXH 2200 X 800 X 400 MM: 90 KG
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Precio: 350 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-conveyor angle: 90 â° width: 490 mmgesamtbreite: 530 mminnenradius: ir = 1200 mmfoerdergeschwindigkeit: v = 0.33 m / sbdwhbc0ly7rollen: sliding bearing with tapered plastic formteiloptional available: 2 support, price â?¬138,00 transport dimensions: l x b x h = 1800 x 700 x 400transportgewicht: 60 kg  CONVEYOR ANGLE: 90 &ACIRC;&DEG; WIDTH: 490 MMGESAMTBREITE: 530 MMINNENRADIUS: IR = 1200 MMFOERDERGESCHWINDIGKEIT: V = 0.33 M / SBDWHBC0LY7ROLLEN: SLIDING BEARING WITH TAPERED PLASTIC FORMTEILOPTIONAL AVAILABLE: 2 SUPPORT, PRICE &ACIRC;?&NOT;138,00 TRANSPORT DIMENSIONS: L X B X H = 1800 X 700 X 400TRANSPORTGEWICHT: 60 KG
Vendedor: Dr. Sonntag Industriebedarf u. Logistikplanung
Año de construcción: usado
Precio: 65 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 215.000 €
Ubicación: Land-2 gass-automatic satellite pallet storage (compact bearing, channel storage) 5 or 6 deep pallet storage, nedcon, approx. 4614 pitches, 1to / pallet incl. pallet conveyor system - second-hand -:
 
price from site: â?¬215.000.-(net), plus montages etc.!

the facility has received a "refresher" time, and is now able to move pallets in the system. that is, it is also possible to store different products a channel.

satellite camp (also known as satellite warehouse) is a subgroup of the compact bearing and channel storage. pallets in a row at tracks in the channel. in the rail, a correspondingly shallow processing unit, the satellite, pallets can pass and carry lift, to make such retention and relocation. the satellite enters via a regalfã¶rderzeug with appropriate recording device to a channel.

an upstream picking area is included!

manufacturer: westfalia systems engineering / nedcon
type: satellite shelving
year built: 1996, initial start-up: 1997 (new software 2016)
floor space: 52.830 x 25.650 mm
height: 18.150mm
pro box 8 putaway pave over each other
2 lanes
each block 28 fields side by side
block 1: maximum 6 pallets at a time per channel
blocks 2-4: 5 pallets at a time per channel
compartment height: 2,100 mm
tray load:-block 01 = 6,000 kg
-block 02 - 04 = 5,000 kg
field load:-block 01 = 48,000 kg
block 02 - 04 = 40,000 kg stacker cranes: 2
contour control: 1
warehouse management system: savanna year 2016
breakdown: 4 shelf blocks, 8 levels
cargo: pallets 800 x 1,200 mm max. 1,000 x 1,380 mm height of pallet incl. pallet of to 1,700 mm of maximum 1,100 kg pallet weight pallet securing: foil
power connection: 65 kw
the shelving system is a satellite shelving.
the channel storage technology is particularly suitable for high levels of individual articles within less product groups. in a channel bearing several loading units are positioned in a row in so-called channels on rails and using special conveyor technology and outsourced.
the advantage is in comparison to a conventional high bay warehousing, in the higher space.
the satellite warehouse has storage channels, where the chargers multiple deep are deposited. the displacement is achieved according to the lifo principle. with a rail-guided regalfã¶rderzeug is accessed on the bearing channels. the regalfã¶rderzeug is firmly anchored in a warehouse alley. in the regalfã¶rderzeug, a so-called satellite is installed instead of a telescopic fork. the shuttle is an autonomous vehicle with very low height. the vehicle after reaching the x and z coordinates of the storage compartment, detaches from the regalfã¶rderzeug and moves into the shelf. it is equipped with a lifting device and can independently on the chargers - and unload. the crossbar of the rack warehouse have two horizontal surfaces: the upper surface is the surface of the charger and the lower surface is used as a surface for the shuttle.
advantages of satellite shelving are the compact, space-saving storage, automation and direct access. 
condition: good - end 2018 still in operation can be done in
available: available now
location: nrw (space neuss)

cargo: pallets according to din 15146 tl. 2
pallet height 1700 mm hd. range
weight min. 80 kg - max. 1100 kg
average weight max. 1000 kg
pack security: the transported material is generally wrapped with foil.
pallets from outside or rest pallets are also wound on 'emergency stop' the value of g can &gt; 0.8 m / sec2
temperature: operating room temperature +5-+40 â° c
relative humidity: <75% relative="" luftfeuchtigkeit="" geschwindigkeiten:="" rfz-horizontal="" vmax="200" m/min="" rfz-vertikal="" v="" max="90" m/min="" rfz-satellit="" v="" max="83" m/min="" fã¶rderer-horizontal="" v="" max="15" m/min="" quertransportwagen="" (30.10)="" v="" max="100" m/min="" quertransportwagen="" (20.17)="" v="" max="27" m/min="" quertransportwagen="" (30.05)="" v="" max="160" m/min="" elektrische="" versorgung:="" drehstrom="" 400="" v;="" 50="" hz="" (3x="" ph,="" 1x="" pe,="" 1x="" n)="" stromanschluã?:="" regalfahrzeug="je" 100="" amp="" nennstrom="" fã¶rdertechnik="65" kw="" summierte="" nennleistung="">1 supply point site
gleichzeitfakfor = 1 j
air requirement: approx. 980 l/min min 6 bar dry
surface: conveying systems ral 7001 pearl grey
galvanized base constructions
regalfã¶rderzeug ral 3004 purple red
roll coat galvanized
safety fencing galvanized (wst-standard)
floor: flatness tolerances according to fem 9.831 standard
up to 150 mm deep dã¼belbar. load max. 500 n/cm2 surface load conveyor underfoot.
on-site services: 1, e-connections at the designated cabinet
 </75%> 2 GASS-AUTOMATIC SATELLITE PALLET STORAGE (COMPACT BEARING, CHANNEL STORAGE) 5 OR 6 DEEP PALLET STORAGE, NEDCON, APPROX. 4614 PITCHES, 1TO / PALLET INCL. PALLET CONVEYOR SYSTEM - SECOND-HAND -: PRICE FROM SITE: &ACIRC;?&NOT;215.000.-(NET), PLUS MONTAGES ETC.! THE FACILITY HAS RECEIVED A "REFRESHER" TIME, AND IS NOW ABLE TO MOVE PALLETS IN THE SYSTEM. THAT IS, IT IS ALSO POSSIBLE TO STORE DIFFERENT PRODUCTS A CHANNEL. SATELLITE CAMP (ALSO KNOWN AS SATELLITE WAREHOUSE) IS A SUBGROUP OF THE COMPACT BEARING AND CHANNEL STORAGE. PALLETS IN A ROW AT TRACKS IN THE CHANNEL. IN THE RAIL, A CORRESPONDINGLY SHALLOW PROCESSING UNIT, THE SATELLITE, PALLETS CAN PASS AND CARRY LIFT, TO MAKE SUCH RETENTION AND RELOCATION. THE SATELLITE ENTERS VIA A REGALF&ATILDE;&PARA;RDERZEUG WITH APPROPRIATE RECORDING DEVICE TO A CHANNEL. AN UPSTREAM PICKING AREA IS INCLUDED! MANUFACTURER: WESTFALIA SYSTEMS ENGINEERING / NEDCON TYPE: SATELLITE SHELVING YEAR BUILT: 1996, INITIAL START-UP: 1997 (NEW SOFTWARE 2016) FLOOR SPACE: 52.830 X 25.650 MM HEIGHT: 18.150MM PRO BOX 8 PUTAWAY PAVE OVER EACH OTHER 2 LANES EACH BLOCK 28 FIELDS SIDE BY SIDE BLOCK 1: MAXIMUM 6 PALLETS AT A TIME PER CHANNEL BLOCKS 2-4: 5 PALLETS AT A TIME PER CHANNEL COMPARTMENT HEIGHT: 2,100 MM TRAY LOAD:-BLOCK 01 = 6,000 KG -BLOCK 02 - 04 = 5,000 KG FIELD LOAD:-BLOCK 01 = 48,000 KG BLOCK 02 - 04 = 40,000 KG STACKER CRANES: 2 CONTOUR CONTROL: 1 WAREHOUSE MANAGEMENT SYSTEM: SAVANNA YEAR 2016 BREAKDOWN: 4 SHELF BLOCKS, 8 LEVELS CARGO: PALLETS 800 X 1,200 MM MAX. 1,000 X 1,380 MM HEIGHT OF PALLET INCL. PALLET OF TO 1,700 MM OF MAXIMUM 1,100 KG PALLET WEIGHT PALLET SECURING: FOIL POWER CONNECTION: 65 KW THE SHELVING SYSTEM IS A SATELLITE SHELVING. THE CHANNEL STORAGE TECHNOLOGY IS PARTICULARLY SUITABLE FOR HIGH LEVELS OF INDIVIDUAL ARTICLES WITHIN LESS PRODUCT GROUPS. IN A CHANNEL BEARING SEVERAL LOADING UNITS ARE POSITIONED IN A ROW IN SO-CALLED CHANNELS ON RAILS AND USING SPECIAL CONVEYOR TECHNOLOGY AND OUTSOURCED. THE ADVANTAGE IS IN COMPARISON TO A CONVENTIONAL HIGH BAY WAREHOUSING, IN THE HIGHER SPACE. THE SATELLITE WAREHOUSE HAS STORAGE CHANNELS, WHERE THE CHARGERS MULTIPLE DEEP ARE DEPOSITED. THE DISPLACEMENT IS ACHIEVED ACCORDING TO THE LIFO PRINCIPLE. WITH A RAIL-GUIDED REGALF&ATILDE;&PARA;RDERZEUG IS ACCESSED ON THE BEARING CHANNELS. THE REGALF&ATILDE;&PARA;RDERZEUG IS FIRMLY ANCHORED IN A WAREHOUSE ALLEY. IN THE REGALF&ATILDE;&PARA;RDERZEUG, A SO-CALLED SATELLITE IS INSTALLED INSTEAD OF A TELESCOPIC FORK. THE SHUTTLE IS AN AUTONOMOUS VEHICLE WITH VERY LOW HEIGHT. THE VEHICLE AFTER REACHING THE X AND Z COORDINATES OF THE STORAGE COMPARTMENT, DETACHES FROM THE REGALF&ATILDE;&PARA;RDERZEUG AND MOVES INTO THE SHELF. IT IS EQUIPPED WITH A LIFTING DEVICE AND CAN INDEPENDENTLY ON THE CHARGERS - AND UNLOAD. THE CROSSBAR OF THE RACK WAREHOUSE HAVE TWO HORIZONTAL SURFACES: THE UPPER SURFACE IS THE SURFACE OF THE CHARGER AND THE LOWER SURFACE IS USED AS A SURFACE FOR THE SHUTTLE. ADVANTAGES OF SATELLITE SHELVING ARE THE COMPACT, SPACE-SAVING STORAGE, AUTOMATION AND DIRECT ACCESS. CONDITION: GOOD - END 2018 STILL IN OPERATION CAN BE DONE IN AVAILABLE: AVAILABLE NOW LOCATION: NRW (SPACE NEUSS) CARGO: PALLETS ACCORDING TO DIN 15146 TL. 2 PALLET HEIGHT 1700 MM HD. RANGE WEIGHT MIN. 80 KG - MAX. 1100 KG AVERAGE WEIGHT MAX. 1000 KG PACK SECURITY: THE TRANSPORTED MATERIAL IS GENERALLY WRAPPED WITH FOIL. PALLETS FROM OUTSIDE OR REST PALLETS ARE ALSO WOUND ON 'EMERGENCY STOP' THE VALUE OF G CAN &GT; 0.8 M / SEC2 TEMPERATURE: OPERATING ROOM TEMPERATURE +5-+40 &ACIRC;&DEG; C RELATIVE HUMIDITY: <75% RELATIVE="" LUFTFEUCHTIGKEIT="" GESCHWINDIGKEITEN:="" RFZ-HORIZONTAL="" VMAX="200" M/MIN="" RFZ-VERTIKAL="" V="" MAX="90" M/MIN="" RFZ-SATELLIT="" V="" MAX="83" M/MIN="" F&ATILDE;&PARA;RDERER-HORIZONTAL="" V="" MAX="15" M/MIN="" QUERTRANSPORTWAGEN="" (30.10)="" V="" MAX="100" M/MIN="" QUERTRANSPORTWAGEN="" (20.17)="" V="" MAX="27" M/MIN="" QUERTRANSPORTWAGEN="" (30.05)="" V="" MAX="160" M/MIN="" ELEKTRISCHE="" VERSORGUNG:="" DREHSTROM="" 400="" V;="" 50="" HZ="" (3X="" PH,="" 1X="" PE,="" 1X="" N)="" STROMANSCHLU&ATILDE;?:="" REGALFAHRZEUG="JE" 100="" AMP="" NENNSTROM="" F&ATILDE;&PARA;RDERTECHNIK="65" KW="" SUMMIERTE="" NENNLEISTUNG="">1 SUPPLY POINT SITE GLEICHZEITFAKFOR = 1 J AIR REQUIREMENT: APPROX. 980 L/MIN MIN 6 BAR DRY SURFACE: CONVEYING SYSTEMS RAL 7001 PEARL GREY GALVANIZED BASE CONSTRUCTIONS REGALF&ATILDE;&PARA;RDERZEUG RAL 3004 PURPLE RED ROLL COAT GALVANIZED SAFETY FENCING GALVANIZED (WST-STANDARD) FLOOR: FLATNESS TOLERANCES ACCORDING TO FEM 9.831 STANDARD UP TO 150 MM DEEP D&ATILDE;&FRAC14;BELBAR. LOAD MAX. 500 N/CM2 SURFACE LOAD CONVEYOR UNDERFOOT. ON-SITE SERVICES: 1, E-CONNECTIONS AT THE DESIGNATED CABINET </75%>
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Precio: 250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 895 €
Ubicación: Land-belt width: 75 mm
belt length: 2000 mm
sanding belt dimensions: 75 x 2000 mm
snatch: 200 x 75 mm
plan grinding area: 590 x 75 mm
belt speed: 15 / 30 mtr. / sec.
working height: 600-1200 mm
total power consumption: 2.4 / 3.0 kw / 400 v
machine weight: 130 kg
machine dimensions: 1150 x 650 x 670 mm

facilities / features

vibration-free running
quick adjustment for horizontal + vertical position
continuous plan grinding surface by simply opening of the cover
quick-clamping belt
passing pole-reversible motor
quick belt change
incl. factory warranty

all technical data are created according to our best knowledge and existing documents; expressly reserved by mistake.
each party has the opportunity to test the machine before purchasing power.
 BELT WIDTH: 75 MM BELT LENGTH: 2000 MM SANDING BELT DIMENSIONS: 75 X 2000 MM SNATCH: 200 X 75 MM PLAN GRINDING AREA: 590 X 75 MM BELT SPEED: 15 / 30 MTR. / SEC. WORKING HEIGHT: 600-1200 MM TOTAL POWER CONSUMPTION: 2.4 / 3.0 KW / 400 V MACHINE WEIGHT: 130 KG MACHINE DIMENSIONS: 1150 X 650 X 670 MM FACILITIES / FEATURES VIBRATION-FREE RUNNING QUICK ADJUSTMENT FOR HORIZONTAL + VERTICAL POSITION CONTINUOUS PLAN GRINDING SURFACE BY SIMPLY OPENING OF THE COVER QUICK-CLAMPING BELT PASSING POLE-REVERSIBLE MOTOR QUICK BELT CHANGE INCL. FACTORY WARRANTY ALL TECHNICAL DATA ARE CREATED ACCORDING TO OUR BEST KNOWLEDGE AND EXISTING DOCUMENTS; EXPRESSLY RESERVED BY MISTAKE. EACH PARTY HAS THE OPPORTUNITY TO TEST THE MACHINE BEFORE PURCHASING POWER.
Vendedor: Czech Industrie Service
Año de construcción: usado
Precio: 60 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 650.000 €
Ubicación: Land-line is not in the us..

complete krones pet water filling lineline in productionbrand name : kronesyear : 2007-2006 ,  capacity is  36,000bhp. krones  2007key assetkrones blowing machine air conditionerhandheld thermal imager krones blowing machineair compressorblowing machine coveyerkrones 550ml mouldingkrones600ml moulding krones coveyer  krones filling machine krones labeller film wrapping machinewater treatment line.air compressor weigh checking jet ink printer cip system coveyer dryer beltliquid nitrogen machine  krones water level check packing machine  krones filterlable checker  krones control cabinet krones full automatic sprinkling device laser marker led counterkrones scale  krones vernier caliper  for the krones water line, 36,000bph, built in 2007, still running. any questions, please let me know.      LINE IS NOT IN THE US.. COMPLETE KRONES PET WATER FILLING LINELINE IN PRODUCTIONBRAND NAME : KRONESYEAR : 2007-2006 , CAPACITY IS 36,000BHP. KRONES 2007KEY ASSETKRONES BLOWING MACHINE AIR CONDITIONERHANDHELD THERMAL IMAGER KRONES BLOWING MACHINEAIR COMPRESSORBLOWING MACHINE COVEYERKRONES 550ML MOULDINGKRONES600ML MOULDING KRONES COVEYER KRONES FILLING MACHINE KRONES LABELLER FILM WRAPPING MACHINEWATER TREATMENT LINE.AIR COMPRESSOR WEIGH CHECKING JET INK PRINTER CIP SYSTEM COVEYER DRYER BELTLIQUID NITROGEN MACHINE KRONES WATER LEVEL CHECK PACKING MACHINE KRONES FILTERLABLE CHECKER KRONES CONTROL CABINET KRONES FULL AUTOMATIC SPRINKLING DEVICE LASER MARKER LED COUNTERKRONES SCALE KRONES VERNIER CALIPER FOR THE KRONES WATER LINE, 36,000BPH, BUILT IN 2007, STILL RUNNING. ANY QUESTIONS, PLEASE LET ME KNOW. Completa KRONES PET agua llenado LineLine en productionBrand nombre: KRONESYear: 2007-2006Capacity es 36, 36 de Krones 000bhp, 000BPH 2007Key AssetKrones soplado máquina aire conditionerHandheld toner termal Krones soplar MachineAir CompressorBlowing Máquina CoveyerKRONES 550ML MouldingKRONES600ML MouldingKRONES CoveyerKrones relleno MachineKrones Labellerfilm envoltura lineAir CompressorWeigh checkingJet tinta PrinterCIP SystemCoveyerDryerBeltLiquid nitrógeno de machineWater tratamiento machineKRONES nivel de agua checkPacking machineKRONES Filterlable checkerKrones control cabinetKRONES completo aspersión automático dispositivo láser MarkerLED Counterkrones scaleKRONES pie de rey para el agua línea Krones, 36, 000BPH, construido en 2007, todavía en funcionamiento. Cualquier pregunta, por favor hágamelo saber.
Vendedor: Ozbek Machinery Trade

Envasadoras y máquinas cerradoras more

Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-gebr. container turning device (roll bock turning) make gsd. no. 29 year 2005max. belastung30 tomax. hypertrophy mitlã¤ufer60 torollen-ã?415 mmrollenbreite gesamt500 mmwerkstã¼ck-ã?1000 - 7000 mmdrehgeschwindigkeit0 - 1.3 upm2 piece roller drive motors je3, 5 kwanschluss400 vauã?enmaã?e: breite3900 mmtiefe2000 mmhã¶he1100 mm ca. 4600 kgmitlã¤ufereinheit: roller ã?415 mmrollenbreite gesamt500 mmmax. belastung30 toauã?enmaã?e: breite3500 mmtiefe1600 mmhã¶he1100 mm ca. 2500-kgmit remote control  GEBR. CONTAINER TURNING DEVICE (ROLL BOCK TURNING) MAKE GSD. NO. 29 YEAR 2005MAX. BELASTUNG30 TOMAX. HYPERTROPHY MITL&ATILDE;&CURREN;UFER60 TOROLLEN-&ATILDE;?415 MMROLLENBREITE GESAMT500 MMWERKST&ATILDE;&FRAC14;CK-&ATILDE;?1000 - 7000 MMDREHGESCHWINDIGKEIT0 - 1.3 UPM2 PIECE ROLLER DRIVE MOTORS JE3, 5 KWANSCHLUSS400 VAU&ATILDE;?ENMA&ATILDE;?E: BREITE3900 MMTIEFE2000 MMH&ATILDE;&PARA;HE1100 MM CA. 4600 KGMITL&ATILDE;&CURREN;UFEREINHEIT: ROLLER &ATILDE;?415 MMROLLENBREITE GESAMT500 MMMAX. BELASTUNG30 TOAU&ATILDE;?ENMA&ATILDE;?E: BREITE3500 MMTIEFE1600 MMH&ATILDE;&PARA;HE1100 MM CA. 2500-KGMIT REMOTE CONTROL
Vendedor: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

working surface of 2.000 x 4.000 mm
with automatic changing table
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
1000 w of fibercut
(fiber lasers from 500 w to 10,000 w available)
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard  H&ATILDE;&CURREN;RTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORKING SURFACE OF 2.000 X 4.000 MM WITH AUTOMATIC CHANGING TABLE TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M &ACIRC;&SUP2; MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 1000 W OF FIBERCUT (FIBER LASERS FROM 500 W TO 10,000 W AVAILABLE) FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Precio: 320 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

working area 1,000 x 2,000 mm
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
1000 w of fibercut
(fiber lasers from 500 w to 10,000 w available)
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard  H&ATILDE;&CURREN;RTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORKING AREA 1,000 X 2,000 MM TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M &ACIRC;&SUP2; MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 1000 W OF FIBERCUT (FIBER LASERS FROM 500 W TO 10,000 W AVAILABLE) FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-weight approx.: 12950 kg<br/>dimensions (l x w x h) approx.: 2210 x 3640 x 2885 mm<br/>description: - serial number.: 885446<br> - operating hours: 79700 h<br> - pressure force: 1300 kn<br> - bending length: 3060 mm<br> - installation height: 535 mm<br> - stroke: 365 mm<br> - distance between uprights: 2690 mm<br> - upright outreach: 410 mm<br> - table height: 1050 mm<br> - table width: 120 mm<br> - connected load: 23 kva<br> - oil contents: 250 l<br> - rapid traverse: 200 mm/s<br> - working speed: 1-10 mm/s<br> - withdrawal speed: 135 mm/s<br> - speed x-axis: 500 mm/s<br> - speed r-axis: 300 mm/s<br> - speed z-axis: 1000 mm/s<br> - positioning accuracy y-axis: 0.01 mm<br> - positioining accuracy x-axis: 0.04 mm<br> - positioning accuracy r-axis: 0,08 mm<br> - positioniergenauigkeit z-axis: 0,06 mm<br> - travel x-axis: 600 mm<br> - travel r-axis: 250 mm<br> - travel z-axis: 2310 mm<br> - inclination: +/- 10 mm<br> <br> accessories:<br> control delem da 65t cnc<br> 4 axes backgauge<br> bend guard<br> support console<br> wila tool clamping on top and at the bottom<br> lazer safe<br> safety doors<br> crowning motor-driven<br> die movement pneumatic<br> bending aid available<br> WEIGHT APPROX.: 12950 KG
DIMENSIONS (L X W X H) APPROX.: 2210 X 3640 X 2885 MM
DESCRIPTION: - SERIAL NUMBER.: 885446
- OPERATING HOURS: 79700 H
- PRESSURE FORCE: 1300 KN
- BENDING LENGTH: 3060 MM
- INSTALLATION HEIGHT: 535 MM
- STROKE: 365 MM
- DISTANCE BETWEEN UPRIGHTS: 2690 MM
- UPRIGHT OUTREACH: 410 MM
- TABLE HEIGHT: 1050 MM
- TABLE WIDTH: 120 MM
- CONNECTED LOAD: 23 KVA
- OIL CONTENTS: 250 L
- RAPID TRAVERSE: 200 MM/S
- WORKING SPEED: 1-10 MM/S
- WITHDRAWAL SPEED: 135 MM/S
- SPEED X-AXIS: 500 MM/S
- SPEED R-AXIS: 300 MM/S
- SPEED Z-AXIS: 1000 MM/S
- POSITIONING ACCURACY Y-AXIS: 0.01 MM
- POSITIOINING ACCURACY X-AXIS: 0.04 MM
- POSITIONING ACCURACY R-AXIS: 0,08 MM
- POSITIONIERGENAUIGKEIT Z-AXIS: 0,06 MM
- TRAVEL X-AXIS: 600 MM
- TRAVEL R-AXIS: 250 MM
- TRAVEL Z-AXIS: 2310 MM
- INCLINATION: +/- 10 MM

ACCESSORIES:
CONTROL DELEM DA 65T CNC
4 AXES BACKGAUGE
BEND GUARD
SUPPORT CONSOLE
WILA TOOL CLAMPING ON TOP AND AT THE BOTTOM
LAZER SAFE
SAFETY DOORS
CROWNING MOTOR-DRIVEN
DIE MOVEMENT PNEUMATIC
BENDING AID AVAILABLE
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-cut laser 2000 w to the laser fiber. with housing. twin table 1,500 x 3,000 mm. 

hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

work area 3.000 x 1.500 mm
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
2000 w of fibercut
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard CUT LASER 2000 W TO THE LASER FIBER. WITH HOUSING. TWIN TABLE 1,500 X 3,000 MM. H&ATILDE;&CURREN;RTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORK AREA 3.000 X 1.500 MM TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M &ACIRC;&SUP2; MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 2000 W OF FIBERCUT FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-weight approx.: 350 kg<br/>dimensions (l x w x h) approx.: 1100 x 1100 x 2000 mm<br/>description: serial number 28128, has 2 clamping plates with the following dimensions: 500 x 300 mm and 350 x 200 mm, voltage 380 v, cutting and milling speeds WEIGHT APPROX.: 350 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 1100 X 2000 MM
DESCRIPTION: SERIAL NUMBER 28128, HAS 2 CLAMPING PLATES WITH THE FOLLOWING DIMENSIONS: 500 X 300 MM AND 350 X 200 MM, VOLTAGE 380 V, CUTTING AND MILLING SPEEDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-installation of stationary
rugged steel construction
easy cleaning
running-in direction of the vats from the side
large tilt angle
tragfã¤chigkeit max 1000 kg
vat is 150 + 200 a boiler for kemper f INSTALLATION OF STATIONARY RUGGED STEEL CONSTRUCTION EASY CLEANING RUNNING-IN DIRECTION OF THE VATS FROM THE SIDE LARGE TILT ANGLE TRAGF&ATILDE;&CURREN;CHIGKEIT MAX 1000 KG VAT IS 150 + 200 A BOILER FOR KEMPER F
Vendedor: Güzel Taceddin
Año de construcción: usado
Ubicación: Land-cnc bearbeitungszentrum mit roboter\r\n\r\nbeschickung\r\nabb roboter \r\ntyp: irb 6400/3,0-75 m98 s4c\r\nbaujahr 1999\r\n\r\nbelastung bis max. 30kg + greifer (saugbalken)\r\n- steuerung s4c \r\n- tragkraft 70 kg \r\n- arbeitsradius ca. 2800 mm \r\n- mit handbediengerät\r\naufgebaut auf fahrbahn: länge 6m\r\nroboter vermisst den teil auf paket um ihn korrekt zu den anschlägen zu legen\r\n\r\ncnc bearbeitungszentrum\r\nfabrikat: homag\r\ntyp: baz/32/30/g\r\n\r\nmax. bearbeitungslänge: 3000mm\r\nmax. bearbeitungsbreite: 1200mm\r\nbohrkopf: 11 bohrspindeln in x-achse, 7 bohrspindeln  in y-achse\r\n\r\n1 fräsmotor 12 kw 18000 u/min für hsk aufnahmen\r\n12 fach werkzeugwechsler (teller)\r\n\r\nfest angebautes verleimaggregat mit eigener y-achse\r\nkantenstärke von 0,3 bis 3mm; kantenbreite bis 55mm\r\n3 fach-kantenmagazine\r\n\r\nc-achse mit pneumatikanschlüssen\r\nsägeaggregate\r\nmehrere nachbearbeitungsaggregate\r\n7 spindler (raster 25mm)\r\n4 spindler horizontalbohraggregat\r\n\r\nabstapelung\r\nroboter nimmt den fertigen teil von der maschine und legt ihn stehen auf einem förderband ab!\r\n\r\n\r\nhinweis:\r\ndie technischen daten und beschreibungen sind abschrift der damaligen auftragsbestätigung. daten dienen zur information und sind nicht verbindlich.\r\n CNC BEARBEITUNGSZENTRUM MIT ROBOTER\R\N\R\NBESCHICKUNG\R\NABB ROBOTER \R\NTYP: IRB 6400/3,0-75 M98 S4C\R\NBAUJAHR 1999\R\N\R\NBELASTUNG BIS MAX. 30KG + GREIFER (SAUGBALKEN)\R\N- STEUERUNG S4C \R\N- TRAGKRAFT 70 KG \R\N- ARBEITSRADIUS CA. 2800 MM \R\N- MIT HANDBEDIENGERäT\R\NAUFGEBAUT AUF FAHRBAHN: LäNGE 6M\R\NROBOTER VERMISST DEN TEIL AUF PAKET UM IHN KORREKT ZU DEN ANSCHLäGEN ZU LEGEN\R\N\R\NCNC BEARBEITUNGSZENTRUM\R\NFABRIKAT: HOMAG\R\NTYP: BAZ/32/30/G\R\N\R\NMAX. BEARBEITUNGSLäNGE: 3000MM\R\NMAX. BEARBEITUNGSBREITE: 1200MM\R\NBOHRKOPF: 11 BOHRSPINDELN IN X-ACHSE, 7 BOHRSPINDELN IN Y-ACHSE\R\N\R\N1 FRäSMOTOR 12 KW 18000 U/MIN FüR HSK AUFNAHMEN\R\N12 FACH WERKZEUGWECHSLER (TELLER)\R\N\R\NFEST ANGEBAUTES VERLEIMAGGREGAT MIT EIGENER Y-ACHSE\R\NKANTENSTäRKE VON 0,3 BIS 3MM; KANTENBREITE BIS 55MM\R\N3 FACH-KANTENMAGAZINE\R\N\R\NC-ACHSE MIT PNEUMATIKANSCHLüSSEN\R\NSäGEAGGREGATE\R\NMEHRERE NACHBEARBEITUNGSAGGREGATE\R\N7 SPINDLER (RASTER 25MM)\R\N4 SPINDLER HORIZONTALBOHRAGGREGAT\R\N\R\NABSTAPELUNG\R\NROBOTER NIMMT DEN FERTIGEN TEIL VON DER MASCHINE UND LEGT IHN STEHEN AUF EINEM FöRDERBAND AB!\R\N\R\N\R\NHINWEIS:\R\NDIE TECHNISCHEN DATEN UND BESCHREIBUNGEN SIND ABSCHRIFT DER DAMALIGEN AUFTRAGSBESTäTIGUNG. DATEN DIENEN ZUR INFORMATION UND SIND NICHT VERBINDLICH.\R\N
Vendedor: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-hd/ lld/pe film extruder line




extruder quantity: 13sets

make:korea

manufacturing year:2015





1. ?45mm hd pe film extruder x2 sets

make:sungkwang(korea)

manufacturing year:2015

hd pe film 

screw : ?45mm 

main motor: 25hp 

heater: 4zone


dice : 60mm 

airing: 100mm 

fan blower: 380v 1hp 

drawing machine : 900×3000mm

automatic hopper : 1hp 

2)hopper loader 3hp

3)printing machine: 1color

roller length : 1000mm 

speed : 750rpm 





2. ?50mm hd pe film extruder x2 sets

make:sungkwang(korea)

manufacturing year:2015

main motor: 25hp

heater: 5one

dice : 70mm 

airing: 110mm 

fan blower: 380v 1hp 

drawing machine : 1200×3200mm 

automatic hopper : 1hp 

2)hopper loader 3hp 

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm 




3. ?80mm wd pe film extruder x1 sets

make:sungkwang(korea)

manufacturing year:2015

wd pe film

screw : ?80mm 

main motr : 50hp 

heater : 8zone

dice : 500mm 

airing: 800mm

fan blower : 380v 5hp

drawing machine : 2700×6500mm 





4. ?50mm hd pe film extruder x3 sets

make:sungjin(korea)

manufacturing year:2015

screw: ?50mm

main motor : 25hp

heater: 10.9kw

fan blower: 380v 2hp

dimension : 3800×1950×3200mm

 cap : 30kg/hr 

2)hopper loader 3hp 

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm





5. ?55mm hd pe film extruder x2 sets

make:sungjin(korea)

manufacturing year:2015

screw: ?50mm

main motor : 25hp

heater: 10.9kw

fan blower: 380v 2hp

dimension : 2900×4200×4000mm

 cap : 45kg/hr 

2)hopper loader 3hp 

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm





6. ?60mm hd pe film extruder x1 sets

make:sungjin(korea)

manufacturing year:2015

screw: ?50mm

main motor : 30hp

heater: 4.5kw

fan blower: 380v 2hp

dimension : 4000×5200×4500mm

 cap : 60kg/hr 

2)hopper loader 3hp

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm





7. ?55mm lld pe film extruder x1 sets

make:sungjin(korea)

manufacturing year:2015

screw: ?50mm

main motor : 30hp

heater: 14.5kw

fan blower: 380v 2hp

dimension : 3800×1950×3200mm

 cap : 45kg/hr 

2)hopper loader 3hp

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm





8. ?80mm lld pe film extruder x1 sets

make:sungjin(korea)

manufacturing year:2015

screw: ?80mm

main motor : 30hp

heater: 14.5kw

fan blower: 380v 2hp

dimension : 4300×2650×4500mm

 cap : 60kg/hr 

2)hopper loader 3hp

3)printing machine:1color

roller length : 1000mm 

speed : 1750rpm





9. mixer 

make:sungjin(korea)

manufacturing year:2015

cap : 1ton 

motor : 15hp





10. bagmaster300sp x1set

make:taejin(korea)

manufacturing year:2015

type : 1300mm





11.rollmaster500at(automatic roll bag machine) x2sets

make:taejin(korea)

manufacturing year:2015

type : 500mm 

product width : 400mm

product length : 500mm 

main motor: 2hp (inverter control system) 

sealing heater vertical cam type : 500mm 

speed: 120~140/min





12.bagmaster200ah x3sets

(double row automatic punching machine)

 make:taejin(korea)

manufacturing year:2015

type:1000mm

frame:700mm 

material:2- row automatic

main motor:2hp(inverter control system)

guide roller:1000mm

automatic punching system(motor)





13.bagmaster600a x1set

(2 step automatic punching machine)

make:taejin(korea)

manufacturing year:2015

type:1300mm

frame:700mm 

material:1,2,3 row automatic

2step

main motor:3hp(inverter control system)

guide roller:1300mm

automatic punching system(motor):

speed:100punching/min





14.side sealing x1set

make:taejin(korea)

manufacturing year:2015

 type:900mm

rubber roller:700mm 

material size:700mm

product length:400-900mm

speed:50~100cycle





15.gravour printing system 

make:taejin(korea)

manufacturing year:2015

 type:1100mm

material size:600mm-1000mm

speed:110m/min

winder diameter:1000mm

motor:7.hp

electric heater type

electric:30kw/hr





16. bag making m/c

make:taejin(korea)

manufacturing year:2016

model:bagmaster 300sp 

guide roll:1,200mm

 film width:350x3 or, 1,100x1

 film length:1,200mm 

film thickness:0.015~018mm

 kinds of film:hdpe, pe, ldpe

 no. of roll:3 

production:270bags/min 

power required:7kw 





17.thermal transfer printer

 make:domino

 manufacturing year:2016 

 model:v230i(53mm)

 print resolution:300dpi

 max.print area(im):53x55mm

 max.print area(cm):53x500mm

 print speed(max)(im):400mm/s

 speed range(cm):10~750mm/s

 print repeat rate(max):6prints/s 

bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

 HD/ LLD/PE FILM EXTRUDER LINE EXTRUDER QUANTITY: 13SETS MAKE:KOREA MANUFACTURING YEAR:2015 1. ?45MM HD PE FILM EXTRUDER X2 SETS MAKE:SUNGKWANG(KOREA) MANUFACTURING YEAR:2015 HD PE FILM SCREW : ?45MM MAIN MOTOR: 25HP HEATER: 4ZONE DICE : 60MM AIRING: 100MM FAN BLOWER: 380V 1HP DRAWING MACHINE : 900×3000MM AUTOMATIC HOPPER : 1HP 2)HOPPER LOADER 3HP 3)PRINTING MACHINE: 1COLOR ROLLER LENGTH : 1000MM SPEED : 750RPM 2. ?50MM HD PE FILM EXTRUDER X2 SETS MAKE:SUNGKWANG(KOREA) MANUFACTURING YEAR:2015 MAIN MOTOR: 25HP HEATER: 5ONE DICE : 70MM AIRING: 110MM FAN BLOWER: 380V 1HP DRAWING MACHINE : 1200×3200MM AUTOMATIC HOPPER : 1HP 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 3. ?80MM WD PE FILM EXTRUDER X1 SETS MAKE:SUNGKWANG(KOREA) MANUFACTURING YEAR:2015 WD PE FILM SCREW : ?80MM MAIN MOTR : 50HP HEATER : 8ZONE DICE : 500MM AIRING: 800MM FAN BLOWER : 380V 5HP DRAWING MACHINE : 2700×6500MM 4. ?50MM HD PE FILM EXTRUDER X3 SETS MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 SCREW: ?50MM MAIN MOTOR : 25HP HEATER: 10.9KW FAN BLOWER: 380V 2HP DIMENSION : 3800×1950×3200MM CAP : 30KG/HR 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 5. ?55MM HD PE FILM EXTRUDER X2 SETS MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 SCREW: ?50MM MAIN MOTOR : 25HP HEATER: 10.9KW FAN BLOWER: 380V 2HP DIMENSION : 2900×4200×4000MM CAP : 45KG/HR 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 6. ?60MM HD PE FILM EXTRUDER X1 SETS MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 SCREW: ?50MM MAIN MOTOR : 30HP HEATER: 4.5KW FAN BLOWER: 380V 2HP DIMENSION : 4000×5200×4500MM CAP : 60KG/HR 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 7. ?55MM LLD PE FILM EXTRUDER X1 SETS MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 SCREW: ?50MM MAIN MOTOR : 30HP HEATER: 14.5KW FAN BLOWER: 380V 2HP DIMENSION : 3800×1950×3200MM CAP : 45KG/HR 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 8. ?80MM LLD PE FILM EXTRUDER X1 SETS MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 SCREW: ?80MM MAIN MOTOR : 30HP HEATER: 14.5KW FAN BLOWER: 380V 2HP DIMENSION : 4300×2650×4500MM CAP : 60KG/HR 2)HOPPER LOADER 3HP 3)PRINTING MACHINE:1COLOR ROLLER LENGTH : 1000MM SPEED : 1750RPM 9. MIXER MAKE:SUNGJIN(KOREA) MANUFACTURING YEAR:2015 CAP : 1TON MOTOR : 15HP 10. BAGMASTER300SP X1SET MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE : 1300MM 11.ROLLMASTER500AT(AUTOMATIC ROLL BAG MACHINE) X2SETS MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE : 500MM PRODUCT WIDTH : 400MM PRODUCT LENGTH : 500MM MAIN MOTOR: 2HP (INVERTER CONTROL SYSTEM) SEALING HEATER VERTICAL CAM TYPE : 500MM SPEED: 120~140/MIN 12.BAGMASTER200AH X3SETS (DOUBLE ROW AUTOMATIC PUNCHING MACHINE) MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE:1000MM FRAME:700MM MATERIAL:2- ROW AUTOMATIC MAIN MOTOR:2HP(INVERTER CONTROL SYSTEM) GUIDE ROLLER:1000MM AUTOMATIC PUNCHING SYSTEM(MOTOR) 13.BAGMASTER600A X1SET (2 STEP AUTOMATIC PUNCHING MACHINE) MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE:1300MM FRAME:700MM MATERIAL:1,2,3 ROW AUTOMATIC 2STEP MAIN MOTOR:3HP(INVERTER CONTROL SYSTEM) GUIDE ROLLER:1300MM AUTOMATIC PUNCHING SYSTEM(MOTOR): SPEED:100PUNCHING/MIN 14.SIDE SEALING X1SET MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE:900MM RUBBER ROLLER:700MM MATERIAL SIZE:700MM PRODUCT LENGTH:400-900MM SPEED:50~100CYCLE 15.GRAVOUR PRINTING SYSTEM MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2015 TYPE:1100MM MATERIAL SIZE:600MM-1000MM SPEED:110M/MIN WINDER DIAMETER:1000MM MOTOR:7.HP ELECTRIC HEATER TYPE ELECTRIC:30KW/HR 16. BAG MAKING M/C MAKE:TAEJIN(KOREA) MANUFACTURING YEAR:2016 MODEL:BAGMASTER 300SP GUIDE ROLL:1,200MM FILM WIDTH:350X3 OR, 1,100X1 FILM LENGTH:1,200MM FILM THICKNESS:0.015~018MM KINDS OF FILM:HDPE, PE, LDPE NO. OF ROLL:3 PRODUCTION:270BAGS/MIN POWER REQUIRED:7KW 17.THERMAL TRANSFER PRINTER MAKE:DOMINO MANUFACTURING YEAR:2016 MODEL:V230I(53MM) PRINT RESOLUTION:300DPI MAX.PRINT AREA(IM):53X55MM MAX.PRINT AREA(CM):53X500MM PRINT SPEED(MAX)(IM):400MM/S SPEED RANGE(CM):10~750MM/S PRINT REPEAT RATE(MAX):6PRINTS/S BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: 697.500 €
Ubicación: Land-; mileage [km]: 11643; gross weight [kg]: 60000; registration number: wmgkm5082ez4d0202; rear tyres remaining: 100; front tyres remaining: 100; accessories: immediately available!, new terex explorer 5500. (130t), this crane is also available for rent., , manufacturer: terex, typ: explorer 5500, serial nr: 35202, chassis nr: wmgkm5082ez4d0202, machine condition: new, fuel: diesel, loading / lifting capacity: ; lift height[mm]: 6000; maximum lift capacity [kg]: 130000 ; MILEAGE [KM]: 11643; GROSS WEIGHT [KG]: 60000; REGISTRATION NUMBER: WMGKM5082EZ4D0202; REAR TYRES REMAINING: 100; FRONT TYRES REMAINING: 100; ACCESSORIES: IMMEDIATELY AVAILABLE!, NEW TEREX EXPLORER 5500. (130T), THIS CRANE IS ALSO AVAILABLE FOR RENT., , MANUFACTURER: TEREX, TYP: EXPLORER 5500, SERIAL NR: 35202, CHASSIS NR: WMGKM5082EZ4D0202, MACHINE CONDITION: NEW, FUEL: DIESEL, LOADING / LIFTING CAPACITY: ; LIFT HEIGHT[MM]: 6000; MAXIMUM LIFT CAPACITY [KG]: 130000
Vendedor: Pfeifer Heavy Machinery B.V.
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more types: