101 ofertas

Año de construcción: usado
Ubicación: Land-technical data:
blade length: 250 mm
cutting capacity: 6.0 mm
cutting angle: 90 â°
stroke rate: 35 strokes/min
power: 4,0 kw

with fixed cutting angle, autom. adjustment of the cutting gap, 2 mech. holders, 2 positioning stops, rulers in the table and portable foot switch TECHNICAL DATA: BLADE LENGTH: 250 MM CUTTING CAPACITY: 6.0 MM CUTTING ANGLE: 90 ° STROKE RATE: 35 STROKES/MIN POWER: 4,0 KW WITH FIXED CUTTING ANGLE, AUTOM. ADJUSTMENT OF THE CUTTING GAP, 2 MECH. HOLDERS, 2 POSITIONING STOPS, RULERS IN THE TABLE AND PORTABLE FOOT SWITCH
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Precio: 17.300 €
Ubicación: Land-: 4.100 mm<br/>: 135 to<br/>: 3.600 mm<br/>: 750 mm<br/>: 11,3 kw<br/>: 120 mm<br/>: 250 mm<br/>: 325 mm<br/>: 4.270 mm<br/>: 1.500 mm<br/>: 2.470 mm<br/>: 9.100 kg<br/>electrohydraulic synchronization with linear scales and hydraulic control valve<br/>bending beam tilt adjustment by mechanical pre-selection counter<br/>press depth adjustment by mechanical pre-selection counter and digital read-out<br/>motorized back gauge with man. fine adjustment by handwheel and mechanical read-out<br/>sheet support arms on the front<br/>new goose neck upper tool throughout<br/>multiv lower tool 90x90x4100mm v55/30/25/18/10 mm<br/>users manual in german<br/><br/>does not comply with the current industrial safety regualtions (amvo &, uvv)<br/><br/><br/><br/><br/>bending length: 4.100 mm <br/>bending force: 135 to<br/>distance between columns: 3.600 mm<br/>back gauge area: 750 mm<br/>motor: 11,3 kw<br/>stroke: 120 mm<br/>throath depth: 250 mm<br/>daylight: 325 mm<br/>length: 4.270 mm<br/>width: 1.500 mm<br/>heigth: 2.470 mm<br/>weight: 9.100 kg<br/><br/><br/><br/> : 4.100 MM
: 135 TO
: 3.600 MM
: 750 MM
: 11,3 KW
: 120 MM
: 250 MM
: 325 MM
: 4.270 MM
: 1.500 MM
: 2.470 MM
: 9.100 KG
ELECTROHYDRAULIC SYNCHRONIZATION WITH LINEAR SCALES AND HYDRAULIC CONTROL VALVE
BENDING BEAM TILT ADJUSTMENT BY MECHANICAL PRE-SELECTION COUNTER
PRESS DEPTH ADJUSTMENT BY MECHANICAL PRE-SELECTION COUNTER AND DIGITAL READ-OUT
MOTORIZED BACK GAUGE WITH MAN. FINE ADJUSTMENT BY HANDWHEEL AND MECHANICAL READ-OUT
SHEET SUPPORT ARMS ON THE FRONT
NEW GOOSE NECK UPPER TOOL THROUGHOUT
MULTIV LOWER TOOL 90X90X4100MM V55/30/25/18/10 MM
USERS MANUAL IN GERMAN

DOES NOT COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGUALTIONS (AMVO &, UVV)




BENDING LENGTH: 4.100 MM
BENDING FORCE: 135 TO
DISTANCE BETWEEN COLUMNS: 3.600 MM
BACK GAUGE AREA: 750 MM
MOTOR: 11,3 KW
STROKE: 120 MM
THROATH DEPTH: 250 MM
DAYLIGHT: 325 MM
LENGTH: 4.270 MM
WIDTH: 1.500 MM
HEIGTH: 2.470 MM
WEIGHT: 9.100 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 13.0 mm
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 9 17 strokes
working height: 930 mm

with sc 100t control, motorized back gauge,.
angle stop 1000 mm scale and t-nut and hydraulic high restraint
(internal: lay 000257) (article-no. sp246)
 TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 13.0 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 9 17 STROKES WORKING HEIGHT: 930 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. ANGLE STOP 1000 MM SCALE AND T-NUT AND HYDRAULIC HIGH RESTRAINT (INTERNAL: LAY 000257) (ARTICLE-NO. SP246)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Precio: 17.800 €
Ubicación: Land-: 6 mm<br/>: 3.050 mm<br/>: 750 mm<br/>: 1.000 mm<br/>: 7,5 kw<br/>: 3.640 mm<br/>: 1.750 mm<br/>: 1.650 mm<br/>: 4.500 kg<br/>linear guided<br/>new electric cabinet and pre selection control sp 9 retrofit (installation in progress) orig. haco for automatic cutting angle adjustment according to inserted sheet thickness<br/>man. cutting gap adjustment on the front (handwheel) with digital readout<br/>light barrier on the rear side<br/>cutting length limitation<br/>aut. pre selection of back gauge measure, 1 position with digital readout<br/>aut. validation of back gauge<br/>mot. adjustment of back gauge by 2 push buttons<br/>cutting line illumination<br/>sheet support arms<br/>balls in table<br/>users manual in german<br/><br/>complies with the present industrial safety regulations (amvo &, uvv)<br/><br/>cutting capacity: 6 mm<br/>cutting length: 3.050 mm<br/>strokes: 9/17 1/min.<br/>cutting angle: 0,5 - 3°<br/>back gauge: 750 mm<br/>side lay: 1.000 mm<br/>motor: 7,5 kw<br/>length: 3.640 mm <br/>width: 1.750 mm <br/>heigth: 1.650 mm <br/>weight: 4.500 kg<br/><br/><br/><br/> : 6 MM
: 3.050 MM
: 750 MM
: 1.000 MM
: 7,5 KW
: 3.640 MM
: 1.750 MM
: 1.650 MM
: 4.500 KG
LINEAR GUIDED
NEW ELECTRIC CABINET AND PRE SELECTION CONTROL SP 9 RETROFIT (INSTALLATION IN PROGRESS) ORIG. HACO FOR AUTOMATIC CUTTING ANGLE ADJUSTMENT ACCORDING TO INSERTED SHEET THICKNESS
MAN. CUTTING GAP ADJUSTMENT ON THE FRONT (HANDWHEEL) WITH DIGITAL READOUT
LIGHT BARRIER ON THE REAR SIDE
CUTTING LENGTH LIMITATION
AUT. PRE SELECTION OF BACK GAUGE MEASURE, 1 POSITION WITH DIGITAL READOUT
AUT. VALIDATION OF BACK GAUGE
MOT. ADJUSTMENT OF BACK GAUGE BY 2 PUSH BUTTONS
CUTTING LINE ILLUMINATION
SHEET SUPPORT ARMS
BALLS IN TABLE
USERS MANUAL IN GERMAN

COMPLIES WITH THE PRESENT INDUSTRIAL SAFETY REGULATIONS (AMVO &, UVV)

CUTTING CAPACITY: 6 MM
CUTTING LENGTH: 3.050 MM
STROKES: 9/17 1/MIN.
CUTTING ANGLE: 0,5 - 3°
BACK GAUGE: 750 MM
SIDE LAY: 1.000 MM
MOTOR: 7,5 KW
LENGTH: 3.640 MM
WIDTH: 1.750 MM
HEIGTH: 1.650 MM
WEIGHT: 4.500 KG



Vendedor: HESSE+CO GesmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 13.0 mm
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 9 17 strokes
working height: 930 mm

with sc 100t control, motorized back gauge,.
cutting line illumination and angular stop 1000 mm
with 3 balls, scale and t-slot
(internal: lay 000230)
 TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 13.0 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 9 17 STROKES WORKING HEIGHT: 930 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. CUTTING LINE ILLUMINATION AND ANGULAR STOP 1000 MM WITH 3 BALLS, SCALE AND T-SLOT (INTERNAL: LAY 000230)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-operating-manual for guillotine haco ts 3006/3010/3012<br>(23 pages) OPERATING-MANUAL FOR GUILLOTINE HACO TS 3006/3010/3012
(23 PAGES)
Vendedor: Peter Jüttermann Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 10,0 mm
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 10-18 strokes
working height: 930 mm

with sc 100t control, motorized back gauge,.
cutting line illumination. angle stop 1000 mm
mit3 balls, scale and t-nut and hydraulic
high restraint
(internal: lay 000228) TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 10,0 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 10-18 STROKES WORKING HEIGHT: 930 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. CUTTING LINE ILLUMINATION. ANGLE STOP 1000 MM MIT3 BALLS, SCALE AND T-NUT AND HYDRAULIC HIGH RESTRAINT (INTERNAL: LAY 000228)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Precio: used machinery auction RESALE 3.900 €
Ubicación: Land-weight approx.: 2000 kg<br/>dimensions (l x w x h) approx.: 1600 x 1000 x 1700 mm<br/>description: - cnc robosoft<br> - axis: y1/y2/x/r1/r2<br> - comes with full set of brand new amada tools WEIGHT APPROX.: 2000 KG
DIMENSIONS (L X W X H) APPROX.: 1600 X 1000 X 1700 MM
DESCRIPTION: - CNC ROBOSOFT
- AXIS: Y1/Y2/X/R1/R2
- COMES WITH FULL SET OF BRAND NEW AMADA TOOLS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 6.5 mm
cutting angle: 0.5-3.0 â°
trailing stop: 750 mm
stroke rate: 11-22 strokes
working height: 770 mm

with sc 100t control, motorized back gauge,.
angle stop 1000 mm, scale and t-nut and hydraulic high restraint
(art. no. sp244) (internal: lay 000256)
 TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 6.5 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; TRAILING STOP: 750 MM STROKE RATE: 11-22 STROKES WORKING HEIGHT: 770 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. ANGLE STOP 1000 MM, SCALE AND T-NUT AND HYDRAULIC HIGH RESTRAINT (ART. NO. SP244) (INTERNAL: LAY 000256)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure: 135 t<br/>chamfer lenght: 3100 mm<br/>distance between columns:  mm<br/>control:  <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/>- electric backgauge<br/>- 1 set of tools<br/><br/><br/><br/><br/> PRESSURE: 135 T
CHAMFER LENGHT: 3100 MM
DISTANCE BETWEEN COLUMNS: MM
CONTROL:
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M
- ELECTRIC BACKGAUGE
- 1 SET OF TOOLS




Vendedor: Frech GmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 6.5 mm
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 11-22 strokes
working height: 770 mm

with sc 100t control, motorized back gauge,.
angle stop 1000 mm, scale, and t-nut (ref. sp245)(intern: lag-000255) TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 6.5 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 11-22 STROKES WORKING HEIGHT: 770 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. ANGLE STOP 1000 MM, SCALE, AND T-NUT (REF. SP245)(INTERN: LAG-000255)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-sheet width: 3050 mm<br/>plate thickness: 6 mm<br/>distance between columns: 3100 mm<br/>control: sc 7 <br/>total power requirement:  kw<br/>weight of the machine ca.: 5,8 t<br/>accessories: programmable back gauge with dro, angle front stop,<br/>             table extensions<br/><br/><br/><br/><br/> SHEET WIDTH: 3050 MM
PLATE THICKNESS: 6 MM
DISTANCE BETWEEN COLUMNS: 3100 MM
CONTROL: SC 7
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: 5,8 T
ACCESSORIES: PROGRAMMABLE BACK GAUGE WITH DRO, ANGLE FRONT STOP,
TABLE EXTENSIONS




Vendedor: Hans Klein Werkzeugmaschinen-Handel GmbH
Año de construcción: usado
Ubicación: Land-technical data:
cutting length: 3050 mm
sheet thickness: 6,0 mm
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 10-15 strokes
working height: 770 mm

with sp 9 control, motorized back gauge,.
cutting line illumination and angular stop 1000 mm
mit3 balls, scale and t-slot
(internal: lay 000227)
 TECHNICAL DATA: CUTTING LENGTH: 3050 MM SHEET THICKNESS: 6,0 MM CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 10-15 STROKES WORKING HEIGHT: 770 MM WITH SP 9 CONTROL, MOTORIZED BACK GAUGE,. CUTTING LINE ILLUMINATION AND ANGULAR STOP 1000 MM MIT3 BALLS, SCALE AND T-SLOT (INTERNAL: LAY 000227)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure: 75 t<br/>chamfer lenght: 3100 mm<br/>distance between columns: 2600 mm<br/>throat: 200 mm<br/>dayligth: 280 mm<br/>table height: 915 mm<br/>working feed: 7 mm/sec<br/>return speed: 60 mm/sec<br/>stroke: 100 mm<br/>total power requirement: 7,5 kw<br/>weight of the machine ca.: 5,1 t<br/>dimensions of the machine ca.: 3,2 x 1,8 x 2,2 m<br/><br/><br/><br/><br/> PRESSURE: 75 T
CHAMFER LENGHT: 3100 MM
DISTANCE BETWEEN COLUMNS: 2600 MM
THROAT: 200 MM
DAYLIGTH: 280 MM
TABLE HEIGHT: 915 MM
WORKING FEED: 7 MM/SEC
RETURN SPEED: 60 MM/SEC
STROKE: 100 MM
TOTAL POWER REQUIREMENT: 7,5 KW
WEIGHT OF THE MACHINE CA.: 5,1 T
DIMENSIONS OF THE MACHINE CA.: 3,2 X 1,8 X 2,2 M




Vendedor: A+B Werkzeug Maschinen Handels GmbH
Año de construcción: usado
Ubicación: Land-technical data:
sheet width: 2050 mm
sheet thickness: 6.5
cutting angle: 0.5-3.0 â°
back gauge: 1000 mm
stroke rate: 13-24 strokes
working height: 770 mm

with sc 100t control, motorized back gauge,.
cutting line illumination. angle stop 1000 mm
and plastic inserts in the clamps
(internal: lay 000278)
 TECHNICAL DATA: SHEET WIDTH: 2050 MM SHEET THICKNESS: 6.5 CUTTING ANGLE: 0.5-3.0 &ACIRC;&DEG; BACK GAUGE: 1000 MM STROKE RATE: 13-24 STROKES WORKING HEIGHT: 770 MM WITH SC 100T CONTROL, MOTORIZED BACK GAUGE,. CUTTING LINE ILLUMINATION. ANGLE STOP 1000 MM AND PLASTIC INSERTS IN THE CLAMPS (INTERNAL: LAY 000278)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure:220 t<br/>chamfer lenght:3100 mm<br/>distance between columns:2600 mm<br/>throat:300 mm<br/>stroke:200 mm<br/>table height:965 mm<br/>ajustment speed:80 mm/sec<br/>return speed:100 mm/sec<br/>total power requirement:18,7 kw<br/>weight of the machine ca.:11,6 t<br/>dimensions of the machine ca.:3,3 x 2,0 x 2,8 m<br/>control:cnc haco bc 59 t <br/>emboss system: <br/><br/> PRESSURE:220 T
CHAMFER LENGHT:3100 MM
DISTANCE BETWEEN COLUMNS:2600 MM
THROAT:300 MM
STROKE:200 MM
TABLE HEIGHT:965 MM
AJUSTMENT SPEED:80 MM/SEC
RETURN SPEED:100 MM/SEC
TOTAL POWER REQUIREMENT:18,7 KW
WEIGHT OF THE MACHINE CA.:11,6 T
DIMENSIONS OF THE MACHINE CA.:3,3 X 2,0 X 2,8 M
CONTROL:CNC HACO BC 59 T
EMBOSS SYSTEM:

Vendedor: Heinz Sanders GmbH
Año de construcción: usado
Ubicación: Land-technical data:

pressure capacity: 250 t
bending length: 3100 mm
stand width: 2600 mm
stand projection: 400 mm
max stroke length: 270 mm
height: 520 mm
travel - x-axis: 800 mm
travel - r axis: 250 mm

with fastbend 2d mt premium cnc control, complete
set of 2 auflegearme for linear guides, tools, cnc table crowning and laser security system
(option: hacobend-2d offline software)
(internal: lag_000231)   TECHNICAL DATA: PRESSURE CAPACITY: 250 T BENDING LENGTH: 3100 MM STAND WIDTH: 2600 MM STAND PROJECTION: 400 MM MAX STROKE LENGTH: 270 MM HEIGHT: 520 MM TRAVEL - X-AXIS: 800 MM TRAVEL - R AXIS: 250 MM WITH FASTBEND 2D MT PREMIUM CNC CONTROL, COMPLETE SET OF 2 AUFLEGEARME FOR LINEAR GUIDES, TOOLS, CNC TABLE CROWNING AND LASER SECURITY SYSTEM (OPTION: HACOBEND-2D OFFLINE SOFTWARE) (INTERNAL: LAG_000231)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-sheet width: 6000 mm<br/>plate thickness: 4 mm<br/>cutting angle: 0,5-3 °<br/>cutting gap adjustment: 0,05-0,5 mm<br/>control: sc 7-p <br/>weight of the machine ca.: 24000 kg<br/>dimensions of the machine ca.: 7000x2200x2500 mm<br/><br/><br/><br/><br/> SHEET WIDTH: 6000 MM
PLATE THICKNESS: 4 MM
CUTTING ANGLE: 0,5-3 °
CUTTING GAP ADJUSTMENT: 0,05-0,5 MM
CONTROL: SC 7-P
WEIGHT OF THE MACHINE CA.: 24000 KG
DIMENSIONS OF THE MACHINE CA.: 7000X2200X2500 MM




Vendedor: Bästlein Gebrauchtmaschinenhandel GmbH
Año de construcción: usado
Ubicación: Land-technical data:

pressure capacity: 200 t
bending length: 3100 mm
stand width: 2600 mm
stand projection: 400 mm
max stroke length: 270 mm
height: 520 mm
ver travel - x-axis: 800 mm

with fastbend 2d mt premium cnc control, complete
set of 2 auflegearme for linear guides, tools, cnc table crowning and laser security system
(option: hacobend-2d offline software)
(internal: lag_000231) TECHNICAL DATA: PRESSURE CAPACITY: 200 T BENDING LENGTH: 3100 MM STAND WIDTH: 2600 MM STAND PROJECTION: 400 MM MAX STROKE LENGTH: 270 MM HEIGHT: 520 MM VER TRAVEL - X-AXIS: 800 MM WITH FASTBEND 2D MT PREMIUM CNC CONTROL, COMPLETE SET OF 2 AUFLEGEARME FOR LINEAR GUIDES, TOOLS, CNC TABLE CROWNING AND LASER SECURITY SYSTEM (OPTION: HACOBEND-2D OFFLINE SOFTWARE) (INTERNAL: LAG_000231)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-pressure: 150 t<br/>chamfer lenght: 3000 mm<br/>distance between columns: - mm<br/>control: fastbend-2d multitouch <br/>total power requirement:  kw<br/>weight of the machine ca.:  t<br/>dimensions of the machine ca.:  m<br/><br/><br/><br/><br/> PRESSURE: 150 T
CHAMFER LENGHT: 3000 MM
DISTANCE BETWEEN COLUMNS: - MM
CONTROL: FASTBEND-2D MULTITOUCH
TOTAL POWER REQUIREMENT: KW
WEIGHT OF THE MACHINE CA.: T
DIMENSIONS OF THE MACHINE CA.: M




Vendedor: Knops Werkzeugmaschinen
Año de construcción: usado
Ubicación: Land-technical data:

pressure capacity: 200 t
bending length: 3100 mm
stand width: 2600 mm
stand projection: 400 mm
max stroke length: 270 mm
height: 520 mm
ver travel - x-axis: 800 mm

complete with premium graphic control, easybend-2d
set tools, fiessler photoelectric system, 2 auflegearme for linear guides and cnc crowning
(option: hacobend-2d offline software)
(internal: lag_000232)
 TECHNICAL DATA: PRESSURE CAPACITY: 200 T BENDING LENGTH: 3100 MM STAND WIDTH: 2600 MM STAND PROJECTION: 400 MM MAX STROKE LENGTH: 270 MM HEIGHT: 520 MM VER TRAVEL - X-AXIS: 800 MM COMPLETE WITH PREMIUM GRAPHIC CONTROL, EASYBEND-2D SET TOOLS, FIESSLER PHOTOELECTRIC SYSTEM, 2 AUFLEGEARME FOR LINEAR GUIDES AND CNC CROWNING (OPTION: HACOBEND-2D OFFLINE SOFTWARE) (INTERNAL: LAG_000232)
Vendedor: VOLZ Maschinenhandel GmbH & Co. KG
Año de construcción: usado
Ubicación: Land-<br>capacity: 135 t<br>folding length: 3100 mm<br>cnc brand: atl<br>cnc model: 2000 <br><p>make haco erm 135 t</p>
<p>type euromaster - erm</p>
<p>year 1992 atl 2000</p>
<p>capacity (metric tons) 135 ton</p>
<p>folding length (mm) 3.100 mm</p>
<p>down stroke or up stroke synchro</p>
<p>tandem type y¹+y²+x+ v1 set universal tooling</p>
<p>
CAPACITY: 135 T
FOLDING LENGTH: 3100 MM
CNC BRAND: ATL
CNC MODEL: 2000

MAKE HACO ERM 135 T

TYPE EUROMASTER - ERM

YEAR 1992 ATL 2000

CAPACITY (METRIC TONS) 135 TON

FOLDING LENGTH (MM) 3.100 MM

DOWN STROKE OR UP STROKE SYNCHRO

TANDEM TYPE Y¹+Y²+X+ V1 SET UNIVERSAL TOOLING

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-
technical data:

-pressure capacity 150 t
	-working width 4100 mm
	-clearance between the stands 3150 mm
	-table width 200 mm
	-radius 300 mm
	-height 450 mm
	-delivery speed 80 mm / sec.
	-work speed 9 mm / sec.
	-retraction speed 80 mm / sec.
	-stroke 200 mm
	-drive 400 v / 15 kw
	-space requirement approx.              b h 4500 x 2650 x h 1900 mm
	-weight approx.				           10000 kg
	-with: - swivel arm - control panel for crimping depth + backgauge - mot. backgauge - one. crowning creation
-split 4-way universal die - split foot tool
-two hand control console, footswitch, 
 TECHNICAL DATA: -PRESSURE CAPACITY 150 T -WORKING WIDTH 4100 MM -CLEARANCE BETWEEN THE STANDS 3150 MM -TABLE WIDTH 200 MM -RADIUS 300 MM -HEIGHT 450 MM -DELIVERY SPEED 80 MM / SEC. -WORK SPEED 9 MM / SEC. -RETRACTION SPEED 80 MM / SEC. -STROKE 200 MM -DRIVE 400 V / 15 KW -SPACE REQUIREMENT APPROX. B H 4500 X 2650 X H 1900 MM -WEIGHT APPROX. 10000 KG -WITH: - SWIVEL ARM - CONTROL PANEL FOR CRIMPING DEPTH + BACKGAUGE - MOT. BACKGAUGE - ONE. CROWNING CREATION -SPLIT 4-WAY UNIVERSAL DIE - SPLIT FOOT TOOL -TWO HAND CONTROL CONSOLE, FOOTSWITCH,
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-<br>sheet thickness: 6,00 mm<br>sheet width: 3050 mm<br>depth rear gauge: 750 mm <br><p>make haco 3000 x 6</p>
<p>type ts 306</p>
<p>year 2000</p>
<p>haco schaar plaatschaar hydraulic guillotine</p>
<p>sheet thickness (mm) t = 6 mm</p>
<p>sheet width (mm) l = 3.050 mm</p>
<p>depth rear gauge (mm) d = 750 mm</p>
<p>
SHEET THICKNESS: 6,00 MM
SHEET WIDTH: 3050 MM
DEPTH REAR GAUGE: 750 MM

MAKE HACO 3000 X 6

TYPE TS 306

YEAR 2000

HACO SCHAAR PLAATSCHAAR HYDRAULIC GUILLOTINE

SHEET THICKNESS (MM) T = 6 MM

SHEET WIDTH (MM) L = 3.050 MM

DEPTH REAR GAUGE (MM) D = 750 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-in good technical condition.
3 m / 100 tons
easybend-2d - control system
length of the material: 3000 mm
the machine is equipped with upper tool - 1281 promecam and 4v promecam lower.
the machine is intended for bending of normal steel, stainless steel, aluminum or copper.
machine weight: 9.000 kg IN GOOD TECHNICAL CONDITION. 3 M / 100 TONS EASYBEND-2D - CONTROL SYSTEM LENGTH OF THE MATERIAL: 3000 MM THE MACHINE IS EQUIPPED WITH UPPER TOOL - 1281 PROMECAM AND 4V PROMECAM LOWER. THE MACHINE IS INTENDED FOR BENDING OF NORMAL STEEL, STAINLESS STEEL, ALUMINUM OR COPPER. MACHINE WEIGHT: 9.000 KG
Vendedor: KAXIMA International, s.r.o.
Año de construcción: usado
Ubicación: Land-<br>sheet thickness: 4,00 mm<br>sheet width: 1500 mm<br>depth rear gauge: 0 mm <br><p>make haco 4 mm</p>
<p>type sst 1504</p>
<p>year 2002</p>
<p>sp8 robosoft haco schaar</p>
<p>sheet thickness (mm)t = 4 mm</p>
<p>sheet width (mm) l = 1.500 mmdepth rear gauge (mm)swing beam</p>
<p>back stop 750 mm</p>
<p>
SHEET THICKNESS: 4,00 MM
SHEET WIDTH: 1500 MM
DEPTH REAR GAUGE: 0 MM

MAKE HACO 4 MM

TYPE SST 1504

YEAR 2002

SP8 ROBOSOFT HACO SCHAAR

SHEET THICKNESS (MM)T = 4 MM

SHEET WIDTH (MM) L = 1.500 MMDEPTH REAR GAUGE (MM)SWING BEAM

BACK STOP 750 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-nominal forming force: 135ttabellã¤nge: 3100 mm
the machine is in good technical condition, by prior agreement the possibility of testing. å?s: easy bend 2d distance without sidewalks: 2600mm max operating pressure: 300 bar working speed: 10 mm / s stroke: 200 mm capacity: 250 mm motor power: 15 kw sound: 72 db (a) weight: 7800 kg after agreement NOMINAL FORMING FORCE: 135TTABELL&ATILDE;&CURREN;NGE: 3100 MM THE MACHINE IS IN GOOD TECHNICAL CONDITION, BY PRIOR AGREEMENT THE POSSIBILITY OF TESTING. &ARING;?S: EASY BEND 2D DISTANCE WITHOUT SIDEWALKS: 2600MM MAX OPERATING PRESSURE: 300 BAR WORKING SPEED: 10 MM / S STROKE: 200 MM CAPACITY: 250 MM MOTOR POWER: 15 KW SOUND: 72 DB (A) WEIGHT: 7800 KG AFTER AGREEMENT
Vendedor: CEE-Machines
Año de construcción: usado
Ubicación: Land-<br>capacity: 135 t<br>folding length: 3100 mm<br>cnc brand: robosoft<br>cnc model: atl 2000 <br><p>make haco 135 ton</p>
<p>type erm 30135 (euromaster)</p>
<p>year 1992</p>
<p>robosoft atl 2000 - cnc abkantpresse haco</p>
<p>capacity (metric tons) 135 ton</p>
<p>folding length (mm)3.100 mm</p>
<p>down stroke or up stroke cnc crowning</p>
<p>tandem type y1 / y2 / x / v axis</p>
<p>1 set tooling</p>
<p>
CAPACITY: 135 T
FOLDING LENGTH: 3100 MM
CNC BRAND: ROBOSOFT
CNC MODEL: ATL 2000

MAKE HACO 135 TON

TYPE ERM 30135 (EUROMASTER)

YEAR 1992

ROBOSOFT ATL 2000 - CNC ABKANTPRESSE HACO

CAPACITY (METRIC TONS) 135 TON

FOLDING LENGTH (MM)3.100 MM

DOWN STROKE OR UP STROKE CNC CROWNING

TANDEM TYPE Y1 / Y2 / X / V AXIS

1 SET TOOLING

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-* chocolate production mini tablets and napolitan * CHOCOLATE PRODUCTION MINI TABLETS AND NAPOLITAN
Vendedor: MAT DE SURONE
Año de construcción: usado
Ubicación: Land-<br>sheet thickness: 13,00 mm<br>void: 0<br>table length: 3100 mm<br>table width: 1000 mm<br>knife length: 0 mm <br><p>make haco 13 mm</p>
<p>type hslx 3013</p>
<p>year 2005</p>
<p>haco hslx 3013 with nc system sc 70</p>
<p>sheet thickness (mm)t = 13 mm</p>
<p>sheet width (mm) l = 3.100</p>
<p>depth rear gauge (mm)d = 1.000</p>
<p>nc system sc 70</p>
<p>power 400 v / 22 kw</p>
<p>new euro 45.000</p>
<p>
SHEET THICKNESS: 13,00 MM
VOID: 0
TABLE LENGTH: 3100 MM
TABLE WIDTH: 1000 MM
KNIFE LENGTH: 0 MM

MAKE HACO 13 MM

TYPE HSLX 3013

YEAR 2005

HACO HSLX 3013 WITH NC SYSTEM SC 70

SHEET THICKNESS (MM)T = 13 MM

SHEET WIDTH (MM) L = 3.100

DEPTH REAR GAUGE (MM)D = 1.000

NC SYSTEM SC 70

POWER 400 V / 22 KW

NEW EURO 45.000

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-used chocolate enrobing line kreuter

including: 
- hacos amandelrangeer nut feeder, year 2003
- kreuter 480mms wide chocolate enrober, year 1993, number 8109, top & bottom coating, stainless steel.  
- kreuter cooling tunnel, 7500mms long cooling, cold air.  
- hacos bochtband 180degree conveyor turn, year 2012
- savy goiseau cooling tunnel, model tunnel 480, 480mms wide, stainless steel, year 1994, 2metres infeed then 8 metres long cooling, 1.500 mms long outfeed.  

all in good order, all currently still set up on the factory floor, but no longer running.  currently located in belgium, (arriving in stock in uk shortly).  pictures available, inspections welcome.

we could sell the hacos feeder and savy goiseau cooling tunnel separately. USED CHOCOLATE ENROBING LINE KREUTER INCLUDING: - HACOS AMANDELRANGEER NUT FEEDER, YEAR 2003 - KREUTER 480MMS WIDE CHOCOLATE ENROBER, YEAR 1993, NUMBER 8109, TOP & BOTTOM COATING, STAINLESS STEEL. - KREUTER COOLING TUNNEL, 7500MMS LONG COOLING, COLD AIR. - HACOS BOCHTBAND 180DEGREE CONVEYOR TURN, YEAR 2012 - SAVY GOISEAU COOLING TUNNEL, MODEL TUNNEL 480, 480MMS WIDE, STAINLESS STEEL, YEAR 1994, 2METRES INFEED THEN 8 METRES LONG COOLING, 1.500 MMS LONG OUTFEED. ALL IN GOOD ORDER, ALL CURRENTLY STILL SET UP ON THE FACTORY FLOOR, BUT NO LONGER RUNNING. CURRENTLY LOCATED IN BELGIUM, (ARRIVING IN STOCK IN UK SHORTLY). PICTURES AVAILABLE, INSPECTIONS WELCOME. WE COULD SELL THE HACOS FEEDER AND SAVY GOISEAU COOLING TUNNEL SEPARATELY.
Vendedor: In.Ha.TEC Vertrieb & Service UG
Año de construcción: usado
Ubicación: Land-<br>capacity: 150 t<br>folding length: 3600 mm<br>cnc brand: robosoft <br><p>specificaties</p>
<p>besturing   robosoft</p>
<p>soort kantbank / zetbank / mech. / hydr</p>
<p>.pressbrakewerking hydraulisch / servo / mechanisch  hydraulic</p>
<p>max. buig lengte   3600 mm</p>
<p>buig lengte tussen kolommen  3150 mm</p>
<p>max. tonnage t / of dikte in mm   150 ton</p>
<p>uitlading   250 mm</p>
<p>slag lengte  120 mm</p>
<p>inbouwhoogte  325 mm</p>
<p>bereik achter aanlsag  x in mm 750 mm</p>
<p>aantal gestuurde assen  2/3vermogen kw  11.4 kw</p>
<p>
CAPACITY: 150 T
FOLDING LENGTH: 3600 MM
CNC BRAND: ROBOSOFT

SPECIFICATIES

BESTURING &NBSP; ROBOSOFT

SOORT KANTBANK / ZETBANK / MECH. / HYDR

.PRESSBRAKEWERKING HYDRAULISCH / SERVO / MECHANISCH &NBSP;HYDRAULIC

MAX. BUIG LENGTE &NBSP; 3600 MM

BUIG LENGTE TUSSEN KOLOMMEN &NBSP;3150 MM

MAX. TONNAGE T / OF DIKTE IN MM &NBSP; 150 TON

UITLADING &NBSP; 250 MM

SLAG LENGTE &NBSP;120 MM

INBOUWHOOGTE &NBSP;325 MM

BEREIK ACHTER AANLSAG &NBSP;X IN MM 750 MM

AANTAL GESTUURDE ASSEN &NBSP;2/3VERMOGEN KW &NBSP;11.4 KW

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-cnc press brake haco

bending length: 3.600 mm
capacity: 100 ton
 	 
cnc control: atl 550
controlled axes: x, y1, y2 rear stop: 600 mm
stroke length: 120 mm
 	 
throat depth: 250 mm
stand size: 3,150 mm
 	 
equipped with:
	-crowning
 	-rear protection
 	-hand + foot pedal
 	-operating instructions
 	 
country of origin: netherlands
engine power: 5,5 kw
machine weight: 7,000 kg CNC PRESS BRAKE HACO BENDING LENGTH: 3.600 MM CAPACITY: 100 TON CNC CONTROL: ATL 550 CONTROLLED AXES: X, Y1, Y2 REAR STOP: 600 MM STROKE LENGTH: 120 MM THROAT DEPTH: 250 MM STAND SIZE: 3,150 MM EQUIPPED WITH: -CROWNING -REAR PROTECTION -HAND + FOOT PEDAL -OPERATING INSTRUCTIONS COUNTRY OF ORIGIN: NETHERLANDS ENGINE POWER: 5,5 KW MACHINE WEIGHT: 7,000 KG
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-<br>sheet thickness: 13,00 mm<br>void: 3050<br>table length: 0 mm<br>table width: 0 mm<br>knife length: 0 mm <br><p>specifications</p>
<p>controll   sc 70 robosoft</p>
<p>guillotine / lazer / cutting table   hydraulic guillotine</p>
<p>cutting lenght    3050 mm</p>
<p>maximum sheet thickness  13 mm</p>
<p>backgauge stroke x in mm   0 - 1000 mm</p>
<p>dimensions</p>
<p>length  4300 mm</p>
<p>width   2200 mm</p>
<p>height  2500 mm</p>
<p>
SHEET THICKNESS: 13,00 MM
VOID: 3050
TABLE LENGTH: 0 MM
TABLE WIDTH: 0 MM
KNIFE LENGTH: 0 MM

SPECIFICATIONS

CONTROLL &NBSP; SC 70 ROBOSOFT

GUILLOTINE / LAZER / CUTTING TABLE &NBSP; HYDRAULIC GUILLOTINE

CUTTING LENGHT &NBSP; &NBSP;3050 MM

MAXIMUM SHEET THICKNESS &NBSP;13 MM

BACKGAUGE STROKE X IN MM &NBSP; 0 - 1000 MM

DIMENSIONS

LENGTH &NBSP;4300 MM

WIDTH &NBSP; 2200 MM

HEIGHT &NBSP;2500 MM

Vendedor: Mach4metal
Año de construcción: usado
Ubicación: Land-cnc press brake haco

bending length: 1,600 mm
capacity: 60 ton
 	 
cnc control: bc40 graphics
controlled axes: x, y1, y2 + camber
 	 
trailing stop: 750 mm
length of stroke: 100 mm
 	 
throat depth: 200 mm
stand width: 1100 mm
 	 
equipped with:
	-rear protection
 	-hand + foot pedal
 	-operating instructions
 	 
country of origin: netherlands
engine performance: 5.6 kw
machine weight: 4,000 kg CNC PRESS BRAKE HACO BENDING LENGTH: 1,600 MM CAPACITY: 60 TON CNC CONTROL: BC40 GRAPHICS CONTROLLED AXES: X, Y1, Y2 + CAMBER TRAILING STOP: 750 MM LENGTH OF STROKE: 100 MM THROAT DEPTH: 200 MM STAND WIDTH: 1100 MM EQUIPPED WITH: -REAR PROTECTION -HAND + FOOT PEDAL -OPERATING INSTRUCTIONS COUNTRY OF ORIGIN: NETHERLANDS ENGINE PERFORMANCE: 5.6 KW MACHINE WEIGHT: 4,000 KG
Vendedor: Valk Machines B.V.
Año de construcción: usado
Ubicación: Land-with 9 t-slots 60x27+36x49 distance between slots: 215 mm WITH 9 T-SLOTS 60X27+36X49 DISTANCE BETWEEN SLOTS: 215 MM
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-overview:
brand: haco
model: ats 3206
application type: shearing
machine type: shearing machine
availability: immediately
construction year: 2014
production hours: 150
location: netherlands
origin country: belgium

general data:
measurements width: 3300 mm
measurements depth: 1550 mm
measurements height: 1700 mm
machine weight: 14300 kg

main drive:
shearing force: 3000 kn

control unit:
brand: atlantic 
model: e10-s

workpiece:
workpiece x: 3200 mm
workpiece y: 4 mm

max material thickness:
steel: 16 mm
stainless steel: 16 mm
aluminium: 20 mm

media:
main electronic connection: 380 v
power consumption: 18 kva OVERVIEW: BRAND: HACO MODEL: ATS 3206 APPLICATION TYPE: SHEARING MACHINE TYPE: SHEARING MACHINE AVAILABILITY: IMMEDIATELY CONSTRUCTION YEAR: 2014 PRODUCTION HOURS: 150 LOCATION: NETHERLANDS ORIGIN COUNTRY: BELGIUM GENERAL DATA: MEASUREMENTS WIDTH: 3300 MM MEASUREMENTS DEPTH: 1550 MM MEASUREMENTS HEIGHT: 1700 MM MACHINE WEIGHT: 14300 KG MAIN DRIVE: SHEARING FORCE: 3000 KN CONTROL UNIT: BRAND: ATLANTIC MODEL: E10-S WORKPIECE: WORKPIECE X: 3200 MM WORKPIECE Y: 4 MM MAX MATERIAL THICKNESS: STEEL: 16 MM STAINLESS STEEL: 16 MM ALUMINIUM: 20 MM MEDIA: MAIN ELECTRONIC CONNECTION: 380 V POWER CONSUMPTION: 18 KVA
Vendedor: GINDUMAC GmbH
Año de construcción: usado
Ubicación: Land-sold in one lot with extrusion line z10a 4251 (johnson-spaten)extrusionlines with co-extrusion for production of abs, epdm & pe plates---co-extrusion of plates with different top & bottom layer----max extrusion width: 1650 mm, thickness: 15 mm----total production in 1 year (2 lines) = 1.700.000kgs----davis-standard:1)  main extruder typ 45 in 45 ht     motor: 187.5 kw @ 380v     cap: 15000w-----2)  2 x co-extruders 15-in-20     cap:     motor:-----3)  extrusion head width 2000 mm-----4) roll + inclination roll with cooler (roll Ø 405 mm) width 1650mm    several relief rolls with the machine-----5) flying shear haco 2000mm wide-----including dryer somos, mixing silos, suction sytem for basic products SOLD IN ONE LOT WITH EXTRUSION LINE Z10A 4251 (JOHNSON-SPATEN)EXTRUSIONLINES WITH CO-EXTRUSION FOR PRODUCTION OF ABS, EPDM & PE PLATES---CO-EXTRUSION OF PLATES WITH DIFFERENT TOP & BOTTOM LAYER----MAX EXTRUSION WIDTH: 1650 MM, THICKNESS: 15 MM----TOTAL PRODUCTION IN 1 YEAR (2 LINES) = 1.700.000KGS----DAVIS-STANDARD:1) MAIN EXTRUDER TYP 45 IN 45 HT MOTOR: 187.5 KW @ 380V CAP: 15000W-----2) 2 X CO-EXTRUDERS 15-IN-20 CAP: MOTOR:-----3) EXTRUSION HEAD WIDTH 2000 MM-----4) ROLL + INCLINATION ROLL WITH COOLER (ROLL Ø 405 MM) WIDTH 1650MM SEVERAL RELIEF ROLLS WITH THE MACHINE-----5) FLYING SHEAR HACO 2000MM WIDE-----INCLUDING DRYER SOMOS, MIXING SILOS, SUCTION SYTEM FOR BASIC PRODUCTS
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-technical data:
	-pressure capacity 110 t
	-working width 3100 mm
	-clearance between the stands 2600 mm
	-table width 180 mm
	-throat depth 250 mm
	-height 325 mm
	-delivery speed 70 mm / sec.
	-work speed 7 mm / sec.
	-retraction speed 60 mm / sec.
	-stroke 120 mm
	-adjustment range fixed stops 120 mm
	-drive 400 v / 7.5 kw
	-space requirement approx.              b 3500 x h 2300 x 1600 mm
	-weight approx.				          	7500 kg
	-with:-swing-arm control panel with cnc control
				cybelec dnc 80 (bj. 2001) y 1 + 2;  x
-back gauge (x)
-pointed tool, 4-way universal die - two hand control console, footswitch
 TECHNICAL DATA: -PRESSURE CAPACITY 110 T -WORKING WIDTH 3100 MM -CLEARANCE BETWEEN THE STANDS 2600 MM -TABLE WIDTH 180 MM -THROAT DEPTH 250 MM -HEIGHT 325 MM -DELIVERY SPEED 70 MM / SEC. -WORK SPEED 7 MM / SEC. -RETRACTION SPEED 60 MM / SEC. -STROKE 120 MM -ADJUSTMENT RANGE FIXED STOPS 120 MM -DRIVE 400 V / 7.5 KW -SPACE REQUIREMENT APPROX. B 3500 X H 2300 X 1600 MM -WEIGHT APPROX. 7500 KG -WITH:-SWING-ARM CONTROL PANEL WITH CNC CONTROL CYBELEC DNC 80 (BJ. 2001) Y 1 + 2; X -BACK GAUGE (X) -POINTED TOOL, 4-WAY UNIVERSAL DIE - TWO HAND CONTROL CONSOLE, FOOTSWITCH
Vendedor: Mieth Maschinenhandel
Año de construcción: usado
Ubicación: Land-metal table with wooden surface METAL TABLE WITH WOODEN SURFACE
Vendedor: APT International
Año de construcción: usado
Precio: 4.000 €
Ubicación: Land-year: 2003
manufactured: belgium
capacity: 250/6 mm YEAR: 2003 MANUFACTURED: BELGIUM CAPACITY: 250/6 MM
Vendedor: occasionmachines
Año de construcción: usado
Ubicación: Land-there are two machines available, beaming width: 1800mm, beam diameter: 1000mm, yarn type:  nm 4,5-9, beaming speed: 20-800m/min, length: 2100mm, width: 4150mm, including warp creels for 480 spools, spool diameter: 280mm, year of construction machine 1/ 2: 1993/ 1994.  THERE ARE TWO MACHINES AVAILABLE, BEAMING WIDTH: 1800MM, BEAM DIAMETER: 1000MM, YARN TYPE: NM 4,5-9, BEAMING SPEED: 20-800M/MIN, LENGTH: 2100MM, WIDTH: 4150MM, INCLUDING WARP CREELS FOR 480 SPOOLS, SPOOL DIAMETER: 280MM, YEAR OF CONSTRUCTION MACHINE 1/ 2: 1993/ 1994.
Vendedor: Innovac GmbH
Año de construcción: usado
Ubicación: Land-capacities:steel: 3000 x 3 mm - 2000 x 5 mm - 1000 x 10 mmalu: 3000 x 6 mmcnc atl 600 CAPACITIES:STEEL: 3000 X 3 MM - 2000 X 5 MM - 1000 X 10 MMALU: 3000 X 6 MMCNC ATL 600
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-manufactured by haco(belgium)
year of manufacture 2001
control: sp 8
max. plate thickness, mm 6
max. plate width, mm 3050
number of plate holders: 18
cutting angle, degrees 0,5...3,0
backgauge motor power, kw 0,44
backgauge stroke, mm 750
main drive power, kw 7,5
voltage, v 380
frequency, hz 50
machine dimensions, mm 3880 x 1650 x 1700
machine weight, kg 4500

the shear is in nice condition. machine is fully complete and without oil leaks. it is equipped with additional knife. MANUFACTURED BY HACO(BELGIUM) YEAR OF MANUFACTURE 2001 CONTROL: SP 8 MAX. PLATE THICKNESS, MM 6 MAX. PLATE WIDTH, MM 3050 NUMBER OF PLATE HOLDERS: 18 CUTTING ANGLE, DEGREES 0,5...3,0 BACKGAUGE MOTOR POWER, KW 0,44 BACKGAUGE STROKE, MM 750 MAIN DRIVE POWER, KW 7,5 VOLTAGE, V 380 FREQUENCY, HZ 50 MACHINE DIMENSIONS, MM 3880 X 1650 X 1700 MACHINE WEIGHT, KG 4500 THE SHEAR IS IN NICE CONDITION. MACHINE IS FULLY COMPLETE AND WITHOUT OIL LEAKS. IT IS EQUIPPED WITH ADDITIONAL KNIFE.
Vendedor: SCG, uab
Año de construcción: usado
Ubicación: Land-pneumatic fingerheightcnc pc1 PNEUMATIC FINGERHEIGHTCNC PC1
Vendedor: APT International
Año de construcción: usado
Ubicación: Land-haco plate shear
type ts 306
built in 1982
voltage 380volt
material 3,000 x 6 mm
replacement blades are also available.

machine is still in use and is fully functional. it has been changed only the control. the material is clamped by the foot pedal and with a manual switch, the blade moves up and down. this can certainly again be changed. HACO PLATE SHEAR TYPE TS 306 BUILT IN 1982 VOLTAGE 380VOLT MATERIAL 3,000 X 6 MM REPLACEMENT BLADES ARE ALSO AVAILABLE. MACHINE IS STILL IN USE AND IS FULLY FUNCTIONAL. IT HAS BEEN CHANGED ONLY THE CONTROL. THE MATERIAL IS CLAMPED BY THE FOOT PEDAL AND WITH A MANUAL SWITCH, THE BLADE MOVES UP AND DOWN. THIS CAN CERTAINLY AGAIN BE CHANGED.
Vendedor: W&T EFRA
Año de construcción: usado
Precio: 600 €
Ubicación: Land-; good ; GOOD
Vendedor: Fa. Uwe Schlammer Handels- und Vermittlungsagentur
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)