16 ofertas

Año de construcción: usado
Ubicación: Land-an affordable entry into the water jet cutting. economical solution for 3-axis or abrasive 2d cutting. 

table 1,500 x 3,000 mm
the z axis stroke 200 mm
working height 800 mm
table load 800 kg / m â²

max working speed 12, 000 mm/min
optionally, 16 000 mm/min
max express gear speed 30 000 mm/min

repeatability +/-0.1 mm
positioning accuracy +/-0.05 mm / 300 mm

high pressure pump hã¤rtel powerline 3741 classic
max working pressure 4.130 bar
power 37 kw
displacement 3.8 l / min
control plc
siemens electric motor
intensifier (amplifier) h2o jet standard equipment:
easy to use control p 886
igems software with nesting level 1
macro program (cycles)
handwheel
dosing system fill tray 250 kg capacity
water stop
height sensor
high pressure pump 37kw / 4,100 bar
hd package
ce standard

AN AFFORDABLE ENTRY INTO THE WATER JET CUTTING. ECONOMICAL SOLUTION FOR 3-AXIS OR ABRASIVE 2D CUTTING. TABLE 1,500 X 3,000 MM THE Z AXIS STROKE 200 MM WORKING HEIGHT 800 MM TABLE LOAD 800 KG / M ² MAX WORKING SPEED 12, 000 MM/MIN OPTIONALLY, 16 000 MM/MIN MAX EXPRESS GEAR SPEED 30 000 MM/MIN REPEATABILITY +/-0.1 MM POSITIONING ACCURACY +/-0.05 MM / 300 MM HIGH PRESSURE PUMP HäRTEL POWERLINE 3741 CLASSIC MAX WORKING PRESSURE 4.130 BAR POWER 37 KW DISPLACEMENT 3.8 L / MIN CONTROL PLC SIEMENS ELECTRIC MOTOR INTENSIFIER (AMPLIFIER) H2O JET STANDARD EQUIPMENT: EASY TO USE CONTROL P 886 IGEMS SOFTWARE WITH NESTING LEVEL 1 MACRO PROGRAM (CYCLES) HANDWHEEL DOSING SYSTEM FILL TRAY 250 KG CAPACITY WATER STOP HEIGHT SENSOR HIGH PRESSURE PUMP 37KW / 4,100 BAR HD PACKAGE CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-max working pressure 4.130 bar
power 37 kw
displacement 3.8 l / min
minimum. pressure of the water jet 3.5 bar
maximum pressure of the water jet 6.0 bar
number of pressure levels
piece 10, umschaltbar(9 druckstufen + 0)

siemens electric motor
hydraulic pump parker
control plc

1 690 mm
1,550 mm wide
height 1 550 mm
total weight 1 800 kg
hydraulic oil filling 170 liters
hydraulic oil type hm 46

equipment standard: amplifier (intensifier), h2o jet two-stage filtration unit for mechanical filtration of inlet water automatic bleed valve as a safety element that the hp hose pressure makes, if the pump is stopped slower pressure increase, pressure surges and electrical start-up current reduces internal diagnostic system, which stops the pump when the limits are exceeded air coolers for hydraulic oil with closed cooling circuit, integrated in the high pressure pump electric control panel for delta / star starting, integrated in the high pressure pump control panel with signal lamp MAX WORKING PRESSURE 4.130 BAR POWER 37 KW DISPLACEMENT 3.8 L / MIN MINIMUM. PRESSURE OF THE WATER JET 3.5 BAR MAXIMUM PRESSURE OF THE WATER JET 6.0 BAR NUMBER OF PRESSURE LEVELS PIECE 10, UMSCHALTBAR(9 DRUCKSTUFEN + 0) SIEMENS ELECTRIC MOTOR HYDRAULIC PUMP PARKER CONTROL PLC 1 690 MM 1,550 MM WIDE HEIGHT 1 550 MM TOTAL WEIGHT 1 800 KG HYDRAULIC OIL FILLING 170 LITERS HYDRAULIC OIL TYPE HM 46 EQUIPMENT STANDARD: AMPLIFIER (INTENSIFIER), H2O JET TWO-STAGE FILTRATION UNIT FOR MECHANICAL FILTRATION OF INLET WATER AUTOMATIC BLEED VALVE AS A SAFETY ELEMENT THAT THE HP HOSE PRESSURE MAKES, IF THE PUMP IS STOPPED SLOWER PRESSURE INCREASE, PRESSURE SURGES AND ELECTRICAL START-UP CURRENT REDUCES INTERNAL DIAGNOSTIC SYSTEM, WHICH STOPS THE PUMP WHEN THE LIMITS ARE EXCEEDED AIR COOLERS FOR HYDRAULIC OIL WITH CLOSED COOLING CIRCUIT, INTEGRATED IN THE HIGH PRESSURE PUMP ELECTRIC CONTROL PANEL FOR DELTA / STAR STARTING, INTEGRATED IN THE HIGH PRESSURE PUMP CONTROL PANEL WITH SIGNAL LAMP
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-max working pressure 4.130 bar
power 37 kw
displacement 3.8 l / min
minimum. pressure of the water jet 3.5 bar
maximum pressure of the water jet 6.0 bar
number of pressure levels
piece 3, umschaltbar(2 druckstufen + 0)

siemens electric motor
hydraulic pump parker
control plc

1 690 mm
1,550 mm wide
height 1 200 mm
total weight 1 550 kg
hydraulic oil filling 170 liters
hydraulic oil type hm 46

equipment standard: amplifier (intensifier), h2o jet two-stage filtration unit for mechanical filtration of inlet water automatic bleed valve as a safety element that the hp hose pressure makes, if the pump is stopped slower pressure increase, pressure surges and electrical start-up current reduces internal diagnostic system, which stops the pump when the limits are exceeded air coolers for hydraulic oil with closed cooling circuit, integrated in the high pressure pump electric control panel for delta / star starting, integrated in the high pressure pump control panel with signal lamp MAX WORKING PRESSURE 4.130 BAR POWER 37 KW DISPLACEMENT 3.8 L / MIN MINIMUM. PRESSURE OF THE WATER JET 3.5 BAR MAXIMUM PRESSURE OF THE WATER JET 6.0 BAR NUMBER OF PRESSURE LEVELS PIECE 3, UMSCHALTBAR(2 DRUCKSTUFEN + 0) SIEMENS ELECTRIC MOTOR HYDRAULIC PUMP PARKER CONTROL PLC 1 690 MM 1,550 MM WIDE HEIGHT 1 200 MM TOTAL WEIGHT 1 550 KG HYDRAULIC OIL FILLING 170 LITERS HYDRAULIC OIL TYPE HM 46 EQUIPMENT STANDARD: AMPLIFIER (INTENSIFIER), H2O JET TWO-STAGE FILTRATION UNIT FOR MECHANICAL FILTRATION OF INLET WATER AUTOMATIC BLEED VALVE AS A SAFETY ELEMENT THAT THE HP HOSE PRESSURE MAKES, IF THE PUMP IS STOPPED SLOWER PRESSURE INCREASE, PRESSURE SURGES AND ELECTRICAL START-UP CURRENT REDUCES INTERNAL DIAGNOSTIC SYSTEM, WHICH STOPS THE PUMP WHEN THE LIMITS ARE EXCEEDED AIR COOLERS FOR HYDRAULIC OIL WITH CLOSED COOLING CIRCUIT, INTEGRATED IN THE HIGH PRESSURE PUMP ELECTRIC CONTROL PANEL FOR DELTA / STAR STARTING, INTEGRATED IN THE HIGH PRESSURE PUMP CONTROL PANEL WITH SIGNAL LAMP
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-abrasive water jet cutting system 3-axis version with large portal. user-friendly control and bedienbarekeit.
new machine,

workspace
-x axis. . 3.000 mm
-y axis. .14.000 mm
z axis. . 500 mm
-z axis movement by brushless motor

table load max 800 kg / m â²
 
working speeds of the x - and y-axis:
-maximum cutting speed (x, y)... 15,000 mm / min
-max (x, y)... 30, 000 mm / min
 
working speeds of the z-axis:
-manual feeding. . 5000 mm / min
-manual downfeed... 2,000 mm / min
-automatic up and down... 5000 mm / min
 
positioning accuracy:
-repeatability... 0.03 mm
-positioning accuracy.  0.05 mm / 300 mm

technical parameters:
â?¢ base steel bearing with steel portal low longitudinal axis for better table
â?¢ stability, precise cutting, and easier access to the work area â?¢ y axis length up to 30 m can be extended
â?¢ modular table design with 2 portal heights.
â?¢ a new concept for the z axis with a height of 500 mm for cutting materials up to 320 mm (3d) / 500 mm (2d) thickness.
â?¢ new design of cnc - table - and control panel with a focus on ergonomics
â?¢ use of materials with high resistance.
â?¢ high and extremely robust structure.
â?¢ precise linear motion with ball rollers
â?¢ hardened and ground gear rack and pinion.
â?¢ extremely robust servo motors in conjunction with precise gears
â?¢ water stop
â?¢ cnc simullator
â?¢ linear measuring system
â?¢ leg cover made of stainless steel
â?¢ ce standard ABRASIVE WATER JET CUTTING SYSTEM 3-AXIS VERSION WITH LARGE PORTAL. USER-FRIENDLY CONTROL AND BEDIENBAREKEIT. NEW MACHINE, WORKSPACE -X AXIS. . 3.000 MM -Y AXIS. .14.000 MM Z AXIS. . 500 MM -Z AXIS MOVEMENT BY BRUSHLESS MOTOR TABLE LOAD MAX 800 KG / M ² WORKING SPEEDS OF THE X - AND Y-AXIS: -MAXIMUM CUTTING SPEED (X, Y)... 15,000 MM / MIN -MAX (X, Y)... 30, 000 MM / MIN WORKING SPEEDS OF THE Z-AXIS: -MANUAL FEEDING. . 5000 MM / MIN -MANUAL DOWNFEED... 2,000 MM / MIN -AUTOMATIC UP AND DOWN... 5000 MM / MIN POSITIONING ACCURACY: -REPEATABILITY... 0.03 MM -POSITIONING ACCURACY. 0.05 MM / 300 MM TECHNICAL PARAMETERS: Â?¢ BASE STEEL BEARING WITH STEEL PORTAL LOW LONGITUDINAL AXIS FOR BETTER TABLE Â?¢ STABILITY, PRECISE CUTTING, AND EASIER ACCESS TO THE WORK AREA Â?¢ Y AXIS LENGTH UP TO 30 M CAN BE EXTENDED Â?¢ MODULAR TABLE DESIGN WITH 2 PORTAL HEIGHTS. Â?¢ A NEW CONCEPT FOR THE Z AXIS WITH A HEIGHT OF 500 MM FOR CUTTING MATERIALS UP TO 320 MM (3D) / 500 MM (2D) THICKNESS. Â?¢ NEW DESIGN OF CNC - TABLE - AND CONTROL PANEL WITH A FOCUS ON ERGONOMICS Â?¢ USE OF MATERIALS WITH HIGH RESISTANCE. Â?¢ HIGH AND EXTREMELY ROBUST STRUCTURE. Â?¢ PRECISE LINEAR MOTION WITH BALL ROLLERS Â?¢ HARDENED AND GROUND GEAR RACK AND PINION. Â?¢ EXTREMELY ROBUST SERVO MOTORS IN CONJUNCTION WITH PRECISE GEARS Â?¢ WATER STOP Â?¢ CNC SIMULLATOR Â?¢ LINEAR MEASURING SYSTEM Â?¢ LEG COVER MADE OF STAINLESS STEEL Â?¢ CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Precio: 31.200 €
Ubicación: Land-high pressure pumps for abrasive waterjet cutting. need a powerful high pressure pump suitable for company. but for that issue their own machines, components, parts or small series.

max working pressure 4.130 bar
power 22 kw
displacement of 2.2 l / min
minimum. pressure of the water jet 3.5 bar
maximum pressure of the water jet 6.0 bar
number of pressure levels piece 10 switchable (9 compression + 0) electric motor worldwide electronic corporation hydraulic pump casappa
control plc
 
length 1,600 mm
width 1,200 mm
height 1,200 mm
total weight of 1,720 kg
hydraulic oil filling 140 litres
hydraulic oil type tl 46

equipment standard: amplifier (intensifier), h2o jet oil cooling of hydraulic oil, standard: oil / air (cell cooler with fan) hp pump includes: two-stage mechanical filtration of inlet water filtration unit automatic vent valve as security element, makes the hp hose pressure slow pressure increase, pressure surges, when the pump is stopped and starting electricity reduces internal diagnostic system, which stops the pump when the limits are exceeded with the hp pump supplied standard equipment air coolers with hydraulic oil from the pump electric panel for delta / star start, pump control integrated in the pump: full-featured remote control of hp pump from the control system of the cutting table and the cutting program 10 pressure stages HIGH PRESSURE PUMPS FOR ABRASIVE WATERJET CUTTING. NEED A POWERFUL HIGH PRESSURE PUMP SUITABLE FOR COMPANY. BUT FOR THAT ISSUE THEIR OWN MACHINES, COMPONENTS, PARTS OR SMALL SERIES. MAX WORKING PRESSURE 4.130 BAR POWER 22 KW DISPLACEMENT OF 2.2 L / MIN MINIMUM. PRESSURE OF THE WATER JET 3.5 BAR MAXIMUM PRESSURE OF THE WATER JET 6.0 BAR NUMBER OF PRESSURE LEVELS PIECE 10 SWITCHABLE (9 COMPRESSION + 0) ELECTRIC MOTOR WORLDWIDE ELECTRONIC CORPORATION HYDRAULIC PUMP CASAPPA CONTROL PLC LENGTH 1,600 MM WIDTH 1,200 MM HEIGHT 1,200 MM TOTAL WEIGHT OF 1,720 KG HYDRAULIC OIL FILLING 140 LITRES HYDRAULIC OIL TYPE TL 46 EQUIPMENT STANDARD: AMPLIFIER (INTENSIFIER), H2O JET OIL COOLING OF HYDRAULIC OIL, STANDARD: OIL / AIR (CELL COOLER WITH FAN) HP PUMP INCLUDES: TWO-STAGE MECHANICAL FILTRATION OF INLET WATER FILTRATION UNIT AUTOMATIC VENT VALVE AS SECURITY ELEMENT, MAKES THE HP HOSE PRESSURE SLOW PRESSURE INCREASE, PRESSURE SURGES, WHEN THE PUMP IS STOPPED AND STARTING ELECTRICITY REDUCES INTERNAL DIAGNOSTIC SYSTEM, WHICH STOPS THE PUMP WHEN THE LIMITS ARE EXCEEDED WITH THE HP PUMP SUPPLIED STANDARD EQUIPMENT AIR COOLERS WITH HYDRAULIC OIL FROM THE PUMP ELECTRIC PANEL FOR DELTA / STAR START, PUMP CONTROL INTEGRATED IN THE PUMP: FULL-FEATURED REMOTE CONTROL OF HP PUMP FROM THE CONTROL SYSTEM OF THE CUTTING TABLE AND THE CUTTING PROGRAM 10 PRESSURE STAGES
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-stationary desilting plant of solids
top hanging bigbag

1 600 mm long
1 370 mm width
height. 2 800 mm
operating voltage 230v / 50 hz
power voltage.  24v ac
el.verbrauch asi 3 kw / h
el. protection. ip 65
operating temperature + 5 c 20a + 40 c.
operating pressure 0,4-0,5 mpa
compressed air consumption 8-45 m
weight approx. 600 kg
stock removal. max 350 kg

information on the system
the basic part of the abrasiventfernungssystems consists of a welded steel construction, on which all the necessary parts are arranged: a pneumatic pump, a slurry pump, an electronic control device for the operation, a mechanical hydro cyclone. stainless steel suction heads, through the water inside the container are + abrasive material is sucked in. this mixture continues through thick-walled tubes by means of air pump to hydro-cyclone, in which water is separated. then goes to hung up big-bag to be water in the auxiliary tank and solid particles. residual water flows through the big-bag to the auxiliary fuel tank and is then pumped through slurry pump in the strainer. big-bag is exchanged when it is filled STATIONARY DESILTING PLANT OF SOLIDS TOP HANGING BIGBAG 1 600 MM LONG 1 370 MM WIDTH HEIGHT. 2 800 MM OPERATING VOLTAGE 230V / 50 HZ POWER VOLTAGE. 24V AC EL.VERBRAUCH ASI 3 KW / H EL. PROTECTION. IP 65 OPERATING TEMPERATURE + 5 C 20A + 40 C. OPERATING PRESSURE 0,4-0,5 MPA COMPRESSED AIR CONSUMPTION 8-45 M WEIGHT APPROX. 600 KG STOCK REMOVAL. MAX 350 KG INFORMATION ON THE SYSTEM THE BASIC PART OF THE ABRASIVENTFERNUNGSSYSTEMS CONSISTS OF A WELDED STEEL CONSTRUCTION, ON WHICH ALL THE NECESSARY PARTS ARE ARRANGED: A PNEUMATIC PUMP, A SLURRY PUMP, AN ELECTRONIC CONTROL DEVICE FOR THE OPERATION, A MECHANICAL HYDRO CYCLONE. STAINLESS STEEL SUCTION HEADS, THROUGH THE WATER INSIDE THE CONTAINER ARE + ABRASIVE MATERIAL IS SUCKED IN. THIS MIXTURE CONTINUES THROUGH THICK-WALLED TUBES BY MEANS OF AIR PUMP TO HYDRO-CYCLONE, IN WHICH WATER IS SEPARATED. THEN GOES TO HUNG UP BIG-BAG TO BE WATER IN THE AUXILIARY TANK AND SOLID PARTICLES. RESIDUAL WATER FLOWS THROUGH THE BIG-BAG TO THE AUXILIARY FUEL TANK AND IS THEN PUMPED THROUGH SLURRY PUMP IN THE STRAINER. BIG-BAG IS EXCHANGED WHEN IT IS FILLED
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-water jet cutting system, as 3-axis version with ballscrew. suitable for pressure up to 4,136 bar. the cutting system is manufactured in europe and components of from well-known manufacturers are installed. the cnc control is an easy to use p 886

dimensions of the working surface of the machine:
-x-axis (portal). .2000 mm
-y-axis (legs).  1000 mm
z axis.  200 mm
-z axis movement by brushless motor
 
overall dimensions of the machine:
-x axis. .  3 420 mm
-y... 4,480 mm
-z axis... 1800 mm

working speeds of the x - and y-axis:
-max.. . 12.000 mm / min

travel speed of the x - and y-axis
-max.. 30, 000 mm / min

working speeds of the z-axis:
-manual supply.....  5000 mm / min
-manual downfeed....  2,000 mm / min
-automatic up - and downward movement. . 5000 mm / min
 
positioning rule:
-repeatability... 0.05 mm
-positioning accuracy. 0.05 mm / 300 mm
 
technical parameters:
compact table with many possibilities
-steel frame construction with integrated stainless steel strainer
-portal of the aluminium beams, which are completely covered by bar
-linear guides with ball rollers
-hardened rack and pinion made of stainless steel
-precision planetary gear with servo motors
-overstay by spraypainted sheet

standard equipment
    aperture, manual valve
    high pressure hose (10 m)
    training in the factory
    documentation
    ce standard WATER JET CUTTING SYSTEM, AS 3-AXIS VERSION WITH BALLSCREW. SUITABLE FOR PRESSURE UP TO 4,136 BAR. THE CUTTING SYSTEM IS MANUFACTURED IN EUROPE AND COMPONENTS OF FROM WELL-KNOWN MANUFACTURERS ARE INSTALLED. THE CNC CONTROL IS AN EASY TO USE P 886 DIMENSIONS OF THE WORKING SURFACE OF THE MACHINE: -X-AXIS (PORTAL). .2000 MM -Y-AXIS (LEGS). 1000 MM Z AXIS. 200 MM -Z AXIS MOVEMENT BY BRUSHLESS MOTOR OVERALL DIMENSIONS OF THE MACHINE: -X AXIS. . 3 420 MM -Y... 4,480 MM -Z AXIS... 1800 MM WORKING SPEEDS OF THE X - AND Y-AXIS: -MAX.. . 12.000 MM / MIN TRAVEL SPEED OF THE X - AND Y-AXIS -MAX.. 30, 000 MM / MIN WORKING SPEEDS OF THE Z-AXIS: -MANUAL SUPPLY..... 5000 MM / MIN -MANUAL DOWNFEED.... 2,000 MM / MIN -AUTOMATIC UP - AND DOWNWARD MOVEMENT. . 5000 MM / MIN POSITIONING RULE: -REPEATABILITY... 0.05 MM -POSITIONING ACCURACY. 0.05 MM / 300 MM TECHNICAL PARAMETERS: COMPACT TABLE WITH MANY POSSIBILITIES -STEEL FRAME CONSTRUCTION WITH INTEGRATED STAINLESS STEEL STRAINER -PORTAL OF THE ALUMINIUM BEAMS, WHICH ARE COMPLETELY COVERED BY BAR -LINEAR GUIDES WITH BALL ROLLERS -HARDENED RACK AND PINION MADE OF STAINLESS STEEL -PRECISION PLANETARY GEAR WITH SERVO MOTORS -OVERSTAY BY SPRAYPAINTED SHEET STANDARD EQUIPMENT APERTURE, MANUAL VALVE HIGH PRESSURE HOSE (10 M) TRAINING IN THE FACTORY DOCUMENTATION CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-3-axis abrasive water jet cutting machine up to 4,100 bar pressure. modern user-friendly control, version 3 axes
new machine

table size 2,000 x 3,000 mm
z axis 200 mm
table load default 800 kg / sqm

positioning accuracy +/-0,04 mm / 300 mm
repeatability +/-0.03 mm
maximum speed 16 000 mm / min
maximum lateral speed 20 000 mm / min

facilities:
â?¢ basic steel bearing structure with steel portal
â?¢ cnc-control p 886
â?¢ precision linear guides
â?¢ hardened and cut racks and stainless steel pinion
â?¢ precision planetary gearboxes with servo motors
â?¢ stainless steel cover
â?¢ cutting head for 3-axis machining with diamond nozzle
â?¢ pneumatic on / from valve
â?¢ hp valve
â?¢ proprotional funnel
â?¢ abrasive transport system 250 kg with red/green lamp and buzzer
â?¢ portal that is completely covered by bellows
â?¢ the machine feet is protected gearboxes, bearings and guides it through bellows movement
â?¢ z-axle with ball screw
â?¢ independent 6mm stainless steel bumper height of 800 mm with fins and work support grids
â?¢ for the capacity 800 kg per square meter
â?¢ automatic water level in the tank controls
â?¢ documentation in german / english 3-AXIS ABRASIVE WATER JET CUTTING MACHINE UP TO 4,100 BAR PRESSURE. MODERN USER-FRIENDLY CONTROL, VERSION 3 AXES NEW MACHINE TABLE SIZE 2,000 X 3,000 MM Z AXIS 200 MM TABLE LOAD DEFAULT 800 KG / SQM POSITIONING ACCURACY +/-0,04 MM / 300 MM REPEATABILITY +/-0.03 MM MAXIMUM SPEED 16 000 MM / MIN MAXIMUM LATERAL SPEED 20 000 MM / MIN FACILITIES: Â?¢ BASIC STEEL BEARING STRUCTURE WITH STEEL PORTAL Â?¢ CNC-CONTROL P 886 Â?¢ PRECISION LINEAR GUIDES Â?¢ HARDENED AND CUT RACKS AND STAINLESS STEEL PINION Â?¢ PRECISION PLANETARY GEARBOXES WITH SERVO MOTORS Â?¢ STAINLESS STEEL COVER Â?¢ CUTTING HEAD FOR 3-AXIS MACHINING WITH DIAMOND NOZZLE Â?¢ PNEUMATIC ON / FROM VALVE Â?¢ HP VALVE Â?¢ PROPROTIONAL FUNNEL Â?¢ ABRASIVE TRANSPORT SYSTEM 250 KG WITH RED/GREEN LAMP AND BUZZER Â?¢ PORTAL THAT IS COMPLETELY COVERED BY BELLOWS Â?¢ THE MACHINE FEET IS PROTECTED GEARBOXES, BEARINGS AND GUIDES IT THROUGH BELLOWS MOVEMENT Â?¢ Z-AXLE WITH BALL SCREW Â?¢ INDEPENDENT 6MM STAINLESS STEEL BUMPER HEIGHT OF 800 MM WITH FINS AND WORK SUPPORT GRIDS Â?¢ FOR THE CAPACITY 800 KG PER SQUARE METER Â?¢ AUTOMATIC WATER LEVEL IN THE TANK CONTROLS Â?¢ DOCUMENTATION IN GERMAN / ENGLISH
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

working surface of 2.000 x 4.000 mm
with automatic changing table
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
1000 w of fibercut
(fiber lasers from 500 w to 10,000 w available)
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard  HäRTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORKING SURFACE OF 2.000 X 4.000 MM WITH AUTOMATIC CHANGING TABLE TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M ² MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 1000 W OF FIBERCUT (FIBER LASERS FROM 500 W TO 10,000 W AVAILABLE) FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

working area 1,000 x 2,000 mm
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
1000 w of fibercut
(fiber lasers from 500 w to 10,000 w available)
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard  HäRTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORKING AREA 1,000 X 2,000 MM TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M ² MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 1000 W OF FIBERCUT (FIBER LASERS FROM 500 W TO 10,000 W AVAILABLE) FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-an affordable entry into the water jet cutting. economical solution for 3-axis or abrasive 2d cutting. 

table 1.500 x 2.000 mm
the z axis stroke 200 mm
working height 800 mm
table load 800 kg / m â²

max working speed 12, 000 mm/min
optionally, 16 000 mm/min
max express gear speed 30 000 mm/min

repeatability +/-0.1 mm
positioning accuracy +/-0.05 mm / 300 mm

standard equipment:
easy to use control p 886
igems software with nesting level 1
macro program (cycles)
handwheel
dosing system fill tray 250 kg capacity
water stop
height sensor
ce standard

AN AFFORDABLE ENTRY INTO THE WATER JET CUTTING. ECONOMICAL SOLUTION FOR 3-AXIS OR ABRASIVE 2D CUTTING. TABLE 1.500 X 2.000 MM THE Z AXIS STROKE 200 MM WORKING HEIGHT 800 MM TABLE LOAD 800 KG / M ² MAX WORKING SPEED 12, 000 MM/MIN OPTIONALLY, 16 000 MM/MIN MAX EXPRESS GEAR SPEED 30 000 MM/MIN REPEATABILITY +/-0.1 MM POSITIONING ACCURACY +/-0.05 MM / 300 MM STANDARD EQUIPMENT: EASY TO USE CONTROL P 886 IGEMS SOFTWARE WITH NESTING LEVEL 1 MACRO PROGRAM (CYCLES) HANDWHEEL DOSING SYSTEM FILL TRAY 250 KG CAPACITY WATER STOP HEIGHT SENSOR CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-working width mm 1.500
working length mm 3,000
opening in mm 250

total weight of the plant in 2,800 kg

repeat accuracy in mm +/-0.05
position accuracy in mm +/-0.1 cutting performance of hifokus 0-38 mm
cutting performance hyper term hpr 130 xd 0-38 mm

torch distance 0-200 mm speed max 35 m / min working height of 900 mm need 6 bar compressed air equipment the machine
hypertherm hpr 130xd plasma source automatic height control esa 505 s control metalix soft with automatic nesting hypertherm manual gas console automatic height control of ac servo motor-driven gearbox automatic opening of the suction zone on the table
mains voltage 400 v / 50 hz  WORKING WIDTH MM 1.500 WORKING LENGTH MM 3,000 OPENING IN MM 250 TOTAL WEIGHT OF THE PLANT IN 2,800 KG REPEAT ACCURACY IN MM +/-0.05 POSITION ACCURACY IN MM +/-0.1 CUTTING PERFORMANCE OF HIFOKUS 0-38 MM CUTTING PERFORMANCE HYPER TERM HPR 130 XD 0-38 MM TORCH DISTANCE 0-200 MM SPEED MAX 35 M / MIN WORKING HEIGHT OF 900 MM NEED 6 BAR COMPRESSED AIR EQUIPMENT THE MACHINE HYPERTHERM HPR 130XD PLASMA SOURCE AUTOMATIC HEIGHT CONTROL ESA 505 S CONTROL METALIX SOFT WITH AUTOMATIC NESTING HYPERTHERM MANUAL GAS CONSOLE AUTOMATIC HEIGHT CONTROL OF AC SERVO MOTOR-DRIVEN GEARBOX AUTOMATIC OPENING OF THE SUCTION ZONE ON THE TABLE MAINS VOLTAGE 400 V / 50 HZ
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-this cutting machine is built in 2009 and general overhaul in 2016.

table size 4.000 x 2.000 mm
z axis-height 300 mm

positioning accuracy +/-0, 1 mm / 300 mm
maximum speed 16 000 mm / min
maximum lateral speed 20 000 mm / min

number of z supports 2
lot of 2 cutting heads

1 x cutting head 3 axes
1 x cutting head 5-axis +/-45â°

high pressure pump h2o jet 3.8 / 60 compact amplifier, h2o jet model 1 pcs
max working pressure 415 mpa
power 37 kw
cutting water 3.8 l / min
siemens electric motor
hydraulic pump parker
control plc
number of pressure levels 10, switchable (9 compression + 0)
max weight 1 800 kg
max depth 1 550 mm
max width 1 690 mm
max height 1 550 mm
minimum. pressure of the water jet 3.5 bar
maximum pressure of the water jet 6 bar
ph of water cut 6-8
hydraulic oil filling 170 l
hydraulic oil type hm 46

hydraulic oil cooling standard: oil / air (zellenfã¶rmiger cooler with fan)
on request: oil / water (plate heat exchanger)

equipment of the machine
dosing system (new)
abrasive filling tank 250 kg (new)
cnc p 886 (last generation) control
2 x motorized z axis,
high pressure pump h2o jet 37 kw / 4.150 bar  THIS CUTTING MACHINE IS BUILT IN 2009 AND GENERAL OVERHAUL IN 2016. TABLE SIZE 4.000 X 2.000 MM Z AXIS-HEIGHT 300 MM POSITIONING ACCURACY +/-0, 1 MM / 300 MM MAXIMUM SPEED 16 000 MM / MIN MAXIMUM LATERAL SPEED 20 000 MM / MIN NUMBER OF Z SUPPORTS 2 LOT OF 2 CUTTING HEADS 1 X CUTTING HEAD 3 AXES 1 X CUTTING HEAD 5-AXIS +/-45° HIGH PRESSURE PUMP H2O JET 3.8 / 60 COMPACT AMPLIFIER, H2O JET MODEL 1 PCS MAX WORKING PRESSURE 415 MPA POWER 37 KW CUTTING WATER 3.8 L / MIN SIEMENS ELECTRIC MOTOR HYDRAULIC PUMP PARKER CONTROL PLC NUMBER OF PRESSURE LEVELS 10, SWITCHABLE (9 COMPRESSION + 0) MAX WEIGHT 1 800 KG MAX DEPTH 1 550 MM MAX WIDTH 1 690 MM MAX HEIGHT 1 550 MM MINIMUM. PRESSURE OF THE WATER JET 3.5 BAR MAXIMUM PRESSURE OF THE WATER JET 6 BAR PH OF WATER CUT 6-8 HYDRAULIC OIL FILLING 170 L HYDRAULIC OIL TYPE HM 46 HYDRAULIC OIL COOLING STANDARD: OIL / AIR (ZELLENFöRMIGER COOLER WITH FAN) ON REQUEST: OIL / WATER (PLATE HEAT EXCHANGER) EQUIPMENT OF THE MACHINE DOSING SYSTEM (NEW) ABRASIVE FILLING TANK 250 KG (NEW) CNC P 886 (LAST GENERATION) CONTROL 2 X MOTORIZED Z AXIS, HIGH PRESSURE PUMP H2O JET 37 KW / 4.150 BAR
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-cut laser 2000 w to the laser fiber. with housing. twin table 1,500 x 3,000 mm. 

hã¤rtel fiber laser cutting machine "bear craft" and "bear craft twin table" is made with efficient and ecological fiber laser technology with proven reliability and flexibility. only the focal length can be adjusted for different material thicknesses. here no constant is necessary lens replacement

work area 3.000 x 1.500 mm
travel in the z axis 180 mm
table load 200 kg / m â²

maximum no-load speed (max) m/min 169
maximum achsgeschwindigkeiten(x-u-y)m/min 120
acceleration idle g 1.5

fiber laser
2000 w of fibercut
focal length adjustment

facilities:
laser source of nlight alta
control esa s 670
esa control
cooling system
drawer system
cad / cam
nesting
ce standard CUT LASER 2000 W TO THE LASER FIBER. WITH HOUSING. TWIN TABLE 1,500 X 3,000 MM. HäRTEL FIBER LASER CUTTING MACHINE "BEAR CRAFT" AND "BEAR CRAFT TWIN TABLE" IS MADE WITH EFFICIENT AND ECOLOGICAL FIBER LASER TECHNOLOGY WITH PROVEN RELIABILITY AND FLEXIBILITY. ONLY THE FOCAL LENGTH CAN BE ADJUSTED FOR DIFFERENT MATERIAL THICKNESSES. HERE NO CONSTANT IS NECESSARY LENS REPLACEMENT WORK AREA 3.000 X 1.500 MM TRAVEL IN THE Z AXIS 180 MM TABLE LOAD 200 KG / M ² MAXIMUM NO-LOAD SPEED (MAX) M/MIN 169 MAXIMUM ACHSGESCHWINDIGKEITEN(X-U-Y)M/MIN 120 ACCELERATION IDLE G 1.5 FIBER LASER 2000 W OF FIBERCUT FOCAL LENGTH ADJUSTMENT FACILITIES: LASER SOURCE OF NLIGHT ALTA CONTROL ESA S 670 ESA CONTROL COOLING SYSTEM DRAWER SYSTEM CAD / CAM NESTING CE STANDARD
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-table size 3 000 x 2,000 mm
the z axis stroke 200 mm
working height 800 mm
table load max 500 kg / m â²

max working speed 12, 000 mm/min
max express gear speed 30 000 mm/min
repeatability +/-0.1 mm
positioning accuracy +/-0.06 mm / 300 mm

equipment of the machine

newly built 1-catcher with the abrasive cutting. catcher is absolutely new. features new: (because the system had cut only with pure water)
2-dosing system for solids 2 piece.
3-hp pipe lines
4-cutting heads with diamond nozzle 2 piece.
5-igems for 2d cutting
6-fill container a 1000 kg 2 pcs.
7-abrasive transport system (system for separate filling of both cutting heads

the plant will be sold without the high pressure pump. we can offer separately a high pressure pump but TABLE SIZE 3 000 X 2,000 MM THE Z AXIS STROKE 200 MM WORKING HEIGHT 800 MM TABLE LOAD MAX 500 KG / M ² MAX WORKING SPEED 12, 000 MM/MIN MAX EXPRESS GEAR SPEED 30 000 MM/MIN REPEATABILITY +/-0.1 MM POSITIONING ACCURACY +/-0.06 MM / 300 MM EQUIPMENT OF THE MACHINE NEWLY BUILT 1-CATCHER WITH THE ABRASIVE CUTTING. CATCHER IS ABSOLUTELY NEW. FEATURES NEW: (BECAUSE THE SYSTEM HAD CUT ONLY WITH PURE WATER) 2-DOSING SYSTEM FOR SOLIDS 2 PIECE. 3-HP PIPE LINES 4-CUTTING HEADS WITH DIAMOND NOZZLE 2 PIECE. 5-IGEMS FOR 2D CUTTING 6-FILL CONTAINER A 1000 KG 2 PCS. 7-ABRASIVE TRANSPORT SYSTEM (SYSTEM FOR SEPARATE FILLING OF BOTH CUTTING HEADS THE PLANT WILL BE SOLD WITHOUT THE HIGH PRESSURE PUMP. WE CAN OFFER SEPARATELY A HIGH PRESSURE PUMP BUT
Vendedor: Härtel Laser & Wasser
Año de construcción: usado
Ubicación: Land-maximum working speed 12 000 mm / min
max transversal speed 20 000mm / min
table 1.000 x 1.000 mm

z axis working length 200 mm
number of z supports 1
number of cutting heads 1

positioning accuracy +/-0,08 mm to 300 mm
repeatability +/-0.05 mm

dimensions length x width 2,140 x 2,320 x

dimensions height 2600 mm

weight 1.85 to

equipment of the machine

-motorized z axis
-table load 800 kg / m â²
-precision planetary gear with servo motors
-linear guides
-continuously controlled abrasive dosing
-suitable for pure water and abrasivschneiden
-cnc-controlled pressure setting
-machine size up to large format
-pool and guiding machine thermally and mechanically separated.

additional equipment:
-cutting system with cabin

-height sensor
-control p 886 in german / english
-cutting head series jet
-abrasive metering system
-reservoir abrasive volume 250 kg

-rinse-gun

-electric front door
-documentation in german / english
-complies with the ce - norm MAXIMUM WORKING SPEED 12 000 MM / MIN MAX TRANSVERSAL SPEED 20 000MM / MIN TABLE 1.000 X 1.000 MM Z AXIS WORKING LENGTH 200 MM NUMBER OF Z SUPPORTS 1 NUMBER OF CUTTING HEADS 1 POSITIONING ACCURACY +/-0,08 MM TO 300 MM REPEATABILITY +/-0.05 MM DIMENSIONS LENGTH X WIDTH 2,140 X 2,320 X DIMENSIONS HEIGHT 2600 MM WEIGHT 1.85 TO EQUIPMENT OF THE MACHINE -MOTORIZED Z AXIS -TABLE LOAD 800 KG / M ² -PRECISION PLANETARY GEAR WITH SERVO MOTORS -LINEAR GUIDES -CONTINUOUSLY CONTROLLED ABRASIVE DOSING -SUITABLE FOR PURE WATER AND ABRASIVSCHNEIDEN -CNC-CONTROLLED PRESSURE SETTING -MACHINE SIZE UP TO LARGE FORMAT -POOL AND GUIDING MACHINE THERMALLY AND MECHANICALLY SEPARATED. ADDITIONAL EQUIPMENT: -CUTTING SYSTEM WITH CABIN -HEIGHT SENSOR -CONTROL P 886 IN GERMAN / ENGLISH -CUTTING HEAD SERIES JET -ABRASIVE METERING SYSTEM -RESERVOIR ABRASIVE VOLUME 250 KG -RINSE-GUN -ELECTRIC FRONT DOOR -DOCUMENTATION IN GERMAN / ENGLISH -COMPLIES WITH THE CE - NORM
Vendedor: Härtel Laser & Wasser
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HäRTEL types: