spanish flag
venda máquinaria o mercancías excedentes
RESALE.BIZ
plaza para máquinaria usada en América
america map

gm emd máquina usada para la venta en RESALE.BIZ
todas las categorias

atrás back
página de inicio > palabras clave gm emd > resultados
19 artículos ordenados por
Número Categoría Foto Fabricante | Modelo
Tipo de maquinaria
Año Precio País Contacto
 página 1 
125128192 706

COMACO AGM12 para la venta
CAN CAPPER


Can Seamers high speed. Current format for cans of 0.33 cl, Fully inox steel machine
máquina usada
 
Can Seamers high speed. Current format for cans of 0.33 cl, Fully inox steel machine
2000
Precio  
  ES   solicitar
124713371 605

PAREX para la venta
Singeing and sizing machines


SINGEING PAREX
 
Precio  
  ES   solicitar
124369444 1602  

GM EMD EMD SD38M para la venta
Locomotives


REQUEST DETEILS
máquina usada
 
REQUEST DETEILS
1974
10,000 US$  
  BR   solicitar
123726134 206

GRAF EQUIPMENT GMBH GEPM660/228 para la venta
Pellet presses


PELLET PRESS 660228 Pellet mill for ring DIE and two roll shell system. Inside diameter: 660 mm Active operating width: 228 mm Active forming area: 4726 cm² Press roll Ø300232 optionally dimpled or corruga ...
máquina nueva
 
PELLET PRESS 660228 Pellet mill for ring DIE and two roll shell system. Inside diameter: 660 mm Active operating width: 228 mm Active forming area: 4726 cm² Press roll Ø300232 optionally dimpled or corrugated Front door Stainless steel front door with large opening angle opening to the leftern side. Permanent magnets on flow mounts, pneumatic operated overload bypass protection gate. Two knives with step less length adjustments integrated in the door. Machine housing All housing parts are cut by precision laser. The machine base, the base plate and the housing are welded and reinforced. Drive Freely selectable. Motor cables not included. Equipment Central lubrication for press roll and main shaft Manual roll shell adjustment Overload protection provided by a safety pin Conical die seat for easy change of the die Adjustable scraper for optimal product distribution PELLET PRESS FEEDER AND CONDITIONER Freely selectable
new
Precio  
  US   solicitar
123009807 1108  

GM EMD 645 para la venta
SPARE PARTS


Semi new 40 power packs with less than 400 hours of use, perfect for immediate use, std measures.
máquina usada
 
Semi new 40 power packs with less than 400 hours of use, perfect for immediate use, std measures.
1978
2,700 usd  
  BR   solicitar
122020800 409

PESTER Pewo - Pack 450 SN para la venta
Wrapping machines


film wrapping machine; dimensions of the machine (without additional equipment): 1150x1235x1580 mm; work field: max. insertion length 300mm - max. Insertion width 540mm - max. Insertion height 250mm; Weight: 380 Kg; colo ...
máquina usada
 
film wrapping machine; dimensions of the machine (without additional equipment): 1150x1235x1580 mm; work field: max. insertion length 300mm - max. Insertion width 540mm - max. Insertion height 250mm; Weight: 380 Kg; color of parts painted normally "Ral 1013"; compressed air inlets: inlet pressure min. 6.0 bar and max. 12.0 bar; General machine dimensions: 2800x2500x2000 mm; with boxing machine that adds curved transport band with 3000 mm length and 160 mm width; 3X380 V + N + PE 50 Hz; 5.5 bar; DBP: 2 623 907.
1989
used machinery auction RESALE 9,500 €  
  ES   solicitar
93067921 1101

GM EMD EMD 20V645E3 para la venta
Diesel generators


EQUIPMENTS with little use, were in the airport as no-brake, never been open for repairs, no damage.
máquina usada
 
EQUIPMENTS with little use, were in the airport as no-brake, never been open for repairs, no damage.
1972
120,000 USD  
  BR   solicitar
82137501 706  

CAPPER BERTOLASO SIGMA 105 para la venta


5-head Capper BERTOLASO Modele: SIGMA 105 5 capping heads

 
5-head Capper BERTOLASO Modele: SIGMA 105 5 capping heads
 
Precio  
  ES   solicitar
25585670 104  

MVM GM-1000 para la venta
Round Table Flat Grinding Machines


General Characteristics Surface to grinding 1000 x 140 mm Advances wheelhead 0.005 0,150 mm Height to rectify 55 mm Maximum length to grinding 1000 mm Type of Tool Segmentos Wheel speed 2800 rpm ...

 
General Characteristics Surface to grinding 1000 x 140 mm Advances wheelhead 0.005 0,150 mm Height to rectify 55 mm Maximum length to grinding 1000 mm Type of Tool Segmentos Wheel speed 2800 rpm Ø Tool 150 mm Electrical Characteristics Engine Cooling Power 0,2 Cv Motor power wheelhead 3 Cv Total Power 3,5 Kv Voltage 220380V Dimensions and Weights High 1370 mm Long 1700 mm Weight 390 Kg Width 400 mm Other Features Included Accessories Mesa inclinable tilting table No. Manufacturing 298302 Year 1998
 
Precio  
  ES   solicitar
6695331 409

BERTOLASO Sigma 603 para la venta
CAPPER


3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
máquina usada
 
3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
1995
Precio  
  ES   solicitar
6695330 709

BERTOLASO Sigma 603 para la venta
CAPPER


3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
máquina usada
 
3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
1995
Precio  
  ES   solicitar
6695329 706

BERTOLASO Sigma 603 para la venta
CAPPER


3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
máquina usada
 
3 head-capper for plastic cap. Inlet right. Speed: 4.000 BPH
1995
Precio  
  ES   solicitar
4451614 604

API - SCHMIDT SIGMA 85 para la venta
plate heat exchanger


1 plate heat exchanger, API - SCHMIDT (Germany) type PLATE HEAT EXCHANGER SIGMA 85 This heat exchanger was used for heat recovery of a major dyeing plant. Heating source was hot drain water from the dyeing machines. Thi ...

 
1 plate heat exchanger, API - SCHMIDT (Germany) type PLATE HEAT EXCHANGER SIGMA 85 This heat exchanger was used for heat recovery of a major dyeing plant. Heating source was hot drain water from the dyeing machines. This heat power source was used for heating up cold clean water for a new dyeing batch
 
Precio  
  PT   solicitar
125789727 206

LIGMATECH MDE 20/S para la venta
Carcase Press


Weight approx.: 9700 kgDimensions (l x w x h) approx.: 5100 x 3100 x 3000 mmDescription: Serial number 0-306-09-7629, HOMATIC NC 21 control, 6 horizontal pressing units, 4 frontal pressing units, Transfer belt size 5100  ...
máquina usada
 
Weight approx.: 9700 kgDimensions (l x w x h) approx.: 5100 x 3100 x 3000 mmDescription: Serial number 0-306-09-7629, HOMATIC NC 21 control, 6 horizontal pressing units, 4 frontal pressing units, Transfer belt size 5100 x 600 mm, Pressing height from 320 to 1400 mm, Pressing length from 170 to 2200 mm, Pressing depth 600 mm, Maximum pressure 10 bar, CE Standards, With safety cage, For further information see photos.
2002
used machinery auction RESALE 7,500 €  
  ES   solicitar
125678052 206

GLOBAL GMP2513 para la venta
Membrane Press


Weight approx.: 150 kgDimensions (l x w x h) approx.: 2600 x 1400 x 1300 mmDescription: Membrane press for curved, working pallet: 2500 x 1300 x 400 mm. Vacuum pump without oil. connected to 220V string inverters.

 
Weight approx.: 150 kgDimensions (l x w x h) approx.: 2600 x 1400 x 1300 mmDescription: Membrane press for curved, working pallet: 2500 x 1300 x 400 mm. Vacuum pump without oil. connected to 220V string inverters.
 
Precio  
  ES   solicitar
125678070 1900

LIGMATECH ZHR 01/R065 para la venta
Return conveyor


Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2100 x 7000 x 1500 mmDescription: Motorized conveyor panel transport 900 x 5000 mm.  , Roller conveyor 900 x 2000 mm
máquina usada
 
Weight approx.: 1050 kgDimensions (l x w x h) approx.: 2100 x 7000 x 1500 mmDescription: Motorized conveyor panel transport 900 x 5000 mm.  , Roller conveyor 900 x 2000 mm
2006
Precio  
  ES   solicitar
125494004 201

GIBEN SIGMATIC 101 para la venta
Panel Saw & Angular Plant Machine


serial number: 046.07.380 Weight approx.: 20500 kgcutting length: 3500 mmDimensions (l x w x h) approx.: 20500 x 15000 x 2200 mmcutting depth: 2200 mmsoftware: GDrive Syst V5.1 saw blade protection: 101 mmclamps piece: 7 ...
máquina usada
 
serial number: 046.07.380 Weight approx.: 20500 kgcutting length: 3500 mmDimensions (l x w x h) approx.: 20500 x 15000 x 2200 mmcutting depth: 2200 mmsoftware: GDrive Syst V5.1 saw blade protection: 101 mmclamps piece: 7 & 8 piecetotal power approx: 50 KWDescription: GIBEN SIGMATIC 101 Panel Saw &, Angular Plant Machine with the following Equipment: - swiveabel roller conveyor for Panel loading - feeding conveyorv - Lifting Table - length saw - cross saw - take-out tables with air cushions
2008
Precio  
  ES   solicitar
125386444 206

LIGMATECH MPC400 / MDE150 para la venta
Carcase Assembling Line


Weight approx.: 25000 kgDimensions (l x w x h) approx.: 35000 x 3500 x 3500 mmDescription: LIGMATECH MPC400 MDE150 Carcase Assebling Line consisting of: - conveyor belt type ZTG 1002808 - 2800 x 800 mm - turning Stat ...
máquina usada
 
Weight approx.: 25000 kgDimensions (l x w x h) approx.: 35000 x 3500 x 3500 mmDescription: LIGMATECH MPC400 MDE150 Carcase Assebling Line consisting of: - conveyor belt type ZTG 1002808 - 2800 x 800 mm - turning Station typ MTD 1002308 - 2300 x 800 mm - automatic glueing Station type MLK 1002108 with 5 nozzles and automatic glue supply. - roller conveyor with pneumatic Lifting function type ZTR 1002508 - turning Station with vacuum unit type MHG 100 - assembly press LIGMATECH MPC 400, for pre-mounting of the individual parts, with belt feed, various vacuum suction cups and aligners for inner bottoms - carcase press LIGMATECH MDE 150, with nailing robot - turning Station verticalhorizontal type MTA 200231308 - 2 Pcs. conveyor belts type MTB 1003808 - 3800 x 800 mm - conveyor belt type MTB 1000808 - 800 x 800 mm - turning Station type MTD 1002308
2007
Precio  
  ES   solicitar
125017508 202

BALESTRINI PRAGMA para la venta
Double-sided Multiple Mortiser


Weight approx.: 1750 kgDimensions (l x w x h) approx.: 2350 x 2300 x 1700 mmDescription: Serial number AF177 H7, 5 Spindle groups, Max ø of bits 16 mm, Max. Oscillation lenght 100 mm, Max. Drilling depth 80 mm, Spindle  ...
máquina usada
 
Weight approx.: 1750 kgDimensions (l x w x h) approx.: 2350 x 2300 x 1700 mmDescription: Serial number AF177 H7, 5 Spindle groups, Max ø of bits 16 mm, Max. Oscillation lenght 100 mm, Max. Drilling depth 80 mm, Spindle center distances from 84 to 1170 mm, Worktable size 1200 x 250 mm, Spindle motors power 1 kW each one, Spindle rotation 600012000 Rpm, CE standards, For further information see pictures.
1995
used machinery auction RESALE 3,200 €  
  PT   solicitar
 página 1