383 ofertas

Año de construcción: usado
Precio: 4.950 €
Ubicación: Land-combined saw, milling machine -, planing, drilling machine

planing width 310 mm
cutting length 865 mm
shaper fence for tool 㸠max 220 mm
built in 2008
weight 450 kg
l x w x h: 1.8 x 1.3 x 1.5 m

the machine is in good condition, ready to use.

subject to changes, errors, prior sale!

service/spare parts by matec ch-4952 eriswil/de-79618 rheinfelden

matec system + technology gmbh
mechanical engineering
mill mat 4
ch-4952 eriswil/switzerland

tel. 0041 62 966 18 32
fax 0041 62 966 21 12 
 COMBINED SAW, MILLING MACHINE -, PLANING, DRILLING MACHINE PLANING WIDTH 310 MM CUTTING LENGTH 865 MM SHAPER FENCE FOR TOOL ø MAX 220 MM BUILT IN 2008 WEIGHT 450 KG L X W X H: 1.8 X 1.3 X 1.5 M THE MACHINE IS IN GOOD CONDITION, READY TO USE. SUBJECT TO CHANGES, ERRORS, PRIOR SALE! SERVICE/SPARE PARTS BY MATEC CH-4952 ERISWIL/DE-79618 RHEINFELDEN MATEC SYSTEM + TECHNOLOGY GMBH MECHANICAL ENGINEERING MILL MAT 4 CH-4952 ERISWIL/SWITZERLAND TEL. 0041 62 966 18 32 FAX 0041 62 966 21 12
Vendedor: MATEC system+technik GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 14 kg<br/>dimensions (l x w x h) approx.: 800 x 600 x 350 mm<br/>description: different manufacturers and designs, various attachments (chisel) WEIGHT APPROX.: 14 KG
DIMENSIONS (L X W X H) APPROX.: 800 X 600 X 350 MM
DESCRIPTION: DIFFERENT MANUFACTURERS AND DESIGNS, VARIOUS ATTACHMENTS (CHISEL)
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 160 kg<br/>dimensions (l x w x h) approx.: 1340 x 950 x 1030 mm<br/>description: contents: vice leinen 125 j, drawer contents: hammers, pliers, files, screwdrivers, ratchet box, various thread inserts WEIGHT APPROX.: 160 KG
DIMENSIONS (L X W X H) APPROX.: 1340 X 950 X 1030 MM
DESCRIPTION: CONTENTS: VICE LEINEN 125 J, DRAWER CONTENTS: HAMMERS, PLIERS, FILES, SCREWDRIVERS, RATCHET BOX, VARIOUS THREAD INSERTS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 8.900 €
Ubicación: Land-aztech is a leading manufacturer of industrial machinery on the polish and foreign markets. our company deals with sale of new and used machines, which are covered by 12 months warranty, as well as a service after the warranty period.  in our offer you will find also spare parts for machines.
hammer crusher with horizontal effect of a number of highly effective, we can produce not big dimensions even 25 tonnes per hour (other versions up to 200 tons per hour). it is a machine for crushing of medium and fine grains. its maximum load is 300 mm (other versions up to 1000 mm), allowing the possibility to obtain a finished product with a grit that is adapted to your needs thanks to the movable rack (in the form of a thick from 0.5 mm up to 50 mm to the outlet sieve) at the material outlet. the crusher is used to chop up hard, medium-hard and soft raw materials with low moisture content, such as: limestone, granite, asphalt, charcoal, coal e, stone, concrete, brick, ceramic tiles, aluminium.                                                                                                                                                  we have different kinds of new, never used hammer crushers with different capacities and capabilities in continuous sale.
model - km/po/e-400 x 600 net price: â?¬8.900,00
the most important features: hammers and side walls are made of durable manganese-steel manufactured.
the dimensions of the bottom sieve can be adjusted according to the product group.

admission: 400 x 600 mm
load size (mm) - up to 550
finished product (mm) - 0.5-50
capacity (t / st) - up to 15
motor (kw) - 18.5
weight (kg) - 1700
note:
1. the specified yield refers to a material with a density of 1000 kg / m3.
2. our products are constantly updated and improved, az tech sp. z o.o. reserves the right to, parameters and design without prior notification of the user; 
3. the above product configuration is not a default configuration. at the time of purchase, request a detailed consultation.
we invite you to familiarize yourself with our offer and to visit our outlet in the province of province.
if no machines are in our offer, whose technical parameters match your requirements, using create and we make them happy for you.
machines are usually immediately ex stock available or available within a few weeks. we produce the most popular models ever.
we invite you to contact us.
your conversation partner tel: 570 884 633

AZTECH IS A LEADING MANUFACTURER OF INDUSTRIAL MACHINERY ON THE POLISH AND FOREIGN MARKETS. OUR COMPANY DEALS WITH SALE OF NEW AND USED MACHINES, WHICH ARE COVERED BY 12 MONTHS WARRANTY, AS WELL AS A SERVICE AFTER THE WARRANTY PERIOD. IN OUR OFFER YOU WILL FIND ALSO SPARE PARTS FOR MACHINES. HAMMER CRUSHER WITH HORIZONTAL EFFECT OF A NUMBER OF HIGHLY EFFECTIVE, WE CAN PRODUCE NOT BIG DIMENSIONS EVEN 25 TONNES PER HOUR (OTHER VERSIONS UP TO 200 TONS PER HOUR). IT IS A MACHINE FOR CRUSHING OF MEDIUM AND FINE GRAINS. ITS MAXIMUM LOAD IS 300 MM (OTHER VERSIONS UP TO 1000 MM), ALLOWING THE POSSIBILITY TO OBTAIN A FINISHED PRODUCT WITH A GRIT THAT IS ADAPTED TO YOUR NEEDS THANKS TO THE MOVABLE RACK (IN THE FORM OF A THICK FROM 0.5 MM UP TO 50 MM TO THE OUTLET SIEVE) AT THE MATERIAL OUTLET. THE CRUSHER IS USED TO CHOP UP HARD, MEDIUM-HARD AND SOFT RAW MATERIALS WITH LOW MOISTURE CONTENT, SUCH AS: LIMESTONE, GRANITE, ASPHALT, CHARCOAL, COAL E, STONE, CONCRETE, BRICK, CERAMIC TILES, ALUMINIUM. WE HAVE DIFFERENT KINDS OF NEW, NEVER USED HAMMER CRUSHERS WITH DIFFERENT CAPACITIES AND CAPABILITIES IN CONTINUOUS SALE. MODEL - KM/PO/E-400 X 600 NET PRICE: &ACIRC;?&NOT;8.900,00 THE MOST IMPORTANT FEATURES: HAMMERS AND SIDE WALLS ARE MADE OF DURABLE MANGANESE-STEEL MANUFACTURED. THE DIMENSIONS OF THE BOTTOM SIEVE CAN BE ADJUSTED ACCORDING TO THE PRODUCT GROUP. ADMISSION: 400 X 600 MM LOAD SIZE (MM) - UP TO 550 FINISHED PRODUCT (MM) - 0.5-50 CAPACITY (T / ST) - UP TO 15 MOTOR (KW) - 18.5 WEIGHT (KG) - 1700 NOTE: 1. THE SPECIFIED YIELD REFERS TO A MATERIAL WITH A DENSITY OF 1000 KG / M3. 2. OUR PRODUCTS ARE CONSTANTLY UPDATED AND IMPROVED, AZ TECH SP. Z O.O. RESERVES THE RIGHT TO, PARAMETERS AND DESIGN WITHOUT PRIOR NOTIFICATION OF THE USER; 3. THE ABOVE PRODUCT CONFIGURATION IS NOT A DEFAULT CONFIGURATION. AT THE TIME OF PURCHASE, REQUEST A DETAILED CONSULTATION. WE INVITE YOU TO FAMILIARIZE YOURSELF WITH OUR OFFER AND TO VISIT OUR OUTLET IN THE PROVINCE OF PROVINCE. IF NO MACHINES ARE IN OUR OFFER, WHOSE TECHNICAL PARAMETERS MATCH YOUR REQUIREMENTS, USING CREATE AND WE MAKE THEM HAPPY FOR YOU. MACHINES ARE USUALLY IMMEDIATELY EX STOCK AVAILABLE OR AVAILABLE WITHIN A FEW WEEKS. WE PRODUCE THE MOST POPULAR MODELS EVER. WE INVITE YOU TO CONTACT US. YOUR CONVERSATION PARTNER TEL: 570 884 633
Vendedor: Frau Iwona Wo?kowicz
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 1340 x 700 x 840 mm<br/>description: in total 3 drawers, contents: open-end wrenches, ring spanners, allen wrench sets, files, screwdrivers, hammers WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 1340 X 700 X 840 MM
DESCRIPTION: IN TOTAL 3 DRAWERS, CONTENTS: OPEN-END WRENCHES, RING SPANNERS, ALLEN WRENCH SETS, FILES, SCREWDRIVERS, HAMMERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-nominal mass of drop parts kg           3150 
rated striking energy                   80 kj 
max. no. of blows/min.                  56
distance clear between columns:         2800 mm.
working zone daylight:                  630 mm.
bottom die impression-to-floor distance:750 mm.
die impression size:                    600 x 340 mm.
steam/air pressure                      0.7-0.9 mpa
copressed air pressure                  0.6-0.8 mpa
overal dimensions                       5100x2490x5895 mm
mass (less anvil block)                 27,4 tons 
mass of anvil block                     47,2 tons 
  NOMINAL MASS OF DROP PARTS KG 3150 RATED STRIKING ENERGY 80 KJ MAX. NO. OF BLOWS/MIN. 56 DISTANCE CLEAR BETWEEN COLUMNS: 2800 MM. WORKING ZONE DAYLIGHT: 630 MM. BOTTOM DIE IMPRESSION-TO-FLOOR DISTANCE:750 MM. DIE IMPRESSION SIZE: 600 X 340 MM. STEAM/AIR PRESSURE 0.7-0.9 MPA COPRESSED AIR PRESSURE 0.6-0.8 MPA OVERAL DIMENSIONS 5100X2490X5895 MM MASS (LESS ANVIL BLOCK) 27,4 TONS MASS OF ANVIL BLOCK 47,2 TONS
Vendedor: Gewerbe Dmitri Perfilov
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 1340 x 1030 x 1080 mm<br/>description: contents: vice schlegel emf 150, jaw width approx. 160 mm, drawer contents: various number punches, hand chisel, electrical materials, hammers, marking tapes for self-adhesive cable ends WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 1340 X 1030 X 1080 MM
DESCRIPTION: CONTENTS: VICE SCHLEGEL EMF 150, JAW WIDTH APPROX. 160 MM, DRAWER CONTENTS: VARIOUS NUMBER PUNCHES, HAND CHISEL, ELECTRICAL MATERIALS, HAMMERS, MARKING TAPES FOR SELF-ADHESIVE CABLE ENDS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-fabrikationsnr.: cat3025clgbb03603, serial #: 0154635, 18.6 kw, bj: 2009, 2,745 kg, version: rubber tracks 300 x 52. 5wx, dozer blade b approx. 1,500 mm, handle incl. hammer piping, including digging bucket b approx. 450 mm, read operating hours: approx. 3.760 h,. cab protection open with lighting 
FABRIKATIONSNR.: CAT3025CLGBB03603, SERIAL #: 0154635, 18.6 KW, BJ: 2009, 2,745 KG, VERSION: RUBBER TRACKS 300 X 52. 5WX, DOZER BLADE B APPROX. 1,500 MM, HANDLE INCL. HAMMER PIPING, INCLUDING DIGGING BUCKET B APPROX. 450 MM, READ OPERATING HOURS: APPROX. 3.760 H,. CAB PROTECTION OPEN WITH LIGHTING
Vendedor: Karner & Dechow Industrie-Auktionen Ges.m.b.H.
Año de construcción: usado
Precio: used machinery auction RESALE 70 €
Ubicación: Land-weight approx.: 160 kg<br/>dimensions (l x w x h) approx.: 1350 x 700 x 860 mm<br/>description: contents: soldering irons, screwdrivers, twist drills, hammers, socket inserts, steel shell die stock, the vice at the left top side of the photo is not included in the scope of delivery! WEIGHT APPROX.: 160 KG
DIMENSIONS (L X W X H) APPROX.: 1350 X 700 X 860 MM
DESCRIPTION: CONTENTS: SOLDERING IRONS, SCREWDRIVERS, TWIST DRILLS, HAMMERS, SOCKET INSERTS, STEEL SHELL DIE STOCK, THE VICE AT THE LEFT TOP SIDE OF THE PHOTO IS NOT INCLUDED IN THE SCOPE OF DELIVERY!
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-the machines of an entire mill are available, this includes: (1) molassing machine (2) bag beating machine baumgarten (3) inclination scale seca: max. load: 150kg (4) 2x filler kiekiens cycloon (5) hammer mill tietjen v3 (6) sagging device (7) seed cleaner rÖber (8) 3x presses kiekens/ heesen boxtel/ loforsch & brosch (9) sagging scale vollenda: year of construction: 1955 (10) silos. THE MACHINES OF AN ENTIRE MILL ARE AVAILABLE, THIS INCLUDES: (1) MOLASSING MACHINE (2) BAG BEATING MACHINE BAUMGARTEN (3) INCLINATION SCALE SECA: MAX. LOAD: 150KG (4) 2X FILLER KIEKIENS CYCLOON (5) HAMMER MILL TIETJEN V3 (6) SAGGING DEVICE (7) SEED CLEANER RÖBER (8) 3X PRESSES KIEKENS/ HEESEN BOXTEL/ LOFORSCH & BROSCH (9) SAGGING SCALE VOLLENDA: YEAR OF CONSTRUCTION: 1955 (10) SILOS.
Vendedor: Innovac GmbH
Año de construcción: usado
Precio: used machinery auction RESALE 35 €
Ubicación: Land-weight approx.: 180 kg<br/>dimensions (l x w x h) approx.: 730 x 700 x 1000 mm<br/>description: 4 drawers, contents twist drills, hammers, open-end wrenches, pliers, etc. WEIGHT APPROX.: 180 KG
DIMENSIONS (L X W X H) APPROX.: 730 X 700 X 1000 MM
DESCRIPTION: 4 DRAWERS, CONTENTS TWIST DRILLS, HAMMERS, OPEN-END WRENCHES, PLIERS, ETC.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-engine was repaired in 2015	
forging weight: 250 kg	
impact force: 140	
drop height with normal forging: 600 mm	
engine power: 18.4 kw	
machine dimensions :	
2400 x 1550 x 2430 mm	
machine weight: 11400 kg	
 ENGINE WAS REPAIRED IN 2015 FORGING WEIGHT: 250 KG IMPACT FORCE: 140 DROP HEIGHT WITH NORMAL FORGING: 600 MM ENGINE POWER: 18.4 KW MACHINE DIMENSIONS : 2400 X 1550 X 2430 MM MACHINE WEIGHT: 11400 KG
Vendedor: AMARON s.r.o.
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 1100 mm<br/>description: 7 drawers, contents open-end wrenches, pliers, hammers, twist drills, screwdrivers, etc. WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 1100 MM
DESCRIPTION: 7 DRAWERS, CONTENTS OPEN-END WRENCHES, PLIERS, HAMMERS, TWIST DRILLS, SCREWDRIVERS, ETC.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tamrock commando 120 r
year: 2006
diesel: +/-2,400 hammer: +/-1,200
condition: ready to work
contact: info@bm-schroeder TAMROCK COMMANDO 120 R YEAR: 2006 DIESEL: +/-2,400 HAMMER: +/-1,200 CONDITION: READY TO WORK CONTACT: INFO@BM-SCHROEDER
Vendedor: BMS BauMaschinen Schröder
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 600 x 600 x 950 mm<br/>description: 4 drawers, contents open-end wrenches, hammers, lathe tools, jaws WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 600 X 600 X 950 MM
DESCRIPTION: 4 DRAWERS, CONTENTS OPEN-END WRENCHES, HAMMERS, LATHE TOOLS, JAWS
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 11.000 €
Ubicación: Land-schindler bushhammering machine
year 1996
type st-90
belt wide 90 cm
speed belt and height adjustable
good working condition

dismantled ready for loading SCHINDLER BUSHHAMMERING MACHINE YEAR 1996 TYPE ST-90 BELT WIDE 90 CM SPEED BELT AND HEIGHT ADJUSTABLE GOOD WORKING CONDITION DISMANTLED READY FOR LOADING
Vendedor: P.H. ALPHA
Año de construcción: usado
Precio: used machinery auction RESALE 105 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 1300 x 1000 x 1050 mm<br/>description: 2 drawers, contents open-end wrenches, pliers, twist drills, hammers, etc., vice leinen e 125 WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 1300 X 1000 X 1050 MM
DESCRIPTION: 2 DRAWERS, CONTENTS OPEN-END WRENCHES, PLIERS, TWIST DRILLS, HAMMERS, ETC., VICE LEINEN E 125
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 15 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 500 x 300 x 400 mm<br/>description: 1 set screwdrivers, socket inserts, allen wrenches, pliers, hammers etc. WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 500 X 300 X 400 MM
DESCRIPTION: 1 SET SCREWDRIVERS, SOCKET INSERTS, ALLEN WRENCHES, PLIERS, HAMMERS ETC.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 45 €
Ubicación: Land-weight approx.: 150 kg<br/>dimensions (l x w x h) approx.: 700 x 600 x 800 mm<br/>description: 4 drawers, contents open-end wrenches, hammers, pliers, screwdrivers, etc. WEIGHT APPROX.: 150 KG
DIMENSIONS (L X W X H) APPROX.: 700 X 600 X 800 MM
DESCRIPTION: 4 DRAWERS, CONTENTS OPEN-END WRENCHES, HAMMERS, PLIERS, SCREWDRIVERS, ETC.
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter

1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw

 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 2200 x 900 x 900 mm<br/>description: in total 9 drawers with various contents: open-end wrenches, screwdrivers, hammers, range of hollow punches WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 2200 X 900 X 900 MM
DESCRIPTION: IN TOTAL 9 DRAWERS WITH VARIOUS CONTENTS: OPEN-END WRENCHES, SCREWDRIVERS, HAMMERS, RANGE OF HOLLOW PUNCHES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-tietjen hammer mill
gdx 12
250 kw TIETJEN HAMMER MILL GDX 12 250 KW
Vendedor: Maschinen und Mühlenbau Benker
Año de construcción: usado
Precio: used machinery auction RESALE 80 €
Ubicación: Land-weight approx.: 200 kg<br/>dimensions (l x w x h) approx.: 740 x 700 x 1040 mm<br/>description: 7 drawers, contents number punches, standard parts for fixture construction, face milling cutters, milling heads, hammers in different sizes WEIGHT APPROX.: 200 KG
DIMENSIONS (L X W X H) APPROX.: 740 X 700 X 1040 MM
DESCRIPTION: 7 DRAWERS, CONTENTS NUMBER PUNCHES, STANDARD PARTS FOR FIXTURE CONSTRUCTION, FACE MILLING CUTTERS, MILLING HEADS, HAMMERS IN DIFFERENT SIZES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-i will sell a hammer mill and buhler, built in 1992. buhler dfze 700

sieve mill

hopper, fan with separator and filter.

rotary hopper 2 and split tile for the print media I WILL SELL A HAMMER MILL AND BUHLER, BUILT IN 1992. BUHLER DFZE 700 SIEVE MILL HOPPER, FAN WITH SEPARATOR AND FILTER. ROTARY HOPPER 2 AND SPLIT TILE FOR THE PRINT MEDIA
Vendedor: Herr Krzysztof Grajny
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 2000 x 1100 x 1100 mm<br/>description: drawer contents hand tools such as pliers, hammers, splint pins, files, including 2 vices schlegel emf 150 and leinen f 150 WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 2000 X 1100 X 1100 MM
DESCRIPTION: DRAWER CONTENTS HAND TOOLS SUCH AS PLIERS, HAMMERS, SPLINT PINS, FILES, INCLUDING 2 VICES SCHLEGEL EMF 150 AND LEINEN F 150
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-i am selling a rustic hammer mill from buhler, capacity 20 t / h, spare hammers, from 4 mm to 10 mm, complete, very good condition, complete with slide and funnel, cellaser.    I AM SELLING A RUSTIC HAMMER MILL FROM BUHLER, CAPACITY 20 T / H, SPARE HAMMERS, FROM 4 MM TO 10 MM, COMPLETE, VERY GOOD CONDITION, COMPLETE WITH SLIDE AND FUNNEL, CELLASER.
Vendedor: Herr Krzysztof Grajny
Año de construcción: usado
Precio: used machinery auction RESALE 85 €
Ubicación: Land-weight approx.: 8 kg<br/>dimensions (l x w x h) approx.: 550 x 350 x 400 mm<br/>description: 1 x hr 2460, 780 w, 1 x 1050 w WEIGHT APPROX.: 8 KG
DIMENSIONS (L X W X H) APPROX.: 550 X 350 X 400 MM
DESCRIPTION: 1 X HR 2460, 780 W, 1 X 1050 W
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 127.305 €
Ubicación: Land-hammer mill wynveen hammer mill hm, s/n 670-1150 and sullage nederman hammer mills, transport fans, storage bunkers, anschlussluftkanã¤le, automatic, fadenfã¶rderer, cyclone with rotary valve, flap with flange motor, dust filter HAMMER MILL WYNVEEN HAMMER MILL HM, S/N 670-1150 AND SULLAGE NEDERMAN HAMMER MILLS, TRANSPORT FANS, STORAGE BUNKERS, ANSCHLUSSLUFTKAN&ATILDE;&CURREN;LE, AUTOMATIC, FADENF&ATILDE;&PARA;RDERER, CYCLONE WITH ROTARY VALVE, FLAP WITH FLANGE MOTOR, DUST FILTER
Vendedor: SIA "Alfa Agro",
Año de construcción: usado
Precio: used machinery auction RESALE 65 €
Ubicación: Land-weight approx.: 6 kg<br/>dimensions (l x w x h) approx.: 400 x 300 x 250 mm<br/>description: aske 636, 320 w, 1,5 a, asse 636, 230w yom 2014 WEIGHT APPROX.: 6 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 250 MM
DESCRIPTION: ASKE 636, 320 W, 1,5 A, ASSE 636, 230W YOM 2014
Vendedor: Surplex GmbH
Año de construcción: usado
Precio: 690 €
Ubicación: Land-dimensions:
width: 70 cm
height: 100 cm
depth: 45 cm
weight: approx. 150 kg (incl. contents)

content:
1.lade socket wrench inserts 3 set 2.lade ring and open-end wrench 3 set
3.lade screwdriver with bit being set 4.lade pliers and hammers
5.lade screwdrivers with handle 6.lade electric (cable lugs and binder)
7.lade empty

DIMENSIONS: WIDTH: 70 CM HEIGHT: 100 CM DEPTH: 45 CM WEIGHT: APPROX. 150 KG (INCL. CONTENTS) CONTENT: 1.LADE SOCKET WRENCH INSERTS 3 SET 2.LADE RING AND OPEN-END WRENCH 3 SET 3.LADE SCREWDRIVER WITH BIT BEING SET 4.LADE PLIERS AND HAMMERS 5.LADE SCREWDRIVERS WITH HANDLE 6.LADE ELECTRIC (CABLE LUGS AND BINDER) 7.LADE EMPTY
Vendedor: 3W Handelsgesellschaft m.b.H
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 30 kg<br/>dimensions (l x w x h) approx.: 630 x 400 x 800 mm<br/>description: contents open-end wrenches, hammers, screwdrivers WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 630 X 400 X 800 MM
DESCRIPTION: CONTENTS OPEN-END WRENCHES, HAMMERS, SCREWDRIVERS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-forging hammer meitinger rational
-15-04-005
shipping time: immediately

number: 15-04-004

manufacturer: meitinger
type: rational

machine data
year: circa 1970
l x w x h: approx. 1200 x 500 x 1600 mm
weight: 350 kg

very good condition

technical data
bear weight: approx. 25 kg
hub (continuously): approx. 230 mm
stroke: approx. 180 stroke/min
power: approx. 1,8 kw
anvil size: approx. 500 x 180 mm
throat depth: 350 mm
height: approx. 250 mm
power consumption: 400 v / 16 a

accessories
â?¢ 2 piece stamp
â?¢ 1 piece die
â?¢ foot switch

other accessories on request
price and other specifications on request FORGING HAMMER MEITINGER RATIONAL -15-04-005 SHIPPING TIME: IMMEDIATELY NUMBER: 15-04-004 MANUFACTURER: MEITINGER TYPE: RATIONAL MACHINE DATA YEAR: CIRCA 1970 L X W X H: APPROX. 1200 X 500 X 1600 MM WEIGHT: 350 KG VERY GOOD CONDITION TECHNICAL DATA BEAR WEIGHT: APPROX. 25 KG HUB (CONTINUOUSLY): APPROX. 230 MM STROKE: APPROX. 180 STROKE/MIN POWER: APPROX. 1,8 KW ANVIL SIZE: APPROX. 500 X 180 MM THROAT DEPTH: 350 MM HEIGHT: APPROX. 250 MM POWER CONSUMPTION: 400 V / 16 A ACCESSORIES &ACIRC;?&CENT; 2 PIECE STAMP &ACIRC;?&CENT; 1 PIECE DIE &ACIRC;?&CENT; FOOT SWITCH OTHER ACCESSORIES ON REQUEST PRICE AND OTHER SPECIFICATIONS ON REQUEST
Vendedor: KAI-Tec Technologie-Vertrieb GmbH & Co.KG
Año de construcción: usado
Precio: used machinery auction RESALE 40 €
Ubicación: Land-weight approx.: 3 kg<br/>dimensions (l x w x h) approx.: 400 x 300 x 250 mm<br/>description: angle grinder fein wss 12-125, 1200 w, diameter 125 mm, impact drill askeu 636 kinetik, 300 w WEIGHT APPROX.: 3 KG
DIMENSIONS (L X W X H) APPROX.: 400 X 300 X 250 MM
DESCRIPTION: ANGLE GRINDER FEIN WSS 12-125, 1200 W, DIAMETER 125 MM, IMPACT DRILL ASKEU 636 KINETIK, 300 W
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 3.800 €
Ubicación: Land-weight approx.: 1400 kg<br/>dimensions (l x w x h) approx.: 1100 x 2950 x 1300 mm<br/>description: complete with pneumatic hammer daap model dk90l and pipes. diesel fuel, two-cylinder engine deutz, see photos WEIGHT APPROX.: 1400 KG
DIMENSIONS (L X W X H) APPROX.: 1100 X 2950 X 1300 MM
DESCRIPTION: COMPLETE WITH PNEUMATIC HAMMER DAAP MODEL DK90L AND PIPES. DIESEL FUEL, TWO-CYLINDER ENGINE DEUTZ, SEE PHOTOS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea
 TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Ubicación: Land-make mikropul gmbh, type acm-10, mounted on frame , with switchgear , grinder classifier system, material stainless steel , grinding room size dia. 310mm, fixed hammers , with grinding track , inlet dia. 50mm, feeding with rotating valve , motor 7,5 kw 380 volt , 1,1 kw 220/380 volt, floorspace ± 3,3 x 2,2 m, total height 2,7 m, weight ± 1600 kg, extra specifications 1x ventilator van tongeren kennemer type s395/3/4800 11kw, 400/690 volt, 1x dosing screw dia. 225mm 0,37 kw, 220/380 volt, 1x dustcollector donaldson tdp675 230 volt, 1x cyclonefilter :van tongeren kennemer type ac850/3.0, 1x cabinet. +++ overhauled +++size reduction millsgrinders > size reduction mills what you can expect from foeth: ?machine is in working condition ?at a reduced price compared to new ?ready for shipping to any destination worldwide ?you are welcome to inspect the machine in barneveld, the netherlands. visit our website foeth dot com for many more machines! MAKE MIKROPUL GMBH, TYPE ACM-10, MOUNTED ON FRAME , WITH SWITCHGEAR , GRINDER CLASSIFIER SYSTEM, MATERIAL STAINLESS STEEL , GRINDING ROOM SIZE DIA. 310MM, FIXED HAMMERS , WITH GRINDING TRACK , INLET DIA. 50MM, FEEDING WITH ROTATING VALVE , MOTOR 7,5 KW 380 VOLT , 1,1 KW 220/380 VOLT, FLOORSPACE ± 3,3 X 2,2 M, TOTAL HEIGHT 2,7 M, WEIGHT ± 1600 KG, EXTRA SPECIFICATIONS 1X VENTILATOR VAN TONGEREN KENNEMER TYPE S395/3/4800 11KW, 400/690 VOLT, 1X DOSING SCREW DIA. 225MM 0,37 KW, 220/380 VOLT, 1X DUSTCOLLECTOR DONALDSON TDP675 230 VOLT, 1X CYCLONEFILTER :VAN TONGEREN KENNEMER TYPE AC850/3.0, 1X CABINET. +++ OVERHAULED +++SIZE REDUCTION MILLSGRINDERS > SIZE REDUCTION MILLS WHAT YOU CAN EXPECT FROM FOETH: ?MACHINE IS IN WORKING CONDITION ?AT A REDUCED PRICE COMPARED TO NEW ?READY FOR SHIPPING TO ANY DESTINATION WORLDWIDE ?YOU ARE WELCOME TO INSPECT THE MACHINE IN BARNEVELD, THE NETHERLANDS. VISIT OUR WEBSITE FOETH DOT COM FOR MANY MORE MACHINES!
Vendedor: Foeth
Año de construcción: usado
Ubicación: Land-6ton/3ton air hammer and 7inch/6inch/6inch upsetter



1. 6ton air drop hammer

make:erie(usa)

installation year:1996

rated power:6ton

cylinder bore:558mm

stroke:1270mm

ram to sow block minium:508mm

between guides:762mm

ram front back:965mm

front back:1803mm

left right:3556mm

hight above floor ft.&:0~533mm

head room to drop in rod ft.&:177mm~

 

2. 3ton air drop hammer

make:banning(usa)

installation year:1996

blow energy:12500kgm

type:double column forging machine

stroke:1250mm

number of strokes per minute:125/min

max. dieheihgt:700mm

anvil weight:60ton

machine total weight:90ton

 

3.  7inch(177mm)upsetter

make: azax(usa)

installation year;1979

width of dies:711.2mm

height of dies:889mmmm

thickness of dies:304.8mm

stroke of header:508mm

stroke of dies:241.3mm

motor:93kw

upsetter pressure:1750ton

stroke per minute:25

motor rpm:870



4.  6inch(152mm)upsetter

make: national(usa)

installation year;1983

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:508mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:870

 

5.  6inch(152mm)upsetter

make: national(usa)

installation year;1988

width of dies:660.4mm

height of dies:812.8mmmm

thickness of dies:282.5mmmm

stroke of header:457.2mm

stroke of dies:165.1mm

motor:75kw

upsetter pressure:1300ton

stroke per minute:27

motor rpm:860

 

6. billet shear caddy 80

make:peddinghaus(germany)

installation year;1991

shear pressure:400ton

stroke rate(idling):51/min

drive:45kw,380v

air pressure:5~6psi

machine weight:11.3ton

machine size:2275 x3250 x1950mm

 

7. billet shear caddy 50

make:peddinghaus(germany)

installation year;2006

shear pressure:90ton

stroke rate(idling):63/min

drive:11kw,380v

air pressure:5~kgf/cm2

machine weight:2150kg

machine size:1350 x2080 x1330mm

 

8. 600ton trimming press

make:hosung(korea)

installation year:1996

working force:600ton

length of stroke:350mm

spm:26

dieheight:730mm

opening height:1080mm

adjustment slide:200mm

slide area:1150mm x1280mm

bolster area:1200x1300mm

side opening:730x880mm

working height:750mm

air pressure:5kg/cm2

die cushion :40ton

die cushion stroke:180mm

diecushion area of pad:810mm x810mm

main motor:45kw x 6p

 

9. 630ton trimming press

make:hosung(korea)

installation year:1978

working force:630ton

length of stroke:400mm

spm:20

shutheight::570mm

bed area:1250mm x1250mm

ram area:1000x1000mm

air pressure:5kg/cm2

main motor:61kw

floor space:3600mm x3470mm

 

10.compressor

make:kobe(japan)

installation year:1983

motro:255kw



---------------------------------------------------------- 
bmj korea co.,ltd.
director: jongduk baek
fax: +82-51-719-9678
mobile: +82-10-7499-2567
e-mail: whitebel64@gmail.com
address: 4f, 27-8, gukjegeumyung-ro 8-gil,
yeongdeungpo-gu, seoul, korea
 6TON/3TON AIR HAMMER AND 7INCH/6INCH/6INCH UPSETTER 1. 6TON AIR DROP HAMMER MAKE:ERIE(USA) INSTALLATION YEAR:1996 RATED POWER:6TON CYLINDER BORE:558MM STROKE:1270MM RAM TO SOW BLOCK MINIUM:508MM BETWEEN GUIDES:762MM RAM FRONT BACK:965MM FRONT BACK:1803MM LEFT RIGHT:3556MM HIGHT ABOVE FLOOR FT.&:0~533MM HEAD ROOM TO DROP IN ROD FT.&:177MM~ 2. 3TON AIR DROP HAMMER MAKE:BANNING(USA) INSTALLATION YEAR:1996 BLOW ENERGY:12500KGM TYPE:DOUBLE COLUMN FORGING MACHINE STROKE:1250MM NUMBER OF STROKES PER MINUTE:125/MIN MAX. DIEHEIHGT:700MM ANVIL WEIGHT:60TON MACHINE TOTAL WEIGHT:90TON 3. 7INCH(177MM)UPSETTER MAKE: AZAX(USA) INSTALLATION YEAR;1979 WIDTH OF DIES:711.2MM HEIGHT OF DIES:889MMMM THICKNESS OF DIES:304.8MM STROKE OF HEADER:508MM STROKE OF DIES:241.3MM MOTOR:93KW UPSETTER PRESSURE:1750TON STROKE PER MINUTE:25 MOTOR RPM:870 4. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1983 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:508MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:870 5. 6INCH(152MM)UPSETTER MAKE: NATIONAL(USA) INSTALLATION YEAR;1988 WIDTH OF DIES:660.4MM HEIGHT OF DIES:812.8MMMM THICKNESS OF DIES:282.5MMMM STROKE OF HEADER:457.2MM STROKE OF DIES:165.1MM MOTOR:75KW UPSETTER PRESSURE:1300TON STROKE PER MINUTE:27 MOTOR RPM:860 6. BILLET SHEAR CADDY 80 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;1991 SHEAR PRESSURE:400TON STROKE RATE(IDLING):51/MIN DRIVE:45KW,380V AIR PRESSURE:5~6PSI MACHINE WEIGHT:11.3TON MACHINE SIZE:2275 X3250 X1950MM 7. BILLET SHEAR CADDY 50 MAKE:PEDDINGHAUS(GERMANY) INSTALLATION YEAR;2006 SHEAR PRESSURE:90TON STROKE RATE(IDLING):63/MIN DRIVE:11KW,380V AIR PRESSURE:5~KGF/CM2 MACHINE WEIGHT:2150KG MACHINE SIZE:1350 X2080 X1330MM 8. 600TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1996 WORKING FORCE:600TON LENGTH OF STROKE:350MM SPM:26 DIEHEIGHT:730MM OPENING HEIGHT:1080MM ADJUSTMENT SLIDE:200MM SLIDE AREA:1150MM X1280MM BOLSTER AREA:1200X1300MM SIDE OPENING:730X880MM WORKING HEIGHT:750MM AIR PRESSURE:5KG/CM2 DIE CUSHION :40TON DIE CUSHION STROKE:180MM DIECUSHION AREA OF PAD:810MM X810MM MAIN MOTOR:45KW X 6P 9. 630TON TRIMMING PRESS MAKE:HOSUNG(KOREA) INSTALLATION YEAR:1978 WORKING FORCE:630TON LENGTH OF STROKE:400MM SPM:20 SHUTHEIGHT::570MM BED AREA:1250MM X1250MM RAM AREA:1000X1000MM AIR PRESSURE:5KG/CM2 MAIN MOTOR:61KW FLOOR SPACE:3600MM X3470MM 10.COMPRESSOR MAKE:KOBE(JAPAN) INSTALLATION YEAR:1983 MOTRO:255KW ---------------------------------------------------------- BMJ KOREA CO.,LTD. DIRECTOR: JONGDUK BAEK FAX: +82-51-719-9678 MOBILE: +82-10-7499-2567 E-MAIL: WHITEBEL64@GMAIL.COM ADDRESS: 4F, 27-8, GUKJEGEUMYUNG-RO 8-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA
Vendedor: BMJ KOREA
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 30 kg<br/>dimensions (l x w x h) approx.: 710 x 710 x 520 mm<br/>description: with 3 hand drills, 2 x duax, 1 x fein dse 648, 740 w/3,8 a, drilling diameter 16 mm, 0 to 360 rpm, steplessly adjustable, 2 magnetic stands without dial gauges, 2 cordless screwdrivers panasonic ey 6225, 3.6 v, with 4 batteries and battery charger, allen wrench, hammers, further tools WEIGHT APPROX.: 30 KG
DIMENSIONS (L X W X H) APPROX.: 710 X 710 X 520 MM
DESCRIPTION: WITH 3 HAND DRILLS, 2 X DUAX, 1 X FEIN DSE 648, 740 W/3,8 A, DRILLING DIAMETER 16 MM, 0 TO 360 RPM, STEPLESSLY ADJUSTABLE, 2 MAGNETIC STANDS WITHOUT DIAL GAUGES, 2 CORDLESS SCREWDRIVERS PANASONIC EY 6225, 3.6 V, WITH 4 BATTERIES AND BATTERY CHARGER, ALLEN WRENCH, HAMMERS, FURTHER TOOLS
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-engine type: hammer mill
manufacturer: jensen
available: 2 identical systems
type: 1600
capacity: 25t / h wheat
year of manufacture: 2007
scope of delivery:
electric actuator 300kw
triple screw unit
hard part extractor
control cabinet with contactors for drives
various spare parts, screens, racket, racket bolt, 6 complete racket, spacers, wear panels, screen frame... ENGINE TYPE: HAMMER MILL MANUFACTURER: JENSEN AVAILABLE: 2 IDENTICAL SYSTEMS TYPE: 1600 CAPACITY: 25T / H WHEAT YEAR OF MANUFACTURE: 2007 SCOPE OF DELIVERY: ELECTRIC ACTUATOR 300KW TRIPLE SCREW UNIT HARD PART EXTRACTOR CONTROL CABINET WITH CONTACTORS FOR DRIVES VARIOUS SPARE PARTS, SCREENS, RACKET, RACKET BOLT, 6 COMPLETE RACKET, SPACERS, WEAR PANELS, SCREEN FRAME...
Vendedor: Firma Roscher
Año de construcción: usado
Precio: used machinery auction RESALE 200 €
Ubicación: Land-weight approx.: 250 kg<br/>dimensions (l x w x h) approx.: 750 x 750 x 1000 mm<br/>description: - content consisting of: screw drivers, allen keys, open-end wrenches, one torque spanner with different nuts, tips, spacers, tongs, hammers, milling cutters as well as a lot of grinding devices WEIGHT APPROX.: 250 KG
DIMENSIONS (L X W X H) APPROX.: 750 X 750 X 1000 MM
DESCRIPTION: - CONTENT CONSISTING OF: SCREW DRIVERS, ALLEN KEYS, OPEN-END WRENCHES, ONE TORQUE SPANNER WITH DIFFERENT NUTS, TIPS, SPACERS, TONGS, HAMMERS, MILLING CUTTERS AS WELL AS A LOT OF GRINDING DEVICES
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-brand mecfond 
model os2-4000
thrust: 400 ton
model: s2-4000-2800-1600
worktop dimensions: 2,800x1,600 mm
sled base dimensions: 2.800x1.600 mm
hammer adjustment: 300 mm
stroke: 450 mm
hits at min.: 16-24 c/min.
light at pmi: 1,000 mm
maximum height of closed mould: 500 mm
cushions: 2
cushion stroke: 200 mm
main motor power: 50 kw
quantity of presses available: n°2
for more information contact us at 030 725026 or visit our website.
from monday to friday from 8:30 to 13:00 and from 14:00 to 19:00. BRAND MECFOND MODEL OS2-4000 THRUST: 400 TON MODEL: S2-4000-2800-1600 WORKTOP DIMENSIONS: 2,800X1,600 MM SLED BASE DIMENSIONS: 2.800X1.600 MM HAMMER ADJUSTMENT: 300 MM STROKE: 450 MM HITS AT MIN.: 16-24 C/MIN. LIGHT AT PMI: 1,000 MM MAXIMUM HEIGHT OF CLOSED MOULD: 500 MM CUSHIONS: 2 CUSHION STROKE: 200 MM MAIN MOTOR POWER: 50 KW QUANTITY OF PRESSES AVAILABLE: N°2 FOR MORE INFORMATION CONTACT US AT 030 725026 OR VISIT OUR WEBSITE. FROM MONDAY TO FRIDAY FROM 8:30 TO 13:00 AND FROM 14:00 TO 19:00.
Vendedor: Remarketin Way s.r.l,
Año de construcción: usado
Precio: used machinery auction RESALE 50 €
Ubicación: Land-weight approx.: 60 kg<br/>dimensions (l x w x h) approx.: 950 x 480 x 1020 mm<br/>description: with tools and hand drill fein 648, 740 w/3,7 a, drilling diameter 16 mm, 0 to 360 rpm steplessly adjustable, hammers, screwdriver, pliers, ring spanners, hacksaw WEIGHT APPROX.: 60 KG
DIMENSIONS (L X W X H) APPROX.: 950 X 480 X 1020 MM
DESCRIPTION: WITH TOOLS AND HAND DRILL FEIN 648, 740 W/3,7 A, DRILLING DIAMETER 16 MM, 0 TO 360 RPM STEPLESSLY ADJUSTABLE, HAMMERS, SCREWDRIVER, PLIERS, RING SPANNERS, HACKSAW
Vendedor: Surplex GmbH
Año de construcción: usado
Ubicación: Land-filling: big bag
screw length: 4600 mm
height of the mill: approx. 4000 mm
floor area of the mill: 1800 x 1200 mm
condition: good
availability: as of now
technical documentation: available

template container and screw the company josef unsold engineering.
machine is sold without sieves.  FILLING: BIG BAG SCREW LENGTH: 4600 MM HEIGHT OF THE MILL: APPROX. 4000 MM FLOOR AREA OF THE MILL: 1800 X 1200 MM CONDITION: GOOD AVAILABILITY: AS OF NOW TECHNICAL DOCUMENTATION: AVAILABLE TEMPLATE CONTAINER AND SCREW THE COMPANY JOSEF UNSOLD ENGINEERING. MACHINE IS SOLD WITHOUT SIEVES.
Vendedor: MVRG UG (haftungsbeschränkt) & Co. KG
Año de construcción: usado
Precio: 2.500 €
Ubicación: Land-AT Austria, 3800 Göpfritz an der Wild
Vendedor: Biringer International GmbH
Año de construcción: usado
Precio: 2.750 €
Ubicación: Land-AT Austria, 3800 Göpfritz an der Wild
Vendedor: Biringer International GmbH
Usted no ha encontrado su máquina deseada? enviar consulta a todos los distribuidores (no hay registro necesario)
more HAMMER types: