62 ofertas

Año de construcción: usado
Precio: 32.950 €
Ubicación: Land-honeycomb/cassettes used for warehouse, matthiessen, 2-bladed version, total 840 cassettes - -:
 
price from site: â?¬32.950.-(net), excluding disassembly, transport, etc.!
 
manufacturer: matthiessen anlagenbau gmbh
type: rfz type apos
construction number (year): 02 / 88
 
system: 2-bladed version
number of honeycomb/cassettes: 840 cassettes, 420 cartridges left wing, 420 cartridges right wing.
dimensions wing: 20 x 8 metres, about 9 meters high.
construction of a grand piano: 14 cassettes high, 30 cassettes long - first 4
vertical lines of ã  14 cassette "small", then 6 vertical rows ã  14
cassette "large", then again 20 vertical rows of ã  14 cassettes 'small'.
at the end of the wing support elements.
honeycomb/cassette "small" dimensions: h b 440 x 500 x l approx. 8000 mm
honeycomb/cassette "big" dimensions: h b 550 x 630 x l approx. 8000 mm
maximum subject load per honeycomb/cassette: probably 3,000 kg
all cassettes with roller roller cassette input.
 
central storage and retrieval unit between the wings, procedure bar rail, max 1500 kp and 3000 kp.
solenoid/battery magnet mannesmann demag type dbm 34, 2,000 kg.
leuze electronic photocell system.
integrated crane (operated by joystick) with 2 hoists and crossbeams.
transport system with drop table.
30 meters can run rails in the floor ripped out and the new
site are cast again.
 
leading delivery table, firmly mounted, electric chain drive,
to promote material on table of the central unit.
base tray 8 x 8 meters.
 
in addition to selected storage space left and right, as well as barriers of
total investment are part of the offer.
total area: 40.00 x 24.00 m
available as of now.
control unit siemens 3ve6201-4cs11zur electronic order processing
condition: used
available: available now
location: room berlin HONEYCOMB/CASSETTES USED FOR WAREHOUSE, MATTHIESSEN, 2-BLADED VERSION, TOTAL 840 CASSETTES - -: PRICE FROM SITE: Â?¬32.950.-(NET), EXCLUDING DISASSEMBLY, TRANSPORT, ETC.! MANUFACTURER: MATTHIESSEN ANLAGENBAU GMBH TYPE: RFZ TYPE APOS CONSTRUCTION NUMBER (YEAR): 02 / 88 SYSTEM: 2-BLADED VERSION NUMBER OF HONEYCOMB/CASSETTES: 840 CASSETTES, 420 CARTRIDGES LEFT WING, 420 CARTRIDGES RIGHT WING. DIMENSIONS WING: 20 X 8 METRES, ABOUT 9 METERS HIGH. CONSTRUCTION OF A GRAND PIANO: 14 CASSETTES HIGH, 30 CASSETTES LONG - FIRST 4 VERTICAL LINES OF à 14 CASSETTE "SMALL", THEN 6 VERTICAL ROWS à 14 CASSETTE "LARGE", THEN AGAIN 20 VERTICAL ROWS OF à 14 CASSETTES 'SMALL'. AT THE END OF THE WING SUPPORT ELEMENTS. HONEYCOMB/CASSETTE "SMALL" DIMENSIONS: H B 440 X 500 X L APPROX. 8000 MM HONEYCOMB/CASSETTE "BIG" DIMENSIONS: H B 550 X 630 X L APPROX. 8000 MM MAXIMUM SUBJECT LOAD PER HONEYCOMB/CASSETTE: PROBABLY 3,000 KG ALL CASSETTES WITH ROLLER ROLLER CASSETTE INPUT. CENTRAL STORAGE AND RETRIEVAL UNIT BETWEEN THE WINGS, PROCEDURE BAR RAIL, MAX 1500 KP AND 3000 KP. SOLENOID/BATTERY MAGNET MANNESMANN DEMAG TYPE DBM 34, 2,000 KG. LEUZE ELECTRONIC PHOTOCELL SYSTEM. INTEGRATED CRANE (OPERATED BY JOYSTICK) WITH 2 HOISTS AND CROSSBEAMS. TRANSPORT SYSTEM WITH DROP TABLE. 30 METERS CAN RUN RAILS IN THE FLOOR RIPPED OUT AND THE NEW SITE ARE CAST AGAIN. LEADING DELIVERY TABLE, FIRMLY MOUNTED, ELECTRIC CHAIN DRIVE, TO PROMOTE MATERIAL ON TABLE OF THE CENTRAL UNIT. BASE TRAY 8 X 8 METERS. IN ADDITION TO SELECTED STORAGE SPACE LEFT AND RIGHT, AS WELL AS BARRIERS OF TOTAL INVESTMENT ARE PART OF THE OFFER. TOTAL AREA: 40.00 X 24.00 M AVAILABLE AS OF NOW. CONTROL UNIT SIEMENS 3VE6201-4CS11ZUR ELECTRONIC ORDER PROCESSING CONDITION: USED AVAILABLE: AVAILABLE NOW LOCATION: ROOM BERLIN
Vendedor: Alexander von Westernhagen
Año de construcción: usado
Ubicación: Land-weight approx.: 8000 kg<br/>coil weight: max. 7000 kg<br/>coil internal diameter: 500/600 mm<br/>coil external diameter: 1400 mm<br/>strip width: 1500 mm<br/>dimensions (l x w x h) approx.: 8922 x 2500 x 2600 mm<br/>description: <h3>the longitudinal and transverse slitting line consists of:</h3> <br> <b>swift decoiler psm 15 grandini,</b><br> - max. width of the coil 1,500 mm max. capacity 10,000 kg,<br> - max. coil diameter 1,400 mm,<br> - sheet thickness 0.4 to 2.5 mm,<br> - electrohydraulic drive chuck,<br> - pneumatically controlled sliding rollers,<br> - hydraulic extension of the mandrel 470-520 mm,<br> - max. running speed 30 m/min,<br> - weight 3200 kg, dimensions 1230 x 2500 x 1870 mm<br> <b>articulated plane pnsu 15:</b><br> - dimensions 3565 x 2500 x 1250 mm<br> <b>shearing line ltcb 7415 tt grandini straightening and cutting machine (compact line)</b><br> - 1550 x 2.5 mm,<br> - 2 pull rolls with diameter 120 mm, pneumatically driven,<br> - 7 rolls made of high quality chrome steel, chrome plated, diam. 120 mm - for straightening,<br> - length measuring system 0 -100 mm,<br> - electrically pneumatically driven guillotine (4 kw motor) with clutch / brake,<br> - max. thickness of the top plate 2.5 mm,<br> - min. thickness of the top plate 0.4 mm,<br> - tolerance to the length mm. +/- 0.25,<br> - weight 3000 kg, dimensions 4000 x 2500 x 2600 mm,<br> <br> overall dimensions of the complete system 8920 x 2500 x 2600 mm,<br> - electrical control cabinet contains all electrical and electronic control devices, including cnc control <br> <br> <i>please look to the information in pdf format, a video is also available!<br></i> WEIGHT APPROX.: 8000 KG
COIL WEIGHT: MAX. 7000 KG
COIL INTERNAL DIAMETER: 500/600 MM
COIL EXTERNAL DIAMETER: 1400 MM
STRIP WIDTH: 1500 MM
DIMENSIONS (L X W X H) APPROX.: 8922 X 2500 X 2600 MM
DESCRIPTION:

THE LONGITUDINAL AND TRANSVERSE SLITTING LINE CONSISTS OF:


SWIFT DECOILER PSM 15 GRANDINI,
- MAX. WIDTH OF THE COIL 1,500 MM MAX. CAPACITY 10,000 KG,
- MAX. COIL DIAMETER 1,400 MM,
- SHEET THICKNESS 0.4 TO 2.5 MM,
- ELECTROHYDRAULIC DRIVE CHUCK,
- PNEUMATICALLY CONTROLLED SLIDING ROLLERS,
- HYDRAULIC EXTENSION OF THE MANDREL 470-520 MM,
- MAX. RUNNING SPEED 30 M/MIN,
- WEIGHT 3200 KG, DIMENSIONS 1230 X 2500 X 1870 MM
ARTICULATED PLANE PNSU 15:
- DIMENSIONS 3565 X 2500 X 1250 MM
SHEARING LINE LTCB 7415 TT GRANDINI STRAIGHTENING AND CUTTING MACHINE (COMPACT LINE)
- 1550 X 2.5 MM,
- 2 PULL ROLLS WITH DIAMETER 120 MM, PNEUMATICALLY DRIVEN,
- 7 ROLLS MADE OF HIGH QUALITY CHROME STEEL, CHROME PLATED, DIAM. 120 MM - FOR STRAIGHTENING,
- LENGTH MEASURING SYSTEM 0 -100 MM,
- ELECTRICALLY PNEUMATICALLY DRIVEN GUILLOTINE (4 KW MOTOR) WITH CLUTCH / BRAKE,
- MAX. THICKNESS OF THE TOP PLATE 2.5 MM,
- MIN. THICKNESS OF THE TOP PLATE 0.4 MM,
- TOLERANCE TO THE LENGTH MM. +/- 0.25,
- WEIGHT 3000 KG, DIMENSIONS 4000 X 2500 X 2600 MM,

OVERALL DIMENSIONS OF THE COMPLETE SYSTEM 8920 X 2500 X 2600 MM,
- ELECTRICAL CONTROL CABINET CONTAINS ALL ELECTRICAL AND ELECTRONIC CONTROL DEVICES, INCLUDING CNC CONTROL

PLEASE LOOK TO THE INFORMATION IN PDF FORMAT, A VIDEO IS ALSO AVAILABLE!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-swing over bed 1250 mm
max turning lenght 8000 mm
center height 625 mm
spindle speed 250 rpm SWING OVER BED 1250 MM MAX TURNING LENGHT 8000 MM CENTER HEIGHT 625 MM SPINDLE SPEED 250 RPM
Vendedor: Pyramid Mühendislik
Año de construcción: usado
Precio: used machinery auction RESALE 250 €
Ubicación: Land-weight approx.: 15 kg<br/>dimensions (l x w x h) approx.: 350 x 350 x 300 mm<br/>description: max force 20 kn<br> see photos WEIGHT APPROX.: 15 KG
DIMENSIONS (L X W X H) APPROX.: 350 X 350 X 300 MM
DESCRIPTION: MAX FORCE 20 KN
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 35.000 €
Ubicación: Land-tip height: approx. 650 mm, turning length: 6000 mm, m. four back lining, diameter: 630 mm, fabr. bison, get spindle diameter: approx. 150 mm, coolant system, engine light, digital display, battery-rite, hardened guideways, main drive: 30 kw, total speed range: 5-1000 rpm, continuous quick change tool holder, rear splash guard chip, central lubrication system for bed sleigh and facing slide, central lubrication system for headstock and feed, feeds metric and inch threads without changing the wheel, electr. adjustable tailstock, support for control and spindle TIP HEIGHT: APPROX. 650 MM, TURNING LENGTH: 6000 MM, M. FOUR BACK LINING, DIAMETER: 630 MM, FABR. BISON, GET SPINDLE DIAMETER: APPROX. 150 MM, COOLANT SYSTEM, ENGINE LIGHT, DIGITAL DISPLAY, BATTERY-RITE, HARDENED GUIDEWAYS, MAIN DRIVE: 30 KW, TOTAL SPEED RANGE: 5-1000 RPM, CONTINUOUS QUICK CHANGE TOOL HOLDER, REAR SPLASH GUARD CHIP, CENTRAL LUBRICATION SYSTEM FOR BED SLEIGH AND FACING SLIDE, CENTRAL LUBRICATION SYSTEM FOR HEADSTOCK AND FEED, FEEDS METRIC AND INCH THREADS WITHOUT CHANGING THE WHEEL, ELECTR. ADJUSTABLE TAILSTOCK, SUPPORT FOR CONTROL AND SPINDLE
Vendedor: Indutax GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 150 €
Ubicación: Land-weight approx.: 10 kg<br/>dimensions (l x w x h) approx.: 300 x 300 x 300 mm<br/>description: serial number 587<br> max tractive force 60 kn<br> max thrust force 60 kn<br> max rotational speed 8000 rpm<br> see photos WEIGHT APPROX.: 10 KG
DIMENSIONS (L X W X H) APPROX.: 300 X 300 X 300 MM
DESCRIPTION: SERIAL NUMBER 587
MAX TRACTIVE FORCE 60 KN
MAX THRUST FORCE 60 KN
MAX ROTATIONAL SPEED 8000 RPM
SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 35.000 €
Ubicación: Land-turning diameter 1000 mm
turning length 4000 mm
speed 25-315
tailstock
bezel/insert stock
reconditioned

changes and errors in the technical data and information and subject to prior sale!
 TURNING DIAMETER 1000 MM TURNING LENGTH 4000 MM SPEED 25-315 TAILSTOCK BEZEL/INSERT STOCK RECONDITIONED CHANGES AND ERRORS IN THE TECHNICAL DATA AND INFORMATION AND SUBJECT TO PRIOR SALE!
Vendedor: EN-Tec GmbH
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Precio: 11.750 €
Ubicación: Land-stephan mc10/2 microcut, emulsifyers, colloid mill, koialmã¼hle, inotec

voltage: 400v
protection: 20a
power: 5500/7500w
speed: 1450/2900/min
with circulation system and 90 litres hopper
equipped with 0, 9 mm cutting ring
machine comes from the kitchen of a hotel and was only very rarely in use when the new chef in the last 5 years
you is in very good condition, still should be cleaned thoroughly before use

video about test run and more pictures available STEPHAN MC10/2 MICROCUT, EMULSIFYERS, COLLOID MILL, KOIALM&ATILDE;&FRAC14;HLE, INOTEC VOLTAGE: 400V PROTECTION: 20A POWER: 5500/7500W SPEED: 1450/2900/MIN WITH CIRCULATION SYSTEM AND 90 LITRES HOPPER EQUIPPED WITH 0, 9 MM CUTTING RING MACHINE COMES FROM THE KITCHEN OF A HOTEL AND WAS ONLY VERY RARELY IN USE WHEN THE NEW CHEF IN THE LAST 5 YEARS YOU IS IN VERY GOOD CONDITION, STILL SHOULD BE CLEANED THOROUGHLY BEFORE USE VIDEO ABOUT TEST RUN AND MORE PICTURES AVAILABLE
Vendedor: Statt Nahrungsmittelmaschinen
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-swing over bed: 4330 mm
swing over saddle: 3200 mm
between centres: 15,000 mm
width across bed: 4267 mm
traverse of top slide: 890 mm
maximum load between centres (unsupported): 135 tons
headstock faceplate dia: 3353mm
tailstock faceplate diameter: 2438 mm
speeds: 0-38 rpm
tool section: 76 x 65 mm
drive motor: 250 hp
total weight:approx 300 tons SWING OVER BED: 4330 MM SWING OVER SADDLE: 3200 MM BETWEEN CENTRES: 15,000 MM WIDTH ACROSS BED: 4267 MM TRAVERSE OF TOP SLIDE: 890 MM MAXIMUM LOAD BETWEEN CENTRES (UNSUPPORTED): 135 TONS HEADSTOCK FACEPLATE DIA: 3353MM TAILSTOCK FACEPLATE DIAMETER: 2438 MM SPEEDS: 0-38 RPM TOOL SECTION: 76 X 65 MM DRIVE MOTOR: 250 HP TOTAL WEIGHT:APPROX 300 TONS
Vendedor: OPEX MACHINERY PTE LTD
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-
Vendedor: HORST WOLFF Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-please visit our website at foeth[dot]com for more information about this machine. what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! PLEASE VISIT OUR WEBSITE AT FOETH[DOT]COM FOR MORE INFORMATION ABOUT THIS MACHINE. WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-procedures:
[x x y x z] 1000 x 1050 x 600 mm
 
number of axles: 5 control: roeder's spindle retainer: hsk 63 f spindle speed: 30000 rpm
tool changers: 30 - fold
rotary swivel table: 625 mm PROCEDURES: [X X Y X Z] 1000 X 1050 X 600 MM NUMBER OF AXLES: 5 CONTROL: ROEDER'S SPINDLE RETAINER: HSK 63 F SPINDLE SPEED: 30000 RPM TOOL CHANGERS: 30 - FOLD ROTARY SWIVEL TABLE: 625 MM
Vendedor: Mac-Tec
Año de construcción: usado
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 7000 x 1400 x 2900 mm<br/>description: load capacity 3000 kg<br> machine no.: 5325.12<br> weight of the traverse 1600 kg<br> cross beam length 6700 mm, with 26 welding hooks<br> maximum workpiece dimensions diameter 600 x 14000 mm<br> rotary actuator fa 107/g r77 dt80k4/bmg<br> turning 1.0 1/min<br> turning range endless<br> operating voltage 400 v 50 hz<br> control voltage 230 v<br> connection power 0.55 kw<br> <br> including storage rack<br> dimension 4360 x 1400 mm<br> storage height 1220 mm<br> weight approx. 400 kg<br> <br> <b>very low operating hours</b> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 1400 X 2900 MM
DESCRIPTION: LOAD CAPACITY 3000 KG
MACHINE NO.: 5325.12
WEIGHT OF THE TRAVERSE 1600 KG
CROSS BEAM LENGTH 6700 MM, WITH 26 WELDING HOOKS
MAXIMUM WORKPIECE DIMENSIONS DIAMETER 600 X 14000 MM
ROTARY ACTUATOR FA 107/G R77 DT80K4/BMG
TURNING 1.0 1/MIN
TURNING RANGE ENDLESS
OPERATING VOLTAGE 400 V 50 HZ
CONTROL VOLTAGE 230 V
CONNECTION POWER 0.55 KW

INCLUDING STORAGE RACK
DIMENSION 4360 X 1400 MM
STORAGE HEIGHT 1220 MM
WEIGHT APPROX. 400 KG

VERY LOW OPERATING HOURS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-year of construction: 2001
swing over bed: 810 mm
swing over cross slide plan: 540 mm
displacement of the plan slide: 400 mm
bed width: 480 mm
turning tool cross section: 32 x 25 mm
spindle head: gr. 11
spindle bore: 130 mm
high - lathe for chuck and shaft machining with digital drive and plus m, or with digital drives and cycle control siemens manual turn

more info on request
machine is in good condition! YEAR OF CONSTRUCTION: 2001 SWING OVER BED: 810 MM SWING OVER CROSS SLIDE PLAN: 540 MM DISPLACEMENT OF THE PLAN SLIDE: 400 MM BED WIDTH: 480 MM TURNING TOOL CROSS SECTION: 32 X 25 MM SPINDLE HEAD: GR. 11 SPINDLE BORE: 130 MM HIGH - LATHE FOR CHUCK AND SHAFT MACHINING WITH DIGITAL DRIVE AND PLUS M, OR WITH DIGITAL DRIVES AND CYCLE CONTROL SIEMENS MANUAL TURN MORE INFO ON REQUEST MACHINE IS IN GOOD CONDITION!
Vendedor: Maschinenhandel Kmet
Año de construcción: usado
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 7000 x 1400 x 2900 mm<br/>description: load capacity 3000 kg<br> machine no.: 5325.14 weight of the traverse 1600 kg<br> cross beam length 6700 mm, with 26 welding hooks<br> maximum workpiece dimensions diameter 600 x 14000 mm<br> rotary actuator fa 107/g r77 dt80k4/bmg<br> turning 1.0 1/min<br> turning range endless<br> operating voltage 400 v 50 hz<br> control voltage 230 v<br> connection power 0.55 kw<br> <br> including storage rack<br> dimension 4360 x 1400 mm<br> storage height 1220 mm<br> weight approx. 400 kg<br> <br> <b>only very few operating hours</b> WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 1400 X 2900 MM
DESCRIPTION: LOAD CAPACITY 3000 KG
MACHINE NO.: 5325.14 WEIGHT OF THE TRAVERSE 1600 KG
CROSS BEAM LENGTH 6700 MM, WITH 26 WELDING HOOKS
MAXIMUM WORKPIECE DIMENSIONS DIAMETER 600 X 14000 MM
ROTARY ACTUATOR FA 107/G R77 DT80K4/BMG
TURNING 1.0 1/MIN
TURNING RANGE ENDLESS
OPERATING VOLTAGE 400 V 50 HZ
CONTROL VOLTAGE 230 V
CONNECTION POWER 0.55 KW

INCLUDING STORAGE RACK
DIMENSION 4360 X 1400 MM
STORAGE HEIGHT 1220 MM
WEIGHT APPROX. 400 KG

ONLY VERY FEW OPERATING HOURS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-one used bruderer bsta 60hl high speed press,
**machine under refurbishment.**
 original year of mfg 1977. swiss origin.
 60 tons capacity, underdrive type.
 adjustable stroke 20 to 76 mm.
 speed range 100 to 750 strokes per minute max.
 bolster area 770 mm x 620 mm
 roll feed bbv 202/120 fitted on left-hand side.
 max width of strip 200 mm.
 electric supply 380 volts, 50 cycles.
 weight of press approx. 8000 kgs.

 
 ONE USED BRUDERER BSTA 60HL HIGH SPEED PRESS, **MACHINE UNDER REFURBISHMENT.** ORIGINAL YEAR OF MFG 1977. SWISS ORIGIN. 60 TONS CAPACITY, UNDERDRIVE TYPE. ADJUSTABLE STROKE 20 TO 76 MM. SPEED RANGE 100 TO 750 STROKES PER MINUTE MAX. BOLSTER AREA 770 MM X 620 MM ROLL FEED BBV 202/120 FITTED ON LEFT-HAND SIDE. MAX WIDTH OF STRIP 200 MM. ELECTRIC SUPPLY 380 VOLTS, 50 CYCLES. WEIGHT OF PRESS APPROX. 8000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 7000 x 1400 x 2900 mm<br/>description: load capacity 3000 kg<br> machine no.: 5325.16<br> weight of the traverse 2100 kg<br> cross beam length 6700 mm, with 26 welding hooks<br> maximum workpiece dimensions diameter 600 x 14000 mm<br> rotary actuator fa 107/g r77 dt80k4/bmg<br> turning 1.0 1/min<br> turning range endless<br> operating voltage 400 v 50 hz<br> control voltage 230 v<br> connection power 0.55 kw<br> <br> including storage rack<br> dimension 4360 x 1400 mm<br> storage height 1220 mm<br> weight approx. 400 kg<br> <br> <b>only very few operating hours</b> WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 7000 X 1400 X 2900 MM
DESCRIPTION: LOAD CAPACITY 3000 KG
MACHINE NO.: 5325.16
WEIGHT OF THE TRAVERSE 2100 KG
CROSS BEAM LENGTH 6700 MM, WITH 26 WELDING HOOKS
MAXIMUM WORKPIECE DIMENSIONS DIAMETER 600 X 14000 MM
ROTARY ACTUATOR FA 107/G R77 DT80K4/BMG
TURNING 1.0 1/MIN
TURNING RANGE ENDLESS
OPERATING VOLTAGE 400 V 50 HZ
CONTROL VOLTAGE 230 V
CONNECTION POWER 0.55 KW

INCLUDING STORAGE RACK
DIMENSION 4360 X 1400 MM
STORAGE HEIGHT 1220 MM
WEIGHT APPROX. 400 KG

ONLY VERY FEW OPERATING HOURS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 359 €
Ubicación: Land-wide clamping shelving garage shelves shelf

data:
-h: 300 cm
-t: 60 cm
-l: approx. 5 yds

-offer
-used - good condition
-connect system is bright zinc-plated

shelf 5 meters comprising:
-stand 04 x 300 x 60 cm.
-trusses 30 x 165 x 7,5 cm.
-15 x 16 mm chipboard, natural floor.

-load: 230 kg load capacity, evenly distributed loads.
-levels: 5 x storage levels.
-stand, traverses in galvanized.

-multiple available!

price:
â?¬359 net
â?¬427,21 gross
you will receive an invoice with expelled vat

our recommendation:
tell us your requirements...
we assist you with the realisation of your projects, from planning to the order to assembly. WIDE CLAMPING SHELVING GARAGE SHELVES SHELF DATA: -H: 300 CM -T: 60 CM -L: APPROX. 5 YDS -OFFER -USED - GOOD CONDITION -CONNECT SYSTEM IS BRIGHT ZINC-PLATED SHELF 5 METERS COMPRISING: -STAND 04 X 300 X 60 CM. -TRUSSES 30 X 165 X 7,5 CM. -15 X 16 MM CHIPBOARD, NATURAL FLOOR. -LOAD: 230 KG LOAD CAPACITY, EVENLY DISTRIBUTED LOADS. -LEVELS: 5 X STORAGE LEVELS. -STAND, TRAVERSES IN GALVANIZED. -MULTIPLE AVAILABLE! PRICE: &ACIRC;?&NOT;359 NET &ACIRC;?&NOT;427,21 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT OUR RECOMMENDATION: TELL US YOUR REQUIREMENTS... WE ASSIST YOU WITH THE REALISATION OF YOUR PROJECTS, FROM PLANNING TO THE ORDER TO ASSEMBLY.
Vendedor: BLT Lagertechnik
Año de construcción: usado
Precio: used machinery auction RESALE 60.000 €
Ubicación: Land-weight approx.: 37000 kg<br/>dimensions (l x w x h) approx.: 50000 x 7500 x 2600 mm<br/>description: used for the production of scaffolding / mezzanine tables measuring 500 mm type aes , variable length, with patented system of clinching<br> usable working width profiling about 1000 mm<br> line composed of:<br> - unwinding reel with loading cot brand grandini model psp 10 year 2001, useful arm length about 1050 mm, equipped with upper premirotolo<br> - piemme brand feeder, year 2006, useful working width about 1100 mm equipped with in-line welding system for sheet metal tapes<br> - inlet profiling press machine<br> - profiling machine 20 + 15 steps, total 35 steps - cutting shears about 11 kw - island of clinching and assembly of aes brand with stacking robot brand kuka model kr 125/3 year 2002 control vkr c2<br> - <b>electrical system to be re-wired <,/ b>,</b> WEIGHT APPROX.: 37000 KG
DIMENSIONS (L X W X H) APPROX.: 50000 X 7500 X 2600 MM
DESCRIPTION: USED FOR THE PRODUCTION OF SCAFFOLDING / MEZZANINE TABLES MEASURING 500 MM TYPE AES , VARIABLE LENGTH, WITH PATENTED SYSTEM OF CLINCHING
USABLE WORKING WIDTH PROFILING ABOUT 1000 MM
LINE COMPOSED OF:
- UNWINDING REEL WITH LOADING COT BRAND GRANDINI MODEL PSP 10 YEAR 2001, USEFUL ARM LENGTH ABOUT 1050 MM, EQUIPPED WITH UPPER PREMIROTOLO
- PIEMME BRAND FEEDER, YEAR 2006, USEFUL WORKING WIDTH ABOUT 1100 MM EQUIPPED WITH IN-LINE WELDING SYSTEM FOR SHEET METAL TAPES
- INLET PROFILING PRESS MACHINE
- PROFILING MACHINE 20 + 15 STEPS, TOTAL 35 STEPS - CUTTING SHEARS ABOUT 11 KW - ISLAND OF CLINCHING AND ASSEMBLY OF AES BRAND WITH STACKING ROBOT BRAND KUKA MODEL KR 125/3 YEAR 2002 CONTROL VKR C2
- ELECTRICAL SYSTEM TO BE RE-WIRED <,/ B>,
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-high speed press:

producer: mabu
stroke power 500 kn (50 tons)
year 09/98 / beckhoff control 2017
machine in mint condition with new beckhoff control
made in germany

stroke adjustment (hub): 7-60 mm

strokes per minute 80-500 spm

four pillar

table dimension is 740 x 565 mm.

side passage width 330 mm.

including two servo feeders:
zehnder & sommer ev 12 ak (2 stk.)

including two soprem decoiler and recoiler


weight cca. 4 ton
motor 5.5 kw
on stock more high speed presses bruderer.
 HIGH SPEED PRESS: PRODUCER: MABU STROKE POWER 500 KN (50 TONS) YEAR 09/98 / BECKHOFF CONTROL 2017 MACHINE IN MINT CONDITION WITH NEW BECKHOFF CONTROL MADE IN GERMANY STROKE ADJUSTMENT (HUB): 7-60 MM STROKES PER MINUTE 80-500 SPM FOUR PILLAR TABLE DIMENSION IS 740 X 565 MM. SIDE PASSAGE WIDTH 330 MM. INCLUDING TWO SERVO FEEDERS: ZEHNDER & SOMMER EV 12 AK (2 STK.) INCLUDING TWO SOPREM DECOILER AND RECOILER WEIGHT CCA. 4 TON MOTOR 5.5 KW ON STOCK MORE HIGH SPEED PRESSES BRUDERER.
Vendedor: Silicon plus
Año de construcción: usado
Precio: 1.250 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Precio: 32.000 €
Ubicación: Land-type: haulick & roos rv80
capacity: 80 tons
spm: 65 to 400
stroke adjustment: 10 - 80
table size: 600 x 635 mm
year of construction: 1974

servo feeder:
alba wuppertal vhy300 / 0.1
max. bandwidth: 300mm
max. band thickness: 3.0mm
incl. greasing device and reservoir
year of construction: 09/1983

straightening machine:
dreher / dimeco-besancon
working width: 300mm

decoiler:
dreher / dimeco-besancon
type: 2350dm
model: 531
year of construction: 09/1978

weight cca 12.400 kg
beside this press we have plenty of bruderer bsta high speed presses. TYPE: HAULICK & ROOS RV80 CAPACITY: 80 TONS SPM: 65 TO 400 STROKE ADJUSTMENT: 10 - 80 TABLE SIZE: 600 X 635 MM YEAR OF CONSTRUCTION: 1974 SERVO FEEDER: ALBA WUPPERTAL VHY300 / 0.1 MAX. BANDWIDTH: 300MM MAX. BAND THICKNESS: 3.0MM INCL. GREASING DEVICE AND RESERVOIR YEAR OF CONSTRUCTION: 09/1983 STRAIGHTENING MACHINE: DREHER / DIMECO-BESANCON WORKING WIDTH: 300MM DECOILER: DREHER / DIMECO-BESANCON TYPE: 2350DM MODEL: 531 YEAR OF CONSTRUCTION: 09/1978 WEIGHT CCA 12.400 KG BESIDE THIS PRESS WE HAVE PLENTY OF BRUDERER BSTA HIGH SPEED PRESSES.
Vendedor: Silicon plus
Año de construcción: usado
Precio: 40 €
Ubicación: Land-de Germany, 26215 Wiefelstede
Vendedor: Theodor Eberlei GmbH & Co.KG
Año de construcción: usado
Ubicación: Land-swift heavy duty lathe
----------------------

swing over bed: 1100 mm
swing over cross-slide: 846 mm
between centres: 6900 mm
width across bed: 760 mm
spindle hole: 156 mm
spindle speeds: 3-300 rpm
quill: 127 mm
4-jaw chuck: 910 mm
3-point steady: 470 mm SWIFT HEAVY DUTY LATHE ---------------------- SWING OVER BED: 1100 MM SWING OVER CROSS-SLIDE: 846 MM BETWEEN CENTRES: 6900 MM WIDTH ACROSS BED: 760 MM SPINDLE HOLE: 156 MM SPINDLE SPEEDS: 3-300 RPM QUILL: 127 MM 4-JAW CHUCK: 910 MM 3-POINT STEADY: 470 MM
Vendedor: OPEX MACHINERY PTE LTD
Año de construcción: usado
Ubicación: Land-sr  65064 --foto-elektrisch meetsysteem in x,y en zvv hogesnelheidsfreeskop tot 24 000 rpm (laatste foto) i-bag ms1 x hoogfrekwentiegenerator type 9533-24 3 x 380 v1 x gelijkstroom modulator  type fcc1 x werkunit type 45 kw ab1 x verpulver-aggregaat2 x klemgereedsschap ski 2515 gereedschappen (2-tandig)1  meeneemschijfsystème de mesure photo-électique sur x,y et zpourvue dune broche à grande vitesse jusqua 24 000 u/min (dernier photo)1 x générateur de haute fréquence type 9533-24 3 380 v1 x freinage courant continue type fcc1 x unité de service type 45 kw ab1 x agrégat de pulvérisation2 x tassaux portepince ski 2515 outils à 2 dents1 flasque daccouplement SR 65064 --FOTO-ELEKTRISCH MEETSYSTEEM IN X,Y EN ZVV HOGESNELHEIDSFREESKOP TOT 24 000 RPM (LAATSTE FOTO) I-BAG MS1 X HOOGFREKWENTIEGENERATOR TYPE 9533-24 3 X 380 V1 X GELIJKSTROOM MODULATOR TYPE FCC1 X WERKUNIT TYPE 45 KW AB1 X VERPULVER-AGGREGAAT2 X KLEMGEREEDSSCHAP SKI 2515 GEREEDSCHAPPEN (2-TANDIG)1 MEENEEMSCHIJFSYSTèME DE MESURE PHOTO-éLECTIQUE SUR X,Y ET ZPOURVUE DUNE BROCHE à GRANDE VITESSE JUSQUA 24 000 U/MIN (DERNIER PHOTO)1 X GéNéRATEUR DE HAUTE FRéQUENCE TYPE 9533-24 3 380 V1 X FREINAGE COURANT CONTINUE TYPE FCC1 X UNITé DE SERVICE TYPE 45 KW AB1 X AGRéGAT DE PULVéRISATION2 X TASSAUX PORTEPINCE SKI 2515 OUTILS à 2 DENTS1 FLASQUE DACCOUPLEMENT
Vendedor: APT International
Año de construcción: usado
Precio: 3.000 €
Ubicación: Land-combi steamers / oven unox cheftop 2 x
2 ovens with 7 and 5 drawers 1/1gn, mobile
various baking, steam cooking method with lan and usb interfaces,.
new board in the lower oven self cleaning
dimensions lxwxh approx. 76x80x185cm, weight approx. 145kg,.
good condition, works perfectly
 COMBI STEAMERS / OVEN UNOX CHEFTOP 2 X 2 OVENS WITH 7 AND 5 DRAWERS 1/1GN, MOBILE VARIOUS BAKING, STEAM COOKING METHOD WITH LAN AND USB INTERFACES,. NEW BOARD IN THE LOWER OVEN SELF CLEANING DIMENSIONS LXWXH APPROX. 76X80X185CM, WEIGHT APPROX. 145KG,. GOOD CONDITION, WORKS PERFECTLY
Vendedor: Lebensmitteltechnik Mayer
Año de construcción: usado
Precio: 220 €
Ubicación: Land-trading and manufacturing company bgi polska sp. z o.o., based  in lesna (poland, lowersilesia near to jelenia gora) is offering you for sale:

convection oven caterchef made of stainless steel. enamelled chamber.
perfect for casseroles, bread baking, etc.
manual control.
maximum load 4 plates with dimensions of 43x33 cm.
temperature controlling up to 300 c.
baking time from 0 to 120 minutes.
air convection ensured by 2 ventilators.
complete with 4 grills.
gross price - 220 euro

we would like to invite you to participate in our auctions, please click abc://bgipolska.comarch-esklep.pl/
in case of any questions, do not hesitate to contact us.

sales department:
tomasz  (english)  - tel. +48 500 393 610, email: tomasz.klimczak@bgipolska.pl
rafal   (english/german) - tel. +48 500 393 620, email: rafal.ilis@bgipolska.pl
kornel  (polish) -  tel. +48 500 393 616, email: kornel.potocki@bgipolska.pl
 TRADING AND MANUFACTURING COMPANY BGI POLSKA SP. Z O.O., BASED IN LESNA (POLAND, LOWERSILESIA NEAR TO JELENIA GORA) IS OFFERING YOU FOR SALE: CONVECTION OVEN CATERCHEF MADE OF STAINLESS STEEL. ENAMELLED CHAMBER. PERFECT FOR CASSEROLES, BREAD BAKING, ETC. MANUAL CONTROL. MAXIMUM LOAD 4 PLATES WITH DIMENSIONS OF 43X33 CM. TEMPERATURE CONTROLLING UP TO 300 C. BAKING TIME FROM 0 TO 120 MINUTES. AIR CONVECTION ENSURED BY 2 VENTILATORS. COMPLETE WITH 4 GRILLS. GROSS PRICE - 220 EURO WE WOULD LIKE TO INVITE YOU TO PARTICIPATE IN OUR AUCTIONS, PLEASE CLICK ABC://BGIPOLSKA.COMARCH-ESKLEP.PL/ IN CASE OF ANY QUESTIONS, DO NOT HESITATE TO CONTACT US. SALES DEPARTMENT: TOMASZ (ENGLISH) - TEL. +48 500 393 610, EMAIL: TOMASZ.KLIMCZAK@BGIPOLSKA.PL RAFAL (ENGLISH/GERMAN) - TEL. +48 500 393 620, EMAIL: RAFAL.ILIS@BGIPOLSKA.PL KORNEL (POLISH) - TEL. +48 500 393 616, EMAIL: KORNEL.POTOCKI@BGIPOLSKA.PL
Vendedor: BGI Polska sp. z o.o.
Año de construcción: usado
Ubicación: Land-the largest diameter of a product processed over:
bed, in mm                                            2 500
support, in mm                                        2 000
the smallest diameter of the processed product, mm    500
distance between centers, mm                          12 500
the largest weight of the processed product, kg       100 000
frequency of rotation of a spindle, rpm               0,8-50
cutting of a carving:
metric, mm                                            2-96
inch (threads on 1 THE LARGEST DIAMETER OF A PRODUCT PROCESSED OVER: BED, IN MM 2 500 SUPPORT, IN MM 2 000 THE SMALLEST DIAMETER OF THE PROCESSED PRODUCT, MM 500 DISTANCE BETWEEN CENTERS, MM 12 500 THE LARGEST WEIGHT OF THE PROCESSED PRODUCT, KG 100 000 FREQUENCY OF ROTATION OF A SPINDLE, RPM 0,8-50 CUTTING OF A CARVING: METRIC, MM 2-96 INCH (THREADS ON 1") 20-3/8 ANGLE OF ROTATION OF THE TOP PART OF A SUPPORT, HAIL 90 SPEED OF THE ACCELERATED PROMOTION PINTLES, MM/MIN. 310 THE ACCELERATED MOVEMENT OF THE BACK GRANDMA, M/MIN. 2,9 THE ACCELERATED MOVEMENT OF A SUPPORT, M/MIN 3,1 LONGITUDINAL GIVING OF A SUPPORT, MM / ABOUT 0,159-49,6 RELATION OF LONGITUDINAL GIVING TO CROSS 2,5 POWER OF THE ELECTRIC MOTOR OF THE MAIN DRIVE, KW 125 DIMENSIONS OF THE MACHINE, MM: LENGTH 20900 WIDTH 4350 HEIGHT 3280 MASS OF THE MACHINE, KG 162500 INCL. 2 LUNETTES NEW APPROX. 1988
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: 25.000 €
Ubicación: Land-offered here is a heavy lathe of wmw niles dlz manufacturer 1000 iii
a lynette, 600 three-jaw chuck, multi fix steel holder with inserts, as well as the documentation are included in the scope of delivery.
the machine is in good condition and can be seen like in our warehouse in hagen and tested

technical data:
manufacturer: wmw niles
type: dlz 1000 iii

swing over bed: 1000 mm
swing into the recess: 1120 mm
swing over bed slide: 690 mm
turning length: 5000 mm
three jaw chuck diameter: 600 mm
spindle bore: 90 mm
spindle speed: maximum 560 rpm

: weight 14400
leasing/financing available. please enquire.

price excl. vat
free loading truck
for more information see also pictures or manufacturer's website.
sales invoice. the vat is shown separately on the invoice
visit any time by appointment only possible and desirable.
it used no guarantee or warranty.
delivery possible. please enquire
errors and omissions as well as subject to prior sale. OFFERED HERE IS A HEAVY LATHE OF WMW NILES DLZ MANUFACTURER 1000 III A LYNETTE, 600 THREE-JAW CHUCK, MULTI FIX STEEL HOLDER WITH INSERTS, AS WELL AS THE DOCUMENTATION ARE INCLUDED IN THE SCOPE OF DELIVERY. THE MACHINE IS IN GOOD CONDITION AND CAN BE SEEN LIKE IN OUR WAREHOUSE IN HAGEN AND TESTED TECHNICAL DATA: MANUFACTURER: WMW NILES TYPE: DLZ 1000 III SWING OVER BED: 1000 MM SWING INTO THE RECESS: 1120 MM SWING OVER BED SLIDE: 690 MM TURNING LENGTH: 5000 MM THREE JAW CHUCK DIAMETER: 600 MM SPINDLE BORE: 90 MM SPINDLE SPEED: MAXIMUM 560 RPM : WEIGHT 14400 LEASING/FINANCING AVAILABLE. PLEASE ENQUIRE. PRICE EXCL. VAT FREE LOADING TRUCK FOR MORE INFORMATION SEE ALSO PICTURES OR MANUFACTURER'S WEBSITE. SALES INVOICE. THE VAT IS SHOWN SEPARATELY ON THE INVOICE VISIT ANY TIME BY APPOINTMENT ONLY POSSIBLE AND DESIRABLE. IT USED NO GUARANTEE OR WARRANTY. DELIVERY POSSIBLE. PLEASE ENQUIRE ERRORS AND OMISSIONS AS WELL AS SUBJECT TO PRIOR SALE.
Vendedor: TechnoMac - Maschinen, Roboter, Automatisierung
Año de construcción: usado
Ubicación: Land-
harvey heavy duty lathe
-----------------------

between centres:                                   6700 mm
swing over bed:                                    1370 mm
swing over cross-slide:                            1117 mm
width of bed:                                      1220 mm
chuck diameter:                                    1524 mm x 330 mm
weight:                                            35,000 kg

complete except for electrics
head-stock gears - excellent
needs some work HARVEY HEAVY DUTY LATHE ----------------------- BETWEEN CENTRES: 6700 MM SWING OVER BED: 1370 MM SWING OVER CROSS-SLIDE: 1117 MM WIDTH OF BED: 1220 MM CHUCK DIAMETER: 1524 MM X 330 MM WEIGHT: 35,000 KG COMPLETE EXCEPT FOR ELECTRICS HEAD-STOCK GEARS - EXCELLENT NEEDS SOME WORK
Vendedor: OPEX MACHINERY PTE LTD
Año de construcción: usado
Ubicación: Land-craven heavy duty roll lathe
----------------------------
maximum swing over bed: 1800 mm
maximum swing over saddle: 1680 mm
between centres: 9000 mm
maximum work-piece weight (held between 2 chucks): 70 tons
4-jaw chuck diameter: 1500 mm
spindle speeds: 0.5-30 rpm
width across bed: 2500 mm
drive motor: 150 kw
weight of machine: 155 tons

condition: excellent. under power.
location: bangkok

 CRAVEN HEAVY DUTY ROLL LATHE ---------------------------- MAXIMUM SWING OVER BED: 1800 MM MAXIMUM SWING OVER SADDLE: 1680 MM BETWEEN CENTRES: 9000 MM MAXIMUM WORK-PIECE WEIGHT (HELD BETWEEN 2 CHUCKS): 70 TONS 4-JAW CHUCK DIAMETER: 1500 MM SPINDLE SPEEDS: 0.5-30 RPM WIDTH ACROSS BED: 2500 MM DRIVE MOTOR: 150 KW WEIGHT OF MACHINE: 155 TONS CONDITION: EXCELLENT. UNDER POWER. LOCATION: BANGKOK
Vendedor: OPEX MACHINERY PTE LTD
Año de construcción: usado
Ubicación: Land-specifications:
-max. swing over bed: 2300 mm,
-max. turning diameter over slide rest: 1900 mm,
-max.workpiece length: l=8000 mm,
-bed width (guide bed): 2190 mm,
-faceplate diameter (4-jaw chuck): 2 000 mm,
-max. workpiece weight between centers: max. 60 000 kg,
-spindle speed range: 0,45 - 90 r/min
-swiveling angle of tool post: ± 90º,
-feeds of the lathe: 0,18-5,6
-main motor: 60 kw,
-weight of machine: 36 400 kg,
-overall dimensions:
l = 14,5m,
b = 3,60m,
h = 2,95m 

equipment:
-faceplate 2000 mm diameter, 
-taper turning device: 1 pcs,
-self-centering rest: 1 pcs

modernization in 2008:
-repair of the machine's mechanical transmission, 
-exchange of the electric guidance,
-new electric cabinet,
-exchange of the installation of the lubrication,
-bed grinding and exchange of sliding elements,
-picking the working space up above the large bed and the saddle for 300 mm
 SPECIFICATIONS: -MAX. SWING OVER BED: 2300 MM, -MAX. TURNING DIAMETER OVER SLIDE REST: 1900 MM, -MAX.WORKPIECE LENGTH: L=8000 MM, -BED WIDTH (GUIDE BED): 2190 MM, -FACEPLATE DIAMETER (4-JAW CHUCK): 2 000 MM, -MAX. WORKPIECE WEIGHT BETWEEN CENTERS: MAX. 60 000 KG, -SPINDLE SPEED RANGE: 0,45 - 90 R/MIN -SWIVELING ANGLE OF TOOL POST: ± 90º, -FEEDS OF THE LATHE: 0,18-5,6 -MAIN MOTOR: 60 KW, -WEIGHT OF MACHINE: 36 400 KG, -OVERALL DIMENSIONS: L = 14,5M, B = 3,60M, H = 2,95M EQUIPMENT: -FACEPLATE 2000 MM DIAMETER, -TAPER TURNING DEVICE: 1 PCS, -SELF-CENTERING REST: 1 PCS MODERNIZATION IN 2008: -REPAIR OF THE MACHINE'S MECHANICAL TRANSMISSION, -EXCHANGE OF THE ELECTRIC GUIDANCE, -NEW ELECTRIC CABINET, -EXCHANGE OF THE INSTALLATION OF THE LUBRICATION, -BED GRINDING AND EXCHANGE OF SLIDING ELEMENTS, -PICKING THE WORKING SPACE UP ABOVE THE LARGE BED AND THE SADDLE FOR 300 MM
Vendedor: Machines4metal
Año de construcción: usado
Ubicación: Land-turning diameter over bed 2000 mm,
turning diameter over support 1600 mm,.
turning length 14,000 mm
1.8-180 rpm,
werstuckgewicht 40 ton,
3-pave bed, width 1800 mm

TURNING DIAMETER OVER BED 2000 MM, TURNING DIAMETER OVER SUPPORT 1600 MM,. TURNING LENGTH 14,000 MM 1.8-180 RPM, WERSTUCKGEWICHT 40 TON, 3-PAVE BED, WIDTH 1800 MM
Vendedor: INTERMACH BV
Año de construcción: usado
Ubicación: Land-top machine with super mass!
hand man ubz nt-g500/300 13
year of construction: 2003
5500 x-y-3200
z-1500
spindle: hsk100 at 10,000 rpm
               hsk 63 at 20,000 rpm
table length: 5000 x 3000 mm
control: fidia

machine is available on request!

see pictures! TOP MACHINE WITH SUPER MASS! HAND MAN UBZ NT-G500/300 13 YEAR OF CONSTRUCTION: 2003 5500 X-Y-3200 Z-1500 SPINDLE: HSK100 AT 10,000 RPM HSK 63 AT 20,000 RPM TABLE LENGTH: 5000 X 3000 MM CONTROL: FIDIA MACHINE IS AVAILABLE ON REQUEST! SEE PICTURES!
Vendedor: Khajavi-Tai Maschinenvermittlung
Año de construcción: usado
Precio: 90.000 €
Ubicación: Land-distance between centers: 6000mm.
swing: 1600mm.
swing over carriage: 1100mm.
swing over gap: 2000mm.
spindle: 140mm.
motor: 37kw.
motorized carriage and tailstock.
equipped with chuck of 1200mm and steady rest. DISTANCE BETWEEN CENTERS: 6000MM. SWING: 1600MM. SWING OVER CARRIAGE: 1100MM. SWING OVER GAP: 2000MM. SPINDLE: 140MM. MOTOR: 37KW. MOTORIZED CARRIAGE AND TAILSTOCK. EQUIPPED WITH CHUCK OF 1200MM AND STEADY REST.
Vendedor: Maquinaria Industrial Donosti Sl
Año de construcción: usado
Ubicación: Land-specifications / technical data:

bandwidth / strip width: 1500 mm
max band thickness / strip thickness max: 1.5 mm
transverse shear / cross shear: 2.0 mm
number of the straightening rollers / no. of straightening rolls: 6 pcs / no.
number of feed rollers / no. of feeding rolls: 2 pcs / no.
longitudinal shears cuts / longitudinal shear cuts: 3	
 SPECIFICATIONS / TECHNICAL DATA: BANDWIDTH / STRIP WIDTH: 1500 MM MAX BAND THICKNESS / STRIP THICKNESS MAX: 1.5 MM TRANSVERSE SHEAR / CROSS SHEAR: 2.0 MM NUMBER OF THE STRAIGHTENING ROLLERS / NO. OF STRAIGHTENING ROLLS: 6 PCS / NO. NUMBER OF FEED ROLLERS / NO. OF FEEDING ROLLS: 2 PCS / NO. LONGITUDINAL SHEARS CUTS / LONGITUDINAL SHEAR CUTS: 3
Vendedor: HEGO Blechverarbeitungsmaschinen GmbH
Año de construcción: usado
Ubicación: Land-diameter over bed 1320 mm
diameter over slide rest 950 mm
distance between centers 12.000 mm
workpiece weight 14 t
with of slides/bed 1100 mm
speed range (36) 1,12- 250 rpm
feeds 0,125 - 48 mm/min
1xroll steady (48t)
thread metric 1 - 200 mm
threading whitworth 24 – 0,125
threading dp ½
grinding device, max. dia 950 mm
milling device
 DIAMETER OVER BED 1320 MM DIAMETER OVER SLIDE REST 950 MM DISTANCE BETWEEN CENTERS 12.000 MM WORKPIECE WEIGHT 14 T WITH OF SLIDES/BED 1100 MM SPEED RANGE (36) 1,12- 250 RPM FEEDS 0,125 - 48 MM/MIN 1XROLL STEADY (48T) THREAD METRIC 1 - 200 MM THREADING WHITWORTH 24 – 0,125 THREADING DP ½ GRINDING DEVICE, MAX. DIA 950 MM MILLING DEVICE
Vendedor: MachTechnica Ltd.
Año de construcción: usado
Ubicación: Land-web width: 850 / 1320 mm
speed: 400 m / min
roll diameter / weight1000 mm / 1000 kg
for flexible packaging bopp, pet, pe, ldpe, grandpa, cast film, pp, al foil or paper 
 WEB WIDTH: 850 / 1320 MM SPEED: 400 M / MIN ROLL DIAMETER / WEIGHT1000 MM / 1000 KG FOR FLEXIBLE PACKAGING BOPP, PET, PE, LDPE, GRANDPA, CAST FILM, PP, AL FOIL OR PAPER
Vendedor: Grafimex GmbH
Año de construcción: usado
Precio: 21.000 €
Ubicación: Land-bruderer bsta 30

pressure 30 ton
up to 600 number of strokes/min feeder from left to right
table size: 545 x 470 mm
central lubrication
total power requirement: 5.5 kw
weight of the machine: 2.5t
 BRUDERER BSTA 30 PRESSURE 30 TON UP TO 600 NUMBER OF STROKES/MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2.5T
Vendedor: Mobilija.DOO
Año de construcción: usado
Precio: 5.950 €
Ubicación: Land-wide clamping shelving garage shelves shelf

data:
-h: 300 cm
-t: 60 cm
-l: 100.3 cm

-offer
-used - good condition
-connect system is bright zinc-plated

shelf 100,3 meters comprising:
-stand 60 x 300 x 60 cm.
-trusses 590 x 165 x 7,5 cm.
-295 x 16 mm chipboard, natural floor.
-load: 230 kg load capacity, evenly distributed loads.
-levels: 5 x storage levels.
-stand, traverses in galvanized.

-multiple available!

price:
â?¬5950 net
â?¬7080,50 gross
you will receive an invoice with expelled vat WIDE CLAMPING SHELVING GARAGE SHELVES SHELF DATA: -H: 300 CM -T: 60 CM -L: 100.3 CM -OFFER -USED - GOOD CONDITION -CONNECT SYSTEM IS BRIGHT ZINC-PLATED SHELF 100,3 METERS COMPRISING: -STAND 60 X 300 X 60 CM. -TRUSSES 590 X 165 X 7,5 CM. -295 X 16 MM CHIPBOARD, NATURAL FLOOR. -LOAD: 230 KG LOAD CAPACITY, EVENLY DISTRIBUTED LOADS. -LEVELS: 5 X STORAGE LEVELS. -STAND, TRAVERSES IN GALVANIZED. -MULTIPLE AVAILABLE! PRICE: &ACIRC;?&NOT;5950 NET &ACIRC;?&NOT;7080,50 GROSS YOU WILL RECEIVE AN INVOICE WITH EXPELLED VAT
Vendedor: BLT Lagertechnik
Año de construcción: usado
Ubicación: Land-we bring to your attention the machine railroad-wheel turning machine kz1836f3 with the cnc and drives of siemens, completeness full, excellent technical condition.
 
the machine has undergone in 2008 capital repairs and modernization, after that 
has been placed on preservation and it wasn't operated.

the extreme sizes of the established wheel couple, mm:     
diameters around drivings        
 - the greatest 1250 
 - the smallest 800 
 - axis length the greatest 2550 
 - axis length the smallest 2002 
 diameter of fastening of wheel couple:        
  - the greatest 1090 
  - the smallest 640 
 the largest mass of the processed wheel couples, kg 4000 
 width of a track, mm of 1520 
 parameter of roughness of the processed surface of wheel couple of ra, micron:  
  - cars 12,5 
 - locomotives 6,3 
speed of movement of shpindelny grandmas, mm/min. of 1500
corner of a cone of the center of shpindelny grandmas, hail. 60
indicators of accuracy of processing of bandages of wheel couple around swings, micron:    
 - radial beating 80
 - difference of diameters 100
time of processing of one wheel couple, mines 10-12
power of the drive of the main movement, kw 2?55
total power of the electric motors installed to kw on the machine 139,1
overall dimensions of the machine (together with separately located units gidro-and electric equipments, mm:      
 - length 7300
- width of 2700
 - height of 2700
machine n accuracy class
the mass of the machine (with separately located units gidro-and electric equipments), kg: 38500  WE BRING TO YOUR ATTENTION THE MACHINE RAILROAD-WHEEL TURNING MACHINE KZ1836F3 WITH THE CNC AND DRIVES OF SIEMENS, COMPLETENESS FULL, EXCELLENT TECHNICAL CONDITION. THE MACHINE HAS UNDERGONE IN 2008 CAPITAL REPAIRS AND MODERNIZATION, AFTER THAT HAS BEEN PLACED ON PRESERVATION AND IT WASN'T OPERATED. THE EXTREME SIZES OF THE ESTABLISHED WHEEL COUPLE, MM: DIAMETERS AROUND DRIVINGS - THE GREATEST 1250 - THE SMALLEST 800 - AXIS LENGTH THE GREATEST 2550 - AXIS LENGTH THE SMALLEST 2002 DIAMETER OF FASTENING OF WHEEL COUPLE: - THE GREATEST 1090 - THE SMALLEST 640 THE LARGEST MASS OF THE PROCESSED WHEEL COUPLES, KG 4000 WIDTH OF A TRACK, MM OF 1520 PARAMETER OF ROUGHNESS OF THE PROCESSED SURFACE OF WHEEL COUPLE OF RA, MICRON: - CARS 12,5 - LOCOMOTIVES 6,3 SPEED OF MOVEMENT OF SHPINDELNY GRANDMAS, MM/MIN. OF 1500 CORNER OF A CONE OF THE CENTER OF SHPINDELNY GRANDMAS, HAIL. 60 INDICATORS OF ACCURACY OF PROCESSING OF BANDAGES OF WHEEL COUPLE AROUND SWINGS, MICRON: - RADIAL BEATING 80 - DIFFERENCE OF DIAMETERS 100 TIME OF PROCESSING OF ONE WHEEL COUPLE, MINES 10-12 POWER OF THE DRIVE OF THE MAIN MOVEMENT, KW 2?55 TOTAL POWER OF THE ELECTRIC MOTORS INSTALLED TO KW ON THE MACHINE 139,1 OVERALL DIMENSIONS OF THE MACHINE (TOGETHER WITH SEPARATELY LOCATED UNITS GIDRO-AND ELECTRIC EQUIPMENTS, MM: - LENGTH 7300 - WIDTH OF 2700 - HEIGHT OF 2700 MACHINE N ACCURACY CLASS THE MASS OF THE MACHINE (WITH SEPARATELY LOCATED UNITS GIDRO-AND ELECTRIC EQUIPMENTS), KG: 38500
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-one used bruderer bsta50 h high speed punch press.
refurbished/rebuilt in 2002.
50 tons (500 kn) nominal capacity.
adjustable stroke 16 to 51 mm.
speed range 100 to 1200 spm max.
bolster area 760 mm x 650 mm.
fitted with roll feed bbv 202/120 on right-hand side.
max width of strip 200 mm.
electrical control cabinet freestanding.
oil cooler. spring feet.
weight of machine approx 8000 kgs.
 ONE USED BRUDERER BSTA50 H HIGH SPEED PUNCH PRESS. REFURBISHED/REBUILT IN 2002. 50 TONS (500 KN) NOMINAL CAPACITY. ADJUSTABLE STROKE 16 TO 51 MM. SPEED RANGE 100 TO 1200 SPM MAX. BOLSTER AREA 760 MM X 650 MM. FITTED WITH ROLL FEED BBV 202/120 ON RIGHT-HAND SIDE. MAX WIDTH OF STRIP 200 MM. ELECTRICAL CONTROL CABINET FREESTANDING. OIL COOLER. SPRING FEET. WEIGHT OF MACHINE APPROX 8000 KGS.
Vendedor: Parkes Machine Tools Ltd
Año de construcción: usado
Precio: 15.900 €
Ubicación: Land-bruderer bsta 30 pressure 30 tons up to 600 number of strokes / min feeder from left to right table size: 545 x 470 mm j7000r central lubrication total power requirement: 5.5 kw weight of the machine: 2, 5t
classical control table BRUDERER BSTA 30 PRESSURE 30 TONS UP TO 600 NUMBER OF STROKES / MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM J7000R CENTRAL LUBRICATION TOTAL POWER REQUIREMENT: 5.5 KW WEIGHT OF THE MACHINE: 2, 5T CLASSICAL CONTROL TABLE
Vendedor: Mobilija.DOO
Año de construcción: usado
Precio: 19.000 €
Ubicación: Land-bruderer bsta 30 

pressure 30 tons 
up to 600 number of strokes / min 
feeder from left to right 
table size: 545 x 470 mm 
j7000r 
central lubrication 
total power requirement : 5,5 kw 
weight of the machine: 2,5t
classical control table  BRUDERER BSTA 30 PRESSURE 30 TONS UP TO 600 NUMBER OF STROKES / MIN FEEDER FROM LEFT TO RIGHT TABLE SIZE: 545 X 470 MM J7000R CENTRAL LUBRICATION TOTAL POWER REQUIREMENT : 5,5 KW WEIGHT OF THE MACHINE: 2,5T CLASSICAL CONTROL TABLE
Vendedor: Mobilija.DOO
Año de construcción: usado
Ubicación: Land-sizes of a working surface of a table mm          2500x2500
diameter of a spindle                 mm          160
internal cone of a spindle                        metric 80
the greatest movements:
- z is longitudinal a spindle,        mm          1250
- vertically spindle, y               mm          2000
- cross spindle, x                    mm          3150

limits of frequencies of rotation:
spindle                               rpm         7,5 - 950
limits of working giving:
x, y, z, w                            mm/min.     2,5 - 2000

speed of fast adjusting movements:    mm/min.
- sliding spindle                                 3000
- shpindelny grandma                              2500
- forward rack                                    2500
power of the main drive               kw          37
overall dimensions. mm
- length                                          11500
- width                                           8100
- height                                          5500
weight                                kg          58000 SIZES OF A WORKING SURFACE OF A TABLE MM 2500X2500 DIAMETER OF A SPINDLE MM 160 INTERNAL CONE OF A SPINDLE METRIC 80 THE GREATEST MOVEMENTS: - Z IS LONGITUDINAL A SPINDLE, MM 1250 - VERTICALLY SPINDLE, Y MM 2000 - CROSS SPINDLE, X MM 3150 LIMITS OF FREQUENCIES OF ROTATION: SPINDLE RPM 7,5 - 950 LIMITS OF WORKING GIVING: X, Y, Z, W MM/MIN. 2,5 - 2000 SPEED OF FAST ADJUSTING MOVEMENTS: MM/MIN. - SLIDING SPINDLE 3000 - SHPINDELNY GRANDMA 2500 - FORWARD RACK 2500 POWER OF THE MAIN DRIVE KW 37 OVERALL DIMENSIONS. MM - LENGTH 11500 - WIDTH 8100 - HEIGHT 5500 WEIGHT KG 58000
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Ubicación: Land-heavy duty lathe zerbst type dps 1600 x 3000

faceplate diameter:                        1.250 mm

center height over bed:                      800 mm

max. turning diameter over bed:            1.600 mm

max. turning diameter over carriage:       1.200 mm

max. turning diameter in front of the bed:  2420 mm

max. turning length:                       3.000 mm

max. workpiece weight between centers:      8000 kg

spindle bore                                 100 mm

main motor power:                             30 kw

3 (three) bed ways construction

with 1 pc. steady rest.

location: presstrade romania warehouse, near oradea, in romania. HEAVY DUTY LATHE ZERBST TYPE DPS 1600 X 3000 FACEPLATE DIAMETER: 1.250 MM CENTER HEIGHT OVER BED: 800 MM MAX. TURNING DIAMETER OVER BED: 1.600 MM MAX. TURNING DIAMETER OVER CARRIAGE: 1.200 MM MAX. TURNING DIAMETER IN FRONT OF THE BED: 2420 MM MAX. TURNING LENGTH: 3.000 MM MAX. WORKPIECE WEIGHT BETWEEN CENTERS: 8000 KG SPINDLE BORE 100 MM MAIN MOTOR POWER: 30 KW 3 (THREE) BED WAYS CONSTRUCTION WITH 1 PC. STEADY REST. LOCATION: PRESSTRADE ROMANIA WAREHOUSE, NEAR ORADEA, IN ROMANIA.
Vendedor: PRESSTRADE Romania
Año de construcción: usado
Ubicación: Land-cnc heavy lathe(2500mm x14000mm)
 make: ravenssburg(germany)
year:1995
max. turning-Ø above carriage  2500 mm

max. turning-Ø above bed       3000 mm

max. centre height over floor    2410 mm

max. centre height over bed ways      2000  mm

max. distance between centres  14000  mm

load capacity between centres  80000 kg

load capacity with steady rests 125000 kg

machine weight approx.  350 t

size of carriage  bed      1800 x 1000 mm

size of  slide bed  1600 x 800

control siemens sinumerik      880 t

power required     315 kw


spindle boring-Ø  150 mm

4 main spindle drives     1-200 rpm

main drive (d.c. motor)    200 kw/910 rpm

max. torque of faceplate 100 000 nm

faceplate -Ø         2000 mm

       

max. traverse (x ½ -axes) 1480 mm

feeds 1-5000 mm

(x/z-axis)     0.05-50 rpm

rapid traverse       8000 mm/min.

thread pitch (x/z-axis)    0,01-2000 rpm

-       siemens sinumerik 880 t

-       2 cnc carriages with tool changers

      carriage 1)  with sword turning attachment, boring bar attachment and belt grinding

                         attachment (50 kw)

      carriage 2)  with sword turning attachment, belt grinding attachment (50 kw), and drilling-

                         and milling attachment (40 kw)
-       total power required: 315 kw

-       total weight: approx. 350t
bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567    



 CNC HEAVY LATHE(2500MM X14000MM) MAKE: RAVENSSBURG(GERMANY) YEAR:1995 MAX. TURNING-Ø ABOVE CARRIAGE 2500 MM MAX. TURNING-Ø ABOVE BED 3000 MM MAX. CENTRE HEIGHT OVER FLOOR 2410 MM MAX. CENTRE HEIGHT OVER BED WAYS 2000 MM MAX. DISTANCE BETWEEN CENTRES 14000 MM LOAD CAPACITY BETWEEN CENTRES 80000 KG LOAD CAPACITY WITH STEADY RESTS 125000 KG MACHINE WEIGHT APPROX. 350 T SIZE OF CARRIAGE BED 1800 X 1000 MM SIZE OF SLIDE BED 1600 X 800 CONTROL SIEMENS SINUMERIK 880 T POWER REQUIRED 315 KW SPINDLE BORING-Ø 150 MM 4 MAIN SPINDLE DRIVES 1-200 RPM MAIN DRIVE (D.C. MOTOR) 200 KW/910 RPM MAX. TORQUE OF FACEPLATE 100 000 NM FACEPLATE -Ø 2000 MM MAX. TRAVERSE (X ½ -AXES) 1480 MM FEEDS 1-5000 MM (X/Z-AXIS) 0.05-50 RPM RAPID TRAVERSE 8000 MM/MIN. THREAD PITCH (X/Z-AXIS) 0,01-2000 RPM - SIEMENS SINUMERIK 880 T - 2 CNC CARRIAGES WITH TOOL CHANGERS CARRIAGE 1) WITH SWORD TURNING ATTACHMENT, BORING BAR ATTACHMENT AND BELT GRINDING ATTACHMENT (50 KW) CARRIAGE 2) WITH SWORD TURNING ATTACHMENT, BELT GRINDING ATTACHMENT (50 KW), AND DRILLING- AND MILLING ATTACHMENT (40 KW) - TOTAL POWER REQUIRED: 315 KW - TOTAL WEIGHT: APPROX. 350T BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)