10 ofertas

Año de construcción: usado
Ubicación: Land-faceplate diameter 2850 mm<br/>  swing diameter 4000 mm<br/>  turning height 2000 mm<br/>  control s 840 dsl<br/>  stroke of vertical slide 1400 mm<br/>  tool holder 1<br/>  distance face plate/tool carrier 2150 mm<br/>  vertical adjustment of the crossrail 1700 mm<br/>  workpiece weight 20 t<br/>  faceplate turning speed range -stepless- 2,5 - 80 u/min<br/>  feeds 0 - 2000 mm/min<br/>  rapid traverse 2,15 m/min<br/>  milling spindle drive 5,5 kw<br/>  milling head speed 2-3500 u/min<br/>  total power requirement 55 kw<br/>  weight of the machine ca. 65 t<br/>  dimensions of the machine ca. 6,8 x 5,2 x 5,5 m<br/>  <br/>  <br/>  <br/>  this machine was equipped as per requirements of a big german company<br/>  especially for work on housings of turbines. the machine has c- axe with life<br/>  tooling for drilling, threat boring and light milling work. it has a siemens<br/>  840 dsl control. it has a pickup tool magazin for changing the tools. machine<br/>  will be supplied with chip conveyors, safety guard around the machine and an<br/>  adapter faceplate with 3800 mm diameter. the machine table is supported by<br/>  hydrostatic. FACEPLATE DIAMETER 2850 MM
SWING DIAMETER 4000 MM
TURNING HEIGHT 2000 MM
CONTROL S 840 DSL
STROKE OF VERTICAL SLIDE 1400 MM
TOOL HOLDER 1
DISTANCE FACE PLATE/TOOL CARRIER 2150 MM
VERTICAL ADJUSTMENT OF THE CROSSRAIL 1700 MM
WORKPIECE WEIGHT 20 T
FACEPLATE TURNING SPEED RANGE -STEPLESS- 2,5 - 80 U/MIN
FEEDS 0 - 2000 MM/MIN
RAPID TRAVERSE 2,15 M/MIN
MILLING SPINDLE DRIVE 5,5 KW
MILLING HEAD SPEED 2-3500 U/MIN
TOTAL POWER REQUIREMENT 55 KW
WEIGHT OF THE MACHINE CA. 65 T
DIMENSIONS OF THE MACHINE CA. 6,8 X 5,2 X 5,5 M



THIS MACHINE WAS EQUIPPED AS PER REQUIREMENTS OF A BIG GERMAN COMPANY
ESPECIALLY FOR WORK ON HOUSINGS OF TURBINES. THE MACHINE HAS C- AXE WITH LIFE
TOOLING FOR DRILLING, THREAT BORING AND LIGHT MILLING WORK. IT HAS A SIEMENS
840 DSL CONTROL. IT HAS A PICKUP TOOL MAGAZIN FOR CHANGING THE TOOLS. MACHINE
WILL BE SUPPLIED WITH CHIP CONVEYORS, SAFETY GUARD AROUND THE MACHINE AND AN
ADAPTER FACEPLATE WITH 3800 MM DIAMETER. THE MACHINE TABLE IS SUPPORTED BY
HYDROSTATIC.
Vendedor: ATMH Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-weight approx.: 30000 kg<br/>swing diameter: 2000 mm<br/>dimensions (l x w x h) approx.: 69000 x 7000 x 6000 mm<br/>turning speed range: 0 - 250 rpm<br/>rapid travel - longitudinal/face: 6 m/min<br/>feed speeds: 0 - 2000 mm/min<br/>total power requirement: 55 kw<br/>control: fanuc 0i-d <br/>turning height: 2000 mm<br/>description: <h3>gmw vtm 2000 cnc vertical lathe (new demonstration machine available now)</h3> <br> machine comes with housing and 12 positions automatic tool changer.<br> <br> face diameter 1600 mm<br> circulation diameter 2000 mm<br> turning height 2000 mm<br> max. workpiece weight 12,000 kg<br> <br> stroke, vertical slide 1400 mm<br> 1 tool holder<br> <br> distance between face plate and tool carrier 2000 mm<br> vertical adjustment of the crossbar 1500 mm<br> horizontal adjustment of the slide 1850 mm<br> adjustment speed of the crossbeam 300 mm / min<br> <br> this machine is a new exhibition machine,<br> including a chip conveyor with an integrated coolant system.<br> this is offered with full service and warranty by gmw.<br> <br> WEIGHT APPROX.: 30000 KG
SWING DIAMETER: 2000 MM
DIMENSIONS (L X W X H) APPROX.: 69000 X 7000 X 6000 MM
TURNING SPEED RANGE: 0 - 250 RPM
RAPID TRAVEL - LONGITUDINAL/FACE: 6 M/MIN
FEED SPEEDS: 0 - 2000 MM/MIN
TOTAL POWER REQUIREMENT: 55 KW
CONTROL: FANUC 0I-D
TURNING HEIGHT: 2000 MM
DESCRIPTION:

GMW VTM 2000 CNC VERTICAL LATHE (NEW DEMONSTRATION MACHINE AVAILABLE NOW)


MACHINE COMES WITH HOUSING AND 12 POSITIONS AUTOMATIC TOOL CHANGER.

FACE DIAMETER 1600 MM
CIRCULATION DIAMETER 2000 MM
TURNING HEIGHT 2000 MM
MAX. WORKPIECE WEIGHT 12,000 KG

STROKE, VERTICAL SLIDE 1400 MM
1 TOOL HOLDER

DISTANCE BETWEEN FACE PLATE AND TOOL CARRIER 2000 MM
VERTICAL ADJUSTMENT OF THE CROSSBAR 1500 MM
HORIZONTAL ADJUSTMENT OF THE SLIDE 1850 MM
ADJUSTMENT SPEED OF THE CROSSBEAM 300 MM / MIN

THIS MACHINE IS A NEW EXHIBITION MACHINE,
INCLUDING A CHIP CONVEYOR WITH AN INTEGRATED COOLANT SYSTEM.
THIS IS OFFERED WITH FULL SERVICE AND WARRANTY BY GMW.

Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-turning diameter: 1070 mm<br/>turning length: 2300 mm<br/>control: siemens 828 dsl <br/>turning diameter over slide rest: 680 mm<br/>spindle turning speed range: 1 - 800 u/min<br/>longitudinal feeds:: 0,001-500 mm/rev<br/>cross feeds:: 0,001-500 mm/rev<br/>spindle passage: 153 mm<br/>rapid travel - longitudinal/face: 10/8 m/min<br/>switching steps: 4 <br/>face slide travel: 580 mm<br/>max. workpiece weight between centres: 8000 kg<br/>total power requirement: 22/26 kw<br/>weight of the machine ca.: 12,3 t<br/>dimensions of the machine ca.: 6,9 x 2,7 x 2,6 m<br/>new machine as a flat bed machine ! machine with housing (ce conform), multifix <br/>quick tool changing device, chip conveyor, three jaw chuck, steady, cooling <br/>arrangement, hydraulic tailstock, machine led light and 2 electronic hand <br/>wheels for x and z axes. control siemens 828 dsl with shop turn.<br/><br/><br/><br/><br/> TURNING DIAMETER: 1070 MM
TURNING LENGTH: 2300 MM
CONTROL: SIEMENS 828 DSL
TURNING DIAMETER OVER SLIDE REST: 680 MM
SPINDLE TURNING SPEED RANGE: 1 - 800 U/MIN
LONGITUDINAL FEEDS:: 0,001-500 MM/REV
CROSS FEEDS:: 0,001-500 MM/REV
SPINDLE PASSAGE: 153 MM
RAPID TRAVEL - LONGITUDINAL/FACE: 10/8 M/MIN
SWITCHING STEPS: 4
FACE SLIDE TRAVEL: 580 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 8000 KG
TOTAL POWER REQUIREMENT: 22/26 KW
WEIGHT OF THE MACHINE CA.: 12,3 T
DIMENSIONS OF THE MACHINE CA.: 6,9 X 2,7 X 2,6 M
NEW MACHINE AS A FLAT BED MACHINE ! MACHINE WITH HOUSING (CE CONFORM), MULTIFIX
QUICK TOOL CHANGING DEVICE, CHIP CONVEYOR, THREE JAW CHUCK, STEADY, COOLING
ARRANGEMENT, HYDRAULIC TAILSTOCK, MACHINE LED LIGHT AND 2 ELECTRONIC HAND
WHEELS FOR X AND Z AXES. CONTROL SIEMENS 828 DSL WITH SHOP TURN.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-spindle passage: 410 mm<br/>turning diameter over bed: 1420 mm<br/>turning diameter over slide rest: 1000 mm<br/>turning length: 4000 mm<br/>control: fanuc 0i <br/>spindle turning speed range: 1-500 u/min<br/>longitudinal feeds:: 0,001-500 mm/rev<br/>cross feeds:: 0,001-500 mm/rev<br/>rapid travel - longitudinal/face: 6 m/min<br/>switching steps: 4 <br/>face slide travel: 900 mm<br/>max. workpiece weight between centres: 12000 kg<br/>total power requirement: 37 kw<br/>weight of the machine ca.: 15 t<br/>dimensions of the machine ca.: 9,2 x 3,3 x 3 m<br/>new machine as a flat bed machine ! machine with housing (ce conform), 8 <br/>position sauter turret, chip conveyor and three jaw chuck at front and rear of <br/>headstock.control: fanuc 0i. machine with big spindle hole.<br/><br/><br/><br/><br/> SPINDLE PASSAGE: 410 MM
TURNING DIAMETER OVER BED: 1420 MM
TURNING DIAMETER OVER SLIDE REST: 1000 MM
TURNING LENGTH: 4000 MM
CONTROL: FANUC 0I
SPINDLE TURNING SPEED RANGE: 1-500 U/MIN
LONGITUDINAL FEEDS:: 0,001-500 MM/REV
CROSS FEEDS:: 0,001-500 MM/REV
RAPID TRAVEL - LONGITUDINAL/FACE: 6 M/MIN
SWITCHING STEPS: 4
FACE SLIDE TRAVEL: 900 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 12000 KG
TOTAL POWER REQUIREMENT: 37 KW
WEIGHT OF THE MACHINE CA.: 15 T
DIMENSIONS OF THE MACHINE CA.: 9,2 X 3,3 X 3 M
NEW MACHINE AS A FLAT BED MACHINE ! MACHINE WITH HOUSING (CE CONFORM), 8
POSITION SAUTER TURRET, CHIP CONVEYOR AND THREE JAW CHUCK AT FRONT AND REAR OF
HEADSTOCK.CONTROL: FANUC 0I. MACHINE WITH BIG SPINDLE HOLE.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Precio: 2.250 €
Ubicación: Land-clamping angle, t-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box <br /><br /> -difficult execution <br /> -nut 22 mm <br /> -1x dice available <br /> prize piece <br /> dimensions 1200/700 / h1000 mm <br /> -weight 1452 kg CLAMPING ANGLE, T-SLOT PLATE, CLAMPING TABLE, CLAMPING CUBE, CLAMPING PLATE, CLAMPING TOWER, CLAMPING BOX

-DIFFICULT EXECUTION
-NUT 22 MM
-1X DICE AVAILABLE
PRIZE PIECE
DIMENSIONS 1200/700 / H1000 MM
-WEIGHT 1452 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 2.450 €
Ubicación: Land-clamping angle, t-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box <br /><br /> -difficult execution <br /> -nut 22 mm <br /> -1x dice available <br /> prize piece <br /> dimensions 1200/700 / h1000 mm <br /> -weight 1842 kg CLAMPING ANGLE, T-SLOT PLATE, CLAMPING TABLE, CLAMPING CUBE, CLAMPING PLATE, CLAMPING TOWER, CLAMPING BOX

-DIFFICULT EXECUTION
-NUT 22 MM
-1X DICE AVAILABLE
PRIZE PIECE
DIMENSIONS 1200/700 / H1000 MM
-WEIGHT 1842 KG
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-turning diameter: 1270 mm<br/>turning length: 4300 mm<br/>control: siemens 828 dsl <br/>turning diameter over slide rest: 880 mm<br/>spindle turning speed range: 1- 680 u/min<br/>longitudinal feeds:: 0,001-500 mm/rev<br/>cross feeds:: 0,001-500 mm/rev<br/>spindle passage: 153 mm<br/>rapid travel - longitudinal/face: 10/8 m/min<br/>switching steps: 4 <br/>face slide travel: 680 mm<br/>max. workpiece weight between centres: 8000 kg<br/>total power requirement: 22/26 kw<br/>weight of the machine ca.: 14,8 t<br/>dimensions of the machine ca.: 8,9 x 3 x 2,75 m<br/>new machine as a flat bed machine ! machine with housing (ce conform), 8 <br/>position sauter turret, chip conveyor and three jaw chuck.control siemens 828 <br/>dsl.<br/><br/><br/><br/><br/> TURNING DIAMETER: 1270 MM
TURNING LENGTH: 4300 MM
CONTROL: SIEMENS 828 DSL
TURNING DIAMETER OVER SLIDE REST: 880 MM
SPINDLE TURNING SPEED RANGE: 1- 680 U/MIN
LONGITUDINAL FEEDS:: 0,001-500 MM/REV
CROSS FEEDS:: 0,001-500 MM/REV
SPINDLE PASSAGE: 153 MM
RAPID TRAVEL - LONGITUDINAL/FACE: 10/8 M/MIN
SWITCHING STEPS: 4
FACE SLIDE TRAVEL: 680 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 8000 KG
TOTAL POWER REQUIREMENT: 22/26 KW
WEIGHT OF THE MACHINE CA.: 14,8 T
DIMENSIONS OF THE MACHINE CA.: 8,9 X 3 X 2,75 M
NEW MACHINE AS A FLAT BED MACHINE ! MACHINE WITH HOUSING (CE CONFORM), 8
POSITION SAUTER TURRET, CHIP CONVEYOR AND THREE JAW CHUCK.CONTROL SIEMENS 828
DSL.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-length: 4000 mm<br/>width: 2000 mm<br/>plates available: 4 <br/>weight: 5,5 t<br/>thickness of bolster: 300 mm<br/>new - plates have 6 t-slots each with 36 mm width. price per plate. price per <br/>piece.<br/>different sizes available on request. (3 pieces available). also other <br/>dimensions available on request. minimum purchase of 2 plates.<br/><br/><br/><br/><br/> LENGTH: 4000 MM
WIDTH: 2000 MM
PLATES AVAILABLE: 4
WEIGHT: 5,5 T
THICKNESS OF BOLSTER: 300 MM
NEW - PLATES HAVE 6 T-SLOTS EACH WITH 36 MM WIDTH. PRICE PER PLATE. PRICE PER
PIECE.
DIFFERENT SIZES AVAILABLE ON REQUEST. (3 PIECES AVAILABLE). ALSO OTHER
DIMENSIONS AVAILABLE ON REQUEST. MINIMUM PURCHASE OF 2 PLATES.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-faceplate diameter: 1600 mm<br/>swing diameter: 2000 mm<br/>turning height: 2000 mm<br/>control: fanuc 0i-d <br/>stroke of vertical slide: 1400 mm<br/>tool holder: 1 <br/>distance face plate/tool carrier: 2000 mm<br/>vertical adjustment of the crossrail: 1500 mm<br/>workpiece weight: 12 t<br/>faceplate turning speed range -stepless-: 2 - 250 u/min<br/>feeds: 0 - 2000 mm/min<br/>rapid traverse: 6 m/min<br/>horizontal adjustment of slide: 1850 mm<br/>adjustment speed of cross-rail: 300 mm/min<br/>total power requirement: 55 kw<br/>weight of the machine ca.: 30 t<br/>dimensions of the machine ca.: 6,9 x 7 x 6 m<br/>this machine is a new machine which is used by our sister company gmw machines <br/>as a show room machine. it will be sold with full service and warranty by gmw.<br/>control: fanuc 0i-d. machine has safety guard and 12 position atc.<br/><br/><br/><br/><br/> FACEPLATE DIAMETER: 1600 MM
SWING DIAMETER: 2000 MM
TURNING HEIGHT: 2000 MM
CONTROL: FANUC 0I-D
STROKE OF VERTICAL SLIDE: 1400 MM
TOOL HOLDER: 1
DISTANCE FACE PLATE/TOOL CARRIER: 2000 MM
VERTICAL ADJUSTMENT OF THE CROSSRAIL: 1500 MM
WORKPIECE WEIGHT: 12 T
FACEPLATE TURNING SPEED RANGE -STEPLESS-: 2 - 250 U/MIN
FEEDS: 0 - 2000 MM/MIN
RAPID TRAVERSE: 6 M/MIN
HORIZONTAL ADJUSTMENT OF SLIDE: 1850 MM
ADJUSTMENT SPEED OF CROSS-RAIL: 300 MM/MIN
TOTAL POWER REQUIREMENT: 55 KW
WEIGHT OF THE MACHINE CA.: 30 T
DIMENSIONS OF THE MACHINE CA.: 6,9 X 7 X 6 M
THIS MACHINE IS A NEW MACHINE WHICH IS USED BY OUR SISTER COMPANY GMW MACHINES
AS A SHOW ROOM MACHINE. IT WILL BE SOLD WITH FULL SERVICE AND WARRANTY BY GMW.
CONTROL: FANUC 0I-D. MACHINE HAS SAFETY GUARD AND 12 POSITION ATC.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-turning diameter: 1420 mm<br/>turning length: 4300 mm<br/>control: siemens 828 dsl <br/>turning diameter over slide rest: 1000 mm<br/>spindle turning speed range: 1-500 u/min<br/>longitudinal feeds:: 0,001-500 mm/rev<br/>cross feeds:: 0,001-500 mm/rev<br/>spindle passage: 153 mm<br/>rapid travel - longitudinal/face: 6 m/min<br/>switching steps: 4 <br/>face slide travel: 900 mm<br/>max. workpiece weight between centres: 10000 kg<br/>total power requirement: 30/37 kw<br/>weight of the machine ca.: 20,5 t<br/>dimensions of the machine ca.: 9,2 x 3,3 x 3 m<br/>new machine as a flat bed machine ! machine with housing (ce conform), 8 <br/>position sauter turret, chip conveyor and three jaw chuck.control siemens 828 <br/>dsl.<br/><br/><br/><br/><br/> TURNING DIAMETER: 1420 MM
TURNING LENGTH: 4300 MM
CONTROL: SIEMENS 828 DSL
TURNING DIAMETER OVER SLIDE REST: 1000 MM
SPINDLE TURNING SPEED RANGE: 1-500 U/MIN
LONGITUDINAL FEEDS:: 0,001-500 MM/REV
CROSS FEEDS:: 0,001-500 MM/REV
SPINDLE PASSAGE: 153 MM
RAPID TRAVEL - LONGITUDINAL/FACE: 6 M/MIN
SWITCHING STEPS: 4
FACE SLIDE TRAVEL: 900 MM
MAX. WORKPIECE WEIGHT BETWEEN CENTRES: 10000 KG
TOTAL POWER REQUIREMENT: 30/37 KW
WEIGHT OF THE MACHINE CA.: 20,5 T
DIMENSIONS OF THE MACHINE CA.: 9,2 X 3,3 X 3 M
NEW MACHINE AS A FLAT BED MACHINE ! MACHINE WITH HOUSING (CE CONFORM), 8
POSITION SAUTER TURRET, CHIP CONVEYOR AND THREE JAW CHUCK.CONTROL SIEMENS 828
DSL.




Vendedor: Wirths GmbH, Werkzeugmaschinen
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)