10673 ofertas

número máximo de resultados excedió > 1000
por favor refinar su búsqueda

Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used roller track converter of manufacturer's scarce
feet must be ordered separately
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
drive type: flat belt with motor
number: 4 pcs.
2 stk. with partial engine
2 pcs with engine under the conveyor

<b>converter</b>

converter with chains or straps gently raise the goods and settle it gently on the goal line. this includes both routes leave during recording and weaning shortly.

<b>technical data:

mass of the roller</b>
overall length: 720mm
total width: 1040 mm
width: 485 mm

<b>information on the role</b>
clamping length: 415 mm
diameter approx: 50mm
material: steel, galvanised

<b>information to the converter</b>
length: 910mm
belt width: 25 mm
number of belts: 2 pcs.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry habean we already successfully realized projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED ROLLER TRACK CONVERTER OF MANUFACTURER'S SCARCE FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED DRIVE TYPE: FLAT BELT WITH MOTOR NUMBER: 4 PCS. 2 STK. WITH PARTIAL ENGINE 2 PCS WITH ENGINE UNDER THE CONVEYOR <B>CONVERTER</B> CONVERTER WITH CHAINS OR STRAPS GENTLY RAISE THE GOODS AND SETTLE IT GENTLY ON THE GOAL LINE. THIS INCLUDES BOTH ROUTES LEAVE DURING RECORDING AND WEANING SHORTLY. <B>TECHNICAL DATA: MASS OF THE ROLLER</B> OVERALL LENGTH: 720MM TOTAL WIDTH: 1040 MM WIDTH: 485 MM <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH: 415 MM DIAMETER APPROX: 50MM MATERIAL: STEEL, GALVANISED <B>INFORMATION TO THE CONVERTER</B> LENGTH: 910MM BELT WIDTH: 25 MM NUMBER OF BELTS: 2 PCS. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY HABEAN WE ALREADY SUCCESSFULLY REALIZED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 35.200 EU€
Ubicación: Land-the machine is designed for grinding simple wooden elements placed in line. THE MACHINE IS DESIGNED FOR GRINDING SIMPLE WOODEN ELEMENTS PLACED IN LINE.
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

used roller track converter of manufacturer's scarce
feet must be ordered separately
condition: fully functional with traces of use
ideal for fast material handling
expertly disassembled and packed
drive type: flat belt with motor

<b>converter</b>

converter with chains or straps gently raise the goods and settle it gently on the goal line. this includes both routes leave during recording and weaning shortly.

<b>technical data:

mass of the roller</b>
overall length: 900mm
total width: 1030 mm
width: 485 mm

<b>information on the role</b>
clamping length: 415 mm
diameter approx: 50mm
material: steel, galvanised

<b>information to the converter</b>
length: 910mm
belt width: 25 mm
number of straps: 4 pcs.

<b>tailor-made solutions for your intralogistics</b>

we are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! gladly we will create you an individual offer or advise on the design or assembly questions. just let your needs and local conditions us to.

take advantage of our many years of experience and our excellent network of professionals. for companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

together, we will work out ways to optimize your process and material flow cost effectively and sustainably. we can offer you even fully automatic sorting equipment or additional components such as picking racks or containers. <B>PROPERTIES:</B> USED ROLLER TRACK CONVERTER OF MANUFACTURER'S SCARCE FEET MUST BE ORDERED SEPARATELY CONDITION: FULLY FUNCTIONAL WITH TRACES OF USE IDEAL FOR FAST MATERIAL HANDLING EXPERTLY DISASSEMBLED AND PACKED DRIVE TYPE: FLAT BELT WITH MOTOR <B>CONVERTER</B> CONVERTER WITH CHAINS OR STRAPS GENTLY RAISE THE GOODS AND SETTLE IT GENTLY ON THE GOAL LINE. THIS INCLUDES BOTH ROUTES LEAVE DURING RECORDING AND WEANING SHORTLY. <B>TECHNICAL DATA: MASS OF THE ROLLER</B> OVERALL LENGTH: 900MM TOTAL WIDTH: 1030 MM WIDTH: 485 MM <B>INFORMATION ON THE ROLE</B> CLAMPING LENGTH: 415 MM DIAMETER APPROX: 50MM MATERIAL: STEEL, GALVANISED <B>INFORMATION TO THE CONVERTER</B> LENGTH: 910MM BELT WIDTH: 25 MM NUMBER OF STRAPS: 4 PCS. <B>TAILOR-MADE SOLUTIONS FOR YOUR INTRALOGISTICS</B> WE ARE YOUR COMPETENT PARTNER FOR ROLLER CONVEYORS, BELT LIFTS, INCLINED CONVEYORS OR TELESCOPES TO THE LOADING AND UNLOADING OF GOODS! GLADLY WE WILL CREATE YOU AN INDIVIDUAL OFFER OR ADVISE ON THE DESIGN OR ASSEMBLY QUESTIONS. JUST LET YOUR NEEDS AND LOCAL CONDITIONS US TO. TAKE ADVANTAGE OF OUR MANY YEARS OF EXPERIENCE AND OUR EXCELLENT NETWORK OF PROFESSIONALS. FOR COMPANIES OF VARIOUS INDUSTRIES, SUCH AS: LOGISTICS, PHARMACEUTICAL INDUSTRY, CRAFTS OR THE ELECTRONICS INDUSTRY WE HAVE ALREADY SUCCESSFULLY IMPLEMENTED PROJECTS. TOGETHER, WE WILL WORK OUT WAYS TO OPTIMIZE YOUR PROCESS AND MATERIAL FLOW COST EFFECTIVELY AND SUSTAINABLY. WE CAN OFFER YOU EVEN FULLY AUTOMATIC SORTING EQUIPMENT OR ADDITIONAL COMPONENTS SUCH AS PICKING RACKS OR CONTAINERS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 76.750 EU€
Ubicación: Land-pl Poland, 97-40 Be?chatów
Vendedor: Kennedy Machines
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 650 mm
clamp retracted: 600 mm
quantity: 10 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 650 MM CLAMP RETRACTED: 600 MM QUANTITY: 10 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Precio: 38.800 €
Ubicación: Land-; accessories: allrad, kabine, diesel, teleskoparm (bautechnikeinsatz), geschwindigkeit:40, hubhöhe:7.1; maximum lift capacity [kg]: 4400 ; ACCESSORIES: ALLRAD, KABINE, DIESEL, TELESKOPARM (BAUTECHNIKEINSATZ), GESCHWINDIGKEIT:40, HUBHöHE:7.1; MAXIMUM LIFT CAPACITY [KG]: 4400
Vendedor: Fritz Brandt Landmaschinenhandel
Año de construcción: usado
Ubicación: Land-spiral mixer

make: kemper

model: sp 50 l (80 kg of dough)

-light paint damage

-excellent condition

-with warranty SPIRAL MIXER MAKE: KEMPER MODEL: SP 50 L (80 KG OF DOUGH) -LIGHT PAINT DAMAGE -EXCELLENT CONDITION -WITH WARRANTY
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Ubicación: Land-DE Germany, 88255 Baienfurt
Vendedor: Kiesel Worldwide Machinery GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 650 mm
clamp retracted: 600 mm
quantity: 10 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 650 MM CLAMP RETRACTED: 600 MM QUANTITY: 10 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-x travel:   1400 mm<br/>y travel:   1000 mm<br/>z travel:    780 mm<br/>--------------------------------------------------:  <br/>working range -cubic-:  <br/>- x-axis travel:   1400 mm<br/>- y-axis travel:   1000 mm<br/>- z-axis travel:    780 mm<br/>table:  <br/>- table surface (left-right):   1000 mm<br/>- table surface (front-back):   1000 mm<br/>- workpiece load (max):   3000 kg<br/>- rotation axis: c:        <br/>- - positioning/indexing:  0.001 °<br/>milling spindle / head:  <br/>- spindle type: tilting head:        <br/>- - positioning/indexing:    2.5 °<br/>- - positioning/indexing:    2.5 °<br/>- tool fixture: iso sk 50:        <br/>tool magazine:  <br/>- number of positions:     60  <br/>automatic workload equipment:  <br/>- number of store positions:      2  <br/>- pallet length:   1000 mm<br/>- pallet width:   1000 mm<br/>- number of pallets:      2  <br/><br/><br/><br/><br/> X TRAVEL: 1400 MM
Y TRAVEL: 1000 MM
Z TRAVEL: 780 MM
--------------------------------------------------:
WORKING RANGE -CUBIC-:
- X-AXIS TRAVEL: 1400 MM
- Y-AXIS TRAVEL: 1000 MM
- Z-AXIS TRAVEL: 780 MM
TABLE:
- TABLE SURFACE (LEFT-RIGHT): 1000 MM
- TABLE SURFACE (FRONT-BACK): 1000 MM
- WORKPIECE LOAD (MAX): 3000 KG
- ROTATION AXIS: C:
- - POSITIONING/INDEXING: 0.001 °
MILLING SPINDLE / HEAD:
- SPINDLE TYPE: TILTING HEAD:
- - POSITIONING/INDEXING: 2.5 °
- - POSITIONING/INDEXING: 2.5 °
- TOOL FIXTURE: ISO SK 50:
TOOL MAGAZINE:
- NUMBER OF POSITIONS: 60
AUTOMATIC WORKLOAD EQUIPMENT:
- NUMBER OF STORE POSITIONS: 2
- PALLET LENGTH: 1000 MM
- PALLET WIDTH: 1000 MM
- NUMBER OF PALLETS: 2




Vendedor: ProdEq Trading GmbH
Año de construcción: usado
Ubicación: Land-<b>properties:</b>

condition: fully functional, with traces of use
manufacturer: knapp
material: steel
expertly disassembled and packed
condition: good
extended clamping: 450 mm
clamp retracted: 400 mm
quantity: 20 pcs. <B>PROPERTIES:</B> CONDITION: FULLY FUNCTIONAL, WITH TRACES OF USE MANUFACTURER: KNAPP MATERIAL: STEEL EXPERTLY DISASSEMBLED AND PACKED CONDITION: GOOD EXTENDED CLAMPING: 450 MM CLAMP RETRACTED: 400 MM QUANTITY: 20 PCS.
Vendedor: Lager-und Fördertechnik Namoni
Año de construcción: usado
Ubicación: Land-weight approx.: 600 kg<br/>dimensions (l x w x h) approx.: 1500 x 1500 x 3000 mm<br/>description: - WEIGHT APPROX.: 600 KG
DIMENSIONS (L X W X H) APPROX.: 1500 X 1500 X 3000 MM
DESCRIPTION: -
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-dough dividing and moulding machine

make: werner & pfleiderer

model: rotamat cn 30 pcs.   3-70 g

with 3 new casting plates

-overtaken top

-with warranty DOUGH DIVIDING AND MOULDING MACHINE MAKE: WERNER & PFLEIDERER MODEL: ROTAMAT CN 30 PCS. 3-70 G WITH 3 NEW CASTING PLATES -OVERTAKEN TOP -WITH WARRANTY
Vendedor: BÄCKEREI-TECHNIK DIETER ZEH KG
Año de construcción: usado
Ubicación: Land-weight approx.: 240 kg<br/>dimensions (l x w x h) approx.: 800 x 1400 x 2400 mm<br/>description: length of tape 51 mts. WEIGHT APPROX.: 240 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 1400 X 2400 MM
DESCRIPTION: LENGTH OF TAPE 51 MTS.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-press force: 100 t	
stroke length: 40 mm	
number of strokes - idling:	
single stroke 150-350 z / m	
ram adjustment: 30 mm	
table mounting surface:	
1240 x 2020 mm	
plate holes:	
800 x 400/800 x 160/800 x 160 mm	
side post passage: 730 mm	
motor power: 4p x 22 kw	
machine weight: 18000 kg	
accessories:	
decoiler	
forklifts	
noise barrier	
fence	
drawing documentation	
manuals	
lubrication (lubricatino)	
clutch and brake	
dry clutch	
disc brake PRESS FORCE: 100 T STROKE LENGTH: 40 MM NUMBER OF STROKES - IDLING: SINGLE STROKE 150-350 Z / M RAM ADJUSTMENT: 30 MM TABLE MOUNTING SURFACE: 1240 X 2020 MM PLATE HOLES: 800 X 400/800 X 160/800 X 160 MM SIDE POST PASSAGE: 730 MM MOTOR POWER: 4P X 22 KW MACHINE WEIGHT: 18000 KG ACCESSORIES: DECOILER FORKLIFTS NOISE BARRIER FENCE DRAWING DOCUMENTATION MANUALS LUBRICATION (LUBRICATINO) CLUTCH AND BRAKE DRY CLUTCH DISC BRAKE
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 700 €
Ubicación: Land-weight approx.: 2500 kg<br/>dimensions (l x w x h) approx.: 1600 x 1200 x 1500 mm<br/>description: internal reference 164.011, table size 1600 x 400 mm, max. workpiece thickness approx. 105 mm WEIGHT APPROX.: 2500 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1200 X 1500 MM
DESCRIPTION: INTERNAL REFERENCE 164.011, TABLE SIZE 1600 X 400 MM, MAX. WORKPIECE THICKNESS APPROX. 105 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 3.250.000 usd
Ubicación: Land-we have a compltet metyear.serious contact us,please. hanol plant for sale,set up in 2007,capacity 100,000t/y.designed and manufactured by chinese company.stopped less one year,good condition.serious contact us ,please    WE HAVE A COMPLTET METYEAR.SERIOUS CONTACT US,PLEASE. HANOL PLANT FOR SALE,SET UP IN 2007,CAPACITY 100,000T/Y.DESIGNED AND MANUFACTURED BY CHINESE COMPANY.STOPPED LESS ONE YEAR,GOOD CONDITION.SERIOUS CONTACT US ,PLEASE
Vendedor: SHANGHAI HELM IMP.&EXP. LTD
Año de construcción: usado
Precio: used machinery auction RESALE 350 €
Ubicación: Land-weight approx.: 700 kg<br/>dimensions (l x w x h) approx.: 2000 x 1500 x 1300 mm<br/>description: internal reference 154.197, surface planer: working width 350 mm, table length 2000 mm, spindle with 4 knives, tilting fence with dimensions 700 x 120 mm, circular saw: max. blade saw diameter 300 mm, table size 700 x 220 mm, mortiser: table size 510 x 200 mm, transversal stroke 160 mm WEIGHT APPROX.: 700 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1500 X 1300 MM
DESCRIPTION: INTERNAL REFERENCE 154.197, SURFACE PLANER: WORKING WIDTH 350 MM, TABLE LENGTH 2000 MM, SPINDLE WITH 4 KNIVES, TILTING FENCE WITH DIMENSIONS 700 X 120 MM, CIRCULAR SAW: MAX. BLADE SAW DIAMETER 300 MM, TABLE SIZE 700 X 220 MM, MORTISER: TABLE SIZE 510 X 200 MM, TRANSVERSAL STROKE 160 MM
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ostas plate shear

type orgm 2050 x 3

-capaciteit 2050 x 3 mm
-achteraanslag electrical
-voetbediening
-fotocelbeveiliging van de achterzijde
-oplegarmen
-verlichting van snijlijn
-remmotor
-noodstop
-documentatie
-weight 2000 kg
-400v

dutchmach
metal working machinery
enschede - netherlands

(3 km from the german border) OSTAS PLATE SHEAR TYPE ORGM 2050 X 3 -CAPACITEIT 2050 X 3 MM -ACHTERAANSLAG ELECTRICAL -VOETBEDIENING -FOTOCELBEVEILIGING VAN DE ACHTERZIJDE -OPLEGARMEN -VERLICHTING VAN SNIJLIJN -REMMOTOR -NOODSTOP -DOCUMENTATIE -WEIGHT 2000 KG -400V DUTCHMACH METAL WORKING MACHINERY ENSCHEDE - NETHERLANDS (3 KM FROM THE GERMAN BORDER)
Vendedor: DutchMach
Año de construcción: usado
Ubicación: Land-stainless steel, incl. light and filter\r\nwidth 3500 mm, depth 1200 mm, height 400 mm STAINLESS STEEL, INCL. LIGHT AND FILTER\R\NWIDTH 3500 MM, DEPTH 1200 MM, HEIGHT 400 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-powder coating equipment

 parkerizing phosphate coating equipment
make:wastec(korean)
year:2014
2) process tank 
? load/unload(#1):size: 800(w) x 1,200(l) x 1,200(h)mm 
? alkali cleaner tank(#2) : size: 800(w) x 1,200(l) x 1,200(h)mm
3) 2-step water rinse bath(#3,4): size: 1,400(w) x 1,200(l) x 1,200(h)mm
4) acid rinse bath(#5): size: 750(w) x 1,200(l) x  1,200(h)mm
5) 2-step water rinse bath(#6,7): 1,400(w) x 1,200(l) x  1,200(h)mm
7) surface condition bath(#8) :: 750(w) x 1,200(l) 1,200(h)mm
8) coating bath(#9,10) : 900(w) x 1,200(l) x 1,200(h)mm
9) hot water rinse(#11) : 750(w) x 1,200(l) x 1,200(h)mm
10) dry tank(#12) :  
 size(inside): 700(w) x   1,200(l) x 1,200(h)mm
    size(outside): 1,300(w) x  2,000(l) x 1,200(h)mm  
  temp: 90?~110?
11) carrier system(#1,2): 1,400(w) x 1,600(l) x 600(h)mm 
   line speed:   transer-0.2~0.6m/sec     lifting-0.2~0.5m/sec
12) heating system :   steam heater
13) degreaser oil and water separator 
  tank(sus304): 600(w)x 1,200(l) x 700(h)mm
14) liquid agitator   
 15) acid bath filter:  4,800~6,000?/hr
16) piping system
17) basket    size: 500(w) x 600(l) x  400(h)mm
18) condensing water recovery ststem
19) electrical system 
   main power: 440v x 3Ø x 60hz  
  control power: 220v x 1Ø   x 60hz   
20) anti-polution system
21) carrier type tank :: 1,100?

sand blast m/c
make:sanga(korea)
year:2014
 conveyor type 
cycle time: 10~12sec
 cyclone & storage tank: Ø450 x 800(l)mm 
nozzle unit 
conveyor & turning unit 
loading/unloading unit 
nozzle oscillator 
dust collector

anti-air pollution equipment 
make:seonghwa(korea)
year:2014
packed-tower 
cap: 230cmm 
body: ?2,000 x 5,000(l)mm 
stack: ?650 x 3,000(l)mm 
turbo fan: 230?/min x 200mmaq 
motor: 20hp 

coating and dryer 
make:wastec(korean)
year:2002
14,500(l) x 4,000(w x 1,500(h) 
2) 300kw  
cap: 1,080ea/hr 
1) preheater dryer: 3,000(l) x 2,200(w)  , 30kw(1set)  
 blower: 23.3? x 19mmaq          
2) 1st coating  1,500(l) x 2,000(w)
nozzle: 6set 
 3) 1st dryer: 4,800(l) x 2,200(w), 24kw(2set)  
 blower: 20? x 17mmaq(2set)
4) 2nd coating  
 nozzle: 6set , 1,500(l) x 2,000(w)
5) 2nd dryer:: 4,000(l) x 2,000(w), 30kw(1set)  
 blower: 20? x 17mmaq(1set)
6) low temperature dryer:: 12,500(l) x 1,000(w), 30kw(3set)  
 blower: 23.3? x 190mmaq (3set)
7) cooling  : 1,000(l) x 800(w) , 10kw(1set)

washing equipment 
make:wastec(korean)
year:2002
7,000(l) x 1,100(w) x 1,800(h) 
2) cap: 1,500ea/hr 
3) 100kw
4)  r/o system
5) electric heater type

 dryer 
make:hanil(korea)
year:2002
 size: 1,440(l) x 2,000(w) x 1,530(h)
2) cap: 1,000ea/hr 
3)  40kw
4) car and rack 2set
5) heater: scr unit type

washer & bush insert m/c 
make:kumduk(korea)
year:2015
turn table unit: 2head 
unloading loader 
base & frame & cover: 75 x 75mm square pipe 
in loader unit 
index table unit 
washer loader unit x 2set
 washer check unit 
bush feed press unit: bush 

3-pin press  
make:kumduk(korea)
year:2015
base & frame & cover 
6-axics multi articulation  robot(yaskawa) 
manipulator
 index table unit 
3-pin feed unit
3-pin press unit 
unloading unit
 3-pin height check unit 

air compressor
make:taesan(korea)
year:2015
 
shaft powder coating line
make:misung(korea)
year:2015
 loading & unloading unit 
 preheater dry oven 45kw(15kw x 3set)
preheater after cooling zone: 
4) powder automatic equipment
5) idle transfer & index unit
6) loading transfer & masking    jig unit
7) oven jig: 16 x 130ea
8) powder recovery system
9) main baking oven 
10) floor conveyor
11) main cooling zone 

   bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567
  POWDER COATING EQUIPMENT PARKERIZING PHOSPHATE COATING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2014 2) PROCESS TANK ? LOAD/UNLOAD(#1):SIZE: 800(W) X 1,200(L) X 1,200(H)MM ? ALKALI CLEANER TANK(#2) : SIZE: 800(W) X 1,200(L) X 1,200(H)MM 3) 2-STEP WATER RINSE BATH(#3,4): SIZE: 1,400(W) X 1,200(L) X 1,200(H)MM 4) ACID RINSE BATH(#5): SIZE: 750(W) X 1,200(L) X 1,200(H)MM 5) 2-STEP WATER RINSE BATH(#6,7): 1,400(W) X 1,200(L) X 1,200(H)MM 7) SURFACE CONDITION BATH(#8) :: 750(W) X 1,200(L) 1,200(H)MM 8) COATING BATH(#9,10) : 900(W) X 1,200(L) X 1,200(H)MM 9) HOT WATER RINSE(#11) : 750(W) X 1,200(L) X 1,200(H)MM 10) DRY TANK(#12) : SIZE(INSIDE): 700(W) X 1,200(L) X 1,200(H)MM SIZE(OUTSIDE): 1,300(W) X 2,000(L) X 1,200(H)MM TEMP: 90?~110? 11) CARRIER SYSTEM(#1,2): 1,400(W) X 1,600(L) X 600(H)MM LINE SPEED: TRANSER-0.2~0.6M/SEC LIFTING-0.2~0.5M/SEC 12) HEATING SYSTEM : STEAM HEATER 13) DEGREASER OIL AND WATER SEPARATOR TANK(SUS304): 600(W)X 1,200(L) X 700(H)MM 14) LIQUID AGITATOR 15) ACID BATH FILTER: 4,800~6,000?/HR 16) PIPING SYSTEM 17) BASKET SIZE: 500(W) X 600(L) X 400(H)MM 18) CONDENSING WATER RECOVERY STSTEM 19) ELECTRICAL SYSTEM MAIN POWER: 440V X 3Ø X 60HZ CONTROL POWER: 220V X 1Ø X 60HZ 20) ANTI-POLUTION SYSTEM 21) CARRIER TYPE TANK :: 1,100? SAND BLAST M/C MAKE:SANGA(KOREA) YEAR:2014 CONVEYOR TYPE CYCLE TIME: 10~12SEC CYCLONE & STORAGE TANK: Ø450 X 800(L)MM NOZZLE UNIT CONVEYOR & TURNING UNIT LOADING/UNLOADING UNIT NOZZLE OSCILLATOR DUST COLLECTOR ANTI-AIR POLLUTION EQUIPMENT MAKE:SEONGHWA(KOREA) YEAR:2014 PACKED-TOWER CAP: 230CMM BODY: ?2,000 X 5,000(L)MM STACK: ?650 X 3,000(L)MM TURBO FAN: 230?/MIN X 200MMAQ MOTOR: 20HP COATING AND DRYER MAKE:WASTEC(KOREAN) YEAR:2002 14,500(L) X 4,000(W X 1,500(H) 2) 300KW CAP: 1,080EA/HR 1) PREHEATER DRYER: 3,000(L) X 2,200(W) , 30KW(1SET) BLOWER: 23.3? X 19MMAQ 2) 1ST COATING 1,500(L) X 2,000(W) NOZZLE: 6SET 3) 1ST DRYER: 4,800(L) X 2,200(W), 24KW(2SET) BLOWER: 20? X 17MMAQ(2SET) 4) 2ND COATING NOZZLE: 6SET , 1,500(L) X 2,000(W) 5) 2ND DRYER:: 4,000(L) X 2,000(W), 30KW(1SET) BLOWER: 20? X 17MMAQ(1SET) 6) LOW TEMPERATURE DRYER:: 12,500(L) X 1,000(W), 30KW(3SET) BLOWER: 23.3? X 190MMAQ (3SET) 7) COOLING : 1,000(L) X 800(W) , 10KW(1SET) WASHING EQUIPMENT MAKE:WASTEC(KOREAN) YEAR:2002 7,000(L) X 1,100(W) X 1,800(H) 2) CAP: 1,500EA/HR 3) 100KW 4) R/O SYSTEM 5) ELECTRIC HEATER TYPE DRYER MAKE:HANIL(KOREA) YEAR:2002 SIZE: 1,440(L) X 2,000(W) X 1,530(H) 2) CAP: 1,000EA/HR 3) 40KW 4) CAR AND RACK 2SET 5) HEATER: SCR UNIT TYPE WASHER & BUSH INSERT M/C MAKE:KUMDUK(KOREA) YEAR:2015 TURN TABLE UNIT: 2HEAD UNLOADING LOADER BASE & FRAME & COVER: 75 X 75MM SQUARE PIPE IN LOADER UNIT INDEX TABLE UNIT WASHER LOADER UNIT X 2SET WASHER CHECK UNIT BUSH FEED PRESS UNIT: BUSH 3-PIN PRESS MAKE:KUMDUK(KOREA) YEAR:2015 BASE & FRAME & COVER 6-AXICS MULTI ARTICULATION ROBOT(YASKAWA) MANIPULATOR INDEX TABLE UNIT 3-PIN FEED UNIT 3-PIN PRESS UNIT UNLOADING UNIT 3-PIN HEIGHT CHECK UNIT AIR COMPRESSOR MAKE:TAESAN(KOREA) YEAR:2015 SHAFT POWDER COATING LINE MAKE:MISUNG(KOREA) YEAR:2015 LOADING & UNLOADING UNIT PREHEATER DRY OVEN 45KW(15KW X 3SET) PREHEATER AFTER COOLING ZONE: 4) POWDER AUTOMATIC EQUIPMENT 5) IDLE TRANSFER & INDEX UNIT 6) LOADING TRANSFER & MASKING JIG UNIT 7) OVEN JIG: 16 X 130EA 8) POWDER RECOVERY SYSTEM 9) MAIN BAKING OVEN 10) FLOOR CONVEYOR 11) MAIN COOLING ZONE BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-length cylinder 250 mm\r\nmachine is working without belt\r\nproduct range: crescents, beer sticks, salt sticks\r\n LENGTH CYLINDER 250 MM\R\NMACHINE IS WORKING WITHOUT BELT\R\NPRODUCT RANGE: CRESCENTS, BEER STICKS, SALT STICKS\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-anodizing coating (alumite coating) for aluminium parts

1. anodizing line(automatic type) 
make:taewon(korea)
year:2012
cap': 7,000ea/hour 
 
2-1. anodizing line(manual type) 
make:chunwoo(korea)
year:2012
  
2-2. anodizing line(manual type)
make:beomyang(korean)
year:2012

2-3. anodizing line(manual type)-rectifier
make:mirae(korea)
year:2012

2-4. anodizing(manual type)-steam boiler 
make:bustar(korea)
year:2012

2-5. anodizing(manual type)-circulation pump 
make:daeyong(korea)
year:2012

2-6. anodizing(manual type)-circulation pump 
make:gumi(korea)
year:2012

2-7 .anodizing(manual type)-control panel 
make:donglak(korea)
year:2012

3-1. buffing line-polishing machine
 make:bando(korea)
year:2012
cap': 4,000ea/day×3ea 
  
3-2. buffing line-dust collector
 make:buza(korea)
year:2012

3-3. buffing line-air comperssor 
make:atlas(usa)

3-4 buffing line-ultranic cleaner
make:uzu(korea)
year:2012 

6. pure water production equipment
make:bosung(korea)
year:2012
cap': 3?/hr  

8. hydraulic press 
make:dongjin(korea)
year:2013
cap': max.20ton  
stroke: 150mm  
open height: 350mm  
bolster size: 700×400mm  
main motor: 3.75kw  
 
10. anodizing line(electro coating)
 make:daehung(korea)
year:2012

11. auto sand blast m/c 
make:hankook(korea)
year:2012
conveyor type  
conveyor: w900mm  
chamber inner size  :1900×1280×915hmm  
gun: 12set  
jet nozzle: ?3.2mm  

14 .auto sand blast m/c 
make:hankook(korea)
year:2012

15. auto sand blast m/c 
make:hankook(korea)
year:2015
main turntable ?650mm  
6multi table  
8nozzle unit  


bmj korea co.,ltd
director:jongduk
e-mail:paekjs1961@gmail.com
mobile)+82-10-7499-2567

  ANODIZING COATING (ALUMITE COATING) FOR ALUMINIUM PARTS 1. ANODIZING LINE(AUTOMATIC TYPE) MAKE:TAEWON(KOREA) YEAR:2012 CAP': 7,000EA/HOUR 2-1. ANODIZING LINE(MANUAL TYPE) MAKE:CHUNWOO(KOREA) YEAR:2012 2-2. ANODIZING LINE(MANUAL TYPE) MAKE:BEOMYANG(KOREAN) YEAR:2012 2-3. ANODIZING LINE(MANUAL TYPE)-RECTIFIER MAKE:MIRAE(KOREA) YEAR:2012 2-4. ANODIZING(MANUAL TYPE)-STEAM BOILER MAKE:BUSTAR(KOREA) YEAR:2012 2-5. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:DAEYONG(KOREA) YEAR:2012 2-6. ANODIZING(MANUAL TYPE)-CIRCULATION PUMP MAKE:GUMI(KOREA) YEAR:2012 2-7 .ANODIZING(MANUAL TYPE)-CONTROL PANEL MAKE:DONGLAK(KOREA) YEAR:2012 3-1. BUFFING LINE-POLISHING MACHINE MAKE:BANDO(KOREA) YEAR:2012 CAP': 4,000EA/DAY×3EA 3-2. BUFFING LINE-DUST COLLECTOR MAKE:BUZA(KOREA) YEAR:2012 3-3. BUFFING LINE-AIR COMPERSSOR MAKE:ATLAS(USA) 3-4 BUFFING LINE-ULTRANIC CLEANER MAKE:UZU(KOREA) YEAR:2012 6. PURE WATER PRODUCTION EQUIPMENT MAKE:BOSUNG(KOREA) YEAR:2012 CAP': 3?/HR 8. HYDRAULIC PRESS MAKE:DONGJIN(KOREA) YEAR:2013 CAP': MAX.20TON STROKE: 150MM OPEN HEIGHT: 350MM BOLSTER SIZE: 700×400MM MAIN MOTOR: 3.75KW 10. ANODIZING LINE(ELECTRO COATING) MAKE:DAEHUNG(KOREA) YEAR:2012 11. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 CONVEYOR TYPE CONVEYOR: W900MM CHAMBER INNER SIZE :1900×1280×915HMM GUN: 12SET JET NOZZLE: ?3.2MM 14 .AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2012 15. AUTO SAND BLAST M/C MAKE:HANKOOK(KOREA) YEAR:2015 MAIN TURNTABLE ?650MM 6MULTI TABLE 8NOZZLE UNIT BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:PAEKJS1961@GMAIL.COM MOBILE)+82-10-7499-2567
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-max. 100 kg flour, approx. 150 kg dough\r\n2 speeds, 2 timers, safety  device\r\n MAX. 100 KG FLOUR, APPROX. 150 KG DOUGH\R\N2 SPEEDS, 2 TIMERS, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-max. rolls of steel width: 1300 mm	
max. plate thickness: 2 mm	
max. rolls of steel weight: 15 t	
rolls of steel internal diameter: 508 - 610 mm	
max. rolls of steel outer diameter: 2000 mm	
min. steel belt width: 30 mm	
max. steel belt weight: 5 t	
steel belt-internal diameter: 508 mm	
                                                                          MAX. ROLLS OF STEEL WIDTH: 1300 MM MAX. PLATE THICKNESS: 2 MM MAX. ROLLS OF STEEL WEIGHT: 15 T ROLLS OF STEEL INTERNAL DIAMETER: 508 - 610 MM MAX. ROLLS OF STEEL OUTER DIAMETER: 2000 MM MIN. STEEL BELT WIDTH: 30 MM MAX. STEEL BELT WEIGHT: 5 T STEEL BELT-INTERNAL DIAMETER: 508 MM
Vendedor: AMARON s.r.o.
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds,  timers\r\ndigital instruments, 2 stainless steel bowls,\r\ndoughhook stainless steel, safety device, \r\n MAX. 50 KG FLOUR, 2 SPEEDS, TIMERS\R\NDIGITAL INSTRUMENTS, 2 STAINLESS STEEL BOWLS,\R\NDOUGHHOOK STAINLESS STEEL, SAFETY DEVICE, \R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-clerk dough divider
bread abwieger 200 to 1250 g hopper 70 kg teflon coated
led display
with central lubrication
machine mobile with 2 stops
long adjustable outfeed conveyor
connection 400v, 16a-cee plug
second-hand machine cleaned and checked CLERK DOUGH DIVIDER BREAD ABWIEGER 200 TO 1250 G HOPPER 70 KG TEFLON COATED LED DISPLAY WITH CENTRAL LUBRICATION MACHINE MOBILE WITH 2 STOPS LONG ADJUSTABLE OUTFEED CONVEYOR CONNECTION 400V, 16A-CEE PLUG SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, protection device\r\n MAX. 50 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, PROTECTION DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-sling table
with solid beechwood top
conveyor belt centered
with cross design with hinged pull-out sheet edition
stainless steel execution
table mobile
connection 400v, 16a-cee plug
used equipment reconditioned with warranty SLING TABLE WITH SOLID BEECHWOOD TOP CONVEYOR BELT CENTERED WITH CROSS DESIGN WITH HINGED PULL-OUT SHEET EDITION STAINLESS STEEL EXECUTION TABLE MOBILE CONNECTION 400V, 16A-CEE PLUG USED EQUIPMENT RECONDITIONED WITH WARRANTY
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear SIZES FROM 5 KG DOUGH/7 LTR. UNTIL 60 KG/75 LTR.\R\N1 SPEED (OPTIONAL WITH 2 SPEEDS), WHITE PAINTED STEEL BODY, BOWL + SPIRAL + DOUGH DEFLECTOR + SAFETY RACK MADE OF STAINLESS STEEL\R\NBOWL IS COUNTERROTATING (OPTIONAL WITH REMOVABLE BOWL)\R\NCHAIN DRIVE, SELF-OILING STEP-DOWN-GEAR
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-compact pretzel long roller with cone winder
and feeder universe kasper model: lwt 3/80 premium eb ii w 20 for all poles like kornspitz and fritters, etc. 
universal - suits - winding machine
for all dough to the winding and long roll
long working width 800 mm
the work plate bottom cleaning device
total effective way over 2 levels 2, 5 m
dough deposit of 40-300 grams
stainless steel, bj. 2004
with eb2 feeding device before rolling mill viper
for roll systems with lateral discharge
connection 400v, 16a-cee plug
dimensions: 2200 x 1000 x 1800 mm wxdxh
second-hand machine cleaned and checked COMPACT PRETZEL LONG ROLLER WITH CONE WINDER AND FEEDER UNIVERSE KASPER MODEL: LWT 3/80 PREMIUM EB II W 20 FOR ALL POLES LIKE KORNSPITZ AND FRITTERS, ETC. UNIVERSAL - SUITS - WINDING MACHINE FOR ALL DOUGH TO THE WINDING AND LONG ROLL LONG WORKING WIDTH 800 MM THE WORK PLATE BOTTOM CLEANING DEVICE TOTAL EFFECTIVE WAY OVER 2 LEVELS 2, 5 M DOUGH DEPOSIT OF 40-300 GRAMS STAINLESS STEEL, BJ. 2004 WITH EB2 FEEDING DEVICE BEFORE ROLLING MILL VIPER FOR ROLL SYSTEMS WITH LATERAL DISCHARGE CONNECTION 400V, 16A-CEE PLUG DIMENSIONS: 2200 X 1000 X 1800 MM WXDXH SECOND-HAND MACHINE CLEANED AND CHECKED
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-cylinder 30 l, cylinder inside stainless steel\r\n          dimensions: d 310 mm, h 400 mm CYLINDER 30 L, CYLINDER INSIDE STAINLESS STEEL\R\N DIMENSIONS: D 310 MM, H 400 MM
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-deck baking oven electric oven

miwe condo c-4-128 as

as control
heat and lower heat individually adjustable
for sheets 600 x 400 and 600 x 800 mm stainless steel
oven with a fermentation room and as control
4 qm baking surface (4 floors 1200 x 800 mm) connection 400v, 43,5 kw, 4 x 32a-cee plug, water connection 3/4 inch
dimensions: 1500 x 1500 x 2000 mm wxdxh
used unit without guarantee for export
DECK BAKING OVEN ELECTRIC OVEN MIWE CONDO C-4-128 AS AS CONTROL HEAT AND LOWER HEAT INDIVIDUALLY ADJUSTABLE FOR SHEETS 600 X 400 AND 600 X 800 MM STAINLESS STEEL OVEN WITH A FERMENTATION ROOM AND AS CONTROL 4 QM BAKING SURFACE (4 FLOORS 1200 X 800 MM) CONNECTION 400V, 43,5 KW, 4 X 32A-CEE PLUG, WATER CONNECTION 3/4 INCH DIMENSIONS: 1500 X 1500 X 2000 MM WXDXH USED UNIT WITHOUT GUARANTEE FOR EXPORT
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-max. 160 kg dough, 2 speeds, 2 timers\r\n1 moveablel stainless steel bowls,\r\nhydraulik bowl fixing, savety device MAX. 160 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\N1 MOVEABLEL STAINLESS STEEL BOWLS,\R\NHYDRAULIK BOWL FIXING, SAVETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-deck baking oven electric oven

miwe condo c-4-68

as control
heat and lower heat individually adjustable
for sheets 600 x 400 and 600 x 800 mm stainless steel
oven with a fermentation room and as control
4 back floors connection 400v, 20.5 kw, 2 x 32a-cee plug, water connection 3/4 inch
dimensions: 900 x 1200 x 2000 mm wxdxh
used unit without guarantee for export DECK BAKING OVEN ELECTRIC OVEN MIWE CONDO C-4-68 AS CONTROL HEAT AND LOWER HEAT INDIVIDUALLY ADJUSTABLE FOR SHEETS 600 X 400 AND 600 X 800 MM STAINLESS STEEL OVEN WITH A FERMENTATION ROOM AND AS CONTROL 4 BACK FLOORS CONNECTION 400V, 20.5 KW, 2 X 32A-CEE PLUG, WATER CONNECTION 3/4 INCH DIMENSIONS: 900 X 1200 X 2000 MM WXDXH USED UNIT WITHOUT GUARANTEE FOR EXPORT
Vendedor: Milbrandt GmbH
Año de construcción: usado
Ubicación: Land-stainless steel, cap. 350 - 600 kg/h, \r\nmince by knives, 1 output\r\nincl.  sieve  10 + 8 mm\r\n STAINLESS STEEL, CAP. 350 - 600 KG/H, \R\NMINCE BY KNIVES, 1 OUTPUT\R\NINCL. SIEVE 10 + 8 MM\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-control: siemens 840 c.
chuck: vdi 30

main spindle:
spindle bore: 56 mm
bar passage: 42 mm
speed: 31-6300 rpm
c-axis

counter spindle:
bar passage: 42 mm
speed: 0-5000 rpm

travel slide 1
plan travel: 155 mm
longitudinal travel: 280 mm

travel slide 2
plan travel: 82 mm
longitudinal travel: 120 mm
2 revolver with 8 stations per each (4 of them powered)
speed powered tools: 0-5000 rpm

accessories:
part catcher, collet chuck, 3 - jaw chuck with various jaws, various tool holder and powered tools, conveyors, bar feeder simag 65.1 3200 mm  CONTROL: SIEMENS 840 C. CHUCK: VDI 30 MAIN SPINDLE: SPINDLE BORE: 56 MM BAR PASSAGE: 42 MM SPEED: 31-6300 RPM C-AXIS COUNTER SPINDLE: BAR PASSAGE: 42 MM SPEED: 0-5000 RPM TRAVEL SLIDE 1 PLAN TRAVEL: 155 MM LONGITUDINAL TRAVEL: 280 MM TRAVEL SLIDE 2 PLAN TRAVEL: 82 MM LONGITUDINAL TRAVEL: 120 MM 2 REVOLVER WITH 8 STATIONS PER EACH (4 OF THEM POWERED) SPEED POWERED TOOLS: 0-5000 RPM ACCESSORIES: PART CATCHER, COLLET CHUCK, 3 - JAW CHUCK WITH VARIOUS JAWS, VARIOUS TOOL HOLDER AND POWERED TOOLS, CONVEYORS, BAR FEEDER SIMAG 65.1 3200 MM
Vendedor: Theo Stefan OG
Año de construcción: usado
Ubicación: Land-max. 80 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl, safety device\r\n MAX. 80 KG DOUGH, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-planetary mixer equipped with air intake
brand: tonelli
model: universal
capacity 120 liters

possibility of supplementary bowls

possibility of refurbishing service
 PLANETARY MIXER EQUIPPED WITH AIR INTAKE BRAND: TONELLI MODEL: UNIVERSAL CAPACITY 120 LITERS POSSIBILITY OF SUPPLEMENTARY BOWLS POSSIBILITY OF REFURBISHING SERVICE
Vendedor: Officine Meccaniche Astra srl
Año de construcción: usado
Ubicación: Land-max. 125 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, safety  device\r\n MAX. 125 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 24.000 €
Ubicación: Land-
machine type machining center - vertical make victor type vc 55 year 2000 control type cnc storage france country of origin taiwan delivery immediately cargo base stock haguenau france technical details

x trail 550 mm y route 460 mm z-way 460 mm table size 800 x 460 mm spindle retainer iso bt 40 spindle unloading 476 mm distance spindle nose and table 150-660 mm workpiece weight of 600 kg max speed range 20-8000 rpm feeds - longitudinal/transverse/vertical 24000 mm / min  
rapid traverse - longitudinal/transverse/vertical 30 m / min number of tool magazine 24 additional information

accessories: coolant system
 cnc control fanuc om-pallet exchange table
 and spaenefoerderer MACHINE TYPE MACHINING CENTER - VERTICAL MAKE VICTOR TYPE VC 55 YEAR 2000 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN TAIWAN DELIVERY IMMEDIATELY CARGO BASE STOCK HAGUENAU FRANCE TECHNICAL DETAILS X TRAIL 550 MM Y ROUTE 460 MM Z-WAY 460 MM TABLE SIZE 800 X 460 MM SPINDLE RETAINER ISO BT 40 SPINDLE UNLOADING 476 MM DISTANCE SPINDLE NOSE AND TABLE 150-660 MM WORKPIECE WEIGHT OF 600 KG MAX SPEED RANGE 20-8000 RPM FEEDS - LONGITUDINAL/TRANSVERSE/VERTICAL 24000 MM / MIN RAPID TRAVERSE - LONGITUDINAL/TRANSVERSE/VERTICAL 30 M / MIN NUMBER OF TOOL MAGAZINE 24 ADDITIONAL INFORMATION ACCESSORIES: COOLANT SYSTEM CNC CONTROL FANUC OM-PALLET EXCHANGE TABLE AND SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-max.  75 kg flour, 2 speeds, saftey device\r\nbowl + doughhook stainless steel\r\n MAX. 75 KG FLOUR, 2 SPEEDS, SAFTEY DEVICE\R\NBOWL + DOUGHHOOK STAINLESS STEEL\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 115.000 €
Ubicación: Land-
machine type cnc lathe make nakamura type super ntj built in 2003 control type cnc storage france country of origin japan delivery time upon request of freight base from site technical details

turning diameter 190 mm turning length 700 mm control fanuc 18 itb speed 5,000 r/min rapid traverse rate: 16,40.6 (x, y, z) 15/11 kw main/counter spindle kw number tools 2 x 12 / 2 x 24 pcs 
tool holder directly number of axles 9-controlled st. 
driven tools 12 per turret conveyors mayfran eject of right kw clamping cylinder bar passage 82 duty hours 3000 h machine weight 13 tons of additional information

engine type: horizontal
 counter spindle
 clamping spindle: hainbuch modular gr 65 + 3 jaw chuck
 spannmitel counter spindle: hainbuch spanntop combi pull gr 65 + 3 jaw chuck
 y-axis +-45 mm
 b-axis +-91 â° on upper turret
 nt-nurse + nc kit
 feed blow out from the outside on main spindle coolant and air through the counter spindle
 precast grippers g/l 165 mm d 65 mm, 3 kg
 part on a tray
 handwheel

and 12-driven tool holders
 12 fixed holder
 spaenefoerderer MACHINE TYPE CNC LATHE MAKE NAKAMURA TYPE SUPER NTJ BUILT IN 2003 CONTROL TYPE CNC STORAGE FRANCE COUNTRY OF ORIGIN JAPAN DELIVERY TIME UPON REQUEST OF FREIGHT BASE FROM SITE TECHNICAL DETAILS TURNING DIAMETER 190 MM TURNING LENGTH 700 MM CONTROL FANUC 18 ITB SPEED 5,000 R/MIN RAPID TRAVERSE RATE: 16,40.6 (X, Y, Z) 15/11 KW MAIN/COUNTER SPINDLE KW NUMBER TOOLS 2 X 12 / 2 X 24 PCS TOOL HOLDER DIRECTLY NUMBER OF AXLES 9-CONTROLLED ST. DRIVEN TOOLS 12 PER TURRET CONVEYORS MAYFRAN EJECT OF RIGHT KW CLAMPING CYLINDER BAR PASSAGE 82 DUTY HOURS 3000 H MACHINE WEIGHT 13 TONS OF ADDITIONAL INFORMATION ENGINE TYPE: HORIZONTAL COUNTER SPINDLE CLAMPING SPINDLE: HAINBUCH MODULAR GR 65 + 3 JAW CHUCK SPANNMITEL COUNTER SPINDLE: HAINBUCH SPANNTOP COMBI PULL GR 65 + 3 JAW CHUCK Y-AXIS +-45 MM B-AXIS +-91 &ACIRC;&DEG; ON UPPER TURRET NT-NURSE + NC KIT FEED BLOW OUT FROM THE OUTSIDE ON MAIN SPINDLE COOLANT AND AIR THROUGH THE COUNTER SPINDLE PRECAST GRIPPERS G/L 165 MM D 65 MM, 3 KG PART ON A TRAY HANDWHEEL AND 12-DRIVEN TOOL HOLDERS 12 FIXED HOLDER SPAENEFOERDERER
Vendedor: SOCIETE FIMOTEC
Año de construcción: usado
Ubicación: Land-max. 15 kg flour/ 24 kg dough, 2 speeds,  timer,\r\nstainless steel bowl + spiral, safety device MAX. 15 KG FLOUR/ 24 KG DOUGH, 2 SPEEDS, TIMER,\R\NSTAINLESS STEEL BOWL + SPIRAL, SAFETY DEVICE
Vendedor: Thünnesen GmbH
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-mini mono block system "monomatic"; capacity: approx. 550 bottles / hour:

stations:
-3 x filler for round bottles, diameter and height variable.
-capper pp 28 s (ansrollschraubverschluss)
capsule distributor/shrinker
-labelling unit (front / back)
lot no. stempler

each station can be individually controlled or out / be switched on, so that e.g. only can be labelled.

video on youtube: abcs://youtu.be/gja3vz4ali0

year 2008, manufacturer: tem - toscana enologica mori (italy)

plant is still in operation and can be given due to new acquisition due to capacity expansion from approximately 04/2019    MINI MONO BLOCK SYSTEM "MONOMATIC"; CAPACITY: APPROX. 550 BOTTLES / HOUR: STATIONS: -3 X FILLER FOR ROUND BOTTLES, DIAMETER AND HEIGHT VARIABLE. -CAPPER PP 28 S (ANSROLLSCHRAUBVERSCHLUSS) CAPSULE DISTRIBUTOR/SHRINKER -LABELLING UNIT (FRONT / BACK) LOT NO. STEMPLER EACH STATION CAN BE INDIVIDUALLY CONTROLLED OR OUT / BE SWITCHED ON, SO THAT E.G. ONLY CAN BE LABELLED. VIDEO ON YOUTUBE: ABCS://YOUTU.BE/GJA3VZ4ALI0 YEAR 2008, MANUFACTURER: TEM - TOSCANA ENOLOGICA MORI (ITALY) PLANT IS STILL IN OPERATION AND CAN BE GIVEN DUE TO NEW ACQUISITION DUE TO CAPACITY EXPANSION FROM APPROXIMATELY 04/2019
Vendedor: MET Amensis Kellerei
Año de construcción: usado
Ubicación: Land-diameter: 4mm max., shaft length: 40mm max., output: 130-310pieces/min, wire section: 50mm max.  DIAMETER: 4MM MAX., SHAFT LENGTH: 40MM MAX., OUTPUT: 130-310PIECES/MIN, WIRE SECTION: 50MM MAX.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl + spiral, safety device\r\n MAX. 50 KG FLOUR, 2 SPEEDS, 2 TIMERS\R\NSTAINLESS STEEL BOWL + SPIRAL, SAFETY DEVICE\R\N
Vendedor: Thünnesen GmbH
Año de construcción: usado
Ubicación: Land-vertical - cnc machining center hermle c 800 u

with train control heidenhain tnc 430
year of construction: 2004 traverse paths: x 800 y 600 z 500
speed range: 0 - 16,000 rpm continuously (sk 40) with the following accessories:

solid angle table 1000 x 560 mm clamping surface
turn adjuster integrated in the left part of the wall with collet chuck and tailstock
vertical tool changer with 30 magazine places (sk 40)
1 high-speed spindle 50000 rpm
1 high on spindle 70000 rpm
prepared ikz
chip conveyor
3d measuring probe renishaw mp 10
tool breakage detection
electronic handwheel
electronic heat compensation y/z axis
oil mist extraction
chip washing gun
ethernet interface
full cab with sliding door and interior light
coolant system
4 adjustable mounts
operating instructions VERTICAL - CNC MACHINING CENTER HERMLE C 800 U WITH TRAIN CONTROL HEIDENHAIN TNC 430 YEAR OF CONSTRUCTION: 2004 TRAVERSE PATHS: X 800 Y 600 Z 500 SPEED RANGE: 0 - 16,000 RPM CONTINUOUSLY (SK 40) WITH THE FOLLOWING ACCESSORIES: SOLID ANGLE TABLE 1000 X 560 MM CLAMPING SURFACE TURN ADJUSTER INTEGRATED IN THE LEFT PART OF THE WALL WITH COLLET CHUCK AND TAILSTOCK VERTICAL TOOL CHANGER WITH 30 MAGAZINE PLACES (SK 40) 1 HIGH-SPEED SPINDLE 50000 RPM 1 HIGH ON SPINDLE 70000 RPM PREPARED IKZ CHIP CONVEYOR 3D MEASURING PROBE RENISHAW MP 10 TOOL BREAKAGE DETECTION ELECTRONIC HANDWHEEL ELECTRONIC HEAT COMPENSATION Y/Z AXIS OIL MIST EXTRACTION CHIP WASHING GUN ETHERNET INTERFACE FULL CAB WITH SLIDING DOOR AND INTERIOR LIGHT COOLANT SYSTEM 4 ADJUSTABLE MOUNTS OPERATING INSTRUCTIONS
Vendedor: Martin Beschle Werkzeuge & Maschinen GmbH
Año de construcción: usado
Ubicación: Land-cap. 80 - 100 flour\r\ndimensions: 80 x 60 x 145 cm\r\nweight:       75 kg \r\n\r\n CAP. 80 - 100 FLOUR\R\NDIMENSIONS: 80 X 60 X 145 CM\R\NWEIGHT: 75 KG \R\N\R\N
Vendedor: Thünnesen GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more INTERNATIONAL types: