70 ofertas

Año de construcción: usado
Ubicación: Land-
Vendedor: K & C Machinery Limited
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 160 mm<br/>gear width: 50 mm<br/>max. module: 4 <br/>min. module:  <br/>total power requirement: 30 kw<br/>weight of the machine ca.: 8.500 kg<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 160 MM
GEAR WIDTH: 50 MM
MAX. MODULE: 4
MIN. MODULE:
TOTAL POWER REQUIREMENT: 30 KW
WEIGHT OF THE MACHINE CA.: 8.500 KG
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-gleason pfauter pe 500 cnc hobbing machine
operation hours 29532 

cnc control

larger repairs:

in september 2015 there were problems with the a-axis. a-axis sporadically increased with standstill monitoring. then the drive module of the a-axis was replaced.
in 2013, the cooling unit was replaced.
in 2012, the pressure vessel was swapped according to betrsichv.
technical data:

max. wheel diameter 500mm
gear width 400mm
max. module 12.
diameter of hob 192mm.
max. cutter length 250mm
milling slide travel 200mm
shifting 200mm
milling spindle speed 40-450 rpm
axial feed 1-1500 mm/min
radial feed 1-1500 mm/min
table diameter 450mm
dimensions 5240 x 4350 x 3220mm. GLEASON PFAUTER PE 500 CNC HOBBING MACHINE OPERATION HOURS 29532 CNC CONTROL LARGER REPAIRS: IN SEPTEMBER 2015 THERE WERE PROBLEMS WITH THE A-AXIS. A-AXIS SPORADICALLY INCREASED WITH STANDSTILL MONITORING. THEN THE DRIVE MODULE OF THE A-AXIS WAS REPLACED. IN 2013, THE COOLING UNIT WAS REPLACED. IN 2012, THE PRESSURE VESSEL WAS SWAPPED ACCORDING TO BETRSICHV. TECHNICAL DATA: MAX. WHEEL DIAMETER 500MM GEAR WIDTH 400MM MAX. MODULE 12. DIAMETER OF HOB 192MM. MAX. CUTTER LENGTH 250MM MILLING SLIDE TRAVEL 200MM SHIFTING 200MM MILLING SPINDLE SPEED 40-450 RPM AXIAL FEED 1-1500 MM/MIN RADIAL FEED 1-1500 MM/MIN TABLE DIAMETER 450MM DIMENSIONS 5240 X 4350 X 3220MM.
Vendedor: Asset-Trade - Bewertung & Vermarktung
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 2800 kg<br/>dimensions (l x w x h) approx.: 2000 x 2100 x 2000 mm<br/>description: maximum gear diameter 266 mm. maximum pinion diameter 152 mm. main motor power 5 cv WEIGHT APPROX.: 2800 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 2100 X 2000 MM
DESCRIPTION: MAXIMUM GEAR DIAMETER 266 MM. MAXIMUM PINION DIAMETER 152 MM. MAIN MOTOR POWER 5 CV
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-project no.: 904621<br/>  kind of machine: hobbing machines<br/>  <br/>  amount: 1<br/>  manufacturer: pfauter (gleason)<br/>  type: pe 150<br/>  <br/>  control: siemens sinumerik system 3<br/>  year of manufacture: 1986<br/>  location: germany<br/>  machine under power: yes<br/>  availability: on short call<br/>  delivery terms: exw (at machine location) acc. to incoterms 2010<br/>  limitation of liability of defects: no<br/>  <br/>  description:<br/>  the machine is in a good working condition.<br/>  equipment dust extraction unit, machine housing (full), lamp (in working area), opposing column, coolant unit, tailstock, swarf conveyor, loop-type<br/>  workpiece conveyor<br/>  <br/>  technical data:<br/>  module, max.: 3<br/>  working diameter, max.: 150 [mm]<br/>  working length, max.: 150 [mm]<br/>  power requirement: 50 [kw]<br/>  abmessungen (lxbxh): 6300x3750x2900 [mm]<br/>  weight: 8100 [kg]<br/>  tool dimensions (Øoxw), max.: 130x220 [mm]<br/>  distance tool-/workpiece axis: 10-160 [mm]<br/>  <br/>  any information or data concerning machine accuracy are related to new machines. these data may vary due to the used condition of the machine.<br/>  <br/>  the equipment as well as the technical data described above might be inaccurate or incorrect and is subject to change. the offer is subject to prior sale. PROJECT NO.: 904621
KIND OF MACHINE: HOBBING MACHINES

AMOUNT: 1
MANUFACTURER: PFAUTER (GLEASON)
TYPE: PE 150

CONTROL: SIEMENS SINUMERIK SYSTEM 3
YEAR OF MANUFACTURE: 1986
LOCATION: GERMANY
MACHINE UNDER POWER: YES
AVAILABILITY: ON SHORT CALL
DELIVERY TERMS: EXW (AT MACHINE LOCATION) ACC. TO INCOTERMS 2010
LIMITATION OF LIABILITY OF DEFECTS: NO

DESCRIPTION:
THE MACHINE IS IN A GOOD WORKING CONDITION.
EQUIPMENT DUST EXTRACTION UNIT, MACHINE HOUSING (FULL), LAMP (IN WORKING AREA), OPPOSING COLUMN, COOLANT UNIT, TAILSTOCK, SWARF CONVEYOR, LOOP-TYPE
WORKPIECE CONVEYOR

TECHNICAL DATA:
MODULE, MAX.: 3
WORKING DIAMETER, MAX.: 150 [MM]
WORKING LENGTH, MAX.: 150 [MM]
POWER REQUIREMENT: 50 [KW]
ABMESSUNGEN (LXBXH): 6300X3750X2900 [MM]
WEIGHT: 8100 [KG]
TOOL DIMENSIONS (ØOXW), MAX.: 130X220 [MM]
DISTANCE TOOL-/WORKPIECE AXIS: 10-160 [MM]

ANY INFORMATION OR DATA CONCERNING MACHINE ACCURACY ARE RELATED TO NEW MACHINES. THESE DATA MAY VARY DUE TO THE USED CONDITION OF THE MACHINE.

THE EQUIPMENT AS WELL AS THE TECHNICAL DATA DESCRIBED ABOVE MIGHT BE INACCURATE OR INCORRECT AND IS SUBJECT TO CHANGE. THE OFFER IS SUBJECT TO PRIOR SALE.
Vendedor: Wolfgang Finken GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 7.500 €
Ubicación: Land-weight approx.: 4083 kg<br/>dimensions (l x w x h) approx.: 2400 x 1400 x 1530 mm<br/>description: diameter of cutter min/max 152-304 mm. revacycle cutters min/max 406-457 mm. coniflex cutters min/max 229-381 mm. wheel size 12?x¼-4?. wheel drive motor  2 cv WEIGHT APPROX.: 4083 KG
DIMENSIONS (L X W X H) APPROX.: 2400 X 1400 X 1530 MM
DESCRIPTION: DIAMETER OF CUTTER MIN/MAX 152-304 MM. REVACYCLE CUTTERS MIN/MAX 406-457 MM. CONIFLEX CUTTERS MIN/MAX 229-381 MM. WHEEL SIZE 12?X¼-4?. WHEEL DRIVE MOTOR 2 CV
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-pitch cycle diameter: 180mm max., tool width: 52mm, workpiece diameter: 280mm, module: 5mm max., stroke: 60mm, number of strokes: 125-1250/min, spindle table distance: 335mm, number of teeth: 200, length: 4500mm, width: 2500mm, height: 2700mm, weight: 7.5t, was overhauled in 2001, including various milling heads pfauter and gleason.  PITCH CYCLE DIAMETER: 180MM MAX., TOOL WIDTH: 52MM, WORKPIECE DIAMETER: 280MM, MODULE: 5MM MAX., STROKE: 60MM, NUMBER OF STROKES: 125-1250/MIN, SPINDLE TABLE DISTANCE: 335MM, NUMBER OF TEETH: 200, LENGTH: 4500MM, WIDTH: 2500MM, HEIGHT: 2700MM, WEIGHT: 7.5T, WAS OVERHAULED IN 2001, INCLUDING VARIOUS MILLING HEADS PFAUTER AND GLEASON.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 2565 kg<br/>dimensions (l x w x h) approx.: 2000 x 1900 x 1600 mm<br/>description: max distance between axis 305 mm. min distance between axis 152 mm. max diameter of the gear rim 457 mm WEIGHT APPROX.: 2565 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1900 X 1600 MM
DESCRIPTION: MAX DISTANCE BETWEEN AXIS 305 MM. MIN DISTANCE BETWEEN AXIS 152 MM. MAX DIAMETER OF THE GEAR RIM 457 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: B.M. MACCHINE UTENSILI srl
Año de construcción: usado
Precio: used machinery auction RESALE 1.000 €
Ubicación: Land-weight approx.: 3500 kg<br/>dimensions (l x w x h) approx.: 700 x 1000 x 1500 mm<br/>description: - WEIGHT APPROX.: 3500 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 1000 X 1500 MM
DESCRIPTION: -
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 4.500 €
Ubicación: Land-gear deburring machine gleason-hurth zea 4

control: cnc siemens simatic op7
wheel diameter - max.    250 mm
wheel width 400 mm
module - max.    8
module - min.    0.5
space requirement approx.    2.0 x 3.3 x 2.2 m
to chamfer width - 1.2 mm
removing tailstock machine centre 280 mm
tool diameter - 140-180, 180-210 mm
tool speed - 132 rev/min GEAR DEBURRING MACHINE GLEASON-HURTH ZEA 4 CONTROL: CNC SIEMENS SIMATIC OP7 WHEEL DIAMETER - MAX. 250 MM WHEEL WIDTH 400 MM MODULE - MAX. 8 MODULE - MIN. 0.5 SPACE REQUIREMENT APPROX. 2.0 X 3.3 X 2.2 M TO CHAMFER WIDTH - 1.2 MM REMOVING TAILSTOCK MACHINE CENTRE 280 MM TOOL DIAMETER - 140-180, 180-210 MM TOOL SPEED - 132 REV/MIN
Vendedor: Maschinenhandel Neubrandenburg
Año de construcción: usado
Precio: used machinery auction RESALE 2.000 €
Ubicación: Land-weight approx.: 2565 kg<br/>dimensions (l x w x h) approx.: 1400 x 1800 x 1900 mm<br/>description: max distance from centre of gear spindle to nose of pinion spindle 305 mm. max diameter pinion spindle 457 mm. min distance from centre of gear spindle to nose of pinion spindle 152 mm WEIGHT APPROX.: 2565 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1800 X 1900 MM
DESCRIPTION: MAX DISTANCE FROM CENTRE OF GEAR SPINDLE TO NOSE OF PINION SPINDLE 305 MM. MAX DIAMETER PINION SPINDLE 457 MM. MIN DISTANCE FROM CENTRE OF GEAR SPINDLE TO NOSE OF PINION SPINDLE 152 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 1.500 €
Ubicación: Land-weight approx.: 2565 kg<br/>dimensions (l x w x h) approx.: 1400 x 1700 x 1600 mm<br/>description: maximum distance between axis 305 mm. minimum distance between axis 152 mm. maimum diameter of the crown wheel 457 mm WEIGHT APPROX.: 2565 KG
DIMENSIONS (L X W X H) APPROX.: 1400 X 1700 X 1600 MM
DESCRIPTION: MAXIMUM DISTANCE BETWEEN AXIS 305 MM. MINIMUM DISTANCE BETWEEN AXIS 152 MM. MAIMUM DIAMETER OF THE CROWN WHEEL 457 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-gear dia. 340 
modul max. 7
 GEAR DIA. 340 MODUL MAX. 7
Vendedor: Delivery Tools
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 275 mm<br/>gear width: 58 mm<br/>max. module: 8 <br/>min. module: 0,5 <br/>control: siemens 840 d<br/>max. ratio: 10 : 1 <br/>number of teeth: 5 - 200 <br/>range of tooth size: max. 20 mm<br/>grinding wheel diameter: 63,5 - 190,5 mm<br/>x-travel: 310 mm<br/>y-travel: 350 mm<br/>z-travel: 465 mm<br/>b-axis: -2 bis 90,1 °<br/>total power requirement: 90 kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 275 MM
GEAR WIDTH: 58 MM
MAX. MODULE: 8
MIN. MODULE: 0,5
CONTROL: SIEMENS 840 D
MAX. RATIO: 10 : 1
NUMBER OF TEETH: 5 - 200
RANGE OF TOOTH SIZE: MAX. 20 MM
GRINDING WHEEL DIAMETER: 63,5 - 190,5 MM
X-TRAVEL: 310 MM
Y-TRAVEL: 350 MM
Z-TRAVEL: 465 MM
B-AXIS: -2 BIS 90,1 °
TOTAL POWER REQUIREMENT: 90 KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: 6,10 X 4,40 X 3,30 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: mm<br/>gear width: mm<br/>max. module: <br/>min. module: <br/>total power requirement: kw<br/>weight of the machine ca.: t<br/>dimensions of the machine ca.: m<br/><br/> MAX. WHEEL DIAMETER: MM
GEAR WIDTH: MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M

Vendedor: HD Werkzeugmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 600 mm<br/>gear width: 600 mm<br/>profile depth: 35 mm<br/>pivoting angle: +/- 45 grad<br/>grinding wheel speeds: 600-6000 u/min<br/>dimensions of the machine ca.: 5,1 x 6,5 x 3,7 m<br/>weight: 17 t<br/>feeds x-axis: 10000 mm/min<br/>feeds y-axis: 5000 mm/min<br/>feeds z-axis: 10000 mm/min<br/>table turning speeds: 0 - 14 u/min<br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 600 MM
GEAR WIDTH: 600 MM
PROFILE DEPTH: 35 MM
PIVOTING ANGLE: +/- 45 GRAD
GRINDING WHEEL SPEEDS: 600-6000 U/MIN
DIMENSIONS OF THE MACHINE CA.: 5,1 X 6,5 X 3,7 M
WEIGHT: 17 T
FEEDS X-AXIS: 10000 MM/MIN
FEEDS Y-AXIS: 5000 MM/MIN
FEEDS Z-AXIS: 10000 MM/MIN
TABLE TURNING SPEEDS: 0 - 14 U/MIN





Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
advance roughing  0,18 mm  
cutter Ø min / max  152/304 mm  
feed rate for finishing  0,05 mm  
time for a tooth  5 segundos  
wheel dimensions  304,8 x 22,2 x 101,6 mm  
Ø coniflex min/max  229/381 mm  
Ø revacicle min/max  457/533 mm  
electrical characteristics  
motor power wheel  2 cv  
dimensions and weights  
high  1.670 mm  
long  2.500 mm  
weight  4.100 mm  
width  1.500 mm  
other features  
included accessories  refrigeración, portamuelas  
url youtube  abc://youtu.be/nbzkdwfjvra  
 GENERAL CHARACTERISTICS ADVANCE ROUGHING 0,18 MM CUTTER Ø MIN / MAX 152/304 MM FEED RATE FOR FINISHING 0,05 MM TIME FOR A TOOTH 5 SEGUNDOS WHEEL DIMENSIONS 304,8 X 22,2 X 101,6 MM Ø CONIFLEX MIN/MAX 229/381 MM Ø REVACICLE MIN/MAX 457/533 MM ELECTRICAL CHARACTERISTICS MOTOR POWER WHEEL 2 CV DIMENSIONS AND WEIGHTS HIGH 1.670 MM LONG 2.500 MM WEIGHT 4.100 MM WIDTH 1.500 MM OTHER FEATURES INCLUDED ACCESSORIES REFRIGERACIóN, PORTAMUELAS URL YOUTUBE ABC://YOUTU.BE/NBZKDWFJVRA
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-workpiece diameter: 125 mm<br/>module: 4 <br/>control: siemens 840 <br/>x-axis: 105 mm<br/>y-axis: 40 mm<br/>z-axis: 500 mm<br/>total power requirement: 47 kva<br/>weight of the machine ca.: 5,5 t<br/>dimensions of the machine ca.: 2,6x2,1x3,1 m<br/>with measuring and palletizing system from hörzer & fehrenbach<br/><br/>for pinion (shaft parts)<br/>workpiece diameter: 17-39.5 mm<br/>component height: approx. 6-15 mm<br/>oblique as well as straight toothed<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 125 MM
MODULE: 4
CONTROL: SIEMENS 840
X-AXIS: 105 MM
Y-AXIS: 40 MM
Z-AXIS: 500 MM
TOTAL POWER REQUIREMENT: 47 KVA
WEIGHT OF THE MACHINE CA.: 5,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6X2,1X3,1 M
WITH MEASURING AND PALLETIZING SYSTEM FROM HöRZER & FEHRENBACH

FOR PINION (SHAFT PARTS)
WORKPIECE DIAMETER: 17-39.5 MM
COMPONENT HEIGHT: APPROX. 6-15 MM
OBLIQUE AS WELL AS STRAIGHT TOOTHED




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-workpiece diameter: 125 mm<br/>module: 4 <br/>control: siemens 840 <br/>x-axis: 105 mm<br/>y-axis: 40 mm<br/>z-axis: 500 mm<br/>total power requirement: 47 kva<br/>weight of the machine ca.: 5,5 t<br/>dimensions of the machine ca.: 2,6x2,1x3,1 m<br/>with measuring and palletizing system from hörzer & fehrenbach<br/><br/>for gearwheels (bore receiver)<br/>workpiece diameter: 17-39.5 mm<br/>component height: approx. 6-15 mm<br/>oblique as well as straight toothed<br/><br/><br/><br/><br/> WORKPIECE DIAMETER: 125 MM
MODULE: 4
CONTROL: SIEMENS 840
X-AXIS: 105 MM
Y-AXIS: 40 MM
Z-AXIS: 500 MM
TOTAL POWER REQUIREMENT: 47 KVA
WEIGHT OF THE MACHINE CA.: 5,5 T
DIMENSIONS OF THE MACHINE CA.: 2,6X2,1X3,1 M
WITH MEASURING AND PALLETIZING SYSTEM FROM HöRZER & FEHRENBACH

FOR GEARWHEELS (BORE RECEIVER)
WORKPIECE DIAMETER: 17-39.5 MM
COMPONENT HEIGHT: APPROX. 6-15 MM
OBLIQUE AS WELL AS STRAIGHT TOOTHED




Vendedor: IMZ Maschinen Vertriebs GmbH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1.600 mm<br/>gear width: 600 mm<br/>max. module: 25 <br/>minimal workpiece - internal diameter: 630 mm<br/>control: sinumerik 840 d <br/>x-axis: 650 mm<br/>z-axis: 1.300 mm<br/>rapid traverse x-axis: 3.000 mm/min<br/>rapid traverse z-axis: 4.000 mm/min<br/>swivel angle of the milling head: + / - 15 °<br/>weight of the machine ca.: ca. 34 t<br/>dimensions of the machine ca.: 8,39 x 8,475 x 4,215 m<br/>--- for internal gears only ---<br/><br/>hob- and single cutter dimensions:<br/>max. outside diameter    440 mm<br/>min. tip diameter        310 mm<br/>max. length              90 mm<br/>diameter cutter arbor    90 mm<br/><br/>workpiece table:<br/>external diameter    1.460 mm<br/>bore diameter         500 mm<br/>max. load            200 kn<br/><br/>turning speeds:<br/>tool                18 - 180 r.p.m.<br/>workpiece table     0 - 8 r.p.m.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1.600 MM
GEAR WIDTH: 600 MM
MAX. MODULE: 25
MINIMAL WORKPIECE - INTERNAL DIAMETER: 630 MM
CONTROL: SINUMERIK 840 D
X-AXIS: 650 MM
Z-AXIS: 1.300 MM
RAPID TRAVERSE X-AXIS: 3.000 MM/MIN
RAPID TRAVERSE Z-AXIS: 4.000 MM/MIN
SWIVEL ANGLE OF THE MILLING HEAD: + / - 15 °
WEIGHT OF THE MACHINE CA.: CA. 34 T
DIMENSIONS OF THE MACHINE CA.: 8,39 X 8,475 X 4,215 M
--- FOR INTERNAL GEARS ONLY ---

HOB- AND SINGLE CUTTER DIMENSIONS:
MAX. OUTSIDE DIAMETER 440 MM
MIN. TIP DIAMETER 310 MM
MAX. LENGTH 90 MM
DIAMETER CUTTER ARBOR 90 MM

WORKPIECE TABLE:
EXTERNAL DIAMETER 1.460 MM
BORE DIAMETER 500 MM
MAX. LOAD 200 KN

TURNING SPEEDS:
TOOL 18 - 180 R.P.M.
WORKPIECE TABLE 0 - 8 R.P.M.




Vendedor: Leyendecker & Hollmann GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
axis angle  90º  
gear mounting distance  165 mm.  
pinion mounting distance  150-300 mm.  
spindle socket taper gleason  99,21 mm.  
variable spindle speed  400-2.400 rpm.  
Ø max. the crown  400 mm.  
Ø of through hole  88 mm.  
electrical characteristics  
total power  9 kw.  
dimensions and weights  
high  1.630 mm.  
long  2.618 mm.  
width  1.820 mm.  
 GENERAL CHARACTERISTICS AXIS ANGLE 90º GEAR MOUNTING DISTANCE 165 MM. PINION MOUNTING DISTANCE 150-300 MM. SPINDLE SOCKET TAPER GLEASON 99,21 MM. VARIABLE SPINDLE SPEED 400-2.400 RPM. Ø MAX. THE CROWN 400 MM. Ø OF THROUGH HOLE 88 MM. ELECTRICAL CHARACTERISTICS TOTAL POWER 9 KW. DIMENSIONS AND WEIGHTS HIGH 1.630 MM. LONG 2.618 MM. WIDTH 1.820 MM.
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. workpiece diameter: 440 mm<br/>threading length: 4000 mm<br/>max. module: 12 <br/>min. module: 0,5 <br/>max. wheel diameter: 440 mm<br/>gear width: 4000 mm<br/>no. of teeth to be hobbed: 3 - 300 mm<br/>max. swing diameter: 600 mm<br/>slide cross: axial  =  4000 mm<br/>dist. cutter spindle - workpiece spindle: 50 / 316 mm<br/>diameter of hob: 192 x 220 mm<br/>head swivability: +/- 45 °<br/>taper: morse 5 <br/>shifting: 200 mm<br/>milling drive motor: 22 kw<br/>hob turning speeds: 80 - 340 u/min<br/>electrics - voltage/frequency: 400 / 50 v/hz<br/>control: sinumerik 840 d <br/>total power requirement: 70 kw<br/>weight of the machine ca.: 22 t<br/>dimensions of the machine ca.: 7,5 x 4,0 x 2,3 m<br/>2013 complete rebuilt and modernized with  cnc control siemens sinumerik<br/>840 d (powerline) with electron. handwheel), all axis/spindles are digitally <br/>driven, hob head with tangential slide and automatic swivel and positioning,<br/>infinitely variable hob drive 22kw<br/>coolant, oil mist exhauster, chip conveyor, full covering, index drive - speed<br/>range 0-15rpm, software with failure diagnostic, phone-diagnostic-system, set <br/>of steady rests, standard hobbing software,<br/>ce-certificate per 2006/42 eg  -  12 months factory warranty<br/><br/><br/><br/><br/><br/><br/> MAX. WORKPIECE DIAMETER: 440 MM
THREADING LENGTH: 4000 MM
MAX. MODULE: 12
MIN. MODULE: 0,5
MAX. WHEEL DIAMETER: 440 MM
GEAR WIDTH: 4000 MM
NO. OF TEETH TO BE HOBBED: 3 - 300 MM
MAX. SWING DIAMETER: 600 MM
SLIDE CROSS: AXIAL = 4000 MM
DIST. CUTTER SPINDLE - WORKPIECE SPINDLE: 50 / 316 MM
DIAMETER OF HOB: 192 X 220 MM
HEAD SWIVABILITY: +/- 45 °
TAPER: MORSE 5
SHIFTING: 200 MM
MILLING DRIVE MOTOR: 22 KW
HOB TURNING SPEEDS: 80 - 340 U/MIN
ELECTRICS - VOLTAGE/FREQUENCY: 400 / 50 V/HZ
CONTROL: SINUMERIK 840 D
TOTAL POWER REQUIREMENT: 70 KW
WEIGHT OF THE MACHINE CA.: 22 T
DIMENSIONS OF THE MACHINE CA.: 7,5 X 4,0 X 2,3 M
2013 COMPLETE REBUILT AND MODERNIZED WITH CNC CONTROL SIEMENS SINUMERIK
840 D (POWERLINE) WITH ELECTRON. HANDWHEEL), ALL AXIS/SPINDLES ARE DIGITALLY
DRIVEN, HOB HEAD WITH TANGENTIAL SLIDE AND AUTOMATIC SWIVEL AND POSITIONING,
INFINITELY VARIABLE HOB DRIVE 22KW
COOLANT, OIL MIST EXHAUSTER, CHIP CONVEYOR, FULL COVERING, INDEX DRIVE - SPEED
RANGE 0-15RPM, SOFTWARE WITH FAILURE DIAGNOSTIC, PHONE-DIAGNOSTIC-SYSTEM, SET
OF STEADY RESTS, STANDARD HOBBING SOFTWARE,
CE-CERTIFICATE PER 2006/42 EG - 12 MONTHS FACTORY WARRANTY






Vendedor: Kemmerich Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
gear mounting distance  95 mm  
Ø max. the crown  266 mm.  
Ø maximum pinion  152 mm.  
electrical characteristics  
total power  5,75 cv.  
dimensions and weights  
high  1.820 mm.  
long  1.620 mm.  
weight  3.500 kg.  
width  1.440 mm.  
other features  
included accessories  nº de fabricación/serial number 632507  
url youtube  abc://youtu.be/jhu6qyijae0  
 GENERAL CHARACTERISTICS GEAR MOUNTING DISTANCE 95 MM Ø MAX. THE CROWN 266 MM. Ø MAXIMUM PINION 152 MM. ELECTRICAL CHARACTERISTICS TOTAL POWER 5,75 CV. DIMENSIONS AND WEIGHTS HIGH 1.820 MM. LONG 1.620 MM. WEIGHT 3.500 KG. WIDTH 1.440 MM. OTHER FEATURES INCLUDED ACCESSORIES Nº DE FABRICACIóN/SERIAL NUMBER 632507 URL YOUTUBE ABC://YOUTU.BE/JHU6QYIJAE0
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 275 mm<br/>gear width: 58 mm<br/>max. module:  <br/>min. module:  <br/>control: siemens 840d <br/>number of teeth: 5 - 200 <br/>ratio of transmission: 10:1 <br/>cutter diameter max.: 228 mm<br/>x-axis: 25-350 mm<br/>y-axis: +/- 175 mm<br/>z-axis: 125-600 mm<br/>b-axis: -5 / +90 °<br/>total power requirement:  kw<br/>weight of the machine ca.: 10 t<br/>dimensions of the machine ca.:  m<br/>- dry-cutting machine<br/>- cnc control siemens 840d<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 275 MM
GEAR WIDTH: 58 MM
MAX. MODULE:
MIN. MODULE:
CONTROL: SIEMENS 840D
NUMBER OF TEETH: 5 - 200
RATIO OF TRANSMISSION: 10:1
CUTTER DIAMETER MAX.: 228 MM
X-AXIS: 25-350 MM
Y-AXIS: +/- 175 MM
Z-AXIS: 125-600 MM
B-AXIS: -5 / +90 °
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 10 T
DIMENSIONS OF THE MACHINE CA.: M
- DRY-CUTTING MACHINE
- CNC CONTROL SIEMENS 840D




Vendedor: WALTER KAMES GMBH
Año de construcción: usado
Ubicación: Land-
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 2400 mm<br/>gear width: - mm<br/>max. module: 35 <br/>min. module:  <br/>grinding slide stroke: 1300 mm<br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>upgrading processing ability of outer diameter to 2400 mm in 2012.<br/>with the latest technology:<br/>direct drive of the grinding spindle motor, without transmission.<br/><br/>with cnc-control siemens 840 d<br/>with steady rest<br/>min/max tailstock position over table: 925/2335 mm.<br/>extended the standard max. from 1825 to 2335 mm<br/><br/>current workpiece measurement protocol and data sheet attached.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 2400 MM
GEAR WIDTH: - MM
MAX. MODULE: 35
MIN. MODULE:
GRINDING SLIDE STROKE: 1300 MM
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
UPGRADING PROCESSING ABILITY OF OUTER DIAMETER TO 2400 MM IN 2012.
WITH THE LATEST TECHNOLOGY:
DIRECT DRIVE OF THE GRINDING SPINDLE MOTOR, WITHOUT TRANSMISSION.

WITH CNC-CONTROL SIEMENS 840 D
WITH STEADY REST
MIN/MAX TAILSTOCK POSITION OVER TABLE: 925/2335 MM.
EXTENDED THE STANDARD MAX. FROM 1825 TO 2335 MM

CURRENT WORKPIECE MEASUREMENT PROTOCOL AND DATA SHEET ATTACHED.




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-general characteristics  
gear mounting distance  266,7 mm  
pinion mounting distance  152 / 305 mm  
Ø max. the crown  457 mm  
electrical characteristics  
total power  5 cv  
dimensions and weights  
weight  2.565 kg.  
other features  
url youtube  abc://youtu.be/mp6flnrg6qm 
 GENERAL CHARACTERISTICS GEAR MOUNTING DISTANCE 266,7 MM PINION MOUNTING DISTANCE 152 / 305 MM Ø MAX. THE CROWN 457 MM ELECTRICAL CHARACTERISTICS TOTAL POWER 5 CV DIMENSIONS AND WEIGHTS WEIGHT 2.565 KG. OTHER FEATURES URL YOUTUBE ABC://YOUTU.BE/MP6FLNRG6QM
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1010 mm<br/>gear width: 0 mm<br/>max. module:  <br/>min. module:  <br/>total power requirement: 15 kw<br/>weight of the machine ca.: 9,5 t<br/>dimensions of the machine ca.:  m<br/>max. depth of tooth	10	mm<br/>max. workpiece Ø (for clearance)	1,010	mm<br/>max. external Ø of coupling	610	mm<br/><br/>sliding base withdraw	216	mm<br/>max. distance from grinding wheel to workpiece nose	90 - 430	mm<br/>max. weight of workpiece, including clamp	500	kg<br/><br/>no. of teeth	32 to 150	<br/><br/>grinding wheel Ø, approx	152 - 320	mm<br/>grinding wheel speeds, infinitely variable	0 - 3,600	rpm<br/><br/>work spindle bore	60	mm<br/> <br/>total electrical load, approx.	15 kw  -  380 v  - 50	hz<br/>weight, approx.	9,500	kg<br/><br/>accessories / special features    <br/>*	automatic roughing and finishing process via pre-settable counter and<br/>built-in feed cam.<br/>*	counter for number of teeth.<br/>*	counter for number of dressing cycles.<br/>*   2 built-on dressing units with three dressing diamonds for radius dressing, <br/>     side dressing and wheel end dressing.<br/>*   built-on index plate for 48 teeth.<br/>*   separate coolant device with band filter.     <br/>*   separate hydraulic unit.<br/>*   separate trion oil mist exhaust.     <br/>*   various small parts.<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1010 MM
GEAR WIDTH: 0 MM
MAX. MODULE:
MIN. MODULE:
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: 9,5 T
DIMENSIONS OF THE MACHINE CA.: M
MAX. DEPTH OF TOOTH 10 MM
MAX. WORKPIECE Ø (FOR CLEARANCE) 1,010 MM
MAX. EXTERNAL Ø OF COUPLING 610 MM

SLIDING BASE WITHDRAW 216 MM
MAX. DISTANCE FROM GRINDING WHEEL TO WORKPIECE NOSE 90 - 430 MM
MAX. WEIGHT OF WORKPIECE, INCLUDING CLAMP 500 KG

NO. OF TEETH 32 TO 150

GRINDING WHEEL Ø, APPROX 152 - 320 MM
GRINDING WHEEL SPEEDS, INFINITELY VARIABLE 0 - 3,600 RPM

WORK SPINDLE BORE 60 MM

TOTAL ELECTRICAL LOAD, APPROX. 15 KW - 380 V - 50 HZ
WEIGHT, APPROX. 9,500 KG

ACCESSORIES / SPECIAL FEATURES
* AUTOMATIC ROUGHING AND FINISHING PROCESS VIA PRE-SETTABLE COUNTER AND
BUILT-IN FEED CAM.
* COUNTER FOR NUMBER OF TEETH.
* COUNTER FOR NUMBER OF DRESSING CYCLES.
* 2 BUILT-ON DRESSING UNITS WITH THREE DRESSING DIAMONDS FOR RADIUS DRESSING,
SIDE DRESSING AND WHEEL END DRESSING.
* BUILT-ON INDEX PLATE FOR 48 TEETH.
* SEPARATE COOLANT DEVICE WITH BAND FILTER.
* SEPARATE HYDRAULIC UNIT.
* SEPARATE TRION OIL MIST EXHAUST.
* VARIOUS SMALL PARTS.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-general characteristics  
tooth width max  38 mm.  
advance seconds x tooth  2 - 3,1  
cutting speed  33 a 50 m/min  
radial displacement  14,8 mm.  
roll cradle feeds in minutes of angle per cutter head revolution  32,6 - 49,7 m/min.  
spindle nose with short taper, outside  99,06 mm.  
spindle speeds in standardised steps  400 rpm.  
Ø max gear  102 mm.  
electrical characteristics  
engine cooling power  2 cv.  
main motor power  10 cv.  
motor power chip conveyor  0,25 cv.  
power hydraulic motor  7,5 cv.  
voltage  220/380 v.  
dimensions and weights  
long  3.200 mm.  
weight  10.000 kg.  
width  2.250 mm.  
other features  
url youtube  abc://youtu.be/7kxixogvmvc  
 GENERAL CHARACTERISTICS TOOTH WIDTH MAX 38 MM. ADVANCE SECONDS X TOOTH 2 - 3,1 CUTTING SPEED 33 A 50 M/MIN RADIAL DISPLACEMENT 14,8 MM. ROLL CRADLE FEEDS IN MINUTES OF ANGLE PER CUTTER HEAD REVOLUTION 32,6 - 49,7 M/MIN. SPINDLE NOSE WITH SHORT TAPER, OUTSIDE 99,06 MM. SPINDLE SPEEDS IN STANDARDISED STEPS 400 RPM. Ø MAX GEAR 102 MM. ELECTRICAL CHARACTERISTICS ENGINE COOLING POWER 2 CV. MAIN MOTOR POWER 10 CV. MOTOR POWER CHIP CONVEYOR 0,25 CV. POWER HYDRAULIC MOTOR 7,5 CV. VOLTAGE 220/380 V. DIMENSIONS AND WEIGHTS LONG 3.200 MM. WEIGHT 10.000 KG. WIDTH 2.250 MM. OTHER FEATURES URL YOUTUBE ABC://YOUTU.BE/7KXIXOGVMVC
Vendedor: MAQUINAS TALLERES LUIS ALONSO S L
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 2400 mm<br/>gear width: 500 mm<br/>max. module: 34 <br/>min. module:  <br/>total power requirement: 22 kw<br/>weight of the machine ca.: 26 t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 2400 MM
GEAR WIDTH: 500 MM
MAX. MODULE: 34
MIN. MODULE:
TOTAL POWER REQUIREMENT: 22 KW
WEIGHT OF THE MACHINE CA.: 26 T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1270 mm<br/>gear width: 0 mm<br/>max. module: 15 <br/>workpiece weight: 500 kg<br/>total power requirement: 25 kw<br/>weight of the machine ca.: 14,5 t<br/>max. depth of tooth	12	mm<br/>max. workpiece Ø (for clearance)	1,524	mm<br/>max. external Ø of coupling	1,270	mm (!)<br/><br/>sliding base withdraw	254	mm<br/>max. distance from grinding wheel to workpiece nose	90 - 460	mm<br/>max. weight of workpiece, including clamp	500	kg<br/><br/>no. of teeth	20 - 360	<br/><br/>grinding wheel Ø, approx	228 - 360	mm<br/>grinding wheel speeds, infinitely variable	0 - 3,600	rpm<br/>work spindle bore	580	mm (!)<br/> <br/>total electrical load, approx.	25 kw  -  380 v  - 50	hz<br/>weight, approx.	14,500	kg<br/><br/>accessories / special features    <br/>*	modicon plc control supervises the automatic grinding process, with rough <br/>      and finish grinding via pre-settable counter and built-in feed cam.<br/>*	built-on face plate, approx. 900 mm, with centering centre.<br/>*	counter for number of teeth.<br/>*	counter for number of dressing cycles.<br/>*	motor-driven rotation of head with fine adjustment.  motor-driven rotation of face plate.<br/>*	2 built-on dressing units with three dressing diamonds for radius dressing, <br/>      side dressing and wheel end dressing. <br/>*	indexing is achieved by a change gear drive with the appropriate change gears.<br/>approx. 10 change gears are available.<br/>*	separate coolant device with band filter.     *   separate hydraulic unit.<br/>*	various small parts.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1270 MM
GEAR WIDTH: 0 MM
MAX. MODULE: 15
WORKPIECE WEIGHT: 500 KG
TOTAL POWER REQUIREMENT: 25 KW
WEIGHT OF THE MACHINE CA.: 14,5 T
MAX. DEPTH OF TOOTH 12 MM
MAX. WORKPIECE Ø (FOR CLEARANCE) 1,524 MM
MAX. EXTERNAL Ø OF COUPLING 1,270 MM (!)

SLIDING BASE WITHDRAW 254 MM
MAX. DISTANCE FROM GRINDING WHEEL TO WORKPIECE NOSE 90 - 460 MM
MAX. WEIGHT OF WORKPIECE, INCLUDING CLAMP 500 KG

NO. OF TEETH 20 - 360

GRINDING WHEEL Ø, APPROX 228 - 360 MM
GRINDING WHEEL SPEEDS, INFINITELY VARIABLE 0 - 3,600 RPM
WORK SPINDLE BORE 580 MM (!)

TOTAL ELECTRICAL LOAD, APPROX. 25 KW - 380 V - 50 HZ
WEIGHT, APPROX. 14,500 KG

ACCESSORIES / SPECIAL FEATURES
* MODICON PLC CONTROL SUPERVISES THE AUTOMATIC GRINDING PROCESS, WITH ROUGH
AND FINISH GRINDING VIA PRE-SETTABLE COUNTER AND BUILT-IN FEED CAM.
* BUILT-ON FACE PLATE, APPROX. 900 MM, WITH CENTERING CENTRE.
* COUNTER FOR NUMBER OF TEETH.
* COUNTER FOR NUMBER OF DRESSING CYCLES.
* MOTOR-DRIVEN ROTATION OF HEAD WITH FINE ADJUSTMENT. MOTOR-DRIVEN ROTATION OF FACE PLATE.
* 2 BUILT-ON DRESSING UNITS WITH THREE DRESSING DIAMONDS FOR RADIUS DRESSING,
SIDE DRESSING AND WHEEL END DRESSING.
* INDEXING IS ACHIEVED BY A CHANGE GEAR DRIVE WITH THE APPROPRIATE CHANGE GEARS.
APPROX. 10 CHANGE GEARS ARE AVAILABLE.
* SEPARATE COOLANT DEVICE WITH BAND FILTER. * SEPARATE HYDRAULIC UNIT.
* VARIOUS SMALL PARTS.




Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 400 mm<br/>gear width: 0 mm<br/>module:  <br/>pinion diameter - max.: 254 mm<br/>axial cross angle: 90 °<br/>total power requirement: 15 kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>this machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°.  the gear spindle is vertical and the pinion spindle is horizontal.  <br/>the pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. <br/>the axial pinion position can be adjusted until the quietest meshing position of the traction flank is found.  likewise, the thrust flank can be tested during the return run.  <br/>marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen.  working cycles, as well as the positioning in the tooth gap, are automatic.  the gear quality can be assessed by recording the harmonic frequencies, which are displayed on a separate monitor and which can be analyzed with a rhf control.  machine can be used for soft testing of production parts, as well as for mating sets of hardened gears and pinions prior to lapping, and for final testing after lapping to select the optimum pinion mounting distance.  also ideal for lab work, processing, and quality control.<br/><br/>max. gear outside diameter, approx.	508	mm<br/>max. pinion outside diameter, approx.	254	mm<br/>axial cross angle	90	°<br/>offset of pinion spindle above/below gear spindle, max.	102	mm <br/>diameter of taper hole, pinion spindle	99/95	mm<br/>diameter of taper hole, gear spindle	56/55	mm<br/>speeds of pinion spindle, infinitely variable	0 - 1,250	rpm<br/>speeds of gear spindle, infinitely variable	0 - 1,250	rpm<br/>spindle drive, approx.	5 / 7.5	kw<br/>total electrical load, approx.	15 kw  -  380 v  -  50	hz<br/><br/>accessories / special features<br/>*	large display for 1 / 2 / 3 harmonies, display for pinion distance, pinion speed, as well of gear torque in kg/torque, etc.<br/>*	hydraulic workpiece clamping.     *   hydraulic slide clamping.<br/>*	tank for marking compound with mixer and pump, separate.<br/>*	separate switch cabinet.     *   separate hydraulic unit.<br/>*	lots of spare parts, spare motors, etc.<br/><br/><br/>condition :   good.  machine can soon be inspected under power.<br/>delivery    :   ex stock, as inspected.<br/>payment   :   net, after conclusion of contract.<br/><br/>thank you for your interest.  we always have a good selection of gear machines available.  please let us know what you need.<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 400 MM
GEAR WIDTH: 0 MM
MODULE:
PINION DIAMETER - MAX.: 254 MM
AXIAL CROSS ANGLE: 90 °
TOTAL POWER REQUIREMENT: 15 KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
THIS MACHINE IS VERY SUITABLE FOR PRECISION PRODUCTION TESTING OF SPIRAL AND HYPOID BEVEL GEARS WITH SHAFT ANGLE 90°. THE GEAR SPINDLE IS VERTICAL AND THE PINION SPINDLE IS HORIZONTAL.
THE PINION CONE DISTANCE CAN BE ADJUSTED WHILE THE MACHINE IS WORKING IN ORDER TO FIND THE OPTIMAL MOUNTING POSITION WHEREBY THE GEAR IS LOADED WITH A PRESET TORQUE.
THE AXIAL PINION POSITION CAN BE ADJUSTED UNTIL THE QUIETEST MESHING POSITION OF THE TRACTION FLANK IS FOUND. LIKEWISE, THE THRUST FLANK CAN BE TESTED DURING THE RETURN RUN.
MARKING COMPOUND IS SPRAYED ON BOTH SIDES OF THE TEETH SO THE FLANK CONTACT PATTERN CAN BE SEEN. WORKING CYCLES, AS WELL AS THE POSITIONING IN THE TOOTH GAP, ARE AUTOMATIC. THE GEAR QUALITY CAN BE ASSESSED BY RECORDING THE HARMONIC FREQUENCIES, WHICH ARE DISPLAYED ON A SEPARATE MONITOR AND WHICH CAN BE ANALYZED WITH A RHF CONTROL. MACHINE CAN BE USED FOR SOFT TESTING OF PRODUCTION PARTS, AS WELL AS FOR MATING SETS OF HARDENED GEARS AND PINIONS PRIOR TO LAPPING, AND FOR FINAL TESTING AFTER LAPPING TO SELECT THE OPTIMUM PINION MOUNTING DISTANCE. ALSO IDEAL FOR LAB WORK, PROCESSING, AND QUALITY CONTROL.

MAX. GEAR OUTSIDE DIAMETER, APPROX. 508 MM
MAX. PINION OUTSIDE DIAMETER, APPROX. 254 MM
AXIAL CROSS ANGLE 90 °
OFFSET OF PINION SPINDLE ABOVE/BELOW GEAR SPINDLE, MAX. 102 MM
DIAMETER OF TAPER HOLE, PINION SPINDLE 99/95 MM
DIAMETER OF TAPER HOLE, GEAR SPINDLE 56/55 MM
SPEEDS OF PINION SPINDLE, INFINITELY VARIABLE 0 - 1,250 RPM
SPEEDS OF GEAR SPINDLE, INFINITELY VARIABLE 0 - 1,250 RPM
SPINDLE DRIVE, APPROX. 5 / 7.5 KW
TOTAL ELECTRICAL LOAD, APPROX. 15 KW - 380 V - 50 HZ

ACCESSORIES / SPECIAL FEATURES
* LARGE DISPLAY FOR 1 / 2 / 3 HARMONIES, DISPLAY FOR PINION DISTANCE, PINION SPEED, AS WELL OF GEAR TORQUE IN KG/TORQUE, ETC.
* HYDRAULIC WORKPIECE CLAMPING. * HYDRAULIC SLIDE CLAMPING.
* TANK FOR MARKING COMPOUND WITH MIXER AND PUMP, SEPARATE.
* SEPARATE SWITCH CABINET. * SEPARATE HYDRAULIC UNIT.
* LOTS OF SPARE PARTS, SPARE MOTORS, ETC.


CONDITION : GOOD. MACHINE CAN SOON BE INSPECTED UNDER POWER.
DELIVERY : EX STOCK, AS INSPECTED.
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT.

THANK YOU FOR YOUR INTEREST. WE ALWAYS HAVE A GOOD SELECTION OF GEAR MACHINES AVAILABLE. PLEASE LET US KNOW WHAT YOU NEED.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 215 mm<br/>gear width: 40,65 mm<br/>max. module:  <br/>total power requirement: 20 kw<br/>weight of the machine ca.: 10 t<br/>max. external Ø of workpiece	215	mm<br/>tooth profile, height x width	16 x 40.65	mm<br/>no. of teeth	5 - 200<br/>max. tooth ratio	1 : 10<br/><br/>grinding wheel Ø	51 - 190	mm<br/>grinding wheel speeds	1,000 - 6,000	rpm<br/><br/>x axis (horizontal)	152	mm<br/>y axis (vertical)	178	mm<br/>z axis (slide base plate)	304	mm<br/>distance from middle of machine to middle of workspindle	115	mm<br/>axial speed	125	     mm/sec<br/>workpiece speeds	0 - 30	rpm<br/><br/>workspindle bore, conical	3 29/32	inch  <br/><br/>total electrical load					         20 kw - 380 v - 50    hz<br/>weight, approx.							        10,000    kg<br/><br/>accessories / special features<br/><br/>*	fanuc cnc control, model 150 mb, for 7 axes, with monitor and direct input.  automatic calculation of all workpiece and grinding parameters.<br/>*	extensive coolant equipment with filter system, band filter, etc.<br/>*	driven grinding wheel dressing device with cnc dressing control for automatic compensation of form and diameter after every dressing.<br/>*	gear grinding is effected either in single component operation using a conical cup wheel (gleason 30°), or with a cylindrical cup wheel.  these grinding wheels can be made of cbn, or of traditional dressable aluminium oxide material (question of cost).  grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern.  therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.<br/><br/><br/>condition :	very good - machine can be inspected here under power<br/>delivery :	ex stock, as inspected<br/>payment :	net, after conclusion of contract<br/><br/>thank you for your interest.  we always have a good selection of gear machines available.  please let us know what you need.<br/><br/><br/><br/> MAX. WHEEL DIAMETER: 215 MM
GEAR WIDTH: 40,65 MM
MAX. MODULE:
TOTAL POWER REQUIREMENT: 20 KW
WEIGHT OF THE MACHINE CA.: 10 T
MAX. EXTERNAL Ø OF WORKPIECE 215 MM
TOOTH PROFILE, HEIGHT X WIDTH 16 X 40.65 MM
NO. OF TEETH 5 - 200
MAX. TOOTH RATIO 1 : 10

GRINDING WHEEL Ø 51 - 190 MM
GRINDING WHEEL SPEEDS 1,000 - 6,000 RPM

X AXIS (HORIZONTAL) 152 MM
Y AXIS (VERTICAL) 178 MM
Z AXIS (SLIDE BASE PLATE) 304 MM
DISTANCE FROM MIDDLE OF MACHINE TO MIDDLE OF WORKSPINDLE 115 MM
AXIAL SPEED 125 MM/SEC
WORKPIECE SPEEDS 0 - 30 RPM

WORKSPINDLE BORE, CONICAL 3 29/32 INCH

TOTAL ELECTRICAL LOAD 20 KW - 380 V - 50 HZ
WEIGHT, APPROX. 10,000 KG

ACCESSORIES / SPECIAL FEATURES

* FANUC CNC CONTROL, MODEL 150 MB, FOR 7 AXES, WITH MONITOR AND DIRECT INPUT. AUTOMATIC CALCULATION OF ALL WORKPIECE AND GRINDING PARAMETERS.
* EXTENSIVE COOLANT EQUIPMENT WITH FILTER SYSTEM, BAND FILTER, ETC.
* DRIVEN GRINDING WHEEL DRESSING DEVICE WITH CNC DRESSING CONTROL FOR AUTOMATIC COMPENSATION OF FORM AND DIAMETER AFTER EVERY DRESSING.
* GEAR GRINDING IS EFFECTED EITHER IN SINGLE COMPONENT OPERATION USING A CONICAL CUP WHEEL (GLEASON 30°), OR WITH A CYLINDRICAL CUP WHEEL. THESE GRINDING WHEELS CAN BE MADE OF CBN, OR OF TRADITIONAL DRESSABLE ALUMINIUM OXIDE MATERIAL (QUESTION OF COST). GRINDING WITH A CONICAL GRINDING WHEEL IS OF ADVANTAGE WITH REGARD TO HEAT BUILD-UP AND QUALITY OF TOOTH CONTACT PATTERN. THEREFORE THESE PAIRS OF BEVEL GEARS (FOR AUTOMOTIVE INDUSTRY) CAN BE GENERATED IN HIGH QUALITY WITH CONSISTENT ACCURACY, ECONOMICALLY, AND WITH SHORT SET-UP TIMES.


CONDITION : VERY GOOD - MACHINE CAN BE INSPECTED HERE UNDER POWER
DELIVERY : EX STOCK, AS INSPECTED
PAYMENT : NET, AFTER CONCLUSION OF CONTRACT

THANK YOU FOR YOUR INTEREST. WE ALWAYS HAVE A GOOD SELECTION OF GEAR MACHINES AVAILABLE. PLEASE LET US KNOW WHAT YOU NEED.



Vendedor: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Año de construcción: usado
Ubicación: Land-508mm hydraulic chucking automatic lapping cycles
    508MM HYDRAULIC CHUCKING AUTOMATIC LAPPING CYCLES
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1600 mm<br/>gear width: 1300 mm<br/>max. module: 30 <br/>min. module: 2 <br/>max. workpiece diameter at exterior gearing: 1600 mm<br/>min. workpiece diameter-at internal hobbing: 1600 mm<br/>z-axis: 1300 mm<br/>control: siemens 840 d<br/>profile depth: 65 mm<br/>weight of the machine ca.: 35 t<br/>machine equipped with internal hob head.<br/>very nice condition!<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1600 MM
GEAR WIDTH: 1300 MM
MAX. MODULE: 30
MIN. MODULE: 2
MAX. WORKPIECE DIAMETER AT EXTERIOR GEARING: 1600 MM
MIN. WORKPIECE DIAMETER-AT INTERNAL HOBBING: 1600 MM
Z-AXIS: 1300 MM
CONTROL: SIEMENS 840 D
PROFILE DEPTH: 65 MM
WEIGHT OF THE MACHINE CA.: 35 T
MACHINE EQUIPPED WITH INTERNAL HOB HEAD.
VERY NICE CONDITION!




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. diameter admissible	430 mm.
headstock turn	 	0-180º
distance from centre max-min.	100-355
workpiece speed		1200 r.p.m.
machine weight		3.700 kg.
    MAX. DIAMETER ADMISSIBLE 430 MM. HEADSTOCK TURN 0-180º DISTANCE FROM CENTRE MAX-MIN. 100-355 WORKPIECE SPEED 1200 R.P.M. MACHINE WEIGHT 3.700 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 200 mm<br/>gear width: 250 mm<br/>max. module: 3 <br/>min. module: 0,5 <br/>control: siemens 840 c<br/>total power requirement: 45 kw<br/>weight of the machine ca.: 7,5 t<br/>dimensions of the machine ca.: 4,4x2,35x2,66 m<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 200 MM
GEAR WIDTH: 250 MM
MAX. MODULE: 3
MIN. MODULE: 0,5
CONTROL: SIEMENS 840 C
TOTAL POWER REQUIREMENT: 45 KW
WEIGHT OF THE MACHINE CA.: 7,5 T
DIMENSIONS OF THE MACHINE CA.: 4,4X2,35X2,66 M




Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-max. distance between axis 305 mm.
min. distance between axis 152 mm.
max. diameter of the gear rim 457 mm.
machine weight 2.565 kg.    MAX. DISTANCE BETWEEN AXIS 305 MM. MIN. DISTANCE BETWEEN AXIS 152 MM. MAX. DIAMETER OF THE GEAR RIM 457 MM. MACHINE WEIGHT 2.565 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 1200 mm<br/>radial slide travel:  mm<br/>maximum axial offset: 1000 mm<br/>table diameter: 800 mm<br/>table hole: 182 mm<br/>spindle turning speed - stepless: 1200 - 6300 u/min<br/>control: siemens 840 c <br/>clamping length: 1550 mm<br/>weight of the machine ca.: 18,5 t<br/>dimensions of the machine ca.: 6,0 x 3,5 x 3,8 m<br/><br/><br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 1200 MM
RADIAL SLIDE TRAVEL: MM
MAXIMUM AXIAL OFFSET: 1000 MM
TABLE DIAMETER: 800 MM
TABLE HOLE: 182 MM
SPINDLE TURNING SPEED - STEPLESS: 1200 - 6300 U/MIN
CONTROL: SIEMENS 840 C
CLAMPING LENGTH: 1550 MM
WEIGHT OF THE MACHINE CA.: 18,5 T
DIMENSIONS OF THE MACHINE CA.: 6,0 X 3,5 X 3,8 M






Vendedor: Emuk Werkzeugmaschinen GmbH
Año de construcción: usado
Ubicación: Land-diameter of cutter min./max. 152 mm. to 304 mm.
revacycle cutters min./max. 406 a 457 mm.
coniflex cutters min./max. 229 a 381 mm.
wheel size 12? x ¼-4?.
wheel drive motor 2 cv.
weight 4083 kg.    DIAMETER OF CUTTER MIN./MAX. 152 MM. TO 304 MM. REVACYCLE CUTTERS MIN./MAX. 406 A 457 MM. CONIFLEX CUTTERS MIN./MAX. 229 A 381 MM. WHEEL SIZE 12? X ¼-4?. WHEEL DRIVE MOTOR 2 CV. WEIGHT 4083 KG.
Vendedor: Mafrie Europa S.L.
Año de construcción: usado
Ubicación: Land-max. wheel diameter: 200 mm<br/>gear width: 250 mm<br/>max. module: 3 <br/>min. module: 0,5 <br/>control: siemens 840 c<br/>total power requirement: 45 kw<br/>weight of the machine ca.: 7,5 t<br/>dimensions of the machine ca.: 4,4x2,35x2,66 m<br/>loading unit, tailstock.<br/><br/><br/><br/><br/> MAX. WHEEL DIAMETER: 200 MM
GEAR WIDTH: 250 MM
MAX. MODULE: 3
MIN. MODULE: 0,5
CONTROL: SIEMENS 840 C
TOTAL POWER REQUIREMENT: 45 KW
WEIGHT OF THE MACHINE CA.: 7,5 T
DIMENSIONS OF THE MACHINE CA.: 4,4X2,35X2,66 M
LOADING UNIT, TAILSTOCK.




Vendedor: Emuk Werkzeugmaschinen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)